def InitSecParams():
config.sec = ConfigSubsection()
- x = ConfigInteger(default=15, limits = (0, 999))
+ x = ConfigInteger(default=15, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_CONT_TONE, configElement.value))
config.sec.delay_after_continuous_tone_change = x
- x = ConfigInteger(default=10, limits = (0, 999))
+ x = ConfigInteger(default=10, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_FINAL_VOLTAGE_CHANGE, configElement.value))
config.sec.delay_after_final_voltage_change = x
- x = ConfigInteger(default=120, limits = (0, 999))
+ x = ConfigInteger(default=120, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_BETWEEN_DISEQC_REPEATS, configElement.value))
config.sec.delay_between_diseqc_repeats = x
- x = ConfigInteger(default=50, limits = (0, 999))
+ x = ConfigInteger(default=50, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_LAST_DISEQC_CMD, configElement.value))
config.sec.delay_after_last_diseqc_command = x
- x = ConfigInteger(default=50, limits = (0, 999))
+ x = ConfigInteger(default=50, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_TONEBURST, configElement.value))
config.sec.delay_after_toneburst = x
- x = ConfigInteger(default=120, limits = (0, 999))
+ x = ConfigInteger(default=120, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS, configElement.value))
config.sec.delay_after_enable_voltage_before_switch_command = x
- x = ConfigInteger(default=700, limits = (0, 999))
+ x = ConfigInteger(default=700, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_BETWEEN_SWITCH_AND_MOTOR_CMD, configElement.value))
config.sec.delay_between_switch_and_motor_command = x
- x = ConfigInteger(default=150, limits = (0, 999))
+ x = ConfigInteger(default=150, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER, configElement.value))
config.sec.delay_after_voltage_change_before_measure_idle_inputpower = x
- x = ConfigInteger(default=750, limits = (0, 999))
+ x = ConfigInteger(default=750, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_MOTOR_CMD, configElement.value))
config.sec.delay_after_enable_voltage_before_motor_command = x
- x = ConfigInteger(default=150, limits = (0, 999))
+ x = ConfigInteger(default=150, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_MOTOR_STOP_CMD, configElement.value))
config.sec.delay_after_motor_stop_command = x
- x = ConfigInteger(default=150, limits = (0, 999))
+ x = ConfigInteger(default=150, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD, configElement.value))
config.sec.delay_after_voltage_change_before_motor_command = x
- x = ConfigInteger(default=120, limits = (0, 999))
+ x = ConfigInteger(default=120, limits = (0, 9999))
x.addNotifier(lambda configElement: secClass.setParam(secClass.MOTOR_RUNNING_TIMEOUT, configElement.value))
config.sec.motor_running_timeout = x
config.Nims = ConfigSubList()
for x in range(nimmgr.nimCount):
config.Nims.append(ConfigSubsection())
-
+
# def nimConfigModeChanged(slotid, configElement):
# nimmgr.nimConfigModeChanged(slotid, configElement.value)
def nimDiseqcModeChanged(slotid, configElement):
nimmgr.nimDiseqcModeChanged(slotid, configElement.value)
-
+
def nimPortAChanged(slotid, configElement):
nimmgr.nimPortAChanged(slotid, configElement.value)
def nimPortBChanged(slotid, configElement):
x = slot.slotid
cname = nimmgr.getConfigPrefix(x)
nim = config.Nims[x]
-
+
if slot.nimType == nimmgr.nimType["DVB-S"]:
if slot.slotid == 0:
nim.configMode = ConfigSelection(
nim.equalTo = ConfigSelection(choices = satNimListNames)
nim.linkedTo = ConfigSelection(choices = satNimListNames)
nim.satposDependsTo = ConfigSelection(choices = satNimListNames)
-
+
#perhaps the instance of the slot is more useful?
# nim.configMode.addNotifier(boundFunction(nimConfigModeChanged,x))
nim.diseqcMode.addNotifier(boundFunction(nimDiseqcModeChanged,x))
nim.diseqcB.addNotifier(boundFunction(nimPortBChanged,x))
nim.diseqcC.addNotifier(boundFunction(nimPortCChanged,x))
nim.diseqcD.addNotifier(boundFunction(nimPortDChanged,x))
-
+
# advanced config:
nim.advanced = ConfigSubsection()
nim.advanced.sats = getConfigSatlist(192,nimmgr.satList)
csw = [("none", _("None")), ("AA", _("AA")), ("AB", _("AB")), ("BA", _("BA")), ("BB", _("BB"))]
for y in range(0, 16):
csw.append((str(0xF0|y), "Input " + str(y+1)))
-
+
ucsw = [("0", _("None"))]
for y in range(1, 17):
ucsw.append((str(y), "Input " + str(y)))
-
+
nim.advanced.lnb = ConfigSubList()
nim.advanced.lnb.append(ConfigNothing())
for x in range(1, 33):
nim.advanced.lnb[x].sequenceRepeat = ConfigYesNo(default=False)
nim.advanced.lnb[x].commandOrder1_0 = ConfigSelection(choices = [("ct", "committed, toneburst"), ("tc", "toneburst, committed")], default = "ct")
nim.advanced.lnb[x].commandOrder = ConfigSelection(choices = [
- ("ct", "committed, toneburst"),
- ("tc", "toneburst, committed"),
- ("cut", "committed, uncommitted, toneburst"),
- ("tcu", "toneburst, committed, uncommitted"),
- ("uct", "uncommitted, committed, toneburst"),
+ ("ct", "committed, toneburst"),
+ ("tc", "toneburst, committed"),
+ ("cut", "committed, uncommitted, toneburst"),
+ ("tcu", "toneburst, committed, uncommitted"),
+ ("uct", "uncommitted, committed, toneburst"),
("tuc", "toneburst, uncommitted, commmitted")],
default="ct")
nim.advanced.lnb[x].uncommittedDiseqcCommand = ConfigSelection(choices = ucsw)