code.vuplus.com Git - vuplus_openembedded/blob - conf/machine/micro2440.conf

   1 #@TYPE: Machine
   2 #@Name: FriendlyARM micro2440
   3 #@DESCRIPTION: Machine configuration for FriendlyARM micro2440 Samsung 2440 based board
   4
   5 TARGET_ARCH = "arm"
   6
   7 IMAGE_DEVICE_TABLES = "files/device_table-minimal.txt \
   8                        files/device_table_add-s3c_serial.txt"
   9
  10 PREFERRED_VERSION_u-boot = "git"
  11 UBOOT_MACHINE = "mini2440_config"
  12 UBOOT_ENTRYPOINT = "30008000"
  13
  14 PREFERRED_PROVIDER_virtual/kernel = "linux-mini2440"
  15
  16 # This can be used as alternative, stable kernel
  17 # PREFERRED_PROVIDER_virtual/kernel = "linux"
  18 # PREFERRED_VERSION_linux = "2.6.29"
  19
  20
  21 # This is not necessarily true, there is a 800x480 display as well
  22 MACHINE_DISPLAY_WIDTH_PIXELS = "240"
  23 MACHINE_DISPLAY_HEIGHT_PIXELS = "320"
  24 MACHINE_DISPLAY_ORIENTATION = "0"
  25 MACHINE_DISPLAY_PPI = "110"
  26 # used by matchbox-panel large icons look ok on both displays
  27 GUI_MACHINE_CLASS = "bigscreen"
  28
  29 # used by sysvinit
  30 SERIAL_CONSOLE = "115200 ttySAC0"
  31
  32 IMAGE_FSTYPES = "jffs2 tar.gz"
  33
  34 MACHINE_FEATURES = "kernel26 touchscreen screen usbhost usbgadget sound alsa ethernet mmc mmcroot i2c spi"
  35 MACHINE_EXTRA_RDEPENDS = "rt73-firmware"
  36
  37 require conf/machine/include/tune-arm920t.inc
  38
  39 KERNEL_IMAGETYPE = "uImage"
  40 EXTRA_IMAGECMD_jffs2 = "--pad --little-endian -e16KiB -n \
  41         ; sumtool -e16KiB --no-cleanmarkers \
  42         --littleendian --pad \
  43         -i ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \
  44         -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2.summary"