code.vuplus.com Git - vuplus_dvbapp/blob - lib/python/Screens/ScanSetup.py

   1 from Screen import Screen
   2 from ServiceScan import *
   3 from Components.config import *
   4 from Components.ActionMap import NumberActionMap
   5 from Components.ConfigList import ConfigList
   6 from Components.config import config
   7 from Components.config import getConfigListEntry
   8 from Components.NimManager import nimmanager
   9 from Components.Label import Label
  10 from enigma import eDVBFrontendParametersSatellite
  11
  12 def getInitialTransponderList(tlist, pos):
  13         print pos
  14         list = nimmanager.getTransponders(pos)
  15
  16         for x in list:
  17                 if x[0] == 0:           #SAT
  18                         parm = eDVBFrontendParametersSatellite()
  19                         parm.frequency = x[1]
  20                         parm.symbol_rate = x[2]
  21                         parm.polarisation = x[3] # eDVBFrontendParametersSatellite.Polarisation.Verti
  22                         #parm.fec = x[4]                        # eDVBFrontendParametersSatellite.FEC.f3_4;
  23                         parm.fec = 6                                    # AUTO
  24                         #parm.inversion = 1     #eDVBFrontendParametersSatellite.Inversion.Off;
  25                         parm.inversion = 2              #AUTO
  26                         parm.orbital_position = pos
  27                         tlist.append(parm)
  28
  29 class ScanSetup(Screen):
  30     def __init__(self, session):
  31         Screen.__init__(self, session)
  32
  33         self.updateSatList()
  34         self.createConfig()
  35
  36
  37         self["actions"] = NumberActionMap(["SetupActions"],
  38         {
  39             "ok": self.keyGo,
  40             "cancel": self.keyCancel,
  41             "left": self.keyLeft,
  42             "right": self.keyRight,
  43             "1": self.keyNumberGlobal,
  44             "2": self.keyNumberGlobal,
  45             "3": self.keyNumberGlobal,
  46             "4": self.keyNumberGlobal,
  47             "5": self.keyNumberGlobal,
  48             "6": self.keyNumberGlobal,
  49             "7": self.keyNumberGlobal,
  50             "8": self.keyNumberGlobal,
  51             "9": self.keyNumberGlobal,
  52             "0": self.keyNumberGlobal
  53         }, -1)
  54
  55         self.list = []
  56         self["config"] = ConfigList(self.list)
  57         self.createSetup()
  58
  59         self["introduction"] = Label("Press OK to start the scan")
  60
  61     def updateSatList(self):
  62         self.satList = []
  63         for slot in nimmanager.nimslots:
  64             self.satList.append(nimmanager.getSatListForNim(slot.slotid))
  65
  66     def createSetup(self):
  67         self.list = []
  68
  69         self.list.append(getConfigListEntry("Type of scan", config.scan.type))
  70         self.list.append(getConfigListEntry("Tuner", config.scan.nims))
  71
  72         # single transponder scan
  73         if (config.scan.type.value == 0):
  74             if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
  75                 self.list.append(getConfigListEntry("Satellite", config.scan.satselection[config.scan.nims.value]))
  76                 self.list.append(getConfigListEntry("Frequency", config.scan.sat.frequency))
  77                 self.list.append(getConfigListEntry("Inversion", config.scan.sat.inversion))
  78                 self.list.append(getConfigListEntry("Symbolrate", config.scan.sat.symbolrate))
  79                 self.list.append(getConfigListEntry("Polarity", config.scan.sat.polarization))
  80                 self.list.append(getConfigListEntry("FEC", config.scan.sat.fec))
  81             if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
  82                 self.list.append(getConfigListEntry("Frequency", config.scan.cab.frequency))
  83                 self.list.append(getConfigListEntry("Inversion", config.scan.cab.inversion))
  84                 self.list.append(getConfigListEntry("Symbolrate", config.scan.cab.symbolrate))
  85                 self.list.append(getConfigListEntry("Modulation", config.scan.cab.modulation))
  86                 self.list.append(getConfigListEntry("FEC", config.scan.cab.fec))
  87             if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
  88                 self.list.append(getConfigListEntry("Frequency", config.scan.ter.frequency))
  89                 self.list.append(getConfigListEntry("Inversion", config.scan.ter.inversion))
  90                 self.list.append(getConfigListEntry("Bandwidth", config.scan.ter.bandwidth))
  91                 self.list.append(getConfigListEntry("Code rate high", config.scan.ter.fechigh))
  92                 self.list.append(getConfigListEntry("Code rate low", config.scan.ter.feclow))
  93                 self.list.append(getConfigListEntry("Modulation", config.scan.ter.modulation))
  94                 self.list.append(getConfigListEntry("Transmission mode", config.scan.ter.transmission))
  95                 self.list.append(getConfigListEntry("Guard interval mode", config.scan.ter.guard))
  96                 self.list.append(getConfigListEntry("Hierarchy mode", config.scan.ter.hierarchy))
  97
  98         # single satellite scan
  99         print config.scan.satselection
 100         if (config.scan.type.value == 1):
 101             self.updateSatList()
 102             print config.scan.satselection[config.scan.nims.value]
 103             self.list.append(getConfigListEntry("Satellite", config.scan.satselection[config.scan.nims.value]))
 104
 105
 106         # multi sat scan
 107         if (config.scan.type.value == 2):
 108             # if (norotor)
 109             tlist = []
 110             SatList = nimmanager.getSatListForNim(config.scan.nims.value)
 111
 112             for x in SatList:
 113                 if self.Satexists(tlist, x[1]) == 0:
 114                     tlist.append(x[1])
 115                     sat = configElement_nonSave(x[1], configSelection, 0, ("Enable", "Disable"))
 116                     self.list.append(getConfigListEntry(nimmanager.getSatDescription(x[1]), sat))
 117
 118             # if (rotor):
 119            # for sat in nimmanager.satList:
 120             #    self.list.append(getConfigListEntry(sat[0], config.scan.scansat[sat[1]]))
 121
 122         self["config"].list = self.list
 123         self["config"].l.setList(self.list)
 124
 125     def Satexists(self, tlist, pos):
 126         for x in tlist:
 127             if x == pos:
 128                 return 1
 129         return 0
 130
 131     def newConfig(self):
 132         print self["config"].getCurrent()
 133         if self["config"].getCurrent()[0] == "Type of scan":
 134             self.createSetup()
 135         if self["config"].getCurrent()[0] == "Tuner":
 136             self.createSetup()
 137
 138     def createConfig(self):
 139             config.scan = ConfigSubsection()
 140             config.scan.sat = ConfigSubsection()
 141             config.scan.cab = ConfigSubsection()
 142             config.scan.ter = ConfigSubsection()
 143
 144             config.scan.type = configElement_nonSave("config.scan.type", configSelection, 0, ("Single transponder", "Single satellite", "Multisat"))
 145             nimList = [ ]
 146             for nim in nimmanager.nimList():
 147                 nimList.append(nim[0])
 148             nimList.append("all")
 149             config.scan.nims = configElement_nonSave("config.scan.nims", configSelection, 0, nimList)
 150
 151             # sat
 152             config.scan.sat.frequency = configElement_nonSave("config.scan.sat.frequency", configSequence, [11836], configsequencearg.get("INTEGER", (10000, 14000)))
 153             config.scan.sat.inversion = configElement_nonSave("config.scan.sat.inversion", configSelection, 2, ("on", "off", "auto"))
 154             config.scan.sat.symbolrate = configElement_nonSave("config.scan.sat.symbolrate", configSequence, [27500], configsequencearg.get("INTEGER", (1, 30000)))
 155             config.scan.sat.polarization = configElement_nonSave("config.scan.sat.polarization", configSelection, 0, ("horizontal", "vertical",  "circular left", "circular right"))
 156             config.scan.sat.fec = configElement_nonSave("config.scan.sat.fec", configSelection, 7, ("None", "1/2", "2/3", "3/4", "5/6", "7/8", "auto"))
 157
 158
 159             # cable
 160             config.scan.cab.frequency = configElement_nonSave("config.scan.cab.frequency", configSequence, [466], configsequencearg.get("INTEGER", (10000, 14000)))
 161             config.scan.cab.inversion = configElement_nonSave("config.scan.cab.inversion", configSelection, 0, ("auto", "off", "on"))
 162             config.scan.cab.modulation = configElement_nonSave("config.scan.cab.modulation", configSelection, 0, ("Auto", "16-QAM", "32-QAM", "64-QAM", "128-QAM", "256-QAM"))
 163             config.scan.cab.fec = configElement_nonSave("config.scan.cab.fec", configSelection, 0, ("Auto", "1/2", "2/3", "3/4", "4/5", "5/6", "7/8", "8/9"))
 164             config.scan.cab.symbolrate = configElement_nonSave("config.scan.cab.symbolrate", configSequence, [6900], configsequencearg.get("INTEGER", (1, 30000)))
 165
 166             # terrestial
 167             config.scan.ter.frequency = configElement_nonSave("config.scan.ter.frequency", configSequence, [466], configsequencearg.get("INTEGER", (10000, 14000)))
 168             config.scan.ter.inversion = configElement_nonSave("config.scan.ter.inversion", configSelection, 0, ("auto", "off", "on"))
 169             config.scan.ter.bandwidth = configElement_nonSave("config.scan.ter.bandwidth", configSelection, 0, ("Auto", "6 MHz", "7MHz", "8MHz"))
 170             config.scan.ter.fechigh = configElement_nonSave("config.scan.ter.fechigh", configSelection, 0, ("Auto", "1/2", "2/3", "3/4", "4/5", "5/6", "7/8", "8/9"))
 171             config.scan.ter.feclow = configElement_nonSave("config.scan.ter.feclow", configSelection, 0, ("Auto", "1/2", "2/3", "3/4", "4/5", "5/6", "7/8", "8/9"))
 172             config.scan.ter.modulation = configElement_nonSave("config.scan.ter.modulation", configSelection, 0, ("Auto", "16-QAM", "32-QAM", "64-QAM", "128-QAM", "256-QAM"))
 173             config.scan.ter.transmission = configElement_nonSave("config.scan.ter.transmission", configSelection, 0, ("Auto", "2K", "8K"))
 174             config.scan.ter.guard = configElement_nonSave("config.scan.ter.guard", configSelection, 0, ("Auto", "1/4", "1/8", "1/16", "1/32"))
 175             config.scan.ter.hierarchy = configElement_nonSave("config.scan.ter.hierarchy", configSelection, 0, ("Auto", "1", "2", "4"))
 176
 177             config.scan.scansat = {}
 178             for sat in nimmanager.satList:
 179                 #print sat[1]
 180                 config.scan.scansat[sat[1]] = configElement_nonSave("config.scan.scansat[" + str(sat[1]) + "]", configSelection, 0, ("yes", "no"))
 181
 182             config.scan.satselection = []
 183             slotid = 0
 184             for slot in nimmanager.nimslots:
 185                 config.scan.satselection.append(configElement_nonSave("config.scan.satselection[" + str(slot.slotid) + "]", configSatlist, 0, self.satList[slot.slotid]))
 186
 187     def keyLeft(self):
 188         self["config"].handleKey(config.key["prevElement"])
 189         self.newConfig()
 190
 191     def keyRight(self):
 192         self["config"].handleKey(config.key["nextElement"])
 193         self.newConfig()
 194
 195     def keyNumberGlobal(self, number):
 196         print "You pressed number " + str(number)
 197         if (self["config"].getCurrent()[1].parent.enabled == True):
 198             self["config"].handleKey(config.key[str(number)])
 199
 200     def addSatTransponder(self, tlist, frequency, symbol_rate, polarisation, fec, inversion, orbital_position):
 201                 print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(polarisation) + " fec: " + str(fec) + " inversion: " + str(inversion)
 202                 print "orbpos: " + str(orbital_position)
 203                 parm = eDVBFrontendParametersSatellite()
 204                 parm.frequency = frequency * 1000
 205                 parm.symbol_rate = symbol_rate * 1000
 206                 parm.polarisation = polarisation # eDVBFrontendParametersSatellite.Polarisation.Verti
 207                 parm.fec = fec                  # eDVBFrontendParametersSatellite.FEC.f3_4;
 208                 #parm.fec = 6                                   # AUTO
 209                 parm.inversion = inversion      #eDVBFrontendParametersSatellite.Inversion.Off;
 210                 #parm.inversion = 2             #AUTO
 211                 parm.orbital_position = int(orbital_position)
 212                 tlist.append(parm)
 213
 214         # FIXME use correct parameters
 215     def addCabTransponder(self, tlist, frequency, symbol_rate, polarisation, fec, inversion, orbital_position):
 216                 print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(polarisation) + " fec: " + str(fec) + " inversion: " + str(inversion)
 217                 print "orbpos: " + str(orbital_position)
 218                 parm = eDVBFrontendParametersCable()
 219                 parm.frequency = frequency * 1000
 220                 parm.symbol_rate = symbol_rate * 1000
 221                 parm.polarisation = polarisation # eDVBFrontendParametersSatellite.Polarisation.Verti
 222                 parm.fec = fec                  # eDVBFrontendParametersSatellite.FEC.f3_4;
 223                 #parm.fec = 6                                   # AUTO
 224                 parm.inversion = inversion      #eDVBFrontendParametersSatellite.Inversion.Off;
 225                 #parm.inversion = 2             #AUTO
 226                 parm.orbital_position = int(orbital_position)
 227                 tlist.append(parm)
 228
 229         # FIXME use correct parameters
 230     def addTerTransponder(self, tlist, frequency, symbol_rate, polarisation, fec, inversion, orbital_position):
 231                 print "Add Sat: frequ: " + str(frequency) + " symbol: " + str(symbol_rate) + " pol: " + str(polarisation) + " fec: " + str(fec) + " inversion: " + str(inversion)
 232                 print "orbpos: " + str(orbital_position)
 233                 parm = eDVBFrontendParametersTerrestrial()
 234                 parm.frequency = frequency * 1000
 235                 parm.symbol_rate = symbol_rate * 1000
 236                 parm.polarisation = polarisation # eDVBFrontendParametersSatellite.Polarisation.Verti
 237                 parm.fec = fec                  # eDVBFrontendParametersSatellite.FEC.f3_4;
 238                 #parm.fec = 6                                   # AUTO
 239                 parm.inversion = inversion      #eDVBFrontendParametersSatellite.Inversion.Off;
 240                 #parm.inversion = 2             #AUTO
 241                 parm.orbital_position = int(orbital_position)
 242                 tlist.append(parm)
 243
 244     def keyGo(self):
 245         tlist = []
 246         if (config.scan.type.value == 0): # single transponder scan
 247                 if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-S"]):
 248                                 self.addSatTransponder(tlist, config.scan.sat.frequency.value[0],
 249                                                                                   config.scan.sat.symbolrate.value[0],
 250                                                                                   config.scan.sat.polarization.value,
 251                                                                                   config.scan.sat.fec.value,
 252                                                                                   config.scan.sat.inversion.value,
 253                                                                                   self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1])
 254                 if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-C"]):
 255                                 self.addCabTransponder(tlist, config.scan.cab.frequency.value[0],
 256                                                                                   config.scan.cab.symbolrate.value[0],
 257                                                                                   config.scan.cab.polarization.value,
 258                                                                                   config.scan.cab.fec.value,
 259                                                                                   config.scan.cab.inversion.value,
 260                                                                                   self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1])
 261                 if (nimmanager.getNimType(config.scan.nims.value) == nimmanager.nimType["DVB-T"]):
 262                                 self.addTerTransponder(tlist, config.scan.sat.frequency.value[0],
 263                                                                                   config.scan.sat.symbolrate.value[0],
 264                                                                                   config.scan.sat.polarization.value,
 265                                                                                   config.scan.sat.fec.value,
 266                                                                                   config.scan.sat.inversion.value,
 267                                                                                   self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1])
 268
 269         if (config.scan.type.value == 1):
 270                 getInitialTransponderList(tlist, int(self.satList[config.scan.nims.value][config.scan.satselection[config.scan.nims.value].value][1]))
 271
 272                 if (config.scan.type.value == 2): # multi sat scan
 273                         SatList = nimmanager.getSatListForNim(config.scan.nims.value)
 274
 275                         for x in self.list:
 276                                 if x[1].parent.value == 0:
 277                                         print "   " + str(x[1].parent.configPath)
 278                                         getInitialTransponderList(tlist, x[1].parent.configPath)
 279
 280
 281         for x in self["config"].list:
 282             x[1].save()
 283
 284
 285         self.session.openWithCallback(self.keyCancel, ServiceScan, tlist)
 286
 287         #self.close()
 288
 289     def keyCancel(self):
 290         for x in self["config"].list:
 291             x[1].cancel()
 292         self.close()
 293
 294 class ScanSimple(Screen):
 295
 296         def keyOK(self):
 297                 print "start scan for sats:"
 298                 tlist = [ ]
 299                 for x in self.list:
 300                         if x[1].parent.value == 0:
 301                                 print "   " + str(x[1].parent.configPath)
 302                                 getInitialTransponderList(tlist, x[1].parent.configPath)
 303
 304                 self.session.openWithCallback(self.keyCancel, ServiceScan, tlist)
 305
 306         def keyCancel(self):
 307                 self.close()
 308
 309         def keyLeft(self):
 310                 self["config"].handleKey(config.key["prevElement"])
 311
 312         def keyRight(self):
 313                 self["config"].handleKey(config.key["nextElement"])
 314
 315         def Satexists(self, tlist, pos):
 316                 for x in tlist:
 317                         if x == pos:
 318                                 return 1
 319                 return 0
 320
 321         def __init__(self, session):
 322                 Screen.__init__(self, session)
 323
 324                 self["actions"] = ActionMap(["SetupActions"],
 325                 {
 326                         "ok": self.keyOK,
 327                         "cancel": self.keyCancel,
 328                         "left": self.keyLeft,
 329                         "right": self.keyRight,
 330                 }, -1)
 331
 332                 self.list = []
 333                 tlist = []
 334
 335                 SatList = nimmanager.getConfiguredSats()
 336
 337                 for x in SatList:
 338                         if self.Satexists(tlist, x) == 0:
 339                                 tlist.append(x)
 340                                 sat = configElement_nonSave(x, configSelection, 0, ("Enable", "Disable"))
 341                                 self.list.append(getConfigListEntry(nimmanager.getSatDescription(x), sat))
 342
 343                 self["config"] = ConfigList(self.list)
 344                 self["header"] = Label("Automatic Scan")
 345                 self["footer"] = Label("Press OK to scan")