{
bool rotor=false;
eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx];
+ bool is_unicable = lnb_param.SatCR_idx != -1;
+ bool is_unicable_position_switch = lnb_param.SatCR_positions > 1;
+
if ( lnb_param.m_slot_mask & slot_id ) // lnb for correct tuner?
{
int ret = 0;
eSecDebugNoSimulate("ret1 %d", ret);
- if (linked_in_use)
+ if (linked_in_use && !is_unicable)
{
// compare tuner data
if ( (csw != linked_csw) ||
ret += 15;
eSecDebugNoSimulate("ret2 %d", ret);
}
- else if (satpos_depends_ptr != -1)
+ else if ((satpos_depends_ptr != -1) && !(is_unicable && is_unicable_position_switch))
{
eSecDebugNoSimulate("satpos depends");
eDVBRegisteredFrontend *satpos_depends_to_fe = (eDVBRegisteredFrontend*) satpos_depends_ptr;
else
ret += 10;
}
+ eSecDebugNoSimulate("ret3 %d", ret);
}
else // current fe is dependent of another tuner ... (so this fe can't turn the rotor!)
{
ret = 0;
}
}
- eSecDebugNoSimulate("ret3 %d", ret);
+ eSecDebugNoSimulate("ret4 %d", ret);
}
- else if (!direct_connected)
- ret = 0;
-
- eSecDebugNoSimulate("ret4 %d", ret);
if (ret && rotor && rotor_pos != -1)
ret -= abs(rotor_pos-sat.orbital_position);
eSecDebugNoSimulate("ret5 %d", ret);
- if (ret)
+ if (ret && !is_unicable)
{
int lof = sat.frequency > lnb_param.m_lof_threshold ?
lnb_param.m_lof_hi : lnb_param.m_lof_lo;
if ( sit != lnb_param.m_satellites.end())
{
eSecCommandList sec_sequence;
-
- lnb_param.guard_offset = 0; //HACK
-
- frontend.setData(eDVBFrontend::SATCR, lnb_param.SatCR_idx);
-
eDVBSatelliteSwitchParameters &sw_param = sit->second;
bool doSetFrontend = true;
bool doSetVoltageToneFrontend = true;
eDVBSatelliteDiseqcParameters::t_diseqc_mode diseqc_mode = di_param.m_diseqc_mode;
eDVBSatelliteSwitchParameters::t_voltage_mode voltage_mode = sw_param.m_voltage_mode;
bool diseqc13V = voltage_mode == eDVBSatelliteSwitchParameters::HV_13;
+ bool is_unicable = lnb_param.SatCR_idx != -1;
+
+ lnb_param.guard_offset = 0; //HACK
+
+ frontend.setData(eDVBFrontend::SATCR, lnb_param.SatCR_idx);
if (diseqc13V)
voltage_mode = eDVBSatelliteSwitchParameters::HV;
int lof = (band&1)?lnb_param.m_lof_hi:lnb_param.m_lof_lo;
- int local=0;
-
-
- if(lnb_param.SatCR_idx == -1)
+ if(!is_unicable)
{
- // calc Frequency
- local = abs(sat.frequency
- - ((lof - (lof % 1000)) + ((lof % 1000)>500 ? 1000 : 0)) ); //TODO für den Mist mal ein Macro schreiben
- parm.FREQUENCY = (local - (local % 125)) + ((local % 125)>62 ? 125 : 0);
+ // calc Frequency
+ int local= abs(sat.frequency
+ - lof);
+ parm.FREQUENCY = ((((local * 2) / 125) + 1) / 2) * 125;
frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - parm.FREQUENCY);
if ( voltage_mode == eDVBSatelliteSwitchParameters::_14V
}
else
{
- unsigned int tmp = abs(sat.frequency
- - ((lof - (lof % 1000)) + ((lof % 1000)>500 ? 1000 : 0)) )
+ int tmp1 = abs(sat.frequency
+ -lof)
+ lnb_param.SatCRvco
- 1400000
+ lnb_param.guard_offset;
- parm.FREQUENCY = (lnb_param.SatCRvco - (tmp % 4000))+((tmp%4000)>2000?4000:0)+lnb_param.guard_offset;
- lnb_param.UnicableTuningWord = (((tmp / 4000)+((tmp%4000)>2000?1:0))
+ int tmp2 = ((((tmp1 * 2) / 4000) + 1) / 2) * 4000;
+ parm.FREQUENCY = lnb_param.SatCRvco - (tmp1-tmp2) + lnb_param.guard_offset;
+ lnb_param.UnicableTuningWord = ((tmp2 / 4000)
| ((band & 1) ? 0x400 : 0) //HighLow
| ((band & 2) ? 0x800 : 0) //VertHor
| ((lnb_param.LNBNum & 1) ? 0 : 0x1000) //Umschaltung LNB1 LNB2
| (lnb_param.SatCR_idx << 13)); //Adresse des SatCR
eDebug("[prepare] UnicableTuningWord %#04x",lnb_param.UnicableTuningWord);
eDebug("[prepare] guard_offset %d",lnb_param.guard_offset);
- frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - ((lnb_param.UnicableTuningWord & 0x3FF) *4000 + 1400000 - lnb_param.SatCRvco + lof));
+ frontend.setData(eDVBFrontend::FREQ_OFFSET, (lnb_param.UnicableTuningWord & 0x3FF) *4000 + 1400000 + lof - (2 * (lnb_param.SatCRvco - (tmp1-tmp2))) );
}
if (diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0)
if ( send_mask )
{
+ int diseqc_repeats = diseqc_mode > eDVBSatelliteDiseqcParameters::V1_0 ? di_param.m_repeats : 0;
int vlt = iDVBFrontend::voltageOff;
eSecCommand::pair compare;
compare.steps = +3;
if ( send_mask & 2 )
++loops;
- loops <<= di_param.m_repeats;
+ loops <<= diseqc_repeats;
for ( int i = 0; i < loops;) // fill commands...
{
int tmp = m_params[DELAY_BETWEEN_DISEQC_REPEATS];
if (cmd)
{
- int delay = di_param.m_repeats ? (tmp - 54) / 2 : tmp; // standard says 100msek between two repeated commands
+ int delay = diseqc_repeats ? (tmp - 54) / 2 : tmp; // standard says 100msek between two repeated commands
sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, delay) );
diseqc.data[2]=cmd;
diseqc.data[3]=(cmd==0x38) ? csw : ucsw;
if ( RotorCmd != -1 && RotorCmd != lastRotorCmd )
{
eSecCommand::pair compare;
- if (!send_mask && lnb_param.SatCR_idx == -1)
+ if (!send_mask && !is_unicable)
{
compare.steps = +3;
compare.tone = iDVBFrontend::toneOff;
diseqc.data[3] = RotorCmd;
diseqc.data[4] = 0x00;
}
- if(lnb_param.SatCR_idx == -1)
+// if(!is_unicable)
{
int mrt = m_params[MOTOR_RUNNING_TIMEOUT]; // in seconds!
- if ( rotor_param.m_inputpower_parameters.m_use )
+ if ( rotor_param.m_inputpower_parameters.m_use && !is_unicable)
{ // use measure rotor input power to detect rotor state
bool turn_fast = need_turn_fast(rotor_param.m_inputpower_parameters.m_turning_speed);
eSecCommand::rotor cmd;
sec_fe->setData(eDVBFrontend::NEW_UCSW, ucsw);
sec_fe->setData(eDVBFrontend::NEW_TONEBURST, di_param.m_toneburst_param);
- if ((doSetVoltageToneFrontend) && (lnb_param.SatCR_idx == -1))
+ if (doSetVoltageToneFrontend && !is_unicable)
{
eSecCommand::pair compare;
compare.voltage = voltage;
sec_sequence.push_back( eSecCommand(eSecCommand::UPDATE_CURRENT_SWITCHPARMS) );
- if(lnb_param.SatCR_idx != -1)
+ if(is_unicable)
{
// check if voltage is disabled
eSecCommand::pair compare;
return -1;
}
+void eDVBSatelliteEquipmentControl::prepareTurnOffSatCR(iDVBFrontend &frontend, int satcr)
+{
+ eSecCommandList sec_sequence;
+
+ // check if voltage is disabled
+ eSecCommand::pair compare;
+ compare.steps = +9; //only close frontend
+ compare.voltage = iDVBFrontend::voltageOff;
+
+ sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS]) );
+
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage18_5) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS]) );
+
+ eDVBDiseqcCommand diseqc;
+ memset(diseqc.data, 0, MAX_DISEQC_LENGTH);
+ diseqc.len = 5;
+ diseqc.data[0] = 0xE0;
+ diseqc.data[1] = 0x10;
+ diseqc.data[2] = 0x5A;
+ diseqc.data[3] = satcr << 5;
+ diseqc.data[4] = 0x00;
+
+ sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) );
+ sec_sequence.push_back( eSecCommand(eSecCommand::DELAYED_CLOSE_FRONTEND) );
+
+ frontend.setSecSequence(sec_sequence);
+}
+
RESULT eDVBSatelliteEquipmentControl::clear()
{
eSecDebug("eDVBSatelliteEquipmentControl::clear()");
//reset some tuner configuration
for (eSmartPtrList<eDVBRegisteredFrontend>::iterator it(m_avail_frontends.begin()); it != m_avail_frontends.end(); ++it)
{
- long tmp;
- char c;
- if (sscanf(it->m_frontend->getDescription(), "BCM450%c (internal)", &c) == 1 && !it->m_frontend->getData(eDVBFrontend::LINKED_PREV_PTR, tmp) && tmp != -1)
- {
- FILE *f=fopen("/proc/stb/tsmux/lnb_b_input", "w");
- if (!f || fwrite("B", 1, 1, f) != 1)
- eDebug("set /proc/stb/tsmux/lnb_b_input to B failed!! (%m)");
- else
- {
- eDebug("set /proc/stb/tsmux/lnb_b_input to B OK");
- fclose(f);
- }
- }
it->m_frontend->setData(eDVBFrontend::SATPOS_DEPENDS_PTR, -1);
it->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, -1);
it->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, -1);
return -ENOENT;
return 0;
}
+
+RESULT eDVBSatelliteEquipmentControl::setLNBSatCRpositions(int SatCR_positions)
+{
+ eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCRpositions(%d)", SatCR_positions);
+ if(SatCR_positions < 1 || SatCR_positions > 2)
+ return -EPERM;
+ if ( currentLNBValid() )
+ m_lnbs[m_lnbidx].SatCR_positions = SatCR_positions;
+ else
+ return -ENOENT;
+ return 0;
+}
+
+RESULT eDVBSatelliteEquipmentControl::getLNBSatCRpositions()
+{
+ if ( currentLNBValid() )
+ return m_lnbs[m_lnbidx].SatCR_positions;
+ return -ENOENT;
+}
+
RESULT eDVBSatelliteEquipmentControl::getLNBSatCR()
{
if ( currentLNBValid() )
char c;
p1->m_frontend->setData(eDVBFrontend::LINKED_PREV_PTR, (long)p2);
p2->m_frontend->setData(eDVBFrontend::LINKED_NEXT_PTR, (long)p1);
- if (!strcmp(p1->m_frontend->getDescription(), p2->m_frontend->getDescription()) && sscanf(p1->m_frontend->getDescription(), "BCM450%c (internal)", &c) == 1)
- {
- FILE *f=fopen("/proc/stb/tsmux/lnb_b_input", "w");
- if (!f || fwrite("A", 1, 1, f) != 1)
- eDebug("set /proc/stb/tsmux/lnb_b_input to A failed!! (%m)");
- else
- {
- eDebug("set /proc/stb/tsmux/lnb_b_input to A OK");
- fclose(f);
- }
- }
}
p1=p2=NULL;
projects / vuplus_dvbapp / blobdiff