lsppchd_pack_image() {
:
}
+
+IMAGE_POSTPROCESS_COMMAND += "lsppchd_pack_image; "
lsppchg_pack_image() {
:
}
+
+IMAGE_POSTPROCESS_COMMAND += "lsppchg_pack_image; "
rm -f $PADFILE
ls -l $OUTPUT
}
+
+IMAGE_POSTPROCESS_COMMAND += "n2100_pack_image; "
DEPENDS_prepend = "${@["libopie2 ", ""][(bb.data.getVar('PN', d, 1) == 'libopie2')]}"
-FILES_${PN}-dbg += " ${palmtopdir}/lib/.debug \
- ${palmtopdir}/bin/.debug \
- ${palmtopdir}/plugins/*/.debug "
-
# to be consistent, put all targets into workdir
# NOTE: leave one space at the end, other files are expecting that
EXTRA_QMAKEVARS_POST += "DESTDIR=${S} "
EXTRA_QMAKEVARS_POST += "${@["LIBS+=-lqpe ", ""][(bb.data.getVar('PN', d, 1) == 'libqpe-opie')]}"
DEPENDS_prepend = "${@["virtual/libqpe1 uicmoc-native ", ""][(bb.data.getVar('PN', d, 1) == 'libqpe-opie')]}"
-FILES_${PN} = "${palmtopdir}"
+PACKAGES = "${PN}-dbg ${PN}-dev ${PN} ${PN}-doc ${PN}-locale"
+FILES_${PN} = " ${palmtopdir} "
+FILES_${PN}-dev += " ${palmtopdir}/lib/lib*.so "
+FILES_${PN}-dbg += " ${palmtopdir}/lib/.debug \
+ ${palmtopdir}/bin/.debug \
+ ${palmtopdir}/plugins/*/.debug "
rm -f $PADFILE
ls -l $OUTPUT
}
+
+IMAGE_POSTPROCESS_COMMAND += "turbostation_pack_image; "
-#
-# FooNAS distribution - a NAS-centric distribution
-# based on openprotium
-#
-
+#@--------------------------------------------------------------------
+#@TYPE: Distribution
+#@NAME: foonas <http://www.foonas.org>
+#@DESCRIPTION: A nas-centric distribution
+#@MAINTAINER: Øyvind Repvik <repvik@foonas.org>
+#@--------------------------------------------------------------------
+
+FOONAS_MODE ?= "glibc"
+ANGSTROM_MODE = ${FOONAS_MODE}
+require conf/distro/angstrom-2007.1.conf
+
+DISTRO = "foonas"
DISTRO_NAME = "foonas"
+DISTRO_VERSION = "1.0-dev"
+DISTRO_REVISION = "1"
+DISTRO_TYPE = "debug"
-# This is only changed for a release
-DISTRO_VERSION = ".dev-snapshot-${SRCDATE}"
-DISTRO_TYPE = "alpha"
-# These should be merged once the bogofeed change has been committed.
-FEED_URIS = "foonas-packages##http://ipkg.foonas.org/${MACHINE}/cross-${FOONAS_MODE}/1.0-dev/packages"
-FEED_URIS += "foonas-kernel##http://ipkg.foonas.org/${MACHINE}/cross-${FOONAS_MODE}/1.0-dev/kernel"
+DISTRO_FEATURES = "uboot redboot"
+DISTRO_FEATURES_n2100 += "raid"
+DISTRO_FEATURES_storcenter += "raid"
+DISTRO_FEATURES_lsppchd += "raid"
+DISTRO_FEATURES_lsppchg += "raid"
+ENABLE_BINARY_LOCALE_GENERATION = "0"
HOTPLUG = "udev"
-# Various defines for Thecus N2100
-FOONAS_KERNEL_n2100 = "kernel-module-ext2 kernel-module-usb-storage"
-FOONAS_SUPPORT_n2100 += "fis"
-BOOTSTRAP_EXTRA_RDEPENDS_n2100 = "udev mdadm"
+# No room for debug apps on an NSLU2.
+DEBUG_APPS = ""
+
+FEED_URIS = "foonas##http://ipkg.foonas.org/${MACHINE}/cross-${FOONAS_MODE}/1.0-dev/"
IMAGE_PREPROCESS_COMMAND += "sed -i -es,^id:5:initdefault:,id:3:initdefault:, ${IMAGE_ROOTFS}/etc/inittab;"
IMAGE_PREPROCESS_COMMAND += "sed -i -es,^root::0,root:BTMzOOAQfESg6:0, ${IMAGE_ROOTFS}/etc/passwd;"
IMAGE_PREPROCESS_COMMAND += "sed -i -es,^VERBOSE=no,VERBOSE=very, ${IMAGE_ROOTFS}/etc/default/rcS;"
+IMAGE_PREPROCESS_COMMAND += "rm -f ${IMAGE_ROOTFS}/boot/*"
+IMAGE_PREPROCESS_COMMAND += "rm -f ${IMAGE_ROOTFS}/usr/lib/ipkg/lists/*"
+IMAGE_POSTPROCESS_COMMAND += "${MACHINE}_pack_image;"
+IMAGE_DEVICE_TABLE = "${@bb.which(bb.data.getVar('BBPATH', d, 1), 'files/device_table-slugos.txt')}"
-FOONAS_DEVICE_TABLE = "${@bb.which(bb.data.getVar('BBPATH', d, 1), 'files/device_table-slugos.txt')}"
-
-# Various defines for QNAP Turbostation
-FOONAS_KERNEL_turbostation = "kernel-module-ext3 kernel-module-minix \
- kernel-module-usb-storage"
-FOONAS_SUPPORT_turbostation += "uboot-utils"
-BOOTSTRAP_EXTRA_RDEPENDS_turbostation = "udev mdadm"
-
-# Various defines for Linkstations
-FOONAS_KERNEL_lsppchg = "kernel-module-dm-mod kernel-module-raid1 \
- kernel-module-raid0 kernel-module-raid456 \
- kernel-module-multipath"
-FOONAS_KERNEL_lsppchd = "${FOONAS_KERNEL_lsppchg}"
-FOONAS_SUPPORT_lsppchd = "uboot-utils dtc"
-FOONAS_SUPPORT_lsppchg = ${FOONAS_SUPPORT_lsppchd}
-IMAGE_FSTYPES_lsppchd = "tar.gz"
-IMAGE_FSTYPES_lsppchg = ${IMAGE_FSTYPES_lsppchd}
-
-FOONAS_KERNEL_storcenter = "kernel-module-dummy \
- kernel-module-af-packet "
-FOONAS_SUPPORT_storcenter = "uboot-utils"
-
-IMAGE_POSTPROCESS_COMMAND += '${MACHINE}_pack_image;'
+require conf/distro/include/sane-srcdates.inc
+PREFERRED_VERSION_openlink = "svn"
+PREFERRED_VERSION_dtc = "20070216"
+PREFERRED_VERSION_dtc-native = "20070216"
-#
-# Naming schemes
-#
-INHERIT += "debian"
+# Various defines for QNAP Turbostation
+#FOONAS_KERNEL_turbostation = "kernel-module-ext3 kernel-module-minix \
+# kernel-module-usb-storage"
+#FOONAS_SUPPORT_turbostation += "uboot-utils"
+#BOOTSTRAP_EXTRA_RDEPENDS_turbostation = "udev mdadm"
#
-# Packaging and output format
+# Various defines for Linkstations
+#FOONAS_KERNEL_lsppchg = "kernel-module-dm-mod kernel-module-raid1 \
+# kernel-module-raid0 kernel-module-raid456 \
+# kernel-module-multipath"
+#FOONAS_KERNEL_lsppchd = "${FOONAS_KERNEL_lsppchg}"
+#FOONAS_SUPPORT_lsppchd = "uboot-utils dtc"
+#FOONAS_SUPPORT_lsppchg = ${FOONAS_SUPPORT_lsppchd}
#
+#FOONAS_KERNEL_storcenter = "kernel-module-dummy \
+# kernel-module-af-packet "
-INHERIT += "package_ipk"
-IMAGE_BASENAME = "foonas"
-
-require conf/distro/include/sane-srcdates.inc
-require conf/distro/include/foonas.inc
+++ /dev/null
-# glibc:
-PREFERRED_PROVIDER_virtual/libiconv ?= "glibc"
-PREFERRED_PROVIDER_virtual/libintl ?= "glibc"
-PREFERRED_PROVIDER_virtual/libc ?= "glibc"
-
-TARGET_OS = "linux${@['','-gnueabi'][bb.data.getVar('TARGET_ARCH',d,1) in ['arm', 'armeb']]}"
-
-#mess with compiler flags to use -Os instead of -O2
-#Please see http://free-electrons.com/doc/embedded_linux_optimizations/img47.html for some more info
-# perl has some problems, see http://bugs.openembedded.org/show_bug.cgi?id=1616
-
-FULL_OPTIMIZATION = "-fexpensive-optimizations -fomit-frame-pointer -frename-registers -Os"
-FULL_OPTIMIZATION_pn-perl = "-fexpensive-optimizations -fomit-frame-pointer -frename-registers -O1"
-
-BUILD_OPTIMIZATION = "-Os"
-BUILD_OPTIMIZATION_pn-perl = "-O1"
-
-CXXFLAGS += "-fvisibility-inlines-hidden"
-
-PREFERRED_VERSION_linux-libc-headers ?= "2.6.18"
-GLIBC_ADDONS ?= "ports,nptl,libidn"
-GLIBC_EXTRA_OECONF = "--with-tls"
-
+++ /dev/null
-# uclibc:
-#fix some iconv issues, needs to be adjusted when doing uclibc builds
-PREFERRED_PROVIDER_virtual/libc = "uclibc"
-PREFERRED_PROVIDER_virtual/libiconv ?= "libiconv"
-PREFERRED_PROVIDER_virtual/libintl ?= "gettext"
-
-USE_NLS ?= "no"
-
-TARGET_OS = "linux${@['-uclibc','-uclibcgnueabi'][bb.data.getVar('TARGET_ARCH',d,1) in ['arm', 'armeb']]}"
-
-#mess with compiler flags to use -Os instead of -O2
-#Please see http://free-electrons.com/doc/embedded_linux_optimizations/img47.html for some more info
-FULL_OPTIMIZATION = "-fexpensive-optimizations -fomit-frame-pointer -frename-registers -Os"
-BUILD_OPTIMIZATION = "-Os"
-CXXFLAGS += "-fvisibility-inlines-hidden"
-
-SRCDATE_uclibc ?= "20070320"
-PREFERRED_VERSION_uclibc ?= "0.9.28+svn${SRCDATE_uclibc}"
-PREFERRED_VERSION_uclibc-initial ?= "0.9.28+svn${SRCDATE_uclibc}"
-
-PREFERRED_VERSION_linux-libc-headers = "2.6.18"
-#PREFERRED_VERSION_linux-libc-headers_powerpc = "2.6.15.99"
\ No newline at end of file
+++ /dev/null
-#
-# binutils and compilers
-#
-# Can be "glibc" and "uclibc"
-FOONAS_MODE ?= "glibc"
-
-#DEPLOY_DIR = "${TMPDIR}/deploy/${FOONAS_MODE}"
-require conf/distro/include/foonas-${FOONAS_MODE}.inc
-
-INHERIT += "package_ipk debian sanity devshell"
-
-#Generate locales on the buildsystem instead of on the target. Speeds up first boot, set to "1" to enable
-PREFERRED_PROVIDER_qemu-native = "qemu-native"
-ENABLE_BINARY_LOCALE_GENERATION ?= "0"
-
-PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}libc-for-gcc = "glibc-intermediate"
-PREFERRED_PROVIDER_virtual/arm-foonas-linux-gnueabi-libc-for-gcc = "glibc-intermediate"
-PREFERRED_PROVIDER_virtual/arm-linux-libc-for-gcc = "glibc-intermediate"
-PREFERRED_PROVIDER_virtual/powerpc-foonas-linux-libc-for-gcc = "glibc-intermediate"
-
-# not used yet
-#PREFERRED_PROVIDER_virtual/armeb-linux-libc-for-gcc = "glibc-intermediate"
-#PREFERRED_PROVIDER_virtual/armeb-foonas-linux-gnueabi-libc-for-gcc = "glibc-intermediate"
-#PREFERRED_PROVIDER_virtual/mipsel-foonas-linux-libc-for-gcc = "glibc-intermediate"
-
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc:gcc-cross"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}g++:gcc-cross"
-#conflict between this and the last below.
-#PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}libc-for-gcc:glibc"
-# Select 2.6 versions of the depmod support
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross"
-PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}libc-for-gcc:glibc-intermediate"
-
-PREFERRED_PROVIDER_virtual/libx11 = "libx11"
-
-PREFERRED_PROVIDER_virtual/db = "db"
-PREFERRED_PROVIDER_virtual/db-native = "db-native"
-
-PREFERRED_VERSION_binutils = "2.17.50.0.12"
-PREFERRED_VERSION_binutils-cross = "2.17.50.0.12"
-
-PREFERRED_VERSION_gcc = "4.1.1"
-PREFERRED_VERSION_gcc-cross = "4.1.1"
-PREFERRED_VERSION_gcc-cross-sdk ?= "4.1.1"
-PREFERRED_VERSION_gcc-cross-initial = "4.1.1"
-
-PREFERRED_VERSION_glibc = "2.5"
-PREFERRED_VERSION_glibc-intermediate = "2.5"
-PREFERRED_VERSION_glibc-initial = "2.5"
-
-PREFERRED_VERSION_openlink = "svn"
-PREFERRED_VERSION_dtc = "20070216"
-PREFERRED_VERSION_dtc-native = "20070216"
QTE_VERSION ?= "2.3.10"
PALMTOP_USE_MULTITHREADED_QT ?= "yes"
-OPIE_SRCDATE ?= "20070308"
+OPIE_SRCDATE ?= "20070328"
OPIE_VERSION ?= "1.2.2+cvs${OPIE_SRCDATE}"
OPIE_CVS_PV ?= "1.2.2+cvs${OPIE_SRCDATE}"
SRCDATE_matchbox-wm ?= "20060612"
SRCDATE_libmatchbox ?= "20060612"
SRCDATE_libfakekey ?= "20051101"
-SRCDATE_psplash ?= "20061207"
+SRCDATE_psplash ?= "20070330"
SRCDATE_web ?= "20060613"
SRCDATE_zaurusd ?= "20060628"
PREFERRED_VERSION_hostap-utils ?= "0.4.7"
PREFERRED_VERSION_hostap-modules ?= "0.4.7"
+PREFERRED_VERSION_gtk-engines ?= "2.6.5"
+
#
# We do not use qte-mt to keep compatibility with older OZ
#
+++ /dev/null
-#@TYPE: Machine configuration
-#@Name: Buffalo PPC Linkstations
-#@DESCRIPTION: Generic Machine configuration for ppc based linkstations
-
-
-TARGET_ARCH = "powerpc"
-PACKAGE_EXTRA_ARCHS = "ppc ppc603e"
-MACHINE_FEATURES = "kernel26 usbhost ext2"
-TARGET_FPU = "hard"
-
-USE_DEVFS = "0"
-
-BOOTSTRAP_EXTRA_RDEPENDS = "udev module-init-tools kernel-modules"
-FEED_URIS = "openlink##http://ipkg.linkstationwiki.net/2007.1/powerpc/"
-PREFERRED_PROVIDER_virtual/kernel = "linux-linkstationppc"
-
-#don't try to access tty1
-USE_VT = "0"
-
-HOTPLUG = "udev"
-udevdir = "/dev"
-
-IMAGE_DEVICE_TABLES = "files/device_table-slugos.txt"
-
-#tune for the MPC5200B cpu
-require conf/machine/include/tune-ppc603e.conf
--- /dev/null
+#@TYPE: Machine configuration
+#@Name: Buffalo PPC Linkstations
+#@DESCRIPTION: Generic Machine configuration for ppc based linkstations
+
+
+TARGET_ARCH = "powerpc"
+PACKAGE_EXTRA_ARCHS = "ppc ppc603e"
+MACHINE_FEATURES = "kernel26 usbhost ext2 pci uboot"
+TARGET_FPU = "hard"
+MACHINE_TASK_PROVIDER = "task-base"
+
+USE_DEVFS = "0"
+
+BOOTSTRAP_EXTRA_RDEPENDS = "udev module-init-tools kernel-modules"
+PREFERRED_PROVIDER_virtual/kernel = "linux-linkstationppc"
+
+#don't try to access tty1
+USE_VT = "0"
+
+HOTPLUG = "udev"
+udevdir = "/dev"
+
+IMAGE_FSTYPES = "tar.gz"
+
+#tune for the MPC5200B cpu
+require conf/machine/include/tune-ppc603e.conf
#@TYPE: Machine
#@NAME: HD Linkstation
#@DESCRIPTION: Machine configuration for the Buffalo Linkstation HD
-
UBOOT_MACHINE = "linkstation_HDLAN"
IMAGE_FSTYPES = "tar.gz"
-
-require conf/machine/include/linkstationppc.conf
+require conf/machine/include/lsppc.conf
\ No newline at end of file
#@TYPE: Machine
#@NAME: HG Linkstation
#@DESCRIPTION: Machine configuration for the Buffalo Linkstation HG
-
UBOOT_MACHINE = "linkstation_HGLAN"
IMAGE_FSTYPES = "tar.gz"
-
-require conf/machine/include/linkstationppc.conf
+require conf/machine/include/lsppc.conf
\ No newline at end of file
TARGET_FPU = "soft"
PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te"
+INHERIT += "n2100-image"
+
SERIAL_CONSOLE="115200 console"
USE_VT="0"
MODUTILS=26
-MACHINE_FEATURES= "kernel26 usbhost pci ext2"
+MACHINE_FEATURES= "kernel26 usbhost pci ext2 redboot"
PREFERRED_PROVIDER_virtual/kernel = "linux"
PREFERRED_VERSION_linux = "2.6.20"
MACHINE_TASK_PROVIDER = "task-base"
TARGET_OS = "linux"
TARGET_FPU = "hard"
PACKAGE_EXTRA_ARCHS = "ppc ppc603e"
-MACHINE_TASK_PROVIDER = "task-base"
+
+INHERIT += "storcenter-image"
# terminal specs - console, but no other ports
SERIAL_CONSOLE="115200 console"
USE_VT="0"
MODUTILS=26
-MACHINE_FEATURES= "kernel26 usbhost pci ext2"
+MACHINE_FEATURES= "kernel26 usbhost pci ext2 uboot"
PREFERRED_PROVIDER_virtual/kernel = "linux-storcenter"
MACHINE_TASK_PROVIDER = "task-base"
TARGET_OS = "linux"
TARGET_FPU = "hard"
PACKAGE_EXTRA_ARCHS = "ppc ppc603e"
-MACHINE_TASK_PROVIDER = "task-base"
+
+INHERIT += "turbostation-image"
# terminal specs - console, but no other ports
SERIAL_CONSOLE="115200 console"
USE_VT="0"
MODUTILS=26
-MACHINE_FEATURES= "kernel26 usbhost pci ext2"
+MACHINE_FEATURES = "kernel26 usbhost pci ext2 uboot"
+UBOOT_MACHINE = "qnap_config"
+PREFERRED_VERSION_u-boot = "1.2.0"
+
PREFERRED_PROVIDER_virtual/kernel = "linux-turbostation"
MACHINE_TASK_PROVIDER = "task-base"
SECTION = "network"
PRIORITY = "optional"
LICENSE = "GPL"
-PR="r1"
+PR="r2"
DEPENDS = "expat libdaemon dbus glib-2.0"
RRECOMMENDS = "libnss-mdns"
if [ "x$D" != "x" ]; then
exit 1
fi
- grep avahi /etc/group || addgroup avahi
- grep avahi /etc/passwd || adduser --disabled-password --system --home /var/run/avahi-daemon --no-create-home avahi --ingroup avahi -g Avahi
+ grep "^avahi:" /etc/group > /dev/null || addgroup avahi
+ grep "^avahi:" /etc/passwd > /dev/null || adduser --disabled-password --system --home /var/run/avahi-daemon --no-create-home avahi --ingroup avahi -g Avahi
DBUSPID=`pidof dbus-daemon`
if [ "x$D" != "x" ]; then
exit 1
fi
- grep avahi-autoipd /etc/group || addgroup avahi-autoipd
- grep avahi-autoipd /etc/passwd || adduser --disabled-password --system --home /var/lib/avahi-autoipd --no-create-home avahi-autoipd --ingroup avahi-autoipd -g "Avahi autoip daemon"
+ grep "^avahi-autoipd:" /etc/group > /dev/null || addgroup avahi-autoipd
+ grep "^avahi-autoipd:" /etc/passwd > /dev/null || adduser --disabled-password --system --home /var/lib/avahi-autoipd --no-create-home avahi-autoipd --ingroup avahi-autoipd -g "Avahi autoip daemon"
}
pkg_postrm_avahi-daemon () {
+++ /dev/null
-SECTION = "x11/base"
-LICENSE = "MIT"
-SRC_URI = "${FREEDESKTOP_CVS}/dri;module=drm;method=pserver"
-
-PV = "0.0+cvs${SRCDATE}"
-PR = "r3"
-
-S = "${WORKDIR}/drm"
-
-inherit autotools pkgconfig
-
-do_compile() {
- oe_runmake -C libdrm
-}
-
-do_stage() {
- autotools_stage_all
-}
+++ /dev/null
-#!/bin/sh
-# validate /etc/fstab against the current UUID list in
-# /etc/uuid_by_partition
-#
-. /etc/default/functions
-pfile=/etc/uuid_by_partition
-
-#
-# use debug to find out what is going on
-test "$1" = start -o "$1" = debug || exit 0
-
-#
-# obtain the current list of parititions with UUIDs
-newlist="$(uuid_by_partition)"
-
-if test -r "$pfile"
-then
- # read the old list
- oldlist="$(cat "$pfile")"
- #
- # if it hasn't changed nothing need be done
- test "$newlist" = "$oldlist" && exit 0
- #
- # it has changed, but this only matters if
- # a previously existing uuid has moved, build
- # a list of old device vs new device for every
- # uuid which has moved
- changedlist="$(
- { echo "$oldlist"
- echo "$newlist"
- } | awk 'device[$2] == ""{device[$2] = $1}
- device[$2] != $1{print device[$2], $1}')"
-
- if test -n "$changedlist"
- then
- # at least one partition has moved, scan the
- # current fstab to see if it has a reference
- # to this partition
- changedfstab="$(
- { echo "$changedlist"
- echo '#fstab'
- cat /etc/fstab
- } | awk 'BEGIN{list=1}
- list==1 && $0=="#fstab"{list=0; continue}
- list==1{new[$1] = $2; continue}
- new[$1] != ""{print $1, new[$1]}')"
-
- # if this list is not empty edit the fstab
- if test -n "$changedfstab"
- then
- rm -f /tmp/fstab.$$
- # if the edit fails then do not overwrite the old
- # partition list - just exit with an error
- { echo "$changedlist"
- echo '#fstab'
- cat /etc/fstab
- } | awk 'BEGIN{list=1}
- list==1 && $0=="#fstab"{list=0; continue}
- list==1{new[$1] = $2; continue}
- new[$1] != ""{$1 = new[$1]}
- {print}' >/tmp/fstab.$$ || {
- if test "$1" = start
- then
- logger -s "/etc/init.d/fixfstab: /tmp/fstab.$$: awk failed"
- else
- echo "debug: awk script failed with:" >&2
- echo "$changedlist" >&2
- echo "output in /tmp/fstab.$$" >&2
- fi
- exit 1
- }
-
- if test "$1" = start
- then
- mv /tmp/fstab.$$ /etc/fstab || {
- logger -s "/etc/init.d/fixfstab: /tmp/fstab.$$: update failed"
- exit 1
- }
- else
- echo "debug: fstab changed:"
- diff -u /etc/fstab /tmp/fstab.$$
- fi
- fi
- fi
-fi
-
-# write the new list to the file, only if we
-# are doing something...
-test "$1" = start && echo "$newlist" >"$pfile"
-
-exit 0
+++ /dev/null
-#!/bin/sh
-
-. /etc/default/modulefunctions # Load module loading logic
-
-loadnetmods
-
-loaddiskmods
-
-loadmiscmods
-
-exit 0
+++ /dev/null
-#!/bin/sh
-# Run to remove /.recovery if the boot seems to have succeeded
-test -e /.recovery && rm -f /.recovery
-exit 0
+++ /dev/null
-#!/bin/sh
-# This script is run once when the system first boots. Its sole
-# purpose is to create /etc/default/sysconf (the overall system
-# configuration file) and other files derived from this.
-#
-# The script runs immediately after S10checkroot.sh - this is the
-# point at which the rootfs will be mounted rw even if the kernel
-# booted with it ro.
-#
-# rm or mv the file (/etc/default/sysconf) to recreate it, run this
-# script with the reload option to overwrite the system files. The
-# configuration files described in sysconf_reload (in
-# /sbin/sysconf) will be overwritten on reload.
-#
-# start: standard startup, do a complete (auto) restore if necessary
-# reinit: always do a complete auto restore
-# reload: just reload sysconf (no config files!)
-#
-# /etc/default/functions contains useful utility functions - it's
-# in a separate file so that it can be loaded by any script
-. /etc/default/functions
-load_functions sysconf || exit 1
-#
-case "$1" in
-start) test -s /etc/default/sysconf || {
- if sysconf_read
- then
- if sysconf_valid
- then
- sysconf_restore auto
- else
- sysconf_reload
- fi
- else
- sysconf_default
- sysconf_reload
- fi
- };;
-
-reload) test -s /etc/default/sysconf || sysconf_read || sysconf_default
- sysconf_reload;;
-
-reinit) sysconf_restore auto;;
-
-*) ;;
-esac
+++ /dev/null
-#!/bin/sh
-#
-# Invoke the syslog startup if the configuration
-# uses (only) 'buffer' as the DESTINATION
-DESTINATION=
-test -f /etc/syslog.conf && . /etc/syslog.conf
-doit=
-
-for d in $DESTINATION
-do
- case "$d" in
- buffer) doit=1;;
- file) exit 0;;
- remote) exit 0;;
- *) echo "/etc/syslog.conf: $d: unknown destination" >&2
- exit 1;;
- esac
-done
-
-test -n "$doit" -a -x /etc/init.d/syslog &&
- exec /etc/init.d/syslog "$@"
-
-exit 0
+++ /dev/null
-#!/bin/sh
-#
-# Invoke the syslog startup if the configuration
-# uses 'file' (and, optionally, buffer) as the DESTINATION
-DESTINATION=
-test -f /etc/syslog.conf && . /etc/syslog.conf
-doit=
-
-for d in $DESTINATION
-do
- case "$d" in
- buffer) :;;
- file) doit=1;;
- remote) exit 0;;
- *) echo "/etc/syslog.conf: $d: unknown destination" >&2
- exit 1;;
- esac
-done
-
-test -n "$doit" -a -x /etc/init.d/syslog &&
- exec /etc/init.d/syslog "$@"
-
-exit 0
+++ /dev/null
-#!/bin/sh
-#
-# Invoke the syslog startup if the configuration
-# uses 'remote', or doesn't use 'buffer' or 'file'
-DESTINATION=
-test -f /etc/syslog.conf && . /etc/syslog.conf
-doit=
-doneit=
-
-for d in $DESTINATION
-do
- case "$d" in
- buffer) doneit=1;;
- file) doneit=1;;
- remote) doit=1;;
- *) doit=1
- echo "/etc/syslog.conf: $d: unknown destination" >&2
- exit 1;;
- esac
-done
-
-# One of doneit or doit is set unless the DESTINATION value
-# is empty (which is probably an error), let syslog handle
-# the error.
-test \( -n "$doit" -o -z "$doneit" \) -a -x /etc/init.d/syslog &&
- exec /etc/init.d/syslog "$@"
-
-exit 0
+++ /dev/null
-#!/bin/sh
-#
-# umount /mnt, which is where the initrd ends up mounted
-# if the directory /initrd is not present, if this fails
-# then the /initrd is mounted and we want to remount that
-# ro - this works round the shutdown -r hang problem
-. /etc/default/functions
-#
-# if we are turnup'ed to disk, then just unmount the initrd all together
-#
-if [ -e /initrd/dev/.devfsd ]; then
- [ "$VERBOSE" = "very" ] && echo "Unmounting initrd..."
- umount /initrd/dev
- umount /initrd
- exit 0
-fi
-
-while read device directory remainder
-do
- case "$directory" in
- /mnt) echo "InitRD: unmount initrd on /mnt" >&2
- umount /mnt;;
- /initrd)# need the device for a remount
- ffspart=Flashdisk
- ffsdev="$(mtblockdev $ffspart)"
- echo "InitRD: remount $ffdev read-only on /initrd" >&2
- if test -n "$ffsdev" -a -b "$ffsdev"
- then
- mount -o remount,ro "$ffsdev" /initrd
- else
- echo "Flashdisk: $ffsdev: flash device not found" >&2
- fi;;
- esac
-done </proc/mounts
--- /dev/null
+Index: gammu-1.10.0/cfg/Makefile.glo
+===================================================================
+--- gammu-1.10.0.orig/cfg/Makefile.glo 2007-03-30 17:55:18.000000000 +0200
++++ gammu-1.10.0/cfg/Makefile.glo 2007-03-30 17:55:46.000000000 +0200
+@@ -152,7 +152,7 @@
+
+ $(TOPDIR)/gammu/gammu-shared: $(COMMON) $(GAMMU) $(TOPDIR)/common/$(LIBGAMMU_FULLNAME)
+ @echo Linking gammu-shared
+- @$(CC) -L$(TOPDIR)/common -lGammu $(GAMMU_CFLAGS) $(GAMMU_LIBS) $(SMSD_LIBS) $(GAMMU) -o $(TOPDIR)/gammu/gammu-shared
++ @$(CC) -L$(TOPDIR)/common -lGammu $(LDLIBS) $(GAMMU_CFLAGS) $(GAMMU_LIBS) $(SMSD_LIBS) $(GAMMU) -o $(TOPDIR)/gammu/gammu-shared
+
+ shared: $(TOPDIR)/common/$(LIBGAMMU_FULLNAME) $(TOPDIR)/common/$(LIBGAMMU_STATIC) $(TOPDIR)/gammu/gammu-shared
+
+++ /dev/null
-DESCRIPTION = "GNU All Mobile Managment Utilities"
-SECTION = "console/network"
-DEPENDS = "bluez-libs"
-LICENSE = "GPL"
-HOMEPAGE = "http://mwiacek.com/gsm/soft/gammu.html"
-AUTHOR = "Marcin Wiacek <marcin@mwiacek.com>"
-
-SRC_URI = "http://www.mwiacek.com/zips/gsm/gammu/stable/1_0x/gammu-${PV}.tar.gz "
-
-EXTRA_OECONF = "--disable-mysql"
-
-inherit autotools
-
-do_compile () {
- oe_runmake shared
-}
-
-do_stage() {
- install -d ${STAGING_INCDIR}/gammu/misc ${STAGING_INCDIR}/gammu/misc/coding \
- ${STAGING_INCDIR}/gammu/phone ${STAGING_INCDIR}/gammu/phone/at \
- ${STAGING_INCDIR}/gammu/phone/obex ${STAGING_INCDIR}/gammu/phone/nokia \
- ${STAGING_INCDIR}/gammu/phone/nokia/dct3 ${STAGING_INCDIR}/gammu/phone/nokia/dct4tiku \
- ${STAGING_INCDIR}/gammu/phone/symbian ${STAGING_INCDIR}/gammu/phone/alcatel \
- ${STAGING_INCDIR}/gammu/service ${STAGING_INCDIR}/gammu/service/sms \
- ${STAGING_INCDIR}/gammu/service/backup ${STAGING_INCDIR}/gammu/device \
- ${STAGING_INCDIR}/gammu/device/irda ${STAGING_INCDIR}/gammu/device/bluetoth \
- ${STAGING_INCDIR}/gammu/device/serial ${STAGING_INCDIR}/gammu/protocol \
- ${STAGING_INCDIR}/gammu/protocol/at ${STAGING_INCDIR}/gammu/protocol/obex \
- ${STAGING_INCDIR}/gammu/protocol/nokia ${STAGING_INCDIR}/gammu/protocol/symbian \
- ${STAGING_INCDIR}/gammu/protocol/alcatel
-
- oe_libinstall -so -C common libGammu ${STAGING_LIBDIR}
-
- install -m 0644 common/*.h ${STAGING_INCDIR}/gammu/
- install -m 0644 common/misc/*.h ${STAGING_INCDIR}/gammu/misc
- install -m 0644 common/misc/coding/*.h ${STAGING_INCDIR}/gammu/misc/coding
- install -m 0644 common/phone/*.h ${STAGING_INCDIR}/gammu/phone
- install -m 0644 common/phone/at/*.h ${STAGING_INCDIR}/gammu/phone/at
- install -m 0644 common/phone/obex/*.h ${STAGING_INCDIR}/gammu/phone/obex
- install -m 0644 common/phone/nokia/*.h ${STAGING_INCDIR}/gammu/phone/nokia
- install -m 0644 common/phone/nokia/dct3/*.h ${STAGING_INCDIR}/gammu/phone/nokia/dct3
- install -m 0644 common/phone/nokia/dct4tiku/*.h ${STAGING_INCDIR}/gammu/phone/nokia/dct4tiku
- install -m 0644 common/phone/symbian/*.h ${STAGING_INCDIR}/gammu/phone/symbian
- install -m 0644 common/phone/alcatel/*.h ${STAGING_INCDIR}/gammu/phone/alcatel
- install -m 0644 common/service/*.h ${STAGING_INCDIR}/gammu/service
- install -m 0644 common/service/sms/*.h ${STAGING_INCDIR}/gammu/service/sms
- install -m 0644 common/service/backup/*.h ${STAGING_INCDIR}/gammu/service/backup
- install -m 0644 common/device/*.h ${STAGING_INCDIR}/gammu/device
- install -m 0644 common/device/irda/*.h ${STAGING_INCDIR}/gammu/device/irda
- install -m 0644 common/device/bluetoth/*.h ${STAGING_INCDIR}/gammu/device/bluetoth
- install -m 0644 common/device/serial/*.h ${STAGING_INCDIR}/gammu/device/serial
- install -m 0644 common/protocol/*.h ${STAGING_INCDIR}/gammu/protocol
- install -m 0644 common/protocol/at/*.h ${STAGING_INCDIR}/gammu/protocol/at
- install -m 0644 common/protocol/obex/*.h ${STAGING_INCDIR}/gammu/protocol/obex
- install -m 0644 common/protocol/nokia/*.h ${STAGING_INCDIR}/gammu/protocol/nokia
- install -m 0644 common/protocol/symbian/*.h ${STAGING_INCDIR}/gammu/protocol/symbian
- install -m 0644 common/protocol/alcatel/*.h ${STAGING_INCDIR}/gammu/protocol/alcatel
-}
-
-do_install () {
- oe_runmake 'DESTDIR=${D}' installshared
-}
-
-PACKAGES =+ "libgammu"
-
-FILES_${PN} = "${bindir}/gammu"
-FILES_libgammu = "${libdir}/libGammu.so*"
-
-PACKAGES_DYNAMIC = "gammu-locale-*"
-
-python populate_packages_prepend () {
- help_dir = bb.data.expand('${datadir}/gammu/', d)
-
- do_split_packages(d, help_dir, file_regex='^gammu_(.*)\.txt$', output_pattern='gammu-locale-%s', description='%s translation for Gammu')
-}
--- /dev/null
+DESCRIPTION = "GNU All Mobile Managment Utilities"
+SECTION = "console/network"
+DEPENDS = "bluez-libs"
+LICENSE = "GPL"
+HOMEPAGE = "http://www.gammu.org/"
+
+SRC_URI = "http://dl.cihar.com/gammu/releases/gammu-${PV}.tar.bz2 \
+ file://ldflags-again.patch;patch=1"
+
+EXTRA_OECONF = "--disable-mysql --with-bluedir=${STAGING_DIR}"
+
+EXTRA_LDFLAGS = "-lbluetooth2"
+
+inherit autotools
+
+do_compile () {
+ oe_runmake shared LDFLAGS='-L${STAGING_LIBDIR} -lbluetooth'
+}
+
+do_stage() {
+ install -d ${STAGING_INCDIR}/gammu/misc ${STAGING_INCDIR}/gammu/misc/coding \
+ ${STAGING_INCDIR}/gammu/phone ${STAGING_INCDIR}/gammu/phone/at \
+ ${STAGING_INCDIR}/gammu/phone/obex ${STAGING_INCDIR}/gammu/phone/nokia \
+ ${STAGING_INCDIR}/gammu/phone/nokia/dct3 ${STAGING_INCDIR}/gammu/phone/nokia/dct4s40 \
+ ${STAGING_INCDIR}/gammu/phone/symbian ${STAGING_INCDIR}/gammu/phone/alcatel \
+ ${STAGING_INCDIR}/gammu/service ${STAGING_INCDIR}/gammu/service/sms \
+ ${STAGING_INCDIR}/gammu/service/backup ${STAGING_INCDIR}/gammu/device \
+ ${STAGING_INCDIR}/gammu/device/irda ${STAGING_INCDIR}/gammu/device/bluetoth \
+ ${STAGING_INCDIR}/gammu/device/serial ${STAGING_INCDIR}/gammu/protocol \
+ ${STAGING_INCDIR}/gammu/protocol/at ${STAGING_INCDIR}/gammu/protocol/obex \
+ ${STAGING_INCDIR}/gammu/protocol/nokia ${STAGING_INCDIR}/gammu/protocol/symbian \
+ ${STAGING_INCDIR}/gammu/protocol/alcatel
+
+ oe_libinstall -so -C common libGammu ${STAGING_LIBDIR}
+
+ install -m 0644 common/*.h ${STAGING_INCDIR}/gammu/
+ install -m 0644 common/misc/*.h ${STAGING_INCDIR}/gammu/misc
+ install -m 0644 common/misc/coding/*.h ${STAGING_INCDIR}/gammu/misc/coding
+ install -m 0644 common/phone/*.h ${STAGING_INCDIR}/gammu/phone
+ install -m 0644 common/phone/at/*.h ${STAGING_INCDIR}/gammu/phone/at
+ install -m 0644 common/phone/obex/*.h ${STAGING_INCDIR}/gammu/phone/obex
+ install -m 0644 common/phone/nokia/*.h ${STAGING_INCDIR}/gammu/phone/nokia
+ install -m 0644 common/phone/nokia/dct3/*.h ${STAGING_INCDIR}/gammu/phone/nokia/dct3
+ install -m 0644 common/phone/nokia/dct4s40/*.h ${STAGING_INCDIR}/gammu/phone/nokia/dct4s40
+ install -m 0644 common/phone/symbian/*.h ${STAGING_INCDIR}/gammu/phone/symbian
+ install -m 0644 common/phone/alcatel/*.h ${STAGING_INCDIR}/gammu/phone/alcatel
+ install -m 0644 common/service/*.h ${STAGING_INCDIR}/gammu/service
+ install -m 0644 common/service/sms/*.h ${STAGING_INCDIR}/gammu/service/sms
+ install -m 0644 common/service/backup/*.h ${STAGING_INCDIR}/gammu/service/backup
+ install -m 0644 common/device/*.h ${STAGING_INCDIR}/gammu/device
+ install -m 0644 common/device/irda/*.h ${STAGING_INCDIR}/gammu/device/irda
+ install -m 0644 common/device/bluetoth/*.h ${STAGING_INCDIR}/gammu/device/bluetoth
+ install -m 0644 common/device/serial/*.h ${STAGING_INCDIR}/gammu/device/serial
+ install -m 0644 common/protocol/*.h ${STAGING_INCDIR}/gammu/protocol
+ install -m 0644 common/protocol/at/*.h ${STAGING_INCDIR}/gammu/protocol/at
+ install -m 0644 common/protocol/obex/*.h ${STAGING_INCDIR}/gammu/protocol/obex
+ install -m 0644 common/protocol/nokia/*.h ${STAGING_INCDIR}/gammu/protocol/nokia
+ install -m 0644 common/protocol/symbian/*.h ${STAGING_INCDIR}/gammu/protocol/symbian
+ install -m 0644 common/protocol/alcatel/*.h ${STAGING_INCDIR}/gammu/protocol/alcatel
+}
+
+do_install () {
+ oe_runmake 'DESTDIR=${D}' installshared
+}
+
+PACKAGES =+ "libgammu"
+
+FILES_${PN} = "${bindir}/gammu"
+FILES_libgammu = "${libdir}/libGammu.so*"
+
+PACKAGES_DYNAMIC = "gammu-locale-*"
+
+python populate_packages_prepend () {
+ help_dir = bb.data.expand('${datadir}/gammu/', d)
+
+ do_split_packages(d, help_dir, file_regex='^gammu_(.*)\.txt$', output_pattern='gammu-locale-%s', description='%s translation for Gammu')
+}
prog="gsmd"
start() {
- # FIXME add check whether GSM_POW is set at all, otherwise don't try to power on
- # Power on GSM device
-
# Hack for broken uboot and/or kernel on the neo1973
dmesg -n1
- if [ -e "${GSM_POW}" ]
+ if [ -n "${GSM_POW}" ]
then
- echo -n "Powering up GSM device..."
- echo "1" > ${GSM_POW}
- sleep 1
- echo "done"
- else
- echo "GSM device not found. Aborting startup"
- return false
+ if [ -e "${GSM_POW}" ]
+ then
+ echo -n "Powering up GSM device..."
+ echo "1" > ${GSM_POW}
+ sleep 1
+ echo "done"
+ else
+ echo "GSM device not found. Aborting startup"
+ return false
+ fi
fi
# Start daemons.
echo -n "Starting $prog: "
# gsmd This shell script configures for the gsmd init script.
-# If you must specify special options, uncomment and modify the next line
-GSMD_OPTS="-s 115200 -F"
+# Set line Discipline 17 (N_TIHTC), needs ldisc.patch-ed gsmd
+GSMD_OPTS="-s 115200 -F -D 17"
# If your GSM device needs to be powered up, uncomment and modify the next line
#GSM_POW="/sys/bus/platform/devices/gta01-pm-gsm.0/power_on"
SECTION = "libs/gsm"
PROVIDES += "gsmd"
PV = "0.0+svn${SRCDATE}"
-PR = "r7"
+PR = "r8"
SRC_URI = "svn://svn.openmoko.org/trunk/src/target;module=gsm;proto=http \
file://gsmd \
+++ /dev/null
-DESCRIPTION = "Foonas image"
-LICENSE = "GPL"
-PR = "r0"
-
-inherit image n2100-image turbostation-image lsppchg-image lsppchd-image storcenter-image
-
-DEPENDS = "${MACHINE_TASK_PROVIDER} makedevs-native mtd-utils-native"
-
-EXTRA_IMAGECMD_jffs2 += " --pad --eraseblock=${ERASEBLOCK_SIZE} -D ${FOONAS_DEVICE_TABLE}"
-IMAGE_LINGUAS = ""
-
-RDEPENDS = " \
- base-files base-passwd netbase \
- busybox initscripts foonas-init \
- update-modules sysvinit tinylogin \
- module-init-tools-depmod modutils-initscripts \
- ipkg-collateral ipkg ipkg-link \
- libgcc1 diffutils cpio findutils\
- dropbear e2fsprogs-blkid \
- mdadm hdparm mtd-utils udev \
- ${FOONAS_SUPPORT} \
- ${FOONAS_KERNEL} "
-
-PACKAGE_INSTALL = "${RDEPENDS}"
-
--- /dev/null
+DESCRIPTION = "Liboil is a library of simple functions that are optimized for various CPUs."
+HOMEPAGE = "http://liboil.freedesktop.org/"
+LICENSE = "various"
+
+SRC_URI = "http://liboil.freedesktop.org/download/${P}.tar.gz"
+
+inherit autotools pkgconfig
+
+do_stage() {
+ autotools_stage_all
+}
done
}
-PACKAGES = "libopiecore2 libopiedb2 libopiesecurity2 libopiemm2 libopienet2 libopiepim2 libopieui2 libopiebluez2"
+PACKAGES_prepend = " libopiecore2 libopiedb2 libopiesecurity2 libopiemm2 libopienet2 libopiepim2 libopieui2 libopiebluez2 "
DESCRIPTION_libopiecore2 = "Opie Development Platform 1.x Core Library"
-FILES_libopiecore2 = "${palmtopdir}/lib/libopiecore2.so*"
+FILES_libopiecore2 = "${palmtopdir}/lib/libopiecore2.so.*"
DESCRIPTION_libopiedb2 = "Opie Development Platform 1.x Database Library"
-FILES_libopiedb2 = "${palmtopdir}/lib/libopiedb2.so*"
+FILES_libopiedb2 = "${palmtopdir}/lib/libopiedb2.so.*"
DESCRIPTION_libopiemm2 = "Opie Development Platform 1.x Multimedia Library"
-FILES_libopiemm2 = "${palmtopdir}/lib/libopiemm2.so*"
+FILES_libopiemm2 = "${palmtopdir}/lib/libopiemm2.so.*"
DESCRIPTION_libopienet2 = "Opie Development Platform 1.x Network Library"
-FILES_libopienet2 = "${palmtopdir}/lib/libopienet2.so*"
+FILES_libopienet2 = "${palmtopdir}/lib/libopienet2.so.*"
DESCRIPTION_libopiepim2 = "Opie Development Platform 1.x PIM Library"
-FILES_libopiepim2 = "${palmtopdir}/lib/libopiepim2.so*"
+FILES_libopiepim2 = "${palmtopdir}/lib/libopiepim2.so.*"
DESCRIPTION_libopieui2 = "Opie Development Platform 1.x User Interface Library"
-FILES_libopieui2 = "${palmtopdir}/lib/libopieui2.so*"
+FILES_libopieui2 = "${palmtopdir}/lib/libopieui2.so.*"
DESCRIPTION_libopiesecurity2 = "Opie Development Platform 1.x Security Library"
-FILES_libopiesecurity2 = "${palmtopdir}/lib/libopiesecurity2.so*"
+FILES_libopiesecurity2 = "${palmtopdir}/lib/libopiesecurity2.so.*"
DESCRIPTION_libopiebluez2 = "Opie Development Platform 1.x Bluetooth Library"
-FILES_libopiebluez2 = "${palmtopdir}/lib/libopiebluez2.so*"
+FILES_libopiebluez2 = "${palmtopdir}/lib/libopiebluez2.so.*"
require ${PN}.inc
-PR = "r1"
+PR = "r2"
SRC_URI = "${HANDHELDS_CVS};tag=${TAG};module=opie/libopie2 \
file://include.pro \
require ${PN}.inc
PV = "1.2.2+cvs${SRCDATE}"
-PR = "r6"
+PR = "r7"
DEFAULT_PREFERENCE = "-1"
SRC_URI = "${HANDHELDS_CVS};module=opie/libopie2 \
- file://exports.patch;patch=1 \
file://include.pro"
+# Patches merged upstream, keep for reference (for 1.2.2)
# file://ipaq-lcd-rotate-cleanup.patch;patch=1 \
+# file://exports.patch;patch=1 \
SRC_URI_append_poodle = " file://poodle-2.6-hotkeys.patch;patch=1"
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-hnd0
-# Thu Dec 14 14:24:35 2006
+# Linux kernel version: 2.6.20-hnd0
+# Wed Mar 28 10:35:44 2007
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_IPC_NS is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
-# CONFIG_MINIMAL_OOPS is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
-CONFIG_UID16=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_USELIB=y
-CONFIG_CORE_DUMP=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
#
# Intel PXA2xx Implementations
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_TOSHIBA_TMIO_OHCI is not set
# CONFIG_ARCH_ESERIES is not set
# CONFIG_MACH_A620 is not set
# CONFIG_MACH_A716 is not set
+# CONFIG_MACH_A730 is not set
# CONFIG_ARCH_H1900 is not set
# CONFIG_ARCH_H2200 is not set
-# CONFIG_ARCH_H3900 is not set
+# CONFIG_MACH_H3900 is not set
# CONFIG_MACH_H4000 is not set
# CONFIG_MACH_H4700 is not set
# CONFIG_MACH_HX2750 is not set
# CONFIG_MACH_HTCAPACHE is not set
# CONFIG_MACH_BLUEANGEL is not set
# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_ARCH_AXIMX5 is not set
+# CONFIG_MACH_HW6900 is not set
# CONFIG_ARCH_AXIMX3 is not set
+# CONFIG_ARCH_AXIMX5 is not set
+# CONFIG_MACH_X50 is not set
# CONFIG_ARCH_ROVERP1 is not set
# CONFIG_ARCH_ROVERP5P is not set
# CONFIG_MACH_XSCALE_PALMLD is not set
+# CONFIG_MACH_XSCALE_PALMTREO650 is not set
+# CONFIG_MACH_XSCALE_TREO680 is not set
+# CONFIG_MACH_T700WX is not set
# CONFIG_MACH_TUNGE2 is not set
# CONFIG_MACH_T3XSCALE is not set
# CONFIG_MACH_XSCALE_PALMTT5 is not set
CONFIG_MACH_XSCALE_PALMTX=y
-CONFIG_PALMTX_AC97=m
-CONFIG_PALMTX_LCD=m
# CONFIG_PALMTX_PCMCIA is not set
# CONFIG_PALMTX_DEBUG is not set
+CONFIG_PALMTX_BATTERY=m
+CONFIG_PALMTX_PM=y
# CONFIG_MACH_PALMZ72 is not set
# CONFIG_MACH_OMAP_PALMTC is not set
+# CONFIG_MACH_ZIRE31 is not set
+CONFIG_GPIOED=m
+CONFIG_GPIOEDNG=m
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA27x=y
-CONFIG_PXA_RTC_EPOCH=1970
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
#
# Linux As Bootloader
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
# CONFIG_ARMBOOT_PROC is not set
CONFIG_XSCALE_PMU=y
# CONFIG_KEXEC is not set
#
-# Compaq/iPAQ Platforms
-#
-
-#
# Compaq/iPAQ Drivers
#
#
# Compaq/HP iPAQ Drivers
#
-# CONFIG_IPAQ_HAMCOP is not set
#
# Bus support
#
# Kernel Features
#
-# CONFIG_PREEMPT is not set
-CONFIG_NO_IDLE_HZ=y
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_DPM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_APM=y
#
# Networking
# Networking options
#
# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
+CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
-CONFIG_NET_KEY=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
+CONFIG_IRDA=y
#
# IrDA protocols
#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
+# CONFIG_IRLAN is not set
+# CONFIG_IRNET is not set
CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
+# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
-CONFIG_IRDA_DEBUG=y
+# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
# SIR device drivers
#
-CONFIG_IRTTY_SIR=m
+# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
-# CONFIG_DONGLE is not set
#
# Old SIR device drivers
#
-CONFIG_IRPORT_SIR=m
+# CONFIG_IRPORT_SIR is not set
#
# Old Serial dongle support
#
-# CONFIG_DONGLE_OLD is not set
#
# FIR device drivers
#
-CONFIG_PXA_FICP=m
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_PXA_FICP=y
+CONFIG_BT=m
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_SCO is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUART=m
+# CONFIG_BT_HCIUART_H4 is not set
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# PHY device support
#
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
-# CONFIG_NET_ETHERNET is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
#
# Ethernet (1000 Mbit)
# Wan interfaces
#
# CONFIG_WAN is not set
-CONFIG_PPP=m
+CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
+CONFIG_SLHC=y
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
-CONFIG_KEYBOARD_PALMIR=m
+# CONFIG_GPIO_KEYS is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_PALMWK is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_ADC is not set
+# CONFIG_TOUCHSCREEN_ADC_DEBOUNCE is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_WM97XX=y
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
# CONFIG_TOUCHSCREEN_WM9713 is not set
-CONFIG_TOUCHSCREEN_WM97XX_PXA=y
-CONFIG_TOUCHSCREEN_WM97XX_ACC=y
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
+# CONFIG_TOUCHSCREEN_WM97XX_PXA is not set
+# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_PXA_COUNT=4
+# CONFIG_SERIAL_PXA_IR is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-CONFIG_I2C_ALGOPXA=y
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ELV is not set
-CONFIG_I2C_PXA=y
-CONFIG_I2C_PXA_SLAVE=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_I2C_ADCM2650 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCA9535 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-
-#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=m
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
CONFIG_SA1100_RTC=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
#
# SPI support
#
# Hardware Monitoring support
#
-CONFIG_HWMON=m
+# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring - Battery
+#
+CONFIG_BATTERY_MONITOR=y
+# CONFIG_ADC_BATTERY is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
#
# SoC drivers
# CONFIG_SOC_T7L66XB is not set
# CONFIG_SOC_TC6387XB is not set
# CONFIG_SOC_TC6393XB is not set
+# CONFIG_SOC_SAMCOP is not set
+# CONFIG_SOC_HAMCOP is not set
# CONFIG_HTC_ASIC2 is not set
# CONFIG_HTC_ASIC3 is not set
+# CONFIG_HTC_ASIC3_DS1WM is not set
+# CONFIG_SOC_TSC2200 is not set
#
# Misc devices
#
-CONFIG_BATTERY_MONITOR=m
+# CONFIG_BATTCHARGE_MONITOR is not set
#
# Multimedia Capabilities Port drivers
#
# CONFIG_MCP is not set
+# CONFIG_ADC_ADS7846_SSP is not set
+# CONFIG_ADC_AD7877 is not set
+# CONFIG_TIFM_CORE is not set
#
# LED devices
#
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# LED Triggers
#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HWTIMER is not set
+CONFIG_LEDS_TRIGGER_MMC_CARD=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_SHARED is not set
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+CONFIG_VIDEO_ADV_DEBUG=y
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_PXA_CAMERA is not set
+
+#
+# Radio Adapters
+#
+
+#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_IMAGEON is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VSFB is not set
#
# Console display driver support
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
+CONFIG_FONTS=y
CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
+# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_PXAPWM=m
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_PXAPWM=y
#
# Sound
#
-CONFIG_SOUND=m
+CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
#
# Generic devices
#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
+CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ALSA ARM devices
#
-# CONFIG_SND_A716 is not set
-# CONFIG_SND_H1910 is not set
-# CONFIG_SND_H2200 is not set
-# CONFIG_SND_H4000 is not set
-# CONFIG_SND_HTCMAGICIAN is not set
-# CONFIG_SND_HX4700 is not set
-# CONFIG_SND_HTCUNIVERSAL is not set
-# CONFIG_SND_H5XXX_AK4535 is not set
-CONFIG_SND_PXA2xx_I2SOUND=m
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
+# CONFIG_SND_PXA2xx_I2SOUND is not set
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
#
# USB support
#
# USB Gadget Support
#
-CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=m
+CONFIG_USB_PXA27X=y
# CONFIG_USB_PXA27X_DMA is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_MQ11XX is not set
# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_CHAR=m
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_CHAR is not set
#
# MMC/SD Card support
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_PXA=y
+# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SAMCOP is not set
-# CONFIG_MMC_ASIC3 is not set
-# CONFIG_MMC_WBSD_PALMT3 is not set
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
+CONFIG_RTC_EPOCH=1970
#
# RTC interfaces
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_SA1100=m
# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
+# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
+# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=m
+# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_SQUASHFS_VMALLOC=y
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_SQUASHFS_LZMA is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-CONFIG_UNION_FS=m
+# CONFIG_UNION_FS is not set
#
# Network File Systems
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
+CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
+CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
+CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_SMALLOOPS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
# CONFIG_DEBUG_USER is not set
#
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
HOMEPAGE = "http://www.hackndev.com/"
SECTION = "kernel"
LICENSE = "GPL"
-PR = "r3"
+PR = "r4"
COMPATIBLE_MACHINE = "(palmtt3|palmtx|palmld|palmz72)"
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc1
-# Wed Feb 21 22:29:14 2007
+# Linux kernel version: 2.6.21-rc4
+# Sun Mar 25 15:52:14 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DEFAULT_UIMAGE=y
#
# Processor support
CONFIG_IKCONFIG_PROC=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
SECTION = "x11/panels"
DEPENDS = "gtk+"
-RREPLACES_${PN} = "matchbox-panel"
RCONFLICTS_${PN} = "matchbox-panel"
PV = "0.1+svn${SRCDATE}"
-PR = "r4"
+PR = "r5"
SRC_URI = "svn://svn.o-hand.com/repos/matchbox/trunk;module=${PN};proto=http"
S = "${WORKDIR}/${PN}"
--- /dev/null
+--- /tmp/configure 2007-03-30 19:40:34.000000000 +0200
++++ MPlayer-1.0rc1/configure 2007-03-30 19:40:58.795251000 +0200
+@@ -1213,7 +1213,7 @@
+ _optimizing=''
+ ;;
+
+- ppc)
++ ppc|powerpc)
+ _def_arch='#define ARCH_POWERPC 1'
+ _def_dcbzl='#define NO_DCBZL 1'
+ _target_arch='TARGET_ARCH_POWERPC = yes'
file://makefile-nostrip.patch;patch=1 \
${SOURCEFORGE_MIRROR}/libw100/mplayer-imageon.patch;patch=1 \
file://imageon-video_out.patch;patch=1 \
+ file://powerpc-is-ppc.diff;patch=1 \
file://pxa_configure.patch;patch=1 \
file://pxa-video_out.patch;patch=1 "
RCONFLICTS_${PN} = "mplayer-atty"
RREPLACES_${PN} = "mplayer-atty"
-PR = "r11"
+PR = "r12"
PARALLEL_MAKE = ""
DESCRIPTION = "openmoko-libs is a set of libraries implementing a Gtk+ based application framework for mobile communication applications"
SECTION = "openmoko/libs"
LICENSE = "LGPL"
-DEPENDS += "gtk+"
+DEPENDS += "gtk+ eds-dbus"
PV = "0.0.1+svn${SRCDATE}"
-PR = "r1"
+PR = "r2"
inherit openmoko
autotools_stage_all
}
+PACKAGES =+ "libmokojournal libmokojournal-dev libmokojournal-dbg"
+
+FILES_libmokojournal = "${libdir}/libmokojournal.so.*"
+FILES_libmokojournal-dev = "${libdir}/libmokojournal.so ${libdir}/libmokojournal.*a ${includedir}/${PN}/libmokojournal"
+FILES_libmokojournal-dbg = "${libdir}/.debug/libmokojournal.so.*"
LICENSE = "GPL"
DEPENDS = "glib-2.0 gtk+ libglade eds-dbus openmoko-libs"
RDEPENDS = "libedata-cal"
-RCONFLICTS = "dates"
-RREPLACES = "dates"
+RCONFLICTS_${PN} = "dates"
PV = "0.1+svn${SRCDATE}"
-PR = "r7"
+PR = "r8"
inherit gnome autotools pkgconfig gtk-icon-cache
--- /dev/null
+DESCRIPTION = "Opie Startup scripts and config"
+SECTION = "opie/base"
+PRIORITY = "optional"
+LICENSE = "GPL"
+#APPNAME = "qpe"
+
+#S = "${WORKDIR}/launcher"
+
+#inherit opie
+inherit update-rc.d
+
+INITSCRIPT_NAME = "opie"
+INITSCRIPT_PARAMS = "start 99 5 . stop 20 0 1 6 ."
+
+do_install() {
+ install -d ${D}${sysconfdir}/init.d
+ install -d ${D}${sysconfdir}/profile.d
+ install -d ${D}${palmtopdir}/bin
+ install -d ${D}${palmtopdir}/etc/skel
+
+ install -m 0755 ${WORKDIR}/opie ${D}${sysconfdir}/init.d/opie
+ install -m 0644 ${WORKDIR}/opie_defaults ${D}${sysconfdir}/profile.d/
+
+ install -m 0755 ${WORKDIR}/opie-reorgfiles ${D}${palmtopdir}/bin/
+ install -m 0644 ${WORKDIR}/qpe.conf ${D}${palmtopdir}/etc/skel/
+
+ if [ -s ${WORKDIR}/locale.conf ]; then
+ install -m 0644 ${WORKDIR}/locale.conf ${D}${palmtopdir}/etc/skel/
+ fi
+
+ case ${MACHINE} in
+ c7x0)
+ install -d ${D}${sysconfdir}/apm/event.d/
+ install -m 0755 ${WORKDIR}/qpe-suspend-resume ${D}${sysconfdir}/apm/event.d/00-qpe-suspend-resume.sh
+ ;;
+ *)
+ ;;
+ esac
+}
+
+FILES_opie-init_append = " ${sysconfdir} ${palmtopdir}"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
--- /dev/null
+[Appearance]
+useBigPixmaps = 1
+SmallIconSize = 32
+BigIconSize = 48
+FontFamily = DejaVu_Sans
+FontStyle = Regular
+FontSize = 16
+FixedFontFamily = DejaVu_Sans_Mono
+FixedFontStyle = Regular
+FixedFontSize = 14
+Background = #d5d0de
+Base = #ffffff
+Button = #e3e3e3
+ButtonText = #000000
+Decoration = libliquid.so
+Highlight = #52719c
+HighlightedText = #ffffff
+Style = Windows
+Text = #000000
+TabStyle = 1
+[InputMethod]
+current = Multikey
--- /dev/null
+#!/bin/sh
+#
+[ -z $LOGNAME ] && export LOGNAME=root && export HOME=/home/root
+[ -z $HOME ] && export HOME=/home/$LOGNAME
+
+# we need to tinker directly with qws_display until the ODevice
+# default (which is now W100:Rot0:0) works flawlessly with rotation
+# and survives a suspend/resume cycle
+export QWS_DISPLAY=Transformed:Rot0:0
+# export QWS_DISPLAY=W100:Rot0:0
+export QTDIR=/opt/QtPalmtop
+export OPIEDIR=/opt/QtPalmtop
+export QPEDIR=/opt/QtPalmtop
+export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$OPIEDIR/lib
+export PATH=$PATH:$OPIEDIR/bin
+
+if [ ! -x "$OPIEDIR/bin/qpe" ] ; then
+ echo Opie not installed
+ exit 0
+fi
+
+. /etc/profile
+
+for conf in $OPIEDIR/etc/skel/*.conf; do
+ conf_basename=`basename $conf`
+ if [ ! -e "$HOME/Settings/$conf_basename" ] ; then
+ echo "Copying default $conf_basename into $HOME/Settings/"
+ mkdir -p $HOME/Settings/
+ cat $conf >$HOME/Settings/$conf_basename
+ fi
+done
+
+if [ ! -e "$HOME/systeminfo/linkver" ] ; then
+ mkdir -p $HOME/systeminfo/
+ echo "1.13" >$HOME/systeminfo/linkver
+fi
+
+if [ ! -e "/opt/Qtopia" ] ; then
+ ln -sf /opt/QtPalmtop /opt/Qtopia
+fi
+
+case $1 in
+'start')
+ #/sbin/getkey 5 "Starting Opie in 5 seconds... press key to interrupt." && exit 0
+
+ if [ -x "$OPIEDIR/bin/opie-login" ]; then
+ echo Starting Opie-login....
+ $OPIEDIR/bin/opie-login -terminal 2
+ else
+ $OPIEDIR/bin/opie-reorgfiles
+ if [ -x /usr/bin/ssh-agent ]; then
+ SSHAGENT=/usr/bin/ssh-agent
+ else
+ SSHAGENT=""
+ fi
+
+ if [ -x "$OPIEDIR/bin/opie-sh-ssh-askpass.sh" ]; then
+ export SSH_ASKPASS=$OPIEDIR/bin/opie-sh-ssh-askpass.sh
+ fi
+ echo Starting Opie....
+ $SSHAGENT $OPIEDIR/bin/qpe -terminal 2
+ fi
+
+ ;;
+
+'stop')
+ echo "Stopping Opie..."
+ killall qpe 2>/dev/null
+ killall opie-login 2>/dev/null
+ killall quicklauncher 2>/dev/null
+
+ ;;
+
+'restart')
+ $0 stop && $0 start
+
+ ;;
+
+*)
+ echo "usage: $0 { start | stop | restart }"
+
+ ;;
+
+esac
+
--- /dev/null
+#!/bin/sh
+
+QTDIR=/opt/QtPalmtop
+LD_LIBRARY_PATH=$QTDIR
+export LD_LIBRARY_PATH QTDIR
+LOGGING=0
+log() {
+ if [ $LOGGING -eq 1 ]; then
+ echo "$(date +%y/%m/%d-%H:%m:%S): $@" >> /var/log/qte.log
+ fi
+}
+
+retcode=1
+tries=3
+
+if [ "$1" = suspend ]; then
+ while [ $retcode -ne 0 -a $tries -gt 0 ]; do
+ log "-> $QTDIR/bin/qcop QPE/System 'aboutToSuspend()'"
+ $QTDIR/bin/qcop QPE/System 'aboutToSuspend()'
+ retcode=$?
+ tries=`expr $tries - 1`
+ log "<- Result $retcode"
+ done
+elif [ "$1" = resume ]; then
+ while [ $retcode -ne 0 -a $tries -gt 0 ]; do
+ log "-> $QTDIR/bin/qcop QPE/System 'returnFromSuspend()'"
+ $QTDIR/bin/qcop QPE/System 'returnFromSuspend()'
+ retcode=$?
+ tries=`expr $tries - 1`
+ log "<- Result $retcode"
+ done
+fi
+
--- /dev/null
+[Appearance]
+useBigPixmaps = 1
+SmallIconSize = 32
+BigIconSize = 48
+FontFamily = DejaVu_Sans
+FontStyle = Regular
+FontSize = 16
+FixedFontFamily = DejaVu_Sans_Mono
+FixedFontStyle = Regular
+FixedFontSize = 14
+Background = #d5d0de
+Base = #ffffff
+Button = #e3e3e3
+ButtonText = #000000
+Decoration = libliquid.so
+Highlight = #52719c
+HighlightedText = #ffffff
+Style = Windows
+Text = #000000
+TabStyle = 1
+[InputMethod]
+current = Multikey
--- /dev/null
+[Appearance]
+useBigPixmaps = 1
+SmallIconSize = 32
+BigIconSize = 48
+FontFamily = DejaVu_Sans
+FontStyle = Regular
+FontSize = 16
+FixedFontFamily = DejaVu_Sans_Mono
+FixedFontStyle = Regular
+FixedFontSize = 14
+Background = #d5d0de
+Base = #ffffff
+Button = #e3e3e3
+ButtonText = #000000
+Decoration = libliquid.so
+Highlight = #52719c
+HighlightedText = #ffffff
+Style = Windows
+Text = #000000
+TabStyle = 1
+[InputMethod]
+current = Multikey
--- /dev/null
+#!/bin/sh
+#
+[ -z $LOGNAME ] && export LOGNAME=root && export HOME=/home/root
+[ -z $HOME ] && export HOME=/home/$LOGNAME
+
+export QTDIR=/opt/QtPalmtop
+export OPIEDIR=/opt/QtPalmtop
+export QPEDIR=/opt/QtPalmtop
+export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$OPIEDIR/lib
+export PATH=$PATH:$OPIEDIR/bin
+# export QWS_KEYBOARD=KernelTTY
+
+if [ ! -x "$OPIEDIR/bin/qpe" ] ; then
+ echo Opie not installed
+ exit 0
+fi
+
+. /etc/profile
+
+if [ ! -e "$HOME/Settings/qpe.conf" ] ; then
+ mkdir -p $HOME/Settings
+ cp $OPIEDIR/etc/skel/* $HOME/Settings
+fi
+
+if [ ! -e "$HOME/systeminfo/linkver" ] ; then
+ mkdir -p $HOME/systeminfo/
+ echo "1.13" >$HOME/systeminfo/linkver
+fi
+
+if [ ! -e "/opt/Qtopia" ] ; then
+ ln -sf /opt/QtPalmtop /opt/Qtopia
+fi
+
+case $1 in
+'start')
+ if [ -x "$OPIEDIR/bin/opie-login" ]; then
+ echo Starting Opie-login....
+ $OPIEDIR/bin/opie-login -terminal 2
+ else
+ $OPIEDIR/bin/opie-reorgfiles >/dev/null
+ if [ -x /usr/bin/ssh-agent ]; then
+ SSHAGENT=/usr/bin/ssh-agent
+ else
+ SSHAGENT=""
+ fi
+
+ if [ -x "$OPIEDIR/bin/opie-sh-ssh-askpass.sh" ]; then
+ export SSH_ASKPASS=$OPIEDIR/bin/opie-sh-ssh-askpass.sh
+ fi
+ echo Starting Opie....
+ $SSHAGENT $OPIEDIR/bin/qpe -terminal 2 2>/dev/null
+ fi
+
+ ;;
+
+'stop')
+ echo "Stopping Opie..."
+ killall qpe 2>/dev/null
+ killall opie-login 2>/dev/null
+ killall quicklauncher 2>/dev/null
+ sleep 1
+ killall -9 qpe 2>/dev/null
+ killall -9 opie-login 2>/dev/null
+ killall -9 quicklauncher 2>/dev/null
+
+ ;;
+
+'restart')
+ $0 stop && $0 start
+
+ ;;
+
+*)
+ echo "usage: $0 { start | stop | restart }"
+
+ ;;
+
+esac
+
--- /dev/null
+[Appearance]
+Decoration = libflat.so
+FontFamily = vera
+FontSize = 10
+FontStyle = Regular
+LeftHand = 0
+Style = libflatstyle.so
+rotatedir = 0
+[Battery]
+[Date]
+ClockApplet = 0
+LongOrder = 273
+Separator = .
+ShortOrder = 273
+[InputMethod]
+current = Multikey
+[Keyboard]
+[Startup]
+FirstUse = 0
+[Time]
+AMPM = 0
+MONDAY = 1
+[Volume]
+[Wireless]
+UpdateFrequency = 2
--- /dev/null
+#!/bin/sh
+#
+[ -z $LOGNAME ] && export LOGNAME=root && export HOME=/home/root
+[ -z $HOME ] && export HOME=/home/$LOGNAME
+
+export QTDIR=/opt/QtPalmtop
+export OPIEDIR=/opt/QtPalmtop
+export QPEDIR=/opt/QtPalmtop
+export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$OPIEDIR/lib
+export PATH=$PATH:$OPIEDIR/bin
+
+if [ ! -x "$OPIEDIR/bin/qpe" ] ; then
+ echo Opie not installed
+ exit 0
+fi
+
+. /etc/profile
+
+if [ ! -e $TSLIB_TSDEVICE ]; then
+ export QWS_MOUSE_PROTO=MouseMan:/dev/input/mice
+fi
+
+for conf in $OPIEDIR/etc/skel/*.conf; do
+ conf_basename=`basename $conf`
+ if [ ! -e "$HOME/Settings/$conf_basename" ] ; then
+ echo "Copying default $conf_basename into $HOME/Settings/"
+ mkdir -p $HOME/Settings/
+ cat $conf >$HOME/Settings/$conf_basename
+ fi
+done
+
+if [ ! -e "$HOME/systeminfo/linkver" ] ; then
+ mkdir -p $HOME/systeminfo/
+ echo "1.13" >$HOME/systeminfo/linkver
+fi
+
+if [ ! -e "/opt/Qtopia" ] ; then
+ ln -sf /opt/QtPalmtop /opt/Qtopia
+fi
+
+case $1 in
+'start')
+ #/sbin/getkey 5 "Starting Opie in 5 seconds... press key to interrupt." && exit 0
+
+ # Turn off psplash if any - sleep is required for anti-race
+ if [ -e /mnt/.psplash ]; then
+ TMPDIR=/mnt/.psplash psplash-write "QUIT" || true
+ sleep 1
+ fi
+
+ if [ -x "$OPIEDIR/bin/opie-login" ]; then
+ echo Starting Opie-login....
+ $OPIEDIR/bin/opie-login -terminal 3
+ else
+ $OPIEDIR/bin/opie-reorgfiles
+ if [ -x /usr/bin/ssh-agent ]; then
+ SSHAGENT=/usr/bin/ssh-agent
+ else
+ SSHAGENT=""
+ fi
+
+ if [ -x "$OPIEDIR/bin/opie-sh-ssh-askpass.sh" ]; then
+ export SSH_ASKPASS=$OPIEDIR/bin/opie-sh-ssh-askpass.sh
+ fi
+ echo Starting Opie....
+ $SSHAGENT $OPIEDIR/bin/qpe -terminal 3
+ fi
+
+ ;;
+
+'stop')
+ echo "Stopping Opie..."
+ killall qpe 2>/dev/null
+ killall opie-login 2>/dev/null
+ killall quicklauncher 2>/dev/null
+
+ ;;
+
+'restart')
+ $0 stop && $0 start
+
+ ;;
+
+*)
+ echo "usage: $0 { start | stop | restart }"
+
+ ;;
+
+esac
+
--- /dev/null
+#!/bin/sh
+
+APPS=$HOME/Applications
+DOCS=$HOME/Documents
+
+if [ -d $APPS -a "$1" != "-f" ]
+then
+ echo "You seem to already have a $APPS directory."
+ echo "Assuming it is the Opie Applications directory. Exiting."
+ exit 0
+fi
+
+if [ -d $HOME/Apps ]
+then
+ mv $HOME/Apps $APPS
+else
+ mkdir $APPS
+fi
+
+if [ -f $DOCS/addressbook.xml ]
+then
+ if [ -f $APPS/addressbook/addressbook.xml ]
+ then
+ echo "$DOCS/addressbook.xml conflicts with $APPS/addressbook/addressbook.xml"
+ echo "Moving $DOCS/addressbook.xml to $HOME"
+ mv $DOCS/addressbook.xml $HOME
+ else
+ mkdir $APPS/addressbook
+ mv $DOCS/addressbook.xml $APPS/addressbook
+ fi
+fi
+
+if [ -f $DOCS/datebooksettings.xml ]
+then
+ echo "$DOCS/datebooksettings.xml is obsolete"
+ echo "Please re-set your datebook preferences"
+ rm $DOCS/datebooksettings.xml
+fi
+
+if [ -f $DOCS/datebook.xml ]
+then
+ mkdir $APPS/databook
+ mv $DOCS/datebook.xml $APPS/databook
+fi
+
+if [ -d $DOCS/qtmail ]
+then
+ mv $DOCS/qtmail $APPS/
+fi
+
+if [ -f $DOCS/todo.xml ]
+then
+ if [ -f $APPS/todolist/todolist.xml ]
+ then
+ mv $DOCS/todo.xml $HOME
+ echo "$DOCS/todo.xml is superceded by $APPS/todolist/todolist.xml"
+ echo "$DOCS/todo.xml has been moved to $HOME"
+ else
+ echo "NOTE: $DOCS/todo.xml is obsolete. It will move to $APPS/todolist/todolist.xml"
+ echo "when next you run the latest ToDo application."
+ fi
+fi
+
+if [ ! -d $APPS/qimpen ]
+then
+ mkdir $APPS/qimpen
+fi
+
+if [ -f $DOCS/asciilower.qpt ]
+then
+ mv $DOCS/asciilower.qpt $APPS/qimpen
+fi
+
+if [ -f $DOCS/asciiupper.qpt ]
+then
+ mv $DOCS/asciiupper.qpt $APPS/qimpen
+fi
+
+if [ -f $DOCS/numeric.qpt ]
+then
+ mv $DOCS/numeric.qpt $APPS/qimpen
+fi
+
+if [ -d "$HOME/.qpe" ]
+then
+ if [ -d "$HOME/Settings" ]
+ then
+ mv $HOME/.qpe/* "$HOME/Settings"
+ rmdir "$HOME/.qpe"
+ else
+ mv $HOME/.qpe "$HOME/Settings"
+ fi
+fi
--- /dev/null
+#!/bin/sh
+
+MACHINE="`cat /proc/cpuinfo | sed -n "/^Hardware/s/.*\:\(.*\)/\1/;s/^\ //p"`"
+KVER="`uname -r | sed -n "s/\([0-9]\)\.\([0-9]\)\..*/\1.\2/p"`"
+
+case "$MACHINE" in
+*Poodle) test "$KVER" = "2.6" && export QWS_CURSOR_ROTATION=90;;
+esac
+
+export QTDIR="/opt/QtPalmtop"
+export OPIEDIR="$QTDIR"
+export QPEDIR="$QTDIR"
+export LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$OPIEDIR/lib"
+export PATH="$PATH:$OPIEDIR/bin"
+
--- /dev/null
+[Appearance]
+FontFamily = DejaVu_Sans
+FontStyle = Regular
+FontSize = 9
+FixedFontFamily = DejaVu_Sans_Mono
+FixedFontStyle = Regular
+FixedFontSize = 9
+Background = #d5d0de
+Base = #ffffff
+Button = #e3e3e3
+ButtonText = #000000
+Decoration = libliquid.so
+Highlight = #52719c
+HighlightedText = #ffffff
+Style = libphasestyle.so
+Text = #000000
+[InputMethod]
+current = Multikey
--- /dev/null
+[Appearance]
+FontFamily = DejaVu_Sans
+FontStyle = Regular
+FontSize = 12
+FixedFontFamily = DejaVu_Sans_Mono
+FixedFontStyle = Regular
+FixedFontSize = 12
+Background = #d5d0de
+Base = #ffffff
+Button = #e3e3e3
+ButtonText = #000000
+Decoration = libliquid.so
+Highlight = #52719c
+HighlightedText = #ffffff
+Style = libphasestyle.so
+Text = #000000
+[InputMethod]
+current = Multikey
--- /dev/null
+[Appearance]
+useBigPixmaps = 1
+SmallIconSize = 32
+BigIconSize = 48
+FontFamily = DejaVu_Sans
+FontStyle = Regular
+FontSize = 16
+FixedFontFamily = DejaVu_Sans_Mono
+FixedFontStyle = Regular
+FixedFontSize = 14
+Background = #d5d0de
+Base = #ffffff
+Button = #e3e3e3
+ButtonText = #000000
+Decoration = libliquid.so
+Highlight = #52719c
+HighlightedText = #ffffff
+Style = Windows
+Text = #000000
+TabStyle = 1
+[InputMethod]
+current = Multikey
--- /dev/null
+[Appearance]
+useBigPixmaps = 1
+SmallIconSize = 32
+BigIconSize = 48
+FontFamily = DejaVu_Sans
+FontStyle = Regular
+FontSize = 16
+FixedFontFamily = DejaVu_Sans_Mono
+FixedFontStyle = Regular
+FixedFontSize = 14
+Background = #d5d0de
+Base = #ffffff
+Button = #e3e3e3
+ButtonText = #000000
+Decoration = libliquid.so
+Highlight = #52719c
+HighlightedText = #ffffff
+Style = Windows
+Text = #000000
+TabStyle = 1
+[InputMethod]
+current = Multikey
--- /dev/null
+require ${PN}.inc
+PR = "r0"
+
+SRC_URI = "file://opie-reorgfiles \
+ file://opie \
+ file://qpe.conf \
+ file://locale.conf \
+ file://opie_defaults"
+
+SRC_URI_append_c7x0 = " file://qpe-suspend-resume"
PIXMAP_SIZE_htcuniversal= "-480x640"
PIXMAP_SIZE_hx4700 = "-480x640"
-inherit opie update-rc.d
-
-INITSCRIPT_NAME = "opie"
-INITSCRIPT_PARAMS = "start 99 5 . stop 20 0 1 6 ."
+inherit opie
do_configure_prepend() {
ln -s ${WORKDIR}/calibrate ${S}/calibrate
install -d ${D}${palmtopdir}/pics/launcher
install -d ${D}${palmtopdir}/pics/logo
install -d ${D}${palmtopdir}/pics/RoH/star/
- install -d ${D}${sysconfdir}/init.d
- install -d ${D}${sysconfdir}/profile.d
install -d ${D}${palmtopdir}/etc/colors
install -d ${D}${palmtopdir}/etc/skel
+ install -d ${D}${sysconfdir}
install -m 0755 ${S}/qpe ${D}${palmtopdir}/bin/qpe
- install -m 0755 ${WORKDIR}/opie-reorgfiles ${D}${palmtopdir}/bin/
install -m 0644 ${WORKDIR}/apps/Settings/calibrate.desktop ${D}${palmtopdir}/apps/Settings/
install -m 0644 ${WORKDIR}/apps/Settings/quit.desktop ${D}${palmtopdir}/apps/Settings/
- install -m 0644 ${WORKDIR}/opie_defaults ${D}${sysconfdir}/profile.d/
for p in ${PICS}
do
install -m 0644 ${WORKDIR}/etc/colors/*.scheme ${D}${palmtopdir}/etc/colors/
install -m 0644 ${WORKDIR}/etc/mime.types ${D}${sysconfdir}/
- install -m 0755 ${WORKDIR}/opie ${D}${sysconfdir}/init.d/opie
- install -m 0644 ${WORKDIR}/qpe.conf ${D}${palmtopdir}/etc/skel/
-
- if [ -s ${WORKDIR}/locale.conf ]; then
- install -m 0644 ${WORKDIR}/locale.conf ${D}${palmtopdir}/etc/skel/
- fi
-
install -m 0644 ${WORKDIR}/pics/capslock.xpm ${D}${palmtopdir}/pics/
install -m 0644 ${WORKDIR}/pics/numlock.xpm ${D}${palmtopdir}/pics/
-
- case ${MACHINE} in
- c7x0)
- install -d ${D}${sysconfdir}/apm/event.d/
- install -m 0755 ${WORKDIR}/qpe-suspend-resume ${D}${sysconfdir}/apm/event.d/00-qpe-suspend-resume.sh
- ;;
- *)
- ;;
- esac
-}
-
-updatercd_postinst_mnci() {
-if test "x$D" != "x"; then
- D="-r $D"
-else
- D="" # do not autostart at installation time
-fi
-update-rc.d $D ${INITSCRIPT_NAME} ${INITSCRIPT_PARAMS}
}
FILES_opie-taskbar_append = " ${sysconfdir} ${palmtopdir}/apps ${palmtopdir}/pics"
+++ /dev/null
-[Appearance]
-useBigPixmaps = 1
-SmallIconSize = 32
-BigIconSize = 48
-FontFamily = DejaVu_Sans
-FontStyle = Regular
-FontSize = 16
-FixedFontFamily = DejaVu_Sans_Mono
-FixedFontStyle = Regular
-FixedFontSize = 14
-Background = #d5d0de
-Base = #ffffff
-Button = #e3e3e3
-ButtonText = #000000
-Decoration = libliquid.so
-Highlight = #52719c
-HighlightedText = #ffffff
-Style = Windows
-Text = #000000
-TabStyle = 1
-[InputMethod]
-current = Multikey
+++ /dev/null
-#!/bin/sh
-#
-[ -z $LOGNAME ] && export LOGNAME=root && export HOME=/home/root
-[ -z $HOME ] && export HOME=/home/$LOGNAME
-
-# we need to tinker directly with qws_display until the ODevice
-# default (which is now W100:Rot0:0) works flawlessly with rotation
-# and survives a suspend/resume cycle
-export QWS_DISPLAY=Transformed:Rot0:0
-# export QWS_DISPLAY=W100:Rot0:0
-export QTDIR=/opt/QtPalmtop
-export OPIEDIR=/opt/QtPalmtop
-export QPEDIR=/opt/QtPalmtop
-export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$OPIEDIR/lib
-export PATH=$PATH:$OPIEDIR/bin
-
-if [ ! -x "$OPIEDIR/bin/qpe" ] ; then
- echo Opie not installed
- exit 0
-fi
-
-. /etc/profile
-
-for conf in $OPIEDIR/etc/skel/*.conf; do
- conf_basename=`basename $conf`
- if [ ! -e "$HOME/Settings/$conf_basename" ] ; then
- echo "Copying default $conf_basename into $HOME/Settings/"
- mkdir -p $HOME/Settings/
- cat $conf >$HOME/Settings/$conf_basename
- fi
-done
-
-if [ ! -e "$HOME/systeminfo/linkver" ] ; then
- mkdir -p $HOME/systeminfo/
- echo "1.13" >$HOME/systeminfo/linkver
-fi
-
-if [ ! -e "/opt/Qtopia" ] ; then
- ln -sf /opt/QtPalmtop /opt/Qtopia
-fi
-
-case $1 in
-'start')
- #/sbin/getkey 5 "Starting Opie in 5 seconds... press key to interrupt." && exit 0
-
- if [ -x "$OPIEDIR/bin/opie-login" ]; then
- echo Starting Opie-login....
- $OPIEDIR/bin/opie-login -terminal 2
- else
- $OPIEDIR/bin/opie-reorgfiles
- if [ -x /usr/bin/ssh-agent ]; then
- SSHAGENT=/usr/bin/ssh-agent
- else
- SSHAGENT=""
- fi
-
- if [ -x "$OPIEDIR/bin/opie-sh-ssh-askpass.sh" ]; then
- export SSH_ASKPASS=$OPIEDIR/bin/opie-sh-ssh-askpass.sh
- fi
- echo Starting Opie....
- $SSHAGENT $OPIEDIR/bin/qpe -terminal 2
- fi
-
- ;;
-
-'stop')
- echo "Stopping Opie..."
- killall qpe 2>/dev/null
- killall opie-login 2>/dev/null
- killall quicklauncher 2>/dev/null
-
- ;;
-
-'restart')
- $0 stop && $0 start
-
- ;;
-
-*)
- echo "usage: $0 { start | stop | restart }"
-
- ;;
-
-esac
-
+++ /dev/null
-#!/bin/sh
-
-QTDIR=/opt/QtPalmtop
-LD_LIBRARY_PATH=$QTDIR
-export LD_LIBRARY_PATH QTDIR
-LOGGING=0
-log() {
- if [ $LOGGING -eq 1 ]; then
- echo "$(date +%y/%m/%d-%H:%m:%S): $@" >> /var/log/qte.log
- fi
-}
-
-retcode=1
-tries=3
-
-if [ "$1" = suspend ]; then
- while [ $retcode -ne 0 -a $tries -gt 0 ]; do
- log "-> $QTDIR/bin/qcop QPE/System 'aboutToSuspend()'"
- $QTDIR/bin/qcop QPE/System 'aboutToSuspend()'
- retcode=$?
- tries=`expr $tries - 1`
- log "<- Result $retcode"
- done
-elif [ "$1" = resume ]; then
- while [ $retcode -ne 0 -a $tries -gt 0 ]; do
- log "-> $QTDIR/bin/qcop QPE/System 'returnFromSuspend()'"
- $QTDIR/bin/qcop QPE/System 'returnFromSuspend()'
- retcode=$?
- tries=`expr $tries - 1`
- log "<- Result $retcode"
- done
-fi
-
+++ /dev/null
-[Appearance]
-useBigPixmaps = 1
-SmallIconSize = 32
-BigIconSize = 48
-FontFamily = DejaVu_Sans
-FontStyle = Regular
-FontSize = 16
-FixedFontFamily = DejaVu_Sans_Mono
-FixedFontStyle = Regular
-FixedFontSize = 14
-Background = #d5d0de
-Base = #ffffff
-Button = #e3e3e3
-ButtonText = #000000
-Decoration = libliquid.so
-Highlight = #52719c
-HighlightedText = #ffffff
-Style = Windows
-Text = #000000
-TabStyle = 1
-[InputMethod]
-current = Multikey
+++ /dev/null
-[Appearance]
-useBigPixmaps = 1
-SmallIconSize = 32
-BigIconSize = 48
-FontFamily = DejaVu_Sans
-FontStyle = Regular
-FontSize = 16
-FixedFontFamily = DejaVu_Sans_Mono
-FixedFontStyle = Regular
-FixedFontSize = 14
-Background = #d5d0de
-Base = #ffffff
-Button = #e3e3e3
-ButtonText = #000000
-Decoration = libliquid.so
-Highlight = #52719c
-HighlightedText = #ffffff
-Style = Windows
-Text = #000000
-TabStyle = 1
-[InputMethod]
-current = Multikey
+++ /dev/null
-#!/bin/sh
-#
-[ -z $LOGNAME ] && export LOGNAME=root && export HOME=/home/root
-[ -z $HOME ] && export HOME=/home/$LOGNAME
-
-export QTDIR=/opt/QtPalmtop
-export OPIEDIR=/opt/QtPalmtop
-export QPEDIR=/opt/QtPalmtop
-export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$OPIEDIR/lib
-export PATH=$PATH:$OPIEDIR/bin
-# export QWS_KEYBOARD=KernelTTY
-
-if [ ! -x "$OPIEDIR/bin/qpe" ] ; then
- echo Opie not installed
- exit 0
-fi
-
-. /etc/profile
-
-if [ ! -e "$HOME/Settings/qpe.conf" ] ; then
- mkdir -p $HOME/Settings
- cp $OPIEDIR/etc/skel/* $HOME/Settings
-fi
-
-if [ ! -e "$HOME/systeminfo/linkver" ] ; then
- mkdir -p $HOME/systeminfo/
- echo "1.13" >$HOME/systeminfo/linkver
-fi
-
-if [ ! -e "/opt/Qtopia" ] ; then
- ln -sf /opt/QtPalmtop /opt/Qtopia
-fi
-
-case $1 in
-'start')
- if [ -x "$OPIEDIR/bin/opie-login" ]; then
- echo Starting Opie-login....
- $OPIEDIR/bin/opie-login -terminal 2
- else
- $OPIEDIR/bin/opie-reorgfiles >/dev/null
- if [ -x /usr/bin/ssh-agent ]; then
- SSHAGENT=/usr/bin/ssh-agent
- else
- SSHAGENT=""
- fi
-
- if [ -x "$OPIEDIR/bin/opie-sh-ssh-askpass.sh" ]; then
- export SSH_ASKPASS=$OPIEDIR/bin/opie-sh-ssh-askpass.sh
- fi
- echo Starting Opie....
- $SSHAGENT $OPIEDIR/bin/qpe -terminal 2 2>/dev/null
- fi
-
- ;;
-
-'stop')
- echo "Stopping Opie..."
- killall qpe 2>/dev/null
- killall opie-login 2>/dev/null
- killall quicklauncher 2>/dev/null
- sleep 1
- killall -9 qpe 2>/dev/null
- killall -9 opie-login 2>/dev/null
- killall -9 quicklauncher 2>/dev/null
-
- ;;
-
-'restart')
- $0 stop && $0 start
-
- ;;
-
-*)
- echo "usage: $0 { start | stop | restart }"
-
- ;;
-
-esac
-
+++ /dev/null
-[Appearance]
-Decoration = libflat.so
-FontFamily = vera
-FontSize = 10
-FontStyle = Regular
-LeftHand = 0
-Style = libflatstyle.so
-rotatedir = 0
-[Battery]
-[Date]
-ClockApplet = 0
-LongOrder = 273
-Separator = .
-ShortOrder = 273
-[InputMethod]
-current = Multikey
-[Keyboard]
-[Startup]
-FirstUse = 0
-[Time]
-AMPM = 0
-MONDAY = 1
-[Volume]
-[Wireless]
-UpdateFrequency = 2
+++ /dev/null
-#!/bin/sh
-#
-[ -z $LOGNAME ] && export LOGNAME=root && export HOME=/home/root
-[ -z $HOME ] && export HOME=/home/$LOGNAME
-
-export QTDIR=/opt/QtPalmtop
-export OPIEDIR=/opt/QtPalmtop
-export QPEDIR=/opt/QtPalmtop
-export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$OPIEDIR/lib
-export PATH=$PATH:$OPIEDIR/bin
-
-if [ ! -x "$OPIEDIR/bin/qpe" ] ; then
- echo Opie not installed
- exit 0
-fi
-
-. /etc/profile
-
-if [ ! -e $TSLIB_TSDEVICE ]; then
- export QWS_MOUSE_PROTO=MouseMan:/dev/input/mice
-fi
-
-for conf in $OPIEDIR/etc/skel/*.conf; do
- conf_basename=`basename $conf`
- if [ ! -e "$HOME/Settings/$conf_basename" ] ; then
- echo "Copying default $conf_basename into $HOME/Settings/"
- mkdir -p $HOME/Settings/
- cat $conf >$HOME/Settings/$conf_basename
- fi
-done
-
-if [ ! -e "$HOME/systeminfo/linkver" ] ; then
- mkdir -p $HOME/systeminfo/
- echo "1.13" >$HOME/systeminfo/linkver
-fi
-
-if [ ! -e "/opt/Qtopia" ] ; then
- ln -sf /opt/QtPalmtop /opt/Qtopia
-fi
-
-case $1 in
-'start')
- #/sbin/getkey 5 "Starting Opie in 5 seconds... press key to interrupt." && exit 0
-
- # Turn off psplash if any - sleep is required for anti-race
- if [ -e /mnt/.psplash ]; then
- TMPDIR=/mnt/.psplash psplash-write "QUIT" || true
- sleep 1
- fi
-
- if [ -x "$OPIEDIR/bin/opie-login" ]; then
- echo Starting Opie-login....
- $OPIEDIR/bin/opie-login -terminal 3
- else
- $OPIEDIR/bin/opie-reorgfiles
- if [ -x /usr/bin/ssh-agent ]; then
- SSHAGENT=/usr/bin/ssh-agent
- else
- SSHAGENT=""
- fi
-
- if [ -x "$OPIEDIR/bin/opie-sh-ssh-askpass.sh" ]; then
- export SSH_ASKPASS=$OPIEDIR/bin/opie-sh-ssh-askpass.sh
- fi
- echo Starting Opie....
- $SSHAGENT $OPIEDIR/bin/qpe -terminal 3
- fi
-
- ;;
-
-'stop')
- echo "Stopping Opie..."
- killall qpe 2>/dev/null
- killall opie-login 2>/dev/null
- killall quicklauncher 2>/dev/null
-
- ;;
-
-'restart')
- $0 stop && $0 start
-
- ;;
-
-*)
- echo "usage: $0 { start | stop | restart }"
-
- ;;
-
-esac
-
+++ /dev/null
-#!/bin/sh
-
-APPS=$HOME/Applications
-DOCS=$HOME/Documents
-
-if [ -d $APPS -a "$1" != "-f" ]
-then
- echo "You seem to already have a $APPS directory."
- echo "Assuming it is the Opie Applications directory. Exiting."
- exit 0
-fi
-
-if [ -d $HOME/Apps ]
-then
- mv $HOME/Apps $APPS
-else
- mkdir $APPS
-fi
-
-if [ -f $DOCS/addressbook.xml ]
-then
- if [ -f $APPS/addressbook/addressbook.xml ]
- then
- echo "$DOCS/addressbook.xml conflicts with $APPS/addressbook/addressbook.xml"
- echo "Moving $DOCS/addressbook.xml to $HOME"
- mv $DOCS/addressbook.xml $HOME
- else
- mkdir $APPS/addressbook
- mv $DOCS/addressbook.xml $APPS/addressbook
- fi
-fi
-
-if [ -f $DOCS/datebooksettings.xml ]
-then
- echo "$DOCS/datebooksettings.xml is obsolete"
- echo "Please re-set your datebook preferences"
- rm $DOCS/datebooksettings.xml
-fi
-
-if [ -f $DOCS/datebook.xml ]
-then
- mkdir $APPS/databook
- mv $DOCS/datebook.xml $APPS/databook
-fi
-
-if [ -d $DOCS/qtmail ]
-then
- mv $DOCS/qtmail $APPS/
-fi
-
-if [ -f $DOCS/todo.xml ]
-then
- if [ -f $APPS/todolist/todolist.xml ]
- then
- mv $DOCS/todo.xml $HOME
- echo "$DOCS/todo.xml is superceded by $APPS/todolist/todolist.xml"
- echo "$DOCS/todo.xml has been moved to $HOME"
- else
- echo "NOTE: $DOCS/todo.xml is obsolete. It will move to $APPS/todolist/todolist.xml"
- echo "when next you run the latest ToDo application."
- fi
-fi
-
-if [ ! -d $APPS/qimpen ]
-then
- mkdir $APPS/qimpen
-fi
-
-if [ -f $DOCS/asciilower.qpt ]
-then
- mv $DOCS/asciilower.qpt $APPS/qimpen
-fi
-
-if [ -f $DOCS/asciiupper.qpt ]
-then
- mv $DOCS/asciiupper.qpt $APPS/qimpen
-fi
-
-if [ -f $DOCS/numeric.qpt ]
-then
- mv $DOCS/numeric.qpt $APPS/qimpen
-fi
-
-if [ -d "$HOME/.qpe" ]
-then
- if [ -d "$HOME/Settings" ]
- then
- mv $HOME/.qpe/* "$HOME/Settings"
- rmdir "$HOME/.qpe"
- else
- mv $HOME/.qpe "$HOME/Settings"
- fi
-fi
+++ /dev/null
-#!/bin/sh
-
-MACHINE="`cat /proc/cpuinfo | sed -n "/^Hardware/s/.*\:\(.*\)/\1/;s/^\ //p"`"
-KVER="`uname -r | sed -n "s/\([0-9]\)\.\([0-9]\)\..*/\1.\2/p"`"
-
-case "$MACHINE" in
-*Poodle) test "$KVER" = "2.6" && export QWS_CURSOR_ROTATION=90;;
-esac
-
-export QTDIR="/opt/QtPalmtop"
-export OPIEDIR="$QTDIR"
-export QPEDIR="$QTDIR"
-export LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$OPIEDIR/lib"
-export PATH="$PATH:$OPIEDIR/bin"
-
+++ /dev/null
-[Appearance]
-FontFamily = DejaVu_Sans
-FontStyle = Regular
-FontSize = 9
-FixedFontFamily = DejaVu_Sans_Mono
-FixedFontStyle = Regular
-FixedFontSize = 9
-Background = #d5d0de
-Base = #ffffff
-Button = #e3e3e3
-ButtonText = #000000
-Decoration = libliquid.so
-Highlight = #52719c
-HighlightedText = #ffffff
-Style = libphasestyle.so
-Text = #000000
-[InputMethod]
-current = Multikey
+++ /dev/null
-[Appearance]
-FontFamily = DejaVu_Sans
-FontStyle = Regular
-FontSize = 12
-FixedFontFamily = DejaVu_Sans_Mono
-FixedFontStyle = Regular
-FixedFontSize = 12
-Background = #d5d0de
-Base = #ffffff
-Button = #e3e3e3
-ButtonText = #000000
-Decoration = libliquid.so
-Highlight = #52719c
-HighlightedText = #ffffff
-Style = libphasestyle.so
-Text = #000000
-[InputMethod]
-current = Multikey
+++ /dev/null
-[Appearance]
-useBigPixmaps = 1
-SmallIconSize = 32
-BigIconSize = 48
-FontFamily = DejaVu_Sans
-FontStyle = Regular
-FontSize = 16
-FixedFontFamily = DejaVu_Sans_Mono
-FixedFontStyle = Regular
-FixedFontSize = 14
-Background = #d5d0de
-Base = #ffffff
-Button = #e3e3e3
-ButtonText = #000000
-Decoration = libliquid.so
-Highlight = #52719c
-HighlightedText = #ffffff
-Style = Windows
-Text = #000000
-TabStyle = 1
-[InputMethod]
-current = Multikey
+++ /dev/null
-[Appearance]
-useBigPixmaps = 1
-SmallIconSize = 32
-BigIconSize = 48
-FontFamily = DejaVu_Sans
-FontStyle = Regular
-FontSize = 16
-FixedFontFamily = DejaVu_Sans_Mono
-FixedFontStyle = Regular
-FixedFontSize = 14
-Background = #d5d0de
-Base = #ffffff
-Button = #e3e3e3
-ButtonText = #000000
-Decoration = libliquid.so
-Highlight = #52719c
-HighlightedText = #ffffff
-Style = Windows
-Text = #000000
-TabStyle = 1
-[InputMethod]
-current = Multikey
require ${PN}.inc
-PR = "r6"
+PR = "r7"
SRC_URI = "${HANDHELDS_CVS};tag=${TAG};module=opie/core/apps/calibrate \
${HANDHELDS_CVS};tag=${TAG};module=opie/noncore/settings/mediummount \
${HANDHELDS_CVS};tag=${TAG};module=opie/etc \
file://nomax.patch;patch=1;pnum=3 \
file://server.pro \
- file://opie-reorgfiles \
- file://opie \
- file://qpe.conf \
- file://locale.conf \
- file://opie_defaults"
-
-SRC_URI_append_c7x0 = " file://qpe-suspend-resume"
+ "
require ${PN}.inc
PV = "${OPIE_CVS_PV}"
-PR = "r6"
+PR = "r7"
SRC_URI = "${HANDHELDS_CVS};module=opie/core/apps/calibrate \
${HANDHELDS_CVS};module=opie/noncore/settings/mediummount \
${HANDHELDS_CVS};module=opie/etc \
file://nomax.patch;patch=1;pnum=3 \
file://server.pro \
- file://opie-reorgfiles \
- file://opie \
- file://qpe.conf \
- file://locale.conf \
- file://opie_defaults"
-
-SRC_URI_append_c7x0 = " file://qpe-suspend-resume"
+ "
SECTION = "x11"
DEPENDS = "glib-2.0 gtk+ libglade eds-dbus"
RDEPENDS = "libedata-cal"
-RCONFLICTS = "openmoko-dates"
-RREPLACES = "openmoko-dates"
+RCONFLICTS_${PN} = "openmoko-dates"
inherit autotools pkgconfig gtk-icon-cache
require dates.inc
-PR = "r2"
+PR = "r3"
SRC_URI = "http://projects.o-hand.com/sources/dates/dates-${PV}.tar.gz"
require dates.inc
-PR = "r1"
+PR = "r2"
DEFAULT_PREFERENCE = "-1"
--- /dev/null
+DESCRIPTION = "Starling audio player for GPE"
+SECTION = "gpe/multimedia"
+PRIORITY = "optional"
+LICENSE = "GPL"
+DEPENDS = "gtk+ libgpewidget gstreamer gst-plugins-good gst-plugins-bad esound sqlite3 libsoup"
+RDEPENDS = "esd \
+ gst-plugin-audioconvert \
+ gst-plugin-esd \
+ gst-plugin-typefindfunctions \
+ gst-plugin-decodebin \
+ gst-plugin-volume"
+RRECOMMENDS = "gst-plugin-mad \
+ gst-plugin-modplug \
+ gst-plugin-ivorbis \
+ gst-plugin-tcp"
+
+PV = "0.1+svn${SRCDATE}"
+
+
+inherit gpe autotools
+
+SRC_URI = "${GPE_EXTRA_SVN}"
+
+S = "${WORKDIR}/${PN}"
#!/bin/sh
-
#
# rc This file is responsible for starting/stopping
# services when the runlevel changes.
startup_progress() {
step=$(($step + $step_change))
-
- if [ $(($num_steps + $first_step)) -lt 1 ]; then
- num_steps="1"
- first_step="0"
+ if [ "$num_steps" != "0" ]; then
+ progress=$((($step * $progress_size / $num_steps) + $first_step))
+ else
+ progress=$progress_size
fi
-
- progress=$(($step * $progress_size / $num_steps + $first_step))
+ #echo "PROGRESS is $progress $runlevel $first_step + ($step of $num_steps) $step_change $progress_size"
if type psplash-write >/dev/null 2>&1; then
TMPDIR=/mnt/.psplash psplash-write "PROGRESS $progress" || true
fi
case "$runlevel" in
0|6)
- # Count down from 0 to -100 and use the entire bar
- first_step=0
+ # Count down from -100 to 0 and use the entire bar
+ first_step=-100
progress_size=100
- step_change=-1
+ step_change=1
;;
S)
# Begin where the initramfs left off and use 2/3
;;
esac
+ num_steps=0
+ for s in /etc/rc$runlevel.d/[SK]*; do
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ gdm|xdm|kdm|reboot|halt)
+ break
+ ;;
+ esac
+ num_steps=$(($num_steps + 1))
+ done
+ step=0
+
# First, run the KILL scripts.
if [ $previous != N ]
then
done
fi
- num_steps=0
- for s in /etc/rc$runlevel.d/[SK]*; do
- case "${s##/etc/rc$runlevel.d/S??}" in
- gdm|xdm|kdm|reboot|halt)
- break
- ;;
- esac
- num_steps=$(($num_steps + 1))
- done
-
- step=0
-
# Now run the START scripts for this runlevel.
for i in /etc/rc$runlevel.d/S*
do
done
fi
-if [ "x$runlevel" != "xS" ]; then
- if type psplash-write >/dev/null 2>&1; then
- TMPDIR=/mnt/.psplash psplash-write "QUIT" || true
- umount /mnt/.psplash
- fi
-fi
+#Uncomment to cause psplash to exit manually, otherwise it exits when it sees a VC switch
+#if [ "x$runlevel" != "xS" ]; then
+# if type psplash-write >/dev/null 2>&1; then
+# TMPDIR=/mnt/.psplash psplash-write "QUIT" || true
+# umount /mnt/.psplash
+# fi
+#fi
SECTION = "base"
LICENSE = "GPL"
HOMEPAGE = "http://freshmeat.net/projects/sysvinit/"
-PR = "r33"
+PR = "r34"
# USE_VT and SERIAL_CONSOLE are generally defined by the MACHINE .conf.
# Set PACKAGE_ARCH appropriately.
DESCRIPTION = "Merge machine and distro options to create a basic machine task/package"
-PR = "r21"
+PR = "r20"
PACKAGES = "task-base \
task-base-oh-minimal \
# irda
# pci
# pcmcia
+# redboot
+# uboot
# usbgadget
# usbhost
+
DISTRO_CORE_PACKAGE ?= "task-base-core-default"
#
${@base_contains("COMBINED_FEATURES", "usbhost", "${task-base-usbhost-rdepends}", "",d)} \
${@base_contains("COMBINED_FEATURES", "bluetooth", "${task-base-bluetooth-rdepends}", "",d)} \
${@base_contains("COMBINED_FEATURES", "wifi", "${task-distro-wifi-rdepends}", "",d)} \
+ ${@base_contains("COMBINED_FEATURES", "uboot", "${task-base-uboot-rdepends}", "",d)} \
+ ${@base_contains("COMBINED_FEATURES", "redboot", "${task-base-redboot-rdepends}", "",d)} \
${@base_contains("DISTRO_FEATURES", "nfs", "${task-distro-nfs-rdepends}", "",d)} \
${@base_contains("DISTRO_FEATURES", "ipsec", "${task-distro-ipsec-rdepends}", "",d)} \
${@base_contains("DISTRO_FEATURES", "ppp", "${task-distro-ppp-rdepends}", "",d)} \
+ ${@base_contains("DISTRO_FEATURES", "raid", "${task-distro-raid-rdepends}", "",d)} \
${MACHINE_ESSENTIAL_EXTRA_RDEPENDS} \
${MACHINE_EXTRA_RDEPENDS} \
${DISTRO_EXTRA_RDEPENDS}"
kernel-module-usbserial \
kernel-module-usb-storage "
+task-base-uboot-rdepends = "\
+ uboot-utils"
+
+task-base-redboot-rdepends = "\
+ fis"
+
task-distro-ppp-rdepends = "\
ppp \
ppp-dialin"
kernel-module-lockd \
kernel-module-sunrpc"
+task-distro-raid-rdepends = "\
+ "
# Tosort
# kernel-module-ipv6
LICENSE = "MIT"
PROVIDES = "task-openmoko-everything"
-PR = "r32"
+PR = "r33"
PACKAGES = "\
task-openmoko-linux \
matchbox-stroke \
matchbox-config-gtk \
matchbox-panel-2-applets \
- matchbox-panel-hacks \
matchbox-themes-extra \
matchbox-themes-gtk \
- matchbox-applet-inputmanager \
- matchbox-applet-startup-monitor \
openmoko-panel-battery \
openmoko-panel-clock \
openmoko-panel-demo \
LICENSE = "MIT"
PROVIDES = "task-opie-everything"
-PR = "r5"
+PR = "r6"
PACKAGES = "task-opie-applets task-opie-apps task-opie-base \
task-opie-base-applets task-opie-base-apps \
#
# Dependencies to get the launcher up and running
#
-RDEPENDS_task-opie-base = "opie-alarm opie-qcop opie-quicklauncher opie-taskbar \
+RDEPENDS_task-opie-base = "opie-init opie-alarm opie-qcop opie-quicklauncher opie-taskbar \
opie-pics opie-sounds opie-freetype ttf-dejavu-sans \
ttf-dejavu-sans-mono"
+++ /dev/null
-# Configuration file for fw_(printenv/saveenv) utility.
-# Up to two entries are valid, in this case the redundand
-# environment sector is assumed present.
-
-# MTD device name Device offset Env. size Flash sector size
-
-# Primary U-Boot environment. You shouldn't need to touch this. If you touch this,
-# you should be *very* sure about what you're doing if you don't have a serial
-# cable attached!
-# /dev/mtd4 0x00000 0x20000 0x20000
-
-# Secondary U-Boot environment. This is a *bit* more safe to modify, but can easily
-# render your turbostation unbootable!
-
-/dev/mtd5 0x00000 0x20000 0x20000
\ No newline at end of file
--- /dev/null
+DESCRIPTION = "U-boot bootloader OS env. access tools for PPC"
+SECTION = "bootloaders"
+PRIORITY = "optional"
+LICENSE = "GPL"
+DEPENDS = "mtd-utils"
+PR = "r5"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/u-boot/u-boot-${PV}.tar.bz2 \
+ file://fw_env.c.patch;patch=1 \
+ file://tools-Makefile.patch;patch=1 \
+ file://env-Makefile.patch;patch=1 \
+ file://fw_env.config"
+
+S = "${WORKDIR}/u-boot-${PV}"
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
+TARGET_LDFLAGS = ""
+
+UBOOT_MACHINE ?= "${MACHINE}_config"
+
+inherit base
+
+do_configure() {
+ :
+}
+
+do_compile () {
+ oe_runmake Sandpoint8240_config
+ oe_runmake tools
+}
+
+# install mkimage for the kernel makefile
+do_stage() {
+ install -d ${STAGING_BINDIR_NATIVE}
+ install -m 755 ${S}/tools/mkimage ${STAGING_BINDIR_NATIVE}/
+}
+
+do_install () {
+ install -d ${D}/sbin
+ install -d ${D}${sysconfdir}
+ install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
+ install -m 755 ${S}/tools/env/fw_printenv ${D}/sbin/fw_printenv
+ install -m 755 ${S}/tools/env/fw_printenv ${D}/sbin/fw_setenv
+}
DESCRIPTION = "X Composite extension library."
LICENSE= "BSD-X"
-DEPENDS += " compositeproto virtual/libx11 libxfixes"
+DEPENDS += " compositeproto virtual/libx11 libxfixes libxext"
PROVIDES = "xcomposite"
XORG_PN = "libXcomposite"
--- /dev/null
+DESCRIPTION = "X autotools macros"
+SECTION = "x11/libs"
+LICENSE= "Xorg"
+
+SRC_URI = "${XORG_MIRROR}/individual/util/util-macros-1.1.5.tar.bz2 \
+ file://unbreak_cross_compile.patch;patch=1 "
+
+S = "${WORKDIR}/util-macros-1.1.5"
+
+inherit native autotools pkgconfig
+
MESA_VER ?= "6.5"
DEPENDS = "fontconfig freetype flex-native lbxutil kbproto \
-xf86driproto drm glproto randrproto renderproto fixesproto damageproto \
+xf86driproto libdrm glproto randrproto renderproto fixesproto damageproto \
xcmiscproto xextproto xproto xf86miscproto xf86vidmodeproto xf86bigfontproto \
scrnsaverproto bigreqsproto resourceproto fontsproto inputproto \
xf86dgaproto videoproto compositeproto trapproto recordproto dmxproto \
Index: xorg-server-1.2.0/mi/miinitext.c
===================================================================
---- xorg-server-1.2.0.orig/mi/miinitext.c 2007-03-29 11:32:40.000000000 +0200
-+++ xorg-server-1.2.0/mi/miinitext.c 2007-03-29 11:33:22.000000000 +0200
+--- xorg-server-1.2.0.orig/mi/miinitext.c 2007-01-23 06:39:17.000000000 +0100
++++ xorg-server-1.2.0/mi/miinitext.c 2007-03-30 11:28:44.000000000 +0200
@@ -372,6 +372,9 @@
#ifdef DMXEXT
extern void DMXExtensionInit(INITARGS);
}
void
+Index: xorg-server-1.2.0/include/kdrive-config.h.in
+===================================================================
+--- xorg-server-1.2.0.orig/include/kdrive-config.h.in 2007-03-30 11:31:07.000000000 +0200
++++ xorg-server-1.2.0/include/kdrive-config.h.in 2007-03-30 11:34:09.000000000 +0200
+@@ -22,6 +22,9 @@
+ /* Support tslib touchscreen abstraction library */
+ #undef TSLIB
+
++/* Build XCalibrate extension */
++#undef XCALIBRATE
++
+ /* Verbose debugging output hilarity */
+ #undef DEBUG
+
+Index: xorg-server-1.2.0/configure.ac
+===================================================================
+--- xorg-server-1.2.0.orig/configure.ac 2007-03-30 12:47:25.000000000 +0200
++++ xorg-server-1.2.0/configure.ac 2007-03-30 12:39:01.000000000 +0200
+@@ -1540,7 +1540,7 @@
+ ;;
+ esac
+ KDRIVE_STUB_LIB='$(top_builddir)/hw/kdrive/src/libkdrivestubs.a'
+- KDRIVE_LIBS="$DIX_LIB $KDRIVE_LIB $KDRIVE_OS_LIB $KDRIVE_PURE_LIBS $KDRIVE_STUB_LIB $TSLIB_LIBS"
++ KDRIVE_LIBS="$DIX_LIB $KDRIVE_LIB $KDRIVE_PURE_LIBS $KDRIVE_OS_LIB $KDRIVE_STUB_LIB $TSLIB_LIBS"
+
+ # check if we can build Xephyr
+ PKG_CHECK_MODULES(XEPHYR, x11 xext xfont xau xdmcp, [xephyr="yes"], [xephyr="no"])
DEPENDS += "libxkbfile libxcalibrate"
PE = "1"
-PR = "r2"
+PR = "r4"
SRC_URI = "${XORG_MIRROR}/individual/xserver/xorg-server-${PV}.tar.bz2 \
${KDRIVE_COMMON_PATCHES} \
+++ /dev/null
-diff -ru xournal-0.2/configure.in xournal-0.2.noprint/configure.in
---- xournal-0.2/configure.in 2006-01-29 22:25:10.000000000 +0000
-+++ xournal-0.2.noprint/configure.in 2006-03-17 13:08:01.000000000 +0000
-@@ -10,11 +10,16 @@
- AM_PROG_CC_STDC
- AC_HEADER_STDC
-
--pkg_modules="gtk+-2.0 >= 2.4.0 libgnomecanvas-2.0 >= 2.4.0 libgnomeprintui-2.2 >= 2.0.0"
-+pkg_modules="gtk+-2.0 >= 2.4.0 libgnomecanvas-2.0 >= 2.4.0"
- PKG_CHECK_MODULES(PACKAGE, [$pkg_modules])
- AC_SUBST(PACKAGE_CFLAGS)
- AC_SUBST(PACKAGE_LIBS)
-
-+#PKG_CHECK_MODULES(GNOMEPRINT, libgnomeprintui-2.2 >= 2.0.0
-+#AC_SUBST(GNOMEPRINT_CFLAGS)
-+#AC_SUBST(GNOMEPRINT_LIBS)
-+AM_CONDITIONAL(ENABLE_PRINTING, false)
-+
- AC_OUTPUT([
- Makefile
- src/Makefile
-diff -ru xournal-0.2/src/main.c xournal-0.2.noprint/src/main.c
---- xournal-0.2/src/main.c 2006-01-29 22:22:52.000000000 +0000
-+++ xournal-0.2.noprint/src/main.c 2006-03-17 13:14:50.000000000 +0000
-@@ -28,7 +28,9 @@
-
- void hide_unimplemented(void)
- {
-+#if ENABLE_PRINTING
- gtk_widget_hide(GET_COMPONENT("filePrintOptions"));
-+#endif
- gtk_widget_hide(GET_COMPONENT("journalFlatten"));
- gtk_widget_hide(GET_COMPONENT("papercolorOther"));
- gtk_widget_hide(GET_COMPONENT("journalApplyAllPages"));
-diff -ru xournal-0.2/src/Makefile.am xournal-0.2.noprint/src/Makefile.am
---- xournal-0.2/src/Makefile.am 2005-12-14 20:54:42.000000000 +0000
-+++ xournal-0.2.noprint/src/Makefile.am 2006-03-17 13:07:47.000000000 +0000
-@@ -7,12 +7,16 @@
-
- bin_PROGRAMS = xournal
-
-+if ENABLE_PRINTING
-+PRINT_SOURCE = xo-print.c xo-print.h
-+endif
-+
- xournal_SOURCES = \
- main.c xournal.h \
- xo-misc.c xo-misc.h \
- xo-file.c xo-file.h \
- xo-paint.c xo-paint.h \
-- xo-print.c xo-print.h \
-+ $(PRINT_SOURCE) \
- xo-support.c xo-support.h \
- xo-interface.c xo-interface.h \
- xo-callbacks.c xo-callbacks.h
-diff -ru xournal-0.2/src/xo-callbacks.c xournal-0.2.noprint/src/xo-callbacks.c
---- xournal-0.2/src/xo-callbacks.c 2006-01-29 19:39:22.000000000 +0000
-+++ xournal-0.2.noprint/src/xo-callbacks.c 2006-03-17 13:12:01.000000000 +0000
-@@ -7,7 +7,9 @@
- #include <gtk/gtk.h>
- #include <libgnomecanvas/libgnomecanvas.h>
- #include <time.h>
-+#if ENABLE_PRINTING
- #include <libgnomeprintui/gnome-print-dialog.h>
-+#endif
- #include <glib/gstdio.h>
-
- #include "xournal.h"
-@@ -17,7 +19,9 @@
- #include "xo-misc.h"
- #include "xo-file.h"
- #include "xo-paint.h"
-+#if ENABLE_PRINTING
- #include "xo-print.h"
-+#endif
-
- void
- on_fileNew_activate (GtkMenuItem *menuitem,
-@@ -261,7 +265,7 @@
-
- }
-
--
-+#if ENABLE_PRINTING
- void
- on_filePrint_activate (GtkMenuItem *menuitem,
- gpointer user_data)
-@@ -407,7 +411,7 @@
-
- g_free(filename);
- }
--
-+#endif
-
- void
- on_fileQuit_activate (GtkMenuItem *menuitem,
-diff -ru xournal-0.2/src/xo-callbacks.h xournal-0.2.noprint/src/xo-callbacks.h
---- xournal-0.2/src/xo-callbacks.h 2006-01-26 20:47:00.000000000 +0000
-+++ xournal-0.2.noprint/src/xo-callbacks.h 2006-03-17 13:08:45.000000000 +0000
-@@ -24,6 +24,7 @@
- on_filePrintOptions_activate (GtkMenuItem *menuitem,
- gpointer user_data);
-
-+#if ENABLE_PRINTING
- void
- on_filePrint_activate (GtkMenuItem *menuitem,
- gpointer user_data);
-@@ -32,6 +33,8 @@
- on_filePrintPDF_activate (GtkMenuItem *menuitem,
- gpointer user_data);
-
-+#endif
-+
- void
- on_fileQuit_activate (GtkMenuItem *menuitem,
- gpointer user_data);
-diff -ru xournal-0.2/src/xo-interface.c xournal-0.2.noprint/src/xo-interface.c
---- xournal-0.2/src/xo-interface.c 2006-01-29 18:58:25.000000000 +0000
-+++ xournal-0.2.noprint/src/xo-interface.c 2006-03-17 13:11:31.000000000 +0000
-@@ -41,10 +41,12 @@
- GtkWidget *fileSave;
- GtkWidget *fileSaveAs;
- GtkWidget *separator1;
-+#if ENABLE_PRINTING
- GtkWidget *filePrintOptions;
- GtkWidget *image501;
- GtkWidget *filePrint;
- GtkWidget *filePrintPDF;
-+#endif
- GtkWidget *separator2;
- GtkWidget *fileQuit;
- GtkWidget *menuEdit;
-@@ -327,6 +329,7 @@
- gtk_container_add (GTK_CONTAINER (menuFile_menu), separator1);
- gtk_widget_set_sensitive (separator1, FALSE);
-
-+#if ENABLE_PRINTING
- filePrintOptions = gtk_image_menu_item_new_with_mnemonic ("Print Options");
- gtk_widget_show (filePrintOptions);
- gtk_container_add (GTK_CONTAINER (menuFile_menu), filePrintOptions);
-@@ -347,6 +350,7 @@
- gtk_widget_show (separator2);
- gtk_container_add (GTK_CONTAINER (menuFile_menu), separator2);
- gtk_widget_set_sensitive (separator2, FALSE);
-+#endif
-
- fileQuit = gtk_image_menu_item_new_from_stock ("gtk-quit", accel_group);
- gtk_widget_show (fileQuit);
-@@ -1522,6 +1526,7 @@
- g_signal_connect ((gpointer) fileSaveAs, "activate",
- G_CALLBACK (on_fileSaveAs_activate),
- NULL);
-+#if ENABLE_PRINTING
- g_signal_connect ((gpointer) filePrintOptions, "activate",
- G_CALLBACK (on_filePrintOptions_activate),
- NULL);
-@@ -1531,6 +1536,7 @@
- g_signal_connect ((gpointer) filePrintPDF, "activate",
- G_CALLBACK (on_filePrintPDF_activate),
- NULL);
-+#endif
- g_signal_connect ((gpointer) fileQuit, "activate",
- G_CALLBACK (on_fileQuit_activate),
- NULL);
-@@ -1941,11 +1947,13 @@
- GLADE_HOOKUP_OBJECT (winMain, fileSave, "fileSave");
- GLADE_HOOKUP_OBJECT (winMain, fileSaveAs, "fileSaveAs");
- GLADE_HOOKUP_OBJECT (winMain, separator1, "separator1");
-+#if ENABLE_PRINTING
- GLADE_HOOKUP_OBJECT (winMain, filePrintOptions, "filePrintOptions");
- GLADE_HOOKUP_OBJECT (winMain, image501, "image501");
- GLADE_HOOKUP_OBJECT (winMain, filePrint, "filePrint");
- GLADE_HOOKUP_OBJECT (winMain, filePrintPDF, "filePrintPDF");
- GLADE_HOOKUP_OBJECT (winMain, separator2, "separator2");
-+#endif
- GLADE_HOOKUP_OBJECT (winMain, fileQuit, "fileQuit");
- GLADE_HOOKUP_OBJECT (winMain, menuEdit, "menuEdit");
- GLADE_HOOKUP_OBJECT (winMain, menuEdit_menu, "menuEdit_menu");
--- /dev/null
+[Desktop Entry]
+Version=0.3.3
+Type=Application
+Name=Xournal
+Comment=Notetaking tool
+Exec=/usr/bin/xournal
+Icon=/usr/share/xournal/pixmaps/xournal.png
+Terminal=false
+
+++ /dev/null
-HOMEPAGE = "http://xournal.sf.net/"
-DESCRIPTION = "Xournal is an application for notetaking, sketching, keeping a journal using a stylus."
-DEPENDS = "gtk+ libgnomecanvas"
-SECTION = "x11"
-LICENSE = "GPL"
-PR = "r1"
-
-SRC_URI = "http://xournal.sourceforge.net/xournal-0.2.tar.gz \
- file://no-printing.diff;patch=1"
-
-inherit autotools pkgconfig
+++ /dev/null
-HOMEPAGE = "http://xournal.sf.net/"
-DESCRIPTION = "Xournal is an application for notetaking, sketching, keeping a journal using a stylus."
-DEPENDS = "gtk+ libgnomecanvas"
-SECTION = "x11"
-LICENSE = "GPL"
-PR = "r0"
-
-SRC_URI = "http://xournal.sourceforge.net/xournal-0.3.1.tar.gz \
- "
-
-inherit autotools pkgconfig
--- /dev/null
+HOMEPAGE = "http://xournal.sf.net/"
+DESCRIPTION = "Xournal is an application for notetaking, sketching, keeping a journal using a stylus."
+DEPENDS = "gtk+ libgnomecanvas libgnomeprintui"
+SECTION = "x11"
+LICENSE = "GPL"
+PR = "r0"
+
+SRC_URI = "http://xournal.sourceforge.net/xournal-${PV}.tar.gz \
+ file://xournal.desktop"
+
+inherit autotools pkgconfig
+
+do_install_append () {
+ install -d ${D}${datadir}/applications/
+ install -m 0644 ${WORKDIR}/xournal.desktop ${D}${datadir}/applications/
+}
+
projects / vuplus_openembedded / commitdiff