<item level="2" text="Fast Forward speeds">config.seek.speeds_forward</item>
<item level="2" text="Rewind speeds">config.seek.speeds_backward</item>
<item level="2" text="Slow Motion speeds">config.seek.speeds_slowmotion</item>
-<!-- TRANSLATORS: Note that "Enter" in the two strings below should *not*
- be interpreted as "Give speed as input". The intended meaning is
- instead "Initial speed when starting winding", i.e. the speed at
- which "winding mode" is entered when first pressing "rewind" or
- "fast forward". -->
- <item level="2" text="Enter Fast Forward at speed">config.seek.enter_forward</item>
- <item level="2" text="Enter Rewind at speed">config.seek.enter_backward</item>
-<!-- TRANSLATORS: The effect of "Non-smooth winding" is that rather
- than using ordinary "continuous" or "smooth" winding, a fast
- sequence of stills is shown when winding at high speeds. This
- makes it much easier too follow when almost each frame comes from
- a new scene. The effect is achieved by repeating each shown frame
- a couple of times. The settings control both at which speed this
- winding mode sets in, and how many times each frame should be
- repeated. This was previously called "Discontinuous playback"
- which was incomprehensible. "Non-smooth winding" may be a better
- term, but note that there is nothing irregular about it. Synonyms
- better suited for translation to other languages may be "stepwise
- winding/playback", or "winding/playback using stills". -->
- <item level="2" text="Use non-smooth winding at speeds above">config.seek.stepwise_minspeed</item>
- <item level="2" text="Frame repeat count during non-smooth winding">config.seek.stepwise_repeat</item>
+<!-- TRANSLATORS: The following is the speed you get on the first press on fast-forward.
+ It was previously called "enter fast forward at speed" which was easily misunderstood. -->
+ <item level="2" text="Initial Fast Forward speed">config.seek.enter_forward</item>
+ <item level="2" text="Initial Rewind speed">config.seek.enter_backward</item>
<item level="2" text="Behavior of 'pause' when paused">config.seek.on_pause</item>
<item level="2" text="Behavior of 0 key in PiP-mode">config.usage.pip_zero_button</item>
<item level="2" text="Alternative services tuner priority">config.usage.alternatives_priority</item>
pts_t current = i->second - currentDelta;
pts_t diff = current - lastpts_t;
- if (llabs(diff) > (90000*5)) // 5sec diff
+ if (llabs(diff) > (90000*10)) // 10sec diff
{
// eDebug("%llx < %llx, have discont. new timestamp is %llx (diff is %llx)!", current, lastpts_t, i->second, diff);
currentDelta = i->second - lastpts_t; /* FIXME: should be the extrapolated new timestamp, based on the current rate */
else if (direction == +1)
direction = 0;
}
- /* let's find the next frame after the given offset */
off_t start = offset;
+#if 0
+ /* backtrack to find the previous sequence start, in case of MPEG2 */
+ if ((data & 0xFF) == 0x00) {
+ do {
+ --start;
+ if (m_streaminfo.getStructureEntry(start, data, 0))
+ {
+ eDebug("get previous failed");
+ return -1;
+ }
+ } while (((data & 0xFF) != 9) && ((data & 0xFF) != 0x00) && ((data & 0xFF) != 0xB3)); /* sequence start or previous frame */
+ if ((data & 0xFF) != 0xB3)
+ start = offset; /* Failed to find corresponding sequence start, so never mind */
+ }
+
+#endif
+
+ /* let's find the next frame after the given offset */
do {
if (m_streaminfo.getStructureEntry(offset, data, 1))
{
// eDebug("%08llx@%llx (next)", data, offset);
} while (((data & 0xFF) != 9) && ((data & 0xFF) != 0x00)); /* next frame */
+#if 0
/* align to TS pkt start */
-// start = start - (start % 188);
-// offset = offset - (offset % 188);
+ start = start - (start % 188);
+ offset = offset - (offset % 188);
+#endif
len = offset - start;
_offset = start;
// painter.fill(eRect(0, 10, s.width(), s.height()-20));
pts_t in = 0, out = 0;
+ int xm, xm_last = -1;
std::multiset<cueEntry>::iterator i(m_cue_entries.begin());
continue;
} else if (i->what == 1) /* out */
out = i++->where;
- else if (i->what == 2) /* mark */
+ else /* mark or last */
{
- int xm = scale(i->where);
- painter.setForegroundColor(gRGB(0xFF8080));
- painter.fill(eRect(xm - 2, 0, 4, s.height()));
+ xm = scale(i->where);
+ if (i->what == 2) {
+ painter.setForegroundColor(gRGB(0xFF8080));
+ if (xm - 2 < xm_last) /* Make sure last is not overdrawn */
+ painter.fill(eRect(xm_last, 0, 2 + xm - xm_last, s.height()));
+ else
+ painter.fill(eRect(xm - 2, 0, 4, s.height()));
+ } else if (i->what == 3) {
+ painter.setForegroundColor(gRGB(0x80FF80));
+ painter.fill(eRect(xm - 1, 0, 3, s.height()));
+ xm_last = xm + 2;
+ }
i++;
continue;
- } else /* other marker, like last position */
- {
- ++i;
- continue;
}
}
config.seek.selfdefined_79 = ConfigNumber(default=300)
config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
- config.seek.speeds_backward = ConfigSet(default=[8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
+ config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25])
config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
- config.seek.stepwise_minspeed = ConfigSelection(default = "16", choices = ["Never", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
- config.seek.stepwise_repeat = ConfigSelection(default = "3", choices = ["2", "3", "4", "5", "6"])
config.seek.on_pause = ConfigSelection(default = "play", choices = [
("play", _("Play")),
self.saved_config_speeds_backward = config.seek.speeds_backward.value
self.saved_config_enter_forward = config.seek.enter_forward.value
self.saved_config_enter_backward = config.seek.enter_backward.value
- self.saved_config_seek_stepwise_minspeed = config.seek.stepwise_minspeed.value
- self.saved_config_seek_stepwise_repeat = config.seek.stepwise_repeat.value
self.saved_config_seek_on_pause = config.seek.on_pause.value
self.saved_config_seek_speeds_slowmotion = config.seek.speeds_slowmotion.value
config.seek.speeds_slowmotion.value = [ ]
config.seek.enter_forward.value = "2"
config.seek.enter_backward.value = "2"
- config.seek.stepwise_minspeed.value = "Never"
- config.seek.stepwise_repeat.value = "3"
config.seek.on_pause.value = "play"
def restore_infobar_seek_config(self):
config.seek.speeds_slowmotion.value = self.saved_config_seek_speeds_slowmotion
config.seek.enter_forward.value = self.saved_config_enter_forward
config.seek.enter_backward.value = self.saved_config_enter_backward
- config.seek.stepwise_minspeed.value = self.saved_config_seek_stepwise_minspeed
- config.seek.stepwise_repeat.value = self.saved_config_seek_stepwise_repeat
config.seek.on_pause.value = self.saved_config_seek_on_pause
def __init__(self, session, dvd_device = None, dvd_filelist = [ ], args = None):
HelpableScreen.__init__(self)
self.save_infobar_seek_config()
self.change_infobar_seek_config()
- InfoBarSeek.__init__(self, useSeekBackHack=False)
+ InfoBarSeek.__init__(self)
InfoBarPVRState.__init__(self)
self.dvdScreen = self.session.instantiateDialog(DVDOverlay)
SEEK_STATE_PAUSE = (1, 0, 0, "||")
SEEK_STATE_EOF = (1, 0, 0, "END")
- def __init__(self, actionmap = "InfobarSeekActions", useSeekBackHack=True):
+ def __init__(self, actionmap = "InfobarSeekActions"):
self.__event_tracker = ServiceEventTracker(screen=self, eventmap=
{
iPlayableService.evSeekableStatusChanged: self.__seekableStatusChanged,
self.__seekableStatusChanged()
def makeStateForward(self, n):
-# minspeed = config.seek.stepwise_minspeed.value
-# repeat = int(config.seek.stepwise_repeat.value)
-# if minspeed != "Never" and n >= int(minspeed) and repeat > 1:
-# return (0, n * repeat, repeat, ">> %dx" % n)
-# else:
- return (0, n, 0, ">> %dx" % n)
+ return (0, n, 0, ">> %dx" % n)
def makeStateBackward(self, n):
-# minspeed = config.seek.stepwise_minspeed.value
-# repeat = int(config.seek.stepwise_repeat.value)
-# if minspeed != "Never" and n >= int(minspeed) and repeat > 1:
-# return (0, -n * repeat, repeat, "<< %dx" % n)
-# else:
- return (0, -n, 0, "<< %dx" % n)
+ return (0, -n, 0, "<< %dx" % n)
def makeStateSlowMotion(self, n):
return (0, 0, n, "/%d" % n)
return True
def jumpPreviousMark(self):
- # we add 2 seconds, so if the play position is <2s after
+ # we add 5 seconds, so if the play position is <5s after
# the mark, the mark before will be used
self.jumpPreviousNextMark(lambda x: -x-5*90000, start=True)
def jumpNextMark(self):
- if not self.jumpPreviousNextMark(lambda x: x):
+ if not self.jumpPreviousNextMark(lambda x: x-90000):
self.doSeek(-1)
def getNearestCutPoint(self, pts, cmp=abs, start=False):
# can be optimized
- beforecut = False
+ beforecut = True
nearest = None
+ bestdiff = -1
+ instate = True
if start:
- beforecut = True
bestdiff = cmp(0 - pts)
if bestdiff >= 0:
nearest = [0, False]
beforecut = False
if cp[1] == self.CUT_TYPE_IN: # Start is here, disregard previous marks
diff = cmp(cp[0] - pts)
- if diff >= 0:
+ if start and diff >= 0:
nearest = cp
bestdiff = diff
else:
nearest = None
- if cp[1] in (self.CUT_TYPE_MARK, self.CUT_TYPE_LAST):
+ bestdiff = -1
+ if cp[1] == self.CUT_TYPE_IN:
+ instate = True
+ elif cp[1] == self.CUT_TYPE_OUT:
+ instate = False
+ elif cp[1] in (self.CUT_TYPE_MARK, self.CUT_TYPE_LAST):
diff = cmp(cp[0] - pts)
- if diff >= 0 and (nearest is None or bestdiff > diff):
+ if instate and diff >= 0 and (nearest is None or bestdiff > diff):
nearest = cp
bestdiff = diff
return nearest
projects / vuplus_dvbapp / commitdiff