Update of ATMEL board configuration files

Correction of at91sam9260ek and at91sam9g20ek configuration files:
Xserver is not needed. At91sam9rlek configuration file: no usbhost.

Adding of two new boards: at91sam9g10ek and at91sam9g45ekes. "es" stands
for Engineering Sample and correspond to the marking that is on the board.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>

diff --git a/conf/machine/at91sam9260ek.conf b/conf/machine/at91sam9260ek.conf
index 9a7ca9a..3fdfce4 100644 (file)
--- a/conf/machine/at91sam9260ek.conf
+++ b/conf/machine/at91sam9260ek.conf
@@ -7,7 +7,6 @@ TARGET_ARCH = "arm"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux"
 PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
 
 KERNEL_IMAGETYPE = "uImage"
 UBOOT_MACHINE = "at91sam9260ek_config"

diff --git a/conf/machine/at91sam9g10ek.conf b/conf/machine/at91sam9g10ek.conf
new file mode 100644 (file)
index 0000000..9f41fd9
--- /dev/null
+++ b/conf/machine/at91sam9g10ek.conf
@@ -0,0 +1,23 @@
+#@TYPE: Machine
+#@Name: Atmel AT91SAM9G10EK Development Platform
+#@DESCRIPTION: Machine configuration for the at91sam9g10ek development board with a at91sam9g10 processor
+
+TARGET_ARCH = "arm"
+#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+
+KERNEL_IMAGETYPE = "uImage"
+
+#don't try to access tty1
+USE_VT = "0"
+
+MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
+
+# used by sysvinit_2
+SERIAL_CONSOLE = "115200 ttyS0"
+IMAGE_FSTYPES ?= "jffs2"
+EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+
+require conf/machine/include/tune-arm926ejs.inc

diff --git a/conf/machine/at91sam9g20ek.conf b/conf/machine/at91sam9g20ek.conf
index 7dc6ba0..59c5a42 100644 (file)
--- a/conf/machine/at91sam9g20ek.conf
+++ b/conf/machine/at91sam9g20ek.conf
@@ -6,7 +6,6 @@ TARGET_ARCH = "arm"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux"
 PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
 
 KERNEL_IMAGETYPE = "uImage"
 UBOOT_MACHINE = "at91sam9g20ek_config"

diff --git a/conf/machine/at91sam9g45ekes.conf b/conf/machine/at91sam9g45ekes.conf
new file mode 100644 (file)
index 0000000..2d962ef
--- /dev/null
+++ b/conf/machine/at91sam9g45ekes.conf
@@ -0,0 +1,23 @@
+#@TYPE: Machine
+#@Name: Atmel AT91SAM9G45EKES Development Platform
+#@DESCRIPTION: Machine configuration for the at91sam9g45ekes development board with a at91sam9g45-es processor
+
+TARGET_ARCH = "arm"
+#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+
+KERNEL_IMAGETYPE = "uImage"
+
+#don't try to access tty1
+USE_VT = "0"
+
+MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
+
+# used by sysvinit_2
+SERIAL_CONSOLE = "115200 ttyS0"
+IMAGE_FSTYPES ?= "jffs2"
+EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+
+require conf/machine/include/tune-arm926ejs.inc

diff --git a/conf/machine/at91sam9rlek.conf b/conf/machine/at91sam9rlek.conf
index f7a78dc..de26926 100644 (file)
--- a/conf/machine/at91sam9rlek.conf
+++ b/conf/machine/at91sam9rlek.conf
@@ -17,7 +17,7 @@ PREFERRED_VERSION_at91bootstrap = "2.10"
 #don't try to access tty1
 USE_VT = "0"
 
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
+MACHINE_FEATURES = "kernel26 alsa ext2 usbgadget screen touchscreen"
 EXTRA_IMAGEDEPENDS += "u-boot"
 #EXTRA_IMAGEDEPENDS += "at91bootstrap"