require ti-paths.inc
-# TODO update this...
-# https://www-a.ti.com/downloads/sds_support/applications_packages/dmai/dmai_1_20_00_06/dmai_setuplinux_1_20_00_06.bin
-# Install the above link and put the omap3530_dvsdk_combos_3_16.tar.gz file in the same directory as this recipe
-SRC_URI = "file://omap3530_dvsdk_combos_3_16.tar.gz \
- "
+SRC_URI = "http://software-dl.ti.com/sdo/sdo_apps_public_sw/omap3530_dvsdk_combos_tspa/omap3530_dvsdk_combos_tspa-3_16-Linux-x86.bin \
+ "
S = "${WORKDIR}/omap3530_dvsdk_combos_3_16"
+
# Yes, the xdc stuff still breaks with a '.' in PWD
PV = "316"
-PR = "r11"
+PR = "r13"
TARGET = "all"
export CE_INSTALL_DIR="${STAGING_DIR}/${MULTIMACH_TARGET_SYS}/ti-codec-engine/packages;${STAGING_DIR}/${MULTIMACH_TARGET_SYS}/ti-codec-engine/cetools"
+# Needed for now since makefile in latest package assumes this is set
+export CODEC_INSTALL_DIR="${S}"
+
+# Helper function to run the binary installer and unpack the tar.gz in the same place as it was before - this could be optimised later
+do_accept_license() {
+ export HOME="${WORKDIR}"
+ chmod +x ${WORKDIR}/omap3530_dvsdk_combos_tspa-3_16-Linux-x86.bin
+ ${WORKDIR}/omap3530_dvsdk_combos_tspa-3_16-Linux-x86.bin --mode silent --prefix ${S}_install
+ cd "${S}_install"
+ tar -xzvf omap3530_dvsdk_combos_tspa_3_16.tar.gz
+ if [ -d ${S} ] ; then
+ rm -rf ${S}
+ fi
+ mv omap3530_dvsdk_combos_tspa_3_16 ${S}
+}
+
+addtask accept_license after do_unpack before do_configure
+
do_compile() {
- sed -i -e s:/db/toolsrc/library/vendors2005/ti/c6x/6.0.16/Linux:${TITOOLSDIR}/${TICGTOOLSDIR}:g \
- -e s:arm-none-linux-gnueabi-:${TARGET_PREFIX}:g \
- -e s:/home/dvsdkval/workdir/OMAP3530/nfs/workdir/opt/toolchain/arm-2007q3:${CROSS_DIR}:g \
+
+ # For now, remove the reference to Rules.make and swap prod for eval, since this only has eval libs included
+ sed -i \
+ -e '/Rules.make/d' \
+ -e 's:$(FC_INSTALL_DIR)/packages;::g' \
+ -e 's:$(XDAIS_INSTALL_DIR)/packages;::g' \
+ -e 's:$(FC_INSTALL_DIR)/fctools/packages;::g' \
+ -e 's:$(BIOSUTILS_INSTALL_DIR)/packages;::g' \
+ -e 's:$(CMEM_INSTALL_DIR)/packages;::g' \
+ -e 's:$(LINK_INSTALL_DIR)/packages;::g' \
+ -e 's:$(LPM_INSTALL_DIR)/packages;::g' \
+ -e s:prod:eval:g \
+ ${S}/Makefile
+
+ # Fix-up config.bld to swap out hardcoded references to tools paths
+ sed -i -e s:/opt/dmsw/cg6x_6_0_16:${TITOOLSDIR}/${TICGTOOLSDIR}:g \
${S}/config.bld
+ # Add make target to allow package to be prepared for building (normally this package is a binary release)
+ echo "makebuildable:
+ \$(XDC) .make -PR .
+" >> ${S}/Makefile
+
+ oe_runmake makebuildable
oe_runmake clean
oe_runmake
}
install ${i} ${D}/${datadir}/ti-codec-combos
done
- # should copy the generated data sheets as well for reference
+ # copy the generated data sheets as well for reference
+ #for i in $(find . -name "*.DataSheet.*") ; do
+
+ # infact, just copy all the html files (including the server datasheets) from the distro
+ # - this includes top level html (with codec versions) + some qualiTI codec test reports
+ for i in $(find . -name "*.html") ; do
+ install ${i} ${D}/${datadir}/ti-codec-combos
+ done
+
}
do_stage () {