"6": self.numberaction,
"7": self.numberaction,
"8": self.numberaction,
- "9": self.numberaction,
- "red": self.shutdownaction,
+ "9": self.numberaction,
+ "red": self.shutdownaction,
}, -2)
Screen.__init__(self, session)
- TESTPROGRAM_DATE = "2010-03-22"
+ TESTPROGRAM_DATE = "2010-06-11"
TESTPROGRAM_VERSION = "Version 00.01"
self.model = 0
if self.macConsole is not None:
if retval == 0:
self.macConsole = None
- content =result.split()
- self["mactext"].setText(("MAC : "+content[10]))
+ content =result.splitlines()
+ macline = content[3].split()
+ mac = macline[5]+":"+macline[6]+":"+macline[7]+":"+macline[8]+":"+macline[9]+":"+macline[10]
+ self["mactext"].setText(("MAC : "+mac))
def getmacaddr(self):
try:
- cmd = "ip -o addr"
+ cmd = "nanddump -b -o -l 64 -p /dev/mtd4"
self.macConsole = Console()
self.macConsole.ePopen(cmd, self.readmac)
-# self["stattext"].setText((macaddr))
except:
return
if displayerror==1:
self.session.open( MessageBox, _("one hdd test error"), MessageBox.TYPE_ERROR)
self.rlist[self["testlist"].getCurrent()[1]]="fail"
- self.satatimer.start(1100,True)
+ else:
+ self.satatimer.start(1100,True)
else:
if displayerror==1:
self.session.open( MessageBox, _("Sata & extend hdd test error"), MessageBox.TYPE_ERROR)
self.rlist[self["testlist"].getCurrent()[1]]="fail"
- self.satatimer.start(1100,True)
+ else:
+ self.satatimer.start(1100,True)
def Test1(self):
if self.model== 0:
self.camtimer.start(100,True)
else:
self.session.nav.stopService()
- self.session.open( MessageBox, _("NO_CAM1_NOT_INSERTED"), MessageBox.TYPE_ERROR)
+ self.session.open( MessageBox, _("CAM1_NOT_INSERTED\nPress exit!"), MessageBox.TYPE_ERROR)
self.rlist[self["testlist"].getCurrent()[1]]="fail"
self.tunemsgtimer.stop()
# self.rlist[index]="fail"
print 'appname',appname
if appname is None:
self.session.nav.stopService()
- self.session.open( MessageBox, _("NO_GET_APPNAME"), MessageBox.TYPE_ERROR)
+ self.session.open( MessageBox, _("NO_GET_APPNAME\nPress exit!"), MessageBox.TYPE_ERROR)
self.rlist[self["testlist"].getCurrent()[1]]="fail"
self.tunemsgtimer.stop()
else:
self.camtimer.start(100,True)
else:
self.session.nav.stopService()
- self.session.open( MessageBox, _("NO_CAM2_NOT_INSERTED"), MessageBox.TYPE_ERROR)
+ self.session.open( MessageBox, _("CAM2_NOT_INSERTED\nPress exit!"), MessageBox.TYPE_ERROR)
self.rlist[self["testlist"].getCurrent()[1]]="fail"
self.tunemsgtimer.stop()
# self.rlist[index]="fail"
print 'appname',appname
if appname is None:
self.session.nav.stopService()
- self.session.open( MessageBox, _("NO_GET_APPNAME"), MessageBox.TYPE_ERROR)
+ self.session.open( MessageBox, _("NO_GET_APPNAME\nPress exit!"), MessageBox.TYPE_ERROR)
self.rlist[self["testlist"].getCurrent()[1]]="fail"
self.tunemsgtimer.stop()
else:
def checkaging(self):
global Agingresult
if(Agingresult ==1):
- self["testlist"].moveToIndex(11)
+ self["testlist"].moveToIndex(self.fdefaultIndex)
self.Test14()
- self["testlist"].moveToIndex(12)
+ self["testlist"].moveToIndex(self.shutdownIndex)
self.agingmode = 0
# self["testlist"].instance.moveSelection(self["testlist"].instance.moveDown)
if result < 0 :
result = 0
if result == 3:
- self.session.open( MessageBox, _("USB test pass %d devices"%result), MessageBox.TYPE_INFO)
+ self.session.open( MessageBox, _("USB test pass %d devices\nPress OK!"%result), MessageBox.TYPE_INFO)
self.rlist[self["testlist"].getCurrent()[1]]="pass"
else:
- self.session.open( MessageBox, _("USB test error : Success-%d"%result+" Fail-%d"%(3-result)), MessageBox.TYPE_ERROR)
+ self.session.open( MessageBox, _("USB test error : Success-%d"%result+" Fail-%d\nPress EXIT!"%(3-result)), MessageBox.TYPE_ERROR)
self.rlist[self["testlist"].getCurrent()[1]]="fail"
except:
if result < 0 :
result = 0
if result == 3:
- self.session.open( MessageBox, _("USB test pass %d devices"%result), MessageBox.TYPE_INFO)
+ self.session.open( MessageBox, _("USB test pass %d devices\nPress OK!"%result), MessageBox.TYPE_INFO)
self.rlist[self["testlist"].getCurrent()[1]]="pass"
else:
- self.session.open( MessageBox, _("USB test error : Success-%d"%result+" Fail-%d"%(3-result)), MessageBox.TYPE_ERROR)
+ self.session.open( MessageBox, _("USB test error : Success-%d"%result+" Fail-%d\nPress EXIT!"%(3-result)), MessageBox.TYPE_ERROR)
self.rlist[self["testlist"].getCurrent()[1]]="fail"
elif self.model==1:
try:
if result < 0 :
result = 0
if result == 2:
- self.session.open( MessageBox, _("USB test pass %d devices"%result), MessageBox.TYPE_INFO)
+ self.session.open( MessageBox, _("USB test pass %d devices\nPress OK!"%result), MessageBox.TYPE_INFO)
self.rlist[self["testlist"].getCurrent()[1]]="pass"
else:
- self.session.open( MessageBox, _("USB test error : Success-%d"%result+" Fail-%d"%(2-result)), MessageBox.TYPE_ERROR)
+ self.session.open( MessageBox, _("USB test error : Success-%d"%result+" Fail-%d\nPress EXIT!"%(2-result)), MessageBox.TYPE_ERROR)
self.rlist[self["testlist"].getCurrent()[1]]="fail"
except:
if result < 0 :
result = 0
if result == 2:
- self.session.open( MessageBox, _("USB test pass %d devices"%result), MessageBox.TYPE_INFO)
+ self.session.open( MessageBox, _("USB test pass %d devices\nPress OK!"%result), MessageBox.TYPE_INFO)
self.rlist[self["testlist"].getCurrent()[1]]="pass"
else:
- self.session.open( MessageBox, _("USB test error : Success-%d"%result+" Fail-%d"%(2-result)), MessageBox.TYPE_ERROR)
+ self.session.open( MessageBox, _("USB test error : Success-%d"%result+" Fail-%d\nPress EXIT!"%(2-result)), MessageBox.TYPE_ERROR)
self.rlist[self["testlist"].getCurrent()[1]]="fail"
else:
ethtest = 0
print "fail"
- self.session.open( MessageBox, _("Ping test fail"), MessageBox.TYPE_ERROR)
+ self.session.open( MessageBox, _("Ping test fail\nPress exit"), MessageBox.TYPE_ERROR)
self.macresult()
def Test9(self):
self.loadmacaddr()
self.getmacaddr()
self.pingok=1
-# self.pingtest()
global ethtest
ethtest = 1
break
if disk[1].startswith('/media/sd') or disk[1].startswith('/media/hdd'):
print 'try..',disk[1]
- if fileExists(disk[1]+"/Vuplus_mac.txt"):
- self.macfd = open(disk[1]+"/Vuplus_mac.txt","r+")
+ if fileExists(disk[1]+"/macinfo.txt"):
+ self.macfd = open(disk[1]+"/macinfo.txt","r+")
break
if self.macfd == 0:
self["text"].setText(("cannot read usb!!"))
if self.macConsole is not None:
if retval == 0:
self.macConsole = None
- content =result.split()
- self["stattext"].setText(("now : "+content[10]))
+ content =result.splitlines()
+ macline = content[3].split()
+ mac = macline[5]+":"+macline[6]+":"+macline[7]+":"+macline[8]+":"+macline[9]+":"+macline[10]
+ self["stattext"].setText(("now : "+mac))
def getmacaddr(self):
if self.NetworkState==0:
return
try:
- cmd = "ip -o addr"
+ cmd = "nanddump -b -o -l 64 -p /dev/mtd4"
self.macConsole = Console()
self.macConsole.ePopen(cmd, self.readmac)
-# self["stattext"].setText((macaddr))
except:
return
if self.NetworkState==0 or self.pingok<1:
return
try:
- system("/etc/init.d/networking stop")
- system("ifconfig eth0 down")
macaddr = self.macaddr
- macaddrcmd="ifconfig eth0 hw ether %02x:%02x:%02x:%02x:%02x:%02x"%(int(macaddr[0:2],16),int(macaddr[2:4],16),int(macaddr[4:6],16),int(macaddr[6:8],16),int(macaddr[8:10],16),int(macaddr[10:12],16))
- system(macaddrcmd)
#make_mac_sector 00-99-99-99-00-00 > /tmp/mac.sector
#flash_eraseall /dev/mtd4
#nandwrite /dev/mtd4 /tmp/mac.sector -p
self.macfd.seek(0)
self.macfd.write(macwritetext)
self.macaddr = macaddr
- system("ifconfig eth0 up")
- self.loadmacaddr()
- system("ifconfig eth0 192.168.0.10")
- system("/etc/init.d/networking start")
self.close()
except:
self.session.open( MessageBox, _("Mac address fail"), MessageBox.TYPE_ERROR)
global ethtest
ethtest = 0
- self.close()
-
- def pingtest(self):
- self["stattext"].setText(("now : wait to finish ping test..."))
-# system("/etc/init.d/networking stop")
- system("ifconfig eth0 192.168.0.10")
-# system("/etc/init.d/networking start")
- cmd1 = "ping -c 1 192.168.0.100"
- self.PingConsole = Console()
- self.PingConsole.ePopen(cmd1, self.checkNetworkStateFinished,self.NetworkStatedataAvail)
-
- def checkNetworkStateFinished(self, result, retval,extra_args):
- (statecallback) = extra_args
- if self.PingConsole is not None:
- if retval == 0:
- self.PingConsole = None
- content = result.splitlines()
-# print 'content',content
- x = content[4].split()
-# print 'x',x
- if x[0]==x[3]:
- statecallback(1)
- else:
- statecallback(0)
- else:
- statecallback(0)
-
-
- def NetworkStatedataAvail(self,data):
- global ethtest
- if data == 1:
- ethtest = 1
- print "success"
- self.pingok=1
- self.loadmacaddr()
- self.getmacaddr()
- self.session.open( MessageBox, _("Ping test pass"), MessageBox.TYPE_INFO,2)
- else:
- ethtest = 0
- print "fail"
- self.pingok=0
- self["stattext"].setText(("ping test fail.. press Exit Key"))
- self.session.open( MessageBox, _("Ping test fail"), MessageBox.TYPE_ERROR,2)
- self.getmacaddr()
-
+ self.close()
def keyCancel(self):
if self.pingok == -1:
self.close()
-
sccitest = 0
class ScCiTest(Screen):
self.smartcardtimer = eTimer()
self.smartcardtimer.callback.append(self.check_smart_card)
self.smartcardtimer.start(100,True)
+ self.closetimer = eTimer()
+ self.closetimer.callback.append(self.close)
self.smartcard=0
global smartcardtest
smartcardtest = 0
# self.session.open( MessageBox, _("Smart Card OK!!"), MessageBox.TYPE_INFO,2)
self.step = 1
self["text"].setText(_("Smart Card OK!!"))
+ self.closetimer.start(2000,True)
self.smartcardtimer.stop()
# self.session.openWithCallback(self.check6, MessageBox, _("Scart loop ok?"), MessageBox.TYPE_INFO)
else:
- if result ==-1:
- self.session.open( MessageBox, _("%d:NO_DEV_FOUND"%(index+1)), MessageBox.TYPE_ERROR)
- elif result == -2:
- self.session.open( MessageBox, _("%d:SC_NOT_INSERTED"%(index+1)), MessageBox.TYPE_ERROR)
- elif result == -3:
- self.session.open( MessageBox, _("%d:SC_NOT_VALID_ATR"%(index+1)), MessageBox.TYPE_ERROR)
- elif result == -5:
- self.session.open( MessageBox, _("%d:SC_READ_TIMEOUT"%(index+1)), MessageBox.TYPE_ERROR)
+# if result ==-1:
+# self.session.open( MessageBox, _("%d:NO_DEV_FOUND"%(index+1)), MessageBox.TYPE_ERROR)
+# elif result == -2:
+# self.session.open( MessageBox, _("%d:SC_NOT_INSERTED"%(index+1)), MessageBox.TYPE_ERROR)
+# elif result == -3:
+# self.session.open( MessageBox, _("%d:SC_NOT_VALID_ATR"%(index+1)), MessageBox.TYPE_ERROR)
+# elif result == -5:
+# self.session.open( MessageBox, _("%d:SC_READ_TIMEOUT"%(index+1)), MessageBox.TYPE_ERROR)
if(index==0):
- self["text"].setText(_("Smart Card 1 Error!"))
+ self["text"].setText(_("Smart Card 1 Error!\nerrorcode=%d"%result))
elif (index==1):
- self["text"].setText(_("Smart Card 2 Error!"))
+ self["text"].setText(_("Smart Card 2 Error!\nerrorcode=%d"%result))
+ self.closetimer.start(2000,True)
self.smartcardtimer.stop()
self.keytimeout.stop()
self.step =4
self.fronttimer.start(1000,True)
- self["text"].setText(("Front Test OK! Press Exit Key"))
+ self["text"].setText(("Front Test OK!\nPress Exit Key"))
# elif self.step==4:
# global fronttest
# self.fronttimer.stop()
def KeyTimeOut(self):
if self.step == 1:
- self["text"].setText(("Front STANDBY ERROR"))
+ self["text"].setText(("Front STANDBY ERROR\nPress exit!"))
elif self.step == 2 :
- self["text"].setText(("Front CH+ ERROR"))
+ self["text"].setText(("Front CH - ERROR\nPress exit!"))
elif self.step == 3:
- self["text"].setText(("Front CH- ERROR"))
+ self["text"].setText(("Front CH + ERROR\nPress exit!"))
elif self.step == 4 :
- self["text"].setText(("Front VOL + ERROR"))
+ self["text"].setText(("Front VOL - ERROR\nPress exit!"))
elif self.step == 5:
- self["text"].setText(("Front VOL - ERROR"))
+ self["text"].setText(("Front VOL + ERROR\nPress exit!"))
self.step = 0
# self.keyCancel()
self.keytimeout.stop()
self.keytimeout.start(5000,True)
self.step = 2
- self["text"].setText(_("Press Front CH+"))
+ self["text"].setText(_("Press Front CH -"))
def keyright(self):
if self.step== 3:
self.keytimeout.stop()
self.keytimeout.start(5000,True)
self.step = 4
- self["text"].setText(_("Press Front VOL +"))
+ self["text"].setText(_("Press Front VOL -"))
def keyleft(self):
if self.step== 2:
self.keytimeout.stop()
self.keytimeout.start(5000,True)
self.step = 3
- self["text"].setText(_("Press Front CH -"))
+ self["text"].setText(_("Press Front CH +"))
def keyvolup(self):
- if self.step== 4:
+ if self.step== 5:
self.keytimeout.stop()
- self.keytimeout.start(5000,True)
- self.step = 5
- self["text"].setText(_("Press Front VOL -"))
+ self.step = 6
+ self.fronttimer.start(1000,True)
+ self["text"].setText(_("Front LED OK?\n\nyes-ok\nno-exit"))
+# self["text"].setText(("Front Test OK!\nPress Exit Key"))
def keyvoldown(self):
- if self.step== 5:
+ if self.step== 4:
self.keytimeout.stop()
- self.step = 6
- self["text"].setText(("Front Test OK! Press Exit Key"))
+ self.keytimeout.start(5000,True)
+ self.step = 5
+ self["text"].setText(_("Press Front VOL +"))
+
+ def checkled(self, yesno):
+ if yesno :
+ self.step=6
+ else:
+ self.step=0
+ self.keyCancel()
def keyCancel(self):
global fronttest
self.fronttimer.stop()
eSctest.getInstance().VFD_Close()
- if self.step==6:
- fronttest = 1
- else:
- fronttest = 0
+ fronttest = 0
self.close()
def keyOk(self):
- if self.step == 3:
- self.keytimeout.stop()
- self.step =4
- self.fronttimer.start(1000,True)
- self["text"].setText(("Front Test OK! Press Exit Key"))
+ global fronttest
+ self.fronttimer.stop()
+ eSctest.getInstance().VFD_Close()
+ if self.step == 6:
+ fronttest = 1
+ self.close()
def FrontAnimate(self):
if (self.frontturnonoff==0):
projects / vuplus_dvbapp / blobdiff