from time import localtime, mktime
from datetime import datetime
-from sets import Set
-
def getConfigSatlist(orbpos, satlist):
default_orbpos = None
for x in satlist:
sec.addSatellite(orbpos)
self.configuredSatellites.add(orbpos)
- def addLNBSimple(self, sec, slotid, diseqcmode, toneburstmode = diseqcParam.NO, diseqcpos = diseqcParam.SENDNO, orbpos = 0, longitude = 0, latitude = 0, loDirection = 0, laDirection = 0, turningSpeed = rotorParam.FAST, useInputPower=True, inputPowerDelta=50, fastDiSEqC = False, setVoltageTone = True):
+ def addLNBSimple(self, sec, slotid, diseqcmode, toneburstmode = diseqcParam.NO, diseqcpos = diseqcParam.SENDNO, orbpos = 0, longitude = 0, latitude = 0, loDirection = 0, laDirection = 0, turningSpeed = rotorParam.FAST, useInputPower=True, inputPowerDelta=50, fastDiSEqC = False, setVoltageTone = True, diseqc13V = False):
if orbpos is None or orbpos == 3601:
return
#simple defaults
elif self.linked.has_key(slotid):
for slot in self.linked[slotid]:
tunermask |= (1 << slot)
+ sec.setLNBSatCR(-1)
+ sec.setLNBNum(1)
sec.setLNBLOFL(9750000)
sec.setLNBLOFH(10600000)
sec.setLNBThreshold(11700000)
sec.setRepeats(0)
sec.setFastDiSEqC(fastDiSEqC)
sec.setSeqRepeat(0)
-
- if setVoltageTone:
- sec.setVoltageMode(switchParam.HV)
- sec.setToneMode(switchParam.HILO)
- else:
- sec.setVoltageMode(switchParam._14V)
- sec.setToneMode(switchParam.OFF)
-
sec.setCommandOrder(0)
#user values
if 0 <= diseqcmode < 3:
self.addSatellite(sec, orbpos)
+ if setVoltageTone:
+ if diseqc13V:
+ sec.setVoltageMode(switchParam.HV_13)
+ else:
+ sec.setVoltageMode(switchParam.HV)
+ sec.setToneMode(switchParam.HILO)
+ else:
+ sec.setVoltageMode(switchParam._14V)
+ sec.setToneMode(switchParam.OFF)
elif (diseqcmode == 3): # diseqc 1.2
if self.satposdepends.has_key(slotid):
for slot in self.satposdepends[slotid]:
for x in self.NimManager.satList:
print "Add sat " + str(x[0])
self.addSatellite(sec, int(x[0]))
- sec.setVoltageMode(switchParam.HV)
+ if diseqc13V:
+ sec.setVoltageMode(switchParam.HV_13)
+ else:
+ sec.setVoltageMode(switchParam.HV)
sec.setToneMode(switchParam.HILO)
sec.setRotorPosNum(0) # USALS
def update(self):
sec = secClass.getInstance()
- self.configuredSatellites = Set()
+ self.configuredSatellites = set()
sec.clear() ## this do unlinking NIMs too !!
print "sec config cleared"
print "diseqcmode: ", nim.diseqcMode.value
if nim.diseqcMode.value == "single": #single
if nim.simpleSingleSendDiSEqC.value:
- self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AA)
+ self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AA, diseqc13V = nim.diseqc13V.value)
else:
- self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.NONE, diseqcpos = diseqcParam.SENDNO)
+ self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.NONE, diseqcpos = diseqcParam.SENDNO, diseqc13V = nim.diseqc13V.value)
elif nim.diseqcMode.value == "toneburst_a_b": #Toneburst A/B
- self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.A, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.SENDNO)
- self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcB.orbital_position, toneburstmode = diseqcParam.B, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.SENDNO)
+ self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.A, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.SENDNO, diseqc13V = nim.diseqc13V.value)
+ self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcB.orbital_position, toneburstmode = diseqcParam.B, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.SENDNO, diseqc13V = nim.diseqc13V.value)
elif nim.diseqcMode.value == "diseqc_a_b": #DiSEqC A/B
fastDiSEqC = nim.simpleDiSEqCOnlyOnSatChange.value
setVoltageTone = nim.simpleDiSEqCSetVoltageTone.value
- self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AA, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone)
- self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcB.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AB, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone)
+ self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AA, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone, diseqc13V = nim.diseqc13V.value)
+ self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcB.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AB, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone, diseqc13V = nim.diseqc13V.value)
elif nim.diseqcMode.value == "diseqc_a_b_c_d": #DiSEqC A/B/C/D
fastDiSEqC = nim.simpleDiSEqCOnlyOnSatChange.value
setVoltageTone = nim.simpleDiSEqCSetVoltageTone.value
- self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AA, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone)
- self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcB.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AB, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone)
- self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcC.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.BA, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone)
- self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcD.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.BB, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone)
+ self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AA, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone, diseqc13V = nim.diseqc13V.value)
+ self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcB.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AB, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone, diseqc13V = nim.diseqc13V.value)
+ self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcC.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.BA, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone, diseqc13V = nim.diseqc13V.value)
+ self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcD.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.BB, fastDiSEqC = fastDiSEqC, setVoltageTone = setVoltageTone, diseqc13V = nim.diseqc13V.value)
elif nim.diseqcMode.value == "positioner": #Positioner
if nim.latitudeOrientation.value == "north":
laValue = rotorParam.NORTH
laDirection = laValue,
turningSpeed = turning_speed,
useInputPower = useInputPower,
- inputPowerDelta = inputPowerDelta)
+ inputPowerDelta = inputPowerDelta,
+ diseqc13V = nim.diseqc13V.value)
elif nim.configMode.value == "advanced": #advanced config
self.updateAdvanced(sec, x)
print "sec config completed"
currLnb = config.Nims[slotid].advanced.lnb[x]
sec.addLNB()
+ if x < 33:
+ sec.setLNBNum(x)
+
tunermask = 1 << slotid
if self.equal.has_key(slotid):
for slot in self.equal[slotid]:
for slot in self.linked[slotid]:
tunermask |= (1 << slot)
+ if currLnb.lof.value != "unicable":
+ sec.setLNBSatCR(-1)
+
if currLnb.lof.value == "universal_lnb":
sec.setLNBLOFL(9750000)
sec.setLNBLOFH(10600000)
sec.setLNBThreshold(11700000)
+ elif currLnb.lof.value == "unicable":
+ sec.setLNBLOFL(9750000)
+ sec.setLNBLOFH(10600000)
+ sec.setLNBThreshold(11700000)
+ if currLnb.unicable.value == "unicable_user":
+ sec.setLNBSatCR(currLnb.satcruser.index)
+ sec.setLNBSatCRvco(currLnb.satcrvcouser[currLnb.satcruser.index].value*1000)
+ elif currLnb.unicable.value == "unicable_matrix":
+ manufacturer_name = currLnb.unicableMatrixManufacturer.value
+ manufacturer = currLnb.unicableMatrix[manufacturer_name]
+ product_name = manufacturer.product.value
+ sec.setLNBSatCR(manufacturer.scr[product_name].index)
+ sec.setLNBSatCRvco(manufacturer.vco[product_name][manufacturer.scr[product_name].index].value*1000)
+ elif currLnb.unicable.value == "unicable_lnb":
+ manufacturer_name = currLnb.unicableMatrixManufacturer.value
+ manufacturer = currLnb.unicableMatrix[manufacturer_name]
+ product_name = manufacturer.product.value
+ sec.setLNBSatCR(manufacturer.scr[product_name].index)
+ sec.setLNBSatCRvco(manufacturer.vco[product_name][manufacturer.scr[product_name].index].value*1000)
elif currLnb.lof.value == "c_band":
sec.setLNBLOFL(5150000)
sec.setLNBLOFH(5150000)
sec.setLNBSlotMask(tunermask)
+ sec.setLNBPrio(int(currLnb.prio.value))
+
# finally add the orbital positions
for y in lnbSat[x]:
self.addSatellite(sec, y)
satpos = y
currSat = config.Nims[slotid].advanced.sat[satpos]
if currSat.voltage.value == "polarization":
- sec.setVoltageMode(switchParam.HV)
+ if config.Nims[slotid].diseqc13V.value:
+ sec.setVoltageMode(switchParam.HV_13)
+ else:
+ sec.setVoltageMode(switchParam.HV)
elif currSat.voltage.value == "13V":
sec.setVoltageMode(switchParam._14V)
elif currSat.voltage.value == "18V":
def __init__(self, nimmgr):
self.NimManager = nimmgr
- self.configuredSatellites = Set()
+ self.configuredSatellites = set()
self.update()
class NIM(object):
x.addNotifier(lambda configElement: secClass.setParam(secClass.MOTOR_COMMAND_RETRIES, configElement.value))
config.sec.motor_command_retries = x
+ x = ConfigInteger(default=50, limits = (0, 9999))
+ x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_DISEQC_RESET_CMD, configElement.value))
+ config.sec.delay_after_diseqc_reset_cmd = x
+
+ x = ConfigInteger(default=150, limits = (0, 9999))
+ x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_DISEQC_PERIPHERIAL_POWERON_CMD, configElement.value))
+ config.sec.delay_after_diseqc_peripherial_poweron_cmd = x
+
# TODO add support for satpos depending nims to advanced nim configuration
# so a second/third/fourth cable from a motorized lnb can used behind a
# diseqc 1.0 / diseqc 1.1 / toneburst switch
for x in range(len(nimmgr.nim_slots)):
config.Nims.append(ConfigSubsection())
+ lnb_choices = {
+ "universal_lnb": _("Universal LNB"),
+ "unicable": _("Unicable"),
+ "c_band": _("C-Band"),
+ "user_defined": _("User defined")}
+ lnb_choices_default = "universal_lnb"
+
+ unicablelnbproducts = {
+ "Humax": {"150 SCR":["1210","1420","1680","2040"]},
+ "Inverto": {"IDLP-40UNIQD+S":["1680","1420","2040","1210"]},
+ "Kathrein": {"UAS481":["1400","1516","1632","1748"]},
+ "Kreiling": {"KR1440":["1680","1420","2040","1210"]},
+ "Radix": {"Unicable LNB":["1680","1420","2040","1210"]},
+ "Wisi": {"OC 05":["1210","1420","1680","2040"]}}
+ UnicableLnbManufacturers = unicablelnbproducts.keys()
+ UnicableLnbManufacturers.sort()
+
+ unicablematrixproducts = {
+ "Ankaro": {
+ "UCS 51440":["1400","1632","1284","1516"],
+ "UCS 51820":["1400","1632","1284","1516","1864","2096","1748","1980"],
+ "UCS 51840":["1400","1632","1284","1516","1864","2096","1748","1980"],
+ "UCS 52240":["1400","1632"],
+ "UCS 52420":["1400","1632","1284","1516"],
+ "UCS 52440":["1400","1632","1284","1516"],
+ "UCS 91440":["1400","1632","1284","1516"],
+ "UCS 91820":["1400","1632","1284","1516","1864","2096","1748","1980"],
+ "UCS 91840":["1400","1632","1284","1516","1864","2096","1748","1980"],
+ "UCS 92240":["1400","1632"],
+ "UCS 92420":["1400","1632","1284","1516"],
+ "UCS 92440":["1400","1632","1284","1516"]},
+ "DCT Delta": {
+ "SUM518":["1284","1400","1516","1632","1748","1864","1980","2096"],
+ "SUM918":["1284","1400","1516","1632","1748","1864","1980","2096"],
+ "SUM928":["1284","1400","1516","1632","1748","1864","1980","2096"]},
+ "Inverto": {
+ "IDLP-UST11O-CUO1O-8PP":["1076","1178","1280","1382","1484","1586","1688","1790"]},
+ "Kathrein": {
+ "EXR501":["1400","1516","1632","1748"],
+ "EXR551":["1400","1516","1632","1748"],
+ "EXR552":["1400","1516"]},
+ "ROTEK": {
+ "EKL2/1":["1400","1516"],
+ "EKL2/1E":["0","0","1632","1748"]},
+ "Smart": {
+ "DPA 51":["1284","1400","1516","1632","1748","1864","1980","2096"]},
+ "Technisat": {
+ "TechniRouter 5/1x8 G":["1284","1400","1516","1632","1748","1864","1980","2096"],
+ "TechniRouter 5/1x8 K":["1284","1400","1516","1632","1748","1864","1980","2096"],
+ "TechniRouter 5/2x4 G":["1284","1400","1516","1632"],
+ "TechniRouter 5/2x4 K":["1284","1400","1516","1632"]},
+ "Telstar": {
+ "SCR 5/1x8 G":["1284","1400","1516","1632","1748","1864","1980","2096"],
+ "SCR 5/1x8 K":["1284","1400","1516","1632","1748","1864","1980","2096"],
+ "SCR 5/2x4 G":["1284","1400","1516","1632"],
+ "SCR 5/2x4 K":["1284","1400","1516","1632"]}}
+ UnicableMatrixManufacturers = unicablematrixproducts.keys()
+ UnicableMatrixManufacturers.sort()
+
+ unicable_choices = {
+ "unicable_lnb": _("Unicable LNB"),
+ "unicable_matrix": _("Unicable Martix"),
+ "unicable_user": "Unicable "+_("User defined")}
+ unicable_choices_default = "unicable_lnb"
+
+ unicableLnb = ConfigSubDict()
+ for y in unicablelnbproducts:
+ products = unicablelnbproducts[y].keys()
+ products.sort()
+ unicableLnb[y] = ConfigSubsection()
+ unicableLnb[y].product = ConfigSelection(choices = products, default = products[0])
+ unicableLnb[y].scr = ConfigSubDict()
+ unicableLnb[y].vco = ConfigSubDict()
+ for z in products:
+ scrlist = []
+ vcolist = unicablelnbproducts[y][z]
+ unicableLnb[y].vco[z] = ConfigSubList()
+ for cnt in range(1,1+len(vcolist)):
+ scrlist.append(("%d" %cnt,"SCR %d" %cnt))
+ vcofreq = int(vcolist[cnt-1])
+ unicableLnb[y].vco[z].append(ConfigInteger(default=vcofreq, limits = (vcofreq, vcofreq)))
+ unicableLnb[y].scr[z] = ConfigSelection(choices = scrlist, default = scrlist[0][0])
+
+ unicableMatrix = ConfigSubDict()
+
+ for y in unicablematrixproducts:
+ products = unicablematrixproducts[y].keys()
+ products.sort()
+ unicableMatrix[y] = ConfigSubsection()
+ unicableMatrix[y].product = ConfigSelection(choices = products, default = products[0])
+ unicableMatrix[y].scr = ConfigSubDict()
+ unicableMatrix[y].vco = ConfigSubDict()
+ for z in products:
+ scrlist = []
+ vcolist = unicablematrixproducts[y][z]
+ unicableMatrix[y].vco[z] = ConfigSubList()
+ for cnt in range(1,1+len(vcolist)):
+ vcofreq = int(vcolist[cnt-1])
+ if vcofreq == 0:
+ scrlist.append(("%d" %cnt,"SCR %d " %cnt +_("not used")))
+ else:
+ scrlist.append(("%d" %cnt,"SCR %d" %cnt))
+ unicableMatrix[y].vco[z].append(ConfigInteger(default=vcofreq, limits = (vcofreq, vcofreq)))
+ unicableMatrix[y].scr[z] = ConfigSelection(choices = scrlist, default = scrlist[0][0])
+
+ satcrvcouser = ConfigSubList()
+ satcrvcouser.append(ConfigInteger(default=1284, limits = (0, 9999)))
+ satcrvcouser.append(ConfigInteger(default=1400, limits = (0, 9999)))
+ satcrvcouser.append(ConfigInteger(default=1516, limits = (0, 9999)))
+ satcrvcouser.append(ConfigInteger(default=1632, limits = (0, 9999)))
+ satcrvcouser.append(ConfigInteger(default=1748, limits = (0, 9999)))
+ satcrvcouser.append(ConfigInteger(default=1864, limits = (0, 9999)))
+ satcrvcouser.append(ConfigInteger(default=1980, limits = (0, 9999)))
+ satcrvcouser.append(ConfigInteger(default=2096, limits = (0, 9999)))
+
+ prio_list = [ ("-1", _("Auto")) ]
+ for prio in range(65):
+ prio_list.append((str(prio), str(prio)))
+ for prio in range(14000,14065):
+ prio_list.append((str(prio), str(prio)))
+ for prio in range(19000,19065):
+ prio_list.append((str(prio), str(prio)))
+
for slot in nimmgr.nim_slots:
x = slot.slot
nim = config.Nims[x]
# nim.configMode.value = "simple"
# nim.configMode.save()
+ nim.diseqc13V = ConfigYesNo(default = False)
+
nim.diseqcMode = ConfigSelection(
choices = [
("single", _("Single")),
nim.advanced.lnb = ConfigSubList()
nim.advanced.lnb.append(ConfigNothing())
+
+
for x in range(1, 37):
nim.advanced.lnb.append(ConfigSubsection())
- nim.advanced.lnb[x].lof = ConfigSelection(choices={"universal_lnb": _("Universal LNB"), "c_band": _("C-Band"), "user_defined": _("User defined")}, default="universal_lnb")
+ nim.advanced.lnb[x].lof = ConfigSelection(choices = lnb_choices, default = lnb_choices_default)
+
nim.advanced.lnb[x].lofl = ConfigInteger(default=9750, limits = (0, 99999))
nim.advanced.lnb[x].lofh = ConfigInteger(default=10600, limits = (0, 99999))
nim.advanced.lnb[x].threshold = ConfigInteger(default=11700, limits = (0, 99999))
+
+ nim.advanced.lnb[x].unicable = ConfigSelection(choices = unicable_choices, default = unicable_choices_default)
+
+ nim.advanced.lnb[x].unicableLnb = unicableLnb
+ nim.advanced.lnb[x].unicableLnbManufacturer = ConfigSelection(choices = UnicableLnbManufacturers, default = UnicableLnbManufacturers[0])
+
+ nim.advanced.lnb[x].unicableMatrix = unicableMatrix
+ nim.advanced.lnb[x].unicableMatrixManufacturer = ConfigSelection(choices = UnicableMatrixManufacturers, default = UnicableMatrixManufacturers[0])
+
+ nim.advanced.lnb[x].satcruser = ConfigSelection(choices=[
+ ("1", "SatCR 1"),
+ ("2", "SatCR 2"),
+ ("3", "SatCR 3"),
+ ("4", "SatCR 4"),
+ ("5", "SatCR 5"),
+ ("6", "SatCR 6"),
+ ("7", "SatCR 7"),
+ ("8", "SatCR 8")],
+ default="1")
+ nim.advanced.lnb[x].satcrvcouser = satcrvcouser
+
# nim.advanced.lnb[x].output_12v = ConfigSelection(choices = [("0V", _("0 V")), ("12V", _("12 V"))], default="0V")
nim.advanced.lnb[x].increased_voltage = ConfigYesNo(default=False)
nim.advanced.lnb[x].toneburst = ConfigSelection(choices = [("none", _("None")), ("A", _("A")), ("B", _("B"))], default = "none")
nim.advanced.lnb[x].fastTurningBegin = ConfigDateTime(default=mktime(btime.timetuple()), formatstring = _("%H:%M"), increment = 600)
etime = datetime(1970, 1, 1, 19, 0);
nim.advanced.lnb[x].fastTurningEnd = ConfigDateTime(default=mktime(etime.timetuple()), formatstring = _("%H:%M"), increment = 600)
+ nim.advanced.lnb[x].prio = ConfigSelection(default="-1", choices=prio_list)
elif slot.isCompatible("DVB-C"):
nim.configMode = ConfigSelection(
choices = {
projects / vuplus_dvbapp / blobdiff