From 55acada06b6e0a678e8d45334a395ba28ce506a6 Mon Sep 17 00:00:00 2001 From: Koen Kooi Date: Fri, 13 Jun 2008 15:04:03 +0000 Subject: [PATCH] u-boot: add TI 1.1.4 for beagleboard and Steve's 1.3.x git version --- packages/u-boot/u-boot-git/.mtn2git_empty | 0 .../u-boot/u-boot-git/beagleboard/.mtn2git_empty | 0 .../u-boot/u-boot-git/beagleboard/armv7-a.patch | 11 + packages/u-boot/u-boot-git/beagleboard/base.patch | 7030 ++++++++++++++++++++ packages/u-boot/u-boot-git/beagleboard/name.patch | 14 + .../u-boot-omap3beagleboard-1.1.4/.mtn2git_empty | 0 .../500mhz-l2enable.patch | 42 + .../u-boot-omap3beagleboard-1.1.4/armv7-a.patch | 11 + .../disable-tone-logo.patch | 46 + .../u-boot/u-boot-omap3beagleboard-1.1.4/env.patch | 13 + .../u-boot-omap3beagleboard-1.1.4/name.patch | 13 + packages/u-boot/u-boot-omap3beagleboard_1.1.4.bb | 16 + packages/u-boot/u-boot_git.bb | 9 +- 13 files changed, 7203 insertions(+), 2 deletions(-) create mode 100644 packages/u-boot/u-boot-git/.mtn2git_empty create mode 100644 packages/u-boot/u-boot-git/beagleboard/.mtn2git_empty create mode 100644 packages/u-boot/u-boot-git/beagleboard/armv7-a.patch create mode 100644 packages/u-boot/u-boot-git/beagleboard/base.patch create mode 100644 packages/u-boot/u-boot-git/beagleboard/name.patch create mode 100644 packages/u-boot/u-boot-omap3beagleboard-1.1.4/.mtn2git_empty create mode 100644 packages/u-boot/u-boot-omap3beagleboard-1.1.4/500mhz-l2enable.patch create mode 100644 packages/u-boot/u-boot-omap3beagleboard-1.1.4/armv7-a.patch create mode 100644 packages/u-boot/u-boot-omap3beagleboard-1.1.4/disable-tone-logo.patch create mode 100644 packages/u-boot/u-boot-omap3beagleboard-1.1.4/env.patch create mode 100644 packages/u-boot/u-boot-omap3beagleboard-1.1.4/name.patch create mode 100644 packages/u-boot/u-boot-omap3beagleboard_1.1.4.bb diff --git a/packages/u-boot/u-boot-git/.mtn2git_empty b/packages/u-boot/u-boot-git/.mtn2git_empty new file mode 100644 index 0000000..e69de29 diff --git a/packages/u-boot/u-boot-git/beagleboard/.mtn2git_empty b/packages/u-boot/u-boot-git/beagleboard/.mtn2git_empty new file mode 100644 index 0000000..e69de29 diff --git a/packages/u-boot/u-boot-git/beagleboard/armv7-a.patch b/packages/u-boot/u-boot-git/beagleboard/armv7-a.patch new file mode 100644 index 0000000..49f8de0 --- /dev/null +++ b/packages/u-boot/u-boot-git/beagleboard/armv7-a.patch @@ -0,0 +1,11 @@ +--- u-boot/cpu/omap3/config.mk-orig 2008-05-27 16:46:45.000000000 -0700 ++++ u-boot/cpu/omap3/config.mk 2008-05-29 12:50:49.000000000 -0700 +@@ -23,7 +23,7 @@ + PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ + -msoft-float + +-PLATFORM_CPPFLAGS += -march=armv7a ++PLATFORM_CPPFLAGS += -march=armv7-a + # ========================================================================= + # + # Supply options according to compiler version diff --git a/packages/u-boot/u-boot-git/beagleboard/base.patch b/packages/u-boot/u-boot-git/beagleboard/base.patch new file mode 100644 index 0000000..a5f1182 --- /dev/null +++ b/packages/u-boot/u-boot-git/beagleboard/base.patch @@ -0,0 +1,7030 @@ +diff --git a/Makefile b/Makefile +index cc988e1..16701c5 100644 +--- a/Makefile ++++ b/Makefile +@@ -141,7 +141,7 @@ ifeq ($(ARCH),ppc) + CROSS_COMPILE = ppc_8xx- + endif + ifeq ($(ARCH),arm) +-CROSS_COMPILE = arm-linux- ++CROSS_COMPILE = arm-none-linux-gnueabi- + endif + ifeq ($(ARCH),i386) + CROSS_COMPILE = i386-linux- +@@ -252,7 +252,7 @@ LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a + LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) + + # Add GCC lib +-PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc ++PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc -lgcc_eh + + # The "tools" are needed early, so put this first + # Don't include stuff already done in $(LIBS) +@@ -2562,6 +2562,12 @@ SMN42_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 + + ######################################################################### ++## ARM CORTEX Systems ++######################################################################### ++omap3530beagle_config : unconfig ++ @./mkconfig $(@:_config=) arm omap3 omap3530beagle ++ ++######################################################################### + ## XScale Systems + ######################################################################### + +diff --git a/board/omap3530beagle/Makefile b/board/omap3530beagle/Makefile +new file mode 100644 +index 0000000..7065345 +--- /dev/null ++++ b/board/omap3530beagle/Makefile +@@ -0,0 +1,47 @@ ++# ++# (C) Copyright 2000, 2001, 2002 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := omap3530beagle.o mem.o clock.o syslib.o sys_info.o nand.o ++SOBJS := lowlevel_init.o ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $^ ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +diff --git a/board/omap3530beagle/clock.c b/board/omap3530beagle/clock.c +new file mode 100644 +index 0000000..964525b +--- /dev/null ++++ b/board/omap3530beagle/clock.c +@@ -0,0 +1,316 @@ ++/* ++ * (C) Copyright 2008 ++ * Texas Instruments, ++ * ++ * Author : ++ * Sunil Kumar ++ * Shashi Ranjan ++ * ++ * Derived from Beagle Board and OMAP3 SDP code by ++ * Richard Woodruff ++ * Syed Mohammed Khasim ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/****************************************************************************** ++ * get_sys_clk_speed() - determine reference oscillator speed ++ * based on known 32kHz clock and gptimer. ++ *****************************************************************************/ ++u32 get_osc_clk_speed(void) ++{ ++ u32 start, cstart, cend, cdiff, val; ++ ++ val = __raw_readl(PRM_CLKSRC_CTRL); ++ ++ /* If SYS_CLK is being divided by 2, remove for now */ ++ val = (val & (~BIT7)) | BIT6; ++ __raw_writel(val, PRM_CLKSRC_CTRL); ++ ++ /* enable timer2 */ ++ val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; ++ __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ ++ ++ /* Enable I and F Clocks for GPT1 */ ++ val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; ++ __raw_writel(val, CM_ICLKEN_WKUP); ++ val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; ++ __raw_writel(val, CM_FCLKEN_WKUP); ++ ++ __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ ++ __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ ++ ++ /* enable 32kHz source, determine sys_clk via gauging */ ++ start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ ++ while (__raw_readl(S32K_CR) < start) ; /* dead loop till start time */ ++ /* get start sys_clk count */ ++ cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); ++ /* wait for 40 cycles */ ++ while (__raw_readl(S32K_CR) < (start + 20)) ; ++ cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ ++ cdiff = cend - cstart; /* get elapsed ticks */ ++ ++ /* based on number of ticks assign speed */ ++ if (cdiff > 19000) ++ return (S38_4M); ++ else if (cdiff > 15200) ++ return (S26M); ++ else if (cdiff > 13000) ++ return (S24M); ++ else if (cdiff > 9000) ++ return (S19_2M); ++ else if (cdiff > 7600) ++ return (S13M); ++ else ++ return (S12M); ++} ++ ++/****************************************************************************** ++ * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on ++ * input oscillator clock frequency. ++ *****************************************************************************/ ++void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) ++{ ++ if (osc_clk == S38_4M) ++ *sys_clkin_sel = 4; ++ else if (osc_clk == S26M) ++ *sys_clkin_sel = 3; ++ else if (osc_clk == S19_2M) ++ *sys_clkin_sel = 2; ++ else if (osc_clk == S13M) ++ *sys_clkin_sel = 1; ++ else if (osc_clk == S12M) ++ *sys_clkin_sel = 0; ++} ++ ++/****************************************************************************** ++ * prcm_init() - inits clocks for PRCM as defined in clocks.h ++ * called from SRAM, or Flash (using temp SRAM stack). ++ *****************************************************************************/ ++void prcm_init(void) ++{ ++ void (*f_lock_pll) (u32, u32, u32, u32); ++ int xip_safe, p0, p1, p2, p3; ++ u32 osc_clk = 0, sys_clkin_sel; ++ u32 clk_index, sil_index; ++ dpll_param *dpll_param_p; ++ ++ f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + ++ SRAM_VECT_CODE); ++ ++ xip_safe = running_in_sram(); ++ ++ /* Gauge the input clock speed and find out the sys_clkin_sel ++ * value corresponding to the input clock. ++ */ ++ osc_clk = get_osc_clk_speed(); ++ get_sys_clkin_sel(osc_clk, &sys_clkin_sel); ++ ++ sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ ++ ++ /* If the input clock is greater than 19.2M always divide/2 */ ++ if (sys_clkin_sel > 2) { ++ sr32(PRM_CLKSRC_CTRL, 6, 2, 2); /* input clock divider */ ++ clk_index = sys_clkin_sel / 2; ++ } else { ++ sr32(PRM_CLKSRC_CTRL, 6, 2, 1); /* input clock divider */ ++ clk_index = sys_clkin_sel; ++ } ++ ++ /* The DPLL tables are defined according to sysclk value and ++ * silicon revision. The clk_index value will be used to get ++ * the values for that input sysclk from the DPLL param table ++ * and sil_index will get the values for that SysClk for the ++ * appropriate silicon rev. ++ */ ++ sil_index = get_cpu_rev() - 1; ++ /* Unlock MPU DPLL (slows things down, and needed later) */ ++ sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); ++ wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); ++ ++ /* Getting the base address of Core DPLL param table */ ++ dpll_param_p = (dpll_param *) get_core_dpll_param(); ++ /* Moving it to the right sysclk and ES rev base */ ++ dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; ++ if (xip_safe) { ++ /* CORE DPLL */ ++ /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ ++ sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); ++ wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); ++ /* For OMAP3 ES1.0 Errata 1.50, default value directly doesnt ++ work. write another value and then default value. */ ++ sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */ ++ sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ ++ sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ ++ sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ ++ sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ ++ sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ ++ sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ ++ sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ ++ sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ ++ sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ ++ sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ ++ sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ ++ sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ ++ sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ ++ wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); ++ } else if (running_in_flash()) { ++ /* if running from flash, jump to small relocated code ++ area in SRAM. */ ++ p0 = __raw_readl(CM_CLKEN_PLL); ++ sr32((u32) &p0, 0, 3, PLL_FAST_RELOCK_BYPASS); ++ sr32((u32) &p0, 4, 4, dpll_param_p->fsel); /* FREQSEL */ ++ ++ p1 = __raw_readl(CM_CLKSEL1_PLL); ++ sr32((u32) &p1, 27, 2, dpll_param_p->m2); /* Set M2 */ ++ sr32((u32) &p1, 16, 11, dpll_param_p->m); /* Set M */ ++ sr32((u32) &p1, 8, 7, dpll_param_p->n); /* Set N */ ++ sr32((u32) &p1, 6, 1, 0); /* set source for 96M */ ++ p2 = __raw_readl(CM_CLKSEL_CORE); ++ sr32((u32) &p2, 8, 4, CORE_SSI_DIV); /* ssi */ ++ sr32((u32) &p2, 4, 2, CORE_FUSB_DIV); /* fsusb */ ++ sr32((u32) &p2, 2, 2, CORE_L4_DIV); /* l4 */ ++ sr32((u32) &p2, 0, 2, CORE_L3_DIV); /* l3 */ ++ ++ p3 = CM_IDLEST_CKGEN; ++ ++ (*f_lock_pll) (p0, p1, p2, p3); ++ } ++ ++ /* PER DPLL */ ++ sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); ++ wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); ++ ++ /* Getting the base address to PER DPLL param table */ ++ /* Set N */ ++ dpll_param_p = (dpll_param *) get_per_dpll_param(); ++ /* Moving it to the right sysclk base */ ++ dpll_param_p = dpll_param_p + clk_index; ++ /* Errata 1.50 Workaround for OMAP3 ES1.0 only */ ++ /* If using default divisors, write default divisor + 1 ++ and then the actual divisor value */ ++ /* Need to change it to silicon and revision check */ ++ if (1) { ++ sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2 + 1); /* set M6 */ ++ sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ ++ sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2 + 1); /* set M5 */ ++ sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ ++ sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2 + 1); /* set M4 */ ++ sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ ++ sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2 + 1); /* set M3 */ ++ sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ ++ sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2 + 1); /* set M2 */ ++ sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ ++ } else { ++ sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ ++ sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ ++ sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ ++ sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ ++ sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ ++ } ++ sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ ++ sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ ++ sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel); /* FREQSEL */ ++ sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ ++ wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); ++ ++ /* Getting the base address to MPU DPLL param table */ ++ dpll_param_p = (dpll_param *) get_mpu_dpll_param(); ++ /* Moving it to the right sysclk and ES rev base */ ++ dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; ++ /* MPU DPLL (unlocked already) */ ++ sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ ++ sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ ++ sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ ++ sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ ++ sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ ++ wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); ++ ++ /* Getting the base address to IVA DPLL param table */ ++ dpll_param_p = (dpll_param *) get_iva_dpll_param(); ++ /* Moving it to the right sysclk and ES rev base */ ++ dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; ++ /* IVA DPLL (set to 12*20=240MHz) */ ++ sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); ++ wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); ++ sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ ++ sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ ++ sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ ++ sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ ++ sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ ++ wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); ++ ++ /* Set up GPTimers to sys_clk source only */ ++ sr32(CM_CLKSEL_PER, 0, 8, 0xff); ++ sr32(CM_CLKSEL_WKUP, 0, 1, 1); ++ ++ sdelay(5000); ++} ++ ++/****************************************************************************** ++ * peripheral_enable() - Enable the clks & power for perifs (GPT2, UART1,...) ++ *****************************************************************************/ ++void per_clocks_enable(void) ++{ ++ /* Enable GP2 timer. */ ++ sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ ++ sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ ++ sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ ++ ++#ifdef CFG_NS16550 ++ /* Enable UART1 clocks */ ++ sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); ++ sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); ++ ++ /* UART 3 Clocks */ ++ sr32(CM_FCLKEN_PER, 11, 1, 0x1); ++ sr32(CM_ICLKEN_PER, 11, 1, 0x1); ++#endif ++#ifdef CONFIG_DRIVER_OMAP34XX_I2C ++ /* Turn on all 3 I2C clocks */ ++ sr32(CM_FCLKEN1_CORE, 15, 3, 0x7); ++ sr32(CM_ICLKEN1_CORE, 15, 3, 0x7); /* I2C1,2,3 = on */ ++#endif ++ /* Enable the ICLK for 32K Sync Timer as its used in udelay */ ++ sr32(CM_ICLKEN_WKUP, 2, 1, 0x1); ++ ++ sr32(CM_FCLKEN_IVA2, 0, 32, FCK_IVA2_ON); ++ sr32(CM_FCLKEN1_CORE, 0, 32, FCK_CORE1_ON); ++ sr32(CM_ICLKEN1_CORE, 0, 32, ICK_CORE1_ON); ++ sr32(CM_ICLKEN2_CORE, 0, 32, ICK_CORE2_ON); ++ sr32(CM_FCLKEN_WKUP, 0, 32, FCK_WKUP_ON); ++ sr32(CM_ICLKEN_WKUP, 0, 32, ICK_WKUP_ON); ++ sr32(CM_FCLKEN_DSS, 0, 32, FCK_DSS_ON); ++ sr32(CM_ICLKEN_DSS, 0, 32, ICK_DSS_ON); ++ sr32(CM_FCLKEN_CAM, 0, 32, FCK_CAM_ON); ++ sr32(CM_ICLKEN_CAM, 0, 32, ICK_CAM_ON); ++ sr32(CM_FCLKEN_PER, 0, 32, FCK_PER_ON); ++ sr32(CM_ICLKEN_PER, 0, 32, ICK_PER_ON); ++ ++ sdelay(1000); ++} +diff --git a/board/omap3530beagle/config.mk b/board/omap3530beagle/config.mk +new file mode 100644 +index 0000000..9639c43 +--- /dev/null ++++ b/board/omap3530beagle/config.mk +@@ -0,0 +1,17 @@ ++# ++# (C) Copyright 2006 ++# Texas Instruments, ++# ++# Begale Board uses OMAP3 (ARM-CortexA8) cpu ++# see http://www.ti.com/ for more information on Texas Instruments ++# ++# Physical Address: ++# 8000'0000 (bank0) ++# A000/0000 (bank1) ++# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 ++# (mem base + reserved) ++ ++# For use with external or internal boots. ++TEXT_BASE = 0x80e80000 ++ ++ +diff --git a/board/omap3530beagle/lowlevel_init.S b/board/omap3530beagle/lowlevel_init.S +new file mode 100644 +index 0000000..7ec4d05 +--- /dev/null ++++ b/board/omap3530beagle/lowlevel_init.S +@@ -0,0 +1,361 @@ ++/* ++ * Board specific setup info ++ * ++ * (C) Copyright 2008 ++ * Texas Instruments, ++ * ++ * Initial Code by: ++ * Richard Woodruff ++ * Syed Mohammed Khasim ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++_TEXT_BASE: ++ .word TEXT_BASE /* sdram load addr from config.mk */ ++ ++#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) ++/************************************************************************** ++ * cpy_clk_code: relocates clock code into SRAM where its safer to execute ++ * R1 = SRAM destination address. ++ *************************************************************************/ ++.global cpy_clk_code ++ cpy_clk_code: ++ /* Copy DPLL code into SRAM */ ++ adr r0, go_to_speed /* get addr of clock setting code */ ++ mov r2, #384 /* r2 size to copy (div by 32 bytes) */ ++ mov r1, r1 /* r1 <- dest address (passed in) */ ++ add r2, r2, r0 /* r2 <- source end address */ ++next2: ++ ldmia r0!, {r3-r10} /* copy from source address [r0] */ ++ stmia r1!, {r3-r10} /* copy to target address [r1] */ ++ cmp r0, r2 /* until source end address [r2] */ ++ bne next2 ++ mov pc, lr /* back to caller */ ++ ++/* *************************************************************************** ++ * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed ++ * -executed from SRAM. ++ * R0 = CM_CLKEN_PLL-bypass value ++ * R1 = CM_CLKSEL1_PLL-m, n, and divider values ++ * R2 = CM_CLKSEL_CORE-divider values ++ * R3 = CM_IDLEST_CKGEN - addr dpll lock wait ++ * ++ * Note: If core unlocks/relocks and SDRAM is running fast already it gets ++ * confused. A reset of the controller gets it back. Taking away its ++ * L3 when its not in self refresh seems bad for it. Normally, this ++ * code runs from flash before SDR is init so that should be ok. ++ ****************************************************************************/ ++.global go_to_speed ++ go_to_speed: ++ stmfd sp!, {r4-r6} ++ ++ /* move into fast relock bypass */ ++ ldr r4, pll_ctl_add ++ str r0, [r4] ++wait1: ++ ldr r5, [r3] /* get status */ ++ and r5, r5, #0x1 /* isolate core status */ ++ cmp r5, #0x1 /* still locked? */ ++ beq wait1 /* if lock, loop */ ++ ++ /* set new dpll dividers _after_ in bypass */ ++ ldr r5, pll_div_add1 ++ str r1, [r5] /* set m, n, m2 */ ++ ldr r5, pll_div_add2 ++ str r2, [r5] /* set l3/l4/.. dividers*/ ++ ldr r5, pll_div_add3 /* wkup */ ++ ldr r2, pll_div_val3 /* rsm val */ ++ str r2, [r5] ++ ldr r5, pll_div_add4 /* gfx */ ++ ldr r2, pll_div_val4 ++ str r2, [r5] ++ ldr r5, pll_div_add5 /* emu */ ++ ldr r2, pll_div_val5 ++ str r2, [r5] ++ ++ /* now prepare GPMC (flash) for new dpll speed */ ++ /* flash needs to be stable when we jump back to it */ ++ ldr r5, flash_cfg3_addr ++ ldr r2, flash_cfg3_val ++ str r2, [r5] ++ ldr r5, flash_cfg4_addr ++ ldr r2, flash_cfg4_val ++ str r2, [r5] ++ ldr r5, flash_cfg5_addr ++ ldr r2, flash_cfg5_val ++ str r2, [r5] ++ ldr r5, flash_cfg1_addr ++ ldr r2, [r5] ++ orr r2, r2, #0x3 /* up gpmc divider */ ++ str r2, [r5] ++ ++ /* lock DPLL3 and wait a bit */ ++ orr r0, r0, #0x7 /* set up for lock mode */ ++ str r0, [r4] /* lock */ ++ nop /* ARM slow at this point working at sys_clk */ ++ nop ++ nop ++ nop ++wait2: ++ ldr r5, [r3] /* get status */ ++ and r5, r5, #0x1 /* isolate core status */ ++ cmp r5, #0x1 /* still locked? */ ++ bne wait2 /* if lock, loop */ ++ nop ++ nop ++ nop ++ nop ++ ldmfd sp!, {r4-r6} ++ mov pc, lr /* back to caller, locked */ ++ ++_go_to_speed: .word go_to_speed ++ ++/* these constants need to be close for PIC code */ ++/* The Nor has to be in the Flash Base CS0 for this condition to happen */ ++flash_cfg1_addr: ++ .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) ++flash_cfg3_addr: ++ .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) ++flash_cfg3_val: ++ .word STNOR_GPMC_CONFIG3 ++flash_cfg4_addr: ++ .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) ++flash_cfg4_val: ++ .word STNOR_GPMC_CONFIG4 ++flash_cfg5_val: ++ .word STNOR_GPMC_CONFIG5 ++flash_cfg5_addr: ++ .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) ++pll_ctl_add: ++ .word CM_CLKEN_PLL ++pll_div_add1: ++ .word CM_CLKSEL1_PLL ++pll_div_add2: ++ .word CM_CLKSEL_CORE ++pll_div_add3: ++ .word CM_CLKSEL_WKUP ++pll_div_val3: ++ .word (WKUP_RSM << 1) ++pll_div_add4: ++ .word CM_CLKSEL_GFX ++pll_div_val4: ++ .word (GFX_DIV << 0) ++pll_div_add5: ++ .word CM_CLKSEL1_EMU ++pll_div_val5: ++ .word CLSEL1_EMU_VAL ++ ++#endif ++ ++.globl lowlevel_init ++lowlevel_init: ++ ldr sp, SRAM_STACK ++ str ip, [sp] /* stash old link register */ ++ mov ip, lr /* save link reg across call */ ++ bl s_init /* go setup pll,mux,memory */ ++ ldr ip, [sp] /* restore save ip */ ++ mov lr, ip /* restore link reg */ ++ ++ /* back to arch calling code */ ++ mov pc, lr ++ ++ /* the literal pools origin */ ++ .ltorg ++ ++REG_CONTROL_STATUS: ++ .word CONTROL_STATUS ++SRAM_STACK: ++ .word LOW_LEVEL_SRAM_STACK ++ ++/* DPLL(1-4) PARAM TABLES */ ++/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal ++ * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). ++ * The values are defined for all possible sysclk and for ES1 and ES2. ++ */ ++ ++mpu_dpll_param: ++/* 12MHz */ ++/* ES1 */ ++.word 0x0FE,0x07,0x05,0x01 ++/* ES2 */ ++.word 0x0FA,0x05,0x07,0x01 ++/* 3410 */ ++.word 0x085,0x05,0x07,0x01 ++ ++/* 13MHz */ ++/* ES1 */ ++.word 0x17D,0x0C,0x03,0x01 ++/* ES2 */ ++.word 0x1F4,0x0C,0x03,0x01 ++/* 3410 */ ++.word 0x10A,0x0C,0x03,0x01 ++ ++/* 19.2MHz */ ++/* ES1 */ ++.word 0x179,0x12,0x04,0x01 ++/* ES2 */ ++.word 0x271,0x17,0x03,0x01 ++/* 3410 */ ++.word 0x14C,0x17,0x03,0x01 ++ ++/* 26MHz */ ++/* ES1 */ ++.word 0x17D,0x19,0x03,0x01 ++/* ES2 */ ++.word 0x0FA,0x0C,0x07,0x01 ++/* 3410 */ ++.word 0x085,0x0C,0x07,0x01 ++ ++/* 38.4MHz */ ++/* ES1 */ ++.word 0x1FA,0x32,0x03,0x01 ++/* ES2 */ ++.word 0x271,0x2F,0x03,0x01 ++/* 3410 */ ++.word 0x14C,0x2F,0x03,0x01 ++ ++ ++.globl get_mpu_dpll_param ++get_mpu_dpll_param: ++ adr r0, mpu_dpll_param ++ mov pc, lr ++ ++iva_dpll_param: ++/* 12MHz */ ++/* ES1 */ ++.word 0x07D,0x05,0x07,0x01 ++/* ES2 */ ++.word 0x0B4,0x05,0x07,0x01 ++/* 3410 */ ++.word 0x085,0x05,0x07,0x01 ++ ++/* 13MHz */ ++/* ES1 */ ++.word 0x0FA,0x0C,0x03,0x01 ++/* ES2 */ ++.word 0x168,0x0C,0x03,0x01 ++/* 3410 */ ++.word 0x10A,0x0C,0x03,0x01 ++ ++/* 19.2MHz */ ++/* ES1 */ ++.word 0x082,0x09,0x07,0x01 ++/* ES2 */ ++.word 0x0E1,0x0B,0x06,0x01 ++/* 3410 */ ++.word 0x14C,0x17,0x03,0x01 ++ ++/* 26MHz */ ++/* ES1 */ ++.word 0x07D,0x0C,0x07,0x01 ++/* ES2 */ ++.word 0x0B4,0x0C,0x07,0x01 ++/* 3410 */ ++.word 0x085,0x0C,0x07,0x01 ++ ++/* 38.4MHz */ ++/* ES1 */ ++.word 0x13F,0x30,0x03,0x01 ++/* ES2 */ ++.word 0x0E1,0x17,0x06,0x01 ++/* 3410 */ ++.word 0x14C,0x2F,0x03,0x01 ++ ++ ++.globl get_iva_dpll_param ++get_iva_dpll_param: ++ adr r0, iva_dpll_param ++ mov pc, lr ++ ++/* Core DPLL targets for L3 at 166 & L133 */ ++core_dpll_param: ++/* 12MHz */ ++/* ES1 */ ++.word M_12_ES1,M_12_ES1,FSL_12_ES1,M2_12_ES1 ++/* ES2 */ ++.word M_12,N_12,FSEL_12,M2_12 ++/* 3410 */ ++.word M_12,N_12,FSEL_12,M2_12 ++ ++/* 13MHz */ ++/* ES1 */ ++.word M_13_ES1,N_13_ES1,FSL_13_ES1,M2_13_ES1 ++/* ES2 */ ++.word M_13,N_13,FSEL_13,M2_13 ++/* 3410 */ ++.word M_13,N_13,FSEL_13,M2_13 ++ ++/* 19.2MHz */ ++/* ES1 */ ++.word M_19p2_ES1,N_19p2_ES1,FSL_19p2_ES1,M2_19p2_ES1 ++/* ES2 */ ++.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 ++/* 3410 */ ++.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 ++ ++/* 26MHz */ ++/* ES1 */ ++.word M_26_ES1,N_26_ES1,FSL_26_ES1,M2_26_ES1 ++/* ES2 */ ++.word M_26,N_26,FSEL_26,M2_26 ++/* 3410 */ ++.word M_26,N_26,FSEL_26,M2_26 ++ ++/* 38.4MHz */ ++/* ES1 */ ++.word M_38p4_ES1,N_38p4_ES1,FSL_38p4_ES1,M2_38p4_ES1 ++/* ES2 */ ++.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 ++/* 3410 */ ++.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 ++ ++.globl get_core_dpll_param ++get_core_dpll_param: ++ adr r0, core_dpll_param ++ mov pc, lr ++ ++/* PER DPLL values are same for both ES1 and ES2 */ ++per_dpll_param: ++/* 12MHz */ ++.word 0xD8,0x05,0x07,0x09 ++ ++/* 13MHz */ ++.word 0x1B0,0x0C,0x03,0x09 ++ ++/* 19.2MHz */ ++.word 0xE1,0x09,0x07,0x09 ++ ++/* 26MHz */ ++.word 0xD8,0x0C,0x07,0x09 ++ ++/* 38.4MHz */ ++.word 0xE1,0x13,0x07,0x09 ++ ++.globl get_per_dpll_param ++get_per_dpll_param: ++ adr r0, per_dpll_param ++ mov pc, lr ++ +diff --git a/board/omap3530beagle/mem.c b/board/omap3530beagle/mem.c +new file mode 100644 +index 0000000..bee96c3 +--- /dev/null ++++ b/board/omap3530beagle/mem.c +@@ -0,0 +1,251 @@ ++/* ++ * (C) Copyright 2008 ++ * Texas Instruments, ++ * ++ * Initial Code from: ++ * Richard Woodruff ++ * Syed Mohammed Khasim ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* Only One NAND allowed on board at a time. ++ * The GPMC CS Base for the same ++ */ ++unsigned int nand_cs_base; ++unsigned int boot_flash_base; ++unsigned int boot_flash_off; ++unsigned int boot_flash_sec; ++unsigned int boot_flash_type; ++volatile unsigned int boot_flash_env_addr; ++ ++/* help common/env_flash.c */ ++#ifdef ENV_IS_VARIABLE ++ ++uchar(*boot_env_get_char_spec) (int index); ++int (*boot_env_init) (void); ++int (*boot_saveenv) (void); ++void (*boot_env_relocate_spec) (void); ++ ++/* 16 bit NAND */ ++uchar env_get_char_spec(int index); ++int env_init(void); ++int saveenv(void); ++void env_relocate_spec(void); ++extern char *env_name_spec; ++ ++u8 is_nand; ++ ++#endif /* ENV_IS_VARIABLE */ ++ ++static u32 gpmc_m_nand[GPMC_MAX_REG] = { ++ M_NAND_GPMC_CONFIG1, ++ M_NAND_GPMC_CONFIG2, ++ M_NAND_GPMC_CONFIG3, ++ M_NAND_GPMC_CONFIG4, ++ M_NAND_GPMC_CONFIG5, ++ M_NAND_GPMC_CONFIG6, 0 ++}; ++ ++/************************************************************************** ++ * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow ++ * command line mem=xyz use all memory with out discontinuous support ++ * compiled in. Could do it at the ATAG, but there really is two banks... ++ * Called as part of 2nd phase DDR init. ++ **************************************************************************/ ++void make_cs1_contiguous(void) ++{ ++ u32 size, a_add_low, a_add_high; ++ ++ size = get_sdr_cs_size(SDRC_CS0_OSET); ++ size /= SZ_32M; /* find size to offset CS1 */ ++ a_add_high = (size & 3) << 8; /* set up low field */ ++ a_add_low = (size & 0x3C) >> 2; /* set up high field */ ++ __raw_writel((a_add_high | a_add_low), SDRC_CS_CFG); ++ ++} ++ ++/******************************************************** ++ * mem_ok() - test used to see if timings are correct ++ * for a part. Helps in guessing which part ++ * we are currently using. ++ *******************************************************/ ++u32 mem_ok(void) ++{ ++ u32 val1, val2, addr; ++ u32 pattern = 0x12345678; ++ ++ addr = OMAP34XX_SDRC_CS0; ++ ++ __raw_writel(0x0, addr + 0x400); /* clear pos A */ ++ __raw_writel(pattern, addr); /* pattern to pos B */ ++ __raw_writel(0x0, addr + 4); /* remove pattern off the bus */ ++ val1 = __raw_readl(addr + 0x400); /* get pos A value */ ++ val2 = __raw_readl(addr); /* get val2 */ ++ ++ if ((val1 != 0) || (val2 != pattern)) /* see if pos A value changed */ ++ return (0); ++ else ++ return (1); ++} ++ ++/******************************************************** ++ * sdrc_init() - init the sdrc chip selects CS0 and CS1 ++ * - early init routines, called from flash or ++ * SRAM. ++ *******************************************************/ ++void sdrc_init(void) ++{ ++ /* only init up first bank here */ ++ do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT); ++} ++ ++/************************************************************************* ++ * do_sdrc_init(): initialize the SDRAM for use. ++ * -code sets up SDRAM basic SDRC timings for CS0 ++ * -optimal settings can be placed here, or redone after i2c ++ * inspection of board info ++ * ++ * - code called ones in C-Stack only context for CS0 and a possible 2nd ++ * time depending on memory configuration from stack+global context ++ **************************************************************************/ ++ ++void do_sdrc_init(u32 offset, u32 early) ++{ ++ ++ /* reset sdrc controller */ ++ __raw_writel(SOFTRESET, SDRC_SYSCONFIG); ++ wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); ++ __raw_writel(0, SDRC_SYSCONFIG); ++ ++ /* setup sdrc to ball mux */ ++ __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); ++ ++ /* SDRC_MCFG0 register */ ++ (*(unsigned int *) 0x6D000080) = 0x02584099; /* from Micron */ ++ ++ /* SDRC_RFR_CTRL0 register */ ++ (*(unsigned int *) 0x6D0000a4) = 0x54601; /* for 166M */ ++ ++ /* SDRC_ACTIM_CTRLA0 register */ ++ (*(unsigned int *) 0x6D00009c) = 0xa29db4c6; /* for 166M */ ++ ++ /* SDRC_ACTIM_CTRLB0 register */ ++ (*(unsigned int *) 0x6D0000a0) = 0x12214; /* for 166M */ ++ ++ /* Disble Power Down of CKE cuz of 1 CKE on combo part */ ++ (*(unsigned int *) 0x6D000070) = 0x00000081; ++ ++ /* SDRC_Manual command register */ ++ (*(unsigned int *) 0x6D0000a8) = 0x00000000; /* NOP command */ ++ (*(unsigned int *) 0x6D0000a8) = 0x00000001; /* Precharge command */ ++ (*(unsigned int *) 0x6D0000a8) = 0x00000002; /* Auto-refresh command */ ++ (*(unsigned int *) 0x6D0000a8) = 0x00000002; /* Auto-refresh command */ ++ ++ /* SDRC MR0 register */ ++ (*(int *) 0x6D000084) = 0x00000032; /* Burst length = 4 */ ++ /* CAS latency = 3, Write Burst = Read Burst Serial Mode */ ++ ++ /* SDRC DLLA control register */ ++ (*(unsigned int *) 0x6D000060) = 0x0000A; ++ sdelay(0x20000); ++} ++ ++void enable_gpmc_config(u32 *gpmc_config, u32 gpmc_base, u32 base, u32 size) ++{ ++ __raw_writel(0, GPMC_CONFIG7 + gpmc_base); ++ sdelay(1000); ++ /* Delay for settling */ ++ __raw_writel(gpmc_config[0], GPMC_CONFIG1 + gpmc_base); ++ __raw_writel(gpmc_config[1], GPMC_CONFIG2 + gpmc_base); ++ __raw_writel(gpmc_config[2], GPMC_CONFIG3 + gpmc_base); ++ __raw_writel(gpmc_config[3], GPMC_CONFIG4 + gpmc_base); ++ __raw_writel(gpmc_config[4], GPMC_CONFIG5 + gpmc_base); ++ __raw_writel(gpmc_config[5], GPMC_CONFIG6 + gpmc_base); ++ /* Enable the config */ ++ __raw_writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) | ++ (1 << 6)), GPMC_CONFIG7 + gpmc_base); ++ sdelay(2000); ++} ++ ++/***************************************************** ++ * gpmc_init(): init gpmc bus ++ * Init GPMC for x16, MuxMode (SDRAM in x32). ++ * This code can only be executed from SRAM or SDRAM. ++ *****************************************************/ ++void gpmc_init(void) ++{ ++ /* putting a blanket check on GPMC based on ZeBu for now */ ++ u32 mux = 0, mwidth; ++ u32 *gpmc_config = NULL; ++ u32 gpmc_base = 0; ++ u32 base = 0; ++ u32 size = 0; ++ u32 f_off = CFG_MONITOR_LEN; ++ u32 f_sec = 0; ++ u32 config = 0; ++ ++ mux = BIT9; ++ mwidth = get_gpmc0_width(); ++ ++ /* global settings */ ++ __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ ++ __raw_writel(0, GPMC_TIMEOUT_CONTROL); /* timeout disable */ ++ ++ config = __raw_readl(GPMC_CONFIG); ++ config &= (~0xf00); ++ __raw_writel(config, GPMC_CONFIG); ++ ++ /* Disable the GPMC0 config set by ROM code ++ * It conflicts with our MPDB (both at 0x08000000) ++ */ ++ __raw_writel(0, GPMC_CONFIG7 + GPMC_CONFIG_CS0); ++ sdelay(1000); ++ ++ /* CS 0 */ ++ gpmc_config = gpmc_m_nand; ++ gpmc_base = GPMC_CONFIG_CS0 + (0 * GPMC_CONFIG_WIDTH); ++ base = PISMO1_NAND_BASE; ++ size = PISMO1_NAND_SIZE; ++ enable_gpmc_config(gpmc_config, gpmc_base, base, size); ++ ++ f_off = SMNAND_ENV_OFFSET; ++ f_sec = SZ_128K; ++ is_nand = 1; ++ nand_cs_base = gpmc_base; ++ ++ /* env setup */ ++ boot_flash_base = base; ++ boot_flash_off = f_off; ++ boot_flash_sec = f_sec; ++ boot_flash_env_addr = f_off; ++ ++#ifdef ENV_IS_VARIABLE ++ boot_env_get_char_spec = env_get_char_spec; ++ boot_env_init = env_init; ++ boot_saveenv = saveenv; ++ boot_env_relocate_spec = env_relocate_spec; ++#endif ++ ++} +diff --git a/board/omap3530beagle/nand.c b/board/omap3530beagle/nand.c +new file mode 100644 +index 0000000..4a8b6e4 +--- /dev/null ++++ b/board/omap3530beagle/nand.c +@@ -0,0 +1,409 @@ ++/* ++ * (C) Copyright 2004-2008 Texas Instruments, ++ * Rohit Choraria ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#if defined(CONFIG_CMD_NAND) ++ ++#include ++ ++unsigned char cs; ++volatile unsigned long gpmc_cs_base_add; ++ ++#define GPMC_BUF_EMPTY 0 ++#define GPMC_BUF_FULL 1 ++ ++#define ECC_P1_128_E(val) ((val) & 0x000000FF) /* Bit 0 to 7 */ ++#define ECC_P512_2048_E(val) (((val) & 0x00000F00)>>8) /* Bit 8 to 11 */ ++#define ECC_P1_128_O(val) (((val) & 0x00FF0000)>>16) /* Bit 16 to Bit 23 */ ++#define ECC_P512_2048_O(val) (((val) & 0x0F000000)>>24) /* Bit 24 to Bit 27 */ ++ ++/* ++ * omap_nand_hwcontrol - Set the address pointers corretly for the ++ * following address/data/command operation ++ * @mtd: MTD device structure ++ * @ctrl: Says whether Address or Command or Data is following. ++ */ ++static void omap_nand_hwcontrol(struct mtd_info *mtd, int ctrl) ++{ ++ register struct nand_chip *this = mtd->priv; ++ ++ /* Point the IO_ADDR to DATA and ADDRESS registers instead ++ of chip address */ ++ switch (ctrl) { ++ case NAND_CTL_SETCLE: ++ this->IO_ADDR_W = (void *) gpmc_cs_base_add + GPMC_NAND_CMD; ++ this->IO_ADDR_R = (void *) gpmc_cs_base_add + GPMC_NAND_DAT; ++ break; ++ case NAND_CTL_SETALE: ++ this->IO_ADDR_W = (void *) gpmc_cs_base_add + GPMC_NAND_ADR; ++ this->IO_ADDR_R = (void *) gpmc_cs_base_add + GPMC_NAND_DAT; ++ break; ++ case NAND_CTL_CLRCLE: ++ this->IO_ADDR_W = (void *) gpmc_cs_base_add + GPMC_NAND_DAT; ++ this->IO_ADDR_R = (void *) gpmc_cs_base_add + GPMC_NAND_DAT; ++ break; ++ case NAND_CTL_CLRALE: ++ this->IO_ADDR_W = (void *) gpmc_cs_base_add + GPMC_NAND_DAT; ++ this->IO_ADDR_R = (void *) gpmc_cs_base_add + GPMC_NAND_DAT; ++ break; ++ } ++} ++ ++/* ++ * omap_nand_wait - called primarily after a program/erase operation ++ * so that we access NAND again only after the device ++ * is ready again. ++ * @mtd: MTD device structure ++ * @chip: nand_chip structure ++ * @state: State from which wait function is being called i.e write/erase. ++ */ ++static int omap_nand_wait(struct mtd_info *mtd, struct nand_chip *chip, ++ int state) ++{ ++ register struct nand_chip *this = mtd->priv; ++ int status = 0; ++ ++ this->IO_ADDR_W = (void *) gpmc_cs_base_add + GPMC_NAND_CMD; ++ this->IO_ADDR_R = (void *) gpmc_cs_base_add + GPMC_NAND_DAT; ++ /* Send the status command and loop until the device is free */ ++ while (!(status & 0x40)) { ++ __raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W); ++ status = __raw_readb(this->IO_ADDR_R); ++ } ++ return status; ++} ++ ++#ifdef CFG_NAND_WIDTH_16 ++/* ++ * omap_nand_write_buf16 - [DEFAULT] write buffer to chip ++ * @mtd: MTD device structure ++ * @buf: data buffer ++ * @len: number of bytes to write ++ * ++ * Default write function for 16bit buswith ++ */ ++static void omap_nand_write_buf(struct mtd_info *mtd, const u_char *buf, ++ int len) ++{ ++ int i; ++ struct nand_chip *this = mtd->priv; ++ u16 *p = (u16 *) buf; ++ len >>= 1; ++ ++ for (i = 0; i < len; i++) { ++ writew(p[i], this->IO_ADDR_W); ++ while (GPMC_BUF_EMPTY == (readl(GPMC_STATUS) & GPMC_BUF_FULL)) ; ++ } ++} ++ ++/* ++ * nand_read_buf16 - [DEFAULT] read chip data into buffer ++ * @mtd: MTD device structure ++ * @buf: buffer to store date ++ * @len: number of bytes to read ++ * ++ * Default read function for 16bit buswith ++ */ ++static void omap_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) ++{ ++ int i; ++ struct nand_chip *this = mtd->priv; ++ u16 *p = (u16 *) buf; ++ len >>= 1; ++ ++ for (i = 0; i < len; i++) ++ p[i] = readw(this->IO_ADDR_R); ++} ++ ++#else ++/* ++ * omap_nand_write_buf - write buffer to NAND controller ++ * @mtd: MTD device structure ++ * @buf: data buffer ++ * @len: number of bytes to write ++ * ++ */ ++static void omap_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, ++ int len) ++{ ++ int i; ++ int j = 0; ++ struct nand_chip *chip = mtd->priv; ++ ++ for (i = 0; i < len; i++) { ++ writeb(buf[i], chip->IO_ADDR_W); ++ for (j = 0; j < 10; j++) ; ++ } ++ ++} ++ ++/* ++ * omap_nand_read_buf - read data from NAND controller into buffer ++ * @mtd: MTD device structure ++ * @buf: buffer to store date ++ * @len: number of bytes to read ++ * ++ */ ++static void omap_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) ++{ ++ int i; ++ int j = 0; ++ struct nand_chip *chip = mtd->priv; ++ ++ for (i = 0; i < len; i++) { ++ buf[i] = readb(chip->IO_ADDR_R); ++ while (GPMC_BUF_EMPTY == (readl(GPMC_STATUS) & GPMC_BUF_FULL)); ++ } ++} ++#endif /* CFG_NAND_WIDTH_16 */ ++ ++/* ++ * omap_hwecc_init - Initialize the Hardware ECC for NAND flash in ++ * GPMC controller ++ * @mtd: MTD device structure ++ * ++ */ ++static void omap_hwecc_init(struct nand_chip *chip) ++{ ++ unsigned long val = 0x0; ++ ++ /* Init ECC Control Register */ ++ /* Clear all ECC | Enable Reg1 */ ++ val = ((0x00000001 << 8) | 0x00000001); ++ __raw_writel(val, GPMC_BASE + GPMC_ECC_CONTROL); ++ __raw_writel(0x3fcff000, GPMC_BASE + GPMC_ECC_SIZE_CONFIG); ++} ++ ++/* ++ * omap_correct_data - Compares the ecc read from nand spare area with ++ * ECC registers values ++ * and corrects one bit error if it has occured ++ * @mtd: MTD device structure ++ * @dat: page data ++ * @read_ecc: ecc read from nand flash ++ * @calc_ecc: ecc read from ECC registers ++ */ ++static int omap_correct_data(struct mtd_info *mtd, u_char *dat, ++ u_char *read_ecc, u_char *calc_ecc) ++{ ++ return 0; ++} ++ ++/* ++ * omap_calculate_ecc - Generate non-inverted ECC bytes. ++ * ++ * Using noninverted ECC can be considered ugly since writing a blank ++ * page ie. padding will clear the ECC bytes. This is no problem as ++ * long nobody is trying to write data on the seemingly unused page. ++ * Reading an erased page will produce an ECC mismatch between ++ * generated and read ECC bytes that has to be dealt with separately. ++ * @mtd: MTD structure ++ * @dat: unused ++ * @ecc_code: ecc_code buffer ++ */ ++static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat, ++ u_char *ecc_code) ++{ ++ unsigned long val = 0x0; ++ unsigned long reg; ++ ++ /* Start Reading from HW ECC1_Result = 0x200 */ ++ reg = (unsigned long) (GPMC_BASE + GPMC_ECC1_RESULT); ++ val = __raw_readl(reg); ++ ++ *ecc_code++ = ECC_P1_128_E(val); ++ *ecc_code++ = ECC_P1_128_O(val); ++ *ecc_code++ = ECC_P512_2048_E(val) | ECC_P512_2048_O(val) << 4; ++ ++ return 0; ++} ++ ++/* ++ * omap_enable_ecc - This function enables the hardware ecc functionality ++ * @mtd: MTD device structure ++ * @mode: Read/Write mode ++ */ ++static void omap_enable_hwecc(struct mtd_info *mtd, int mode) ++{ ++ struct nand_chip *chip = mtd->priv; ++ unsigned int val = __raw_readl(GPMC_BASE + GPMC_ECC_CONFIG); ++ unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1; ++ ++ switch (mode) { ++ case NAND_ECC_READ: ++ __raw_writel(0x101, GPMC_BASE + GPMC_ECC_CONTROL); ++ /* ECC col width | CS | ECC Enable */ ++ val = (dev_width << 7) | (cs << 1) | (0x1); ++ break; ++ case NAND_ECC_READSYN: ++ __raw_writel(0x100, GPMC_BASE + GPMC_ECC_CONTROL); ++ /* ECC col width | CS | ECC Enable */ ++ val = (dev_width << 7) | (cs << 1) | (0x1); ++ break; ++ case NAND_ECC_WRITE: ++ __raw_writel(0x101, GPMC_BASE + GPMC_ECC_CONTROL); ++ /* ECC col width | CS | ECC Enable */ ++ val = (dev_width << 7) | (cs << 1) | (0x1); ++ break; ++ default: ++ printf("Error: Unrecognized Mode[%d]!\n", mode); ++ break; ++ } ++ ++ __raw_writel(val, GPMC_BASE + GPMC_ECC_CONFIG); ++} ++ ++static struct nand_oobinfo hw_nand_oob_64 = { ++ .useecc = MTD_NANDECC_AUTOPLACE, ++ .eccbytes = 12, ++ .eccpos = { ++ 2, 3, 4, 5, ++ 6, 7, 8, 9, ++ 10, 11, 12, 13}, ++ .oobfree = { {20, 50} } /* don't care */ ++}; ++ ++static struct nand_oobinfo sw_nand_oob_64 = { ++ .useecc = MTD_NANDECC_AUTOPLACE, ++ .eccbytes = 24, ++ .eccpos = { ++ 40, 41, 42, 43, 44, 45, 46, 47, ++ 48, 49, 50, 51, 52, 53, 54, 55, ++ 56, 57, 58, 59, 60, 61, 62, 63}, ++ .oobfree = { {2, 38} } ++}; ++ ++void omap_nand_switch_ecc(struct mtd_info *mtd, int hardware) ++{ ++ struct nand_chip *nand = mtd->priv; ++ ++ if (!hardware) { ++ nand->eccmode = NAND_ECC_SOFT; ++ nand->autooob = &sw_nand_oob_64; ++ nand->eccsize = 256; /* set default eccsize */ ++ nand->eccbytes = 3; ++ nand->eccsteps = 8; ++ nand->enable_hwecc = 0; ++ nand->calculate_ecc = nand_calculate_ecc; ++ nand->correct_data = nand_correct_data; ++ } else { ++ nand->eccmode = NAND_ECC_HW3_512; ++ nand->autooob = &hw_nand_oob_64; ++ nand->eccsize = 512; ++ nand->eccbytes = 3; ++ nand->eccsteps = 4; ++ nand->enable_hwecc = omap_enable_hwecc; ++ nand->correct_data = omap_correct_data; ++ nand->calculate_ecc = omap_calculate_ecc; ++ ++ omap_hwecc_init(nand); ++ } ++ ++ mtd->eccsize = nand->eccsize; ++ nand->oobdirty = 1; ++ ++ if (nand->options & NAND_BUSWIDTH_16) { ++ mtd->oobavail = mtd->oobsize - (nand->autooob->eccbytes + 2); ++ if (nand->autooob->eccbytes & 0x01) ++ mtd->oobavail--; ++ } else ++ mtd->oobavail = mtd->oobsize - (nand->autooob->eccbytes + 1); ++} ++ ++/* ++ * Board-specific NAND initialization. The following members of the ++ * argument are board-specific (per include/linux/mtd/nand_new.h): ++ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device ++ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device ++ * - hwcontrol: hardwarespecific function for accesing control-lines ++ * - dev_ready: hardwarespecific function for accesing device ready/busy line ++ * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must ++ * only be provided if a hardware ECC is available ++ * - eccmode: mode of ecc, see defines ++ * - chip_delay: chip dependent delay for transfering data from array to ++ * read regs (tR) ++ * - options: various chip options. They can partly be set to inform ++ * nand_scan about special functionality. See the defines for further ++ * explanation ++ * Members with a "?" were not set in the merged testing-NAND branch, ++ * so they are not set here either. ++ */ ++int board_nand_init(struct nand_chip *nand) ++{ ++ int gpmc_config = 0; ++ cs = 0; ++ while (cs <= GPMC_MAX_CS) { ++ /* Each GPMC set for a single CS is at offset 0x30 */ ++ /* already remapped for us */ ++ gpmc_cs_base_add = (GPMC_CONFIG_CS0 + (cs * 0x30)); ++ /* xloader/Uboot would have written the NAND type for us ++ * NOTE: This is a temporary measure and cannot handle ONENAND. ++ * The proper way of doing this is to pass the setup of ++ * u-boot up to kernel using kernel params - something on ++ * the lines of machineID ++ */ ++ /* Check if NAND type is set */ ++ if ((__raw_readl(gpmc_cs_base_add + GPMC_CONFIG1) & 0xC00) == ++ 0x800) { ++ /* Found it!! */ ++ break; ++ } ++ cs++; ++ } ++ if (cs > GPMC_MAX_CS) { ++ printf("NAND: Unable to find NAND settings in " \ ++ "GPMC Configuration - quitting\n"); ++ } ++ ++ gpmc_config = __raw_readl(GPMC_CONFIG); ++ /* Disable Write protect */ ++ gpmc_config |= 0x10; ++ __raw_writel(gpmc_config, GPMC_CONFIG); ++ ++ nand->IO_ADDR_R = (int *) gpmc_cs_base_add + GPMC_NAND_DAT; ++ nand->IO_ADDR_W = (int *) gpmc_cs_base_add + GPMC_NAND_CMD; ++ ++ nand->hwcontrol = omap_nand_hwcontrol; ++ nand->options = NAND_NO_PADDING | NAND_CACHEPRG | NAND_NO_AUTOINCR | ++ NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR; ++ nand->read_buf = omap_nand_read_buf; ++ nand->write_buf = omap_nand_write_buf; ++ nand->eccmode = NAND_ECC_SOFT; ++ /* if RDY/BSY line is connected to OMAP then use the omap ready ++ * function and the generic nand_wait function which reads the ++ * status register after monitoring the RDY/BSY line. Otherwise ++ * use a standard chip delay which is slightly more than tR ++ * (AC Timing) of the NAND device and read the status register ++ * until you get a failure or success ++ */ ++ nand->waitfunc = omap_nand_wait; ++ nand->chip_delay = 50; ++ ++ return 0; ++} ++#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ +diff --git a/board/omap3530beagle/omap3530beagle.c b/board/omap3530beagle/omap3530beagle.c +new file mode 100644 +index 0000000..1daf42c +--- /dev/null ++++ b/board/omap3530beagle/omap3530beagle.c +@@ -0,0 +1,781 @@ ++/* ++ * (C) Copyright 2004-2008 ++ * Texas Instruments, ++ * ++ * Author : ++ * Sunil Kumar ++ * Shashi Ranjan ++ * ++ * Derived from Beagle Board and 3430 SDP code by ++ * Richard Woodruff ++ * Syed Mohammed Khasim ++ * ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined(CFG_NAND_LEGACY) ++#include ++extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; ++#endif ++ ++/* ++ * Dummy functions to handle errors for EABI incompatibility ++ */ ++void raise(void) ++{ ++} ++ ++void abort(void) ++{ ++} ++ ++ ++/******************************************************* ++ * Routine: delay ++ * Description: spinning delay to use before udelay works ++ ******************************************************/ ++static inline void delay(unsigned long loops) ++{ ++ __asm__ volatile ("1:\n" "subs %0, %1, #1\n" ++ "bne 1b":"=r" (loops):"0"(loops)); ++} ++ ++/***************************************** ++ * Routine: board_init ++ * Description: Early hardware init. ++ *****************************************/ ++int board_init(void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ ++ gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE; /* board id for Linux */ ++ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); /* boot param addr */ ++ ++ return 0; ++} ++ ++/***************************************** ++ * Routine: secure_unlock ++ * Description: Setup security registers for access ++ * (GP Device only) ++ *****************************************/ ++void secure_unlock_mem(void) ++{ ++ /* Permission values for registers -Full fledged permissions to all */ ++#define UNLOCK_1 0xFFFFFFFF ++#define UNLOCK_2 0x00000000 ++#define UNLOCK_3 0x0000FFFF ++ /* Protection Module Register Target APE (PM_RT) */ ++ __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); ++ __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); ++ __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); ++ __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); ++ ++ __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); ++ __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); ++ __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); ++ ++ __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); ++ __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); ++ __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); ++ __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); ++ ++ /* IVA Changes */ ++ __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); ++ __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); ++ __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); ++ ++ __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ ++} ++ ++/********************************************************** ++ * Routine: secureworld_exit() ++ * Description: If chip is EMU and boot type is external ++ * configure secure registers and exit secure world ++ * general use. ++ ***********************************************************/ ++void secureworld_exit() ++{ ++ unsigned long i; ++ ++ /* configrue non-secure access control register */ ++ __asm__ __volatile__("mrc p15, 0, %0, c1, c1, 2":"=r"(i)); ++ /* enabling co-processor CP10 and CP11 accesses in NS world */ ++ __asm__ __volatile__("orr %0, %0, #0xC00":"=r"(i)); ++ /* allow allocation of locked TLBs and L2 lines in NS world */ ++ /* allow use of PLE registers in NS world also */ ++ __asm__ __volatile__("orr %0, %0, #0x70000":"=r"(i)); ++ __asm__ __volatile__("mcr p15, 0, %0, c1, c1, 2":"=r"(i)); ++ ++ /* Enable ASA in ACR register */ ++ __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i)); ++ __asm__ __volatile__("orr %0, %0, #0x10":"=r"(i)); ++ __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i)); ++ ++ /* Exiting secure world */ ++ __asm__ __volatile__("mrc p15, 0, %0, c1, c1, 0":"=r"(i)); ++ __asm__ __volatile__("orr %0, %0, #0x31":"=r"(i)); ++ __asm__ __volatile__("mcr p15, 0, %0, c1, c1, 0":"=r"(i)); ++} ++ ++/********************************************************** ++ * Routine: setup_auxcr() ++ * Description: Write to AuxCR desired value using SMI. ++ * general use. ++ ***********************************************************/ ++void setup_auxcr() ++{ ++ unsigned long i; ++ volatile unsigned int j; ++ /* Save r0, r12 and restore them after usage */ ++ __asm__ __volatile__("mov %0, r12":"=r"(j)); ++ __asm__ __volatile__("mov %0, r0":"=r"(i)); ++ ++ /* GP Device ROM code API usage here */ ++ /* r12 = AUXCR Write function and r0 value */ ++ __asm__ __volatile__("mov r12, #0x3"); ++ __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1"); ++ /* Enabling ASA */ ++ __asm__ __volatile__("orr r0, r0, #0x10"); ++ /* SMI instruction to call ROM Code API */ ++ __asm__ __volatile__(".word 0xE1600070"); ++ __asm__ __volatile__("mov r0, %0":"=r"(i)); ++ __asm__ __volatile__("mov r12, %0":"=r"(j)); ++} ++ ++/********************************************************** ++ * Routine: try_unlock_sram() ++ * Description: If chip is GP/EMU(special) type, unlock the SRAM for ++ * general use. ++ ***********************************************************/ ++void try_unlock_memory() ++{ ++ int mode; ++ int in_sdram = running_in_sdram(); ++ ++ /* if GP device unlock device SRAM for general use */ ++ /* secure code breaks for Secure/Emulation device - HS/E/T */ ++ mode = get_device_type(); ++ if (mode == GP_DEVICE) { ++ secure_unlock_mem(); ++ } ++ /* If device is EMU and boot is XIP external booting ++ * Unlock firewalls and disable L2 and put chip ++ * out of secure world ++ */ ++ /* Assuming memories are unlocked by the demon who put us in SDRAM */ ++ if ((mode <= EMU_DEVICE) && (get_boot_type() == 0x1F) ++ && (!in_sdram)) { ++ secure_unlock_mem(); ++ secureworld_exit(); ++ } ++ ++ return; ++} ++ ++/********************************************************** ++ * Routine: s_init ++ * Description: Does early system init of muxing and clocks. ++ * - Called path is with SRAM stack. ++ **********************************************************/ ++void s_init(void) ++{ ++ int in_sdram = running_in_sdram(); ++ ++#ifdef CONFIG_3430VIRTIO ++ in_sdram = 0; /* allow setup from memory for Virtio */ ++#endif ++ watchdog_init(); ++ ++ try_unlock_memory(); ++ ++ /* Right now flushing at low MPU speed. Need to move after clock init */ ++ v7_flush_dcache_all(get_device_type()); ++#ifndef CONFIG_ICACHE_OFF ++ icache_enable(); ++#endif ++ ++#ifdef CONFIG_L2_OFF ++ l2cache_disable(); ++#else ++ l2cache_enable(); ++#endif ++ /* Writing to AuxCR in U-boot using SMI for GP DEV */ ++ /* Currently SMI in Kernel on ES2 devices seems to have an isse ++ * Once that is resolved, we can postpone this config to kernel ++ */ ++ if (get_device_type() == GP_DEVICE) ++ setup_auxcr(); ++ ++ set_muxconf_regs(); ++ delay(100); ++ ++ prcm_init(); ++ ++ per_clocks_enable(); ++ ++ if (!in_sdram) ++ sdrc_init(); ++} ++/******************************************************* ++ * Routine: misc_init_r ++ * Description: Init ethernet (done here so udelay works) ++ ********************************************************/ ++int misc_init_r(void) ++{ ++ unsigned char byte; ++ ++#ifdef CONFIG_DRIVER_OMAP34XX_I2C ++ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); ++#endif ++ byte = 0x20; ++ i2c_write(0x4B, 0x7A, 1, &byte, 1); ++ byte = 0x03; ++ i2c_write(0x4B, 0x7D, 1, &byte, 1); ++ byte = 0xE0; ++ i2c_write(0x4B, 0x8E, 1, &byte, 1); ++ byte = 0x05; ++ i2c_write(0x4B, 0x91, 1, &byte, 1); ++ byte = 0x20; ++ i2c_write(0x4B, 0x96, 1, &byte, 1); ++ byte = 0x03; ++ i2c_write(0x4B, 0x99, 1, &byte, 1); ++ byte = 0x33; ++ i2c_write(0x4A, 0xEE, 1, &byte, 1); ++ ++ *((uint *) 0x49058034) = 0xFFFFFAF9; ++ *((uint *) 0x49056034) = 0x0F9F0FFF; ++ *((uint *) 0x49058094) = 0x00000506; ++ *((uint *) 0x49056094) = 0xF060F000; ++ ++ return (0); ++} ++ ++/****************************************************** ++ * Routine: wait_for_command_complete ++ * Description: Wait for posting to finish on watchdog ++ ******************************************************/ ++void wait_for_command_complete(unsigned int wd_base) ++{ ++ int pending = 1; ++ do { ++ pending = __raw_readl(wd_base + WWPS); ++ } while (pending); ++} ++ ++/**************************************** ++ * Routine: watchdog_init ++ * Description: Shut down watch dogs ++ *****************************************/ ++void watchdog_init(void) ++{ ++ /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is ++ * either taken care of by ROM (HS/EMU) or not accessible (GP). ++ * We need to take care of WD2-MPU or take a PRCM reset. WD3 ++ * should not be running and does not generate a PRCM reset. ++ */ ++ ++ sr32(CM_FCLKEN_WKUP, 5, 1, 1); ++ sr32(CM_ICLKEN_WKUP, 5, 1, 1); ++ wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ ++ ++ __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); ++ wait_for_command_complete(WD2_BASE); ++ __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); ++} ++ ++/******************************************************************* ++ * Routine:ether_init ++ * Description: take the Ethernet controller out of reset and wait ++ * for the EEPROM load to complete. ++ ******************************************************************/ ++void ether_init(void) ++{ ++#ifdef CONFIG_DRIVER_LAN91C96 ++ int cnt = 20; ++ ++ __raw_writew(0x0, LAN_RESET_REGISTER); ++ do { ++ __raw_writew(0x1, LAN_RESET_REGISTER); ++ udelay(100); ++ if (cnt == 0) ++ goto h4reset_err_out; ++ --cnt; ++ } while (__raw_readw(LAN_RESET_REGISTER) != 0x1); ++ ++ cnt = 20; ++ ++ do { ++ __raw_writew(0x0, LAN_RESET_REGISTER); ++ udelay(100); ++ if (cnt == 0) ++ goto h4reset_err_out; ++ --cnt; ++ } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000); ++ udelay(1000); ++ ++ *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; ++ udelay(1000); ++ ++ h4reset_err_out: ++ return; ++#endif ++} ++ ++/********************************************** ++ * Routine: dram_init ++ * Description: sets uboots idea of sdram size ++ **********************************************/ ++int dram_init(void) ++{ ++#define NOT_EARLY 0 ++ DECLARE_GLOBAL_DATA_PTR; ++ unsigned int size0 = 0, size1 = 0; ++ u32 mtype, btype; ++ ++ btype = get_board_type(); ++ mtype = get_mem_type(); ++#ifndef CONFIG_3430ZEBU ++ /* fixme... dont know why this func is crashing in ZeBu */ ++ display_board_info(btype); ++#endif ++ /* If a second bank of DDR is attached to CS1 this is ++ * where it can be started. Early init code will init ++ * memory on CS0. ++ */ ++ if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) { ++ do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); ++ } ++ size0 = get_sdr_cs_size(SDRC_CS0_OSET); ++ size1 = get_sdr_cs_size(SDRC_CS1_OSET); ++ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = size0; ++ gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0; ++ gd->bd->bi_dram[1].size = size1; ++ ++ return 0; ++} ++ ++#define MUX_VAL(OFFSET,VALUE)\ ++ __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); ++ ++#define CP(x) (CONTROL_PADCONF_##x) ++/* ++ * IEN - Input Enable ++ * IDIS - Input Disable ++ * PTD - Pull type Down ++ * PTU - Pull type Up ++ * DIS - Pull type selection is inactive ++ * EN - Pull type selection is active ++ * M0 - Mode 0 ++ * The commented string gives the final mux configuration for that pin ++ */ ++#define MUX_DEFAULT_ES2()\ ++ /*SDRC*/\ ++ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ ++ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ ++ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ ++ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ ++ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ ++ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ ++ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ ++ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ ++ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ ++ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ ++ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ ++ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ ++ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ ++ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ ++ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ ++ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ ++ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ ++ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ ++ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ ++ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ ++ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ ++ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ ++ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ ++ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ ++ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ ++ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ ++ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ ++ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ ++ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ ++ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ ++ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ ++ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ ++ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ ++ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ ++ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ ++ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ ++ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ ++ /*GPMC*/\ ++ MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ ++ MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ ++ MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ ++ MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ ++ MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ ++ MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ ++ MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ ++ MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ ++ MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ ++ MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ ++ MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ ++ MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ ++ MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ ++ MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ ++ MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ ++ MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ ++ MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ ++ MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ ++ MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ ++ MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ ++ MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ ++ MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ ++ MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ ++ MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ ++ MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ ++ MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ ++ MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ ++ MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ ++ MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ ++ MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ ++ /* For Beagle Rev 1 boards */\ ++ /*MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0))\ ++ MUX_VAL(CP(GPMC_nCS5), (IDIS | PTU | EN | M0))\ ++ MUX_VAL(CP(GPMC_nCS6), (IDIS | PTU | EN | M0))\ ++ MUX_VAL(CP(GPMC_nCS7), (IDIS | PTU | EN | M0))\ ++ MUX_VAL(CP(GPMC_nBE1), (IDIS | PTD | DIS | M4))\ ++ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4))\ ++ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4))*/\ ++ /* For Beagle Rev 2 boards*/\ ++ MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0))\ ++ MUX_VAL(CP(GPMC_nCS5), (IDIS | PTD | DIS | M0))\ ++ MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | DIS | M1))\ ++ MUX_VAL(CP(GPMC_nCS7), (IEN | PTU | EN | M1))\ ++ MUX_VAL(CP(GPMC_nBE1), (IEN | PTD | DIS | M0))\ ++ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0))\ ++ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0))\ ++ /* till here */\ ++ MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ ++ MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ ++ MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ ++ MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ ++ MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ ++ MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ ++ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ ++ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ ++ /*DSS*/\ ++ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ ++ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ ++ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ ++ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ ++ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ ++ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ ++ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ ++ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ ++ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ ++ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ ++ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ ++ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ ++ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ ++ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ ++ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ ++ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ ++ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ ++ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ ++ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ ++ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ ++ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ ++ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ ++ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ ++ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ ++ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ ++ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ ++ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ ++ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ ++ /*CAMERA*/\ ++ MUX_VAL(CP(CAM_HS ), (IEN | PTU | EN | M0)) /*CAM_HS */\ ++ MUX_VAL(CP(CAM_VS ), (IEN | PTU | EN | M0)) /*CAM_VS */\ ++ MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ ++ MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ ++ MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98 - CAM_RESET*/\ ++ MUX_VAL(CP(CAM_D0 ), (IEN | PTD | DIS | M0)) /*CAM_D0 */\ ++ MUX_VAL(CP(CAM_D1 ), (IEN | PTD | DIS | M0)) /*CAM_D1 */\ ++ MUX_VAL(CP(CAM_D2 ), (IEN | PTD | DIS | M0)) /*CAM_D2 */\ ++ MUX_VAL(CP(CAM_D3 ), (IEN | PTD | DIS | M0)) /*CAM_D3 */\ ++ MUX_VAL(CP(CAM_D4 ), (IEN | PTD | DIS | M0)) /*CAM_D4 */\ ++ MUX_VAL(CP(CAM_D5 ), (IEN | PTD | DIS | M0)) /*CAM_D5 */\ ++ MUX_VAL(CP(CAM_D6 ), (IEN | PTD | DIS | M0)) /*CAM_D6 */\ ++ MUX_VAL(CP(CAM_D7 ), (IEN | PTD | DIS | M0)) /*CAM_D7 */\ ++ MUX_VAL(CP(CAM_D8 ), (IEN | PTD | DIS | M0)) /*CAM_D8 */\ ++ MUX_VAL(CP(CAM_D9 ), (IEN | PTD | DIS | M0)) /*CAM_D9 */\ ++ MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ ++ MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ ++ MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ ++ MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ ++ MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ ++ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ ++ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ ++ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ ++ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ ++ /*Audio Interface */\ ++ MUX_VAL(CP(McBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ ++ MUX_VAL(CP(McBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ ++ MUX_VAL(CP(McBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ ++ MUX_VAL(CP(McBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ ++ /*Expansion card */\ ++ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ ++ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ ++ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ ++ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ ++ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ ++ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ ++ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ ++ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ ++ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ ++ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ ++ /*Wireless LAN */\ ++ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ ++ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ ++ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ ++ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ ++ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ ++ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ ++ MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ ++ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ ++ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ ++ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ ++ /*Bluetooth*/\ ++ MUX_VAL(CP(McBSP3_DX), (IDIS | PTD | DIS | M4)) /*GPIO_140*/\ ++ MUX_VAL(CP(McBSP3_DR), (IDIS | PTD | DIS | M4)) /*GPIO_142*/\ ++ MUX_VAL(CP(McBSP3_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_141*/\ ++ MUX_VAL(CP(McBSP3_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_143*/\ ++ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\ ++ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ ++ MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/\ ++ MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) /*UART2_RX*/\ ++ /*Modem Interface */\ ++ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ ++ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/\ ++ MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/\ ++ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ ++ MUX_VAL(CP(McBSP4_CLKX), (IEN | PTD | DIS | M1)) /*SSI1_DAT_RX */\ ++ MUX_VAL(CP(McBSP4_DR), (IEN | PTD | DIS | M1)) /*SSI1_FLAG_RX */\ ++ MUX_VAL(CP(McBSP4_DX), (IEN | PTD | DIS | M1)) /*SSI1_RDY_RX */\ ++ MUX_VAL(CP(McBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\ ++ MUX_VAL(CP(McBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ ++ MUX_VAL(CP(McBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157 - BT_WAKEUP*/\ ++ MUX_VAL(CP(McBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\ ++ MUX_VAL(CP(McBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ ++ MUX_VAL(CP(McBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS */\ ++ MUX_VAL(CP(McBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ ++ MUX_VAL(CP(McBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162 */\ ++ /*Serial Interface*/\ ++ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\ ++ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ ++ MUX_VAL(CP(UART3_RX_IRRX ), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ ++ MUX_VAL(CP(UART3_TX_IRTX ), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ ++ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ ++ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ ++ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ ++ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ ++ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0 */\ ++ MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1 */\ ++ MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2 */\ ++ MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3 */\ ++ MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4 */\ ++ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5 */\ ++ MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6 */\ ++ MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7 */\ ++ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ ++ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ ++ MUX_VAL(CP(I2C2_SCL), (IDIS | PTU | DIS | M4)) /*GPIO_168*/\ ++ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ ++ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ ++ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ ++ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ ++ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ ++ MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*HDQ_SIO*/\ ++ MUX_VAL(CP(McSPI1_CLK), (IEN | PTD | DIS | M0)) /*McSPI1_CLK*/\ ++ MUX_VAL(CP(McSPI1_SIMO), (IEN | PTD | DIS | M0)) /*McSPI1_SIMO */\ ++ MUX_VAL(CP(McSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI */\ ++ MUX_VAL(CP(McSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\ ++ MUX_VAL(CP(McSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\ ++ MUX_VAL(CP(McSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176 - NOR_DPD*/\ ++ MUX_VAL(CP(McSPI1_CS3), (IEN | PTD | EN | M0)) /*McSPI1_CS3*/\ ++ MUX_VAL(CP(McSPI2_CLK), (IEN | PTD | DIS | M0)) /*McSPI2_CLK*/\ ++ MUX_VAL(CP(McSPI2_SIMO), (IEN | PTD | DIS | M0)) /*McSPI2_SIMO*/\ ++ MUX_VAL(CP(McSPI2_SOMI), (IEN | PTD | DIS | M0)) /*McSPI2_SOMI*/\ ++ MUX_VAL(CP(McSPI2_CS0), (IEN | PTD | EN | M0)) /*McSPI2_CS0*/\ ++ MUX_VAL(CP(McSPI2_CS1), (IEN | PTD | EN | M0)) /*McSPI2_CS1*/\ ++ /*Control and debug */\ ++ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ ++ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ ++ MUX_VAL(CP(SYS_nIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ ++ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 - PEN_IRQ */\ ++ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ ++ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP */\ ++ MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 - LCD_ENVDD*/\ ++ MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 - LAN_INTR0*/\ ++ MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 - MMC2_WP*/\ ++ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8 - LCD_ENBKL*/\ ++ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE */\ ++ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1 */\ ++ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ ++ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\ ++ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB1_CLK*/\ ++ MUX_VAL(CP(ETK_D0_ES2 ), (IEN | PTD | DIS | M3)) /*HSUSB1_DATA0*/\ ++ MUX_VAL(CP(ETK_D1_ES2 ), (IEN | PTD | DIS | M3)) /*HSUSB1_DATA1*/\ ++ MUX_VAL(CP(ETK_D2_ES2 ), (IEN | PTD | DIS | M3)) /*HSUSB1_DATA2*/\ ++ MUX_VAL(CP(ETK_D3_ES2 ), (IEN | PTD | DIS | M3)) /*HSUSB1_DATA7*/\ ++ MUX_VAL(CP(ETK_D4_ES2 ), (IEN | PTD | DIS | M3)) /*HSUSB1_DATA4*/\ ++ MUX_VAL(CP(ETK_D5_ES2 ), (IEN | PTD | DIS | M3)) /*HSUSB1_DATA5*/\ ++ MUX_VAL(CP(ETK_D6_ES2 ), (IEN | PTD | DIS | M3)) /*HSUSB1_DATA6*/\ ++ MUX_VAL(CP(ETK_D7_ES2 ), (IEN | PTD | DIS | M3)) /*HSUSB1_DATA3*/\ ++ MUX_VAL(CP(ETK_D8_ES2 ), (IEN | PTD | DIS | M3)) /*HSUSB1_DIR*/\ ++ MUX_VAL(CP(ETK_D9_ES2 ), (IEN | PTD | DIS | M3)) /*HSUSB1_NXT*/\ ++ MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | EN | M4)) /*GPIO_24*/\ ++ MUX_VAL(CP(ETK_D15), (IEN | PTU | EN | M4)) /*GPIO_29*/\ ++ MUX_VAL(CP(d2d_mcad1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ ++ MUX_VAL(CP(d2d_mcad2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ ++ MUX_VAL(CP(d2d_mcad3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ ++ MUX_VAL(CP(d2d_mcad4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ ++ MUX_VAL(CP(d2d_mcad5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ ++ MUX_VAL(CP(d2d_mcad6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ ++ MUX_VAL(CP(d2d_mcad7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ ++ MUX_VAL(CP(d2d_mcad8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ ++ MUX_VAL(CP(d2d_mcad9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ ++ MUX_VAL(CP(d2d_mcad10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ ++ MUX_VAL(CP(d2d_mcad11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ ++ MUX_VAL(CP(d2d_mcad12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ ++ MUX_VAL(CP(d2d_mcad13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ ++ MUX_VAL(CP(d2d_mcad14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ ++ MUX_VAL(CP(d2d_mcad15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ ++ MUX_VAL(CP(d2d_mcad16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ ++ MUX_VAL(CP(d2d_mcad17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ ++ MUX_VAL(CP(d2d_mcad18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ ++ MUX_VAL(CP(d2d_mcad19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ ++ MUX_VAL(CP(d2d_mcad20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ ++ MUX_VAL(CP(d2d_mcad21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ ++ MUX_VAL(CP(d2d_mcad22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ ++ MUX_VAL(CP(d2d_mcad23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ ++ MUX_VAL(CP(d2d_mcad24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ ++ MUX_VAL(CP(d2d_mcad25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ ++ MUX_VAL(CP(d2d_mcad26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ ++ MUX_VAL(CP(d2d_mcad27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ ++ MUX_VAL(CP(d2d_mcad28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ ++ MUX_VAL(CP(d2d_mcad29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ ++ MUX_VAL(CP(d2d_mcad30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ ++ MUX_VAL(CP(d2d_mcad31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ ++ MUX_VAL(CP(d2d_mcad32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ ++ MUX_VAL(CP(d2d_mcad33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ ++ MUX_VAL(CP(d2d_mcad34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ ++ MUX_VAL(CP(d2d_mcad35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ ++ MUX_VAL(CP(d2d_mcad36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ ++ MUX_VAL(CP(d2d_clk26mi), (IEN | PTD | DIS | M0)) /*d2d_clk26mi */\ ++ MUX_VAL(CP(d2d_nrespwron ), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ ++ MUX_VAL(CP(d2d_nreswarm), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\ ++ MUX_VAL(CP(d2d_arm9nirq), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\ ++ MUX_VAL(CP(d2d_uma2p6fiq ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ ++ MUX_VAL(CP(d2d_spint), (IEN | PTD | EN | M0)) /*d2d_spint*/\ ++ MUX_VAL(CP(d2d_frint), (IEN | PTD | EN | M0)) /*d2d_frint*/\ ++ MUX_VAL(CP(d2d_dmareq0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0 */\ ++ MUX_VAL(CP(d2d_dmareq1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1 */\ ++ MUX_VAL(CP(d2d_dmareq2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2 */\ ++ MUX_VAL(CP(d2d_dmareq3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3 */\ ++ MUX_VAL(CP(d2d_n3gtrst), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst */\ ++ MUX_VAL(CP(d2d_n3gtdi), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ ++ MUX_VAL(CP(d2d_n3gtdo), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ ++ MUX_VAL(CP(d2d_n3gtms), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ ++ MUX_VAL(CP(d2d_n3gtck), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ ++ MUX_VAL(CP(d2d_n3grtck), (IEN | PTD | DIS | M0)) /*d2d_n3grtck */\ ++ MUX_VAL(CP(d2d_mstdby), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ ++ MUX_VAL(CP(d2d_swakeup), (IEN | PTD | EN | M0)) /*d2d_swakeup */\ ++ MUX_VAL(CP(d2d_idlereq), (IEN | PTD | DIS | M0)) /*d2d_idlereq */\ ++ MUX_VAL(CP(d2d_idleack), (IEN | PTU | EN | M0)) /*d2d_idleack */\ ++ MUX_VAL(CP(d2d_mwrite), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ ++ MUX_VAL(CP(d2d_swrite), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ ++ MUX_VAL(CP(d2d_mread), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ ++ MUX_VAL(CP(d2d_sread), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ ++ MUX_VAL(CP(d2d_mbusflag), (IEN | PTD | DIS | M0)) /*d2d_mbusflag */\ ++ MUX_VAL(CP(d2d_sbusflag), (IEN | PTD | DIS | M0)) /*d2d_sbusflag */\ ++ MUX_VAL(CP(sdrc_cke0), (IDIS | PTU | EN | M0)) /*sdrc_cke0 */\ ++ MUX_VAL(CP(sdrc_cke1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1 not used */ ++ ++/********************************************************** ++ * Routine: set_muxconf_regs ++ * Description: Setting up the configuration Mux registers ++ * specific to the hardware. Many pins need ++ * to be moved from protect to primary mode. ++ *********************************************************/ ++void set_muxconf_regs(void) ++{ ++ MUX_DEFAULT_ES2(); ++} ++ ++/****************************************************************************** ++ * Routine: update_mux() ++ * Description:Update balls which are different between boards. All should be ++ * updated to match functionality. However, I'm only updating ones ++ * which I'll be using for now. When power comes into play they ++ * all need updating. ++ *****************************************************************************/ ++void update_mux(u32 btype, u32 mtype) ++{ ++ /* NOTHING as of now... */ ++} ++ ++#if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined(CFG_NAND_LEGACY) ++/********************************************************** ++ * Routine: nand+_init ++ * Description: Set up nand for nand and jffs2 commands ++ *********************************************************/ ++void nand_init(void) ++{ ++ extern flash_info_t flash_info[]; ++ ++ nand_probe(CFG_NAND_ADDR); ++ if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { ++ print_size(nand_dev_desc[0].totlen, "\n"); ++ } ++#ifdef CFG_JFFS2_MEM_NAND ++ flash_info[CFG_JFFS2_FIRST_BANK].flash_id = nand_dev_desc[0].id; ++ /* only read kernel single meg partition */ ++ flash_info[CFG_JFFS2_FIRST_BANK].size = 1024 * 1024 * 2; ++ /* 1024 blocks in 16meg chip (use less for raw/copied partition) */ ++ flash_info[CFG_JFFS2_FIRST_BANK].sector_count = 1024; ++ /* ?, ram for now, open question, copy to RAM or adapt for NAND */ ++ flash_info[CFG_JFFS2_FIRST_BANK].start[0] = 0x80200000; ++#endif ++} ++#endif +diff --git a/board/omap3530beagle/sys_info.c b/board/omap3530beagle/sys_info.c +new file mode 100644 +index 0000000..017bfaa +--- /dev/null ++++ b/board/omap3530beagle/sys_info.c +@@ -0,0 +1,315 @@ ++/* ++ * (C) Copyright 2008 ++ * Texas Instruments, ++ * ++ * Derived from Beagle Board and 3430 SDP code by ++ * Richard Woodruff ++ * Syed Mohammed Khasim ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include /* get mem tables */ ++#include ++#include ++#include ++ ++/************************************************************************** ++ * get_cpu_type() - Read the FPGA Debug registers and provide the DIP switch ++ * settings ++ * 1 is on ++ * 0 is off ++ * Will return Index of type of gpmc ++ ***************************************************************************/ ++u32 get_gpmc0_type(void) ++{ ++ // Default NAND ++ return (2); ++} ++ ++/**************************************************** ++ * get_cpu_type() - low level get cpu type ++ * - no C globals yet. ++ ****************************************************/ ++u32 get_cpu_type(void) ++{ ++ // fixme, need to get register defines for OMAP3 ++ return (CPU_3430); ++} ++ ++/****************************************** ++ * get_cpu_rev(void) - extract version info ++ ******************************************/ ++u32 get_cpu_rev(void) ++{ ++ u32 cpuid = 0; ++ /* On ES1.0 the IDCODE register is not exposed on L4 ++ * so using CPU ID to differentiate ++ * between ES2.0 and ES1.0. ++ */ ++ __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid)); ++ if ((cpuid & 0xf) == 0x0) ++ return CPU_3430_ES1; ++ else ++ return CPU_3430_ES2; ++ ++} ++ ++/**************************************************** ++ * is_mem_sdr() - return 1 if mem type in use is SDR ++ ****************************************************/ ++u32 is_mem_sdr(void) ++{ ++ volatile u32 *burst = (volatile u32 *) (SDRC_MR_0 + SDRC_CS0_OSET); ++ if (*burst == SDP_SDRC_MR_0_SDR) ++ return (1); ++ return (0); ++} ++ ++/*********************************************************** ++ * get_mem_type() - identify type of mDDR part used. ++ ***********************************************************/ ++u32 get_mem_type(void) ++{ ++ /* Current SDP3430 uses 2x16 MDDR Infenion parts */ ++ return (DDR_DISCRETE); ++} ++ ++/*********************************************************************** ++ * get_cs0_size() - get size of chip select 0/1 ++ ************************************************************************/ ++u32 get_sdr_cs_size(u32 offset) ++{ ++ u32 size; ++ ++ /* get ram size field */ ++ size = __raw_readl(SDRC_MCFG_0 + offset) >> 8; ++ size &= 0x3FF; /* remove unwanted bits */ ++ size *= SZ_2M; /* find size in MB */ ++ return (size); ++} ++ ++/*********************************************************************** ++ * get_board_type() - get board type based on current production stats. ++ * - NOTE-1-: 2 I2C EEPROMs will someday be populated with proper info. ++ * when they are available we can get info from there. This should ++ * be correct of all known boards up until today. ++ * - NOTE-2- EEPROMs are populated but they are updated very slowly. To ++ * avoid waiting on them we will use ES version of the chip to get info. ++ * A later version of the FPGA migth solve their speed issue. ++ ************************************************************************/ ++u32 get_board_type(void) ++{ ++ if (get_cpu_rev() == CPU_3430_ES2) ++ return SDP_3430_V2; ++ else ++ return SDP_3430_V1; ++} ++ ++/****************************************************************** ++ * get_sysboot_value() - get init word settings ++ ******************************************************************/ ++inline u32 get_sysboot_value(void) ++{ ++ return (0x0000003F & __raw_readl(CONTROL_STATUS)); ++} ++ ++/*************************************************************************** ++ * get_gpmc0_base() - Return current address hardware will be ++ * fetching from. The below effectively gives what is correct, its a bit ++ * mis-leading compared to the TRM. For the most general case the mask ++ * needs to be also taken into account this does work in practice. ++ * - for u-boot we currently map: ++ * -- 0 to nothing, ++ * -- 4 to flash ++ * -- 8 to enent ++ * -- c to wifi ++ ****************************************************************************/ ++u32 get_gpmc0_base(void) ++{ ++ u32 b; ++ ++ b = __raw_readl(GPMC_CONFIG_CS0 + GPMC_CONFIG7); ++ b &= 0x1F; /* keep base [5:0] */ ++ b = b << 24; /* ret 0x0b000000 */ ++ return (b); ++} ++ ++/******************************************************************* ++ * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand) ++ *******************************************************************/ ++u32 get_gpmc0_width(void) ++{ ++ return (WIDTH_16BIT); ++} ++ ++/************************************************************************* ++ * get_board_rev() - setup to pass kernel board revision information ++ * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) ++ *************************************************************************/ ++u32 get_board_rev(void) ++{ ++ return (0x20); ++} ++ ++/********************************************************************* ++ * display_board_info() - print banner with board info. ++ *********************************************************************/ ++void display_board_info(u32 btype) ++{ ++ char *bootmode[] = { ++ "NOR", ++ "ONND", ++ "NAND", ++ "P2a", ++ "NOR", ++ "NOR", ++ "P2a", ++ "P2b", ++ }; ++ u32 brev = get_board_rev(); ++ char cpu_3430s[] = "3530"; ++ char db_ver[] = "0.0"; /* board type */ ++ char mem_sdr[] = "mSDR"; /* memory type */ ++ char mem_ddr[] = "LPDDR"; ++ char t_tst[] = "TST"; /* security level */ ++ char t_emu[] = "EMU"; ++ char t_hs[] = "HS"; ++ char t_gp[] = "GP"; ++ char unk[] = "?"; ++#ifdef CONFIG_LED_INFO ++ char led_string[CONFIG_LED_LEN] = { 0 }; ++#endif ++ char p_l3[] = "165"; ++ char p_cpu[] = "2"; ++ ++ char *cpu_s, *db_s, *mem_s, *sec_s; ++ u32 cpu, rev, sec; ++ ++ rev = get_cpu_rev(); ++ cpu = get_cpu_type(); ++ sec = get_device_type(); ++ ++ if (is_mem_sdr()) ++ mem_s = mem_sdr; ++ else ++ mem_s = mem_ddr; ++ ++ cpu_s = cpu_3430s; ++ ++ db_s = db_ver; ++ db_s[0] += (brev >> 4) & 0xF; ++ db_s[2] += brev & 0xF; ++ ++ switch (sec) { ++ case TST_DEVICE: ++ sec_s = t_tst; ++ break; ++ case EMU_DEVICE: ++ sec_s = t_emu; ++ break; ++ case HS_DEVICE: ++ sec_s = t_hs; ++ break; ++ case GP_DEVICE: ++ sec_s = t_gp; ++ break; ++ default: ++ sec_s = unk; ++ } ++ ++ printf("OMAP%s-%s rev %d, CPU-OPP%s L3-%sMHz\n", cpu_s, sec_s, rev, ++ p_cpu, p_l3); ++ printf("OMAP3 Beagle Board + %s/%s\n", ++ mem_s, bootmode[get_gpmc0_type()]); ++ ++} ++ ++/******************************************************** ++ * get_base(); get upper addr of current execution ++ *******************************************************/ ++u32 get_base(void) ++{ ++ u32 val; ++ ++ __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory"); ++ val &= 0xF0000000; ++ val >>= 28; ++ return (val); ++} ++ ++/******************************************************** ++ * running_in_flash() - tell if currently running in ++ * flash. ++ *******************************************************/ ++u32 running_in_flash(void) ++{ ++ if (get_base() < 4) ++ return (1); /* in flash */ ++ ++ return (0); /* running in SRAM or SDRAM */ ++} ++ ++/******************************************************** ++ * running_in_sram() - tell if currently running in ++ * sram. ++ *******************************************************/ ++u32 running_in_sram(void) ++{ ++ if (get_base() == 4) ++ return (1); /* in SRAM */ ++ ++ return (0); /* running in FLASH or SDRAM */ ++} ++ ++/******************************************************** ++ * running_in_sdram() - tell if currently running in ++ * flash. ++ *******************************************************/ ++u32 running_in_sdram(void) ++{ ++ if (get_base() > 4) ++ return (1); /* in sdram */ ++ ++ return (0); /* running in SRAM or FLASH */ ++} ++ ++/*************************************************************** ++ * get_boot_type() - Is this an XIP type device or a stream one ++ * bits 4-0 specify type. Bit 5 sys mem/perif ++ ***************************************************************/ ++u32 get_boot_type(void) ++{ ++ u32 v; ++ ++ v = get_sysboot_value() & (BIT4 | BIT3 | BIT2 | BIT1 | BIT0); ++ return v; ++} ++ ++/************************************************************* ++ * get_device_type(): tell if GP/HS/EMU/TST ++ *************************************************************/ ++u32 get_device_type(void) ++{ ++ int mode; ++ ++ mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); ++ return (mode >>= 8); ++} +diff --git a/board/omap3530beagle/syslib.c b/board/omap3530beagle/syslib.c +new file mode 100644 +index 0000000..1eb5d95 +--- /dev/null ++++ b/board/omap3530beagle/syslib.c +@@ -0,0 +1,74 @@ ++/* ++ * (C) Copyright 2008 ++ * Texas Instruments, ++ * ++ * Richard Woodruff ++ * Syed Mohammed Khasim ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/************************************************************ ++ * sdelay() - simple spin loop. Will be constant time as ++ * its generally used in bypass conditions only. This ++ * is necessary until timers are accessible. ++ * ++ * not inline to increase chances its in cache when called ++ *************************************************************/ ++void sdelay(unsigned long loops) ++{ ++ __asm__ volatile ("1:\n" "subs %0, %1, #1\n" ++ "bne 1b":"=r" (loops):"0"(loops)); ++} ++ ++/***************************************************************** ++ * sr32 - clear & set a value in a bit range for a 32 bit address ++ *****************************************************************/ ++void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) ++{ ++ u32 tmp, msk = 0; ++ msk = 1 << num_bits; ++ --msk; ++ tmp = __raw_readl(addr) & ~(msk << start_bit); ++ tmp |= value << start_bit; ++ __raw_writel(tmp, addr); ++} ++ ++/********************************************************************* ++ * wait_on_value() - common routine to allow waiting for changes in ++ * volatile regs. ++ *********************************************************************/ ++u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) ++{ ++ u32 i = 0, val; ++ do { ++ ++i; ++ val = __raw_readl(read_addr) & read_bit_mask; ++ if (val == match_value) ++ return (1); ++ if (i == bound) ++ return (0); ++ } while (1); ++} +diff --git a/board/omap3530beagle/u-boot.lds b/board/omap3530beagle/u-boot.lds +new file mode 100644 +index 0000000..72f15f6 +--- /dev/null ++++ b/board/omap3530beagle/u-boot.lds +@@ -0,0 +1,63 @@ ++/* ++ * January 2004 - Changed to support H4 device ++ * Copyright (c) 2004 Texas Instruments ++ * ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/omap3/start.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } ++ __exidx_start = .; ++ .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } ++ __exidx_end = .; ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +diff --git a/cpu/omap3/Makefile b/cpu/omap3/Makefile +new file mode 100644 +index 0000000..097447a +--- /dev/null ++++ b/cpu/omap3/Makefile +@@ -0,0 +1,43 @@ ++# ++# (C) Copyright 2000-2003 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(CPU).a ++ ++START = start.o ++OBJS = interrupts.o cpu.o mmc.o ++ ++all: .depend $(START) $(LIB) ++ ++$(LIB): $(OBJS) ++ $(AR) crv $@ $(OBJS) ++ ++######################################################################### ++ ++.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ ++ ++sinclude .depend ++ ++######################################################################### +diff --git a/cpu/omap3/config.mk b/cpu/omap3/config.mk +new file mode 100644 +index 0000000..7551677 +--- /dev/null ++++ b/cpu/omap3/config.mk +@@ -0,0 +1,34 @@ ++# ++# (C) Copyright 2002 ++# Gary Jennejohn, DENX Software Engineering, ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ ++ -msoft-float ++ ++PLATFORM_CPPFLAGS += -march=armv7a ++# ========================================================================= ++# ++# Supply options according to compiler version ++# ++# ========================================================================= ++#PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) ++PLATFORM_CPPFLAGS +=$(call cc-option) ++PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) +diff --git a/cpu/omap3/cpu.c b/cpu/omap3/cpu.c +new file mode 100644 +index 0000000..d32a8cb +--- /dev/null ++++ b/cpu/omap3/cpu.c +@@ -0,0 +1,235 @@ ++/* ++ * (C) Copyright 2008 Texas Insturments ++ * ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH ++ * Marius Groeger ++ * ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * CPU specific code ++ */ ++ ++#include ++#include ++#include ++#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) ++#include ++#endif ++#include ++ ++#ifdef CONFIG_USE_IRQ ++DECLARE_GLOBAL_DATA_PTR; ++#endif ++ ++#ifndef CONFIG_L2_OFF ++void l2cache_disable(void); ++#endif ++ ++/* read co-processor 15, register #1 (control register) */ ++static unsigned long read_p15_c1(void) ++{ ++ unsigned long value; ++ ++ __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 0 @ read control reg\n":"=r"(value) ++ ::"memory"); ++ return value; ++} ++ ++/* write to co-processor 15, register #1 (control register) */ ++static void write_p15_c1(unsigned long value) ++{ ++ __asm__ ++ __volatile__ ++ ("mcr p15, 0, %0, c1, c0, 0 @ write it back\n"::"r"(value) ++ : "memory"); ++ ++ read_p15_c1(); ++} ++ ++static void cp_delay(void) ++{ ++ volatile int i; ++ ++ /* Many OMAP regs need at least 2 nops */ ++ for (i = 0; i < 100; i++) ; ++} ++ ++/* See also ARM Ref. Man. */ ++#define C1_MMU (1<<0) /* mmu off/on */ ++#define C1_ALIGN (1<<1) /* alignment faults off/on */ ++#define C1_DC (1<<2) /* dcache off/on */ ++#define C1_WB (1<<3) /* merging write buffer on/off */ ++#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ ++#define C1_SYS_PROT (1<<8) /* system protection */ ++#define C1_ROM_PROT (1<<9) /* ROM protection */ ++#define C1_IC (1<<12) /* icache off/on */ ++#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ ++#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ ++ ++int cpu_init(void) ++{ ++ /* ++ * setup up stacks if necessary ++ */ ++#ifdef CONFIG_USE_IRQ ++ IRQ_STACK_START = ++ _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; ++ FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; ++#endif ++ return 0; ++} ++ ++int cleanup_before_linux(void) ++{ ++ /* ++ * this function is called just before we call linux ++ * it prepares the processor for linux ++ * ++ * we turn off caches etc ... ++ */ ++ disable_interrupts(); ++ ++#ifdef CONFIG_LCD ++ { ++ extern void lcd_disable(void); ++ extern void lcd_panel_disable(void); ++ ++ lcd_disable(); /* proper disable of lcd & panel */ ++ lcd_panel_disable(); ++ } ++#endif ++ ++ { ++ unsigned int i; ++ ++ /* turn off I/D-cache */ ++ asm("mrc p15, 0, %0, c1, c0, 0":"=r"(i)); ++ i &= ~(C1_DC | C1_IC); ++ asm("mcr p15, 0, %0, c1, c0, 0": :"r"(i)); ++ ++ /* invalidate I-cache */ ++ arm_cache_flush(); ++#ifndef CONFIG_L2_OFF ++ /* turn off L2 cache */ ++ l2cache_disable(); ++ /* invalidate L2 cache also */ ++ v7_flush_dcache_all(get_device_type()); ++#endif ++ i = 0; ++ /* mem barrier to sync up things */ ++ asm("mcr p15, 0, %0, c7, c10, 4": :"r"(i)); ++ ++#ifndef CONFIG_L2_OFF ++ l2cache_enable(); ++#endif ++ } ++ ++ return (0); ++} ++ ++int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) ++{ ++ disable_interrupts(); ++ reset_cpu(0); ++ /*NOTREACHED*/ return (0); ++} ++ ++void icache_enable(void) ++{ ++ ulong reg; ++ ++ reg = read_p15_c1(); /* get control reg. */ ++ cp_delay(); ++ write_p15_c1(reg | C1_IC); ++} ++ ++void icache_disable(void) ++{ ++ ulong reg; ++ ++ reg = read_p15_c1(); ++ cp_delay(); ++ write_p15_c1(reg & ~C1_IC); ++} ++ ++void l2cache_enable() ++{ ++ unsigned long i; ++ volatile unsigned int j; ++ ++ /* ES2 onwards we can disable/enable L2 ourselves */ ++ if (get_cpu_rev() == CPU_3430_ES2) { ++ __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i)); ++ __asm__ __volatile__("orr %0, %0, #0x2":"=r"(i)); ++ __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i)); ++ } else { ++ /* Save r0, r12 and restore them after usage */ ++ __asm__ __volatile__("mov %0, r12":"=r"(j)); ++ __asm__ __volatile__("mov %0, r0":"=r"(i)); ++ ++ /* GP Device ROM code API usage here */ ++ /* r12 = AUXCR Write function and r0 value */ ++ __asm__ __volatile__("mov r12, #0x3"); ++ __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1"); ++ __asm__ __volatile__("orr r0, r0, #0x2"); ++ /* SMI instruction to call ROM Code API */ ++ __asm__ __volatile__(".word 0xE1600070"); ++ __asm__ __volatile__("mov r0, %0":"=r"(i)); ++ __asm__ __volatile__("mov r12, %0":"=r"(j)); ++ } ++ ++} ++ ++void l2cache_disable() ++{ ++ unsigned long i; ++ volatile unsigned int j; ++ ++ /* ES2 onwards we can disable/enable L2 ourselves */ ++ if (get_cpu_rev() == CPU_3430_ES2) { ++ __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i)); ++ __asm__ __volatile__("bic %0, %0, #0x2":"=r"(i)); ++ __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i)); ++ } else { ++ /* Save r0, r12 and restore them after usage */ ++ __asm__ __volatile__("mov %0, r12":"=r"(j)); ++ __asm__ __volatile__("mov %0, r0":"=r"(i)); ++ ++ /* GP Device ROM code API usage here */ ++ /* r12 = AUXCR Write function and r0 value */ ++ __asm__ __volatile__("mov r12, #0x3"); ++ __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1"); ++ __asm__ __volatile__("bic r0, r0, #0x2"); ++ /* SMI instruction to call ROM Code API */ ++ __asm__ __volatile__(".word 0xE1600070"); ++ __asm__ __volatile__("mov r0, %0":"=r"(i)); ++ __asm__ __volatile__("mov r12, %0":"=r"(j)); ++ } ++} ++ ++int icache_status(void) ++{ ++ return (read_p15_c1() & C1_IC) != 0; ++} +diff --git a/cpu/omap3/interrupts.c b/cpu/omap3/interrupts.c +new file mode 100644 +index 0000000..007193a +--- /dev/null ++++ b/cpu/omap3/interrupts.c +@@ -0,0 +1,299 @@ ++/* ++ * (C) Copyright 2008 ++ * Texas Instruments ++ * ++ * Richard Woodruff ++ * Syed Moahmmed Khasim ++ * ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH ++ * Marius Groeger ++ * Alex Zuepke ++ * ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++ ++#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) ++# include ++#endif ++ ++#include ++ ++#define TIMER_LOAD_VAL 0 ++ ++/* macro to read the 32 bit timer */ ++#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR)) ++ ++#ifdef CONFIG_USE_IRQ ++/* enable IRQ interrupts */ ++void enable_interrupts(void) ++{ ++ unsigned long temp; ++ __asm__ __volatile__("mrs %0, cpsr\n" ++ "bic %0, %0, #0x80\n" "msr cpsr_c, %0":"=r"(temp) ++ ::"memory"); ++} ++ ++/* ++ * disable IRQ/FIQ interrupts ++ * returns true if interrupts had been enabled before we disabled them ++ */ ++int disable_interrupts(void) ++{ ++ unsigned long old, temp; ++ __asm__ __volatile__("mrs %0, cpsr\n" ++ "orr %1, %0, #0xc0\n" ++ "msr cpsr_c, %1":"=r"(old), "=r"(temp) ++ ::"memory"); ++ return (old & 0x80) == 0; ++} ++#else ++void enable_interrupts(void) ++{ ++ return; ++} ++int disable_interrupts(void) ++{ ++ return 0; ++} ++#endif ++ ++void bad_mode(void) ++{ ++ panic("Resetting CPU ...\n"); ++ reset_cpu(0); ++} ++ ++void show_regs(struct pt_regs *regs) ++{ ++ unsigned long flags; ++ const char *processor_modes[] = { ++ "USER_26", "FIQ_26", "IRQ_26", "SVC_26", ++ "UK4_26", "UK5_26", "UK6_26", "UK7_26", ++ "UK8_26", "UK9_26", "UK10_26", "UK11_26", ++ "UK12_26", "UK13_26", "UK14_26", "UK15_26", ++ "USER_32", "FIQ_32", "IRQ_32", "SVC_32", ++ "UK4_32", "UK5_32", "UK6_32", "ABT_32", ++ "UK8_32", "UK9_32", "UK10_32", "UND_32", ++ "UK12_32", "UK13_32", "UK14_32", "SYS_32", ++ }; ++ ++ flags = condition_codes(regs); ++ ++ printf("pc : [<%08lx>] lr : [<%08lx>]\n" ++ "sp : %08lx ip : %08lx fp : %08lx\n", ++ instruction_pointer(regs), ++ regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp); ++ printf("r10: %08lx r9 : %08lx r8 : %08lx\n", ++ regs->ARM_r10, regs->ARM_r9, regs->ARM_r8); ++ printf("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", ++ regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4); ++ printf("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", ++ regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0); ++ printf("Flags: %c%c%c%c", ++ flags & CC_N_BIT ? 'N' : 'n', ++ flags & CC_Z_BIT ? 'Z' : 'z', ++ flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v'); ++ printf(" IRQs %s FIQs %s Mode %s%s\n", ++ interrupts_enabled(regs) ? "on" : "off", ++ fast_interrupts_enabled(regs) ? "on" : "off", ++ processor_modes[processor_mode(regs)], ++ thumb_mode(regs) ? " (T)" : ""); ++} ++ ++void do_undefined_instruction(struct pt_regs *pt_regs) ++{ ++ printf("undefined instruction\n"); ++ show_regs(pt_regs); ++ bad_mode(); ++} ++ ++void do_software_interrupt(struct pt_regs *pt_regs) ++{ ++ printf("software interrupt\n"); ++ show_regs(pt_regs); ++ bad_mode(); ++} ++ ++void do_prefetch_abort(struct pt_regs *pt_regs) ++{ ++ printf("prefetch abort\n"); ++ show_regs(pt_regs); ++ bad_mode(); ++} ++ ++void do_data_abort(struct pt_regs *pt_regs) ++{ ++ printf("data abort\n"); ++ show_regs(pt_regs); ++ bad_mode(); ++} ++ ++void do_not_used(struct pt_regs *pt_regs) ++{ ++ printf("not used\n"); ++ show_regs(pt_regs); ++ bad_mode(); ++} ++ ++void do_fiq(struct pt_regs *pt_regs) ++{ ++ printf("fast interrupt request\n"); ++ show_regs(pt_regs); ++ bad_mode(); ++} ++ ++void do_irq(struct pt_regs *pt_regs) ++{ ++ printf("interrupt request\n"); ++ show_regs(pt_regs); ++ bad_mode(); ++} ++ ++#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR) ++/* Use the IntegratorCP function from board/integratorcp.c */ ++#else ++ ++static ulong timestamp; ++static ulong lastinc; ++ ++/* nothing really to do with interrupts, just starts up a counter. */ ++int interrupt_init(void) ++{ ++ int32_t val; ++ ++ /* Start the counter ticking up */ ++ *((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow */ ++ val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer */ ++ *((int32_t *) (CFG_TIMERBASE + TCLR)) = val; /* start timer */ ++ ++ reset_timer_masked(); /* init the timestamp and lastinc value */ ++ ++ return (0); ++} ++ ++/* ++ * timer without interrupts ++ */ ++void reset_timer(void) ++{ ++ reset_timer_masked(); ++} ++ ++ulong get_timer(ulong base) ++{ ++ return get_timer_masked() - base; ++} ++ ++void set_timer(ulong t) ++{ ++ timestamp = t; ++} ++ ++/* delay x useconds AND perserve advance timstamp value */ ++void udelay(unsigned long usec) ++{ ++ ulong tmo, tmp; ++ ++ if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ ++ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ ++ tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ ++ tmo /= 1000; /* finish normalize. */ ++ } else { /* else small number, don't kill it prior to HZ multiply */ ++ tmo = usec * CFG_HZ; ++ tmo /= (1000 * 1000); ++ } ++ ++ tmp = get_timer(0); /* get current timestamp */ ++ if ((tmo + tmp + 1) < tmp) /* if setting this forward will roll time stamp */ ++ reset_timer_masked(); /* reset "advancing" timestamp to 0, set lastinc value */ ++ else ++ tmo += tmp; /* else, set advancing stamp wake up time */ ++ while (get_timer_masked() < tmo) /* loop till event */ ++ /*NOP*/; ++} ++ ++void reset_timer_masked(void) ++{ ++ /* reset time */ ++ lastinc = READ_TIMER; /* capture current incrementer value time */ ++ timestamp = 0; /* start "advancing" time stamp from 0 */ ++} ++ ++ulong get_timer_masked(void) ++{ ++ ulong now = READ_TIMER; /* current tick value */ ++ ++ if (now >= lastinc) /* normal mode (non roll) */ ++ timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */ ++ else /* we have rollover of incrementer */ ++ timestamp += (0xFFFFFFFF - lastinc) + now; ++ lastinc = now; ++ return timestamp; ++} ++ ++/* waits specified delay value and resets timestamp */ ++void udelay_masked(unsigned long usec) ++{ ++ ulong tmo; ++ ulong endtime; ++ signed long diff; ++ ++ if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ ++ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ ++ tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ ++ tmo /= 1000; /* finish normalize. */ ++ } else { /* else small number, don't kill it prior to HZ multiply */ ++ tmo = usec * CFG_HZ; ++ tmo /= (1000 * 1000); ++ } ++ endtime = get_timer_masked() + tmo; ++ ++ do { ++ ulong now = get_timer_masked(); ++ diff = endtime - now; ++ } while (diff >= 0); ++} ++ ++/* ++ * This function is derived from PowerPC code (read timebase as long long). ++ * On ARM it just returns the timer value. ++ */ ++unsigned long long get_ticks(void) ++{ ++ return get_timer(0); ++} ++ ++/* ++ * This function is derived from PowerPC code (timebase clock frequency). ++ * On ARM it returns the number of timer ticks per second. ++ */ ++ulong get_tbclk(void) ++{ ++ ulong tbclk; ++ tbclk = CFG_HZ; ++ return tbclk; ++} ++#endif /* !Integrator/CP */ +diff --git a/cpu/omap3/mmc.c b/cpu/omap3/mmc.c +new file mode 100644 +index 0000000..ff6a50d +--- /dev/null ++++ b/cpu/omap3/mmc.c +@@ -0,0 +1,551 @@ ++/* ++ * (C) Copyright 2008 ++ * Texas Instruments, ++ * Syed Mohammed Khasim ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation's version 2 of ++ * the License. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include "mmc_host_def.h" ++#include "mmc_protocol.h" ++ ++extern int fat_register_device(block_dev_desc_t * dev_desc, int part_no); ++ ++mmc_card_data cur_card_data; ++static block_dev_desc_t mmc_blk_dev; ++ ++block_dev_desc_t *mmc_get_dev(int dev) ++{ ++ return ((block_dev_desc_t *) & mmc_blk_dev); ++} ++ ++void twl4030_mmc_config(void) ++{ ++ unsigned char data; ++ ++ data = 0x20; ++ i2c_write(0x4B, 0x82, 1, &data, 1); ++ data = 0x2; ++ i2c_write(0x4B, 0x85, 1, &data, 1); ++} ++ ++unsigned char mmc_board_init(void) ++{ ++ unsigned int value = 0; ++ ++ twl4030_mmc_config(); ++ ++ value = CONTROL_PBIAS_LITE; ++ CONTROL_PBIAS_LITE = value | (1 << 2) | (1 << 1) | (1 << 9); ++ ++ value = CONTROL_DEV_CONF0; ++ CONTROL_DEV_CONF0 = value | (1 << 24); ++ ++ return 1; ++} ++ ++void mmc_init_stream(void) ++{ ++ volatile unsigned int mmc_stat; ++ ++ OMAP_HSMMC_CON |= INIT_INITSTREAM; ++ ++ OMAP_HSMMC_CMD = MMC_CMD0; ++ do { ++ mmc_stat = OMAP_HSMMC_STAT; ++ } while (!(mmc_stat & CC_MASK)); ++ ++ OMAP_HSMMC_STAT = CC_MASK; ++ ++ OMAP_HSMMC_CMD = MMC_CMD0; ++ do { ++ mmc_stat = OMAP_HSMMC_STAT; ++ } while (!(mmc_stat & CC_MASK)); ++ ++ OMAP_HSMMC_STAT = OMAP_HSMMC_STAT; ++ OMAP_HSMMC_CON &= ~INIT_INITSTREAM; ++} ++ ++unsigned char mmc_clock_config(unsigned int iclk, unsigned short clk_div) ++{ ++ unsigned int val; ++ ++ mmc_reg_out(OMAP_HSMMC_SYSCTL, (ICE_MASK | DTO_MASK | CEN_MASK), ++ (ICE_STOP | DTO_15THDTO | CEN_DISABLE)); ++ ++ switch (iclk) { ++ case CLK_INITSEQ: ++ val = MMC_INIT_SEQ_CLK / 2; ++ break; ++ case CLK_400KHZ: ++ val = MMC_400kHz_CLK; ++ break; ++ case CLK_MISC: ++ val = clk_div; ++ break; ++ default: ++ return 0; ++ } ++ mmc_reg_out(OMAP_HSMMC_SYSCTL, ++ ICE_MASK | CLKD_MASK, (val << CLKD_OFFSET) | ICE_OSCILLATE); ++ ++ while ((OMAP_HSMMC_SYSCTL & ICS_MASK) == ICS_NOTREADY) { ++ } ++ ++ OMAP_HSMMC_SYSCTL |= CEN_ENABLE; ++ return 1; ++} ++ ++unsigned char mmc_init_setup(void) ++{ ++ unsigned int reg_val; ++ ++ mmc_board_init(); ++ ++ OMAP_HSMMC_SYSCONFIG |= MMC_SOFTRESET; ++ while ((OMAP_HSMMC_SYSSTATUS & RESETDONE) == 0) ; ++ ++ OMAP_HSMMC_SYSCTL |= SOFTRESETALL; ++ while ((OMAP_HSMMC_SYSCTL & SOFTRESETALL) != 0x0) ; ++ ++ OMAP_HSMMC_HCTL = DTW_1_BITMODE | SDBP_PWROFF | SDVS_3V0; ++ OMAP_HSMMC_CAPA |= VS30_3V0SUP | VS18_1V8SUP; ++ ++ reg_val = OMAP_HSMMC_CON & RESERVED_MASK; ++ ++ OMAP_HSMMC_CON = CTPL_MMC_SD | reg_val | WPP_ACTIVEHIGH | ++ CDP_ACTIVEHIGH | MIT_CTO | DW8_1_4BITMODE | MODE_FUNC | ++ STR_BLOCK | HR_NOHOSTRESP | INIT_NOINIT | NOOPENDRAIN; ++ ++ mmc_clock_config(CLK_INITSEQ, 0); ++ OMAP_HSMMC_HCTL |= SDBP_PWRON; ++ ++ OMAP_HSMMC_IE = 0x307f0033; ++ ++ mmc_init_stream(); ++ return 1; ++} ++ ++unsigned char mmc_send_cmd(unsigned int cmd, unsigned int arg, ++ unsigned int *response) ++{ ++ volatile unsigned int mmc_stat; ++ ++ while ((OMAP_HSMMC_PSTATE & DATI_MASK) == DATI_CMDDIS) { ++ } ++ ++ OMAP_HSMMC_BLK = BLEN_512BYTESLEN | NBLK_STPCNT; ++ OMAP_HSMMC_STAT = 0xFFFFFFFF; ++ OMAP_HSMMC_ARG = arg; ++ OMAP_HSMMC_CMD = cmd | CMD_TYPE_NORMAL | CICE_NOCHECK | ++ CCCE_NOCHECK | MSBS_SGLEBLK | ACEN_DISABLE | BCE_DISABLE | ++ DE_DISABLE; ++ ++ while (1) { ++ do { ++ mmc_stat = OMAP_HSMMC_STAT; ++ } while (mmc_stat == 0); ++ ++ if ((mmc_stat & ERRI_MASK) != 0) { ++ return (unsigned char) mmc_stat; ++ } ++ ++ if (mmc_stat & CC_MASK) { ++ OMAP_HSMMC_STAT = CC_MASK; ++ response[0] = OMAP_HSMMC_RSP10; ++ if ((cmd & RSP_TYPE_MASK) == RSP_TYPE_LGHT136) { ++ response[1] = OMAP_HSMMC_RSP32; ++ response[2] = OMAP_HSMMC_RSP54; ++ response[3] = OMAP_HSMMC_RSP76; ++ } ++ break; ++ } ++ } ++ return 1; ++} ++ ++unsigned char mmc_read_data(unsigned int *output_buf) ++{ ++ volatile unsigned int mmc_stat; ++ unsigned int read_count = 0; ++ ++ /* ++ * Start Polled Read ++ */ ++ while (1) { ++ do { ++ mmc_stat = OMAP_HSMMC_STAT; ++ } while (mmc_stat == 0); ++ ++ if ((mmc_stat & ERRI_MASK) != 0) ++ return (unsigned char) mmc_stat; ++ ++ if (mmc_stat & BRR_MASK) { ++ unsigned int k; ++ ++ OMAP_HSMMC_STAT |= BRR_MASK; ++ for (k = 0; k < MMCSD_SECTOR_SIZE / 4; k++) { ++ *output_buf = OMAP_HSMMC_DATA; ++ output_buf++; ++ read_count += 4; ++ } ++ } ++ ++ if (mmc_stat & BWR_MASK) ++ OMAP_HSMMC_STAT |= BWR_MASK; ++ ++ if (mmc_stat & TC_MASK) { ++ OMAP_HSMMC_STAT |= TC_MASK; ++ break; ++ } ++ } ++ return 1; ++} ++ ++unsigned char mmc_detect_card(mmc_card_data * mmc_card_cur) ++{ ++ unsigned char err; ++ unsigned int argument = 0; ++ unsigned int ocr_value, ocr_recvd, ret_cmd41, hcs_val; ++ unsigned int resp[4]; ++ unsigned short retry_cnt = 2000; ++ ++ /* Set to Initialization Clock */ ++ err = mmc_clock_config(CLK_400KHZ, 0); ++ if (err != 1) ++ return err; ++ ++ mmc_card_cur->RCA = MMC_RELATIVE_CARD_ADDRESS; ++ argument = 0x00000000; ++ ++ ocr_value = (0x1FF << 15); ++ err = mmc_send_cmd(MMC_CMD0, argument, resp); ++ if (err != 1) ++ return err; ++ ++ argument = SD_CMD8_CHECK_PATTERN | SD_CMD8_2_7_3_6_V_RANGE; ++ err = mmc_send_cmd(MMC_SDCMD8, argument, resp); ++ hcs_val = (err == 1) ? ++ MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR : ++ MMC_OCR_REG_HOST_CAPACITY_SUPPORT_BYTE; ++ ++ argument = 0x0000 << 16; ++ err = mmc_send_cmd(MMC_CMD55, argument, resp); ++ if (err == 1) { ++ mmc_card_cur->card_type = SD_CARD; ++ ocr_value |= hcs_val; ++ ret_cmd41 = MMC_ACMD41; ++ } else { ++ mmc_card_cur->card_type = MMC_CARD; ++ ocr_value |= MMC_OCR_REG_ACCESS_MODE_SECTOR; ++ ret_cmd41 = MMC_CMD1; ++ OMAP_HSMMC_CON &= ~OD; ++ OMAP_HSMMC_CON |= OPENDRAIN; ++ } ++ ++ argument = ocr_value; ++ err = mmc_send_cmd(ret_cmd41, argument, resp); ++ if (err != 1) { ++ return err; ++ } ++ ocr_recvd = ((mmc_resp_r3 *) resp)->ocr; ++ ++ while (!(ocr_recvd & (0x1 << 31)) && (retry_cnt > 0)) { ++ retry_cnt--; ++ if (mmc_card_cur->card_type == SD_CARD) { ++ argument = 0x0000 << 16; ++ err = mmc_send_cmd(MMC_CMD55, argument, resp); ++ } ++ ++ argument = ocr_value; ++ err = mmc_send_cmd(ret_cmd41, argument, resp); ++ if (err != 1) ++ return err; ++ ocr_recvd = ((mmc_resp_r3 *) resp)->ocr; ++ } ++ ++ if (!(ocr_recvd & (0x1 << 31))) ++ return 0; ++ ++ if (mmc_card_cur->card_type == MMC_CARD) { ++ if ((ocr_recvd & MMC_OCR_REG_ACCESS_MODE_MASK) == ++ MMC_OCR_REG_ACCESS_MODE_SECTOR) { ++ mmc_card_cur->mode = SECTOR_MODE; ++ } else { ++ mmc_card_cur->mode = BYTE_MODE; ++ } ++ ++ ocr_recvd &= ~MMC_OCR_REG_ACCESS_MODE_MASK; ++ } else { ++ if ((ocr_recvd & MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK) ++ == MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR) { ++ mmc_card_cur->mode = SECTOR_MODE; ++ } else { ++ mmc_card_cur->mode = BYTE_MODE; ++ } ++ ocr_recvd &= ~MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK; ++ } ++ ++ ocr_recvd &= ~(0x1 << 31); ++ if (!(ocr_recvd & ocr_value)) ++ return 0; ++ ++ err = mmc_send_cmd(MMC_CMD2, argument, resp); ++ if (err != 1) ++ return err; ++ ++ if (mmc_card_cur->card_type == MMC_CARD) { ++ argument = mmc_card_cur->RCA << 16; ++ err = mmc_send_cmd(MMC_CMD3, argument, resp); ++ if (err != 1) ++ return err; ++ } else { ++ argument = 0x00000000; ++ err = mmc_send_cmd(MMC_SDCMD3, argument, resp); ++ if (err != 1) ++ return err; ++ ++ mmc_card_cur->RCA = ((mmc_resp_r6 *) resp)->newpublishedrca; ++ } ++ ++ OMAP_HSMMC_CON &= ~OD; ++ OMAP_HSMMC_CON |= NOOPENDRAIN; ++ return 1; ++} ++ ++unsigned char mmc_read_cardsize(mmc_card_data * mmc_dev_data, ++ mmc_csd_reg_t * cur_csd) ++{ ++ mmc_extended_csd_reg_t ext_csd; ++ unsigned int size, count, blk_len, blk_no, card_size, argument; ++ unsigned char err; ++ unsigned int resp[4]; ++ ++ if (mmc_dev_data->mode == SECTOR_MODE) { ++ if (mmc_dev_data->card_type == SD_CARD) { ++ card_size = ++ (((mmc_sd2_csd_reg_t *) cur_csd)-> ++ c_size_lsb & MMC_SD2_CSD_C_SIZE_LSB_MASK) | ++ ((((mmc_sd2_csd_reg_t *) cur_csd)-> ++ c_size_msb & MMC_SD2_CSD_C_SIZE_MSB_MASK) ++ << MMC_SD2_CSD_C_SIZE_MSB_OFFSET); ++ mmc_dev_data->size = card_size * 1024; ++ if (mmc_dev_data->size == 0) ++ return 0; ++ } else { ++ argument = 0x00000000; ++ err = mmc_send_cmd(MMC_CMD8, argument, resp); ++ if (err != 1) ++ return err; ++ err = mmc_read_data((unsigned int *) &ext_csd); ++ if (err != 1) ++ return err; ++ mmc_dev_data->size = ext_csd.sectorcount; ++ ++ if (mmc_dev_data->size == 0) ++ mmc_dev_data->size = 8388608; ++ } ++ } else { ++ if (cur_csd->c_size_mult >= 8) ++ return 0; ++ ++ if (cur_csd->read_bl_len >= 12) ++ return 0; ++ ++ /* Compute size */ ++ count = 1 << (cur_csd->c_size_mult + 2); ++ card_size = (cur_csd->c_size_lsb & MMC_CSD_C_SIZE_LSB_MASK) | ++ ((cur_csd->c_size_msb & MMC_CSD_C_SIZE_MSB_MASK) ++ << MMC_CSD_C_SIZE_MSB_OFFSET); ++ blk_no = (card_size + 1) * count; ++ blk_len = 1 << cur_csd->read_bl_len; ++ size = blk_no * blk_len; ++ mmc_dev_data->size = size / MMCSD_SECTOR_SIZE; ++ if (mmc_dev_data->size == 0) ++ return 0; ++ } ++ return 1; ++} ++ ++unsigned char omap_mmc_read_sect(unsigned int start_sec, unsigned int num_bytes, ++ mmc_card_data * mmc_c, ++ unsigned long *output_buf) ++{ ++ unsigned char err; ++ unsigned int argument; ++ unsigned int resp[4]; ++ unsigned int num_sec_val = ++ (num_bytes + (MMCSD_SECTOR_SIZE - 1)) / MMCSD_SECTOR_SIZE; ++ unsigned int sec_inc_val; ++ ++ if (num_sec_val == 0) ++ return 1; ++ ++ if (mmc_c->mode == SECTOR_MODE) { ++ argument = start_sec; ++ sec_inc_val = 1; ++ } else { ++ argument = start_sec * MMCSD_SECTOR_SIZE; ++ sec_inc_val = MMCSD_SECTOR_SIZE; ++ } ++ ++ while (num_sec_val) { ++ err = mmc_send_cmd(MMC_CMD17, argument, resp); ++ if (err != 1) { ++ return err; ++ } ++ ++ err = mmc_read_data((unsigned int *) output_buf); ++ if (err != 1) { ++ return err; ++ } ++ output_buf += (MMCSD_SECTOR_SIZE / 4); ++ argument += sec_inc_val; ++ num_sec_val--; ++ } ++ return 1; ++} ++ ++unsigned char configure_mmc(mmc_card_data * mmc_card_cur) ++{ ++ unsigned char ret_val; ++ unsigned int argument; ++ unsigned int resp[4]; ++ unsigned int trans_clk, trans_fact, trans_unit, retries = 2; ++ mmc_csd_reg_t Card_CSD; ++ unsigned char trans_speed; ++ ++ ret_val = mmc_init_setup(); ++ ++ if (ret_val != 1) { ++ return ret_val; ++ } ++ ++ do { ++ ret_val = mmc_detect_card(mmc_card_cur); ++ retries--; ++ } while ((retries > 0) && (ret_val != 1)); ++ ++ argument = mmc_card_cur->RCA << 16; ++ ret_val = mmc_send_cmd(MMC_CMD9, argument, resp); ++ if (ret_val != 1) ++ return ret_val; ++ ++ ((unsigned int *) &Card_CSD)[3] = resp[3]; ++ ((unsigned int *) &Card_CSD)[2] = resp[2]; ++ ((unsigned int *) &Card_CSD)[1] = resp[1]; ++ ((unsigned int *) &Card_CSD)[0] = resp[0]; ++ ++ if (mmc_card_cur->card_type == MMC_CARD) { ++ mmc_card_cur->version = Card_CSD.spec_vers; ++ } ++ ++ trans_speed = Card_CSD.tran_speed; ++ ++ ret_val = mmc_send_cmd(MMC_CMD4, MMC_DSR_DEFAULT << 16, resp); ++ if (ret_val != 1) ++ return ret_val; ++ ++ trans_unit = trans_speed & MMC_CSD_TRAN_SPEED_UNIT_MASK; ++ trans_fact = trans_speed & MMC_CSD_TRAN_SPEED_FACTOR_MASK; ++ ++ if (trans_unit > MMC_CSD_TRAN_SPEED_UNIT_100MHZ) ++ return 0; ++ ++ if ((trans_fact < MMC_CSD_TRAN_SPEED_FACTOR_1_0) || ++ (trans_fact > MMC_CSD_TRAN_SPEED_FACTOR_8_0)) ++ return 0; ++ ++ trans_unit >>= 0; ++ trans_fact >>= 3; ++ ++ trans_clk = mmc_transspeed_val[trans_fact - 1][trans_unit] * 2; ++ ret_val = mmc_clock_config(CLK_MISC, trans_clk); ++ ++ if (ret_val != 1) ++ return ret_val; ++ ++ argument = mmc_card_cur->RCA << 16; ++ ret_val = mmc_send_cmd(MMC_CMD7_SELECT, argument, resp); ++ if (ret_val != 1) ++ return ret_val; ++ ++ /* Configure the block length to 512 bytes */ ++ argument = MMCSD_SECTOR_SIZE; ++ ret_val = mmc_send_cmd(MMC_CMD16, argument, resp); ++ if (ret_val != 1) ++ return ret_val; ++ ++ /* get the card size in sectors */ ++ ret_val = mmc_read_cardsize(mmc_card_cur, &Card_CSD); ++ if (ret_val != 1) ++ return ret_val; ++ ++ return 1; ++} ++unsigned long mmc_bread(int dev_num, unsigned long blknr, lbaint_t blkcnt, ++ void *dst) ++{ ++ omap_mmc_read_sect(blknr, (blkcnt * MMCSD_SECTOR_SIZE), &cur_card_data, ++ (unsigned long *) dst); ++ return 1; ++} ++ ++int mmc_init(int verbose) ++{ ++ configure_mmc(&cur_card_data); ++ ++ mmc_blk_dev.if_type = IF_TYPE_MMC; ++ mmc_blk_dev.part_type = PART_TYPE_DOS; ++ mmc_blk_dev.dev = 0; ++ mmc_blk_dev.lun = 0; ++ mmc_blk_dev.type = 0; ++ ++ /* FIXME fill in the correct size (is set to 32MByte) */ ++ mmc_blk_dev.blksz = MMCSD_SECTOR_SIZE; ++ mmc_blk_dev.lba = 0x10000; ++ mmc_blk_dev.removable = 0; ++ mmc_blk_dev.block_read = mmc_bread; ++ ++ fat_register_device(&mmc_blk_dev, 1); ++ return 0; ++} ++ ++int mmc_read(ulong src, uchar * dst, int size) ++{ ++ /* not implemented */ ++ return (0); ++} ++ ++int mmc_write(uchar * src, ulong dst, int size) ++{ ++ /* not implementd */ ++ return (0); ++} ++ ++int mmc2info(ulong addr) ++{ ++ /*not implemented */ ++ return (0); ++} +diff --git a/cpu/omap3/mmc_host_def.h b/cpu/omap3/mmc_host_def.h +new file mode 100644 +index 0000000..3a84f16 +--- /dev/null ++++ b/cpu/omap3/mmc_host_def.h +@@ -0,0 +1,164 @@ ++/* ++ * (C) Copyright 2008 ++ * Texas Instruments, ++ * Syed Mohammed Khasim ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation's version 2 of ++ * the License. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef MMC_HOST_DEFINITIONS_H ++#define MMC_HOST_DEFINITIONS_H ++ ++/* ++ * OMAP HSMMC register definitions ++ */ ++#define OMAP_HSMMC_SYSCONFIG (*(unsigned int *) 0x4809C010) ++#define OMAP_HSMMC_SYSSTATUS (*(unsigned int *) 0x4809C014) ++#define OMAP_HSMMC_CON (*(unsigned int *) 0x4809C02C) ++#define OMAP_HSMMC_BLK (*(unsigned int *) 0x4809C104) ++#define OMAP_HSMMC_ARG (*(unsigned int *) 0x4809C108) ++#define OMAP_HSMMC_CMD (*(unsigned int *) 0x4809C10C) ++#define OMAP_HSMMC_RSP10 (*(unsigned int *) 0x4809C110) ++#define OMAP_HSMMC_RSP32 (*(unsigned int *) 0x4809C114) ++#define OMAP_HSMMC_RSP54 (*(unsigned int *) 0x4809C118) ++#define OMAP_HSMMC_RSP76 (*(unsigned int *) 0x4809C11C) ++#define OMAP_HSMMC_DATA (*(unsigned int *) 0x4809C120) ++#define OMAP_HSMMC_PSTATE (*(unsigned int *) 0x4809C124) ++#define OMAP_HSMMC_HCTL (*(unsigned int *) 0x4809C128) ++#define OMAP_HSMMC_SYSCTL (*(unsigned int *) 0x4809C12C) ++#define OMAP_HSMMC_STAT (*(unsigned int *) 0x4809C130) ++#define OMAP_HSMMC_IE (*(unsigned int *) 0x4809C134) ++#define OMAP_HSMMC_CAPA (*(unsigned int *) 0x4809C140) ++ ++/* T2 Register definitions */ ++#define CONTROL_DEV_CONF0 (*(unsigned int *) 0x48002274) ++#define CONTROL_PBIAS_LITE (*(unsigned int *) 0x48002520) ++ ++/* ++ * OMAP HS MMC Bit definitions ++ */ ++#define MMC_SOFTRESET (0x1 << 1) ++#define RESETDONE (0x1 << 0) ++#define NOOPENDRAIN (0x0 << 0) ++#define OPENDRAIN (0x1 << 0) ++#define OD (0x1 << 0) ++#define INIT_NOINIT (0x0 << 1) ++#define INIT_INITSTREAM (0x1 << 1) ++#define HR_NOHOSTRESP (0x0 << 2) ++#define STR_BLOCK (0x0 << 3) ++#define MODE_FUNC (0x0 << 4) ++#define DW8_1_4BITMODE (0x0 << 5) ++#define MIT_CTO (0x0 << 6) ++#define CDP_ACTIVEHIGH (0x0 << 7) ++#define WPP_ACTIVEHIGH (0x0 << 8) ++#define RESERVED_MASK (0x3 << 9) ++#define CTPL_MMC_SD (0x0 << 11) ++#define BLEN_512BYTESLEN (0x200 << 0) ++#define NBLK_STPCNT (0x0 << 16) ++#define DE_DISABLE (0x0 << 0) ++#define BCE_DISABLE (0x0 << 1) ++#define ACEN_DISABLE (0x0 << 2) ++#define DDIR_OFFSET (4) ++#define DDIR_MASK (0x1 << 4) ++#define DDIR_WRITE (0x0 << 4) ++#define DDIR_READ (0x1 << 4) ++#define MSBS_SGLEBLK (0x0 << 5) ++#define RSP_TYPE_OFFSET (16) ++#define RSP_TYPE_MASK (0x3 << 16) ++#define RSP_TYPE_NORSP (0x0 << 16) ++#define RSP_TYPE_LGHT136 (0x1 << 16) ++#define RSP_TYPE_LGHT48 (0x2 << 16) ++#define RSP_TYPE_LGHT48B (0x3 << 16) ++#define CCCE_NOCHECK (0x0 << 19) ++#define CCCE_CHECK (0x1 << 19) ++#define CICE_NOCHECK (0x0 << 20) ++#define CICE_CHECK (0x1 << 20) ++#define DP_OFFSET (21) ++#define DP_MASK (0x1 << 21) ++#define DP_NO_DATA (0x0 << 21) ++#define DP_DATA (0x1 << 21) ++#define CMD_TYPE_NORMAL (0x0 << 22) ++#define INDEX_OFFSET (24) ++#define INDEX_MASK (0x3f << 24) ++#define INDEX(i) (i << 24) ++#define DATI_MASK (0x1 << 1) ++#define DATI_CMDDIS (0x1 << 1) ++#define DTW_1_BITMODE (0x0 << 1) ++#define DTW_4_BITMODE (0x1 << 1) ++#define SDBP_PWROFF (0x0 << 8) ++#define SDBP_PWRON (0x1 << 8) ++#define SDVS_1V8 (0x5 << 9) ++#define SDVS_3V0 (0x6 << 9) ++#define ICE_MASK (0x1 << 0) ++#define ICE_STOP (0x0 << 0) ++#define ICS_MASK (0x1 << 1) ++#define ICS_NOTREADY (0x0 << 1) ++#define ICE_OSCILLATE (0x1 << 0) ++#define CEN_MASK (0x1 << 2) ++#define CEN_DISABLE (0x0 << 2) ++#define CEN_ENABLE (0x1 << 2) ++#define CLKD_OFFSET (6) ++#define CLKD_MASK (0x3FF << 6) ++#define DTO_MASK (0xF << 16) ++#define DTO_15THDTO (0xE << 16) ++#define SOFTRESETALL (0x1 << 24) ++#define CC_MASK (0x1 << 0) ++#define TC_MASK (0x1 << 1) ++#define BWR_MASK (0x1 << 4) ++#define BRR_MASK (0x1 << 5) ++#define ERRI_MASK (0x1 << 15) ++#define IE_CC (0x01 << 0) ++#define IE_TC (0x01 << 1) ++#define IE_BWR (0x01 << 4) ++#define IE_BRR (0x01 << 5) ++#define IE_CTO (0x01 << 16) ++#define IE_CCRC (0x01 << 17) ++#define IE_CEB (0x01 << 18) ++#define IE_CIE (0x01 << 19) ++#define IE_DTO (0x01 << 20) ++#define IE_DCRC (0x01 << 21) ++#define IE_DEB (0x01 << 22) ++#define IE_CERR (0x01 << 28) ++#define IE_BADA (0x01 << 29) ++ ++#define VS30_3V0SUP (1 << 25) ++#define VS18_1V8SUP (1 << 26) ++ ++/* Driver definitions */ ++#define MMCSD_SECTOR_SIZE (512) ++#define MMC_CARD 0 ++#define SD_CARD 1 ++#define BYTE_MODE 0 ++#define SECTOR_MODE 1 ++#define CLK_INITSEQ 0 ++#define CLK_400KHZ 1 ++#define CLK_MISC 2 ++ ++typedef struct { ++ unsigned int card_type; ++ unsigned int version; ++ unsigned int mode; ++ unsigned int size; ++ unsigned int RCA; ++} mmc_card_data; ++ ++#define mmc_reg_out(addr, mask, val) (addr) = ( ((addr)) & (~(mask)) ) | ( (val) & (mask) ); ++#define mmc_reg_out(addr, mask, val) (addr) = ( ((addr)) & (~(mask)) ) | ( (val) & (mask) ); ++ ++#endif /* MMC_HOST_DEFINITIONS_H */ +diff --git a/cpu/omap3/mmc_protocol.h b/cpu/omap3/mmc_protocol.h +new file mode 100644 +index 0000000..a8d9662 +--- /dev/null ++++ b/cpu/omap3/mmc_protocol.h +@@ -0,0 +1,253 @@ ++/* ++ * (C) Copyright 2008 ++ * Texas Instruments, ++ * Syed Mohammed Khasim ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation's version 2 of ++ * the License. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef MMC_PROTOCOL_H ++#define MMC_PROTOCOL_H ++ ++#include "mmc_host_def.h" ++ ++/* Responses */ ++#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) ++#define RSP_TYPE_R1 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) ++#define RSP_TYPE_R1B (RSP_TYPE_LGHT48B | CCCE_CHECK | CICE_CHECK) ++#define RSP_TYPE_R2 (RSP_TYPE_LGHT136 | CCCE_CHECK | CICE_NOCHECK) ++#define RSP_TYPE_R3 (RSP_TYPE_LGHT48 | CCCE_NOCHECK | CICE_NOCHECK) ++#define RSP_TYPE_R4 (RSP_TYPE_LGHT48 | CCCE_NOCHECK | CICE_NOCHECK) ++#define RSP_TYPE_R5 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) ++#define RSP_TYPE_R6 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) ++#define RSP_TYPE_R7 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK) ++ ++/* All supported commands */ ++#define MMC_CMD0 ( INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD1 ( INDEX(1) | RSP_TYPE_R3 | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD2 ( INDEX(2) | RSP_TYPE_R2 | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD3 ( INDEX(3) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) ++#define MMC_SDCMD3 ( INDEX(3) | RSP_TYPE_R6 | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD4 ( INDEX(4) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD6 ( INDEX(6) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD7_SELECT ( INDEX(7) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD7_DESELECT ( INDEX(7) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD8 ( INDEX(8) | RSP_TYPE_R1 | DP_DATA | DDIR_READ) ++#define MMC_SDCMD8 ( INDEX(8) | RSP_TYPE_R7 | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD9 ( INDEX(9) | RSP_TYPE_R2 | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD12 ( INDEX(12) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD13 ( INDEX(13) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD15 ( INDEX(15) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD16 ( INDEX(16) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) ++#define MMC_CMD17 ( INDEX(17) | RSP_TYPE_R1 | DP_DATA | DDIR_READ) ++#define MMC_CMD24 ( INDEX(24) | RSP_TYPE_R1 | DP_DATA | DDIR_WRITE) ++#define MMC_ACMD6 ( INDEX(6) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) ++#define MMC_ACMD41 ( INDEX(41) | RSP_TYPE_R3 | DP_NO_DATA | DDIR_WRITE) ++#define MMC_ACMD51 ( INDEX(51) | RSP_TYPE_R1 | DP_DATA | DDIR_READ) ++#define MMC_CMD55 ( INDEX(55) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE) ++ ++#define MMC_AC_CMD_RCA_MASK (unsigned int)(0xFFFF << 16) ++#define MMC_BC_CMD_DSR_MASK (unsigned int)(0xFFFF << 16) ++#define MMC_DSR_DEFAULT (0x0404) ++#define SD_CMD8_CHECK_PATTERN (0xAA) ++#define SD_CMD8_2_7_3_6_V_RANGE (0x01 << 8) ++ ++/* Clock Configurations and Macros */ ++ ++#define MMC_CLOCK_REFERENCE (96) ++#define MMC_RELATIVE_CARD_ADDRESS (0x1234) ++#define MMC_INIT_SEQ_CLK (MMC_CLOCK_REFERENCE * 1000 / 80) ++#define MMC_400kHz_CLK (MMC_CLOCK_REFERENCE * 1000 / 400) ++#define CLKDR(r,f,u) ( ( ((r)*100) / ((f)*(u)) ) + 1 ) ++#define CLKD(f,u) (CLKDR(MMC_CLOCK_REFERENCE,f,u)) ++ ++#define MMC_OCR_REG_ACCESS_MODE_MASK (0x3 << 29) ++#define MMC_OCR_REG_ACCESS_MODE_BYTE (0x0 << 29) ++#define MMC_OCR_REG_ACCESS_MODE_SECTOR (0x2 << 29) ++ ++#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK (0x1 << 30) ++#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_BYTE (0x0 << 30) ++#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR (0x1 << 30) ++ ++#define MMC_SD2_CSD_C_SIZE_LSB_MASK (0xFFFF) ++#define MMC_SD2_CSD_C_SIZE_MSB_MASK (0x003F) ++#define MMC_SD2_CSD_C_SIZE_MSB_OFFSET (16) ++#define MMC_CSD_C_SIZE_LSB_MASK (0x0003) ++#define MMC_CSD_C_SIZE_MSB_MASK (0x03FF) ++#define MMC_CSD_C_SIZE_MSB_OFFSET (2) ++ ++#define MMC_CSD_TRAN_SPEED_UNIT_MASK (0x07 << 0) ++#define MMC_CSD_TRAN_SPEED_FACTOR_MASK (0x0F << 3) ++#define MMC_CSD_TRAN_SPEED_UNIT_100MHZ (0x3 << 0) ++#define MMC_CSD_TRAN_SPEED_FACTOR_1_0 (0x01 << 3) ++#define MMC_CSD_TRAN_SPEED_FACTOR_8_0 (0x0F << 3) ++ ++const unsigned short mmc_transspeed_val[15][4] = { ++ {CLKD(10, 1), CLKD(10, 10), CLKD(10, 100), CLKD(10, 1000)}, ++ {CLKD(12, 1), CLKD(12, 10), CLKD(12, 100), CLKD(12, 1000)}, ++ {CLKD(13, 1), CLKD(13, 10), CLKD(13, 100), CLKD(13, 1000)}, ++ {CLKD(15, 1), CLKD(15, 10), CLKD(15, 100), CLKD(15, 1000)}, ++ {CLKD(20, 1), CLKD(20, 10), CLKD(20, 100), CLKD(20, 1000)}, ++ {CLKD(26, 1), CLKD(26, 10), CLKD(26, 100), CLKD(26, 1000)}, ++ {CLKD(30, 1), CLKD(30, 10), CLKD(30, 100), CLKD(30, 1000)}, ++ {CLKD(35, 1), CLKD(35, 10), CLKD(35, 100), CLKD(35, 1000)}, ++ {CLKD(40, 1), CLKD(40, 10), CLKD(40, 100), CLKD(40, 1000)}, ++ {CLKD(45, 1), CLKD(45, 10), CLKD(45, 100), CLKD(45, 1000)}, ++ {CLKD(52, 1), CLKD(52, 10), CLKD(52, 100), CLKD(52, 1000)}, ++ {CLKD(55, 1), CLKD(55, 10), CLKD(55, 100), CLKD(55, 1000)}, ++ {CLKD(60, 1), CLKD(60, 10), CLKD(60, 100), CLKD(60, 1000)}, ++ {CLKD(70, 1), CLKD(70, 10), CLKD(70, 100), CLKD(70, 1000)}, ++ {CLKD(80, 1), CLKD(80, 10), CLKD(80, 100), CLKD(80, 1000)} ++}; ++ ++typedef struct { ++ unsigned not_used:1; ++ unsigned crc:7; ++ unsigned ecc:2; ++ unsigned file_format:2; ++ unsigned tmp_write_protect:1; ++ unsigned perm_write_protect:1; ++ unsigned copy:1; ++ unsigned file_format_grp:1; ++ unsigned content_prot_app:1; ++ unsigned reserved_1:4; ++ unsigned write_bl_partial:1; ++ unsigned write_bl_len:4; ++ unsigned r2w_factor:3; ++ unsigned default_ecc:2; ++ unsigned wp_grp_enable:1; ++ unsigned wp_grp_size:5; ++ unsigned erase_grp_mult:5; ++ unsigned erase_grp_size:5; ++ unsigned c_size_mult:3; ++ unsigned vdd_w_curr_max:3; ++ unsigned vdd_w_curr_min:3; ++ unsigned vdd_r_curr_max:3; ++ unsigned vdd_r_curr_min:3; ++ unsigned c_size_lsb:2; ++ unsigned c_size_msb:10; ++ unsigned reserved_2:2; ++ unsigned dsr_imp:1; ++ unsigned read_blk_misalign:1; ++ unsigned write_blk_misalign:1; ++ unsigned read_bl_partial:1; ++ unsigned read_bl_len:4; ++ unsigned ccc:12; ++ unsigned tran_speed:8; ++ unsigned nsac:8; ++ unsigned taac:8; ++ unsigned reserved_3:2; ++ unsigned spec_vers:4; ++ unsigned csd_structure:2; ++} mmc_csd_reg_t; ++ ++/* csd for sd2.0 */ ++typedef struct { ++ unsigned not_used:1; ++ unsigned crc:7; ++ unsigned reserved_1:2; ++ unsigned file_format:2; ++ unsigned tmp_write_protect:1; ++ unsigned perm_write_protect:1; ++ unsigned copy:1; ++ unsigned file_format_grp:1; ++ unsigned reserved_2:5; ++ unsigned write_bl_partial:1; ++ unsigned write_bl_len:4; ++ unsigned r2w_factor:3; ++ unsigned reserved_3:2; ++ unsigned wp_grp_enable:1; ++ unsigned wp_grp_size:7; ++ unsigned sector_size:7; ++ unsigned erase_blk_len:1; ++ unsigned reserved_4:1; ++ unsigned c_size_lsb:16; ++ unsigned c_size_msb:6; ++ unsigned reserved_5:6; ++ unsigned dsr_imp:1; ++ unsigned read_blk_misalign:1; ++ unsigned write_blk_misalign:1; ++ unsigned read_bl_partial:1; ++ unsigned read_bl_len:4; ++ unsigned ccc:12; ++ unsigned tran_speed:8; ++ unsigned nsac:8; ++ unsigned taac:8; ++ unsigned reserved_6:6; ++ unsigned csd_structure:2; ++} mmc_sd2_csd_reg_t; ++ ++/* extended csd - 512 bytes long */ ++typedef struct { ++ unsigned char reserved_1[181]; ++ unsigned char erasedmemorycontent; ++ unsigned char reserved_2; ++ unsigned char buswidthmode; ++ unsigned char reserved_3; ++ unsigned char highspeedinterfacetiming; ++ unsigned char reserved_4; ++ unsigned char powerclass; ++ unsigned char reserved_5; ++ unsigned char commandsetrevision; ++ unsigned char reserved_6; ++ unsigned char commandset; ++ unsigned char extendedcsdrevision; ++ unsigned char reserved_7; ++ unsigned char csdstructureversion; ++ unsigned char reserved_8; ++ unsigned char cardtype; ++ unsigned char reserved_9[3]; ++ unsigned char powerclass_52mhz_1_95v; ++ unsigned char powerclass_26mhz_1_95v; ++ unsigned char powerclass_52mhz_3_6v; ++ unsigned char powerclass_26mhz_3_6v; ++ unsigned char reserved_10; ++ unsigned char minreadperf_4b_26mhz; ++ unsigned char minwriteperf_4b_26mhz; ++ unsigned char minreadperf_8b_26mhz_4b_52mhz; ++ unsigned char minwriteperf_8b_26mhz_4b_52mhz; ++ unsigned char minreadperf_8b_52mhz; ++ unsigned char minwriteperf_8b_52mhz; ++ unsigned char reserved_11; ++ unsigned int sectorcount; ++ unsigned char reserved_12[288]; ++ unsigned char supportedcommandsets; ++ unsigned char reserved_13[7]; ++} mmc_extended_csd_reg_t; ++ ++/* mmc sd responce */ ++typedef struct { ++ unsigned int ocr; ++} mmc_resp_r3; ++ ++typedef struct { ++ unsigned short cardstatus; ++ unsigned short newpublishedrca; ++} mmc_resp_r6; ++ ++extern mmc_card_data mmc_dev; ++ ++unsigned char mmc_lowlevel_init(void); ++unsigned char mmc_send_command(unsigned int cmd, unsigned int arg, ++ unsigned int *response); ++unsigned char mmc_setup_clock(unsigned int iclk, unsigned short clkd); ++unsigned char mmc_set_opendrain(unsigned char state); ++unsigned char mmc_read_data(unsigned int *output_buf); ++ ++#endif /*MMC_PROTOCOL_H */ +diff --git a/cpu/omap3/start.S b/cpu/omap3/start.S +new file mode 100644 +index 0000000..065b3c7 +--- /dev/null ++++ b/cpu/omap3/start.S +@@ -0,0 +1,484 @@ ++/* ++ * armboot - Startup Code for OMAP3430/ARM Cortex CPU-core ++ * ++ * Copyright (c) 2004 Texas Instruments ++ * ++ * Copyright (c) 2001 Marius Gröger ++ * Copyright (c) 2002 Alex Züpke ++ * Copyright (c) 2002 Gary Jennejohn ++ * Copyright (c) 2003 Richard Woodruff ++ * Copyright (c) 2003 Kshitij ++ * Copyright (c) 2006 Syed Mohammed Khasim ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR) ++#include ++#endif ++.globl _start ++_start: b reset ++ ldr pc, _undefined_instruction ++ ldr pc, _software_interrupt ++ ldr pc, _prefetch_abort ++ ldr pc, _data_abort ++ ldr pc, _not_used ++ ldr pc, _irq ++ ldr pc, _fiq ++ ++_undefined_instruction: .word undefined_instruction ++_software_interrupt: .word software_interrupt ++_prefetch_abort: .word prefetch_abort ++_data_abort: .word data_abort ++_not_used: .word not_used ++_irq: .word irq ++_fiq: .word fiq ++_pad: .word 0x12345678 /* now 16*4=64 */ ++.global _end_vect ++_end_vect: ++ ++ .balignl 16,0xdeadbeef ++/* ++ ************************************************************************* ++ * ++ * Startup Code (reset vector) ++ * ++ * do important init only if we don't start from memory! ++ * setup Memory and board specific bits prior to relocation. ++ * relocate armboot to ram ++ * setup stack ++ * ++ ************************************************************************* ++ */ ++ ++_TEXT_BASE: ++ .word TEXT_BASE ++ ++.globl _armboot_start ++_armboot_start: ++ .word _start ++ ++/* ++ * These are defined in the board-specific linker script. ++ */ ++.globl _bss_start ++_bss_start: ++ .word __bss_start ++ ++.globl _bss_end ++_bss_end: ++ .word _end ++ ++#ifdef CONFIG_USE_IRQ ++/* IRQ stack memory (calculated at run-time) */ ++.globl IRQ_STACK_START ++IRQ_STACK_START: ++ .word 0x0badc0de ++ ++/* IRQ stack memory (calculated at run-time) */ ++.globl FIQ_STACK_START ++FIQ_STACK_START: ++ .word 0x0badc0de ++#endif ++ ++/* ++ * the actual reset code ++ */ ++ ++reset: ++ /* ++ * set the cpu to SVC32 mode ++ */ ++ mrs r0,cpsr ++ bic r0,r0,#0x1f ++ orr r0,r0,#0xd3 ++ msr cpsr,r0 ++ ++#if (CONFIG_OMAP34XX) ++ /* Copy vectors to mask ROM indirect addr */ ++ adr r0, _start /* r0 <- current position of code */ ++ add r0, r0, #4 /* skip reset vector */ ++ mov r2, #64 /* r2 <- size to copy */ ++ add r2, r0, r2 /* r2 <- source end address */ ++ mov r1, #SRAM_OFFSET0 /* build vect addr */ ++ mov r3, #SRAM_OFFSET1 ++ add r1, r1, r3 ++ mov r3, #SRAM_OFFSET2 ++ add r1, r1, r3 ++next: ++ ldmia r0!, {r3-r10} /* copy from source address [r0] */ ++ stmia r1!, {r3-r10} /* copy to target address [r1] */ ++ cmp r0, r2 /* until source end address [r2] */ ++ bne next /* loop until equal */ ++#if !defined(CFG_NAND_BOOT) && !defined(CFG_ONENAND_BOOT) ++ /* No need to copy/exec the clock code - DPLL adjust already done ++ * in NAND/oneNAND Boot. ++ */ ++ bl cpy_clk_code /* put dpll adjust code behind vectors */ ++#endif /* NAND Boot */ ++#endif /* 24xx */ ++ /* the mask ROM code should have PLL and others stable */ ++#ifndef CONFIG_SKIP_LOWLEVEL_INIT ++ bl cpu_init_crit ++#endif ++ ++#ifndef CONFIG_SKIP_RELOCATE_UBOOT ++relocate: /* relocate U-Boot to RAM */ ++ adr r0, _start /* r0 <- current position of code */ ++ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ ++ cmp r0, r1 /* don't reloc during debug */ ++ beq stack_setup ++ ++ ldr r2, _armboot_start ++ ldr r3, _bss_start ++ sub r2, r3, r2 /* r2 <- size of armboot */ ++ add r2, r0, r2 /* r2 <- source end address */ ++ ++copy_loop: /* copy 32 bytes at a time */ ++ ldmia r0!, {r3-r10} /* copy from source address [r0] */ ++ stmia r1!, {r3-r10} /* copy to target address [r1] */ ++ cmp r0, r2 /* until source end addreee [r2] */ ++ ble copy_loop ++#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ ++ ++ /* Set up the stack */ ++stack_setup: ++ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ ++ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ ++ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ ++#ifdef CONFIG_USE_IRQ ++ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) ++#endif ++ sub sp, r0, #12 /* leave 3 words for abort-stack */ ++ and sp, sp, #~7 /* 8 byte alinged for (ldr/str)d */ ++ ++ /* Clear BSS (if any). Is below tx (watch load addr - need space) */ ++clear_bss: ++ ldr r0, _bss_start /* find start of bss segment */ ++ ldr r1, _bss_end /* stop here */ ++ mov r2, #0x00000000 /* clear value */ ++clbss_l: ++ str r2, [r0] /* clear BSS location */ ++ cmp r0, r1 /* are we at the end yet */ ++ add r0, r0, #4 /* increment clear index pointer */ ++ bne clbss_l /* keep clearing till at end */ ++ ++ ldr pc, _start_armboot /* jump to C code */ ++ ++_start_armboot: .word start_armboot ++ ++ ++/* ++ ************************************************************************* ++ * ++ * CPU_init_critical registers ++ * ++ * setup important registers ++ * setup memory timing ++ * ++ ************************************************************************* ++ */ ++cpu_init_crit: ++ /* ++ * Invalidate L1 I/D ++ */ ++ mov r0, #0 /* set up for MCR */ ++ mcr p15, 0, r0, c8, c7, 0 /* invalidate TLBs */ ++ mcr p15, 0, r0, c7, c5, 0 /* invalidate icache */ ++ ++ /* ++ * disable MMU stuff and caches ++ */ ++ mrc p15, 0, r0, c1, c0, 0 ++ bic r0, r0, #0x00002000 @ clear bits 13 (--V-) ++ bic r0, r0, #0x00000007 @ clear bits 2:0 (-CAM) ++ orr r0, r0, #0x00000002 @ set bit 1 (--A-) Align ++ orr r0, r0, #0x00000800 @ set bit 12 (Z---) BTB ++ mcr p15, 0, r0, c1, c0, 0 ++ ++ /* ++ * Jump to board specific initialization... The Mask ROM will have already initialized ++ * basic memory. Go here to bump up clock rate and handle wake up conditions. ++ */ ++ mov ip, lr /* persevere link reg across call */ ++ bl lowlevel_init /* go setup pll,mux,memory */ ++ mov lr, ip /* restore link */ ++ mov pc, lr /* back to my caller */ ++/* ++ ************************************************************************* ++ * ++ * Interrupt handling ++ * ++ ************************************************************************* ++ */ ++@ ++@ IRQ stack frame. ++@ ++#define S_FRAME_SIZE 72 ++ ++#define S_OLD_R0 68 ++#define S_PSR 64 ++#define S_PC 60 ++#define S_LR 56 ++#define S_SP 52 ++ ++#define S_IP 48 ++#define S_FP 44 ++#define S_R10 40 ++#define S_R9 36 ++#define S_R8 32 ++#define S_R7 28 ++#define S_R6 24 ++#define S_R5 20 ++#define S_R4 16 ++#define S_R3 12 ++#define S_R2 8 ++#define S_R1 4 ++#define S_R0 0 ++ ++#define MODE_SVC 0x13 ++#define I_BIT 0x80 ++ ++/* ++ * use bad_save_user_regs for abort/prefetch/undef/swi ... ++ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling ++ */ ++ ++ .macro bad_save_user_regs ++ sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack ++ stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 ++ ++ ldr r2, _armboot_start ++ sub r2, r2, #(CFG_MALLOC_LEN) ++ sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack ++ ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) ++ add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack ++ ++ add r5, sp, #S_SP ++ mov r1, lr ++ stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr ++ mov r0, sp @ save current stack into r0 (param register) ++ .endm ++ ++ .macro irq_save_user_regs ++ sub sp, sp, #S_FRAME_SIZE ++ stmia sp, {r0 - r12} @ Calling r0-r12 ++ add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. ++ stmdb r8, {sp, lr}^ @ Calling SP, LR ++ str lr, [r8, #0] @ Save calling PC ++ mrs r6, spsr ++ str r6, [r8, #4] @ Save CPSR ++ str r0, [r8, #8] @ Save OLD_R0 ++ mov r0, sp ++ .endm ++ ++ .macro irq_restore_user_regs ++ ldmia sp, {r0 - lr}^ @ Calling r0 - lr ++ mov r0, r0 ++ ldr lr, [sp, #S_PC] @ Get PC ++ add sp, sp, #S_FRAME_SIZE ++ subs pc, lr, #4 @ return & move spsr_svc into cpsr ++ .endm ++ ++ .macro get_bad_stack ++ ldr r13, _armboot_start @ setup our mode stack (enter in banked mode) ++ sub r13, r13, #(CFG_MALLOC_LEN) @ move past malloc pool ++ sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack ++ ++ str lr, [r13] @ save caller lr in position 0 of saved stack ++ mrs lr, spsr @ get the spsr ++ str lr, [r13, #4] @ save spsr in position 1 of saved stack ++ ++ mov r13, #MODE_SVC @ prepare SVC-Mode ++ @ msr spsr_c, r13 ++ msr spsr, r13 @ switch modes, make sure moves will execute ++ mov lr, pc @ capture return pc ++ movs pc, lr @ jump to next instruction & switch modes. ++ .endm ++ ++ .macro get_bad_stack_swi ++ sub r13, r13, #4 @ space on current stack for scratch reg. ++ str r0, [r13] @ save R0's value. ++ ldr r0, _armboot_start @ get data regions start ++ sub r0, r0, #(CFG_MALLOC_LEN) @ move past malloc pool ++ sub r0, r0, #(CFG_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack ++ str lr, [r0] @ save caller lr in position 0 of saved stack ++ mrs r0, spsr @ get the spsr ++ str lr, [r0, #4] @ save spsr in position 1 of saved stack ++ ldr r0, [r13] @ restore r0 ++ add r13, r13, #4 @ pop stack entry ++ .endm ++ ++ .macro get_irq_stack @ setup IRQ stack ++ ldr sp, IRQ_STACK_START ++ .endm ++ ++ .macro get_fiq_stack @ setup FIQ stack ++ ldr sp, FIQ_STACK_START ++ .endm ++ ++/* ++ * exception handlers ++ */ ++ .align 5 ++undefined_instruction: ++ get_bad_stack ++ bad_save_user_regs ++ bl do_undefined_instruction ++ ++ .align 5 ++software_interrupt: ++ get_bad_stack_swi ++ bad_save_user_regs ++ bl do_software_interrupt ++ ++ .align 5 ++prefetch_abort: ++ get_bad_stack ++ bad_save_user_regs ++ bl do_prefetch_abort ++ ++ .align 5 ++data_abort: ++ get_bad_stack ++ bad_save_user_regs ++ bl do_data_abort ++ ++ .align 5 ++not_used: ++ get_bad_stack ++ bad_save_user_regs ++ bl do_not_used ++ ++#ifdef CONFIG_USE_IRQ ++ ++ .align 5 ++irq: ++ get_irq_stack ++ irq_save_user_regs ++ bl do_irq ++ irq_restore_user_regs ++ ++ .align 5 ++fiq: ++ get_fiq_stack ++ /* someone ought to write a more effiction fiq_save_user_regs */ ++ irq_save_user_regs ++ bl do_fiq ++ irq_restore_user_regs ++ ++#else ++ ++ .align 5 ++irq: ++ get_bad_stack ++ bad_save_user_regs ++ bl do_irq ++ ++ .align 5 ++fiq: ++ get_bad_stack ++ bad_save_user_regs ++ bl do_fiq ++ ++#endif ++ .align 5 ++.global arm_cache_flush ++arm_cache_flush: ++ mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache ++ mov pc, lr @ back to caller ++ ++/* ++ * v7_flush_dcache_all() ++ * ++ * Flush the whole D-cache. ++ * ++ * Corrupted registers: r0-r5, r7, r9-r11 ++ * ++ * - mm - mm_struct describing address space ++ */ ++ .align 5 ++.global v7_flush_dcache_all ++v7_flush_dcache_all: ++ stmfd r13!, {r0-r5, r7, r9-r12,r14} ++ ++ mov r7, r0 @ take a backup of device type ++ cmp r0, #0x3 @ check if the device type is GP ++ moveq r12, #0x1 @ set up to invalide L2 ++smi: .word 0x01600070 @ Call SMI monitor (smieq) ++ cmp r7, #0x3 @ compare again in case its lost ++ beq finished_inval @ if GP device, inval done above ++ ++ mrc p15, 1, r0, c0, c0, 1 @ read clidr ++ ands r3, r0, #0x7000000 @ extract loc from clidr ++ mov r3, r3, lsr #23 @ left align loc bit field ++ beq finished_inval @ if loc is 0, then no need to clean ++ mov r10, #0 @ start clean at cache level 0 ++inval_loop1: ++ add r2, r10, r10, lsr #1 @ work out 3x current cache level ++ mov r1, r0, lsr r2 @ extract cache type bits from clidr ++ and r1, r1, #7 @ mask of the bits for current cache only ++ cmp r1, #2 @ see what cache we have at this level ++ blt skip_inval @ skip if no cache, or just i-cache ++ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr ++ isb @ isb to sych the new cssr&csidr ++ mrc p15, 1, r1, c0, c0, 0 @ read the new csidr ++ and r2, r1, #7 @ extract the length of the cache lines ++ add r2, r2, #4 @ add 4 (line length offset) ++ ldr r4, =0x3ff ++ ands r4, r4, r1, lsr #3 @ find maximum number on the way size ++ clz r5, r4 @ find bit position of way size increment ++ ldr r7, =0x7fff ++ ands r7, r7, r1, lsr #13 @ extract max number of the index size ++inval_loop2: ++ mov r9, r4 @ create working copy of max way size ++inval_loop3: ++ orr r11, r10, r9, lsl r5 @ factor way and cache number into r11 ++ orr r11, r11, r7, lsl r2 @ factor index number into r11 ++ mcr p15, 0, r11, c7, c6, 2 @ invalidate by set/way ++ subs r9, r9, #1 @ decrement the way ++ bge inval_loop3 ++ subs r7, r7, #1 @ decrement the index ++ bge inval_loop2 ++skip_inval: ++ add r10, r10, #2 @ increment cache number ++ cmp r3, r10 ++ bgt inval_loop1 ++finished_inval: ++ mov r10, #0 @ swith back to cache level 0 ++ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr ++ isb ++ ++ ldmfd r13!, {r0-r5, r7, r9-r12,pc} ++ ++ ++ .align 5 ++.global reset_cpu ++reset_cpu: ++ ldr r1, rstctl /* get addr for global reset reg */ ++ mov r3, #0x2 /* full reset pll+mpu */ ++ str r3, [r1] /* force reset */ ++ mov r0, r0 ++_loop_forever: ++ b _loop_forever ++rstctl: ++ .word PRM_RSTCTRL ++ +diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c +index 7dab786..7782e9d 100644 +--- a/drivers/i2c/omap24xx_i2c.c ++++ b/drivers/i2c/omap24xx_i2c.c +@@ -22,11 +22,13 @@ + + #include + +-#ifdef CONFIG_DRIVER_OMAP24XX_I2C ++#if defined(CONFIG_DRIVER_OMAP24XX_I2C) || defined(CONFIG_DRIVER_OMAP34XX_I2C) + + #include + #include + ++#define inb(a) __raw_readb(a) ++#define outb(a,v) __raw_writeb(a,v) + #define inw(a) __raw_readw(a) + #define outw(a,v) __raw_writew(a,v) + +@@ -114,7 +116,11 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) + + status = wait_for_pin (); + if (status & I2C_STAT_RRDY) { +- *value = inw (I2C_DATA); ++#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) ++ *value = inb(I2C_DATA); ++#else ++ *value = inw(I2C_DATA); ++#endif + udelay (20000); + } else { + i2c_error = 1; +@@ -155,8 +161,23 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) + status = wait_for_pin (); + + if (status & I2C_STAT_XRDY) { +- /* send out two bytes */ +- outw ((value << 8) + regoffset, I2C_DATA); ++#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) ++ /* send out 1 byte */ ++ outb(regoffset, I2C_DATA); ++ outw(I2C_STAT_XRDY, I2C_STAT); ++ status = wait_for_pin(); ++ if ((status & I2C_STAT_XRDY)) { ++ /* send out next 1 byte */ ++ outb(value, I2C_DATA); ++ outw(I2C_STAT_XRDY, I2C_STAT); ++ } else { ++ i2c_error = 1; ++ } ++#else ++ /* send out two bytes */ ++ outw ((value << 8) + regoffset, I2C_DATA); ++#endif ++ + /* must have enough delay to allow BB bit to go low */ + udelay (50000); + if (inw (I2C_STAT) & I2C_STAT_NACK) { +@@ -193,7 +214,11 @@ static void flush_fifo(void) + while(1){ + stat = inw(I2C_STAT); + if(stat == I2C_STAT_RRDY){ +- inw(I2C_DATA); ++#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) ++ inb(I2C_DATA); ++#else ++ inw(I2C_DATA); ++#endif + outw(I2C_STAT_RRDY,I2C_STAT); + udelay(1000); + }else +diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c +index 7e27ee1..e552e08 100644 +--- a/fs/jffs2/jffs2_1pass.c ++++ b/fs/jffs2/jffs2_1pass.c +@@ -303,7 +303,9 @@ static inline void *get_node_mem_nor(u32 off) + */ + static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf) + { ++#if (defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)) || defined(ONFIG_CMD_FLASH) + struct mtdids *id = current_part->dev->id; ++#endif + + #if defined(CONFIG_CMD_FLASH) + if (id->type == MTD_DEV_TYPE_NOR) +@@ -321,7 +323,9 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf) + + static inline void *get_node_mem(u32 off) + { +- struct mtdids *id = current_part->dev->id; ++#if (defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)) || defined(ONFIG_CMD_FLASH) ++ struct mtdids *id = current_part->dev->id; ++#endif + + #if defined(CONFIG_CMD_FLASH) + if (id->type == MTD_DEV_TYPE_NOR) +diff --git a/include/asm-arm/arch-omap3/bits.h b/include/asm-arm/arch-omap3/bits.h +new file mode 100644 +index 0000000..8522335 +--- /dev/null ++++ b/include/asm-arm/arch-omap3/bits.h +@@ -0,0 +1,48 @@ ++/* bits.h ++ * Copyright (c) 2004 Texas Instruments ++ * ++ * This package is free software; you can redistribute it and/or ++ * modify it under the terms of the license found in the file ++ * named COPYING that should have accompanied this file. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++#ifndef __bits_h ++#define __bits_h 1 ++ ++#define BIT0 (1<<0) ++#define BIT1 (1<<1) ++#define BIT2 (1<<2) ++#define BIT3 (1<<3) ++#define BIT4 (1<<4) ++#define BIT5 (1<<5) ++#define BIT6 (1<<6) ++#define BIT7 (1<<7) ++#define BIT8 (1<<8) ++#define BIT9 (1<<9) ++#define BIT10 (1<<10) ++#define BIT11 (1<<11) ++#define BIT12 (1<<12) ++#define BIT13 (1<<13) ++#define BIT14 (1<<14) ++#define BIT15 (1<<15) ++#define BIT16 (1<<16) ++#define BIT17 (1<<17) ++#define BIT18 (1<<18) ++#define BIT19 (1<<19) ++#define BIT20 (1<<20) ++#define BIT21 (1<<21) ++#define BIT22 (1<<22) ++#define BIT23 (1<<23) ++#define BIT24 (1<<24) ++#define BIT25 (1<<25) ++#define BIT26 (1<<26) ++#define BIT27 (1<<27) ++#define BIT28 (1<<28) ++#define BIT29 (1<<29) ++#define BIT30 (1<<30) ++#define BIT31 (1<<31) ++ ++#endif +diff --git a/include/asm-arm/arch-omap3/clocks.h b/include/asm-arm/arch-omap3/clocks.h +new file mode 100644 +index 0000000..7cdd58c +--- /dev/null ++++ b/include/asm-arm/arch-omap3/clocks.h +@@ -0,0 +1,62 @@ ++/* ++ * (C) Copyright 2006-2008 ++ * Texas Instruments, ++ * Richard Woodruff ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++#ifndef _CLOCKS_H_ ++#define _CLOCKS_H_ ++ ++#define LDELAY 12000000 ++ ++#define S12M 12000000 ++#define S13M 13000000 ++#define S19_2M 19200000 ++#define S24M 24000000 ++#define S26M 26000000 ++#define S38_4M 38400000 ++ ++#define FCK_IVA2_ON 0x00000001 ++#define FCK_CORE1_ON 0x03fffe29 ++#define ICK_CORE1_ON 0x3ffffffb ++#define ICK_CORE2_ON 0x0000001f ++#define FCK_WKUP_ON 0x000000e9 ++#define ICK_WKUP_ON 0x0000003f ++#define FCK_DSS_ON 0x00000005 ++#define ICK_DSS_ON 0x00000001 ++#define FCK_CAM_ON 0x00000001 ++#define ICK_CAM_ON 0x00000001 ++#define FCK_PER_ON 0x0003ffff ++#define ICK_PER_ON 0x0003ffff ++ ++/* Used to index into DPLL parameter tables */ ++typedef struct { ++ unsigned int m; ++ unsigned int n; ++ unsigned int fsel; ++ unsigned int m2; ++} dpll_param; ++ ++/* Following functions are exported from lowlevel_init.S */ ++extern dpll_param *get_mpu_dpll_param(void); ++extern dpll_param *get_iva_dpll_param(void); ++extern dpll_param *get_core_dpll_param(void); ++extern dpll_param *get_per_dpll_param(void); ++ ++extern void *_end_vect, *_start; ++ ++#endif +diff --git a/include/asm-arm/arch-omap3/clocks_omap3.h b/include/asm-arm/arch-omap3/clocks_omap3.h +new file mode 100644 +index 0000000..9bb4700 +--- /dev/null ++++ b/include/asm-arm/arch-omap3/clocks_omap3.h +@@ -0,0 +1,101 @@ ++/* ++ * (C) Copyright 2006-2008 ++ * Texas Instruments, ++ * Richard Woodruff ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++#ifndef _CLOCKS_OMAP3_H_ ++#define _CLOCKS_OMAP3_H_ ++ ++#define PLL_STOP 1 /* PER & IVA */ ++#define PLL_LOW_POWER_BYPASS 5 /* MPU, IVA & CORE */ ++#define PLL_FAST_RELOCK_BYPASS 6 /* CORE */ ++#define PLL_LOCK 7 /* MPU, IVA, CORE & PER */ ++ ++/* The following configurations are OPP and SysClk value independant ++ * and hence are defined here. All the other DPLL related values are ++ * tabulated in lowlevel_init.S. ++ */ ++ ++/* CORE DPLL */ ++# define CORE_M3X2 2 /* 332MHz : CM_CLKSEL1_EMU */ ++# define CORE_SSI_DIV 3 /* 221MHz : CM_CLKSEL_CORE */ ++# define CORE_FUSB_DIV 2 /* 41.5MHz: */ ++# define CORE_L4_DIV 2 /* 83MHz : L4 */ ++# define CORE_L3_DIV 2 /* 166MHz : L3 {DDR} */ ++# define GFX_DIV 2 /* 83MHz : CM_CLKSEL_GFX */ ++# define WKUP_RSM 2 /* 41.5MHz: CM_CLKSEL_WKUP */ ++ ++/* PER DPLL */ ++# define PER_M6X2 3 /* 288MHz: CM_CLKSEL1_EMU */ ++# define PER_M5X2 4 /* 216MHz: CM_CLKSEL_CAM */ ++# define PER_M4X2 9 /* 96MHz : CM_CLKSEL_DSS-dss1 */ ++# define PER_M3X2 16 /* 54MHz : CM_CLKSEL_DSS-tv */ ++ ++# define CLSEL1_EMU_VAL ((CORE_M3X2 << 16) | (PER_M6X2 << 24) | (0x0a50)) ++ ++# define M_12 0xA6 ++# define N_12 0x05 ++# define FSEL_12 0x07 ++# define M2_12 0x01 /* M3 of 2 */ ++ ++# define M_12_ES1 0x19F ++# define N_12_ES1 0x0E ++# define FSL_12_ES1 0x03 ++# define M2_12_ES1 0x1 /* M3 of 2 */ ++ ++# define M_13 0x14C ++# define N_13 0x0C ++# define FSEL_13 0x03 ++# define M2_13 0x01 /* M3 of 2 */ ++ ++# define M_13_ES1 0x1B2 ++# define N_13_ES1 0x10 ++# define FSL_13_ES1 0x03 ++# define M2_13_ES1 0x01 /* M3 of 2 */ ++ ++# define M_19p2 0x19F ++# define N_19p2 0x17 ++# define FSEL_19p2 0x03 ++# define M2_19p2 0x01 /* M3 of 2 */ ++ ++# define M_19p2_ES1 0x19F ++# define N_19p2_ES1 0x17 ++# define FSL_19p2_ES1 0x03 ++# define M2_19p2_ES1 0x01 /* M3 of 2 */ ++ ++# define M_26 0xA6 ++# define N_26 0x0C ++# define FSEL_26 0x07 ++# define M2_26 0x01 /* M3 of 2 */ ++ ++# define M_26_ES1 0x1B2 ++# define N_26_ES1 0x21 ++# define FSL_26_ES1 0x03 ++# define M2_26_ES1 0x01 /* M3 of 2 */ ++ ++# define M_38p4 0x19F ++# define N_38p4 0x2F ++# define FSEL_38p4 0x03 ++# define M2_38p4 0x01 /* M3 of 2 */ ++ ++# define M_38p4_ES1 0x19F ++# define N_38p4_ES1 0x2F ++# define FSL_38p4_ES1 0x03 ++# define M2_38p4_ES1 0x01 /* M3 of 2 */ ++ ++#endif /* endif _CLOCKS_OMAP3_H_ */ +diff --git a/include/asm-arm/arch-omap3/cpu.h b/include/asm-arm/arch-omap3/cpu.h +new file mode 100644 +index 0000000..5bb9faa +--- /dev/null ++++ b/include/asm-arm/arch-omap3/cpu.h +@@ -0,0 +1,245 @@ ++/* ++ * (C) Copyright 2006 ++ * Texas Instruments, ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++ ++#ifndef _OMAP34XX_CPU_H ++#define _OMAP34XX_CPU_H ++#include ++ ++/* Register offsets of common modules */ ++/* Control */ ++#define CONTROL_STATUS (OMAP34XX_CTRL_BASE + 0x2F0) ++#define OMAP34XX_MCR (OMAP34XX_CTRL_BASE + 0x8C) ++#define CONTROL_SCALABLE_OMAP_STATUS (OMAP34XX_CTRL_BASE + 0x44C) ++#define CONTROL_SCALABLE_OMAP_OCP (OMAP34XX_CTRL_BASE + 0x534) ++ ++/* Tap Information */ ++#define TAP_IDCODE_REG (OMAP34XX_TAP_BASE+0x204) ++#define PRODUCTION_ID (OMAP34XX_TAP_BASE+0x208) ++ ++/* device type */ ++#define DEVICE_MASK (BIT8|BIT9|BIT10) ++#define TST_DEVICE 0x0 ++#define EMU_DEVICE 0x1 ++#define HS_DEVICE 0x2 ++#define GP_DEVICE 0x3 ++ ++/* GPMC CS3/cs4/cs6 not avaliable */ ++#define GPMC_BASE (OMAP34XX_GPMC_BASE) ++#define GPMC_SYSCONFIG (OMAP34XX_GPMC_BASE+0x10) ++#define GPMC_IRQSTATUS (OMAP34XX_GPMC_BASE+0x18) ++#define GPMC_IRQENABLE (OMAP34XX_GPMC_BASE+0x1C) ++#define GPMC_TIMEOUT_CONTROL (OMAP34XX_GPMC_BASE+0x40) ++#define GPMC_CONFIG (OMAP34XX_GPMC_BASE+0x50) ++#define GPMC_STATUS (OMAP34XX_GPMC_BASE+0x54) ++ ++#define GPMC_CONFIG_CS0 (OMAP34XX_GPMC_BASE+0x60) ++#define GPMC_CONFIG_WIDTH (0x30) ++ ++#define GPMC_CONFIG1 (0x00) ++#define GPMC_CONFIG2 (0x04) ++#define GPMC_CONFIG3 (0x08) ++#define GPMC_CONFIG4 (0x0C) ++#define GPMC_CONFIG5 (0x10) ++#define GPMC_CONFIG6 (0x14) ++#define GPMC_CONFIG7 (0x18) ++#define GPMC_NAND_CMD (0x1C) ++#define GPMC_NAND_ADR (0x20) ++#define GPMC_NAND_DAT (0x24) ++ ++#define GPMC_ECC_CONFIG (0x1F4) ++#define GPMC_ECC_CONTROL (0x1F8) ++#define GPMC_ECC_SIZE_CONFIG (0x1FC) ++#define GPMC_ECC1_RESULT (0x200) ++#define GPMC_ECC2_RESULT (0x204) ++#define GPMC_ECC3_RESULT (0x208) ++#define GPMC_ECC4_RESULT (0x20C) ++#define GPMC_ECC5_RESULT (0x210) ++#define GPMC_ECC6_RESULT (0x214) ++#define GPMC_ECC7_RESULT (0x218) ++#define GPMC_ECC8_RESULT (0x21C) ++#define GPMC_ECC9_RESULT (0x220) ++ ++/* GPMC Mapping */ ++# define FLASH_BASE 0x10000000 /* NOR flash (aligned to 256 Meg) */ ++# define FLASH_BASE_SDPV1 0x04000000 /* NOR flash (aligned to 64 Meg) */ ++# define FLASH_BASE_SDPV2 0x10000000 /* NOR flash (aligned to 256 Meg) */ ++# define DEBUG_BASE 0x08000000 /* debug board */ ++# define NAND_BASE 0x30000000 /* NAND addr (actual size small port) */ ++# define PISMO2_BASE 0x18000000 /* PISMO2 CS1/2 */ ++# define ONENAND_MAP 0x20000000 /* OneNand addr (actual size small port */ ++ ++/* SMS */ ++#define SMS_SYSCONFIG (OMAP34XX_SMS_BASE+0x10) ++#define SMS_RG_ATT0 (OMAP34XX_SMS_BASE+0x48) ++#define SMS_CLASS_ARB0 (OMAP34XX_SMS_BASE+0xD0) ++#define BURSTCOMPLETE_GROUP7 BIT31 ++ ++/* SDRC */ ++#define SDRC_SYSCONFIG (OMAP34XX_SDRC_BASE+0x10) ++#define SDRC_STATUS (OMAP34XX_SDRC_BASE+0x14) ++#define SDRC_CS_CFG (OMAP34XX_SDRC_BASE+0x40) ++#define SDRC_SHARING (OMAP34XX_SDRC_BASE+0x44) ++#define SDRC_DLLA_CTRL (OMAP34XX_SDRC_BASE+0x60) ++#define SDRC_DLLA_STATUS (OMAP34XX_SDRC_BASE+0x64) ++#define SDRC_DLLB_CTRL (OMAP34XX_SDRC_BASE+0x68) ++#define SDRC_DLLB_STATUS (OMAP34XX_SDRC_BASE+0x6C) ++#define DLLPHASE BIT1 ++#define LOADDLL BIT2 ++#define DLL_DELAY_MASK 0xFF00 ++#define DLL_NO_FILTER_MASK (BIT8|BIT9) ++ ++#define SDRC_POWER (OMAP34XX_SDRC_BASE+0x70) ++#define WAKEUPPROC BIT26 ++ ++#define SDRC_MCFG_0 (OMAP34XX_SDRC_BASE+0x80) ++#define SDRC_MR_0 (OMAP34XX_SDRC_BASE+0x84) ++#define SDRC_ACTIM_CTRLA_0 (OMAP34XX_SDRC_BASE+0x9C) ++#define SDRC_ACTIM_CTRLB_0 (OMAP34XX_SDRC_BASE+0xA0) ++#define SDRC_ACTIM_CTRLA_1 (OMAP34XX_SDRC_BASE+0xC4) ++#define SDRC_ACTIM_CTRLB_1 (OMAP34XX_SDRC_BASE+0xC8) ++#define SDRC_RFR_CTRL (OMAP34XX_SDRC_BASE+0xA4) ++#define SDRC_RFR_CTRL (OMAP34XX_SDRC_BASE+0xA4) ++#define SDRC_MANUAL_0 (OMAP34XX_SDRC_BASE+0xA8) ++#define OMAP34XX_SDRC_CS0 0x80000000 ++#define OMAP34XX_SDRC_CS1 0xA0000000 ++#define CMD_NOP 0x0 ++#define CMD_PRECHARGE 0x1 ++#define CMD_AUTOREFRESH 0x2 ++#define CMD_ENTR_PWRDOWN 0x3 ++#define CMD_EXIT_PWRDOWN 0x4 ++#define CMD_ENTR_SRFRSH 0x5 ++#define CMD_CKE_HIGH 0x6 ++#define CMD_CKE_LOW 0x7 ++#define SOFTRESET BIT1 ++#define SMART_IDLE (0x2 << 3) ++#define REF_ON_IDLE (0x1 << 6) ++ ++/* timer regs offsets (32 bit regs) */ ++#define TIDR 0x0 /* r */ ++#define TIOCP_CFG 0x10 /* rw */ ++#define TISTAT 0x14 /* r */ ++#define TISR 0x18 /* rw */ ++#define TIER 0x1C /* rw */ ++#define TWER 0x20 /* rw */ ++#define TCLR 0x24 /* rw */ ++#define TCRR 0x28 /* rw */ ++#define TLDR 0x2C /* rw */ ++#define TTGR 0x30 /* rw */ ++#define TWPS 0x34 /* r */ ++#define TMAR 0x38 /* rw */ ++#define TCAR1 0x3c /* r */ ++#define TSICR 0x40 /* rw */ ++#define TCAR2 0x44 /* r */ ++#define GPT_EN ((0<<2)|BIT1|BIT0) /* enable sys_clk NO-prescale /1 */ ++ ++/* Watchdog */ ++#define WWPS 0x34 /* r */ ++#define WSPR 0x48 /* rw */ ++#define WD_UNLOCK1 0xAAAA ++#define WD_UNLOCK2 0x5555 ++ ++/* PRCM */ ++#define CM_FCLKEN_IVA2 0x48004000 ++#define CM_CLKEN_PLL_IVA2 0x48004004 ++#define CM_IDLEST_PLL_IVA2 0x48004024 ++#define CM_CLKSEL1_PLL_IVA2 0x48004040 ++#define CM_CLKSEL2_PLL_IVA2 0x48004044 ++#define CM_CLKEN_PLL_MPU 0x48004904 ++#define CM_IDLEST_PLL_MPU 0x48004924 ++#define CM_CLKSEL1_PLL_MPU 0x48004940 ++#define CM_CLKSEL2_PLL_MPU 0x48004944 ++#define CM_FCLKEN1_CORE 0x48004a00 ++#define CM_ICLKEN1_CORE 0x48004a10 ++#define CM_ICLKEN2_CORE 0x48004a14 ++#define CM_CLKSEL_CORE 0x48004a40 ++#define CM_FCLKEN_GFX 0x48004b00 ++#define CM_ICLKEN_GFX 0x48004b10 ++#define CM_CLKSEL_GFX 0x48004b40 ++#define CM_FCLKEN_WKUP 0x48004c00 ++#define CM_ICLKEN_WKUP 0x48004c10 ++#define CM_CLKSEL_WKUP 0x48004c40 ++#define CM_IDLEST_WKUP 0x48004c20 ++#define CM_CLKEN_PLL 0x48004d00 ++#define CM_IDLEST_CKGEN 0x48004d20 ++#define CM_CLKSEL1_PLL 0x48004d40 ++#define CM_CLKSEL2_PLL 0x48004d44 ++#define CM_CLKSEL3_PLL 0x48004d48 ++#define CM_FCLKEN_DSS 0x48004e00 ++#define CM_ICLKEN_DSS 0x48004e10 ++#define CM_CLKSEL_DSS 0x48004e40 ++#define CM_FCLKEN_CAM 0x48004f00 ++#define CM_ICLKEN_CAM 0x48004f10 ++#define CM_CLKSEL_CAM 0x48004F40 ++#define CM_FCLKEN_PER 0x48005000 ++#define CM_ICLKEN_PER 0x48005010 ++#define CM_CLKSEL_PER 0x48005040 ++#define CM_CLKSEL1_EMU 0x48005140 ++ ++#define PRM_CLKSEL 0x48306d40 ++#define PRM_RSTCTRL 0x48307250 ++#define PRM_CLKSRC_CTRL 0x48307270 ++ ++/* SMX-APE */ ++#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000) ++#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400) ++#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800) ++#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00) ++#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000) ++ ++#define RT_REQ_INFO_PERMISSION_1 (PM_RT_APE_BASE_ADDR_ARM + 0x68) ++#define RT_READ_PERMISSION_0 (PM_RT_APE_BASE_ADDR_ARM + 0x50) ++#define RT_WRITE_PERMISSION_0 (PM_RT_APE_BASE_ADDR_ARM + 0x58) ++#define RT_ADDR_MATCH_1 (PM_RT_APE_BASE_ADDR_ARM + 0x60) ++ ++#define GPMC_REQ_INFO_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x48) ++#define GPMC_READ_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x50) ++#define GPMC_WRITE_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x58) ++ ++#define OCM_REQ_INFO_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x48) ++#define OCM_READ_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x50) ++#define OCM_WRITE_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x58) ++#define OCM_ADDR_MATCH_2 (PM_OCM_RAM_BASE_ADDR_ARM + 0x80) ++ ++#define IVA2_REQ_INFO_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x48) ++#define IVA2_READ_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x50) ++#define IVA2_WRITE_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x58) ++ ++#define IVA2_REQ_INFO_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x68) ++#define IVA2_READ_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x70) ++#define IVA2_WRITE_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x78) ++ ++#define IVA2_REQ_INFO_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x88) ++#define IVA2_READ_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x90) ++#define IVA2_WRITE_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x98) ++ ++#define IVA2_REQ_INFO_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xA8) ++#define IVA2_READ_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xB0) ++#define IVA2_WRITE_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xB8) ++ ++/* I2C base */ ++#define I2C_BASE1 (OMAP34XX_CORE_L4_IO_BASE + 0x70000) ++#define I2C_BASE2 (OMAP34XX_CORE_L4_IO_BASE + 0x72000) ++#define I2C_BASE3 (OMAP34XX_CORE_L4_IO_BASE + 0x60000) ++ ++#endif +diff --git a/include/asm-arm/arch-omap3/i2c.h b/include/asm-arm/arch-omap3/i2c.h +new file mode 100644 +index 0000000..1b8524e +--- /dev/null ++++ b/include/asm-arm/arch-omap3/i2c.h +@@ -0,0 +1,130 @@ ++/* ++ * (C) Copyright 2004-2006 ++ * Texas Instruments, ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++#ifndef _OMAP34XX_I2C_H_ ++#define _OMAP34XX_I2C_H_ ++ ++/* Get the i2c base addresses */ ++#include ++ ++#define I2C_DEFAULT_BASE I2C_BASE1 ++ ++#define I2C_REV (I2C_DEFAULT_BASE + 0x00) ++#define I2C_IE (I2C_DEFAULT_BASE + 0x04) ++#define I2C_STAT (I2C_DEFAULT_BASE + 0x08) ++#define I2C_IV (I2C_DEFAULT_BASE + 0x0c) ++#define I2C_BUF (I2C_DEFAULT_BASE + 0x14) ++#define I2C_CNT (I2C_DEFAULT_BASE + 0x18) ++#define I2C_DATA (I2C_DEFAULT_BASE + 0x1c) ++#define I2C_SYSC (I2C_DEFAULT_BASE + 0x20) ++#define I2C_CON (I2C_DEFAULT_BASE + 0x24) ++#define I2C_OA (I2C_DEFAULT_BASE + 0x28) ++#define I2C_SA (I2C_DEFAULT_BASE + 0x2c) ++#define I2C_PSC (I2C_DEFAULT_BASE + 0x30) ++#define I2C_SCLL (I2C_DEFAULT_BASE + 0x34) ++#define I2C_SCLH (I2C_DEFAULT_BASE + 0x38) ++#define I2C_SYSTEST (I2C_DEFAULT_BASE + 0x3c) ++ ++/* I2C masks */ ++ ++/* I2C Interrupt Enable Register (I2C_IE): */ ++#define I2C_IE_GC_IE (1 << 5) ++#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ ++#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ ++#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ ++#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ ++#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ ++ ++/* I2C Status Register (I2C_STAT): */ ++ ++#define I2C_STAT_SBD (1 << 15) /* Single byte data */ ++#define I2C_STAT_BB (1 << 12) /* Bus busy */ ++#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ ++#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ ++#define I2C_STAT_AAS (1 << 9) /* Address as slave */ ++#define I2C_STAT_GC (1 << 5) ++#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ ++#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ ++#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ ++#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ ++#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ ++ ++/* I2C Interrupt Code Register (I2C_INTCODE): */ ++ ++#define I2C_INTCODE_MASK 7 ++#define I2C_INTCODE_NONE 0 ++#define I2C_INTCODE_AL 1 /* Arbitration lost */ ++#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ ++#define I2C_INTCODE_ARDY 3 /* Register access ready */ ++#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ ++#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ ++ ++/* I2C Buffer Configuration Register (I2C_BUF): */ ++ ++#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ ++#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ ++ ++/* I2C Configuration Register (I2C_CON): */ ++ ++#define I2C_CON_EN (1 << 15) /* I2C module enable */ ++#define I2C_CON_BE (1 << 14) /* Big endian mode */ ++#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ ++#define I2C_CON_MST (1 << 10) /* Master/slave mode */ ++#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */ ++#define I2C_CON_XA (1 << 8) /* Expand address */ ++#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ ++#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ ++ ++/* I2C System Test Register (I2C_SYSTEST): */ ++ ++#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ ++#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode (on breakpoint) */ ++#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ ++#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ ++#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ ++#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ ++#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ ++#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ ++ ++#define I2C_SCLL_SCLL (0) ++#define I2C_SCLL_SCLL_M (0xFF) ++#define I2C_SCLL_HSSCLL (8) ++#define I2C_SCLH_HSSCLL_M (0xFF) ++#define I2C_SCLH_SCLH (0) ++#define I2C_SCLH_SCLH_M (0xFF) ++#define I2C_SCLH_HSSCLH (8) ++#define I2C_SCLH_HSSCLH_M (0xFF) ++ ++#define OMAP_I2C_STANDARD 100 ++#define OMAP_I2C_FAST_MODE 400 ++#define OMAP_I2C_HIGH_SPEED 3400 ++ ++#define SYSTEM_CLOCK_12 12000 ++#define SYSTEM_CLOCK_13 13000 ++#define SYSTEM_CLOCK_192 19200 ++#define SYSTEM_CLOCK_96 96000 ++ ++#define I2C_IP_CLK SYSTEM_CLOCK_96 ++#define I2C_PSC_MAX (0x0f) ++#define I2C_PSC_MIN (0x00) ++ ++#endif +diff --git a/include/asm-arm/arch-omap3/mem.h b/include/asm-arm/arch-omap3/mem.h +new file mode 100644 +index 0000000..1af53a8 +--- /dev/null ++++ b/include/asm-arm/arch-omap3/mem.h +@@ -0,0 +1,220 @@ ++/* ++ * (C) Copyright 2006-2008 ++ * Texas Instruments, ++ * Richard Woodruff ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef _MEM_H_ ++#define _MEM_H_ ++ ++#define SDRC_CS0_OSET 0x0 ++#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */ ++ ++#ifndef __ASSEMBLY__ ++ ++typedef enum { ++ STACKED = 0, ++ IP_DDR = 1, ++ COMBO_DDR = 2, ++ IP_SDR = 3, ++} mem_t; ++ ++#endif /* __ASSEMBLY__ */ ++ ++#define EARLY_INIT 1 ++ ++/* Slower full frequency range default timings for x32 operation*/ ++#define SDP_SDRC_SHARING 0x00000100 ++#define SDP_SDRC_MR_0_SDR 0x00000031 ++ ++/* optimized timings good for current shipping parts */ ++#define SDP_3430_SDRC_RFR_CTRL_165MHz 0x0004e201 /* 7.8us/6ns - 50=0x4e2 */ ++ ++#define DLL_OFFSET 0 ++#define DLL_WRITEDDRCLKX2DIS 1 ++#define DLL_ENADLL 1 ++#define DLL_LOCKDLL 0 ++#define DLL_DLLPHASE_72 0 ++#define DLL_DLLPHASE_90 1 ++ ++// rkw - need to find of 90/72 degree recommendation for speed like before. ++#define SDP_SDRC_DLLAB_CTRL ((DLL_ENADLL << 3) | \ ++ (DLL_LOCKDLL << 2) | (DLL_DLLPHASE_90 << 1)) ++ ++/* Infineon part of 3430SDP (165MHz optimized) 6.06ns ++ * ACTIMA ++ * TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6 ++ * TDPL (Twr) = 15/6 = 2.5 -> 3 ++ * TRRD = 12/6 = 2 ++ * TRCD = 18/6 = 3 ++ * TRP = 18/6 = 3 ++ * TRAS = 42/6 = 7 ++ * TRC = 60/6 = 10 ++ * TRFC = 72/6 = 12 ++ * ACTIMB ++ * TCKE = 2 ++ * XSR = 120/6 = 20 ++ */ ++#define TDAL_165 6 ++#define TDPL_165 3 ++#define TRRD_165 2 ++#define TRCD_165 3 ++#define TRP_165 3 ++#define TRAS_165 7 ++#define TRC_165 10 ++#define TRFC_165 12 ++#define V_ACTIMA_165 ((TRFC_165 << 27) | (TRC_165 << 22) | (TRAS_165 << 18) \ ++ | (TRP_165 << 15) | (TRCD_165 << 12) |(TRRD_165 << 9) | \ ++ (TDPL_165 << 6) | (TDAL_165)) ++ ++#define TWTR_165 1 ++#define TCKE_165 2 ++#define TXP_165 2 ++#define XSR_165 20 ++#define V_ACTIMB_165 ((TCKE_165 << 12) | (XSR_165 << 0)) | \ ++ (TXP_165 << 8) | (TWTR_165 << 16) ++ ++# define SDP_SDRC_ACTIM_CTRLA_0 V_ACTIMA_165 ++# define SDP_SDRC_ACTIM_CTRLB_0 V_ACTIMB_165 ++# define SDP_SDRC_RFR_CTRL SDP_3430_SDRC_RFR_CTRL_165MHz ++ ++/* ++ * GPMC settings - ++ * Definitions is as per the following format ++ * # define _GPMC_CONFIG ++ * Where: ++ * PART is the part name e.g. STNOR - Intel Strata Flash ++ * x is GPMC config registers from 1 to 6 (there will be 6 macros) ++ * Value is corresponding value ++ * ++ * For every valid PRCM configuration there should be only one definition of ++ * the same. if values are independent of the board, this definition will be ++ * present in this file if values are dependent on the board, then this should ++ * go into corresponding mem-boardName.h file ++ * ++ * Currently valid part Names are (PART): ++ * STNOR - Intel Strata Flash ++ * SMNAND - Samsung NAND ++ * MPDB - H4 MPDB board ++ * SBNOR - Sibley NOR ++ * MNAND - Micron Large page x16 NAND ++ * ONNAND - Samsung One NAND ++ * ++ * include/configs/file.h contains the defn - for all CS we are interested ++ * #define OMAP34XX_GPMC_CSx PART ++ * #define OMAP34XX_GPMC_CSx_SIZE Size ++ * #define OMAP34XX_GPMC_CSx_MAP Map ++ * Where: ++ * x - CS number ++ * PART - Part Name as defined above ++ * SIZE - how big is the mapping to be ++ * GPMC_SIZE_128M - 0x8 ++ * GPMC_SIZE_64M - 0xC ++ * GPMC_SIZE_32M - 0xE ++ * GPMC_SIZE_16M - 0xF ++ * MAP - Map this CS to which address(GPMC address space)- Absolute address ++ * >>24 before being used. ++ */ ++#define GPMC_SIZE_128M 0x8 ++#define GPMC_SIZE_64M 0xC ++#define GPMC_SIZE_32M 0xE ++#define GPMC_SIZE_16M 0xF ++ ++# define SMNAND_GPMC_CONFIG1 0x00000800 ++# define SMNAND_GPMC_CONFIG2 0x00141400 ++# define SMNAND_GPMC_CONFIG3 0x00141400 ++# define SMNAND_GPMC_CONFIG4 0x0F010F01 ++# define SMNAND_GPMC_CONFIG5 0x010C1414 ++# define SMNAND_GPMC_CONFIG6 0x1F0F0A80 ++# define SMNAND_GPMC_CONFIG7 0x00000C44 ++ ++# define M_NAND_GPMC_CONFIG1 0x00001800 ++# define M_NAND_GPMC_CONFIG2 0x00141400 ++# define M_NAND_GPMC_CONFIG3 0x00141400 ++# define M_NAND_GPMC_CONFIG4 0x0F010F01 ++# define M_NAND_GPMC_CONFIG5 0x010C1414 ++# define M_NAND_GPMC_CONFIG6 0x1f0f0A80 ++# define M_NAND_GPMC_CONFIG7 0x00000C44 ++ ++# define STNOR_GPMC_CONFIG1 0x3 ++# define STNOR_GPMC_CONFIG2 0x00151501 ++# define STNOR_GPMC_CONFIG3 0x00060602 ++# define STNOR_GPMC_CONFIG4 0x11091109 ++# define STNOR_GPMC_CONFIG5 0x01141F1F ++# define STNOR_GPMC_CONFIG6 0x000004c4 ++ ++# define SIBNOR_GPMC_CONFIG1 0x1200 ++# define SIBNOR_GPMC_CONFIG2 0x001f1f00 ++# define SIBNOR_GPMC_CONFIG3 0x00080802 ++# define SIBNOR_GPMC_CONFIG4 0x1C091C09 ++# define SIBNOR_GPMC_CONFIG5 0x01131F1F ++# define SIBNOR_GPMC_CONFIG6 0x1F0F03C2 ++ ++# define SDPV2_MPDB_GPMC_CONFIG1 0x00611200 ++# define SDPV2_MPDB_GPMC_CONFIG2 0x001F1F01 ++# define SDPV2_MPDB_GPMC_CONFIG3 0x00080803 ++# define SDPV2_MPDB_GPMC_CONFIG4 0x1D091D09 ++# define SDPV2_MPDB_GPMC_CONFIG5 0x041D1F1F ++# define SDPV2_MPDB_GPMC_CONFIG6 0x1D0904C4 ++ ++# define MPDB_GPMC_CONFIG1 0x00011000 ++# define MPDB_GPMC_CONFIG2 0x001f1f01 ++# define MPDB_GPMC_CONFIG3 0x00080803 ++# define MPDB_GPMC_CONFIG4 0x1c0b1c0a ++# define MPDB_GPMC_CONFIG5 0x041f1F1F ++# define MPDB_GPMC_CONFIG6 0x1F0F04C4 ++ ++# define P2_GPMC_CONFIG1 0x0 ++# define P2_GPMC_CONFIG2 0x0 ++# define P2_GPMC_CONFIG3 0x0 ++# define P2_GPMC_CONFIG4 0x0 ++# define P2_GPMC_CONFIG5 0x0 ++# define P2_GPMC_CONFIG6 0x0 ++ ++# define ONENAND_GPMC_CONFIG1 0x00001200 ++# define ONENAND_GPMC_CONFIG2 0x000F0F01 ++# define ONENAND_GPMC_CONFIG3 0x00030301 ++# define ONENAND_GPMC_CONFIG4 0x0F040F04 ++# define ONENAND_GPMC_CONFIG5 0x010F1010 ++# define ONENAND_GPMC_CONFIG6 0x1F060000 ++ ++/* max number of GPMC Chip Selects */ ++#define GPMC_MAX_CS 8 ++/* max number of GPMC regs */ ++#define GPMC_MAX_REG 7 ++ ++#define PISMO1_NOR 1 ++#define PISMO1_NAND 2 ++#define PISMO2_CS0 3 ++#define PISMO2_CS1 4 ++#define PISMO1_ONENAND 5 ++#define DBG_MPDB 6 ++#define PISMO2_NAND_CS0 7 ++#define PISMO2_NAND_CS1 8 ++ ++/* make it readable for the gpmc_init */ ++#define PISMO1_NOR_BASE FLASH_BASE ++#define PISMO1_NAND_BASE NAND_BASE ++#define PISMO2_CS0_BASE PISMO2_MAP1 ++#define PISMO1_ONEN_BASE ONENAND_MAP ++#define DBG_MPDB_BASE DEBUG_BASE ++ ++#endif /* endif _MEM_H_ */ +diff --git a/include/asm-arm/arch-omap3/mmc.h b/include/asm-arm/arch-omap3/mmc.h +new file mode 100644 +index 0000000..f265d8a +--- /dev/null ++++ b/include/asm-arm/arch-omap3/mmc.h +@@ -0,0 +1,175 @@ ++/* ++ * linux/drivers/mmc/mmc_pxa.h ++ * ++ * Author: Vladimir Shebordaev, Igor Oblakov ++ * Copyright: MontaVista Software Inc. ++ * ++ * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#ifndef __MMC_PXA_P_H__ ++#define __MMC_PXA_P_H__ ++ ++/* PXA-250 MMC controller registers */ ++ ++/* MMC_STRPCL */ ++#define MMC_STRPCL_STOP_CLK (0x0001UL) ++#define MMC_STRPCL_START_CLK (0x0002UL) ++ ++/* MMC_STAT */ ++ ++#define MMC_STAT_ERRORS (MMC_STAT_RES_CRC_ERROR|MMC_STAT_SPI_READ_ERROR_TOKEN\ ++ |MMC_STAT_CRC_READ_ERROR|MMC_STAT_TIME_OUT_RESPONSE\ ++ |MMC_STAT_READ_TIME_OUT|MMC_STAT_CRC_WRITE_ERROR) ++ ++/* MMC_CLKRT */ ++#define MMC_CLKRT_20MHZ (0x0000UL) ++#define MMC_CLKRT_10MHZ (0x0001UL) ++#define MMC_CLKRT_5MHZ (0x0002UL) ++#define MMC_CLKRT_2_5MHZ (0x0003UL) ++#define MMC_CLKRT_1_25MHZ (0x0004UL) ++#define MMC_CLKRT_0_625MHZ (0x0005UL) ++#define MMC_CLKRT_0_3125MHZ (0x0006UL) ++ ++/* MMC_SPI */ ++#define MMC_SPI_DISABLE (0x00UL) ++#define MMC_SPI_EN (0x01UL) ++#define MMC_SPI_CS_EN (0x01UL << 2) ++#define MMC_SPI_CS_ADDRESS (0x01UL << 3) ++#define MMC_SPI_CRC_ON (0x01UL << 1) ++ ++/* MMC_CMDAT */ ++#define MMC_CMDAT_MMC_DMA_EN (0x0001UL << 7) ++#define MMC_CMDAT_INIT (0x0001UL << 6) ++#define MMC_CMDAT_BUSY (0x0001UL << 5) ++#define MMC_CMDAT_STREAM (0x0001UL << 4) ++#define MMC_CMDAT_BLOCK (0x0000UL << 4) ++#define MMC_CMDAT_WRITE (0x0001UL << 3) ++#define MMC_CMDAT_READ (0x0000UL << 3) ++#define MMC_CMDAT_DATA_EN (0x0001UL << 2) ++#define MMC_CMDAT_R1 (0x0001UL) ++#define MMC_CMDAT_R2 (0x0002UL) ++#define MMC_CMDAT_R3 (0x0003UL) ++ ++/* MMC_RESTO */ ++#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */ ++ ++/* MMC_RDTO */ ++#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */ ++ ++/* MMC_BLKLEN */ ++#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */ ++ ++/* MMC_PRTBUF */ ++#define MMC_PRTBUF_BUF_PART_FULL (0x01UL) ++#define MMC_PRTBUF_BUF_FULL (0x00UL ) ++ ++/* MMC_I_MASK */ ++#define MMC_I_MASK_TXFIFO_WR_REQ (0x01UL << 6) ++#define MMC_I_MASK_RXFIFO_RD_REQ (0x01UL << 5) ++#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4) ++#define MMC_I_MASK_STOP_CMD (0x01UL << 3) ++#define MMC_I_MASK_END_CMD_RES (0x01UL << 2) ++#define MMC_I_MASK_PRG_DONE (0x01UL << 1) ++#define MMC_I_MASK_DATA_TRAN_DONE (0x01UL) ++#define MMC_I_MASK_ALL (0x07fUL) ++ ++/* MMC_I_REG */ ++#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6) ++#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5) ++#define MMC_I_REG_CLK_IS_OFF (0x01UL << 4) ++#define MMC_I_REG_STOP_CMD (0x01UL << 3) ++#define MMC_I_REG_END_CMD_RES (0x01UL << 2) ++#define MMC_I_REG_PRG_DONE (0x01UL << 1) ++#define MMC_I_REG_DATA_TRAN_DONE (0x01UL) ++#define MMC_I_REG_ALL (0x007fUL) ++ ++/* MMC_CMD */ ++#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */ ++#define CMD(x) (x) ++ ++#define MMC_DEFAULT_RCA 1 ++ ++#define MMC_BLOCK_SIZE 512 ++#define MMC_CMD_RESET 0 ++#define MMC_CMD_SEND_OP_COND 1 ++#define MMC_CMD_ALL_SEND_CID 2 ++#define MMC_CMD_SET_RCA 3 ++#define MMC_CMD_SEND_CSD 9 ++#define MMC_CMD_SEND_CID 10 ++#define MMC_CMD_SEND_STATUS 13 ++#define MMC_CMD_SET_BLOCKLEN 16 ++#define MMC_CMD_READ_BLOCK 17 ++#define MMC_CMD_RD_BLK_MULTI 18 ++#define MMC_CMD_WRITE_BLOCK 24 ++ ++#define MMC_MAX_BLOCK_SIZE 512 ++ ++#define MMC_R1_IDLE_STATE 0x01 ++#define MMC_R1_ERASE_STATE 0x02 ++#define MMC_R1_ILLEGAL_CMD 0x04 ++#define MMC_R1_COM_CRC_ERR 0x08 ++#define MMC_R1_ERASE_SEQ_ERR 0x01 ++#define MMC_R1_ADDR_ERR 0x02 ++#define MMC_R1_PARAM_ERR 0x04 ++ ++#define MMC_R1B_WP_ERASE_SKIP 0x0002 ++#define MMC_R1B_ERR 0x0004 ++#define MMC_R1B_CC_ERR 0x0008 ++#define MMC_R1B_CARD_ECC_ERR 0x0010 ++#define MMC_R1B_WP_VIOLATION 0x0020 ++#define MMC_R1B_ERASE_PARAM 0x0040 ++#define MMC_R1B_OOR 0x0080 ++#define MMC_R1B_IDLE_STATE 0x0100 ++#define MMC_R1B_ERASE_RESET 0x0200 ++#define MMC_R1B_ILLEGAL_CMD 0x0400 ++#define MMC_R1B_COM_CRC_ERR 0x0800 ++#define MMC_R1B_ERASE_SEQ_ERR 0x1000 ++#define MMC_R1B_ADDR_ERR 0x2000 ++#define MMC_R1B_PARAM_ERR 0x4000 ++ ++typedef struct mmc_cid { ++/* FIXME: BYTE_ORDER */ ++ unsigned char year:4, month:4; ++ unsigned char sn[3]; ++ unsigned char fwrev:4, hwrev:4; ++ unsigned char name[6]; ++ unsigned char id[3]; ++} mmc_cid_t; ++ ++typedef struct mmc_csd { ++ unsigned char ecc:2, ++ file_format:2, ++ tmp_write_protect:1, ++ perm_write_protect:1, copy:1, file_format_grp:1; ++ unsigned long int content_prot_app:1, ++ rsvd3:4, ++ write_bl_partial:1, ++ write_bl_len:4, ++ r2w_factor:3, ++ default_ecc:2, ++ wp_grp_enable:1, ++ wp_grp_size:5, ++ erase_grp_mult:5, ++ erase_grp_size:5, ++ c_size_mult1:3, ++ vdd_w_curr_max:3, ++ vdd_w_curr_min:3, ++ vdd_r_curr_max:3, ++ vdd_r_curr_min:3, ++ c_size:12, ++ rsvd2:2, ++ dsr_imp:1, ++ read_blk_misalign:1, write_blk_misalign:1, read_bl_partial:1; ++ ++ unsigned short read_bl_len:4, ccc:12; ++ unsigned char tran_speed; ++ unsigned char nsac; ++ unsigned char taac; ++ unsigned char rsvd1:2, spec_vers:4, csd_structure:2; ++} mmc_csd_t; ++ ++#endif /* __MMC_PXA_P_H__ */ +diff --git a/include/asm-arm/arch-omap3/mux.h b/include/asm-arm/arch-omap3/mux.h +new file mode 100644 +index 0000000..23d5c94 +--- /dev/null ++++ b/include/asm-arm/arch-omap3/mux.h +@@ -0,0 +1,407 @@ ++/* ++ * (C) Copyright 2006 ++ * Texas Instruments, ++ * Syed Mohammed Khasim ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++#ifndef _OMAP3430_MUX_H_ ++#define _OMAP3430_MUX_H_ ++ ++/* ++ * IEN - Input Enable ++ * IDIS - Input Disable ++ * PTD - Pull type Down ++ * PTU - Pull type Up ++ * DIS - Pull type selection is inactive ++ * EN - Pull type selection is active ++ * M0 - Mode 0 ++ */ ++ ++#define IEN (1 << 8) ++ ++#define IDIS (0 << 8) ++#define PTU (1 << 4) ++#define PTD (0 << 4) ++#define EN (1 << 3) ++#define DIS (0 << 3) ++ ++#define M0 0 ++#define M1 1 ++#define M2 2 ++#define M3 3 ++#define M4 4 ++#define M5 5 ++#define M6 6 ++#define M7 7 ++ ++/* ++ * To get the actual address the offset has to added ++ * with OMAP34XX_CTRL_BASE to get the actual address ++ */ ++ ++ /*SDRC*/ ++#define CONTROL_PADCONF_SDRC_D0 0x0030 ++#define CONTROL_PADCONF_SDRC_D1 0x0032 ++#define CONTROL_PADCONF_SDRC_D2 0x0034 ++#define CONTROL_PADCONF_SDRC_D3 0x0036 ++#define CONTROL_PADCONF_SDRC_D4 0x0038 ++#define CONTROL_PADCONF_SDRC_D5 0x003A ++#define CONTROL_PADCONF_SDRC_D6 0x003C ++#define CONTROL_PADCONF_SDRC_D7 0x003E ++#define CONTROL_PADCONF_SDRC_D8 0x0040 ++#define CONTROL_PADCONF_SDRC_D9 0x0042 ++#define CONTROL_PADCONF_SDRC_D10 0x0044 ++#define CONTROL_PADCONF_SDRC_D11 0x0046 ++#define CONTROL_PADCONF_SDRC_D12 0x0048 ++#define CONTROL_PADCONF_SDRC_D13 0x004A ++#define CONTROL_PADCONF_SDRC_D14 0x004C ++#define CONTROL_PADCONF_SDRC_D15 0x004E ++#define CONTROL_PADCONF_SDRC_D16 0x0050 ++#define CONTROL_PADCONF_SDRC_D17 0x0052 ++#define CONTROL_PADCONF_SDRC_D18 0x0054 ++#define CONTROL_PADCONF_SDRC_D19 0x0056 ++#define CONTROL_PADCONF_SDRC_D20 0x0058 ++#define CONTROL_PADCONF_SDRC_D21 0x005A ++#define CONTROL_PADCONF_SDRC_D22 0x005C ++#define CONTROL_PADCONF_SDRC_D23 0x005E ++#define CONTROL_PADCONF_SDRC_D24 0x0060 ++#define CONTROL_PADCONF_SDRC_D25 0x0062 ++#define CONTROL_PADCONF_SDRC_D26 0x0064 ++#define CONTROL_PADCONF_SDRC_D27 0x0066 ++#define CONTROL_PADCONF_SDRC_D28 0x0068 ++#define CONTROL_PADCONF_SDRC_D29 0x006A ++#define CONTROL_PADCONF_SDRC_D30 0x006C ++#define CONTROL_PADCONF_SDRC_D31 0x006E ++#define CONTROL_PADCONF_SDRC_CLK 0x0070 ++#define CONTROL_PADCONF_SDRC_DQS0 0x0072 ++#define CONTROL_PADCONF_SDRC_DQS1 0x0074 ++#define CONTROL_PADCONF_SDRC_DQS2 0x0076 ++#define CONTROL_PADCONF_SDRC_DQS3 0x0078 ++ /*GPMC*/ ++#define CONTROL_PADCONF_GPMC_A1 0x007A ++#define CONTROL_PADCONF_GPMC_A2 0x007C ++#define CONTROL_PADCONF_GPMC_A3 0x007E ++#define CONTROL_PADCONF_GPMC_A4 0x0080 ++#define CONTROL_PADCONF_GPMC_A5 0x0082 ++#define CONTROL_PADCONF_GPMC_A6 0x0084 ++#define CONTROL_PADCONF_GPMC_A7 0x0086 ++#define CONTROL_PADCONF_GPMC_A8 0x0088 ++#define CONTROL_PADCONF_GPMC_A9 0x008A ++#define CONTROL_PADCONF_GPMC_A10 0x008C ++#define CONTROL_PADCONF_GPMC_D0 0x008E ++#define CONTROL_PADCONF_GPMC_D1 0x0090 ++#define CONTROL_PADCONF_GPMC_D2 0x0092 ++#define CONTROL_PADCONF_GPMC_D3 0x0094 ++#define CONTROL_PADCONF_GPMC_D4 0x0096 ++#define CONTROL_PADCONF_GPMC_D5 0x0098 ++#define CONTROL_PADCONF_GPMC_D6 0x009A ++#define CONTROL_PADCONF_GPMC_D7 0x009C ++#define CONTROL_PADCONF_GPMC_D8 0x009E ++#define CONTROL_PADCONF_GPMC_D9 0x00A0 ++#define CONTROL_PADCONF_GPMC_D10 0x00A2 ++#define CONTROL_PADCONF_GPMC_D11 0x00A4 ++#define CONTROL_PADCONF_GPMC_D12 0x00A6 ++#define CONTROL_PADCONF_GPMC_D13 0x00A8 ++#define CONTROL_PADCONF_GPMC_D14 0x00AA ++#define CONTROL_PADCONF_GPMC_D15 0x00AC ++#define CONTROL_PADCONF_GPMC_nCS0 0x00AE ++#define CONTROL_PADCONF_GPMC_nCS1 0x00B0 ++#define CONTROL_PADCONF_GPMC_nCS2 0x00B2 ++#define CONTROL_PADCONF_GPMC_nCS3 0x00B4 ++#define CONTROL_PADCONF_GPMC_nCS4 0x00B6 ++#define CONTROL_PADCONF_GPMC_nCS5 0x00B8 ++#define CONTROL_PADCONF_GPMC_nCS6 0x00BA ++#define CONTROL_PADCONF_GPMC_nCS7 0x00BC ++#define CONTROL_PADCONF_GPMC_CLK 0x00BE ++#define CONTROL_PADCONF_GPMC_nADV_ALE 0x00C0 ++#define CONTROL_PADCONF_GPMC_nOE 0x00C2 ++#define CONTROL_PADCONF_GPMC_nWE 0x00C4 ++#define CONTROL_PADCONF_GPMC_nBE0_CLE 0x00C6 ++#define CONTROL_PADCONF_GPMC_nBE1 0x00C8 ++#define CONTROL_PADCONF_GPMC_nWP 0x00CA ++#define CONTROL_PADCONF_GPMC_WAIT0 0x00CC ++#define CONTROL_PADCONF_GPMC_WAIT1 0x00CE ++#define CONTROL_PADCONF_GPMC_WAIT2 0x00D0 ++#define CONTROL_PADCONF_GPMC_WAIT3 0x00D2 ++ /*DSS*/ ++#define CONTROL_PADCONF_DSS_PCLK 0x00D4 ++#define CONTROL_PADCONF_DSS_HSYNC 0x00D6 ++#define CONTROL_PADCONF_DSS_VSYNC 0x00D8 ++#define CONTROL_PADCONF_DSS_ACBIAS 0x00DA ++#define CONTROL_PADCONF_DSS_DATA0 0x00DC ++#define CONTROL_PADCONF_DSS_DATA1 0x00DE ++#define CONTROL_PADCONF_DSS_DATA2 0x00E0 ++#define CONTROL_PADCONF_DSS_DATA3 0x00E2 ++#define CONTROL_PADCONF_DSS_DATA4 0x00E4 ++#define CONTROL_PADCONF_DSS_DATA5 0x00E6 ++#define CONTROL_PADCONF_DSS_DATA6 0x00E8 ++#define CONTROL_PADCONF_DSS_DATA7 0x00EA ++#define CONTROL_PADCONF_DSS_DATA8 0x00EC ++#define CONTROL_PADCONF_DSS_DATA9 0x00EE ++#define CONTROL_PADCONF_DSS_DATA10 0x00F0 ++#define CONTROL_PADCONF_DSS_DATA11 0x00F2 ++#define CONTROL_PADCONF_DSS_DATA12 0x00F4 ++#define CONTROL_PADCONF_DSS_DATA13 0x00F6 ++#define CONTROL_PADCONF_DSS_DATA14 0x00F8 ++#define CONTROL_PADCONF_DSS_DATA15 0x00FA ++#define CONTROL_PADCONF_DSS_DATA16 0x00FC ++#define CONTROL_PADCONF_DSS_DATA17 0x00FE ++#define CONTROL_PADCONF_DSS_DATA18 0x0100 ++#define CONTROL_PADCONF_DSS_DATA19 0x0102 ++#define CONTROL_PADCONF_DSS_DATA20 0x0104 ++#define CONTROL_PADCONF_DSS_DATA21 0x0106 ++#define CONTROL_PADCONF_DSS_DATA22 0x0108 ++#define CONTROL_PADCONF_DSS_DATA23 0x010A ++ /*CAMERA*/ ++#define CONTROL_PADCONF_CAM_HS 0x010C ++#define CONTROL_PADCONF_CAM_VS 0x010E ++#define CONTROL_PADCONF_CAM_XCLKA 0x0110 ++#define CONTROL_PADCONF_CAM_PCLK 0x0112 ++#define CONTROL_PADCONF_CAM_FLD 0x0114 ++#define CONTROL_PADCONF_CAM_D0 0x0116 ++#define CONTROL_PADCONF_CAM_D1 0x0118 ++#define CONTROL_PADCONF_CAM_D2 0x011A ++#define CONTROL_PADCONF_CAM_D3 0x011C ++#define CONTROL_PADCONF_CAM_D4 0x011E ++#define CONTROL_PADCONF_CAM_D5 0x0120 ++#define CONTROL_PADCONF_CAM_D6 0x0122 ++#define CONTROL_PADCONF_CAM_D7 0x0124 ++#define CONTROL_PADCONF_CAM_D8 0x0126 ++#define CONTROL_PADCONF_CAM_D9 0x0128 ++#define CONTROL_PADCONF_CAM_D10 0x012A ++#define CONTROL_PADCONF_CAM_D11 0x012C ++#define CONTROL_PADCONF_CAM_XCLKB 0x012E ++#define CONTROL_PADCONF_CAM_WEN 0x0130 ++#define CONTROL_PADCONF_CAM_STROBE 0x0132 ++#define CONTROL_PADCONF_CSI2_DX0 0x0134 ++#define CONTROL_PADCONF_CSI2_DY0 0x0136 ++#define CONTROL_PADCONF_CSI2_DX1 0x0138 ++#define CONTROL_PADCONF_CSI2_DY1 0x013A ++/*Audio Interface */ ++#define CONTROL_PADCONF_McBSP2_FSX 0x013C ++#define CONTROL_PADCONF_McBSP2_CLKX 0x013E ++#define CONTROL_PADCONF_McBSP2_DR 0x0140 ++#define CONTROL_PADCONF_McBSP2_DX 0x0142 ++#define CONTROL_PADCONF_ ++#define CONTROL_PADCONF_MMC1_CLK 0x0144 ++#define CONTROL_PADCONF_MMC1_CMD 0x0146 ++#define CONTROL_PADCONF_MMC1_DAT0 0x0148 ++#define CONTROL_PADCONF_MMC1_DAT1 0x014A ++#define CONTROL_PADCONF_MMC1_DAT2 0x014C ++#define CONTROL_PADCONF_MMC1_DAT3 0x014E ++#define CONTROL_PADCONF_MMC1_DAT4 0x0150 ++#define CONTROL_PADCONF_MMC1_DAT5 0x0152 ++#define CONTROL_PADCONF_MMC1_DAT6 0x0154 ++#define CONTROL_PADCONF_MMC1_DAT7 0x0156 ++/*Wireless LAN */ ++#define CONTROL_PADCONF_MMC2_CLK 0x0158 ++#define CONTROL_PADCONF_MMC2_CMD 0x015A ++#define CONTROL_PADCONF_MMC2_DAT0 0x015C ++#define CONTROL_PADCONF_MMC2_DAT1 0x015E ++#define CONTROL_PADCONF_MMC2_DAT2 0x0160 ++#define CONTROL_PADCONF_MMC2_DAT3 0x0162 ++#define CONTROL_PADCONF_MMC2_DAT4 0x0164 ++#define CONTROL_PADCONF_MMC2_DAT5 0x0166 ++#define CONTROL_PADCONF_MMC2_DAT6 0x0168 ++#define CONTROL_PADCONF_MMC2_DAT7 0x016A ++/*Bluetooth*/ ++#define CONTROL_PADCONF_McBSP3_DX 0x016C ++#define CONTROL_PADCONF_McBSP3_DR 0x016E ++#define CONTROL_PADCONF_McBSP3_CLKX 0x0170 ++#define CONTROL_PADCONF_McBSP3_FSX 0x0172 ++#define CONTROL_PADCONF_UART2_CTS 0x0174 ++#define CONTROL_PADCONF_UART2_RTS 0x0176 ++#define CONTROL_PADCONF_UART2_TX 0x0178 ++#define CONTROL_PADCONF_UART2_RX 0x017A ++/*Modem Interface */ ++#define CONTROL_PADCONF_UART1_TX 0x017C ++#define CONTROL_PADCONF_UART1_RTS 0x017E ++#define CONTROL_PADCONF_UART1_CTS 0x0180 ++#define CONTROL_PADCONF_UART1_RX 0x0182 ++#define CONTROL_PADCONF_McBSP4_CLKX 0x0184 ++#define CONTROL_PADCONF_McBSP4_DR 0x0186 ++#define CONTROL_PADCONF_McBSP4_DX 0x0188 ++#define CONTROL_PADCONF_McBSP4_FSX 0x018A ++#define CONTROL_PADCONF_McBSP1_CLKR 0x018C ++#define CONTROL_PADCONF_McBSP1_FSR 0x018E ++#define CONTROL_PADCONF_McBSP1_DX 0x0190 ++#define CONTROL_PADCONF_McBSP1_DR 0x0192 ++#define CONTROL_PADCONF_McBSP_CLKS 0x0194 ++#define CONTROL_PADCONF_McBSP1_FSX 0x0196 ++#define CONTROL_PADCONF_McBSP1_CLKX 0x0198 ++/*Serial Interface*/ ++#define CONTROL_PADCONF_UART3_CTS_RCTX 0x019A ++#define CONTROL_PADCONF_UART3_RTS_SD 0x019C ++#define CONTROL_PADCONF_UART3_RX_IRRX 0x019E ++#define CONTROL_PADCONF_UART3_TX_IRTX 0x01A0 ++#define CONTROL_PADCONF_HSUSB0_CLK 0x01A2 ++#define CONTROL_PADCONF_HSUSB0_STP 0x01A4 ++#define CONTROL_PADCONF_HSUSB0_DIR 0x01A6 ++#define CONTROL_PADCONF_HSUSB0_NXT 0x01A8 ++#define CONTROL_PADCONF_HSUSB0_DATA0 0x01AA ++#define CONTROL_PADCONF_HSUSB0_DATA1 0x01AC ++#define CONTROL_PADCONF_HSUSB0_DATA2 0x01AE ++#define CONTROL_PADCONF_HSUSB0_DATA3 0x01B0 ++#define CONTROL_PADCONF_HSUSB0_DATA4 0x01B2 ++#define CONTROL_PADCONF_HSUSB0_DATA5 0x01B4 ++#define CONTROL_PADCONF_HSUSB0_DATA6 0x01B6 ++#define CONTROL_PADCONF_HSUSB0_DATA7 0x01B8 ++#define CONTROL_PADCONF_I2C1_SCL 0x01BA ++#define CONTROL_PADCONF_I2C1_SDA 0x01BC ++#define CONTROL_PADCONF_I2C2_SCL 0x01BE ++#define CONTROL_PADCONF_I2C2_SDA 0x01C0 ++#define CONTROL_PADCONF_I2C3_SCL 0x01C2 ++#define CONTROL_PADCONF_I2C3_SDA 0x01C4 ++#define CONTROL_PADCONF_I2C4_SCL 0x0A00 ++#define CONTROL_PADCONF_I2C4_SDA 0x0A02 ++#define CONTROL_PADCONF_HDQ_SIO 0x01C6 ++#define CONTROL_PADCONF_McSPI1_CLK 0x01C8 ++#define CONTROL_PADCONF_McSPI1_SIMO 0x01CA ++#define CONTROL_PADCONF_McSPI1_SOMI 0x01CC ++#define CONTROL_PADCONF_McSPI1_CS0 0x01CE ++#define CONTROL_PADCONF_McSPI1_CS1 0x01D0 ++#define CONTROL_PADCONF_McSPI1_CS2 0x01D2 ++#define CONTROL_PADCONF_McSPI1_CS3 0x01D4 ++#define CONTROL_PADCONF_McSPI2_CLK 0x01D6 ++#define CONTROL_PADCONF_McSPI2_SIMO 0x01D8 ++#define CONTROL_PADCONF_McSPI2_SOMI 0x01DA ++#define CONTROL_PADCONF_McSPI2_CS0 0x01DC ++#define CONTROL_PADCONF_McSPI2_CS1 0x01DE ++/*Control and debug */ ++#define CONTROL_PADCONF_SYS_32K 0x0A04 ++#define CONTROL_PADCONF_SYS_CLKREQ 0x0A06 ++#define CONTROL_PADCONF_SYS_nIRQ 0x01E0 ++#define CONTROL_PADCONF_SYS_BOOT0 0x0A0A ++#define CONTROL_PADCONF_SYS_BOOT1 0x0A0C ++#define CONTROL_PADCONF_SYS_BOOT2 0x0A0E ++#define CONTROL_PADCONF_SYS_BOOT3 0x0A10 ++#define CONTROL_PADCONF_SYS_BOOT4 0x0A12 ++#define CONTROL_PADCONF_SYS_BOOT5 0x0A14 ++#define CONTROL_PADCONF_SYS_BOOT6 0x0A16 ++#define CONTROL_PADCONF_SYS_OFF_MODE 0x0A18 ++#define CONTROL_PADCONF_SYS_CLKOUT1 0x0A1A ++#define CONTROL_PADCONF_SYS_CLKOUT2 0x01E2 ++#define CONTROL_PADCONF_JTAG_nTRST 0x0A1C ++#define CONTROL_PADCONF_JTAG_TCK 0x0A1E ++#define CONTROL_PADCONF_JTAG_TMS 0x0A20 ++#define CONTROL_PADCONF_JTAG_TDI 0x0A22 ++#define CONTROL_PADCONF_JTAG_EMU0 0x0A24 ++#define CONTROL_PADCONF_JTAG_EMU1 0x0A26 ++#define CONTROL_PADCONF_ETK_CLK 0x0A28 ++#define CONTROL_PADCONF_ETK_CTL 0x0A2A ++#define CONTROL_PADCONF_ETK_D0 0x0A2C ++#define CONTROL_PADCONF_ETK_D1 0x0A2E ++#define CONTROL_PADCONF_ETK_D2 0x0A30 ++#define CONTROL_PADCONF_ETK_D3 0x0A32 ++#define CONTROL_PADCONF_ETK_D4 0x0A34 ++#define CONTROL_PADCONF_ETK_D5 0x0A36 ++#define CONTROL_PADCONF_ETK_D6 0x0A38 ++#define CONTROL_PADCONF_ETK_D7 0x0A3A ++#define CONTROL_PADCONF_ETK_D8 0x0A3C ++#define CONTROL_PADCONF_ETK_D9 0x0A3E ++#define CONTROL_PADCONF_ETK_D10 0x0A40 ++#define CONTROL_PADCONF_ETK_D11 0x0A42 ++#define CONTROL_PADCONF_ETK_D12 0x0A44 ++#define CONTROL_PADCONF_ETK_D13 0x0A46 ++#define CONTROL_PADCONF_ETK_D14 0x0A48 ++#define CONTROL_PADCONF_ETK_D15 0x0A4A ++#define CONTROL_PADCONF_ETK_CLK_ES2 0x05D8 ++#define CONTROL_PADCONF_ETK_CTL_ES2 0x05DA ++#define CONTROL_PADCONF_ETK_D0_ES2 0x05DC ++#define CONTROL_PADCONF_ETK_D1_ES2 0x05DE ++#define CONTROL_PADCONF_ETK_D2_ES2 0x05E0 ++#define CONTROL_PADCONF_ETK_D3_ES2 0x05E2 ++#define CONTROL_PADCONF_ETK_D4_ES2 0x05E4 ++#define CONTROL_PADCONF_ETK_D5_ES2 0x05E6 ++#define CONTROL_PADCONF_ETK_D6_ES2 0x05E8 ++#define CONTROL_PADCONF_ETK_D7_ES2 0x05EA ++#define CONTROL_PADCONF_ETK_D8_ES2 0x05EC ++#define CONTROL_PADCONF_ETK_D9_ES2 0x05EE ++#define CONTROL_PADCONF_ETK_D10_ES2 0x05F0 ++#define CONTROL_PADCONF_ETK_D11_ES2 0x05F2 ++#define CONTROL_PADCONF_ETK_D12_ES2 0x05F4 ++#define CONTROL_PADCONF_ETK_D13_ES2 0x05F6 ++#define CONTROL_PADCONF_ETK_D14_ES2 0x05F8 ++#define CONTROL_PADCONF_ETK_D15_ES2 0x05FA ++/*Die to Die */ ++#define CONTROL_PADCONF_d2d_mcad0 0x01E4 ++#define CONTROL_PADCONF_d2d_mcad1 0x01E6 ++#define CONTROL_PADCONF_d2d_mcad2 0x01E8 ++#define CONTROL_PADCONF_d2d_mcad3 0x01EA ++#define CONTROL_PADCONF_d2d_mcad4 0x01EC ++#define CONTROL_PADCONF_d2d_mcad5 0x01EE ++#define CONTROL_PADCONF_d2d_mcad6 0x01F0 ++#define CONTROL_PADCONF_d2d_mcad7 0x01F2 ++#define CONTROL_PADCONF_d2d_mcad8 0x01F4 ++#define CONTROL_PADCONF_d2d_mcad9 0x01F6 ++#define CONTROL_PADCONF_d2d_mcad10 0x01F8 ++#define CONTROL_PADCONF_d2d_mcad11 0x01FA ++#define CONTROL_PADCONF_d2d_mcad12 0x01FC ++#define CONTROL_PADCONF_d2d_mcad13 0x01FE ++#define CONTROL_PADCONF_d2d_mcad14 0x0200 ++#define CONTROL_PADCONF_d2d_mcad15 0x0202 ++#define CONTROL_PADCONF_d2d_mcad16 0x0204 ++#define CONTROL_PADCONF_d2d_mcad17 0x0206 ++#define CONTROL_PADCONF_d2d_mcad18 0x0208 ++#define CONTROL_PADCONF_d2d_mcad19 0x020A ++#define CONTROL_PADCONF_d2d_mcad20 0x020C ++#define CONTROL_PADCONF_d2d_mcad21 0x020E ++#define CONTROL_PADCONF_d2d_mcad22 0x0210 ++#define CONTROL_PADCONF_d2d_mcad23 0x0212 ++#define CONTROL_PADCONF_d2d_mcad24 0x0214 ++#define CONTROL_PADCONF_d2d_mcad25 0x0216 ++#define CONTROL_PADCONF_d2d_mcad26 0x0218 ++#define CONTROL_PADCONF_d2d_mcad27 0x021A ++#define CONTROL_PADCONF_d2d_mcad28 0x021C ++#define CONTROL_PADCONF_d2d_mcad29 0x021E ++#define CONTROL_PADCONF_d2d_mcad30 0x0220 ++#define CONTROL_PADCONF_d2d_mcad31 0x0222 ++#define CONTROL_PADCONF_d2d_mcad32 0x0224 ++#define CONTROL_PADCONF_d2d_mcad33 0x0226 ++#define CONTROL_PADCONF_d2d_mcad34 0x0228 ++#define CONTROL_PADCONF_d2d_mcad35 0x022A ++#define CONTROL_PADCONF_d2d_mcad36 0x022C ++#define CONTROL_PADCONF_d2d_clk26mi 0x022E ++#define CONTROL_PADCONF_d2d_nrespwron 0x0230 ++#define CONTROL_PADCONF_d2d_nreswarm 0x0232 ++#define CONTROL_PADCONF_d2d_arm9nirq 0x0234 ++#define CONTROL_PADCONF_d2d_uma2p6fiq 0x0236 ++#define CONTROL_PADCONF_d2d_spint 0x0238 ++#define CONTROL_PADCONF_d2d_frint 0x023A ++#define CONTROL_PADCONF_d2d_dmareq0 0x023C ++#define CONTROL_PADCONF_d2d_dmareq1 0x023E ++#define CONTROL_PADCONF_d2d_dmareq2 0x0240 ++#define CONTROL_PADCONF_d2d_dmareq3 0x0242 ++#define CONTROL_PADCONF_d2d_n3gtrst 0x0244 ++#define CONTROL_PADCONF_d2d_n3gtdi 0x0246 ++#define CONTROL_PADCONF_d2d_n3gtdo 0x0248 ++#define CONTROL_PADCONF_d2d_n3gtms 0x024A ++#define CONTROL_PADCONF_d2d_n3gtck 0x024C ++#define CONTROL_PADCONF_d2d_n3grtck 0x024E ++#define CONTROL_PADCONF_d2d_mstdby 0x0250 ++#define CONTROL_PADCONF_d2d_swakeup 0x0A4C ++#define CONTROL_PADCONF_d2d_idlereq 0x0252 ++#define CONTROL_PADCONF_d2d_idleack 0x0254 ++#define CONTROL_PADCONF_d2d_mwrite 0x0256 ++#define CONTROL_PADCONF_d2d_swrite 0x0258 ++#define CONTROL_PADCONF_d2d_mread 0x025A ++#define CONTROL_PADCONF_d2d_sread 0x025C ++#define CONTROL_PADCONF_d2d_mbusflag 0x025E ++#define CONTROL_PADCONF_d2d_sbusflag 0x0260 ++#define CONTROL_PADCONF_sdrc_cke0 0x0262 ++#define CONTROL_PADCONF_sdrc_cke1 0x0264 ++#endif +diff --git a/include/asm-arm/arch-omap3/omap3.h b/include/asm-arm/arch-omap3/omap3.h +new file mode 100644 +index 0000000..e9b494f +--- /dev/null ++++ b/include/asm-arm/arch-omap3/omap3.h +@@ -0,0 +1,154 @@ ++/* ++ * (C) Copyright 2006 ++ * Texas Instruments, ++ * Richard Woodruff ++ * Syed Mohammed Khasim ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef _OMAP3430_SYS_H_ ++#define _OMAP3430_SYS_H_ ++ ++#include ++ ++/* ++ * 3430 specific Section ++ */ ++ ++/* Stuff on L3 Interconnect */ ++#define SMX_APE_BASE 0x68000000 ++ ++/* L3 Firewall */ ++#define A_REQINFOPERM0 (SMX_APE_BASE + 0x05048) ++#define A_READPERM0 (SMX_APE_BASE + 0x05050) ++#define A_WRITEPERM0 (SMX_APE_BASE + 0x05058) ++ ++/* GPMC */ ++#define OMAP34XX_GPMC_BASE (0x6E000000) ++ ++/* SMS */ ++#define OMAP34XX_SMS_BASE 0x6C000000 ++ ++/* SDRC */ ++#define OMAP34XX_SDRC_BASE 0x6D000000 ++ ++/* ++ * L4 Peripherals - L4 Wakeup and L4 Core now ++ */ ++#define OMAP34XX_CORE_L4_IO_BASE 0x48000000 ++ ++#define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000 ++ ++#define OMAP34XX_L4_PER 0x49000000 ++ ++#define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE ++ ++/* CONTROL */ ++#define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE+0x2000) ++ ++/* TAP information dont know for 3430*/ ++#define OMAP34XX_TAP_BASE (0x49000000) /*giving some junk for virtio */ ++ ++/* UART */ ++#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE+0x6a000) ++#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE+0x6c000) ++#define OMAP34XX_UART3 (OMAP34XX_L4_PER+0x20000) ++ ++/* General Purpose Timers */ ++#define OMAP34XX_GPT1 0x48318000 ++#define OMAP34XX_GPT2 0x49032000 ++#define OMAP34XX_GPT3 0x49034000 ++#define OMAP34XX_GPT4 0x49036000 ++#define OMAP34XX_GPT5 0x49038000 ++#define OMAP34XX_GPT6 0x4903A000 ++#define OMAP34XX_GPT7 0x4903C000 ++#define OMAP34XX_GPT8 0x4903E000 ++#define OMAP34XX_GPT9 0x49040000 ++#define OMAP34XX_GPT10 0x48086000 ++#define OMAP34XX_GPT11 0x48088000 ++#define OMAP34XX_GPT12 0x48304000 ++ ++/* WatchDog Timers (1 secure, 3 GP) */ ++#define WD1_BASE (0x4830C000) ++#define WD2_BASE (0x48314000) ++#define WD3_BASE (0x49030000) ++ ++/* 32KTIMER */ ++#define SYNC_32KTIMER_BASE (0x48320000) ++#define S32K_CR (SYNC_32KTIMER_BASE+0x10) ++ ++/* omap3 GPIO registers */ ++#define OMAP34XX_GPIO1_BASE 0x48310000 ++#define OMAP34XX_GPIO2_BASE 0x49050000 ++#define OMAP34XX_GPIO3_BASE 0x49052000 ++#define OMAP34XX_GPIO4_BASE 0x49054000 ++#define OMAP34XX_GPIO5_BASE 0x49056000 ++#define OMAP34XX_GPIO6_BASE 0x49058000 ++ ++/* ++ * SDP3430 specific Section ++ */ ++ ++/* ++ * The 343x's chip selects are programmable. The mask ROM ++ * does configure CS0 to 0x08000000 before dispatch. So, if ++ * you want your code to live below that address, you have to ++ * be prepared to jump though hoops, to reset the base address. ++ * Same as in SDP3430 ++ */ ++#if (CONFIG_3430SDP) ++ ++/* base address for indirect vectors (internal boot mode) */ ++#define SRAM_OFFSET0 0x40000000 ++#define SRAM_OFFSET1 0x00200000 ++#define SRAM_OFFSET2 0x0000F800 ++#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) ++ ++#define LOW_LEVEL_SRAM_STACK 0x4020FFFC ++ ++/* FPGA on Debug board.*/ ++#define ETH_CONTROL_REG (DEBUG_BASE+0x30b) ++#define LAN_RESET_REGISTER (DEBUG_BASE+0x1c) ++ ++#define DIP_SWITCH_INPUT_REG2 (DEBUG_BASE+0x60) ++#define LED_REGISTER (DEBUG_BASE+0x40) ++#define FPGA_REV_REGISTER (DEBUG_BASE+0x10) ++#define EEPROM_MAIN_BRD (DEBUG_BASE+0x10000+0x1800) ++#define EEPROM_CONN_BRD (DEBUG_BASE+0x10000+0x1900) ++#define EEPROM_UI_BRD (DEBUG_BASE+0x10000+0x1A00) ++#define EEPROM_MCAM_BRD (DEBUG_BASE+0x10000+0x1B00) ++#define ENHANCED_UI_EE_NAME "750-2075" ++ ++#elif (CONFIG_OMAP3_BEAGLE) ++ ++/* base address for indirect vectors (internal boot mode) */ ++#define SRAM_OFFSET0 0x40000000 ++#define SRAM_OFFSET1 0x00200000 ++#define SRAM_OFFSET2 0x0000F800 ++#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) ++ ++#define LOW_LEVEL_SRAM_STACK 0x4020FFFC ++ ++#define DEBUG_LED1 149 /* gpio */ ++#define DEBUG_LED2 150 /* gpio */ ++ ++#endif /* endif (CONFIG_3430SDP) */ ++ ++#endif +diff --git a/include/asm-arm/arch-omap3/sizes.h b/include/asm-arm/arch-omap3/sizes.h +new file mode 100644 +index 0000000..c47320e +--- /dev/null ++++ b/include/asm-arm/arch-omap3/sizes.h +@@ -0,0 +1,49 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++/* Size defintions ++ * Copyright (C) ARM Limited 1998. All rights reserved. ++ */ ++ ++#ifndef __sizes_h ++#define __sizes_h 1 ++ ++/* handy sizes */ ++#define SZ_1K 0x00000400 ++#define SZ_4K 0x00001000 ++#define SZ_8K 0x00002000 ++#define SZ_16K 0x00004000 ++#define SZ_32K 0x00008000 ++#define SZ_64K 0x00010000 ++#define SZ_128K 0x00020000 ++#define SZ_256K 0x00040000 ++#define SZ_512K 0x00080000 ++ ++#define SZ_1M 0x00100000 ++#define SZ_2M 0x00200000 ++#define SZ_4M 0x00400000 ++#define SZ_8M 0x00800000 ++#define SZ_16M 0x01000000 ++#define SZ_31M 0x01F00000 ++#define SZ_32M 0x02000000 ++#define SZ_64M 0x04000000 ++#define SZ_128M 0x08000000 ++#define SZ_256M 0x10000000 ++#define SZ_512M 0x20000000 ++ ++#define SZ_1G 0x40000000 ++#define SZ_2G 0x80000000 ++ ++#endif /* __sizes_h */ +diff --git a/include/asm-arm/arch-omap3/sys_info.h b/include/asm-arm/arch-omap3/sys_info.h +new file mode 100644 +index 0000000..c839e01 +--- /dev/null ++++ b/include/asm-arm/arch-omap3/sys_info.h +@@ -0,0 +1,74 @@ ++/* ++ * (C) Copyright 2006 ++ * Texas Instruments, ++ * Richard Woodruff ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef _OMAP34XX_SYS_INFO_H_ ++#define _OMAP34XX_SYS_INFO_H_ ++ ++#define XDR_POP 5 /* package on package part */ ++#define SDR_DISCRETE 4 /* 128M memory SDR module */ ++#define DDR_STACKED 3 /* stacked part on 2422 */ ++#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */ ++#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ ++ ++#define DDR_100 100 /* type found on most mem d-boards */ ++#define DDR_111 111 /* some combo parts */ ++#define DDR_133 133 /* most combo, some mem d-boards */ ++#define DDR_165 165 /* future parts */ ++ ++#define CPU_3430 0x3430 ++ ++/* 343x real hardware: ++ * ES1 = rev 0 ++ */ ++ ++/* 343x code defines: ++ * ES1 = 0+1 = 1 ++ * ES1 = 1+1 = 1 ++ */ ++#define CPU_3430_ES1 1 ++#define CPU_3430_ES2 2 ++ ++/* Currently Virtio models this one */ ++#define CPU_3430_CHIPID 0x0B68A000 ++ ++#define GPMC_MUXED 1 ++#define GPMC_NONMUXED 0 ++ ++#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ ++#define TYPE_NOR 0x000 ++#define TYPE_ONENAND 0x800 ++ ++#define WIDTH_8BIT 0x0000 ++#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ ++ ++#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ ++#define I2C_TRITON2 0x4B /* addres of power group */ ++ ++#define BOOT_FAST_XIP 0x1f ++ ++/* SDP definitions according to FPGA Rev. Is this OK?? */ ++#define SDP_3430_V1 0x1 ++#define SDP_3430_V2 0x2 ++ ++#endif +diff --git a/include/asm-arm/arch-omap3/sys_proto.h b/include/asm-arm/arch-omap3/sys_proto.h +new file mode 100644 +index 0000000..b62bc9f +--- /dev/null ++++ b/include/asm-arm/arch-omap3/sys_proto.h +@@ -0,0 +1,66 @@ ++/* ++ * (C) Copyright 2004-2006 ++ * Texas Instruments, ++ * Richard Woodruff ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++#ifndef _OMAP34XX_SYS_PROTO_H_ ++#define _OMAP34XX_SYS_PROTO_H_ ++ ++void prcm_init(void); ++void per_clocks_enable(void); ++ ++void memif_init(void); ++void sdrc_init(void); ++void do_sdrc_init(u32, u32); ++void gpmc_init(void); ++ ++void ether_init(void); ++void watchdog_init(void); ++void set_muxconf_regs(void); ++ ++u32 get_cpu_type(void); ++u32 get_cpu_rev(void); ++u32 get_mem_type(void); ++u32 get_sysboot_value(void); ++u32 get_gpmc0_base(void); ++u32 is_gpmc_muxed(void); ++u32 get_gpmc0_type(void); ++u32 get_gpmc0_width(void); ++u32 get_board_type(void); ++void display_board_info(u32); ++void update_mux(u32, u32); ++u32 get_sdr_cs_size(u32 offset); ++u32 running_in_sdram(void); ++u32 running_in_sram(void); ++u32 running_in_flash(void); ++u32 running_from_internal_boot(void); ++u32 get_device_type(void); ++void l2cache_enable(void); ++void secureworld_exit(void); ++void setup_auxcr(void); ++void try_unlock_memory(void); ++u32 get_boot_type(void); ++void audio_init(void); ++void dss_init(void); ++void arm_cache_flush(void); ++void v7_flush_dcache_all(u32); ++void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value); ++u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound); ++void sdelay(unsigned long loops); ++ ++#endif +diff --git a/include/configs/omap3530beagle.h b/include/configs/omap3530beagle.h +new file mode 100644 +index 0000000..03dc31b +--- /dev/null ++++ b/include/configs/omap3530beagle.h +@@ -0,0 +1,285 @@ ++/* ++ * (C) Copyright 2006 ++ * Texas Instruments. ++ * Richard Woodruff ++ * Syed Mohammed Khasim ++ * ++ * Configuration settings for the 3430 TI SDP3430 board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* ++ * High Level Configuration Options ++ */ ++#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ ++#define CONFIG_OMAP 1 /* in a TI OMAP core */ ++#define CONFIG_OMAP34XX 1 /* which is a 34XX */ ++#define CONFIG_OMAP3430 1 /* which is in a 3430 */ ++#define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ ++#define CONFIG_DOS_PARTITION 1 ++ ++#include /* get chip and board defs */ ++ ++/* Clock Defines */ ++#define V_OSCK 26000000 /* Clock output from T2 */ ++#define V_SCLK (V_OSCK >> 1) ++ ++#undef CONFIG_USE_IRQ /* no support for IRQs */ ++#define CONFIG_MISC_INIT_R ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++#define CONFIG_REVISION_TAG 1 ++ ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_ENV_SIZE SZ_128K /* Total Size Environment Sector */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) ++#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ ++ ++/* ++ * Hardware drivers ++ */ ++ ++/* ++ * NS16550 Configuration ++ */ ++#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ ++ ++#define CFG_NS16550 ++#define CFG_NS16550_SERIAL ++#define CFG_NS16550_REG_SIZE (-4) ++#define CFG_NS16550_CLK V_NS16550_CLK ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_CONS_INDEX 3 ++#define CFG_NS16550_COM3 OMAP34XX_UART3 ++#define CONFIG_SERIAL3 3 /* UART3 on Beagle Rev 2 */ ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_ENV_OVERWRITE ++#define CONFIG_BAUDRATE 115200 ++#define CFG_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} ++#define CONFIG_MMC 1 ++#define CFG_MMC_BASE 0xF0000000 ++#define CONFIG_DOS_PARTITION 1 ++ ++/* commands to include */ ++ ++#define CONFIG_CMD_EXT2 /* EXT2 Support */ ++#define CONFIG_CMD_FAT /* FAT support */ ++#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ ++ ++#define CONFIG_CMD_I2C /* I2C serial bus support */ ++#define CONFIG_CMD_MMC /* MMC support */ ++#define CONFIG_CMD_NAND /* NAND support */ ++ ++#define CONFIG_CMD_AUTOSCRIPT /* autoscript support */ ++#define CONFIG_CMD_BDI /* bdinfo */ ++#define CONFIG_CMD_BOOTD /* bootd */ ++#define CONFIG_CMD_CONSOLE /* coninfo */ ++#define CONFIG_CMD_ECHO /* echo arguments */ ++#define CONFIG_CMD_ENV /* saveenv */ ++#define CONFIG_CMD_ITEST /* Integer (and string) test */ ++#define CONFIG_CMD_LOADB /* loadb */ ++#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ ++#define CONFIG_CMD_MISC /* misc functions like sleep etc*/ ++#define CONFIG_CMD_RUN /* run command in env variable */ ++ ++#define CFG_NO_FLASH ++#define CFG_I2C_SPEED 100 ++#define CFG_I2C_SLAVE 1 ++#define CFG_I2C_BUS 0 ++#define CFG_I2C_BUS_SELECT 1 ++#define CONFIG_DRIVER_OMAP34XX_I2C 1 ++ ++/* ++ * Board NAND Info. ++ */ ++#define CFG_NAND_ADDR NAND_BASE /* physical address to access nand */ ++#define CFG_NAND_BASE NAND_BASE /* physical address to access nand at CS0 */ ++#define CFG_NAND_WIDTH_16 ++ ++#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ ++#define SECTORSIZE 512 ++ ++#define NAND_ALLOW_ERASE_ALL ++#define ADDR_COLUMN 1 ++#define ADDR_PAGE 2 ++#define ADDR_COLUMN_PAGE 3 ++ ++#define NAND_ChipID_UNKNOWN 0x00 ++#define NAND_MAX_FLOORS 1 ++#define NAND_MAX_CHIPS 1 ++#define NAND_NO_RB 1 ++#define CFG_NAND_WP ++ ++#define CONFIG_JFFS2_NAND ++#define CONFIG_JFFS2_DEV "nand0" /* nand device jffs2 lives on */ ++#define CONFIG_JFFS2_PART_OFFSET 0x680000 /* start of jffs2 partition */ ++#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 partition */ ++ ++/* Environment information */ ++#define CONFIG_BOOTDELAY 10 ++ ++#define CONFIG_BOOTCOMMAND \ ++ "mmcinit;fatload mmc 0 0x80300000 uImage; fatload mmc 0 0x81600000 rd-ext2.bin; bootm 0x80300000\0" ++ ++#define CONFIG_BOOTARGS "setenv bootargs console=ttyS2,115200n8 ramdisk_size=3072 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,3M " ++ ++#define CONFIG_NETMASK 255.255.254.0 ++#define CONFIG_IPADDR 128.247.77.90 ++#define CONFIG_SERVERIP 128.247.77.158 ++#define CONFIG_BOOTFILE "uImage" ++#define CONFIG_AUTO_COMPLETE 1 ++/* ++ * Miscellaneous configurable options ++ */ ++#define V_PROMPT "OMAP3 beagleboard.org # " ++ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT V_PROMPT ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++/* Print Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++ ++#define CFG_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest works on */ ++#define CFG_MEMTEST_END (OMAP34XX_SDRC_CS0+SZ_31M) ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load address */ ++ ++/* 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by ++ * 32KHz clk, or from external sig. This rate is divided by a local divisor. ++ */ ++#define V_PVT 7 ++ ++#define CFG_TIMERBASE OMAP34XX_GPT2 ++#define CFG_PVT V_PVT /* 2^(pvt+1) */ ++#define CFG_HZ ((V_SCLK)/(2 << CFG_PVT)) ++ ++/*----------------------------------------------------------------------- ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE SZ_128K /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ ++#endif ++ ++/*----------------------------------------------------------------------- ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ ++#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 ++#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ ++#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 ++ ++/* SDRAM Bank Allocation method */ ++#define SDRC_R_B_C 1 ++ ++/*----------------------------------------------------------------------- ++ * FLASH and environment organization ++ */ ++ ++/* **** PISMO SUPPORT *** */ ++ ++/* Configure the PISMO */ ++#define PISMO1_NOR_SIZE_SDPV2 GPMC_SIZE_128M ++#define PISMO1_NOR_SIZE GPMC_SIZE_64M ++ ++#define PISMO1_NAND_SIZE GPMC_SIZE_128M ++#define PISMO1_ONEN_SIZE GPMC_SIZE_128M ++#define DBG_MPDB_SIZE GPMC_SIZE_16M ++#define PISMO2_SIZE 0 ++ ++#define CFG_MAX_FLASH_SECT (520) /* max number of sectors on one chip */ ++#define CFG_MAX_FLASH_BANKS 2 /* max number of flash banks */ ++#define CFG_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ ++ ++#define PHYS_FLASH_SIZE_SDPV2 SZ_128M ++#define PHYS_FLASH_SIZE SZ_32M ++ ++#define CFG_FLASH_BASE boot_flash_base ++#define PHYS_FLASH_SECT_SIZE boot_flash_sec ++/* Dummy declaration of flash banks to get compilation right */ ++#define CFG_FLASH_BANKS_LIST {0, 0} ++ ++#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at start of flash */ ++#define CFG_ONENAND_BASE ONENAND_MAP ++ ++#define CFG_ENV_IS_IN_NAND 1 ++#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ ++#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ ++ ++#define CFG_ENV_SECT_SIZE boot_flash_sec ++#define CFG_ENV_OFFSET boot_flash_off ++#define CFG_ENV_ADDR SMNAND_ENV_OFFSET ++ ++/*----------------------------------------------------------------------- ++ * CFI FLASH driver setup ++ */ ++/* timeout values are in ticks */ ++#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ ++#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ ++ ++/* Flash banks JFFS2 should use */ ++#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE) ++#define CFG_JFFS2_MEM_NAND ++#define CFG_JFFS2_FIRST_BANK CFG_MAX_FLASH_BANKS /* use flash_info[2] */ ++#define CFG_JFFS2_NUM_BANKS 1 ++ ++#define ENV_IS_VARIABLE 1 ++ ++#ifndef __ASSEMBLY__ ++extern unsigned int nand_cs_base; ++extern unsigned int boot_flash_base; ++extern volatile unsigned int boot_flash_env_addr; ++extern unsigned int boot_flash_off; ++extern unsigned int boot_flash_sec; ++extern unsigned int boot_flash_type; ++#endif ++ ++ ++#define WRITE_NAND_COMMAND(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_CMD)) ++#define WRITE_NAND_ADDRESS(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_ADR)) ++#define WRITE_NAND(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_DAT)) ++#define READ_NAND(adr) __raw_readw((nand_cs_base + GPMC_NAND_DAT)) ++ ++/* Other NAND Access APIs */ ++#define NAND_WP_OFF() do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) ++#define NAND_WP_ON() do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) ++#define NAND_DISABLE_CE(nand) ++#define NAND_ENABLE_CE(nand) ++#define NAND_WAIT_READY(nand) udelay(10) ++ ++#endif /* __CONFIG_H */ diff --git a/packages/u-boot/u-boot-git/beagleboard/name.patch b/packages/u-boot/u-boot-git/beagleboard/name.patch new file mode 100644 index 0000000..1729662 --- /dev/null +++ b/packages/u-boot/u-boot-git/beagleboard/name.patch @@ -0,0 +1,14 @@ +--- u-boot/Makefile-orig 2008-05-29 14:00:30.000000000 -0700 ++++ u-boot/Makefile 2008-05-29 13:59:13.000000000 -0700 +@@ -2550,8 +2550,8 @@ omap2430sdp_config : unconfig + ######################################################################### + ## ARM CORTEX Systems + ######################################################################### +-omap3530beagle_config : unconfig +- @./mkconfig $(@:_config=) arm omap3 omap3530beagle ++beagleboard_config : unconfig ++ @./mkconfig omap3530beagle arm omap3 omap3530beagle + + ######################################################################### + ## XScale Systems + diff --git a/packages/u-boot/u-boot-omap3beagleboard-1.1.4/.mtn2git_empty b/packages/u-boot/u-boot-omap3beagleboard-1.1.4/.mtn2git_empty new file mode 100644 index 0000000..e69de29 diff --git a/packages/u-boot/u-boot-omap3beagleboard-1.1.4/500mhz-l2enable.patch b/packages/u-boot/u-boot-omap3beagleboard-1.1.4/500mhz-l2enable.patch new file mode 100644 index 0000000..0dce8f7 --- /dev/null +++ b/packages/u-boot/u-boot-omap3beagleboard-1.1.4/500mhz-l2enable.patch @@ -0,0 +1,42 @@ +--- u-boot.orig/board/omap3530beagle/clock.c ++++ u-boot/board/omap3530beagle/clock.c +@@ -167,7 +167,7 @@ void prcm_init(void) + /* Getting the base address of Core DPLL param table*/ + dpll_param_p = (dpll_param *)get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ +- dpll_param_p = dpll_param_p + 2*clk_index + sil_index; ++ dpll_param_p = dpll_param_p + 3*clk_index + sil_index; + if(xip_safe){ + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ +@@ -254,7 +254,7 @@ void prcm_init(void) + /* Getting the base address to MPU DPLL param table*/ + dpll_param_p = (dpll_param *)get_mpu_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ +- dpll_param_p = dpll_param_p + 2*clk_index + sil_index; ++ dpll_param_p = dpll_param_p + 3*clk_index + sil_index; + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ +@@ -266,7 +266,7 @@ void prcm_init(void) + /* Getting the base address to IVA DPLL param table*/ + dpll_param_p = (dpll_param *)get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ +- dpll_param_p = dpll_param_p + 2*clk_index + sil_index; ++ dpll_param_p = dpll_param_p + 3*clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); +--- u-boot_1_1_4_beagle.orig/cpu/omap3/cpu.c ++++ u-boot_1_1_4_beagle/cpu/omap3/cpu.c +@@ -129,9 +129,7 @@ int cleanup_before_linux (void) + + /* invalidate I-cache */ + arm_cache_flush(); +-#ifndef CONFIG_L2_OFF +- /* turn off L2 cache */ +- l2cache_disable(); ++#ifndef CONFIG_L2_OFF + /* invalidate L2 cache also */ + v7_flush_dcache_all(get_device_type()); + #endif diff --git a/packages/u-boot/u-boot-omap3beagleboard-1.1.4/armv7-a.patch b/packages/u-boot/u-boot-omap3beagleboard-1.1.4/armv7-a.patch new file mode 100644 index 0000000..49f8de0 --- /dev/null +++ b/packages/u-boot/u-boot-omap3beagleboard-1.1.4/armv7-a.patch @@ -0,0 +1,11 @@ +--- u-boot/cpu/omap3/config.mk-orig 2008-05-27 16:46:45.000000000 -0700 ++++ u-boot/cpu/omap3/config.mk 2008-05-29 12:50:49.000000000 -0700 +@@ -23,7 +23,7 @@ + PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ + -msoft-float + +-PLATFORM_CPPFLAGS += -march=armv7a ++PLATFORM_CPPFLAGS += -march=armv7-a + # ========================================================================= + # + # Supply options according to compiler version diff --git a/packages/u-boot/u-boot-omap3beagleboard-1.1.4/disable-tone-logo.patch b/packages/u-boot/u-boot-omap3beagleboard-1.1.4/disable-tone-logo.patch new file mode 100644 index 0000000..829a72e --- /dev/null +++ b/packages/u-boot/u-boot-omap3beagleboard-1.1.4/disable-tone-logo.patch @@ -0,0 +1,46 @@ +--- u-boot.orig/board/omap3530beagle/omap3530beagle.c ++++ u-boot/board/omap3530beagle/omap3530beagle.c +@@ -33,7 +33,7 @@ + #include + #include + +-#include "beagle_logo_FNL_2.h" ++//#include "beagle_logo_FNL_2.h" + + #if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined(CFG_NAND_LEGACY) + #include +@@ -230,6 +230,7 @@ void s_init(void) + sdrc_init(); + } + ++#if 0 + ushort tone[] = { + 0x0ce4, 0x0ce4, 0x1985, 0x1985, 0x25A1, 0x25A1, 0x30FD, 0x30FE, + 0x3B56, 0x3B55, 0x447A, 0x447A, 0x4C3B, 0x4C3C, 0x526D, 0x526C, +@@ -457,6 +458,7 @@ int audio_init() + } + } + ++ + dss_init() + { + unsigned int i; +@@ -586,6 +588,7 @@ dss_init() + udelay(1000); + + } ++#endif + + /******************************************************* + * Routine: misc_init_r +@@ -618,8 +621,10 @@ int misc_init_r(void) + *((uint *) 0x49058094) = 0x00000506; + *((uint *) 0x49056094) = 0xF060F000; + ++#if 0 + dss_init(); + audio_init(); ++#endif + + return (0); + } diff --git a/packages/u-boot/u-boot-omap3beagleboard-1.1.4/env.patch b/packages/u-boot/u-boot-omap3beagleboard-1.1.4/env.patch new file mode 100644 index 0000000..582a6d6 --- /dev/null +++ b/packages/u-boot/u-boot-omap3beagleboard-1.1.4/env.patch @@ -0,0 +1,13 @@ +--- u-boot.orig/include/configs/omap3530beagle.h ++++ u-boot/include/configs/omap3530beagle.h +@@ -261,8 +261,8 @@ + #define CFG_ENV_IS_IN_NAND 1 + #define CFG_ENV_IS_IN_ONENAND 1 + #define CFG_ENV_IS_IN_FLASH 1 +-#define ONENAND_ENV_OFFSET 0xc0000 /* environment starts here */ +-#define SMNAND_ENV_OFFSET 0xc0000 /* environment starts here */ ++#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ ++#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + + #define CFG_ENV_SECT_SIZE boot_flash_sec + #define CFG_ENV_OFFSET boot_flash_off diff --git a/packages/u-boot/u-boot-omap3beagleboard-1.1.4/name.patch b/packages/u-boot/u-boot-omap3beagleboard-1.1.4/name.patch new file mode 100644 index 0000000..b854e3d --- /dev/null +++ b/packages/u-boot/u-boot-omap3beagleboard-1.1.4/name.patch @@ -0,0 +1,13 @@ +--- u-boot/Makefile-orig 2008-05-29 14:00:30.000000000 -0700 ++++ u-boot/Makefile 2008-05-29 13:59:13.000000000 -0700 +@@ -1823,8 +1823,8 @@ omap2430sdp_config : unconfig + omap3430sdp_config : unconfig + @./mkconfig $(@:_config=) arm omap3 omap3430sdp + +-omap3530beagle_config : unconfig +- @./mkconfig $(@:_config=) arm omap3 omap3530beagle ++beagleboard_config : unconfig ++ @./mkconfig omap3530beagle arm omap3 omap3530beagle + + #======================================================================== + # i386 diff --git a/packages/u-boot/u-boot-omap3beagleboard_1.1.4.bb b/packages/u-boot/u-boot-omap3beagleboard_1.1.4.bb new file mode 100644 index 0000000..e915e1e --- /dev/null +++ b/packages/u-boot/u-boot-omap3beagleboard_1.1.4.bb @@ -0,0 +1,16 @@ +require u-boot.inc +PR="r1" +DEFAULT_PREFERENCE = "-1" + +SRC_URI = "http://www.sakoman.net/omap3/u-boot.tar.gz \ + file://name.patch;patch=1 \ + file://armv7-a.patch;patch=1 \ + file://500mhz-l2enable.patch;patch=1 \ + file://disable-tone-logo.patch;patch=1 \ + file://env.patch;patch=1 \ + " + +S = "${WORKDIR}/u-boot" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + diff --git a/packages/u-boot/u-boot_git.bb b/packages/u-boot/u-boot_git.bb index a05422e..4518280 100644 --- a/packages/u-boot/u-boot_git.bb +++ b/packages/u-boot/u-boot_git.bb @@ -1,14 +1,19 @@ require u-boot.inc -PR="r1" -DEFAULT_PREFERENCE = "-1" +PR="r3" SRCREV_davinci-sffsdr = "4ce1e23b5e12283579828b3d23e8fd6e1328a7aa" +SRCREV_beagleboard = "8155efbd7ae9c65564ca98affe94631d612ae088" SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git " SRC_URI_sequoia = "git://www.denx.de/git/u-boot.git;protocol=git;tag=cf3b41e0c1111dbb865b6e34e9f3c3d3145a6093 " SRC_URI_append_davinci-sffsdr = " file://sffsdr-u-boot.patch;patch=1 " +SRC_URI_append_beagleboard = "file://base.patch;patch=1 \ + file://name.patch;patch=1 \ + file://armv7-a.patch;patch=1 \ + " + S = "${WORKDIR}/git" PACKAGE_ARCH = "${MACHINE_ARCH}" -- 2.7.4