from Screens.WizardLanguage import WizardLanguage
from Screens.Rc import Rc
from Screens.MessageBox import MessageBox
-
from Components.Pixmap import Pixmap, MovingPixmap, MultiPixmap
from Components.Sources.Boolean import Boolean
from Components.config import config, ConfigBoolean, configfile, ConfigYesNo, NoSave, ConfigSubsection, ConfigText, getConfigListEntry, ConfigSelection, ConfigPassword
from Components.Network import iNetwork
-
from Tools.Directories import resolveFilename, SCOPE_PLUGINS, SCOPE_SKIN_IMAGE
+from enigma import eTimer
config.misc.firstrun = ConfigBoolean(default = True)
self["HelpWindow"].hide()
self["VKeyIcon"] = Boolean(False)
+ self.InstalledInterfaceCount = None
+ self.Adapterlist = None
self.InterfaceState = None
self.isInterfaceUp = None
self.WlanPluginInstalled = None
self.ap = None
self.selectedInterface = None
self.NextStep = None
- self.myref = None
+ self.resetRef = None
self.checkRef = None
self.AdapterRef = None
+ self.APList = None
+ self.newAPlist = None
self.WlanList = None
+ self.oldlist = None
+ self.originalAth0State = None
+ self.originalEth0State = None
+ self.originalWlan0State = None
+ self.originalInterfaceStateChanged = False
+ self.Text = None
+ self.rescanTimer = eTimer()
+ self.rescanTimer.callback.append(self.rescanTimerFired)
+ self.getInstalledInterfaceCount()
self.isWlanPluginInstalled()
+
+ def exitWizardQuestion(self, ret = False):
+ if (ret):
+ self.markDone()
+ self.close()
+
+ def markDone(self):
+ self.rescanTimer.stop()
+ del self.rescanTimer
+ pass
+
+ def getInstalledInterfaceCount(self):
+ self.rescanTimer.stop()
+ self.Adapterlist = iNetwork.getAdapterList()
+ self.InstalledInterfaceCount = len(self.Adapterlist)
+ self.originalAth0State = iNetwork.getAdapterAttribute('ath0', 'up')
+ self.originalEth0State = iNetwork.getAdapterAttribute('eth0', 'up')
+ self.originalWlan0State = iNetwork.getAdapterAttribute('wlan0', 'up')
+
+ def checkOldInterfaceState(self):
+ # disable up interface if it was originally down and config is unchanged.
+ if self.originalAth0State is False and self.originalInterfaceStateChanged is False:
+ if iNetwork.checkforInterface('ath0') is True:
+ iNetwork.deactivateInterface('ath0')
+ if self.originalEth0State is False and self.originalInterfaceStateChanged is False:
+ if iNetwork.checkforInterface('eth0') is True:
+ iNetwork.deactivateInterface('eth0')
+ if self.originalWlan0State is False and self.originalInterfaceStateChanged is False:
+ if iNetwork.checkforInterface('wlan0') is True:
+ iNetwork.deactivateInterface('wlan0')
def listInterfaces(self):
+ self.rescanTimer.stop()
+ self.checkOldInterfaceState()
list = [(iNetwork.getFriendlyAdapterName(x),x) for x in iNetwork.getAdapterList()]
list.append((_("Exit network wizard"), "end"))
return list
self.InterfaceSelect(self.selection)
def checkInterface(self,iface):
- self.Adapterlist = iNetwork.getAdapterList()
+ self.rescanTimer.stop()
+ if self.Adapterlist is None:
+ self.Adapterlist = iNetwork.getAdapterList()
if self.NextStep is not 'end':
if len(self.Adapterlist) == 0:
#Reset Network to defaults if network broken
- iNetwork.resetNetworkConfig('lan', self.checkInterfaceCB)
- self.myref = self.session.openWithCallback(self.resetfinishedCB, MessageBox, _("Please wait while we prepare your network interfaces..."), type = MessageBox.TYPE_INFO, enable_input = False)
- if iface == 'eth0':
- if iface in iNetwork.configuredNetworkAdapters and len(iNetwork.configuredNetworkAdapters) == 1:
- if iNetwork.getAdapterAttribute(iface, 'up') is True:
- self.isInterfaceUp = True
- else:
- self.isInterfaceUp = False
- self.resetfinishedCB(False)
- else:
- iNetwork.resetNetworkConfig('lan',self.checkInterfaceCB)
- self.myref = self.session.openWithCallback(self.resetfinishedCB, MessageBox, _("Please wait while we prepare your network interfaces..."), type = MessageBox.TYPE_INFO, enable_input = False)
- elif iface == 'wlan0':
+ iNetwork.resetNetworkConfig('lan', self.resetNetworkConfigCB)
+ self.resetRef = self.session.openWithCallback(self.resetNetworkConfigFinished, MessageBox, _("Please wait while we prepare your network interfaces..."), type = MessageBox.TYPE_INFO, enable_input = False)
+ if iface in ('eth0', 'wlan0', 'ath0'):
if iface in iNetwork.configuredNetworkAdapters and len(iNetwork.configuredNetworkAdapters) == 1:
if iNetwork.getAdapterAttribute(iface, 'up') is True:
self.isInterfaceUp = True
else:
self.isInterfaceUp = False
- self.resetfinishedCB(False)
+ self.currStep = self.getStepWithID(self.NextStep)
+ self.afterAsyncCode()
else:
- iNetwork.resetNetworkConfig('wlan',self.checkInterfaceCB)
- self.myref = self.session.openWithCallback(self.resetfinishedCB, MessageBox, _("Please wait while we prepare your network interfaces..."), type = MessageBox.TYPE_INFO, enable_input = False)
- elif iface == 'ath0':
- if iface in iNetwork.configuredNetworkAdapters and len(iNetwork.configuredNetworkAdapters) == 1:
- if iNetwork.getAdapterAttribute(iface, 'up') is True:
- self.isInterfaceUp = True
- else:
- self.isInterfaceUp = False
- self.resetfinishedCB(False)
- else:
- iNetwork.resetNetworkConfig('wlan-mpci',self.checkInterfaceCB)
- self.myref = self.session.openWithCallback(self.resetfinishedCB, MessageBox, _("Please wait while we prepare your network interfaces..."), type = MessageBox.TYPE_INFO, enable_input = False)
+ self.isInterfaceUp = iNetwork.checkforInterface(iface)
+ self.currStep = self.getStepWithID(self.NextStep)
+ self.afterAsyncCode()
else:
- self.resetfinishedCB(False)
+ self.resetNetworkConfigFinished(False)
- def resetfinishedCB(self,data):
+ def resetNetworkConfigFinished(self,data):
if data is True:
self.currStep = self.getStepWithID(self.NextStep)
self.afterAsyncCode()
self.currStep = self.getStepWithID(self.NextStep)
self.afterAsyncCode()
- def checkInterfaceCB(self,callback,iface):
+ def resetNetworkConfigCB(self,callback,iface):
if callback is not None:
if callback is True:
- iNetwork.getInterfaces(self.getInterfacesDataAvail)
+ iNetwork.getInterfaces(self.getInterfacesFinished)
-
- def getInterfacesDataAvail(self, data):
+ def getInterfacesFinished(self, data):
if data is True:
if iNetwork.getAdapterAttribute(self.selectedInterface, 'up') is True:
self.isInterfaceUp = True
else:
self.isInterfaceUp = False
- self.myref.close(True)
+ self.resetRef.close(True)
+ else:
+ print "we should never come here!"
def AdapterSetupEnd(self, iface):
+ self.originalInterfaceStateChanged = True
if iNetwork.getAdapterAttribute(iface, "dhcp") is True:
iNetwork.checkNetworkState(self.AdapterSetupEndFinished)
self.AdapterRef = self.session.openWithCallback(self.AdapterSetupEndCB, MessageBox, _("Please wait while we test your network..."), type = MessageBox.TYPE_INFO, enable_input = False)
-
else:
self.currStep = self.getStepWithID("confdns")
self.afterAsyncCode()
def AdapterSetupEndCB(self,data):
if data is True:
- self.currStep = self.getStepWithID("checklanstatusend")
- self.afterAsyncCode()
+ if self.selectedInterface in ('wlan0', 'ath0'):
+ if self.WlanPluginInstalled == True:
+ from Plugins.SystemPlugins.WirelessLan.Wlan import iStatus
+ iStatus.getDataForInterface(self.selectedInterface,self.checkWlanStateCB)
+ else:
+ self.currStep = self.getStepWithID("checklanstatusend")
+ self.afterAsyncCode()
+ else:
+ self.currStep = self.getStepWithID("checklanstatusend")
+ self.afterAsyncCode()
def AdapterSetupEndFinished(self,data):
if data <= 2:
self.InterfaceState = False
self.AdapterRef.close(True)
+ def checkWlanStateCB(self,data,status):
+ if data is not None:
+ if data is True:
+ if status is not None:
+ text1 = _("Your Dreambox is now ready to use.\n\nYour internet connection is working now.\n\n")
+ text2 = _('Accesspoint:') + "\t" + status[self.selectedInterface]["acesspoint"] + "\n"
+ text3 = _('SSID:') + "\t" + status[self.selectedInterface]["essid"] + "\n"
+ text4 = _('Link Quality:') + "\t" + status[self.selectedInterface]["quality"]+"%" + "\n"
+ text5 = _('Signal Strength:') + "\t" + status[self.selectedInterface]["signal"] + "\n"
+ text6 = _('Bitrate:') + "\t" + status[self.selectedInterface]["bitrate"] + "\n"
+ text7 = _('Encryption:') + " " + status[self.selectedInterface]["encryption"] + "\n"
+ text8 = _("Please press OK to continue.")
+ infotext = text1 + text2 + text3 + text4 + text5 + text7 +"\n" + text8
+ self.currStep = self.getStepWithID("checkWlanstatusend")
+ self.Text = infotext
+ self.afterAsyncCode()
+
def checkNetwork(self):
- iNetwork.checkNetworkState(self.checkNetworkStateFinished)
+ iNetwork.checkNetworkState(self.checkNetworkStateCB)
self.checkRef = self.session.openWithCallback(self.checkNetworkCB, MessageBox, _("Please wait while we test your network..."), type = MessageBox.TYPE_INFO, enable_input = False)
def checkNetworkCB(self,data):
if data is True:
- self.currStep = self.getStepWithID("checklanstatusend")
- self.afterAsyncCode()
+ if self.selectedInterface in ('wlan0', 'ath0'):
+ if self.WlanPluginInstalled == True:
+ from Plugins.SystemPlugins.WirelessLan.Wlan import iStatus
+ iStatus.getDataForInterface(self.selectedInterface,self.checkWlanStateCB)
+ else:
+ self.currStep = self.getStepWithID("checklanstatusend")
+ self.afterAsyncCode()
+ else:
+ self.currStep = self.getStepWithID("checklanstatusend")
+ self.afterAsyncCode()
- def checkNetworkStateFinished(self,data):
+ def checkNetworkStateCB(self,data):
if data <= 2:
self.InterfaceState = True
else:
self.InterfaceState = False
self.checkRef.close(True)
- def markDone(self):
- pass
+ def rescanTimerFired(self):
+ self.rescanTimer.stop()
+ self.updateAPList()
- def listModes(self):
- list = []
- self.WlanList = []
+ def updateAPList(self):
+ self.oldlist = self.APList
+ self.newAPlist = []
+ newList = []
+ newListIndex = None
+ currentListEntry = None
+ newList = self.listAccessPoints()
+
+ for oldentry in self.oldlist:
+ if oldentry not in newList:
+ newList.append(oldentry)
+
+ for newentry in newList:
+ if newentry[1] == "hidden...":
+ continue
+ self.newAPlist.append(newentry)
+
+ if len(self.newAPlist):
+ if "hidden..." not in self.newAPlist:
+ self.newAPlist.append(( _("enter hidden network SSID"), "hidden..." ))
+
+ if (self.wizard[self.currStep].has_key("dynamiclist")):
+ currentListEntry = self["list"].getCurrent()
+ idx = 0
+ for entry in self.newAPlist:
+ if entry == currentListEntry:
+ newListIndex = idx
+ idx +=1
+ self.wizard[self.currStep]["evaluatedlist"] = self.newAPlist
+ self['list'].setList(self.newAPlist)
+ self["list"].setIndex(newListIndex)
+ self["list"].updateList(self.newAPlist)
+
+ def listAccessPoints(self):
+ self.APList = []
try:
from Plugins.SystemPlugins.WirelessLan.Wlan import Wlan
except ImportError:
- list.append( ( _("No networks found"),_("unavailable") ) )
- self.WlanList.append(_("No networks found"))
- return list
+ self.APList.append( ( _("No networks found"),_("unavailable") ) )
+ return self.APList
else:
self.w = Wlan(self.selectedInterface)
aps = self.w.getNetworkList()
if aps is not None:
print "[NetworkWizard.py] got Accespoints!"
+ tmplist = []
+ complist = []
for ap in aps:
a = aps[ap]
if a['active']:
- if a['essid'] != "":
- #a['essid'] = a['bssid']
- list.append( (a['essid'], a['essid']) )
- self.WlanList.append(a['essid'])
- if "hidden..." not in list:
- list.append( ( _("enter hidden network SSID"),_("hidden...") ) )
- self.WlanList.append(_("hidden..."))
- return list
-
- def modeSelectionMade(self, index):
- self.modeSelect(index)
-
- def modeSelectionMoved(self):
- self.modeSelect(self.selection)
+ tmplist.append( (a['bssid'], a['essid']) )
+ complist.append( (a['bssid'], a['essid']) )
+
+ for entry in tmplist:
+ if entry[1] == "":
+ for compentry in complist:
+ if compentry[0] == entry[0]:
+ complist.remove(compentry)
+ for entry in complist:
+ self.APList.append( (entry[1], entry[1]) )
+
+ if "hidden..." not in self.APList:
+ self.APList.append(( _("enter hidden network SSID"), "hidden..." ))
- def modeSelect(self, mode):
- self.ap = mode
- print "ModeSelected:", mode
+ self.rescanTimer.start(3000)
+ return self.APList
- def restartNetwork(self):
- iNetwork.restartNetwork()
- self.checkNetwork()
-
- def isWlanPluginInstalled(self):
+ def AccessPointsSelectionMade(self, index):
+ self.ap = index
+ self.WlanList = []
+ currList = []
+ if (self.wizard[self.currStep].has_key("dynamiclist")):
+ currList = self['list'].list
+ for entry in currList:
+ self.WlanList.append( (entry[1], entry[0]) )
+ self.AccessPointsSelect(index)
+
+ def AccessPointsSelect(self, index):
+ self.NextStep = 'wlanconfig'
+
+ def AccessPointsSelectionMoved(self):
+ self.AccessPointsSelect(self.selection)
+
+ def checkWlanSelection(self):
+ self.rescanTimer.stop()
+ self.currStep = self.getStepWithID(self.NextStep)
+
+ def isWlanPluginInstalled(self):
try:
from Plugins.SystemPlugins.WirelessLan.Wlan import Wlan
except ImportError:
else:
self.WlanPluginInstalled = True
+
+
<wizard>
- <step id="welcome" nextstep="selectinterface">
- <text value="Welcome.\n\nIf you want to connect your Dreambox to the Internet, this wizard will guide you through the basic network setup of your Dreambox.\n\nPress OK to start configuring your network" />
- <displaytext value="Network Wizard" />
- <code>
+ <step id="welcome" nextstep="selectinterface">
+ <text value="Welcome.\n\nIf you want to connect your Dreambox to the Internet, this wizard will guide you through the basic network setup of your Dreambox.\n\nPress OK to start configuring your network" />
+ <displaytext value="Network Wizard" />
+ <code>
self.clearSelectedKeys()
self.selectKey("OK")
- </code>
- </step>
+ </code>
+ </step>
- <step id="selectinterface">
- <text value="Please select the network interface that you want to use for your internet connection.\n\nPlease press OK to continue." />
- <displaytext value="Select interface" />
- <list type="dynamic" source="listInterfaces" evaluation="InterfaceSelectionMade" onselect="InterfaceSelectionMoved" />
- <code>
+ <step id="selectinterface">
+ <text value="Please select the network interface that you want to use for your internet connection.\n\nPlease press OK to continue." />
+ <displaytext value="Select interface" />
+ <list type="dynamic" source="listInterfaces" evaluation="InterfaceSelectionMade" onselect="InterfaceSelectionMoved" />
+ <code>
self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")
- </code>
- <code pos="after" async="yes">
+ </code>
+ <code pos="after" async="yes">
self.checkInterface(self.selectedInterface)
- </code>
- </step>
-
- <step id="nwconfig">
- <text value="Please configure your internet connection by filling out the required values.\nWhen you are ready press OK to continue." />
- <displaytext value="Configure interface" />
- <config screen="AdapterSetup" module="NetworkSetup" args="self.selectedInterface" type="ConfigList" />
- <code>
+ </code>
+ </step>
+ <step id="nwconfig">
+ <text value="Please configure your internet connection by filling out the required values.\nWhen you are ready press OK to continue." />
+ <displaytext value="Configure interface" />
+ <config screen="AdapterSetup" module="NetworkSetup" args="self.selectedInterface" type="ConfigList" />
+ <code>
self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")
self.selectKey("LEFT")
self.selectKey("RIGHT")
- </code>
- <code pos="after" async="yes">
+ </code>
+ <code pos="after" async="yes">
self.AdapterSetupEnd(self.selectedInterface)
- </code>
- </step>
-
- <step id="confdns" nextstep="checklanstatusend">
- <text value="Please configure or verify your Nameservers by filling out the required values.\nWhen you are ready press OK to continue." />
- <displaytext value="Configure nameservers" />
- <config screen="NameserverSetup" module="NetworkSetup" type="ConfigList" />
- <code>
+ </code>
+ </step>
+ <step id="confdns" nextstep="checklanstatusend">
+ <text value="Please configure or verify your Nameservers by filling out the required values.\nWhen you are ready press OK to continue." />
+ <displaytext value="Configure nameservers" />
+ <config screen="NameserverSetup" module="NetworkSetup" type="ConfigList" />
+ <code>
self.clearSelectedKeys()
self.selectKey("OK")
- </code>
- <code pos="after" async="yes">
+ </code>
+ <code pos="after" async="yes">
self.checkNetwork()
- </code>
- </step>
-
- <step id="checklanstatusend" nextstep="end">
+ </code>
+ </step>
+ <step id="checklanstatusend" nextstep="end">
<condition>
self.condition = (self.InterfaceState == True )
</condition>
- <text value="Your Dreambox is now ready to use.\n\nYour internet connection is working now.\n\nPlease press OK to continue." />
- <displaytext value="Please follow the instructions on the TV" />
- <code>
+ <text value="Your Dreambox is now ready to use.\n\nYour internet connection is working now.\n\nPlease press OK to continue." />
+ <displaytext value="Please follow the instructions on the TV" />
+ <code>
self.clearSelectedKeys()
self.selectKey("OK")
- </code>
- <code pos="after">
-currStep = self.numSteps
+ </code>
+ <code pos="after">
+currStep = self.numSteps
self.wizard[currStep]["nextstep"] = None
self.markDone()
self.close()
- </code>
- </step>
-
- <step id="checklanstatusend">
+ </code>
+ </step>
+ <step id="checklanstatusend">
<condition>
self.condition = (self.InterfaceState == False )
</condition>
- <text value="Your internet connection is not working!\nPlease choose what you want to do next." />
- <displaytext value="Please follow the instructions on the TV" />
- <code>
+ <text value="Your internet connection is not working!\nPlease choose what you want to do next." />
+ <displaytext value="Please follow the instructions on the TV" />
+ <code>
self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")
- </code>
- <list>
- <listentry caption="Configure your network again" step="selectinterface" />
- <listentry caption="Exit network wizard" step="end" />
- </list>
- </step>
-
- <step id="scanwlan" nextstep="wlanconfig">
+ </code>
+ <list>
+ <listentry caption="Configure your network again" step="selectinterface" />
+ <listentry caption="Exit network wizard" step="end" />
+ </list>
+ </step>
+ <step id="scanwlan">
<condition>
self.condition = (self.isInterfaceUp == True and self.WlanPluginInstalled == True)
- </condition>
- <text value="Please select the wireless network that you want to connect to.\n\nPlease press OK to continue." />
- <displaytext value="Select wireless network" />
- <list type="dynamic" source="listModes" evaluation="modeSelectionMade" onselect="modeSelectionMoved" />
- <code>
+ </condition>
+ <text value="Please select the wireless network that you want to connect to.\n\nPlease press OK to continue." />
+ <displaytext value="Select wireless network" />
+ <list type="dynamic" source="listAccessPoints" evaluation="AccessPointsSelectionMade" onselect="AccessPointsSelectionMoved" />
+ <code>
self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")
self.selectKey("LEFT")
self.selectKey("RIGHT")
- </code>
- </step>
-
- <step id="scanwlan">
- <condition>
+ </code>
+ <code pos="after">
+self.checkWlanSelection()
+ </code>
+ </step>
+ <step id="scanwlan">
+ <condition>
self.condition = (self.isInterfaceUp == False and self.WlanPluginInstalled == True)
- </condition>
- <text value="Your wireless LAN internet connection could not be started!\nHave you attached your USB WLAN Stick?\n\nPlease choose what you want to do next." />
- <displaytext value="Please follow the instructions on the TV" />
- <list>
- <listentry caption="Configure your wireless LAN again" step="scanwlan" />
- <listentry caption="Configure your internal LAN" step="selectinterface" />
- <listentry caption="Exit network wizard" step="end" />
- </list>
- <code>
+ </condition>
+ <text value="Your wireless LAN internet connection could not be started!\nHave you attached your USB WLAN Stick?\n\nPlease choose what you want to do next." />
+ <displaytext value="Please follow the instructions on the TV" />
+ <list>
+ <listentry caption="Configure your wireless LAN again" step="scanwlan" />
+ <listentry caption="Configure your internal LAN" step="selectinterface" />
+ <listentry caption="Exit network wizard" step="end" />
+ </list>
+ <code>
self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")
- </code>
- </step>
-
- <step id="scanwlan">
- <condition>
+ </code>
+ </step>
+ <step id="scanwlan">
+ <condition>
self.condition = (self.isInterfaceUp == True and self.WlanPluginInstalled == False)
- </condition>
- <text value="The wireless LAN plugin is not installed!\nPlease install it and choose what you want to do next." />
- <displaytext value="Please follow the instructions on the TV" />
- <list>
- <listentry caption="Configure your internal LAN" step="selectinterface" />
- <listentry caption="Exit network wizard" step="end" />
- </list>
- <code>
+ </condition>
+ <text value="The wireless LAN plugin is not installed!\nPlease install it and choose what you want to do next." />
+ <displaytext value="Please follow the instructions on the TV" />
+ <list>
+ <listentry caption="Configure your internal LAN" step="selectinterface" />
+ <listentry caption="Exit network wizard" step="end" />
+ </list>
+ <code>
self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")
- </code>
- </step>
-
- <step id="wlanconfig">
- <text value="Please configure your internet connection by filling out the required values.\nWhen you are ready press OK to continue." />
- <displaytext value="Configure interface" />
- <config screen="AdapterSetup" module="NetworkSetup" args="(self.selectedInterface,self.ap,self.WlanList)" type="ConfigList" />
- <code>
+ </code>
+ </step>
+ <step id="wlanconfig">
+ <text value="Please configure your internet connection by filling out the required values.\nWhen you are ready press OK to continue." />
+ <displaytext value="Configure interface" />
+ <config screen="AdapterSetup" module="NetworkSetup" args="(self.selectedInterface,self.ap,self.WlanList)" type="ConfigList" />
+ <code>
self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")
self.selectKey("LEFT")
self.selectKey("RIGHT")
- </code>
- <code pos="after" async="yes">
+ </code>
+ <code pos="after" async="yes">
self.AdapterSetupEnd(self.selectedInterface)
- </code>
- </step>
+ </code>
+ </step>
+ <step id="checkWlanstatusend" nextstep="end">
+ <condition>
+self.condition = (self.InterfaceState == True )
+ </condition>
+ <text value="Your Dreambox is now ready to use.\n\nYour internet connection is working now.\n\nPlease press OK to continue." />
+ <displaytext value="Please follow the instructions on the TV" />
+ <code>
+self.clearSelectedKeys()
+self.selectKey("OK")
+self["text"].setText(self.Text)
+ </code>
+ <code pos="after">
+currStep = self.numSteps
+self.wizard[currStep]["nextstep"] = None
+self.markDone()
+self.close()
+ </code>
+ </step>
+ <step id="checkWlanstatusend">
+ <condition>
+self.condition = (self.InterfaceState == False )
+ </condition>
+ <text value="Your internet connection is not working!\nPlease choose what you want to do next." />
+ <displaytext value="Please follow the instructions on the TV" />
+ <code>
+self.clearSelectedKeys()
+self.selectKey("OK")
+self.selectKey("UP")
+self.selectKey("DOWN")
+ </code>
+ <list>
+ <listentry caption="Configure your network again" step="selectinterface" />
+ <listentry caption="Exit network wizard" step="end" />
+ </list>
+ </step>
- <step id="end">
- <text value="Thank you for using the wizard.\nPlease press OK to continue." />
- <code>
+ <step id="end">
+ <text value="Thank you for using the wizard.\nPlease press OK to continue." />
+ <code>
self.clearSelectedKeys()
self.selectKey("OK")
- </code>
- </step>
+ </code>
+ </step>
</wizard>
projects / vuplus_dvbapp / commitdiff