1 from Screens.Screen import Screen
2 from Plugins.Plugin import PluginDescriptor
4 from enigma import eTimer
6 from Components.ActionMap import ActionMap
7 from Components.Label import Label
8 from Components.Pixmap import Pixmap
9 from Screens.MessageBox import MessageBox
10 from Screens.Setup import SetupSummary
11 from Components.ConfigList import ConfigListScreen
12 from Components.config import getConfigListEntry, config, ConfigSelection, ConfigSubDict, ConfigYesNo
14 from Tools.CList import CList
16 # The "VideoHardware" is the interface to /proc/stb/video.
17 # It generates hotplug events, and gives you the list of
18 # available and preferred modes, as well as handling the currently
19 # selected mode. No other strict checking is done.
21 rates = { } # high-level, use selectable modes.
23 modes = { } # a list of (high-level) modes for a certain port.
25 rates["PAL"] = { "50Hz": { 50: "pal", 60: "pal"},
26 "60Hz": { 50: "pal60", 60: "pal60"},
27 "multi": { 50: "pal", 60: "pal60"} }
28 rates["NTSC"] = { "60Hz": { 50: "ntsc", 60: "ntsc"} }
29 rates["Multi"] = { "multi": { 50: "pal", 60: "ntsc"} }
30 rates["720p"] = { "50Hz": { 50: "720p50", 60: "720p50"},
31 "60Hz": { 50: "720p", 60: "720p"},
32 "multi": { 50: "720p50", 60: "720p"} }
33 rates["1080i"] = { "50Hz": { 50: "1080i50", 60: "1080i50"},
34 "60Hz": { 50: "1080i", 60: "1080i"},
35 "multi": { 50: "1080i50", 60: "1080i"} }
37 "1024x768": { 60: "1024x768"}, # not possible on DM7025
38 "800x600" : { 60: "800x600"}, # also not possible
39 "720x480" : { 60: "720x480"},
40 "720x576" : { 60: "720x576"},
41 "1280x720": { 60: "1280x720"},
42 "1280x720 multi": { 50: "1280x720_50", 60: "1280x720"},
43 "1920x1080": { 60: "1920x1080"},
44 "1920x1080 multi": { 50: "1920x1080", 60: "1920x1080_50"},
45 "1280x1024" : { 60: "1280x1024"},
46 "1366x768" : { 60: "1366x768"},
47 "1366x768 multi" : { 50: "1366x768", 60: "1366x768_50"},
48 "1280x768": { 60: "1280x768"},
49 "640x480" : { 60: "640x480"}
52 modes["Scart"] = ["PAL", "NTSC", "Multi"]
53 modes["YPbPr"] = ["720p", "1080i"]
54 modes["DVI"] = ["720p", "1080i", "PC"]
56 widescreen_modes = set(["720p", "1080i"])
59 self.last_modes_preferred = [ ]
60 self.on_hotplug = CList()
62 self.current_mode = None
63 self.current_port = None
65 self.readAvailableModes()
68 # self.on_hotplug.append(self.createConfig)
70 self.readPreferredModes()
72 # take over old AVSwitch component :)
73 from Components.AVSwitch import AVSwitch
74 # config.av.colorformat.notifiers = [ ]
75 config.av.aspectratio.notifiers = [ ]
76 config.av.tvsystem.notifiers = [ ]
77 config.av.wss.notifiers = [ ]
78 AVSwitch.setInput = self.AVSwitchSetInput
80 config.av.aspect.addNotifier(self.updateAspect)
81 config.av.wss.addNotifier(self.updateAspect)
82 config.av.policy_169.addNotifier(self.updateAspect)
83 config.av.policy_43.addNotifier(self.updateAspect)
85 # until we have the hotplug poll socket
86 # self.timer = eTimer()
87 # self.timer.callback.append(self.readPreferredModes)
88 # self.timer.start(1000)
90 config.av.colorformat.addNotifier(self.updateFastblank)
92 def AVSwitchSetInput(self, mode):
93 self.standby = mode == "SCART"
96 def readAvailableModes(self):
98 modes = open("/proc/stb/video/videomode_choices").read()[:-1]
100 print "couldn't read available videomodes."
101 self.modes_available = [ ]
103 self.modes_available = modes.split(' ')
105 def readPreferredModes(self):
107 modes = open("/proc/stb/video/videomode_preferred").read()[:-1]
108 self.modes_preferred = modes.split(' ')
110 print "reading preferred modes failed, using all modes"
111 self.modes_preferred = self.modes_available
113 if self.modes_preferred != self.last_modes_preferred:
114 self.last_modes_preferred = self.modes_preferred
115 print "hotplug on dvi"
116 self.on_hotplug("DVI") # must be DVI
118 # check if a high-level mode with a given rate is available.
119 def isModeAvailable(self, port, mode, rate):
120 rate = self.rates[mode][rate]
121 for mode in rate.values():
122 # DVI modes must be in "modes_preferred"
124 # if mode not in self.modes_preferred and not config.av.edid_override.value:
125 # print "no, not preferred"
127 if mode not in self.modes_available:
131 def isWidescreenMode(self, port, mode):
132 return mode in self.widescreen_modes
134 def setMode(self, port, mode, rate, force = None):
135 print "setMode - port:", port, "mode:", mode, "rate:", rate
136 # we can ignore "port"
137 self.current_mode = mode
138 self.current_port = port
139 modes = self.rates[mode][rate]
141 mode_50 = modes.get(50)
142 mode_60 = modes.get(60)
143 if mode_50 is None or force == 60:
145 if mode_60 is None or force == 50:
149 open("/proc/stb/video/videomode_50hz", "w").write(mode_50)
150 open("/proc/stb/video/videomode_60hz", "w").write(mode_60)
153 # fallback if no possibility to setup 50/60 hz mode
154 open("/proc/stb/video/videomode", "w").write(mode_50)
156 print "setting videomode failed."
159 open("/etc/videomode", "w").write(mode_50) # use 50Hz mode (if available) for booting
161 print "writing initial videomode to /etc/videomode failed."
163 self.updateAspect(None)
165 def saveMode(self, port, mode, rate):
166 config.av.videoport.value = port
167 config.av.videoport.save()
168 config.av.videomode[port].value = mode
169 config.av.videomode[port].save()
170 config.av.videorate[mode].value = rate
171 config.av.videorate[mode].save()
173 def isPortAvailable(self, port):
177 def isPortUsed(self, port):
179 self.readPreferredModes()
180 return len(self.modes_preferred) != 0
184 def getPortList(self):
185 return [port for port in self.modes if self.isPortAvailable(port)]
187 # get a list with all modes, with all rates, for a given port.
188 def getModeList(self, port):
189 print "getModeList for port", port
191 for mode in self.modes[port]:
192 # list all rates which are completely valid
193 rates = [rate for rate in self.rates[mode] if self.isModeAvailable(port, mode, rate)]
195 # if at least one rate is ok, add this mode
197 res.append( (mode, rates) )
200 def createConfig(self, *args):
201 # create list of output ports
202 portlist = self.getPortList()
204 # create list of available modes
205 config.av.videoport = ConfigSelection(choices = [(port, _(port)) for port in portlist])
206 config.av.videomode = ConfigSubDict()
207 config.av.videorate = ConfigSubDict()
209 for port in portlist:
210 modes = self.getModeList(port)
212 config.av.videomode[port] = ConfigSelection(choices = [mode for (mode, rates) in modes])
213 for (mode, rates) in modes:
214 config.av.videorate[mode] = ConfigSelection(choices = rates)
216 def setConfiguredMode(self):
217 port = config.av.videoport.value
218 if port not in config.av.videomode:
219 print "current port not available, not setting videomode"
222 mode = config.av.videomode[port].value
224 if mode not in config.av.videorate:
225 print "current mode not available, not setting videomode"
228 rate = config.av.videorate[mode].value
229 self.setMode(port, mode, rate)
231 def updateAspect(self, cfgelement):
232 # determine aspect = {any,4:3,16:9,16:10}
233 # determine policy = {bestfit,letterbox,panscan,nonlinear}
236 # config.av.videoport.value: current video output device
239 # 4_3: use policy_169
240 # 16_9,16_10: use policy_43
241 # auto always "bestfit"
242 # config.av.policy_169
243 # letterbox use letterbox
244 # panscan use panscan
246 # config.av.policy_43
247 # pillarbox use panscan
248 # panscan use letterbox ("panscan" is just a bad term, it's inverse-panscan)
249 # nonlinear use nonlinear
252 port = config.av.videoport.value
253 if port not in config.av.videomode:
254 print "current port not available, not setting videomode"
256 mode = config.av.videomode[port].value
258 force_widescreen = self.isWidescreenMode(port, mode)
260 is_widescreen = force_widescreen or config.av.aspect.value in ["16_9", "16_10"]
261 is_auto = config.av.aspect.value == "auto"
267 aspect = {"16_9": "16:9", "16_10": "16:10"}[config.av.aspect.value]
268 policy = {"pillarbox": "panscan", "panscan": "letterbox", "nonlinear": "nonlinear", "scale": "bestfit"}[config.av.policy_43.value]
274 policy = {"letterbox": "letterbox", "panscan": "panscan", "scale": "bestfit"}[config.av.policy_169.value]
276 if not config.av.wss.value:
277 wss = "auto(4:3_off)"
281 print "-> setting aspect, policy, wss", aspect, policy, wss
282 open("/proc/stb/video/aspect", "w").write(aspect)
283 open("/proc/stb/video/policy", "w").write(policy)
284 open("/proc/stb/denc/0/wss", "w").write(wss)
285 self.updateSlowblank()
286 self.updateFastblank()
288 def updateSlowblank(self):
290 from Components.SystemInfo import SystemInfo
291 if SystemInfo["ScartSwitch"]:
301 open("/proc/stb/avs/0/sb", "w").write(sb)
302 open("/proc/stb/avs/0/input", "w").write(input)
304 def updateStandby(self):
305 self.updateSlowblank()
306 self.updateFastblank()
308 def updateFastblank(self, *args):
310 from Components.SystemInfo import SystemInfo
311 if SystemInfo["ScartSwitch"]:
316 if self.current_port == "Scart" and config.av.colorformat.value == "rgb":
320 open("/proc/stb/avs/0/fb", "w").write(fb)
322 config.av.edid_override = ConfigYesNo(default = False)
323 video_hw = VideoHardware()
324 video_hw.setConfiguredMode()