1 from config import config, ConfigSubsection, ConfigSelection, ConfigFloat, ConfigSatlist, ConfigYesNo, ConfigInteger, ConfigSubList, ConfigNothing, ConfigSubDict, ConfigOnOff
3 from enigma import eDVBSatelliteEquipmentControl as secClass, \
4 eDVBSatelliteLNBParameters as lnbParam, \
5 eDVBSatelliteDiseqcParameters as diseqcParam, \
6 eDVBSatelliteSwitchParameters as switchParam, \
7 eDVBSatelliteRotorParameters as rotorParam
10 from xml.dom import EMPTY_NAMESPACE
11 from skin import elementsWithTag
12 from Tools import XMLTools
14 from xml.sax import make_parser
15 from xml.sax.handler import ContentHandler
17 from Tools.BoundFunction import boundFunction
19 def getConfigSatlist(orbpos, satlist):
23 default_orbpos = orbpos
25 return ConfigSatlist(satlist, default_orbpos)
27 def tryOpen(filename):
29 procFile = open(filename)
35 def addLNBSimple(self, sec, slotid, diseqcmode, toneburstmode = 0, diseqcpos = 0, orbpos = 0, longitude = 0, latitude = 0, loDirection = 0, laDirection = 0):
38 tunermask = 1 << slotid
39 if self.equal.has_key(slotid):
40 tunermask |= (1 << self.equal[slotid])
41 elif self.linked.has_key(slotid):
42 tunermask |= (1 << self.linked[slotid])
43 sec.setLNBLOFL(9750000)
44 sec.setLNBLOFH(10600000)
45 sec.setLNBThreshold(11700000)
46 sec.setLNBIncreasedVoltage(lnbParam.OFF)
50 sec.setVoltageMode(switchParam.HV)
51 sec.setToneMode(switchParam.HILO)
52 sec.setCommandOrder(0)
55 sec.setDiSEqCMode(diseqcmode)
56 sec.setToneburst(toneburstmode)
57 sec.setCommittedCommand(diseqcpos)
58 #print "set orbpos to:" + str(orbpos)
60 if 0 <= diseqcmode < 3:
61 sec.addSatellite(orbpos)
62 self.satList.append(orbpos)
63 elif (diseqcmode == 3): # diseqc 1.2
64 if self.satposdepends.has_key(slotid):
65 tunermask |= (1 << self.satposdepends[slotid])
66 sec.setLatitude(latitude)
67 sec.setLaDirection(laDirection)
68 sec.setLongitude(longitude)
69 sec.setLoDirection(loDirection)
70 sec.setUseInputpower(True)
71 sec.setInputpowerDelta(50)
73 for x in self.NimManager.satList:
74 print "Add sat " + str(x[0])
75 sec.addSatellite(int(x[0]))
78 sec.setRotorPosNum(0) # USALS
79 self.satList.append(int(x[0]))
81 sec.setLNBTunerMask(tunermask)
83 def setSatposDepends(self, sec, nim1, nim2):
84 print "tuner", nim1, "depends on satpos of", nim2
85 sec.setTunerDepends(nim1, nim2)
87 def linkNIMs(self, sec, nim1, nim2):
88 print "link tuner", nim1, "to tuner", nim2
89 sec.setTunerLinked(nim1, nim2)
95 sec = secClass.getInstance()
96 sec.clear() ## this do unlinking NIMs too !!
97 print "sec config cleared"
101 self.satposdepends = { }
104 nim_slots = self.NimManager.nim_slots
106 for slot in nim_slots:
109 if slot.isCompatible("DVB-S"):
110 # save what nim we link to/are equal to/satposdepends to.
111 # this is stored in the *value* (not index!) of the config list
112 if nim.configMode.value == "equal":
113 self.equal[int(nim.equalTo.value)]=x
114 if nim.configMode.value == "loopthrough":
115 self.linkNIMs(sec, x, int(nim.linkedTo.value))
116 self.linked[int(nim.linkedTo.value)]=x
117 elif nim.configMode.value == "satposdepends":
118 self.setSatposDepends(sec, x, int(nim.satposDependsTo.value))
119 self.satposdepends[int(nim.satposDependsTo.value)]=x
121 for slot in nim_slots:
124 if slot.isCompatible("DVB-S"):
125 print "slot: " + str(x) + " configmode: " + str(nim.configMode.value)
126 print "diseqcmode: ", nim.configMode.value
127 if nim.configMode.value in [ "loopthrough", "satposdepends", "equal", "nothing" ]:
129 elif nim.configMode.value == "simple": #simple config
130 if nim.diseqcMode.value == "single": #single
131 self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.NONE, diseqcpos = diseqcParam.SENDNO)
132 elif nim.diseqcMode.value == "toneburst_a_b": #Toneburst A/B
133 self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.A, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.SENDNO)
134 self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcB.orbital_position, toneburstmode = diseqcParam.B, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.SENDNO)
135 elif nim.diseqcMode.value == "diseqc_a_b": #DiSEqC A/B
136 self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AA)
137 self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcB.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AB)
138 elif nim.diseqcMode.value == "diseqc_a_b_c_d": #DiSEqC A/B/C/D
139 self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcA.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AA)
140 self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcB.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.AB)
141 self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcC.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.BA)
142 self.addLNBSimple(sec, slotid = x, orbpos = nim.diseqcD.orbital_position, toneburstmode = diseqcParam.NO, diseqcmode = diseqcParam.V1_0, diseqcpos = diseqcParam.BB)
143 elif nim.diseqcMode.value == "positioner": #Positioner
144 if nim.latitudeOrientation.value == "north":
145 laValue = rotorParam.NORTH
147 laValue = rotorParam.SOUTH
148 if nim.longitudeOrientation.value == "east":
149 loValue = rotorParam.EAST
151 loValue = rotorParam.WEST
152 self.addLNBSimple(sec, slotid = x, diseqcmode = 3,
153 longitude = nim.longitude.float,
154 loDirection = loValue,
155 latitude = nim.latitude.float,
156 laDirection = laValue)
157 elif nim.configMode.value == "advanced": #advanced config
158 self.updateAdvanced(sec, x)
159 print "sec config completed"
161 def updateAdvanced(self, sec, slotid):
163 for x in range(1,33):
165 for x in self.NimManager.satList:
166 lnb = int(config.Nims[slotid].advanced.sat[x[0]].lnb.value)
168 print "add", x[0], "to", lnb
169 lnbSat[lnb].append(x[0])
170 for x in range(1,33):
171 if len(lnbSat[x]) > 0:
172 currLnb = config.Nims[slotid].advanced.lnb[x]
175 tunermask = 1 << slotid
176 if self.equal.has_key(slotid):
177 tunermask |= (1 << self.equal[slotid])
178 elif self.linked.has_key(slotid):
179 tunermask |= (1 << self.linked[slotid])
181 if currLnb.lof.value == "universal_lnb":
182 sec.setLNBLOFL(9750000)
183 sec.setLNBLOFH(10600000)
184 sec.setLNBThreshold(11700000)
185 elif currLnb.lof.value == "c_band":
186 sec.setLNBLOFL(5150000)
187 sec.setLNBLOFH(5150000)
188 sec.setLNBThreshold(5150000)
189 elif currLnb.lof.value == "user_defined":
190 sec.setLNBLOFL(currLnb.lofl.value * 1000)
191 sec.setLNBLOFH(currLnb.lofh.value * 1000)
192 sec.setLNBThreshold(currLnb.threshold.value * 1000)
194 # if currLnb.output_12v.value == "0V":
195 # pass # nyi in drivers
196 # elif currLnb.output_12v.value == "12V":
197 # pass # nyi in drivers
199 if currLnb.increased_voltage.value:
200 sec.setLNBIncreasedVoltage(lnbParam.ON)
202 sec.setLNBIncreasedVoltage(lnbParam.OFF)
204 dm = currLnb.diseqcMode.value
206 sec.setDiSEqCMode(diseqcParam.NONE)
208 sec.setDiSEqCMode(diseqcParam.V1_0)
210 sec.setDiSEqCMode(diseqcParam.V1_1)
212 sec.setDiSEqCMode(diseqcParam.V1_2)
214 if self.satposdepends.has_key(slotid): # only useable with rotors
215 tunermask |= (1 << self.satposdepends[slotid])
218 if currLnb.toneburst.value == "none":
219 sec.setToneburst(diseqcParam.NO)
220 elif currLnb.toneburst.value == "A":
221 sec.setToneburst(diseqcParam.A)
222 elif currLnb.toneburst.value == "B":
223 sec.setToneburst(diseqcParam.B)
225 # Committed Diseqc Command
226 cdc = currLnb.commitedDiseqcCommand.value
228 c = { "none": diseqcParam.SENDNO,
229 "AA": diseqcParam.AA,
230 "AB": diseqcParam.AB,
231 "BA": diseqcParam.BA,
232 "BB": diseqcParam.BB }
235 sec.setCommittedCommand(c[cdc])
237 sec.setCommittedCommand(long(cdc))
239 sec.setFastDiSEqC(currLnb.fastDiseqc.value)
241 sec.setSeqRepeat(currLnb.sequenceRepeat.value)
243 if currLnb.diseqcMode.value == "1_0":
244 currCO = currLnb.commandOrder1_0.value
246 currCO = currLnb.commandOrder.value
248 udc = int(currLnb.uncommittedDiseqcCommand.value)
250 sec.setUncommittedCommand(0xF0|(udc-1))
252 sec.setUncommittedCommand(0) # SENDNO
254 sec.setRepeats({"none": 0, "one": 1, "two": 2, "three": 3}[currLnb.diseqcRepeats.value])
256 setCommandOrder = False
258 # 0 "committed, toneburst",
259 # 1 "toneburst, committed",
260 # 2 "committed, uncommitted, toneburst",
261 # 3 "toneburst, committed, uncommitted",
262 # 4 "uncommitted, committed, toneburst"
263 # 5 "toneburst, uncommitted, commmitted"
264 order_map = {"ct": 0, "tc": 1, "cut": 2, "tcu": 3, "uct": 4, "tuc": 5}
265 sec.setCommandOrder(order_map[currCO])
268 latitude = currLnb.latitude.float
269 sec.setLatitude(latitude)
270 longitude = currLnb.longitude.float
271 sec.setLongitude(longitude)
272 if currLnb.latitudeOrientation.value == "north":
273 sec.setLaDirection(rotorParam.NORTH)
275 sec.setLaDirection(rotorParam.SOUTH)
276 if currLnb.longitudeOrientation.value == "east":
277 sec.setLoDirection(rotorParam.EAST)
279 sec.setLoDirection(rotorParam.WEST)
281 if currLnb.powerMeasurement.value:
282 sec.setUseInputpower(True)
283 sec.setInputpowerDelta(currLnb.powerThreshold.value)
285 sec.setUseInputpower(False)
287 sec.setLNBTunerMask(tunermask)
289 # finally add the orbital positions
292 currSat = config.Nims[slotid].advanced.sat[y]
294 if currSat.voltage.value == "polarization":
295 sec.setVoltageMode(switchParam.HV)
296 elif currSat.voltage.value == "13V":
297 sec.setVoltageMode(switchParam._14V)
298 elif currSat.voltage.value == "18V":
299 sec.setVoltageMode(switchParam._18V)
301 if currSat.tonemode == "band":
302 sec.setToneMode(switchParam.HILO)
303 elif currSat.tonemode == "on":
304 sec.setToneMode(switchParam.ON)
305 elif currSat.tonemode == "off":
306 sec.setToneMode(switchParam.OFF)
308 if not currSat.usals.value:
309 sec.setRotorPosNum(currSat.rotorposition.value)
311 sec.setRotorPosNum(0) #USALS
313 def __init__(self, nimmgr):
314 self.NimManager = nimmgr
318 def __init__(self, slot, type, description):
321 if type not in ["DVB-S", "DVB-C", "DVB-T", "DVB-S2", None]:
322 print "warning: unknown NIM type %s, not using." % type
326 self.description = description
328 def isCompatible(self, what):
331 "DVB-S": ["DVB-S", None],
332 "DVB-C": ["DVB-C", None],
333 "DVB-T": ["DVB-T", None],
334 "DVB-S2": ["DVB-S", "DVB-S2", None]
336 return what in compatible[self.type]
338 def getSlotName(self):
339 # get a friendly description for a slot name.
340 # we name them "Tuner A/B/C/...", because that's what's usually written on the back
342 return _("Tuner ") + chr(ord('A') + self.slot)
344 slot_name = property(getSlotName)
347 return chr(ord('A') + self.slot)
349 slot_id = property(getSlotID)
351 def getFriendlyType(self):
360 friendly_type = property(getFriendlyType)
362 def getFriendlyFullDescription(self):
363 nim_text = self.slot_name + ": "
366 nim_text += _("(empty)")
368 nim_text += self.description + " (" + self.friendly_type + ")"
372 friendly_full_description = property(getFriendlyFullDescription)
373 config_mode = property(lambda self: config.Nims[self.slot].configMode.value)
374 config = property(lambda self: config.Nims[self.slot])
375 empty = property(lambda self: self.type is None)
378 class parseSats(ContentHandler):
379 def __init__(self, satList, satellites, transponders):
380 self.isPointsElement, self.isReboundsElement = 0, 0
381 self.satList = satList
382 self.satellites = satellites
383 self.transponders = transponders
385 def startElement(self, name, attrs):
387 #print "found sat " + attrs.get('name',"") + " " + str(attrs.get('position',""))
388 tpos = int(attrs.get('position',""))
391 tname = attrs.get('name',"").encode("UTF-8")
392 self.satellites[tpos] = tname
393 self.satList.append( (tpos, tname) )
394 self.parsedSat = int(tpos)
395 elif (name == "transponder"):
396 modulation = int(attrs.get('modulation',"1")) # QPSK default
397 system = int(attrs.get('system',"0")) # DVB-S default
398 freq = int(attrs.get('frequency',""))
399 sr = int(attrs.get('symbol_rate',""))
400 pol = int(attrs.get('polarization',""))
401 fec = int(attrs.get('fec_inner',"0")) # AUTO default
402 if self.parsedSat in self.transponders:
405 self.transponders[self.parsedSat] = [ ]
407 self.transponders[self.parsedSat].append((0, freq, sr, pol, fec, system, modulation))
409 class parseCables(ContentHandler):
410 def __init__(self, cablesList, transponders):
411 self.isPointsElement, self.isReboundsElement = 0, 0
412 self.cablesList = cablesList
413 for x in self.cablesList:
414 self.cablesList.remove(x)
415 self.transponders = transponders
417 def startElement(self, name, attrs):
418 if (name == "cable"):
419 #print "found sat " + attrs.get('name',"") + " " + str(attrs.get('position',""))
420 tname = attrs.get('name',"").encode("UTF-8")
421 tflags = int(attrs.get('flags',"0"))
422 self.cablesList.append((tname, tflags))
423 self.parsedCab = tname
424 elif (name == "transponder"):
425 freq = int(attrs.get('frequency',""))
428 sr = int(attrs.get('symbol_rate',"0"))
429 mod = int(attrs.get('modulation',"3")) # QAM64 default
430 fec = int(attrs.get('fec_inner',"0")) # AUTO default
431 if self.parsedCab in self.transponders:
434 self.transponders[self.parsedCab] = [ ]
435 self.transponders[self.parsedCab].append((1, freq, sr, mod, fec))
437 class parseTerrestrials(ContentHandler):
438 def __init__(self, terrestrialsList, transponders):
439 self.isPointsElement, self.isReboundsElement = 0, 0
440 self.terrestrialsList = terrestrialsList
441 self.transponders = transponders
443 def startElement(self, name, attrs):
444 if (name == "terrestrial"):
445 #print "found sat " + attrs.get('name',"") + " " + str(attrs.get('position',""))
446 tname = attrs.get('name',"").encode("UTF-8")
447 tflags = attrs.get('flags',"")
448 self.terrestrialsList.append((tname, tflags))
449 self.parsedTer = str(tname)
450 elif (name == "transponder"):
452 freq = int(attrs.get('centre_frequency',""))
453 bw = int(attrs.get('bandwidth',"3")) # AUTO
454 const = int(attrs.get('constellation',"1")) # AUTO
455 crh = int(attrs.get('code_rate_hp',"5")) # AUTO
456 if crh > 5: # our terrestrial.xml is buggy... 6 for AUTO
458 crl = int(attrs.get('code_rate_lp',"5")) # AUTO
459 if crl > 5: # our terrestrial.xml is buggy... 6 for AUTO
461 guard = int(attrs.get('guard_interval',"4")) # AUTO
462 transm = int(attrs.get('transmission_mode',"2")) # AUTO
463 hierarchy = int(attrs.get('hierarchy_information',"4")) # AUTO
464 inv = int(attrs.get('inversion',"2")) # AUTO
465 if self.parsedTer in self.transponders:
468 self.transponders[self.parsedTer] = [ ]
470 self.transponders[self.parsedTer].append((2, freq, bw, const, crh, crl, guard, transm, hierarchy, inv))
472 def getTransponders(self, pos):
473 if self.transponders.has_key(pos):
474 return self.transponders[pos]
478 def getTranspondersCable(self, nim):
479 nimConfig = config.Nims[nim]
480 if nimConfig.configMode.value != "nothing" and nimConfig.cable.scan_type.value == "provider":
481 return self.transponderscable[self.cablesList[nimConfig.cable.scan_provider.index][0]]
484 def getTranspondersTerrestrial(self, region):
485 return self.transpondersterrestrial[region]
487 def getCableDescription(self, nim):
488 return self.cablesList[config.Nims[nim].scan_provider.index][0]
490 def getCableFlags(self, nim):
491 return self.cablesList[config.Nims[nim].scan_provider.index][1]
493 def getTerrestrialDescription(self, nim):
494 return self.terrestrialsList[config.Nims[nim].terrestrial.index][0]
496 def getTerrestrialFlags(self, nim):
497 return self.terrestrialsList[config.Nims[nim].terrestrial.index][1]
499 def getConfiguredSats(self):
500 return self.sec.getSatList()
502 def getSatDescription(self, pos):
503 return self.satellites[pos]
505 def readSatsfromFile(self):
506 # read initial networks from file. we only read files which we are interested in,
507 # which means only these where a compatible tuner exists.
508 self.satellites = { }
509 self.transponders = { }
510 self.transponderscable = { }
511 self.transpondersterrestrial = { }
513 parser = make_parser()
515 if self.hasNimType("DVB-S"):
516 print "Reading satellites.xml"
517 satHandler = self.parseSats(self.satList, self.satellites, self.transponders)
518 parser.setContentHandler(satHandler)
519 parser.parse('/etc/tuxbox/satellites.xml')
521 if self.hasNimType("DVB-C"):
522 print "Reading cables.xml"
523 cabHandler = self.parseCables(self.cablesList, self.transponderscable)
524 parser.setContentHandler(cabHandler)
525 parser.parse('/etc/tuxbox/cables.xml')
527 if self.hasNimType("DVB-T"):
528 print "Reading terrestrial.xml"
529 terHandler = self.parseTerrestrials(self.terrestrialsList, self.transpondersterrestrial)
530 parser.setContentHandler(terHandler)
531 parser.parse('/etc/tuxbox/terrestrial.xml')
533 def enumerateNIMs(self):
534 # enum available NIMs. This is currently very dreambox-centric and uses the /proc/bus/nim_sockets interface.
535 # the result will be stored into nim_slots.
536 # the content of /proc/bus/nim_sockets looks like:
539 # Name: BCM4501 DVB-S2 NIM (internal)
542 # Name: BCM4501 DVB-S2 NIM (internal)
545 # Name: Philips TU1216
548 # Name: Alps BSBE1 702A
551 # Type will be either "DVB-S", "DVB-S2", "DVB-T", "DVB-C" or None.
553 nimfile = tryOpen("/proc/bus/nim_sockets")
561 for line in nimfile.readlines():
564 if line.strip().startswith("NIM Socket"):
565 parts = line.strip().split(" ")
566 current_slot = int(parts[2][:-1])
567 entries[current_slot] = {}
568 elif line.strip().startswith("Type:"):
569 entries[current_slot]["type"] = str(line.strip()[6:])
570 elif line.strip().startswith("Name:"):
571 entries[current_slot]["name"] = str(line.strip()[6:])
572 elif line.strip().startswith("empty"):
573 entries[current_slot]["type"] = None
574 entries[current_slot]["name"] = _("N/A")
577 # nim_slots is an array which has exactly one entry for each slot, even for empty ones.
580 for id, entry in entries.items():
581 if not (entry.has_key("name") and entry.has_key("type")):
582 entry["name"] = _("N/A")
584 self.nim_slots.append(NIM(slot = id, description = entry["name"], type = entry["type"]))
586 def hasNimType(self, chktype):
587 for slot in self.nim_slots:
588 if slot.isCompatible(chktype):
592 def getNimListOfType(self, type, exception = -1):
593 # returns a list of indexes for NIMs compatible to the given type, except for 'exception'
595 for x in self.nim_slots:
596 if x.isCompatible(type) and x.slot != exception:
603 self.terrestrialsList = []
605 self.readSatsfromFile()
607 InitNimManager(self) #init config stuff
609 # get a list with the friendly full description
612 for slot in self.nim_slots:
613 list.append(slot.friendly_full_description)
616 def getSatList(self):
619 def getSatListForNim(self, slotid):
621 if self.nim_slots[slotid].isCompatible("DVB-S"):
622 #print "slotid:", slotid
624 #print "self.satellites:", self.satList[config.Nims[slotid].diseqcA.index]
625 #print "diseqcA:", config.Nims[slotid].diseqcA.value
626 configMode = config.Nims[slotid].configMode.value
628 if configMode == "equal":
629 slotid=0 #FIXME add handling for more than two tuners !!!
630 configMode = config.Nims[slotid].configMode.value
632 if configMode == "simple":
633 dm = config.Nims[slotid].diseqcMode.value
634 if dm in ["single", "toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"]:
635 list.append(self.satList[config.Nims[slotid].diseqcA.index])
636 if dm in ["toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"]:
637 list.append(self.satList[config.Nims[slotid].diseqcB.index])
638 if dm == "diseqc_a_b_c_d":
639 list.append(self.satList[config.Nims[slotid].diseqcC.index])
640 list.append(self.satList[config.Nims[slotid].diseqcD.index])
641 if dm == "positioner":
642 for x in self.satList:
644 elif configMode == "advanced":
645 for x in self.satList:
646 if int(config.Nims[slotid].advanced.sat[x[0]].lnb.value) != 0:
651 def getRotorSatListForNim(self, slotid):
653 if self.nim_slots[slotid].isCompatible("DVB-S"):
654 #print "slotid:", slotid
656 #print "self.satellites:", self.satList[config.Nims[slotid].diseqcA.value]
657 #print "diseqcA:", config.Nims[slotid].diseqcA.value
658 configMode = config.Nims[slotid].configMode.value
659 if configMode == "simple":
660 if config.Nims[slotid].diseqcMode.value == "positioner":
661 for x in self.satList:
663 elif configMode == "advanced":
664 for x in self.satList:
665 nim = config.Nims[slotid]
666 lnbnum = int(nim.advanced.sat[x[0]].lnb.value)
668 lnb = nim.advanced.lnb[lnbnum]
669 if lnb.diseqcMode.value == "1_2":
674 config.sec = ConfigSubsection()
676 x = ConfigInteger(default=15, limits = (0, 9999))
677 x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_CONT_TONE, configElement.value))
678 config.sec.delay_after_continuous_tone_change = x
680 x = ConfigInteger(default=10, limits = (0, 9999))
681 x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_FINAL_VOLTAGE_CHANGE, configElement.value))
682 config.sec.delay_after_final_voltage_change = x
684 x = ConfigInteger(default=120, limits = (0, 9999))
685 x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_BETWEEN_DISEQC_REPEATS, configElement.value))
686 config.sec.delay_between_diseqc_repeats = x
688 x = ConfigInteger(default=50, limits = (0, 9999))
689 x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_LAST_DISEQC_CMD, configElement.value))
690 config.sec.delay_after_last_diseqc_command = x
692 x = ConfigInteger(default=50, limits = (0, 9999))
693 x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_TONEBURST, configElement.value))
694 config.sec.delay_after_toneburst = x
696 x = ConfigInteger(default=750, limits = (0, 9999))
697 x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_SWITCH_CMDS, configElement.value))
698 config.sec.delay_after_enable_voltage_before_switch_command = x
700 x = ConfigInteger(default=700, limits = (0, 9999))
701 x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_BETWEEN_SWITCH_AND_MOTOR_CMD, configElement.value))
702 config.sec.delay_between_switch_and_motor_command = x
704 x = ConfigInteger(default=150, limits = (0, 9999))
705 x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MEASURE_IDLE_INPUTPOWER, configElement.value))
706 config.sec.delay_after_voltage_change_before_measure_idle_inputpower = x
708 x = ConfigInteger(default=750, limits = (0, 9999))
709 x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_ENABLE_VOLTAGE_BEFORE_MOTOR_CMD, configElement.value))
710 config.sec.delay_after_enable_voltage_before_motor_command = x
712 x = ConfigInteger(default=150, limits = (0, 9999))
713 x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_MOTOR_STOP_CMD, configElement.value))
714 config.sec.delay_after_motor_stop_command = x
716 x = ConfigInteger(default=150, limits = (0, 9999))
717 x.addNotifier(lambda configElement: secClass.setParam(secClass.DELAY_AFTER_VOLTAGE_CHANGE_BEFORE_MOTOR_CMD, configElement.value))
718 config.sec.delay_after_voltage_change_before_motor_command = x
720 x = ConfigInteger(default=120, limits = (0, 9999))
721 x.addNotifier(lambda configElement: secClass.setParam(secClass.MOTOR_RUNNING_TIMEOUT, configElement.value))
722 config.sec.motor_running_timeout = x
724 x = ConfigInteger(default=1, limits = (0, 5))
725 x.addNotifier(lambda configElement: secClass.setParam(secClass.MOTOR_COMMAND_RETRIES, configElement.value))
726 config.sec.motor_command_retries = x
728 def InitNimManager(nimmgr):
731 config.Nims = ConfigSubList()
732 for x in range(len(nimmgr.nim_slots)):
733 config.Nims.append(ConfigSubsection())
735 for slot in nimmgr.nim_slots:
739 # HACK: currently, we can only looptrough to socket A
741 if slot.isCompatible("DVB-S"):
743 nim.configMode = ConfigSelection(
745 "simple": _("simple"),
746 "advanced": _("advanced"),
747 "nothing": _("nothing connected"),
751 nim.configMode = ConfigSelection(
753 "equal": _("equal to Socket A"),
754 "loopthrough": _("loopthrough to socket A"),
755 "nothing": _("nothing connected"),
756 "satposdepends": _("second cable of motorized LNB"),
757 "simple": _("simple"),
758 "advanced": _("advanced")},
759 default = "loopthrough")
761 #important - check if just the 2nd one is LT only and the first one is DVB-S
762 # CHECKME: is this logic correct for >2 slots?
763 if nim.configMode.value in ["loopthrough", "satposdepends", "equal"]:
764 if x == 0: # first one can never be linked to anything
766 nim.configMode.value = "simple"
767 nim.configMode.save()
769 #FIXME: make it better
770 for y in nimmgr.nim_slots:
772 if not y.isCompatible("DVB-S"):
774 nim.configMode.value = "simple"
775 nim.configMode.save()
777 nim.diseqcMode = ConfigSelection(
779 ("single", _("Single")),
780 ("toneburst_a_b", _("Toneburst A/B")),
781 ("diseqc_a_b", _("DiSEqC A/B")),
782 ("diseqc_a_b_c_d", _("DiSEqC A/B/C/D")),
783 ("positioner", _("Positioner"))],
784 default = "diseqc_a_b")
786 nim.diseqcA = getConfigSatlist(192, nimmgr.satList)
787 nim.diseqcB = getConfigSatlist(130, nimmgr.satList)
788 nim.diseqcC = ConfigSatlist(list = nimmgr.satList)
789 nim.diseqcD = ConfigSatlist(list = nimmgr.satList)
790 nim.positionerMode = ConfigSelection(
792 ("usals", _("USALS")),
793 ("manual", _("manual"))],
795 nim.longitude = ConfigFloat(default=[5,100], limits=[(0,359),(0,999)])
796 nim.longitudeOrientation = ConfigSelection(choices={"east": _("East"), "west": _("West")}, default = "east")
797 nim.latitude = ConfigFloat(default=[50,767], limits=[(0,359),(0,999)])
798 nim.latitudeOrientation = ConfigSelection(choices={"north": _("North"), "south": _("South")}, default="north")
800 # get other frontends of the same type
801 satNimList = nimmgr.getNimListOfType(slot.type, slot.slot)
805 n = nimmgr.nim_slots[x]
806 satNimListNames["%d" % n.slot] = n.friendly_full_description
808 if len(satNimListNames):
809 nim.equalTo = ConfigSelection(choices = satNimListNames)
810 nim.linkedTo = ConfigSelection(choices = satNimListNames)
811 nim.satposDependsTo = ConfigSelection(choices = satNimListNames)
814 nim.advanced = ConfigSubsection()
815 nim.advanced.sats = getConfigSatlist(192,nimmgr.satList)
816 nim.advanced.sat = ConfigSubDict()
817 lnbs = [("0", "not available")]
818 for y in range(1, 33):
819 lnbs.append((str(y), "LNB " + str(y)))
821 for x in nimmgr.satList:
822 nim.advanced.sat[x[0]] = ConfigSubsection()
823 nim.advanced.sat[x[0]].voltage = ConfigSelection(choices={"polarization": _("Polarization"), "13V": _("13 V"), "18V": _("18 V")}, default = "polarization")
824 nim.advanced.sat[x[0]].tonemode = ConfigSelection(choices={"band": _("Band"), "on": _("On"), "off": _("Off")}, default = "band")
825 nim.advanced.sat[x[0]].usals = ConfigYesNo(default=True)
826 nim.advanced.sat[x[0]].rotorposition = ConfigInteger(default=1, limits=(1, 255))
827 nim.advanced.sat[x[0]].lnb = ConfigSelection(choices = lnbs)
829 csw = [("none", _("None")), ("AA", _("AA")), ("AB", _("AB")), ("BA", _("BA")), ("BB", _("BB"))]
830 for y in range(0, 16):
831 csw.append((str(0xF0|y), "Input " + str(y+1)))
833 ucsw = [("0", _("None"))]
834 for y in range(1, 17):
835 ucsw.append((str(y), "Input " + str(y)))
837 nim.advanced.lnb = ConfigSubList()
838 nim.advanced.lnb.append(ConfigNothing())
839 for x in range(1, 33):
840 nim.advanced.lnb.append(ConfigSubsection())
841 nim.advanced.lnb[x].lof = ConfigSelection(choices={"universal_lnb": _("Universal LNB"), "c_band": _("C-Band"), "user_defined": _("User defined")}, default="universal_lnb")
842 nim.advanced.lnb[x].lofl = ConfigInteger(default=9750, limits = (0, 99999))
843 nim.advanced.lnb[x].lofh = ConfigInteger(default=10600, limits = (0, 99999))
844 nim.advanced.lnb[x].threshold = ConfigInteger(default=11700, limits = (0, 99999))
845 # nim.advanced.lnb[x].output_12v = ConfigSelection(choices = [("0V", _("0 V")), ("12V", _("12 V"))], default="0V")
846 nim.advanced.lnb[x].increased_voltage = ConfigYesNo(default=False)
847 nim.advanced.lnb[x].toneburst = ConfigSelection(choices = [("none", _("None")), ("A", _("A")), ("B", _("B"))], default = "none")
848 nim.advanced.lnb[x].diseqcMode = ConfigSelection(choices = [("none", _("None")), ("1_0", _("1.0")), ("1_1", _("1.1")), ("1_2", _("1.2"))], default = "none")
849 nim.advanced.lnb[x].commitedDiseqcCommand = ConfigSelection(choices = csw)
850 nim.advanced.lnb[x].fastDiseqc = ConfigYesNo(default=False)
851 nim.advanced.lnb[x].sequenceRepeat = ConfigYesNo(default=False)
852 nim.advanced.lnb[x].commandOrder1_0 = ConfigSelection(choices = [("ct", "committed, toneburst"), ("tc", "toneburst, committed")], default = "ct")
853 nim.advanced.lnb[x].commandOrder = ConfigSelection(choices = [
854 ("ct", "committed, toneburst"),
855 ("tc", "toneburst, committed"),
856 ("cut", "committed, uncommitted, toneburst"),
857 ("tcu", "toneburst, committed, uncommitted"),
858 ("uct", "uncommitted, committed, toneburst"),
859 ("tuc", "toneburst, uncommitted, commmitted")],
861 nim.advanced.lnb[x].uncommittedDiseqcCommand = ConfigSelection(choices = ucsw)
862 nim.advanced.lnb[x].diseqcRepeats = ConfigSelection(choices = [("none", _("None")), ("one", _("One")), ("two", _("Two")), ("three", _("Three"))], default = "none")
863 nim.advanced.lnb[x].longitude = ConfigFloat(default = [5,100], limits = [(0,359),(0,999)])
864 nim.advanced.lnb[x].longitudeOrientation = ConfigSelection(choices = [("east", _("East")), ("west", _("West"))], default = "east")
865 nim.advanced.lnb[x].latitude = ConfigFloat(default = [50,767], limits = [(0,359),(0,999)])
866 nim.advanced.lnb[x].latitudeOrientation = ConfigSelection(choices = [("north", _("North")), ("south", _("South"))], default = "north")
867 nim.advanced.lnb[x].powerMeasurement = ConfigYesNo(default=True)
868 nim.advanced.lnb[x].powerThreshold = ConfigInteger(default=50, limits=(0, 100))
870 elif slot.isCompatible("DVB-C"):
871 nim.configMode = ConfigSelection(
873 "enabled": _("enabled"),
874 "nothing": _("nothing connected"),
879 for x in nimmgr.cablesList:
880 list.append((str(n), x[0]))
882 nim.cable = ConfigSubsection()
883 possible_scan_types = [("bands", _("Frequency bands")), ("steps", _("Frequency steps"))]
885 possible_scan_types.append(("provider", _("Provider")))
886 nim.cable.scan_type = ConfigSelection(default = "bands", choices = possible_scan_types)
887 nim.cable.scan_provider = ConfigSelection(default = "0", choices = list)
888 nim.cable.scan_band_EU_VHF_I = ConfigYesNo(default = True)
889 nim.cable.scan_band_EU_MID = ConfigYesNo(default = True)
890 nim.cable.scan_band_EU_VHF_III = ConfigYesNo(default = True)
891 nim.cable.scan_band_EU_UHF_IV = ConfigYesNo(default = True)
892 nim.cable.scan_band_EU_UHF_V = ConfigYesNo(default = True)
893 nim.cable.scan_band_EU_SUPER = ConfigYesNo(default = True)
894 nim.cable.scan_band_EU_HYPER = ConfigYesNo(default = True)
895 nim.cable.scan_band_US_LOW = ConfigYesNo(default = False)
896 nim.cable.scan_band_US_MID = ConfigYesNo(default = False)
897 nim.cable.scan_band_US_HIGH = ConfigYesNo(default = False)
898 nim.cable.scan_band_US_SUPER = ConfigYesNo(default = False)
899 nim.cable.scan_band_US_HYPER = ConfigYesNo(default = False)
900 nim.cable.scan_frequency_steps = ConfigInteger(default = 1000, limits = (1000, 10000))
901 nim.cable.scan_mod_qam16 = ConfigYesNo(default = False)
902 nim.cable.scan_mod_qam32 = ConfigYesNo(default = False)
903 nim.cable.scan_mod_qam64 = ConfigYesNo(default = True)
904 nim.cable.scan_mod_qam128 = ConfigYesNo(default = False)
905 nim.cable.scan_mod_qam256 = ConfigYesNo(default = True)
906 nim.cable.scan_sr_6900 = ConfigYesNo(default = True)
907 nim.cable.scan_sr_6875 = ConfigYesNo(default = True)
908 nim.cable.scan_sr_ext1 = ConfigInteger(default = 0, limits = (0, 7230))
909 nim.cable.scan_sr_ext2 = ConfigInteger(default = 0, limits = (0, 7230))
910 elif slot.isCompatible("DVB-T"):
911 nim.configMode = ConfigSelection(
913 "enabled": _("enabled"),
914 "nothing": _("nothing connected"),
919 for x in nimmgr.terrestrialsList:
920 list.append((str(n), x[0]))
922 nim.terrestrial = ConfigSelection(choices = list)
923 nim.terrestrial_5V = ConfigOnOff()
925 nim.configMode = ConfigSelection(choices = { "nothing": _("disabled") }, default="nothing");
926 print "pls add support for this frontend type!"
929 nimmgr.sec = SecConfigure(nimmgr)
931 nimmanager = NimManager()