X-Git-Url: http://code.vuplus.com/gitweb/?p=vuplus_dvbapp;a=blobdiff_plain;f=lib%2Fdvb%2Fsec.cpp;h=58fc5e39fa6f903485f07c79525760b53f9628b7;hp=8b6bc49197a5920c1910af868fa139f48c4ba4ad;hb=c95ebd0688c39d4fa6e22e85d84fe7d80e3da013;hpb=14932b32d00f5244b99bb9a2ec1bbc00d2194fbe diff --git a/lib/dvb/sec.cpp b/lib/dvb/sec.cpp index 8b6bc49..58fc5e3 100644 --- a/lib/dvb/sec.cpp +++ b/lib/dvb/sec.cpp @@ -108,6 +108,9 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite { bool rotor=false; eDVBSatelliteLNBParameters &lnb_param = m_lnbs[idx]; + bool is_unicable = lnb_param.SatCR_idx != -1; + bool is_unicable_position_switch = lnb_param.SatCR_positions > 1; + if ( lnb_param.m_slot_mask & slot_id ) // lnb for correct tuner? { int ret = 0; @@ -163,7 +166,7 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite eSecDebugNoSimulate("ret1 %d", ret); - if (linked_in_use) + if (linked_in_use && !is_unicable) { // compare tuner data if ( (csw != linked_csw) || @@ -176,7 +179,7 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite ret += 15; eSecDebugNoSimulate("ret2 %d", ret); } - else if (satpos_depends_ptr != -1) + else if ((satpos_depends_ptr != -1) && !(is_unicable && is_unicable_position_switch)) { eSecDebugNoSimulate("satpos depends"); eDVBRegisteredFrontend *satpos_depends_to_fe = (eDVBRegisteredFrontend*) satpos_depends_ptr; @@ -189,6 +192,7 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite else ret += 10; } + eSecDebugNoSimulate("ret3 %d", ret); } else // current fe is dependent of another tuner ... (so this fe can't turn the rotor!) { @@ -200,19 +204,15 @@ int eDVBSatelliteEquipmentControl::canTune(const eDVBFrontendParametersSatellite ret = 0; } } - eSecDebugNoSimulate("ret3 %d", ret); + eSecDebugNoSimulate("ret4 %d", ret); } - else if (!direct_connected) - ret = 0; - - eSecDebugNoSimulate("ret4 %d", ret); if (ret && rotor && rotor_pos != -1) ret -= abs(rotor_pos-sat.orbital_position); eSecDebugNoSimulate("ret5 %d", ret); - if (ret) + if (ret && lnb_param.SatCR_idx != -1) { int lof = sat.frequency > lnb_param.m_lof_threshold ? lnb_param.m_lof_hi : lnb_param.m_lof_lo; @@ -378,8 +378,8 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA { // calc Frequency local = abs(sat.frequency - - ((lof - (lof % 1000)) + ((lof % 1000)>500 ? 1000 : 0)) ); //TODO für den Mist mal ein Macro schreiben - parm.FREQUENCY = (local - (local % 125)) + ((local % 125)>62 ? 125 : 0); + - lof); + parm.FREQUENCY = ((((local * 2) / 125) + 1) / 2) * 125; frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - parm.FREQUENCY); if ( voltage_mode == eDVBSatelliteSwitchParameters::_14V @@ -399,20 +399,21 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA } else { - unsigned int tmp = abs(sat.frequency - - ((lof - (lof % 1000)) + ((lof % 1000)>500 ? 1000 : 0)) ) + int tmp1 = abs(sat.frequency + -lof) + lnb_param.SatCRvco - 1400000 + lnb_param.guard_offset; - parm.FREQUENCY = (lnb_param.SatCRvco - (tmp % 4000))+((tmp%4000)>2000?4000:0)+lnb_param.guard_offset; - lnb_param.UnicableTuningWord = (((tmp / 4000)+((tmp%4000)>2000?1:0)) + int tmp2 = ((((tmp1 * 2) / 4000) + 1) / 2) * 4000; + parm.FREQUENCY = lnb_param.SatCRvco - (tmp1-tmp2) + lnb_param.guard_offset; + lnb_param.UnicableTuningWord = ((tmp2 / 4000) | ((band & 1) ? 0x400 : 0) //HighLow | ((band & 2) ? 0x800 : 0) //VertHor | ((lnb_param.LNBNum & 1) ? 0 : 0x1000) //Umschaltung LNB1 LNB2 | (lnb_param.SatCR_idx << 13)); //Adresse des SatCR eDebug("[prepare] UnicableTuningWord %#04x",lnb_param.UnicableTuningWord); eDebug("[prepare] guard_offset %d",lnb_param.guard_offset); - frontend.setData(eDVBFrontend::FREQ_OFFSET, sat.frequency - ((lnb_param.UnicableTuningWord & 0x3FF) *4000 + 1400000 - lnb_param.SatCRvco + lof)); + frontend.setData(eDVBFrontend::FREQ_OFFSET, (lnb_param.UnicableTuningWord & 0x3FF) *4000 + 1400000 + lof - (2 * (lnb_param.SatCRvco - (tmp1-tmp2))) ); } if (diseqc_mode >= eDVBSatelliteDiseqcParameters::V1_0) @@ -746,10 +747,10 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA diseqc.data[3] = RotorCmd; diseqc.data[4] = 0x00; } - if(lnb_param.SatCR_idx == -1) +// if(lnb_param.SatCR_idx == -1) { int mrt = m_params[MOTOR_RUNNING_TIMEOUT]; // in seconds! - if ( rotor_param.m_inputpower_parameters.m_use ) + if ( rotor_param.m_inputpower_parameters.m_use || lnb_param.SatCR_idx == -1) { // use measure rotor input power to detect rotor state bool turn_fast = need_turn_fast(rotor_param.m_inputpower_parameters.m_turning_speed); eSecCommand::rotor cmd; @@ -953,6 +954,40 @@ RESULT eDVBSatelliteEquipmentControl::prepare(iDVBFrontend &frontend, FRONTENDPA return -1; } +void eDVBSatelliteEquipmentControl::prepareTurnOffSatCR(iDVBFrontend &frontend, int satcr) +{ + eSecCommandList sec_sequence; + + // check if voltage is disabled + eSecCommand::pair compare; + compare.steps = +9; //only close frontend + compare.voltage = iDVBFrontend::voltageOff; + + sec_sequence.push_back( eSecCommand(eSecCommand::IF_VOLTAGE_GOTO, compare) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS]) ); + + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage18_5) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_TONE, iDVBFrontend::toneOff) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_SWITCH_CMDS]) ); + + eDVBDiseqcCommand diseqc; + memset(diseqc.data, 0, MAX_DISEQC_LENGTH); + diseqc.len = 5; + diseqc.data[0] = 0xE0; + diseqc.data[1] = 0x10; + diseqc.data[2] = 0x5A; + diseqc.data[3] = satcr << 5; + diseqc.data[4] = 0x00; + + sec_sequence.push_back( eSecCommand(eSecCommand::SEND_DISEQC, diseqc) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SLEEP, m_params[DELAY_AFTER_LAST_DISEQC_CMD]) ); + sec_sequence.push_back( eSecCommand(eSecCommand::SET_VOLTAGE, iDVBFrontend::voltage13) ); + sec_sequence.push_back( eSecCommand(eSecCommand::DELAYED_CLOSE_FRONTEND) ); + + frontend.setSecSequence(sec_sequence); +} + RESULT eDVBSatelliteEquipmentControl::clear() { eSecDebug("eDVBSatelliteEquipmentControl::clear()"); @@ -1257,6 +1292,26 @@ RESULT eDVBSatelliteEquipmentControl::setLNBSatCRvco(int SatCRvco) return -ENOENT; return 0; } + +RESULT eDVBSatelliteEquipmentControl::setLNBSatCRpositions(int SatCR_positions) +{ + eSecDebug("eDVBSatelliteEquipmentControl::setLNBSatCRpositions(%d)", SatCR_positions); + if(SatCR_positions < 1 || SatCR_positions > 2) + return -EPERM; + if ( currentLNBValid() ) + m_lnbs[m_lnbidx].SatCR_positions = SatCR_positions; + else + return -ENOENT; + return 0; +} + +RESULT eDVBSatelliteEquipmentControl::getLNBSatCRpositions() +{ + if ( currentLNBValid() ) + return m_lnbs[m_lnbidx].SatCR_positions; + return -ENOENT; +} + RESULT eDVBSatelliteEquipmentControl::getLNBSatCR() { if ( currentLNBValid() )