1 #include <lib/dvb/dvb.h>
2 #include <lib/dvb/sec.h>
3 #include <lib/dvb/rotor_calc.h>
4 #include <lib/dvb/dvbtime.h>
8 #if HAVE_DVB_API_VERSION < 3
9 #define FREQUENCY Frequency
11 #define FREQUENCY frequency
13 #include <lib/base/eerror.h>
18 #define eSecDebug(arg...) eDebug(arg)
20 #define eSecDebug(arg...)
23 DEFINE_REF(eDVBSatelliteEquipmentControl);
25 eDVBSatelliteEquipmentControl *eDVBSatelliteEquipmentControl::instance;
27 int eDVBSatelliteEquipmentControl::m_params[MAX_PARAMS];
29 defaults are set in python lib/python/Components/NimManager.py
30 in InitSecParams function via setParam call
33 void eDVBSatelliteEquipmentControl::setParam(int param, int value)
35 if (param >= 0 && param < MAX_PARAMS)
36 m_params[param]=value;
39 eDVBSatelliteEquipmentControl::eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends, eSmartPtrList<eDVBRegisteredFrontend> &avail_simulate_frontends)
40 :m_lnbidx((sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters))-1), m_curSat(m_lnbs[0].m_satellites.end()), m_avail_frontends(avail_frontends), m_avail_simulate_frontends(avail_simulate_frontends), m_rotorMoving(0)
47 #define eSecDebugNoSimulate(x...) \
54 // eDebugNoNewLine("SIMULATE:"); \
58 int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite &sat, iDVBFrontend *fe, int slot_id, int *highest_score_lnb)
60 bool simulate = ((eDVBFrontend*)fe)->is_simulate();
61 bool direct_connected = m_not_linked_slot_mask & slot_id;
62 int score=0, satcount=0;
63 long linked_prev_ptr=-1, linked_next_ptr=-1, linked_csw=-1, linked_ucsw=-1, linked_toneburst=-1,
64 fe_satpos_depends_ptr=-1, fe_rotor_pos=-1;
65 bool linked_in_use = false;
67 eSecDebugNoSimulate("direct_connected %d", !!direct_connected);
69 fe->getData(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr);
70 fe->getData(eDVBFrontend::LINKED_NEXT_PTR, linked_next_ptr);
71 fe->getData(eDVBFrontend::SATPOS_DEPENDS_PTR, fe_satpos_depends_ptr);
73 // first we search the linkage base frontend and check if any tuner in prev direction is used
74 while (linked_prev_ptr != -1)
76 eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr;
77 if (linked_fe->m_inuse)
79 fe = linked_fe->m_frontend;
80 linked_fe->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, (long&)linked_prev_ptr);
83 fe->getData(eDVBFrontend::ROTOR_POS, fe_rotor_pos);
85 // now check also the linked tuners is in use
86 while (!linked_in_use && linked_next_ptr != -1)
88 eDVBRegisteredFrontend *linked_fe = (eDVBRegisteredFrontend*) linked_next_ptr;
89 if (linked_fe->m_inuse)
91 linked_fe->m_frontend->getData(eDVBFrontend::LINKED_NEXT_PTR, (long&)linked_next_ptr);
94 // when a linked in use tuner is found we get the tuner data...
97 fe->getData(eDVBFrontend::CSW, linked_csw);
98 fe->getData(eDVBFrontend::UCSW, linked_ucsw);
99 fe->getData(eDVBFrontend::TONEBURST, linked_toneburst);
102 if (highest_score_lnb)
103 *highest_score_lnb = -1;
105 eSecDebugNoSimulate("canTune %d", slot_id);
107 for (int idx=0; idx <= m_lnbidx; ++idx )
110 eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx];
111 bool is_unicable = lnb_param.SatCR_idx != -1;
112 bool is_unicable_position_switch = lnb_param.SatCR_positions > 1;
114 if ( lnb_param.m_slot_mask & slot_id ) // lnb for correct tuner?
117 eDVBSatelliteDiseqcParameters &di_param = lnb_param.m_diseqc_parameters;
119 eSecDebugNoSimulate("lnb %d found", idx);
121 satcount += lnb_param.m_satellites.size();
123 std::map<int, eDVBSatelliteSwitchParameters>::iterator sit =
124 lnb_param.m_satellites.find(sat.orbital_position);
125 if ( sit != lnb_param.m_satellites.end())
129 satpos_depends_ptr=fe_satpos_depends_ptr,
130 csw = di_param.m_committed_cmd,
131 ucsw = di_param.m_uncommitted_cmd,
132 toneburst = di_param.m_toneburst_param,
133 rotor_pos = fe_rotor_pos;
135 eSecDebugNoSimulate("sat %d found", sat.orbital_position);
137 if ( sat.frequency > lnb_param.m_lof_threshold )
139 if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical))
142 if (di_param.m_diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0)
145 if ( di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO )
146 csw = 0xF0 | (csw << 2);
148 if (di_param.m_committed_cmd <= eDVBSatelliteDiseqcParameters::SENDNO)
151 if ( di_param.m_diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2 ) // ROTOR
162 if (sat.no_rotor_command_on_tune && !rotor) {
163 eSecDebugNoSimulate("no rotor but no_rotor_command_on_tune is set.. ignore lnb %d", idx);
167 eSecDebugNoSimulate("ret1 %d", ret);
169 if (linked_in_use && !is_unicable)
171 // compare tuner data
172 if ( (csw != linked_csw) ||
173 ( diseqc && (ucsw != linked_ucsw || toneburst != linked_toneburst) ) ||
174 ( rotor && rotor_pos != sat.orbital_position ) )
180 eSecDebugNoSimulate("ret2 %d", ret);
182 else if ((satpos_depends_ptr != -1) && !(is_unicable && is_unicable_position_switch))
184 eSecDebugNoSimulate("satpos depends");
185 eDVBRegisteredFrontend *satpos_depends_to_fe = (eDVBRegisteredFrontend*) satpos_depends_ptr;
186 if (direct_connected) // current fe is direct connected.. (can turn the rotor)
188 if (satpos_depends_to_fe->m_inuse) // if the dependent frontend is in use?
190 if (!rotor || rotor_pos != sat.orbital_position) // new orbital position not equal to current orbital pos?
195 eSecDebugNoSimulate("ret3 %d", ret);
197 else // current fe is dependent of another tuner ... (so this fe can't turn the rotor!)
199 // get current orb pos of the tuner with rotor connection
200 satpos_depends_to_fe->m_frontend->getData(eDVBFrontend::ROTOR_POS, rotor_pos);
201 if (!rotor || rotor_pos == -1 /* we dont know the rotor position yet */
202 || rotor_pos != sat.orbital_position ) // not the same orbital position?
207 eSecDebugNoSimulate("ret4 %d", ret);
210 if (ret && rotor && rotor_pos != -1)
211 ret -= abs(rotor_pos-sat.orbital_position);
213 eSecDebugNoSimulate("ret5 %d", ret);
215 if (ret && !is_unicable)
217 int lof = sat.frequency > lnb_param.m_lof_threshold ?
218 lnb_param.m_lof_hi : lnb_param.m_lof_lo;
219 int tuner_freq = abs(sat.frequency - lof);
220 if (tuner_freq < 900000 || tuner_freq > 2200000)
224 if (ret && lnb_param.m_prio != -1)
225 ret = lnb_param.m_prio;
227 eSecDebugNoSimulate("ret %d, score old %d", ret, score);
231 if (highest_score_lnb)
232 *highest_score_lnb = idx;
234 eSecDebugNoSimulate("score new %d", score);
238 if (score && satcount)
240 if (score > (satcount-1))
241 score -= (satcount-1);
243 score = 1; // min score
245 if (score && direct_connected)
246 score += 5; // increase score for tuners with direct sat connection
247 eSecDebugNoSimulate("final score %d", score);
251 bool need_turn_fast(int turn_speed)
253 if (turn_speed == eDVBSatelliteRotorParameters::FAST)
255 else if (turn_speed != eDVBSatelliteRotorParameters::SLOW)
257 int begin = turn_speed >> 16; // high word is start time
258 int end = turn_speed&0xFFFF; // low word is end time
259 time_t now_time = ::time(0);
261 localtime_r(&now_time, &nowTime);
262 int now = (nowTime.tm_hour + 1) * 60 + nowTime.tm_min + 1;
263 bool neg = end <= begin;
269 if ((now >= begin && now < end) ^ neg)
275 #define VOLTAGE(x) (lnb_param.m_increased_voltage ? iDVBFrontend::voltage##x##_5 : iDVBFrontend::voltage##x)
277 #define eDebugNoSimulate(x...) \
284 // eDebugNoNewLine("SIMULATE:"); \
288 RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int slot_id, unsigned int tunetimeout)
290 bool simulate = ((eDVBFrontend*)&frontend)->is_simulate();
292 if (canTune(sat, &frontend, slot_id, &lnb_idx))
294 eDVBSatelliteLNBParameters &lnb_param = m_lnbs[lnb_idx];
295 eDVBSatelliteDiseqcParameters &di_param = lnb_param.m_diseqc_parameters;
296 eDVBSatelliteRotorParameters &rotor_param = lnb_param.m_rotor_parameters;
298 std::map<int, eDVBSatelliteSwitchParameters>::iterator sit =
299 lnb_param.m_satellites.find(sat.orbital_position);
300 if ( sit != lnb_param.m_satellites.end())
302 eSecCommandList sec_sequence;
303 eDVBSatelliteSwitchParameters &sw_param = sit->second;
304 bool doSetFrontend = true;
305 bool doSetVoltageToneFrontend = true;
306 bool forceChanged = false;
307 bool needDiSEqCReset = false;
309 voltage = iDVBFrontend::voltageOff,
310 tone = iDVBFrontend::toneOff,
311 csw = di_param.m_committed_cmd,
312 ucsw = di_param.m_uncommitted_cmd,
313 toneburst = di_param.m_toneburst_param,
319 satposDependPtr = -1;
320 iDVBFrontend *sec_fe=&frontend;
321 eDVBRegisteredFrontend *linked_fe = 0;
322 eDVBSatelliteDiseqcParameters::t_diseqc_mode diseqc_mode = di_param.m_diseqc_mode;
323 eDVBSatelliteSwitchParameters::t_voltage_mode voltage_mode = sw_param.m_voltage_mode;
324 bool diseqc13V = voltage_mode == eDVBSatelliteSwitchParameters::HV_13;
325 bool is_unicable = lnb_param.SatCR_idx != -1;
327 lnb_param.guard_offset = 0; //HACK
329 frontend.setData(eDVBFrontend::SATCR, lnb_param.SatCR_idx);
332 voltage_mode = eDVBSatelliteSwitchParameters::HV;
334 frontend.getData(eDVBFrontend::SATPOS_DEPENDS_PTR, satposDependPtr);
336 if (!(m_not_linked_slot_mask & slot_id)) // frontend with direct connection?
338 long linked_prev_ptr;
339 frontend.getData(eDVBFrontend::LINKED_PREV_PTR, linked_prev_ptr);
340 while (linked_prev_ptr != -1)
342 linked_fe = (eDVBRegisteredFrontend*) linked_prev_ptr;
343 sec_fe = linked_fe->m_frontend;
344 sec_fe->getData(eDVBFrontend::LINKED_PREV_PTR, (long&)linked_prev_ptr);
346 if (satposDependPtr != -1) // we dont need uncommitted switch and rotor cmds on second output of a rotor lnb
347 diseqc_mode = eDVBSatelliteDiseqcParameters::V1_0;
349 // in eDVBFrontend::tuneLoop we call closeFrontend and ->inc_use() in this this condition (to put the kernel frontend thread into idle state)
350 // so we must resend all diseqc stuff (voltage is disabled when the frontend is closed)
352 sec_fe->getState(state);
353 if (!linked_fe->m_inuse && state != eDVBFrontend::stateIdle)
358 sec_fe->getData(eDVBFrontend::CSW, lastcsw);
359 sec_fe->getData(eDVBFrontend::UCSW, lastucsw);
360 sec_fe->getData(eDVBFrontend::TONEBURST, lastToneburst);
361 sec_fe->getData(eDVBFrontend::ROTOR_CMD, lastRotorCmd);
362 sec_fe->getData(eDVBFrontend::ROTOR_POS, curRotorPos);
364 if (lastcsw == lastucsw && lastToneburst == lastucsw && lastucsw == -1)
365 needDiSEqCReset = true;
367 if ( sat.frequency > lnb_param.m_lof_threshold )
369 if (!(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical))
372 int lof = (band&1)?lnb_param.m_lof_hi:lnb_param.m_lof_lo;
377 int local= abs(sat.frequency
379 parm.FREQUENCY = ((((local * 2) / 125) + 1) / 2) * 125;
380 frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - parm.FREQUENCY);
382 if ( voltage_mode == eDVBSatelliteSwitchParameters::_14V
383 || ( sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical
384 && voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
385 voltage = VOLTAGE(13);
386 else if ( voltage_mode == eDVBSatelliteSwitchParameters::_18V
387 || ( !(sat.polarisation & eDVBFrontendParametersSatellite::Polarisation_Vertical)
388 && voltage_mode == eDVBSatelliteSwitchParameters::HV ) )
389 voltage = VOLTAGE(18);
390 if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::ON)
391 || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && (band&1) ) )
392 tone = iDVBFrontend::toneOn;
393 else if ( (sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::OFF)
394 || ( sw_param.m_22khz_signal == eDVBSatelliteSwitchParameters::HILO && !(band&1) ) )
395 tone = iDVBFrontend::toneOff;
399 int tmp1 = abs(sat.frequency
403 + lnb_param.guard_offset;
404 int tmp2 = ((((tmp1 * 2) / 4000) + 1) / 2) * 4000;
405 parm.FREQUENCY = lnb_param.SatCRvco - (tmp1-tmp2) + lnb_param.guard_offset;
406 lnb_param.UnicableTuningWord = ((tmp2 / 4000)
407 | ((band & 1) ? 0x400 : 0) //HighLow
408 | ((band & 2) ? 0x800 : 0) //VertHor
409 | ((lnb_param.LNBNum & 1) ? 0 : 0x1000) //Umschaltung LNB1 LNB2
410 | (lnb_param.SatCR_idx << 13)); //Adresse des SatCR
411 eDebug("[prepare] UnicableTuningWord %#04x",lnb_param.UnicableTuningWord);
412 eDebug("[prepare] guard_offset %d",lnb_param.guard_offset);
413 frontend.setData(eDVBFrontend::FREQ_OFFSET, (lnb_param.UnicableTuningWord & 0x3FF) *4000 + 1400000 + lof - (2 * (lnb_param.SatCRvco - (tmp1-tmp2))) );
416 if (diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0)
418 if ( di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO )
419 csw = 0xF0 | (csw << 2);
421 if (di_param.m_committed_cmd <= eDVBSatelliteDiseqcParameters::SENDNO)
425 (di_param.m_committed_cmd != eDVBSatelliteDiseqcParameters::SENDNO);
426 bool changed_csw = send_csw && (forceChanged || csw != lastcsw);
429 (di_param.m_uncommitted_cmd && diseqc_mode > eDVBSatelliteDiseqcParameters::V1_0);
430 bool changed_ucsw = send_ucsw && (forceChanged || ucsw != lastucsw);
433 (di_param.m_toneburst_param != eDVBSatelliteDiseqcParameters::NO);
434 bool changed_burst = send_burst && (forceChanged || toneburst != lastToneburst);
436 int send_mask = 0; /*
439 4 send toneburst first
440 8 send toneburst at end */
441 if (changed_burst) // toneburst first and toneburst changed
443 if (di_param.m_command_order&1)
457 if ((di_param.m_command_order&4) && send_csw)
459 if (di_param.m_command_order==4 && send_burst)
464 if ( di_param.m_use_fast
465 && di_param.m_committed_cmd < eDVBSatelliteDiseqcParameters::SENDNO
467 && ((csw / 4) == (lastcsw / 4)) )
468 eDebugNoSimulate("dont send committed cmd (fast diseqc)");
472 if (!(di_param.m_command_order&4) && send_ucsw)
474 if (!(di_param.m_command_order&1) && send_burst)
480 eDebugNoNewLine("sendmask: ");
481 for (int i=3; i >= 0; --i)
482 if ( send_mask & (1<<i) )
483 eDebugNoNewLine("1");
485 eDebugNoNewLine("0");
488 if (doSetVoltageToneFrontend)
491 bool useGotoXX = false;
492 if ( diseqc_mode == eDVBSatelliteDiseqcParameters::V1_2
493 && !sat.no_rotor_command_on_tune )
495 if (sw_param.m_rotorPosNum) // we have stored rotor pos?
496 RotorCmd=sw_param.m_rotorPosNum;
497 else // we must calc gotoxx cmd
499 eDebugNoSimulate("Entry for %d,%d? not in Rotor Table found... i try gotoXX?", sat.orbital_position / 10, sat.orbital_position % 10 );
502 double SatLon = abs(sat.orbital_position)/10.00,
503 SiteLat = rotor_param.m_gotoxx_parameters.m_latitude,
504 SiteLon = rotor_param.m_gotoxx_parameters.m_longitude;
506 if ( rotor_param.m_gotoxx_parameters.m_la_direction == eDVBSatelliteRotorParameters::SOUTH )
509 if ( rotor_param.m_gotoxx_parameters.m_lo_direction == eDVBSatelliteRotorParameters::WEST )
510 SiteLon = 360 - SiteLon;
512 eDebugNoSimulate("siteLatitude = %lf, siteLongitude = %lf, %lf degrees", SiteLat, SiteLon, SatLon );
513 double satHourAngle =
514 calcSatHourangle( SatLon, SiteLat, SiteLon );
515 eDebugNoSimulate("PolarmountHourAngle=%lf", satHourAngle );
517 static int gotoXTable[10] =
518 { 0x00, 0x02, 0x03, 0x05, 0x06, 0x08, 0x0A, 0x0B, 0x0D, 0x0E };
520 if (SiteLat >= 0) // Northern Hemisphere
522 int tmp=(int)round( fabs( 180 - satHourAngle ) * 10.0 );
523 RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ];
525 if (satHourAngle < 180) // the east
530 else // Southern Hemisphere
532 if (satHourAngle < 180) // the east
534 int tmp=(int)round( fabs( satHourAngle ) * 10.0 );
535 RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ];
540 int tmp=(int)round( fabs( 360 - satHourAngle ) * 10.0 );
541 RotorCmd = (tmp/10)*0x10 + gotoXTable[ tmp % 10 ];
545 eDebugNoSimulate("RotorCmd = %04x", RotorCmd);
551 int vlt = iDVBFrontend::voltageOff;
552 eSecCommand::pair compare;
554 compare.tone = iDVBFrontend::toneOff;
555 sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
556 sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
557 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE_DISABLE_BEFORE_DISEQC]) );
560 vlt = iDVBFrontend::voltage13;
561 else if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
563 if (rotor_param.m_inputpower_parameters.m_use)
564 vlt = VOLTAGE(18); // in input power mode set 18V for measure input power
566 vlt = VOLTAGE(13); // in normal mode start turning with 13V
571 // check if voltage is already correct..
572 compare.voltage = vlt;
574 sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
576 // check if voltage is disabled
577 compare.voltage = iDVBFrontend::voltageOff;
579 sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
581 // voltage is changed... use DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS
582 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, vlt) );
583 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS]) );
584 sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +3) );
586 // voltage was disabled.. use DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS
587 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, vlt) );
588 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS]) );
590 sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_SWITCHPARMS) );
593 eDVBDiseqcCommand diseqc;
594 memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
596 diseqc.data[0] = 0xE0;
600 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
601 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_RESET_CMD]) );
603 // diseqc peripherial powersupply on
604 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
605 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_DISEQC_PERIPHERIAL_POWERON_CMD]) );
608 for (int seq_repeat = 0; seq_repeat < (di_param.m_seq_repeat?2:1); ++seq_repeat)
612 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) );
613 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_TONEBURST]) );
623 loops <<= di_param.m_repeats;
625 for ( int i = 0; i < loops;) // fill commands...
627 eDVBDiseqcCommand diseqc;
628 memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
630 diseqc.data[0] = i ? 0xE1 : 0xE0;
631 diseqc.data[1] = 0x10;
632 if ( (send_mask & 2) && (di_param.m_command_order & 4) )
634 diseqc.data[2] = 0x39;
635 diseqc.data[3] = ucsw;
637 else if ( send_mask & 1 )
639 diseqc.data[2] = 0x38;
640 diseqc.data[3] = csw;
642 else // no committed command confed.. so send uncommitted..
644 diseqc.data[2] = 0x39;
645 diseqc.data[3] = ucsw;
647 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
653 if (diseqc.data[2] == 0x38 && (send_mask & 2))
655 else if (diseqc.data[2] == 0x39 && (send_mask & 1))
657 int tmp = m_params[DELAY_BETWEEN_DISEQC_REPEATS];
660 int delay = di_param.m_repeats ? (tmp - 54) / 2 : tmp; // standard says 100msek between two repeated commands
661 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay) );
663 diseqc.data[3]=(cmd==0x38) ? csw : ucsw;
664 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
667 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay ) );
669 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) );
671 else // delay 120msek when no command is in repeat gap
672 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, tmp) );
675 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) );
678 if ( send_mask & 8 ) // toneburst at end of sequence
680 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_TONEBURST, di_param.m_toneburst_param) );
681 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_TONEBURST]) );
684 if (di_param.m_seq_repeat && seq_repeat == 0)
685 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_BEFORE_SEQUENCE_REPEAT]) );
689 eDebugNoSimulate("RotorCmd %02x, lastRotorCmd %02lx", RotorCmd, lastRotorCmd);
690 if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
692 eSecCommand::pair compare;
693 if (!send_mask && !is_unicable)
696 compare.tone = iDVBFrontend::toneOff;
697 sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
698 sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
699 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_CONT_TONE_DISABLE_BEFORE_DISEQC]) );
701 compare.voltage = iDVBFrontend::voltageOff;
703 // the next is a check if voltage is switched off.. then we first set a voltage :)
704 // else we set voltage after all diseqc stuff..
705 sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) );
707 if (rotor_param.m_inputpower_parameters.m_use)
708 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) ); // set 18V for measure input power
710 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) ); // in normal mode start turning with 13V
712 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_MOTOR_CMD]) ); // wait 750ms when voltage was disabled
713 sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +9) ); // no need to send stop rotor cmd and recheck voltage
716 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_BETWEEN_SWITCH_AND_MOTOR_CMD]) ); // wait 700ms when diseqc changed
718 eDVBDiseqcCommand diseqc;
719 memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
721 diseqc.data[0] = 0xE0;
722 diseqc.data[1] = 0x31; // positioner
723 diseqc.data[2] = 0x60; // stop
724 sec_sequence.push_back( eSecCommand(eSecCommand::IF_ROTORPOS_VALID_GOTO, +5) );
725 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
726 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) );
727 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
728 // wait 150msec after send rotor stop cmd
729 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_MOTOR_STOP_CMD]) );
731 diseqc.data[0] = 0xE0;
732 diseqc.data[1] = 0x31; // positioner
736 diseqc.data[2] = 0x6E; // drive to angular position
737 diseqc.data[3] = ((RotorCmd & 0xFF00) / 0x100);
738 diseqc.data[4] = RotorCmd & 0xFF;
743 diseqc.data[2] = 0x6B; // goto stored sat position
744 diseqc.data[3] = RotorCmd;
745 diseqc.data[4] = 0x00;
749 int mrt = m_params[MOTOR_RUNNING_TIMEOUT]; // in seconds!
750 if ( rotor_param.m_inputpower_parameters.m_use && !is_unicable)
751 { // use measure rotor input power to detect rotor state
752 bool turn_fast = need_turn_fast(rotor_param.m_inputpower_parameters.m_turning_speed);
753 eSecCommand::rotor cmd;
754 eSecCommand::pair compare;
756 compare.voltage = VOLTAGE(18);
758 compare.voltage = VOLTAGE(13);
760 sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
761 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
762 // measure idle power values
765 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec after voltage change
766 sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 1) );
768 sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
769 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(13)) );
771 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER]) ); // wait 150msec before measure
772 sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_IDLE_INPUTPOWER, 0) );
774 sec_sequence.push_back( eSecCommand(eSecCommand::IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, compare) );
775 ////////////////////////////
776 sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_DISEQC_RETRYS, m_params[MOTOR_COMMAND_RETRIES]) ); // 2 retries
777 sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) );
778 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
779 sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, 40) ); // 2 seconds rotor start timout
781 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // 50msec delay
782 sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) );
783 cmd.direction=1; // check for running rotor
784 cmd.deltaA=rotor_param.m_inputpower_parameters.m_delta;
787 sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) ); // check if rotor has started
788 sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout .. we assume now the rotor is already at the correct position
789 sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // goto loop start
790 sec_sequence.push_back( eSecCommand(eSecCommand::IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO, turn_fast ? 10 : 9 ) ); // timeout .. we assume now the rotor is already at the correct position
791 sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -8) ); // goto loop start
793 sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) );
795 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, VOLTAGE(18)) );
796 sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, mrt*20) ); // mrt is in seconds... our SLEEP time is 50ms.. so * 20
797 // rotor running loop
798 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 50) ); // wait 50msec
799 sec_sequence.push_back( eSecCommand(eSecCommand::MEASURE_RUNNING_INPUTPOWER) );
800 cmd.direction=0; // check for stopped rotor
802 sec_sequence.push_back( eSecCommand(eSecCommand::IF_INPUTPOWER_DELTA_GOTO, cmd ) );
803 sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +2 ) ); // timeout ? this should never happen
804 sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -4) ); // running loop start
805 /////////////////////
806 sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
807 sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) );
810 { // use normal turning mode
811 if (curRotorPos != -1)
813 mrt = abs(curRotorPos - sat.orbital_position);
817 mrt += 10; // round a little bit
818 mrt *= 2000; // (we assume a very slow rotor with just 0.5 degree per second here)
820 mrt += 3; // a little bit overhead
822 doSetVoltageToneFrontend=false;
824 eSecCommand::rotor cmd;
825 eSecCommand::pair compare;
826 compare.voltage = VOLTAGE(13);
828 sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
829 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, compare.voltage) );
830 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD]) ); // wait 150msec after voltage change
832 sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_ROTORPARMS) );
833 sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_MOVING) );
834 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
835 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 1000) ); // sleep one second before change voltage or tone
837 compare.voltage = voltage;
839 sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // correct final voltage?
840 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 2000) ); // wait 2 second before set high voltage
841 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) );
844 sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
845 sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) );
846 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_FINAL_CONT_TONE_CHANGE]) );
847 sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND, 0) );
849 cmd.direction=1; // check for running rotor
853 sec_sequence.push_back( eSecCommand(eSecCommand::SET_TIMEOUT, mrt*4) ); // mrt is in seconds... our SLEEP time is 250ms.. so * 4
854 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 250) ); // 250msec delay
855 sec_sequence.push_back( eSecCommand(eSecCommand::IF_TUNER_LOCKED_GOTO, cmd ) );
856 sec_sequence.push_back( eSecCommand(eSecCommand::IF_TIMEOUT_GOTO, +5 ) );
857 sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -3) ); // goto loop start
858 sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_ROTORPARAMS) );
859 sec_sequence.push_back( eSecCommand(eSecCommand::SET_ROTOR_STOPPED) );
860 sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, +4) );
861 sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT, tunetimeout) );
862 sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND, 1) );
863 sec_sequence.push_back( eSecCommand(eSecCommand::GOTO, -5) );
865 eDebug("set rotor timeout to %d seconds", mrt);
866 sec_fe->setData(eDVBFrontend::NEW_ROTOR_CMD, RotorCmd);
867 sec_fe->setData(eDVBFrontend::NEW_ROTOR_POS, sat.orbital_position);
874 sec_sequence.push_back( eSecCommand(eSecCommand::INVALIDATE_CURRENT_SWITCHPARMS) );
878 sec_fe->setData(eDVBFrontend::NEW_CSW, csw);
879 sec_fe->setData(eDVBFrontend::NEW_UCSW, ucsw);
880 sec_fe->setData(eDVBFrontend::NEW_TONEBURST, di_param.m_toneburst_param);
882 if (doSetVoltageToneFrontend && !is_unicable)
884 eSecCommand::pair compare;
885 compare.voltage = voltage;
887 sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); // voltage already correct ?
888 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, voltage) );
889 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_FINAL_VOLTAGE_CHANGE]) );
891 sec_sequence.push_back( eSecCommand(eSecCommand::IF_TONE_GOTO, compare) );
892 sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, tone) );
893 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_FINAL_CONT_TONE_CHANGE]) );
896 sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_SWITCHPARMS) );
900 // check if voltage is disabled
901 eSecCommand::pair compare;
903 compare.voltage = iDVBFrontend::voltageOff;
904 sec_sequence.push_back( eSecCommand(eSecCommand::IF_NOT_VOLTAGE_GOTO, compare) );
905 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) );
906 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS] ) );
908 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage18_5) );
909 sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
910 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS]) ); // wait 20 ms after voltage change
912 eDVBDiseqcCommand diseqc;
913 memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
915 diseqc.data[0] = 0xE0;
916 diseqc.data[1] = 0x10;
917 diseqc.data[2] = 0x5A;
918 diseqc.data[3] = lnb_param.UnicableTuningWord >> 8;
919 diseqc.data[4] = lnb_param.UnicableTuningWord;
921 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
922 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) );
923 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) );
928 sec_sequence.push_back( eSecCommand(eSecCommand::START_TUNE_TIMEOUT, tunetimeout) );
929 sec_sequence.push_back( eSecCommand(eSecCommand::SET_FRONTEND, 1) );
932 sec_sequence.push_front( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeStatic) );
933 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, 500) );
934 sec_sequence.push_back( eSecCommand(eSecCommand::SET_POWER_LIMITING_MODE, eSecCommand::modeDynamic) );
936 frontend.setSecSequence(sec_sequence);
941 eDebugNoSimulate("found no useable satellite configuration for %s freq %d%s %s on orbital position (%d)",
942 sat.system ? "DVB-S2" : "DVB-S",
944 sat.polarisation == eDVBFrontendParametersSatellite::Polarisation_Horizontal ? "H" :
945 eDVBFrontendParametersSatellite::Polarisation_Vertical ? "V" :
946 eDVBFrontendParametersSatellite::Polarisation_CircularLeft ? "CL" : "CR",
947 sat.modulation == eDVBFrontendParametersSatellite::Modulation_Auto ? "AUTO" :
948 eDVBFrontendParametersSatellite::Modulation_QPSK ? "QPSK" :
949 eDVBFrontendParametersSatellite::Modulation_8PSK ? "8PSK" : "QAM16",
950 sat.orbital_position );
954 void eDVBSatelliteEquipmentControl::prepareTurnOffSatCR(iDVBFrontend &frontend, int satcr)
956 eSecCommandList sec_sequence;
958 // check if voltage is disabled
959 eSecCommand::pair compare;
960 compare.steps = +9; //only close frontend
961 compare.voltage = iDVBFrontend::voltageOff;
963 sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
964 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) );
965 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS]) );
967 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage18_5) );
968 sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
969 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS]) );
971 eDVBDiseqcCommand diseqc;
972 memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
974 diseqc.data[0] = 0xE0;
975 diseqc.data[1] = 0x10;
976 diseqc.data[2] = 0x5A;
977 diseqc.data[3] = satcr << 5;
978 diseqc.data[4] = 0x00;
980 sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
981 sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) );
982 sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) );
983 sec_sequence.push_back( eSecCommand(eSecCommand::DELAYED_CLOSE_FRONTEND) );
985 frontend.setSecSequence(sec_sequence);
988 RESULT eDVBSatelliteEquipmentControl::clear()
990 eSecDebug("eDVBSatelliteEquipmentControl::clear()");
991 for (int i=0; i <= m_lnbidx; ++i)
993 m_lnbs[i].m_satellites.clear();
994 m_lnbs[i].m_slot_mask = 0;
995 m_lnbs[i].m_prio = -1; // auto
999 m_not_linked_slot_mask=0;
1001 //reset some tuner configuration
1002 for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it)
1006 if (sscanf(it->m_frontend->getDescription(), "BCM450%c (internal)", &c) == 1 && !it->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, tmp) && tmp != -1)
1008 FILE *f=fopen("/proc/stb/tsmux/lnb_b_input", "w");
1009 if (!f || fwrite("B", 1, 1, f) != 1)
1010 eDebug("set /proc/stb/tsmux/lnb_b_input to B failed!! (%m)");
1013 eDebug("set /proc/stb/tsmux/lnb_b_input to B OK");
1017 it->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, -1);
1018 it->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, -1);
1019 it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1);
1020 it->m_frontend->setData(eDVBFrontend::ROTOR_POS, -1);
1021 it->m_frontend->setData(eDVBFrontend::ROTOR_CMD, -1);
1022 it->m_frontend->setData(eDVBFrontend::SATCR, -1);
1025 for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_simulate_frontends.begin()); it != m_avail_simulate_frontends.end(); ++it)
1027 it->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, -1);
1028 it->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, -1);
1029 it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1);
1030 it->m_frontend->setData(eDVBFrontend::ROTOR_POS, -1);
1031 it->m_frontend->setData(eDVBFrontend::ROTOR_CMD, -1);
1032 it->m_frontend->setData(eDVBFrontend::SATCR, -1);
1038 /* LNB Specific Parameters */
1039 RESULT eDVBSatelliteEquipmentControl::addLNB()
1041 if ( (m_lnbidx+1) < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters)))
1042 m_curSat=m_lnbs[++m_lnbidx].m_satellites.end();
1045 eDebug("no more LNB free... cnt is %d", m_lnbidx);
1048 eSecDebug("eDVBSatelliteEquipmentControl::addLNB(%d)", m_lnbidx);
1052 RESULT eDVBSatelliteEquipmentControl::setLNBSlotMask(int slotmask)
1054 eSecDebug("eDVBSatelliteEquipmentControl::setLNBSlotMask(%d)", slotmask);
1055 if ( currentLNBValid() )
1056 m_lnbs[m_lnbidx].m_slot_mask = slotmask;
1062 RESULT eDVBSatelliteEquipmentControl::setLNBLOFL(int lofl)
1064 eSecDebug("eDVBSatelliteEquipmentControl::setLNBLOFL(%d)", lofl);
1065 if ( currentLNBValid() )
1066 m_lnbs[m_lnbidx].m_lof_lo = lofl;
1072 RESULT eDVBSatelliteEquipmentControl::setLNBLOFH(int lofh)
1074 eSecDebug("eDVBSatelliteEquipmentControl::setLNBLOFH(%d)", lofh);
1075 if ( currentLNBValid() )
1076 m_lnbs[m_lnbidx].m_lof_hi = lofh;
1082 RESULT eDVBSatelliteEquipmentControl::setLNBThreshold(int threshold)
1084 eSecDebug("eDVBSatelliteEquipmentControl::setLNBThreshold(%d)", threshold);
1085 if ( currentLNBValid() )
1086 m_lnbs[m_lnbidx].m_lof_threshold = threshold;
1092 RESULT eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage(bool onoff)
1094 eSecDebug("eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage(%d)", onoff);
1095 if ( currentLNBValid() )
1096 m_lnbs[m_lnbidx].m_increased_voltage = onoff;
1102 RESULT eDVBSatelliteEquipmentControl::setLNBPrio(int prio)
1104 eSecDebug("eDVBSatelliteEquipmentControl::setLNBPrio(%d)", prio);
1105 if ( currentLNBValid() )
1106 m_lnbs[m_lnbidx].m_prio = prio;
1112 RESULT eDVBSatelliteEquipmentControl::setLNBNum(int LNBNum)
1114 eSecDebug("eDVBSatelliteEquipmentControl::setLNBNum(%d)", LNBNum);
1115 if(!((LNBNum >= 1) && (LNBNum <= MAX_LNBNUM)))
1117 if ( currentLNBValid() )
1118 m_lnbs[m_lnbidx].LNBNum = LNBNum;
1124 /* DiSEqC Specific Parameters */
1125 RESULT eDVBSatelliteEquipmentControl::setDiSEqCMode(int diseqcmode)
1127 eSecDebug("eDVBSatelliteEquipmentControl::setDiSEqcMode(%d)", diseqcmode);
1128 if ( currentLNBValid() )
1129 m_lnbs[m_lnbidx].m_diseqc_parameters.m_diseqc_mode = (eDVBSatelliteDiseqcParameters::t_diseqc_mode)diseqcmode;
1135 RESULT eDVBSatelliteEquipmentControl::setToneburst(int toneburst)
1137 eSecDebug("eDVBSatelliteEquipmentControl::setToneburst(%d)", toneburst);
1138 if ( currentLNBValid() )
1139 m_lnbs[m_lnbidx].m_diseqc_parameters.m_toneburst_param = (eDVBSatelliteDiseqcParameters::t_toneburst_param)toneburst;
1145 RESULT eDVBSatelliteEquipmentControl::setRepeats(int repeats)
1147 eSecDebug("eDVBSatelliteEquipmentControl::setRepeats(%d)", repeats);
1148 if ( currentLNBValid() )
1149 m_lnbs[m_lnbidx].m_diseqc_parameters.m_repeats=repeats;
1155 RESULT eDVBSatelliteEquipmentControl::setCommittedCommand(int command)
1157 eSecDebug("eDVBSatelliteEquipmentControl::setCommittedCommand(%d)", command);
1158 if ( currentLNBValid() )
1159 m_lnbs[m_lnbidx].m_diseqc_parameters.m_committed_cmd=command;
1165 RESULT eDVBSatelliteEquipmentControl::setUncommittedCommand(int command)
1167 eSecDebug("eDVBSatelliteEquipmentControl::setUncommittedCommand(%d)", command);
1168 if ( currentLNBValid() )
1169 m_lnbs[m_lnbidx].m_diseqc_parameters.m_uncommitted_cmd = command;
1175 RESULT eDVBSatelliteEquipmentControl::setCommandOrder(int order)
1177 eSecDebug("eDVBSatelliteEquipmentControl::setCommandOrder(%d)", order);
1178 if ( currentLNBValid() )
1179 m_lnbs[m_lnbidx].m_diseqc_parameters.m_command_order=order;
1185 RESULT eDVBSatelliteEquipmentControl::setFastDiSEqC(bool onoff)
1187 eSecDebug("eDVBSatelliteEquipmentControl::setFastDiSEqc(%d)", onoff);
1188 if ( currentLNBValid() )
1189 m_lnbs[m_lnbidx].m_diseqc_parameters.m_use_fast=onoff;
1195 RESULT eDVBSatelliteEquipmentControl::setSeqRepeat(bool onoff)
1197 eSecDebug("eDVBSatelliteEquipmentControl::setSeqRepeat(%d)", onoff);
1198 if ( currentLNBValid() )
1199 m_lnbs[m_lnbidx].m_diseqc_parameters.m_seq_repeat = onoff;
1205 /* Rotor Specific Parameters */
1206 RESULT eDVBSatelliteEquipmentControl::setLongitude(float longitude)
1208 eSecDebug("eDVBSatelliteEquipmentControl::setLongitude(%f)", longitude);
1209 if ( currentLNBValid() )
1210 m_lnbs[m_lnbidx].m_rotor_parameters.m_gotoxx_parameters.m_longitude=longitude;
1216 RESULT eDVBSatelliteEquipmentControl::setLatitude(float latitude)
1218 eSecDebug("eDVBSatelliteEquipmentControl::setLatitude(%f)", latitude);
1219 if ( currentLNBValid() )
1220 m_lnbs[m_lnbidx].m_rotor_parameters.m_gotoxx_parameters.m_latitude=latitude;
1226 RESULT eDVBSatelliteEquipmentControl::setLoDirection(int direction)
1228 eSecDebug("eDVBSatelliteEquipmentControl::setLoDirection(%d)", direction);
1229 if ( currentLNBValid() )
1230 m_lnbs[m_lnbidx].m_rotor_parameters.m_gotoxx_parameters.m_lo_direction=direction;
1236 RESULT eDVBSatelliteEquipmentControl::setLaDirection(int direction)
1238 eSecDebug("eDVBSatelliteEquipmentControl::setLaDirection(%d)", direction);
1239 if ( currentLNBValid() )
1240 m_lnbs[m_lnbidx].m_rotor_parameters.m_gotoxx_parameters.m_la_direction=direction;
1246 RESULT eDVBSatelliteEquipmentControl::setUseInputpower(bool onoff)
1248 eSecDebug("eDVBSatelliteEquipmentControl::setUseInputpower(%d)", onoff);
1249 if ( currentLNBValid() )
1250 m_lnbs[m_lnbidx].m_rotor_parameters.m_inputpower_parameters.m_use=onoff;
1256 RESULT eDVBSatelliteEquipmentControl::setInputpowerDelta(int delta)
1258 eSecDebug("eDVBSatelliteEquipmentControl::setInputpowerDelta(%d)", delta);
1259 if ( currentLNBValid() )
1260 m_lnbs[m_lnbidx].m_rotor_parameters.m_inputpower_parameters.m_delta=delta;
1266 /* Unicable Specific Parameters */
1267 RESULT eDVBSatelliteEquipmentControl::setLNBSatCR(int SatCR_idx)
1269 eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCR(%d)", SatCR_idx);
1270 if(!((SatCR_idx >=-1) && (SatCR_idx < MAX_SATCR)))
1272 if ( currentLNBValid() )
1273 m_lnbs[m_lnbidx].SatCR_idx = SatCR_idx;
1279 RESULT eDVBSatelliteEquipmentControl::setLNBSatCRvco(int SatCRvco)
1281 eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCRvco(%d)", SatCRvco);
1282 if(!((SatCRvco >= 950*1000) && (SatCRvco <= 2150*1000)))
1284 if(!((m_lnbs[m_lnbidx].SatCR_idx >= 0) && (m_lnbs[m_lnbidx].SatCR_idx < MAX_SATCR)))
1286 if ( currentLNBValid() )
1287 m_lnbs[m_lnbidx].SatCRvco = SatCRvco;
1293 RESULT eDVBSatelliteEquipmentControl::setLNBSatCRpositions(int SatCR_positions)
1295 eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCRpositions(%d)", SatCR_positions);
1296 if(SatCR_positions < 1 || SatCR_positions > 2)
1298 if ( currentLNBValid() )
1299 m_lnbs[m_lnbidx].SatCR_positions = SatCR_positions;
1305 RESULT eDVBSatelliteEquipmentControl::getLNBSatCRpositions()
1307 if ( currentLNBValid() )
1308 return m_lnbs[m_lnbidx].SatCR_positions;
1312 RESULT eDVBSatelliteEquipmentControl::getLNBSatCR()
1314 if ( currentLNBValid() )
1315 return m_lnbs[m_lnbidx].SatCR_idx;
1319 RESULT eDVBSatelliteEquipmentControl::getLNBSatCRvco()
1321 if ( currentLNBValid() )
1322 return m_lnbs[m_lnbidx].SatCRvco;
1326 /* Satellite Specific Parameters */
1327 RESULT eDVBSatelliteEquipmentControl::addSatellite(int orbital_position)
1329 eSecDebug("eDVBSatelliteEquipmentControl::addSatellite(%d)", orbital_position);
1330 if ( currentLNBValid() )
1332 std::map<int, eDVBSatelliteSwitchParameters>::iterator it =
1333 m_lnbs[m_lnbidx].m_satellites.find(orbital_position);
1334 if ( it == m_lnbs[m_lnbidx].m_satellites.end() )
1336 std::pair<std::map<int, eDVBSatelliteSwitchParameters>::iterator, bool > ret =
1337 m_lnbs[m_lnbidx].m_satellites.insert(
1338 std::pair<int, eDVBSatelliteSwitchParameters>(orbital_position, eDVBSatelliteSwitchParameters())
1341 m_curSat = ret.first;
1353 RESULT eDVBSatelliteEquipmentControl::setVoltageMode(int mode)
1355 eSecDebug("eDVBSatelliteEquipmentControl::setVoltageMode(%d)", mode);
1356 if ( currentLNBValid() && m_curSat != m_lnbs[m_lnbidx].m_satellites.end() )
1357 m_curSat->second.m_voltage_mode = (eDVBSatelliteSwitchParameters::t_voltage_mode)mode;
1364 RESULT eDVBSatelliteEquipmentControl::setToneMode(int mode)
1366 eSecDebug("eDVBSatelliteEquipmentControl::setToneMode(%d)", mode);
1367 if ( currentLNBValid() )
1369 if ( m_curSat != m_lnbs[m_lnbidx].m_satellites.end() )
1370 m_curSat->second.m_22khz_signal = (eDVBSatelliteSwitchParameters::t_22khz_signal)mode;
1379 RESULT eDVBSatelliteEquipmentControl::setRotorPosNum(int rotor_pos_num)
1381 eSecDebug("eDVBSatelliteEquipmentControl::setRotorPosNum(%d)", rotor_pos_num);
1382 if ( currentLNBValid() )
1384 if ( m_curSat != m_lnbs[m_lnbidx].m_satellites.end() )
1385 m_curSat->second.m_rotorPosNum=rotor_pos_num;
1394 RESULT eDVBSatelliteEquipmentControl::setRotorTurningSpeed(int speed)
1396 eSecDebug("eDVBSatelliteEquipmentControl::setRotorTurningSpeed(%d)", speed);
1397 if ( currentLNBValid() )
1398 m_lnbs[m_lnbidx].m_rotor_parameters.m_inputpower_parameters.m_turning_speed = speed;
1406 int orb_pos, lofl, lofh;
1407 sat_compare(int o, int lofl, int lofh)
1408 :orb_pos(o), lofl(lofl), lofh(lofh)
1410 sat_compare(const sat_compare &x)
1411 :orb_pos(x.orb_pos), lofl(x.lofl), lofh(x.lofh)
1413 bool operator < (const sat_compare & cmp) const
1415 if (orb_pos == cmp.orb_pos)
1417 if ( abs(lofl-cmp.lofl) < 200000 )
1419 if (abs(lofh-cmp.lofh) < 200000)
1421 return lofh<cmp.lofh;
1423 return lofl<cmp.lofl;
1425 return orb_pos < cmp.orb_pos;
1429 RESULT eDVBSatelliteEquipmentControl::setTunerLinked(int tu1, int tu2)
1431 eSecDebug("eDVBSatelliteEquipmentControl::setTunerLinked(%d, %d)", tu1, tu2);
1434 eDVBRegisteredFrontend *p1=NULL, *p2=NULL;
1435 eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin());
1436 for (; it != m_avail_frontends.end(); ++it)
1438 if (it->m_frontend->getSlotID() == tu1)
1440 else if (it->m_frontend->getSlotID() == tu2)
1446 p1->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, (long)p2);
1447 p2->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, (long)p1);
1448 if (!strcmp(p1->m_frontend->getDescription(), p2->m_frontend->getDescription()) && sscanf(p1->m_frontend->getDescription(), "BCM450%c (internal)", &c) == 1)
1450 FILE *f=fopen("/proc/stb/tsmux/lnb_b_input", "w");
1451 if (!f || fwrite("A", 1, 1, f) != 1)
1452 eDebug("set /proc/stb/tsmux/lnb_b_input to A failed!! (%m)");
1455 eDebug("set /proc/stb/tsmux/lnb_b_input to A OK");
1462 it=m_avail_simulate_frontends.begin();
1463 for (; it != m_avail_simulate_frontends.end(); ++it)
1465 if (it->m_frontend->getSlotID() == tu1)
1467 else if (it->m_frontend->getSlotID() == tu2)
1472 p1->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, (long)p2);
1473 p2->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, (long)p1);
1480 RESULT eDVBSatelliteEquipmentControl::setTunerDepends(int tu1, int tu2)
1482 eSecDebug("eDVBSatelliteEquipmentControl::setTunerDepends(%d, %d)", tu1, tu2);
1486 eDVBRegisteredFrontend *p1=NULL, *p2=NULL;
1488 for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it)
1490 if (it->m_frontend->getSlotID() == tu1)
1492 else if (it->m_frontend->getSlotID() == tu2)
1497 p1->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (long)p2);
1498 p2->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (long)p1);
1502 for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_simulate_frontends.begin()); it != m_avail_simulate_frontends.end(); ++it)
1504 if (it->m_frontend->getSlotID() == tu1)
1506 else if (it->m_frontend->getSlotID() == tu2)
1511 p1->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (long)p2);
1512 p2->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, (long)p1);
1519 void eDVBSatelliteEquipmentControl::setSlotNotLinked(int slot_no)
1521 eSecDebug("eDVBSatelliteEquipmentControl::setSlotNotLinked(%d)", slot_no);
1522 m_not_linked_slot_mask |= (1 << slot_no);
1525 bool eDVBSatelliteEquipmentControl::isRotorMoving()
1527 return m_rotorMoving;
1530 void eDVBSatelliteEquipmentControl::setRotorMoving(int slot_no, bool b)
1533 m_rotorMoving |= (1 << slot_no);
1535 m_rotorMoving &= ~(1 << slot_no);