reenoo@sugarcube.dyndns.org
rjt@bob.cambridgebroadband.com
rjt@flotta.cambridgebroadband.com
+root@tim.rpsys.net
roy@rant-central.com
rwhitby@home.(none)
schurig@mnz66.mn-logistik.de
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_ADIFCC is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE_PB is not set
-CONFIG_SHARP_LOCOMO=y
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_ADSBITSY is not set
-# CONFIG_SA1100_BRUTUS is not set
-# CONFIG_SA1100_CERF is not set
-CONFIG_SA1100_COLLIE=y
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
-# CONFIG_SA1100_EXTENEX1 is not set
-# CONFIG_SA1100_FLEXANET is not set
-# CONFIG_SA1100_FREEBIRD is not set
-# CONFIG_SA1100_GRAPHICSCLIENT is not set
-# CONFIG_SA1100_GRAPHICSMASTER is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_HUW_WEBPANEL is not set
-# CONFIG_SA1100_ITSY is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_NANOENGINE is not set
-# CONFIG_SA1100_OMNIMETER is not set
-# CONFIG_SA1100_PANGOLIN is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_PT_SYSTEM3 is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SHERMAN is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_PFS168 is not set
-# CONFIG_SA1100_VICTOR is not set
-# CONFIG_SA1100_XP860 is not set
-# CONFIG_SA1100_YOPY is not set
-# CONFIG_SA1100_STORK is not set
-# CONFIG_SA1100_SSP is not set
-# CONFIG_SA1100_USB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# General setup
-#
-CONFIG_DISCONTIGMEM=y
-CONFIG_ISA=y
-# CONFIG_ZBOOT_ROM is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-# CONFIG_CPU_FREQ is not set
-
-#
-# PCMCIA/CardBus support
-#
-CONFIG_PCMCIA=y
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_SA1100=y
-
-#
-# At least one math emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Generic Driver Options
-#
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-CONFIG_PM=y
-CONFIG_PREEMPT=y
-CONFIG_APM=y
-# CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2"
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_OBSOLETE_CHIPS=y
-# CONFIG_MTD_AMDSTD is not set
-CONFIG_MTD_SHARP=y
-# CONFIG_MTD_JEDEC is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_LOCOMO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
-CONFIG_I2C_ISA=m
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_SCx200_ACB is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-# CONFIG_JFFS2_FS_NAND is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_EXPORTFS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# Misc devices
-#
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-CONFIG_USB_GADGET_SA1100=y
-CONFIG_USB_SA1100=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# Kernel hacking
-#
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_WAITQ is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_ADIFCC is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_PXA25x=y
-# CONFIG_PXA27x is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SHARK is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-
-#
-# Epxa10db
-#
-
-#
-# Footbridge Implementations
-#
-
-#
-# IOP3xx Implementation Options
-#
-# CONFIG_ARCH_IOP310 is not set
-# CONFIG_ARCH_IOP321 is not set
-
-#
-# IOP3xx Chipset Features
-#
-
-#
-# Intel PXA250/210 Implementations
-#
-#
-# Intel PXA250/210 Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_PXA_CERF is not set
-# CONFIG_COTULLA_DMA is not set
-# CONFIG_SABINAL_DISCOVERY is not set
-# CONFIG_ARCH_SABINAL is not set
-# CONFIG_ARCH_PXA_POODLE is not set
-# CONFIG_POODLE_TR0 is not set
-CONFIG_ARCH_PXA_CORGI=y
-# CONFIG_MACH_CORGI is not set
-CONFIG_MACH_HUSKY=y
-# CONFIG_CORGI_TR0 is not set
-CONFIG_CORGI_LCD_BUFF=y
-# CONFIG_ARCH_PXA_SHEPHERD is not set
-CONFIG_ARCH_PXA_HUSKY=y
-# CONFIG_ARCH_PXA_BOXER is not set
-CONFIG_ARCH_SHARP_SL=y
-CONFIG_SL_CCCR_CHANGE=y
-CONFIG_SL_CCCR242=y
-
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_ADSBITSY is not set
-# CONFIG_SA1100_BRUTUS is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
-# CONFIG_SA1100_EXTENEX1 is not set
-# CONFIG_SA1100_FLEXANET is not set
-# CONFIG_SA1100_FREEBIRD is not set
-# CONFIG_SA1100_GRAPHICSCLIENT is not set
-# CONFIG_SA1100_GRAPHICSMASTER is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_HUW_WEBPANEL is not set
-# CONFIG_SA1100_ITSY is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_NANOENGINE is not set
-# CONFIG_SA1100_OMNIMETER is not set
-# CONFIG_SA1100_PANGOLIN is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_PT_SYSTEM3 is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SHERMAN is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_PFS168 is not set
-# CONFIG_SA1100_VICTOR is not set
-# CONFIG_SA1100_XP860 is not set
-# CONFIG_SA1100_YOPY is not set
-# CONFIG_SA1100_STORK is not set
-# CONFIG_SA1100_SSP is not set
-# CONFIG_SA1100_USB is not set
-
-#
-# Processor Type
-#
-# CONFIG_CPU_32v3 is not set
-# CONFIG_CPU_32v4 is not set
-# CONFIG_CPU_ARM610 is not set
-# CONFIG_CPU_ARM710 is not set
-# CONFIG_CPU_ARM720T is not set
-# CONFIG_CPU_ARM920T is not set
-# CONFIG_CPU_ARM922T is not set
-# CONFIG_PLD is not set
-# CONFIG_CPU_ARM926T is not set
-# CONFIG_CPU_ARM1020 is not set
-# CONFIG_CPU_SA110 is not set
-# CONFIG_CPU_SA1100 is not set
-CONFIG_CPU_32=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_XSCALE=y
-
-CONFIG_SPU_ABRT_EV5T=y
-CONFIG_CPU_TLB_v4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-
-##### CONFIG_BATT=y
-# CONFIG_XSCALE_CACHE_ERRATA is not set
-##### CONFIG_ARM_THUMB=y
-##### CONFIG_ARM_FCSE=y
-# CONFIG_DISCONTIGMEM is not set
-##### CONFIG_PREEMPT=y
-##### CONFIG_LOCK_BREAK=y
-
-#
-# Processor Features
-#
-
-#
-# General setup
-#
-CONFIG_DISCONTIGMEM=y
-CONFIG_ISA=y
-# CONFIG_ZBOOT_ROM is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-# CONFIG_CPU_FREQ is not set
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# At least one math emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# above was not set
-# CONFIG_FPE_FASTFPE is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Generic Driver Options
-#
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-CONFIG_PM=y
-CONFIG_PREEMPT=y
-CONFIG_APM=y
-# CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="console=ttyS0,9600n8 console=tty0 noinitrd root=/dev/mtdblock4 rootfstype=jffs2"
-
-# CONFIG_CMDLINE="console=null root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),25600k@7168k(root),-(home) jffs2_orphaned_inodes=delete rootfstype=jffs2"
-# CONFIG_CMDLINE="root=/dev/mtdblock4 rootfstype=jffs2 jffs2_orphaned_inodes=delete console=null mem=16M"
-
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-#CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_GEN_PROBE is not set
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-#### CONFIG_MTD_SHARP_SL=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-####CONFIG_MTD_NAND=y
-####CONFIG_MTD_NAND_ECC=y
-####CONFIG_MTD_NAND_VERIFY_WRITE=y
-####CONFIG_MTD_NAND_POST_BADBLOCK=y
-# CONFIG_MTD_NAND_ERASE_BY_FORCE is not set
-####CONFIG_MTD_NAND_LOGICAL_ADDRESS_ACCESS=y
-####CONFIG_MTD_NAND_PAGE_CACHE=y
-####CONFIG_MTD_NAND_SHARP_SL_CORGI=y
-####CONFIG_MTD_NAND_SHARP_SL=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETDEVICES is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=640
-CONFIG_INPUT_TSDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SHARP_LOCOMO=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-
-# CONFIG_KEYBOARD_COLLIE is not set
-
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SL7X0_POWER_KEY_OFF=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_SA1100 is not set
-# CONFIG_SERIAL_SA1100_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
-CONFIG_I2C_ISA=m
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_SCx200_ACB is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-# CONFIG_JFFS2_FS_NAND is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_EXPORTFS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Graphics support
-#
-####CONFIG_FB=y
-####CONFIG_FB_CORGI=y
-####CONFIG_SL_SYSCLK100=y
-# CONFIG_FB_SA1100 is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
-
-# BJL - Check these out later
-#CONFIG_FBCON_CFB16=y
-#CONFIG_FBCON_ADVANCED=y
-#CONFIG_FBCON_ROTATE_R=y
-
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_SOUND=y
-# CONFIG_SOUND_CORGI=y
-
-#
-# Misc devices
-#
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_SA1100 is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# Kernel hacking
-#
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_WAITQ is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
-diff -uNr linux-2.6.5-orig/arch/arm/Kconfig linux-2.6.5/arch/arm/Kconfig
---- linux-2.6.5-orig/arch/arm/Kconfig 2004-06-14 20:31:51.000000000 +0100
-+++ linux-2.6.5/arch/arm/Kconfig 2004-06-14 20:33:06.000000000 +0100
-@@ -500,7 +500,7 @@
-
- config LEDS
- bool "Timer and CPU usage LEDs"
-- depends on ARCH_NETWINDER || ARCH_EBSA110 || ARCH_EBSA285 || ARCH_FTVPCI || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || ARCH_INTEGRATOR || ARCH_CDB89712 || ARCH_P720T
-+ depends on ARCH_NETWINDER || ARCH_EBSA110 || ARCH_EBSA285 || ARCH_FTVPCI || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || MACH_HUSKY || ARCH_INTEGRATOR || ARCH_CDB89712 || ARCH_P720T
- help
- If you say Y here, the LEDs on your machine will be used
- to provide useful information about your current system status.
-@@ -513,8 +513,8 @@
- system, but the driver will do nothing.
-
- config LEDS_TIMER
-- bool "Timer LED" if LEDS && (ARCH_NETWINDER || ARCH_EBSA285 || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || ARCH_INTEGRATOR || ARCH_P720T)
-- depends on ARCH_NETWINDER || ARCH_EBSA110 || ARCH_EBSA285 || ARCH_FTVPCI || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || ARCH_INTEGRATOR || ARCH_CDB89712 || ARCH_P720T
-+ bool "Timer LED" if LEDS && (ARCH_NETWINDER || ARCH_EBSA285 || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || MACH_HUSKY || ARCH_INTEGRATOR || ARCH_P720T)
-+ depends on ARCH_NETWINDER || ARCH_EBSA110 || ARCH_EBSA285 || ARCH_FTVPCI || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || MACH_HUSKY || ARCH_INTEGRATOR || ARCH_CDB89712 || ARCH_P720T
- default y if ARCH_EBSA110
- help
- If you say Y here, one of the system LEDs (the green one on the
-@@ -529,7 +529,7 @@
-
- config LEDS_CPU
- bool "CPU usage LED"
-- depends on LEDS && (ARCH_NETWINDER || ARCH_EBSA285 || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || ARCH_INTEGRATOR || ARCH_P720T)
-+ depends on LEDS && (ARCH_NETWINDER || ARCH_EBSA285 || ARCH_SHARK || ARCH_CO285 || ARCH_SA1100 || ARCH_LUBBOCK || ARCH_PXA_IDP || MACH_POODLE || MACH_HUSKY || ARCH_INTEGRATOR || ARCH_P720T)
- help
- If you say Y here, the red LED will be used to give a good real
- time indication of CPU usage, by lighting whenever the idle task
-diff -uNr linux-2.6.5-orig/arch/arm/Makefile linux-2.6.5/arch/arm/Makefile
---- linux-2.6.5-orig/arch/arm/Makefile 2004-06-14 20:31:51.000000000 +0100
-+++ linux-2.6.5/arch/arm/Makefile 2004-06-14 20:33:06.000000000 +0100
-@@ -54,8 +54,8 @@
- tune-$(CONFIG_CPU_V6) :=-mtune=strongarm
-
- # Need -Uarm for gcc < 3.x
--CFLAGS +=-mapcs-32 $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Wa,-mno-fpu -Uarm
--AFLAGS +=-mapcs-32 $(arch-y) $(tune-y) -msoft-float -Wa,-mno-fpu
-+CFLAGS +=-mapcs-32 $(arch-y) $(tune-y) -malignment-traps -msoft-float
-+AFLAGS +=-mapcs-32 $(arch-y) $(tune-y) -msoft-float
-
- #Default value
- DATAADDR := .
-diff -uNr linux-2.6.5-orig/arch/arm/boot/compressed/Makefile linux-2.6.5/arch/arm/boot/compressed/Makefile
---- linux-2.6.5-orig/arch/arm/boot/compressed/Makefile 2004-06-14 20:31:52.000000000 +0100
-+++ linux-2.6.5/arch/arm/boot/compressed/Makefile 2004-06-14 20:33:06.000000000 +0100
-@@ -55,14 +55,18 @@
- OBJS += head-xscale.o
- endif
-
-+ifeq ($(CONFIG_DEBUG_ICEDCC),y)
-+OBJS += ice-dcc.o
-+endif
-+
- SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/LOAD_ADDR/$(ZRELADDR)/;s/BSS_START/$(ZBSSADDR)/
-
- targets := vmlinux vmlinux.lds piggy piggy.gz piggy.o \
- font.o head.o $(OBJS)
- EXTRA_CFLAGS := -fpic
--EXTRA_AFLAGS := -traditional
-+EXTRA_AFLAGS :=
-
--LDFLAGS_vmlinux := -p -X \
-+LDFLAGS_vmlinux := -p --no-undefined -X \
- $(shell $(CC) $(CFLAGS) --print-libgcc-file-name) -T
-
- $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
-diff -uNr linux-2.6.5-orig/arch/arm/boot/compressed/head-xscale.S linux-2.6.5/arch/arm/boot/compressed/head-xscale.S
---- linux-2.6.5-orig/arch/arm/boot/compressed/head-xscale.S 2004-06-14 20:31:52.000000000 +0100
-+++ linux-2.6.5/arch/arm/boot/compressed/head-xscale.S 2004-06-14 20:33:06.000000000 +0100
-@@ -52,6 +52,18 @@
- mov r7, #MACH_TYPE_POODLE
- #endif
-
-+#ifdef CONFIG_MACH_CORGI
-+@ mov r7, #MACH_TYPE_CORGI
-+ mov r7, #0xa7
-+ add r7, r7, #0x100
-+#endif
-+
-+#ifdef CONFIG_MACH_HUSKY
-+@ mov r7, #MACH_TYPE_HUSKY
-+ mov r7, #0xde
-+ add r7, r7, #0x100
-+#endif
-+
- #ifdef CONFIG_ARCH_IQ80310
- /*
- * Crank the CPU up to 733MHz
-diff -uNr linux-2.6.5-orig/arch/arm/boot/compressed/head.S linux-2.6.5/arch/arm/boot/compressed/head.S
---- linux-2.6.5-orig/arch/arm/boot/compressed/head.S 2004-06-14 20:31:53.000000000 +0100
-+++ linux-2.6.5/arch/arm/boot/compressed/head.S 2004-06-14 20:33:06.000000000 +0100
-@@ -10,6 +10,8 @@
- #include <linux/config.h>
- #include <linux/linkage.h>
-
-+#define DEBUG 1
-+
- /*
- * Debugging stuff
- *
-@@ -25,6 +27,12 @@
- .macro writeb, rb
- str \rb, [r3, #0x160]
- .endm
-+#elif defined(CONFIG_DEBUG_ICEDCC)
-+ .macro loadsp, rb
-+ .endm
-+ .macro writeb, rb
-+ mcr p14, 0, \rb, c0, c1, 0
-+ .endm
- #elif defined(CONFIG_FOOTBRIDGE)
- .macro loadsp, rb
- mov \rb, #0x7c000000
-@@ -67,6 +75,19 @@
- .macro writeb, rb
- str \rb, [r3, #0x14] @ UTDR
- .endm
-+#elif defined(CONFIG_ARCH_IXP4XX)
-+ .macro loadsp, rb
-+ mov \rb, #0xc8000000
-+ .endm
-+ .macro writeb, rb
-+ str \rb, [r3, #0]
-+#elif defined(CONFIG_ARCH_LH7A40X)
-+ .macro loadsp, rb
-+ ldr \rb, =0x80000700 @ UART2 UARTBASE
-+ .endm
-+ .macro writeb, rb
-+ strb \rb, [r3, #0]
-+ .endm
- #else
- #error no serial architecture defined
- #endif
-@@ -332,11 +353,19 @@
- mov r8, r0, lsr #18
- mov r8, r8, lsl #18 @ start of RAM
- add r9, r8, #0x10000000 @ a reasonable RAM size
-- mov r1, #0x12
-+@#ifdef CONFIG_CPU_XSCALE
-+ mov r1, #0x02
-+@#else
-+@ mov r1, #0x12
-+@#endif
- orr r1, r1, #3 << 10
- add r2, r3, #16384
- 1: cmp r1, r8 @ if virt > start of RAM
-- orrhs r1, r1, #0x0c @ set cacheable, bufferable
-+@#ifdef CONFIG_XSCALE_CACHE_ERRATA
-+ orrhs r1, r1, #0x08 @ set cacheable, not bufferable
-+@#else
-+@ orrhs r1, r1, #0x0c @ set cacheable, bufferable
-+@#endif
- cmp r1, r9 @ if virt > end of RAM
- bichs r1, r1, #0x0c @ clear cacheable, bufferable
- str r1, [r0], #4 @ 1:1 mapping
-diff -uNr linux-2.6.5-orig/arch/arm/boot/compressed/vmlinux.lds.in linux-2.6.5/arch/arm/boot/compressed/vmlinux.lds.in
---- linux-2.6.5-orig/arch/arm/boot/compressed/vmlinux.lds.in 2004-06-14 20:31:53.000000000 +0100
-+++ linux-2.6.5/arch/arm/boot/compressed/vmlinux.lds.in 2004-06-14 20:33:06.000000000 +0100
-@@ -47,7 +47,7 @@
- .bss : { *(.bss) }
- _end = .;
-
-- .stack (NOLOAD) : { *(.stack) }
-+ .stack : { *(.stack) }
-
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
-diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/Kconfig linux-2.6.5/arch/arm/mach-pxa/Kconfig
---- linux-2.6.5-orig/arch/arm/mach-pxa/Kconfig 2004-06-14 20:31:53.000000000 +0100
-+++ linux-2.6.5/arch/arm/mach-pxa/Kconfig 2004-06-14 20:33:06.000000000 +0100
-@@ -13,10 +13,23 @@
- bool "SHARP Poodle"
- depends on ARCH_PXA
-
-+config MACH_CORGI
-+ bool "SHARP Corgi (SL-C700)"
-+ depends on ARCH_PXA
-+
-+config MACH_SHEPHERD
-+ bool "SHARP Shepherd (SL-C750)"
-+ depends on ARCH_PXA
-+
-+config MACH_HUSKY
-+ bool "SHARP Husky (SL-C760)"
-+ depends on ARCH_PXA
-+
- config SHARP_LOCOMO
- bool "SHARP LoCoMo support"
- default Y
-- depends MACH_POODLE
-+ depends MACH_POODLE || MACH_CORGI || MACH_HUSKY
-+
-
- endmenu
-
-diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/Makefile linux-2.6.5/arch/arm/mach-pxa/Makefile
---- linux-2.6.5-orig/arch/arm/mach-pxa/Makefile 2004-06-14 20:31:54.000000000 +0100
-+++ linux-2.6.5/arch/arm/mach-pxa/Makefile 2004-06-14 20:33:06.000000000 +0100
-@@ -9,12 +9,18 @@
- obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
- obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
- obj-$(CONFIG_MACH_POODLE) += poodle.o
-+obj-$(CONFIG_MACH_CORGI) += corgi.o
-+obj-$(CONFIG_MACH_SHEPHERD) += corgi.o
-+obj-$(CONFIG_MACH_HUSKY) += corgi.o
-
- # Support for blinky lights
- led-y := leds.o
- led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
- led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
- led-$(CONFIG_MACH_POODLE) += leds-poodle.o
-+led-$(CONFIG_MACH_CORGI) += leds-corgi.o
-+led-$(CONFIG_MACH_SHEPHERD) += leds-corgi.o
-+led-$(CONFIG_MACH_HUSKY) += leds-corgi.o
-
- obj-$(CONFIG_LEDS) += $(led-y)
-
-diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/corgi.c linux-2.6.5/arch/arm/mach-pxa/corgi.c
---- linux-2.6.5-orig/arch/arm/mach-pxa/corgi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.5/arch/arm/mach-pxa/corgi.c 2004-06-14 20:33:19.000000000 +0100
-@@ -0,0 +1,178 @@
-+/*
-+ * linux/arch/arm/mach-pxa/corgi.c
-+ *
-+ * Support for the SHARP Corgi Board.
-+ *
-+ * Copyright: Lineo Japan Inc.
-+ *
-+ * Based on:
-+ * linux/arch/arm/mach-pxa/lubbock.c
-+ *
-+ * Support for the Intel DBPXA250 Development Platform.
-+ *
-+ * Author: Nicolas Pitre
-+ * Created: Jun 15, 2001
-+ * Copyright: MontaVista Software Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Change Log
-+ * 12-Dec-2002 Sharp Corporation for Corgi
-+ * 01-Apr-2003 Sharp for Shepherd
-+ *
-+ * Mar 10, 2004: Lots of changes to port to 2.6 by John Lenz
-+ *
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/major.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <asm/mach-types.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/irq.h>
-+#include <asm/arch/corgi.h>
-+
-+#include "generic.h"
-+
-+static void __init scoop_init(void)
-+{
-+
-+#define CORGI_SCP_INIT_DATA(adr,dat) (((adr)<<16)|(dat))
-+#define CORGI_SCP_INIT_DATA_END ((unsigned long)-1)
-+ static const unsigned long scp_init[] =
-+ {
-+ CORGI_SCP_INIT_DATA(CORGI_SCP_MCR,0x0140), // 00
-+ CORGI_SCP_INIT_DATA(CORGI_SCP_MCR,0x0100),
-+ CORGI_SCP_INIT_DATA(CORGI_SCP_CDR,0x0000), // 04
-+ CORGI_SCP_INIT_DATA(CORGI_SCP_CPR,0x0000), // 0C
-+ CORGI_SCP_INIT_DATA(CORGI_SCP_CCR,0x0000), // 10
-+ CORGI_SCP_INIT_DATA(CORGI_SCP_IMR,0x0000), // 18
-+ CORGI_SCP_INIT_DATA(CORGI_SCP_IRM,0x00FF), // 14
-+ CORGI_SCP_INIT_DATA(CORGI_SCP_ISR,0x0000), // 1C
-+ CORGI_SCP_INIT_DATA(CORGI_SCP_IRM,0x0000),
-+ CORGI_SCP_INIT_DATA(CORGI_SCP_GPCR,CORGI_SCP_IO_DIR), // 20
-+ CORGI_SCP_INIT_DATA(CORGI_SCP_GPWR,CORGI_SCP_IO_OUT), // 24
-+ CORGI_SCP_INIT_DATA_END
-+ };
-+ int i;
-+ for(i=0; scp_init[i] != CORGI_SCP_INIT_DATA_END; i++)
-+ {
-+ int adr = scp_init[i] >> 16;
-+ CORGI_SCP_REG(adr) = scp_init[i] & 0xFFFF;
-+ }
-+}
-+
-+static void __init corgi_init_irq(void)
-+{
-+ pxa_init_irq();
-+
-+ /* setup extra corgi irqs */
-+
-+ /* i2c initialize */
-+ //i2c_init(); RPP Fixme!
-+
-+ /* scoop initialize */
-+ scoop_init();
-+
-+ /* initialize SSP & CS */
-+ /*pxa_ssp_init();*/
-+}
-+
-+#if 0
-+static void __init
-+fixup_corgi(struct machine_desc *desc, struct param_struct *params,
-+ char **cmdline, struct meminfo *mi)
-+{
-+#if defined(CONFIG_MACH_SHEPHERD) || defined(CONFIG_MACH_HUSKY)
-+ SET_BANK (0, 0xa0000000, 64*1024*1024);
-+#else
-+ SET_BANK (0, 0xa0000000, 32*1024*1024);
-+#endif
-+ mi->nr_banks = 1;
-+#if defined(CONFIG_BLK_DEV_INITRD)
-+ setup_ramdisk (1, 0, 0, 8192);
-+ setup_initrd (__phys_to_virt(0xa1000000), 4*1024*1024);
-+ ROOT_DEV = MKDEV(RAMDISK_MAJOR,0);
-+#elif defined(CONFIG_MTD)
-+ ROOT_DEV = MKDEV(31, 0); /* /dev/mtdblock0 */
-+#endif
-+
-+#ifdef CONFIG_SHARPSL_BOOTLDR_PARAMS
-+ if (params->u1.s.page_size != PAGE_SIZE) {
-+ params->u1.s.page_size = PAGE_SIZE;
-+ params->u1.s.nr_pages = 32 * 1024 * 1024 / PAGE_SIZE;
-+ params->u1.s.ramdisk_size = 0;
-+ params->u1.s.flags = FLAG_READONLY | FLAG_RDLOAD | FLAG_RDPROMPT;
-+ params->u1.s.rootdev = ROOT_DEV;
-+ params->u1.s.initrd_start = 0;
-+ params->u1.s.initrd_size = 0;
-+ params->u1.s.rd_start = 0;
-+ params->u1.s.system_rev = 0;
-+ params->u1.s.system_serial_low = 0;
-+ params->u1.s.system_serial_high = 0;
-+ strcpy(params->commandline, CONFIG_CMDLINE);
-+ }
-+#endif
-+}
-+#endif
-+
-+static struct map_desc corgi_io_desc[] __initdata = {
-+ /* virtual physical length */
-+ { 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE }, /* LCDC (readable for Qt driver) */
-+ { 0xf2000000, 0x10800000, 0x00001000, MT_DEVICE }, /* SCOOP */
-+ { 0xf2100000, 0x0C000000, 0x00001000, MT_DEVICE }, /* Nand Flash */
-+ { 0xef000000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */
-+};
-+
-+static void __init corgi_map_io(void)
-+{
-+ pxa_map_io();
-+ iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc));
-+
-+#if 0
-+ /* This enables the BTUART */
-+ CKEN |= CKEN7_BTUART;
-+ set_GPIO_mode(GPIO42_BTRXD_MD);
-+ set_GPIO_mode(GPIO43_BTTXD_MD);
-+ set_GPIO_mode(GPIO44_BTCTS_MD);
-+ set_GPIO_mode(GPIO45_BTRTS_MD);
-+#endif
-+
-+ /* setup sleep mode values */
-+ PWER = 0x00000002;
-+ PFER = 0x00000000;
-+ PRER = 0x00000002;
-+ PGSR0 = 0x0158C000;
-+ PGSR1 = 0x00FF0080;
-+ PGSR2 = 0x0001C004;
-+ PCFR |= PCFR_OPDE;
-+}
-+
-+#if defined(CONFIG_MACH_SHEPHERD)
-+MACHINE_START(SHEPHERD, "SHARP Shepherd")
-+#elseif defined(CONFIG_MACH_HUSKY)
-+MACHINE_START(HUSKY, "SHARP Husky")
-+#else
-+MACHINE_START(CORGI, "SHARP Corgi")
-+#endif
-+ BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
-+#ifdef CONFIG_SHARPSL_BOOTLDR_PARAMS
-+ BOOT_PARAMS(0xa0000100)
-+#endif
-+/* FIXUP(fixup_corgi)*/
-+ MAPIO(corgi_map_io)
-+ INITIRQ(corgi_init_irq)
-+MACHINE_END
-diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/leds-corgi.c linux-2.6.5/arch/arm/mach-pxa/leds-corgi.c
---- linux-2.6.5-orig/arch/arm/mach-pxa/leds-corgi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.5/arch/arm/mach-pxa/leds-corgi.c 2004-06-14 20:33:19.000000000 +0100
-@@ -0,0 +1,135 @@
-+/*
-+ * linux/arch/arm/mach-pxa/leds-corgi.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Copied from arch/arm/mach-sa1100/leds-collie.c
-+ * ChangeLog:
-+ * - John Lenz <4/27/04> - added support for new locomo device model
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/hardware/locomo.h>
-+#include <asm/leds.h>
-+#include <asm/system.h>
-+
-+#include "leds.h"
-+
-+#define LED_STATE_ENABLED 1
-+#define LED_STATE_CLAIMED 2
-+
-+static struct locomo_dev *locomo_dev = NULL;
-+static unsigned int led_state;
-+static unsigned int hw_led0_state = 0;
-+static unsigned int hw_led1_state = 0;
-+
-+#define LED_ONOFF_MASK (LOCOMO_LPT_TOFL|LOCOMO_LPT_TOFH)
-+#define LED_OFF(REG) ((REG)|=LOCOMO_LPT_TOFL)
-+#define LED_ON(REG) ((REG)=((REG)&~LED_ONOFF_MASK)|LOCOMO_LPT_TOFH)
-+#define LED_FLIP(REG) ((REG)^=LED_ONOFF_MASK)
-+
-+void corgi_leds_event(led_event_t evt)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ switch (evt) {
-+ case led_start:
-+ led_state = LED_STATE_ENABLED;
-+ LED_ON(hw_led0_state);
-+ LED_ON(hw_led1_state);
-+ break;
-+
-+ case led_stop:
-+ led_state &= ~LED_STATE_ENABLED;
-+ break;
-+
-+ case led_claim:
-+ led_state |= LED_STATE_CLAIMED;
-+ LED_ON(hw_led0_state);
-+ LED_ON(hw_led1_state);
-+ break;
-+
-+ case led_release:
-+ led_state &= ~LED_STATE_CLAIMED;
-+ LED_ON(hw_led0_state);
-+ LED_ON(hw_led1_state);
-+ break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+ case led_timer:
-+ if (!(led_state & LED_STATE_CLAIMED)) {
-+ LED_FLIP(hw_led0_state);
-+ }
-+ break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+ case led_idle_start:
-+ /* LED off when system is idle */
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ LED_OFF(hw_led1_state);
-+ break;
-+
-+ case led_idle_end:
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ LED_ON(hw_led1_state);
-+ break;
-+#endif
-+
-+ default:
-+ break;
-+ }
-+
-+
-+ if (locomo_dev && led_state & LED_STATE_ENABLED) {
-+ locomo_writel(hw_led0_state, locomo_dev->mapbase + LOCOMO_LPT0);
-+ locomo_writel(hw_led1_state, locomo_dev->mapbase + LOCOMO_LPT1);
-+ }
-+
-+ local_irq_restore(flags);
-+}
-+
-+static int corgiled_probe(struct locomo_dev *dev) {
-+ /* set up the initial led states, since due to the init order,
-+ * corgi_leds_event(led_start) might have been called before this */
-+ /*if (led_state & LED_STATE_ENABLED) {
-+ //LCM_LPT0 = hw_led0_state;
-+ locomo_writel(hw_led0_state, dev->mapbase + LOCOMO_LPT0);
-+ //LCM_LPT1 = hw_led1_state;
-+ locomo_writel(hw_led1_state, dev->mapbase + LOCOMO_LPT1);
-+ }*/
-+ locomo_dev = dev;
-+ return 0;
-+}
-+
-+static int corgiled_remove(struct locomo_dev *dev) {
-+ locomo_dev = NULL;
-+ return 0;
-+}
-+
-+static struct locomo_driver corgiled_driver = {
-+ .drv = {
-+ .name = "locomoled"
-+ },
-+ .devid = LOCOMO_DEVID_LED,
-+ .probe = corgiled_probe,
-+ .remove = corgiled_remove,
-+};
-+
-+static int __init corgiled_init(void) {
-+ return locomo_driver_register(&corgiled_driver);
-+}
-+
-+device_initcall(corgiled_init);
-+
-+MODULE_AUTHOR("John Lenz <jelenz@wisc.edu>");
-+MODULE_DESCRIPTION("LoCoMo Corgi LED driver");
-+MODULE_LICENSE("GPL");
-diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/leds.c linux-2.6.5/arch/arm/mach-pxa/leds.c
---- linux-2.6.5-orig/arch/arm/mach-pxa/leds.c 2004-06-14 20:31:54.000000000 +0100
-+++ linux-2.6.5/arch/arm/mach-pxa/leds.c 2004-06-14 20:33:06.000000000 +0100
-@@ -24,7 +24,8 @@
- leds_event = idp_leds_event;
- if (machine_is_poodle())
- leds_event = poodle_leds_event;
--
-+ if (machine_is_corgi())
-+ leds_event = corgi_leds_event;
- leds_event(led_start);
- return 0;
- }
-diff -uNr linux-2.6.5-orig/arch/arm/mach-pxa/leds.h linux-2.6.5/arch/arm/mach-pxa/leds.h
---- linux-2.6.5-orig/arch/arm/mach-pxa/leds.h 2004-06-14 20:31:54.000000000 +0100
-+++ linux-2.6.5/arch/arm/mach-pxa/leds.h 2004-06-14 20:33:06.000000000 +0100
-@@ -10,3 +10,4 @@
- extern void lubbock_leds_event(led_event_t evt);
- extern void idp_leds_event(led_event_t evt);
- extern void poodle_leds_event(led_event_t evt);
-+extern void corgi_leds_event(led_event_t evt);
-diff -uNr linux-2.6.5-orig/arch/arm/tools/mach-types linux-2.6.5/arch/arm/tools/mach-types
---- linux-2.6.5-orig/arch/arm/tools/mach-types 2004-06-14 20:31:55.000000000 +0100
-+++ linux-2.6.5/arch/arm/tools/mach-types 2004-06-14 20:33:06.000000000 +0100
-@@ -485,3 +485,4 @@
- vr1000 MACH_VR1000 VR1000 475
- deisterpxa MACH_DEISTERPXA DEISTERPXA 476
- bcm1160 MACH_BCM1160 BCM1160 477
-+husky MACH_HUSKY HUSKY 478
-\ No newline at end of file
-diff -uNr linux-2.6.5-orig/drivers/serial/8250.c linux-2.6.5/drivers/serial/8250.c
---- linux-2.6.5-orig/drivers/serial/8250.c 2004-06-14 20:31:55.000000000 +0100
-+++ linux-2.6.5/drivers/serial/8250.c 2004-06-14 20:33:06.000000000 +0100
-@@ -169,7 +169,8 @@
- { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
- { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
- { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO },
-- { "NS16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO | UART_NATSEMI }
-+ { "NS16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO | UART_NATSEMI },
-+ { "XScale", 32, UART_CLEAR_FIFO | UART_USE_FIFO },
- };
-
- static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
-@@ -1499,6 +1500,8 @@
- up->ier &= ~UART_IER_MSI;
- if (UART_ENABLE_MS(&up->port, termios->c_cflag))
- up->ier |= UART_IER_MSI;
-+ if (up->port.type == PORT_XSCALE)
-+ up->ier |= UART_IER_UUE | UART_IER_RTOIE;
-
- serial_out(up, UART_IER, up->ier);
-
-@@ -1930,7 +1933,11 @@
- * First save the UER then disable the interrupts
- */
- ier = serial_in(up, UART_IER);
-- serial_out(up, UART_IER, 0);
-+
-+ if (up->port.type == PORT_XSCALE)
-+ serial_out(up, UART_IER, UART_IER_UUE);
-+ else
-+ serial_out(up, UART_IER, 0);
-
- /*
- * Now, do each character
-diff -uNr linux-2.6.5-orig/include/asm-arm/arch-pxa/corgi.h linux-2.6.5/include/asm-arm/arch-pxa/corgi.h
---- linux-2.6.5-orig/include/asm-arm/arch-pxa/corgi.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.5/include/asm-arm/arch-pxa/corgi.h 2004-06-14 20:33:19.000000000 +0100
-@@ -0,0 +1,219 @@
-+/*
-+ * linux/include/asm-arm/arch-pxa/corgi.h
-+ *
-+ * (C) Copyright 2001 Lineo Japan, Inc.
-+ *
-+ * May be copied or modified under the terms of the GNU General Public
-+ * License. See linux/COPYING for more information.
-+ *
-+ * Based on:
-+ *
-+ * linux/include/asm-arm/arch-sa1100/collie.h
-+ *
-+ * This file contains the hardware specific definitions for Collie
-+ *
-+ * (C) Copyright 2001 Lineo Japan, Inc.
-+ *
-+ * May be copied or modified under the terms of the GNU General Public
-+ * License. See linux/COPYING for more information.
-+ *
-+ * ChangeLog:
-+ * 04-06-2001 Lineo Japan, Inc.
-+ * 04-16-2001 SHARP Corporation
-+ *
-+ * Mar 10, 2004: Updates to 2.6 by John Lenz
-+ */
-+#ifndef __ASM_ARCH_CORGI_H
-+#define __ASM_ARCH_CORGI_H 1
-+
-+/*
-+ * LCDC internal I/O mappings
-+ *
-+ * We have the following mapping:
-+ * phys virt
-+ * 08000000 f1000000
-+ */
-+
-+
-+
-+/*
-+ * SCOOP internal I/O mappings
-+ *
-+ * We have the following mapping:
-+ * phys virt
-+ * 10800000 f2000000
-+ */
-+
-+
-+#define CF_BUF_CTRL_BASE 0xF2000000
-+
-+#define CORGI_SCP_REG(adr) (*(volatile unsigned short*)(CF_BUF_CTRL_BASE+(adr)))
-+
-+#define CORGI_SCP_MCR 0x00
-+#define CORGI_SCP_CDR 0x04
-+#define CORGI_SCP_CSR 0x08
-+#define CORGI_SCP_CPR 0x0C
-+#define CORGI_SCP_CCR 0x10
-+#define CORGI_SCP_IRR 0x14
-+#define CORGI_SCP_IRM 0x14
-+#define CORGI_SCP_IMR 0x18
-+#define CORGI_SCP_ISR 0x1C
-+#define CORGI_SCP_GPCR 0x20
-+#define CORGI_SCP_GPWR 0x24
-+#define CORGI_SCP_GPRR 0x28
-+#define CORGI_SCP_REG_MCR CORGI_SCP_REG(CORGI_SCP_MCR)
-+#define CORGI_SCP_REG_CDR CORGI_SCP_REG(CORGI_SCP_CDR)
-+#define CORGI_SCP_REG_CSR CORGI_SCP_REG(CORGI_SCP_CSR)
-+#define CORGI_SCP_REG_CPR CORGI_SCP_REG(CORGI_SCP_CPR)
-+#define CORGI_SCP_REG_CCR CORGI_SCP_REG(CORGI_SCP_CCR)
-+#define CORGI_SCP_REG_IRR CORGI_SCP_REG(CORGI_SCP_IRR)
-+#define CORGI_SCP_REG_IRM CORGI_SCP_REG(CORGI_SCP_IRM)
-+#define CORGI_SCP_REG_IMR CORGI_SCP_REG(CORGI_SCP_IMR)
-+#define CORGI_SCP_REG_ISR CORGI_SCP_REG(CORGI_SCP_ISR)
-+#define CORGI_SCP_REG_GPCR CORGI_SCP_REG(CORGI_SCP_GPCR)
-+#define CORGI_SCP_REG_GPWR CORGI_SCP_REG(CORGI_SCP_GPWR)
-+#define CORGI_SCP_REG_GPRR CORGI_SCP_REG(CORGI_SCP_GPRR)
-+
-+#define CORGI_SCP_GPCR_PA22 ( 1 << 12 )
-+#define CORGI_SCP_GPCR_PA21 ( 1 << 11 )
-+#define CORGI_SCP_GPCR_PA20 ( 1 << 10 )
-+#define CORGI_SCP_GPCR_PA19 ( 1 << 9 )
-+#define CORGI_SCP_GPCR_PA18 ( 1 << 8 )
-+#define CORGI_SCP_GPCR_PA17 ( 1 << 7 )
-+#define CORGI_SCP_GPCR_PA16 ( 1 << 6 )
-+#define CORGI_SCP_GPCR_PA15 ( 1 << 5 )
-+#define CORGI_SCP_GPCR_PA14 ( 1 << 4 )
-+#define CORGI_SCP_GPCR_PA13 ( 1 << 3 )
-+#define CORGI_SCP_GPCR_PA12 ( 1 << 2 )
-+#define CORGI_SCP_GPCR_PA11 ( 1 << 1 )
-+
-+
-+/*
-+ * GPIOs
-+ */
-+#define CORGI_SCP_LED_GREEN CORGI_SCP_GPCR_PA11
-+#define CORGI_SCP_SWA CORGI_SCP_GPCR_PA12
-+#define CORGI_SCP_SWB CORGI_SCP_GPCR_PA13
-+#define CORGI_SCP_MUTE_L CORGI_SCP_GPCR_PA14
-+#define CORGI_SCP_MUTE_R CORGI_SCP_GPCR_PA15
-+#define CORGI_SCP_AKIN_PULLUP CORGI_SCP_GPCR_PA16
-+#define CORGI_SCP_APM_ON CORGI_SCP_GPCR_PA17
-+#define CORGI_SCP_BACKLIGHT_CONT CORGI_SCP_GPCR_PA18
-+#define CORGI_SCP_MIC_BIAS CORGI_SCP_GPCR_PA19
-+
-+
-+#define CORGI_SCP_IO_DIR ( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
-+ CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
-+ CORGI_SCP_MIC_BIAS )
-+#define CORGI_SCP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
-+#define CORGI_GPIO_CO 16
-+
-+
-+/*
-+ * Flash Memory mappings
-+ *
-+ * We have the following mapping:
-+ * phys virt
-+ * boot ROM 00000000 ef000000
-+ * NAND Flash 0C000000 f2100000
-+ */
-+#define NAND_FLASH_REG_BASE 0xf2100000
-+#define CORGI_CPLD_REG(ofst) (*(volatile unsigned char*)(NAND_FLASH_REG_BASE+(ofst)))
-+
-+/* register offset */
-+#define CORGI_ECCLPLB 0x00 /* line parity 7 - 0 bit */
-+#define CORGI_ECCLPUB 0x04 /* line parity 15 - 8 bit */
-+#define CORGI_ECCCP 0x08 /* column parity 5 - 0 bit */
-+#define CORGI_ECCCNTR 0x0C /* ECC byte counter */
-+#define CORGI_ECCCLRR 0x10 /* cleare ECC */
-+#define CORGI_FLASHIO 0x14 /* Flash I/O */
-+#define CORGI_FLASHCTL 0x18 /* Flash Control */
-+
-+/* Flash control bit */
-+#define CORGI_FLRYBY (1 << 5)
-+#define CORGI_FLCE1 (1 << 4)
-+#define CORGI_FLWP (1 << 3)
-+#define CORGI_FLALE (1 << 2)
-+#define CORGI_FLCLE (1 << 1)
-+#define CORGI_FLCE0 (1 << 0)
-+
-+
-+
-+
-+/*
-+CORGI_ * LED
-+ */
-+#define CORGI_GPIO_LED_ORANGE (13)
-+//#define CORGI_SCP_LED_GREEN CORGI_SCP_GPCR_PA11
-+
-+
-+/*
-+ * GPIOs
-+ */
-+/* PXA GPIOs */
-+#define CORGI_GPIO_KEY_INT (0) /* key interrupt */
-+#define CORGI_GPIO_AC_IN (1)
-+#define CORGI_GPIO_TP_INT (5) /* Touch Panel interrupt */
-+#define CORGI_GPIO_WAKEUP (3)
-+#define CORGI_GPIO_IR_ON (22)
-+#define CORGI_GPIO_AK_INT (4) // Remote Controller
-+#define CORGI_GPIO_HP_IN GPIO_AK_INT
-+#define CORGI_GPIO_CF_IRQ (17)
-+//#define CORGI_GPIO_CF_PRDY (17)
-+#define CORGI_GPIO_LED_ORANGE (13)
-+#define CORGI_GPIO_CF_CD (14)
-+#define CORGI_GPIO_SD_PWR (33)
-+#define CORGI_GPIO_nSD_CLK (6)
-+#define CORGI_GPIO_nSD_WP (7)
-+#define CORGI_GPIO_nSD_INT (10)
-+#define CORGI_GPIO_nSD_DETECT (9)
-+#define CORGI_GPIO_MAIN_BAT_LOW (11)
-+#define CORGI_GPIO_BAT_COVER (11)
-+#define CORGI_GPIO_ADC_TEMP_ON (21)
-+#define CORGI_GPIO_CHRG_ON (38)
-+#define CORGI_GPIO_CHRG_FULL (16)
-+#define CORGI_GPIO_USB_PULLUP (45)
-+#define CORGI_GPIO_HSYNC (44)
-+
-+/* KeyBoard */
-+#define CORGI_KEY_STROBE_NUM (12)
-+#define CORGI_KEY_SENSE_NUM (8)
-+#define CORGI_GPIO_ALL_STROBE_BIT (0x00003ffc)
-+#define CORGI_GPIO_HIGH_SENSE_BIT (0xfc000000)
-+#define CORGI_GPIO_HIGH_SENSE_RSHIFT (26)
-+#define CORGI_GPIO_LOW_SENSE_BIT (0x00000003)
-+#define CORGI_GPIO_LOW_SENSE_LSHIFT (6)
-+#define CORGI_GPIO_STROBE_BIT(a) GPIO_bit(66+(a))
-+#define CORGI_GPIO_SENSE_BIT(a) GPIO_bit(58+(a))
-+#define CORGI_GAFR_ALL_STROBE_BIT (0x0ffffff0)
-+#define CORGI_GAFR_HIGH_SENSE_BIT (0xfff00000)
-+#define CORGI_GAFR_LOW_SENSE_BIT (0x0000000f)
-+#define CORGI_GPIO_KEY_SENSE(a) (58+(a))
-+
-+
-+/*
-+ * Interrupts
-+ */
-+/* PXA GPIOs */
-+#define CORGI_IRQ_GPIO_KEY_INT IRQ_GPIO(0)
-+#define CORGI_IRQ_GPIO_AC_IN IRQ_GPIO(1)
-+#define CORGI_IRQ_GPIO_AK_INT IRQ_GPIO(4)
-+#define CORGI_IRQ_GPIO_HP_IN IRQ_GPIO_AK_INT
-+#define CORGI_IRQ_GPIO_TP_INT IRQ_GPIO(5)
-+#define CORGI_IRQ_GPIO_WAKEUP IRQ_GPIO(3)
-+#define CORGI_IRQ_GPIO_CO IRQ_GPIO(16)
-+#define CORGI_IRQ_GPIO_CF_IRQ IRQ_GPIO(17)
-+#define CORGI_IRQ_GPIO_CF_CD IRQ_GPIO(14)
-+#define CORGI_IRQ_GPIO_nSD_INT IRQ_GPIO(10)
-+#define CORGI_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9)
-+#define CORGI_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(11)
-+#define CORGI_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(58+(a))
-+
-+
-+// CS
-+#define CORGI_CS_MAX1111 1
-+#define CORGI_CS_ADS7846 2
-+#define CORGI_CS_LZ9JG18 3
-+
-+#endif /* __ASM_ARCH_CORGI_H */
-+
-diff -uNr linux-2.6.5-orig/include/asm-arm/thread_info.h linux-2.6.5/include/asm-arm/thread_info.h
---- linux-2.6.5-orig/include/asm-arm/thread_info.h 2004-06-14 20:31:55.000000000 +0100
-+++ linux-2.6.5/include/asm-arm/thread_info.h 2004-06-14 20:33:06.000000000 +0100
-@@ -108,8 +108,8 @@
- #define TI_CPU 20
- #define TI_CPU_DOMAIN 24
- #define TI_CPU_SAVE 28
--#define TI_USED_MATH 76
--#define TI_FPSTATE (TI_USED_MATH+16)
-+#define TI_USED_CP 76
-+#define TI_FPSTATE (TI_USED_CP+16)
-
- #endif
-
-diff -uNr linux-2.6.5-orig/include/linux/serial_core.h linux-2.6.5/include/linux/serial_core.h
---- linux-2.6.5-orig/include/linux/serial_core.h 2004-06-14 20:31:56.000000000 +0100
-+++ linux-2.6.5/include/linux/serial_core.h 2004-06-14 20:33:06.000000000 +0100
-@@ -38,7 +38,8 @@
- #define PORT_16850 12
- #define PORT_RSA 13
- #define PORT_NS16550A 14
--#define PORT_MAX_8250 14 /* max port ID */
-+#define PORT_XSCALE 15
-+#define PORT_MAX_8250 15 /* max port ID */
-
- /*
- * ARM specific type numbers. These are not currently guaranteed
-diff -uNr linux-2.6.5-orig/include/linux/serial_reg.h linux-2.6.5/include/linux/serial_reg.h
---- linux-2.6.5-orig/include/linux/serial_reg.h 2004-06-14 20:31:56.000000000 +0100
-+++ linux-2.6.5/include/linux/serial_reg.h 2004-06-14 20:33:06.000000000 +0100
-@@ -141,7 +141,7 @@
- #define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-
- /*
-- * The Intel PXA2xx chip defines those bits
-+ * The Intel XScale on-chip UARTs define these bits
- */
- #define UART_IER_DMAE 0x80 /* DMA Requests Enable */
- #define UART_IER_UUE 0x40 /* UART Unit Enable */
-diff -uNr linux-2.6.5-orig/arch/arm/boot/Makefile linux-2.6.5/arch/arm/boot/Makefile
---- linux-2.6.5-orig/arch/arm/boot/Makefile 2004-04-04 04:36:18.000000000 +0100
-+++ linux-2.6.5/arch/arm/boot/Makefile 2004-06-14 21:36:21.000000000 +0100
-@@ -69,6 +69,8 @@
- ZBSSADDR := ALIGN(4)
- endif
-
-+OBJCOPYFLAGS_zImage := --pad-to `(arm-linux-readelf -l arch/arm/boot/compressed/vmlinux | grep LOAD | awk '{ print $$6 }')`
-+
- export ZTEXTADDR ZBSSADDR ZRELADDR INITRD_PHYS PARAMS_PHYS
-
- targets := Image zImage bootpImage
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_ADIFCC is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE_PB is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-CONFIG_MACH_POODLE=y
-CONFIG_SHARP_LOCOMO=y
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_XSCALE_PMU=y
-
-#
-# General setup
-#
-# CONFIG_ZBOOT_ROM is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# At least one math emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-
-#
-# Generic Driver Options
-#
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-CONFIG_PM=y
-CONFIG_PREEMPT=y
-CONFIG_APM=y
-# CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2"
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_LOCOMO is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PXA is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-CONFIG_I2C_ISA=m
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_SCx200_ACB is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-# CONFIG_JFFS2_FS_NAND is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_EXPORTFS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# Misc devices
-#
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# Kernel hacking
-#
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_WAITQ is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
projects / vuplus_openembedded / commitdiff