code.vuplus.com Git - vuplus_dvbapp/blob - lib/python/Screens/Satconfig.py

   1 from enigma import eDVBDB
   2 from Screen import Screen
   3 from Components.SystemInfo import SystemInfo
   4 from Components.ActionMap import ActionMap
   5 from Components.ConfigList import ConfigListScreen
   6 from Components.MenuList import MenuList
   7 from Components.NimManager import nimmanager
   8 from Components.config import getConfigListEntry, config, ConfigNothing, ConfigSelection, updateConfigElement
   9 from Components.Sources.List import List
  10 from Screens.MessageBox import MessageBox
  11
  12 from time import mktime, localtime
  13 from datetime import datetime
  14
  15 class NimSetup(Screen, ConfigListScreen):
  16         def createSimpleSetup(self, list, mode):
  17                 if mode == "single":
  18                         list.append(getConfigListEntry(_("Satellite"), self.nimConfig.diseqcA))
  19                 else:
  20                         list.append(getConfigListEntry(_("Port A"), self.nimConfig.diseqcA))
  21
  22                 if mode in ["toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"]:
  23                         list.append(getConfigListEntry(_("Port B"), self.nimConfig.diseqcB))
  24                         if mode == "diseqc_a_b_c_d":
  25                                 list.append(getConfigListEntry(_("Port C"), self.nimConfig.diseqcC))
  26                                 list.append(getConfigListEntry(_("Port D"), self.nimConfig.diseqcD))
  27
  28         def createPositionerSetup(self, list):
  29                 nim = self.nimConfig
  30                 list.append(getConfigListEntry(_("Longitude"), nim.longitude))
  31                 list.append(getConfigListEntry(" ", nim.longitudeOrientation))
  32                 list.append(getConfigListEntry(_("Latitude"), nim.latitude))
  33                 list.append(getConfigListEntry(" ", nim.latitudeOrientation))
  34                 if SystemInfo["CanMeasureFrontendInputPower"]:
  35                         self.advancedPowerMeasurement = getConfigListEntry(_("Use Power Measurement"), nim.powerMeasurement)
  36                         list.append(self.advancedPowerMeasurement)
  37                         if nim.powerMeasurement.value:
  38                                 list.append(getConfigListEntry(_("Power threshold in mA"), nim.powerThreshold))
  39                                 self.turningSpeed = getConfigListEntry(_("Rotor turning speed"), nim.turningSpeed)
  40                                 list.append(self.turningSpeed)
  41                                 if nim.turningSpeed.value == "fast epoch":
  42                                         self.turnFastEpochBegin = getConfigListEntry(_("Begin time"), nim.fastTurningBegin)
  43                                         self.turnFastEpochEnd = getConfigListEntry(_("End time"), nim.fastTurningEnd)
  44                                         list.append(self.turnFastEpochBegin)
  45                                         list.append(self.turnFastEpochEnd)
  46                 else:
  47                         if nim.powerMeasurement.value:
  48                                 nim.powerMeasurement.value = False
  49                                 nim.powerMeasurement.save()
  50
  51         def createConfigMode(self):
  52                 if self.nim.isCompatible("DVB-S"):
  53                         choices = { "nothing": _("nothing connected"),
  54                                                 "simple": _("simple"),
  55                                                 "advanced": _("advanced")}
  56                         #if len(nimmanager.getNimListOfType(nimmanager.getNimType(self.slotid), exception = x)) > 0:
  57                         #       choices["equal"] = _("equal to")
  58                         #       choices["satposdepends"] = _("second cable of motorized LNB")
  59                         if len(nimmanager.canEqualTo(self.slotid)) > 0:
  60                                 choices["equal"] = _("equal to")
  61                         if len(nimmanager.canDependOn(self.slotid)) > 0:
  62                                 choices["satposdepends"] = _("second cable of motorized LNB")
  63                         if len(nimmanager.canConnectTo(self.slotid)) > 0:
  64                                 choices["loopthrough"] = _("loopthrough to")
  65                         self.nimConfig.configMode.setChoices(choices)
  66
  67         def createSetup(self):
  68                 print "Creating setup"
  69                 self.list = [ ]
  70
  71                 self.configMode = None
  72                 self.diseqcModeEntry = None
  73                 self.advancedSatsEntry = None
  74                 self.advancedLnbsEntry = None
  75                 self.advancedDiseqcMode = None
  76                 self.advancedUsalsEntry = None
  77                 self.advancedLof = None
  78                 self.advancedPowerMeasurement = None
  79                 self.turningSpeed = None
  80                 self.turnFastEpochBegin = None
  81                 self.turnFastEpochEnd = None
  82                 self.uncommittedDiseqcCommand = None
  83                 self.cableScanType = None
  84                 self.have_advanced = False
  85
  86                 if self.nim.isCompatible("DVB-S"):
  87                         self.configMode = getConfigListEntry(_("Configuration Mode"), self.nimConfig.configMode)
  88                         self.list.append(self.configMode)
  89
  90                         if self.nimConfig.configMode.value == "simple":                 #simple setup
  91                                 self.diseqcModeEntry = getConfigListEntry(_("DiSEqC Mode"), self.nimConfig.diseqcMode)
  92                                 self.list.append(self.diseqcModeEntry)
  93                                 if self.nimConfig.diseqcMode.value in ["single", "toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"]:
  94                                         self.createSimpleSetup(self.list, self.nimConfig.diseqcMode.value)
  95                                 if self.nimConfig.diseqcMode.value == "positioner":
  96                                         self.createPositionerSetup(self.list)
  97                         elif self.nimConfig.configMode.value == "equal":
  98                                 choices = []
  99                                 nimlist = nimmanager.canEqualTo(self.nim.slot)
 100                                 for id in nimlist:
 101                                         #choices.append((str(id), str(chr(65 + id))))
 102                                         choices.append((str(id), nimmanager.getNimDescription(id)))
 103                                 self.nimConfig.connectedTo.setChoices(choices)
 104                                 #self.nimConfig.connectedTo = updateConfigElement(self.nimConfig.connectedTo, ConfigSelection(choices = choices))
 105                                 self.list.append(getConfigListEntry(_("Tuner"), self.nimConfig.connectedTo))
 106                         elif self.nimConfig.configMode.value == "satposdepends":
 107                                 choices = []
 108                                 nimlist = nimmanager.canDependOn(self.nim.slot)
 109                                 for id in nimlist:
 110                                         #choices.append((str(id), str(chr(65 + id))))
 111                                         choices.append((str(id), nimmanager.getNimDescription(id)))
 112                                 self.nimConfig.connectedTo.setChoices(choices)
 113                                 #self.nimConfig.connectedTo = updateConfigElement(self.nimConfig.connectedTo, ConfigSelection(choices = choices))
 114                                 self.list.append(getConfigListEntry(_("Tuner"), self.nimConfig.connectedTo))
 115                         elif self.nimConfig.configMode.value == "loopthrough":
 116                                 choices = []
 117                                 print "connectable to:", nimmanager.canConnectTo(self.slotid)
 118                                 connectable = nimmanager.canConnectTo(self.slotid)
 119                                 for id in connectable:
 120                                         choices.append((str(id), nimmanager.getNimDescription(id)))
 121                                 self.nimConfig.connectedTo.setChoices(choices)
 122                                 #self.nimConfig.connectedTo = updateConfigElement(self.nimConfig.connectedTo, ConfigSelection(choices = choices))
 123                                 self.list.append(getConfigListEntry(_("Connected to"), self.nimConfig.connectedTo))
 124                         elif self.nimConfig.configMode.value == "nothing":
 125                                 pass
 126                         elif self.nimConfig.configMode.value == "advanced": # advanced
 127                                 # SATs
 128                                 self.advancedSatsEntry = getConfigListEntry(_("Satellite"), self.nimConfig.advanced.sats)
 129                                 self.list.append(self.advancedSatsEntry)
 130                                 cur_orb_pos = self.nimConfig.advanced.sats.orbital_position
 131                                 satlist = self.nimConfig.advanced.sat.keys()
 132                                 if cur_orb_pos is not None:
 133                                         if cur_orb_pos not in satlist:
 134                                                 cur_orb_pos = satlist[0]
 135                                         currSat = self.nimConfig.advanced.sat[cur_orb_pos]
 136                                         self.fillListWithAdvancedSatEntrys(currSat)
 137                                 self.have_advanced = True
 138                 elif self.nim.isCompatible("DVB-C"):
 139                         self.configMode = getConfigListEntry(_("Configuration Mode"), self.nimConfig.configMode)
 140                         self.list.append(self.configMode)
 141                         if self.nimConfig.configMode.value == "enabled":
 142                                 self.cableScanType=getConfigListEntry(_("Used service scan type"), self.nimConfig.cable.scan_type)
 143                                 self.list.append(self.cableScanType)
 144                                 if self.nimConfig.cable.scan_type.value == "provider":
 145                                         self.list.append(getConfigListEntry(_("Provider to scan"), self.nimConfig.cable.scan_provider))
 146                                 else:
 147                                         if self.nimConfig.cable.scan_type.value == "bands":
 148                                                 self.list.append(getConfigListEntry(_("Scan band EU VHF I"), self.nimConfig.cable.scan_band_EU_VHF_I))
 149                                                 self.list.append(getConfigListEntry(_("Scan band EU MID"), self.nimConfig.cable.scan_band_EU_MID))
 150                                                 self.list.append(getConfigListEntry(_("Scan band EU VHF III"), self.nimConfig.cable.scan_band_EU_VHF_III))
 151                                                 self.list.append(getConfigListEntry(_("Scan band EU UHF IV"), self.nimConfig.cable.scan_band_EU_UHF_IV))
 152                                                 self.list.append(getConfigListEntry(_("Scan band EU UHF V"), self.nimConfig.cable.scan_band_EU_UHF_V))
 153                                                 self.list.append(getConfigListEntry(_("Scan band EU SUPER"), self.nimConfig.cable.scan_band_EU_SUPER))
 154                                                 self.list.append(getConfigListEntry(_("Scan band EU HYPER"), self.nimConfig.cable.scan_band_EU_HYPER))
 155                                                 self.list.append(getConfigListEntry(_("Scan band US LOW"), self.nimConfig.cable.scan_band_US_LOW))
 156                                                 self.list.append(getConfigListEntry(_("Scan band US MID"), self.nimConfig.cable.scan_band_US_MID))
 157                                                 self.list.append(getConfigListEntry(_("Scan band US HIGH"), self.nimConfig.cable.scan_band_US_HIGH))
 158                                                 self.list.append(getConfigListEntry(_("Scan band US SUPER"), self.nimConfig.cable.scan_band_US_SUPER))
 159                                                 self.list.append(getConfigListEntry(_("Scan band US HYPER"), self.nimConfig.cable.scan_band_US_HYPER))
 160                                         elif self.nimConfig.cable.scan_type.value == "steps":
 161                                                 self.list.append(getConfigListEntry(_("Frequency scan step size(khz)"), self.nimConfig.cable.scan_frequency_steps))
 162                                         self.list.append(getConfigListEntry(_("Scan QAM16"), self.nimConfig.cable.scan_mod_qam16))
 163                                         self.list.append(getConfigListEntry(_("Scan QAM32"), self.nimConfig.cable.scan_mod_qam32))
 164                                         self.list.append(getConfigListEntry(_("Scan QAM64"), self.nimConfig.cable.scan_mod_qam64))
 165                                         self.list.append(getConfigListEntry(_("Scan QAM128"), self.nimConfig.cable.scan_mod_qam128))
 166                                         self.list.append(getConfigListEntry(_("Scan QAM256"), self.nimConfig.cable.scan_mod_qam256))
 167                                         self.list.append(getConfigListEntry(_("Scan SR6900"), self.nimConfig.cable.scan_sr_6900))
 168                                         self.list.append(getConfigListEntry(_("Scan SR6875"), self.nimConfig.cable.scan_sr_6875))
 169                                         self.list.append(getConfigListEntry(_("Scan additional SR"), self.nimConfig.cable.scan_sr_ext1))
 170                                         self.list.append(getConfigListEntry(_("Scan additional SR"), self.nimConfig.cable.scan_sr_ext2))
 171                         self.have_advanced = False
 172                 elif self.nim.isCompatible("DVB-T"):
 173                         self.configMode = getConfigListEntry(_("Configuration Mode"), self.nimConfig.configMode)
 174                         self.list.append(self.configMode)
 175                         self.have_advanced = False
 176                         if self.nimConfig.configMode.value == "enabled":
 177                                 self.list.append(getConfigListEntry(_("Terrestrial provider"), self.nimConfig.terrestrial))
 178                                 self.list.append(getConfigListEntry(_("Enable 5V for active antenna"), self.nimConfig.terrestrial_5V))
 179                 else:
 180                         self.have_advanced = False
 181                 self["config"].list = self.list
 182                 self["config"].l.setList(self.list)
 183
 184         def newConfig(self):
 185                 checkList = (self.configMode, self.diseqcModeEntry, self.advancedSatsEntry, \
 186                         self.advancedLnbsEntry, self.advancedDiseqcMode, self.advancedUsalsEntry, \
 187                         self.advancedLof, self.advancedPowerMeasurement, self.turningSpeed, \
 188                         self.uncommittedDiseqcCommand, self.cableScanType)
 189                 for x in checkList:
 190                         if self["config"].getCurrent() == x:
 191                                 self.createSetup()
 192
 193         def run(self):
 194                 if self.have_advanced and self.nim.config_mode == "advanced":
 195                         self.fillAdvancedList()
 196                 for x in self.list:
 197                         if x in [self.turnFastEpochBegin, self.turnFastEpochEnd]:
 198                                 # workaround for storing only hour*3600+min*60 value in configfile
 199                                 # not really needed.. just for cosmetics..
 200                                 tm = localtime(x[1].value)
 201                                 dt = datetime(1970, 1, 1, tm.tm_hour, tm.tm_min)
 202                                 x[1].value = int(mktime(dt.timetuple()))
 203                         x[1].save()
 204                 nimmanager.sec.update()
 205                 self.saveAll()
 206
 207         def fillListWithAdvancedSatEntrys(self, Sat):
 208                 lnbnum = int(Sat.lnb.value)
 209                 currLnb = self.nimConfig.advanced.lnb[lnbnum]
 210
 211                 if isinstance(currLnb, ConfigNothing):
 212                         currLnb = None
 213
 214                 self.list.append(getConfigListEntry(_("Voltage mode"), Sat.voltage))
 215                 self.list.append(getConfigListEntry(_("Tone mode"), Sat.tonemode))
 216                 if currLnb and currLnb.diseqcMode.value == "1_2":
 217                         if lnbnum < 125:
 218                                 self.advancedUsalsEntry = getConfigListEntry(_("Use usals for this sat"), Sat.usals)
 219                                 self.list.append(self.advancedUsalsEntry)
 220                                 if not Sat.usals.value:
 221                                         self.list.append(getConfigListEntry(_("Stored position"), Sat.rotorposition))
 222
 223                 # LNBs
 224                 self.advancedLnbsEntry = getConfigListEntry(_("LNB"), Sat.lnb)
 225                 self.list.append(self.advancedLnbsEntry)
 226                 if currLnb:
 227                         if lnbnum < 125:
 228                                 self.advancedDiseqcMode = getConfigListEntry(_("DiSEqC mode"), currLnb.diseqcMode)
 229                                 self.list.append(self.advancedDiseqcMode)
 230                         if currLnb.diseqcMode.value != "none":
 231                                 self.list.append(getConfigListEntry(_("Toneburst"), currLnb.toneburst))
 232                                 self.list.append(getConfigListEntry(_("Committed DiSEqC command"), currLnb.commitedDiseqcCommand))
 233                                 self.list.append(getConfigListEntry(_("Fast DiSEqC"), currLnb.fastDiseqc))
 234                                 self.list.append(getConfigListEntry(_("Sequence repeat"), currLnb.sequenceRepeat))
 235                                 if currLnb.diseqcMode.value == "1_0":
 236                                         self.list.append(getConfigListEntry(_("Command order"), currLnb.commandOrder1_0))
 237                                 else:
 238                                         if currLnb.uncommittedDiseqcCommand.index:
 239                                                 if currLnb.commandOrder.value == "ct":
 240                                                         currLnb.commandOrder.value = "cut"
 241                                                 elif currLnb.commandOrder.value == "tc":
 242                                                         currLnb.commandOrder.value = "tcu"
 243                                         else:
 244                                                 if currLnb.commandOrder.index & 1:
 245                                                         currLnb.commandOrder.value = "tc"
 246                                                 else:
 247                                                         currLnb.commandOrder.value = "ct"
 248                                         self.list.append(getConfigListEntry(_("Command order"), currLnb.commandOrder))
 249                                         self.uncommittedDiseqcCommand = getConfigListEntry(_("Uncommitted DiSEqC command"), currLnb.uncommittedDiseqcCommand)
 250                                         self.list.append(self.uncommittedDiseqcCommand)
 251                                         self.list.append(getConfigListEntry(_("DiSEqC repeats"), currLnb.diseqcRepeats))
 252                                 if currLnb.diseqcMode.value == "1_2":
 253                                         self.list.append(getConfigListEntry(_("Longitude"), currLnb.longitude))
 254                                         self.list.append(getConfigListEntry(" ", currLnb.longitudeOrientation))
 255                                         self.list.append(getConfigListEntry(_("Latitude"), currLnb.latitude))
 256                                         self.list.append(getConfigListEntry(" ", currLnb.latitudeOrientation))
 257                                         if SystemInfo["CanMeasureFrontendInputPower"]:
 258                                                 self.advancedPowerMeasurement = getConfigListEntry(_("Use Power Measurement"), currLnb.powerMeasurement)
 259                                                 self.list.append(self.advancedPowerMeasurement)
 260                                                 if currLnb.powerMeasurement.value:
 261                                                         self.list.append(getConfigListEntry(_("Power threshold in mA"), currLnb.powerThreshold))
 262                                                         self.turningSpeed = getConfigListEntry(_("Rotor turning speed"), currLnb.turningSpeed)
 263                                                         self.list.append(self.turningSpeed)
 264                                                         if currLnb.turningSpeed.value == "fast epoch":
 265                                                                 self.turnFastEpochBegin = getConfigListEntry(_("Begin time"), currLnb.fastTurningBegin)
 266                                                                 self.turnFastEpochEnd = getConfigListEntry(_("End time"), currLnb.fastTurningEnd)
 267                                                                 self.list.append(self.turnFastEpochBegin)
 268                                                                 self.list.append(self.turnFastEpochEnd)
 269                                         else:
 270                                                 if currLnb.powerMeasurement.value:
 271                                                         currLnb.powerMeasurement.value = False
 272                                                         currLnb.powerMeasurement.save()
 273                         self.advancedLof = getConfigListEntry(_("LOF"), currLnb.lof)
 274                         self.list.append(self.advancedLof)
 275                         if currLnb.lof.value == "user_defined":
 276                                 self.list.append(getConfigListEntry(_("LOF/L"), currLnb.lofl))
 277                                 self.list.append(getConfigListEntry(_("LOF/H"), currLnb.lofh))
 278                                 self.list.append(getConfigListEntry(_("Threshold"), currLnb.threshold))
 279 #                       self.list.append(getConfigListEntry(_("12V Output"), currLnb.output_12v))
 280                         self.list.append(getConfigListEntry(_("Increased voltage"), currLnb.increased_voltage))
 281
 282         def fillAdvancedList(self):
 283                 self.list = [ ]
 284                 self.configMode = getConfigListEntry(_("Configuration Mode"), self.nimConfig.configMode)
 285                 self.list.append(self.configMode)
 286                 self.advancedSatsEntry = getConfigListEntry(_("Satellite"), self.nimConfig.advanced.sats)
 287                 self.list.append(self.advancedSatsEntry)
 288                 for x in self.nimConfig.advanced.sat.keys():
 289                         Sat = self.nimConfig.advanced.sat[x]
 290                         self.fillListWithAdvancedSatEntrys(Sat)
 291                 self["config"].list = self.list
 292
 293         def keySave(self):
 294                 old_configured_sats = nimmanager.getConfiguredSats()
 295                 self.run()
 296                 new_configured_sats = nimmanager.getConfiguredSats()
 297                 self.unconfed_sats = old_configured_sats - new_configured_sats
 298                 self.satpos_to_remove = None
 299                 self.deleteConfirmed(False)
 300
 301         def deleteConfirmed(self, confirmed):
 302                 if confirmed:
 303                         eDVBDB.getInstance().removeServices(-1, -1, -1, self.satpos_to_remove)
 304
 305                 if self.satpos_to_remove is not None:
 306                         self.unconfed_sats.remove(self.satpos_to_remove)
 307
 308                 self.satpos_to_remove = None
 309                 for orbpos in self.unconfed_sats:
 310                         self.satpos_to_remove = orbpos
 311                         orbpos = self.satpos_to_remove
 312                         try:
 313                                 # why we need this cast?
 314                                 sat_name = str(nimmanager.getSatDescription(orbpos))
 315                         except:
 316                                 if orbpos > 1800: # west
 317                                         orbpos = 3600 - orbpos
 318                                         h = _("W")
 319                                 else:
 320                                         h = _("E")
 321                                 sat_name = ("%d.%d" + h) % (orbpos / 10, orbpos % 10)
 322                         self.session.openWithCallback(self.deleteConfirmed, MessageBox, _("Delete no more configured satellite\n%s?") %(sat_name))
 323                         break
 324                 if not self.satpos_to_remove:
 325                         self.close()
 326
 327         def __init__(self, session, slotid):
 328                 Screen.__init__(self, session)
 329                 self.list = [ ]
 330
 331                 ConfigListScreen.__init__(self, self.list)
 332
 333                 self["actions"] = ActionMap(["SetupActions"],
 334                 {
 335                         "ok": self.keySave,
 336                         "cancel": self.keyCancel,
 337                 }, -2)
 338
 339                 self.slotid = slotid
 340                 self.nim = nimmanager.nim_slots[slotid]
 341                 self.nimConfig = self.nim.config
 342                 self.createConfigMode()
 343                 self.createSetup()
 344
 345         def keyLeft(self):
 346                 ConfigListScreen.keyLeft(self)
 347                 self.newConfig()
 348
 349         def keyRight(self):
 350                 ConfigListScreen.keyRight(self)
 351                 self.newConfig()
 352
 353         def saveAll(self):
 354                 if self.nim.isCompatible("DVB-S"):
 355                         # reset connectedTo to all choices to properly store the default value
 356                         choices = []
 357                         nimlist = nimmanager.getNimListOfType("DVB-S", self.slotid)
 358                         for id in nimlist:
 359                                 choices.append((str(id), nimmanager.getNimDescription(id)))
 360                         self.nimConfig.connectedTo.setChoices(choices)
 361                 for x in self["config"].list:
 362                         x[1].save()
 363
 364         def cancelConfirm(self, result):
 365                 if not result:
 366                         return
 367
 368                 for x in self["config"].list:
 369                         x[1].cancel()
 370                 # we need to call saveAll to reset the connectedTo choices
 371                 self.saveAll()
 372                 self.close()
 373
 374 class NimSelection(Screen):
 375         def __init__(self, session):
 376                 Screen.__init__(self, session)
 377
 378                 self.list = [None] * nimmanager.getSlotCount()
 379                 self["nimlist"] = List(self.list)
 380                 self.updateList()
 381
 382                 self["actions"] = ActionMap(["OkCancelActions"],
 383                 {
 384                         "ok": self.okbuttonClick ,
 385                         "cancel": self.close
 386                 }, -2)
 387
 388         def okbuttonClick(self):
 389                 nim = self["nimlist"].getCurrent()
 390                 nim = nim and nim[3]
 391                 if nim is not None and not nim.empty:
 392                         self.session.openWithCallback(self.updateList, NimSetup, nim.slot)
 393
 394         def updateList(self):
 395                 self.list = [ ]
 396                 for x in nimmanager.nim_slots:
 397                         slotid = x.slot
 398                         nimConfig = nimmanager.getNimConfig(x.slot)
 399                         text = nimConfig.configMode.value
 400                         if x.isCompatible("DVB-S"):
 401                                 if nimConfig.configMode.value in ["loopthrough", "equal", "satposdepends"]:
 402                                         text = { "loopthrough": _("loopthrough to"),
 403                                                          "equal": _("equal to"),
 404                                                          "satposdepends": _("second cable of motorized LNB") } [nimConfig.configMode.value]
 405                                         text += " " + _("Tuner") + " " + ["A", "B", "C", "D"][int(nimConfig.connectedTo.value)]
 406                                 elif nimConfig.configMode.value == "nothing":
 407                                         text = _("nothing connected")
 408                                 elif nimConfig.configMode.value == "simple":
 409                                         if nimConfig.diseqcMode.value in ["single", "toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"]:
 410                                                 text = _("Sats") + ": " + nimmanager.getSatName(int(nimConfig.diseqcA.value))
 411                                                 if nimConfig.diseqcMode.value in ["toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"]:
 412                                                         text += "," + nimmanager.getSatName(int(nimConfig.diseqcB.value))
 413                                                 if nimConfig.diseqcMode.value == "diseqc_a_b_c_d":
 414                                                         text += "," + nimmanager.getSatName(int(nimConfig.diseqcC.value))
 415                                                         text += "," + nimmanager.getSatName(int(nimConfig.diseqcD.value))
 416                                         elif nimConfig.diseqcMode.value == "positioner":
 417                                                 text = _("Positioner") + ":"
 418                                                 if nimConfig.positionerMode.value == "usals":
 419                                                         text += _("USALS")
 420                                                 elif nimConfig.positionerMode.value == "manual":
 421                                                         text += _("manual")
 422                                         else:
 423                                                 text = _("simple")
 424                                 elif nimConfig.configMode.value == "advanced":
 425                                         text = _("advanced")
 426                         elif x.isCompatible("DVB-T") or x.isCompatible("DVB-C"):
 427                                 if nimConfig.configMode.value == "nothing":
 428                                         text = _("nothing connected")
 429                                 elif nimConfig.configMode.value == "enabled":
 430                                         text = _("enabled")
 431
 432                         self.list.append((slotid, x.friendly_full_description, text, x))
 433                 self["nimlist"].updateList(self.list)