fix uno/ultimo harddisk detection

[vuplus_openvuplus_3.0] / meta-bsp / bm750 / recipes / linux / linux-vuplus-3.9.6 / linux-sata_bcm7335.patch

diff --git a/meta-bsp/bm750/recipes/linux/linux-vuplus-3.9.6/linux-sata_bcm7335.patch b/meta-bsp/bm750/recipes/linux/linux-vuplus-3.9.6/linux-sata_bcm7335.patch
deleted file mode 100644 (file)
index cbfc4b7..0000000
--- a/meta-bsp/bm750/recipes/linux/linux-vuplus-3.9.6/linux-sata_bcm7335.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-diff --git a/drivers/ata/sata_brcmstb.c b/drivers/ata/sata_brcmstb.c
-index 7ba20e0..1e2e947 100644
---- a/drivers/ata/sata_brcmstb.c
-+++ b/drivers/ata/sata_brcmstb.c
-@@ -330,6 +330,22 @@ static void brcm_EnableOOBWindowFix(void __iomem *mmio_base, int port)
-       mdio_write_reg(mmio_base, port, 0x0D, sval);
- }
- 
-+static void brcm_Enable256AlignDetection(void __iomem *mmio_base, int port)
-+{
-+        uint32_t tmp32;
-+        void __iomem *port_mmio;
-+
-+        port_mmio = PORT_BASE(mmio_base, port);
-+
-+        tmp32 = readl(port_mmio + K2_SATA_SICR1_OFFSET);
-+        tmp32 |= 0x08000000;
-+        writel(tmp32, port_mmio + K2_SATA_SICR1_OFFSET);
-+
-+        tmp32 = readl(port_mmio + K2_SATA_SICR2_OFFSET);
-+        tmp32 |= 0x00800000;
-+        writel(tmp32, port_mmio + K2_SATA_SICR2_OFFSET);
-+}
-+
- static void brcm_AnalogReset(void __iomem *mmio_base, int port)
- {
-       /* do analog reset */
-@@ -385,6 +401,8 @@ static void brcm_InitSata_1_5Gb(void __iomem *mmio_base, int port)
-       brcm_SetPllTxRxCtrl(mmio_base, port);
-       brcm_EnableOOBWindowFix(mmio_base, port);
- 
-+      brcm_Enable256AlignDetection(mmio_base, port);
-+
-       if (!port) {
- #ifdef CONFIG_BRCM_SATA_75MHZ_PLL
-               /* use 75Mhz PLL clock */
-@@ -446,6 +464,8 @@ static void brcm_InitSata2_3Gb(void __iomem *mmio_base, int port)
-       brcm_SetPllTxRxCtrl(mmio_base, port);
-       brcm_EnableOOBWindowFix(mmio_base, port);
- 
-+      brcm_Enable256AlignDetection(mmio_base, port);
-+
-       if (!port) {
- #ifdef CONFIG_BRCM_SATA_75MHZ_PLL
-               /* use 75Mhz PLL clock */
-@@ -1135,7 +1155,9 @@ static int k2_sata_resume(struct device *dev)
-               ap = host->ports[i];
- 
-               ata_for_each_link(link, ap, EDGE) {
-+                      spin_unlock_irqrestore(&hp->lock, flags);
-                       sata_std_hardreset(link, NULL, 1000);
-+                      spin_lock_irqsave(&hp->lock, flags);
-               }
-       }
-