path: root/packages/linux/linux-davinci-2.6.28/davinci-sffsdr/0011-Add-lyrvpss-example-driver-for-the-SFFSDR-board.patch

From 25a91bba1bcc8d9f120e8b85b0ec53a18ccec244 Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hugo@hugovil.com>
Date: Thu, 5 Mar 2009 16:04:23 -0500
Subject: [PATCH 11/12] Add lyrvpss example driver for the SFFSDR board

Currently there is only a VPFE driver in lyrvpss, and it is called luyrvpfe.
It works with a FPGA bitstream that generates a ramp and sends it over the
VPFE interface. The lyrvpfe driver receives an interrupt each time the HSYNC
line is pulsed (even if the VDINT0 interrupt line is used), and stores and
checks the data to make sure that it is valid. The driver will request a new
frame from the FPGA each time there is a read from /proc/lyrvpfe. For example,
to receive a new frame, issue the following:

  $> cat /proc/lyrvpfe

This will send a request to the FPGA (using the GPIO line) to send a new frame,
wait one second then display the contents of the PING and PONG reception buffers.

Signed-off-by: Hugo Villeneuve <hugo@hugovil.com>
---
 .../arm/mach-davinci/include/mach/sffsdr-lyrvpfe.h |   32 +
 drivers/char/Kconfig                               |    2 +
 drivers/char/Makefile                              |    2 +
 drivers/char/lyrvpss/Kconfig                       |   42 ++
 drivers/char/lyrvpss/Makefile                      |    8 +
 drivers/char/lyrvpss/vpfe.c                        |  753 ++++++++++++++++++++
 6 files changed, 839 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-davinci/include/mach/sffsdr-lyrvpfe.h
 create mode 100644 drivers/char/lyrvpss/Kconfig
 create mode 100644 drivers/char/lyrvpss/Makefile
 create mode 100644 drivers/char/lyrvpss/vpfe.c

diff --git a/arch/arm/mach-davinci/include/mach/sffsdr-lyrvpfe.h b/arch/arm/mach-davinci/include/mach/sffsdr-lyrvpfe.h
new file mode 100644
index 0000000..fb47851
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/sffsdr-lyrvpfe.h
@@ -0,0 +1,32 @@
+/*
+ * lyrvpfe.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LYRVPFE_H
+#define __LYRVPFE_H
+
+struct lyrvpfe_platform_data {
+	unsigned ready_gpio;
+};
+
+#endif /* __LYRVPFE_H */
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 43d6ba8..b98a8e2 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1073,5 +1073,7 @@ config DEVPORT
 
 source "drivers/s390/char/Kconfig"
 
+source "drivers/char/lyrvpss/Kconfig"
+
 endmenu
 
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 438f713..8800b3f 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -109,6 +109,8 @@ obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
 obj-$(CONFIG_JS_RTC)		+= js-rtc.o
 js-rtc-y = rtc.o
 
+obj-$(CONFIG_LYRTECH_VPSS)	+= lyrvpss/
+
 # Files generated that shall be removed upon make clean
 clean-files := consolemap_deftbl.c defkeymap.c
 
diff --git a/drivers/char/lyrvpss/Kconfig b/drivers/char/lyrvpss/Kconfig
new file mode 100644
index 0000000..80b1487
--- /dev/null
+++ b/drivers/char/lyrvpss/Kconfig
@@ -0,0 +1,42 @@
+#
+# Lyrtech VPSS drivers
+#
+
+menuconfig LYRTECH_VPSS
+	bool 'Lyrtech SFFSDR VPSS drivers'
+	depends on ARCH_DAVINCI && MACH_SFFSDR
+	help
+	  This enables support for Lyrtech SFFSDR VPSS drivers.
+
+	  If unsure, say N.
+
+if LYRTECH_VPSS
+
+config LYRTECH_VPFE
+	tristate "Lyrtech VPFE Driver Support"
+	help
+	  This option enables support for the Lyrtech VPFE driver
+	  for FPGA to DaVinci data transfers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lyrvpfe.
+
+	  If unsure, say N.
+
+config LYRTECH_VPBE
+	tristate "Lyrtech VPBE Driver Support"
+	help
+	  This option enables support for the Lyrtech VPBE driver
+	  for DaVinci to FPGA data transfers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lyrvpbe.
+
+	  If unsure, say N.
+
+config LYRVPSS_DEBUG
+	boolean "Debug support for LYRVPSSS drivers"
+	help
+	  Say "yes" to enable verbose debug messaging.
+
+endif # LYRTECH_VPSS
diff --git a/drivers/char/lyrvpss/Makefile b/drivers/char/lyrvpss/Makefile
new file mode 100644
index 0000000..ac36807
--- /dev/null
+++ b/drivers/char/lyrvpss/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Lyrtech SFFSDR VPSS driver
+#
+
+obj-$(CONFIG_LYRTECH_VPFE) += lyrvpfe.o
+obj-$(CONFIG_LYRTECH_VPBE) += lyrvpbe.o
+lyrvpfe-objs := vpfe.o
+lyrvpbe-objs := vpbe.o
diff --git a/drivers/char/lyrvpss/vpfe.c b/drivers/char/lyrvpss/vpfe.c
new file mode 100644
index 0000000..45e2853
--- /dev/null
+++ b/drivers/char/lyrvpss/vpfe.c
@@ -0,0 +1,753 @@
+/*
+ * lyrvpfe driver
+ *
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <asm/uaccess.h>
+#endif /* CONFIG_PROC_FS */
+
+#include <asm/gpio.h>
+
+#include <mach/sffsdr-fpga.h>
+#include <mach/sffsdr-lyrvpfe.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+
+#define MODULE_NAME "lyrvpfe"
+
+#ifdef CONFIG_LYRVPSS_DEBUG
+#define DBGMSG(fmt, args...)				\
+	printk(KERN_INFO "%s: "fmt"\n" , MODULE_NAME, ## args)
+#else
+#define DBGMSG(fmt, args...)
+#endif
+
+#define FAILMSG(fmt, args...)					\
+	printk(KERN_ERR "%s: "fmt"\n" , MODULE_NAME, ## args)
+
+#define DAVINCI_CCDC_REGS_OFFSET	0x400
+
+/* This word is written at index 0 to mark a buffer as invalid. */
+#define INVALIDATE_BUFFER_CODE	0x11222211
+
+/* Default values for our driver. */
+#define LYRVPFE_LINES_PER_FRAME	2
+#define LYRVPFE_WORDS_PER_LINE	8 /* Minimum is 8 words */
+
+/* SFFSDR VPSS limits */
+#define LYRVPFE_MAX_WORDS_PER_LINE	1024
+#define LYRVPFE_MAX_LINES_PER_FRAME	10
+#define LYRVPFE_MAX_BUFFER_SIZE		65536
+
+#define BUFFER_PING	0
+#define BUFFER_PONG	1
+
+struct ccdc_regs {
+	u32 pid;
+	u32 pcr;
+	u32 syn_mode;
+	u32 hd_vd_wid;
+	u32 pix_lines;
+	u32 horz_info;
+	u32 vert_start;
+	u32 vert_lines;
+	u32 culling;
+	u32 hsize_off;
+	u32 sdofst;
+	u32 sdr_addr;
+	u32 clamp;
+	u32 dcsub;
+	u32 colptn;
+	u32 blkcmp;
+	u32 fpc;
+	u32 fpc_addr;
+	u32 vdint;
+	u32 alaw;
+	u32 rec656if;
+	u32 ccdcfg;
+	u32 fmtcfg;
+	u32 fmt_horz;
+	u32 fmt_vert;
+	u32 unused[48];
+	u32 vp_out;
+};
+
+#define CCDC_REGS_COUNT 38
+
+#define CCDC_WEN_BIT	(1 << 17)
+#define CCDC_VDHDEN_BIT	(1 << 16)
+#define CCDC_VDPOL_NEG	(1 <<  2)
+
+/* Structure containing driver informations. */
+struct lyrvpfe_private {
+	enum {
+		LYRVPFE_INIT_START,
+		LYRVPFE_INIT_HAVE_REGS,
+		LYRVPFE_INIT_HAVE_IRQ,
+		LYRVPFE_INIT_HAVE_GPIO,
+		LYRVPFE_INIT_VPFE,
+		LYRVPFE_INIT_HAVE_PING_BUFFER,
+		LYRVPFE_INIT_HAVE_PONG_BUFFER,
+		LYRVPFE_INIT_HAVE_PROC
+	} init_state;
+	u32 id;
+	unsigned ready_gpio;
+	unsigned int irq;
+	void *regs;
+	volatile struct ccdc_regs *ccdc_regs;
+	u32 ramp_index;
+	u32 lines_per_frame;
+	u32 words_per_line;
+	int line_size;
+	int bufsize;
+	int wrid; /* 0 (ping) or 1 (pong) */
+	u32 *data_buffers[2];
+	struct device dev;
+};
+
+static struct lyrvpfe_private lyrvpfe;
+
+/* Informs the FPGA that the DaVinci can receive a new frame. */
+static void lyrvpfe_set_ready(void)
+{
+	int value;
+
+	/* Read current pin state */
+	value = gpio_get_value(lyrvpfe.ready_gpio);
+
+	/* Toggle state. */
+	value ^= 1;
+
+	/* Toggle pin. */
+	gpio_set_value(lyrvpfe.ready_gpio, value);
+}
+
+#ifdef CONFIG_PROC_FS
+
+#define LYRVPFE_PROC_NAME	"lyrvpfe"
+
+static void *lyrvpfe_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < 1 ? (void *)1 : NULL;
+}
+
+static void *lyrvpfe_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return NULL;
+}
+
+static void lyrvpfe_stop(struct seq_file *m, void *v)
+{
+}
+
+static void lyrvpfe_display_regs(char *msg, u32 *regs, int size,
+				 struct seq_file *m)
+{
+	int k;
+
+	seq_printf(m, "%s:", msg);
+	for (k = 0; k < size; k++) {
+		if ((k % 4) == 0)
+			seq_printf(m, "\n");
+
+		seq_printf(m, "  [$%02X] $%08X", k * 4, regs[k]);
+	}
+	seq_printf(m, "\n");
+}
+
+static int lyrvpfe_show(struct seq_file *m, void *v)
+{
+	u32 *regs;
+	unsigned long jtarget, jcurrent;
+
+	/* Toggle pin to receive next frame */
+	lyrvpfe_set_ready();
+
+	jtarget = jiffies + (1 * HZ);
+
+	/* Wait 1 second for data to arrive. */
+	do {
+		jcurrent = jiffies;
+		cpu_relax();
+	} while (time_before(jcurrent, jtarget));
+
+	regs = (u32 *) lyrvpfe.ccdc_regs;
+	lyrvpfe_display_regs("CCDC registers", regs, CCDC_REGS_COUNT, m);
+
+	seq_printf(m, "FPGA registers:\n");
+
+	seq_printf(m, "  [$%04X] $%04X  [$%04X] $%04X" \
+		   "  [$%04X] $%04X  [$%04X] $%04X\n",
+		   SFFSDR_FPGA_REVISION,
+		   sffsdr_fpga_regread(SFFSDR_FPGA_REVISION),
+		   SFFSDR_FPGA_VPSS_CONTROL,
+		   sffsdr_fpga_regread(SFFSDR_FPGA_VPSS_CONTROL),
+		   SFFSDR_FPGA_VPSS_TO_DSP_FIFO,
+		   sffsdr_fpga_regread(SFFSDR_FPGA_VPSS_TO_DSP_FIFO),
+		   SFFSDR_FPGA_VPSS_LINES_PER_FRAME,
+		   sffsdr_fpga_regread(SFFSDR_FPGA_VPSS_LINES_PER_FRAME));
+
+	regs = lyrvpfe.data_buffers[BUFFER_PING];
+	lyrvpfe_display_regs("PING buffer", regs, 64, m);
+
+	regs = lyrvpfe.data_buffers[BUFFER_PONG];
+	lyrvpfe_display_regs("PONG buffer", regs, 64, m);
+
+	return 0;
+}
+
+static const struct seq_operations lyrvpfe_op = {
+	.start	= lyrvpfe_start,
+	.next	= lyrvpfe_next,
+	.stop	= lyrvpfe_stop,
+	.show	= lyrvpfe_show
+};
+
+static int lyrvpfe_open(struct inode *inode, struct file *file)
+{
+	struct seq_file *m;
+	int ret;
+
+	DBGMSG("lyrvpfe_open");
+
+	ret = seq_open(file, &lyrvpfe_op);
+	if (ret < 0)
+		return ret;
+
+	m = file->private_data;
+
+	return 0;
+}
+
+static const struct file_operations proc_lyrvpfe_operations = {
+	.open		= lyrvpfe_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+	.owner		= THIS_MODULE,
+};
+
+static int lyrvpfe_proc_init(void)
+{
+	struct proc_dir_entry *entry;
+
+	entry = create_proc_entry(LYRVPFE_PROC_NAME, 0, NULL);
+	if (!entry) {
+		FAILMSG("Error creating proc entry");
+		return -EFAULT;
+	}
+
+	entry->proc_fops = &proc_lyrvpfe_operations;
+	entry->data = &lyrvpfe;
+
+	return 0;
+}
+
+#endif /* CONFIG_PROC_FS */
+
+static int lyrvpfe_validate_buffer(u32 *buffer)
+{
+	u8 xor, xnor;
+	u8 *cksum_data = (u8 *) buffer;
+
+	/* Compute XOR of bytes 4 and 5 */
+	xnor = ~(cksum_data[4] ^ cksum_data[5]);
+	xor = cksum_data[4] ^ cksum_data[5];
+
+	if ((xor != cksum_data[1]) || (xnor != cksum_data[0]))
+		return -1;
+	else
+		return 0;
+}
+
+static inline void lyrvpfe_invalidate_buffer(u32 *buffer)
+{
+	int line;
+	int offset;
+
+	for (line = 0; line < lyrvpfe.lines_per_frame; line++) {
+		/* Get offset of next line. */
+		offset = (line * lyrvpfe.ccdc_regs->hsize_off) / 4;
+
+		/* Mark buffer as invalid. */
+		buffer[offset] = INVALIDATE_BUFFER_CODE;
+	}
+}
+
+/*
+ * Lyrtech SFFSDR custom VPFE format:
+ *
+ * Length is in u32 units
+ *
+ * Format for each line:
+ *
+ * | u32  |                bits               |
+ * |offset| 31..24 | 23..16 | 15..08 | 07..00 |
+ * ============================================
+ *   0    | dummy    dummy    dummy    dummy
+ *   1    | dummy    dummy    dummy    dummy
+ *   2    | length   length   cksum    cksum
+ *   3    | data0    data0    data0    data0
+ *   4    | data1    data1    data1    data1
+ *  ...      ...
+ */
+static int vpfe_check_buffer(u32 *buffer)
+{
+	int k;
+	int line;
+	u16 length;
+	int offset;
+	int ret;
+
+	for (line = 0; line < lyrvpfe.lines_per_frame; line++) {
+		/* Get offset of next line. */
+		offset = (line * lyrvpfe.ccdc_regs->hsize_off) / 4;
+
+		if (buffer[offset] == INVALIDATE_BUFFER_CODE) {
+			/* No error. Means that HD pulses generated the VDINT0
+			 * interruption, but VD was not asserted. */
+			return -1;
+		}
+
+		/* First two words contain empty/dummy data. */
+		offset += 2;
+
+		if (line == 0) {
+			if (lyrvpfe.wrid == BUFFER_PING)
+				DBGMSG("VDINT: PING buffer");
+			else
+				DBGMSG("VDINT: PONG buffer");
+		}
+
+		ret = lyrvpfe_validate_buffer(&buffer[offset]);
+		if (ret < 0) {
+			/* This may mean a checksum error, or that
+			 * the FPGA sent fewer lines than the maximum
+			 * configured. */
+			FAILMSG("  Checksum error line %d", line);
+			return -1;
+		}
+
+		length = buffer[offset] >> 16;
+
+		/* Points to first data word. */
+		offset++;
+
+		for (k = 0; k < length; k++) {
+			if (buffer[offset + k] != (lyrvpfe.ramp_index + k)) {
+				FAILMSG("    Ramp error at index %d, line %d",
+					lyrvpfe.ramp_index, line);
+				FAILMSG("    read:     $%08X",
+					buffer[offset + k]);
+				FAILMSG("    expected: $%08X",
+					lyrvpfe.ramp_index + k);
+
+				lyrvpfe_invalidate_buffer(buffer);
+				return -1;
+			}
+		}
+
+		lyrvpfe.ramp_index += length;
+	}
+
+	return 0;
+}
+
+static void lyrvpfe_set_ccdc_buffer(u32 *virt_address)
+{
+	lyrvpfe.ccdc_regs->sdr_addr = (u32) virt_to_phys(virt_address);
+}
+
+/*
+ * The CCDC VDINT0 and VDINT1 HD counters begin counting HD pulses from the
+ * rising edge of the external VD. The Lyrtech FPGA VPFE design only drives VD
+ * when the ARM request data by toggling the SET_VPFE_READY GPIO. Unfortunately,
+ * the FPGA never disable the HD line, and the ISR will be called all the time
+ * with invalid data when VD is not driven. This is why we need to invalidate a
+ * buffer once it has been read.
+ */
+static irqreturn_t lyrvpfe_isr(int irq, void *dev_id)
+{
+	int ret;
+	int buffer_read_id;
+
+	/* Buffer index for reading data */
+	buffer_read_id = lyrvpfe.wrid;
+
+	ret = vpfe_check_buffer(lyrvpfe.data_buffers[buffer_read_id]);
+	if (ret) {
+		/* This could mean a real error or simply that we received a
+		 * dummy HD interrupt. */
+		lyrvpfe_invalidate_buffer(lyrvpfe.data_buffers[buffer_read_id]);
+	} else {
+		/* Valid data was received. We can now switch the pong-pong
+		 * buffers. */
+
+		/* Switch ping-pong buffers for writing. */
+		lyrvpfe.wrid ^= 1;
+		lyrvpfe_set_ccdc_buffer(lyrvpfe.data_buffers[lyrvpfe.wrid]);
+
+		/* Make sure to invalidate the new buffer */
+		lyrvpfe_invalidate_buffer(lyrvpfe.data_buffers[lyrvpfe.wrid]);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Configures the VPFE interface to receive data from the FPGA.
+ *
+ * lines_per_frame:  Lines per frame (within the VSYNC period).
+ * words_per_line:   32-bits data words per line (within the HSYNC period).
+ */
+static int lyrvpfe_init_vpfe(u16 lines_per_frame, u16 words_per_line)
+{
+	int bytes_per_buffer;
+
+	lyrvpfe.ramp_index = 0;
+	lyrvpfe.wrid = BUFFER_PING;
+
+	if (words_per_line > LYRVPFE_MAX_WORDS_PER_LINE) {
+		FAILMSG("VPFE init: invalid words_per_line (%d)",
+			words_per_line);
+		return -1;
+	}
+
+	if (lines_per_frame > LYRVPFE_MAX_LINES_PER_FRAME) {
+		FAILMSG("VPFE init: invalid lines_per_frame (%d)",
+			lines_per_frame);
+		return -1;
+	}
+
+	bytes_per_buffer = (words_per_line + 3) * 4 * lines_per_frame;
+	if (bytes_per_buffer > LYRVPFE_MAX_BUFFER_SIZE) {
+		FAILMSG("VPFE init: wrong bytes_per_buffer (%d)",
+			bytes_per_buffer);
+		return -1;
+	}
+
+	DBGMSG("  words_per_line  = $%04X", words_per_line);
+	DBGMSG("  lines_per_frame = $%04X", lines_per_frame);
+
+	/* Setup FPGA parameters */
+	sffsdr_fpga_regwrite(SFFSDR_FPGA_VPSS_TO_DSP_FIFO,
+			     (words_per_line & 0x3ff) |
+			     (lines_per_frame << 10));
+
+	/* 2 additional for blanking and 1 for header (length and checksum). */
+	words_per_line = words_per_line + 3;
+
+	lyrvpfe.words_per_line = words_per_line;
+	lyrvpfe.lines_per_frame = lines_per_frame;
+
+	/************************************************/
+	/* Setup Fix VPFE parameter                     */
+	/************************************************/
+	/* Setup VPFE Hardware */
+	lyrvpfe.ccdc_regs->syn_mode = CCDC_WEN_BIT | CCDC_VDHDEN_BIT |
+		CCDC_VDPOL_NEG;
+
+	/* Start at Line 0 */
+	lyrvpfe.ccdc_regs->vert_start = 0;
+
+	/* Disable culling */
+	lyrvpfe.ccdc_regs->culling = 0xFFFF00FF;
+
+	lyrvpfe.ccdc_regs->sdofst   = 0;
+	lyrvpfe.ccdc_regs->clamp    = 0;
+	lyrvpfe.ccdc_regs->dcsub    = 0;
+	lyrvpfe.ccdc_regs->colptn   = 0;
+	lyrvpfe.ccdc_regs->blkcmp   = 0;
+	lyrvpfe.ccdc_regs->fpc      = 0;
+	lyrvpfe.ccdc_regs->vdint    = 0;
+	lyrvpfe.ccdc_regs->alaw     = 0;
+	lyrvpfe.ccdc_regs->rec656if = 0;
+
+	/* Disable shadowing as recommended in silicon errata. Very important,
+	 * if not set, a lot of problems may occur. */
+	/* VDLC: Not latched on VSYNC. */
+	lyrvpfe.ccdc_regs->ccdcfg = (1 << 15);
+
+	/************************************************/
+	/* Setup variable VPFE parameter                */
+	/************************************************/
+	/* Max. length of a line */
+	lyrvpfe.ccdc_regs->horz_info = words_per_line * 4;
+
+	/* Max. number of lines per frame - 1 */
+	lyrvpfe.ccdc_regs->vert_lines = lines_per_frame - 1;
+
+	/* Offset of a line in memory (in bytes).
+	 * Must be on 32 bytes boundary */
+	lyrvpfe.line_size = ((words_per_line * sizeof(u32)) + 31) & ~31;
+	lyrvpfe.ccdc_regs->hsize_off = lyrvpfe.line_size;
+
+	/* Enable CCDC */
+	lyrvpfe.ccdc_regs->pcr = 0x1;
+
+	return 0;
+}
+
+static void lyrvpfe_disable_vpfe(void)
+{
+	/* Disable CCDC */
+	lyrvpfe.ccdc_regs->pcr = 0;
+}
+
+static void lyrvpfe_dev_cleanup(void)
+{
+	DBGMSG("lyrvpfe_dev_cleanup()");
+
+	switch (lyrvpfe.init_state) {
+	case LYRVPFE_INIT_HAVE_PROC:
+#ifdef CONFIG_PROC_FS
+		remove_proc_entry(LYRVPFE_PROC_NAME, NULL);
+#endif
+	case LYRVPFE_INIT_HAVE_IRQ:
+		free_irq(lyrvpfe.irq, &lyrvpfe);
+	case LYRVPFE_INIT_HAVE_PONG_BUFFER:
+		kfree(lyrvpfe.data_buffers[BUFFER_PONG]);
+	case LYRVPFE_INIT_HAVE_PING_BUFFER:
+		kfree(lyrvpfe.data_buffers[BUFFER_PING]);
+	case LYRVPFE_INIT_VPFE:
+		lyrvpfe_disable_vpfe();
+	case LYRVPFE_INIT_HAVE_GPIO:
+		gpio_free(lyrvpfe.ready_gpio);
+	case LYRVPFE_INIT_HAVE_REGS:
+		iounmap(lyrvpfe.regs);
+	case LYRVPFE_INIT_START:
+		break;
+	}
+}
+
+struct bus_type lyrvpfe_bus_type = {
+	.name = "lyrvpfe",
+};
+EXPORT_SYMBOL(lyrvpfe_bus_type);
+
+static int lyrvpfe_probe(struct platform_device *pdev)
+{
+	struct lyrvpfe_platform_data *pdata;
+	struct resource *regs_res;
+	struct resource *irq_res;
+	int result;
+	void *buf;
+
+	DBGMSG("lyrvpfe_probe()");
+
+	/* We Should enable the VPFE with the PSC controller and PINMUX0. */
+
+	lyrvpfe.id = pdev->id;
+	lyrvpfe.dev.bus = &lyrvpfe_bus_type;
+	lyrvpfe.dev.parent = &pdev->dev;
+	snprintf(lyrvpfe.dev.bus_id, BUS_ID_SIZE, "lyrvpfe%d", lyrvpfe.id);
+	lyrvpfe.dev.bus_id[BUS_ID_SIZE - 1] = 0;
+	lyrvpfe.init_state = LYRVPFE_INIT_START;
+
+	regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	if (!regs_res) {
+		FAILMSG("Error getting REGS ressource");
+		result = -ENODEV;
+		goto error;
+	}
+
+	lyrvpfe.regs = ioremap(regs_res->start,
+			       regs_res->end - regs_res->start);
+	if (!lyrvpfe.regs) {
+		FAILMSG("Can't remap CCDC registers");
+		result = -ENXIO;
+		goto error;
+	}
+	lyrvpfe.ccdc_regs = (struct ccdc_regs *)
+		(lyrvpfe.regs + DAVINCI_CCDC_REGS_OFFSET);
+
+	lyrvpfe.init_state = LYRVPFE_INIT_HAVE_REGS;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		FAILMSG("Error getting platform data");
+		result = -ENODEV;
+		goto error;
+	}
+	lyrvpfe.dev.platform_data = pdata;
+
+	/* Configure VPFE SET READY GPIO. */
+	lyrvpfe.ready_gpio = pdata->ready_gpio;
+
+	result = gpio_request(lyrvpfe.ready_gpio, "vpfe_ready");
+	if (result == 0) {
+		/* Must start at 1, if not gives errors. */
+		result = gpio_direction_output(lyrvpfe.ready_gpio, 1);
+	}
+	if (result != 0)
+		goto error;
+
+	lyrvpfe.init_state = LYRVPFE_INIT_HAVE_GPIO;
+
+	result = lyrvpfe_init_vpfe(LYRVPFE_LINES_PER_FRAME,
+				   LYRVPFE_WORDS_PER_LINE);
+	if (result < 0) {
+		FAILMSG("lyrvpfe_init_vpfe() failed (%d)", result);
+		goto error;
+	}
+	lyrvpfe.init_state = LYRVPFE_INIT_VPFE;
+
+	/* Adding 256 to compensate for 256 bytes alignment */
+	lyrvpfe.bufsize = lyrvpfe.line_size * lyrvpfe.lines_per_frame + 256;
+
+	buf = kmalloc(lyrvpfe.bufsize /*LYRVPFE_BUFFER_SIZE*/, GFP_KERNEL);
+	if (!buf) {
+		result = -ENOMEM;
+		goto error;
+	}
+	/* Buffer must be 32 bytes aligned for the hardware but must be
+	 * 256 bytes aligned to cope with cache line size. */
+	lyrvpfe.data_buffers[BUFFER_PING] =
+		(u32 *) (((u32) buf + 255) & 0xFFFFFF00);
+	lyrvpfe.data_buffers[BUFFER_PING][0] = 0x11111111;
+	lyrvpfe.data_buffers[BUFFER_PING][1] = 0x22222222;
+	lyrvpfe_invalidate_buffer(lyrvpfe.data_buffers[BUFFER_PING]);
+	lyrvpfe.init_state = LYRVPFE_INIT_HAVE_PING_BUFFER;
+
+	buf = kmalloc(lyrvpfe.bufsize /*LYRVPFE_BUFFER_SIZE*/, GFP_KERNEL);
+	if (!buf) {
+		result = -ENOMEM;
+		goto error;
+	}
+	/* Buffer must be 32 bytes aligned for the hardware but must be
+	 * 256 bytes aligned to cope with cache line size. */
+	lyrvpfe.data_buffers[BUFFER_PONG] =
+		(u32 *) (((u32) buf + 255) & 0xFFFFFF00);
+	lyrvpfe.data_buffers[BUFFER_PONG][0] = 0x33333333;
+	lyrvpfe.data_buffers[BUFFER_PONG][1] = 0x44444444;
+	lyrvpfe_invalidate_buffer(lyrvpfe.data_buffers[BUFFER_PONG]);
+	lyrvpfe.init_state = LYRVPFE_INIT_HAVE_PONG_BUFFER;
+
+	lyrvpfe_set_ccdc_buffer(lyrvpfe.data_buffers[lyrvpfe.wrid]);
+
+	/* setup interrupt handling */
+	irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "irq");
+	if (!irq_res) {
+		FAILMSG("Error getting IRQ ressource");
+		result = -ENODEV;
+		goto error;
+	}
+
+	lyrvpfe.irq = irq_res->start;
+	result = request_irq(lyrvpfe.irq, lyrvpfe_isr,
+			     IRQF_SHARED /*IRQF_DISABLED*/,
+			     MODULE_NAME, &lyrvpfe);
+	if (result) {
+		FAILMSG("Error requesting IRQ ressource");
+		result = -ENODEV; /* To check */
+		goto error;
+	}
+
+	lyrvpfe.init_state = LYRVPFE_INIT_HAVE_IRQ;
+
+#ifdef CONFIG_PROC_FS
+	result = lyrvpfe_proc_init();
+	if (result < 0) {
+		FAILMSG("Error creating proc entry");
+		goto error;
+	}
+#endif
+
+	lyrvpfe.init_state = LYRVPFE_INIT_HAVE_PROC;
+
+	return 0;
+
+error:
+	lyrvpfe_dev_cleanup();
+	return result;
+}
+
+static int __devexit lyrvpfe_remove(struct platform_device *pdev)
+{
+	DBGMSG("lyrvpfe_remove()");
+
+	lyrvpfe_dev_cleanup();
+	return 0;
+}
+
+static struct platform_driver lyrvpfe_pdriver = {
+	.driver         = {
+		.name   = MODULE_NAME,
+		.owner  = THIS_MODULE,
+	},
+	.remove = lyrvpfe_remove,
+};
+
+static int __init lyrvpfe_init(void)
+{
+	int res = 0;
+
+	DBGMSG("lyrvpfe_init()");
+
+	res = bus_register(&lyrvpfe_bus_type);
+	if (res) {
+		FAILMSG("bus_register() failed");
+		goto fail_bus;
+	}
+
+	res = platform_driver_probe(&lyrvpfe_pdriver, lyrvpfe_probe);
+	if (res) {
+		FAILMSG("platform_driver_probe() failed");
+		goto fail_platform;
+	}
+
+	return 0;
+
+fail_platform:
+	bus_unregister(&lyrvpfe_bus_type);
+fail_bus:
+	return res;
+}
+module_init(lyrvpfe_init);
+
+static void __exit lyrvpfe_exit(void)
+{
+	DBGMSG("lyrvpfe_exit()");
+
+	platform_driver_unregister(&lyrvpfe_pdriver);
+	bus_unregister(&lyrvpfe_bus_type);
+}
+module_exit(lyrvpfe_exit);
+
+MODULE_AUTHOR("Hugo Villeneuve <hvilleneuve@lyrtech.com>");
+MODULE_DESCRIPTION("Lyrtech SFFSDR VPFE driver");
+MODULE_LICENSE("GPL");
-- 
1.5.4.5