#
# To use it add that line to conf/local.conf:
#
-# INHERIT = "packaged-staging"
+# INHERIT += "packaged-staging"
+#
+
+
+#
+# bitbake.conf set PSTAGING_ACTIVE = "0", this class sets to "1" if we're active
+#
+PSTAGE_PKGVERSION = "${PV}-${PR}"
+PSTAGE_PKGARCH = "${BUILD_SYS}"
+PSTAGE_EXTRAPATH ?= "/${OELAYOUT_ABI}/${DISTRO_PR}/"
+PSTAGE_PKGPATH = "${DISTRO}${PSTAGE_EXTRAPATH}"
+PSTAGE_PKGPN = "${@bb.data.expand('staging-${PN}-${MULTIMACH_ARCH}${TARGET_VENDOR}-${TARGET_OS}', d).replace('_', '-')}"
+PSTAGE_PKGNAME = "${PSTAGE_PKGPN}_${PSTAGE_PKGVERSION}_${PSTAGE_PKGARCH}.ipk"
+PSTAGE_PKG ?= "${DEPLOY_DIR_PSTAGE}/${PSTAGE_PKGPATH}/${PSTAGE_PKGNAME}"
+
+PSTAGE_NATIVEDEPENDS = "\
+ shasum-native \
+ stagemanager-native \
+ "
+
+BB_STAMP_WHITELIST = "${PSTAGE_NATIVEDEPENDS}"
python () {
- import bb
- if not bb.data.inherits_class('native', d) and not bb.data.inherits_class('image', d) and not bb.data.inherits_class('cross', d) and not bb.data.inherits_class('sdk', d):
- deps = bb.data.getVarFlag('do_populate_staging', 'depends', d) or ""
+ pstage_allowed = True
+
+ # These classes encode staging paths into the binary data so can only be
+ # reused if the path doesn't change/
+ if bb.data.inherits_class('native', d) or bb.data.inherits_class('cross', d) or bb.data.inherits_class('sdk', d):
+ path = bb.data.getVar('PSTAGE_PKGPATH', d, 1)
+ path = path + bb.data.getVar('TMPDIR', d, 1).replace('/', '-')
+ bb.data.setVar('PSTAGE_PKGPATH', path, d)
+
+ # PSTAGE_NATIVEDEPENDS lists the packages we need before we can use packaged
+ # staging. There will always be some packages we depend on.
+ if bb.data.inherits_class('native', d):
+ pn = bb.data.getVar('PN', d, True)
+ nativedeps = bb.data.getVar('PSTAGE_NATIVEDEPENDS', d, True).split()
+ if pn in nativedeps:
+ pstage_allowed = False
+
+ # Images aren't of interest to us
+ if bb.data.inherits_class('image', d):
+ pstage_allowed = False
+
+ if bb.data.getVar('PSTAGING_DISABLED', d, True) == "1":
+ pstage_allowed = False
+
+ # Add task dependencies if we're active, otherwise mark packaged staging
+ # as inactive.
+ if pstage_allowed:
+ deps = bb.data.getVarFlag('do_setscene', 'depends', d) or ""
deps += " stagemanager-native:do_populate_staging"
- bb.data.setVarFlag('do_populate_staging', 'depends', deps, d)
+ bb.data.setVarFlag('do_setscene', 'depends', deps, d)
+
+ policy = bb.data.getVar("BB_STAMP_POLICY", d, True)
+ if policy == "whitelist" or policy == "full":
+ deps = bb.data.getVarFlag('do_setscene', 'recrdeptask', d) or ""
+ deps += " do_setscene"
+ bb.data.setVarFlag('do_setscene', 'recrdeptask', deps, d)
- deps = bb.data.getVarFlag('do_prepackaged_stage', 'depends', d) or ""
- deps += " ipkg-native:do_populate_staging ipkg-utils-native:do_populate_staging"
- bb.data.setVarFlag('do_prepackaged_stage', 'depends', deps, d)
+ bb.data.setVar("PSTAGING_ACTIVE", "1", d)
else:
- bb.data.setVar("PSTAGING_DISABLED", "1", d)
+ bb.data.setVar("PSTAGING_ACTIVE", "0", d)
}
-export PSTAGING_DISABLED = "0"
+DEPLOY_DIR_PSTAGE ?= "${DEPLOY_DIR}/pstage"
+PSTAGE_MACHCONFIG = "${DEPLOY_DIR_PSTAGE}/opkg.conf"
-DEPLOY_DIR_PSTAGE = "${DEPLOY_DIR}/pstage"
+PSTAGE_PKGMANAGER = "stage-manager-ipkg"
-PSTAGE_BUILD_CMD = "${IPKGBUILDCMD}"
-PSTAGE_INSTALL_CMD = "ipkg-cl install -force-depends -f ${DEPLOY_DIR_PSTAGE}/ipkg-${MACHINE}.conf -o ${TMPDIR}"
-PSTAGE_UPDATE_CMD = "ipkg-cl update -f ${DEPLOY_DIR_PSTAGE}/ipkg-${MACHINE}.conf -o ${TMPDIR}"
-PSTAGE_REMOVE_CMD = "ipkg-cl remove -force-depends -f ${DEPLOY_DIR_PSTAGE}/ipkg-${MACHINE}.conf -o ${TMPDIR}"
-PSTAGE_LIST_CMD = "ipkg-cl list_installed -f ${DEPLOY_DIR_PSTAGE}/ipkg-${MACHINE}.conf -o ${TMPDIR}"
-PSTAGE_PKGNAME = "staging-${PN}_${PV}-${PR}_${MULTIMACH_ARCH}.ipk"
+PSTAGE_BUILD_CMD = "stage-manager-ipkg-build -o 0 -g 0"
+PSTAGE_INSTALL_CMD = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -force-depends -o ${TMPDIR} install"
+PSTAGE_UPDATE_CMD = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -o ${TMPDIR} update"
+PSTAGE_REMOVE_CMD = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -force-depends -o ${TMPDIR} remove"
+PSTAGE_LIST_CMD = "${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -o ${TMPDIR} list_installed"
PSTAGE_TMPDIR_STAGE = "${WORKDIR}/staging-pkg"
-do_clean_append() {
- """
- Clear the build and temp directories
- """
- bb.note("Uninstalling package from staging...")
- path = bb.data.getVar("PATH", d, 1)
- removecmd = bb.data.getVar("PSTAGE_REMOVE_CMD", d, 1)
- removepkg = bb.data.expand("staging-${PN}", d)
- ret = os.system("PATH=\"%s\" %s %s" % (path, removecmd, removepkg))
- if ret != 0:
- bb.note("Failure removing staging package")
+def pstage_manualclean(srcname, destvarname, d):
+ src = os.path.join(bb.data.getVar('PSTAGE_TMPDIR_STAGE', d, True), srcname)
+ dest = bb.data.getVar(destvarname, d, True)
- stagepkg = bb.data.expand("${DEPLOY_DIR_PSTAGE}/${PSTAGE_PKGNAME}", d)
- bb.note("Removing staging package %s" % stagepkg)
- #os.system('rm -rf ' + stagepkg)
+ for walkroot, dirs, files in os.walk(src):
+ for file in files:
+ filepath = os.path.join(walkroot, file).replace(src, dest)
+ bb.note("rm %s" % filepath)
+ os.system("rm %s" % filepath)
+
+def pstage_set_pkgmanager(d):
+ path = bb.data.getVar("PATH", d, 1)
+ pkgmanager = bb.which(path, 'opkg-cl')
+ if pkgmanager == "":
+ pkgmanager = bb.which(path, 'ipkg-cl')
+ if pkgmanager != "":
+ bb.data.setVar("PSTAGE_PKGMANAGER", pkgmanager, d)
+
+
+def pstage_cleanpackage(pkgname, d):
+ path = bb.data.getVar("PATH", d, 1)
+ pstage_set_pkgmanager(d)
+ list_cmd = bb.data.getVar("PSTAGE_LIST_CMD", d, True)
+
+ bb.debug(2, "Checking if staging package installed")
+ lf = bb.utils.lockfile(bb.data.expand("${SYSROOT_LOCK}", d))
+ ret = os.system("PATH=\"%s\" %s | grep %s" % (path, list_cmd, pkgname))
+ if ret == 0:
+ bb.debug(1, "Uninstalling package from staging...")
+ removecmd = bb.data.getVar("PSTAGE_REMOVE_CMD", d, 1)
+ ret = os.system("PATH=\"%s\" %s %s" % (path, removecmd, pkgname))
+ if ret != 0:
+ bb.note("Failure removing staging package")
+ else:
+ bb.debug(1, "Manually removing any installed files from staging...")
+ pstage_manualclean("staging", "STAGING_DIR", d)
+ pstage_manualclean("cross", "CROSS_DIR", d)
+ pstage_manualclean("deploy", "DEPLOY_DIR", d)
+
+ bb.utils.unlockfile(lf)
+
+do_clean_prepend() {
+ """
+ Clear the build and temp directories
+ """
+
+ removepkg = bb.data.expand("${PSTAGE_PKGPN}", d)
+ pstage_cleanpackage(removepkg, d)
+
+ stagepkg = bb.data.expand("${PSTAGE_PKG}", d)
+ bb.note("Removing staging package %s" % base_path_out(stagepkg, d))
+ os.system('rm -rf ' + stagepkg)
}
staging_helper () {
- #assemble appropriate ipkg.conf
- conffile=${DEPLOY_DIR_PSTAGE}/ipkg-${MACHINE}.conf
+ # Assemble appropriate opkg.conf
+ conffile=${PSTAGE_MACHCONFIG}
mkdir -p ${DEPLOY_DIR_PSTAGE}/pstaging_lists
if [ ! -e $conffile ]; then
- ipkgarchs="${BUILD_ARCH} all any noarch ${TARGET_ARCH} ${PACKAGE_ARCHS} ${PACKAGE_EXTRA_ARCHS} ${MACHINE}"
+ ipkgarchs="${BUILD_SYS}"
priority=1
for arch in $ipkgarchs; do
echo "arch $arch $priority" >> $conffile
priority=$(expr $priority + 5)
done
- echo "src oe-staging file:${DEPLOY_DIR_PSTAGE}" >> $conffile
-
- OLD_PWD=`pwd`
- cd ${DEPLOY_DIR_PSTAGE}
- ipkg-make-index -p Packages .
- cd ${OLD_PWD}
-
- ${PSTAGE_UPDATE_CMD}
+ echo "dest root /" >> $conffile
+ fi
+ if [ ! -e ${TMPDIR}${libdir_native}/opkg/info/ ]; then
+ mkdir -p ${TMPDIR}${libdir_native}/opkg/info/
+ fi
+ if [ ! -e ${TMPDIR}${libdir_native}/ipkg/ ]; then
+ ln -sf opkg/ ${TMPDIR}${libdir_native}/ipkg || true
fi
}
-python do_prepackaged_stage () {
- import os
+PSTAGE_TASKS_COVERED = "fetch unpack munge patch configure qa_configure rig_locales compile sizecheck install deploy package populate_staging package_write_deb package_write_ipk package_write package_stage qa_staging"
+
+SCENEFUNCS += "packagestage_scenefunc"
- if bb.data.getVar("PSTAGING_DISABLED", d, 1) == "1":
- bb.build.make_stamp("do_prepackaged_stage", d)
+python packagestage_scenefunc () {
+ if bb.data.getVar("PSTAGING_ACTIVE", d, 1) == "0":
return
- bb.note("Uninstalling any existing package from staging...")
- path = bb.data.getVar("PATH", d, 1)
- removecmd = bb.data.getVar("PSTAGE_REMOVE_CMD", d, 1)
- removepkg = bb.data.expand("staging-${PN}", d)
- lf = bb.utils.lockfile(bb.data.expand("${STAGING_DIR}/staging.lock", d))
- ret = os.system("PATH=\"%s\" %s %s" % (path, removecmd, removepkg))
- bb.utils.unlockfile(lf)
- if ret != 0:
- bb.note("Failure attempting to remove staging package")
+ bb.build.exec_func("staging_helper", d)
+
+ removepkg = bb.data.expand("${PSTAGE_PKGPN}", d)
- stagepkg = bb.data.expand("${DEPLOY_DIR_PSTAGE}/${PSTAGE_PKGNAME}", d)
+ pstage_cleanpackage(removepkg, d)
+
+ stagepkg = bb.data.expand("${PSTAGE_PKG}", d)
if os.path.exists(stagepkg):
- bb.note("Following speedup\n")
path = bb.data.getVar("PATH", d, 1)
- installcmd = bb.data.getVar("PSTAGE_INSTALL_CMD", d, 1)
-
- bb.build.exec_func("staging_helper", d)
+ pstage_set_pkgmanager(d)
+ file = bb.data.getVar("FILE", d, True)
+ bb.debug(2, "Packaged staging active for %s\n" % file)
+
+ #
+ # Install the staging package somewhere temporarily so we can extract the stamp files
+ #
+ bb.mkdirhier(bb.data.expand("${WORKDIR}/tstage/${libdir_native}/opkg/info/ ", d))
+ cmd = bb.data.expand("${PSTAGE_PKGMANAGER} -f ${PSTAGE_MACHCONFIG} -force-depends -o ${WORKDIR}/tstage install", d)
+ ret = os.system("PATH=\"%s\" %s %s" % (path, cmd, stagepkg))
+ if ret != 0:
+ bb.fatal("Couldn't install the staging package to a temp directory")
- bb.debug(1, "Staging stuff already packaged, using that instead")
- lf = bb.utils.lockfile(bb.data.expand("${STAGING_DIR}/staging.lock", d))
- ret = os.system("PATH=\"%s\" %s %s" % (path, installcmd, stagepkg))
- bb.utils.unlockfile(lf)
+ #
+ # Copy the stamp files into the main stamps directoy
+ #
+ cmd = bb.data.expand("cp -dpR ${WORKDIR}/tstage/stamps/* ${TMPDIR}/stamps/", d)
+ ret = os.system(cmd)
if ret != 0:
- bb.note("Failure installing prestage package")
-
- bb.build.make_stamp("do_prepackaged_stage", d)
- bb.build.make_stamp("do_fetch", d)
- bb.build.make_stamp("do_unpack", d)
- bb.build.make_stamp("do_munge", d)
- bb.build.make_stamp("do_patch", d)
- bb.build.make_stamp("do_configure", d)
- bb.build.make_stamp("do_qa_configure", d)
- bb.build.make_stamp("do_rig_locales", d)
- bb.build.make_stamp("do_compile", d)
- bb.build.make_stamp("do_install", d)
- bb.build.make_stamp("do_deploy", d)
- bb.build.make_stamp("do_package", d)
- bb.build.make_stamp("do_populate_staging", d)
- bb.build.make_stamp("do_package_write_deb", d)
- bb.build.make_stamp("do_package_write_ipk", d)
- bb.build.make_stamp("do_package_write", d)
- bb.build.make_stamp("do_package_stage", d)
- bb.build.make_stamp("do_qa_staging", d)
+ bb.fatal("Couldn't copy the staging package stamp files")
+
+ #
+ # Iterate over the stamps seeing if they're valid. If we find any that
+ # are invalid or the task wasn't in the taskgraph, assume caution and
+ # do a rebuild.
+ #
+ # FIXME - some tasks are safe to ignore in the task graph. e.g. package_write_*
+ stageok = True
+ taskscovered = bb.data.getVar("PSTAGE_TASKS_COVERED", d, True).split()
+ stamp = bb.data.getVar("STAMP", d, True)
+ for task in taskscovered:
+ task = 'do_' + task
+ stampfn = "%s.%s" % (stamp, task)
+ bb.debug(1, "Checking %s" % (stampfn))
+ if os.path.exists(stampfn):
+ stageok = bb.runqueue.check_stamp_fn(file, task, d)
+ bb.debug(1, "Result %s" % (stageok))
+ if not stageok:
+ break
+
+ # Remove the stamps and files we added above
+ # FIXME - we should really only remove the stamps we added
+ os.system('rm -f ' + stamp + '.*')
+ os.system(bb.data.expand("rm -rf ${WORKDIR}/tstage", d))
+
+ if stageok:
+ bb.note("Staging package found, using it for %s." % file)
+ installcmd = bb.data.getVar("PSTAGE_INSTALL_CMD", d, 1)
+ lf = bb.utils.lockfile(bb.data.expand("${SYSROOT_LOCK}", d))
+ ret = os.system("PATH=\"%s\" %s %s" % (path, installcmd, stagepkg))
+ bb.utils.unlockfile(lf)
+ if ret != 0:
+ bb.note("Failure installing prestage package")
+
+ bb.build.make_stamp("do_stage_package_populated", d)
+ else:
+ bb.note("Staging package found but invalid for %s" % file)
- else:
- bb.build.make_stamp("do_prepackaged_stage", d)
}
-do_prepackaged_stage[cleandirs] = "${PSTAGE_TMPDIR_STAGE}"
-do_prepackaged_stage[selfstamp] = "1"
-addtask prepackaged_stage before do_fetch
+packagestage_scenefunc[cleandirs] = "${PSTAGE_TMPDIR_STAGE}"
+packagestage_scenefunc[dirs] = "${STAGING_DIR}"
+
+addhandler packagedstage_stampfixing_eventhandler
+python packagedstage_stampfixing_eventhandler() {
+ if bb.event.getName(e) == "StampUpdate":
+ taskscovered = bb.data.getVar("PSTAGE_TASKS_COVERED", e.data, 1).split()
+ for (fn, task) in e.targets:
+ # strip off 'do_'
+ task = task[3:]
+ if task in taskscovered:
+ stamp = "%s.do_stage_package_populated" % e.stampPrefix[fn]
+ if os.path.exists(stamp):
+ # We're targetting a task which was skipped with packaged staging
+ # so we need to remove the autogenerated stamps.
+ for task in taskscovered:
+ dir = "%s.do_%s" % (e.stampPrefix[fn], task)
+ os.system('rm -f ' + dir)
+ os.system('rm -f ' + stamp)
+
+ return NotHandled
+}
populate_staging_preamble () {
- if [ "$PSTAGING_DISABLED" != "1" ]; then
- #mkdir -p ${DEPLOY_DIR_PSTAGE}
-
- stage-manager -p ${STAGING_DIR} -c ${DEPLOY_DIR_PSTAGE}/stamp-cache-staging -u
- stage-manager -p ${CROSS_DIR} -c ${DEPLOY_DIR_PSTAGE}/stamp-cache-cross -u
+ if [ "$PSTAGING_ACTIVE" = "1" ]; then
+ stage-manager -p ${STAGING_DIR} -c ${DEPLOY_DIR_PSTAGE}/stamp-cache-staging -u || true
+ stage-manager -p ${CROSS_DIR} -c ${DEPLOY_DIR_PSTAGE}/stamp-cache-cross -u || true
fi
}
populate_staging_postamble () {
- if [ "$PSTAGING_DISABLED" != "1" ]; then
+ if [ "$PSTAGING_ACTIVE" = "1" ]; then
# list the packages currently installed in staging
- ${PSTAGE_LIST_CMD} | awk '{print $1}' > ${DEPLOY_DIR_PSTAGE}/installed-list
+ # ${PSTAGE_LIST_CMD} | awk '{print $1}' > ${DEPLOY_DIR_PSTAGE}/installed-list
+ # exitcode == 5 is ok, it means the files change
set +e
stage-manager -p ${STAGING_DIR} -c ${DEPLOY_DIR_PSTAGE}/stamp-cache-staging -u -d ${PSTAGE_TMPDIR_STAGE}/staging
- stage-manager -p ${CROSS_DIR} -c ${DEPLOY_DIR_PSTAGE}/stamp-cache-cross -u -d ${PSTAGE_TMPDIR_STAGE}/cross
+ exitcode=$?
+ if [ "$exitcode" != "5" -a "$exitcode" != "0" ]; then
+ exit $exitcode
+ fi
+ stage-manager -p ${CROSS_DIR} -c ${DEPLOY_DIR_PSTAGE}/stamp-cache-cross -u -d ${PSTAGE_TMPDIR_STAGE}/cross/${BASE_PACKAGE_ARCH}
+ if [ "$exitcode" != "5" -a "$exitcode" != "0" ]; then
+ exit $exitcode
+ fi
set -e
fi
}
-do_populate_staging[lockfiles] = "${STAGING_DIR}/staging.lock"
+packagedstaging_fastpath () {
+ if [ "$PSTAGING_ACTIVE" = "1" ]; then
+ mkdir -p ${PSTAGE_TMPDIR_STAGE}/staging/
+ mkdir -p ${PSTAGE_TMPDIR_STAGE}/cross/
+ cp -fpPR ${SYSROOT_DESTDIR}${STAGING_DIR}/* ${PSTAGE_TMPDIR_STAGE}/staging/ || /bin/true
+ cp -fpPR ${SYSROOT_DESTDIR}${CROSS_DIR}/* ${PSTAGE_TMPDIR_STAGE}/cross/ || /bin/true
+ fi
+}
+
do_populate_staging[dirs] =+ "${DEPLOY_DIR_PSTAGE}"
-python do_populate_staging_prepend() {
+python populate_staging_prehook() {
bb.build.exec_func("populate_staging_preamble", d)
}
-python do_populate_staging_append() {
+python populate_staging_posthook() {
bb.build.exec_func("populate_staging_postamble", d)
}
staging_packager () {
mkdir -p ${PSTAGE_TMPDIR_STAGE}/CONTROL
+ mkdir -p ${DEPLOY_DIR_PSTAGE}/${PSTAGE_PKGPATH}
- echo "Package: staging-${PN}" > ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
- echo "Version: ${PV}-${PR}" >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
+ echo "Package: ${PSTAGE_PKGPN}" > ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
+ echo "Version: ${PSTAGE_PKGVERSION}" >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
echo "Description: ${DESCRIPTION}" >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
echo "Section: ${SECTION}" >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
echo "Priority: Optional" >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
echo "Maintainer: ${MAINTAINER}" >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
- echo "Architecture: ${MULTIMACH_ARCH}" >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
- echo "Source: ${SRC_URI}" >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
+ echo "Architecture: ${PSTAGE_PKGARCH}" >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
+
+ # Protect against empty SRC_URI
+ if [ "${SRC_URI}" != "" ] ; then
+ echo "Source: ${SRC_URI}" >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
+ else
+ echo "Source: OpenEmbedded" >> ${PSTAGE_TMPDIR_STAGE}/CONTROL/control
+ fi
+
+ ${PSTAGE_BUILD_CMD} ${PSTAGE_TMPDIR_STAGE} ${DEPLOY_DIR_PSTAGE}/${PSTAGE_PKGPATH}
+}
+
+staging_package_installer () {
+ #${PSTAGE_INSTALL_CMD} ${PSTAGE_PKG}
+
+ STATUSFILE=${TMPDIR}${libdir_native}/opkg/status
+ echo "Package: ${PSTAGE_PKGPN}" >> $STATUSFILE
+ echo "Version: ${PSTAGE_PKGVERSION}" >> $STATUSFILE
+ echo "Status: install user installed" >> $STATUSFILE
+ echo "Architecture: ${PSTAGE_PKGARCH}" >> $STATUSFILE
+ echo "" >> $STATUSFILE
+
+ CTRLFILE=${TMPDIR}${libdir_native}/opkg/info/${PSTAGE_PKGPN}.control
+ echo "Package: ${PSTAGE_PKGPN}" > $CTRLFILE
+ echo "Version: ${PSTAGE_PKGVERSION}" >> $CTRLFILE
+ echo "Architecture: ${PSTAGE_PKGARCH}" >> $CTRLFILE
- ${PSTAGE_BUILD_CMD} ${PSTAGE_TMPDIR_STAGE} ${DEPLOY_DIR_PSTAGE}
- ${PSTAGE_INSTALL_CMD} ${DEPLOY_DIR_PSTAGE}/${PSTAGE_PKGNAME}
+ cd ${PSTAGE_TMPDIR_STAGE}
+ find -type f | grep -v ./CONTROL | sed -e 's/^\.//' > ${TMPDIR}${libdir_native}/opkg/info/${PSTAGE_PKGPN}.list
}
python do_package_stage () {
- if bb.data.getVar("PSTAGING_DISABLED", d, 1) == "1":
+ if bb.data.getVar("PSTAGING_ACTIVE", d, 1) != "1":
return
+ #
+ # Handle deploy/ packages
+ #
bb.build.exec_func("read_subpackage_metadata", d)
+ stagepath = bb.data.getVar("PSTAGE_TMPDIR_STAGE", d, 1)
+ tmpdir = bb.data.getVar("TMPDIR", d, True)
packages = (bb.data.getVar('PACKAGES', d, 1) or "").split()
if len(packages) > 0:
- stagepath = bb.data.getVar("PSTAGE_TMPDIR_STAGE", d, 1)
if bb.data.inherits_class('package_ipk', d):
- ipkpath = os.path.join(stagepath, "deploy", "ipk")
- bb.mkdirhier(ipkpath)
+ ipkpath = bb.data.getVar('DEPLOY_DIR_IPK', d, True).replace(tmpdir, stagepath)
if bb.data.inherits_class('package_deb', d):
- debpath = os.path.join(stagepath, "deploy", "deb")
- bb.mkdirhier(debpath)
+ debpath = bb.data.getVar('DEPLOY_DIR_DEB', d, True).replace(tmpdir, stagepath)
+ if bb.data.inherits_class('package_rpm', d):
+ rpmpath = bb.data.getVar('DEPLOY_DIR_RPM', d, True).replace(tmpdir, stagepath)
for pkg in packages:
pkgname = bb.data.getVar('PKG_%s' % pkg, d, 1)
arch = bb.data.getVar('PACKAGE_ARCH_%s' % pkg, d, 1)
if not arch:
arch = bb.data.getVar('PACKAGE_ARCH', d, 1)
+ pr = bb.data.getVar('PR_%s' % pkg, d, 1)
+ if not pr:
+ pr = bb.data.getVar('PR', d, 1)
if not packaged(pkg, d):
continue
if bb.data.inherits_class('package_ipk', d):
- srcname = bb.data.expand(pkgname + "_${PV}-${PR}_" + arch + ".ipk", d)
+ srcname = bb.data.expand(pkgname + "_${PV}-" + pr + "${DISTRO_PR}" + "_" + arch + ".ipk", d)
srcfile = bb.data.expand("${DEPLOY_DIR_IPK}/" + arch + "/" + srcname, d)
- if not os.path.exists(srcfile):
- bb.fatal("Package %s does not exist yet it should" % srcfile)
- bb.copyfile(srcfile, ipkpath + "/" + srcname)
+ if os.path.exists(srcfile):
+ destpath = ipkpath + "/" + arch + "/"
+ bb.mkdirhier(destpath)
+ bb.copyfile(srcfile, destpath + srcname)
+
if bb.data.inherits_class('package_deb', d):
if arch == 'all':
- srcname = bb.data.expand(pkgname + "_${PV}-${PR}_all.deb", d)
+ srcname = bb.data.expand(pkgname + "_${PV}-" + pr + "${DISTRO_PR}" + "_all.deb", d)
else:
- srcname = bb.data.expand(pkgname + "_${PV}-${PR}_${DPKG_ARCH}.deb", d)
+ srcname = bb.data.expand(pkgname + "_${PV}-" + pr + "${DISTRO_PR}" + "_${DPKG_ARCH}.deb", d)
srcfile = bb.data.expand("${DEPLOY_DIR_DEB}/" + arch + "/" + srcname, d)
- if not os.path.exists(srcfile):
- bb.fatal("Package %s does not exist yet it should" % srcfile)
- bb.copyfile(srcfile, debpath + "/" + srcname)
+ if os.path.exists(srcfile):
+ destpath = debpath + "/" + arch + "/"
+ bb.mkdirhier(destpath)
+ bb.copyfile(srcfile, destpath + srcname)
+
+ if bb.data.inherits_class('package_rpm', d):
+ version = bb.data.getVar('PV', d, 1)
+ version = version.replace('-', '+')
+ bb.data.setVar('RPMPV', version, d)
+ srcname = bb.data.expand(pkgname + "-${RPMPV}-" + pr + "${DISTRO_PR}" + ".${TARGET_ARCH}.rpm", d)
+ srcfile = bb.data.expand("${DEPLOY_DIR_RPM}/" + arch + "/" + srcname, d)
+ if os.path.exists(srcfile):
+ destpath = rpmpath + "/" + arch + "/"
+ bb.mkdirhier(destpath)
+ bb.copyfile(srcfile, destpath + srcname)
+
+
+ #
+ # Handle stamps/ files
+ #
+ stampfn = bb.data.getVar("STAMP", d, True)
+ destdir = os.path.dirname(stampfn.replace(tmpdir, stagepath))
+ bb.mkdirhier(destdir)
+ # We need to include the package_stage stamp in the staging package so create one
+ bb.build.make_stamp("do_package_stage", d)
+ os.system("cp -dpR %s.do_* %s/" % (stampfn, destdir))
+
+ pstage_set_pkgmanager(d)
bb.build.exec_func("staging_helper", d)
- lf = bb.utils.lockfile(bb.data.expand("${STAGING_DIR}/staging.lock", d))
bb.build.exec_func("staging_packager", d)
+ lf = bb.utils.lockfile(bb.data.expand("${SYSROOT_LOCK}", d))
+ bb.build.exec_func("staging_package_installer", d)
bb.utils.unlockfile(lf)
}
-addtask package_stage after do_package_write_ipk do_package_write_deb do_package_write do_populate_staging before do_build
+#
+# Note an assumption here is that do_deploy runs before do_package_write/do_populate_staging
+#
+addtask package_stage after do_package_write do_populate_staging before do_build
+do_package_stage_all () {
+ :
+}
+do_package_stage_all[recrdeptask] = "do_package_stage"
+addtask package_stage_all after do_package_stage before do_build
projects / vuplus_openembedded / blobdiff