code.vuplus.com Git - vuplus_dvbapp/blob - lib/dvb/sec.h

   1 #ifndef __dvb_sec_h
   2 #define __dvb_sec_h
   3
   4 #include <lib/dvb/idvb.h>
   5 #include <list>
   6
   7 #ifndef SWIG
   8 class eSecCommand
   9 {
  10 public:
  11         enum { modeStatic, modeDynamic };
  12         enum {
  13                 NONE, SLEEP, SET_VOLTAGE, SET_TONE, GOTO,
  14                 SEND_DISEQC, SEND_TONEBURST, SET_FRONTEND,
  15                 SET_TIMEOUT, IF_TIMEOUT_GOTO,
  16                 IF_VOLTAGE_GOTO, IF_NOT_VOLTAGE_GOTO,
  17                 SET_POWER_LIMITING_MODE,
  18                 SET_ROTOR_DISEQC_RETRYS, IF_NO_MORE_ROTOR_DISEQC_RETRYS_GOTO,
  19                 MEASURE_IDLE_INPUTPOWER, MEASURE_RUNNING_INPUTPOWER,
  20                 IF_MEASURE_IDLE_WAS_NOT_OK_GOTO, IF_INPUTPOWER_DELTA_GOTO,
  21                 UPDATE_CURRENT_ROTORPARAMS, INVALIDATE_CURRENT_ROTORPARMS,
  22                 IF_ROTORPOS_VALID_GOTO,
  23                 IF_TUNER_LOCKED_GOTO,
  24                 START_TUNE_TIMEOUT
  25         };
  26         int cmd;
  27         struct rotor
  28         {
  29                 int deltaA;   // difference in mA between running and stopped rotor
  30                 int okcount;  // counter
  31                 int steps;    // goto steps
  32                 int direction;
  33         };
  34         struct pair
  35         {
  36                 int voltage;
  37                 int steps;
  38         };
  39         union
  40         {
  41                 int val;
  42                 int steps;
  43                 int timeout;
  44                 int voltage;
  45                 int tone;
  46                 int toneburst;
  47                 int msec;
  48                 int mode;
  49                 rotor measure;
  50                 eDVBDiseqcCommand diseqc;
  51                 pair compare;
  52         };
  53         eSecCommand( int cmd )
  54                 :cmd(cmd)
  55         {}
  56         eSecCommand( int cmd, int val )
  57                 :cmd(cmd), val(val)
  58         {}
  59         eSecCommand( int cmd, eDVBDiseqcCommand diseqc )
  60                 :cmd(cmd), diseqc(diseqc)
  61         {}
  62         eSecCommand( int cmd, rotor measure )
  63                 :cmd(cmd), measure(measure)
  64         {}
  65         eSecCommand( int cmd, pair compare )
  66                 :cmd(cmd), compare(compare)
  67         {}
  68         eSecCommand()
  69                 :cmd(NONE)
  70         {}
  71 };
  72
  73 class eSecCommandList
  74 {
  75         typedef std::list<eSecCommand> List;
  76         List secSequence;
  77 public:
  78         typedef List::iterator iterator;
  79 private:
  80         iterator cur;
  81 public:
  82         eSecCommandList()
  83                 :cur(secSequence.end())
  84         {
  85         }
  86         void push_front(const eSecCommand &cmd)
  87         {
  88                 secSequence.push_front(cmd);
  89         }
  90         void push_back(const eSecCommand &cmd)
  91         {
  92                 secSequence.push_back(cmd);
  93         }
  94         void clear()
  95         {
  96                 secSequence.clear();
  97                 cur=secSequence.end();
  98         }
  99         inline iterator &current()
 100         {
 101                 return cur;
 102         }
 103         inline iterator begin()
 104         {
 105                 return secSequence.begin();
 106         }
 107         inline iterator end()
 108         {
 109                 return secSequence.end();
 110         }
 111         int size() const
 112         {
 113                 return secSequence.size();
 114         }
 115         operator bool() const
 116         {
 117                 return secSequence.size();
 118         }
 119 };
 120 #endif
 121
 122 class eDVBSatelliteDiseqcParameters
 123 {
 124 #ifdef SWIG
 125         eDVBSatelliteDiseqcParameters();
 126         ~eDVBSatelliteDiseqcParameters();
 127 #endif
 128 public:
 129         enum { AA=0, AB=1, BA=2, BB=3, SENDNO=4 /* and 0xF0 .. 0xFF*/  };       // DiSEqC Parameter
 130         enum t_diseqc_mode { NONE=0, V1_0=1, V1_1=2, V1_2=3, SMATV=4 }; // DiSEqC Mode
 131         enum t_toneburst_param { NO=0, A=1, B=2 };
 132 #ifndef SWIG
 133         __u8 m_committed_cmd;
 134         t_diseqc_mode m_diseqc_mode;
 135         t_toneburst_param m_toneburst_param;
 136
 137         __u8 m_repeats; // for cascaded switches
 138         bool m_use_fast;        // send no DiSEqC on H/V or Lo/Hi change
 139         bool m_seq_repeat;      // send the complete DiSEqC Sequence twice...
 140         __u8 m_command_order;
 141         /*      diseqc 1.0)
 142                         0) commited, toneburst
 143                         1) toneburst, committed
 144                 diseqc > 1.0)
 145                         2) committed, uncommitted, toneburst
 146                         3) toneburst, committed, uncommitted
 147                         4) uncommitted, committed, toneburst
 148                         5) toneburst, uncommitted, committed */
 149         __u8 m_uncommitted_cmd; // state of the 4 uncommitted switches..
 150 #endif
 151 };
 152
 153 class eDVBSatelliteSwitchParameters
 154 {
 155 #ifdef SWIG
 156         eDVBSatelliteSwitchParameters();
 157         ~eDVBSatelliteSwitchParameters();
 158 #endif
 159 public:
 160         enum t_22khz_signal {   HILO=0, ON=1, OFF=2     }; // 22 Khz
 161         enum t_voltage_mode     {       HV=0, _14V=1, _18V=2, _0V=3 }; // 14/18 V
 162 #ifndef SWIG
 163         t_voltage_mode m_voltage_mode;
 164         t_22khz_signal m_22khz_signal;
 165         __u8 m_rotorPosNum; // 0 is disable.. then use gotoxx
 166 #endif
 167 };
 168
 169 class eDVBSatelliteRotorParameters
 170 {
 171 #ifdef SWIG
 172         eDVBSatelliteRotorParameters();
 173         ~eDVBSatelliteRotorParameters();
 174 #endif
 175 public:
 176         enum { NORTH, SOUTH, EAST, WEST };
 177 #ifndef SWIG
 178         eDVBSatelliteRotorParameters() { setDefaultOptions(); }
 179
 180         struct eDVBSatelliteRotorInputpowerParameters
 181         {
 182                 bool m_use;     // can we use rotor inputpower to detect rotor running state ?
 183                 __u8 m_delta;   // delta between running and stopped rotor
 184         };
 185         eDVBSatelliteRotorInputpowerParameters m_inputpower_parameters;
 186
 187         struct eDVBSatelliteRotorGotoxxParameters
 188         {
 189                 __u8 m_lo_direction;    // EAST, WEST
 190                 __u8 m_la_direction;    // NORT, SOUTH
 191                 double m_longitude;     // longitude for gotoXX? function
 192                 double m_latitude;      // latitude for gotoXX? function
 193         };
 194         eDVBSatelliteRotorGotoxxParameters m_gotoxx_parameters;
 195
 196         void setDefaultOptions() // set default rotor options
 197         {
 198                 m_inputpower_parameters.m_use = true;
 199                 m_inputpower_parameters.m_delta = 60;
 200                 m_gotoxx_parameters.m_lo_direction = EAST;
 201                 m_gotoxx_parameters.m_la_direction = NORTH;
 202                 m_gotoxx_parameters.m_longitude = 0.0;
 203                 m_gotoxx_parameters.m_latitude = 0.0;
 204         }
 205 #endif
 206 };
 207
 208 class eDVBSatelliteLNBParameters
 209 {
 210 #ifdef SWIG
 211         eDVBSatelliteLNBParameters();
 212         ~eDVBSatelliteLNBParameters();
 213 #endif
 214 public:
 215         enum t_12V_relais_state { OFF=0, ON };
 216 #ifndef SWIG
 217         t_12V_relais_state m_12V_relais_state;  // 12V relais output on/off
 218
 219         __u8 tuner_mask; // useable by tuner ( 1 | 2 | 4...)
 220
 221         unsigned int m_lof_hi,  // for 2 band universal lnb 10600 Mhz (high band offset frequency)
 222                                 m_lof_lo,       // for 2 band universal lnb  9750 Mhz (low band offset frequency)
 223                                 m_lof_threshold;        // for 2 band universal lnb 11750 Mhz (band switch frequency)
 224
 225         bool m_increased_voltage; // use increased voltage ( 14/18V )
 226
 227         std::map<int, eDVBSatelliteSwitchParameters> m_satellites;
 228         eDVBSatelliteDiseqcParameters m_diseqc_parameters;
 229         eDVBSatelliteRotorParameters m_rotor_parameters;
 230 #endif
 231 };
 232
 233 class eDVBRegisteredFrontend;
 234
 235 class eDVBSatelliteEquipmentControl: public iDVBSatelliteEquipmentControl
 236 {
 237 #ifndef SWIG
 238         static eDVBSatelliteEquipmentControl *instance;
 239         eDVBSatelliteLNBParameters m_lnbs[128]; // i think its enough
 240         int m_lnbidx; // current index for set parameters
 241         std::map<int, eDVBSatelliteSwitchParameters>::iterator m_curSat;
 242         eSmartPtrList<eDVBRegisteredFrontend> &m_avail_frontends;
 243         bool m_rotorMoving;
 244 #endif
 245 #ifdef SWIG
 246         eDVBSatelliteEquipmentControl();
 247         ~eDVBSatelliteEquipmentControl();
 248 #endif
 249         // helper function for setTunerLinked and setTunerDepends
 250         RESULT setDependencyPointers( int no1, int no2, int dest_data_byte );
 251 public:
 252 #ifndef SWIG
 253         eDVBSatelliteEquipmentControl(eSmartPtrList<eDVBRegisteredFrontend> &avail_frontends);
 254         DECLARE_REF(eDVBSatelliteEquipmentControl);
 255         RESULT prepare(iDVBFrontend &frontend, FRONTENDPARAMETERS &parm, const eDVBFrontendParametersSatellite &sat, int frontend_id);
 256         int canTune(const eDVBFrontendParametersSatellite &feparm, iDVBFrontend *, int frontend_id);
 257         bool currentLNBValid() { return m_lnbidx > -1 && m_lnbidx < (int)(sizeof(m_lnbs) / sizeof(eDVBSatelliteLNBParameters)); }
 258 #endif
 259         static eDVBSatelliteEquipmentControl *getInstance() { return instance; }
 260         RESULT clear();
 261 /* LNB Specific Parameters */
 262         RESULT addLNB();
 263         RESULT setLNBTunerMask(int tunermask);
 264         RESULT setLNBLOFL(int lofl);
 265         RESULT setLNBLOFH(int lofh);
 266         RESULT setLNBThreshold(int threshold);
 267         RESULT setLNBIncreasedVoltage(bool onoff);
 268 /* DiSEqC Specific Parameters */
 269         RESULT setDiSEqCMode(int diseqcmode);
 270         RESULT setToneburst(int toneburst);
 271         RESULT setRepeats(int repeats);
 272         RESULT setCommittedCommand(int command);
 273         RESULT setUncommittedCommand(int command);
 274         RESULT setCommandOrder(int order);
 275         RESULT setFastDiSEqC(bool onoff);
 276         RESULT setSeqRepeat(bool onoff); // send the complete switch sequence twice (without rotor command)
 277 /* Rotor Specific Parameters */
 278         RESULT setLongitude(float longitude);
 279         RESULT setLatitude(float latitude);
 280         RESULT setLoDirection(int direction);
 281         RESULT setLaDirection(int direction);
 282         RESULT setUseInputpower(bool onoff);
 283         RESULT setInputpowerDelta(int delta);  // delta between running and stopped rotor
 284 /* Satellite Specific Parameters */
 285         RESULT addSatellite(int orbital_position);
 286         RESULT setVoltageMode(int mode);
 287         RESULT setToneMode(int mode);
 288         RESULT setRotorPosNum(int rotor_pos_num);
 289 /* Tuner Specific Parameters */
 290         RESULT setTunerLinked(int from, int to);
 291         RESULT setTunerDepends(int from, int to);
 292
 293         PyObject *get_different_satellites(int tu1, int tu2);
 294         void setRotorMoving(bool); // called from the frontend's
 295         bool isRotorMoving();
 296 };
 297
 298 #endif