[hostap-daemon] update to 1.0

diff --git a/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon-0.7.3/defconfig b/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon-0.7.3/defconfig
deleted file mode 100644 (file)
index 1f3c6f4..0000000
--- a/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon-0.7.3/defconfig
+++ /dev/null
@@ -1,145 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
-# Driver interface for Prism54 driver
-CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-CONFIG_LIBNL20=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Integrated EAP server
-CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP server
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
-CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y

diff --git a/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon-0.7.3/init b/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon-0.7.3/init
deleted file mode 100644 (file)
index 79f74b6..0000000
--- a/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon-0.7.3/init
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-DAEMON=/usr/sbin/hostapd
-NAME=hostapd
-DESC="HOSTAP Daemon"
-ARGS="/etc/hostapd.conf -B"
-
-test -f $DAEMON || exit 0
-
-set -e
-
-case "$1" in
-    start)
-       echo -n "Starting $DESC: "
-       start-stop-daemon -S -x $DAEMON -- $ARGS
-       echo "$NAME."
-       ;;
-    stop)
-       echo -n "Stopping $DESC: "
-       start-stop-daemon -K -x $DAEMON
-       echo "$NAME."
-       ;;
-    restart)
-       $0 stop
-       $0 start
-       ;;
-    reload)
-       echo -n "Reloading $DESC: "
-       killall -HUP $(basename ${DAEMON})
-       echo "$NAME."
-       ;;
-    *)
-       echo "Usage: $0 {start|stop|restart|reload}"
-       exit 1
-       ;;
-esac
-
-exit 0

diff --git a/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon-0.7.inc b/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon-0.7.inc
deleted file mode 100644 (file)
index 0eb678a..0000000
--- a/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon-0.7.inc
+++ /dev/null
@@ -1,25 +0,0 @@
-HOMEPAGE = "http://hostap.epitest.fi"
-SECTION = "kernel/userland"
-PRIORITY = "optional"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://${WORKDIR}/hostapd-0.7.3/COPYING;md5=c54ce9345727175ff66d17b67ff51f58"
-DEPENDS = "libnl openssl"
-
-inherit update-rc.d
-INITSCRIPT_NAME="hostapd"
-
-do_configure() {
-       install -m 0644 ${WORKDIR}/defconfig ${S}/.config
-}
-
-do_compile() {
-       make
-}
-
-do_install() {
-       install -d ${D}${sbindir} ${D}${sysconfdir}/init.d
-       install -m 0755 ${S}/hostapd ${D}${sbindir}
-       install -m 0755 ${S}/hostapd_cli ${D}${sbindir}
-       install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/hostapd
-}
-

diff --git a/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon_0.7.3.bb b/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon_0.7.3.bb
deleted file mode 100644 (file)
index 99297a9..0000000
--- a/meta-openvuplus/recipes-connectivity/hostap/hostap-daemon_0.7.3.bb
+++ /dev/null
@@ -1,17 +0,0 @@
-DESCRIPTION = "User space daemon for extended IEEE 802.11 management"
-
-require hostap-daemon-0.7.inc
-
-PR = "r4"
-
-DEFAULT_PREFERENCE = "-1"
-
-SRC_URI = "http://hostap.epitest.fi/releases/hostapd-${PV}.tar.gz \
-       file://defconfig \
-       file://init"
-SRC_URI[md5sum] = "91a7c8d0f090b7104152d3455a84c112"
-SRC_URI[sha256sum] = "31eb2781f37e1a4c27969d1594f8019c0ca87779349c099ab812833289961567"
-
-S = "${WORKDIR}/hostapd-${PV}/hostapd"
-
-