bb.mkdirhier(root)
filesvar = bb.data.getVar('FILES', localdata, 1) or ""
files = filesvar.split()
+ cleandirs = []
for file in files:
if os.path.isabs(file):
file = '.' + file
newfiles = [ os.path.join(file,x) for x in os.listdir(file) ]
if newfiles:
files += newfiles
+ if file != "./":
+ cleandirs = [file] + cleandirs
continue
globbed = glob.glob(file)
if globbed:
fpath = os.path.join(root,file)
dpath = os.path.dirname(fpath)
bb.mkdirhier(dpath)
+ if file in cleandirs:
+ cleandirs.remove(file)
ret = bb.movefile(file,fpath)
if ret is None or ret == 0:
raise bb.build.FuncFailed("File population failed")
+ for dir in cleandirs:
+ if os.path.isdir(dir):
+ os.rmdir(dir)
+ else:
+ bb.note("ERROR: directory %s went away unexpectedly during package population" % dir)
del localdata
os.chdir(workdir)
DEPENDS += "python-scons-native"
scons_do_compile() {
- ${STAGING_BINDIR_NATIVE}/scons || \
+ ${STAGING_BINDIR_NATIVE}/scons PREFIX=${prefix} prefix=${prefix} || \
oefatal "scons build execution failed."
}
scons_do_install() {
- ${STAGING_BINDIR_NATIVE}/scons install || \
+ ${STAGING_BINDIR_NATIVE}/scons PREFIX=${D}${prefix} prefix=${D}${prefix} install || \
oefatal "scons install execution failed."
}
targetinfo = {\
"armeb-linux": "endian-big bit-32 common-glibc arm-common",\
+ "armeb-linux-gnueabi": "endian-big bit-32 common-glibc arm-common armeb-linux",\
"armeb-linux-uclibc": "endian-big bit-32 common-uclibc arm-common",\
+ "armeb-linux-uclibcgnueabi": "endian-big bit-32 common-uclibc arm-common armeb-linux-uclibc",\
"arm-linux": "endian-little bit-32 common-glibc arm-common",\
"arm-linux-gnueabi": "endian-little bit-32 common-glibc arm-common arm-linux",\
"arm-linux-uclibc": "endian-little bit-32 common-uclibc arm-common",\
PREFERRED_PROVIDER_dbus-glib = "dbus-glib"
PREFERRED_PROVIDER_virtual/libsdl ?= "libsdl-x11"
PREFERRED_PROVIDER_virtual/libxine ?= "libxine-x11"
+PREFERRED_PROVIDER_esound ?= "pulseaudio"
PREFERRED_VERSION_fontconfig = "2.4.1"
PREFERRED_VERSION_freetype = "2.2.1"
+PREFERRED_VERSION_freetype-native = "2.2.1"
#fix screen corruption issues
-PREFERRED_VERSION_cairo = "1.3.10"
+PREFERRED_VERSION_cairo = "1.3.12"
#work around a segfault in gcc for armv4t
PREFERRED_VERSION_glib-2.0_ep93xx = "2.12.3"
#EABI stuff
PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}libc-for-gcc = "glibc-intermediate"
PREFERRED_PROVIDER_virtual/arm-angstrom-linux-gnueabi-libc-for-gcc = "glibc-intermediate"
+PREFERRED_PROVIDER_virtual/armeb-angstrom-linux-gnueabi-libc-for-gcc = "glibc-intermediate"
PREFERRED_PROVIDER_virtual/arm-linux-libc-for-gcc = "glibc-intermediate"
+PREFERRED_PROVIDER_virtual/armeb-linux-libc-for-gcc = "glibc-intermediate"
PREFERRED_PROVIDER_virtual/powerpc-angstrom-linux-libc-for-gcc = "glibc-intermediate"
#shouldn't that be uclibc-initial????
PREFERRED_PROVIDER_virtual/arm-angstrom-linux-uclibcgnueabi-libc-for-gcc = "uclibc-initial"
+PREFERRED_PROVIDER_virtual/armeb-angstrom-linux-uclibcgnueabi-libc-for-gcc = "uclibc-initial"
#use EABI toolchain
PREFERRED_VERSION_gcc ?= "4.1.1"
# Angstrom want to ship some extra stuff. This should be moved into task-base eventually
-DISTRO_EXTRA_RDEPENDS = "\
+DISTRO_EXTRA_RDEPENDS += "\
update-modules module-init-tools modutils-initscripts \
sysvinit initscripts sysvinit-pidof \
${@base_contains("MACHINE_FEATURES", "screen", "psplash", "",d)} \
PREFERRED_PROVIDER_virtual/libintl ?= "glibc"
PREFERRED_PROVIDER_virtual/libc ?= "glibc"
-TARGET_OS = "linux${@['','-gnueabi'][bb.data.getVar('TARGET_ARCH',d,1)=='arm']}"
+TARGET_OS = "linux${@['','-gnueabi'][bb.data.getVar('TARGET_ARCH',d,1) in ['arm', 'armeb']]}"
#mess with compiler flags to use -Os instead of -O2
#Please see http://free-electrons.com/doc/embedded_linux_optimizations/img47.html for some more info
USE_NLS ?= "no"
-TARGET_OS = "linux${@['-uclibc','-uclibcgnueabi'][bb.data.getVar('TARGET_ARCH',d,1)=='arm']}"
+TARGET_OS = "linux${@['-uclibc','-uclibcgnueabi'][bb.data.getVar('TARGET_ARCH',d,1) in ['arm', 'armeb']]}"
#mess with compiler flags to use -Os instead of -O2
#Please see http://free-electrons.com/doc/embedded_linux_optimizations/img47.html for some more info
+++ /dev/null
-# Opie
-#use 1337 mt version of opie to have a webbrowser
-PALMTOP_USE_MULTITHREADED_QT = "yes"
-QTE_VERSION = "2.3.10"
-OPIE_VERSION = "1.2.2"
-require conf/distro/include/preferred-opie-versions.inc
# slugos-[bl][at][gu] - a specific configuration encoded as follows:
#
# b or l - big or little endian
-# set ARCH_BYTE_SEX to match
#
# a or t - ARM or Thumb instructions in the low level libraries
# set ARM_INSTRUCTION_SET to match
# The following must also be set, they define the basic format of the build
#
-#ARCH_BYTE_SEX "be" or "le"
#ARM_INSTRUCTION_SET "arm" or "thumb"
#TARGET_OS "linux" or "linux-uclibc"
#SLUGOS_IMAGESEX "big-endian" or "little-endian" (JFFS2 format)
USE_NLS ?= "no"
# To make errors easier to identify:
-DISTRO_NAME ?= "INVALID-${ARCH_BYTE_SEX}-${ARM_INSTRUCTION_SET}-${TARGET_OS}"
+DISTRO_NAME ?= "INVALID-${SITEINFO_ENDIANESS}-${ARM_INSTRUCTION_SET}-${TARGET_OS}"
DISTRO_TYPE ?= "INVALID"
# The following must not be changed.
# Select the correct versions of the kernel and modules (these are the
# defaults, override in the conf/distro top-level distro file).
PREFERRED_PROVIDER_virtual/kernel ?= "ixp4xx-kernel"
-PREFERRED_VERSION_ixp4xx-kernel ?= "2.6.19+2.6.20-rc4"
+PREFERRED_VERSION_ixp4xx-kernel ?= "2.6.19"
# Select the smallest provider of x11 libraries
PREFERRED_PROVIDER_virtual/libx11 ?= "diet-x11"
# DISTRO_FEED ?= "unstable"
DISTRO_TYPE ?= "beta"
-ARCH_BYTE_SEX = "be"
+TARGET_ARCH = "armeb"
ARM_INSTRUCTION_SET = "arm"
TARGET_OS = "linux"
SLUGOS_IMAGESEX ?= "big-endian"
# DISTRO_FEED ?= "unstable"
DISTRO_TYPE ?= "alpha"
-ARCH_BYTE_SEX = "be"
+TARGET_ARCH = "armeb"
ARM_INSTRUCTION_SET = "arm"
TARGET_OS = "linux-uclibc"
SLUGOS_IMAGESEX ?= "big-endian"
# DISTRO_FEED ?= "unstable"
DISTRO_TYPE ?= "beta"
-ARCH_BYTE_SEX = "be"
+TARGET_ARCH = "armeb"
ARM_INSTRUCTION_SET = "thumb"
TARGET_OS = "linux-uclibc"
SLUGOS_IMAGESEX ?= "big-endian"
# DISTRO_FEED ?= "unstable"
DISTRO_TYPE ?= "beta"
-ARCH_BYTE_SEX = "le"
+TARGET_ARCH = "arm"
ARM_INSTRUCTION_SET = "arm"
TARGET_OS = "linux"
SLUGOS_IMAGESEX ?= "big-endian"
# DISTRO_FEED ?= "unstable"
DISTRO_TYPE ?= "alpha"
-ARCH_BYTE_SEX = "le"
+TARGET_ARCH = "arm"
ARM_INSTRUCTION_SET = "arm"
TARGET_OS = "linux-uclibc"
SLUGOS_IMAGESEX ?= "big-endian"
# DISTRO_FEED ?= "unstable"
DISTRO_TYPE ?= "beta"
-ARCH_BYTE_SEX = "le"
+TARGET_ARCH = "arm"
ARM_INSTRUCTION_SET = "thumb"
TARGET_OS = "linux-uclibc"
SLUGOS_IMAGESEX ?= "big-endian"
TARGET_OS = "linux"
# select distro specific options to match that of the original LinkSys build
-ARCH_BYTE_SEX = "be"
ARM_INSTRUCTION_SET = "arm"
THUMB_INTERWORK = "no"
PREFERRED_VERSION_glibc ?= "2.2.5"
PREFERRED_VERSION_glibc-initial ?= "2.2.5"
-PREFERRED_PROVIDER_virtual/kernel ?= "unslung-kernel"
+PREFERRED_PROVIDER_virtual/kernel = "unslung-kernel"
PREFERRED_VERSION_unslung-kernel ?= "2.4.22.l2.3r63"
PREFERRED_VERSION_unslung-rootfs ?= "2.3r63"
PREFERRED_VERSION_nslu2-linksys-firmware ?= "2.3r63"
#OLDEST_KERNEL = "2.6.16"
TARGET_ARCH = "arm"
PREFERRED_VERSION_compulab-pxa270 = "2.6.16"
-GUI_MACHINE_CLASS = "bigscreen"
+GUI_MACHINE_CLASS ?= "bigscreen"
PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}"
PACKAGE_EXTRA_ARCHS = "armv4 armv5te"
require conf/machine/include/tune-xscale.conf
# used by sysvinit_2
-SERIAL_CONSOLE = "38400 ttySA0"
+SERIAL_CONSOLE ?= "38400 ttySA0"
# used by opie-collections.inc
-ROOT_FLASH_SIZE = "32"
+ROOT_FLASH_SIZE ?= "32"
EXTRA_IMAGECMD_jffs2 = "--pad=0x1000000 --eraseblock=0x40000"
PACKAGE_EXTRA_ARCHS = "armv4t"
PREFERRED_PROVIDER_virtual/kernel = "${MACHINE}-kernel"
+PREFERRED_PROVIDER_xserver = "xserver-kdrive"
#don't try to access tty1
USE_VT = "0"
PCMCIA_MANAGER = "pcmciautils"
PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+MACHINE_EXTRA_RRECOMMENDS = "kernel-module-snd-h4000-audio \
+ kernel-module-i2c-pxa"
+
#
# Modules autoload and other boot properties
#
module_autoload_snd-pcm-oss = "snd-pcm-oss"
+module_autoload_snd-mixer-oss = "snd-mixer-oss"
+module_autoload_snd-h4000_audio = "snd-h4000_audio"
module_autoload_g_ether = "g_ether"
SERIAL_CONSOLE = "115200 ttyS0 vt100"
#@NAME: ixp4xx
#@DESCRIPTION: genric machine configuration for ixp4xx platforms
+MACHINE_FEATURES = "kernel26 usbhost ext2"
+
+EXTRA_IMAGECMD_jffs2 = "--pad --eraseblock=0x20000 --faketime -n"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "ixp4xx-kernel"
+
#-------------------------------------------------------------------------------
# INPUTS
#-------------------------------------------------------------------------------
# <possible values>
# description
-ARCH_BYTE_SEX = "le"
-# "be" "le"
-# The memory byte sex and (on correctly implemented hardware - the IXP4XX is
-# correct) the byte sex of the buses within the system. 'be' (big-endian)
-# means that the first byte is the most significant byte on a bus, 'le'
-# (little-endian) means that the first byte is the least significant byte.
-
ARM_INSTRUCTION_SET = "arm"
# "arm" "thumb"
# The instruction set the compiler should use when generating application
# after ${DISTRO}, this allows different distros to share a common base of
# overrides. The value given must include a leading ':' or chaos will result.
-IXP4XX_SUFFIX = "${MACHINE_ARCH}"
-# <string>
-# Kernel suffix - 'ixp4xxbe' or 'ixp4xxle' for a truely generic image, controls
-# the suffix on the name of the generated zImage, override in the DISTRO
-# configuration if patches or defconfig are changed for the DISTRO.
-
#-------------------------------------------------------------------------------
# OUTPUTS
#-------------------------------------------------------------------------------
#OVERRIDES
# The standard ':' separated list of overrides used by bitbake - see the
# basic setting in bitbake.conf. This list is based on that used for the
-# standard setting however :<base>, :thumb and :thumb-interwork will be
-# inserted at appropriate points if a base distro, default use of thumb or
-# arm/thumb interworking are enabled in the inputs.
-OVERRIDE_THUMB = "${@['', ':thumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}"
-OVERRIDE_INTERWORK = "${@['', ':thumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}"
-OVERRIDES = "local:${MACHINE}:ixp4xx:${DISTRO}${DISTRO_BASE}:${TARGET_OS}:${TARGET_ARCH}${OVERRIDE_THUMB}${OVERRIDE_INTERWORK}:build-${BUILD_OS}:fail-fast"
+# standard setting however :<base> will be
+# inserted at appropriate points if a base distro is enabled in the inputs.
+OVERRIDES = "local:${MACHINE}:ixp4xx:${DISTRO}${DISTRO_BASE}:${TARGET_OS}:${TARGET_ARCH}:build-${BUILD_OS}:fail-fast"
-# TARGET_CC_ARCH
-# TARGET_CC_KERNEL_ARCH
-# TARGET_LD_ARCH
-# TARGET_LD_KERNEL_ARCH
-# Compiler and linker options for application code and kernel code. These
-# options ensure that the compiler has the correct settings for the selected
-# instruction set and interworking.
-ARM_INTERWORK_M_OPT = "${@['-mno-thumb-interwork', '-mthumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}"
-ARM_THUMB_M_OPT = "${@['-mno-thumb', '-mthumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}"
-#
-TARGET_CC_ARCH = "-march=armv5te -mtune=xscale ${ARM_INTERWORK_M_OPT} ${ARM_THUMB_M_OPT}"
-TARGET_CC_KERNEL_ARCH = "-march=armv5te -mtune=xscale -mno-thumb-interwork -mno-thumb"
-TARGET_LD_ARCH = ""
-TARGET_LD_KERNEL_ARCH = ""
+require conf/machine/include/tune-xscale.conf
+require conf/machine/include/tune-thumb.conf
+
+#-------------------------------------------------------------------------------
+# Board defaults
+#-------------------------------------------------------------------------------
+# These values are board specific but they seem to be common to a large number
+# of boards so are reasonable defaults.
+SERIAL_CONSOLE = "115200 ttyS0"
+KERNEL_CONSOLE = "ttyS0,115200n8"
+USE_VT = "0"
# FULL_OPTIMIZATION
# Optimization settings. Os works fine and is significantly better than O2.
-fno-unroll-loops -fno-inline-functions \
-fweb -funit-at-a-time"
-# TARGET_ARCH
-# The correct setting for the system endianness (ARCH_BYTE_SEX). This will
-# be arm (le) or armeb (be) - it is difficult to be more precise in the
-# setting because of the large number of ways it is used within OpenEmbedded.
-TARGET_ARCH = "${@['armeb', 'arm'][bb.data.getVar('ARCH_BYTE_SEX', d, 1) == 'le']}"
-
-# TARGET_PACKAGE_ARCH [not used]
-# The correct setting for the generated packages. This corresponds to the
-# -march flag passed to the compiler because that limits the architectures
-# on which the generated code will run.
-BYTE_SEX_CHAR = "${@['b', 'l'][bb.data.getVar('ARCH_BYTE_SEX', d, 1) == 'le']}"
-TARGET_PACKAGE_ARCH_BASE = "${@['armv5te', 'thumbv5t'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}"
-TARGET_PACKAGE_ARCH = "${TARGET_PACKAGE_ARCH_BASE}${BYTE_SEX_CHAR}"
-
-# MACHINE_ARCH
-# The correct setting for packages which are specific to the machine, this
-# defaults to ${MACHINE} in bitbake.conf, however it is set to ixp4xx here
-# because everything built here is no more specific than that.
-MACHINE_ARCH = "ixp4xx${ARCH_BYTE_SEX}"
-
-# PACKAGE_EXTRA_ARCHS
-# The full list of package architectures which should run on the system.
-# This takes into account both the board level issues and the INPUTS set
-# by the distro. The arm list is derived from the architecture settings
-# known to gcc, the thumb list is then derived from that (only the 't'
-# architectures of course).
-#[not used]: TARGET_ARCH is handled below because it is also currently
-# used for thumb packages.
-#ARM_ARCHITECTURES = "${TARGET_ARCH} armv2${BYTE_SEX_CHAR} armv2a${BYTE_SEX_CHAR} armv3${BYTE_SEX_CHAR} armv3m${BYTE_SEX_CHAR} armv4${BYTE_SEX_CHAR} armv4t${BYTE_SEX_CHAR} armv5${BYTE_SEX_CHAR} armv5t${BYTE_SEX_CHAR} armv5e${BYTE_SEX_CHAR} armv5te${BYTE_SEX_CHAR} xscale${BYTE_SEX_CHAR}"
-ARM_ARCHITECTURES = "armv2${BYTE_SEX_CHAR} armv2a${BYTE_SEX_CHAR} armv3${BYTE_SEX_CHAR} armv3m${BYTE_SEX_CHAR} armv4${BYTE_SEX_CHAR} armv4t${BYTE_SEX_CHAR} armv5${BYTE_SEX_CHAR} armv5t${BYTE_SEX_CHAR} armv5e${BYTE_SEX_CHAR} armv5te${BYTE_SEX_CHAR} xscale${BYTE_SEX_CHAR}"
-THUMB_ARCHITECTURES = "thumbe${BYTE_SEX_CHAR} thumbv4t${BYTE_SEX_CHAR} thumbv5t${BYTE_SEX_CHAR}"
-
-# NOTE: this list contains just the things which rootfs_ipk.bbclass does
-# not add, rootfs_ipk.bbclass evaluates:
-#
-# ipkgarchs="all any noarch ${TARGET_ARCH} ${PACKAGE_EXTRA_ARCHS} ${MACHINE}"
-#
-# This is a priority ordered list - most desireable architecture at the end,
-# so put <ARM_INSTRUCTION_SET>_ARCHITECTURES at the end and, if
-# THUMB_INTERWORK precede this with the other architectures.
-PACKAGE_EXTRA_ARCHS = "ixp4xx ${MACHINE} \
- ${@(lambda arch_thumb, arch_arm, is_arm, interwork: \
- (interwork and (is_arm and arch_thumb or arch_arm) + ' ' or '') \
- + '${TARGET_ARCH} ' + (is_arm and arch_arm or arch_thumb)) \
- (bb.data.getVar('THUMB_ARCHITECTURES', d, 1), \
- bb.data.getVar('ARM_ARCHITECTURES', d, 1), \
- bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) != 'thumb', \
- bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes')} \
- ${MACHINE_ARCH} ${MACHINE}${ARCH_BYTE_SEX}"
-
-# IPKG_ARCH_LIST [not used]
-# This is used to override the ipkgarchs settings in rootfs_ipk.bbclass, allowing
-# the removal of the raw "${MACHINE}" from the end of the list. ${MACHINE} and
-# ixp4xx are included at the start (lower priority) as the non-byte-sex specific
-# versions.
-IPKG_ARCH_LIST = "all any noarch ixp4xx ${MACHINE} ${PACKAGE_EXTRA_ARCHS}"
-
-#-------------------------------------------------------------------------------
-# Board defaults
-#-------------------------------------------------------------------------------
-# These values are board specific but they seem to be common to a large number
-# of boards so are reasonable defaults.
-SERIAL_CONSOLE = "115200 ttyS0"
-KERNEL_CONSOLE = "ttyS0,115200n8"
-USE_VT = "0"
# but requires more instructions (140% for 70% smaller code) so may be
# slower.
-THUMB_INTERWORK ?= "no"
+THUMB_INTERWORK ?= "yes"
# "yes" "no"
# Whether to compile with code to allow interworking between the two
# instruction sets. This allows thumb code to be executed on a primarily
OVERRIDE_THUMB = "${@['', ':thumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}"
OVERRIDE_INTERWORK = "${@['', ':thumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}"
-OVERRIDES += "${OVERRIDE_THUMB}${OVERRIDE_INTERWORK}"
+OVERRIDES .= "${OVERRIDE_THUMB}${OVERRIDE_INTERWORK}"
# Compiler and linker options for application code and kernel code. These
# options ensure that the compiler has the correct settings for the selected
# instruction set and interworking.
-ARM_INTERWORK_M_OPT = "${@['', '-mthumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}"
-ARM_THUMB_M_OPT = "${@['', '-mthumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}"
+ARM_INTERWORK_M_OPT = "${@['-mno-thumb-interwork', '-mthumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}"
+ARM_THUMB_M_OPT = "${@['-mno-thumb', '-mthumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}"
#
TARGET_CC_ARCH += "${ARM_INTERWORK_M_OPT} ${ARM_THUMB_M_OPT}"
-TARGET_CC_KERNEL_ARCH += "-mno-thumb"
+TARGET_CC_KERNEL_ARCH += "-mno-thumb-interwork -mno-thumb"
TARGET_CC_ARCH = "-march=armv5te -mtune=xscale"
-PACKAGE_ARCH = "armv5te"
-
+TARGET_CC_KERNEL_ARCH = "-march=armv5te -mtune=xscale"
+PACKAGE_ARCH = "${@['armv5teb', 'armv5te'][bb.data.getVar('SITEINFO_ENDIANESS', d, 1) == 'le']}"
MACHINE_KERNEL_VERSION = "2.6"
-EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x4000 --pad --faketime -n"
+ERASEBLOCKSIZE = "0x4000"
+ERASEBLOCKSIZE_akita = "0x20000"
+
+EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=${ERASEBLOCKSIZE} --pad --faketime -n"
IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS} --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2.bin ${EXTRA_IMAGECMD}"
EXTRA_IMAGEDEPENDS += "sharp-flash-header-c700"
IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS} --faketime \
- --output=${T}/${IMAGE_NAME}.rootfs.jffs2 ${EXTRA_IMAGECMD}; \
+ --output=${T}/${IMAGE_NAME}.rootfs.jffs2; \
+ sumtool -i ${T}/${IMAGE_NAME}.rootfs.jffs2 \
+ -o ${T}/${IMAGE_NAME}.rootfs.jffs2.summary \
+ --eraseblock=${ERASEBLOCKSIZE} -l -p; \
cat ${STAGING_LIBDIR}/sharp-flash-header/header-c700.bin \
- ${T}/${IMAGE_NAME}.rootfs.jffs2 > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.img"
-
-# add a summary to the jffs2 file to make it mount a lot faster
-EXTRA_IMAGECMD_jffs2 += "&& sumtool -i ${T}/${IMAGE_NAME}.rootfs.jffs2 \
- -o ${T}/${IMAGE_NAME}.rootfs.jffs2.summary \
- --eraseblock=0x4000 -l -p"
-
-IMAGE_CMD_jffs2 += "; cat ${STAGING_LIBDIR}/sharp-flash-header/header-c700.bin \
- ${T}/${IMAGE_NAME}.rootfs.jffs2.summary > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.summary.img"
+ ${T}/${IMAGE_NAME}.rootfs.jffs2 > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2; \
+ rm ${T}/${IMAGE_NAME}.rootfs.jffs2; \
+ cat ${STAGING_LIBDIR}/sharp-flash-header/header-c700.bin \
+ ${T}/${IMAGE_NAME}.rootfs.jffs2.summary > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.summary.jffs2 \
+ rm ${T}/${IMAGE_NAME}.rootfs.jffs2.summary;"
#@NAME: Generic IXP4XX kernel
#@DESCRIPTION: Machine configuration for a generic ixp4xx board
-MACHINE_FEATURES = "kernel26 usbhost ext2"
-
require conf/machine/include/ixp4xx.conf
-
-PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ixp4xx${ARCH_BYTE_SEX}"
-
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 --faketime -n"
-
-PREFERRED_PROVIDER_virtual/kernel ?= "ixp4xx-kernel"
#@TYPE: Machine
#@NAME: Generic IXP4XX kernel
-#@DESCRIPTION: Machine configuration for a generic ixp4xx board in bigendian mode
+#@DESCRIPTION: Machine configuration for a generic ixp4xx board in big-endian mode
-MACHINE_FEATURES = "kernel26 usbhost ext2"
+TARGET_ARCH = "armeb"
+# PACKAGE_ARCH is set in tune-xscale.conf
+PACKAGE_EXTRA_ARCHS = "armv4b armv4tb armv5eb armv5teb"
-ARCH_BYTE_SEX = "be"
-require conf/machine/include/ixp4xx.conf
-
-PACKAGE_EXTRA_ARCHS = "armv4eb armv4teb armv5eb armv5teb ixp4xxeb"
+MACHINE_ARCH = "ixp4xxbe"
-EXTRA_IMAGECMD_jffs2 = "--pad --big-endian --eraseblock=0x20000 --faketime -n"
-
-PREFERRED_PROVIDER_virtual/kernel ?= "ixp4xx-kernel"
+require conf/machine/include/ixp4xx.conf
+EXTRA_IMAGECMD_jffs2 += "--big-endian"
#@NAME: Generic IXP4XX kernel
#@DESCRIPTION: Machine configuration for a generic ixp4xx board in little-endian mode
-MACHINE_FEATURES = "kernel26 usbhost ext2"
+TARGET_ARCH = "arm"
+# PACKAGE_ARCH is set in tune-xscale.conf
+PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te"
-ARCH_BYTE_SEX = "le"
-require conf/machine/include/ixp4xx.conf
-require conf/machine/include/tune-xscale.conf
-
-
-PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te ixp4xxle"
+MACHINE_ARCH = "ixp4xxle"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 --faketime -n"
-
-PREFERRED_PROVIDER_virtual/kernel ?= "ixp4xx-kernel"
+require conf/machine/include/ixp4xx.conf
+EXTRA_IMAGECMD_jffs2 += " --little-endian"
#@NAME: Linksys NSLU2
#@DESCRIPTION: Machine configuration for the Linksys NSLU2 product
+# Note that TARGET_ARCH gets set by the DISTRO for the "nslu2" machine.
+# (Yes, this was a mistake, but it's legacy and can't be easily changed now.)
+# The "nslu2" machine is deprecated - use "nslu2le" or "nslu2be" instead.
+
require conf/machine/include/ixp4xx.conf
+
+# This should eventually be removed (when we move from nslu2 to nslu2le/nslu2be).
+MACHINE_ARCH = "${@['ixp4xxbe', 'ixp4xxle'][bb.data.getVar('SITEINFO_ENDIANESS', d, 1) == 'le']}"
+
+# This should eventually be removed (when we move from nslu2 to nslu2le/nslu2be).
+PACKAGE_ARCH = "${@['armeb', 'arm'][bb.data.getVar('SITEINFO_ENDIANESS', d, 1) == 'le']}"
+
+# This should eventually be removed (when we move from nslu2 to nslu2le/nslu2be).
+PACKAGE_EXTRA_ARCHS = "${@['ixp4xxbe nslu2be', 'ixp4xxle nslu2le'][bb.data.getVar('SITEINFO_ENDIANESS', d, 1) == 'le']}"
+
+# This should eventually be removed (when we move from nslu2 to nslu2le/nslu2be).
+EXTRA_IMAGECMD_jffs2 += "${@['--big-endian', '--little-endian'][bb.data.getVar('SITEINFO_ENDIANESS', d, 1) == 'le']}"
--- /dev/null
+#@TYPE: Machine
+#@NAME: Linksys NSLU2 (big-endian)
+#@DESCRIPTION: Machine configuration for an NSLU2 in big-endian mode
+
+require conf/machine/ixp4xxbe.conf
+
+MACHINE_ARCH = "ixp4xxbe"
+
+PACKAGE_EXTRA_ARCHS += "ixp4xxbe"
--- /dev/null
+#@TYPE: Machine
+#@NAME: Linksys NSLU2 (little-endian)
+#@DESCRIPTION: Machine configuration for an NSLU2 in little-endian mode
+
+require conf/machine/ixp4xxle.conf
+
+MACHINE_ARCH = "ixp4xxle"
+
+PACKAGE_EXTRA_ARCHS += "ixp4xxle"
--- /dev/null
+#@TYPE: Machine
+#@NAME: Palm Zire 72
+#@DESCRIPTION: Machine configuration for the Palm Zire 72
+
+TARGET_ARCH = "arm"
+PACKAGE_EXTRA_ARCHS = "arm armv4t armv5te"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-hackndev-2.6"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
+
+MACHINE_FEATURES = "kernel26 touchscreen apm alsa pcmcia irda ext2 usbgadget screen"
+
+ROOT_FLASH_SIZE = "100"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+GUI_MACHINE_CLASS = "bigscreen"
+
+# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
+require conf/machine/include/tune-xscale.conf
+require conf/machine/include/tune-thumb.conf
+
+module_autoload_sa1100-rtc = "sa1100-rtc"
# Software/packages selection
#
PREFERRED_PROVIDER_virtual/kernel = "linux-handhelds-2.6"
-PREFERRED_VERSION_linux-handhelds-2.6 ?= "2.6.19-hh8"
+PREFERRED_VERSION_linux-handhelds-2.6 ?= "2.6.18-hh2"
PCMCIA_MANAGER = "pcmciautils"
PREFERRED_PROVIDER_xserver = "xserver-kdrive"
PIVOTBOOT_EXTRA_RDEPENDS += "pivotinit ${PCMCIA_MANAGER}"
PACKAGE_EXTRA_ARCHS += "iwmmxt"
-IMAGE_FSTYPES ?= "tar.gz"
+IMAGE_FSTYPES += "tar.gz"
ROOT_FLASH_SIZE = "100"
DESCRIPTION = "An ASCII art gfx library."
SECTION = "libs"
LICENSE="LGPL"
+PR = "r1"
SRC_URI = "${SOURCEFORGE_MIRROR}/aa-project/aalib-${PV}.tar.gz \
file://configure.patch;patch=1"
EXTRA_OECONF = '--without-x11-driver --without-slang-driver \
--with-curses-driver --without-gpm \
--without-x --with-ncurses=${STAGING_LIBDIR}/..'
+
+do_stage() {
+ oe_libinstall -a -so -C src libaa ${STAGING_LIBDIR}
+ install -d ${STAGING_INCDIR}/
+ install -m 0644 src/*.h ${STAGING_INCDIR}/
+}
+++ /dev/null
-#! /bin/sh -e
-
-test -x /usr/sbin/acpid || exit 0
-test -d /proc/acpi || exit 0
-
-case "$1" in
- start)
- echo -n "Starting Advanced Configuration and Power Interface daemon: "
- start-stop-daemon -S -x /usr/sbin/acpid -- -c /etc/acpi/events -s /var/run/.acpid.socket
- echo "acpid."
- ;;
- stop)
- echo -n "Stopping Advanced Configuration and Power Interface daemon: "
- start-stop-daemon -K -x /usr/sbin/acpid
- echo "acpid."
- ;;
- restart|force-reload)
- $0 stop
- $0 start
- ;;
- *)
- echo "Usage: /etc/init.d/acpid {start|stop|restart|force-reload}"
- exit 1
-esac
-
-exit 0
+++ /dev/null
-#! /bin/sh -e
-
-test -x /usr/sbin/acpid || exit 0
-test -d /proc/acpi || exit 0
-
-case "$1" in
- start)
- echo -n "Starting Advanced Configuration and Power Interface daemon: "
- start-stop-daemon -S -x /usr/sbin/acpid -- -c /etc/acpi/events -s /var/run/.acpid.socket
- echo "acpid."
- ;;
- stop)
- echo -n "Stopping Advanced Configuration and Power Interface daemon: "
- start-stop-daemon -K -x /usr/sbin/acpid
- echo "acpid."
- ;;
- restart|force-reload)
- $0 stop
- $0 start
- ;;
- *)
- echo "Usage: /etc/init.d/acpid {start|stop|restart|force-reload}"
- exit 1
-esac
-
-exit 0
+++ /dev/null
-#! /bin/sh -e
-
-test -x /usr/sbin/acpid || exit 0
-test -d /proc/acpi || exit 0
-
-case "$1" in
- start)
- echo -n "Starting Advanced Configuration and Power Interface daemon: "
- start-stop-daemon -S -x /usr/sbin/acpid -- -c /etc/acpi/events -s /var/run/.acpid.socket
- echo "acpid."
- ;;
- stop)
- echo -n "Stopping Advanced Configuration and Power Interface daemon: "
- start-stop-daemon -K -x /usr/sbin/acpid
- echo "acpid."
- ;;
- restart|force-reload)
- $0 stop
- $0 start
- ;;
- *)
- echo "Usage: /etc/init.d/acpid {start|stop|restart|force-reload}"
- exit 1
-esac
-
-exit 0
require acpid.inc
+PR = "r1"
+
require acpid.inc
SRC_URI += "file://gcc40.patch;patch=1"
+PR = "r1"
+
require acpid.inc
SRC_URI += "file://gcc40.patch;patch=1"
+PR = "r1"
+
--- /dev/null
+#! /bin/sh -e
+
+test -x /usr/sbin/acpid || exit 0
+test -d /proc/acpi || exit 0
+
+case "$1" in
+ start)
+ echo -n "Starting Advanced Configuration and Power Interface daemon: "
+ start-stop-daemon -S -x /usr/sbin/acpid -- -c /etc/acpi/events
+ echo "acpid."
+ ;;
+ stop)
+ echo -n "Stopping Advanced Configuration and Power Interface daemon: "
+ start-stop-daemon -K -x /usr/sbin/acpid
+ echo "acpid."
+ ;;
+ restart|force-reload)
+ $0 stop
+ $0 start
+ ;;
+ *)
+ echo "Usage: /etc/init.d/acpid {start|stop|restart|force-reload}"
+ exit 1
+esac
+
+exit 0
# defconfig to .config
do_configure() {
rm -f ${S}/.config
- if test '${ARCH_BYTE_SEX}' = be
- then
+ . ${CONFIG_SITE}
+ if [ "x$ac_cv_c_bigendian" = "xyes" -o "x$ac_cv_c_littleendian" = "xno" ]; then
sed -e 's/.*CONFIG_USER_BIGENDIAN.*/CONFIG_USER_BIGENDIAN=y/' \
-e 's/.*CONFIG_BIGENDIAN.*/CONFIG_BIGENDIAN=y/' \
-e 's|CONFIG_ENV_DEFAULT_CMDLINE=|CONFIG_ENV_DEFAULT_CMDLINE=\"${CMDLINE}\"|' \
${WORKDIR}/defconfig > ${S}/.config
- else
+ elif [ "x$ac_cv_c_littleendian" = "xyes" -o "x$ac_cv_c_bigendian" = "xno" ]; then
sed -e 's/.*CONFIG_USER_LITTLEENDIAN.*/CONFIG_USER_LITTLEENDIAN=y/' \
-e 's/.*CONFIG_LITTLEENDIAN.*/CONFIG_LITTLEENDIAN=y/' \
-e 's/.*CONFIG_ENV_REGION_KERNEL_SWAP.*/CONFIG_ENV_REGION_KERNEL_SWAP=y/' \
-e 's|CONFIG_ENV_DEFAULT_CMDLINE=|CONFIG_ENV_DEFAULT_CMDLINE=\"${CMDLINE}\"|' \
${WORKDIR}/defconfig > ${S}/.config
+ else
+ oefatal do_configure cannot determine endianess
fi
oe_runmake oldconfig
}
do_populate_staging() {
install -d ${STAGING_LOADER_DIR}
- # FIXME - arch-arm should not be hard-coded
- if test '${ARCH_BYTE_SEX}' = be
- then
+ . ${CONFIG_SITE}
+ if [ "x$ac_cv_c_bigendian" = "xyes" -o "x$ac_cv_c_littleendian" = "xno" ]; then
+ # FIXME - arch-arm should not be hard-coded
cp src/arch-arm/rom/apex.bin ${STAGING_LOADER_DIR}/apex.bin
- else
+ elif [ "x$ac_cv_c_littleendian" = "xyes" -o "x$ac_cv_c_bigendian" = "xno" ]; then
+ # FIXME - arch-arm should not be hard-coded
devio '<<'src/arch-arm/rom/apex.bin >${STAGING_LOADER_DIR}/apex.bin 'xp $,4'
+ else
+ oefatal do_populate_staging cannot determine endianess
fi
}
# defconfig to .config
do_configure() {
rm -f ${S}/.config
- if test '${ARCH_BYTE_SEX}' = be
- then
+ . ${CONFIG_SITE}
+ if [ "x$ac_cv_c_bigendian" = "xyes" -o "x$ac_cv_c_littleendian" = "xno" ]; then
sed -e 's/.*CONFIG_USER_BIGENDIAN.*/CONFIG_USER_BIGENDIAN=y/' \
-e 's/.*CONFIG_BIGENDIAN.*/CONFIG_BIGENDIAN=y/' \
-e 's|CONFIG_ENV_DEFAULT_CMDLINE=|CONFIG_ENV_DEFAULT_CMDLINE=\"${CMDLINE}\"|' \
${WORKDIR}/defconfig > ${S}/.config
- else
+ elif [ "x$ac_cv_c_littleendian" = "xyes" -o "x$ac_cv_c_bigendian" = "xno" ]; then
sed -e 's/.*CONFIG_USER_LITTLEENDIAN.*/CONFIG_USER_LITTLEENDIAN=y/' \
-e 's/.*CONFIG_LITTLEENDIAN.*/CONFIG_LITTLEENDIAN=y/' \
-e 's/.*CONFIG_ENV_REGION_KERNEL_SWAP.*/CONFIG_ENV_REGION_KERNEL_SWAP=y/' \
-e 's|CONFIG_ENV_DEFAULT_CMDLINE=|CONFIG_ENV_DEFAULT_CMDLINE=\"${CMDLINE}\"|' \
${WORKDIR}/defconfig > ${S}/.config
+ else
+ oefatal do_configure cannot determine endianess
fi
oe_runmake oldconfig
}
do_populate_staging() {
install -d ${STAGING_LOADER_DIR}
- # FIXME - arch-arm should not be hard-coded
- if test '${ARCH_BYTE_SEX}' = be
- then
+ . ${CONFIG_SITE}
+ if [ "x$ac_cv_c_bigendian" = "xyes" -o "x$ac_cv_c_littleendian" = "xno" ]; then
+ # FIXME - arch-arm should not be hard-coded
cp src/arch-arm/rom/apex.bin ${STAGING_LOADER_DIR}/apex.bin
- else
+ elif [ "x$ac_cv_c_littleendian" = "xyes" -o "x$ac_cv_c_bigendian" = "xno" ]; then
+ # FIXME - arch-arm should not be hard-coded
devio '<<'src/arch-arm/rom/apex.bin >${STAGING_LOADER_DIR}/apex.bin 'xp $,4'
+ else
+ oefatal do_populate_staging cannot determine endianess
fi
}
--- /dev/null
+DESCRIPTION = "ARM Kernel Shim"
+SECTION = ""
+PRIORITY = "optional"
+HOMEPAGE = "http://wiki.buici.com/twiki/bin/view/Main/ApexBootloader"
+LICENSE = "GPL"
+PR = "r2"
+
+SRC_URI = "ftp://ftp.buici.com/pub/apex/apex-${PV}.tar.gz \
+ file://disable-commandline.patch;patch=1 \
+ file://config-nslu2.h \
+ file://config-nas100d.h \
+ file://config-dsmg600.h \
+ file://config-fsg3.h"
+
+S = ${WORKDIR}/apex-${PV}/arm-kernel-shim
+
+EXTRA_OEMAKE_append = " CROSS_COMPILE=${CROSS_DIR}/bin/${HOST_PREFIX}"
+
+oe_runmake() {
+ # NSLU2
+ cp ${WORKDIR}/config-nslu2.h ${S}/config.h
+ rm -f ${S}/main.o
+ oenote make ${PARALLEL_MAKE} TOOLS=${CROSS_DIR}/bin/${TARGET_PREFIX} PACKAGE=arm-kernel-shim-nslu2
+ make ${PARALLEL_MAKE} TOOLS=${CROSS_DIR}/bin/${TARGET_PREFIX} PACKAGE=arm-kernel-shim-nslu2 || die "oe_runmake failed"
+ # NAS100d
+ cp ${WORKDIR}/config-nas100d.h ${S}/config.h
+ rm -f ${S}/main.o
+ oenote make ${PARALLEL_MAKE} TOOLS=${CROSS_DIR}/bin/${TARGET_PREFIX} PACKAGE=arm-kernel-shim-nas100d
+ make ${PARALLEL_MAKE} TOOLS=${CROSS_DIR}/bin/${TARGET_PREFIX} PACKAGE=arm-kernel-shim-nas100d || die "oe_runmake failed"
+ # DSMG-600
+ cp ${WORKDIR}/config-dsmg600.h ${S}/config.h
+ rm -f ${S}/main.o
+ oenote make ${PARALLEL_MAKE} TOOLS=${CROSS_DIR}/bin/${TARGET_PREFIX} PACKAGE=arm-kernel-shim-dsmg600
+ make ${PARALLEL_MAKE} TOOLS=${CROSS_DIR}/bin/${TARGET_PREFIX} PACKAGE=arm-kernel-shim-dsmg600 || die "oe_runmake failed"
+ # FSG-3
+ cp ${WORKDIR}/config-fsg3.h ${S}/config.h
+ rm -f ${S}/main.o
+ oenote make ${PARALLEL_MAKE} TOOLS=${CROSS_DIR}/bin/${TARGET_PREFIX} PACKAGE=arm-kernel-shim-fsg3
+ make ${PARALLEL_MAKE} TOOLS=${CROSS_DIR}/bin/${TARGET_PREFIX} PACKAGE=arm-kernel-shim-fsg3 || die "oe_runmake failed"
+}
+
+do_populate_staging() {
+ install -d ${STAGING_LOADER_DIR}
+ . ${CONFIG_SITE}
+ cp ${S}/arm-kernel-shim-nslu2.bin ${STAGING_LOADER_DIR}/
+ cp ${S}/arm-kernel-shim-nas100d.bin ${STAGING_LOADER_DIR}/
+ cp ${S}/arm-kernel-shim-dsmg600.bin ${STAGING_LOADER_DIR}/
+ cp ${S}/arm-kernel-shim-fsg3.bin ${STAGING_LOADER_DIR}/
+}
--- /dev/null
+/* config.h
+
+ written by Marc Singer
+ 23 Jun 2006
+
+ Copyright (C) 2006 Marc Singer
+
+ -----------
+ DESCRIPTION
+ -----------
+
+*/
+
+#if !defined (__CONFIG_H__)
+# define __CONFIG_H__
+
+#define PHYS_PARAMS 0xc0000100 /* Address for the parameter list */
+
+#define RAM_BANK0_START 0x00000000
+#define RAM_BANK0_LENGTH 0x04000000
+
+//#define RAM_BANK1_START 0xd0000000
+//#define RAM_BANK1_LENGTH 0x10000000
+
+//#define COMMANDLINE\
+// "console=ttyAMA0 root=/dev/memblk0 rootfstype=jffs"
+
+#define MACH_TYPE 964
+
+#endif /* __CONFIG_H__ */
--- /dev/null
+/* config.h
+
+ written by Marc Singer
+ 23 Jun 2006
+
+ Copyright (C) 2006 Marc Singer
+
+ -----------
+ DESCRIPTION
+ -----------
+
+*/
+
+#if !defined (__CONFIG_H__)
+# define __CONFIG_H__
+
+#define PHYS_PARAMS 0xc0000100 /* Address for the parameter list */
+
+#define RAM_BANK0_START 0x00000000
+#define RAM_BANK0_LENGTH 0x04000000
+
+//#define RAM_BANK1_START 0xd0000000
+//#define RAM_BANK1_LENGTH 0x10000000
+
+//#define COMMANDLINE\
+// "console=ttyAMA0 root=/dev/memblk0 rootfstype=jffs"
+
+#define MACH_TYPE 1091
+
+#endif /* __CONFIG_H__ */
--- /dev/null
+/* config.h
+
+ written by Marc Singer
+ 23 Jun 2006
+
+ Copyright (C) 2006 Marc Singer
+
+ -----------
+ DESCRIPTION
+ -----------
+
+*/
+
+#if !defined (__CONFIG_H__)
+# define __CONFIG_H__
+
+#define PHYS_PARAMS 0xc0000100 /* Address for the parameter list */
+
+#define RAM_BANK0_START 0x00000000
+#define RAM_BANK0_LENGTH 0x04000000
+
+//#define RAM_BANK1_START 0xd0000000
+//#define RAM_BANK1_LENGTH 0x10000000
+
+//#define COMMANDLINE\
+// "console=ttyAMA0 root=/dev/memblk0 rootfstype=jffs"
+
+#define MACH_TYPE 865
+
+#endif /* __CONFIG_H__ */
--- /dev/null
+/* config.h
+
+ written by Marc Singer
+ 23 Jun 2006
+
+ Copyright (C) 2006 Marc Singer
+
+ -----------
+ DESCRIPTION
+ -----------
+
+*/
+
+#if !defined (__CONFIG_H__)
+# define __CONFIG_H__
+
+#define PHYS_PARAMS 0xc0000100 /* Address for the parameter list */
+
+#define RAM_BANK0_START 0x00000000
+#define RAM_BANK0_LENGTH 0x02000000
+
+//#define RAM_BANK1_START 0xd0000000
+//#define RAM_BANK1_LENGTH 0x10000000
+
+//#define COMMANDLINE\
+// "console=ttyAMA0 root=/dev/memblk0 rootfstype=jffs"
+
+#define MACH_TYPE 597
+
+#endif /* __CONFIG_H__ */
--- /dev/null
+--- arm-kernel-shim/main.c~ 2006-07-21 11:12:07.000000000 +0930
++++ arm-kernel-shim/main.c 2007-01-28 11:56:35.000000000 +1030
+@@ -47,7 +47,9 @@
+
+ #define NAKED __attribute__((naked))
+
++#if defined (COMMANDLINE)
+ const char __attribute__((section(".rodata"))) cmdline[] = COMMANDLINE;
++#endif
+
+ void NAKED __attribute__((section(".boot"))) boot (u32 r0, u32 r1, u32 r2)
+ {
+@@ -82,6 +84,7 @@
+ pv += H_SIZE(pv)*4;
+ #endif
+
++#if defined (COMMANDLINE)
+ /* Command line */
+ H_SIZE(pv) = tag_size(tag_cmdline) + (sizeof (cmdline)+1+3)/4;
+ H_TAG(pv) = ATAG_CMDLINE;
+@@ -91,6 +94,7 @@
+ P_CMDLINE(pv)->cmdline[i] = cmdline[i];
+ }
+ pv += H_SIZE(pv)*4;
++#endif
+
+ /* End */
+ H_SIZE(pv) = 0;
SECTION = "network"
LICENSE = "BSD"
RRECOMMENDS = "arpwatch-data"
-PR = "r1"
+PR = "r2"
SRC_URI = "ftp://ftp.ee.lbl.gov/arpwatch-${PV}.tar.gz \
file://05debian_fhs.patch;patch=1 \
FILES_arpwatch-data = "${datadir}/arpwatch/ethercodes.dat"
-do_install() {
+fakeroot do_install() {
install -d ${D}${bindir} ${D}${sbindir} ${D}${mandir}/man8 \
${D}${sysconfdir}/default \
${D}${sysconfdir}/init.d \
--- /dev/null
+DESCRIPTION = "bb, The portable aalib demo"
+HOMEPAGE = "http://aa-project.sourceforge.net/bb/"
+SECTION = "console/misc"
+LICENSE = "GPLv2"
+DEPENDS = "aalib"
+PR = "r1"
+
+SRC_URI = "http://prdownloads.sourceforge.net/aa-project/bb-1.2.tar.gz \
+ file://fix-compile.patch;patch=1"
+
+inherit autotools
+
+do_install() {
+ install -d ${D}${bindir}
+ install -m 755 bb ${D}${bindir}
+}
--- /dev/null
+Index: bb-1.2/bb.h
+===================================================================
+--- bb-1.2.orig/bb.h
++++ bb-1.2/bb.h
+@@ -23,7 +23,11 @@
+
+ #ifndef BB_H
+ #define BB_H
++//#include <aaint.h>
+ #include <aalib.h>
++struct parameters {
++ unsigned int p[AA_NPARAMS];
++};
+ #include "image.h"
+ #include "timers.h"
+ struct font {
+Index: bb-1.2/textform.c
+===================================================================
+--- bb-1.2.orig/textform.c
++++ bb-1.2/textform.c
+@@ -155,41 +155,41 @@ static char *text = "#cWell we've reache
+ "#c\n"
+ "#bThree goals of AA-Project:#n"
+ "\n\n"
+-"#f1)Port all important software (like Doom, Second Reality, X windows etc..) on new AA-lib.
+-
+-2)Port AA-lib on all available platforms (mainly ZX-Spectrum and Sharp).
+-
+-3)Force IBM to start manufacturing MDA cards again.
+-
+-AA-project was started by Jan Hubicka. In that times just few people knew about \
+-it. Then a new demo named BB has been relased to show the power \
+-of AA-lib technology. Now the project is freely available and anyone can help.
+-
+-Just join our mailing list: #baa#n at#b horac.ta.jcu.cz.#n by sending #bsubscribe aa#n to majordomo.
+-
+-All programs covered under AA-project can be obtained at
+-#c#bftp://ftp.ta.jcu.cz://pub/aa#n
+-#c
+-Or just browse our homepage at #bhttp://www.ta.jcu.cz://aa#n. Ton of \
+-examples of ascii-art generated by aalib, pointers to other AA-Project \
+-resources etc.
+-
+- We decided to distribute all of our aa-related programs freely (see \
+-COPYING for details). But if you want to help us develop more such software \
+-send a small amount (or big one ;-) to AA/BB maintainer address:
+-
+-Kamil Toman
+-CS Armady 1930, Tabor
+-390 03
+-Czech republic
+-
+-and contact us at:
+-
+-kupsaf@feld.cvut.cz (Filip Kupsa)
+-hubicka@paru.cas.cz (Jan Hubicka)
+-titania@horac.ta.jcu.cz (Mojmir Svoboda)
+-toman@horac.ta.jcu.cz (Kamil Toman)
+-#f"
++"#f1)Port all important software (like Doom, Second Reality, X windows etc..) on new AA-lib.\n"
++"\n"
++"2)Port AA-lib on all available platforms (mainly ZX-Spectrum and Sharp).\n"
++"\n"
++"3)Force IBM to start manufacturing MDA cards again.\n"
++"\n"
++"AA-project was started by Jan Hubicka. In that times just few people knew about "
++"it. Then a new demo named BB has been relased to show the power "
++"of AA-lib technology. Now the project is freely available and anyone can help.\n"
++"\n"
++"Just join our mailing list: #baa#n at#b horac.ta.jcu.cz.#n by sending #bsubscribe aa#n to majordomo.\n"
++"\n"
++"All programs covered under AA-project can be obtained at\n"
++"#c#bftp://ftp.ta.jcu.cz://pub/aa#n\n"
++"#c\n"
++"Or just browse our homepage at #bhttp://www.ta.jcu.cz://aa#n. Ton of "
++"examples of ascii-art generated by aalib, pointers to other AA-Project "
++"resources etc. \n"
++" \n"
++" We decided to distribute all of our aa-related programs freely (see "
++"COPYING for details). But if you want to help us develop more such software "
++"send a small amount (or big one ;-) to AA/BB maintainer address: \n"
++"\n"
++"Kamil Toman\n"
++"CS Armady 1930, Tabor\n"
++"390 03\n"
++"Czech republic\n"
++"\n"
++"and contact us at:\n"
++"\n"
++"kupsaf@feld.cvut.cz (Filip Kupsa)\n"
++"hubicka@paru.cas.cz (Jan Hubicka)\n"
++"titania@horac.ta.jcu.cz (Mojmir Svoboda)\n"
++"toman@horac.ta.jcu.cz (Kamil Toman)\n"
++"#f"
+ "\n"
+ "#l\n"
+ "#c#bAvailable programs#n\n"
+@@ -245,37 +245,37 @@ toman@horac.ta.jcu.cz (Kamil Toman)
+ "\n#l"
+ "\n"
+ "#c#bThe AA-Lib#n\n"
+-"#f#c
+-AA-lib is a low level gfx library just as many other libraries are. The \
+-main difference is that AA-lib does not require graphics device. In fact, \
+-there is no graphical output possible. AA-lib replaces those old-fashioned \
+-output methods with powerful ascii-art renderer. Now my linux boots \
+-with a nice penguin logo at secondary display (yes! Like Win95 does:) \
+-AA-lib API is designed to be similar to other graphics libraries. Learning \
+-a new API would be a piece of cake! \
+-#f
+-
+-#l
+-#c#bThe history#n
+-#f
+-Once upon a time we've (my friend Kamil and I) bought two old Herculeses \
+-as secondary monitors. We didn't know for that time that our Diamond \
+-Stealths 64 cards would become obsolete soon. Next day we downloaded \
+-the logo of Linux Texas Users Group \
+-- nice silly penguin looking like a cowboy! It was so exciting logo ... we \
+-decided that we couldn't live without it and we wanted to see it every time \
+-at a boot time as a logo on our secondary monitors. There was a small problem \
+-- Hercules doesn't support color graphics. So we decided to convert an image \
+-to ascii art using netpbm tools.
+-
+-The output was very ugly because the converting algorithm was absolutly stupid. \
+-During the night I designed a new convertor that used a font bitmap for \
+-creating aproximation table. The output wasn't very good since the algorithm \
+-wasn't so well tuned. Many months this small piece of code was waiting on my \
+-disc for the day \"D\". Meanwhile I started a new project XaoS (a fractal zoomer) \
+-with my friend Thomas. And then I got an idea: Ascii Art Mandelbrots! \
+-I was really impressed by the result! XaoS was faster, portable and looking \
+-much better than ever before. I found a new way to go... "
++"#f#c"
++"AA-lib is a low level gfx library just as many other libraries are. The "
++"main difference is that AA-lib does not require graphics device. In fact, "
++"there is no graphical output possible. AA-lib replaces those old-fashioned "
++"output methods with powerful ascii-art renderer. Now my linux boots "
++"with a nice penguin logo at secondary display (yes! Like Win95 does:) "
++"AA-lib API is designed to be similar to other graphics libraries. Learning "
++"a new API would be a piece of cake! "
++"#f"
++"\n"
++"#l"
++"#c#bThe history#n"
++"#f"
++"Once upon a time we've (my friend Kamil and I) bought two old Herculeses "
++"as secondary monitors. We didn't know for that time that our Diamond "
++"Stealths 64 cards would become obsolete soon. Next day we downloaded "
++"the logo of Linux Texas Users Group "
++"- nice silly penguin looking like a cowboy! It was so exciting logo ... we "
++"decided that we couldn't live without it and we wanted to see it every time "
++"at a boot time as a logo on our secondary monitors. There was a small problem "
++"- Hercules doesn't support color graphics. So we decided to convert an image "
++"to ascii art using netpbm tools."
++"\n"
++"The output was very ugly because the converting algorithm was absolutly stupid. "
++"During the night I designed a new convertor that used a font bitmap for "
++"creating aproximation table. The output wasn't very good since the algorithm "
++"wasn't so well tuned. Many months this small piece of code was waiting on my "
++"disc for the day \"D\". Meanwhile I started a new project XaoS (a fractal zoomer) "
++"with my friend Thomas. And then I got an idea: Ascii Art Mandelbrots! "
++"I was really impressed by the result! XaoS was faster, portable and looking "
++"much better than ever before. I found a new way to go... "
+ "#c\n"
+ "#f\n"
+ "\n"
--- /dev/null
+DESCRIPTION = "Linux Bluetooth Stack Userland Libaries."
+SECTION = "libs"
+PRIORITY = "optional"
+HOMEPAGE = "http://www.bluez.org"
+LICENSE = "GPL"
+PR = "r0"
+
+SRC_URI = "http://bluez.sourceforge.net/download/bluez-libs-${PV}.tar.gz"
+
+inherit autotools pkgconfig
+
+HEADERS = "bluetooth.h bnep.h cmtp.h hci.h hci_lib.h hidp.h l2cap.h rfcomm.h sco.h sdp.h sdp_lib.h"
+
+do_stage() {
+ oe_libinstall -a -so -C src libbluetooth ${STAGING_LIBDIR}
+
+ install -d ${STAGING_INCDIR}/bluetooth/
+ for f in ${HEADERS}
+ do
+ install -m 0644 include/$f ${STAGING_INCDIR}/bluetooth/$f
+ done
+}
--- /dev/null
+require bluez-libs.inc
--- /dev/null
+Index: bluez-utils-3.9/tools/hciattach.c
+===================================================================
+--- bluez-utils-3.9.orig/tools/hciattach.c 2007-01-28 21:16:48.000000000 +0100
++++ bluez-utils-3.9/tools/hciattach.c 2007-01-29 22:51:30.000000000 +0100
+@@ -59,6 +59,8 @@
+ #define HCI_UART_3WIRE 2
+ #define HCI_UART_H4DS 3
+
++#include "ti_bts.h"
++
+ struct uart_t {
+ char *type;
+ int m_id;
+@@ -68,6 +70,7 @@
+ int speed;
+ int flags;
+ int (*init) (int fd, struct uart_t *u, struct termios *ti);
++ char *bts; /* bluetooth script */
+ };
+
+ #define FLOW_CTL 0x0001
+@@ -257,6 +260,114 @@
+ return 0;
+ }
+
++static int brf6150(int fd, struct uart_t *u, struct termios *ti)
++{
++ bts_t *bfp;
++ int i;
++ unsigned long vers;
++ unsigned char actionbuf[256];
++ unsigned char resp[128]; /* Response */
++ unsigned long count;
++ unsigned short atype;
++
++ if (u->bts == NULL) /* no script, ignore */
++ return 0;
++
++ bfp = bts_load_script( u->bts, &vers );
++ if (bfp == NULL)
++ return -1;
++
++ fprintf( stderr, "Loading BTS script version %lu\n", vers );
++
++ while ((count = bts_next_action( bfp, actionbuf,
++ sizeof actionbuf - 1, &atype )) != 0) {
++ if (atype == ACTION_REMARKS) {
++ if (actionbuf[0] != 0)
++ fprintf( stderr, "%s\n", actionbuf );
++ }
++ else if (atype == ACTION_SEND_COMMAND) {
++#if 0
++ fprintf( stderr, "ACTION_SEND_COMMAND: ", (int)atype );
++ for (i=0; i<count; i++) {
++ fprintf( stderr, "0x%02x ", actionbuf[i] );
++ }
++ fprintf( stderr, "\n" );
++#endif
++ int n;
++ n = write(fd, actionbuf, count);
++ if (n < 0 || n < count) {
++ perror("Failed to write TI action command");
++ return -1;
++ }
++ }
++ else if (atype == ACTION_WAIT_EVENT) {
++ action_wait_t *wait = (action_wait_t *)actionbuf;
++#if 0
++ fprintf( stderr, "ACTION_WAIT_EVENT: %u msec, %u size, data = ", wait->msec, wait->size );
++ for (i=0; i<wait->size; i++) {
++ fprintf( stderr, "0x%02x ", wait->data[i] );
++ }
++ fprintf( stderr, "\n" );
++#endif
++ usleep(wait->msec); /* seems they give usec, not msec */
++ /* Read reply. */
++ if ((count = read_hci_event(fd, resp, sizeof resp)) < 0) {
++ perror("Failed to read TI command response");
++ return -1;
++ }
++ if (count < wait->size) {
++ fprintf( stderr, "TI command response is short.");
++ }
++ for (i=0; i<wait->size; i++) {
++ if (i == 3) continue; /* ignore */
++ if (resp[i] != wait->data[i]) {
++ fprintf( stderr, "TI command response does not match expected result.\n" );
++ }
++ }
++ }
++ else if (atype == ACTION_SERIAL_PORT_PARAMETERS) {
++ action_serial_t *sercmd = (action_serial_t *)actionbuf;
++
++ /* Set actual baudrate */
++ fprintf( stderr,
++ "BTS changing baud rate to %u, flow control to %u\n",
++ sercmd->baud, sercmd->flow_control );
++
++ tcflush(fd, TCIOFLUSH);
++
++ if (sercmd->flow_control)
++ ti->c_cflag |= CRTSCTS;
++ else
++ ti->c_cflag &= ~CRTSCTS;
++ if (tcsetattr(fd, TCSANOW, ti) < 0) {
++ perror("Can't set port settings");
++ return -1;
++ }
++
++ u->speed = sercmd->baud;
++
++ tcflush(fd, TCIOFLUSH);
++ if (set_speed(fd, ti, sercmd->baud) < 0) {
++ perror("Can't set baud rate");
++ return -1;
++ }
++ }
++ else if (atype == ACTION_DELAY) {
++ action_delay_t *delay = (action_delay_t *)actionbuf;
++ usleep(delay->msec); /* seems they give usec, not msec */
++ }
++ else {
++ fprintf( stderr, "BTS action type = %d: ", (int)atype );
++ for (i=0; i<count; i++) {
++ fprintf( stderr, "0x%02x ", actionbuf[i] );
++ }
++ fprintf( stderr, "\n" );
++ }
++ }
++ bts_unload_script( bfp );
++ return 0;
++}
++
+ static int texas(int fd, struct uart_t *u, struct termios *ti)
+ {
+ struct timespec tm = {0, 50000};
+@@ -297,15 +408,26 @@
+ } while (resp[4] != cmd[1] && resp[5] != cmd[2]);
+
+ /* Verify manufacturer */
+- if ((resp[11] & 0xFF) != 0x0d)
++ if (resp[11] != 0x0d)
+ fprintf(stderr,"WARNING : module's manufacturer is not Texas Instrument\n");
+
+ /* Print LMP version */
+- fprintf(stderr, "Texas module LMP version : 0x%02x\n", resp[10] & 0xFF);
++ fprintf(stderr, "TI module LMP version : 0x%02x\n", resp[10]);
+
+ /* Print LMP subversion */
+- fprintf(stderr, "Texas module LMP sub-version : 0x%02x%02x\n", resp[14] & 0xFF, resp[13] & 0xFF);
+-
++ fprintf(stderr, "TI module LMP sub-version : 0x%02x%02x\n", resp[14], resp[13]);
++ if ((resp[14] >> 2) == 3) {
++ int err;
++ nanosleep(&tm, NULL);
++
++ /* BRF6150 */
++ if ((err=brf6150( fd, u, ti )) != 0) {
++ fprintf( stderr, "TI script failed (err=%d)\n",
++ err );
++ return -1;
++ }
++ }
++
+ nanosleep(&tm, NULL);
+ return 0;
+ }
+@@ -1128,7 +1250,7 @@
+ {
+ printf("hciattach - HCI UART driver initialization utility\n");
+ printf("Usage:\n");
+- printf("\thciattach [-n] [-p] [-b] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow]\n");
++ printf("\thciattach [-n] [-p] [-b] [-t timeout] [-s initial_speed] [-S bts-script] <tty> <type | id> [speed] [flow|noflow]\n");
+ printf("\thciattach -l\n");
+ }
+
+@@ -1143,11 +1265,12 @@
+ struct sigaction sa;
+ struct pollfd p;
+ char dev[PATH_MAX];
++ char *bts = NULL;
+
+ detach = 1;
+ printpid = 0;
+
+- while ((opt=getopt(argc, argv, "bnpt:s:l")) != EOF) {
++ while ((opt=getopt(argc, argv, "bnpt:s:S:l")) != EOF) {
+ switch(opt) {
+ case 'b':
+ send_break = 1;
+@@ -1169,6 +1292,10 @@
+ init_speed = atoi(optarg);
+ break;
+
++ case 'S':
++ bts = optarg;
++ break;
++
+ case 'l':
+ for (i = 0; uart[i].type; i++) {
+ printf("%-10s0x%04x,0x%04x\n", uart[i].type,
+@@ -1240,6 +1367,8 @@
+ if (init_speed)
+ u->init_speed = init_speed;
+
++ u->bts = bts;
++
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_flags = SA_NOCLDSTOP;
+ sa.sa_handler = sig_alarm;
+Index: bluez-utils-3.9/tools/Makefile.am
+===================================================================
+--- bluez-utils-3.9.orig/tools/Makefile.am 2007-01-28 21:16:48.000000000 +0100
++++ bluez-utils-3.9/tools/Makefile.am 2007-01-29 22:54:22.000000000 +0100
+@@ -37,7 +37,7 @@
+
+ noinst_PROGRAMS = hcisecfilter ppporc
+
+-hciattach_SOURCES = hciattach.c hciattach_st.c
++hciattach_SOURCES = hciattach.c hciattach_st.c ti_bts.h ti_bts.c
+ hciattach_LDADD = @BLUEZ_LIBS@
+
+ hciconfig_SOURCES = hciconfig.c csr.h csr.c
+Index: bluez-utils-3.9/tools/ti_bts.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ bluez-utils-3.9/tools/ti_bts.h 2007-01-29 22:51:30.000000000 +0100
+@@ -0,0 +1,116 @@
++/*
++ * Copyright (c) 2005 Texas Instruments, Inc.
++ * Ported by SDG Systems, LLC
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation;
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
++ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
++ * IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
++ * CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ * ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
++ * COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
++ * SOFTWARE IS DISCLAIMED.
++ *
++ */
++
++#ifndef BT_SCRIPT_H
++#define BT_SCRIPT_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * Define the interface of Bluetooth Script
++ */
++
++typedef void bts_t;
++
++
++#define ACTION_SEND_COMMAND 1 /* Send out raw data (as is) */
++#define ACTION_WAIT_EVENT 2 /* Wait for data */
++#define ACTION_SERIAL_PORT_PARAMETERS 3
++#define ACTION_DELAY 4
++#define ACTION_RUN_SCRIPT 5
++#define ACTION_REMARKS 6
++
++/*
++ * Structure for ACTION_SEND_COMMAND
++ */
++typedef struct tagCActionCommand
++{
++ unsigned char data[1]; /* Data to send */
++} action_command_t;
++
++/*
++ * Structure for ACTION_WAIT_EVENT
++ */
++typedef struct tagCActionWaitEvent
++{
++ unsigned long msec; /* in milliseconds */
++ unsigned long size;
++ unsigned char data[1]; /* Data to wait for */
++} action_wait_t;
++
++
++/*
++ * Structure for ACTION_SERIAL_PORT_PARAMETERS
++ */
++typedef struct tagCActionSerialPortParameters
++{
++ unsigned long baud;
++ unsigned long flow_control;
++} action_serial_t;
++
++/* Flow Control Type */
++#define FCT_NONE 0
++#define FCT_HARDWARE 1
++
++#define DONT_CHANGE 0xFFFFFFFF /* For both baud rate and flow control */
++
++
++/*
++ * Structure for ACTION_DELAY
++ */
++typedef struct tagCActionDelay
++{
++ unsigned long msec; /* in milliseconds */
++} action_delay_t;
++
++/*
++ * Structure for ACTION_RUN_SCRIPT
++ */
++typedef struct tagCActionRunScript
++{
++ char filename[1];
++} action_run_t;
++
++/*
++ * Structure for ACTION_REMARKS
++ */
++typedef struct tagCActionRemarks
++{
++ char m_szRemarks[1];
++} action_remarks_t;
++
++
++const char *cis_create_filename(const unsigned char* cmdparms);
++bts_t * bts_load_script(const char* fname, unsigned long* version);
++unsigned long bts_next_action(const bts_t* bts_fp, unsigned char* action_buf,
++ unsigned long nMaxSize, unsigned short* ptype);
++void bts_unload_script(bts_t* bts_fp);
++
++#ifdef __cplusplus
++};
++#endif
++
++#endif /* BT_SCRIPT_H */
++
+Index: bluez-utils-3.9/tools/ti_bts.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ bluez-utils-3.9/tools/ti_bts.c 2007-01-29 22:51:30.000000000 +0100
+@@ -0,0 +1,149 @@
++/*
++ * Copyright (c) 2005 Texas Instruments, Inc.
++ * Ported by SDG Systems, LLC
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation;
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
++ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
++ * IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
++ * CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ * ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
++ * COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
++ * SOFTWARE IS DISCLAIMED.
++ *
++ */
++
++
++#include <stdio.h>
++#include <stdlib.h>
++#include "ti_bts.h"
++
++#ifndef MAKEWORD
++#define MAKEWORD(a, b) ((unsigned short)(((unsigned char)(a)) | ((unsigned short)((unsigned char)(b))) << 8))
++#endif
++
++#define TI_MANUFACTURER_ID 13
++
++/*
++ * Common Init Script specific
++ */
++const char *
++cis_create_filename(const unsigned char* cmdparms)
++{
++ static char bts_file[50];
++
++ /* Check for TI's id */
++ unsigned short manfid = MAKEWORD(cmdparms[8], cmdparms[9]);
++
++ if (TI_MANUFACTURER_ID == manfid) {
++ unsigned short version = MAKEWORD(cmdparms[10], cmdparms[11]);
++
++ unsigned short chip = (version & 0x7C00) >> 10;
++ unsigned short min_ver = (version & 0x007F);
++ unsigned short maj_ver = (version & 0x0380) >> 7;
++
++ if (0 != (version & 0x8000)) {
++ maj_ver |= 0x0008;
++ }
++
++ sprintf( bts_file, "TIInit_%d.%d.%d.bts",
++ (int)chip, (int)maj_ver, (int)min_ver);
++
++ return &bts_file[0];
++ }
++ return NULL;
++}
++
++typedef struct tagCHeader
++{
++ unsigned long magic;
++ unsigned long version;
++ unsigned char future[24];
++} cheader_t;
++
++
++/* The value 0x42535442 stands for (in ASCII) BTSB */
++/* which is Bluetooth Script Binary */
++#define FILE_HEADER_MAGIC 0x42535442
++
++
++bts_t *
++bts_load_script(const char* fname, unsigned long* version)
++{
++ bts_t* bts = NULL;
++ FILE* fp = fopen(fname, "rb");
++
++ if (NULL != fp) {
++ /* Read header */
++ cheader_t header;
++
++ /* Read header */
++ if (1 == fread(&header, sizeof(header), 1, fp)) {
++ /* Check magic number for correctness */
++ if (header.magic == FILE_HEADER_MAGIC) {
++ /* If user wants the version number */
++ if (NULL != version) {
++ *version = header.version;
++ }
++ bts = (bts_t*)fp;
++ }
++ }
++ /* If failed reading the file, close it */
++ if (NULL == bts) {
++ fclose(fp);
++ }
++ }
++ return bts;
++}
++
++unsigned long
++bts_next_action(const bts_t* bts_fp, unsigned char* action_buf,
++ unsigned long nMaxSize, unsigned short* ptype)
++{
++ unsigned long bytes = 0;
++ FILE* fp = (FILE*)bts_fp;
++ unsigned char action_hdr[4];
++
++ if (bts_fp == NULL)
++ return 0;
++
++ /* Each Action has the following: */
++ /* UINT16 type of this action */
++ /* UINT16 size of rest */
++ /* BYTE[] action buffer (for HCI, includes the type byte e.g. 1 for hci command) */
++
++ if (1 == fread(&action_hdr[0], sizeof(action_hdr), 1, fp)) {
++ unsigned short type = *(unsigned short*)&action_hdr[0];
++ unsigned short size = *(unsigned short*)&action_hdr[2];
++
++ if (size <= nMaxSize) {
++ int nread = fread(action_buf, sizeof(action_buf[0]), size, fp);
++
++ if (nread == size) {
++ *ptype = type;
++ bytes = (unsigned long)size;
++ }
++ }
++ }
++
++ return bytes;
++}
++
++void
++bts_unload_script(bts_t* bts_fp)
++{
++ FILE* fp = (FILE*)bts_fp;
++
++ if (NULL != fp) {
++ fclose(fp);
++ }
++}
++
DESCRIPTION = "Linux Bluetooth Stack Userland Utilities."
SECTION = "console"
PRIORITY = "optional"
-DEPENDS = "bluez-libs-${PV} pcmcia-cs"
-RPROVIDES_${PN} = "bluez-pan bluez-sdp bluez-utils"
+DEPENDS = "bluez-libs-${PV} dbus"
+PROVIDES = "bluez-utils-dbus"
+RPROVIDES_${PN} = "bluez-pan bluez-sdp bluez-utils-dbus"
+RREPLACES = "bluez-utils-dbus"
+RCONFLICTS_${PN} = "bluez-utils-nodbus"
LICENSE = "GPL"
SRC_URI = "http://bluez.sourceforge.net/download/bluez-utils-${PV}.tar.gz \
- file://base.patch;patch=1 \
- file://blueboxes.patch;patch=1 \
- file://no-user-include.patch;patch=1 \
file://hcid.conf \
- file://bluetooth.default \
- file://bluetooth.conf \
- file://02dtl1_cs.sh"
+ file://02dtl1_cs.sh \
+ file://hciattach-ti-bts.patch;patch=1"
# Almost all serial CF cards w/ manfid 0x0000,0x0000 seem to use the bcs protocol
# Let's default to that instead of 'any' until further notice...
S = "${WORKDIR}/bluez-utils-${PV}"
-# We don't depend on openobex, fuse, alsa or usb but we set paths into staging
-# otherwise /usr/lib and /usr/include make it onto command lines with unpredictable results
-# Ideally acinclude.m4 needs fixing
-EXTRA_OECONF = "--with-bluez-libs=${STAGING_LIBDIR} --with-bluez-includes=${STAGING_INCDIR} \
- --enable-pcmcia --enable-initscripts --enable-bcm203x --enable-hid2hci \
- --disable-obex --disable-alsa \
- --with-openobex=${STAGING_DIR}/${HOST_SYS} --with-fuse=${STAGING_DIR}/${HOST_SYS} \
- --with-alsa=${STAGING_DIR}/${HOST_SYS} --with-usb=${STAGING_DIR}/${HOST_SYS} \
- --with-bluez=${STAGING_LIBDIR}/${HOST_SYS}"
+EXTRA_OECONF = "--enable-initscripts --enable-bcm203x --enable-hid2hci"
+# --enable-obex enable OBEX support
+# --enable-alsa enable ALSA support
+# --enable-cups install CUPS backend support
+# --enable-bccmd install BCCMD interface utility
+# --enable-avctrl install Audio/Video control utility
+# --enable-hid2hci install HID mode switching utility
+# --enable-dfutool install DFU firmware upgrade utility
inherit autotools update-rc.d
INITSCRIPT_NAME = "bluetooth"
INITSCRIPT_PARAMS = "defaults 23 19"
-do_compile_prepend() {
- find ${S} -name Makefile | xargs sed -i 's:/usr/include:${STAGING_INCDIR}:'
-}
-
do_install_append() {
- install -d ${D}${base_sbindir} ${D}${base_bindir}/ ${D}${sysconfdir}/apm/event.d/
+ install -d ${D}${base_sbindir} ${D}${base_bindir}/ ${D}${sysconfdir}/apm/event.d/
mv ${D}${sbindir}/* ${D}${base_sbindir}/
mv ${D}${bindir}/* ${D}${base_bindir}/
rmdir ${D}${bindir} ${D}${sbindir}
chmod u+s ${D}${base_sbindir}/hciattach ${D}${base_sbindir}/hciconfig
- chmod 755 ${D}${sysconfdir}/pcmcia/bluetooth
install -m 0644 ${WORKDIR}/hcid.conf ${D}${sysconfdir}/bluetooth/
- install -m 0644 ${WORKDIR}/bluetooth.default ${D}${sysconfdir}/default/bluetooth
- cat ${WORKDIR}/bluetooth.conf >> ${D}${sysconfdir}/pcmcia/bluetooth.conf
install -m 0755 ${WORKDIR}/02dtl1_cs.sh ${D}${sysconfdir}/apm/event.d/
}
CONFFILES_${PN} = "${sysconfdir}/bluetooth/hcid.conf ${sysconfdir}/bluetooth/rfcomm.conf \
- ${sysconfdir}/bluetooth/pin ${sysconfdir}/default/bluetooth"
+ ${sysconfdir}/default/bluetooth"
-PACKAGES =+ "${PN}-ciptool ${PN}-bluepin"
+PACKAGES =+ "${PN}-ciptool"
FILES_${PN}-ciptool = "/bin/ciptool"
-FILES_${PN}-bluepin = "/bin/bluepin"
+RREPLACES_${PN}-ciptool = "bluez-utils-dbus-ciptool"
+RCONFLICTS_${PN}-ciptool = "bluez-utils-dbus-ciptool bluez-utils-nodbus"
--- /dev/null
+require bluez-utils.inc
--- /dev/null
+DESCRIPTION = "Portable Bandwidth Monitor and rate estimator"
+HOMEPAGE = "http://people.suug.ch/~tgr/bmon/"
+SECTION = "console/utilities"
+LICENSE = "MIT"
+# only works with libnl-0.5.0
+DEPENDS = "libnl"
+PR = "r0"
+
+SRC_URI = "http://people.suug.ch/~tgr/bmon/files/bmon-2.1.0.tar.gz \
+ file://no-strip.patch;patch=1"
+
+inherit autotools
+
+do_compile() {
+ oe_runmake
+}
--- /dev/null
+Index: bmon-2.1.0/GNUmakefile
+===================================================================
+--- bmon-2.1.0.orig/GNUmakefile
++++ bmon-2.1.0/GNUmakefile
+@@ -50,7 +50,7 @@ distclean: clean
+ install:
+ ./install-sh -d -m 0755 $(DESTDIR)$(prefix)/bin
+ ./install-sh -d -m 0755 $(DESTDIR)$(mandir)/man1
+- ./install-sh -c -s -m 0755 src/bmon $(DESTDIR)$(prefix)/bin
++ ./install-sh -c -m 0755 src/bmon $(DESTDIR)$(prefix)/bin
+ ./install-sh -c -m 0644 man/bmon.1 $(DESTDIR)$(mandir)/man1
+
+ show: Makefile.opts
+++ /dev/null
-#This is a development snapshot, so lets hint OE to use the releases
-DEFAULT_PREFERENCE = "-1"
-
-require cairo.inc
-
-SRC_URI = "http://cairographics.org/snapshots/cairo-${PV}.tar.gz"
-
--- /dev/null
+#This is a development snapshot, so lets hint OE to use the releases
+DEFAULT_PREFERENCE = "-1"
+
+require cairo.inc
+
+SRC_URI = "http://cairographics.org/snapshots/cairo-${PV}.tar.gz \
+ file://cairo-surface-cache.patch;patch=1"
+
+PR = "r1"
+
DESCRIPTION = "Cairo graphics library"
LICENSE = "MPL LGPL"
-PV = "1.3.11+git${SRCDATE}"
+PV = "1.3.13+git${SRCDATE}"
SRC_URI = "git://git.cairographics.org/git/cairo;protocol=git \
"
--- /dev/null
+Hi,
+
+Last month, Xan xtraced[1] cairo text drawing (using xlib), and noticed
+that cairo creates (and afterward destroys) a 1x1 pixmap (a cairo
+surface) every time it draws some text. Xft doesn't do this.
+
+Carl and Behdad suggested ways to, like Xft, cache surfaces so as not to
+have to recreate them all the time.
+
+As suggested by Carl in the same thread, I first investigated
+per-pattern caching of acquired surfaces. This didn't work as patterns
+mostly get copied before their surfaces are requested.
+
+Attached patch adds a simple 16-entry static cache to
+_cairo_pattern_acquire_surface_for_solid(). It still needs work, however
+this already yields a speedup[2] of 12% when drawing text using GTK+
+2.10, exceeding the performance of GTK+ 2.6. Yay!
+
+Comments appreciated,
+
+Jorn
+
+diff --git a/src/cairo-pattern.c b/src/cairo-pattern.c
+index b488d1f..be63faf 100644
+--- a/src/cairo-pattern.c
++++ b/src/cairo-pattern.c
+@@ -1020,6 +1020,8 @@ _cairo_pattern_acquire_surface_for_gradi
+ return status;
+ }
+
++#define MAX_CACHE_SIZE 16
++
+ static cairo_int_status_t
+ _cairo_pattern_acquire_surface_for_solid (cairo_solid_pattern_t *pattern,
+ cairo_surface_t *dst,
+@@ -1030,13 +1032,50 @@ _cairo_pattern_acquire_surface_for_solid
+ cairo_surface_t **out,
+ cairo_surface_attributes_t *attribs)
+ {
+- *out = _cairo_surface_create_similar_solid (dst,
+- CAIRO_CONTENT_COLOR_ALPHA,
+- 1, 1,
+- &pattern->color);
+- if ((*out)->status)
++ /* We have a small cache here, because we don't want to constantly
++ * recreate surfaces for simple solid colors */
++ static struct {
++ cairo_color_t color;
++ cairo_surface_t *surface;
++ } cache[MAX_CACHE_SIZE];
++ static int cache_size = 0;
++
++ cairo_surface_t *surface;
++ int i;
++
++ /* Check cache first */
++ for (i = 0; i < cache_size; i++)
++ if (cache[i].surface->backend == dst->backend &&
++ memcmp (&cache[i].color,
++ &pattern->color,
++ sizeof (cairo_color_t)) == 0)
++ goto DONE;
++
++ /* Not cached, need to create new */
++ surface = _cairo_surface_create_similar_solid (dst,
++ CAIRO_CONTENT_COLOR_ALPHA,
++ 1, 1,
++ &pattern->color);
++ if (surface->status)
+ return CAIRO_STATUS_NO_MEMORY;
+
++ /* Cache new */
++ if (cache_size < MAX_CACHE_SIZE)
++ cache_size++;
++ else {
++ i = random () % MAX_CACHE_SIZE;
++
++ /* Evict old */
++ cairo_surface_destroy (cache[i].surface);
++ }
++
++ cache[i].color = pattern->color;
++ cache[i].surface = surface;
++
++DONE:
++
++ *out = cairo_surface_reference (cache[i].surface);
++
+ attribs->x_offset = attribs->y_offset = 0;
+ cairo_matrix_init_identity (&attribs->matrix);
+ attribs->extend = CAIRO_EXTEND_REPEAT;
--- /dev/null
+DESCRIPTION = "Chibitracker is an impulse tracker clone based on SDL"
+LICENSE = "GPL"
+HOMEPAGE = "http://www.chibitracker.com"
+SECTION = "multimedia"
+AUTHOR = "Juan Linietsky <reduzio@gmail.com>"
+DEPENDS = "virtual/libsdl libsdl-mixer"
+PV = "0.9.9+svn${SRCDATE}"
+
+SRC_URI = "svn://svn.berlios.de/chibitracker;module=trunk"
+S = "${WORKDIR}/trunk"
+
+inherit scons
+
--- /dev/null
+--- drm/linux-core/Makefile 2005-06-03 21:02:54.000000000 +0100
++++ drm/linux-core/Makefile 2005-06-17 21:40:34.000000000 +0100
+@@ -173,7 +173,7 @@
+ all: modules
+
+ modules: includes
+- make -C $(LINUXDIR) $(GETCONFIG) SUBDIRS=`pwd` DRMSRCDIR=`pwd` modules
++ $(MAKE) -C $(LINUXDIR) $(GETCONFIG) SUBDIRS=`pwd` DRMSRCDIR=`pwd` modules
+
+ ifeq ($(HEADERFROMBOOT),1)
+
+@@ -243,7 +243,7 @@
+ rm -rf $(CLEANFILES)
+
+ $(MODULE_LIST)::
+- make DRM_MODULES=$@ modules
++ $(MAKE) DRM_MODULES=$@ modules
+
+ # Build test utilities
+
do_stage() {
autotools_stage_all
}
-
-
--- /dev/null
+SECTION = "x11/base"
+LICENSE = "MIT"
+SRC_URI = "http://dri.freedesktop.org/libdrm/libdrm-${PV}.tar.bz2"
+PROVIDES = "drm"
+
+inherit autotools pkgconfig
+
+do_stage() {
+ autotools_stage_all
+}
+++ /dev/null
---- drm/linux-core/Makefile 2005-06-03 21:02:54.000000000 +0100
-+++ drm/linux-core/Makefile 2005-06-17 21:40:34.000000000 +0100
-@@ -173,7 +173,7 @@
- all: modules
-
- modules: includes
-- make -C $(LINUXDIR) $(GETCONFIG) SUBDIRS=`pwd` DRMSRCDIR=`pwd` modules
-+ $(MAKE) -C $(LINUXDIR) $(GETCONFIG) SUBDIRS=`pwd` DRMSRCDIR=`pwd` modules
-
- ifeq ($(HEADERFROMBOOT),1)
-
-@@ -243,7 +243,7 @@
- rm -rf $(CLEANFILES)
-
- $(MODULE_LIST)::
-- make DRM_MODULES=$@ modules
-+ $(MAKE) DRM_MODULES=$@ modules
-
- # Build test utilities
-
+++ /dev/null
-DESCRIPTION = "E17 - the Enlightenment Window Mananger"
-DEPENDS = "evas-x11 ecore-x11 edje eet embryo"
-LICENSE = "MIT"
-PR = "r4"
-
-inherit e update-alternatives
-
-SRC_URI = "${E_URI}/enlightenment-${PV}.tar.gz \
- file://fix-configure.patch;patch=1 \
- file://set-autoscroll-defaults.patch;patch=1 \
- file://Xsession.d/98enlightenment"
-
-S = "${WORKDIR}/enlightenment-${PV}"
-
-PROFILE = "LOWRES_PDA"
-PROFILE_c7x0 = "HIRES_PDA"
-PROFILE_tosa = "HIRES_PDA"
-PROFILE_spitz = "HIRES_PDA"
-PROFILE_akita = "HIRES_PDA"
-
-EXTRA_OECONF = "--with-profile=${PROFILE} \
- --with-edje-cc=${STAGING_BINDIR_NATIVE}/edje_cc \
- --x-includes=${STAGING_INCDIR}/X11 \
- --x-libraries=${STAGING_LIBDIR}"
-
-FILES_${PN} = "${bindir}/* ${libdir}/* ${datadir} ${sysconfdir}"
-
-do_compile_prepend() {
- find ${S} -name Makefile | xargs sed -i 's:/usr/include:${STAGING_INCDIR}:'
- find ${S} -name Makefile | xargs sed -i 's:/usr/X11R6/include:${STAGING_INCDIR}:'
-}
-
-do_install_append() {
- install -d ${D}/${sysconfdir}/X11/Xsession.d
- install -m 755 ${WORKDIR}/Xsession.d/98enlightenment ${D}/${sysconfdir}/X11/Xsession.d
-}
-
-ALTERNATIVE_PATH = "${bindir}/enlightenment"
-ALTERNATIVE_NAME = "x-window-manager"
-ALTERNATIVE_LINK = "${bindir}/x-window-manager"
-ALTERNATIVE_PRIORITY = "16"
--- /dev/null
+DESCRIPTION = "E17 - the Enlightenment Window Mananger"
+DEPENDS = "evas-x11 ecore-x11 edje eet embryo"
+LICENSE = "MIT"
+PR = "r4"
+
+inherit e update-alternatives
+
+SRC_URI = "${E_URI}/enlightenment-${PV}.tar.gz \
+ file://fix-configure.patch;patch=1 \
+ file://set-autoscroll-defaults.patch;patch=1 \
+ file://Xsession.d/98enlightenment"
+
+S = "${WORKDIR}/enlightenment-${PV}"
+
+PROFILE = "LOWRES_PDA"
+PROFILE_c7x0 = "HIRES_PDA"
+PROFILE_tosa = "HIRES_PDA"
+PROFILE_spitz = "HIRES_PDA"
+PROFILE_akita = "HIRES_PDA"
+
+EXTRA_OECONF = "--with-profile=${PROFILE} \
+ --with-edje-cc=${STAGING_BINDIR_NATIVE}/edje_cc \
+ --x-includes=${STAGING_INCDIR}/X11 \
+ --x-libraries=${STAGING_LIBDIR}"
+
+FILES_${PN} = "${bindir}/* ${libdir}/* ${datadir} ${sysconfdir}"
+
+do_compile_prepend() {
+ find ${S} -name Makefile | xargs sed -i 's:/usr/include:${STAGING_INCDIR}:'
+ find ${S} -name Makefile | xargs sed -i 's:/usr/X11R6/include:${STAGING_INCDIR}:'
+}
+
+do_install_append() {
+ install -d ${D}/${sysconfdir}/X11/Xsession.d
+ install -m 755 ${WORKDIR}/Xsession.d/98enlightenment ${D}/${sysconfdir}/X11/Xsession.d
+}
+
+ALTERNATIVE_PATH = "${bindir}/enlightenment"
+ALTERNATIVE_NAME = "x-window-manager"
+ALTERNATIVE_LINK = "${bindir}/x-window-manager"
+ALTERNATIVE_PRIORITY = "16"
#!/bin/sh
-enlightenment
-
+enlightenment_start
DESCRIPTION = "Entrance is the Enlightenment login manager"
LICENSE = "MIT"
# can also use pam and crypt
-DEPENDS = "edb edb-native evas-x11 ecore-x11 edje esmart-x11 bash keylaunch xserver-common login-manager"
+DEPENDS = "evas-x11 ecore-x11 edje esmart-x11 bash keylaunch xserver-common login-manager"
RDEPENDS += "bash keylaunch xserver-common glibc-gconv-iso8859-1 login-manager entrance-themes"
HOMEPAGE = "http://www.enlightenment.org"
-PR = "r13"
+PR = "r14"
inherit e
+++ /dev/null
-require ecore.inc
-PR = "r2"
-
-EXTRA_OECONF = "--enable-ecore-fb \
- --enable-ecore-job \
- --enable-ecore-file \
- --enable-poll \
- --enable-ecore-dbus \
- --enable-ecore-evas \
- --enable-ecore-evas-buffer \
- --enable-ecore-evas-fb \
- --disable-ecore-evas-x \
- --disable-ecore-evas-xrender \
- --disable-ecore-evas-gl \
- --enable-ecore-con \
- --enable-ecore-config \
- --enable-ecore-ipc \
- --enable-ecore-txt \
- --disable-ecore-x \
- --disable-curl \
- --without-curl-config \
- --enable-ecore-config \
- --enable-ecore-desktop \
- --disable-openssl"
-
-parts = "Ecore Ecore_Job Ecore_File Ecore_DBus \
- Ecore_Txt Ecore_Fb Ecore_Con \
- Ecore_Ipc Ecore_Evas Ecore_Config \
- Ecore_Desktop"
--- /dev/null
+require ecore.inc
+PR = "r2"
+
+SRC_URI += "file://remove-bad-code.patch;patch=1"
+
+EXTRA_OECONF = "--enable-ecore-fb \
+ --enable-ecore-job \
+ --enable-ecore-file \
+ --enable-poll \
+ --enable-ecore-dbus \
+ --enable-ecore-evas \
+ --enable-ecore-evas-buffer \
+ --enable-ecore-evas-fb \
+ --disable-ecore-evas-x \
+ --disable-ecore-evas-xrender \
+ --disable-ecore-evas-gl \
+ --enable-ecore-con \
+ --enable-ecore-config \
+ --enable-ecore-ipc \
+ --enable-ecore-txt \
+ --disable-ecore-x \
+ --disable-curl \
+ --without-curl-config \
+ --enable-ecore-config \
+ --enable-ecore-desktop \
+ --disable-openssl"
+
+parts = "Ecore Ecore_Job Ecore_File Ecore_DBus \
+ Ecore_Txt Ecore_Fb Ecore_Con \
+ Ecore_Ipc Ecore_Evas Ecore_Config \
+ Ecore_Desktop"
+++ /dev/null
-require ecore-fb_${PV}.bb
-inherit native
-# disable curl for now (see EXTRA_OECONF in ecore-fb), we may reenable it when we need it
-# DEPENDS = "curl-native eet-native evas-native"
-DEPENDS = "eet-native evas-native"
-PROVIDES = "ecore-native"
\ No newline at end of file
--- /dev/null
+require ecore-fb_${PV}.bb
+inherit native
+# disable curl for now (see EXTRA_OECONF in ecore-fb), we may reenable it when we need it
+# DEPENDS = "curl-native eet-native evas-native"
+DEPENDS = "eet-native evas-native"
+PROVIDES = "ecore-native"
\ No newline at end of file
+++ /dev/null
-require ecore.inc
-DEPENDS += "evas-x11"
-PR = "r3"
-
-SRC_URI += "file://configure-abstract-sockets.patch;patch=1"
-
-EXTRA_OECONF = "--disable-ecore-fb \
- --disable-ecore-dfb \
- --enable-ecore-job \
- --enable-ecore-file \
- --enable-ecore-dbus \
- --disable-ecore-evas-fb \
- --disable-ecore-evas-dfb \
- --enable-ecore-evas-x \
- --enable-ecore-evas-buffer \
- --disable-ecore-evas-gl \
- --enable-ecore-con \
- --enable-ecore-ipc \
- --enable-ecore-txt \
- --enable-ecore-x \
- --enable-ecore-config \
- --disable-openssl \
- --enable-ecore-desktop \
- --x-includes=${STAGING_INCDIR}/X11 \
- --x-libraries=${STAGING_LIBDIR} "
-
-parts = "Ecore Ecore_Job Ecore_File Ecore_DBus \
- Ecore_Txt Ecore_Fb Ecore_Con \
- Ecore_Ipc Ecore_Evas Ecore_Config \
- Ecore_X Ecore_Desktop"
--- /dev/null
+require ecore.inc
+DEPENDS += "evas-x11"
+PR = "r3"
+
+SRC_URI += "file://configure-abstract-sockets.patch;patch=1"
+
+EXTRA_OECONF = "--disable-ecore-fb \
+ --disable-ecore-dfb \
+ --enable-ecore-job \
+ --enable-ecore-file \
+ --enable-ecore-dbus \
+ --disable-ecore-evas-fb \
+ --disable-ecore-evas-dfb \
+ --enable-ecore-evas-x \
+ --enable-ecore-evas-buffer \
+ --disable-ecore-evas-gl \
+ --enable-ecore-con \
+ --enable-ecore-ipc \
+ --enable-ecore-txt \
+ --enable-ecore-x \
+ --enable-ecore-config \
+ --disable-openssl \
+ --enable-ecore-desktop \
+ --x-includes=${STAGING_INCDIR}/X11 \
+ --x-libraries=${STAGING_LIBDIR} "
+
+parts = "Ecore Ecore_Job Ecore_File Ecore_DBus \
+ Ecore_Txt Ecore_Fb Ecore_Con \
+ Ecore_Ipc Ecore_Evas Ecore_Config \
+ Ecore_X Ecore_Desktop"
timeouts and idle handlers fast, optimized, and convenient."
LEAD_SONAME = "libecore.so"
LICENSE = "MIT"
-# can also have openssl, dbus
+# can also have openssl, dbus, iconv
DEPENDS += "virtual/evas curl eet"
PROVIDES += "virtual/ecore"
-diff -Nur ecore-0.9.9.015~/configure.in ecore-0.9.9.015/configure.in
---- ecore-0.9.9.015~/configure.in 2005-09-27 17:22:38.000000000 -0700
-+++ ecore-0.9.9.015/configure.in 2005-09-27 17:23:40.000000000 -0700
-@@ -103,7 +102,7 @@
- tslib_libs=""
- AC_CHECK_HEADER(tslib.h,
- [
-- tslib_libs="-ltslib"
-+ tslib_libs="-lts"
- AC_DEFINE(HAVE_TSLIB, 1, [Build Ecore_X Module])
- ],[
- AC_MSG_RESULT("No tslib header found. No tslib support being built")
+diff -Nur ecore-0.9.9.037~/configure.in ecore-0.9.9.037/configure.in
+--- ecore-0.9.9.037~/configure.in 2007-01-14 20:21:42.000000000 -0800
++++ ecore-0.9.9.037/configure.in 2007-01-14 20:22:18.000000000 -0800
+@@ -578,7 +578,7 @@
+ if test "x$want_ecore_fb" = "xyes"; then
+ AC_CHECK_HEADER(tslib.h,
+ [
+- tslib_libs="-ltslib"
++ tslib_libs="-lts"
+ AC_DEFINE(HAVE_TSLIB, 1, [Build Ecore_FB Touchscreen Code])
+ ]
+ )
--- /dev/null
+diff -Nur edb-1.0.5.007~/configure.in edb-1.0.5.007/configure.in
+--- edb-1.0.5.007~/configure.in 2007-01-15 01:01:31.000000000 -0800
++++ edb-1.0.5.007/configure.in 2007-01-15 01:01:40.000000000 -0800
+@@ -404,7 +404,7 @@
+ ncurses_ok=no
+ gtk_ok=no
+
+-GTK_CONFIG=`which gtk-config`
++GTK_CONFIG=
+ if test -x "$GTK_CONFIG"; then
+ AC_CHECK_LIB(gtk, gtk_init, gtk_ok=yes, gtk_ok=no, `$GTK_CONFIG --libs`)
+ fi
inherit native
DEPENDS = "zlib-native"
+SRC_URI += "file://no-gtk-forkbomb.patch;patch=1"
+
EXTRA_OECONF += "--disable-gtk --disable-ncurses"
do_stage_append () {
DESCRIPTION = "EDB is a database convenience library wrapped around the \
Berkeley DB 2.7.7 by Sleepycat Software."
DEPENDS = "zlib ncurses"
+# can depend on gtk and tcl/tk
LICENSE = "BSD"
PR = "r4"
+++ /dev/null
-require edje_${PV}.bb
-PR = "r3"
-
-inherit native
-
-DEPENDS = "evas-native ecore-native eet-native embryo-native"
-FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/edje"
-
-do_configure_prepend() {
- sed -i 's:EMBRYO_PREFIX"/bin:"${STAGING_BINDIR}:' ${S}/src/bin/edje_cc_out.c
- sed -i 's:cpp -I:/usr/bin/cpp -I:' ${S}/src/bin/edje_cc_parse.c
- sed -i 's:gcc -I:/usr/bin/gcc -I:' ${S}/src/bin/edje_cc_parse.c
-}
-
-do_stage_append() {
- edje_data_dir=`${STAGING_BINDIR}/edje-config-native --datadir`
- # could also use ${STAGING_DATADIR}/edje/include
- install -d $edje_data_dir/include
- install -m 0644 data/include/edje.inc $edje_data_dir/include
-}
--- /dev/null
+require edje_${PV}.bb
+PR = "r3"
+
+inherit native
+
+DEPENDS = "evas-native ecore-native eet-native embryo-native"
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/edje"
+
+do_configure_prepend() {
+ sed -i 's:EMBRYO_PREFIX"/bin:"${STAGING_BINDIR}:' ${S}/src/bin/edje_cc_out.c
+ sed -i 's:cpp -I:/usr/bin/cpp -I:' ${S}/src/bin/edje_cc_parse.c
+ sed -i 's:gcc -I:/usr/bin/gcc -I:' ${S}/src/bin/edje_cc_parse.c
+}
+
+do_stage_append() {
+ edje_data_dir=`${STAGING_BINDIR}/edje-config-native --datadir`
+ # could also use ${STAGING_DATADIR}/edje/include
+ install -d $edje_data_dir/include
+ install -m 0644 data/include/edje.inc $edje_data_dir/include
+}
+++ /dev/null
-DESCRIPTION = "Edje is a complex graphical design & layout library."
-DEPENDS = "edje embryo-utils gcc"
-LICENSE = "MIT"
-PR = "r6"
-
-inherit efl
-
-PACKAGES = "edje-utils"
-FILES_${PN} = "${bindir}/edje ${bindir}/edje_* ${datadir}/edje/data/template ${datadir}/edje/include"
-RDEPENDS_${PN} += "embryo-utils cpp cpp-symlinks gcc gcc-symlinks"
-
-SRC_URI = "${E_URI}/edje-${PV}.tar.gz \
- ${E_CVS};module=e17/libs/edje/m4;date=20060101"
-S = "${WORKDIR}/edje-${PV}"
-
-libraries = ""
-headers = ""
-
-do_configure_prepend() {
- install -d "${S}/m4"
- install "${WORKDIR}/m4/"*.m4 "${S}/m4"
- aclocal -I m4
-}
--- /dev/null
+DESCRIPTION = "Edje is a complex graphical design & layout library."
+DEPENDS = "edje embryo-utils gcc"
+LICENSE = "MIT"
+PR = "r6"
+
+inherit efl
+
+PACKAGES = "edje-utils"
+FILES_${PN} = "${bindir}/edje ${bindir}/edje_* ${datadir}/edje/data/template ${datadir}/edje/include"
+RDEPENDS_${PN} += "embryo-utils cpp cpp-symlinks gcc gcc-symlinks"
+
+SRC_URI = "${E_URI}/edje-${PV}.tar.gz \
+ ${E_CVS};module=e17/libs/edje/m4;date=20060101"
+S = "${WORKDIR}/edje-${PV}"
+
+libraries = ""
+headers = ""
+
+do_configure_prepend() {
+ install -d "${S}/m4"
+ install "${WORKDIR}/m4/"*.m4 "${S}/m4"
+ aclocal -I m4
+}
+++ /dev/null
-DESCRIPTION = "Edje is a complex graphical design & layout library."
-# can also install vim data files
-DEPENDS = "virtual/evas virtual/ecore eet embryo edje-native"
-LICENSE = "MIT"
-PR = "r7"
-
-## package.bbclass kills packages when there are duplicates, this means
-## that efl.bbclass can't have PACKAGES += and so the FILES for previous
-## packages take precedence over -utils
-#PACKAGES = "edje-utils"
-#RPROVIDES_edje-utils += "libedje-utils"
-#FILES_edje-utils = "${bindir}/edje ${bindir}/edje_* ${datadir}/edje/data/template ${datadir}/edje/include"
-#RDEPENDS_edje-utils += "libembryo-utils cpp cpp-symlinks gcc gcc-symlinks"
-
-inherit efl
-
-SRC_URI += "${E_CVS};module=e17/libs/edje/m4;date=20060101"
-
-do_configure_prepend() {
- install -d "${S}/m4"
- install "${WORKDIR}/m4/"*.m4 "${S}/m4"
- aclocal -I m4
-}
-
-LEAD_SONAME = "libedje.so"
-
-FILES_${PN}-examples = "${datadir}/edje/data/images \
- ${datadir}/edje/data/src \
- ${datadir}/edje/data/test \
- ${datadir}/edje/data/*.sh"
-
-FILES_${SRCNAME}-themes = ""
--- /dev/null
+DESCRIPTION = "Edje is a complex graphical design & layout library."
+# can also install vim data files
+DEPENDS = "virtual/evas virtual/ecore eet embryo edje-native"
+LICENSE = "MIT"
+PR = "r7"
+
+## package.bbclass kills packages when there are duplicates, this means
+## that efl.bbclass can't have PACKAGES += and so the FILES for previous
+## packages take precedence over -utils
+#PACKAGES = "edje-utils"
+#RPROVIDES_edje-utils += "libedje-utils"
+#FILES_edje-utils = "${bindir}/edje ${bindir}/edje_* ${datadir}/edje/data/template ${datadir}/edje/include"
+#RDEPENDS_edje-utils += "libembryo-utils cpp cpp-symlinks gcc gcc-symlinks"
+
+inherit efl
+
+SRC_URI += "${E_CVS};module=e17/libs/edje/m4;date=20060101"
+
+do_configure_prepend() {
+ install -d "${S}/m4"
+ install "${WORKDIR}/m4/"*.m4 "${S}/m4"
+ aclocal -I m4
+}
+
+LEAD_SONAME = "libedje.so"
+
+FILES_${PN}-examples = "${datadir}/edje/data/images \
+ ${datadir}/edje/data/src \
+ ${datadir}/edje/data/test \
+ ${datadir}/edje/data/*.sh"
+
+FILES_${SRCNAME}-themes = ""
+++ /dev/null
-require eet_${PV}.bb
-inherit native
-DEPENDS = "zlib-native jpeg-native"
-
--- /dev/null
+require eet_${PV}.bb
+inherit native
+DEPENDS = "zlib-native jpeg-native"
+
+++ /dev/null
-DESCRIPTION = "EET is a tiny library designed to write an \
-arbitary set of chunks of data to a file and optionally compress \
-each chunk (very much like a zip file) and allow fast \
-random-access reading of the file later on."
-DEPENDS = "zlib jpeg"
-LICENSE = "BSD"
-PR = "r2"
-
-inherit efl
--- /dev/null
+DESCRIPTION = "EET is a tiny library designed to write an \
+arbitary set of chunks of data to a file and optionally compress \
+each chunk (very much like a zip file) and allow fast \
+random-access reading of the file later on."
+DEPENDS = "zlib jpeg"
+LICENSE = "BSD"
+PR = "r2"
+
+inherit efl
+++ /dev/null
-require embryo_${PV}.bb
-inherit native
-
-do_stage_append() {
- install -d ${STAGING_DATADIR}/embryo/include
- install -m 0644 include/default.inc ${STAGING_DATADIR}/embryo/include
-}
\ No newline at end of file
--- /dev/null
+require embryo_${PV}.bb
+inherit native
+
+do_stage_append() {
+ install -d ${STAGING_DATADIR}/embryo/include
+ install -m 0644 include/default.inc ${STAGING_DATADIR}/embryo/include
+}
\ No newline at end of file
+++ /dev/null
-DESCRIPTION = "Embryo implements a C like scripting language used in various parts \
-of the Enlightenment project, namely Edje. Embryo's scripting language is based on \
-CompuPhase's Small language that was introduced in Dr Dobb's Journal in 1999. \
-Embryo allows scripting capabilities in places that otherwise wouldn't support \
-basic programming structures such as in Edje EDCs."
-LICENSE = "MIT"
-PR = "r4"
-
-inherit efl
-
-SRC_URI = "${E_URI}/embryo-${PV}.tar.gz"
-S = "${WORKDIR}/embryo-${PV}"
-
-PACKAGES = "embryo-utils"
-FILES_${PN} = "${bindir}/embryo ${bindir}/embryo_* ${datadir}/embryo/include"
-
-libraries = ""
-headers = ""
--- /dev/null
+DESCRIPTION = "Embryo implements a C like scripting language used in various parts \
+of the Enlightenment project, namely Edje. Embryo's scripting language is based on \
+CompuPhase's Small language that was introduced in Dr Dobb's Journal in 1999. \
+Embryo allows scripting capabilities in places that otherwise wouldn't support \
+basic programming structures such as in Edje EDCs."
+LICENSE = "MIT"
+PR = "r4"
+
+inherit efl
+
+SRC_URI = "${E_URI}/embryo-${PV}.tar.gz"
+S = "${WORKDIR}/embryo-${PV}"
+
+PACKAGES = "embryo-utils"
+FILES_${PN} = "${bindir}/embryo ${bindir}/embryo_* ${datadir}/embryo/include"
+
+libraries = ""
+headers = ""
+++ /dev/null
-DESCRIPTION = "Embryo implements a C like scripting language used in various parts \
-of the Enlightenment project, namely Edje. Embryo's scripting language is based on \
-CompuPhase's Small language that was introduced in Dr Dobb's Journal in 1999. \
-Embryo allows scripting capabilities in places that otherwise wouldn't support \
-basic programming structures such as in Edje EDCs."
-LICENSE = "MIT"
-PR = "r4"
-
-inherit efl
-
-FILES_${PN}-examples = "${datadir}/${PN}/examples"
\ No newline at end of file
--- /dev/null
+DESCRIPTION = "Embryo implements a C like scripting language used in various parts \
+of the Enlightenment project, namely Edje. Embryo's scripting language is based on \
+CompuPhase's Small language that was introduced in Dr Dobb's Journal in 1999. \
+Embryo allows scripting capabilities in places that otherwise wouldn't support \
+basic programming structures such as in Edje EDCs."
+LICENSE = "MIT"
+PR = "r4"
+
+inherit efl
+
+FILES_${PN}-examples = "${datadir}/${PN}/examples"
\ No newline at end of file
+++ /dev/null
-require evas.inc
-PR = "r5"
-
-EXTRA_OECONF = "--enable-fb \
- --disable-directfb \
- --enable-buffer \
- --disable-software-qtopia \
- --disable-software-x11 \
- --disable-gl-x11 \
- --disable-xrender-x11 \
- --enable-image-loader-eet \
- --disable-image-loader-edb \
- --enable-image-loader-png \
- --enable-image-loader-jpeg \
- --enable-small-dither-mask \
- --enable-cpu-c \
- --enable-font-loader-eet \
- --enable-scale-sample \
- --enable-scale-smooth \
- --enable-convert-yuv \
- --enable-convert-8-rgb-332 \
- --enable-convert-8-rgb-666 \
- --enable-convert-8-rgb-232 \
- --enable-convert-8-rgb-222 \
- --enable-convert-8-rgb-221 \
- --enable-convert-8-rgb-121 \
- --enable-convert-8-rgb-111 \
- --enable-convert-16-rgb-565 \
- --enable-convert-16-rgb-555 \
- --enable-convert-16-rgb-444 \
- --enable-convert-16-rgb-ipq \
- --enable-convert-16-rgb-rot-0 \
- --enable-convert-16-rgb-rot-90 \
- --enable-convert-16-rgb-rot-270 \
- --enable-convert-24-rgb-888 \
- --enable-convert-24-bgr-888 \
- --enable-convert-32-rgb-8888 \
- --enable-convert-32-rgbx-8888 \
- --enable-convert-32-bgr-8888 \
- --enable-convert-32-bgrx-8888 \
- --enable-convert-32-rgb-rot-0 \
- --enable-convert-32-rgb-rot-90 \
- --enable-convert-32-rgb-rot-270"
-
-headers = "../modules/engines/buffer/Evas_Engine_Buffer.h \
- ../modules/engines/fb/Evas_Engine_FB.h \
- Evas.h"
--- /dev/null
+require evas.inc
+PR = "r5"
+
+EXTRA_OECONF = "--enable-fb \
+ --disable-directfb \
+ --enable-buffer \
+ --disable-software-qtopia \
+ --disable-software-x11 \
+ --disable-gl-x11 \
+ --disable-xrender-x11 \
+ --enable-image-loader-eet \
+ --disable-image-loader-edb \
+ --enable-image-loader-png \
+ --enable-image-loader-jpeg \
+ --enable-small-dither-mask \
+ --enable-cpu-c \
+ --enable-font-loader-eet \
+ --enable-scale-sample \
+ --enable-scale-smooth \
+ --enable-convert-yuv \
+ --enable-convert-8-rgb-332 \
+ --enable-convert-8-rgb-666 \
+ --enable-convert-8-rgb-232 \
+ --enable-convert-8-rgb-222 \
+ --enable-convert-8-rgb-221 \
+ --enable-convert-8-rgb-121 \
+ --enable-convert-8-rgb-111 \
+ --enable-convert-16-rgb-565 \
+ --enable-convert-16-rgb-555 \
+ --enable-convert-16-rgb-444 \
+ --enable-convert-16-rgb-ipq \
+ --enable-convert-16-rgb-rot-0 \
+ --enable-convert-16-rgb-rot-90 \
+ --enable-convert-16-rgb-rot-270 \
+ --enable-convert-24-rgb-888 \
+ --enable-convert-24-bgr-888 \
+ --enable-convert-32-rgb-8888 \
+ --enable-convert-32-rgbx-8888 \
+ --enable-convert-32-bgr-8888 \
+ --enable-convert-32-bgrx-8888 \
+ --enable-convert-32-rgb-rot-0 \
+ --enable-convert-32-rgb-rot-90 \
+ --enable-convert-32-rgb-rot-270"
+
+headers = "../modules/engines/buffer/Evas_Engine_Buffer.h \
+ ../modules/engines/fb/Evas_Engine_FB.h \
+ Evas.h"
+++ /dev/null
-require evas-fb_${PV}.bb
-inherit native
-DEPENDS = "freetype-native libpng-native jpeg-native eet-native"
-PROVIDES = "evas-native"
-
--- /dev/null
+require evas-fb_${PV}.bb
+inherit native
+DEPENDS = "freetype-native libpng-native jpeg-native eet-native"
+PROVIDES = "evas-native"
+
+++ /dev/null
-require evas.inc
-DEPENDS += "edb virtual/libx11 libxext freetype"
-PR = "r7"
-
-EXTRA_OECONF = "--x-includes=${STAGING_INCDIR}/X11 \
- --x-libraries=${STAGING_LIBDIR} \
- --enable-fb \
- --disable-directfb \
- --enable-buffer \
- --disable-software-qtopia \
- --enable-software-x11 \
- --disable-gl-x11 \
- --enable-image-loader-eet \
- --enable-image-loader-edb \
- --enable-image-loader-png \
- --enable-image-loader-jpeg \
- --enable-small-dither-mask \
- --enable-cpu-c \
- --enable-font-loader-eet \
- --enable-scale-sample \
- --enable-scale-smooth \
- --enable-convert-yuv \
- --disable-image-loader-svg \
- --disable-convert-8-rgb-332 \
- --disable-convert-8-rgb-666 \
- --disable-convert-8-rgb-232 \
- --disable-convert-8-rgb-222 \
- --disable-convert-8-rgb-221 \
- --disable-convert-8-rgb-121 \
- --disable-convert-8-rgb-111 \
- --enable-convert-16-rgb-565 \
- --disable-convert-16-rgb-555 \
- --disable-convert-16-rgb-444 \
- --disable-convert-16-rgb-ipq \
- --enable-convert-16-rgb-rot-0 \
- --disable-convert-16-rgb-rot-90 \
- --enable-convert-16-rgb-rot-270 \
- --disable-convert-24-rgb-888 \
- --disable-convert-24-bgr-888 \
- --disable-convert-32-rgb-8888 \
- --disable-convert-32-rgbx-8888 \
- --disable-convert-32-bgr-8888 \
- --disable-convert-32-bgrx-8888 \
- --disable-convert-32-rgb-rot-0 \
- --disable-convert-32-rgb-rot-90 \
- --disable-convert-32-rgb-rot-270"
-
-headers = "../modules/engines/software_x11/Evas_Engine_Software_X11.h \
- ../modules/engines/xrender_x11/Evas_Engine_XRender_X11.h \
- ../modules/engines/buffer/Evas_Engine_Buffer.h \
- ../modules/engines/fb/Evas_Engine_FB.h \
- Evas.h"
-
--- /dev/null
+require evas.inc
+DEPENDS += "edb virtual/libx11 libxext freetype"
+PR = "r7"
+
+EXTRA_OECONF = "--x-includes=${STAGING_INCDIR}/X11 \
+ --x-libraries=${STAGING_LIBDIR} \
+ --enable-fb \
+ --disable-directfb \
+ --enable-buffer \
+ --disable-software-qtopia \
+ --enable-software-x11 \
+ --disable-gl-x11 \
+ --enable-image-loader-eet \
+ --enable-image-loader-edb \
+ --enable-image-loader-png \
+ --enable-image-loader-jpeg \
+ --enable-small-dither-mask \
+ --enable-cpu-c \
+ --enable-font-loader-eet \
+ --enable-scale-sample \
+ --enable-scale-smooth \
+ --enable-convert-yuv \
+ --disable-image-loader-svg \
+ --disable-convert-8-rgb-332 \
+ --disable-convert-8-rgb-666 \
+ --disable-convert-8-rgb-232 \
+ --disable-convert-8-rgb-222 \
+ --disable-convert-8-rgb-221 \
+ --disable-convert-8-rgb-121 \
+ --disable-convert-8-rgb-111 \
+ --enable-convert-16-rgb-565 \
+ --disable-convert-16-rgb-555 \
+ --disable-convert-16-rgb-444 \
+ --disable-convert-16-rgb-ipq \
+ --enable-convert-16-rgb-rot-0 \
+ --disable-convert-16-rgb-rot-90 \
+ --enable-convert-16-rgb-rot-270 \
+ --disable-convert-24-rgb-888 \
+ --disable-convert-24-bgr-888 \
+ --disable-convert-32-rgb-8888 \
+ --disable-convert-32-rgbx-8888 \
+ --disable-convert-32-bgr-8888 \
+ --disable-convert-32-bgrx-8888 \
+ --disable-convert-32-rgb-rot-0 \
+ --disable-convert-32-rgb-rot-90 \
+ --disable-convert-32-rgb-rot-270"
+
+headers = "../modules/engines/software_x11/Evas_Engine_Software_X11.h \
+ ../modules/engines/xrender_x11/Evas_Engine_XRender_X11.h \
+ ../modules/engines/buffer/Evas_Engine_Buffer.h \
+ ../modules/engines/fb/Evas_Engine_FB.h \
+ Evas.h"
+
---- evas-0.9.9.023/configure.in~ 2006-01-11 21:34:57.000000000 -0800
-+++ evas-0.9.9.023/configure.in 2006-02-03 12:15:45.000000000 -0800
-@@ -152,9 +152,7 @@
+diff -Nur evas-0.9.9.037~/configure.in evas-0.9.9.037/configure.in
+--- evas-0.9.9.037~/configure.in 2007-01-14 20:09:57.000000000 -0800
++++ evas-0.9.9.037/configure.in 2007-01-14 20:11:09.000000000 -0800
+@@ -161,9 +161,7 @@
+ AC_CHECK_HEADER(X11/X.h,
[
- AM_CONDITIONAL(BUILD_ENGINE_SOFTWARE_X11, true)
AC_DEFINE(BUILD_ENGINE_SOFTWARE_X11, 1, [Software X11 Rendering Backend])
- x_dir=${x_dir:-/usr/X11R6}
- x_cflags=${x_cflags:--I${x_includes:-$x_dir/include}}
- x_libs="${x_libs:--L${x_libraries:-$x_dir/lib}} -lX11 -lXext"
+ x_libs="-lX11 -lXext"
- ENGINE_SOFTWARE_X11_PRG="evas_software_x11_test evas_software_x11_perf_test evas_software_x11_perf_load"
],
[
-@@ -423,10 +421,10 @@
+ AC_MSG_RESULT(disabling software X11 engine)
+@@ -407,10 +405,10 @@
AC_DEFINE(BUILD_ENGINE_GL_X11, 1, [OpenGL X11 Rendering Backend])
AM_CONDITIONAL(BUILD_ENGINE_GL_COMMON, true)
AC_DEFINE(BUILD_ENGINE_GL_COMMON, 1, [Generic OpenGL Rendering Support])
+ gl_cflags=""
gl_libs="-lGL -lGLU -lpthread"
gl_dir=""
- ENGINE_GL_X11_PRG="evas_gl_x11_test"
-@@ -489,7 +487,7 @@
+ ], [
+@@ -471,7 +469,7 @@
AC_DEFINE(BUILD_ENGINE_CAIRO_X11, 1, [Cairo X11 Rendering Backend])
AM_CONDITIONAL(BUILD_ENGINE_CAIRO_COMMON, true)
AC_DEFINE(BUILD_ENGINE_CAIRO_COMMON, 1, [Generic Cairo Rendering Support])
+ x_dir="";
x_cflags="-I"$x_dir"/include"
x_libs="-L"$x_dir"/lib -lX11 -lXext"
- ENGINE_CAIRO_X11_PRG="evas_cairo_x11_test"
+ ], [
--- /dev/null
+Index: gizmod-2.3/configure.ac
+===================================================================
+--- gizmod-2.3.orig/configure.ac
++++ gizmod-2.3/configure.ac
+@@ -319,76 +319,6 @@ fi
+
+ ###########################################################################
+ ##
+-## Check whether to build BMP plugin
+-##
+-
+-##################
+-## enabled?
+-########
+-
+-AC_MSG_CHECKING(Whether or not to build BMP plugin)
+-AC_ARG_ENABLE(bmp,
+- [ --enable-bmp build BMP plugin <default = no>],
+- [enable_bmp="$enableval"], enable_bmp=no)
+-AC_MSG_RESULT($enable_bmp)
+-
+-AM_CONDITIONAL(BUILD_EXTERNALPLUGIN_BMP, test x$enable_bmp = xyes)
+-AM_CONDITIONAL(BUILD_PLUGIN_BMPCONTROL, test x$enable_bmp = xyes)
+-
+-##################
+-## can we build it if it's enabled?
+-########
+-
+-if test "$enable_bmp" == "yes"; then
+-
+-BEEP_CFLAGS=""
+-BEEP_LIBS=""
+-
+-#check stuff
+-AM_PATH_GLIB_2_0(2.4.0, ,
+- AC_MSG_ERROR([GTK+ >= 2.4.0 not installed - required for BMP plugin]))
+-AM_PATH_GTK_2_0(2.4.0, ,
+- AC_MSG_ERROR([GTK+ >= 2.4.0 not installed - required for BMP plugin]))
+-
+-dnl check for beep
+-PKG_CHECK_MODULES(BEEP, [ bmp >= 0.9.7], ,
+- AC_MSG_ERROR("You need the BEEP development files to build the BEEP plugin!"))
+-
+-BEEP_PLUGIN_DIR="`$PKG_CONFIG --variable=output_plugin_dir bmp`"
+-BEEP_INPUT_PLUGIN_DIR="`$PKG_CONFIG --variable=input_plugin_dir bmp`"
+-BEEP_OUTPUT_PLUGIN_DIR="`$PKG_CONFIG --variable=output_plugin_dir bmp`"
+-BEEP_GENERAL_PLUGIN_DIR="`$PKG_CONFIG --variable=general_plugin_dir bmp`"
+-BEEP_VISUALIZATION_PLUGIN_DIR="`$PKG_CONFIG --variable=visualization_plugin_dir bmp`"
+-BEEP_EFFECT_PLUGIN_DIR="`$PKG_CONFIG --variable=effect_plugin_dir bmp`"
+-BEEP_DATA_DIR="`$PKG_CONFIG --variable=data_dir bmp`"
+-
+-AC_SUBST(BEEP_PLUGIN_DIR)
+-AC_SUBST(BEEP_INPUT_PLUGIN_DIR)
+-AC_SUBST(BEEP_OUTPUT_PLUGIN_DIR)
+-AC_SUBST(BEEP_GENERAL_PLUGIN_DIR)
+-AC_SUBST(BEEP_VISUALIZATION_PLUGIN_DIR)
+-AC_SUBST(BEEP_EFFECT_PLUGIN_DIR)
+-AC_SUBST(BEEP_DATA_DIR)
+-
+-dnl make BEEP_DATA_DIR a variable in config.h
+-AH_TEMPLATE(BEEP_DATA_DIR, "Path to bmp-touch.config")
+-AC_DEFINE_UNQUOTED(BEEP_DATA_DIR, "$BEEP_DATA_DIR")
+-
+-CPPFLAGS="$CPPFLAGS $BEEP_CFLAGS"
+-
+-AC_CHECK_HEADER(bmp/beepctrl.h, [
+- AC_DEFINE(HAVE_BEEPCTRL_H, 1, [Has bmp/beepctrl.h])
+- ], [
+- AC_MSG_ERROR([Cannot find beepctrl.h!])
+- ])
+-
+-AC_SUBST(BEEP_CFLAGS)
+-AC_SUBST(BEEP_LIBS)
+-
+-fi
+-
+-###########################################################################
+-##
+ ## Check whether to build Sound Visualization plugin
+ ##
+
+@@ -633,9 +563,7 @@ AC_CONFIG_FILES([
+ plugins/soundVisualization/Makefile
+ plugins/cpuUsage/Makefile
+ plugins/x11/Makefile
+- plugins/bmpControl/Makefile
+ plugins/externalPlugins/Makefile
+- plugins/externalPlugins/bmp/Makefile
+ plugins/lirc/Makefile
+ ])
+ AC_OUTPUT
+Index: gizmod-2.3/plugins/Makefile.am
+===================================================================
+--- gizmod-2.3.orig/plugins/Makefile.am
++++ gizmod-2.3/plugins/Makefile.am
+@@ -1 +1 @@
+-SUBDIRS=scriptingPlugins powermate alsaMixer xosd generic externalPlugins soundVisualization cpuUsage x11 bmpControl lirc
++SUBDIRS=scriptingPlugins powermate alsaMixer xosd generic externalPlugins soundVisualization cpuUsage x11 lirc
+Index: gizmod-2.3/plugins/externalPlugins/Makefile.am
+===================================================================
+--- gizmod-2.3.orig/plugins/externalPlugins/Makefile.am
++++ gizmod-2.3/plugins/externalPlugins/Makefile.am
+@@ -1 +1 @@
+-SUBDIRS=bmp
++SUBDIRS=
--- /dev/null
+Index: gizmod-2.3/configure.ac
+===================================================================
+--- gizmod-2.3.orig/configure.ac
++++ gizmod-2.3/configure.ac
+@@ -393,60 +393,6 @@ fi
+
+ ###########################################################################
+ ##
+-## Check whether to build XMMS plugin
+-##
+-
+-##################
+-## enabled?
+-########
+-
+-AC_MSG_CHECKING(Whether or not to build XMMS plugin)
+-AC_ARG_ENABLE(xmms,
+- [ --enable-xmms build XMMS plugin <default = yes>],
+- [enable_xmms="$enableval"], enable_xmms=yes)
+-AC_MSG_RESULT($enable_xmms)
+-
+-AM_CONDITIONAL(BUILD_EXTERNALPLUGIN_XMMS, test x$enable_xmms = xyes)
+-AM_CONDITIONAL(BUILD_PLUGIN_XMMSCONTROL, test x$enable_xmms = xyes)
+-
+-##################
+-## can we build it if it's enabled?
+-########
+-
+-if test "$enable_xmms" == "yes"; then
+-
+-XMMS_CFLAGS=""
+-XMMS_LIBS=""
+-
+-#check stuff
+-
+-AM_PATH_XMMS(1.2.4,
+- XMMS_CFLAGS=`xmms-config --cflags`
+- CPPFLAGS="$CPPFLAGS $XMMS_CFLAGS"
+- XMMS_LIBS=`xmms-config --libs`
+- ,
+- AC_MSG_ERROR([You must have the XMMS development headers installed to build the XMMS plugin!])
+-)
+-
+-AC_CHECK_HEADER(xmms/xmmsctrl.h, [
+- AC_DEFINE(HAVE_XMMSCTRL_H, 1, [Has xmms/xmmsctrl.h])
+- ], [
+- AC_MSG_ERROR([Cannot find xmmsctrl.h!])
+- ])
+-
+-AC_CHECK_HEADER(xmms/plugin.h, [
+- AC_DEFINE(HAVE_XMMSPLUGIN_H, 1, [Has xmms/xmmsplugin.h])
+- ], [
+- AC_MSG_ERROR([Cannot find xmms/plugin.h!])
+- ])
+-
+-AC_SUBST(XMMS_CFLAGS)
+-AC_SUBST(XMMS_LIBS)
+-
+-fi
+-
+-###########################################################################
+-##
+ ## Check whether to build Sound Visualization plugin
+ ##
+
+@@ -691,10 +637,8 @@ AC_CONFIG_FILES([
+ plugins/soundVisualization/Makefile
+ plugins/cpuUsage/Makefile
+ plugins/x11/Makefile
+- plugins/xmmsControl/Makefile
+ plugins/bmpControl/Makefile
+ plugins/externalPlugins/Makefile
+- plugins/externalPlugins/xmms/Makefile
+ plugins/externalPlugins/bmp/Makefile
+ plugins/lirc/Makefile
+ ])
+@@ -774,22 +718,10 @@ else
+ echo " BMP Control plugin: Disabled"
+ fi
+
+-if test "$enable_xmms" == "yes"; then
+- echo " XMMS Control plugin: Enabled"
+-else
+- echo " XMMS Control plugin: Disabled"
+-fi
+-
+ if test "$enable_bmp" == "yes"; then
+ echo " BMP Visualization plugin: Enabled"
+ else
+ echo " BMP Visualization plugin: Disabled"
+ fi
+
+-if test "$enable_xmms" == "yes"; then
+- echo " XMMS Visualization plugin: Enabled"
+-else
+- echo " XMMS Visualization plugin: Disabled"
+-fi
+-
+ echo
+Index: gizmod-2.3/plugins/Makefile.am
+===================================================================
+--- gizmod-2.3.orig/plugins/Makefile.am
++++ gizmod-2.3/plugins/Makefile.am
+@@ -1 +1 @@
+-SUBDIRS=scriptingPlugins powermate alsaMixer xosd generic externalPlugins soundVisualization cpuUsage x11 xmmsControl bmpControl lirc
++SUBDIRS=scriptingPlugins powermate alsaMixer xosd generic externalPlugins soundVisualization cpuUsage x11 bmpControl lirc
+Index: gizmod-2.3/plugins/externalPlugins/Makefile.am
+===================================================================
+--- gizmod-2.3.orig/plugins/externalPlugins/Makefile.am
++++ gizmod-2.3/plugins/externalPlugins/Makefile.am
+@@ -1 +1 @@
+-SUBDIRS=xmms bmp
++SUBDIRS=bmp
--- /dev/null
+Index: gizmod-2.3/configure.ac
+===================================================================
+--- gizmod-2.3.orig/configure.ac
++++ gizmod-2.3/configure.ac
+@@ -162,11 +162,7 @@ CFLAGS="$PYTHON_INC $CFLAGS"
+ # AC_MSG_ERROR([Cannot find python.h!])
+ # ])
+
+-AC_CHECK_FILE(${py_prefix}/include/python${py_ver}/Python.h, [
+- AC_DEFINE(HAVE_PYTHON_H, 1, [Has Python.h])
+- ], [
+- AC_MSG_ERROR([Cannot find Python.h!])
+- ])
++AC_DEFINE(HAVE_PYTHON_H, 1, [Has Python.h])
+
+ CFLAGS="$OLD_CFLAGS"
+
--- /dev/null
+DESCRIPTION = "Gizmo Daemon"
+HOMEPAGE = "http://gizmod.sourceforge.net"
+LICENSE = "GPLv2"
+MAINTAINER = "Justin Patrin <papercrane@reversefold.com>"
+SECTION = "console/multimedia"
+DEPENDS = "python virtual/libx11 xf86vidmodeproto"
+SRC_URI = "${SOURCEFORGE_MIRROR}/gizmod/gizmod-${PV}.tar.bz2 \
+ file://disable-xmms.patch;patch=1 \
+ file://fix-python-configure.patch;patch=1 \
+ file://disable-bmp.patch;patch=1"
+
+PR = "r0"
+
+inherit autotools
+
+EXTRA_OECONF = "--disable-xmms --disable-bmp --disable-xosd"
+
+#do_configure_prepend() {
+# sed -i 's/TARGET_SYS/${TARGET_SYS}/' ${S}/configure.ac
+#}
+
+FILES_${PN} += "${datadir}/gizmo/scripts ${datadir}/gizmo/plugins/*.so ${datadir}/gizmo/plugins/*.so.*"
+FILES_${PN}-dev += "${datadir}/gizmo/plugins/*.a ${datadir}/gizmo/plugins/*.la"
+FILES_${PN}-dbg += "${datadir}/gizmo/plugins/.debug"
\ No newline at end of file
--- /dev/null
+LICENSE = "GPL"
+DESCRIPTION = "Cellphone tools and driver software"
+SRC_URI = "http://www.gnokii.org/download/gnokii/gnokii-${PV}.tar.bz2 \
+ file://configure.patch;patch=1"
+
+DEPENDS = "libxpm gtk+"
+
+inherit autotools pkgconfig
+
+PARALLEL_MAKE = ""
+
+PACKAGES += "libgnokii libgnokii-dev"
+
+FILES_${PN} = "${bindir} ${sbindir}"
+FILES_libgnokii-dev = "${includedir} ${libdir}/lib*.so ${libdir}/*.la \
+ ${libdir}/*.a ${libdir}/*.o ${libdir}/pkgconfig \
+ /lib/*.a /lib/*.o ${datadir}/aclocal"
+FILES_${PN}-dev = ""
+FILES_libgnokii = "${libdir}/libgnokii.so.*"
+
+do_stage() {
+ autotools_stage_includes
+
+ oe_libinstall -C common -so libgnokii ${STAGING_LIBDIR}
+}
+
FILES_${PN}-dev = ""
FILES_libgnokii = "${libdir}/libgnokii.so.*"
+do_compile_prepend() {
+ sed -i s:foo::g Makefile.global
+}
+
do_stage() {
autotools_stage_includes
DEPENDS = "libxml2 gconf gnutls avahi dbus bzip2 gnome-mime-data zlib"
RRECOMMENDS = "gnome-vfs-plugin-file gnome-mime-data shared-mime-info"
-PR = "r1"
+PR = "r2"
inherit gnome
# This is to provide compatibility with the gnome-vfs DBus fork
PROVIDES = "gnome-vfs-plugin-dbus"
-RRPEPLACES = "gnome-vfs-dbus"
+RREPLACES = "gnome-vfs-dbus"
SRC_URI += "file://gconftool-lossage.patch;patch=1;pnum=1 \
file://gnome-vfs-no-kerberos.patch;patch=1;pnum=0"
--- /dev/null
+LICENSE = "LGPL"
+DESCRIPTION = "A library to make creating GObjects easier"
+HOMEPAGE = "http://www.5z.com/jirka/gob.html"
+SECTION = "libs"
+DEPENDS = "gtk+ bison flex"
+SRC_URI = "http://ftp.5z.com/pub/gob/gob2-${PV}.tar.gz"
+
+inherit autotools pkgconfig
+
+do_compile_prepend() {
+ find ${S} -name Makefile | xargs sed -i 's~-I/usr/include~-I${STAGING_INCDIR}~g'
+ find ${S} -name Makefile | xargs sed -i 's~-I$(includedir)~-I${STAGING_INCDIR}~g'
+}
+
+do_stage_append() {
+ install -m 0644 ${S}/gob2.m4 ${STAGING_DATADIR}/aclocal
+}
SECTION = "gpe"
inherit gpe
-DEPENDS = "virtual/libx11 esound-gpe"
-RDEPENDS_${PN} = "esd"
+DEPENDS = "virtual/libx11 esound"
SRC_URI += "file://makefile-breakage.patch;patch=1"
DESCRIPTION = "Plugins for GStreamer"
SECTION = "multimedia"
PRIORITY = "optional"
-DEPENDS = "gstreamer libmikmod libmad liboil libogg tremor libvorbis libid3tag esound-gpe"
+DEPENDS = "gstreamer libmikmod libmad liboil libogg tremor libvorbis libid3tag esound"
PR = "r1"
PACKAGES_DYNAMIC = "gst-plugin-*"
--- /dev/null
+--- gtk+-2.6.10/gtk/gtkstatusbar.h 2005/03/20 07:01:22 1.17
++++ gtk+-2.6.10/gtk/gtkstatusbar.h 2005/12/06 14:25:30 1.17.2.1
+@@ -65,7 +65,7 @@
+ {
+ GtkHBoxClass parent_class;
+
+- GMemChunk *messages_mem_chunk;
++ gpointer messages_mem_chunk;
+
+ void (*text_pushed) (GtkStatusbar *statusbar,
+ guint context_id,
+--- gtk+-2.6.10/gtk/gtkstatusbar.c 2005/07/21 19:10:48 1.56
++++ gtk+-2.6.10/gtk/gtkstatusbar.c 2005/12/06 14:25:30 1.56.2.1
+@@ -302,7 +302,7 @@
+ g_return_val_if_fail (text != NULL, 0);
+
+ class = GTK_STATUSBAR_GET_CLASS (statusbar);
+- msg = g_chunk_new (GtkStatusbarMsg, class->messages_mem_chunk);
++ msg = g_chunk_new (GtkStatusbarMsg, (GMemChunk *)class->messages_mem_chunk);
+ msg->text = g_strdup (text);
+ msg->context_id = context_id;
+ msg->message_id = statusbar->seq_message_id++;
+@@ -343,7 +343,7 @@
+ statusbar->messages = g_slist_remove_link (statusbar->messages,
+ list);
+ g_free (msg->text);
+- g_mem_chunk_free (class->messages_mem_chunk, msg);
++ g_mem_chunk_free ((GMemChunk *)class->messages_mem_chunk, msg);
+ g_slist_free_1 (list);
+ break;
+ }
+@@ -394,7 +394,7 @@
+ class = GTK_STATUSBAR_GET_CLASS (statusbar);
+ statusbar->messages = g_slist_remove_link (statusbar->messages, list);
+ g_free (msg->text);
+- g_mem_chunk_free (class->messages_mem_chunk, msg);
++ g_mem_chunk_free ((GMemChunk *)class->messages_mem_chunk, msg);
+ g_slist_free_1 (list);
+
+ break;
+@@ -459,7 +459,7 @@
+
+ msg = list->data;
+ g_free (msg->text);
+- g_mem_chunk_free (class->messages_mem_chunk, msg);
++ g_mem_chunk_free ((GMemChunk *)class->messages_mem_chunk, msg);
+ }
+ g_slist_free (statusbar->messages);
+ statusbar->messages = NULL;
LICENSE = "LGPL"
PRIORITY = "optional"
DEPENDS = "glib-2.0 pango atk jpeg libpng libxext libxcursor gtk-doc libgcrypt"
-PR = "r4"
+PR = "r7"
SRC_URI = "ftp://ftp.gtk.org/pub/gtk/v2.6/gtk+-${PV}.tar.bz2 \
file://help.patch;patch=1 \
file://no-xwc.patch;patch=1 \
file://automake-lossage.patch;patch=1 \
file://gtk+-handhelds.patch;patch=1 \
- file://spinbutton.patch;patch=1 \
- file://hardcoded_libtool.patch;patch=1 \
- file://disable-tooltips.patch;patch=1 \
- file://gtklabel-resize-patch;patch=1 \
- file://menu-deactivate.patch;patch=1 \
- file://xsettings.patch;patch=1 \
- file://scroll-timings.patch;patch=1 \
- file://small-gtkfilesel.patch;patch=1 \
- file://migration.patch;patch=1;pnum=0 \
- file://single-click.patch;patch=1 \
- file://menu-styling.patch;patch=1"
+ file://spinbutton.patch;patch=1 \
+ file://hardcoded_libtool.patch;patch=1 \
+ file://disable-tooltips.patch;patch=1 \
+ file://gtklabel-resize-patch;patch=1 \
+ file://menu-deactivate.patch;patch=1 \
+ file://xsettings.patch;patch=1 \
+ file://scroll-timings.patch;patch=1 \
+ file://small-gtkfilesel.patch;patch=1 \
+ file://migration.patch;patch=1;pnum=0 \
+ file://single-click.patch;patch=1 \
+ file://menu-styling.patch;patch=1 \
+ file://compile-against-newer-glib.patch;patch=1"
inherit autotools pkgconfig
LIBV = "2.4.0"
+do_configure_prepend() {
+ for i in `find . -name "Makefile.am"`
+ do
+ sed -i -e s,-DG_DISABLE_DEPRECATED,-DSED_ROCKS_DUDES, $i
+ done
+}
+
do_stage () {
oe_libinstall -so -C gtk libgtk-x11-2.0 ${STAGING_LIBDIR}
oe_libinstall -so -C gdk libgdk-x11-2.0 ${STAGING_LIBDIR}
--- /dev/null
+d root root 0700 /var/run/hald none
SECTION = "unknown"
LICENSE = "GPL LGPL AFL"
-DEPENDS = "dbus-glib expat libusb"
+DEPENDS = "dbus-glib udev intltool expat libusb"
RDEPENDS += "udev"
#RDEPENDS_hal-device-manager = "python hal python-pygnome"
RRECOMMENDS = "udev-utils"
-PR = "r1"
+PR = "r2"
-SRC_URI = "http://freedesktop.org/~david/dist/hal-${PV}.tar.gz"
+SRC_URI = "http://freedesktop.org/~david/dist/hal-${PV}.tar.gz \
+ file://99_hal"
S = "${WORKDIR}/hal-${PV}"
--disable-policy-kit \
"
+do_install_append() {
+ install -d ${D}/etc/default/volatiles
+ install -m 0644 ${WORKDIR}/99_hal ${D}/etc/default/volatiles
+}
+
do_stage() {
autotools_stage_all
install -d ${STAGING_LIBDIR}
install -m 755 libhal-storage/.libs/libhal-storage.so.1.0.0 ${STAGING_LIBDIR}/libhal-storage.so
}
+# At the time the postinst runs, dbus might not be setup so only restart if running
+pkg_postinst_hal () {
+ # can't do this offline
+ if [ "x$D" != "x" ]; then
+ exit 1
+ fi
+
+ /etc/init.d/populate-volatile.sh update
+
+ grep haldaemon /etc/group || addgroup haldaemon
+ grep haldaemon /etc/passwd || adduser --disabled-password --system --home /var/run/hald --no-create-home haldaemon --ingroup haldaemon -g HAL
+
+ DBUSPID=`pidof dbus-daemon`
+
+ if [ "x$DBUSPID" != "x" ]; then
+ /etc/init.d/dbus-1 force-reload
+ fi
+}
+
+pkg_postrm_hal () {
+ deluser haldaemon || true
+ delgroup haldaemon || true
+}
+
#PACKAGES += "hal-device-manager"
#FILES_hal-device-manager = " \
DESCRIPTION = "Generic SlugOS image"
HOMEPAGE = "http://www.nslu2-linux.org"
LICENSE = "MIT"
-PR = "r43"
+PR = "r44"
COMPATIBLE_MACHINE = "nslu2"
# it is a bad idea to produce flash images without a valid RedBoot - that allows
# an innocent user upgrade attempt to instantly brick the NSLU2.
PACK_IMAGE += "${@['', 'slugos_pack_image;'][bb.data.getVar('SLUGOS_FLASH_IMAGE', d, 1) == '1']}"
-PACK_IMAGE_DEPENDS += "${@['', 'slugimage-native nslu2-linksys-firmware apex ixp4xx-npe'][bb.data.getVar('SLUGOS_FLASH_IMAGE', d, 1) == '1']}"
+PACK_IMAGE_DEPENDS += "${@['', 'slugimage-native nslu2-linksys-firmware ixp4xx-npe'][bb.data.getVar('SLUGOS_FLASH_IMAGE', d, 1) == '1']}"
NSLU2_SLUGIMAGE_ARGS ?= ""
${STAGING_LIBDIR}/nslu2-binaries/Trailer \
${STAGING_LIBDIR}/nslu2-binaries/SysConf \
${DEPLOY_DIR_IMAGE}/slug/
- install -m 0644 ${STAGING_LOADER_DIR}/apex.bin ${DEPLOY_DIR_IMAGE}/slug/
- install -m 0644 ${DEPLOY_DIR_IMAGE}/zImage-nslu2${ARCH_BYTE_SEX} \
+ install -m 0644 ${DEPLOY_DIR_IMAGE}/zImage-nslu2${SITEINFO_ENDIANESS} \
${DEPLOY_DIR_IMAGE}/slug/vmlinuz
install -m 0644 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \
${DEPLOY_DIR_IMAGE}/slug/flashdisk.jffs2
install -m 0644 ${STAGING_FIRMWARE_DIR}/NPE-B ${DEPLOY_DIR_IMAGE}/slug/
cd ${DEPLOY_DIR_IMAGE}/slug
- slugimage -p -b RedBoot -s SysConf -L apex.bin -k vmlinuz \
- -r Flashdisk:flashdisk.jffs2 -m NPE-B -t Trailer \
+ slugimage -p -b RedBoot -s SysConf -k vmlinuz \
+ -r Ramdisk:1,Flashdisk:flashdisk.jffs2 -m NPE-B -t Trailer \
-o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}-nslu2.bin \
${NSLU2_SLUGIMAGE_ARGS}
rm -rf ${DEPLOY_DIR_IMAGE}/slug
# Create an image for the DSM-G600 as well
install -d ${DEPLOY_DIR_IMAGE}/firmupgrade
- install -m 0755 ${DEPLOY_DIR_IMAGE}/zImage-dsmg600${ARCH_BYTE_SEX} \
+ install -m 0755 ${DEPLOY_DIR_IMAGE}/zImage-dsmg600${SITEINFO_ENDIANESS} \
${DEPLOY_DIR_IMAGE}/firmupgrade/ip-ramdisk
install -m 0644 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \
${DEPLOY_DIR_IMAGE}/firmupgrade/rootfs.gz
# Create an image for the NAS 100d as well
install -d ${DEPLOY_DIR_IMAGE}/firmupgrade
- install -m 0755 ${DEPLOY_DIR_IMAGE}/zImage-nas100d${ARCH_BYTE_SEX} \
+ install -m 0755 ${DEPLOY_DIR_IMAGE}/zImage-nas100d${SITEINFO_ENDIANESS} \
${DEPLOY_DIR_IMAGE}/firmupgrade/ip-ramdisk
install -m 0644 ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \
${DEPLOY_DIR_IMAGE}/firmupgrade/rootfs.gz
# and finally write the new mtab.
# This part is only needed if the rootfs was mounted ro.
#
-if [ $(grep rootfs /proc/mounts | awk '{print $4}') = rw ]; then
- exit 0
+ROOTFSDEV="/dev/root"
+if ! grep -q "^$ROOTFSDEV\w" /proc/mounts; then
+ ROOTFSDEV="rootfs"
fi
-
-# Add a second check, which seems to be needed for some kernel versions
-if [ $(grep "/dev/root" /proc/mounts | awk '{print $4}') = rw ]; then
- exit 0
+if [ $(grep "^$ROOTFSDEV\w" /proc/mounts | awk '{print $4}') = rw ]; then
+ echo "Root filesystem already read-write, not remounting"
+ exit 0
fi
-
echo "Remounting root file system..."
mount -n -o remount,$rootmode /
if test "$rootmode" = rw
DEPENDS_openzaurus = "makedevs virtual/kernel"
RDEPENDS = "makedevs"
LICENSE = "GPL"
-PR = "r85"
+PR = "r86"
SRC_URI = "file://halt \
file://ramdisk \
--- /dev/null
+--- ipkg-0.99.163.orig/ipkg_download.c Thu Apr 20 20:18:29 2006
++++ ipkg-0.99.163/ipkg_download.c Thu Jan 18 05:54:52 2007
+@@ -108,6 +108,7 @@
+ {
+ int err;
+ char *url;
++ char *filename;
+
+ if (pkg->src == NULL) {
+ ipkg_message(conf,IPKG_ERROR, "ERROR: Package %s (parent %s) is not available from any configured src.\n",
+@@ -117,11 +118,16 @@
+
+ sprintf_alloc(&url, "%s/%s", pkg->src->value, pkg->filename);
+
+- /* XXX: BUG: The pkg->filename might be something like
++ /* The pkg->filename might be something like
+ "../../foo.ipk". While this is correct, and exactly what we
+ want to use to construct url above, here we actually need to
+ use just the filename part, without any directory. */
+- sprintf_alloc(&pkg->local_filename, "%s/%s", dir, pkg->filename);
++ filename = strrchr(pkg->filename, '/');
++ if(NULL == filename)
++ filename = pkg->filename;
++ else
++ filename++;
++ sprintf_alloc(&pkg->local_filename, "%s/%s", dir, filename);
+
+ err = ipkg_download(conf, url, pkg->local_filename);
+ free(url);
S = "${WORKDIR}/ipkg-${PV}"
SRC_URI = "http://www.handhelds.org/pub/packages/ipkg/ipkg-${PV}.tar.gz \
- file://terse.patch;patch=1"
-
+ file://terse.patch;patch=1 \
+ file://patch-ipkg-localfilename;patch=0"
do_stage() {
oe_libinstall -so libipkg ${STAGING_LIBDIR}
S = "${WORKDIR}"
COMPATIBLE_HOST = "^arm.*-linux.*"
+COMPATIBLE_MACHINE = "(nslu2|ixp4xx)"
PROVIDES = "virtual/ixp-eth"
RPROVIDES = "ixp-eth"
# This is a somewhat arbitrary choice:
OSAL_DIR = "${STAGING_KERNEL_DIR}/ixp_osal"
-IX_TARGET = "linux${ARCH_BYTE_SEX}"
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
EXTRA_OEMAKE = "'CC=${KERNEL_CC}' \
'LD=${KERNEL_LD}' \
S = "${WORKDIR}"
COMPATIBLE_HOST = "^arm.*-linux.*"
+COMPATIBLE_MACHINE = "(nslu2|ixp4xx)"
PROVIDES = "virtual/ixp-eth"
RPROVIDES = "ixp-eth"
# This is a somewhat arbitrary choice:
OSAL_DIR = "${STAGING_KERNEL_DIR}/ixp_osal"
-IX_TARGET = "linux${ARCH_BYTE_SEX}"
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
IX_ENSURE = ""
#IX_ENSURE = "-DIX_OSAL_ENSURE_ON=1"
# The following controls the name of the ethernet devices which get
S = "${WORKDIR}"
COMPATIBLE_HOST = "^arm.*-linux.*"
+COMPATIBLE_MACHINE = "(nslu2|ixp4xx)"
PROVIDES = "virtual/ixp-eth"
RPROVIDES = "ixp-eth"
# This is a somewhat arbitrary choice:
OSAL_DIR = "${STAGING_KERNEL_DIR}/ixp_osal"
-IX_TARGET = "linux${ARCH_BYTE_SEX}"
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
IX_ENSURE = ""
#IX_ENSURE = "-DIX_OSAL_ENSURE_ON=1"
# The following controls the name of the ethernet devices which get
inherit module
-IX_TARGET = "linux${ARCH_BYTE_SEX}"
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
EXTRA_OEMAKE = "'CC=${KERNEL_CC}' \
'LD=${KERNEL_LD}' \
addtask pre_patch before do_patch
-IX_TARGET = "linux${ARCH_BYTE_SEX}"
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
IX_ENSURE = ""
#IX_ENSURE = "IX_OSAL_ENSURE_ON=1"
inherit module
-IX_TARGET = "linux${ARCH_BYTE_SEX}"
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
IX_ENSURE = ""
#IX_ENSURE = "IX_OSAL_ENSURE_ON=1"
inherit module
-IX_TARGET = "linux${ARCH_BYTE_SEX}"
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
OSAL_PATH = "lib/ixp425/linux/${IX_TARGET}"
# This is a somewhat arbitrary choice:
addtask pre_patch before do_patch
-IX_TARGET = "linux${ARCH_BYTE_SEX}"
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
IX_ENSURE = ""
#IX_ENSURE = "IX_OSAL_ENSURE_ON=1"
inherit module
-IX_TARGET = "linux${ARCH_BYTE_SEX}"
+IX_TARGET = "linux${SITEINFO_ENDIANESS}"
IX_ENSURE = ""
#IX_ENSURE = "IX_OSAL_ENSURE_ON=1"
FILES_${PN} = "${base_libdir}/firmware/NPE-B"
do_compile() {
-# if test '${ARCH_BYTE_SEX}' = be
-# then
- ${STAGING_BINDIR_NATIVE}/IxNpeMicrocode-${PV} -be
-# fi
-# if test '${ARCH_BYTE_SEX}' = le
-# then
-# ${STAGING_BINDIR_NATIVE}/IxNpeMicrocode-${PV} -le
-# fi
+ ${STAGING_BINDIR_NATIVE}/IxNpeMicrocode-${PV} -be
}
do_install() {
FILES_${PN} = "${base_libdir}/firmware/NPE-B"
do_compile() {
-# if test '${ARCH_BYTE_SEX}' = be
-# then
- ${STAGING_BINDIR_NATIVE}/IxNpeMicrocode-${PV} -be
-# fi
-# if test '${ARCH_BYTE_SEX}' = le
-# then
-# ${STAGING_BINDIR_NATIVE}/IxNpeMicrocode-${PV} -le
-# fi
+ ${STAGING_BINDIR_NATIVE}/IxNpeMicrocode-${PV} -be
}
do_install() {
RDEPENDS = "initscripts console-tools"
LICENSE = "GPL"
PACKAGE_ARCH = "${MACHINE}"
-PR = "r12"
+PR = "r13"
inherit update-rc.d
install -m 0755 ${WORKDIR}/keymap ${D}${sysconfdir}/init.d/
case ${MACHINE} in
- c7x0 | tosa | spitz | akita | borzoi | collie | poodle | jornada6xx | h2200 | htuniversal )
+ c7x0 | tosa | spitz | akita | borzoi | collie | poodle | jornada6xx | h2200 | htcuniversal )
install -m 0644 ${WORKDIR}/keymap-*.map ${D}${sysconfdir}
;;
*)
--- /dev/null
+Index: libnl-0.5.0/lib/helpers.c
+===================================================================
+--- libnl-0.5.0.orig/lib/helpers.c
++++ libnl-0.5.0/lib/helpers.c
+@@ -29,6 +29,7 @@
+ #include <netlink/netlink.h>
+ #include <netlink/helpers.h>
+ #include <linux/socket.h>
++#include <linux/if_ether.h>
+
+ int nl_debug = 0;
+
+Index: libnl-0.5.0/lib/route/filter.c
+===================================================================
+--- libnl-0.5.0.orig/lib/route/filter.c
++++ libnl-0.5.0/lib/route/filter.c
+@@ -40,6 +40,7 @@
+ #include <netlink/route/filter.h>
+ #include <netlink/route/link.h>
+ #include <netlink/route/rtattr.h>
++#include <linux/if_ether.h>
+
+ static struct rtnl_filter_ops *filter_ops;
+
+Index: libnl-0.5.0/lib/Makefile
+===================================================================
+--- libnl-0.5.0.orig/lib/Makefile
++++ libnl-0.5.0/lib/Makefile
+@@ -68,7 +68,7 @@ distclean:
+
+ install:
+ mkdir -p $(DESTDIR)$(prefix)/lib/
+- install -o root -g root -m 0644 $(OUT_SLIB) $(DESTDIR)$(prefix)/lib
++ install -m 0644 $(OUT_SLIB) $(DESTDIR)$(prefix)/lib
+ rm -f $(DESTDIR)$(prefix)/lib/$(LN1_SLIB) ; \
+ $(LN) -s $(DESTDIR)$(prefix)/lib/$(OUT_SLIB) $(DESTDIR)$(prefix)/lib/$(LN1_SLIB)
+ rm -f $(DESTDIR)$(prefix)/lib/$(LN_SLIB) ; \
+Index: libnl-0.5.0/include/Makefile
+===================================================================
+--- libnl-0.5.0.orig/include/Makefile
++++ libnl-0.5.0/include/Makefile
+@@ -37,5 +37,5 @@ distclean:
+
+ install:
+ mkdir -p $(DESTDIR)$(prefix)/include/netlink/route/
+- install -o root -g root -m 0644 netlink/*.h $(DESTDIR)$(prefix)/include/netlink/
+- install -o root -g root -m 0644 netlink/route/*.h $(DESTDIR)$(prefix)/include/netlink/route/
++ install -m 0644 netlink/*.h $(DESTDIR)$(prefix)/include/netlink/
++ install -m 0644 netlink/route/*.h $(DESTDIR)$(prefix)/include/netlink/route/
--- /dev/null
+--- libnl-0.5.0.orig/include/netlink/route/tc.h 2005-09-08 19:13:15.000000000 -0300
++++ libnl-0.5.0/include/netlink/route/tc.h 2005-09-08 19:32:33.000000000 -0300
+@@ -24,6 +24,7 @@
+ #include <netlink/netlink.h>
+ #include <netlink/cache.h>
+ #include <netlink/data.h>
++#include <linux/pkt_sched.h>
+
+ #define TCA_HAS_HANDLE 0x001
+ #define TCA_HAS_PARENT 0x002
--- /dev/null
+DESCRIPTION = "Netlink library"
+HOMEPAGE = "http://people.suug.ch/~tgr/libnl/"
+SECTION = "libraries/network"
+LICENSE = "GPLv2.1"
+PR = "r0"
+
+SRC_URI = "http://people.suug.ch/~tgr/libnl/files/libnl-0.5.0.tar.gz \
+ file://libnl-0.5.0-include.diff;patch=1 \
+ file://fix-helpers.patch;patch=1"
+
+inherit autotools
SECTION = "x11/libs"
inherit gpe
LICENSE = "LGPL"
-DEPENDS = "esound-gpe"
+DEPENDS = "esound"
do_stage() {
install -d ${STAGING_INCDIR}/gpe
SECTION = "libs"
PRIORITY = "optional"
LICENSE = "GPL"
-DEPENDS = "zlib libogg libvorbis tremor libmad libmodplug esound-gpe virtual/libx11 libxext libpng"
+DEPENDS = "zlib libogg libvorbis tremor libmad libmodplug esound virtual/libx11 libxext libpng"
PROVIDES = "virtual/libxine"
PR = "r0"
SECTION = "libs"
PRIORITY = "optional"
LICENSE = "GPL"
-DEPENDS = "zlib libogg libvorbis tremor libmad libmodplug esound-gpe virtual/libx11 libxext libpng"
+DEPENDS = "zlib libogg libvorbis tremor libmad libmodplug esound virtual/libx11 libxext libpng"
PROVIDES = "virtual/libxine"
PR = "r1"
do_svnpatch() {
svn co ${IXP4XX_KERNEL_SVN_REPO}/patches/${IXP4XX_KERNEL_PATCH_DIR} --revision ${IXP4XX_KERNEL_SVN_REV} ${WORKDIR}/patches-${PV}
- cp ${WORKDIR}/patches-${PV}/defconfig ${WORKDIR}/defconfig
+ if [ ! -f ${WORKDIR}/defconfig ] ; then \
+ cp ${WORKDIR}/patches-${PV}/defconfig ${WORKDIR}/defconfig ; \
+ fi
rm -rf ${S}/patches
cd ${S} && ln -s ${WORKDIR}/patches-${PV} ${S}/patches
+ if [ -f ${WORKDIR}/series ] ; then \
+ cp ${WORKDIR}/series ${WORKDIR}/patches-${PV}/series ; \
+ fi
cd ${S} && rm -rf .pc && ${STAGING_BINDIR_NATIVE}/quilt push -av
}
SRC_URI += "${IXP4XX_PATCHES}"
COMPATIBLE_HOST = 'arm.*-linux.*'
-COMPATIBLE_MACHINE = '(ixp4xx|loft|nslu2|nas100d|dsmg600|fsg3)'
+COMPATIBLE_MACHINE = '(ixp4xx|nslu2)'
inherit kernel
do_configure_prepend() {
rm -f ${S}/.config
echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >>'${S}/.config'
- if test '${ARCH_BYTE_SEX}' = be
+ if test '${SITEINFO_ENDIANESS}' = be
then
echo 'CONFIG_CPU_BIG_ENDIAN=y' >>'${S}/.config'
fi
# The generic package only includes the generic image, the other
# packages are made below (they are kernel-image packages but
# with a different ARCH).
-FILES_kernel-image = "/boot/${KERNEL_IMAGETYPE}-${IXP4XX_SUFFIX}-${KERNEL_VERSION}"
+FILES_kernel-image = "/boot/${KERNEL_IMAGETYPE}-${MACHINE_ARCH}-${KERNEL_VERSION}"
# MACHINE DEFINITIONS: one block for each machine
nslu2_MACHID = "597"
PACKAGES += "kernel-image-nslu2"
PKG_kernel-image-nslu2 = "kernel-image-${KERNEL_VERSION}"
-PACKAGE_ARCH_kernel-image-nslu2 = "nslu2${ARCH_BYTE_SEX}"
+PACKAGE_ARCH_kernel-image-nslu2 = "nslu2${SITEINFO_ENDIANESS}"
DESCRIPTION_kernel-image-nslu2 = "Linux kernel for the LinkSys NSLU2"
-FILES_kernel-image-nslu2 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${ARCH_BYTE_SEX}-${KERNEL_VERSION}"
+FILES_kernel-image-nslu2 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${SITEINFO_ENDIANESS}-${KERNEL_VERSION}"
pkg_postinst_kernel-image-nslu2 () {
- update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${ARCH_BYTE_SEX}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
+ update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${SITEINFO_ENDIANESS}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
}
pkg_postrm_kernel-image-nslu2 () {
- update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${ARCH_BYTE_SEX}-${KERNEL_VERSION} || true
-}
-
-# The correct settings for Loft:
-loft_MACHID = "849"
-PACKAGES += "kernel-image-loft"
-PKG_kernel-image-loft = "kernel-image-${KERNEL_VERSION}"
-PACKAGE_ARCH_kernel-image-loft = "loft${ARCH_BYTE_SEX}"
-DESCRIPTION_kernel-image-loft = "Linux kernel for the Giant Shoulder Inc. Loft board"
-FILES_kernel-image-loft = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-loft${ARCH_BYTE_SEX}-${KERNEL_VERSION}"
-pkg_postinst_kernel-image-loft () {
- update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-loft${ARCH_BYTE_SEX}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
-}
-pkg_postrm_kernel-image-loft () {
- update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-loft${ARCH_BYTE_SEX}-${KERNEL_VERSION} || true
+ update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nslu2${SITEINFO_ENDIANESS}-${KERNEL_VERSION} || true
}
# The correct settings for the NAS100D board:
nas100d_MACHID = "865"
PACKAGES += "kernel-image-nas100d"
PKG_kernel-image-nas100d = "kernel-image-${KERNEL_VERSION}"
-PACKAGE_ARCH_kernel-image-nas100d = "nas100d${ARCH_BYTE_SEX}"
+PACKAGE_ARCH_kernel-image-nas100d = "nas100d${SITEINFO_ENDIANESS}"
DESCRIPTION_kernel-image-nas100d = "Linux kernel for the IOMega NAS100D"
-FILES_kernel-image-nas100d = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${ARCH_BYTE_SEX}-${KERNEL_VERSION}"
+FILES_kernel-image-nas100d = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${SITEINFO_ENDIANESS}-${KERNEL_VERSION}"
pkg_postinst_kernel-image-nas100d () {
- update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${ARCH_BYTE_SEX}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
+ update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${SITEINFO_ENDIANESS}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
}
pkg_postrm_kernel-image-nas100d () {
- update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${ARCH_BYTE_SEX}-${KERNEL_VERSION} || true
+ update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-nas100d${SITEINFO_ENDIANESS}-${KERNEL_VERSION} || true
}
# The correct settings for the DSMG600 board:
dsmg600_MACHID = "964"
PACKAGES += "kernel-image-dsmg600"
PKG_kernel-image-dsmg600 = "kernel-image-${KERNEL_VERSION}"
-PACKAGE_ARCH_kernel-image-dsmg600 = "dsmg600${ARCH_BYTE_SEX}"
+PACKAGE_ARCH_kernel-image-dsmg600 = "dsmg600${SITEINFO_ENDIANESS}"
DESCRIPTION_kernel-image-dsmg600 = "Linux kernel for the D-Link DSM-G600"
-FILES_kernel-image-dsmg600 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_VERSION}"
+FILES_kernel-image-dsmg600 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${SITEINFO_ENDIANESS}-${KERNEL_VERSION}"
pkg_postinst_kernel-image-dsmg600 () {
- update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
+ update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${SITEINFO_ENDIANESS}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
}
pkg_postrm_kernel-image-dsmg600 () {
- update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${ARCH_BYTE_SEX}-${KERNEL_VERSION} || true
+ update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-dsmg600${SITEINFO_ENDIANESS}-${KERNEL_VERSION} || true
}
# The correct settings for the FSG-3 board:
fsg3_MACHID = "1091"
PACKAGES += "kernel-image-fsg3"
PKG_kernel-image-fsg3 = "kernel-image-${KERNEL_VERSION}"
-PACKAGE_ARCH_kernel-image-fsg3 = "fsg3${ARCH_BYTE_SEX}"
+PACKAGE_ARCH_kernel-image-fsg3 = "fsg3${SITEINFO_ENDIANESS}"
DESCRIPTION_kernel-image-fsg3 = "Linux kernel for the Freecom FSG-3"
-FILES_kernel-image-fsg3 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${ARCH_BYTE_SEX}-${KERNEL_VERSION}"
+FILES_kernel-image-fsg3 = "/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${SITEINFO_ENDIANESS}-${KERNEL_VERSION}"
pkg_postinst_kernel-image-fsg3 () {
- update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${ARCH_BYTE_SEX}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
+ update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${SITEINFO_ENDIANESS}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
}
pkg_postrm_kernel-image-fsg3 () {
- update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${ARCH_BYTE_SEX}-${KERNEL_VERSION} || true
+ update-alternatives --remove ${KERNEL_IMAGETYPE} /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-fsg3${SITEINFO_ENDIANESS}-${KERNEL_VERSION} || true
}
#FIXUP: the correct instructions to copy the kernel prepended with the le fixup
# Overwrite the unshimmed generic image with a shimmed one (but without
# any command line or machine id override).
rm -f '${D}/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-${KERNEL_VERISON}'
- install_image '${IXP4XX_SUFFIX}'
+ install_image '${MACHINE_ARCH}'
# Add the machine specific images, with appropriate suffixes
- install_image 'nslu2${ARCH_BYTE_SEX}' '${nslu2_MACHID}'
- install_image 'loft${ARCH_BYTE_SEX}' '${loft_MACHID}'
- install_image 'nas100d${ARCH_BYTE_SEX}' '${nas100d_MACHID}'
- install_image 'dsmg600${ARCH_BYTE_SEX}' '${dsmg600_MACHID}'
- install_image 'fsg3${ARCH_BYTE_SEX}' '${fsg3_MACHID}'
+ install_image 'nslu2${SITEINFO_ENDIANESS}' '${nslu2_MACHID}'
+ install_image 'nas100d${SITEINFO_ENDIANESS}' '${nas100d_MACHID}'
+ install_image 'dsmg600${SITEINFO_ENDIANESS}' '${dsmg600_MACHID}'
+ install_image 'fsg3${SITEINFO_ENDIANESS}' '${fsg3_MACHID}'
}
do_deploy[dirs] = "${S}"
do_deploy() {
install -d ${DEPLOY_DIR_IMAGE}
- deploy_image '${IXP4XX_SUFFIX}'
+ deploy_image '${MACHINE_ARCH}'
# And the machine specific images
- deploy_image 'nslu2${ARCH_BYTE_SEX}' '${nslu2_MACHID}'
- deploy_image 'loft${ARCH_BYTE_SEX}' '${loft_MACHID}'
- deploy_image 'nas100d${ARCH_BYTE_SEX}' '${nas100d_MACHID}'
- deploy_image 'dsmg600${ARCH_BYTE_SEX}' '${dsmg600_MACHID}'
- deploy_image 'fsg3${ARCH_BYTE_SEX}' '${fsg3_MACHID}'
+ deploy_image 'nslu2${SITEINFO_ENDIANESS}' '${nslu2_MACHID}'
+ deploy_image 'nas100d${SITEINFO_ENDIANESS}' '${nas100d_MACHID}'
+ deploy_image 'dsmg600${SITEINFO_ENDIANESS}' '${dsmg600_MACHID}'
+ deploy_image 'fsg3${SITEINFO_ENDIANESS}' '${fsg3_MACHID}'
}
addtask deploy before do_build after do_compile
-
-python () {
- # check for IXP4XX_SUFFIX - if not set then we don't know what to build,
- # also sanity check the SLUGOS_IMAGESEX
- sex = bb.data.getVar("SLUGOS_IMAGESEX", d, 1)
- if sex != 'little-endian' and sex != 'big-endian':
- raise bb.parse.SkipPackage("slugos kernels require SLUGOS_IMAGESEX")
- suffix = bb.data.getVar("IXP4XX_SUFFIX", d, 1)
- if suffix == '':
- raise bb.parse.SkipPackage("slugos kernels require IXP4XX_SUFFIX")
-}
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19
+# Sun Jan 14 08:22:40 2007
+#
+CONFIG_ARM=y
+CONFIG_GENERIC_TIME=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=m
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+CONFIG_ARCH_IXP4XX=y
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+
+#
+# Intel IXP4xx Implementation Options
+#
+
+#
+# IXP4xx Platforms
+#
+CONFIG_MACH_NSLU2=y
+CONFIG_MACH_AVILA=y
+CONFIG_MACH_LOFT=y
+# CONFIG_ARCH_ADI_COYOTE is not set
+CONFIG_ARCH_IXDP425=y
+# CONFIG_MACH_IXDPG425 is not set
+# CONFIG_MACH_IXDP465 is not set
+CONFIG_ARCH_IXCDP1100=y
+# CONFIG_ARCH_PRPMC1100 is not set
+CONFIG_MACH_NAS100D=y
+CONFIG_MACH_DSMG600=y
+CONFIG_ARCH_IXDP4XX=y
+CONFIG_MACH_FSG=y
+# CONFIG_MACH_GTWX5715 is not set
+
+#
+# IXP4xx Options
+#
+CONFIG_DMABOUNCE=y
+# CONFIG_IXP4XX_INDIRECT_PCI is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_XSCALE_PMU=y
+CONFIG_KEXEC=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" noirqdebug console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_IXP4XX=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=10240
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=m
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+CONFIG_SATA_VIA=m
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+CONFIG_PATA_ARTOP=m
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_IXP4XX_CF=m
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_IXP4XX_QMGR=y
+CONFIG_IXP4XX_NPE=y
+CONFIG_IXP4XX_NPE_FW_LOAD=y
+CONFIG_IXP4XX_NPE_FW_MTD=y
+CONFIG_IXP4XX_MAC=y
+CONFIG_IXP4XX_CRYPTO=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=m
+# CONFIG_R8169_NAPI is not set
+CONFIG_R8169_VLAN=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+CONFIG_VIA_VELOCITY=m
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_BCM43XX is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_IXP4XX_BEEPER=y
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=m
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_IXP4XX_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_IXP4XX=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_IOP3XX is not set
+CONFIG_I2C_ISA=m
+CONFIG_I2C_IXP4XX=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+CONFIG_W1=m
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_MATROX is not set
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+CONFIG_SENSORS_W83781D=m
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_SENSORS_AD7418=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_IXP4XX=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU_ACTIVITY=y
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA7111=m
+CONFIG_VIDEO_SAA7114=m
+CONFIG_VIDEO_VPX3220=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_BT848 is not set
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+CONFIG_VIDEO_STRADIS=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+# CONFIG_VIDEO_ZORAN_AVS6EYES is not set
+CONFIG_VIDEO_SAA7134=m
+# CONFIG_VIDEO_SAA7134_ALSA is not set
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+# CONFIG_VIDEO_CX88_BLACKBIRD is not set
+
+#
+# V4L USB devices
+#
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_USB_DSBR is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_VIDEO_VIDEOBUF=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_BUF=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# ALSA ARM devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_U132_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+CONFIG_USB_YEALINK=m
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+CONFIG_USB_ADUTUX=m
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_PHIDGET=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETMOTORCONTROL=m
+CONFIG_USB_PHIDGETSERVO=m
+# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_FTDI_ELAN=m
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+CONFIG_RTC_DRV_X1205=y
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1553 is not set
+CONFIG_RTC_DRV_ISL1208=y
+CONFIG_RTC_DRV_DS1672=y
+# CONFIG_RTC_DRV_DS1742 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
--- /dev/null
+# Patches numbered 00 are externally maintained (large) patchsets
+# Patches numbered 01 to 10 are for immediate push upstream, and
+# must be all able to be applied independently in any order.
+# Patches marked with ## need reworking and are currently disabled
+
+squashfs/squashfs.patch
+squashfs/squashfs-ramdisk.patch
+squashfs/squashfs-force-O2.patch
+squashfs/squashfs-lzma.patch
+squashfs/squashfs-Kconfig.patch
+squashfs/squashfs-Makefile.patch
+00-linux-2.6.19.2.patch
+01-nslu2-led-swap.patch
+05-mtdpart-redboot-partition-truncate.patch
+07-remove-avila-ixdp425-setup.patch
+08-avila-loft-setup.patch
+10-bridging-fix.patch
+11-mtdpart-redboot-config-byteswap.patch
+30-ixp4xx-npe-driver-0.3.1.patch
+37-ixp4xx-net-driver-improve-mac-handling-0.3.1.patch
+39-ixp4xx-net-driver-mtd-load-fw-0.3.1.patch
+40-avila-setup-mac.patch
+41-nslu2-setup-mac.patch
+42-nas100d-setup-mac.patch
+43-nslu2-mtd-microcode.patch
+44-nas100d-mtd-microcode.patch
+45-eeprom-new-notifier.patch
+50-leds-arm-cpu-activity.patch
+52-nas100d-mtd-load-mac.patch
+53-nslu2-mtd-load-mac.patch
+55-increase-entropy-pools.patch
+60-nas100d-artop-temp-fix.patch
+66-hwmon-ad7418.patch
+75-dsmg600-support.patch
+76-dsmg600-pwrbtn.patch
+78-velocity-BE.patch
+80-kexec-arm-r3.patch
+85-nslu2-rtc-fixup.patch
+86-nas100d-rtc-fixup.patch
+87-dsmg600-rtc-fixup.patch
+88-dsmg600-dflt-cmdline.patch
+88-nas100d-dflt-cmdline.patch
+88-nslu2-dflt-cmdline.patch
+95-pata-ixp4xx.patch
+96-fsg3-support.patch
+97-avila-setup-pata.patch
+98-sata_via-add-pata-cleanly.patch
+99-avila-mtd-microcode.patch
+99-avila-loft-mac-platform.patch
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20-rc5-git2
+# Wed Jan 24 01:08:16 2007
+#
+CONFIG_ARM=y
+CONFIG_GENERIC_TIME=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=m
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+CONFIG_ARCH_IXP4XX=y
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+
+#
+# Intel IXP4xx Implementation Options
+#
+
+#
+# IXP4xx Platforms
+#
+CONFIG_MACH_NSLU2=y
+CONFIG_MACH_AVILA=y
+CONFIG_MACH_LOFT=y
+# CONFIG_ARCH_ADI_COYOTE is not set
+CONFIG_ARCH_IXDP425=y
+# CONFIG_MACH_IXDPG425 is not set
+# CONFIG_MACH_IXDP465 is not set
+CONFIG_ARCH_IXCDP1100=y
+# CONFIG_ARCH_PRPMC1100 is not set
+CONFIG_MACH_NAS100D=y
+CONFIG_MACH_DSMG600=y
+CONFIG_ARCH_IXDP4XX=y
+CONFIG_MACH_FSG=y
+# CONFIG_MACH_GTWX5715 is not set
+
+#
+# IXP4xx Options
+#
+CONFIG_DMABOUNCE=y
+# CONFIG_IXP4XX_INDIRECT_PCI is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_IWMMXT is not set
+CONFIG_XSCALE_PMU=y
+CONFIG_KEXEC=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" noirqdebug console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+# CONFIG_NF_NAT_PPTP is not set
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_IXP4XX=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=10240
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+CONFIG_ISCSI_TCP=m
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=m
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+CONFIG_SATA_VIA=m
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+CONFIG_PATA_ARTOP=m
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+CONFIG_PATA_IXP4XX_CF=m
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_IXP4XX_QMGR=y
+CONFIG_IXP4XX_NPE=y
+CONFIG_IXP4XX_NPE_FW_LOAD=y
+CONFIG_IXP4XX_NPE_FW_MTD=y
+CONFIG_IXP4XX_MAC=y
+CONFIG_IXP4XX_CRYPTO=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=m
+# CONFIG_R8169_NAPI is not set
+CONFIG_R8169_VLAN=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+CONFIG_VIA_VELOCITY=m
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_BCM43XX is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_IXP4XX_BEEPER=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=m
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_IXP4XX_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_IXP4XX=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_IOP3XX is not set
+CONFIG_I2C_ISA=m
+CONFIG_I2C_IXP4XX=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+CONFIG_W1=m
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_MATROX is not set
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+CONFIG_SENSORS_W83781D=m
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_SENSORS_AD7418=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_IXP4XX=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU_ACTIVITY=y
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA7111=m
+CONFIG_VIDEO_SAA7114=m
+CONFIG_VIDEO_VPX3220=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_BT848 is not set
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+CONFIG_VIDEO_STRADIS=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+# CONFIG_VIDEO_ZORAN_AVS6EYES is not set
+CONFIG_VIDEO_SAA7134=m
+# CONFIG_VIDEO_SAA7134_ALSA is not set
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+# CONFIG_VIDEO_CX88_BLACKBIRD is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+
+#
+# V4L USB devices
+#
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_USB_DSBR is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_VIDEO_VIDEOBUF=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_BUF=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# ALSA ARM devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=m
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_U132_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+CONFIG_USB_YEALINK=m
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+CONFIG_USB_ADUTUX=m
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_PHIDGET=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETMOTORCONTROL=m
+CONFIG_USB_PHIDGETSERVO=m
+# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_FTDI_ELAN=m
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+CONFIG_RTC_DRV_X1205=y
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1553 is not set
+CONFIG_RTC_DRV_ISL1208=y
+CONFIG_RTC_DRV_DS1672=y
+# CONFIG_RTC_DRV_DS1742 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
--- /dev/null
+# Patches numbered 00 are externally maintained (large) patchsets
+# Patches numbered 01 to 10 are for immediate push upstream, and
+# must be all able to be applied independently in any order.
+# Patches marked with ## need reworking and are currently disabled
+
+squashfs/squashfs.patch
+squashfs/squashfs-ramdisk.patch
+squashfs/squashfs-force-O2.patch
+squashfs/squashfs-lzma.patch
+squashfs/squashfs-Kconfig.patch
+squashfs/squashfs-Makefile.patch
+07-remove-avila-ixdp425-setup.patch
+08-avila-loft-setup.patch
+09-avila-setup-pata.patch
+30-ixp4xx-npe-driver-0.3.1.patch
+37-ixp4xx-net-driver-improve-mac-handling.patch
+39-ixp4xx-net-driver-mtd-load-fw.patch
+40-avila-setup-mac.patch
+41-nslu2-setup-mac.patch
+42-nas100d-setup-mac.patch
+43-nslu2-mtd-microcode.patch
+44-nas100d-mtd-microcode.patch
+45-eeprom-new-notifier.patch
+50-leds-arm-cpu-activity.patch
+52-nas100d-mtd-load-mac.patch
+53-nslu2-mtd-load-mac.patch
+55-increase-entropy-pools.patch
+60-nas100d-artop-temp-fix.patch
+66-hwmon-ad7418.patch
+75-dsmg600-support.patch
+76-dsmg600-pwrbtn.patch
+78-velocity-BE.patch
+80-kexec-arm-r3.patch
+85-nslu2-rtc-fixup.patch
+86-nas100d-rtc-fixup.patch
+87-dsmg600-rtc-fixup.patch
+88-dsmg600-dflt-cmdline.patch
+88-nas100d-dflt-cmdline.patch
+88-nslu2-dflt-cmdline.patch
+96-fsg3-support.patch
+98-sata_via-pata-support-upstream.patch
+99-avila-mtd-microcode.patch
+99-avila-loft-mac-platform.patch
+++ /dev/null
-# Kernel for IXP4xx
-#
-# This bitbake file pulls patches and the defconfig straight
-# from the NSLU2-Linux SVN repository. Information about this
-# repository can be found at:
-# http://trac.nslu2-linux.org/kernel/
-#
-# The revision that is pulled from SVN is specified below
-IXP4XX_KERNEL_SVN_REV = "659"
-#
-# The directory containing the patches to be applied is
-# specified below
-IXP4XX_KERNEL_PATCH_DIR = "2.6.20"
-#
-# Increment the number below (i.e. the digits after PR) when
-# the changes in SVN between revisions include changes in the
-# patches applied to the kernel, rather than simply defconfig
-# changes
-PR = "r1.${IXP4XX_KERNEL_SVN_REV}"
-
-require ixp4xx-kernel.inc
-require ixp4xx-kernel-svnpatch.inc
--- /dev/null
+# Kernel for IXP4xx
+#
+# This bitbake file pulls patches and the defconfig straight
+# from the NSLU2-Linux SVN repository. Information about this
+# repository can be found at:
+# http://trac.nslu2-linux.org/kernel/
+#
+# The revision that is pulled from SVN is specified below
+IXP4XX_KERNEL_SVN_REV = "681"
+#
+# The directory containing the patches to be applied is
+# specified below
+IXP4XX_KERNEL_PATCH_DIR = "2.6.20"
+#
+# Increment the number below (i.e. the digits after PR) when
+# the changes in SVN between revisions include changes in the
+# patches applied to the kernel, rather than simply defconfig
+# changes
+PR = "r1.${IXP4XX_KERNEL_SVN_REV}"
+
+require ixp4xx-kernel.inc
+require ixp4xx-kernel-svnpatch.inc
+
+SRC_URI += "file://defconfig"
+SRC_URI += "file://series"
# http://trac.nslu2-linux.org/kernel/
#
# The revision that is pulled from SVN is specified below
-IXP4XX_KERNEL_SVN_REV = "647"
+IXP4XX_KERNEL_SVN_REV = "681"
#
# The directory containing the patches to be applied is
# specified below
require ixp4xx-kernel.inc
require ixp4xx-kernel-svnpatch.inc
+
+SRC_URI += "file://defconfig"
+SRC_URI += "file://series"
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19.2
-# Fri Jan 19 21:02:53 2007
+# Fri Jan 26 11:55:32 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_XFRM_TUNNEL=y
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
-# CONFIG_DRM is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_SIS is not set
+CONFIG_DRM_VIA=y
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
-CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
SECTION = "kernel"
DESCRIPTION = "Linux kernel for VIA EPiA"
LICENSE = "GPL"
-PR = "r0"
+PR = "r1"
KERNEL_CCSUFFIX = "-3.3.4"
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16.13
-# Thu May 18 19:40:25 2006
+# Sun Jan 21 10:52:04 2007
#
CONFIG_ARM=y
CONFIG_MMU=y
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
CONFIG_PXA_SPI=y
CONFIG_PXA_EZX_PCAP=y
CONFIG_PXA_EZX_PCAP_EMU=m
+CONFIG_PXA_EZX_PCAP_EMU_USB=y
+# CONFIG_PXA_EZX_PCAP_EMU_UART is not set
#
# Processor Type
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=1 ip=192.168.1.2:192.168.1.10:192.168.1.10:255.255.255.0:ezx:usb0:off console=ttyS2,115200n8 console=tty0"
+CONFIG_CMDLINE="console=ttyS2,115200n8 console=tty1 noinitrd root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5 ip=192.168.1.2:192.168.1.10:192.168.1.10:255.255.255.0:ezx:usb0:off debug mem=32M@0xA0000000 mem=16M@0xAC000000"
# CONFIG_XIP_KERNEL is not set
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_LEGACY_PTY_COUNT is not set
#
# IPMI
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
+CONFIG_TS0710_MUX=y
+CONFIG_TS0710_MUX_USB=y
#
# I2C support
#
# Motorola EZX devices
#
-# CONFIG_KEYPAD_A780 is not set
+CONFIG_KEYPAD_A780=y
# CONFIG_KEYPAD_E680 is not set
-# CONFIG_KEYLIGHT_A780 is not set
+CONFIG_KEYLIGHT_A780=y
+CONFIG_VIBRATOR_A780=y
# CONFIG_FMRADIO_E680 is not set
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_E680 is not set
CONFIG_LEDS_A780=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_BACKLIGHT_EZX=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y
+# CONFIG_BACKLIGHT_HP680 is not set
+CONFIG_BACKLIGHT_EZX=y
#
# Sound
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
HOMEPAGE = "http://www.openezx.org"
LICENSE = "GPL"
DEPENDS += "quilt-native"
-EZX = "ezx7"
+EZX = "ezx8"
PR = "${EZX}-r1"
inherit kernel
# source and patches
#
SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.16.tar.bz2 \
- http://people.openezx.org/stefan/patches/patches-2.6.16-2.6.16.13-ezx7.tar.bz2 \
+ http://www.openezx.org/download/patches-2.6.16-2.6.16.13-${EZX}.tar.bz2 \
+ \
+ ${RPSRC}/xscale_cache_workaround-r1.patch;patch=1;status=merged \
\
file://sa1100-rtc-gcc4.diff;patch=1 \
file://pxa-serial-gcc4.diff;patch=1 \
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-hnd0
+# Thu Jan 18 12:36:38 2007
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_MINIMAL_OOPS is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_USELIB=y
+# CONFIG_CORE_DUMP is not set
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_ESERIES is not set
+# CONFIG_MACH_A620 is not set
+# CONFIG_MACH_A716 is not set
+# CONFIG_ARCH_H1900 is not set
+# CONFIG_ARCH_H2200 is not set
+# CONFIG_ARCH_H3900 is not set
+# CONFIG_MACH_H4000 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_HX2750 is not set
+# CONFIG_ARCH_H5400 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_HTCUNIVERSAL is not set
+# CONFIG_MACH_HTCALPINE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HTCAPACHE is not set
+# CONFIG_MACH_BLUEANGEL is not set
+# CONFIG_MACH_HTCBEETLES is not set
+# CONFIG_ARCH_AXIMX5 is not set
+# CONFIG_ARCH_AXIMX3 is not set
+# CONFIG_ARCH_ROVERP1 is not set
+# CONFIG_ARCH_ROVERP5P is not set
+# CONFIG_MACH_XSCALE_PALMLD is not set
+# CONFIG_MACH_XSCALE_PALMTREO650 is not set
+# CONFIG_MACH_XSCALE_TREO680 is not set
+# CONFIG_MACH_TUNGE2 is not set
+# CONFIG_MACH_T3XSCALE is not set
+# CONFIG_MACH_XSCALE_PALMTT5 is not set
+# CONFIG_MACH_XSCALE_PALMTX is not set
+CONFIG_MACH_PALMZ72=y
+CONFIG_PALMZ72_AC97=y
+CONFIG_PALMZ72_PM=y
+CONFIG_GPIOED=m
+CONFIG_GPIOEDNG=m
+# CONFIG_MACH_OMAP_PALMTC is not set
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_RTC_EPOCH=1970
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_GPIO_KEYS is not set
+
+#
+# Linux As Bootloader
+#
+# CONFIG_LAB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARMBOOT_PROC is not set
+CONFIG_XSCALE_PMU=y
+# CONFIG_KEXEC is not set
+
+#
+# Compaq/iPAQ Platforms
+#
+
+#
+# Compaq/iPAQ Drivers
+#
+
+#
+# Compaq/HP iPAQ Drivers
+#
+# CONFIG_IPAQ_HAMCOP is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+CONFIG_PM_DEBUG=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+# CONFIG_IRLAN is not set
+# CONFIG_IRNET is not set
+# CONFIG_IRCOMM is not set
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=y
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+CONFIG_PXA_FICP=y
+CONFIG_BT=y
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_SCO is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUART=y
+# CONFIG_BT_HCIUART_H4 is not set
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+# CONFIG_IEEE80211_CRYPT_WEP is not set
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+CONFIG_IEEE80211_SOFTMAC=y
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_PALMIR is not set
+CONFIG_KEYBOARD_PALMWK=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_PXA_COUNT=4
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# L3 serial bus support
+#
+# CONFIG_L3 is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_SA1100_RTC=m
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# SoC drivers
+#
+# CONFIG_SOC_MQ11XX is not set
+# CONFIG_SOC_T7L66XB is not set
+# CONFIG_SOC_TC6387XB is not set
+# CONFIG_SOC_TC6393XB is not set
+# CONFIG_HTC_ASIC2 is not set
+# CONFIG_HTC_ASIC3 is not set
+
+#
+# Misc devices
+#
+CONFIG_BATTERY_MONITOR=y
+# CONFIG_BATTCHARGE_MONITOR is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_PALMZ72=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+CONFIG_VIDEO_ADV_DEBUG=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+
+#
+# Encoders and Decoders
+#
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_IMAGEON is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PXAPWM=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2xx_I2SOUND is not set
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA27X_DMA is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_MQ11XX is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_CHAR is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_TMIO is not set
+# CONFIG_MMC_SAMCOP is not set
+# CONFIG_MMC_ASIC3 is not set
+# CONFIG_MMC_WBSD_PALMT3 is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=m
+CONFIG_RTC_INTF_PROC=m
+CONFIG_RTC_INTF_DEV=m
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_UNION_FS=m
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_KOI8_R=y
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_SMALLOOPS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
HOMEPAGE = "http://www.hackndev.com/"
SECTION = "kernel"
LICENSE = "GPL"
+PR = "r1"
-COMPATIBLE_MACHINE = "(palmtx|palmld)"
+COMPATIBLE_MACHINE = "(palmtx|palmld|palmz72)"
SRC_URI = "svn://svn.sourceforge.net/svnroot/hackndev/linux4palm/linux;module=trunk;proto=https \
file://defconfig"
cd -
fi
}
+
+do_deploy() {
+ install -d ${DEPLOY_DIR_IMAGE}
+ install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}
+}
+
+do_deploy[dirs] = "${S}"
+
+addtask deploy before do_build after do_compile
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-hh7
-# Sun Dec 31 02:28:00 2006
+# Linux kernel version: 2.6.19-hh8
+# Mon Jan 22 05:03:33 2007
#
CONFIG_ARM=y
# CONFIG_GENERIC_TIME is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
-# CONFIG_MINIMAL_OOPS is not set
CONFIG_IKCONFIG_PROC=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_USELIB=y
-CONFIG_CORE_DUMP=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
CONFIG_IPAQ_H3900_LCD=y
CONFIG_IPAQ_H3900_BACKLIGHT=y
CONFIG_IPAQ_H3900_BATTERY=y
-# CONFIG_IPAQ_H3900_MMC is not set
# CONFIG_MACH_H4000 is not set
# CONFIG_MACH_H4700 is not set
# CONFIG_MACH_HX2750 is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA25x=y
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
#
# Linux As Bootloader
#
# CONFIG_LAB is not set
+CONFIG_PXA_IPAQ=y
+
+#
+# XScale-based iPAQ
+#
+CONFIG_IPAQ_HANDHELD=y
#
# Processor Type
CONFIG_KEXEC=y
#
-# Compaq/iPAQ Platforms
-#
-CONFIG_PXA_IPAQ=y
-
-#
-# XScale-based iPAQ
-#
-CONFIG_IPAQ_HANDHELD=y
-
-#
# Compaq/iPAQ Drivers
#
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
#
# I2C support
#
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCA9535 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
#
# USB support
#
# RTC drivers
#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_SA1100=y
# CONFIG_RTC_DRV_TEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-hh0
-# Sat Nov 18 21:26:56 2006
+# Linux kernel version: 2.6.19-hh8
+# Mon Jan 22 05:03:36 2007
#
CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
-# CONFIG_MINIMAL_OOPS is not set
CONFIG_IKCONFIG_PROC=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_USELIB=y
-CONFIG_CORE_DUMP=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
#
# Block layer
#
+CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_TOSHIBA_TMIO_OHCI is not set
# CONFIG_ARCH_ESERIES is not set
# CONFIG_MACH_A620 is not set
# CONFIG_MACH_A716 is not set
# CONFIG_ARCH_H2200 is not set
# CONFIG_MACH_H3900 is not set
CONFIG_MACH_H4000=y
-CONFIG_IPAQ_H4000_SERIAL=m
+# CONFIG_IPAQ_H4000_SERIAL is not set
CONFIG_IPAQ_H4000_UDC=y
CONFIG_IPAQ_H4000_LCD=y
CONFIG_IPAQ_H4000_BACKLIGHT=y
CONFIG_IPAQ_H4000_TS=y
-CONFIG_IPAQ_H4000_PCMCIA=y
CONFIG_IPAQ_H4000_BUTTONS=y
CONFIG_IPAQ_H4000_BATT=y
+CONFIG_IPAQ_H4000_LEDS=y
+CONFIG_IPAQ_H4000_BT=y
CONFIG_IPAQ_H4300_KBD=m
# CONFIG_MACH_H4700 is not set
# CONFIG_MACH_HX2750 is not set
# CONFIG_MACH_XSCALE_PALMLD is not set
# CONFIG_MACH_T3XSCALE is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA25x=y
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
+CONFIG_PXA_SSP=y
#
# Linux As Bootloader
#
# CONFIG_LAB is not set
+CONFIG_PXA_IPAQ=y
+
+#
+# XScale-based iPAQ
+#
+CONFIG_IPAQ_HANDHELD=y
#
# Processor Type
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_XSCALE_PMU=y
CONFIG_KEXEC=y
#
-# Compaq/iPAQ Platforms
-#
-CONFIG_PXA_IPAQ=y
-
-#
-# XScale-based iPAQ
-#
-CONFIG_IPAQ_HANDHELD=y
-
-#
# Compaq/iPAQ Drivers
#
# Compaq/HP iPAQ Drivers
#
# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_IPAQ_SAMCOP is not set
-# CONFIG_IPAQ_HAMCOP is not set
#
# Bus support
#
# PC-card bridges
#
-CONFIG_PCMCIA_PXA2XX=y
+# CONFIG_PCMCIA_PXA2XX is not set
#
# Kernel Features
# CONFIG_PREEMPT is not set
CONFIG_NO_IDLE_HZ=y
CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
#
# CPU Frequency scaling
#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_PXA=y
-CONFIG_PXA25x_ALTERNATE_FREQS=y
+# CONFIG_CPU_FREQ is not set
#
# Floating point emulation
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
+# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
+CONFIG_PM_SYSFS_DEPRECATED=y
CONFIG_APM=y
#
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
# CONFIG_IP_NF_QUEUE is not set
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
+# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
-CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=y
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-CONFIG_PXA_FICP=y
-CONFIG_BT=y
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
-CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
# Memory Technology Devices (MTD)
#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-CONFIG_MTD_XIP=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IPAQ is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_DISKONCHIP=y
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD is not set
#
# Parallel port support
# Block devices
#
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=6
+CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
#
# ATA/ATAPI/MFM/RLL support
#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# Network device support
#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_ACX=y
-CONFIG_ACX_MEM=y
-# CONFIG_ACX_H4000 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
+# CONFIG_NETDEVICES is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
+# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_GPIO_KEYS=y
CONFIG_KEYBOARD_ASIC3=y
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_NAVPOINT is not set
+# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_LEGACY_PTY_COUNT=32
#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_SA1100_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
+CONFIG_I2C=m
+# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
# I2C Hardware Bus support
#
-# CONFIG_I2C_ELV is not set
-CONFIG_I2C_PXA=y
+CONFIG_I2C_PXA=m
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCA9535 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-CONFIG_SA1100_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
# SPI support
#
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
#
-# SPI Master Controller Drivers
+# Dallas's 1-wire bus
#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_PXA2XX is not set
+# CONFIG_W1 is not set
#
-# SPI Protocol Masters
+# Hardware Monitoring support
#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
#
-# Dallas's 1-wire bus
+# Hardware Monitoring - Battery
#
+# CONFIG_BATTERY_MONITOR is not set
#
-# Hardware Monitoring support
+# L3 serial bus support
#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_L3 is not set
#
# SoC drivers
# CONFIG_SOC_T7L66XB is not set
# CONFIG_SOC_TC6387XB is not set
# CONFIG_SOC_TC6393XB is not set
+# CONFIG_SOC_SAMCOP is not set
+# CONFIG_SOC_HAMCOP is not set
# CONFIG_HTC_ASIC2 is not set
CONFIG_HTC_ASIC3=y
+# CONFIG_HTC_ASIC3_DS1WM is not set
# CONFIG_SOC_TSC2101 is not set
+# CONFIG_SOC_TSC2200 is not set
#
# Misc devices
#
-CONFIG_BATTERY_MONITOR=y
#
# Multimedia Capabilities Port drivers
#
# CONFIG_MCP is not set
+CONFIG_ADC_ADS7846_SSP=y
+# CONFIG_TIFM_CORE is not set
#
# LED devices
#
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+CONFIG_LEDS_ASIC3=y
#
# LED Triggers
#
+# CONFIG_LEDS_TRIGGERS is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
-CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_IMAGEON is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
-CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VSFB is not set
#
# Console display driver support
#
# Advanced Linux Sound Architecture
#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_DEBUG_DETECT=y
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# ALSA ARM devices
#
-CONFIG_SND_H4000=y
-# CONFIG_SND_HTCSABLE is not set
-CONFIG_SND_PXA2xx_I2SOUND=y
+CONFIG_SND_H4000=m
+CONFIG_SND_PXA2xx_I2SOUND=m
# CONFIG_SND_PXA2XX_AC97 is not set
#
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-CONFIG_SND_UDA1380=y
+
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+CONFIG_SND_UDA1380=m
#
# Open Sound System
# USB Gadget Support
#
CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_NET2280 is not set
CONFIG_USB_GADGET_PXA2XX=y
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_MQ11XX is not set
# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=y
-# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_CHAR is not set
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_PXA is not set
+# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SAMCOP is not set
CONFIG_MMC_ASIC3=y
# Real Time Clock
#
CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_DEBUG=y
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
#
# Kernel hacking
#
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=15
+CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-hh4
-# Sat Dec 16 17:40:31 2006
+# Linux kernel version: 2.6.19-hh8
+# Mon Jan 22 13:41:47 2007
#
CONFIG_ARM=y
# CONFIG_GENERIC_TIME is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
-# CONFIG_MINIMAL_OOPS is not set
CONFIG_IKCONFIG_PROC=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
+CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_USELIB=y
-CONFIG_CORE_DUMP=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
#
# S3C24XX Implementations
CONFIG_MACH_RX3715=y
CONFIG_RX3715_LEDS=m
CONFIG_RX3715_BLUETOOTH=m
-CONFIG_RX3715_DS1WM=m
+# CONFIG_MACH_HTCHERMES is not set
+# CONFIG_MACH_HTC_TRINITY is not set
# CONFIG_MACH_OTOM is not set
# CONFIG_MACH_NEXCODER_2440 is not set
# CONFIG_MACH_VSTMS is not set
+# CONFIG_MACH_G500 is not set
CONFIG_S3C2410_CLOCK=y
CONFIG_S3C2410_PM=y
CONFIG_CPU_S3C244X=y
# CONFIG_KEXEC is not set
#
-# Compaq/iPAQ Platforms
-#
-
-#
# Compaq/iPAQ Drivers
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=200
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
+# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_GPIO_KEYS=y
CONFIG_KEYBOARD_ASIC3=y
+# CONFIG_S3C2410_BUTTONS is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_S3C2410=y
-# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_S3C2410=y
+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
+# CONFIG_TOUCHSCREEN_S3C2410_ALT is not set
# CONFIG_INPUT_MISC is not set
#
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# I2C Hardware Bus support
#
-# CONFIG_I2C_ELV is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_S3C2410=m
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCA9535 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SOC_HAMCOP is not set
# CONFIG_HTC_ASIC2 is not set
CONFIG_HTC_ASIC3=y
+CONFIG_HTC_ASIC3_DS1WM=y
# CONFIG_SOC_TSC2101 is not set
# CONFIG_SOC_TSC2200 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_MQ11XX is not set
# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
CONFIG_USB_GADGET_S3C2410=y
CONFIG_USB_S3C2410=y
# CONFIG_USB_S3C2410_DEBUG is not set
+# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_S3C2440 is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SAMCOP is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_HEADERS_CHECK is not set
SECTION = "kernel"
DESCRIPTION = "handhelds.org Linux kernel 2.6 for PocketPCs and other consumer handheld devices."
LICENSE = "GPL"
-PR = "r0"
+PR = "r1"
DEFAULT_PREFERENCE = "-1"
KERNEL_IMAGETYPE = "vmlinux"
KERNEL_OUTPUT = "${KERNEL_IMAGETYPE}"
+module_autoload_ohci-hcd_omap5912osk = "ohci-hcd"
+
do_configure_prepend() {
if [ "${TARGET_OS}" == "linux-gnueabi" -o "${TARGET_OS}" == "linux-uclibcgnueabi" ]; then
+++ /dev/null
-# Standard definitions for any NSLU2 Linux kernel.
-# Include this file in a .bb which specifies, at least,
-# PN,PV,PR for the desired kernel
-#
-# Define the following *before* including this file as
-# required:
-#
-# N2K_PATCHES - full list of patches to apply, to add files
-# generate a patch against /dev/null
-# N2K_SUFFIX - the suffix to add after 'zImage-' in the
-# deploy/images directory, should identify the image config
-#
-# DEFAULT_PREFERENCE is set automagically in this file as
-# follows:
-#
-# 10 For *released* kernels
-# 8 For mm or ac patched versions of released kernels
-# 6 For rc patched kernels (release candidates)
-# 4 For mm or ac patched rc (release candidate) kernels
-# 2 For pre or bk versions
-# 0 For mm or ac patched pre or bk versions
-#
-# --------------------------------------------------------------
-#
-# Within this file bitbake variables local to the file are
-# named N2K_FOO
-#
-SECTION = "kernel"
-DESCRIPTION = "Linux kernel for the Linksys NSLU2 device"
-LICENSE = "GPL"
-
-DEPENDS += "devio-native"
-
-# Linux kernel source has the general form linux-X.Y.Z-patchP,
-# X.Y is the major version number, Z (which may have multiple
-# parts) is a sub-version and 'patch' is something like 'mm' or
-# 'ac' with a patch version. The original bz2 archive will be
-# in a directory/file vX.Y/linux-X.Y.Z.tar.bz2. The unpacked
-# source will be in the directory linux-X.Y.Z and this directory
-# name corresponds to the module directory (in /lib/modules).
-#
-# The corresponding .bb file should be called:
-#
-# package_X.Y.Z-patchP
-#
-# Giving PN=package PV=X.Y.Z-patchP (and PR is set in the .bb
-# file). Files, including the all important defconfig, are
-# searched for in the following directories (last one first):
-#
-# nslu2-kernel/files
-# nslu2-kernel/X.Y
-# nslu2-kernel/X.Y.Z
-# nslu2-kernel/X.Y.Z-patch
-# nslu2-kernel/X.Y.Z-patchP
-# package-X.Y.Z-patchP
-#
-# This allows sharing of patch files and other useful source!
-# To share a file or patch with an earlier version put it in
-# the shared directory - e.g. to use foo.patch on 2.6.11.2 and
-# 2.6.11.4 it should be in directory nslu2-kernel/2.6.11.
-#
-# Note that when there are multiple patches the X.Y.Z-patch form
-# uses base-patch (e.g. 2.6.12-mm) whereas X.Y.Z-patchP has the
-# full form, for example 2.6.12-rc3-mm1 (in the same case).
-
-#PN=package-name
-#PV=package-version (full)
-
-# The patch has the general form (rcN|preN|acN|mmN|bkN)* with the
-# separate patch items being separated by '-' characters. The
-# rc patch is first and has the important property that it
-# requires the *preceding* kernel base version and that this
-# will be the source directory name.
-python () {
- # The patches list may be empty. This code starts with the base
- # kernel version and steps through the patches. Because the rc and
- # pre patches actually require the *preceding* kernel version the code
- # fixes that up appropriately.
- pv = bb.data.getVar("PV",d,1).split('-')
- kernel = pv[0].split('.')
- base = pv[0]
- name = [base]
- major = '.'.join(name[0].split('.')[0:2])
- minor = '.'.join(name[0].split('.')[0:3])
- patch_uri = [ None ]
- filedir = "${FILE_DIRNAME}/nslu2-kernel/%s"
- # This entry will become the last one (everything is inserted before it)
- filepath = [ filedir % "files" ]
- pref = 10
- mmac = 0
- for patch in pv[1:]:
- name.append(patch)
- pname = '-'.join(name)
- if patch[0:2] == "rc" or patch[0:3] == "pre":
- patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/v%s/testing/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname))
- kernel[-1] = str(int(kernel[-1]) - 1)
- if patch[0:2] == "rc" and pref == 10:
- pref = 6
- filepath[0:0] = [ filedir % name[0] ]
- filepath[0:0] = [ filedir % (name[0] + "-rc") ]
- else:
- pref = 2
- elif patch[0:2] == "bk" or patch[0:3] == "git":
- patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/v%s/snapshots/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname))
- pref = 2
- elif patch[0:2] == "ac":
- patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/people/alan/linux-%s/%s/patch-%s" % (major, base, pname))
- mmac = 2
- filepath[0:0] = [ filedir % (name[0] + "-ac") ]
- elif patch[0:2] == "mm":
- patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/people/akpm/patches/%s/%s/%s/%s.bz2;patch=1;pname=%s" % (major, base, pname, pname, pname))
- mmac = 2
- filepath[0:0] = [ filedir % (name[0] + "-mm") ]
- else:
- raise bb.build.FuncFailed("nslu2-kernel: patch %s not recognized in %s" % (patch, '-'.join(pv)))
- filepath[0:0] = [ filedir % pname ]
- base = pname
-
- base = '.'.join(kernel)
- patch_uri[0] = "${KERNELORG_MIRROR}/pub/linux/kernel/v%s/linux-%s.tar.bz2" % (major, base)
- filepath[-1:-1] = [ filedir % base ]
- if base != minor:
- filepath[-1:-1] = [ filedir % minor ]
- filepath[-1:-1] = [ filedir % major ]
-
- bb.data.setVar("N2K_SRCMAJ", major, d)
- # bb.note("N2K_SRCMAJ := %s" % major)
- bb.data.setVar("N2K_SRCVER", base, d)
- # bb.note("N2K_SRCVER := %s" % base)
- bb.data.setVar("N2K_SRCURI", ' '.join(patch_uri), d)
- # bb.note("N2K_SRCURI := %s" % ' '.join(patch_uri))
- bb.data.setVar("N2K_FILESPATH", ':'.join(filepath), d)
- # bb.note("N2K_FILESPATH := %s" % ' '.join(filepath))
- bb.data.setVar("DEFAULT_PREFERENCE", pref-mmac, d)
- # bb.note("DEFAULT_PREFERENCE := %s" % (pref-mmac))
-}
-
-# FILESPATH: this list is in order last-searched-first, therefore
-# the first entry is the *latest* and/or most specific
-FILESPATH = "${FILE_DIRNAME}/${P}:${N2K_FILESPATH}"
-
-# The working directory will be the 'base' version (which may not be the
-# same as implied by the PV variable because it corresponds to the prior
-# minor version for rc and pre patched versions).
-S = "${WORKDIR}/linux-${N2K_SRCVER}"
-
-# N2K_PATCHES is the list of patches.
-N2K_PATCHES ?= ""
-
-# Image suffix - actually set in conf/machine/nslu2.conf as it is also
-# used by anything which needs to know the name of the generated image.
-# Should be overridden in the distro if patches or defconfig are changed.
-N2K_SUFFIX ?= "nslu2${ARCH_BYTE_SEX}"
-
-SRC_URI = "${N2K_SRCURI}"
-SRC_URI += "${N2K_PATCHES}"
-SRC_URI += "file://defconfig"
-
-COMPATIBLE_HOST = 'arm.*-linux'
-
-inherit kernel
-
-ARCH = "arm"
-KERNEL_IMAGETYPE = "zImage"
-# To specify the console set KERNEL_CONSOLE in the .bb file.
-# CMDLINE_ROOT contains the boot options, CMDLINE_KERNEL_OPTIONS
-# contains the things for a specific kernel.
-CMDLINE_KERNEL_OPTIONS ?= "reboot=s"
-CMDLINE_ROOT ?= "root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc"
-# Add distro specific debug (or non-debug) options to this
-CMDLINE_DEBUG ?= ""
-CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_KERNEL_OPTIONS} ${CMDLINE_DEBUG} ${CMDLINE_CONSOLE}"
-
-# Set EXTRAVERSION and LOCALVERSION to "" so that the kernel version
-# remains pinned to the x.y.z form, also turn off the directory
-# printing which provides almost all the output of an incremental build.
-EXTRA_OEMAKE += "EXTRAVERSION="
-EXTRA_OEMAKE += "LOCALVERSION="
-EXTRA_OEMAKE += "MAKEFLAGS='--no-print-directory'"
-
-addtask unpacklocal before do_patch after do_unpack
-
-# NOTE: in MM kernel builds the config options (oldconfig, menuconfig
-# and so on) do not allow an option to be overridden, so the following
-# removes the options which must be changed.
-do_configure_prepend() {
- rm -f ${S}/.config
- echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >>'${S}/.config'
- if test '${ARCH_BYTE_SEX}' = be
- then
- echo 'CONFIG_CPU_BIG_ENDIAN=y' >>'${S}/.config'
- fi
- if test '${SLUGOS_IMAGESEX}' = big-endian
- then
- echo 'CONFIG_JFFS2_BIG_ENDIAN=y' >>'${S}/.config'
- fi
- if test '${SLUGOS_IMAGESEX}' = little-endian
- then
- echo 'CONFIG_JFFS2_LITTLE_ENDIAN=y' >>'${S}/.config'
- fi
- sed -e '/CONFIG_CPU_BIG_ENDIAN/d' -e '/CONFIG_CMDLINE=/d' \
- -e '/CONFIG_JFFS2_NATIVE_ENDIAN=/d' \
- -e '/CONFIG_JFFS2_BIG_ENDIAN=/d' \
- -e '/CONFIG_JFFS2_LITTLE_ENDIAN=/d' \
- '${WORKDIR}/defconfig' >>'${S}/.config'
- rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \
- ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch
-}
-
-# This function adds the required prefix to the image to deal with two
-# problems:
-#
-# 1) The machine type set by RedBoot is wrong - the type for an ixdp425, not an NSLU2
-# e3a01c02 e3811055
-# 2) For LE kernels it is necessary to prefix change-to-le code to the kernel image:
-# ee110f10 e3c00080 ee010f10
-# and to byte swap the (LE) image to match the BE flash layout
-#
-# The argument to the function is the destination directory
-redboot_fixup_armeb() {
- rm -f "$1".new
- devio '<<arch/${ARCH}/boot/${KERNEL_IMAGETYPE}' >"$1".new \
- 'wb 0xe3a01c02,4' \
- 'wb 0xe3811055,4' \
- 'cp$'
- mv "$1".new "$1"
-}
-
-redboot_fixup_arm() {
- rm -f "$1".new
- devio '<<arch/${ARCH}/boot/${KERNEL_IMAGETYPE}' >"$1".new \
- 'wb 0xe3a01c02,4' \
- 'wb 0xe3811055,4' \
- 'wb 0xee110f10,4' \
- 'wb 0xe3c00080,4' \
- 'wb 0xee010f10,4' \
- 'xp $,4' || {
- echo 'ERROR: arch/${ARCH}/boot/${KERNEL_IMAGETYPE}: failed to byteswap zImage' >&2
- return 1
- }
- mv "$1".new "$1"
-}
-
-do_install_append() {
- redboot_fixup '${STAGING_KERNEL_DIR}/${KERNEL_IMAGETYPE}'
-}
-
-do_deploy[dirs] = "${S}"
-do_deploy() {
- install -d ${DEPLOY_DIR_IMAGE}
- redboot_fixup '${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${N2K_SUFFIX}'
-}
-
-addtask deploy before do_build after do_compile
-
-COMPATIBLE_MACHINE = "nslu2"
+++ /dev/null
---- linux-2.6.11/arch/arm/kernel/setup.c.orig Mon Mar 7 09:41:40 2005
-+++ linux-2.6.11/arch/arm/kernel/setup.c Mon Mar 7 09:42:15 2005
-@@ -431,8 +431,10 @@
- rd_prompt = prompt;
- rd_doload = doload;
-
-+#if 0 /* rd_size is not exported by 2.6.11-mm1 */
- if (rd_sz)
- rd_size = rd_sz;
-+#endif
- #endif
- }
-
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-mm4
-# Sat May 7 11:48:09 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_ARCH_NSLU2=y
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-CONFIG_DMABOUNCE=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMB_INTERWORK is not set
-# CONFIG_ARCH_XSCALE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-
-#
-# General setup
-#
-CONFIG_PCI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# At least one math emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_PM is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc console=ttyS0,115200n8"
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_KGDBOE is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_ISCSI_IF is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_IOP3XX is not set
-# CONFIG_I2C_ISA is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISER4_FS=m
-# CONFIG_REISER4_DEBUG is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# Misc devices
-#
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/disk_format/disk_format40.c 2005-03-27 21:36:10.656270448 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/disk_format/disk_format40.c 2005-03-27 23:39:18.967076480 -0800
-@@ -467,19 +467,15 @@
- return 0;
- }
-
--#define FORMAT40_ROOT_LOCALITY 41
--#define FORMAT40_ROOT_OBJECTID 42
-+#define FORMAT40_ROOT_LOCALITY 41ull
-+#define FORMAT40_ROOT_OBJECTID 42ull
-
- /* plugin->u.format.root_dir_key */
- reiser4_internal const reiser4_key *
- root_dir_key_format40(const struct super_block *super UNUSED_ARG)
- {
- static const reiser4_key FORMAT40_ROOT_DIR_KEY = {
-- .el = {{(FORMAT40_ROOT_LOCALITY << 4) | KEY_SD_MINOR},
--#if REISER4_LARGE_KEY
-- {0ull},
--#endif
-- {FORMAT40_ROOT_OBJECTID}, {0ull}}
-+ .el = { KEY_INIT(KEY_SD_MINOR,FORMAT40_ROOT_LOCALITY,0ull,0,FORMAT40_ROOT_OBJECTID,0ull) }
- };
-
- return &FORMAT40_ROOT_DIR_KEY;
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/disk_format/disk_format40.h 2005-03-27 21:24:00.618253096 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/disk_format/disk_format40.h 2005-03-27 21:24:02.747929336 -0800
-@@ -49,7 +49,7 @@
- /* 70 */ d16 formatting_policy;
- /* 72 */ d64 flags;
- /* 72 */ char not_used[432];
--} format40_disk_super_block;
-+} PACKED64 format40_disk_super_block;
-
- /* format 40 specific part of reiser4_super_info_data */
- typedef struct format40_super_info {
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/file/invert.c 2005-03-27 21:24:00.625252032 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/file/invert.c 2005-03-27 21:24:02.747929336 -0800
-@@ -240,14 +240,14 @@
- typedef struct flow_header {
- d32 fl_magic;
- d16 fl_nr; /* number of subfiles in the flow */
--};
-+} PACKED32;
-
- typedef struct subfile_header {
- d32 sh_magic; /* subfile magic */
- d16 sh_type; /* type of subfile: light-weight, ordinary, invert */
- d16 sh_arg_len; /* lenght of lookup argument (filename, key) */
- d32 sh_body_len; /* lenght of subfile body */
--};
-+} PACKED32;
-
- /* functions to get/set fields of flow header */
-
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/static_stat.c 2005-03-27 21:24:00.648248536 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/static_stat.c 2005-03-27 21:34:27.331978128 -0800
-@@ -19,6 +19,38 @@
-
- /* see static_stat.h for explanation */
-
-+/* compile time verify of the data structure sizes and alignments */
-+static inline void
-+r4static_stat_verify(void)
-+{
-+ /* All these structures are PACKED, so the __alignof__ should
-+ * be 1. The sizes need to be correct as they map to disk
-+ * structures.
-+ */
-+ cassert(sizeof (reiser4_stat_data_base) == 2);
-+ /* cassert(sizeof (reiser4_light_weight_stat) == 16);
-+ * 14 bytes, comments in code do not take into account PACKED!
-+ */
-+ cassert(sizeof (reiser4_light_weight_stat) == 14);
-+ cassert(sizeof (reiser4_unix_stat) == 28);
-+ cassert(sizeof (reiser4_symlink_stat) == 0);
-+ cassert(sizeof (reiser4_plugin_slot) == 4);
-+ cassert(sizeof (reiser4_plugin_stat) == 2);
-+ cassert(sizeof (reiser4_flags_stat) == 4);
-+ /* cassert(sizeof (reiser4_capabilities_stat) == 16);
-+ * comments in the file look wrong - capabilities are 2 x d32
-+ * not 2 x d64 in the declaration.
-+ */
-+ cassert(sizeof (reiser4_capabilities_stat) == 8);
-+ cassert(sizeof (reiser4_cluster_stat) == 1);
-+ cassert(sizeof (reiser4_crypto_stat) == 2);
-+ /* cassert(sizeof (reiser4_large_times_stat) == 24);
-+ * should be 12 bytes - 3 x d32, probably a bug in the def in
-+ * the header file (meant to be 3 x d64?)
-+ */
-+ cassert(sizeof (reiser4_large_times_stat) == 12);
-+}
-+
- /* helper function used while we are dumping/loading inode/plugin state
- to/from the stat-data. */
-
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/acl.h 2005-03-27 21:24:00.629251424 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/acl.h 2005-03-27 21:24:02.749929032 -0800
-@@ -26,7 +26,7 @@
- obj_key_id id;
- /* file name. Null terminated string. */
- d8 name[0];
--} directory_entry_format;
-+} PACKEDt(obj_key_id) directory_entry_format;
-
- void print_de(const char *prefix, coord_t * coord);
- int extract_key_de(const coord_t * coord, reiser4_key * key);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/cde.h 2005-03-27 21:24:00.632250968 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/cde.h 2005-03-27 21:24:02.750928880 -0800
-@@ -15,12 +15,12 @@
- typedef struct cde_unit_header {
- de_id hash;
- d16 offset;
--} cde_unit_header;
-+} PACKEDt2(de_id,d16) cde_unit_header;
-
- typedef struct cde_item_format {
- d16 num_of_entries;
- cde_unit_header entry[0];
--} cde_item_format;
-+} PACKEDt2(d16,cde_unit_header) cde_item_format;
-
- typedef struct cde_entry {
- const struct inode *dir;
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/extent.h 2005-03-27 21:32:13.758284416 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/extent.h 2005-03-27 21:32:30.786695704 -0800
-@@ -7,7 +7,7 @@
- typedef struct {
- reiser4_dblock_nr start;
- reiser4_dblock_nr width;
--} reiser4_extent;
-+} PACKED64 reiser4_extent;
-
- typedef struct extent_stat {
- int unallocated_units;
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/internal.h 2005-03-27 21:33:08.971890672 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/internal.h 2005-03-27 22:15:43.290575208 -0800
-@@ -13,7 +13,7 @@
- typedef struct internal_item_layout {
- /* 0 */ reiser4_dblock_nr pointer;
- /* 4 */
--} internal_item_layout;
-+} PACKED64 internal_item_layout;
-
- struct cut_list;
-
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/sde.h 2005-03-27 21:24:00.646248840 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/item/sde.h 2005-03-27 21:24:02.750928880 -0800
-@@ -26,7 +26,7 @@
- obj_key_id id;
- /* file name. Null terminated string. */
- d8 name[0];
--} directory_entry_format;
-+} PACKEDt(obj_key_id) directory_entry_format;
-
- void print_de(const char *prefix, coord_t * coord);
- int extract_key_de(const coord_t * coord, reiser4_key * key);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/node/node40.c 2005-03-27 21:24:00.654247624 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/node/node40.c 2005-03-27 21:35:08.677692624 -0800
-@@ -32,6 +32,22 @@
- magic (32)
- flush_time (32)
- */
-+/* compile time verify of the data structure sizes and alignments */
-+static inline void
-+r4node40_stat_verify(void)
-+{
-+ /* The alignment of these structures is intended to be '1', but
-+ * it doesn't matter so long as the size is right.
-+ */
-+ cassert(sizeof (common_node_header) == 2);
-+ cassert(sizeof (node40_header) == 28);
-+#if REISER4_LARGE_KEY
-+ cassert(sizeof (item_header40) == 38);
-+#else
-+ cassert(sizeof (item_header40) == 30);
-+#endif
-+}
-+
- /* NIKITA-FIXME-HANS: I told you guys not less than 10 times to not call it r4fs. Change to "ReIs". */
- /* magic number that is stored in ->magic field of node header */
- static const __u32 REISER4_NODE_MAGIC = 0x52344653; /* (*(__u32 *)"R4FS"); */
---- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/node/node.h 2005-03-27 21:24:00.656247320 -0800
-+++ linux-2.6.11/fs/reiser4/plugin/node/node.h 2005-03-27 21:24:02.753928424 -0800
-@@ -250,7 +250,7 @@
- /* identifier of node plugin. Must be located at the very beginning
- of a node. */
- d16 plugin_id;
--} common_node_header;
-+} PACKED16 common_node_header;
-
- /* __REISER4_NODE_H__ */
- #endif
---- linux-2.6.11/.pc/reiser4/fs/reiser4/debug.c 2005-03-27 21:24:00.563261456 -0800
-+++ linux-2.6.11/fs/reiser4/debug.c 2005-03-27 23:27:58.569512632 -0800
-@@ -75,6 +75,72 @@
- va_list args;
-
- /*
-+ * this is here to make sure that we don't compile code which we
-+ * know a-priori will panic, or fail without panicing, since this
-+ * compiles first if you find a duplicate case label error then
-+ * you need to rewrite this code to match your compiler.
-+ */
-+ cassert(sizeof (d8) == 1);
-+ cassert(__alignof__ (d8) == 1);
-+ {
-+ struct {
-+ __u8 pad;
-+ d8 data;
-+ } PACKED8 test;
-+ cassert(sizeof test == 2);
-+ cassert(sizeof test.data == 1);
-+ cassert(__alignof__ test.data == 1);
-+ cassert(__alignof__ test == 1);
-+ }
-+ cassert(sizeof (d16) == 2);
-+ cassert(__alignof__ (d16) == 2);
-+ {
-+ struct {
-+ __u8 pad;
-+ d16 data;
-+ } PACKED16 test;
-+ cassert(sizeof test == 4);
-+ cassert(sizeof test.data == 2);
-+#if !__arm__
-+ cassert(__alignof__ test.data == 2);
-+#endif
-+ cassert(__alignof__ test == 2);
-+#if !__arm__
-+ cassert(test.data.datum - &test.pad == 2);
-+#endif
-+ }
-+ cassert(sizeof (d32) == 4);
-+ cassert(__alignof__ (d32) == 4);
-+ {
-+ struct {
-+ __u8 pad;
-+ d32 data;
-+ } PACKED32 test;
-+ cassert(sizeof test == 8);
-+ cassert(sizeof test.data == 4);
-+ cassert(__alignof__ test.data == 4);
-+ cassert(__alignof__ test == 4);
-+ cassert(test.data.datum - &test.pad == 4);
-+ }
-+ cassert(sizeof (d64) == 8);
-+ cassert(__alignof__ (d64) == 8);
-+ {
-+ struct {
-+ __u8 pad;
-+ d64 data;
-+ } PACKED64 test;
-+ cassert(sizeof test == 16);
-+ cassert(sizeof test.data == 8);
-+ cassert(__alignof__ test.data == 8);
-+ cassert(__alignof__ test == 8);
-+ cassert(test.data.datum - &test.pad == 8);
-+ }
-+
-+ /* This is just a test of a struct with a single d64 element. */
-+ cassert(sizeof (reiser4_dblock_nr) == 8);
-+ cassert(__alignof__(reiser4_dblock_nr) == 8);
-+
-+ /*
- * check for recursive panic.
- */
- if (in_panic == 0) {
---- linux-2.6.11/.pc/reiser4/fs/reiser4/flush_queue.c 2005-03-27 21:24:00.577259328 -0800
-+++ linux-2.6.11/fs/reiser4/flush_queue.c 2005-03-27 21:24:02.755928120 -0800
-@@ -447,7 +447,7 @@
-
- /* If all write requests registered in this "fq" are done we up
- * the semaphore. */
-- if (atomic_sub_and_test(bio->bi_vcnt, &fq->nr_submitted))
-+ if (atomic_sub_return(bio->bi_vcnt, &fq->nr_submitted) == 0)
- up(&fq->io_sem);
- }
-
---- linux-2.6.11/.pc/reiser4/fs/reiser4/key.c 2005-03-27 22:42:43.481268784 -0800
-+++ linux-2.6.11/fs/reiser4/key.c 2005-03-27 23:42:53.958392832 -0800
-@@ -13,10 +13,10 @@
- independent of key scheme. */
- static const reiser4_key MINIMAL_KEY = {
- .el = {
-- {0ull},
-- ON_LARGE_KEY({0ull},)
-- {0ull},
-- {0ull}
-+ {{0,0,0,0,0,0,0,0}},
-+ ON_LARGE_KEY({{0,0,0,0,0,0,0,0}},)
-+ {{0,0,0,0,0,0,0,0}},
-+ {{0,0,0,0,0,0,0,0}}
- }
- };
-
-@@ -24,10 +24,10 @@
- independent of key scheme. */
- static const reiser4_key MAXIMAL_KEY = {
- .el = {
-- {~0ull},
-- ON_LARGE_KEY({~0ull},)
-- {~0ull},
-- {~0ull}
-+ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},
-+ ON_LARGE_KEY({{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},)
-+ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},
-+ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}}
- }
- };
-
---- linux-2.6.11/.pc/reiser4/fs/reiser4/safe_link.c 2005-03-27 21:24:00.677244128 -0800
-+++ linux-2.6.11/fs/reiser4/safe_link.c 2005-03-27 21:24:02.756927968 -0800
-@@ -61,7 +61,7 @@
- reiser4_key sdkey; /* key of stat-data for the file safe-link is
- * for */
- d64 size; /* size to which file should be truncated */
--} safelink_t;
-+} PACKEDt2(reiser4_key, d64) safelink_t;
-
- /*
- * locality where safe-link items are stored. Next to the objectid of root
---- linux-2.6.11/.pc/reiser4/fs/reiser4/status_flags.c 2005-03-27 21:24:00.682243368 -0800
-+++ linux-2.6.11/fs/reiser4/status_flags.c 2005-03-27 21:24:02.756927968 -0800
-@@ -153,6 +153,7 @@
- &statuspage->stacktrace[no])
-
- GETFRAME(0);
-+#ifndef __arm__
- GETFRAME(1);
- GETFRAME(2);
- GETFRAME(3);
-@@ -162,6 +163,7 @@
- GETFRAME(7);
- GETFRAME(8);
- GETFRAME(9);
-+#endif
-
- #undef GETFRAME
- #endif
---- linux-2.6.11/.pc/reiser4/fs/reiser4/dformat.h 2005-03-27 21:24:00.564261304 -0800
-+++ linux-2.6.11/fs/reiser4/dformat.h 2005-03-27 23:29:03.223683704 -0800
-@@ -28,43 +28,84 @@
-
- /* code on-disk data-types as structs with a single field
- to rely on compiler type-checking. Like include/asm-i386/page.h */
-+/* This code did not work on the arm with gcc 3.4.3 because the
-+ * arm has a minimum structure size of 4 - packed is necessary to
-+ * allow these types to be smaller than 4 - and because this version
-+ * of gcc 'loses' the alignment if the structure contains just one
-+ * element of alignment 8 (or probably any value greater than 4).
-+ * To fix this and to make the code much more portable all the basic
-+ * types are now just done as arrays of bytes - __u8.
-+ *
-+ * This is highly tricky, however the check code in debug.c should
-+ * fire a compile time assert if it goes wrong.
-+ */
-+#if __arm__
-+#define PACKED8 __attribute__ ((packed,aligned(1)))
-+/* Warning: the presence of the packed attribute here means that any
-+ * d16 in a structure so marked will lose its alignment. That doesn't
-+ * seem to matter because there don't seem to be any d16's with odd
-+ * structure offsets, but it might.
-+ */
-+#define PACKED16 __attribute__ ((packed,aligned(2)))
-+#define PACKED32 __attribute__ ((aligned(4)))
-+#define PACKED64 __attribute__ ((aligned(8)))
-+#else
-+#define PACKED8 __attribute__ ((aligned(1)))
-+#define PACKED16 __attribute__ ((aligned(2)))
-+#define PACKED32 __attribute__ ((aligned(4)))
-+#define PACKED64 __attribute__ ((aligned(8)))
-+#endif
- typedef struct d8 {
-- __u8 datum;
--} d8 __attribute__ ((aligned(1)));
-+ __u8 datum[1];
-+} PACKED8 d8;
- typedef struct d16 {
-- __u16 datum;
--} d16 __attribute__ ((aligned(2)));
-+ __u8 datum[2];
-+} PACKED16 d16;
- typedef struct d32 {
-- __u32 datum;
--} d32 __attribute__ ((aligned(4)));
-+ __u8 datum[4];
-+} PACKED32 d32;
- typedef struct d64 {
-- __u64 datum;
--} d64 __attribute__ ((aligned(8)));
-+ __u8 datum[8];
-+} PACKED64 d64;
-
-+#define PACKEDt(t) __attribute__ ((packed,aligned(__alignof__ (t)) ))
-+#define PACKEDt2(t1,t2) __attribute__ ((packed,aligned(\
-+ __alignof__ (t1) < __alignof__ (t2) ? __alignof__ (t2) : __alignof__ (t1) )))
- #define PACKED __attribute__((packed))
-
- static inline __u8
- d8tocpu(const d8 * ondisk /* on-disk value to convert */ )
- {
-- return ondisk->datum;
-+ return ondisk->datum[0];
- }
-
- static inline __u16
- d16tocpu(const d16 * ondisk /* on-disk value to convert */ )
- {
-- return __le16_to_cpu(get_unaligned(&ondisk->datum));
-+ return ondisk->datum[0] + (ondisk->datum[1] << 8);
- }
-
- static inline __u32
- d32tocpu(const d32 * ondisk /* on-disk value to convert */ )
- {
-- return __le32_to_cpu(get_unaligned(&ondisk->datum));
-+ return ondisk->datum[0] +
-+ (ondisk->datum[1] << 8) +
-+ (ondisk->datum[2] << 16) +
-+ (ondisk->datum[3] << 24);
- }
-
- static inline __u64
- d64tocpu(const d64 * ondisk /* on-disk value to convert */ )
- {
-- return __le64_to_cpu(get_unaligned(&ondisk->datum));
-+ __u32 low = ondisk->datum[0] +
-+ (ondisk->datum[1] << 8) +
-+ (ondisk->datum[2] << 16) +
-+ (ondisk->datum[3] << 24);
-+ __u64 high = ondisk->datum[4] +
-+ (ondisk->datum[5] << 8) +
-+ (ondisk->datum[6] << 16) +
-+ (ondisk->datum[7] << 24);
-+ return low + (high << 32);
- }
-
- static inline d8 *
-@@ -72,7 +113,7 @@
- d8 * ondisk /* result */ )
- {
- assert("nikita-1264", oncpu < 0x100);
-- put_unaligned(oncpu, &ondisk->datum);
-+ ondisk->datum[0] = oncpu;
- return ondisk;
- }
-
-@@ -81,7 +122,8 @@
- d16 * ondisk /* result */ )
- {
- assert("nikita-1265", oncpu < 0x10000);
-- put_unaligned(__cpu_to_le16(oncpu), &ondisk->datum);
-+ ondisk->datum[0] = oncpu;
-+ ondisk->datum[1] = oncpu >> 8;
- return ondisk;
- }
-
-@@ -89,15 +131,27 @@
- cputod32(__u32 oncpu /* CPU value to convert */ ,
- d32 * ondisk /* result */ )
- {
-- put_unaligned(__cpu_to_le32(oncpu), &ondisk->datum);
-+ ondisk->datum[0] = oncpu; oncpu >>= 8;
-+ ondisk->datum[1] = oncpu; oncpu >>= 8;
-+ ondisk->datum[2] = oncpu; oncpu >>= 8;
-+ ondisk->datum[3] = oncpu;
- return ondisk;
- }
-
- static inline d64 *
--cputod64(__u64 oncpu /* CPU value to convert */ ,
-+cputod64(__u64 oncpuIn /* CPU value to convert */ ,
- d64 * ondisk /* result */ )
- {
-- put_unaligned(__cpu_to_le64(oncpu), &ondisk->datum);
-+ __u32 oncpu = oncpuIn;
-+ ondisk->datum[0] = oncpu; oncpu >>= 8;
-+ ondisk->datum[1] = oncpu; oncpu >>= 8;
-+ ondisk->datum[2] = oncpu; oncpu >>= 8;
-+ ondisk->datum[3] = oncpu;
-+ oncpu = oncpuIn >> 32;
-+ ondisk->datum[4] = oncpu; oncpu >>= 8;
-+ ondisk->datum[5] = oncpu; oncpu >>= 8;
-+ ondisk->datum[6] = oncpu; oncpu >>= 8;
-+ ondisk->datum[7] = oncpu;
- return ondisk;
- }
-
-@@ -111,7 +165,7 @@
- /* data-type for block number on disk, disk format */
- union reiser4_dblock_nr {
- d64 blk;
--};
-+} PACKED64;
-
- static inline reiser4_block_nr
- dblock_to_cpu(const reiser4_dblock_nr * dblock)
-@@ -148,7 +202,7 @@
- char uuid[16]; /* unique id */
- char label[16]; /* filesystem label */
- d64 diskmap; /* location of the diskmap. 0 if not present */
--} reiser4_master_sb;
-+} PACKED64 reiser4_master_sb;
-
- /* __FS_REISER4_DFORMAT_H__ */
- #endif
---- linux-2.6.11/.pc/reiser4/fs/reiser4/kassign.h 2005-03-27 21:24:00.588257656 -0800
-+++ linux-2.6.11/fs/reiser4/kassign.h 2005-03-27 21:24:02.757927816 -0800
-@@ -46,7 +46,7 @@
- d8 locality[sizeof (__u64)];
- ON_LARGE_KEY(d8 ordering[sizeof (__u64)];)
- d8 objectid[sizeof (__u64)];
--} obj_key_id;
-+} PACKED8 obj_key_id;
-
- /* Information sufficient to uniquely identify directory entry within
- compressed directory item.
-@@ -57,7 +57,7 @@
- ON_LARGE_KEY(d8 ordering[sizeof (__u64)];)
- d8 objectid[sizeof (__u64)];
- d8 offset[sizeof (__u64)];
--} de_id;
-+} PACKED8 de_id;
-
- extern int inode_onwire_size(const struct inode *obj);
- extern char *build_inode_onwire(const struct inode *obj, char *area);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/key.h 2005-03-27 21:24:00.591257200 -0800
-+++ linux-2.6.11/fs/reiser4/key.h 2005-03-27 23:41:07.744539792 -0800
-@@ -106,7 +106,7 @@
- union reiser4_key {
- d64 el[KEY_LAST_INDEX];
- int pad;
--};
-+} PACKED64;
-
- /* bitmasks showing where within reiser4_key particular key is
- stored. */
-@@ -138,6 +138,20 @@
- KEY_ORDERING_SHIFT = 0,
- } reiser4_key_field_shift;
-
-+/* initialise a key, this is a compile time constant initialiser expressed as
-+ * three or four (as appropriate) 8 byte initialisers, there are braces around
-+ * each 8 byte quantity but not around the whole initializer.
-+ */
-+#define KEY_INIT(type,loc,order,band,oid,off)\
-+{{ (0xf&(type))+(0xf0&((loc) << 4)), 0xff&((loc) >> 4), 0xff&((loc) >> 12), 0xff&((loc) >> 20),\
-+ 0xff&((loc) >> 28), 0xff&((loc) >> 36), 0xff&((loc) >> 44), 0xff&((loc) >> 52) }},\
-+ON_LARGE_KEY({{ 0xff&(order), 0xff&((order)>>8), 0xff&((order)>>16), 0xff&((order)>>24),\
-+ 0xff&((order)>>32), 0xff&((order)>>40), 0xff&((order)>>48), 0xff&((order)>>56) }},)\
-+{{ 0xff&(oid), 0xff&((oid)>>8), 0xff&((oid)>>16), 0xff&((oid)>>24),\
-+ 0xff&((oid)>>32), 0xff&((oid)>>40), 0xff&((oid)>>48), (0xf&((oid)>>56))+(0xf0&((band)<<4))}},\
-+{{ 0xff&(off), 0xff&((off)>>8), 0xff&((off)>>16), 0xff&((off)>>24),\
-+ 0xff&((off)>>32), 0xff&((off)>>40), 0xff&((off)>>48), 0xff&((off)>>56) }}
-+
- static inline __u64
- get_key_el(const reiser4_key * key, reiser4_key_field_index off)
- {
---- linux-2.6.11/.pc/reiser4/fs/reiser4/status_flags.h 2005-03-27 21:24:00.682243368 -0800
-+++ linux-2.6.11/fs/reiser4/status_flags.h 2005-03-27 21:24:02.758927664 -0800
-@@ -33,7 +33,7 @@
- last sector where io error happened if status is "io error encountered" */
- d64 stacktrace[10]; /* Last ten functional calls made (addresses)*/
- char texterror[REISER4_TEXTERROR_LEN]; /* Any error message if appropriate, otherwise filled with zeroes */
--};
-+} PACKED64;
-
- int reiser4_status_init(reiser4_block_nr block);
- int reiser4_status_query(u64 *status, u64 *extended);
---- linux-2.6.11/.pc/reiser4/fs/reiser4/wander.h 2005-03-27 21:24:00.709239264 -0800
-+++ linux-2.6.11/fs/reiser4/wander.h 2005-03-27 22:14:59.663207576 -0800
-@@ -19,7 +19,7 @@
- struct journal_header {
- /* last written transaction head location */
- d64 last_committed_tx;
--};
-+} PACKED64;
-
- typedef struct journal_location {
- reiser4_block_nr footer;
-@@ -46,7 +46,7 @@
- super block */
- d64 nr_files;
- d64 next_oid;
--};
-+} PACKED64;
-
- /* Each wander record (except the first one) has unified format with wander
- record header followed by an array of log entries */
-@@ -66,7 +66,7 @@
-
- /* number of previous block in commit */
- d64 next_block;
--};
-+} PACKED64;
-
- /* The first wander record (transaction head) of written transaction has the
- special format */
-@@ -98,7 +98,7 @@
- separately from super block */
- d64 nr_files;
- d64 next_oid;
--};
-+} PACKED64;
-
- /* A transaction gets written to disk as a set of wander records (each wander
- record size is fs block) */
-@@ -108,7 +108,7 @@
- struct wander_entry {
- d64 original; /* block original location */
- d64 wandered; /* block wandered location */
--};
-+} PACKED64;
-
- /* REISER4 JOURNAL WRITER FUNCTIONS */
-
+++ /dev/null
---- original/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:12 2005
-+++ linux-2.6.11/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:25 2005
-@@ -139,7 +139,6 @@
- };
-
- static struct i2c_client x1205_i2c_client = {
-- .id = I2C_DRIVERID_X1205,
- .flags = 0,
- .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit
- .adapter = NULL, // the adapter we sit on assigned in attach
-@@ -301,7 +300,6 @@
- int errno;
-
- x1205_i2c_client.adapter = adapter;
-- x1205_i2c_client.id++;
-
- if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver
- return -EIO;
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Sat Jun 18 17:17:09 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_ARCH_NSLU2=y
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMB_INTERWORK is not set
-# CONFIG_ARCH_XSCALE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-# CONFIG_I2C_ISA is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
---- linux-2.6.12.2/drivers/usb/core/hub.c.bak 2005-09-19 20:29:14.000000000 +0000
-+++ linux-2.6.12.2/drivers/usb/core/hub.c 2005-09-19 20:30:44.000000000 +0000
-@@ -1026,6 +1026,19 @@
-
- dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum);
-
-+ // --- Forward-Ported Linksys Disk 1 & Disk 2 LED Control (Port done 16.Sept.05 by Philipp Kirchhofer) ---
-+ // Copy & paste from nslu2-io.c
-+ #define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
-+ #define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
-+ // Copy & Paste end
-+
-+ if (*udev->devpath == 0x31) {
-+ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF;
-+ } else if (*udev->devpath == 0x32) {
-+ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF;
-+ }
-+ // --- End LED Control ---
-+
- /* Free up all the children before we remove this device */
- for (i = 0; i < USB_MAXCHILDREN; i++) {
- if (udev->children[i])
-@@ -2175,6 +2188,19 @@
- udev->bus->controller->driver->name,
- udev->devnum);
-
-+ // --- Start LED Control ---
-+ // Copy & paste from nslu2-io.c
-+ #define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
-+ #define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
-+ // Copy & Paste end
-+
-+ if (*udev->devpath == 0x31) {
-+ *IXP4XX_GPIO_GPOUTR &= DISK1_ON;
-+ } else if (*udev->devpath == 0x32) {
-+ *IXP4XX_GPIO_GPOUTR &= DISK2_ON;
-+ }
-+ // --- End LED Control ---
-+
- /* Set up TT records, if needed */
- if (hdev->tt) {
- udev->tt = hdev->tt;
---- linux-2.6.12.2/drivers/usb/storage/transport.c.bak 2005-09-19 20:29:25.000000000 +0000
-+++ linux-2.6.12.2/drivers/usb/storage/transport.c 2005-09-19 20:29:55.000000000 +0000
-@@ -60,6 +60,60 @@
- #include "scsiglue.h"
- #include "debug.h"
-
-+// --- Forward-Ported Linksys Disk 1 & Disk 2 LED Activity Blinking Part 1 (Port done 16.Sept.05 by Philipp Kirchhofer) ---
-+// Copy & Paste from nslu2-io.c
-+#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
-+#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
-+
-+#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
-+#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
-+// Copy & Paste End
-+
-+#define JIFFIES_BLINKING_TIME 6
-+#define ON_LED_INTERVAL 3
-+unsigned long turn_on_time;
-+
-+static struct timer_list usb1_led_timer; /* ide led switch */
-+static struct timer_list usb2_led_timer; /* ide led switch */
-+
-+// Turns on Disk 1 LED
-+static void turn_on_led_usb1(unsigned long ptr) {
-+ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; // 0xfff7
-+ return;
-+}
-+
-+// Turns on Disk 2 LED
-+static void turn_on_led_usb2(unsigned long ptr) {
-+ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; // 0xfffb
-+ return;
-+}
-+
-+// Turns on Disk 1 LED after ON_LED_INTERVAL jiffies
-+static void usb_1_led_timer(void) {
-+ usb1_led_timer.expires = jiffies + ON_LED_INTERVAL;
-+ add_timer(&usb1_led_timer);
-+ return;
-+}
-+
-+// Turns on Disk 2 LED after ON_LED_INTERVAL jiffies
-+static void usb_2_led_timer(void) {
-+ usb2_led_timer.expires = jiffies + ON_LED_INTERVAL;
-+ add_timer(&usb2_led_timer);
-+ return;
-+}
-+
-+// Initializes Timers
-+unsigned long initialized_timers = 0;
-+static void initializeTimers() {
-+ if (initialized_timers != 1) {
-+ init_timer(&usb1_led_timer);
-+ usb1_led_timer.function = turn_on_led_usb1;
-+ init_timer(&usb2_led_timer);
-+ usb2_led_timer.function = turn_on_led_usb2;
-+ initialized_timers = 1;
-+ }
-+}
-+// --- End Disk LED Activity Blinking Part 1 ---
-
- /***********************************************************************
- * Data transfer routines
-@@ -499,6 +553,21 @@
-
- /* are we scatter-gathering? */
- if (use_sg) {
-+ // --- Disk LED Activity Blinking Part 2 ---
-+ initializeTimers();
-+ if ((jiffies - turn_on_time) >= JIFFIES_BLINKING_TIME) {
-+ if (*us->pusb_dev->devpath == 0x31) {
-+ del_timer_sync(&usb1_led_timer);
-+ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF;
-+ usb_1_led_timer();
-+ } else if (*us->pusb_dev->devpath == 0x32) {
-+ del_timer_sync(&usb2_led_timer);
-+ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF;
-+ usb_2_led_timer();
-+ }
-+ turn_on_time = jiffies;
-+ }
-+ // --- End Disk LED Activity Blinking Part 2 ---
- /* use the usb core scatter-gather primitives */
- result = usb_stor_bulk_transfer_sglist(us, pipe,
- (struct scatterlist *) buf, use_sg,
+++ /dev/null
---- linux-2.6.12/drivers/char/random.c~ 2005-05-14 16:42:24.000000000 -0400
-+++ linux-2.6.12/drivers/char/random.c 2005-05-14 16:42:46.000000000 -0400
-@@ -646,6 +646,7 @@ extern void add_input_randomness(unsigne
- add_timer_randomness(&input_timer_state,
- (type << 4) ^ code ^ (code >> 4) ^ value);
- }
-+EXPORT_SYMBOL_GPL(add_input_randomness);
-
- void add_interrupt_randomness(int irq)
- {
---- linux-2.6.12/lib/kobject_uevent.c~ 2005-05-14 16:45:13.000000000 -0400
-+++ linux-2.6.12/lib/kobject_uevent.c 2005-05-14 16:45:27.000000000 -0400
-@@ -178,6 +178,7 @@ static inline int send_uevent(const char
-
- #ifdef CONFIG_HOTPLUG
- char hotplug_path[HOTPLUG_PATH_LEN] = "/sbin/hotplug";
-+EXPORT_SYMBOL_GPL(hotplug_path);
- u64 hotplug_seqnum;
- static DEFINE_SPINLOCK(sequence_lock);
+++ /dev/null
---- linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:51:27.245788998 -0700
-+++ linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:54:45.041806429 -0700
-@@ -37,6 +37,7 @@
- defined(CONFIG_ARCH_INTEGRATOR) || \
- defined(CONFIG_ARCH_PXA) || \
- defined(CONFIG_ARCH_IXP4XX) || \
-+ defined(CONFIG_ARCH_NSLU2) || \
- defined(CONFIG_ARCH_IXP2000) || \
- defined(CONFIG_ARCH_LH7A40X) || \
- defined(CONFIG_ARCH_OMAP)
---- linux-2.6.11/.pc/2.6.patch/arch/arm/boot/compressed/head-xscale.S 2005-03-01 23:37:52.000000000 -0800
-+++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S 2005-06-17 17:51:32.546985425 -0700
-@@ -47,3 +47,8 @@
- orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
- #endif
-
-+#ifdef CONFIG_ARCH_NSLU2
-+ mov r7, #(MACH_TYPE_NSLU2 & 0xff)
-+ orr r7, r7, #(MACH_TYPE_NSLU2 & 0xff00)
-+#endif
-+
---- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:27.365770810 -0700
-+++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:32.560983303 -0700
-@@ -43,6 +43,12 @@
- IXDP465 Development Platform (Also known as BMP).
- For more information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config ARCH_NSLU2
-+ bool "NSLU2"
-+ help
-+ Say 'Y' here if you want your kernel to support Linksys's
-+ NSLU2 NAS device. For more information on this platform,
-+ see http://www.nslu2-linux.org
-
- #
- # IXCDP1100 is the exact same HW as IXDP425, but with a different machine
---- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Makefile 2005-06-17 17:51:27.365770810 -0700
-+++ linux-2.6.11/arch/arm/mach-ixp4xx/Makefile 2005-06-17 17:51:32.560983303 -0700
-@@ -8,4 +8,4 @@
- obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
--
-+obj-$(CONFIG_ARCH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o
---- linux-2.6.11/.pc/2.6.patch/arch/arm/tools/mach-types 2005-06-17 17:51:27.423762020 -0700
-+++ linux-2.6.11/arch/arm/tools/mach-types 2005-06-17 17:51:32.564982697 -0700
-@@ -604,7 +604,7 @@
- roverp7 MACH_ROVERP7 ROVERP7 594
- pr818s MACH_PR818S PR818S 595
- trxpro MACH_TRXPRO TRXPRO 596
--nslu2 MACH_NSLU2 NSLU2 597
-+nslu2 ARCH_NSLU2 NSLU2 597
- e400 MACH_E400 E400 598
- trab MACH_TRAB TRAB 599
- cmc_pu2 MACH_CMC_PU2 CMC_PU2 600
---- linux-2.6.11/.pc/2.6.patch/drivers/mtd/maps/ixp4xx.c 2005-03-01 23:37:30.000000000 -0800
-+++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-06-17 17:51:32.566982394 -0700
-@@ -94,7 +94,11 @@
- struct resource *res;
- };
-
-+#ifdef CONFIG_ARCH_NSLU2
-+static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL };
-+#else
- static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-+#endif
-
- static int ixp4xx_flash_remove(struct device *_dev)
- {
---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-01 23:37:51.000000000 -0800
-+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h 2005-06-17 17:51:32.567982242 -0700
-@@ -44,5 +44,6 @@
- #include "ixdp425.h"
- #include "coyote.h"
- #include "prpmc1100.h"
-+#include "nslu2.h"
-
- #endif /* _ASM_ARCH_HARDWARE_H */
---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-01 23:38:12.000000000 -0800
-+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h 2005-06-17 17:51:32.568982091 -0700
-@@ -93,4 +93,11 @@
- #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
- #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
-
-+/*
-+ * NSLU2 board IRQs
-+ */
-+#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11
-+#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10
-+#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9
-+
- #endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp4xx/nslu2-setup.c
- *
- * NSLU2 board-setup
- *
- * based ixdp425-setup.c:
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Author: Mark Rakes <mrakes at mac.com>
- * Maintainers: http://www.nslu2-linux.org/
- *
- * Fixed missing init_time in MACHINE_START kas11 10/22/04
- * Changed to conform to new style __init ixdp425 kas11 10/22/04
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-void __init nslu2_map_io(void)
-{
- ixp4xx_map_io();
-}
-
-static struct flash_platform_data nslu2_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-};
-
-static struct resource nslu2_flash_resource = {
- .start = NSLU2_FLASH_BASE,
- .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device nslu2_flash = {
- .name = "IXP4XX-Flash",
- .id = 0,
- .dev = {
- .platform_data = &nslu2_flash_data,
- },
- .num_resources = 1,
- .resource = &nslu2_flash_resource,
-};
-
-static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
- .sda_pin = NSLU2_SDA_PIN,
- .scl_pin = NSLU2_SCL_PIN,
-};
-
-static struct platform_device nslu2_i2c_controller = {
- .name = "IXP4XX-I2C",
- .id = 0,
- .dev = {
- .platform_data = &nslu2_i2c_gpio_pins,
- },
- .num_resources = 0
-};
-
-static struct resource nslu2_uart_resources[] = {
- {
- .start = IXP4XX_UART1_BASE_PHYS,
- .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- {
- .start = IXP4XX_UART2_BASE_PHYS,
- .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- }
-};
-
-static struct plat_serial8250_port nslu2_uart_data[] = {
- {
- .mapbase = IXP4XX_UART1_BASE_PHYS,
- .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
- .irq = IRQ_IXP4XX_UART1,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- {
- .mapbase = IXP4XX_UART2_BASE_PHYS,
- .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
- .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- }
-};
-
-static struct platform_device nslu2_uart = {
- .name = "serial8250",
- .id = 0,
- .dev.platform_data = nslu2_uart_data,
- .num_resources = 2,
- .resource = nslu2_uart_resources
-};
-
-static struct platform_device *nslu2_devices[] __initdata = {
- &nslu2_i2c_controller,
- &nslu2_flash,
- &nslu2_uart
-};
-
-static void n2_power_off(void)
-{
- /* This causes the box to drop the power and go dead. */
-#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000
- *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio
- *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed
-}
-
-static void __init nslu2_init(void)
-{
- ixp4xx_sys_init();
-
- pm_power_off = n2_power_off;
- platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-}
-
-MACHINE_START(NSLU2, "Linksys NSLU2")
- BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
- IXP4XX_PERIPHERAL_BASE_VIRT)
- MAPIO(nslu2_map_io)
- INITIRQ(ixp4xx_init_irq) //FIXME: all irq are off here
- .timer = &ixp4xx_timer,
- // INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed?
- BOOT_PARAMS(0x0100)
- INIT_MACHINE(nslu2_init)
-MACHINE_END
-
+++ /dev/null
---- original/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:12 2005
-+++ linux-2.6.11/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:25 2005
-@@ -139,7 +139,6 @@
- };
-
- static struct i2c_client x1205_i2c_client = {
-- .id = I2C_DRIVERID_X1205,
- .flags = 0,
- .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit
- .adapter = NULL, // the adapter we sit on assigned in attach
-@@ -301,7 +300,6 @@
- int errno;
-
- x1205_i2c_client.adapter = adapter;
-- x1205_i2c_client.id++;
-
- if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver
- return -EIO;
+++ /dev/null
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h.orig 2005-11-07 23:16:48.456117450 -0800
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h 2005-11-07 23:16:58.160728123 -0800
-@@ -8,6 +8,7 @@
- #define __ASM_ARCH_MEMORY_H
-
- #include <asm/sizes.h>
-+#include <asm/page.h>
-
- /*
- * Physical DRAM offset.
+++ /dev/null
---- linux-2.6.14/drivers/i2c/chips/Kconfig.orig 2005-11-07 22:30:30.413306237 -0800
-+++ linux-2.6.14/drivers/i2c/chips/Kconfig 2005-11-07 22:41:15.785916976 -0800
-@@ -126,13 +126,13 @@ config SENSORS_MAX6875
- This driver can also be built as a module. If so, the module
- will be called max6875.
-
--config RTC_X1205_I2C
-- tristate "Xicor X1205 RTC chip"
-- depends on I2C && EXPERIMENTAL
-- help
-- If you say yes here you get support for the Xicor X1205 RTC chip.
-+config SENSORS_X1205
-+ tristate "Xicor X1205 RTC chip"
-+ depends on I2C
-+ help
-+ If you say yes here you get support for the Xicor X1205 RTC chip.
-
-- This driver can also be built as a module. If so, the module
-- will be called x1205.
-+ This driver can also be built as a module. If so, the module
-+ will be called x1205
-
- endmenu
---- linux-2.6.14/drivers/i2c/chips/Makefile.orig 2005-11-07 22:30:30.417306489 -0800
-+++ linux-2.6.14/drivers/i2c/chips/Makefile 2005-11-07 22:41:59.616675071 -0800
-@@ -13,7 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591
- obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o
- obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
- obj-$(CONFIG_TPS65010) += tps65010.o
--obj-$(CONFIG_RTC_X1205_I2C) += x1205.o
-+obj-$(CONFIG_SENSORS_X1205) += x1205.o
-
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
---- linux-2.6.14/drivers/i2c/chips/x1205.c.orig 2005-11-07 22:30:30.421306741 -0800
-+++ linux-2.6.14/drivers/i2c/chips/x1205.c 2005-11-07 22:42:54.960157617 -0800
-@@ -1,14 +1,16 @@
- /*
-- * x1205.c - An i2c driver for the Xicor X1205 RTC
-+ * linux/drivers/i2c/chips/x1205.c
-+ *
-+ * x1205.c - An 12c driver for the Xicor X1205 RTC
- * Copyright 2004 Karen Spearel
- * Copyright 2005 Alessandro Zummo
- *
- * please send all reports to:
- * kas11 at tampabay dot rr dot com
- * a dot zummo at towertech dot it
-- *
-+ *
- * based on the other drivers in this same directory.
-- *
-+ *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
-@@ -26,83 +28,36 @@
-
- #include <linux/x1205.h>
-
--#define DRV_VERSION "0.9.9"
-+#define EPOCH_1900 1900
-+#define EPOCH_1970 1970
-+
-+#define DRIVER_VERSION "0.9.6"
-+#define DRIVER_NAME (x1205_driver.name)
-
--/* Addresses to scan: none. This chip is located at
-- * 0x6f and uses a two bytes register addressing.
-- * Two bytes need to be written to read a single register,
-- * while most other chips just require one and take the second
-- * one as the data to be written. To prevent corrupting
-- * unknown chips, the user must explicitely set the probe parameter.
-- */
-
--static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-+/* Addresses to scan */
-+static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END };
-
- /* Insmod parameters */
- I2C_CLIENT_INSMOD;
- I2C_CLIENT_MODULE_PARM(hctosys,
- "Set the system time from the hardware clock upon initialization");
-
--/* offsets into CCR area */
--
--#define CCR_SEC 0
--#define CCR_MIN 1
--#define CCR_HOUR 2
--#define CCR_MDAY 3
--#define CCR_MONTH 4
--#define CCR_YEAR 5
--#define CCR_WDAY 6
--#define CCR_Y2K 7
--
--#define X1205_REG_SR 0x3F /* status register */
--#define X1205_REG_Y2K 0x37
--#define X1205_REG_DW 0x36
--#define X1205_REG_YR 0x35
--#define X1205_REG_MO 0x34
--#define X1205_REG_DT 0x33
--#define X1205_REG_HR 0x32
--#define X1205_REG_MN 0x31
--#define X1205_REG_SC 0x30
--#define X1205_REG_DTR 0x13
--#define X1205_REG_ATR 0x12
--#define X1205_REG_INT 0x11
--#define X1205_REG_0 0x10
--#define X1205_REG_Y2K1 0x0F
--#define X1205_REG_DWA1 0x0E
--#define X1205_REG_YRA1 0x0D
--#define X1205_REG_MOA1 0x0C
--#define X1205_REG_DTA1 0x0B
--#define X1205_REG_HRA1 0x0A
--#define X1205_REG_MNA1 0x09
--#define X1205_REG_SCA1 0x08
--#define X1205_REG_Y2K0 0x07
--#define X1205_REG_DWA0 0x06
--#define X1205_REG_YRA0 0x05
--#define X1205_REG_MOA0 0x04
--#define X1205_REG_DTA0 0x03
--#define X1205_REG_HRA0 0x02
--#define X1205_REG_MNA0 0x01
--#define X1205_REG_SCA0 0x00
--
--#define X1205_CCR_BASE 0x30 /* Base address of CCR */
--#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
--
--#define X1205_SR_RTCF 0x01 /* Clock failure */
--#define X1205_SR_WEL 0x02 /* Write Enable Latch */
--#define X1205_SR_RWEL 0x04 /* Register Write Enable */
--
--#define X1205_DTR_DTR0 0x01
--#define X1205_DTR_DTR1 0x02
--#define X1205_DTR_DTR2 0x04
--
--#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
--
- /* Prototypes */
-+
- static int x1205_attach(struct i2c_adapter *adapter);
- static int x1205_detach(struct i2c_client *client);
- static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
--static int x1205_command(struct i2c_client *client, unsigned int cmd,
-- void *arg);
-+static int x1205_validate_client(struct i2c_client *client);
-+
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ u8 reg_base);
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ int datetoo, u8 reg_base);
-+static int x1205_validate_tm(struct rtc_time *tm);
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg);
-+static int x1205_hctosys(struct i2c_client *client);
-+
-
- static struct i2c_driver x1205_driver = {
- .owner = THIS_MODULE,
-@@ -110,6 +65,7 @@ static struct i2c_driver x1205_driver =
- .flags = I2C_DF_NOTIFY,
- .attach_adapter = &x1205_attach,
- .detach_client = &x1205_detach,
-+/* .command = &x1205_command,*/
- };
-
- struct x1205_data {
-@@ -118,8 +74,9 @@ struct x1205_data {
- unsigned int epoch;
- };
-
--static const unsigned char days_in_mo[] =
-- { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-+
-+static const unsigned char days_in_mo[] =
-+{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
- static LIST_HEAD(x1205_clients);
-
-@@ -127,6 +84,7 @@ static LIST_HEAD(x1205_clients);
- * commands to a specific client. This function will send the command
- * to the first client.
- */
-+
- int x1205_do_command(unsigned int cmd, void *arg)
- {
- struct list_head *walk;
-@@ -141,114 +99,98 @@ int x1205_do_command(unsigned int cmd, v
- return -ENODEV;
- }
-
--#define is_leap(year) \
-- ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
--
--/* make sure the rtc_time values are in bounds */
--static int x1205_validate_tm(struct rtc_time *tm)
--{
-- int year = tm->tm_year + 1900;
--
-- if ((tm->tm_year < 70) || (tm->tm_year > 255))
-- return -EINVAL;
--
-- if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
-- return -EINVAL;
--
-- if (tm->tm_mday > days_in_mo[tm->tm_mon]
-- + ((tm->tm_mon == 1) && is_leap(year)))
-- return -EINVAL;
--
-- if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
-- return -EINVAL;
--
-- return 0;
--}
-
- /*
-- * In the routines that deal directly with the x1205 hardware, we use
-+ * in the routines that deal directly with the x1205 hardware, we use
- * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-- * Epoch is initialized as 2000. Time is set to UTC.
-+ * Epoch is inited as 2000. Time is set to UT
- */
-+
- static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
- u8 reg_base)
- {
-- unsigned char dt_addr[2] = { 0, reg_base };
-- static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
-+ static unsigned char dt_addr[] = { 0, };
-+ static unsigned char sr_addr[] = { 0, };
-
-- unsigned char buf[8], sr;
-+ unsigned char buf[8], sr;
-
- struct i2c_msg msgs[] = {
-- { client->addr, 0, 2, sr_addr }, /* setup read ptr */
-- { client->addr, I2C_M_RD, 1, &sr }, /* read status */
-- { client->addr, 0, 2, dt_addr }, /* setup read ptr */
-- { client->addr, I2C_M_RD, 8, buf }, /* read date */
-+ { client->addr, 0, 2, sr_addr }, /* random read */
-+ { client->addr, I2C_M_RD, 1, &sr },
-+ { client->addr, 0, 2, dt_addr }, /* random read */
-+ { client->addr, I2C_M_RD, 8, buf },
- };
-
-- struct x1205_data *data = i2c_get_clientdata(client);
-+ struct x1205_data *xdata = i2c_get_clientdata(client);
-
-- /* read status register */
-- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-- return -EIO;
-- }
-+ dt_addr[1] = reg_base;
-+ sr_addr[1] = X1205_REG_SR;
-
-- /* check for battery failure */
-- if (sr & X1205_SR_RTCF) {
-- dev_warn(&client->dev,
-- "Clock had a power failure, you must set the date.\n");
-- return -EINVAL;
-- }
-+ if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) ==
-+ ARRAY_SIZE(msgs)) {
-+ /* did we read the correct number of messages? */
-+
-+ /* check for battery failure */
-+ if (sr & X1205_SR_RTCF)
-+ {
-+ dev_info(&client->adapter->dev,
-+ "%s: Clock had a power failure, you must set the date.\n",
-+ DRIVER_NAME);
-
-- /* read date registers */
-- if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) {
-- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-- return -EIO;
-- }
--
-- dev_dbg(&client->dev,
-- "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
-- "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
-- __FUNCTION__,
-- buf[0], buf[1], buf[2], buf[3],
-- buf[4], buf[5], buf[6], buf[7]);
--
-- tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
-- tm->tm_min = BCD2BIN(buf[CCR_MIN]);
-- tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
-- tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-- tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
-- data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
-- tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900;
-- tm->tm_wday = buf[CCR_WDAY];
-+ return -EINVAL;
-+ }
-
-- dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-- "mday=%d, mon=%d, year=%d, wday=%d\n",
-- __FUNCTION__,
-- tm->tm_sec, tm->tm_min, tm->tm_hour,
-- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+ dev_dbg(&client->dev,
-+ "%s: raw read data - sec-%02x min-%02x hr-%02x"
-+ " mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n",
-+ __FUNCTION__,
-+ buf[0], buf[1], buf[2], buf[3],
-+ buf[4], buf[5], buf[6], buf[7]);
-+
-+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
-+ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
-+ buf[CCR_HOUR] &= ~X1205_HR_MIL;
-+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */
-+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
-+ xdata->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
-+ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900;
-+ tm->tm_wday = buf[CCR_WDAY];
-+
-+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-
-+ } else {
-+ dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
- return 0;
- }
-
-+
- static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
- int datetoo, u8 reg_base)
- {
- int i, err, xfer;
-
-- unsigned char buf[8];
-+ static unsigned char wel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL };
-
-- static const unsigned char wel[3] = { 0, X1205_REG_SR,
-- X1205_SR_WEL };
-
-- static const unsigned char rwel[3] = { 0, X1205_REG_SR,
-- X1205_SR_WEL | X1205_SR_RWEL };
-+ static unsigned char rwel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL | X1205_SR_RWEL };
-
-- static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-+ static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-
-- struct x1205_data *data = i2c_get_clientdata(client);
-+ static unsigned char data[3] = { 0, };
-+ static unsigned char buf[8];
-+
-+ struct x1205_data *xdata = i2c_get_clientdata(client);
-
-- /* check if all values in the tm struct are correct */
- if ((err = x1205_validate_tm(tm)) < 0)
- return err;
-
-@@ -258,124 +200,52 @@ static int x1205_set_datetime(struct i2c
- tm->tm_sec, tm->tm_min, tm->tm_hour,
- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-
-- buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
-- buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-
-- /* set hour and 24hr bit */
-+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
-+ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-+
-+ /* Set 24HR format */
- buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
-
-- /* should we also set the date? */
-- if (datetoo) {
-- buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-+ if (datetoo == X1205_DATETOO) {
-+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-
- /* month, 0 - 11 */
-- buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
-+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); /* input is 0-11 */
-
- /* year, since 1900 */
-- buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch);
-- buf[CCR_WDAY] = tm->tm_wday & 0x07;
-- buf[CCR_Y2K] = BIN2BCD(data->epoch / 100);
-+ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch));
-+ buf[CCR_WDAY] = tm->tm_wday & 7;
-+ buf[CCR_Y2K] = BIN2BCD(xdata->epoch / 100);
- }
-
-- /* this sequence is required to unlock the chip */
- xfer = i2c_master_send(client, wel, 3);
-- if (xfer != 3) {
-- dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
-+ dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
- return -EIO;
-- }
-
- xfer = i2c_master_send(client, rwel, 3);
-- if (xfer != 3) {
-- dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
-+ dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
- return -EIO;
-- }
-
-- /* write register's data */
-- for (i = 0; i < (datetoo ? 8 : 3); i++) {
-- unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
--
-- xfer = i2c_master_send(client, rdata, 3);
-- if (xfer != 3) {
-- dev_err(&client->dev,
-- "%s: xfer=%d addr=%02x, data=%02x\n",
-- __FUNCTION__,
-- xfer, rdata[1], rdata[2]);
-+ for (i = 0; i < 8; i++) {
-+ data[1] = i + reg_base;
-+ data[2] = buf[i];
-+ xfer = i2c_master_send(client, data, 3);
-+
-+ dev_dbg(&client->dev, "%s: xfer %d addr, %02x, data %02x\n",
-+ __FUNCTION__,
-+ xfer, data[1], data[2]);
-+
-+ if (xfer != 3)
- return -EIO;
-- }
- };
-
-- /* disable further writes */
- xfer = i2c_master_send(client, diswe, 3);
-- if (xfer != 3) {
-- dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
-- return -EIO;
-- }
--
-- return 0;
--}
--
--static int x1205_get_dtrim(struct i2c_client *client, int *trim)
--{
-- unsigned char dtr;
-- static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
--
-- struct i2c_msg msgs[] = {
-- { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
-- { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
-- };
--
-- /* read dtr register */
-- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-- return -EIO;
-- }
--
-- dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
--
-- *trim = 0;
--
-- if (dtr & X1205_DTR_DTR0)
-- *trim += 20;
--
-- if (dtr & X1205_DTR_DTR1)
-- *trim += 10;
--
-- if (dtr & X1205_DTR_DTR2)
-- *trim = -*trim;
--
-- return 0;
--}
--
--static int x1205_get_atrim(struct i2c_client *client, int *trim)
--{
-- s8 atr;
-- static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
--
-- struct i2c_msg msgs[] = {
-- { client->addr, 0, 2, atr_addr }, /* setup read ptr */
-- { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
-- };
--
-- /* read atr register */
-- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-- return -EIO;
-- }
--
-- dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
--
-- /* atr is a two's complement value on 6 bits,
-- * perform sign extension. The formula is
-- * Catr = (atr * 0.25pF) + 11.00pF.
-- */
-- if (atr & 0x20)
-- atr |= 0xC0;
--
-- dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
--
-- *trim = (atr * 250) + 11000;
--
-- dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
-+ dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
-+ return -EIO;
-
- return 0;
- }
-@@ -386,24 +256,28 @@ static int x1205_hctosys(struct i2c_clie
-
- struct rtc_time tm;
- struct timespec tv;
-+
-
- err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
-
-- if (err) {
-- dev_err(&client->dev,
-- "Unable to set the system clock\n");
-+ if (err)
-+ {
-+ dev_info(&client->adapter->dev,
-+ "%s: Unable to set the system clock\n",
-+ DRIVER_NAME);
-+
- return err;
-+
- }
-
-- /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
-- * whether it stores the most close value or the value with partial
-- * seconds truncated. However, it is important that we use it to store
-- * the truncated value. This is because otherwise it is necessary,
-- * in an rtc sync function, to read both xtime.tv_sec and
-- * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
-- * of >32bits is not possible. So storing the most close value would
-- * slow down the sync API. So here we have the truncated value and
-- * the best guess is to add 0.5s.
-+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether
-+ * it stores the most close value or the value with partial seconds
-+ * truncated, however it is important for x1205_sync_rtc that it be
-+ * defined to store the truncated value. This is because otherwise it
-+ * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the
-+ * sync function, and atomic reads of >32bits on ARM are not possible.
-+ * So storing the most close value would slow down the sync API. So
-+ * Here we have the truncated value and the best guess is to add 0.5s
- */
-
- tv.tv_nsec = NSEC_PER_SEC >> 1;
-@@ -413,15 +287,16 @@ static int x1205_hctosys(struct i2c_clie
- * the month to be in the range 1-12
- */
-
-- tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1,
-+ tv.tv_sec = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
- tm.tm_mday, tm.tm_hour,
- tm.tm_min, tm.tm_sec);
-
- do_settimeofday(&tv);
-
-- dev_info(&client->dev,
-- "setting the system clock to %d-%d-%d %d:%d:%d\n",
-- tm.tm_year + 1900, tm.tm_mon + 1,
-+ dev_info(&client->adapter->dev,
-+ "%s: Setting the system clock to %d-%d-%d %d:%d:%d\n",
-+ DRIVER_NAME,
-+ tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
- tm.tm_mday, tm.tm_hour, tm.tm_min,
- tm.tm_sec);
-
-@@ -432,7 +307,7 @@ struct x1205_limit
- {
- unsigned char reg;
- unsigned char mask;
-- unsigned char min;
-+ unsigned char min;
- unsigned char max;
- };
-
-@@ -443,16 +318,34 @@ static int x1205_validate_client(struct
- /* Probe array. We will read the register at the specified
- * address and check if the given bits are zero.
- */
-- static const unsigned char probe_zero_pattern[] = {
-- /* register, mask */
-+
-+ const unsigned char probe_zero_pattern[] = {
-+
- X1205_REG_SR, 0x18,
-+ X1205_REG_Y2K, 0xC6,
-+ X1205_REG_DW, 0xF8,
-+ X1205_REG_MO, 0xE0,
-+ X1205_REG_DT, 0xC0,
-+ X1205_REG_HR, 0x40,
-+ X1205_REG_MN, 0x80,
-+ X1205_REG_SC, 0x80,
- X1205_REG_DTR, 0xF8,
- X1205_REG_ATR, 0xC0,
- X1205_REG_INT, 0x18,
- X1205_REG_0, 0xFF,
-+ X1205_REG_Y2K1, 0xC6,
-+ X1205_REG_DWA1, 0x78,
-+ X1205_REG_MOA1, 0x60,
-+ X1205_REG_DTA1, 0x40,
-+ X1205_REG_HRA1, 0x40,
-+ X1205_REG_Y2K0, 0xC6,
-+ X1205_REG_DWA0, 0x78,
-+ X1205_REG_MOA0, 0x60,
-+ X1205_REG_DTA0, 0x40,
-+ X1205_REG_HRA0, 0x40,
- };
-
-- static const struct x1205_limit probe_limits_pattern[] = {
-+ const struct x1205_limit probe_limits_pattern[] = {
- /* register, mask, min, max */
- { X1205_REG_Y2K, 0xFF, 19, 20 },
- { X1205_REG_DW, 0xFF, 0, 6 },
-@@ -463,23 +356,41 @@ static int x1205_validate_client(struct
- { X1205_REG_MN, 0xFF, 0, 59 },
- { X1205_REG_SC, 0xFF, 0, 59 },
- { X1205_REG_Y2K1, 0xFF, 19, 20 },
-+ { X1205_REG_DWA1, 0x7F, 0, 6 },
-+ { X1205_REG_MOA1, 0x7F, 0, 12 },
-+ { X1205_REG_DTA1, 0x7F, 0, 31 },
-+ { X1205_REG_HRA1, 0x7F, 0, 23 },
-+ { X1205_REG_MNA1, 0x7F, 0, 59 },
-+ { X1205_REG_SCA1, 0x7F, 0, 59 },
- { X1205_REG_Y2K0, 0xFF, 19, 20 },
-+ { X1205_REG_DWA0, 0x7F, 0, 6 },
-+ { X1205_REG_MOA0, 0x7F, 0, 12 },
-+ { X1205_REG_DTA0, 0x7F, 0, 31 },
-+ { X1205_REG_HRA0, 0x7F, 0, 23 },
-+ { X1205_REG_MNA0, 0x7F, 0, 59 },
-+ { X1205_REG_SCA0, 0x7F, 0, 59 },
- };
-
- /* check that registers have bits a 0 where expected */
-- for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
-+
-+ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2)
-+ {
- unsigned char buf;
-
-- unsigned char addr[2] = { 0, probe_zero_pattern[i] };
-+ static unsigned char addr[2];
-
- struct i2c_msg msgs[2] = {
-- { client->addr, 0, 2, addr },
-+ { client->addr, 0, 2, addr }, /* random read */
- { client->addr, I2C_M_RD, 1, &buf },
- };
-
-+ addr[0] = 0x00;
-+ addr[1] = probe_zero_pattern[i];
-+
- xfer = i2c_transfer(client->adapter, msgs, 2);
-+
- if (xfer != 2) {
-- dev_err(&client->adapter->dev,
-+ dev_dbg(&client->adapter->dev,
- "%s: could not read register %x\n",
- __FUNCTION__, addr[1]);
-
-@@ -487,42 +398,47 @@ static int x1205_validate_client(struct
- }
-
- if ((buf & probe_zero_pattern[i+1]) != 0) {
-- dev_err(&client->adapter->dev,
-- "%s: register=%02x, zero pattern=%d, value=%x\n",
-+ dev_dbg(&client->adapter->dev,
-+ "%s: register %x, zero pattern %d: %x\n",
- __FUNCTION__, addr[1], i, buf);
-
- return -ENODEV;
- }
- }
-
-- /* check limits (only registers with bcd values) */
-- for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
-- unsigned char reg, value;
-+ /* check limits */
-
-- unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
-+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++)
-+ {
-+ unsigned char buf, val;
-+
-+ static unsigned char addr[2];
-
- struct i2c_msg msgs[2] = {
-- { client->addr, 0, 2, addr },
-- { client->addr, I2C_M_RD, 1, ® },
-+ { client->addr, 0, 2, addr }, /* random read */
-+ { client->addr, I2C_M_RD, 1, &buf },
- };
-
-+ addr[0] = 0x00;
-+ addr[1] = probe_limits_pattern[i].reg;
-+
- xfer = i2c_transfer(client->adapter, msgs, 2);
-
- if (xfer != 2) {
-- dev_err(&client->adapter->dev,
-+ dev_dbg(&client->adapter->dev,
- "%s: could not read register %x\n",
- __FUNCTION__, addr[1]);
-
- return -EIO;
- }
-
-- value = BCD2BIN(reg & probe_limits_pattern[i].mask);
-+ val = BCD2BIN(buf & probe_limits_pattern[i].mask);
-
-- if (value > probe_limits_pattern[i].max ||
-- value < probe_limits_pattern[i].min) {
-+ if (val > probe_limits_pattern[i].max ||
-+ val < probe_limits_pattern[i].min) {
- dev_dbg(&client->adapter->dev,
-- "%s: register=%x, lim pattern=%d, value=%d\n",
-- __FUNCTION__, addr[1], i, value);
-+ "%s: register %x, lim pattern %d: %d\n",
-+ __FUNCTION__, addr[1], i, val);
-
- return -ENODEV;
- }
-@@ -538,79 +454,66 @@ static int x1205_attach(struct i2c_adapt
- return i2c_probe(adapter, &addr_data, x1205_probe);
- }
-
--int x1205_direct_attach(int adapter_id,
-- struct i2c_client_address_data *address_data)
--{
-- int err;
-- struct i2c_adapter *adapter = i2c_get_adapter(adapter_id);
--
-- if (adapter) {
-- err = i2c_probe(adapter,
-- address_data, x1205_probe);
--
-- i2c_put_adapter(adapter);
--
-- return err;
-- }
--
-- return -ENODEV;
--}
--
- static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
- {
-- struct i2c_client *client;
-- struct x1205_data *data;
-+ struct i2c_client *new_client;
-+ struct x1205_data *xdata;
-
- int err = 0;
-
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-
-- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-- err = -ENODEV;
-- goto exit;
-- }
--
-- if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
-+ if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
-- /* Initialize our structures */
-- data->epoch = 2000;
-+ /* Fill our data structure */
-
-- client = &data->client;
-- client->addr = address;
-- client->driver = &x1205_driver;
-- client->adapter = adapter;
-+ memset(xdata, 0, sizeof(struct x1205_data));
-
-- strlcpy(client->name, "x1205", I2C_NAME_SIZE);
-+ xdata->epoch = 2000;
-+
-+
-+ /* Prepare i2c_client structure */
-+
-+ new_client = &xdata->client;
-+ i2c_set_clientdata(new_client, xdata);
-+ new_client->addr = address;
-+ new_client->adapter = adapter;
-+ new_client->driver = &x1205_driver;
-+ new_client->flags = 0;
-+
-+ strlcpy(new_client->name, "x1205", I2C_NAME_SIZE);
-
-- i2c_set_clientdata(client, data);
-
- /* Verify the chip is really an X1205 */
-- if (kind < 0) {
-- if (x1205_validate_client(client) < 0) {
-+
-+ if (kind < 0)
-+ {
-+ if (x1205_validate_client(new_client) < 0) {
- err = -ENODEV;
- goto exit_kfree;
- }
- }
-
- /* Inform the i2c layer */
-- if ((err = i2c_attach_client(client)))
-+ if ((err = i2c_attach_client(new_client)))
- goto exit_kfree;
-
-- list_add(&data->list, &x1205_clients);
-+ list_add(&xdata->list, &x1205_clients);
-
-- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+ dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n",
-+ DRIVER_NAME);
-
-- /* If requested, set the system time */
-+ /* If requested, se the system time */
- if (hctosys)
-- x1205_hctosys(client);
-+ x1205_hctosys(new_client);
-
- return 0;
-
- exit_kfree:
-- kfree(data);
-+ kfree(xdata);
-
- exit:
- return err;
-@@ -620,23 +523,44 @@ static int x1205_detach(struct i2c_clien
- {
- int err;
- struct x1205_data *data = i2c_get_clientdata(client);
--
-+
- dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- list_del(&data->list);
--
- kfree(data);
-+ return 0;
-+}
-+
-+/* make sure the rtc_time values are in bounds */
-+static int x1205_validate_tm(struct rtc_time *tm)
-+{
-+ tm->tm_year += 1900;
-+
-+ if (tm->tm_year < EPOCH_1970)
-+ return -EINVAL;
-+
-+ if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
-+ return -EINVAL;
-+
-+ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) &&
-+ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400)))))
-+ return -EINVAL;
-+
-+ if ((tm->tm_year -= EPOCH_1900) > 255)
-+ return -EINVAL;
-+
-+ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
-+ return -EINVAL;
-
- return 0;
- }
-
--static int x1205_command(struct i2c_client *client, unsigned int cmd,
-- void *param)
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm)
- {
-- if (param == NULL)
-+ if (client == NULL || tm == NULL)
- return -EINVAL;
-
- if (!capable(CAP_SYS_TIME))
-@@ -646,34 +570,26 @@ static int x1205_command(struct i2c_clie
-
- switch (cmd) {
- case X1205_CMD_GETDATETIME:
-- return x1205_get_datetime(client, param, X1205_CCR_BASE);
-+ return x1205_get_datetime(client, tm, X1205_CCR_BASE);
-
- case X1205_CMD_SETTIME:
-- return x1205_set_datetime(client, param, 0,
-- X1205_CCR_BASE);
-+ return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE);
-
- case X1205_CMD_SETDATETIME:
-- return x1205_set_datetime(client, param, 1,
-- X1205_CCR_BASE);
-+ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE);
-
- case X1205_CMD_GETALARM:
-- return x1205_get_datetime(client, param, X1205_ALM0_BASE);
-+ return x1205_get_datetime(client, tm, X1205_ALM0_BASE);
-
- case X1205_CMD_SETALARM:
-- return x1205_set_datetime(client, param, 1,
-- X1205_ALM0_BASE);
--
-- case X1205_CMD_GETDTRIM:
-- return x1205_get_dtrim(client, param);
--
-- case X1205_CMD_GETATRIM:
-- return x1205_get_atrim(client, param);
-+ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE);
-
- default:
- return -EINVAL;
- }
- }
-
-+
- static int __init x1205_init(void)
- {
- return i2c_add_driver(&x1205_driver);
-@@ -689,10 +605,8 @@ MODULE_AUTHOR(
- "Alessandro Zummo <a.zummo@towertech.it>");
- MODULE_DESCRIPTION("Xicor X1205 RTC driver");
- MODULE_LICENSE("GPL");
--MODULE_VERSION(DRV_VERSION);
-
- EXPORT_SYMBOL_GPL(x1205_do_command);
--EXPORT_SYMBOL_GPL(x1205_direct_attach);
-
- module_init(x1205_init);
- module_exit(x1205_exit);
---- linux-2.6.14/include/linux/x1205.h.orig 2005-11-07 22:38:42.196252187 -0800
-+++ linux-2.6.14/include/linux/x1205.h 2005-11-07 22:42:54.960157617 -0800
-@@ -1,31 +1,67 @@
--/*
-- * x1205.h - defines for drivers/i2c/chips/x1205.c
-- * Copyright 2004 Karen Spearel
-- * Copyright 2005 Alessandro Zummo
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- */
--
--#ifndef __LINUX_X1205_H__
--#define __LINUX_X1205_H__
-
- /* commands */
-
--#define X1205_CMD_GETDATETIME 0
--#define X1205_CMD_SETTIME 1
--#define X1205_CMD_SETDATETIME 2
-+#define X1205_CMD_GETDATETIME 0
-+#define X1205_CMD_SETTIME 1
-+#define X1205_CMD_SETDATETIME 2
- #define X1205_CMD_GETALARM 3
- #define X1205_CMD_SETALARM 4
--#define X1205_CMD_GETDTRIM 5
--#define X1205_CMD_SETDTRIM 6
--#define X1205_CMD_GETATRIM 7
--#define X1205_CMD_SETATRIM 8
-+
-+/* flags */
-+
-+#define X1205_NODATE 0
-+#define X1205_DATETOO 1
-+
-+/* offsets into read buf - add 2 for write buf */
-+
-+#define CCR_SEC 0
-+#define CCR_MIN 1
-+#define CCR_HOUR 2
-+#define CCR_MDAY 3
-+#define CCR_MONTH 4
-+#define CCR_YEAR 5
-+#define CCR_WDAY 6
-+#define CCR_Y2K 7
-+
-+#define X1205_REG_SR 0x3F /* status register */
-+#define X1205_REG_Y2K 0x37
-+#define X1205_REG_DW 0x36
-+#define X1205_REG_YR 0x35
-+#define X1205_REG_MO 0x34
-+#define X1205_REG_DT 0x33
-+#define X1205_REG_HR 0x32
-+#define X1205_REG_MN 0x31
-+#define X1205_REG_SC 0x30
-+#define X1205_REG_DTR 0x13
-+#define X1205_REG_ATR 0x12
-+#define X1205_REG_INT 0x11
-+#define X1205_REG_0 0x10
-+#define X1205_REG_Y2K1 0x0F
-+#define X1205_REG_DWA1 0x0E
-+#define X1205_REG_YRA1 0x0D
-+#define X1205_REG_MOA1 0x0C
-+#define X1205_REG_DTA1 0x0B
-+#define X1205_REG_HRA1 0x0A
-+#define X1205_REG_MNA1 0x09
-+#define X1205_REG_SCA1 0x08
-+#define X1205_REG_Y2K0 0x07
-+#define X1205_REG_DWA0 0x06
-+#define X1205_REG_YRA0 0x05
-+#define X1205_REG_MOA0 0x04
-+#define X1205_REG_DTA0 0x03
-+#define X1205_REG_HRA0 0x02
-+#define X1205_REG_MNA0 0x01
-+#define X1205_REG_SCA0 0x00
-+
-+#define X1205_I2C_BUS_ADDR 0x6f /* hardwired into x1205 */
-+#define X1205_CCR_BASE 0x30 /* Base address of CCR */
-+#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
-+
-+#define X1205_SR_RTCF 0x01
-+#define X1205_SR_WEL 0x02 /* Write Enable Latch bit */
-+#define X1205_SR_RWEL 0x04 /* Register Write Enable Bit */
-+
-+#define X1205_HR_MIL 0x80 /* set in ccr.hour for 24 hr mode */
-
- extern int x1205_do_command(unsigned int cmd, void *arg);
--extern int x1205_direct_attach(int adapter_id,
-- struct i2c_client_address_data *address_data);
-
--#endif /* __LINUX_X1205_H__ */
+++ /dev/null
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c.orig 2005-11-07 22:26:36.010556202 -0800
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c 2005-11-07 22:27:15.921067613 -0800
-@@ -504,7 +504,7 @@ static int __init n2iom_init(void)
- return -EBUSY;
- }
- else {
-- class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
-+ class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
- }
- #endif
-
-@@ -513,7 +513,7 @@ static int __init n2iom_init(void)
- return -EBUSY;
- }
- else {
-- class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
-+ class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
- }
-
- return 0;
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 7 22:59:39 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SWAP_PREFETCH=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_MACH_NSLU2=y
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI Transport Layers
-#
-# CONFIG_SAS_CLASS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_ACX is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-# CONFIG_KGDBOE is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-# CONFIG_VIDEO_SAA6588 is not set
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_GOTEMP is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISER4_FS is not set
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ASFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
---- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700
-+++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700
-@@ -38,10 +38,14 @@
- #define BYTE1(h) ((h) & 0xFF)
- #endif
-
-+#define FLASHWORD(a) (*(__u16*)(a))
-+#define FLASHVAL(a) FLASHWORD(a)
-+#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0)
-+
- static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
- {
- map_word val;
-- val.x[0] = *(__u16 *) (map->map_priv_1 + ofs);
-+ val.x[0] = FLASHVAL(map->map_priv_1 + ofs);
- return val;
- }
-
-@@ -53,19 +57,25 @@ static map_word ixp4xx_read16(struct map
- static void ixp4xx_copy_from(struct map_info *map, void *to,
- unsigned long from, ssize_t len)
- {
-- int i;
-- u8 *dest = (u8 *) to;
-- u16 *src = (u16 *) (map->map_priv_1 + from);
-- u16 data;
--
-- for (i = 0; i < (len / 2); i++) {
-- data = src[i];
-- dest[i * 2] = BYTE0(data);
-- dest[i * 2 + 1] = BYTE1(data);
-+ u8 *dest, *src;
-+
-+ if (len <= 0)
-+ return;
-+
-+ dest = (u8 *) to;
-+ src = (u8 *) (map->map_priv_1 + from);
-+ if (from & 1)
-+ *dest++ = BYTE1(FLASHVAL(src-1)), ++src, --len;
-+
-+ while (len >= 2) {
-+ u16 data = FLASHVAL(src); src += 2;
-+ *dest++ = BYTE0(data);
-+ *dest++ = BYTE1(data);
-+ len -= 2;
- }
-
-- if (len & 1)
-- dest[len - 1] = BYTE0(src[i]);
-+ if (len > 0)
-+ *dest++ = BYTE0(FLASHVAL(src));
- }
-
- /*
-@@ -75,7 +85,7 @@ static void ixp4xx_copy_from(struct map_
- static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
- {
- if (!(adr & 1))
-- *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
-+ FLASHSET(map->map_priv_1 + adr, d.x[0]);
- }
-
- /*
-@@ -83,7 +93,7 @@ static void ixp4xx_probe_write16(struct
- */
- static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
- {
-- *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
-+ FLASHSET(map->map_priv_1 + adr, d.x[0]);
- }
-
- struct ixp4xx_flash_info {
+++ /dev/null
---- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700
-+++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700
-@@ -22,6 +22,7 @@
- #include <linux/string.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/map.h>
-+#include <linux/mtd/cfi_endian.h>
- #include <linux/mtd/partitions.h>
- #include <linux/ioport.h>
- #include <linux/device.h>
-@@ -30,17 +31,40 @@
-
- #include <linux/reboot.h>
-
-+/* On a little-endian IXP4XX system (tested on NSLU2) an LDRH or STRH
-+ * will flip the second address bit - i.e. XOR the address with 10b.
-+ * This causes the cfi commands (sent to the command address, 0xAA for
-+ * 16 bit flash) to fail. This is fixed here by XOR'ing the address
-+ * before use with 10b. The cost of this is that the flash layout ends
-+ * up with pdp-endiannes (on an LE system), however this is not a problem
-+ * as the access code consistently only accesses half words - so the
-+ * endianness is not determinable on stuff which is written and read
-+ * consistently in the little endian world.
-+ *
-+ * For flash data from the big-endian world, however, the results are
-+ * weird - the pdp-endianness results in the data apparently being
-+ * 2-byte swapped (as in dd conv=swab). To work round this the 16
-+ * bit values are written and read using cpu_to_cfi16 and cfi16_to_cpu,
-+ * by default these are no-ops, but if the MTD driver is configed with
-+ * CONFIG_MTD_CFI_BE_BYTE_SWAP the macros will byte swap the data,
-+ * resulting in a consistently BE view of the flash on both BE (no
-+ * op) and LE systems. This config setting also causes the command
-+ * data from the CFI implementation to get swapped - as is required
-+ * so that this code will *unswap* it and give the correct command
-+ * data to the flash.
-+ */
- #ifndef __ARMEB__
- #define BYTE0(h) ((h) & 0xFF)
- #define BYTE1(h) (((h) >> 8) & 0xFF)
-+#define FLASHWORD(a) (*(__u16*)((u32)(a) ^ 2))
- #else
- #define BYTE0(h) (((h) >> 8) & 0xFF)
- #define BYTE1(h) ((h) & 0xFF)
-+#define FLASHWORD(a) (*(__u16*)(a))
- #endif
-
--#define FLASHWORD(a) (*(__u16*)(a))
--#define FLASHVAL(a) FLASHWORD(a)
--#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0)
-+#define FLASHVAL(a) cfi16_to_cpu(FLASHWORD(a))
-+#define FLASHSET(a,v) (FLASHWORD(a) = cpu_to_cfi16(v))
-
- static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
- {
+++ /dev/null
-drivers/mtd/redboot.c: recognise a foreign byte sex partition table
-
-The RedBoot boot loader writes flash partition tables containing native
-byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an
-LE kernel from BE RedBoot) the current MTD driver fails to handle the
-partition table and therefore is unable to generate the correct partition
-map for the flash.
-
-The patch recognises that the FIS directory (the partition table) is
-byte-reversed by examining the partition table size, which is known to be
-one erase block (this is an assumption made elsewhere in redboot.c). If
-the size matches the erase block after byte swapping the value then
-byte-reversal is assumed, if not no further action is taken. The patched
-code is fail safe; should redboot.c be changed to support a partition table
-with a modified size field the test will fail and the partition table will
-be assumed to have the host byte sex.
-
-If byte-reversal is detected the patch byte swaps the remainder of the 32
-bit fields in the copy of the table; this copy is then used to set up the
-MTD partition map.
-
-Signed-off-by: John Bowler <jbowler@acm.org>
-Signed-off-by: Andrew Morton <akpm@osdl.org>
-Modified slightly and
-Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
-Index: drivers/mtd/redboot.c
-===================================================================
-RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v
-retrieving revision 1.18
-retrieving revision 1.19
-diff -u -p -r1.18 -r1.19
---- linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
-@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru
- i = numslots;
- break;
- }
-- if (!memcmp(buf[i].name, "FIS directory", 14))
-+ if (!memcmp(buf[i].name, "FIS directory", 14)) {
-+ /* This is apparently the FIS directory entry for the
-+ * FIS directory itself. The FIS directory size is
-+ * one erase block; if the buf[i].size field is
-+ * swab32(erasesize) then we know we are looking at
-+ * a byte swapped FIS directory - swap all the entries!
-+ * (NOTE: this is 'size' not 'data_length'; size is
-+ * the full size of the entry.)
-+ */
-+ if (swab32(buf[i].size) == master->erasesize) {
-+ int j;
-+ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
-+ /* The unsigned long fields were written with the
-+ * wrong byte sex, name and pad have no byte sex.
-+ */
-+ swab32s(&buf[j].flash_base);
-+ swab32s(&buf[j].mem_base);
-+ swab32s(&buf[j].size);
-+ swab32s(&buf[j].entry_point);
-+ swab32s(&buf[j].data_length);
-+ swab32s(&buf[j].desc_cksum);
-+ swab32s(&buf[j].file_cksum);
-+ }
-+ }
- break;
-+ }
- }
- if (i == numslots) {
- /* Didn't find it */
-
-
+++ /dev/null
-# The inline caller of these APIs were changed to have
-# const vaddr parameters...
---- linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h.orig 2005-09-24 17:06:19.968099976 -0700
-+++ linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h 2005-09-24 17:06:52.542149731 -0700
-@@ -113,7 +113,7 @@
- }
-
- static inline void
--__ixp4xx_writesb(u32 bus_addr, u8 *vaddr, int count)
-+__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count)
- {
- while (count--)
- writeb(*vaddr++, bus_addr);
-@@ -136,7 +136,7 @@
- }
-
- static inline void
--__ixp4xx_writesw(u32 bus_addr, u16 *vaddr, int count)
-+__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count)
- {
- while (count--)
- writew(*vaddr++, bus_addr);
-@@ -154,7 +154,7 @@
- }
-
- static inline void
--__ixp4xx_writesl(u32 bus_addr, u32 *vaddr, int count)
-+__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count)
- {
- while (count--)
- writel(*vaddr++, bus_addr);
+++ /dev/null
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:33:21.757679882 -0700
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:47:02.581331058 -0700
-@@ -80,9 +80,9 @@ __ixp4xx_iounmap(void __iomem *addr)
- #define __arch_ioremap(a, s, f, x) __ixp4xx_ioremap(a, s, f, x)
- #define __arch_iounmap(a) __ixp4xx_iounmap(a)
-
--#define writeb(p, v) __ixp4xx_writeb(p, v)
--#define writew(p, v) __ixp4xx_writew(p, v)
--#define writel(p, v) __ixp4xx_writel(p, v)
-+#define writeb(v, p) __ixp4xx_writeb(v, p)
-+#define writew(v, p) __ixp4xx_writew(v, p)
-+#define writel(v, p) __ixp4xx_writel(v, p)
-
- #define writesb(p, v, l) __ixp4xx_writesb(p, v, l)
- #define writesw(p, v, l) __ixp4xx_writesw(p, v, l)
-@@ -97,8 +97,9 @@ __ixp4xx_iounmap(void __iomem *addr)
- #define readsl(p, v, l) __ixp4xx_readsl(p, v, l)
-
- static inline void
--__ixp4xx_writeb(u8 value, u32 addr)
-+__ixp4xx_writeb(u8 value, volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START) {
-@@ -113,15 +114,16 @@ __ixp4xx_writeb(u8 value, u32 addr)
- }
-
- static inline void
--__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count)
-+__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
- {
- while (count--)
- writeb(*vaddr++, bus_addr);
- }
-
- static inline void
--__ixp4xx_writew(u16 value, u32 addr)
-+__ixp4xx_writew(u16 value, volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START) {
-@@ -136,15 +138,16 @@ __ixp4xx_writew(u16 value, u32 addr)
- }
-
- static inline void
--__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count)
-+__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
- {
- while (count--)
- writew(*vaddr++, bus_addr);
- }
-
- static inline void
--__ixp4xx_writel(u32 value, u32 addr)
-+__ixp4xx_writel(u32 value, volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- if (addr >= VMALLOC_START) {
- __raw_writel(value, addr);
- return;
-@@ -154,15 +157,16 @@ __ixp4xx_writel(u32 value, u32 addr)
- }
-
- static inline void
--__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count)
-+__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
- {
- while (count--)
- writel(*vaddr++, bus_addr);
- }
-
- static inline unsigned char
--__ixp4xx_readb(u32 addr)
-+__ixp4xx_readb(const volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START)
-@@ -177,15 +181,16 @@ __ixp4xx_readb(u32 addr)
- }
-
- static inline void
--__ixp4xx_readsb(u32 bus_addr, u8 *vaddr, u32 count)
-+__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
- {
- while (count--)
- *vaddr++ = readb(bus_addr);
- }
-
- static inline unsigned short
--__ixp4xx_readw(u32 addr)
-+__ixp4xx_readw(const volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (addr >= VMALLOC_START)
-@@ -200,15 +205,16 @@ __ixp4xx_readw(u32 addr)
- }
-
- static inline void
--__ixp4xx_readsw(u32 bus_addr, u16 *vaddr, u32 count)
-+__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
- {
- while (count--)
- *vaddr++ = readw(bus_addr);
- }
-
- static inline unsigned long
--__ixp4xx_readl(u32 addr)
-+__ixp4xx_readl(const volatile void __iomem *p)
- {
-+ u32 addr = (u32)p;
- u32 data;
-
- if (addr >= VMALLOC_START)
-@@ -221,7 +227,7 @@ __ixp4xx_readl(u32 addr)
- }
-
- static inline void
--__ixp4xx_readsl(u32 bus_addr, u32 *vaddr, u32 count)
-+__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
- {
- while (count--)
- *vaddr++ = readl(bus_addr);
-@@ -239,7 +245,7 @@ __ixp4xx_readsl(u32 bus_addr, u32 *vaddr
- eth_copy_and_sum((s),__mem_pci(c),(l),(b))
-
- static inline int
--check_signature(unsigned long bus_addr, const unsigned char *signature,
-+check_signature(const unsigned char __iomem *bus_addr, const unsigned char *signature,
- int length)
- {
- int retval = 0;
-@@ -389,7 +395,7 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u
- #define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \
- ((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
- static inline unsigned int
--__ixp4xx_ioread8(void __iomem *addr)
-+__ixp4xx_ioread8(const void __iomem *addr)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -398,12 +404,12 @@ __ixp4xx_ioread8(void __iomem *addr)
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return (unsigned int)__raw_readb(port);
- #else
-- return (unsigned int)__ixp4xx_readb(port);
-+ return (unsigned int)__ixp4xx_readb(addr);
- #endif
- }
-
- static inline void
--__ixp4xx_ioread8_rep(void __iomem *addr, void *vaddr, u32 count)
-+__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -412,12 +418,12 @@ __ixp4xx_ioread8_rep(void __iomem *addr,
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsb(addr, vaddr, count);
- #else
-- __ixp4xx_readsb(port, vaddr, count);
-+ __ixp4xx_readsb(addr, vaddr, count);
- #endif
- }
-
- static inline unsigned int
--__ixp4xx_ioread16(void __iomem *addr)
-+__ixp4xx_ioread16(const void __iomem *addr)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -426,12 +432,12 @@ __ixp4xx_ioread16(void __iomem *addr)
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le16_to_cpu(__raw_readw((u32)port));
- #else
-- return (unsigned int)__ixp4xx_readw((u32)port);
-+ return (unsigned int)__ixp4xx_readw(addr);
- #endif
- }
-
- static inline void
--__ixp4xx_ioread16_rep(void __iomem *addr, void *vaddr, u32 count)
-+__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -440,12 +446,12 @@ __ixp4xx_ioread16_rep(void __iomem *addr
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsw(addr, vaddr, count);
- #else
-- __ixp4xx_readsw(port, vaddr, count);
-+ __ixp4xx_readsw(addr, vaddr, count);
- #endif
- }
-
- static inline unsigned int
--__ixp4xx_ioread32(void __iomem *addr)
-+__ixp4xx_ioread32(const void __iomem *addr)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -454,13 +460,13 @@ __ixp4xx_ioread32(void __iomem *addr)
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le32_to_cpu(__raw_readl((u32)port));
- #else
-- return (unsigned int)__ixp4xx_readl((u32)port);
-+ return (unsigned int)__ixp4xx_readl(addr);
- #endif
- }
- }
-
- static inline void
--__ixp4xx_ioread32_rep(void __iomem *addr, void *vaddr, u32 count)
-+__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
- {
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
-@@ -469,7 +475,7 @@ __ixp4xx_ioread32_rep(void __iomem *addr
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsl(addr, vaddr, count);
- #else
-- __ixp4xx_readsl(port, vaddr, count);
-+ __ixp4xx_readsl(addr, vaddr, count);
- #endif
- }
-
-@@ -483,7 +489,7 @@ __ixp4xx_iowrite8(u8 value, void __iomem
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writeb(value, port);
- #else
-- __ixp4xx_writeb(value, port);
-+ __ixp4xx_writeb(value, addr);
- #endif
- }
-
-@@ -497,7 +503,7 @@ __ixp4xx_iowrite8_rep(void __iomem *addr
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesb(addr, vaddr, count);
- #else
-- __ixp4xx_writesb(port, vaddr, count);
-+ __ixp4xx_writesb(addr, vaddr, count);
- #endif
- }
-
-@@ -511,7 +517,7 @@ __ixp4xx_iowrite16(u16 value, void __iom
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writew(cpu_to_le16(value), addr);
- #else
-- __ixp4xx_writew(value, port);
-+ __ixp4xx_writew(value, addr);
- #endif
- }
-
-@@ -525,7 +531,7 @@ __ixp4xx_iowrite16_rep(void __iomem *add
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesw(addr, vaddr, count);
- #else
-- __ixp4xx_writesw(port, vaddr, count);
-+ __ixp4xx_writesw(addr, vaddr, count);
- #endif
- }
-
-@@ -539,7 +545,7 @@ __ixp4xx_iowrite32(u32 value, void __iom
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writel(cpu_to_le32(value), port);
- #else
-- __ixp4xx_writel(value, port);
-+ __ixp4xx_writel(value, addr);
- #endif
- }
-
-@@ -553,7 +559,7 @@ __ixp4xx_iowrite32_rep(void __iomem *add
- #ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesl(addr, vaddr, count);
- #else
-- __ixp4xx_writesl(port, vaddr, count);
-+ __ixp4xx_writesl(addr, vaddr, count);
- #endif
- }
-
+++ /dev/null
---- linux-2.6.14.1/fs/jffs2/nodelist.h.orig 2005-11-09 23:12:29.641449728 -0800
-+++ linux-2.6.14.1/fs/jffs2/nodelist.h 2005-11-09 23:13:19.228570049 -0800
-@@ -44,7 +44,9 @@
- #define D2(x)
- #endif
-
--#define JFFS2_NATIVE_ENDIAN
-+#undef JFFS2_NATIVE_ENDIAN
-+#define JFFS2_BIG_ENDIAN 1
-+#undef JFFS2_LITTLE_ENDIAN
-
- /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from
- whatever OS we're actually running on here too. */
+++ /dev/null
---- linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void)
- * IXP4xx timer tick
- * We use OS timer1 on the CPU for the timer tick and the timestamp
- * counter as a source of real clock ticks to account for missed jiffies.
-+ *
-+ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second,
-+ * this is significantly greater than the actual number on any ixp4xx
-+ * board. Neither this nor 'LATCH' are required by this code because
-+ * the only requirement is to generate HZ timer_tick calls per second.
- *************************************************************************/
-+#if TICK_NSEC * HZ != 1000000000
-+ /* This will cause the jiffies to drift unnecessarily. */
-+# error CLOCK_TICK_RATE should be a multiple of HZ for this code
-+#endif
-+
-+/* These are the control registers for the interrupt handler, they must
-+ * only be read and written by the interrupt handler and by the init
-+ * method (which sets them to 0).
-+ */
-+static volatile u32 last_timer_time;
-+static volatile int accumulated_error;
-+
-+/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset
-+ * this from the board level code if required. The following variables
-+ * must be *written* only by set_board_tick_rate
-+ */
-+static u32 board_tick_rate;
-+static u32 board_tick_per_1000; /* board_tick_rate/1000 */
-+static u32 timer_count;
-+
-+/* The following symbol may be written to change the current tick rate,
-+ * it is read by the interrupt handler and used to reload the timer.
-+ * The 'real' value (the one in use) is 'board_tick_rate' above.
-+ * NOTE: this can be tweaked to match the actual crystal on a particular
-+ * machine.
-+ */
-+volatile u32 ixp4xx_board_tick_rate = 66666600;
-+EXPORT_SYMBOL(ixp4xx_board_tick_rate);
-+
-+/* The set API may run asynchronously in the presence of interrupts,
-+ * everything it does it is both atomic and complete (notice that it
-+ * doesn't change any of the 'volatile' values). The mathematics in
-+ * here require the following values. Changing the board tick rate
-+ * implies an unknown error in the current timestamp tick count.
-+ */
-+#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1
-+# error unexpected value for timer reload mask
-+#endif
-+static void set_board_tick_rate(u32 rate) {
-+ u32 reload;
-+
-+ /* Store the two effectively informational rate values, the
-+ * error calculation is (rate - count*HZ) (above), and rate
-+ * is changed first, this can cause a temporary error which
-+ * will be corrected on the next interrupt.
-+ */
-+ board_tick_rate = rate;
-+ board_tick_per_1000 = (rate+500)/1000;
-+
-+ /* Calculate the correct value to load into the timer countdown
-+ * register, the low two bits must be b01 (to enable the timer).
-+ * Select the top bits to be as close to the desired value as
-+ * possible.
-+ *
-+ * First find the best value, regardless of the low two bits -
-+ * this is the value used in the interrupt calculation even though
-+ * it cannot necessarily be set into the register.
-+ */
-+ timer_count = (rate + (HZ/2))/HZ;
-+
-+ /* Now the timer_ticks are being generated at this rate, calculate
-+ * an appropriate value for the register. This stores a 30 bit
-+ * value which gives a period of 4*x+1, we want:
-+ *
-+ * 4*x+1 = board_tick_rate/HZ
-+ *
-+ * This needs to be rounded to the closest 4*HZ value:
-+ *
-+ * x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ
-+ * x = (board_tick_rate+HZ) / (4*HZ);
-+ */
-+ reload = (board_tick_rate + HZ) / HZ;
-+ reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ *IXP4XX_OSRT1 = reload;
-
--static unsigned volatile last_jiffy_time;
-+ /* If the clock is drifing, look in syslog: */
-+ printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload);
-+}
-
--#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+/* This returns the time in timer ticks since the 'last_timer_time'
-+ * recorded above. Use this to avoid arithmetic errors because of
-+ * the overflow when the timer wraps.
-+ */
-+static inline u32 ixp4xx_timer_delta(void)
-+{
-+ return *IXP4XX_OSTS - last_timer_time;
-+}
-
- /* IRQs are disabled before entering here from do_gettimeofday() */
- static unsigned long ixp4xx_gettimeoffset(void)
- {
-- u32 elapsed;
--
-- elapsed = *IXP4XX_OSTS - last_jiffy_time;
-+ /* Return the offset of the current time from the last time
-+ * timer tick in microseconds. This is only used for the
-+ * gettimeofday call.
-+ *
-+ * The result of this API is at most about 20000 (for a 50Hz
-+ * HZ - 20000 uS/tick), the input delta is at most about
-+ * 1.3M - 21 bits.
-+ */
-+ u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */
-+ /* return delta * 1000000 / board_tick_rate; */
-+ return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000;
-+}
-
-- return elapsed / CLOCK_TICKS_PER_USEC;
-+/* This is the correct adjustment to the counter to compensate for an
-+ * error iff timer_count-1 <= exact_count <= timer_count+1
-+ */
-+static inline int adjustment(int error) {
-+ if (error >= HZ)
-+ return 1;
-+ else if (error <= -HZ)
-+ return -1;
-+ return 0;
- }
-
- static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
-+ u32 rate;
-+ u32 count;
-+ int error;
-+
- write_seqlock(&xtime_lock);
-
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-+ /* If the board tick rate has been changed update the cached
-+ * value.
-+ */
-+ if (ixp4xx_board_tick_rate != board_tick_rate) {
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-+ accumulated_error = 0;
-+ }
-+
- /*
- * Catch up with the real idea of time
-+ *
-+ * board_tick_rate: actual ixp4xx ticks/second, read-only
-+ * accumulated_error: aggregate error/tick * HZ, read/write
-+ * timer_count: best ixp4xx ticks per timer_tick, read-only
- */
-- while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
-+ rate = board_tick_rate;
-+ error = accumulated_error;
-+ count = timer_count;
-+ do {
-+ u32 adjusted_count = count + adjustment(error);
-+ if (ixp4xx_timer_delta() < adjusted_count)
-+ break;
- timer_tick(regs);
-- last_jiffy_time += LATCH;
-- }
-+ last_timer_time += adjusted_count;
-+ error += rate - adjusted_count*HZ;
-+ } while (1);
-+ accumulated_error = error;
-
- write_sequnlock(&xtime_lock);
-
-@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq
- .handler = ixp4xx_timer_interrupt,
- };
-
-+u32 ixp4xx_get_board_tick_rate(void) {
-+ return board_tick_rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_get_board_tick_rate);
-+
-+void ixp4xx_set_board_tick_rate(u32 rate) {
-+ ixp4xx_board_tick_rate = rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_set_board_tick_rate);
-+
- static void __init ixp4xx_timer_init(void)
- {
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
- /* Setup the Timer counter value */
-- *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-
- /* Reset time-stamp counter */
- *IXP4XX_OSTS = 0;
-- last_jiffy_time = 0;
-+ last_timer_time = 0;
-+ accumulated_error = 0;
-
- /* Connect the interrupt handler and enable the interrupt */
- setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
-@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void)
- ARRAY_SIZE(ixp46x_devices));
- }
- }
--
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-@@ -119,6 +119,11 @@ static void nslu2_power_off(void)
-
- static void __init nslu2_init(void)
- {
-+ /* The NSLU2 has a 33MHz crystal on board - 1.01% different
-+ * from the typical value.
-+ */
-+ ixp4xx_set_board_tick_rate(66000000);
-+
- ixp4xx_sys_init();
-
- pm_power_off = nslu2_power_off;
---- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input
- }
-
- if (value > 20 && value < 32767)
-- count = (NSLU2_FREQ / (value*4)) - 1;
-+ count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1;
-
- spin_lock_irqsave(&beep_lock, flags);
-
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-@@ -38,11 +38,6 @@
- #define NSLU2_PCI_INTD_PIN 8
-
-
--/* NSLU2 Timer */
--#define NSLU2_FREQ 66000000
--#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
--#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
--
- /* GPIO */
-
- #define NSLU2_GPIO0 0
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-@@ -6,10 +6,23 @@
- #include <asm/hardware.h>
-
- /*
-- * We use IXP425 General purpose timer for our timer needs, it runs at
-- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
-- * timer register ignores the bottom 2 bits of the LATCH value.
-+ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and
-+ * is the number of internal counts per timer interrupt. Thus
-+ * CLOCK_TICK_RATE is LATCH*HZ.
-+ *
-+ * The actual values of these numbers do not matter, because they
-+ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed
-+ * point number), so the value here gives a LATCH of 1 and pretty
-+ * much guarantees to flush out any off-by-one errors.
-+ *
-+ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of
-+ * HZ, this is checked in the ixp4xx/common.c code.
- */
--#define FREQ 66666666
--#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define CLOCK_TICK_RATE HZ
-
-+/* The following allow the exact board tick rate to be set and
-+ * discovered. The value should be exactly twice the frequency
-+ * (in Hz) of the onboard crystal.
-+ */
-+extern u32 ixp4xx_get_board_tick_rate(void);
-+extern void ixp4xx_set_board_tick_rate(u32 new_rate);
+++ /dev/null
---- linux-2.6.14-rc5/include/linux/spinlock_up.h 2005-10-26 08:37:20.164248408 -0700
-+++ patched/include/linux/spinlock_up.h 2005-10-26 12:15:13.458898975 -0700
-@@ -47,6 +47,14 @@ static inline void __raw_spin_unlock(raw
- lock->slock = 1;
- }
-
-+#else /* DEBUG_SPINLOCK */
-+#define __raw_spin_is_locked(lock) ((void)(lock), 0)
-+/* for sched.c and kernel_lock.c: */
-+# define __raw_spin_lock(lock) do { (void)(lock); } while (0)
-+# define __raw_spin_unlock(lock) do { (void)(lock); } while (0)
-+# define __raw_spin_trylock(lock) ({ (void)(lock); 1; })
-+#endif /* DEBUG_SPINLOCK */
-+
- /*
- * Read-write spinlocks. No debug version.
- */
-@@ -57,14 +65,6 @@ static inline void __raw_spin_unlock(raw
- #define __raw_read_unlock(lock) do { (void)(lock); } while (0)
- #define __raw_write_unlock(lock) do { (void)(lock); } while (0)
-
--#else /* DEBUG_SPINLOCK */
--#define __raw_spin_is_locked(lock) ((void)(lock), 0)
--/* for sched.c and kernel_lock.c: */
--# define __raw_spin_lock(lock) do { (void)(lock); } while (0)
--# define __raw_spin_unlock(lock) do { (void)(lock); } while (0)
--# define __raw_spin_trylock(lock) ({ (void)(lock); 1; })
--#endif /* DEBUG_SPINLOCK */
--
- #define __raw_read_can_lock(lock) (((void)(lock), 1))
- #define __raw_write_can_lock(lock) (((void)(lock), 1))
-
+++ /dev/null
---- linux-2.6.14-rc5/net/ipv4/route.c 2005-10-26 08:37:20.752285410 -0700
-+++ patched/net/ipv4/route.c 2005-10-26 12:17:00.761651111 -0700
-@@ -231,7 +231,7 @@ static spinlock_t *rt_hash_locks;
- spin_lock_init(&rt_hash_locks[i]); \
- }
- #else
--# define rt_hash_lock_addr(slot) NULL
-+# define rt_hash_lock_addr(slot) ((spinlock_t*)NULL)
- # define rt_hash_lock_init()
- #endif
-
+++ /dev/null
-diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Kconfig test9/drivers/i2c/chips/Kconfig
---- linux-2.6.14-rc3/drivers/i2c/chips/Kconfig 2005-10-01 13:46:50.000000000 +0200
-+++ test9/drivers/i2c/chips/Kconfig 2005-10-03 16:10:22.000000000 +0200
-@@ -126,4 +126,13 @@
- This driver can also be built as a module. If so, the module
- will be called max6875.
-
-+config SENSORS_X1205
-+ tristate "Xicor X1205 RTC chip"
-+ depends on I2C
-+ help
-+ If you say yes here you get support for the Xicor X1205 RTC chip.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called x1205
-+
- endmenu
-diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Makefile test9/drivers/i2c/chips/Makefile
---- linux-2.6.14-rc3/drivers/i2c/chips/Makefile 2005-09-17 12:42:33.000000000 +0200
-+++ test9/drivers/i2c/chips/Makefile 2005-10-01 15:30:06.000000000 +0200
-@@ -13,6 +13,7 @@
- obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o
- obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
- obj-$(CONFIG_TPS65010) += tps65010.o
-+obj-$(CONFIG_SENSORS_X1205) += x1205.o
-
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
-diff -urN linux-2.6.14-rc3/drivers/i2c/chips/x1205.c test9/drivers/i2c/chips/x1205.c
---- linux-2.6.14-rc3/drivers/i2c/chips/x1205.c 1970-01-01 01:00:00.000000000 +0100
-+++ test9/drivers/i2c/chips/x1205.c 2005-10-03 16:02:57.000000000 +0200
-@@ -0,0 +1,612 @@
-+/*
-+ * linux/drivers/i2c/chips/x1205.c
-+ *
-+ * x1205.c - An 12c driver for the Xicor X1205 RTC
-+ * Copyright 2004 Karen Spearel
-+ * Copyright 2005 Alessandro Zummo
-+ *
-+ * please send all reports to:
-+ * kas11 at tampabay dot rr dot com
-+ * a dot zummo at towertech dot it
-+ *
-+ * based on the other drivers in this same directory.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/string.h>
-+#include <linux/bcd.h>
-+#include <linux/rtc.h>
-+#include <linux/list.h>
-+
-+#include <linux/x1205.h>
-+
-+#define EPOCH_1900 1900
-+#define EPOCH_1970 1970
-+
-+#define DRIVER_VERSION "0.9.6"
-+#define DRIVER_NAME (x1205_driver.name)
-+
-+
-+/* Addresses to scan */
-+static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+ "Set the system time from the hardware clock upon initialization");
-+
-+/* Prototypes */
-+
-+static int x1205_attach(struct i2c_adapter *adapter);
-+static int x1205_detach(struct i2c_client *client);
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
-+static int x1205_validate_client(struct i2c_client *client);
-+
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ u8 reg_base);
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ int datetoo, u8 reg_base);
-+static int x1205_validate_tm(struct rtc_time *tm);
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg);
-+static int x1205_hctosys(struct i2c_client *client);
-+
-+
-+static struct i2c_driver x1205_driver = {
-+ .owner = THIS_MODULE,
-+ .name = "x1205",
-+ .flags = I2C_DF_NOTIFY,
-+ .attach_adapter = &x1205_attach,
-+ .detach_client = &x1205_detach,
-+/* .command = &x1205_command,*/
-+};
-+
-+struct x1205_data {
-+ struct i2c_client client;
-+ struct list_head list;
-+ unsigned int epoch;
-+};
-+
-+
-+static const unsigned char days_in_mo[] =
-+{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-+
-+static LIST_HEAD(x1205_clients);
-+
-+/* Workaround until the I2C subsytem will allow to send
-+ * commands to a specific client. This function will send the command
-+ * to the first client.
-+ */
-+
-+int x1205_do_command(unsigned int cmd, void *arg)
-+{
-+ struct list_head *walk;
-+ struct list_head *tmp;
-+ struct x1205_data *data;
-+
-+ list_for_each_safe(walk, tmp, &x1205_clients) {
-+ data = list_entry(walk, struct x1205_data, list);
-+ return x1205_command(&data->client, cmd, arg);
-+ }
-+
-+ return -ENODEV;
-+}
-+
-+
-+/*
-+ * in the routines that deal directly with the x1205 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-+ * Epoch is inited as 2000. Time is set to UT
-+ */
-+
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ u8 reg_base)
-+{
-+ static unsigned char dt_addr[] = { 0, };
-+ static unsigned char sr_addr[] = { 0, };
-+
-+ unsigned char buf[8], sr;
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, sr_addr }, /* random read */
-+ { client->addr, I2C_M_RD, 1, &sr },
-+ { client->addr, 0, 2, dt_addr }, /* random read */
-+ { client->addr, I2C_M_RD, 8, buf },
-+ };
-+
-+ struct x1205_data *xdata = i2c_get_clientdata(client);
-+
-+ dt_addr[1] = reg_base;
-+ sr_addr[1] = X1205_REG_SR;
-+
-+ if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) ==
-+ ARRAY_SIZE(msgs)) {
-+ /* did we read the correct number of messages? */
-+
-+ /* check for battery failure */
-+ if (sr & X1205_SR_RTCF)
-+ {
-+ dev_info(&client->adapter->dev,
-+ "%s: Clock had a power failure, you must set the date.\n",
-+ DRIVER_NAME);
-+
-+ return -EINVAL;
-+ }
-+
-+ dev_dbg(&client->dev,
-+ "%s: raw read data - sec-%02x min-%02x hr-%02x"
-+ " mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n",
-+ __FUNCTION__,
-+ buf[0], buf[1], buf[2], buf[3],
-+ buf[4], buf[5], buf[6], buf[7]);
-+
-+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
-+ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
-+ buf[CCR_HOUR] &= ~X1205_HR_MIL;
-+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */
-+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
-+ xdata->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
-+ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900;
-+ tm->tm_wday = buf[CCR_WDAY];
-+
-+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ } else {
-+ dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ int datetoo, u8 reg_base)
-+{
-+ int i, err, xfer;
-+
-+ static unsigned char wel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL };
-+
-+
-+ static unsigned char rwel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL | X1205_SR_RWEL };
-+
-+ static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-+
-+ static unsigned char data[3] = { 0, };
-+ static unsigned char buf[8];
-+
-+ struct x1205_data *xdata = i2c_get_clientdata(client);
-+
-+ if ((err = x1205_validate_tm(tm)) < 0)
-+ return err;
-+
-+ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+
-+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
-+ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-+
-+ /* Set 24HR format */
-+ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
-+
-+ if (datetoo == X1205_DATETOO) {
-+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-+
-+ /* month, 0 - 11 */
-+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); /* input is 0-11 */
-+
-+ /* year, since 1900 */
-+ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch));
-+ buf[CCR_WDAY] = tm->tm_wday & 7;
-+ buf[CCR_Y2K] = BIN2BCD(xdata->epoch / 100);
-+ }
-+
-+ xfer = i2c_master_send(client, wel, 3);
-+ dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
-+ return -EIO;
-+
-+ xfer = i2c_master_send(client, rwel, 3);
-+ dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
-+ return -EIO;
-+
-+ for (i = 0; i < 8; i++) {
-+ data[1] = i + reg_base;
-+ data[2] = buf[i];
-+ xfer = i2c_master_send(client, data, 3);
-+
-+ dev_dbg(&client->dev, "%s: xfer %d addr, %02x, data %02x\n",
-+ __FUNCTION__,
-+ xfer, data[1], data[2]);
-+
-+ if (xfer != 3)
-+ return -EIO;
-+ };
-+
-+ xfer = i2c_master_send(client, diswe, 3);
-+ dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer);
-+ if (xfer != 3)
-+ return -EIO;
-+
-+ return 0;
-+}
-+
-+static int x1205_hctosys(struct i2c_client *client)
-+{
-+ int err;
-+
-+ struct rtc_time tm;
-+ struct timespec tv;
-+
-+
-+ err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
-+
-+ if (err)
-+ {
-+ dev_info(&client->adapter->dev,
-+ "%s: Unable to set the system clock\n",
-+ DRIVER_NAME);
-+
-+ return err;
-+
-+ }
-+
-+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether
-+ * it stores the most close value or the value with partial seconds
-+ * truncated, however it is important for x1205_sync_rtc that it be
-+ * defined to store the truncated value. This is because otherwise it
-+ * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the
-+ * sync function, and atomic reads of >32bits on ARM are not possible.
-+ * So storing the most close value would slow down the sync API. So
-+ * Here we have the truncated value and the best guess is to add 0.5s
-+ */
-+
-+ tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+ /* WARNING: this is not the C library 'mktime' call, it is a built in
-+ * inline function from include/linux/time.h. It expects (requires)
-+ * the month to be in the range 1-12
-+ */
-+
-+ tv.tv_sec = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour,
-+ tm.tm_min, tm.tm_sec);
-+
-+ do_settimeofday(&tv);
-+
-+ dev_info(&client->adapter->dev,
-+ "%s: Setting the system clock to %d-%d-%d %d:%d:%d\n",
-+ DRIVER_NAME,
-+ tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour, tm.tm_min,
-+ tm.tm_sec);
-+
-+ return 0;
-+}
-+
-+struct x1205_limit
-+{
-+ unsigned char reg;
-+ unsigned char mask;
-+ unsigned char min;
-+ unsigned char max;
-+};
-+
-+static int x1205_validate_client(struct i2c_client *client)
-+{
-+ int i, xfer;
-+
-+ /* Probe array. We will read the register at the specified
-+ * address and check if the given bits are zero.
-+ */
-+
-+ const unsigned char probe_zero_pattern[] = {
-+
-+ X1205_REG_SR, 0x18,
-+ X1205_REG_Y2K, 0xC6,
-+ X1205_REG_DW, 0xF8,
-+ X1205_REG_MO, 0xE0,
-+ X1205_REG_DT, 0xC0,
-+ X1205_REG_HR, 0x40,
-+ X1205_REG_MN, 0x80,
-+ X1205_REG_SC, 0x80,
-+ X1205_REG_DTR, 0xF8,
-+ X1205_REG_ATR, 0xC0,
-+ X1205_REG_INT, 0x18,
-+ X1205_REG_0, 0xFF,
-+ X1205_REG_Y2K1, 0xC6,
-+ X1205_REG_DWA1, 0x78,
-+ X1205_REG_MOA1, 0x60,
-+ X1205_REG_DTA1, 0x40,
-+ X1205_REG_HRA1, 0x40,
-+ X1205_REG_Y2K0, 0xC6,
-+ X1205_REG_DWA0, 0x78,
-+ X1205_REG_MOA0, 0x60,
-+ X1205_REG_DTA0, 0x40,
-+ X1205_REG_HRA0, 0x40,
-+ };
-+
-+ const struct x1205_limit probe_limits_pattern[] = {
-+ /* register, mask, min, max */
-+ { X1205_REG_Y2K, 0xFF, 19, 20 },
-+ { X1205_REG_DW, 0xFF, 0, 6 },
-+ { X1205_REG_YR, 0xFF, 0, 99 },
-+ { X1205_REG_MO, 0xFF, 0, 12 },
-+ { X1205_REG_DT, 0xFF, 0, 31 },
-+ { X1205_REG_HR, 0x7F, 0, 23 },
-+ { X1205_REG_MN, 0xFF, 0, 59 },
-+ { X1205_REG_SC, 0xFF, 0, 59 },
-+ { X1205_REG_Y2K1, 0xFF, 19, 20 },
-+ { X1205_REG_DWA1, 0x7F, 0, 6 },
-+ { X1205_REG_MOA1, 0x7F, 0, 12 },
-+ { X1205_REG_DTA1, 0x7F, 0, 31 },
-+ { X1205_REG_HRA1, 0x7F, 0, 23 },
-+ { X1205_REG_MNA1, 0x7F, 0, 59 },
-+ { X1205_REG_SCA1, 0x7F, 0, 59 },
-+ { X1205_REG_Y2K0, 0xFF, 19, 20 },
-+ { X1205_REG_DWA0, 0x7F, 0, 6 },
-+ { X1205_REG_MOA0, 0x7F, 0, 12 },
-+ { X1205_REG_DTA0, 0x7F, 0, 31 },
-+ { X1205_REG_HRA0, 0x7F, 0, 23 },
-+ { X1205_REG_MNA0, 0x7F, 0, 59 },
-+ { X1205_REG_SCA0, 0x7F, 0, 59 },
-+ };
-+
-+ /* check that registers have bits a 0 where expected */
-+
-+ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2)
-+ {
-+ unsigned char buf;
-+
-+ static unsigned char addr[2];
-+
-+ struct i2c_msg msgs[2] = {
-+ { client->addr, 0, 2, addr }, /* random read */
-+ { client->addr, I2C_M_RD, 1, &buf },
-+ };
-+
-+ addr[0] = 0x00;
-+ addr[1] = probe_zero_pattern[i];
-+
-+ xfer = i2c_transfer(client->adapter, msgs, 2);
-+
-+ if (xfer != 2) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: could not read register %x\n",
-+ __FUNCTION__, addr[1]);
-+
-+ return -EIO;
-+ }
-+
-+ if ((buf & probe_zero_pattern[i+1]) != 0) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: register %x, zero pattern %d: %x\n",
-+ __FUNCTION__, addr[1], i, buf);
-+
-+ return -ENODEV;
-+ }
-+ }
-+
-+ /* check limits */
-+
-+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++)
-+ {
-+ unsigned char buf, val;
-+
-+ static unsigned char addr[2];
-+
-+ struct i2c_msg msgs[2] = {
-+ { client->addr, 0, 2, addr }, /* random read */
-+ { client->addr, I2C_M_RD, 1, &buf },
-+ };
-+
-+ addr[0] = 0x00;
-+ addr[1] = probe_limits_pattern[i].reg;
-+
-+ xfer = i2c_transfer(client->adapter, msgs, 2);
-+
-+ if (xfer != 2) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: could not read register %x\n",
-+ __FUNCTION__, addr[1]);
-+
-+ return -EIO;
-+ }
-+
-+ val = BCD2BIN(buf & probe_limits_pattern[i].mask);
-+
-+ if (val > probe_limits_pattern[i].max ||
-+ val < probe_limits_pattern[i].min) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: register %x, lim pattern %d: %d\n",
-+ __FUNCTION__, addr[1], i, val);
-+
-+ return -ENODEV;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int x1205_attach(struct i2c_adapter *adapter)
-+{
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ return i2c_probe(adapter, &addr_data, x1205_probe);
-+}
-+
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+ struct i2c_client *new_client;
-+ struct x1205_data *xdata;
-+
-+ int err = 0;
-+
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ /* Fill our data structure */
-+
-+ memset(xdata, 0, sizeof(struct x1205_data));
-+
-+ xdata->epoch = 2000;
-+
-+
-+ /* Prepare i2c_client structure */
-+
-+ new_client = &xdata->client;
-+ i2c_set_clientdata(new_client, xdata);
-+ new_client->addr = address;
-+ new_client->adapter = adapter;
-+ new_client->driver = &x1205_driver;
-+ new_client->flags = 0;
-+
-+ strlcpy(new_client->name, "x1205", I2C_NAME_SIZE);
-+
-+
-+ /* Verify the chip is really an X1205 */
-+
-+ if (kind < 0)
-+ {
-+ if (x1205_validate_client(new_client) < 0) {
-+ err = -ENODEV;
-+ goto exit_kfree;
-+ }
-+ }
-+
-+ /* Inform the i2c layer */
-+ if ((err = i2c_attach_client(new_client)))
-+ goto exit_kfree;
-+
-+ list_add(&xdata->list, &x1205_clients);
-+
-+ dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n",
-+ DRIVER_NAME);
-+
-+ /* If requested, se the system time */
-+ if (hctosys)
-+ x1205_hctosys(new_client);
-+
-+ return 0;
-+
-+exit_kfree:
-+ kfree(xdata);
-+
-+exit:
-+ return err;
-+}
-+
-+static int x1205_detach(struct i2c_client *client)
-+{
-+ int err;
-+ struct x1205_data *data = i2c_get_clientdata(client);
-+
-+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-+
-+ if ((err = i2c_detach_client(client)))
-+ return err;
-+
-+ list_del(&data->list);
-+ kfree(data);
-+ return 0;
-+}
-+
-+/* make sure the rtc_time values are in bounds */
-+static int x1205_validate_tm(struct rtc_time *tm)
-+{
-+ tm->tm_year += 1900;
-+
-+ if (tm->tm_year < EPOCH_1970)
-+ return -EINVAL;
-+
-+ if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
-+ return -EINVAL;
-+
-+ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) &&
-+ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400)))))
-+ return -EINVAL;
-+
-+ if ((tm->tm_year -= EPOCH_1900) > 255)
-+ return -EINVAL;
-+
-+ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm)
-+{
-+ if (client == NULL || tm == NULL)
-+ return -EINVAL;
-+
-+ if (!capable(CAP_SYS_TIME))
-+ return -EACCES;
-+
-+ dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
-+
-+ switch (cmd) {
-+ case X1205_CMD_GETDATETIME:
-+ return x1205_get_datetime(client, tm, X1205_CCR_BASE);
-+
-+ case X1205_CMD_SETTIME:
-+ return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE);
-+
-+ case X1205_CMD_SETDATETIME:
-+ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE);
-+
-+ case X1205_CMD_GETALARM:
-+ return x1205_get_datetime(client, tm, X1205_ALM0_BASE);
-+
-+ case X1205_CMD_SETALARM:
-+ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE);
-+
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+
-+static int __init x1205_init(void)
-+{
-+ return i2c_add_driver(&x1205_driver);
-+}
-+
-+static void __exit x1205_exit(void)
-+{
-+ i2c_del_driver(&x1205_driver);
-+}
-+
-+MODULE_AUTHOR(
-+ "Karen Spearel <kas11@tampabay.rr.com>, "
-+ "Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Xicor X1205 RTC driver");
-+MODULE_LICENSE("GPL");
-+
-+EXPORT_SYMBOL_GPL(x1205_do_command);
-+
-+module_init(x1205_init);
-+module_exit(x1205_exit);
---- linux-2.6.14-rc3/include/linux/x1205.h 1970-01-01 01:00:00.000000000 +0100
-+++ test9/include/linux/x1205.h 2005-10-03 15:38:21.000000000 +0200
-@@ -0,0 +1,67 @@
-+
-+/* commands */
-+
-+#define X1205_CMD_GETDATETIME 0
-+#define X1205_CMD_SETTIME 1
-+#define X1205_CMD_SETDATETIME 2
-+#define X1205_CMD_GETALARM 3
-+#define X1205_CMD_SETALARM 4
-+
-+/* flags */
-+
-+#define X1205_NODATE 0
-+#define X1205_DATETOO 1
-+
-+/* offsets into read buf - add 2 for write buf */
-+
-+#define CCR_SEC 0
-+#define CCR_MIN 1
-+#define CCR_HOUR 2
-+#define CCR_MDAY 3
-+#define CCR_MONTH 4
-+#define CCR_YEAR 5
-+#define CCR_WDAY 6
-+#define CCR_Y2K 7
-+
-+#define X1205_REG_SR 0x3F /* status register */
-+#define X1205_REG_Y2K 0x37
-+#define X1205_REG_DW 0x36
-+#define X1205_REG_YR 0x35
-+#define X1205_REG_MO 0x34
-+#define X1205_REG_DT 0x33
-+#define X1205_REG_HR 0x32
-+#define X1205_REG_MN 0x31
-+#define X1205_REG_SC 0x30
-+#define X1205_REG_DTR 0x13
-+#define X1205_REG_ATR 0x12
-+#define X1205_REG_INT 0x11
-+#define X1205_REG_0 0x10
-+#define X1205_REG_Y2K1 0x0F
-+#define X1205_REG_DWA1 0x0E
-+#define X1205_REG_YRA1 0x0D
-+#define X1205_REG_MOA1 0x0C
-+#define X1205_REG_DTA1 0x0B
-+#define X1205_REG_HRA1 0x0A
-+#define X1205_REG_MNA1 0x09
-+#define X1205_REG_SCA1 0x08
-+#define X1205_REG_Y2K0 0x07
-+#define X1205_REG_DWA0 0x06
-+#define X1205_REG_YRA0 0x05
-+#define X1205_REG_MOA0 0x04
-+#define X1205_REG_DTA0 0x03
-+#define X1205_REG_HRA0 0x02
-+#define X1205_REG_MNA0 0x01
-+#define X1205_REG_SCA0 0x00
-+
-+#define X1205_I2C_BUS_ADDR 0x6f /* hardwired into x1205 */
-+#define X1205_CCR_BASE 0x30 /* Base address of CCR */
-+#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
-+
-+#define X1205_SR_RTCF 0x01
-+#define X1205_SR_WEL 0x02 /* Write Enable Latch bit */
-+#define X1205_SR_RWEL 0x04 /* Register Write Enable Bit */
-+
-+#define X1205_HR_MIL 0x80 /* set in ccr.hour for 24 hr mode */
-+
-+extern int x1205_do_command(unsigned int cmd, void *arg);
-+
+++ /dev/null
---- linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Option
-
- comment "IXP4xx Platforms"
-
-+# This entry is placed on top because otherwise it would have
-+# been shown as a submenu.
-+config MACH_NSLU2
-+ bool
-+ prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
-+ help
-+ Say 'Y' here if you want your kernel to support Linksys's
-+ NSLU2 NAS device. For more information on this platform,
-+ see http://www.nslu2-linux.org
-+
- config ARCH_AVILA
- bool "Avila"
- help
---- linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-@@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
-+obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
-
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,77 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-pci.c
-+ *
-+ * NSLU2 board-level PCI initialization
-+ *
-+ * based on ixdp425-pci.c:
-+ * Copyright (C) 2002 Intel Corporation.
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Maintainer: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach/pci.h>
-+#include <asm/mach-types.h>
-+
-+void __init nslu2_pci_preinit(void)
-+{
-+ set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-+ set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-+ set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
-+
-+ gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
-+ gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
-+ gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
-+
-+ /* INTD is not configured as GPIO is used
-+ * for the power input button.
-+ */
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
-+ IRQ_NSLU2_PCI_INTA,
-+ IRQ_NSLU2_PCI_INTB,
-+ IRQ_NSLU2_PCI_INTC,
-+ };
-+
-+ int irq = -1;
-+
-+ if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
-+ pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
-+ irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES];
-+ }
-+
-+ return irq;
-+}
-+
-+struct hw_pci __initdata nslu2_pci = {
-+ .nr_controllers = 1,
-+ .preinit = nslu2_pci_preinit,
-+ .swizzle = pci_std_swizzle,
-+ .setup = ixp4xx_setup,
-+ .scan = ixp4xx_scan_bus,
-+ .map_irq = nslu2_map_irq,
-+};
-+
-+int __init nslu2_pci_init(void) /* monkey see, monkey do */
-+{
-+ if (machine_is_nslu2())
-+ pci_common_init(&nslu2_pci);
-+
-+ return 0;
-+}
-+
-+subsys_initcall(nslu2_pci_init);
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,92 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-power.c
-+ *
-+ * NSLU2 Power/Reset driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/mach-types.h>
-+
-+extern void ctrl_alt_del(void);
-+
-+static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ /* Signal init to do the ctrlaltdel action, this will bypass init if
-+ * it hasn't started and do a kernel_restart.
-+ */
-+ ctrl_alt_del();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ /* This is the paper-clip reset, it shuts the machine down directly.
-+ */
-+ machine_power_off();
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_power_init(void)
-+{
-+ if (!(machine_is_nslu2()))
-+ return 0;
-+
-+ *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */
-+
-+ set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
-+ set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
-+
-+ gpio_line_isr_clear(NSLU2_RB_GPIO);
-+ gpio_line_isr_clear(NSLU2_PB_GPIO);
-+
-+ if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
-+ SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-+ NSLU2_RB_IRQ);
-+
-+ return -EIO;
-+ }
-+
-+ if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
-+ SA_INTERRUPT, "NSLU2 power button", NULL) < 0) {
-+
-+ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-+ NSLU2_PB_IRQ);
-+
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit nslu2_power_exit(void)
-+{
-+ free_irq(NSLU2_RB_IRQ, NULL);
-+ free_irq(NSLU2_PB_IRQ, NULL);
-+}
-+
-+module_init(nslu2_power_init);
-+module_exit(nslu2_power_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
-+MODULE_LICENSE("GPL");
---- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,134 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-setup.c
-+ *
-+ * NSLU2 board-setup
-+ *
-+ * based ixdp425-setup.c:
-+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
-+ *
-+ * Author: Mark Rakes <mrakes at mac.com>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * Fixed missing init_time in MACHINE_START kas11 10/22/04
-+ * Changed to conform to new style __init ixdp425 kas11 10/22/04
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data nslu2_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource nslu2_flash_resource = {
-+ .start = NSLU2_FLASH_BASE,
-+ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device nslu2_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &nslu2_flash_data,
-+ .num_resources = 1,
-+ .resource = &nslu2_flash_resource,
-+};
-+
-+static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
-+ .sda_pin = NSLU2_SDA_PIN,
-+ .scl_pin = NSLU2_SCL_PIN,
-+};
-+
-+static struct platform_device nslu2_i2c_controller = {
-+ .name = "IXP4XX-I2C",
-+ .id = 0,
-+ .dev.platform_data = &nslu2_i2c_gpio_pins,
-+ .num_resources = 0,
-+};
-+
-+static struct resource nslu2_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port nslu2_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { }
-+};
-+
-+static struct platform_device nslu2_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = nslu2_uart_data,
-+ .num_resources = 2,
-+ .resource = nslu2_uart_resources,
-+};
-+
-+static struct platform_device *nslu2_devices[] __initdata = {
-+ &nslu2_i2c_controller,
-+ &nslu2_flash,
-+ &nslu2_uart,
-+};
-+
-+static void nslu2_power_off(void)
-+{
-+ /* This causes the box to drop the power and go dead. */
-+
-+ /* enable the pwr cntl gpio */
-+ gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
-+
-+ /* do the deed */
-+ gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
-+}
-+
-+static void __init nslu2_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ pm_power_off = nslu2_power_off;
-+
-+ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-+}
-+
-+MACHINE_START(NSLU2, "Linksys NSLU2")
-+ /* Maintainer: www.nslu2-linux.org */
-+ .phys_ram = PHYS_OFFSET,
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
-+ .boot_params = 0x00000100,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .init_machine = nslu2_init,
-+MACHINE_END
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000
-@@ -44,5 +44,6 @@ extern unsigned int processor_id;
- #include "ixdp425.h"
- #include "coyote.h"
- #include "prpmc1100.h"
-+#include "nslu2.h"
-
- #endif /* _ASM_ARCH_HARDWARE_H */
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000
-@@ -93,4 +93,11 @@
- #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
- #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
-
-+/*
-+ * NSLU2 board IRQs
-+ */
-+#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11
-+#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10
-+#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9
-+
- #endif
---- linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,96 @@
-+/*
-+ * include/asm-arm/arch-ixp4xx/nslu2.h
-+ *
-+ * NSLU2 platform specific definitions
-+ *
-+ * Author: Mark Rakes <mrakes AT mac.com>
-+ * Maintainers: http://www.nslu2-linux.org
-+ *
-+ * based on ixdp425.h:
-+ * Copyright 2004 (c) MontaVista, Software, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
-+#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE
-+
-+#define NSLU2_SDA_PIN 7
-+#define NSLU2_SCL_PIN 6
-+
-+/*
-+ * NSLU2 PCI IRQs
-+ */
-+#define NSLU2_PCI_MAX_DEV 3
-+#define NSLU2_PCI_IRQ_LINES 3
-+
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define NSLU2_PCI_INTA_PIN 11
-+#define NSLU2_PCI_INTB_PIN 10
-+#define NSLU2_PCI_INTC_PIN 9
-+#define NSLU2_PCI_INTD_PIN 8
-+
-+
-+/* NSLU2 Timer */
-+#define NSLU2_FREQ 66000000
-+#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+
-+/* GPIO */
-+
-+#define NSLU2_GPIO0 0
-+#define NSLU2_GPIO1 1
-+#define NSLU2_GPIO2 2
-+#define NSLU2_GPIO3 3
-+#define NSLU2_GPIO4 4
-+#define NSLU2_GPIO5 5
-+#define NSLU2_GPIO6 6
-+#define NSLU2_GPIO7 7
-+#define NSLU2_GPIO8 8
-+#define NSLU2_GPIO9 9
-+#define NSLU2_GPIO10 10
-+#define NSLU2_GPIO11 11
-+#define NSLU2_GPIO12 12
-+#define NSLU2_GPIO13 13
-+#define NSLU2_GPIO14 14
-+#define NSLU2_GPIO15 15
-+
-+/* Buttons */
-+
-+#define NSLU2_PB_GPIO NSLU2_GPIO5
-+#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */
-+#define NSLU2_RB_GPIO NSLU2_GPIO12
-+
-+#define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5
-+#define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12
-+
-+#define NSLU2_PB_BM (1L << NSLU2_PB_GPIO)
-+#define NSLU2_PO_BM (1L << NSLU2_PO_GPIO)
-+#define NSLU2_RB_BM (1L << NSLU2_RB_GPIO)
-+
-+/* Buzzer */
-+
-+#define NSLU2_GPIO_BUZZ 4
-+#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
-+/* LEDs */
-+
-+#define NSLU2_LED_RED NSLU2_GPIO0
-+#define NSLU2_LED_GRN NSLU2_GPIO1
-+
-+#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED)
-+#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN)
-+
-+#define NSLU2_LED_DISK1 NSLU2_GPIO2
-+#define NSLU2_LED_DISK2 NSLU2_GPIO3
-+
-+#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2)
-+#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3)
-+
-+
+++ /dev/null
---- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.171472071 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:23:52.923187955 -0700
-@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
--obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
-+obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o
-
---- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:19:43.443489188 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:23:52.923187955 -0700
-@@ -0,0 +1,113 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-rtc.c
-+ *
-+ * NSLU2 RTC driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on x1205-rtc.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/time.h>
-+#include <linux/rtc.h>
-+#include <linux/init.h>
-+
-+#include <linux/x1205.h>
-+
-+#include <asm/rtc.h>
-+#include <asm/mach-types.h>
-+
-+extern int (*set_rtc)(void);
-+
-+static int nslu2_set_rtc(void)
-+{
-+ struct rtc_time new_tm, old_tm;
-+ unsigned long cur_secs = xtime.tv_sec;
-+
-+ if (x1205_do_command(X1205_CMD_GETDATETIME, &old_tm))
-+ return 0;
-+
-+ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */
-+ new_tm.tm_sec = cur_secs % 60;
-+ cur_secs /= 60;
-+ new_tm.tm_min = cur_secs % 60;
-+ cur_secs /= 60;
-+ new_tm.tm_hour = cur_secs % 24;
-+
-+ /*
-+ * avoid writing when we're going to change the day
-+ * of the month. We will retry in the next minute.
-+ * This basically means that if the RTC must not drift
-+ * by more than 1 minute in 11 minutes.
-+ */
-+ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
-+ (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
-+ return 1;
-+
-+ return x1205_do_command(X1205_CMD_SETTIME, &new_tm);
-+}
-+
-+static int rtc_read_alarm(struct rtc_wkalrm *alrm)
-+{
-+ return x1205_do_command(X1205_CMD_GETALARM, &alrm->time);
-+}
-+
-+static int rtc_set_alarm(struct rtc_wkalrm *alrm)
-+{
-+ return x1205_do_command(X1205_CMD_SETALARM, &alrm->time);
-+}
-+
-+static int rtc_read_time(struct rtc_time *tm)
-+{
-+ return x1205_do_command(X1205_CMD_GETDATETIME, tm);
-+}
-+
-+static int rtc_set_time(struct rtc_time *tm)
-+{
-+ return x1205_do_command(X1205_CMD_SETDATETIME, tm);
-+}
-+
-+static struct rtc_ops rtc_ops = {
-+ .owner = THIS_MODULE,
-+ .read_time = rtc_read_time,
-+ .set_time = rtc_set_time,
-+ .read_alarm = rtc_read_alarm,
-+ .set_alarm = rtc_set_alarm,
-+};
-+
-+static int __init nslu2_rtc_init(void)
-+{
-+ int ret;
-+
-+ if (!(machine_is_nslu2()))
-+ return 0;
-+
-+ printk(KERN_INFO "NSLU2: rtc\n");
-+
-+ if ((ret = register_rtc(&rtc_ops)) != 0)
-+ return ret;
-+
-+ set_rtc = nslu2_set_rtc;
-+
-+ return 0;
-+}
-+
-+static void __exit nslu2_rtc_exit(void)
-+{
-+ set_rtc = NULL;
-+
-+ unregister_rtc(&rtc_ops);
-+}
-+
-+module_init(nslu2_rtc_init);
-+module_exit(nslu2_rtc_exit);
+++ /dev/null
---- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Kconfig 2005-08-28 16:41:01.000000000 -0700
-+++ linux-2.6.13/drivers/input/misc/Kconfig 2005-10-26 15:24:01.199708764 -0700
-@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
- tristate "M68k Beeper support"
- depends on M68K
-
-+config INPUT_NSLU2_BEEPER
-+ tristate "NSLU2 Beeper support"
-+ depends on MACH_NSLU2
-+ help
-+ Say Y here if you want the embedded beeper on the LinkSys NSLU2
-+ to be used for bells and whistles.
-+
-+ If unsure, say Y.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called nslu2spkr.
-+
- config INPUT_UINPUT
- tristate "User level driver support"
- help
---- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Makefile 2005-08-28 16:41:01.000000000 -0700
-+++ linux-2.6.13/drivers/input/misc/Makefile 2005-10-26 15:24:01.199708764 -0700
-@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68ksp
- obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o
- obj-$(CONFIG_INPUT_UINPUT) += uinput.o
- obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
-+obj-$(CONFIG_INPUT_NSLU2_BEEPER) += nslu2spkr.o
---- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/nslu2spkr.c 2005-10-26 15:19:43.711506053 -0700
-+++ linux-2.6.13/drivers/input/misc/nslu2spkr.c 2005-10-26 15:24:01.199708764 -0700
-@@ -0,0 +1,144 @@
-+/*
-+ * drivers/input/misc/nslu2spkr.c
-+ *
-+ * NSLU2 Beeper driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+static unsigned int beep_on_startup = 1;
-+module_param(beep_on_startup, bool, 0);
-+MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup");
-+
-+DEFINE_SPINLOCK(beep_lock);
-+
-+static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-+{
-+ unsigned int count = 0;
-+ unsigned long flags;
-+
-+ if (type != EV_SND)
-+ return -1;
-+
-+ switch (code) {
-+ case SND_BELL:
-+ if (value) value = 1000;
-+ case SND_TONE:
-+ break;
-+ default:
-+ return -1;
-+ }
-+
-+ if (value > 20 && value < 32767)
-+ count = (NSLU2_FREQ / (value*4)) - 1;
-+
-+ spin_lock_irqsave(&beep_lock, flags);
-+
-+ if (count) {
-+
-+ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT);
-+ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW);
-+
-+ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+
-+ } else {
-+
-+ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN);
-+ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH);
-+
-+ *IXP4XX_OSRT2 = 0;
-+ }
-+
-+ spin_unlock_irqrestore(&beep_lock, flags);
-+
-+ return 0;
-+}
-+
-+static struct input_dev nslu2_spkr_dev = {
-+ .phys = "ixp420/gpio4",
-+ .name = "NSLU2 Beeper",
-+ .evbit[0] = BIT(EV_SND),
-+ .sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE),
-+ .event = nslu2_spkr_event,
-+ .id = {
-+ .bustype = BUS_HOST,
-+ .vendor = 0x001f,
-+ .product = 0x0001,
-+ .version = 0x0100
-+ }
-+};
-+
-+static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ /* clear interrupt */
-+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
-+
-+ /* flip the beeper output */
-+ *IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM;
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_spkr_init(void)
-+{
-+ if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler,
-+ SA_INTERRUPT | SA_TIMER, "NSLU2 beeper", NULL < 0)) {
-+
-+ printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n",
-+ IRQ_IXP4XX_TIMER2);
-+
-+ return -EIO;
-+ }
-+
-+ input_register_device(&nslu2_spkr_dev);
-+
-+ /* do a little beep to tell the world we are alive */
-+ if (beep_on_startup)
-+ {
-+ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440);
-+ msleep(120);
-+ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0);
-+ }
-+
-+ printk(KERN_INFO "NSLU2: beeper\n");
-+ return 0;
-+}
-+
-+static void __exit nslu2_spkr_exit(void)
-+{
-+ input_unregister_device(&nslu2_spkr_dev);
-+
-+ disable_irq(IRQ_IXP4XX_TIMER2);
-+
-+ /* turn it off */
-+ nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0);
-+
-+ free_irq(IRQ_IXP4XX_TIMER2, NULL);
-+}
-+
-+module_init(nslu2_spkr_init);
-+module_exit(nslu2_spkr_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Beeper driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
---- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.443489188 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:08.652177718 -0700
-@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
--obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o
-+obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
-
---- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:19:43.979522918 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:24:08.652177718 -0700
-@@ -0,0 +1,548 @@
-+//=============================================================================
-+//
-+// n2-io.c version 0.1.7
-+// Author: Karen Spearel <kas11 at tampabay.rr.com>
-+// please report problems/bugs directly to the address above
-+//
-+// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per
-+// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk
-+//
-+// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD,
-+// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT
-+// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER
-+// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS.
-+//
-+//=============================================================================
-+// GPIO Function State
-+// 0 Red LED Status
-+// 1 Green LED Ready = 1
-+// 2 Disk 2 LED On = 0
-+// 3 Disk 1 LED On = 0
-+// 4 Buzzer
-+// 5 Power Button Pressed = 1
-+// 8 Power Down Output = 1 powers down NSLU2
-+// 12 Reset Pressed = 0
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/proc_fs.h>
-+#include <linux/device.h>
-+#include <linux/reboot.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm-arm/irq.h>
-+#include <asm-arm/delay.h>
-+
-+/* Set this to 1 to output lots of debug messages. */
-+#define NSLU2_IO_DEBUG 0
-+
-+#if NSLU2_IO_DEBUG
-+#define nslu2_io_debug(args) printk args
-+#else
-+#define nslu2_io_debug(args) ((void)0)
-+#endif
-+
-+#define VERSION "0.1.7"
-+
-+#define NSLU2BZ_MAJOR 62 //buzzer
-+#define NSLU2LM_MAJOR 126
-+
-+
-+#define NSLU2_BEEP_DUR_LONG 2000
-+#define NSLU2_BEEP_DUR_MED 400
-+#define NSLU2_BEEP_DUR_SHORT 100
-+#define NSLU2_BEEP_PITCH_HIGH 250
-+#define NSLU2_BEEP_PITCH_MED 500
-+#define NSLU2_BEEP_PITCH_LOW 1000
-+#define NSLU2_LONG_DELAY 30000
-+
-+#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
-+
-+// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe
-+
-+#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible
-+#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults
-+#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults
-+#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000
-+#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies
-+#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies
-+#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever
-+#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long
-+
-+#define NSLU2LM_OFF _IOW('M',32,long)
-+#define NSLU2LM_ON _IOW('M',33,long)
-+#define NSLU2LM_BLINK _IOW('M',34,long)
-+#define NSLU2LM_ALT _IOW('M',35,long)
-+#define NSLU2LM_ALL_ON _IO('M',36)
-+#define NSLU2LM_ALL_OFF _IO('M',37)
-+
-+#define PHYS_LEDS 4
-+#define BLINK_DELAY 25
-+
-+// OR Masks to turn these LEDs ON
-+
-+#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010
-+#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001
-+#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011
-+
-+// AND Masks to turn these LEDs OFF
-+
-+#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101
-+#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110
-+#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100
-+
-+// AND Masks to turn these LEDs ON
-+
-+#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
-+#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
-+
-+// Or Masks to turn these LEDs OFF
-+
-+#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
-+#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
-+
-+// EOR masks for toggling LEDs on/off
-+
-+#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits
-+#define RS_GRN_TGL 0x00000002
-+#define RS_RED_TGL 0x00000001
-+#define DISK1_TGL 0x00000008
-+#define DISK2_TGL 0x00000004
-+
-+// The LED names for switches
-+
-+#define LED_RS_RED 0
-+#define LED_RS_GRN 1
-+#define LED_DISK1 2
-+#define LED_DISK2 3
-+#define LED_ALL 4
-+
-+static unsigned long ontime = 50;
-+static unsigned long offtime = 450;
-+static unsigned long bz_repeatcnt = 10;
-+static unsigned long tone = 1000;
-+
-+static struct timer_list n2lm_rsg_timer; //rs green
-+static struct timer_list n2lm_rsr_timer; //rs red
-+static struct timer_list n2lm_d1_timer; //drive 1
-+static struct timer_list n2lm_d2_timer; //drive 2
-+static struct timer_list n2bz_timer; //beeper
-+
-+// sysfs class
-+static struct class *n2lm_class;
-+
-+//==================================================================================================
-+//
-+// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the
-+// GPIO output register is xor'd with a mask corresponding to the selected led which simply
-+// flips that bit. No record of what any of the other leds is doing is needed.
-+//
-+//==================================================================================================
-+// this blinks rs green or green/yellow if rs red is on
-+#ifndef CONFIG_LEDS
-+static void n2lm_rsg_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led
-+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout
-+ add_timer(&n2lm_rsg_timer); //reinit timer
-+ return;
-+}
-+
-+// this blinks or alternates rs red green... inited wit green on/red off
-+static void n2lm_rsr_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data;
-+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsr_timer);
-+ return;
-+}
-+// blinks disk 1
-+static void n2lm_d1_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL;
-+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d1_timer);
-+ return;
-+}
-+// blinks disk 2
-+static void n2lm_d2_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL;
-+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d2_timer);
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_start(unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led));
-+
-+ switch(led) {
-+ case LED_RS_RED:
-+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsr_timer);
-+ break;
-+
-+ case LED_RS_GRN:
-+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsg_timer);
-+ break;
-+
-+ case LED_DISK1:
-+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d1_timer);
-+ break;
-+
-+ case LED_DISK2:
-+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d2_timer);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_stop(unsigned long led)
-+{
-+ switch (led) {
-+ case LED_RS_RED:
-+ del_timer(&n2lm_rsr_timer);
-+ break;
-+ case LED_RS_GRN:
-+ del_timer(&n2lm_rsg_timer);
-+ break;
-+ case LED_DISK1:
-+ del_timer(&n2lm_d1_timer);
-+ break;
-+ case LED_DISK2:
-+ del_timer(&n2lm_d2_timer);
-+ break;
-+ default:
-+ break;
-+ }
-+ return;
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_timer_stop_all(void)
-+{
-+ del_timer(&n2lm_rsg_timer);
-+ del_timer(&n2lm_rsr_timer);
-+ del_timer(&n2lm_d1_timer);
-+ del_timer(&n2lm_d2_timer);
-+ return;
-+}
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledon(unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led));
-+
-+ switch (led) {
-+ case LED_RS_RED:
-+ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1
-+ return;
-+ case LED_RS_GRN:
-+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2
-+ return;
-+ case LED_DISK1:
-+ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7
-+ return;
-+ case LED_DISK2:
-+ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb
-+ return;
-+ case LED_ALL: //all green
-+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;
-+ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON);
-+ return;
-+ }
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledoff(unsigned long led)
-+{
-+
-+ switch (led) {
-+ case LED_RS_RED:
-+ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe
-+ return;
-+ case LED_RS_GRN:
-+ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd
-+ return;
-+ case LED_DISK1:
-+ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008
-+ return;
-+ case LED_DISK2:
-+ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004
-+ return;
-+ case LED_ALL:
-+ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF);
-+ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF);
-+ }
-+}
-+
-+//==================================================================================================
-+
-+static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led));
-+
-+ if (led < 0 || led >= PHYS_LEDS)
-+ return -EINVAL;
-+
-+ switch (cmd ) {
-+ case NSLU2LM_ON:
-+ n2lm_timer_stop(led);
-+ n2lm_ledon(led);
-+ break;
-+
-+ case NSLU2LM_OFF:
-+ n2lm_timer_stop(led);
-+ n2lm_ledoff(led);
-+ break;
-+
-+ case NSLU2LM_BLINK:
-+ n2lm_ledon(led);
-+ if (led == LED_RS_RED)
-+ n2lm_rsr_timer.data = RS_RED_TGL;
-+ n2lm_timer_start(led);
-+ break;
-+
-+ case NSLU2LM_ALT:
-+ if (led == LED_RS_RED)
-+ {
-+ n2lm_ledon(LED_RS_GRN);
-+ n2lm_ledoff(LED_RS_RED);
-+ n2lm_rsr_timer.data = RS_RG_ALT;
-+ n2lm_timer_start(LED_RS_RED);
-+ break;
-+ } else
-+ return -EINVAL;
-+
-+ case NSLU2LM_ALL_ON:
-+ n2lm_timer_stop_all();
-+ n2lm_ledon(LED_ALL);
-+ break;
-+
-+ case NSLU2LM_ALL_OFF:
-+ n2lm_timer_stop_all();
-+ n2lm_ledoff(LED_ALL);
-+ break;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct file_operations n2lm_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = n2lm_ioctl,
-+};
-+#endif
-+//==================================================================================================
-+// We can't do anything fancy here since the system tick rate is far below that required to
-+// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until
-+// I get up to speed on the timers. The saving grace is that for the normal uses, nothing
-+// important should be haprepening.
-+//==================================================================================================
-+
-+static void n2_buzz(int tone_delay, int duration)
-+{
-+ int i;
-+
-+ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
-+
-+ for (i = 1; i < duration; i++) {
-+ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
-+ udelay(tone_delay);
-+ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
-+ udelay(tone_delay);
-+ }
-+ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
-+
-+ return;
-+}
-+//=================================================================================================
-+
-+// this handles the buzzer duty cycle
-+static void n2bz_handler(unsigned long data)
-+{
-+ if (--bz_repeatcnt > 0) { //if just one beep left to do
-+ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout
-+ add_timer(&n2bz_timer); //reinit timer
-+ }
-+ n2_buzz(tone/2, ontime);
-+ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime));
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param)
-+{
-+ switch (cmd) {
-+ case NSLU2BZ_BEEP:
-+ n2_buzz(tone/2, ontime);
-+ break;
-+
-+ case NSLU2BZ_BEEP_STOP:
-+ del_timer(&n2bz_timer);
-+ break;
-+
-+ case NSLU2BZ_BEEPS:
-+ if (param == 0)
-+ bz_repeatcnt = 0xffffffff;
-+ else
-+ bz_repeatcnt = param;
-+ n2bz_handler(0);
-+ break;
-+
-+ case NSLU2BZ_TONESET:
-+ if (param >= 250 && param <= 2000)
-+ tone = param;
-+ break;
-+
-+ case NSLU2BZ_ONTIME:
-+ if (param > 4 && param < 201)
-+ ontime = param;
-+ break;
-+
-+ case NSLU2BZ_SILENTTIME:
-+ if (param > ontime) //enforce a reasonable duty cycle
-+ offtime = param;
-+ else
-+ offtime = ontime;
-+ break;
-+
-+ case NSLU2BZ_REPEATCNT:
-+ if (param == 0)
-+ bz_repeatcnt = 0xffffffff;
-+ else
-+ bz_repeatcnt = param;
-+ break;
-+
-+ case NSLU2BZ_COMBINED:
-+ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16
-+ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies
-+ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies
-+ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ return 0;
-+}
-+
-+static struct file_operations n2bz_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = n2bz_ioctl,
-+};
-+
-+static void n2iom_initarch(void)
-+{
-+#ifndef CONFIG_LEDS
-+ init_timer(&n2lm_rsg_timer);
-+ init_timer(&n2lm_rsr_timer);
-+ init_timer(&n2lm_d1_timer);
-+ init_timer(&n2lm_d2_timer);
-+
-+ n2lm_rsr_timer.function = n2lm_rsr_handler;
-+ n2lm_rsg_timer.function = n2lm_rsg_handler;
-+ n2lm_d2_timer.function = n2lm_d2_handler;
-+ n2lm_d1_timer.function = n2lm_d1_handler;
-+#endif
-+
-+ init_timer(&n2bz_timer);
-+ n2bz_timer.function = n2bz_handler;
-+
-+ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0;
-+
-+#ifndef CONFIG_LEDS
-+ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3
-+ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds
-+ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc;
-+ n2lm_ledon(LED_ALL);
-+ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT);
-+ n2lm_ledoff(LED_ALL);
-+
-+ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit
-+ n2lm_ledon(LED_RS_RED);
-+#endif
-+
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static int __init n2iom_init(void)
-+{
-+ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
-+
-+ n2iom_initarch();
-+
-+ n2lm_class = class_create(THIS_MODULE, "nslu2");
-+
-+#ifndef CONFIG_LEDS
-+ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) {
-+ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR);
-+ return -EBUSY;
-+ }
-+ else {
-+ class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
-+ }
-+#endif
-+
-+ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) {
-+ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR);
-+ return -EBUSY;
-+ }
-+ else {
-+ class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
-+ }
-+
-+ return 0;
-+}
-+
-+//==================================================================================================
-+
-+static void __exit n2iom_exit(void)
-+{
-+
-+#ifndef CONFIG_LEDS
-+ del_timer(&n2lm_rsg_timer);
-+ del_timer(&n2lm_rsr_timer);
-+ del_timer(&n2lm_d1_timer);
-+ del_timer(&n2lm_d2_timer);
-+
-+ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" );
-+ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0));
-+#endif
-+
-+ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz");
-+ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0));
-+
-+ class_destroy(n2lm_class);
-+}
-+
-+module_init(n2iom_init);
-+module_exit(n2iom_exit);
-+
-+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>");
-+MODULE_DESCRIPTION("NSLU2 I/O driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
---- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/Kconfig 2005-10-26 15:19:34.490925838 -0700
-+++ linux-2.6.13/arch/arm/Kconfig 2005-10-26 15:24:18.628805508 -0700
-@@ -389,7 +389,8 @@ config LEDS
- ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
- ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
- ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
-- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
-+ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-+ MACH_NSLU2
- help
- If you say Y here, the LEDs on your machine will be used
- to provide useful information about your current system status.
-@@ -403,7 +404,7 @@ config LEDS
-
- config LEDS_TIMER
- bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
-- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2
- depends on LEDS
- default y if ARCH_EBSA110
- help
-@@ -419,7 +420,8 @@ config LEDS_TIMER
-
- config LEDS_CPU
- bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
-- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \
-+ || MACH_NSLU2
- depends on LEDS
- help
- If you say Y here, the red LED will be used to give a good real
---- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.979522918 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:18.632805759 -0700
-@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
-
-+leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o
-+obj-$(CONFIG_LEDS) += $(leds-y)
-+
-+
---- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:19:44.251540035 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:24:18.632805759 -0700
-@@ -0,0 +1,223 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-leds.c
-+ *
-+ * NSLU2 LEDs driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ * and arch/arm/mach-footbridge/netwinder-leds.c
-+ * Copyright (C) 1998-1999 Russell King
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+#include <linux/notifier.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/system.h>
-+
-+#define LED_STATE_ENABLED 0x01
-+#define LED_STATE_CLAIMED 0x02
-+#define LED_STATE_IDLE 0x04
-+
-+static unsigned char led_state;
-+static unsigned int hw_led_state;
-+
-+static const unsigned long idle_seq[4] = {
-+
-+ NSLU2_LED_GRN_BM, 0,
-+ NSLU2_LED_GRN_BM, 0,
-+};
-+
-+static const unsigned long busy_seq[4] = {
-+
-+ NSLU2_LED_GRN_BM, 0,
-+ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0,
-+};
-+
-+static unsigned char led_count = 0;
-+
-+static DEFINE_SPINLOCK(leds_lock);
-+extern spinlock_t gpio_lock;
-+
-+static void nslu2_leds_event(led_event_t evt)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&leds_lock, flags);
-+
-+ switch (evt) {
-+ case led_start:
-+ /* Let's rock! Red led on, all others off. Remember
-+ * that disk1/disk2 works inverted. On the NSLU2, the
-+ * interface starts in a claimed state. XXX
-+ */
-+ led_state = LED_STATE_ENABLED | LED_STATE_CLAIMED;
-+ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM
-+ | NSLU2_LED_RED_BM;
-+ break;
-+
-+ case led_stop:
-+ led_state &= ~LED_STATE_ENABLED;
-+ break;
-+
-+ case led_claim:
-+ /* The user claimed the interface, red and green off */
-+ led_state |= LED_STATE_CLAIMED;
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_release:
-+ /* The user released the interface, preserve the last
-+ * status of the leds, except red/green.
-+ */
-+ led_state &= ~LED_STATE_CLAIMED;
-+ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C;
-+ break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+ case led_timer:
-+ /* Pulse green led */
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ {
-+ /* clear red and green bits */
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+
-+ /* copy the right sequence in */
-+ if (led_state & LED_STATE_IDLE)
-+ hw_led_state |= idle_seq[led_count % 4];
-+ else
-+ hw_led_state |= busy_seq[led_count % 4];
-+
-+ led_count++;
-+ }
-+ break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+
-+ case led_idle_start:
-+ led_state |= LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+ /* green on, red off */
-+ hw_led_state |= NSLU2_LED_GRN_BM;
-+ hw_led_state &= ~NSLU2_LED_RED_BM;
-+#endif
-+ break;
-+
-+ case led_idle_end:
-+ led_state &= ~LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+ /* green on, red on -> amber on */
-+ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM;
-+#endif
-+ break;
-+#endif
-+
-+ case led_halted:
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ hw_led_state |= NSLU2_LED_RED_BM;
-+ break;
-+
-+ /* leds */
-+
-+ case led_green_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= NSLU2_LED_GRN_BM;
-+ break;
-+
-+ case led_green_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~NSLU2_LED_GRN_BM;
-+ break;
-+
-+ case led_amber_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_amber_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_red_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= NSLU2_LED_RED_BM;
-+ break;
-+
-+ case led_red_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~NSLU2_LED_RED_BM;
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ spin_unlock_irqrestore(&leds_lock, flags);
-+
-+ if (led_state & LED_STATE_ENABLED) {
-+ spin_lock_irqsave(&gpio_lock, flags);
-+ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state;
-+ spin_unlock_irqrestore(&gpio_lock, flags);
-+ }
-+}
-+
-+static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event,
-+ void *ptr)
-+{
-+ leds_event(led_green_off);
-+ leds_event(led_red_on);
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block nslu2_leds_panic_block = {
-+ .notifier_call = nslu2_leds_panic_event,
-+};
-+
-+static int __init nslu2_leds_init(void)
-+{
-+ if (!(machine_is_nslu2()))
-+ return 0;
-+
-+ printk(KERN_INFO "NSLU2: leds\n");
-+
-+ /* register panic notifier */
-+ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block);
-+
-+ /* enable gpio 0-3 */
-+ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT);
-+
-+ leds_event = nslu2_leds_event;
-+
-+ /* this will also initialize the leds to the
-+ * default state.
-+ */
-+
-+ leds_event(led_start);
-+
-+ return 0;
-+}
-+
-+module_init(nslu2_leds_init);
-+
+++ /dev/null
---- linux-2.6.13/.pc/90-ixp4xx-pci-le.patch/arch/arm/mach-ixp4xx/common-pci.c 2005-08-28 16:41:01.000000000 -0700
-+++ linux-2.6.13/arch/arm/mach-ixp4xx/common-pci.c 2005-10-26 15:24:30.337542292 -0700
-@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void)
- #ifdef __ARMEB__
- *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
- #else
-- *PCI_CSR = PCI_CSR_IC;
-+ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
- #endif
-
- pr_debug("DONE\n");
+++ /dev/null
-*** linux-2.6.13/drivers/usb/net/pegasus.h.orig Mon Aug 29 01:41:01 2005
---- linux-2.6.13/drivers/usb/net/pegasus.h Sat Oct 22 20:51:29 2005
-***************
-*** 181,186 ****
---- 181,188 ----
- DEFAULT_GPIO_RESET )
- PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
- DEFAULT_GPIO_RESET | PEGASUS_II )
-+ PEGASUS_DEV( "Philips CPWUE01/00 USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
-+ DEFAULT_GPIO_RESET | PEGASUS_II )
- PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
- VENDOR_ADMTEK, 0x8511,
- DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov 28 18:53:25 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-CONFIG_MACH_NSLU2=y
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MACLIST=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_X1205=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-# CONFIG_VIDEO_SAA6588 is not set
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_OVCAMCHIP=m
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
-http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3218/1
-
-PAGE_SHIFT is undeclared in include/asm-arm/arch-ixp4xx/memory.h, identified by the following kernel compilation error:
-
-CC [M] sound/core/memory.o
-In file included from include/asm/memory.h:27,
-from include/asm/io.h:28,
-from sound/core/memory.c:24:
-include/asm/arch/memory.h: In function `__arch_adjust_zones':
-include/asm/arch/memory.h:28: error: `PAGE_SHIFT' undeclared (first use
-in this function)
-
-This patch replaces my previous attempt at fixing this problem (Patch 3214/1) and is based on the following feedback:
-
-Russell King wrote:
-> The error you see came up on SA1100. The best solution was to move
-> the __arch_adjust_zones() function out of line. I suggest ixp4xx
-> does the same.
-
-I have moved the function out of line into arch/arm/mach-ixp4xx/common-pci.c as suggested.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-
---- linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h~ 2005-12-30 05:18:27.000000000 +1030
-+++ linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h 2005-12-30 05:36:04.000000000 +1030
-@@ -16,31 +16,10 @@
-
- #ifndef __ASSEMBLY__
-
--/*
-- * Only first 64MB of memory can be accessed via PCI.
-- * We use GFP_DMA to allocate safe buffers to do map/unmap.
-- * This is really ugly and we need a better way of specifying
-- * DMA-capable regions of memory.
-- */
--static inline void __arch_adjust_zones(int node, unsigned long *zone_size,
-- unsigned long *zhole_size)
--{
-- unsigned int sz = SZ_64M >> PAGE_SHIFT;
--
-- /*
-- * Only adjust if > 64M on current system
-- */
-- if (node || (zone_size[0] <= sz))
-- return;
--
-- zone_size[1] = zone_size[0] - sz;
-- zone_size[0] = sz;
-- zhole_size[1] = zhole_size[0];
-- zhole_size[0] = 0;
--}
-+void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
-
- #define arch_adjust_zones(node, size, holes) \
-- __arch_adjust_zones(node, size, holes)
-+ ixp4xx_adjust_zones(node, size, holes)
-
- #define ISA_DMA_THRESHOLD (SZ_64M - 1)
-
---- linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c~ 2005-12-30 05:16:03.000000000 +1030
-+++ linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c 2005-12-30 05:43:55.000000000 +1030
-@@ -341,6 +341,29 @@ int dma_needs_bounce(struct device *dev,
- return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
- }
-
-+/*
-+ * Only first 64MB of memory can be accessed via PCI.
-+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
-+ * This is really ugly and we need a better way of specifying
-+ * DMA-capable regions of memory.
-+ */
-+void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
-+ unsigned long *zhole_size)
-+{
-+ unsigned int sz = SZ_64M >> PAGE_SHIFT;
-+
-+ /*
-+ * Only adjust if > 64M on current system
-+ */
-+ if (node || (zone_size[0] <= sz))
-+ return;
-+
-+ zone_size[1] = zone_size[0] - sz;
-+ zone_size[0] = sz;
-+ zhole_size[1] = zhole_size[0];
-+ zhole_size[0] = 0;
-+}
-+
- void __init ixp4xx_pci_preinit(void)
- {
- unsigned long processor_id;
+++ /dev/null
-drivers/mtd/redboot.c: recognise a foreign byte sex partition table
-
-The RedBoot boot loader writes flash partition tables containing native
-byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an
-LE kernel from BE RedBoot) the current MTD driver fails to handle the
-partition table and therefore is unable to generate the correct partition
-map for the flash.
-
-The patch recognises that the FIS directory (the partition table) is
-byte-reversed by examining the partition table size, which is known to be
-one erase block (this is an assumption made elsewhere in redboot.c). If
-the size matches the erase block after byte swapping the value then
-byte-reversal is assumed, if not no further action is taken. The patched
-code is fail safe; should redboot.c be changed to support a partition table
-with a modified size field the test will fail and the partition table will
-be assumed to have the host byte sex.
-
-If byte-reversal is detected the patch byte swaps the remainder of the 32
-bit fields in the copy of the table; this copy is then used to set up the
-MTD partition map.
-
-Signed-off-by: John Bowler <jbowler@acm.org>
-Signed-off-by: Andrew Morton <akpm@osdl.org>
-Modified slightly and
-Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
-Index: drivers/mtd/redboot.c
-===================================================================
-RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v
-retrieving revision 1.18
-retrieving revision 1.19
-diff -u -p -r1.18 -r1.19
---- linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
-@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru
- i = numslots;
- break;
- }
-- if (!memcmp(buf[i].name, "FIS directory", 14))
-+ if (!memcmp(buf[i].name, "FIS directory", 14)) {
-+ /* This is apparently the FIS directory entry for the
-+ * FIS directory itself. The FIS directory size is
-+ * one erase block; if the buf[i].size field is
-+ * swab32(erasesize) then we know we are looking at
-+ * a byte swapped FIS directory - swap all the entries!
-+ * (NOTE: this is 'size' not 'data_length'; size is
-+ * the full size of the entry.)
-+ */
-+ if (swab32(buf[i].size) == master->erasesize) {
-+ int j;
-+ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
-+ /* The unsigned long fields were written with the
-+ * wrong byte sex, name and pad have no byte sex.
-+ */
-+ swab32s(&buf[j].flash_base);
-+ swab32s(&buf[j].mem_base);
-+ swab32s(&buf[j].size);
-+ swab32s(&buf[j].entry_point);
-+ swab32s(&buf[j].data_length);
-+ swab32s(&buf[j].desc_cksum);
-+ swab32s(&buf[j].file_cksum);
-+ }
-+ }
- break;
-+ }
- }
- if (i == numslots) {
- /* Didn't find it */
-
-
+++ /dev/null
---- linux-2.6.15/fs/Kconfig~ 2006-01-03 13:51:10.000000000 +1030
-+++ linux-2.6.15/fs/Kconfig 2006-01-05 01:35:36.000000000 +1030
-@@ -1132,6 +1132,31 @@ config JFFS2_CMODE_SIZE
-
- endchoice
-
-+choice
-+ prompt "JFFS2 endianness"
-+ default JFFS2_NATIVE_ENDIAN
-+ depends on JFFS2_FS
-+ help
-+ You can set here the default endianness of JFFS2 from
-+ the available options. Don't touch if unsure.
-+
-+config JFFS2_NATIVE_ENDIAN
-+ bool "native endian"
-+ help
-+ Uses a native endian bytestream.
-+
-+config JFFS2_BIG_ENDIAN
-+ bool "big endian"
-+ help
-+ Uses a big endian bytestream.
-+
-+config JFFS2_LITTLE_ENDIAN
-+ bool "little endian"
-+ help
-+ Uses a little endian bytestream.
-+
-+endchoice
-+
- config CRAMFS
- tristate "Compressed ROM file system support (cramfs)"
- select ZLIB_INFLATE
---- linux-2.6.15/fs/jffs2/nodelist.h~ 2006-01-05 01:37:06.000000000 +1030
-+++ linux-2.6.15/fs/jffs2/nodelist.h 2006-01-05 01:37:54.000000000 +1030
-@@ -29,12 +29,10 @@
- #include "os-linux.h"
- #endif
-
--#define JFFS2_NATIVE_ENDIAN
--
- /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from
- whatever OS we're actually running on here too. */
-
--#if defined(JFFS2_NATIVE_ENDIAN)
-+#if defined(CONFIG_JFFS2_NATIVE_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){x})
- #define cpu_to_je32(x) ((jint32_t){x})
- #define cpu_to_jemode(x) ((jmode_t){os_to_jffs2_mode(x)})
-@@ -42,7 +40,7 @@
- #define je16_to_cpu(x) ((x).v16)
- #define je32_to_cpu(x) ((x).v32)
- #define jemode_to_cpu(x) (jffs2_to_os_mode((x).m))
--#elif defined(JFFS2_BIG_ENDIAN)
-+#elif defined(CONFIG_JFFS2_BIG_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){cpu_to_be16(x)})
- #define cpu_to_je32(x) ((jint32_t){cpu_to_be32(x)})
- #define cpu_to_jemode(x) ((jmode_t){cpu_to_be32(os_to_jffs2_mode(x))})
-@@ -50,7 +48,7 @@
- #define je16_to_cpu(x) (be16_to_cpu(x.v16))
- #define je32_to_cpu(x) (be32_to_cpu(x.v32))
- #define jemode_to_cpu(x) (be32_to_cpu(jffs2_to_os_mode((x).m)))
--#elif defined(JFFS2_LITTLE_ENDIAN)
-+#elif defined(CONFIG_JFFS2_LITTLE_ENDIAN)
- #define cpu_to_je16(x) ((jint16_t){cpu_to_le16(x)})
- #define cpu_to_je32(x) ((jint32_t){cpu_to_le32(x)})
- #define cpu_to_jemode(x) ((jmode_t){cpu_to_le32(os_to_jffs2_mode(x))})
+++ /dev/null
---- linux-nslu2.orig/include/linux/rtc.h 2006-01-03 15:31:18.000000000 +0100
-+++ linux-nslu2/include/linux/rtc.h 2006-01-03 15:34:24.000000000 +0100
-@@ -91,8 +91,81 @@ struct rtc_pll_info {
- #define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
- #define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
-
-+/* interrupt flags */
-+#define RTC_IRQF 0x80 /* any of the following is active */
-+#define RTC_PF 0x40
-+#define RTC_AF 0x20
-+#define RTC_UF 0x10
-+
- #ifdef __KERNEL__
-
-+#include <linux/device.h>
-+#include <linux/seq_file.h>
-+#include <linux/cdev.h>
-+#include <linux/poll.h>
-+
-+struct rtc_class_ops {
-+ int (*open)(struct device *);
-+ void (*release)(struct device *);
-+ int (*ioctl)(struct device *, unsigned int, unsigned long);
-+ int (*read_time)(struct device *, struct rtc_time *);
-+ int (*set_time)(struct device *, struct rtc_time *);
-+ int (*read_alarm)(struct device *, struct rtc_wkalrm *);
-+ int (*set_alarm)(struct device *, struct rtc_wkalrm *);
-+ int (*proc)(struct device *, struct seq_file *);
-+ int (*set_mmss)(struct device *, unsigned long secs);
-+ int (*irq_set_state)(struct device *, int enabled);
-+ int (*irq_set_freq)(struct device *, int freq);
-+};
-+
-+#define RTC_DEVICE_NAME_SIZE 20
-+struct rtc_task;
-+
-+struct rtc_device
-+{
-+ int id;
-+ struct module *owner;
-+ struct rw_semaphore lock;
-+ struct class_device class_dev;
-+ struct rtc_class_ops *ops;
-+ char name[RTC_DEVICE_NAME_SIZE];
-+
-+ struct cdev char_dev;
-+ struct semaphore char_sem;
-+
-+ unsigned long irq_data;
-+ spinlock_t irq_lock;
-+ wait_queue_head_t irq_queue;
-+ struct fasync_struct *async_queue;
-+
-+ spinlock_t irq_task_lock;
-+ struct rtc_task *irq_task;
-+ int irq_freq;
-+};
-+#define to_rtc_device(d) container_of(d, struct rtc_device, class_dev)
-+
-+extern struct rtc_device *rtc_device_register(char *name,
-+ struct device *dev,
-+ struct rtc_class_ops *ops,
-+ struct module *owner);
-+extern void rtc_device_unregister(struct rtc_device *rdev);
-+extern int rtc_interface_register(struct class_interface *intf);
-+
-+
-+extern int rtc_month_days(unsigned int month, unsigned int year);
-+extern int rtc_valid_tm(struct rtc_time *tm);
-+extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time);
-+extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm);
-+
-+extern int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm);
-+extern int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm);
-+extern int rtc_read_alarm(struct class_device *class_dev,
-+ struct rtc_wkalrm *alrm);
-+extern int rtc_set_alarm(struct class_device *class_dev,
-+ struct rtc_wkalrm *alrm);
-+extern void rtc_update_irq(struct class_device *class_dev,
-+ unsigned long num, unsigned long events);
-+
- typedef struct rtc_task {
- void (*func)(void *private_data);
- void *private_data;
---- linux-nslu2.orig/drivers/Kconfig 2006-01-03 15:31:19.000000000 +0100
-+++ linux-nslu2/drivers/Kconfig 2006-01-04 01:27:31.000000000 +0100
-@@ -66,4 +66,6 @@ source "drivers/infiniband/Kconfig"
-
- source "drivers/sn/Kconfig"
-
-+source "drivers/rtc/Kconfig"
-+
- endmenu
---- linux-nslu2.orig/drivers/Makefile 2006-01-03 15:33:32.000000000 +0100
-+++ linux-nslu2/drivers/Makefile 2006-01-04 01:27:31.000000000 +0100
-@@ -54,6 +54,7 @@ obj-$(CONFIG_USB_GADGET) += usb/gadget/
- obj-$(CONFIG_GAMEPORT) += input/gameport/
- obj-$(CONFIG_INPUT) += input/
- obj-$(CONFIG_I2O) += message/
-+obj-y += rtc/
- obj-$(CONFIG_I2C) += i2c/
- obj-$(CONFIG_W1) += w1/
- obj-$(CONFIG_HWMON) += hwmon/
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/class.c 2006-01-03 15:45:19.000000000 +0100
-@@ -0,0 +1,141 @@
-+/*
-+ * RTC subsystem, base class
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * class skeleton from drivers/hwmon/hwmon.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+#include <linux/kdev_t.h>
-+#include <linux/idr.h>
-+
-+static DEFINE_IDR(rtc_idr);
-+static DECLARE_MUTEX(idr_lock);
-+struct class *rtc_class;
-+
-+static void rtc_device_release(struct class_device *class_dev)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+ down(&idr_lock);
-+ idr_remove(&rtc_idr, rtc->id);
-+ up(&idr_lock);
-+ kfree(rtc);
-+}
-+
-+/**
-+ * rtc_device_register - register w/ RTC class
-+ * @dev: the device to register
-+ *
-+ * rtc_device_unregister() must be called when the class device is no
-+ * longer needed.
-+ *
-+ * Returns the pointer to the new struct class device.
-+ */
-+struct rtc_device *rtc_device_register(char *name, struct device *dev,
-+ struct rtc_class_ops *ops,
-+ struct module *owner)
-+{
-+ struct rtc_device *rtc;
-+ int id, err;
-+
-+ if (idr_pre_get(&rtc_idr, GFP_KERNEL) == 0) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+
-+ down(&idr_lock);
-+ err = idr_get_new(&rtc_idr, NULL, &id);
-+ up(&idr_lock);
-+
-+ if (err < 0)
-+ goto exit;
-+
-+ id = id & MAX_ID_MASK;
-+
-+ if ((rtc = kzalloc(sizeof(struct rtc_device), GFP_KERNEL)) == NULL) {
-+ err = -ENOMEM;
-+ goto exit_idr;
-+ }
-+
-+ rtc->id = id;
-+ rtc->ops = ops;
-+ rtc->owner = owner;
-+ rtc->class_dev.dev = dev;
-+ rtc->class_dev.class = rtc_class;
-+ rtc->class_dev.release = rtc_device_release;
-+
-+ init_rwsem(&rtc->lock);
-+ spin_lock_init(&rtc->irq_lock);
-+ spin_lock_init(&rtc->irq_task_lock);
-+
-+ strlcpy(rtc->name, name, RTC_DEVICE_NAME_SIZE);
-+ snprintf(rtc->class_dev.class_id, BUS_ID_SIZE, "rtc%d", id);
-+
-+ if ((err = class_device_register(&rtc->class_dev)))
-+ goto exit_kfree;
-+
-+ dev_info(dev, "rtc core: registered %s as %s\n",
-+ rtc->name, rtc->class_dev.class_id);
-+
-+ return rtc;
-+
-+exit_kfree:
-+ kfree(rtc);
-+
-+exit_idr:
-+ idr_remove(&rtc_idr, id);
-+
-+exit:
-+ return ERR_PTR(err);
-+}
-+EXPORT_SYMBOL_GPL(rtc_device_register);
-+
-+
-+/**
-+ * rtc_device_unregister - removes the previously registered RTC class device
-+ *
-+ * @rtc: the RTC class device to destroy
-+ */
-+void rtc_device_unregister(struct rtc_device *rtc)
-+{
-+ down_write(&rtc->lock);
-+ class_device_unregister(&rtc->class_dev);
-+}
-+EXPORT_SYMBOL_GPL(rtc_device_unregister);
-+
-+int rtc_interface_register(struct class_interface *intf)
-+{
-+ intf->class = rtc_class;
-+ return class_interface_register(intf);
-+}
-+EXPORT_SYMBOL_GPL(rtc_interface_register);
-+
-+static int __init rtc_init(void)
-+{
-+ rtc_class = class_create(THIS_MODULE, "rtc");
-+ if (IS_ERR(rtc_class)) {
-+ printk(KERN_ERR "%s: couldn't create class\n", __FILE__);
-+ return PTR_ERR(rtc_class);
-+ }
-+ return 0;
-+}
-+
-+static void __exit rtc_exit(void)
-+{
-+ class_destroy(rtc_class);
-+}
-+
-+module_init(rtc_init);
-+module_exit(rtc_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towerteh.it>");
-+MODULE_DESCRIPTION("RTC class support");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/Kconfig 2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,93 @@
-+#
-+# RTC class/drivers configuration
-+#
-+
-+menu "Real Time Clock"
-+
-+config RTC_CLASS
-+ tristate "RTC class"
-+ depends on EXPERIMENTAL
-+ default y
-+ help
-+ Generic RTC class support. If you say yes here, you will
-+ be allowed to plug one or more RTCs to your system. You will
-+ probably want to enable one of more of the interfaces below.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-class.
-+
-+comment "RTC interfaces"
-+ depends on RTC_CLASS
-+
-+config RTC_INTF_SYSFS
-+ tristate "sysfs"
-+ depends on RTC_CLASS && SYSFS
-+ default RTC_CLASS
-+ help
-+ Say yes here if you want to use your RTC using the sysfs
-+ interface, /sys/class/rtc/rtcX .
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-sysfs.
-+
-+config RTC_INTF_PROC
-+ tristate "proc"
-+ depends on RTC_CLASS && PROC_FS
-+ default RTC_CLASS
-+ help
-+ Say yes here if you want to use your RTC using the proc
-+ interface, /proc/driver/rtc .
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-proc.
-+
-+config RTC_INTF_DEV
-+ tristate "dev"
-+ depends on RTC_CLASS
-+ default RTC_CLASS
-+ help
-+ Say yes here if you want to use your RTC using the dev
-+ interface, /dev/rtc .
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-dev.
-+
-+comment "RTC drivers"
-+ depends on RTC_CLASS
-+
-+config RTC_DRV_X1205
-+ tristate "Xicor/Intersil X1205 RTC chip"
-+ depends on RTC_CLASS && I2C
-+ help
-+ If you say yes here you get support for the
-+ Xicor/Intersil X1205 RTC chip.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-x1205.
-+
-+config RTC_DRV_DS1672
-+ tristate "Dallas/Maxim DS1672"
-+ depends on RTC_CLASS && I2C
-+ help
-+ If you say yes here you get support for the
-+ Dallas/Maxim DS1672 timekeeping chip.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-ds1672.
-+
-+config RTC_DRV_TEST
-+ tristate "Test driver/device"
-+ depends on RTC_CLASS
-+ help
-+ If you say yes here you get support for the
-+ RTC test driver. It's a software RTC which can be
-+ used to test the RTC subsystem APIs. It gets
-+ the time from the system clock.
-+ You want this driver only if you are doing development
-+ on the RTC subsystem. Please read the source code
-+ for further details.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-test.
-+
-+endmenu
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/Makefile 2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,15 @@
-+#
-+# Makefile for RTC class/drivers.
-+#
-+
-+obj-y += utils.o
-+obj-$(CONFIG_RTC_CLASS) += rtc-core.o
-+rtc-core-y := class.o interface.o
-+obj-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
-+obj-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o
-+obj-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o
-+
-+obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
-+obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
-+obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
-+
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/interface.c 2006-01-03 15:34:24.000000000 +0100
-@@ -0,0 +1,189 @@
-+/*
-+ * RTC subsystem, interface functions
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/rtc.h>
-+
-+extern struct class *rtc_class;
-+
-+int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm)
-+{
-+ int err = -EINVAL;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+ if (ops->read_time) {
-+ memset(tm, 0, sizeof(struct rtc_time));
-+ err = ops->read_time(class_dev->dev, tm);
-+ }
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_read_time);
-+
-+int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm)
-+{
-+ int err;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+ err = rtc_valid_tm(tm);
-+ if (err == 0 && ops->set_time)
-+ err = ops->set_time(class_dev->dev, tm);
-+
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_set_time);
-+
-+int rtc_read_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm)
-+{
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+ int err = -EINVAL;
-+
-+ if (ops->read_alarm) {
-+ memset(alarm, 0, sizeof(struct rtc_wkalrm));
-+ err = ops->read_alarm(class_dev->dev, alarm);
-+ }
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_read_alarm);
-+
-+int rtc_set_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm)
-+{
-+ int err = -EINVAL;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+
-+ if (ops->set_alarm)
-+ err = ops->set_alarm(class_dev->dev, alarm);
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_set_alarm);
-+
-+void rtc_update_irq(struct class_device *class_dev,
-+ unsigned long num, unsigned long events)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ spin_lock(&rtc->irq_lock);
-+ rtc->irq_data = (rtc->irq_data + (num << 8)) | events;
-+ spin_unlock(&rtc->irq_lock);
-+
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task)
-+ rtc->irq_task->func(rtc->irq_task->private_data);
-+ spin_unlock(&rtc->irq_task_lock);
-+
-+ wake_up_interruptible(&rtc->irq_queue);
-+ kill_fasync(&rtc->async_queue, SIGIO, POLL_IN);
-+}
-+EXPORT_SYMBOL(rtc_update_irq);
-+
-+struct class_device *rtc_open(char *name)
-+{
-+ struct class_device *class_dev = NULL,
-+ *class_dev_tmp;
-+
-+ down(&rtc_class->sem);
-+ list_for_each_entry(class_dev_tmp, &rtc_class->children, node) {
-+ if (strncmp(class_dev_tmp->class_id, name, BUS_ID_SIZE) == 0) {
-+ class_dev = class_dev_tmp;
-+ break;
-+ }
-+ }
-+ up(&rtc_class->sem);
-+
-+ return class_dev;
-+}
-+EXPORT_SYMBOL(rtc_open);
-+
-+void rtc_close(struct class_device *class_dev)
-+{
-+}
-+EXPORT_SYMBOL(rtc_close);
-+
-+int rtc_irq_register(struct class_device *class_dev, struct rtc_task *task)
-+{
-+ int retval = -EBUSY;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ if (task == NULL || task->func == NULL)
-+ return -EINVAL;
-+
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task == NULL) {
-+ rtc->irq_task = task;
-+ retval = 0;
-+ }
-+ spin_unlock(&rtc->irq_task_lock);
-+
-+ return retval;
-+}
-+EXPORT_SYMBOL(rtc_irq_register);
-+
-+void rtc_irq_unregister(struct class_device *class_dev, struct rtc_task *task)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task == task)
-+ rtc->irq_task = NULL;
-+ spin_unlock(&rtc->irq_task_lock);
-+}
-+EXPORT_SYMBOL(rtc_irq_unregister);
-+
-+int rtc_irq_set_state(struct class_device *class_dev, struct rtc_task *task, int enabled)
-+{
-+ int err = 0;
-+ unsigned long flags;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ spin_lock_irqsave(&rtc->irq_task_lock, flags);
-+ if (rtc->irq_task != task)
-+ err = -ENXIO;
-+ spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
-+
-+ if (err == 0)
-+ err = rtc->ops->irq_set_state(class_dev->dev, enabled);
-+
-+ return err;
-+}
-+EXPORT_SYMBOL(rtc_irq_set_state);
-+
-+int rtc_irq_set_freq(struct class_device *class_dev, struct rtc_task *task, int freq)
-+{
-+ int err = 0, tmp = 0;
-+ unsigned long flags;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ /* allowed range is 2-8192 */
-+ if (freq < 2 || freq > 8192)
-+ return -EINVAL;
-+
-+/* if ((freq > rtc_max_user_freq) && (!capable(CAP_SYS_RESOURCE)))
-+ return -EACCES;
-+*/
-+ /* check if freq is a power of 2 */
-+ while (freq > (1 << tmp))
-+ tmp++;
-+
-+ if (freq != (1 << tmp))
-+ return -EINVAL;
-+
-+ spin_lock_irqsave(&rtc->irq_task_lock, flags);
-+ if (rtc->irq_task != task)
-+ err = -ENXIO;
-+ spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
-+
-+ if (err == 0) {
-+ if ((err = rtc->ops->irq_set_freq(class_dev->dev, freq)) == 0)
-+ rtc->irq_freq = freq;
-+ }
-+ return err;
-+
-+}
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/utils.c 2006-01-03 15:34:24.000000000 +0100
-@@ -0,0 +1,97 @@
-+/*
-+ * RTC subsystem, utility functions
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/rtc.h>
-+
-+static const unsigned char rtc_days_in_month[] = {
-+ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-+};
-+
-+#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
-+#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
-+
-+int rtc_month_days(unsigned int month, unsigned int year)
-+{
-+ return rtc_days_in_month[month] + (LEAP_YEAR(year) && month == 1);
-+}
-+EXPORT_SYMBOL(rtc_month_days);
-+
-+/*
-+ * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
-+ */
-+void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
-+{
-+ int days, month, year;
-+
-+ days = time / 86400;
-+ time -= days * 86400;
-+
-+ tm->tm_wday = (days + 4) % 7;
-+
-+ year = 1970 + days / 365;
-+ days -= (year - 1970) * 365
-+ + LEAPS_THRU_END_OF(year - 1)
-+ - LEAPS_THRU_END_OF(1970 - 1);
-+ if (days < 0) {
-+ year -= 1;
-+ days += 365 + LEAP_YEAR(year);
-+ }
-+ tm->tm_year = year - 1900;
-+ tm->tm_yday = days + 1;
-+
-+ for (month = 0; month < 11; month++) {
-+ int newdays;
-+
-+ newdays = days - rtc_month_days(month, year);
-+ if (newdays < 0)
-+ break;
-+ days = newdays;
-+ }
-+ tm->tm_mon = month;
-+ tm->tm_mday = days + 1;
-+
-+ tm->tm_hour = time / 3600;
-+ time -= tm->tm_hour * 3600;
-+ tm->tm_min = time / 60;
-+ tm->tm_sec = time - tm->tm_min * 60;
-+}
-+EXPORT_SYMBOL(rtc_time_to_tm);
-+
-+/*
-+ * Does the rtc_time represent a valid date/time?
-+ */
-+int rtc_valid_tm(struct rtc_time *tm)
-+{
-+ if (tm->tm_year < 70 ||
-+ tm->tm_mon >= 12 ||
-+ tm->tm_mday < 1 ||
-+ tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year + 1900) ||
-+ tm->tm_hour >= 24 ||
-+ tm->tm_min >= 60 ||
-+ tm->tm_sec >= 60)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(rtc_valid_tm);
-+
-+/*
-+ * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
-+ */
-+int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
-+{
-+ *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
-+ tm->tm_hour, tm->tm_min, tm->tm_sec);
-+ return 0;
-+}
-+EXPORT_SYMBOL(rtc_tm_to_time);
---- linux-nslu2.orig/arch/arm/Kconfig 2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/arch/arm/Kconfig 2006-01-04 01:27:31.000000000 +0100
-@@ -750,6 +750,8 @@ source "drivers/usb/Kconfig"
-
- source "drivers/mmc/Kconfig"
-
-+source "drivers/rtc/Kconfig"
-+
- endmenu
-
- source "fs/Kconfig"
---- linux-nslu2.orig/arch/arm/common/rtctime.c 2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/arch/arm/common/rtctime.c 2006-01-04 01:27:09.000000000 +0100
-@@ -40,89 +40,6 @@ static struct rtc_ops *rtc_ops;
-
- #define rtc_epoch 1900UL
-
--static const unsigned char days_in_month[] = {
-- 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
--};
--
--#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
--#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
--
--static int month_days(unsigned int month, unsigned int year)
--{
-- return days_in_month[month] + (LEAP_YEAR(year) && month == 1);
--}
--
--/*
-- * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
-- */
--void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
--{
-- int days, month, year;
--
-- days = time / 86400;
-- time -= days * 86400;
--
-- tm->tm_wday = (days + 4) % 7;
--
-- year = 1970 + days / 365;
-- days -= (year - 1970) * 365
-- + LEAPS_THRU_END_OF(year - 1)
-- - LEAPS_THRU_END_OF(1970 - 1);
-- if (days < 0) {
-- year -= 1;
-- days += 365 + LEAP_YEAR(year);
-- }
-- tm->tm_year = year - 1900;
-- tm->tm_yday = days + 1;
--
-- for (month = 0; month < 11; month++) {
-- int newdays;
--
-- newdays = days - month_days(month, year);
-- if (newdays < 0)
-- break;
-- days = newdays;
-- }
-- tm->tm_mon = month;
-- tm->tm_mday = days + 1;
--
-- tm->tm_hour = time / 3600;
-- time -= tm->tm_hour * 3600;
-- tm->tm_min = time / 60;
-- tm->tm_sec = time - tm->tm_min * 60;
--}
--EXPORT_SYMBOL(rtc_time_to_tm);
--
--/*
-- * Does the rtc_time represent a valid date/time?
-- */
--int rtc_valid_tm(struct rtc_time *tm)
--{
-- if (tm->tm_year < 70 ||
-- tm->tm_mon >= 12 ||
-- tm->tm_mday < 1 ||
-- tm->tm_mday > month_days(tm->tm_mon, tm->tm_year + 1900) ||
-- tm->tm_hour >= 24 ||
-- tm->tm_min >= 60 ||
-- tm->tm_sec >= 60)
-- return -EINVAL;
--
-- return 0;
--}
--EXPORT_SYMBOL(rtc_valid_tm);
--
--/*
-- * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
-- */
--int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
--{
-- *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
-- tm->tm_hour, tm->tm_min, tm->tm_sec);
--
-- return 0;
--}
--EXPORT_SYMBOL(rtc_tm_to_time);
--
- /*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
-@@ -141,13 +58,13 @@ void rtc_next_alarm_time(struct rtc_time
- next->tm_sec = alrm->tm_sec;
- }
-
--static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm)
-+static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
- {
- memset(tm, 0, sizeof(struct rtc_time));
- return ops->read_time(tm);
- }
-
--static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm)
-+static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm)
- {
- int ret;
-
-@@ -158,7 +75,7 @@ static inline int rtc_set_time(struct rt
- return ret;
- }
-
--static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-+static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
- {
- int ret = -EINVAL;
- if (ops->read_alarm) {
-@@ -168,7 +85,7 @@ static inline int rtc_read_alarm(struct
- return ret;
- }
-
--static inline int rtc_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-+static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
- {
- int ret = -EINVAL;
- if (ops->set_alarm)
-@@ -256,7 +173,7 @@ static int rtc_ioctl(struct inode *inode
-
- switch (cmd) {
- case RTC_ALM_READ:
-- ret = rtc_read_alarm(ops, &alrm);
-+ ret = rtc_arm_read_alarm(ops, &alrm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &alrm.time, sizeof(tm));
-@@ -278,11 +195,11 @@ static int rtc_ioctl(struct inode *inode
- alrm.time.tm_wday = -1;
- alrm.time.tm_yday = -1;
- alrm.time.tm_isdst = -1;
-- ret = rtc_set_alarm(ops, &alrm);
-+ ret = rtc_arm_set_alarm(ops, &alrm);
- break;
-
- case RTC_RD_TIME:
-- ret = rtc_read_time(ops, &tm);
-+ ret = rtc_arm_read_time(ops, &tm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &tm, sizeof(tm));
-@@ -300,7 +217,7 @@ static int rtc_ioctl(struct inode *inode
- ret = -EFAULT;
- break;
- }
-- ret = rtc_set_time(ops, &tm);
-+ ret = rtc_arm_set_time(ops, &tm);
- break;
-
- case RTC_EPOCH_SET:
-@@ -331,11 +248,11 @@ static int rtc_ioctl(struct inode *inode
- ret = -EFAULT;
- break;
- }
-- ret = rtc_set_alarm(ops, &alrm);
-+ ret = rtc_arm_set_alarm(ops, &alrm);
- break;
-
- case RTC_WKALM_RD:
-- ret = rtc_read_alarm(ops, &alrm);
-+ ret = rtc_arm_read_alarm(ops, &alrm);
- if (ret)
- break;
- ret = copy_to_user(uarg, &alrm, sizeof(alrm));
-@@ -425,7 +342,7 @@ static int rtc_read_proc(char *page, cha
- struct rtc_time tm;
- char *p = page;
-
-- if (rtc_read_time(ops, &tm) == 0) {
-+ if (rtc_arm_read_time(ops, &tm) == 0) {
- p += sprintf(p,
- "rtc_time\t: %02d:%02d:%02d\n"
- "rtc_date\t: %04d-%02d-%02d\n"
-@@ -435,7 +352,7 @@ static int rtc_read_proc(char *page, cha
- rtc_epoch);
- }
-
-- if (rtc_read_alarm(ops, &alrm) == 0) {
-+ if (rtc_arm_read_alarm(ops, &alrm) == 0) {
- p += sprintf(p, "alrm_time\t: ");
- if ((unsigned int)alrm.time.tm_hour <= 24)
- p += sprintf(p, "%02d:", alrm.time.tm_hour);
---- linux-nslu2.orig/include/asm-arm/rtc.h 2006-01-04 01:27:04.000000000 +0100
-+++ linux-nslu2/include/asm-arm/rtc.h 2006-01-04 01:27:09.000000000 +0100
-@@ -25,9 +25,6 @@ struct rtc_ops {
- int (*proc)(char *buf);
- };
-
--void rtc_time_to_tm(unsigned long, struct rtc_time *);
--int rtc_tm_to_time(struct rtc_time *, unsigned long *);
--int rtc_valid_tm(struct rtc_time *);
- void rtc_next_alarm_time(struct rtc_time *, struct rtc_time *, struct rtc_time *);
- void rtc_update(unsigned long, unsigned long);
- int register_rtc(struct rtc_ops *);
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-sysfs.c 2006-01-04 01:27:12.000000000 +0100
-@@ -0,0 +1,125 @@
-+/*
-+ * RTC subsystem, sysfs interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+
-+/* device attributes */
-+
-+static ssize_t rtc_sysfs_show_name(struct class_device *dev, char *buf)
-+{
-+ return sprintf(buf, "%s\n", to_rtc_device(dev)->name);
-+}
-+static CLASS_DEVICE_ATTR(name, S_IRUGO, rtc_sysfs_show_name, NULL);
-+
-+static ssize_t rtc_sysfs_show_date(struct class_device *dev, char *buf)
-+{
-+ ssize_t retval = 0;
-+ struct rtc_device *rtc = to_rtc_device(dev);
-+ struct rtc_time tm;
-+
-+ if (down_read_trylock(&rtc->lock) == 0)
-+ return -ENODEV;
-+
-+ if (rtc_read_time(dev, &tm) == 0) {
-+ retval = sprintf(buf, "%04d-%02d-%02d\n",
-+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
-+ }
-+
-+ up_read(&rtc->lock);
-+ return retval;
-+}
-+static CLASS_DEVICE_ATTR(date, S_IRUGO, rtc_sysfs_show_date, NULL);
-+
-+static ssize_t rtc_sysfs_show_time(struct class_device *dev, char *buf)
-+{
-+ ssize_t retval = 0;
-+ struct rtc_device *rtc = to_rtc_device(dev);
-+ struct rtc_time tm;
-+
-+ if (down_read_trylock(&rtc->lock) == 0)
-+ return -ENODEV;
-+
-+ if (rtc_read_time(dev, &tm) == 0) {
-+ retval = sprintf(buf, "%02d:%02d:%02d\n",
-+ tm.tm_hour, tm.tm_min, tm.tm_sec);
-+ }
-+
-+ up_read(&rtc->lock);
-+ return retval;
-+}
-+static CLASS_DEVICE_ATTR(time, S_IRUGO, rtc_sysfs_show_time, NULL);
-+
-+static ssize_t rtc_sysfs_show_since_epoch(struct class_device *dev, char *buf)
-+{
-+ ssize_t retval = 0;
-+ struct rtc_device *rtc = to_rtc_device(dev);
-+ struct rtc_time tm;
-+
-+ if (down_read_trylock(&rtc->lock) == 0)
-+ return -ENODEV;
-+
-+ if (rtc_read_time(dev, &tm) == 0) {
-+ unsigned long time;
-+ rtc_tm_to_time(&tm, &time);
-+ retval = sprintf(buf, "%lu\n", time);
-+ }
-+
-+ up_read(&rtc->lock);
-+ return retval;
-+}
-+static CLASS_DEVICE_ATTR(since_epoch, S_IRUGO, rtc_sysfs_show_since_epoch, NULL);
-+
-+/* insertion/removal hooks */
-+
-+static int __devinit rtc_sysfs_add_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ class_device_create_file(class_dev, &class_device_attr_name);
-+ class_device_create_file(class_dev, &class_device_attr_date);
-+ class_device_create_file(class_dev, &class_device_attr_time);
-+ class_device_create_file(class_dev, &class_device_attr_since_epoch);
-+ dev_info(class_dev->dev, "rtc intf: sysfs\n");
-+ return 0;
-+}
-+
-+static void rtc_sysfs_remove_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ class_device_remove_file(class_dev, &class_device_attr_name);
-+ class_device_remove_file(class_dev, &class_device_attr_date);
-+ class_device_remove_file(class_dev, &class_device_attr_time);
-+ class_device_remove_file(class_dev, &class_device_attr_since_epoch);
-+}
-+
-+/* interface registration */
-+
-+struct class_interface rtc_sysfs_interface = {
-+ .add = &rtc_sysfs_add_device,
-+ .remove = &rtc_sysfs_remove_device,
-+};
-+
-+static int __init rtc_sysfs_init(void)
-+{
-+ return rtc_interface_register(&rtc_sysfs_interface);
-+}
-+
-+static void __exit rtc_sysfs_exit(void)
-+{
-+ class_interface_unregister(&rtc_sysfs_interface);
-+}
-+
-+module_init(rtc_sysfs_init);
-+module_exit(rtc_sysfs_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class sysfs interface");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-proc.c 2006-01-04 01:27:14.000000000 +0100
-@@ -0,0 +1,158 @@
-+/*
-+ * RTC subsystem, proc interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+#include <linux/proc_fs.h>
-+#include <linux/seq_file.h>
-+
-+static struct class_device *rtc_dev = NULL;
-+static DECLARE_MUTEX(rtc_sem);
-+
-+static int rtc_proc_show(struct seq_file *seq, void *offset)
-+{
-+ struct class_device *class_dev = seq->private;
-+ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
-+ struct rtc_wkalrm alrm;
-+ struct rtc_time tm;
-+
-+ if (rtc_read_time(class_dev, &tm) == 0) {
-+ seq_printf(seq,
-+ "rtc_time\t: %02d:%02d:%02d\n"
-+ "rtc_date\t: %04d-%02d-%02d\n",
-+ tm.tm_hour, tm.tm_min, tm.tm_sec,
-+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
-+ }
-+
-+ if (rtc_read_alarm(class_dev, &alrm) == 0) {
-+ seq_printf(seq, "alrm_time\t: ");
-+ if ((unsigned int)alrm.time.tm_hour <= 24)
-+ seq_printf(seq, "%02d:", alrm.time.tm_hour);
-+ else
-+ seq_printf(seq, "**:");
-+ if ((unsigned int)alrm.time.tm_min <= 59)
-+ seq_printf(seq, "%02d:", alrm.time.tm_min);
-+ else
-+ seq_printf(seq, "**:");
-+ if ((unsigned int)alrm.time.tm_sec <= 59)
-+ seq_printf(seq, "%02d\n", alrm.time.tm_sec);
-+ else
-+ seq_printf(seq, "**\n");
-+
-+ seq_printf(seq, "alrm_date\t: ");
-+ if ((unsigned int)alrm.time.tm_year <= 200)
-+ seq_printf(seq, "%04d-", alrm.time.tm_year + 1900);
-+ else
-+ seq_printf(seq, "****-");
-+ if ((unsigned int)alrm.time.tm_mon <= 11)
-+ seq_printf(seq, "%02d-", alrm.time.tm_mon + 1);
-+ else
-+ seq_printf(seq, "**-");
-+ if ((unsigned int)alrm.time.tm_mday <= 31)
-+ seq_printf(seq, "%02d\n", alrm.time.tm_mday);
-+ else
-+ seq_printf(seq, "**\n");
-+ seq_printf(seq, "alrm_wakeup\t: %s\n",
-+ alrm.enabled ? "yes" : "no");
-+ seq_printf(seq, "alrm_pending\t: %s\n",
-+ alrm.pending ? "yes" : "no");
-+ }
-+
-+ if (ops->proc)
-+ ops->proc(class_dev->dev, seq);
-+
-+ return 0;
-+}
-+
-+static int rtc_proc_open(struct inode *inode, struct file *file)
-+{
-+ struct class_device *class_dev = PDE(inode)->data;
-+
-+ if (!try_module_get(THIS_MODULE))
-+ return -ENODEV;
-+
-+ return single_open(file, rtc_proc_show, class_dev);
-+}
-+
-+static int rtc_proc_release(struct inode *inode, struct file *file)
-+{
-+ int res = single_release(inode, file);
-+ module_put(THIS_MODULE);
-+ return res;
-+}
-+
-+static struct file_operations rtc_proc_fops = {
-+ .open = rtc_proc_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = rtc_proc_release,
-+};
-+
-+static int rtc_proc_add_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ down(&rtc_sem);
-+ if (rtc_dev == NULL) {
-+ struct proc_dir_entry *ent;
-+
-+ rtc_dev = class_dev;
-+
-+ if ((ent = create_proc_entry("driver/rtc", 0, NULL))) {
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ ent->proc_fops = &rtc_proc_fops;
-+ ent->owner = rtc->owner;
-+ ent->data = class_dev;
-+
-+ dev_info(class_dev->dev, "rtc intf: proc\n");
-+ }
-+ else
-+ rtc_dev = NULL;
-+ }
-+ up(&rtc_sem);
-+
-+ return 0;
-+}
-+
-+static void rtc_proc_remove_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ down(&rtc_sem);
-+ if (rtc_dev == class_dev) {
-+ remove_proc_entry("driver/rtc", NULL);
-+ rtc_dev = NULL;
-+ }
-+ up(&rtc_sem);
-+}
-+
-+struct class_interface rtc_proc_interface = {
-+ .add = &rtc_proc_add_device,
-+ .remove = &rtc_proc_remove_device,
-+};
-+
-+static int __init rtc_proc_init(void)
-+{
-+ return rtc_interface_register(&rtc_proc_interface);
-+}
-+
-+static void __exit rtc_proc_exit(void)
-+{
-+ class_interface_unregister(&rtc_proc_interface);
-+}
-+
-+module_init(rtc_proc_init);
-+module_exit(rtc_proc_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class proc interface");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-dev.c 2006-01-04 01:27:15.000000000 +0100
-@@ -0,0 +1,372 @@
-+/*
-+ * RTC subsystem, dev interface
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * based on arch/arm/common/rtctime.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+
-+static dev_t rtc_devt;
-+
-+#define RTC_DEV_MAX 16 /* 16 RTCs should be enough for everyone... */
-+
-+static int rtc_dev_open(struct inode *inode, struct file *file)
-+{
-+ int err;
-+ struct rtc_device *rtc = container_of(inode->i_cdev,
-+ struct rtc_device, char_dev);
-+ struct rtc_class_ops *ops = rtc->ops;
-+
-+ /* We keep the lock as long as the device is in use
-+ * and return immediately if busy
-+ */
-+ if (down_trylock(&rtc->char_sem))
-+ return -EBUSY;
-+
-+ file->private_data = &rtc->class_dev;
-+
-+ err = ops->open ? ops->open(rtc->class_dev.dev) : 0;
-+ if (err == 0) {
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ rtc->irq_data = 0;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ return 0;
-+ }
-+
-+ /* something has gone wrong, release the lock */
-+ up(&rtc->char_sem);
-+ return err;
-+}
-+
-+
-+static ssize_t
-+rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+
-+ DECLARE_WAITQUEUE(wait, current);
-+ unsigned long data;
-+ ssize_t ret;
-+
-+ if (count < sizeof(unsigned long))
-+ return -EINVAL;
-+
-+ add_wait_queue(&rtc->irq_queue, &wait);
-+ do {
-+ __set_current_state(TASK_INTERRUPTIBLE);
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ data = rtc->irq_data;
-+ rtc->irq_data = 0;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ if (data != 0) {
-+ ret = 0;
-+ break;
-+ }
-+ if (file->f_flags & O_NONBLOCK) {
-+ ret = -EAGAIN;
-+ break;
-+ }
-+ if (signal_pending(current)) {
-+ ret = -ERESTARTSYS;
-+ break;
-+ }
-+ schedule();
-+ } while (1);
-+ set_current_state(TASK_RUNNING);
-+ remove_wait_queue(&rtc->irq_queue, &wait);
-+
-+ if (ret == 0) {
-+ ret = put_user(data, (unsigned long __user *)buf);
-+ if (ret == 0)
-+ ret = sizeof(unsigned long);
-+ }
-+ return ret;
-+}
-+
-+static unsigned int rtc_dev_poll(struct file *file, poll_table *wait)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+ unsigned long data;
-+
-+ poll_wait(file, &rtc->irq_queue, wait);
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ data = rtc->irq_data;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ return data != 0 ? POLLIN | POLLRDNORM : 0;
-+}
-+
-+static int rtc_dev_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ int err = 0;
-+ struct class_device *class_dev = file->private_data;
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+ struct rtc_class_ops *ops = rtc->ops;
-+ struct rtc_time tm;
-+ struct rtc_wkalrm alarm;
-+ void __user *uarg = (void __user *) arg;
-+
-+ /* avoid conflicting IRQ users */
-+ if (cmd == RTC_PIE_ON || cmd == RTC_PIE_OFF || cmd == RTC_IRQP_SET) {
-+ spin_lock(&rtc->irq_task_lock);
-+ if (rtc->irq_task)
-+ err = -EBUSY;
-+ spin_unlock(&rtc->irq_task_lock);
-+
-+ if (err < 0)
-+ return err;
-+ }
-+
-+ /* try the driver's ioctl interface */
-+ if (ops->ioctl) {
-+ err = ops->ioctl(class_dev->dev, cmd, arg);
-+ if (err < 0 && err != -EINVAL)
-+ return err;
-+ }
-+
-+ /* if the driver does not provide the ioctl interface
-+ * or if that particular ioctl was not implemented
-+ * (-EINVAL), we will try to emulate here.
-+ */
-+
-+ switch (cmd) {
-+ case RTC_ALM_READ:
-+ if ((err = rtc_read_alarm(class_dev, &alarm)) < 0)
-+ return err;
-+
-+ if ((err = copy_to_user(uarg, &alarm.time, sizeof(tm))))
-+ return -EFAULT;
-+ break;
-+
-+ case RTC_ALM_SET:
-+ if ((err = copy_from_user(&alarm.time, uarg, sizeof(tm))))
-+ return -EFAULT;
-+
-+ alarm.enabled = 0;
-+ alarm.pending = 0;
-+ alarm.time.tm_mday = -1;
-+ alarm.time.tm_mon = -1;
-+ alarm.time.tm_year = -1;
-+ alarm.time.tm_wday = -1;
-+ alarm.time.tm_yday = -1;
-+ alarm.time.tm_isdst = -1;
-+ err = rtc_set_alarm(class_dev, &alarm);
-+ break;
-+
-+ case RTC_RD_TIME:
-+ if ((err = rtc_read_time(class_dev, &tm)) < 0)
-+ return err;
-+
-+ if ((err = copy_to_user(uarg, &tm, sizeof(tm))))
-+ return -EFAULT;
-+ break;
-+
-+ case RTC_SET_TIME:
-+ if (!capable(CAP_SYS_TIME))
-+ return -EACCES;
-+
-+ if ((err = copy_from_user(&tm, uarg, sizeof(tm))))
-+ return -EFAULT;
-+
-+ err = rtc_set_time(class_dev, &tm);
-+ break;
-+#if 0
-+ case RTC_EPOCH_SET:
-+#ifndef rtc_epoch
-+ /*
-+ * There were no RTC clocks before 1900.
-+ */
-+ if (arg < 1900) {
-+ err = -EINVAL;
-+ break;
-+ }
-+ if (!capable(CAP_SYS_TIME)) {
-+ err = -EACCES;
-+ break;
-+ }
-+ rtc_epoch = arg;
-+ err = 0;
-+#endif
-+ break;
-+
-+ case RTC_EPOCH_READ:
-+ err = put_user(rtc_epoch, (unsigned long __user *)uarg);
-+ break;
-+#endif
-+ case RTC_WKALM_SET:
-+ if ((err = copy_from_user(&alarm, uarg, sizeof(alarm))))
-+ return -EFAULT;
-+
-+ err = rtc_set_alarm(class_dev, &alarm);
-+ break;
-+
-+ case RTC_WKALM_RD:
-+ if ((err = rtc_read_alarm(class_dev, &alarm)) < 0)
-+ return err;
-+
-+ if ((err = copy_to_user(uarg, &alarm, sizeof(alarm))))
-+ return -EFAULT;
-+ break;
-+
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
-+
-+ return err;
-+}
-+
-+static int rtc_dev_release(struct inode *inode, struct file *file)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+
-+ if (rtc->ops->release)
-+ rtc->ops->release(rtc->class_dev.dev);
-+
-+ spin_lock_irq(&rtc->irq_lock);
-+ rtc->irq_data = 0;
-+ spin_unlock_irq(&rtc->irq_lock);
-+
-+ up(&rtc->char_sem);
-+ return 0;
-+}
-+
-+static int rtc_dev_fasync(int fd, struct file *file, int on)
-+{
-+ struct rtc_device *rtc = to_rtc_device(file->private_data);
-+ return fasync_helper(fd, file, on, &rtc->async_queue);
-+}
-+
-+static struct file_operations rtc_dev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .read = rtc_dev_read,
-+ .poll = rtc_dev_poll,
-+ .ioctl = rtc_dev_ioctl,
-+ .open = rtc_dev_open,
-+ .release = rtc_dev_release,
-+ .fasync = rtc_dev_fasync,
-+};
-+
-+static ssize_t rtc_dev_show_dev(struct class_device *class_dev, char *buf)
-+{
-+ return print_dev_t(buf, class_dev->devt);
-+}
-+static CLASS_DEVICE_ATTR(dev, S_IRUGO, rtc_dev_show_dev, NULL);
-+
-+/* insertion/removal hooks */
-+
-+static int rtc_dev_add_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ if (rtc->id >= RTC_DEV_MAX) {
-+ dev_err(class_dev->dev, "too many RTCs\n");
-+ return -EINVAL;
-+ }
-+
-+ init_MUTEX(&rtc->char_sem);
-+ spin_lock_init(&rtc->irq_lock);
-+ init_waitqueue_head(&rtc->irq_queue);
-+
-+ cdev_init(&rtc->char_dev, &rtc_dev_fops);
-+ rtc->char_dev.owner = rtc->owner;
-+ class_dev->devt = MKDEV(MAJOR(rtc_devt), rtc->id);
-+
-+ if (cdev_add(&rtc->char_dev, class_dev->devt, 1)) {
-+ cdev_del(&rtc->char_dev);
-+
-+ dev_err(class_dev->dev,
-+ "failed to add char device %d:%d\n",
-+ MAJOR(class_dev->devt),
-+ MINOR(class_dev->devt));
-+
-+ class_dev->devt = MKDEV(0, 0);
-+ return -ENODEV;
-+ }
-+
-+ class_device_create_file(class_dev, &class_device_attr_dev);
-+
-+ dev_info(class_dev->dev, "rtc intf: dev (%d:%d)\n",
-+ MAJOR(class_dev->devt),
-+ MINOR(class_dev->devt));
-+
-+ kobject_hotplug(&class_dev->kobj, KOBJ_ADD);
-+
-+ return 0;
-+}
-+
-+static void rtc_dev_remove_device(struct class_device *class_dev,
-+ struct class_interface *class_intf)
-+{
-+ struct rtc_device *rtc = to_rtc_device(class_dev);
-+
-+ class_device_remove_file(class_dev, &class_device_attr_dev);
-+
-+ if (MAJOR(class_dev->devt)) {
-+ dev_dbg(class_dev->dev, "removing char %d:%d\n",
-+ MAJOR(class_dev->devt),
-+ MINOR(class_dev->devt));
-+ cdev_del(&rtc->char_dev);
-+
-+ kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);
-+
-+ class_dev->devt = MKDEV(0, 0);
-+ }
-+}
-+
-+/* interface registration */
-+
-+struct class_interface rtc_dev_interface = {
-+ .add = &rtc_dev_add_device,
-+ .remove = &rtc_dev_remove_device,
-+};
-+
-+static int __init rtc_dev_init(void)
-+{
-+ int err;
-+
-+ if ((err = alloc_chrdev_region(&rtc_devt, 0, RTC_DEV_MAX, "rtc")) < 0) {
-+ printk(KERN_ERR "%s: failed to allocate char dev region\n",
-+ __FILE__);
-+ return err;
-+ }
-+
-+ if ((err = rtc_interface_register(&rtc_dev_interface)) < 0) {
-+ printk(KERN_ERR "%s: failed to register the interface\n",
-+ __FILE__);
-+ unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
-+ return err;
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit rtc_dev_exit(void)
-+{
-+ class_interface_unregister(&rtc_dev_interface);
-+
-+ unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
-+}
-+
-+module_init(rtc_dev_init);
-+module_exit(rtc_dev_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC class dev interface");
-+MODULE_LICENSE("GPL");
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-x1205.c 2006-01-04 01:27:17.000000000 +0100
-@@ -0,0 +1,725 @@
-+/*
-+ * An i2c driver for the Xicor/Intersil X1205 RTC
-+ * Copyright 2004 Karen Spearel
-+ * Copyright 2005 Alessandro Zummo
-+ *
-+ * please send all reports to:
-+ * kas11 at tampabay dot rr dot com
-+ * a dot zummo at towertech dot it
-+ *
-+ * based on a lot of other RTC drivers.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/err.h>
-+#include <linux/i2c.h>
-+#include <linux/string.h>
-+#include <linux/bcd.h>
-+#include <linux/rtc.h>
-+#include <linux/delay.h>
-+
-+#define DRV_VERSION "1.0.5"
-+
-+/* Addresses to scan: none. This chip is located at
-+ * 0x6f and uses a two bytes register addressing.
-+ * Two bytes need to be written to read a single register,
-+ * while most other chips just require one and take the second
-+ * one as the data to be written. To prevent corrupting
-+ * unknown chips, the user must explicitely set the probe parameter.
-+ */
-+
-+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+ "Set the system time from the hardware clock upon initialization");
-+
-+/* offsets into CCR area */
-+
-+#define CCR_SEC 0
-+#define CCR_MIN 1
-+#define CCR_HOUR 2
-+#define CCR_MDAY 3
-+#define CCR_MONTH 4
-+#define CCR_YEAR 5
-+#define CCR_WDAY 6
-+#define CCR_Y2K 7
-+
-+#define X1205_REG_SR 0x3F /* status register */
-+#define X1205_REG_Y2K 0x37
-+#define X1205_REG_DW 0x36
-+#define X1205_REG_YR 0x35
-+#define X1205_REG_MO 0x34
-+#define X1205_REG_DT 0x33
-+#define X1205_REG_HR 0x32
-+#define X1205_REG_MN 0x31
-+#define X1205_REG_SC 0x30
-+#define X1205_REG_DTR 0x13
-+#define X1205_REG_ATR 0x12
-+#define X1205_REG_INT 0x11
-+#define X1205_REG_0 0x10
-+#define X1205_REG_Y2K1 0x0F
-+#define X1205_REG_DWA1 0x0E
-+#define X1205_REG_YRA1 0x0D
-+#define X1205_REG_MOA1 0x0C
-+#define X1205_REG_DTA1 0x0B
-+#define X1205_REG_HRA1 0x0A
-+#define X1205_REG_MNA1 0x09
-+#define X1205_REG_SCA1 0x08
-+#define X1205_REG_Y2K0 0x07
-+#define X1205_REG_DWA0 0x06
-+#define X1205_REG_YRA0 0x05
-+#define X1205_REG_MOA0 0x04
-+#define X1205_REG_DTA0 0x03
-+#define X1205_REG_HRA0 0x02
-+#define X1205_REG_MNA0 0x01
-+#define X1205_REG_SCA0 0x00
-+
-+#define X1205_CCR_BASE 0x30 /* Base address of CCR */
-+#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
-+
-+#define X1205_SR_RTCF 0x01 /* Clock failure */
-+#define X1205_SR_WEL 0x02 /* Write Enable Latch */
-+#define X1205_SR_RWEL 0x04 /* Register Write Enable */
-+
-+#define X1205_DTR_DTR0 0x01
-+#define X1205_DTR_DTR1 0x02
-+#define X1205_DTR_DTR2 0x04
-+
-+#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
-+
-+/* Prototypes */
-+static int x1205_attach(struct i2c_adapter *adapter);
-+static int x1205_detach(struct i2c_client *client);
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
-+
-+static struct i2c_driver x1205_driver = {
-+ .owner = THIS_MODULE,
-+ .name = "x1205",
-+ .flags = I2C_DF_NOTIFY,
-+ .attach_adapter = &x1205_attach,
-+ .detach_client = &x1205_detach,
-+};
-+
-+/*
-+ * In the routines that deal directly with the x1205 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-+ * Epoch is initialized as 2000. Time is set to UTC.
-+ */
-+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ unsigned char reg_base)
-+{
-+ unsigned char dt_addr[2] = { 0, reg_base };
-+
-+ unsigned char buf[8];
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, dt_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 8, buf }, /* read date */
-+ };
-+
-+ /* read date registers */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ dev_dbg(&client->dev,
-+ "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
-+ "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
-+ __FUNCTION__,
-+ buf[0], buf[1], buf[2], buf[3],
-+ buf[4], buf[5], buf[6], buf[7]);
-+
-+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
-+ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
-+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
-+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
-+ tm->tm_year = BCD2BIN(buf[CCR_YEAR])
-+ + (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900;
-+ tm->tm_wday = buf[CCR_WDAY];
-+
-+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ return 0;
-+}
-+
-+static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
-+{
-+ static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, sr_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 1, sr }, /* read status */
-+ };
-+
-+ /* read status register */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
-+ int datetoo, u8 reg_base)
-+{
-+ int i, xfer;
-+ unsigned char buf[8];
-+
-+ static const unsigned char wel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL };
-+
-+ static const unsigned char rwel[3] = { 0, X1205_REG_SR,
-+ X1205_SR_WEL | X1205_SR_RWEL };
-+
-+ static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-+
-+ dev_dbg(&client->dev,
-+ "%s: secs=%d, mins=%d, hours=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour);
-+
-+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
-+ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-+
-+ /* set hour and 24hr bit */
-+ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
-+
-+ /* should we also set the date? */
-+ if (datetoo) {
-+ dev_dbg(&client->dev,
-+ "%s: mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-+
-+ /* month, 1 - 12 */
-+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1);
-+
-+ /* year, since the rtc epoch*/
-+ buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100);
-+ buf[CCR_WDAY] = tm->tm_wday & 0x07;
-+ buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
-+ }
-+
-+ /* this sequence is required to unlock the chip */
-+ xfer = i2c_master_send(client, wel, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ xfer = i2c_master_send(client, rwel, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ /* write register's data */
-+ for (i = 0; i < (datetoo ? 8 : 3); i++) {
-+ unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
-+
-+ xfer = i2c_master_send(client, rdata, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev,
-+ "%s: xfer=%d addr=%02x, data=%02x\n",
-+ __FUNCTION__,
-+ xfer, rdata[1], rdata[2]);
-+ return -EIO;
-+ }
-+ };
-+
-+ /* disable further writes */
-+ xfer = i2c_master_send(client, diswe, 3);
-+ if (xfer != 3) {
-+ dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int x1205_fix_osc(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_time tm;
-+
-+ tm.tm_hour = 0;
-+ tm.tm_min = 0;
-+ tm.tm_sec = 0;
-+
-+ if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
-+ dev_err(&client->dev,
-+ "unable to restart the clock\n");
-+
-+ return err;
-+}
-+
-+static int x1205_get_dtrim(struct i2c_client *client, int *trim)
-+{
-+ unsigned char dtr;
-+ static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
-+ };
-+
-+ /* read dtr register */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
-+
-+ *trim = 0;
-+
-+ if (dtr & X1205_DTR_DTR0)
-+ *trim += 20;
-+
-+ if (dtr & X1205_DTR_DTR1)
-+ *trim += 10;
-+
-+ if (dtr & X1205_DTR_DTR2)
-+ *trim = -*trim;
-+
-+ return 0;
-+}
-+
-+static int x1205_get_atrim(struct i2c_client *client, int *trim)
-+{
-+ s8 atr;
-+ static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, atr_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
-+ };
-+
-+ /* read atr register */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
-+
-+ /* atr is a two's complement value on 6 bits,
-+ * perform sign extension. The formula is
-+ * Catr = (atr * 0.25pF) + 11.00pF.
-+ */
-+ if (atr & 0x20)
-+ atr |= 0xC0;
-+
-+ dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
-+
-+ *trim = (atr * 250) + 11000;
-+
-+ dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
-+
-+ return 0;
-+}
-+
-+static int x1205_hctosys(struct i2c_client *client)
-+{
-+ int err;
-+
-+ struct rtc_time tm;
-+ struct timespec tv;
-+ unsigned char sr;
-+
-+ if ((err = x1205_get_status(client, &sr)) < 0)
-+ return err;
-+
-+ /* Don't set if we had a power failure */
-+ if (sr & X1205_SR_RTCF)
-+ return -EINVAL;
-+
-+ if ((err = x1205_get_datetime(client, &tm, X1205_CCR_BASE)) < 0)
-+ return err;
-+
-+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
-+ * whether it stores the most close value or the value with partial
-+ * seconds truncated. However, it is important that we use it to store
-+ * the truncated value. This is because otherwise it is necessary,
-+ * in an rtc sync function, to read both xtime.tv_sec and
-+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
-+ * of >32bits is not possible. So storing the most close value would
-+ * slow down the sync API. So here we have the truncated value and
-+ * the best guess is to add 0.5s.
-+ */
-+
-+ tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+ rtc_tm_to_time(&tm, &tv.tv_sec);
-+
-+ do_settimeofday(&tv);
-+
-+ dev_info(&client->dev,
-+ "setting the system clock to %d-%d-%d %d:%d:%d\n",
-+ tm.tm_year + 1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour, tm.tm_min,
-+ tm.tm_sec);
-+
-+ return 0;
-+}
-+
-+struct x1205_limit
-+{
-+ unsigned char reg;
-+ unsigned char mask;
-+ unsigned char min;
-+ unsigned char max;
-+};
-+
-+static int x1205_validate_client(struct i2c_client *client)
-+{
-+ int i, xfer;
-+
-+ /* Probe array. We will read the register at the specified
-+ * address and check if the given bits are zero.
-+ */
-+ static const unsigned char probe_zero_pattern[] = {
-+ /* register, mask */
-+ X1205_REG_SR, 0x18,
-+ X1205_REG_DTR, 0xF8,
-+ X1205_REG_ATR, 0xC0,
-+ X1205_REG_INT, 0x18,
-+ X1205_REG_0, 0xFF,
-+ };
-+
-+ static const struct x1205_limit probe_limits_pattern[] = {
-+ /* register, mask, min, max */
-+ { X1205_REG_Y2K, 0xFF, 19, 20 },
-+ { X1205_REG_DW, 0xFF, 0, 6 },
-+ { X1205_REG_YR, 0xFF, 0, 99 },
-+ { X1205_REG_MO, 0xFF, 0, 12 },
-+ { X1205_REG_DT, 0xFF, 0, 31 },
-+ { X1205_REG_HR, 0x7F, 0, 23 },
-+ { X1205_REG_MN, 0xFF, 0, 59 },
-+ { X1205_REG_SC, 0xFF, 0, 59 },
-+ { X1205_REG_Y2K1, 0xFF, 19, 20 },
-+ { X1205_REG_Y2K0, 0xFF, 19, 20 },
-+ };
-+
-+ /* check that registers have bits a 0 where expected */
-+ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
-+ unsigned char buf;
-+
-+ unsigned char addr[2] = { 0, probe_zero_pattern[i] };
-+
-+ struct i2c_msg msgs[2] = {
-+ { client->addr, 0, 2, addr },
-+ { client->addr, I2C_M_RD, 1, &buf },
-+ };
-+
-+ xfer = i2c_transfer(client->adapter, msgs, 2);
-+ if (xfer != 2) {
-+ dev_err(&client->adapter->dev,
-+ "%s: could not read register %x\n",
-+ __FUNCTION__, addr[1]);
-+
-+ return -EIO;
-+ }
-+
-+ if ((buf & probe_zero_pattern[i+1]) != 0) {
-+ dev_err(&client->adapter->dev,
-+ "%s: register=%02x, zero pattern=%d, value=%x\n",
-+ __FUNCTION__, addr[1], i, buf);
-+
-+ return -ENODEV;
-+ }
-+ }
-+
-+ /* check limits (only registers with bcd values) */
-+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
-+ unsigned char reg, value;
-+
-+ unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
-+
-+ struct i2c_msg msgs[2] = {
-+ { client->addr, 0, 2, addr },
-+ { client->addr, I2C_M_RD, 1, ® },
-+ };
-+
-+ xfer = i2c_transfer(client->adapter, msgs, 2);
-+
-+ if (xfer != 2) {
-+ dev_err(&client->adapter->dev,
-+ "%s: could not read register %x\n",
-+ __FUNCTION__, addr[1]);
-+
-+ return -EIO;
-+ }
-+
-+ value = BCD2BIN(reg & probe_limits_pattern[i].mask);
-+
-+ if (value > probe_limits_pattern[i].max ||
-+ value < probe_limits_pattern[i].min) {
-+ dev_dbg(&client->adapter->dev,
-+ "%s: register=%x, lim pattern=%d, value=%d\n",
-+ __FUNCTION__, addr[1], i, value);
-+
-+ return -ENODEV;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int x1205_rtc_read_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return x1205_get_datetime(to_i2c_client(dev),
-+ &alrm->time, X1205_ALM0_BASE);
-+}
-+
-+static int x1205_rtc_set_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return x1205_set_datetime(to_i2c_client(dev),
-+ &alrm->time, 1, X1205_ALM0_BASE);
-+}
-+
-+static int x1205_rtc_read_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ return x1205_get_datetime(to_i2c_client(dev),
-+ tm, X1205_CCR_BASE);
-+}
-+
-+static int x1205_rtc_set_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ return x1205_set_datetime(to_i2c_client(dev),
-+ tm, 1, X1205_CCR_BASE);
-+}
-+
-+static int x1205_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+ int err;
-+
-+ struct rtc_time new_tm, old_tm;
-+
-+ if ((err = x1205_rtc_read_time(dev, &old_tm) == 0))
-+ return err;
-+
-+ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */
-+ new_tm.tm_sec = secs % 60;
-+ secs /= 60;
-+ new_tm.tm_min = secs % 60;
-+ secs /= 60;
-+ new_tm.tm_hour = secs % 24;
-+
-+ /*
-+ * avoid writing when we're going to change the day
-+ * of the month. We will retry in the next minute.
-+ * This basically means that if the RTC must not drift
-+ * by more than 1 minute in 11 minutes.
-+ */
-+ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
-+ (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
-+ return 1;
-+
-+ return x1205_rtc_set_time(dev, &new_tm);
-+}
-+
-+static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
-+{
-+ int err, dtrim, atrim;
-+
-+ seq_printf(seq, "24hr\t\t: yes\n");
-+
-+ err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
-+ if (err == 0)
-+ seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
-+
-+ err = x1205_get_atrim(to_i2c_client(dev), &atrim);
-+ if (err == 0)
-+ seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
-+ atrim / 1000, atrim % 1000);
-+ return 0;
-+}
-+
-+static struct rtc_class_ops x1205_rtc_ops = {
-+ .proc = x1205_rtc_proc,
-+ .read_time = x1205_rtc_read_time,
-+ .set_time = x1205_rtc_set_time,
-+ .read_alarm = x1205_rtc_read_alarm,
-+ .set_alarm = x1205_rtc_set_alarm,
-+ .set_mmss = x1205_rtc_set_mmss,
-+};
-+
-+static ssize_t x1205_sysfs_show_atrim(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ int atrim;
-+
-+ if (x1205_get_atrim(to_i2c_client(dev), &atrim) == 0) {
-+ return sprintf(buf, "%d.%02d pF\n",
-+ atrim / 1000, atrim % 1000); }
-+ return 0;
-+}
-+static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);
-+
-+static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ int dtrim;
-+
-+ if (x1205_get_dtrim(to_i2c_client(dev), &dtrim) == 0) {
-+ return sprintf(buf, "%d ppm\n", dtrim);
-+ }
-+ return 0;
-+}
-+static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
-+
-+
-+static int x1205_attach(struct i2c_adapter *adapter)
-+{
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ return i2c_probe(adapter, &addr_data, x1205_probe);
-+}
-+
-+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+ int err = 0;
-+ unsigned char sr;
-+ struct i2c_client *client;
-+ struct rtc_device *rtc;
-+
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-+ err = -ENODEV;
-+ goto exit;
-+ }
-+
-+ if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ /* I2C client */
-+ client->addr = address;
-+ client->driver = &x1205_driver;
-+ client->adapter = adapter;
-+
-+ strlcpy(client->name, x1205_driver.name, I2C_NAME_SIZE);
-+
-+ /* Verify the chip is really an X1205 */
-+ if (kind < 0) {
-+ if (x1205_validate_client(client) < 0) {
-+ err = -ENODEV;
-+ goto exit_kfree;
-+ }
-+ }
-+
-+ /* Inform the i2c layer */
-+ if ((err = i2c_attach_client(client)))
-+ goto exit_kfree;
-+
-+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+
-+ rtc = rtc_device_register(x1205_driver.name, &client->dev,
-+ &x1205_rtc_ops, THIS_MODULE);
-+
-+ if (IS_ERR(rtc)) {
-+ err = PTR_ERR(rtc);
-+ dev_err(&client->dev,
-+ "unable to register the class device\n");
-+ goto exit_detach;
-+ }
-+
-+ i2c_set_clientdata(client, rtc);
-+
-+ /* Check for power failures and eventualy enable the osc */
-+ if ((err = x1205_get_status(client, &sr)) == 0) {
-+ if (sr & X1205_SR_RTCF) {
-+ dev_err(&client->dev,
-+ "power failure detected, "
-+ "please set the clock\n");
-+ udelay(50);
-+ x1205_fix_osc(client);
-+ }
-+ }
-+ else
-+ dev_err(&client->dev, "couldn't read status\n");
-+
-+ /* If requested, set the system time */
-+ if (hctosys) {
-+ if ((err = x1205_hctosys(client)) < 0)
-+ dev_err(&client->dev,
-+ "unable to set the system clock\n");
-+ }
-+
-+ device_create_file(&client->dev, &dev_attr_atrim);
-+ device_create_file(&client->dev, &dev_attr_dtrim);
-+
-+ return 0;
-+
-+exit_detach:
-+ i2c_detach_client(client);
-+
-+exit_kfree:
-+ kfree(client);
-+
-+exit:
-+ return err;
-+}
-+
-+static int x1205_detach(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_device *rtc = i2c_get_clientdata(client);
-+
-+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-+
-+ if (rtc)
-+ rtc_device_unregister(rtc);
-+
-+ if ((err = i2c_detach_client(client)))
-+ return err;
-+
-+ kfree(client);
-+
-+ return 0;
-+}
-+
-+static int __init x1205_init(void)
-+{
-+ return i2c_add_driver(&x1205_driver);
-+}
-+
-+static void __exit x1205_exit(void)
-+{
-+ i2c_del_driver(&x1205_driver);
-+}
-+
-+MODULE_AUTHOR(
-+ "Karen Spearel <kas11@tampabay.rr.com>, "
-+ "Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(x1205_init);
-+module_exit(x1205_exit);
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-test.c 2006-01-04 01:27:19.000000000 +0100
-@@ -0,0 +1,189 @@
-+/*
-+ * An RTC test device/driver
-+ * Copyright (C) 2005 Tower Technologies
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/err.h>
-+#include <linux/rtc.h>
-+#include <linux/platform_device.h>
-+
-+static int test_rtc_read_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_set_alarm(struct device *dev,
-+ struct rtc_wkalrm *alrm)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_read_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ rtc_time_to_tm(get_seconds(), tm);
-+ return 0;
-+}
-+
-+static int test_rtc_set_time(struct device *dev,
-+ struct rtc_time *tm)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+ return 0;
-+}
-+
-+static int test_rtc_proc(struct device *dev, struct seq_file *seq)
-+{
-+ struct platform_device *plat_dev = to_platform_device(dev);
-+
-+ seq_printf(seq, "24hr\t\t: yes\n");
-+ seq_printf(seq, "test\t\t: yes\n");
-+ seq_printf(seq, "id\t\t: %d\n", plat_dev->id);
-+
-+ return 0;
-+}
-+
-+static int test_rtc_ioctl(struct device *dev, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ /* We do support interrupts, they're generated
-+ * using the sysfs interface.
-+ */
-+ switch (cmd) {
-+ case RTC_PIE_ON:
-+ case RTC_PIE_OFF:
-+ case RTC_UIE_ON:
-+ case RTC_UIE_OFF:
-+ case RTC_AIE_ON:
-+ case RTC_AIE_OFF:
-+ return 0;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+static struct rtc_class_ops test_rtc_ops = {
-+ .proc = test_rtc_proc,
-+ .read_time = test_rtc_read_time,
-+ .set_time = test_rtc_set_time,
-+ .read_alarm = test_rtc_read_alarm,
-+ .set_alarm = test_rtc_set_alarm,
-+ .set_mmss = test_rtc_set_mmss,
-+ .ioctl = test_rtc_ioctl,
-+};
-+
-+static ssize_t test_irq_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ return sprintf(buf, "%d\n", 42);
-+}
-+static ssize_t test_irq_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ int retval;
-+ struct platform_device *plat_dev = to_platform_device(dev);
-+ struct rtc_device *rtc = platform_get_drvdata(plat_dev);
-+
-+ retval = count;
-+ if (strncmp(buf, "tick", 4) == 0)
-+ rtc_update_irq(&rtc->class_dev, 1, RTC_PF | RTC_IRQF);
-+ else if (strncmp(buf, "alarm", 5) == 0)
-+ rtc_update_irq(&rtc->class_dev, 1, RTC_AF | RTC_IRQF);
-+ else if (strncmp(buf, "update", 6) == 0)
-+ rtc_update_irq(&rtc->class_dev, 1, RTC_UF | RTC_IRQF);
-+ else
-+ retval = -EINVAL;
-+
-+ return retval;
-+}
-+static DEVICE_ATTR(irq, S_IRUGO | S_IWUSR, test_irq_show, test_irq_store);
-+
-+static int test_probe(struct platform_device *plat_dev)
-+{
-+ int err;
-+ struct rtc_device *rtc = rtc_device_register("test", &plat_dev->dev,
-+ &test_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(rtc)) {
-+ err = PTR_ERR(rtc);
-+ dev_err(&plat_dev->dev,
-+ "unable to register the class device\n");
-+ return err;
-+ }
-+ device_create_file(&plat_dev->dev, &dev_attr_irq);
-+
-+ platform_set_drvdata(plat_dev, rtc);
-+
-+ return 0;
-+}
-+
-+static int test_remove(struct platform_device *plat_dev)
-+{
-+ struct rtc_device *rtc = platform_get_drvdata(plat_dev);
-+
-+ rtc_device_unregister(rtc);
-+ device_remove_file(&plat_dev->dev, &dev_attr_irq);
-+
-+ return 0;
-+}
-+
-+static void test_release(struct device * dev)
-+{
-+}
-+
-+struct platform_device test_dev_zero = {
-+ .name = "rtc-test",
-+ .id = 0,
-+ .dev.release = test_release,
-+};
-+
-+struct platform_device test_dev_one = {
-+ .name = "rtc-test",
-+ .id = 1,
-+ .dev.release = test_release,
-+};
-+
-+struct platform_driver test_drv = {
-+ .probe = test_probe,
-+ .remove = test_remove,
-+ .driver = {
-+ .name = "rtc-test",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init test_init(void)
-+{
-+ platform_device_register(&test_dev_zero);
-+ platform_device_register(&test_dev_one);
-+ platform_driver_register(&test_drv);
-+
-+ return 0;
-+}
-+
-+static void __exit test_exit(void)
-+{
-+ platform_driver_unregister(&test_drv);
-+ platform_device_unregister(&test_dev_zero);
-+ platform_device_unregister(&test_dev_one);
-+}
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("RTC test driver/device");
-+MODULE_LICENSE("GPL");
-+
-+module_init(test_init);
-+module_exit(test_exit);
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-nslu2/drivers/rtc/rtc-ds1672.c 2006-01-04 01:27:21.000000000 +0100
-@@ -0,0 +1,266 @@
-+/*
-+ * An rtc/i2c driver for the Dallas DS1672
-+ * Copyright 2005 Alessandro Zummo
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/i2c.h>
-+#include <linux/rtc.h>
-+
-+#define DRV_VERSION "0.1"
-+
-+/* Addresses to scan: none. This chip cannot be detected. */
-+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD;
-+I2C_CLIENT_MODULE_PARM(hctosys,
-+ "Set the system time from the hardware clock upon initialization");
-+
-+/* Registers */
-+
-+#define DS1672_REG_CNT_BASE 0
-+#define DS1672_REG_CONTROL 4
-+#define DS1672_REG_TRICKLE 5
-+
-+
-+/* Prototypes */
-+static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind);
-+
-+/*
-+ * In the routines that deal directly with the ds1672 hardware, we use
-+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
-+ * Epoch is initialized as 2000. Time is set to UTC.
-+ */
-+static int ds1672_get_datetime(struct i2c_client *client, struct rtc_time *tm)
-+{
-+ unsigned long time;
-+ unsigned char buf[4];
-+
-+ dev_dbg(&client->dev,
-+ "%s: raw read data - counters=%02x,%02x,%02x,%02x\n"
-+ __FUNCTION__,
-+ buf[0], buf[1], buf[2], buf[3]);
-+
-+ time = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
-+
-+ rtc_time_to_tm(time, tm);
-+
-+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ return 0;
-+}
-+
-+static int ds1672_set_mmss(struct i2c_client *client, unsigned long secs)
-+{
-+ int xfer;
-+ unsigned char buf[5];
-+
-+ buf[0] = DS1672_REG_CNT_BASE;
-+ buf[1] = secs & 0x000000FF;
-+ buf[2] = (secs & 0x0000FF00) >> 8;
-+ buf[3] = (secs & 0x00FF0000) >> 16;
-+ buf[4] = (secs & 0xFF000000) >> 24;
-+
-+ xfer = i2c_master_send(client, buf, 5);
-+ if (xfer != 5) {
-+ dev_err(&client->dev, "%s: send: %d\n", __FUNCTION__, xfer);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int ds1672_set_datetime(struct i2c_client *client, struct rtc_time *tm)
-+{
-+ unsigned long secs;
-+
-+ dev_dbg(&client->dev,
-+ "%s: secs=%d, mins=%d, hours=%d, ",
-+ "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_sec, tm->tm_min, tm->tm_hour,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
-+ rtc_tm_to_time(tm, &secs);
-+
-+ return ds1672_set_mmss(client, secs);
-+}
-+
-+static int ds1672_hctosys(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_time tm;
-+ struct timespec tv;
-+
-+ if ((err = ds1672_get_datetime(client, &tm)) != 0)
-+ return err;
-+
-+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
-+ * whether it stores the most close value or the value with partial
-+ * seconds truncated. However, it is important that we use it to store
-+ * the truncated value. This is because otherwise it is necessary,
-+ * in an rtc sync function, to read both xtime.tv_sec and
-+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
-+ * of >32bits is not possible. So storing the most close value would
-+ * slow down the sync API. So here we have the truncated value and
-+ * the best guess is to add 0.5s.
-+ */
-+
-+ tv.tv_nsec = NSEC_PER_SEC >> 1;
-+
-+ rtc_tm_to_time(&tm, &tv.tv_sec);
-+
-+ do_settimeofday(&tv);
-+
-+ dev_info(&client->dev,
-+ "setting the system clock to %d-%02d-%02d %02d:%02d:%02d\n",
-+ tm.tm_year + 1900, tm.tm_mon + 1,
-+ tm.tm_mday, tm.tm_hour, tm.tm_min,
-+ tm.tm_sec);
-+
-+ return 0;
-+}
-+
-+static int ds1672_rtc_read_time(struct device *dev, struct rtc_time *tm)
-+{
-+ return ds1672_get_datetime(to_i2c_client(dev), tm);
-+}
-+
-+static int ds1672_rtc_set_time(struct device *dev, struct rtc_time *tm)
-+{
-+ return ds1672_set_datetime(to_i2c_client(dev), tm);
-+}
-+
-+static int ds1672_rtc_set_mmss(struct device *dev, unsigned long secs)
-+{
-+ return ds1672_set_mmss(to_i2c_client(dev), secs);
-+}
-+
-+static struct rtc_class_ops ds1672_rtc_ops = {
-+ .read_time = ds1672_rtc_read_time,
-+ .set_time = ds1672_rtc_set_time,
-+ .set_mmss = ds1672_rtc_set_mmss,
-+};
-+
-+static int ds1672_attach(struct i2c_adapter *adapter)
-+{
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ return i2c_probe(adapter, &addr_data, ds1672_probe);
-+}
-+
-+static int ds1672_detach(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_device *rtc = i2c_get_clientdata(client);
-+
-+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-+
-+ if (rtc)
-+ rtc_device_unregister(rtc);
-+
-+ if ((err = i2c_detach_client(client)))
-+ return err;
-+
-+ kfree(client);
-+
-+ return 0;
-+}
-+
-+static struct i2c_driver ds1672_driver = {
-+ .owner = THIS_MODULE,
-+ .name = "ds1672",
-+ .flags = I2C_DF_NOTIFY,
-+ .attach_adapter = &ds1672_attach,
-+ .detach_client = &ds1672_detach,
-+};
-+
-+static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind)
-+{
-+ int err = 0;
-+ struct i2c_client *client;
-+ struct rtc_device *rtc;
-+
-+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
-+ err = -ENODEV;
-+ goto exit;
-+ }
-+
-+ if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ /* I2C client */
-+ client->addr = address;
-+ client->driver = &ds1672_driver;
-+ client->adapter = adapter;
-+
-+ strlcpy(client->name, ds1672_driver.name, I2C_NAME_SIZE);
-+
-+ /* Inform the i2c layer */
-+ if ((err = i2c_attach_client(client)))
-+ goto exit_kfree;
-+
-+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-+
-+ rtc = rtc_device_register(ds1672_driver.name, &client->dev,
-+ &ds1672_rtc_ops, THIS_MODULE);
-+
-+ if (IS_ERR(rtc)) {
-+ err = PTR_ERR(rtc);
-+ dev_err(&client->dev,
-+ "unable to register the class device\n");
-+ goto exit_detach;
-+ }
-+
-+ i2c_set_clientdata(client, rtc);
-+
-+ /* If requested, set the system time */
-+ if (hctosys) {
-+ if ((err = ds1672_hctosys(client)) < 0)
-+ dev_err(&client->dev,
-+ "unable to set the system clock\n");
-+ }
-+
-+ return 0;
-+
-+exit_detach:
-+ i2c_detach_client(client);
-+
-+exit_kfree:
-+ kfree(client);
-+
-+exit:
-+ return err;
-+}
-+
-+static int __init ds1672_init(void)
-+{
-+ return i2c_add_driver(&ds1672_driver);
-+}
-+
-+static void __exit ds1672_exit(void)
-+{
-+ i2c_del_driver(&ds1672_driver);
-+}
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("Dallas/Maxim DS1672 timekeeper driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(ds1672_init);
-+module_exit(ds1672_exit);
+++ /dev/null
- drivers/input/misc/Kconfig | 12 +++
- drivers/input/misc/Makefile | 1
- drivers/input/misc/nslu2spkr.c | 148 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 161 insertions(+)
-
---- linux-2.6.15/drivers/input/misc/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
- tristate "M68k Beeper support"
- depends on M68K
-
-+config INPUT_NSLU2_BEEPER
-+ tristate "NSLU2 Beeper support"
-+ depends on MACH_NSLU2
-+ help
-+ Say Y here if you want the embedded beeper on the LinkSys NSLU2
-+ to be used for bells and whistles.
-+
-+ If unsure, say Y.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called nslu2spkr.
-+
- config INPUT_UINPUT
- tristate "User level driver support"
- help
---- linux-2.6.15/drivers/input/misc/Makefile 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/Makefile 1970-01-01 00:00:00.000000000 +0000
-@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68ksp
- obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o
- obj-$(CONFIG_INPUT_UINPUT) += uinput.o
- obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
-+obj-$(CONFIG_INPUT_NSLU2_BEEPER) += nslu2spkr.o
---- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,148 @@
-+/*
-+ * drivers/input/misc/nslu2spkr.c
-+ *
-+ * NSLU2 Beeper driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/delay.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+
-+static unsigned int beep_on_startup = 1;
-+module_param(beep_on_startup, bool, 0);
-+MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup");
-+
-+DEFINE_SPINLOCK(beep_lock);
-+
-+static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-+{
-+ unsigned int count = 0;
-+ unsigned long flags;
-+
-+ if (type != EV_SND)
-+ return -1;
-+
-+ switch (code) {
-+ case SND_BELL:
-+ if (value) value = 1000;
-+ case SND_TONE:
-+ break;
-+ default:
-+ return -1;
-+ }
-+
-+ if (value > 20 && value < 32767)
-+ count = (NSLU2_FREQ / (value*4)) - 1;
-+
-+ spin_lock_irqsave(&beep_lock, flags);
-+
-+ if (count) {
-+
-+ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT);
-+ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW);
-+
-+ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+
-+ } else {
-+
-+ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN);
-+ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH);
-+
-+ *IXP4XX_OSRT2 = 0;
-+ }
-+
-+ spin_unlock_irqrestore(&beep_lock, flags);
-+
-+ return 0;
-+}
-+
-+static struct input_dev nslu2_spkr_dev = {
-+ .phys = "ixp420/gpio4",
-+ .name = "NSLU2 Beeper",
-+ .evbit[0] = BIT(EV_SND),
-+ .sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE),
-+ .event = nslu2_spkr_event,
-+ .id = {
-+ .bustype = BUS_HOST,
-+ .vendor = 0x001f,
-+ .product = 0x0001,
-+ .version = 0x0100
-+ }
-+};
-+
-+static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ /* clear interrupt */
-+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
-+
-+ /* flip the beeper output */
-+ *IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM;
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init nslu2_spkr_init(void)
-+{
-+ if (!(machine_is_nslu2()))
-+ return -ENODEV;
-+
-+ if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler,
-+ SA_INTERRUPT | SA_TIMER, "nslu2-beeper", NULL < 0)) {
-+
-+ printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n",
-+ IRQ_IXP4XX_TIMER2);
-+
-+ return -EIO;
-+ }
-+
-+ input_register_device(&nslu2_spkr_dev);
-+
-+ /* do a little beep to tell the world we are alive */
-+ if (beep_on_startup)
-+ {
-+ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440);
-+ msleep(120);
-+ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0);
-+ }
-+
-+ printk(KERN_INFO "NSLU2: beeper\n");
-+ return 0;
-+}
-+
-+static void __exit nslu2_spkr_exit(void)
-+{
-+ input_unregister_device(&nslu2_spkr_dev);
-+
-+ disable_irq(IRQ_IXP4XX_TIMER2);
-+
-+ /* turn it off */
-+ nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0);
-+
-+ free_irq(IRQ_IXP4XX_TIMER2, NULL);
-+}
-+
-+module_init(nslu2_spkr_init);
-+module_exit(nslu2_spkr_exit);
-+
-+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-+MODULE_DESCRIPTION("NSLU2 Beeper driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
- arch/arm/Kconfig | 8 -
- arch/arm/mach-ixp4xx/Makefile | 4
- arch/arm/mach-ixp4xx/nslu2-leds.c | 223 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 232 insertions(+), 3 deletions(-)
-
---- linux-2.6.15/arch/arm/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -418,7 +418,8 @@ config LEDS
- ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
- ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
- ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
-- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
-+ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-+ MACH_NSLU2
- help
- If you say Y here, the LEDs on your machine will be used
- to provide useful information about your current system status.
-@@ -432,7 +433,7 @@ config LEDS
-
- config LEDS_TIMER
- bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
-- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2
- depends on LEDS
- default y if ARCH_EBSA110
- help
-@@ -448,7 +449,8 @@ config LEDS_TIMER
-
- config LEDS_CPU
- bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
-- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
-+ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \
-+ || MACH_NSLU2
- depends on LEDS
- help
- If you say Y here, the red LED will be used to give a good real
---- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
- obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
-
-+leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o
-+obj-$(CONFIG_LEDS) += $(leds-y)
-+
-+
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,223 @@
-+/*
-+ * arch/arm/mach-ixp4xx/nslu2-leds.c
-+ *
-+ * NSLU2 LEDs driver
-+ *
-+ * Copyright (C) 2005 Tower Technologies
-+ *
-+ * based on nslu2-io.c
-+ * Copyright (C) 2004 Karen Spearel
-+ * and arch/arm/mach-footbridge/netwinder-leds.c
-+ * Copyright (C) 1998-1999 Russell King
-+ *
-+ * Author: Alessandro Zummo <a.zummo@towertech.it>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/spinlock.h>
-+#include <linux/notifier.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/system.h>
-+
-+#define LED_STATE_ENABLED 0x01
-+#define LED_STATE_CLAIMED 0x02
-+#define LED_STATE_IDLE 0x04
-+
-+static unsigned char led_state;
-+static unsigned int hw_led_state;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+static const unsigned long idle_seq[4] = {
-+ NSLU2_LED_GRN_BM, 0,
-+ NSLU2_LED_GRN_BM, 0,
-+};
-+
-+static const unsigned long busy_seq[4] = {
-+ NSLU2_LED_GRN_BM, 0,
-+ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0,
-+};
-+#endif
-+
-+static unsigned char led_count = 0;
-+
-+static DEFINE_SPINLOCK(leds_lock);
-+extern spinlock_t gpio_lock;
-+
-+static void nslu2_leds_event(led_event_t evt)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&leds_lock, flags);
-+
-+ switch (evt) {
-+ case led_start:
-+ /* Let's rock! Red led on, all others off. Remember
-+ * that disk1/disk2 works inverted.
-+ */
-+ led_state = LED_STATE_ENABLED;
-+ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM
-+ | NSLU2_LED_RED_BM;
-+ break;
-+
-+ case led_stop:
-+ led_state &= ~LED_STATE_ENABLED;
-+ break;
-+
-+ case led_claim:
-+ /* The user claimed the interface, red and green off */
-+ led_state |= LED_STATE_CLAIMED;
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_release:
-+ /* The user released the interface, preserve the last
-+ * status of the leds, except red/green.
-+ */
-+ led_state &= ~LED_STATE_CLAIMED;
-+ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C;
-+ break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+ case led_timer:
-+ /* Pulse green led */
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ {
-+ /* clear red and green bits */
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+
-+ /* copy the right sequence in */
-+ if (led_state & LED_STATE_IDLE)
-+ hw_led_state |= idle_seq[led_count % 4];
-+ else
-+ hw_led_state |= busy_seq[led_count % 4];
-+
-+ led_count++;
-+ }
-+ break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+ case led_idle_start:
-+ led_state |= LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+ /* green on, red off */
-+ hw_led_state |= NSLU2_LED_GRN_BM;
-+ hw_led_state &= ~NSLU2_LED_RED_BM;
-+#endif
-+ break;
-+
-+ case led_idle_end:
-+ led_state &= ~LED_STATE_IDLE;
-+#ifndef CONFIG_LEDS_TIMER
-+ /* green on, red on -> amber on */
-+ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM;
-+#endif
-+ break;
-+#endif /* CONFIG_LEDS_CPU */
-+
-+ case led_halted:
-+ if (!(led_state & LED_STATE_CLAIMED))
-+ hw_led_state |= NSLU2_LED_RED_BM;
-+ break;
-+
-+ /* leds */
-+
-+ case led_green_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= NSLU2_LED_GRN_BM;
-+ break;
-+
-+ case led_green_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~NSLU2_LED_GRN_BM;
-+ break;
-+
-+ case led_amber_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_amber_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
-+ break;
-+
-+ case led_red_on:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state |= NSLU2_LED_RED_BM;
-+ break;
-+
-+ case led_red_off:
-+ if (led_state & LED_STATE_CLAIMED)
-+ hw_led_state &= ~NSLU2_LED_RED_BM;
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ spin_unlock_irqrestore(&leds_lock, flags);
-+
-+ if (led_state & LED_STATE_ENABLED) {
-+ spin_lock_irqsave(&gpio_lock, flags);
-+ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state;
-+ spin_unlock_irqrestore(&gpio_lock, flags);
-+ }
-+}
-+
-+static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event,
-+ void *ptr)
-+{
-+#ifdef CONFIG_LEDS_TIMER
-+ leds_event(led_claim);
-+#endif
-+ leds_event(led_green_off);
-+ leds_event(led_red_on);
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block nslu2_leds_panic_block = {
-+ .notifier_call = nslu2_leds_panic_event,
-+};
-+
-+static int __init nslu2_leds_init(void)
-+{
-+ if (!(machine_is_nslu2()))
-+ return 0;
-+
-+ printk(KERN_INFO "NSLU2: leds\n");
-+
-+ /* register panic notifier */
-+ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block);
-+
-+ /* enable gpio 0-3 */
-+ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT);
-+ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT);
-+
-+ leds_event = nslu2_leds_event;
-+
-+ /* this will also initialize the leds to the
-+ * default state.
-+ */
-+
-+ leds_event(led_start);
-+
-+ return 0;
-+}
-+
-+module_init(nslu2_leds_init);
+++ /dev/null
---- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
-@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
- obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
--obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
-+obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-io.o
-
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,548 @@
-+//=============================================================================
-+//
-+// n2-io.c version 0.1.7
-+// Author: Karen Spearel <kas11 at tampabay.rr.com>
-+// please report problems/bugs directly to the address above
-+//
-+// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per
-+// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk
-+//
-+// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD,
-+// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT
-+// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER
-+// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS.
-+//
-+//=============================================================================
-+// GPIO Function State
-+// 0 Red LED Status
-+// 1 Green LED Ready = 1
-+// 2 Disk 2 LED On = 0
-+// 3 Disk 1 LED On = 0
-+// 4 Buzzer
-+// 5 Power Button Pressed = 1
-+// 8 Power Down Output = 1 powers down NSLU2
-+// 12 Reset Pressed = 0
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/proc_fs.h>
-+#include <linux/device.h>
-+#include <linux/reboot.h>
-+
-+#include <asm/uaccess.h>
-+#include <asm-arm/irq.h>
-+#include <asm-arm/delay.h>
-+
-+/* Set this to 1 to output lots of debug messages. */
-+#define NSLU2_IO_DEBUG 0
-+
-+#if NSLU2_IO_DEBUG
-+#define nslu2_io_debug(args) printk args
-+#else
-+#define nslu2_io_debug(args) ((void)0)
-+#endif
-+
-+#define VERSION "0.1.7"
-+
-+#define NSLU2BZ_MAJOR 62 //buzzer
-+#define NSLU2LM_MAJOR 126
-+
-+
-+#define NSLU2_BEEP_DUR_LONG 2000
-+#define NSLU2_BEEP_DUR_MED 400
-+#define NSLU2_BEEP_DUR_SHORT 100
-+#define NSLU2_BEEP_PITCH_HIGH 250
-+#define NSLU2_BEEP_PITCH_MED 500
-+#define NSLU2_BEEP_PITCH_LOW 1000
-+#define NSLU2_LONG_DELAY 30000
-+
-+#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
-+
-+// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe
-+
-+#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible
-+#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults
-+#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults
-+#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000
-+#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies
-+#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies
-+#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever
-+#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long
-+
-+#define NSLU2LM_OFF _IOW('M',32,long)
-+#define NSLU2LM_ON _IOW('M',33,long)
-+#define NSLU2LM_BLINK _IOW('M',34,long)
-+#define NSLU2LM_ALT _IOW('M',35,long)
-+#define NSLU2LM_ALL_ON _IO('M',36)
-+#define NSLU2LM_ALL_OFF _IO('M',37)
-+
-+#define PHYS_LEDS 4
-+#define BLINK_DELAY 25
-+
-+// OR Masks to turn these LEDs ON
-+
-+#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010
-+#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001
-+#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011
-+
-+// AND Masks to turn these LEDs OFF
-+
-+#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101
-+#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110
-+#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100
-+
-+// AND Masks to turn these LEDs ON
-+
-+#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
-+#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
-+
-+// Or Masks to turn these LEDs OFF
-+
-+#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
-+#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
-+
-+// EOR masks for toggling LEDs on/off
-+
-+#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits
-+#define RS_GRN_TGL 0x00000002
-+#define RS_RED_TGL 0x00000001
-+#define DISK1_TGL 0x00000008
-+#define DISK2_TGL 0x00000004
-+
-+// The LED names for switches
-+
-+#define LED_RS_RED 0
-+#define LED_RS_GRN 1
-+#define LED_DISK1 2
-+#define LED_DISK2 3
-+#define LED_ALL 4
-+
-+static unsigned long ontime = 50;
-+static unsigned long offtime = 450;
-+static unsigned long bz_repeatcnt = 10;
-+static unsigned long tone = 1000;
-+
-+static struct timer_list n2lm_rsg_timer; //rs green
-+static struct timer_list n2lm_rsr_timer; //rs red
-+static struct timer_list n2lm_d1_timer; //drive 1
-+static struct timer_list n2lm_d2_timer; //drive 2
-+static struct timer_list n2bz_timer; //beeper
-+
-+// sysfs class
-+static struct class *n2lm_class;
-+
-+//==================================================================================================
-+//
-+// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the
-+// GPIO output register is xor'd with a mask corresponding to the selected led which simply
-+// flips that bit. No record of what any of the other leds is doing is needed.
-+//
-+//==================================================================================================
-+// this blinks rs green or green/yellow if rs red is on
-+#ifndef CONFIG_LEDS
-+static void n2lm_rsg_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led
-+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout
-+ add_timer(&n2lm_rsg_timer); //reinit timer
-+ return;
-+}
-+
-+// this blinks or alternates rs red green... inited wit green on/red off
-+static void n2lm_rsr_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data;
-+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsr_timer);
-+ return;
-+}
-+// blinks disk 1
-+static void n2lm_d1_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL;
-+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d1_timer);
-+ return;
-+}
-+// blinks disk 2
-+static void n2lm_d2_handler(unsigned long data)
-+{
-+ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL;
-+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d2_timer);
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_start(unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led));
-+
-+ switch(led) {
-+ case LED_RS_RED:
-+ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsr_timer);
-+ break;
-+
-+ case LED_RS_GRN:
-+ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_rsg_timer);
-+ break;
-+
-+ case LED_DISK1:
-+ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d1_timer);
-+ break;
-+
-+ case LED_DISK2:
-+ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
-+ add_timer(&n2lm_d2_timer);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static void n2lm_timer_stop(unsigned long led)
-+{
-+ switch (led) {
-+ case LED_RS_RED:
-+ del_timer(&n2lm_rsr_timer);
-+ break;
-+ case LED_RS_GRN:
-+ del_timer(&n2lm_rsg_timer);
-+ break;
-+ case LED_DISK1:
-+ del_timer(&n2lm_d1_timer);
-+ break;
-+ case LED_DISK2:
-+ del_timer(&n2lm_d2_timer);
-+ break;
-+ default:
-+ break;
-+ }
-+ return;
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_timer_stop_all(void)
-+{
-+ del_timer(&n2lm_rsg_timer);
-+ del_timer(&n2lm_rsr_timer);
-+ del_timer(&n2lm_d1_timer);
-+ del_timer(&n2lm_d2_timer);
-+ return;
-+}
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledon(unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led));
-+
-+ switch (led) {
-+ case LED_RS_RED:
-+ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1
-+ return;
-+ case LED_RS_GRN:
-+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2
-+ return;
-+ case LED_DISK1:
-+ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7
-+ return;
-+ case LED_DISK2:
-+ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb
-+ return;
-+ case LED_ALL: //all green
-+ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;
-+ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON);
-+ return;
-+ }
-+}
-+
-+//--------------------------------------------------------------------------------------------------
-+
-+static void n2lm_ledoff(unsigned long led)
-+{
-+
-+ switch (led) {
-+ case LED_RS_RED:
-+ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe
-+ return;
-+ case LED_RS_GRN:
-+ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd
-+ return;
-+ case LED_DISK1:
-+ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008
-+ return;
-+ case LED_DISK2:
-+ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004
-+ return;
-+ case LED_ALL:
-+ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF);
-+ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF);
-+ }
-+}
-+
-+//==================================================================================================
-+
-+static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led)
-+{
-+
-+ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led));
-+
-+ if (led < 0 || led >= PHYS_LEDS)
-+ return -EINVAL;
-+
-+ switch (cmd ) {
-+ case NSLU2LM_ON:
-+ n2lm_timer_stop(led);
-+ n2lm_ledon(led);
-+ break;
-+
-+ case NSLU2LM_OFF:
-+ n2lm_timer_stop(led);
-+ n2lm_ledoff(led);
-+ break;
-+
-+ case NSLU2LM_BLINK:
-+ n2lm_ledon(led);
-+ if (led == LED_RS_RED)
-+ n2lm_rsr_timer.data = RS_RED_TGL;
-+ n2lm_timer_start(led);
-+ break;
-+
-+ case NSLU2LM_ALT:
-+ if (led == LED_RS_RED)
-+ {
-+ n2lm_ledon(LED_RS_GRN);
-+ n2lm_ledoff(LED_RS_RED);
-+ n2lm_rsr_timer.data = RS_RG_ALT;
-+ n2lm_timer_start(LED_RS_RED);
-+ break;
-+ } else
-+ return -EINVAL;
-+
-+ case NSLU2LM_ALL_ON:
-+ n2lm_timer_stop_all();
-+ n2lm_ledon(LED_ALL);
-+ break;
-+
-+ case NSLU2LM_ALL_OFF:
-+ n2lm_timer_stop_all();
-+ n2lm_ledoff(LED_ALL);
-+ break;
-+
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct file_operations n2lm_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = n2lm_ioctl,
-+};
-+#endif
-+//==================================================================================================
-+// We can't do anything fancy here since the system tick rate is far below that required to
-+// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until
-+// I get up to speed on the timers. The saving grace is that for the normal uses, nothing
-+// important should be haprepening.
-+//==================================================================================================
-+
-+static void n2_buzz(int tone_delay, int duration)
-+{
-+ int i;
-+
-+ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
-+
-+ for (i = 1; i < duration; i++) {
-+ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
-+ udelay(tone_delay);
-+ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
-+ udelay(tone_delay);
-+ }
-+ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
-+
-+ return;
-+}
-+//=================================================================================================
-+
-+// this handles the buzzer duty cycle
-+static void n2bz_handler(unsigned long data)
-+{
-+ if (--bz_repeatcnt > 0) { //if just one beep left to do
-+ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout
-+ add_timer(&n2bz_timer); //reinit timer
-+ }
-+ n2_buzz(tone/2, ontime);
-+ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime));
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param)
-+{
-+ switch (cmd) {
-+ case NSLU2BZ_BEEP:
-+ n2_buzz(tone/2, ontime);
-+ break;
-+
-+ case NSLU2BZ_BEEP_STOP:
-+ del_timer(&n2bz_timer);
-+ break;
-+
-+ case NSLU2BZ_BEEPS:
-+ if (param == 0)
-+ bz_repeatcnt = 0xffffffff;
-+ else
-+ bz_repeatcnt = param;
-+ n2bz_handler(0);
-+ break;
-+
-+ case NSLU2BZ_TONESET:
-+ if (param >= 250 && param <= 2000)
-+ tone = param;
-+ break;
-+
-+ case NSLU2BZ_ONTIME:
-+ if (param > 4 && param < 201)
-+ ontime = param;
-+ break;
-+
-+ case NSLU2BZ_SILENTTIME:
-+ if (param > ontime) //enforce a reasonable duty cycle
-+ offtime = param;
-+ else
-+ offtime = ontime;
-+ break;
-+
-+ case NSLU2BZ_REPEATCNT:
-+ if (param == 0)
-+ bz_repeatcnt = 0xffffffff;
-+ else
-+ bz_repeatcnt = param;
-+ break;
-+
-+ case NSLU2BZ_COMBINED:
-+ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16
-+ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies
-+ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies
-+ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ return 0;
-+}
-+
-+static struct file_operations n2bz_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = n2bz_ioctl,
-+};
-+
-+static void n2iom_initarch(void)
-+{
-+#ifndef CONFIG_LEDS
-+ init_timer(&n2lm_rsg_timer);
-+ init_timer(&n2lm_rsr_timer);
-+ init_timer(&n2lm_d1_timer);
-+ init_timer(&n2lm_d2_timer);
-+
-+ n2lm_rsr_timer.function = n2lm_rsr_handler;
-+ n2lm_rsg_timer.function = n2lm_rsg_handler;
-+ n2lm_d2_timer.function = n2lm_d2_handler;
-+ n2lm_d1_timer.function = n2lm_d1_handler;
-+#endif
-+
-+ init_timer(&n2bz_timer);
-+ n2bz_timer.function = n2bz_handler;
-+
-+ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0;
-+
-+#ifndef CONFIG_LEDS
-+ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3
-+ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds
-+ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc;
-+ n2lm_ledon(LED_ALL);
-+ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT);
-+ n2lm_ledoff(LED_ALL);
-+
-+ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit
-+ n2lm_ledon(LED_RS_RED);
-+#endif
-+
-+ return;
-+}
-+
-+//==================================================================================================
-+
-+static int __init n2iom_init(void)
-+{
-+ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
-+
-+ n2iom_initarch();
-+
-+ n2lm_class = class_create(THIS_MODULE, "nslu2");
-+
-+#ifndef CONFIG_LEDS
-+ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) {
-+ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR);
-+ return -EBUSY;
-+ }
-+ else {
-+ class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
-+ }
-+#endif
-+
-+ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) {
-+ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR);
-+ return -EBUSY;
-+ }
-+ else {
-+ class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
-+ }
-+
-+ return 0;
-+}
-+
-+//==================================================================================================
-+
-+static void __exit n2iom_exit(void)
-+{
-+
-+#ifndef CONFIG_LEDS
-+ del_timer(&n2lm_rsg_timer);
-+ del_timer(&n2lm_rsr_timer);
-+ del_timer(&n2lm_d1_timer);
-+ del_timer(&n2lm_d2_timer);
-+
-+ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" );
-+ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0));
-+#endif
-+
-+ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz");
-+ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0));
-+
-+ class_destroy(n2lm_class);
-+}
-+
-+module_init(n2iom_init);
-+module_exit(n2iom_exit);
-+
-+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>");
-+MODULE_DESCRIPTION("NSLU2 I/O driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
---- linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void)
- * IXP4xx timer tick
- * We use OS timer1 on the CPU for the timer tick and the timestamp
- * counter as a source of real clock ticks to account for missed jiffies.
-+ *
-+ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second,
-+ * this is significantly greater than the actual number on any ixp4xx
-+ * board. Neither this nor 'LATCH' are required by this code because
-+ * the only requirement is to generate HZ timer_tick calls per second.
- *************************************************************************/
-+#if TICK_NSEC * HZ != 1000000000
-+ /* This will cause the jiffies to drift unnecessarily. */
-+# error CLOCK_TICK_RATE should be a multiple of HZ for this code
-+#endif
-+
-+/* These are the control registers for the interrupt handler, they must
-+ * only be read and written by the interrupt handler and by the init
-+ * method (which sets them to 0).
-+ */
-+static volatile u32 last_timer_time;
-+static volatile int accumulated_error;
-+
-+/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset
-+ * this from the board level code if required. The following variables
-+ * must be *written* only by set_board_tick_rate
-+ */
-+static u32 board_tick_rate;
-+static u32 board_tick_per_1000; /* board_tick_rate/1000 */
-+static u32 timer_count;
-+
-+/* The following symbol may be written to change the current tick rate,
-+ * it is read by the interrupt handler and used to reload the timer.
-+ * The 'real' value (the one in use) is 'board_tick_rate' above.
-+ * NOTE: this can be tweaked to match the actual crystal on a particular
-+ * machine.
-+ */
-+volatile u32 ixp4xx_board_tick_rate = 66666600;
-+EXPORT_SYMBOL(ixp4xx_board_tick_rate);
-+
-+/* The set API may run asynchronously in the presence of interrupts,
-+ * everything it does it is both atomic and complete (notice that it
-+ * doesn't change any of the 'volatile' values). The mathematics in
-+ * here require the following values. Changing the board tick rate
-+ * implies an unknown error in the current timestamp tick count.
-+ */
-+#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1
-+# error unexpected value for timer reload mask
-+#endif
-+static void set_board_tick_rate(u32 rate) {
-+ u32 reload;
-+
-+ /* Store the two effectively informational rate values, the
-+ * error calculation is (rate - count*HZ) (above), and rate
-+ * is changed first, this can cause a temporary error which
-+ * will be corrected on the next interrupt.
-+ */
-+ board_tick_rate = rate;
-+ board_tick_per_1000 = (rate+500)/1000;
-+
-+ /* Calculate the correct value to load into the timer countdown
-+ * register, the low two bits must be b01 (to enable the timer).
-+ * Select the top bits to be as close to the desired value as
-+ * possible.
-+ *
-+ * First find the best value, regardless of the low two bits -
-+ * this is the value used in the interrupt calculation even though
-+ * it cannot necessarily be set into the register.
-+ */
-+ timer_count = (rate + (HZ/2))/HZ;
-+
-+ /* Now the timer_ticks are being generated at this rate, calculate
-+ * an appropriate value for the register. This stores a 30 bit
-+ * value which gives a period of 4*x+1, we want:
-+ *
-+ * 4*x+1 = board_tick_rate/HZ
-+ *
-+ * This needs to be rounded to the closest 4*HZ value:
-+ *
-+ * x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ
-+ * x = (board_tick_rate+HZ) / (4*HZ);
-+ */
-+ reload = (board_tick_rate + HZ) / HZ;
-+ reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ *IXP4XX_OSRT1 = reload;
-
--static unsigned volatile last_jiffy_time;
-+ /* If the clock is drifing, look in syslog: */
-+ printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload);
-+}
-
--#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+/* This returns the time in timer ticks since the 'last_timer_time'
-+ * recorded above. Use this to avoid arithmetic errors because of
-+ * the overflow when the timer wraps.
-+ */
-+static inline u32 ixp4xx_timer_delta(void)
-+{
-+ return *IXP4XX_OSTS - last_timer_time;
-+}
-
- /* IRQs are disabled before entering here from do_gettimeofday() */
- static unsigned long ixp4xx_gettimeoffset(void)
- {
-- u32 elapsed;
--
-- elapsed = *IXP4XX_OSTS - last_jiffy_time;
-+ /* Return the offset of the current time from the last time
-+ * timer tick in microseconds. This is only used for the
-+ * gettimeofday call.
-+ *
-+ * The result of this API is at most about 20000 (for a 50Hz
-+ * HZ - 20000 uS/tick), the input delta is at most about
-+ * 1.3M - 21 bits.
-+ */
-+ u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */
-+ /* return delta * 1000000 / board_tick_rate; */
-+ return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000;
-+}
-
-- return elapsed / CLOCK_TICKS_PER_USEC;
-+/* This is the correct adjustment to the counter to compensate for an
-+ * error iff timer_count-1 <= exact_count <= timer_count+1
-+ */
-+static inline int adjustment(int error) {
-+ if (error >= HZ)
-+ return 1;
-+ else if (error <= -HZ)
-+ return -1;
-+ return 0;
- }
-
- static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
-+ u32 rate;
-+ u32 count;
-+ int error;
-+
- write_seqlock(&xtime_lock);
-
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-+ /* If the board tick rate has been changed update the cached
-+ * value.
-+ */
-+ if (ixp4xx_board_tick_rate != board_tick_rate) {
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-+ accumulated_error = 0;
-+ }
-+
- /*
- * Catch up with the real idea of time
-+ *
-+ * board_tick_rate: actual ixp4xx ticks/second, read-only
-+ * accumulated_error: aggregate error/tick * HZ, read/write
-+ * timer_count: best ixp4xx ticks per timer_tick, read-only
- */
-- while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
-+ rate = board_tick_rate;
-+ error = accumulated_error;
-+ count = timer_count;
-+ do {
-+ u32 adjusted_count = count + adjustment(error);
-+ if (ixp4xx_timer_delta() < adjusted_count)
-+ break;
- timer_tick(regs);
-- last_jiffy_time += LATCH;
-- }
-+ last_timer_time += adjusted_count;
-+ error += rate - adjusted_count*HZ;
-+ } while (1);
-+ accumulated_error = error;
-
- write_sequnlock(&xtime_lock);
-
-@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq
- .handler = ixp4xx_timer_interrupt,
- };
-
-+u32 ixp4xx_get_board_tick_rate(void) {
-+ return board_tick_rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_get_board_tick_rate);
-+
-+void ixp4xx_set_board_tick_rate(u32 rate) {
-+ ixp4xx_board_tick_rate = rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_set_board_tick_rate);
-+
- static void __init ixp4xx_timer_init(void)
- {
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
- /* Setup the Timer counter value */
-- *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-
- /* Reset time-stamp counter */
- *IXP4XX_OSTS = 0;
-- last_jiffy_time = 0;
-+ last_timer_time = 0;
-+ accumulated_error = 0;
-
- /* Connect the interrupt handler and enable the interrupt */
- setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
-@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void)
- ARRAY_SIZE(ixp46x_devices));
- }
- }
--
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-@@ -119,6 +119,11 @@ static void nslu2_power_off(void)
-
- static void __init nslu2_init(void)
- {
-+ /* The NSLU2 has a 33MHz crystal on board - 1.01% different
-+ * from the typical value.
-+ */
-+ ixp4xx_set_board_tick_rate(66000000);
-+
- ixp4xx_sys_init();
-
- pm_power_off = nslu2_power_off;
---- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input
- }
-
- if (value > 20 && value < 32767)
-- count = (NSLU2_FREQ / (value*4)) - 1;
-+ count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1;
-
- spin_lock_irqsave(&beep_lock, flags);
-
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-@@ -38,11 +38,6 @@
- #define NSLU2_PCI_INTD_PIN 8
-
-
--/* NSLU2 Timer */
--#define NSLU2_FREQ 66000000
--#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
--#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
--
- /* GPIO */
-
- #define NSLU2_GPIO0 0
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-@@ -6,10 +6,23 @@
- #include <asm/hardware.h>
-
- /*
-- * We use IXP425 General purpose timer for our timer needs, it runs at
-- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
-- * timer register ignores the bottom 2 bits of the LATCH value.
-+ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and
-+ * is the number of internal counts per timer interrupt. Thus
-+ * CLOCK_TICK_RATE is LATCH*HZ.
-+ *
-+ * The actual values of these numbers do not matter, because they
-+ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed
-+ * point number), so the value here gives a LATCH of 1 and pretty
-+ * much guarantees to flush out any off-by-one errors.
-+ *
-+ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of
-+ * HZ, this is checked in the ixp4xx/common.c code.
- */
--#define FREQ 66666666
--#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define CLOCK_TICK_RATE HZ
-
-+/* The following allow the exact board tick rate to be set and
-+ * discovered. The value should be exactly twice the frequency
-+ * (in Hz) of the onboard crystal.
-+ */
-+extern u32 ixp4xx_get_board_tick_rate(void);
-+extern void ixp4xx_set_board_tick_rate(u32 new_rate);
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Nov 14 10:44:43 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
-CONFIG_MACH_NSLU2=y
-# CONFIG_ARCH_AVILA is not set
-# CONFIG_ARCH_ADI_COYOTE is not set
-# CONFIG_ARCH_IXDP425 is not set
-# CONFIG_MACH_IXDPG425 is not set
-# CONFIG_MACH_IXDP465 is not set
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_MACH_GTWX5715 is not set
-
-#
-# IXP4xx Options
-#
-CONFIG_IXP4XX_INDIRECT_PCI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc rtc-x1205.hctosys=1 rtc-x1205.probe=0,0x6f noirqdebug console=ttyS0,115200n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-# CONFIG_IP_NF_MATCH_STRING is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=10240
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MACLIST=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_NSLU2_BEEPER=m
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-CONFIG_VIDEO_BT848=m
-# CONFIG_VIDEO_SAA6588 is not set
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_SAA7134=m
-# CONFIG_VIDEO_SAA7134_ALSA is not set
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-# CONFIG_VIDEO_AUDIO_DECODER is not set
-# CONFIG_VIDEO_DECODER is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_VIDEOBUF=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_CLASS=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-CONFIG_RTC_DRV_X1205=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_NATIVE_ENDIAN is not set
-CONFIG_JFFS2_BIG_ENDIAN=y
-# CONFIG_JFFS2_LITTLE_ENDIAN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
-diff -ur linux-2.6.12.2/drivers/scsi/sd.c linux-2.6.12.2_scsi-idle/drivers/scsi/sd.c
---- linux-2.6.12.2/drivers/scsi/sd.c 2005-08-27 06:12:31.000000000 +0200
-+++ linux-2.6.12.2_scsi-idle/drivers/scsi/sd.c 2005-08-27 06:26:50.000000000 +0200
-@@ -266,6 +266,9 @@
- "count=%d\n", disk->disk_name,
- (unsigned long long)block, this_count));
-
-+ /* Update idle-since time */
-+ sdp->idle = jiffies;
-+
- if (!sdp || !scsi_device_online(sdp) ||
- block + rq->nr_sectors > get_capacity(disk)) {
- SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
-@@ -600,6 +603,8 @@
- case SCSI_IOCTL_GET_IDLUN:
- case SCSI_IOCTL_GET_BUS_NUMBER:
- return scsi_ioctl(sdp, cmd, p);
-+ case SCSI_IOCTL_IDLE:
-+ return (jiffies - sdp->idle) / HZ + 1;
- default:
- error = scsi_cmd_ioctl(filp, disk, cmd, p);
- if (error != -ENOTTY)
-diff -ur linux-2.6.12.2/include/scsi/scsi_device.h linux-2.6.12.2_scsi-idle/include/scsi/scsi_device.h
---- linux-2.6.12.2/include/scsi/scsi_device.h 2005-08-27 06:12:44.000000000 +0200
-+++ linux-2.6.12.2_scsi-idle/include/scsi/scsi_device.h 2005-08-27 06:27:09.000000000 +0200
-@@ -125,6 +125,7 @@
- atomic_t ioerr_cnt;
-
- int timeout;
-+ unsigned long idle; /* scsi idle time in jiffers */
-
- struct device sdev_gendev;
- struct class_device sdev_classdev;
-diff -ur linux-2.6.12.2/include/scsi/scsi_ioctl.h linux-2.6.12.2_scsi-idle/include/scsi/scsi_ioctl.h
---- linux-2.6.12.2/include/scsi/scsi_ioctl.h 2005-08-27 06:12:44.000000000 +0200
-+++ linux-2.6.12.2_scsi-idle/include/scsi/scsi_ioctl.h 2005-08-28 17:32:17.000000000 +0200
-@@ -7,6 +7,7 @@
- #define SCSI_IOCTL_SYNC 4 /* Request synchronous parameters */
- #define SCSI_IOCTL_START_UNIT 5
- #define SCSI_IOCTL_STOP_UNIT 6
-+#define SCSI_IOCTL_IDLE 4746 /* get idle time in jiffies */
- /* The door lock/unlock constants are compatible with Sun constants for
- the cdrom */
- #define SCSI_IOCTL_DOORLOCK 0x5380 /* lock the eject mechanism */
+++ /dev/null
---- linux-2.6.15/include/net/maclist.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/net/maclist.h 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,23 @@
-+#ifndef _MACLIST_H
-+#define _MACLIST_H 1
-+/*
-+ * Interfaces to the MAC repository
-+ */
-+/*
-+ * Add a single entry, returns 0 on success else an error
-+ * code. Must *not* be called from an interrupt handler.
-+ */
-+extern int maclist_add(const u8 id_to_add[6]);
-+
-+/*
-+ * Return the current entry count (valid in any context).
-+ */
-+extern int maclist_count(void);
-+
-+/*
-+ * Return the ID from the n'th entry (valid in any context),
-+ * returns 0 on success, -EINVAL if 'n' is out of range.
-+ */
-+extern int maclist_read(u8 (*buffer_for_id)[6], int index_of_id_to_return);
-+
-+#endif /*_MACLIST_H*/
---- linux-2.6.15/drivers/net/maclist.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/maclist.c 1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,314 @@
-+/*
-+ * drivers/net/maclist.c
-+ *
-+ * a simple driver to remember ethernet MAC values
-+ *
-+ * Some Ethernet hardware implementations have no built-in
-+ * storage for allocated MAC values - an example is the Intel
-+ * IXP420 chip which has support for Ethernet but no defined
-+ * way of storing allocated MAC values. With such hardware
-+ * different board level implementations store the allocated
-+ * MAC (or MACs) in different ways. Rather than put board
-+ * level code into a specific Ethernet driver this driver
-+ * provides a generally accessible repository for the MACs
-+ * which can be written by board level code and read by the
-+ * driver.
-+ *
-+ * The implementation also allows user level programs to
-+ * access the MAC information in /proc/net/maclist. This is
-+ * useful as it allows user space code to use the MAC if it
-+ * is not used by a built-in driver.
-+ *
-+ * Copyright (C) 2005 John Bowler
-+ * Author: John Bowler <jbowler@acm.org>
-+ * Maintainers: http://www.nslu2-linux.org/
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * External interfaces:
-+ * Interfaces to linux kernel (and modules)
-+ * maclist_add: add a single MAC
-+ * maclist_count: total number of MACs stored
-+ * maclist_read: read a MAC 0..(maclist_count-1)
-+ */
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/etherdevice.h>
-+#include <linux/proc_fs.h>
-+#include <linux/errno.h>
-+
-+#include <net/maclist.h>
-+
-+#define MACLIST_NAME "maclist"
-+
-+MODULE_AUTHOR("John Bowler <jbowler@acm.org>");
-+MODULE_DESCRIPTION("MAC list repository");
-+MODULE_LICENSE("GPL");
-+
-+typedef struct maclist_entry {
-+ struct maclist_entry *next; /* Linked list, first first */
-+ u8 id[6]; /* 6 byte Ethernet MAC */
-+} maclist_entry_t;
-+
-+/* Access to this list is possible at any time - entries in
-+ * the list are never destroyed. Modification of the list is
-+ * safe only from the init code (i.e. modification must be
-+ * single threaded), but read from an interrupt at the same
-+ * time is possible and safe.
-+ */
-+static maclist_entry_t *maclist_list = 0;
-+
-+/*
-+ * External interfaces.
-+ *
-+ * Add a single entry, returns 0 on success else an error
-+ * code. Must be single threaded.
-+ */
-+int maclist_add(const u8 new_id[6]) {
-+ maclist_entry_t *new_entry, **tail;
-+
-+ if (new_id == 0 || !is_valid_ether_addr(new_id)) {
-+ printk(KERN_ERR MACLIST_NAME ": invalid ethernet address\n");
-+ return -EINVAL;
-+ }
-+ new_entry = kmalloc(sizeof *new_entry, GFP_KERNEL);
-+ if (new_entry == 0)
-+ return -ENOMEM;
-+ new_entry->next = 0;
-+ memcpy(new_entry->id, new_id, sizeof new_entry->id);
-+
-+ tail = &maclist_list;
-+ while (*tail != 0)
-+ tail = &(*tail)->next;
-+ *tail = new_entry;
-+ return 0;
-+}
-+EXPORT_SYMBOL(maclist_add);
-+
-+/*
-+ * Return the current entry count (valid in any context).
-+ */
-+int maclist_count(void) {
-+ maclist_entry_t *tail = maclist_list;
-+ int count = 0;
-+
-+ while (tail != 0) {
-+ tail = tail->next;
-+ ++count;
-+ }
-+
-+ return count;
-+}
-+EXPORT_SYMBOL(maclist_count);
-+
-+/*
-+ * Return the ID from the n'th entry (valid in any context),
-+ * returns 0 on success, -EINVAL if 'n' is out of range.
-+ */
-+int maclist_read(u8 (*id)[6], int n) {
-+ maclist_entry_t *entry = maclist_list;
-+
-+ while (n > 0 && entry != 0) {
-+ --n;
-+ entry = entry->next;
-+ }
-+
-+ if (n == 0 && entry != 0) {
-+ memcpy(id, entry->id, sizeof *id);
-+ return 0;
-+ }
-+
-+ printk(KERN_ERR MACLIST_NAME ": id does not exist\n");
-+ return -EINVAL;
-+}
-+EXPORT_SYMBOL(maclist_read);
-+
-+/*
-+ * Parameter parsing. The option string is a list of MAC
-+ * addresses, comma separated. (The parsing really should
-+ * be somewhere central...)
-+ */
-+static int __init maclist_setup(char *param) {
-+ int bytes = 0, seen_a_digit = 0;
-+ u8 id[6];
-+
-+ memset(id, 0, sizeof id);
-+
-+ if (param) do {
-+ int digit = -1;
-+ switch (*param) {
-+ case '0': digit = 0; break;
-+ case '1': digit = 1; break;
-+ case '2': digit = 2; break;
-+ case '3': digit = 3; break;
-+ case '4': digit = 4; break;
-+ case '5': digit = 5; break;
-+ case '6': digit = 6; break;
-+ case '7': digit = 7; break;
-+ case '8': digit = 8; break;
-+ case '9': digit = 9; break;
-+ case 'a': case 'A': digit = 10; break;
-+ case 'b': case 'B': digit = 11; break;
-+ case 'c': case 'C': digit = 12; break;
-+ case 'd': case 'D': digit = 13; break;
-+ case 'e': case 'E': digit = 14; break;
-+ case 'f': case 'F': digit = 15; break;
-+ case ':':
-+ if (seen_a_digit)
-+ bytes = (bytes+1) & ~1;
-+ else
-+ bytes += 2; /* i.e. ff::ff is ff:00:ff */
-+ seen_a_digit = 0;
-+ break;
-+ case 0:
-+ if (bytes == 0) /* nothing new seen so far */
-+ return 0;
-+ /*fall through*/
-+ case ',': case ';':
-+ if (bytes > 0)
-+ bytes = 12; /* i.e. all trailing bytes 0 */
-+ break;
-+ default:
-+ printk(KERN_ERR MACLIST_NAME ": invalid character <%c[%d]>\n",
-+ *param, *param);
-+ return -EINVAL;
-+ }
-+
-+ if (digit >= 0) {
-+ id[bytes>>1] = (id[bytes>>1] << 4) + digit; break;
-+ ++bytes;
-+ seen_a_digit = 1;
-+ }
-+
-+ if (bytes >= 12) {
-+ int rc = maclist_add(id);
-+ if (rc)
-+ return rc;
-+ bytes = 0;
-+ seen_a_digit = 0;
-+ memset(id, 0, sizeof id);
-+ if (*param == 0)
-+ return 0;
-+ }
-+ ++param;
-+ } while (1);
-+
-+ return 0;
-+}
-+
-+/*
-+ * procfs support, if compiled in.
-+ */
-+#ifdef CONFIG_PROC_FS
-+/*
-+ * Character device read
-+ */
-+static int maclist_getchar(off_t n) {
-+ static char xdigit[16] = "0123456789abcdef";
-+ maclist_entry_t *head = maclist_list;
-+ int b;
-+
-+ do {
-+ if (head == 0)
-+ return -1;
-+ if (n < 18)
-+ break;
-+ head = head->next;
-+ n -= 18;
-+ } while (1);
-+
-+ if (n == 17)
-+ return '\n';
-+
-+ b = n/3;
-+ switch (n - b*3) {
-+ case 0: return xdigit[head->id[b] >> 4];
-+ case 1: return xdigit[head->id[b] & 0xf];
-+ default: return ':';
-+ }
-+}
-+
-+/*
-+ * The extensively undocumented proc_read_t callback is implemented here.
-+ * Go look in fs/proc/generic.c:
-+ *
-+ * Prototype:
-+ * int f(char *buffer, char **start, off_t offset,
-+ * int count, int *peof, void *dat)
-+ *
-+ * Assume that the buffer is "count" bytes in size.
-+ *
-+ * 2) Set *start = an address within the buffer.
-+ * Put the data of the requested offset at *start.
-+ * Return the number of bytes of data placed there.
-+ * If this number is greater than zero and you
-+ * didn't signal eof and the reader is prepared to
-+ * take more data you will be called again with the
-+ * requested offset advanced by the number of bytes
-+ * absorbed.
-+ */
-+static int maclist_proc_read(char *buffer, char **start, off_t offset,
-+ int count, int *peof, void *dat) {
-+ int total;
-+
-+ *start = buffer;
-+ total = 0;
-+
-+ while (total < count) {
-+ int ch = maclist_getchar(offset++);
-+ if (ch == -1) {
-+ *peof = 1;
-+ break;
-+ }
-+ *buffer++ = ch;
-+ ++total;
-+ }
-+
-+ return total;
-+}
-+#endif
-+
-+/*
-+ * Finally, the init/exit functions.
-+ */
-+static void __exit maclist_exit(void)
-+{
-+ maclist_entry_t *list;
-+
-+ remove_proc_entry(MACLIST_NAME, proc_net);
-+
-+ list = maclist_list;
-+ maclist_list = 0;
-+
-+ while (list != 0) {
-+ maclist_entry_t *head = list;
-+ list = head->next;
-+ kfree(head);
-+ }
-+}
-+
-+#ifdef MODULE
-+static char ids[256];
-+module_param_string(ids, ids, sizeof ids, 0);
-+MODULE_PARM_DESC(ids, "comma separated list of MAC ids\n");
-+#else
-+__setup("maclist_ids=", maclist_setup);
-+#endif
-+
-+static int __init maclist_init(void)
-+{
-+# ifdef MODULE
-+ if (ids[0])
-+ maclist_setup(ids);
-+# endif
-+
-+ /* Ignore failure, the module will still work. */
-+ (void)create_proc_read_entry(MACLIST_NAME, S_IRUGO, proc_net, maclist_proc_read, NULL);
-+
-+ return 0;
-+}
-+
-+module_init(maclist_init);
-+module_exit(maclist_exit);
---- linux-2.6.15/drivers/net/Makefile 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/Makefile 1970-01-01 00:00:00.000000000 +0000
-@@ -70,6 +70,7 @@ obj-$(CONFIG_RIONET) += rionet.o
- # end link order section
- #
-
-+obj-$(CONFIG_MACLIST) += maclist.o
- obj-$(CONFIG_MII) += mii.o
- obj-$(CONFIG_PHYLIB) += phy/
-
---- linux-2.6.15/drivers/net/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -166,6 +166,21 @@ config NET_ETHERNET
- kernel: saying N will just cause the configurator to skip all
- the questions about Ethernet network cards. If unsure, say N.
-
-+config MACLIST
-+ tristate "Ethernet MAC repository"
-+ depends on NET_ETHERNET
-+ help
-+ Some ethernet controllers have no built-in way of obtaining an
-+ appropriate Ethernet MAC address. Such controllers have to be
-+ initialised in a board-specific way, depending on how the allocated
-+ MAC is stored. The MAC repository provides a set of APIs and a
-+ proc entry (/proc/net/maclist) to store MAC values from the board
-+ so that such drivers can obtain a MAC address without board-specific
-+ code. You do not need to enable this device - it will be selected
-+ automatically by any device which requires it. It is only useful
-+ to enable it manually when building a device driver independently
-+ of the kernel build.
-+
- config MII
- tristate "Generic Media Independent Interface device support"
- depends on NET_ETHERNET
+++ /dev/null
---- linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
-@@ -11,8 +11,8 @@ comment "IXP4xx Platforms"
- # This entry is placed on top because otherwise it would have
- # been shown as a submenu.
- config MACH_NSLU2
-- bool
-- prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
-+ bool "NSLU2"
-+ select MACLIST
- help
- Say 'Y' here if you want your kernel to support Linksys's
- NSLU2 NAS device. For more information on this platform,
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-@@ -16,11 +16,14 @@
- #include <linux/kernel.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-+#include <linux/mtd/mtd.h>
-
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-
-+#include <net/maclist.h>
-+
- static struct flash_platform_data nslu2_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-@@ -112,6 +115,37 @@ static void nslu2_power_off(void)
- gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
- }
-
-+/*
-+ * When the RedBoot partition is added the MAC address is read from
-+ * it.
-+ */
-+void flash_add(struct mtd_info *mtd) {
-+ if (strcmp(mtd->name, "RedBoot") == 0) {
-+ size_t retlen;
-+ u_char mac[6];
-+
-+ /* The MAC is at a known offset... */
-+ if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) {
-+ printk(KERN_INFO "NSLU2 MAC: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+ maclist_add(mac);
-+ } else {
-+ printk(KERN_ERR "NSLU2 MAC: read failed\n");
-+ }
-+ }
-+}
-+
-+/*
-+ * Nothing to do on remove at present.
-+ */
-+void flash_remove(struct mtd_info *mtd) {
-+}
-+
-+struct mtd_notifier flash_notifier = {
-+ .add = flash_add,
-+ .remove = flash_remove,
-+};
-+
- static void __init nslu2_init(void)
- {
- /* The NSLU2 has a 33MHz crystal on board - 1.01% different
-@@ -119,6 +153,11 @@ static void __init nslu2_init(void)
- */
- ixp4xx_set_board_tick_rate(66000000);
-
-+ /* The flash has an ethernet MAC embedded in it which we need,
-+ * that is all this notifier does.
-+ */
-+ register_mtd_user(&flash_notifier);
-+
- ixp4xx_sys_init();
-
- pm_power_off = nslu2_power_off;
+++ /dev/null
---- linux-2.6.11/arch/arm/Makefile.orig 2005-03-20 15:02:07.587138712 -0800
-+++ linux-2.6.11/arch/arm/Makefile 2005-03-20 15:10:36.546765088 -0800
-@@ -33,6 +33,12 @@
- AFLAGS += -mlittle-endian
- endif
-
-+ifeq ($(CONFIG_ARM_THUMB_INTERWORK),y)
-+CFLAGS += -mthumb-interwork
-+else
-+CFLAGS += -mno-thumb-interwork
-+endif
-+
- comma = ,
-
- # This selects which instruction set is used.
-@@ -43,6 +49,8 @@
- arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
- arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
- arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
-+# The following overrides the CPU_32v5 setting if specified
-+arch-$(CONFIG_ARCH_XSCALE) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=xscale,-march=armv5te)
-
- # This selects how we optimise for the processor.
- tune-$(CONFIG_CPU_ARM610) :=-mtune=arm610
---- linux-2.6.11/arch/arm/mm/Kconfig.orig 2005-03-20 14:54:07.927058128 -0800
-+++ linux-2.6.11/arch/arm/mm/Kconfig 2005-03-20 15:01:26.727350344 -0800
-@@ -366,6 +366,31 @@
-
- If you don't know what this all is, saying Y is a safe choice.
-
-+config ARM_THUMB_INTERWORK
-+ bool "Support Thumb code within the kernel"
-+ depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_V6
-+ default n
-+ help
-+ Say Y to compile the whole kernel with support for the interworking
-+ of the 16 bit thumb instruction set and 32 bit ARM instruction set.
-+
-+ You only need this if some parts of the kernel will be compiled
-+ as thumb code, this is not usual. It increases the total kernel
-+ size by about 3%.
-+
-+config ARCH_XSCALE
-+ bool "Use -march=xscale in preference to -march=armv5te"
-+ depends on CPU_XSCALE
-+ default y
-+ help
-+ Say yes to ask gcc to use the xscale architecture (instruction set)
-+ in preference to armv5te. This allows gcc to use the extra xscale
-+ instructions but means the code will not run on a standard (non-xscale)
-+ armv5te. At present this makes no difference - gcc 3.4.3 does not
-+ generate any xscale specific instructions - however gcc 3.4.3 does
-+ generate slightly more optimal instructions if this is specified (this
-+ is an error inside gcc 3.4.3 which should be fixed in 4.1.)
-+
- config CPU_BIG_ENDIAN
- bool "Build big-endian kernel"
- depends on ARCH_SUPPORTS_BIG_ENDIAN
+++ /dev/null
---- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-03-01 23:37:49.000000000 -0800
-+++ linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-06-17 17:51:32.569981939 -0700
-@@ -52,7 +52,7 @@
- * Expansion BUS Configuration registers
- */
- #define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000)
--#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000)
-+#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000)
- #define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000)
-
- /*
+++ /dev/null
---- nslu2-io.c.old 2da1d3f5c0aa0804c5769588337077ddcb35c5e9
-+++ linux-2.6.12.2/arch/arm/mach-ixp4xx/nslu2-io.c e895da638b4aae16a11fafe52ae0b063645a9a12
-@@ -158,6 +158,8 @@
- #define LED_DISK2 3
- #define LED_ALL 4
-
-+static int nslu2_shutdown_in_progress = 0;
-+
- static unsigned long init_jiffy = 0; //jiffies at init time
- static unsigned long rb_presses = 0; //number of reset button presses
- static unsigned long ontime = 50;
-@@ -503,40 +505,20 @@
- static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs)
- {
- void *ret;
--
-- wake_up(&n2pb_waitq);
-- remove_proc_entry(PWR_OFF_STR, NULL); //no parent
-- n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED);
-- ret = create_proc_entry(PWR_OFF_STR, 0, NULL);
-- nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret));
--
--// WARNING: This is RUDE...it unconditionally pulls the power plug.
--// Your data will be at risk...since this is just a test system
--// I am leaving it enabled...eventually userland needs to get the
--// message, do an orderly shutdown and use an ioctl or something in
--// /proc/powerdowm to actually have us pull the plug.
--
-- machine_power_off();
--
-+ if (!nslu2_shutdown_in_progress++) {
-+ wake_up(&n2pb_waitq);
-+ remove_proc_entry(PWR_OFF_STR, NULL); //no parent
-+ n2_buzz(N2_BEEP_PITCH_HIGH, N2_BEEP_DUR_SHORT); // Short, high-pitched "OK"
-+ ret = create_proc_entry(PWR_OFF_STR, 0, NULL);
-+ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed. Shutting down. cpe ret = %p\n", ret));
-+ kill_proc(1,SIGINT,1); // Signal init to shut down
-+ } else {
-+ n2_buzz(N2_BEEP_PITCH_LOW, N2_BEEP_DUR_MED); // Make a scary noise!
-+ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed while already in shutdown")); // Whine!
-+ }
- return IRQ_HANDLED;
- }
-
--//==================================================================================================
--//
--//static void do_rb_timeout(unsigned long data)
--//{
--// int i;
--//
--// for (i = 0; i < rb_presses; i++)
--// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT);
--// return;
--//}
--//
--//==================================================================================================
--// does nothing -- waiting for userland to define
--// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so
--// we hang in a loop until the button is no longer pressed
--
- struct testr {
- int ctl;
- long param;
-@@ -544,72 +526,11 @@
-
- static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs)
- {
-+// This doesn't reset the NSLU2. It powers it off. Close enough, since reset is unreliable
-
-- static struct testr test[] = {
-- { N2LM_ALL_OFF,0 },
-- { N2LM_ON,0 },
-- { N2LM_OFF,0 },
-- { N2LM_ON,1 },
-- { N2LM_ALL_OFF,1 },
-- { N2LM_ON,2 },
-- { N2LM_OFF,2 },
-- { N2LM_ON,3 },
-- { N2LM_OFF,3 },
-- { N2LM_BLINK,0 },
-- { N2LM_OFF,0 },
-- { N2LM_BLINK,1 },
-- { N2LM_OFF,1 },
-- { N2LM_BLINK,2 },
-- { N2LM_OFF,2 },
-- { N2LM_BLINK,3 },
-- { N2LM_OFF,3 },
-- { N2LM_ALL_OFF,0 },
-- { N2LM_ALT,1 },
-- { N2LM_OFF,1 },
-- { N2LM_ALL_ON,0 }
-- };
--
-- nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long)));
--
- wake_up(&n2rb_waitq);
-- while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0)
-- ; //wait for button release
--
-- if (rb_presses > 20)
-- rb_presses = 0;
-- tone = (rb_presses * 50) + 200;
-- ontime = (rb_presses*10) + 100;
-- offtime = 500 - (rb_presses*20);
-- nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone));
-- rb_presses++;
--
-- n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses);
-- n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param);
--// if (rb_presses == 0) {
--// init_jiffy = jiffies;
--// init_timer (&n2rb_timer);
--// n2rb_timer.function = do_rb_timeout;
--// };
--//
--// if (rb_presses == 8)
--// rb_presses = 0;
--// if (rb_presses & 1)
--// n2lm_ledon(test[rb_presses]);
--// else
--// n2lm_ledoff(test[rb_presses]);
--//
--// n2rb_timer.expires = (jiffies + RB_DELAY);
--// add_timer (&n2rb_timer);
--// if (rb_presses < 5) {
--// if (rb_presses > 0)
--// n2lm_ledoff(rb_presses);
--// n2lm_ledon(++rb_presses);
--// n2lm_timer_start(rb_presses);
--// };
--
-- nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies));
-- return IRQ_HANDLED;
--
-+ machine_power_off();
-+ return IRQ_HANDLED; // So we don't get a nobody cared error :-P
- }
-
- //==================================================================================================
+++ /dev/null
-# This patch changes the thumb swi handling for any thumb swi with
-# an immediate value != 0, those swis are mapped into the arm
-# specific swis. This implements a thumb breakpoint swi.
---- linux-2.6.12.2/arch/arm/kernel/entry-common.S.orig 2005-09-19 12:48:42.323365573 -0700
-+++ linux-2.6.12.2/arch/arm/kernel/entry-common.S 2005-09-19 13:31:19.004247358 -0700
-@@ -137,8 +137,11 @@
- */
- #ifdef CONFIG_ARM_THUMB
- tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs
-- addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
-- ldreq scno, [lr, #-4]
-+ ldrneh ip, [lr, #-2] @ thumb swi instruction
-+ ldreq scno, [lr, #-4] @ arm swi instruction
-+ addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in to thumb r7 value
-+ bicnes ip, ip, #0xff00 @ clear thumb swi bits
-+ addne scno, ip, #__ARM_NR_BASE @ thumb swi0->r7, swi!0->arm swi
- #else
- ldr scno, [lr, #-4] @ get SWI instruction
- #endif
+++ /dev/null
-# Fix for the NSLU2 timer problem (tickadj 10101.01 when it should be 10000)
-# Also contains a fix for the more generate problem on the ixp4xx in that the
-# Intel spec says to use a 33.33MHz crystal, not 33.333333Mhz
-
---- linux-2.6.12.2/include/asm-arm/arch-ixp4xx/timex.h.orig 2005-08-05 11:02:09.872690723 -0700
-+++ linux-2.6.12.2/include/asm-arm/arch-ixp4xx/timex.h 2005-08-05 11:45:08.786971567 -0700
-@@ -7,7 +7,14 @@
-
- /*
- * We use IXP425 General purpose timer for our timer needs, it runs at
-- * 66.66... MHz
-+ * 66.66 MHz (exactly) by the Intel specification.
- */
--#define CLOCK_TICK_RATE (66666666)
--
-+#if 0
-+#define CLOCK_TICK_RATE (66660000)
-+#else
-+/*
-+ * Unfortunately the NSLU2 has a 33MHz crystal, so the rate is not the
-+ * specified one.
-+ */
-+#define CLOCK_TICK_RATE (66000000)
-+#endif
+++ /dev/null
---- linux-2.6.11/.pc/2.6.patch/drivers/i2c/chips/Kconfig 2005-06-17 17:51:28.635578329 -0700
-+++ linux-2.6.11/drivers/i2c/chips/Kconfig 2005-06-17 17:51:32.565982545 -0700
-@@ -430,6 +430,15 @@
-
- This driver can also be built as a module. If so, the module
- will be called isp1301_omap.
-+config SENSORS_X1205
-+ tristate "Xicor X1205 RTC chip"
-+ depends on I2C && EXPERIMENTAL
-+ select I2C_SENSOR
-+ help
-+ If you say yes here you get support for the Xicor x1205 RTC chip.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called x1205-rtc
-
- config SENSORS_M41T00
- tristate "ST M41T00 RTC chip"
---- linux-2.6.11/.pc/2.6.patch/drivers/i2c/chips/Makefile 2005-06-17 17:51:28.636578177 -0700
-+++ linux-2.6.11/drivers/i2c/chips/Makefile 2005-06-17 17:51:32.566982394 -0700
-@@ -41,6 +41,7 @@
- obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
- obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
- obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
-+obj-$(CONFIG_SENSORS_X1205) += x1205-rtc.o
-
- ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
- EXTRA_CFLAGS += -DDEBUG
---- linux-2.6.11/.pc/2.6.patch/include/linux/i2c-id.h 2005-06-17 17:51:31.358165630 -0700
-+++ linux-2.6.11/include/linux/i2c-id.h 2005-06-17 17:51:32.569981939 -0700
-@@ -108,6 +108,7 @@
- #define I2C_DRIVERID_TDA7313 62 /* TDA7313 audio processor */
- #define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */
- #define I2C_DRIVERID_SAA7114H 64 /* video decoder */
-+#define I2C_DRIVERID_X1205 0xF0
-
-
- #define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */
+++ /dev/null
---- linux-2.6.11.2/scripts/mkcompile_h.orig 2005-05-07 05:27:02.440000000 +0000
-+++ linux-2.6.11.2/scripts/mkcompile_h 2005-05-07 05:28:30.360000000 +0000
-@@ -43,16 +43,9 @@
- echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\"
-
- echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C LANG=C date +%T`\"
-- echo \#define LINUX_COMPILE_BY \"`whoami`\"
-- echo \#define LINUX_COMPILE_HOST \"`hostname | $UTS_TRUNCATE`\"
--
-- if [ -x /bin/dnsdomainname ]; then
-- echo \#define LINUX_COMPILE_DOMAIN \"`dnsdomainname | $UTS_TRUNCATE`\"
-- elif [ -x /bin/domainname ]; then
-- echo \#define LINUX_COMPILE_DOMAIN \"`domainname | $UTS_TRUNCATE`\"
-- else
-- echo \#define LINUX_COMPILE_DOMAIN
-- fi
-+ echo \#define LINUX_COMPILE_BY \"openslug\"
-+ echo \#define LINUX_COMPILE_HOST \"openslug.org\"
-+ echo \#define LINUX_COMPILE_DOMAIN \"openslug.org\"
-
- echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | tail -n 1`\"
- ) > .tmpcompile
+++ /dev/null
-# Kernel for NSLU2
-#
-# Increment PR_CONFIG for changes to the nslu2-kernel specific
-# defconfig (do *NOT* increment anything in here for changes
-# to other kernel configs!)
-PR_CONFIG = "0"
-#
-# Increment the number below (i.e. the digits after PR) when
-# making changes within this file or for changes to the patches
-# applied to the kernel.
-PR = "r1.${PR_CONFIG}"
-
-require nslu2-kernel.inc
-
-# N2K_PATCHES - full list of patches to apply
-N2K_PATCHES = "\
- file://00-memory-h-page-shift.patch;patch=1 \
- file://90-ixp4xx-pci-le.patch;patch=1 \
- file://18-ixp4xx-io-h-addr.patch;patch=1 \
- file://19-jffs2-force-be.patch;patch=1 \
- file://20-timer.patch;patch=1 \
- file://29-ipv4-route-c-spinlock.patch;patch=1 \
- file://30-i2c-x1205-mm1.patch;patch=1 \
- file://50-nslu2-arch.patch;patch=1 \
- file://55-nslu2-rtc.patch;patch=1 \
- file://60-nslu2-beeper.patch;patch=1 \
- file://70-nslu2-io.patch;patch=1 \
- file://75-nslu2-leds.patch;patch=1 \
- file://80-nslu2-class-device-create.patch;patch=1 \
- file://90-pegasus.patch;patch=1 \
- file://anonymiser.patch;patch=1 \
-"
-
-# These options get added to the kernel command line, only put things
-# specific to the bootstrap of *this* kernel in here - DISTRO specfic
-# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
-# in nslu2-kernel.inc)
-CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1"
+++ /dev/null
-# Kernel for NSLU2
-#
-# Increment PR_CONFIG for changes to the nslu2-kernel specific
-# defconfig (do *NOT* increment anything in here for changes
-# to other kernel configs!)
-PR_CONFIG = "0"
-#
-# Increment the number below (i.e. the digits after PR) when
-# making changes within this file or for changes to the patches
-# applied to the kernel.
-PR = "r0.${PR_CONFIG}"
-
-require nslu2-kernel.inc
-
-# N2K_PATCHES - full list of patches to apply
-N2K_PATCHES = "\
- file://90-ixp4xx-pci-le.patch;patch=1 \
- file://10-ixp4xx-copy-from.patch;patch=1 \
- file://10-ixp4xx-le.patch;patch=1 \
- file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \
- file://15-ixp4xx-writesb-l-w.patch;patch=1 \
- file://18-ixp4xx-io-h-addr.patch;patch=1 \
- file://19-jffs2-force-be.patch;patch=1 \
- file://29-ipv4-route-c-spinlock.patch;patch=1 \
- file://30-i2c-x1205.patch;patch=1 \
- file://50-nslu2-arch.patch;patch=1 \
- file://55-nslu2-rtc.patch;patch=1 \
- file://60-nslu2-beeper.patch;patch=1 \
- file://70-nslu2-io.patch;patch=1 \
- file://75-nslu2-leds.patch;patch=1 \
- file://90-pegasus.patch;patch=1 \
- file://20-timer.patch;patch=1 \
- file://91-maclist.patch;patch=1 \
- file://92-nslu2-maclist.patch;patch=1 \
- file://anonymiser.patch;patch=1 \
-"
-
-# These options get added to the kernel command line, only put things
-# specific to the bootstrap of *this* kernel in here - DISTRO specfic
-# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
-# in nslu2-kernel.inc)
-CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1"
+++ /dev/null
-# Kernel for NSLU2
-#
-# Increment PR_CONFIG for changes to the nslu2-kernel specific
-# defconfig (do *NOT* increment anything in here for changes
-# to other kernel configs!)
-PR_CONFIG = "0"
-#
-# Increment the number below (i.e. the digits after PR) when
-# making changes within this file or for changes to the patches
-# applied to the kernel.
-PR = "r3.${PR_CONFIG}"
-
-require nslu2-kernel.inc
-
-# N2K_PATCHES - full list of patches to apply
-N2K_PATCHES = "\
- file://00-memory-h-page-shift.patch;patch=1 \
- file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \
- file://15-jffs2-endian-config.patch;patch=1 \
- file://40-rtc-class.patch;patch=1 \
- file://40-scsi-idle.patch;patch=1 \
- file://60-nslu2-beeper.patch;patch=1 \
- file://75-nslu2-leds.patch;patch=1 \
- file://80-nslu2-io.patch;patch=1 \
- file://85-timer.patch;patch=1 \
- file://91-maclist.patch;patch=1 \
- file://92-nslu2-maclist.patch;patch=1 \
- file://anonymiser.patch;patch=1 \
-"
-
-# These options get added to the kernel command line, only put things
-# specific to the bootstrap of *this* kernel in here - DISTRO specfic
-# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
-# in nslu2-kernel.inc)
-CMDLINE_KERNEL_OPTIONS = "rtc-x1205.hctosys=1 rtc-x1205.probe=0,0x6f"
+++ /dev/null
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.4.22/drivers/usb/Config.in~linksys_can_bite_me 2004-09-08 19:14:15.000000000 -0500
-+++ linux-2.4.22/drivers/usb/Config.in 2004-09-08 19:19:37.000000000 -0500
-@@ -120,6 +120,4 @@
- fi
- fi
-
--source drivers/usb/gadget/Config.in
--
- endmenu
---- linux-2.4.22/drivers/ixp400/Makefile~linksys_can_bite_me 2004-09-08 19:14:08.000000000 -0500
-+++ linux-2.4.22/drivers/ixp400/Makefile 2004-09-08 19:32:55.000000000 -0500
-@@ -78,7 +78,9 @@
- # DAMAGE."
- #
- # -- End Intel/GPL Copyright Notice --
-+#
-
-+ifdef CONFIG_IXP425_CSR
- include $(ROOTDIR)/IXP400lib/ixp400_xscale_sw/buildUtils/environment.linux
- # IX_XSCALE_SW=$(ROOTDIR)/IXP400lib/ixp400_xscale_sw/
- # The kernel makefiles override the value of CFLAGS on the make
-@@ -148,6 +150,7 @@
- # directory. Note that they must be filenames in this directory - the
- # ramdisk rules cannot handle paths in this list.
- obj-m := $(IXP400_MODULES)
-+endif
-
- # Include the generic kernel build system rules
- include $(TOPDIR)/Rules.make
+++ /dev/null
---- linux-2.6.9-rc3-ds1.commit/arch/arm/nwfpe/double_cpdo.c 2004-08-14 07:36:11.000000000 +0200
-+++ linux-2.6.9-rc3-ds1.snap/arch/arm/nwfpe/double_cpdo.c 2004-10-10 20:29:15.514512796 +0200
-@@ -75,7 +75,11 @@
- union float64_components u;
-
- u.f64 = rFm;
-+#ifdef __ARMEB__
-+ u.i[0] ^= 0x80000000;
-+#else
- u.i[1] ^= 0x80000000;
-+#endif
-
- return u.f64;
- }
-@@ -85,7 +89,11 @@
- union float64_components u;
-
- u.f64 = rFm;
-+#ifdef __ARMEB__
-+ u.i[0] &= 0x7fffffff;
-+#else
- u.i[1] &= 0x7fffffff;
-+#endif
-
- return u.f64;
- }
-
+++ /dev/null
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.4.22/include/asm-arm/system.h~gcc-registerparanoia 2004-09-08 19:45:34.000000000 -0500
-+++ linux-2.4.22/include/asm-arm/system.h 2004-09-08 19:53:01.000000000 -0500
-@@ -3,6 +3,15 @@
-
- #ifdef __KERNEL__
-
-+/*
-+ * This is used to ensure the compiler did actually allocate the register we
-+ * asked it for some inline assembly sequences. Apparently we can't trust
-+ * the compiler from one version to another so a bit of paranoia won't hurt.
-+ * This string is meant to be concatenated with the inline asm string and
-+ * will cause compilation to stop on mismatch.
-+ */
-+#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t"
-+
- #include <linux/config.h>
- #include <linux/kernel.h>
-
---- linux-2.4.22/include/asm-arm/uaccess.h~gcc-registerparanoia 2004-09-08 19:45:34.000000000 -0500
-+++ linux-2.4.22/include/asm-arm/uaccess.h 2004-09-08 19:59:20.000000000 -0500
-@@ -6,6 +6,7 @@
- */
- #include <linux/sched.h>
- #include <asm/errno.h>
-+#include <asm/system.h>
-
- #define VERIFY_READ 0
- #define VERIFY_WRITE 1
-@@ -71,7 +72,9 @@
- extern int __get_user_bad(void);
-
- #define __get_user_x(__r1,__p,__e,__s,__i...) \
-- __asm__ __volatile__ ("bl __get_user_" #__s \
-+ __asm__ __volatile__ ( \
-+ __asmeq("%0", "r0") __asmeq("%1", "r1") \
-+ "bl __get_user_" #__s \
- : "=&r" (__e), "=r" (__r1) \
- : "0" (__p) \
- : __i)
-@@ -110,7 +113,9 @@
- extern int __put_user_bad(void);
-
- #define __put_user_x(__r1,__p,__e,__s,__i...) \
-- __asm__ __volatile__ ("bl __put_user_" #__s \
-+ __asm__ __volatile__ ( \
-+ __asmeq("%0", "r0") __asmeq("%2", "r1") \
-+ "bl __put_user_" #__s \
- : "=&r" (__e) \
- : "0" (__p), "r" (__r1) \
- : __i)
---- linux-2.4.22/-~gcc-registerparanoia
-+++ linux-2.4.22/-
+++ /dev/null
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.4.22/arch/arm/lib/getuser.S~gcc3-userfuncs 2004-09-08 19:14:05.000000000 -0500
-+++ linux-2.4.22/arch/arm/lib/getuser.S 2004-09-08 19:49:27.000000000 -0500
-@@ -42,17 +42,17 @@
-
- .global __get_user_2
- __get_user_2:
-- bic r2, sp, #0x1f00
-- bic r2, r2, #0x00ff
-- ldr r2, [r2, #TSK_ADDR_LIMIT]
-- sub r2, r2, #2
-- cmp r0, r2
-+ bic ip, sp, #0x1f00
-+ bic ip, ip, #0x00ff
-+ ldr ip, [ip, #TSK_ADDR_LIMIT]
-+ sub ip, ip, #2
-+ cmp r0, ip
- 2: ldrlsbt r1, [r0], #1
--3: ldrlsbt r2, [r0]
-+3: ldrlsbt ip, [r0]
- #ifndef __ARMEB__
-- orrls r1, r1, r2, lsl #8
-+ orrls r1, r1, ip, lsl #8
- #else
-- orrls r1, r2, r1, lsl #8
-+ orrls r1, ip, r1, lsl #8
- #endif
- movls r0, #0
- movls pc, lr
---- linux-2.4.22/arch/arm/lib/putuser.S~gcc3-userfuncs 2004-09-08 19:14:05.000000000 -0500
-+++ linux-2.4.22/arch/arm/lib/putuser.S 2004-09-08 19:45:00.000000000 -0500
-@@ -18,7 +18,7 @@
- * Inputs: r0 contains the address
- * r1, r2 contains the value
- * Outputs: r0 is the error code
-- * lr corrupted
-+ * ip, lr corrupted
- *
- * No other registers must be altered. (see include/asm-arm/uaccess.h
- * for specific ASM register usage).
-@@ -30,11 +30,11 @@
-
- .global __put_user_1
- __put_user_1:
-- bic r2, sp, #0x1f00
-- bic r2, r2, #0x00ff
-- ldr r2, [r2, #TSK_ADDR_LIMIT]
-- sub r2, r2, #1
-- cmp r0, r2
-+ bic ip, sp, #0x1f00
-+ bic ip, ip, #0x00ff
-+ ldr ip, [ip, #TSK_ADDR_LIMIT]
-+ sub ip, ip, #1
-+ cmp r0, ip
- 1: strlsbt r1, [r0]
- movls r0, #0
- movls pc, lr
-@@ -42,20 +42,20 @@
-
- .global __put_user_2
- __put_user_2:
-- bic r2, sp, #0x1f00
-- bic r2, r2, #0x00ff
-- ldr r2, [r2, #TSK_ADDR_LIMIT]
-- sub r2, r2, #2
-- cmp r0, r2
-+ bic ip, sp, #0x1f00
-+ bic ip, ip, #0x00ff
-+ ldr ip, [ip, #TSK_ADDR_LIMIT]
-+ sub ip, ip, #2
-+ cmp r0, ip
- #ifndef __ARMEB__
- 2: strlsbt r1, [r0], #1
- movls r1, r1, lsr #8
- 3: strlsbt r1, [r0]
- #else
--2: movls r2, r1
-+2: movls ip, r1
- movls r1, r1, lsr #8
- strlsbt r1, [r0], #1
-- movls r1, r2
-+ movls r1, ip
- 3: strlsbt r1, [r0]
- #endif
- movls r0, #0
-@@ -64,11 +64,11 @@
-
- .global __put_user_4
- __put_user_4:
-- bic r2, sp, #0x1f00
-- bic r2, r2, #0x00ff
-- ldr r2, [r2, #TSK_ADDR_LIMIT]
-- sub r2, r2, #4
-- cmp r0, r2
-+ bic ip, sp, #0x1f00
-+ bic ip, ip, #0x00ff
-+ ldr ip, [ip, #TSK_ADDR_LIMIT]
-+ sub ip, ip, #4
-+ cmp r0, ip
- 4: strlst r1, [r0]
- movls r0, #0
- movls pc, lr
---- linux-2.4.22/include/asm-arm/uaccess.h~gcc3-userfuncs 2004-09-08 19:36:03.000000000 -0500
-+++ linux-2.4.22/include/asm-arm/uaccess.h 2004-09-08 20:03:34.000000000 -0500
-@@ -86,7 +86,7 @@
- __get_user_x(__r1, __p, __e, 1, "lr"); \
- break; \
- case 2: \
-- __get_user_x(__r1, __p, __e, 2, "r2", "lr"); \
-+ __get_user_x(__r1, __p, __e, 2, "ip", "lr"); \
- break; \
- case 4: \
- __get_user_x(__r1, __p, __e, 4, "lr"); \
-@@ -122,13 +122,13 @@
- register int __e asm("r0"); \
- switch (sizeof(*(p))) { \
- case 1: \
-- __put_user_x(__r1, __p, __e, 1, "r2", "lr"); \
-+ __put_user_x(__r1, __p, __e, 1, "ip", "lr"); \
- break; \
- case 2: \
-- __put_user_x(__r1, __p, __e, 2, "r2", "lr"); \
-+ __put_user_x(__r1, __p, __e, 2, "ip", "lr"); \
- break; \
- case 4: \
-- __put_user_x(__r1, __p, __e, 4, "r2", "lr"); \
-+ __put_user_x(__r1, __p, __e, 4, "ip", "lr"); \
- break; \
- case 8: \
- __put_user_x(__r1, __p, __e, 8, "ip", "lr"); \
+++ /dev/null
-diff -purN linux-2.4.24-uc0.orig/include/asm-arm/setup.h linux-2.4.24-uc0/include/asm-arm/setup.h
---- linux-2.4.24-uc0.orig/include/asm-arm/setup.h 2003-08-25 04:44:43.000000000 -0700
-+++ linux-2.4.24-uc0/include/asm-arm/setup.h 2004-09-09 04:36:03.000000000 -0700
-@@ -236,7 +236,7 @@ struct tagtable {
- int (*parse)(const struct tag *);
- };
-
--#define __tag __attribute__((unused, __section__(".taglist")))
-+#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
- #define __tagtable(tag, fn) \
- static struct tagtable __tagtable_##fn __tag = { tag, fn }
-
-diff -purN linux-2.4.24-uc0.orig/include/linux/compiler.h linux-2.4.24-uc0/include/linux/compiler.h
---- linux-2.4.24-uc0.orig/include/linux/compiler.h 2004-03-31 21:52:49.000000000 -0800
-+++ linux-2.4.24-uc0/include/linux/compiler.h 2004-09-09 01:33:29.000000000 -0700
-@@ -13,4 +13,18 @@
- #define likely(x) __builtin_expect((x),1)
- #define unlikely(x) __builtin_expect((x),0)
-
-+#if __GNUC__ > 3
-+#define __attribute_used__ __attribute__((__used__))
-+#elif __GNUC__ == 3
-+#if __GNUC_MINOR__ >= 3
-+# define __attribute_used__ __attribute__((__used__))
-+#else
-+# define __attribute_used__ __attribute__((__unused__))
-+#endif /* __GNUC_MINOR__ >= 3 */
-+#elif __GNUC__ == 2
-+#define __attribute_used__ __attribute__((__unused__))
-+#else
-+#define __attribute_used__ /* not implemented */
-+#endif /* __GNUC__ */
-+
- #endif /* __LINUX_COMPILER_H */
-diff -purN linux-2.4.24-uc0.orig/include/linux/init.h linux-2.4.24-uc0/include/linux/init.h
---- linux-2.4.24-uc0.orig/include/linux/init.h 2004-03-31 21:52:50.000000000 -0800
-+++ linux-2.4.24-uc0/include/linux/init.h 2004-09-09 01:38:11.000000000 -0700
-@@ -2,6 +2,7 @@
- #define _LINUX_INIT_H
-
- #include <linux/config.h>
-+#include <linux/compiler.h>
-
- /* These macros are used to mark some functions or
- * initialized data (doesn't apply to uninitialized data)
-@@ -51,7 +52,7 @@ typedef void (*exitcall_t)(void);
- extern initcall_t __initcall_start, __initcall_end;
-
- #define __initcall(fn) \
-- static initcall_t __initcall_##fn __init_call = fn
-+ static initcall_t __initcall_##fn __attribute_used__ __init_call = fn
- #define __exitcall(fn) \
- static exitcall_t __exitcall_##fn __exit_call = fn
-
-@@ -67,7 +68,7 @@ extern struct kernel_param __setup_start
-
- #define __setup(str, fn) \
- static char __setup_str_##fn[] __initdata = str; \
-- static struct kernel_param __setup_##fn __attribute__((unused)) __initsetup = { __setup_str_##fn, fn }
-+ static struct kernel_param __setup_##fn __attribute_used__ __initsetup = { __setup_str_##fn, fn }
-
- #endif /* __ASSEMBLY__ */
-
-@@ -77,16 +78,16 @@ extern struct kernel_param __setup_start
- */
- #ifndef NO_TEXT_SECTIONS
- #define __init __attribute__ ((__section__ (".text.init")))
--#define __exit __attribute__ ((unused, __section__(".text.exit")))
-+#define __exit __attribute_used__ __attribute__ ((__section__(".text.exit")))
- #else
- #define __init
--#define __exit __attribute__ ((unused))
-+#define __exit __attribute_used__
- #endif
- #define __initdata __attribute__ ((__section__ (".data.init")))
--#define __exitdata __attribute__ ((unused, __section__ (".data.exit")))
--#define __initsetup __attribute__ ((unused,__section__ (".setup.init")))
--#define __init_call __attribute__ ((unused,__section__ (".initcall.init")))
--#define __exit_call __attribute__ ((unused,__section__ (".exitcall.exit")))
-+#define __exitdata __attribute_used__ __attribute__ ((__section__ (".data.exit")))
-+#define __initsetup __attribute_used__ __attribute__ ((__section__ (".setup.init")))
-+#define __init_call __attribute_used__ __attribute__ ((__section__ (".initcall.init")))
-+#define __exit_call __attribute_used__ __attribute__ ((__section__ (".exitcall.exit")))
-
- /* For assembly routines */
- #define __INIT .section ".text.init","ax"
-diff -purN linux-2.4.24-uc0.orig/include/linux/module.h linux-2.4.24-uc0/include/linux/module.h
---- linux-2.4.24-uc0.orig/include/linux/module.h 2002-08-02 17:39:45.000000000 -0700
-+++ linux-2.4.24-uc0/include/linux/module.h 2004-09-09 03:15:30.000000000 -0700
-@@ -8,6 +8,7 @@
- #define _LINUX_MODULE_H
-
- #include <linux/config.h>
-+#include <linux/compiler.h>
- #include <linux/spinlock.h>
- #include <linux/list.h>
-
-@@ -254,9 +255,9 @@ __attribute__((section(".modinfo"))) =
- */
- #define MODULE_GENERIC_TABLE(gtype,name) \
- static const unsigned long __module_##gtype##_size \
-- __attribute__ ((unused)) = sizeof(struct gtype##_id); \
-+ __attribute_used__ = sizeof(struct gtype##_id); \
- static const struct gtype##_id * __module_##gtype##_table \
-- __attribute__ ((unused)) = name
-+ __attribute_used__ = name
-
- /*
- * The following license idents are currently accepted as indicating free
-@@ -284,7 +285,7 @@ static const struct gtype##_id * __modul
- */
-
- #define MODULE_LICENSE(license) \
--static const char __module_license[] __attribute__((section(".modinfo"))) = \
-+static const char __module_license[] __attribute_used__ __attribute__((section(".modinfo"))) = \
- "license=" license
-
- /* Define the module variable, and usage macros. */
-@@ -296,10 +297,10 @@ extern struct module __this_module;
- #define MOD_IN_USE __MOD_IN_USE(THIS_MODULE)
-
- #include <linux/version.h>
--static const char __module_kernel_version[] __attribute__((section(".modinfo"))) =
-+static const char __module_kernel_version[] __attribute_used__ __attribute__((section(".modinfo"))) =
- "kernel_version=" UTS_RELEASE;
- #ifdef MODVERSIONS
--static const char __module_using_checksums[] __attribute__((section(".modinfo"))) =
-+static const char __module_using_checksums[] __attribute_used__ __attribute__((section(".modinfo"))) =
- "using_checksums=1";
- #endif
-
-@@ -319,7 +320,7 @@ static const char __module_using_checksu
- */
- #define MODULE_GENERIC_TABLE(gtype,name) \
- static const struct gtype##_id * __module_##gtype##_table \
-- __attribute__ ((unused, __section__(".data.exit"))) = name
-+ __attribute_used__ __attribute__ ((__section__(".data.exit"))) = name
-
- #ifndef __GENKSYMS__
-
+++ /dev/null
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.4.22/arch/arm/Makefile~nofpu 2004-09-08 19:34:11.000000000 -0500
-+++ linux-2.4.22/arch/arm/Makefile 2004-09-08 20:03:34.000000000 -0500
-@@ -76,7 +76,7 @@
-
- CFLAGS_BOOT :=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Uarm
- CFLAGS +=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Uarm
--AFLAGS +=$(apcs-y) $(arch-y) -mno-fpu -msoft-float
-+AFLAGS +=$(apcs-y) $(arch-y) -msoft-float
-
- ifeq ($(CONFIG_CPU_26),y)
- PROCESSOR := armo
---- linux-2.4.22/-~nofpu
-+++ linux-2.4.22/-
+++ /dev/null
-#
-# Automatically generated by make menuconfig: don't edit
-#
-CONFIG_ARM=y
-# CONFIG_EISA is not set
-# CONFIG_SBUS is not set
-# CONFIG_MCA is not set
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_GENERIC_BUST_SPINLOCK is not set
-# CONFIG_GENERIC_ISA_DMA is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_ADVANCED_OPTIONS is not set
-# CONFIG_OBSOLETE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_ADIFCC is not set
-# CONFIG_ARCH_ANAKIN is not set
-# CONFIG_ARCH_ARCA5K is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_CAMELOT is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP1200 is not set
-# CONFIG_ARCH_IXP2000 is not set
-CONFIG_ARCH_IXP425=y
-# CONFIG_ARCH_OMAHA is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_MX1ADS is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_RISCSTATION is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# Archimedes/A5000 Implementations
-#
-# CONFIG_ARCH_ARC is not set
-# CONFIG_ARCH_A5K is not set
-
-#
-# Footbridge Implementations
-#
-# CONFIG_ARCH_CATS is not set
-# CONFIG_ARCH_PERSONAL_SERVER is not set
-# CONFIG_ARCH_EBSA285_ADDIN is not set
-# CONFIG_ARCH_EBSA285_HOST is not set
-# CONFIG_ARCH_NETWINDER is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ACCELENT is not set
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_ASSABET_NEPONSET is not set
-# CONFIG_SA1100_ADSAGC is not set
-# CONFIG_SA1100_ADSBITSY is not set
-# CONFIG_SA1100_ADSBITSYPLUS is not set
-# CONFIG_SA1100_BRUTUS is not set
-# CONFIG_SA1100_CEP is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
-# CONFIG_SA1100_H3XXX is not set
-# CONFIG_H3600_SLEEVE is not set
-# CONFIG_SA1100_EXTENEX1 is not set
-# CONFIG_SA1100_FLEXANET is not set
-# CONFIG_SA1100_FREEBIRD is not set
-# CONFIG_SA1100_FRODO is not set
-# CONFIG_SA1100_GRAPHICSCLIENT is not set
-# CONFIG_SA1100_GRAPHICSMASTER is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HUW_WEBPANEL is not set
-# CONFIG_SA1100_ITSY is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_NANOENGINE is not set
-# CONFIG_SA1100_OMNIMETER is not set
-# CONFIG_SA1100_PANGOLIN is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_PT_SYSTEM3 is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SHERMAN is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SIMPUTER is not set
-# CONFIG_SA1100_PFS168 is not set
-# CONFIG_SA1100_VICTOR is not set
-# CONFIG_SA1100_XP860 is not set
-# CONFIG_SA1100_YOPY is not set
-# CONFIG_SA1100_USB is not set
-# CONFIG_SA1100_USB_NETLINK is not set
-# CONFIG_SA1100_USB_CHAR is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# IXP425 Implementation Options
-#
-CONFIG_ARCH_IXDP425=y
-# CONFIG_ARCH_IXCDP1100 is not set
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_ARCH_IXP425_COYOTE is not set
-# CONFIG_ARCH_SE4000 is not set
-CONFIG_IXP425_SDRAM_SIZE=32
-# CONFIG_IXP425_LARGE_SDRAM is not set
-CONFIG_IXP425_PCI_ERRATA=y
-# CONFIG_IXP425_OS_TIMER1 is not set
-# CONFIG_XSCALE_PMU_TIMER is not set
-# CONFIG_IXP425_CSR is not set
-
-#
-# AT91RM9200 Implementations
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_FORTUNET is not set
-# CONFIG_ARCH_GUIDEA07 is not set
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_EP7211 is not set
-# CONFIG_ARCH_EP7212 is not set
-# CONFIG_ARCH_ACORN is not set
-# CONFIG_FOOTBRIDGE is not set
-# CONFIG_FOOTBRIDGE_HOST is not set
-# CONFIG_FOOTBRIDGE_ADDIN is not set
-CONFIG_CPU_32=y
-# CONFIG_CPU_26 is not set
-# CONFIG_CPU_ARM610 is not set
-# CONFIG_CPU_ARM710 is not set
-# CONFIG_CPU_ARM720T is not set
-# CONFIG_CPU_ARM920T is not set
-# CONFIG_CPU_ARM922T is not set
-# CONFIG_PLD is not set
-# CONFIG_CPU_ARM926T is not set
-# CONFIG_CPU_ARM1020 is not set
-# CONFIG_CPU_ARM1026 is not set
-# CONFIG_CPU_SA110 is not set
-# CONFIG_CPU_SA1100 is not set
-# CONFIG_CPU_32v3 is not set
-# CONFIG_CPU_32v4 is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_XSCALE=y
-CONFIG_ARM_THUMB=y
-# CONFIG_XSCALE_PMU_TIMER is not set
-# CONFIG_XSCALE_CACHE_ERRATA is not set
-# CONFIG_XSCALE_BDI2000 is not set
-# CONFIG_DISCONTIGMEM is not set
-CONFIG_CPU_BIG_ENDIAN=y
-
-#
-# General setup
-#
-CONFIG_PCI=y
-CONFIG_PCI_AUTOCONFIG=y
-# CONFIG_ISA is not set
-# CONFIG_ISA_DMA is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_ZBOOT_ROM is not set
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_PCI_NAMES=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_PCMCIA is not set
-CONFIG_NET=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_PM is not set
-# CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 initrd=0x01000000,10M mem=32M@0x00000000"
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_AMDSTD is not set
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_JEDEC is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_DRAGONIX is not set
-# CONFIG_MTD_NETtel is not set
-# CONFIG_MTD_SNAPGEODE is not set
-# CONFIG_MTD_NETteluC is not set
-# CONFIG_MTD_MBVANILLA is not set
-# CONFIG_MTD_KeyTechnology is not set
-# CONFIG_MTD_NORA is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_CDB89712 is not set
-# CONFIG_MTD_SA1100 is not set
-# CONFIG_MTD_DC21285 is not set
-# CONFIG_MTD_IQ80310 is not set
-# CONFIG_MTD_EPXA10DB is not set
-# CONFIG_MTD_FORTUNET is not set
-# CONFIG_MTD_AUTCPU12 is not set
-CONFIG_MTD_IXP425=y
-# CONFIG_MTD_IXP425_COYOTE is not set
-# CONFIG_MTD_SE4000 is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_CEIVA is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_DOCPROBE is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_RAMDISK_DATA is not set
-# CONFIG_BLK_DEV_BLKMEM is not set
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_FILTER=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_MULTIPATH_SEQUENTIAL is not set
-# CONFIG_IP_ROUTE_TOS is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_ARP_LIMIT is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-# CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_IPSEC is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_ARM_AM79C961A is not set
-# CONFIG_ARM_CIRRUS is not set
-# CONFIG_IXP425_ETH is not set
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139CP_EXTERNAL_PHY is not set
-CONFIG_8139CP_PHY_NUM=32
-# CONFIG_8139TOO is not set
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_RTL8139 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNDANCE_MMIO is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_RHINE_FET is not set
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_FEC is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_UCCS8900 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI support
-#
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SD_EXTRA_DEVS=40
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_SCSI_DEBUG_QUEUES is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_DMA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NCR53C7xx is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_NCR53C8XX is not set
-# CONFIG_SCSI_SYM53C8XX is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_SIM710 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-
-#
-# Character devices
-#
-# CONFIG_LEDMAN is not set
-# CONFIG_DS1302 is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_PHILIPSPAR is not set
-# CONFIG_I2C_ELV is not set
-# CONFIG_I2C_VELLEMAN is not set
-# CONFIG_I2C_MCF_GPIO is not set
-CONFIG_I2C_IXP425=y
-# CONFIG_SCx200_I2C is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_ALGOPCF is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_PROC is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-CONFIG_MOUSE=y
-CONFIG_PSMOUSE=y
-# CONFIG_82C710_MOUSE is not set
-# CONFIG_PC110_PAD is not set
-# CONFIG_MK712_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Controller Area Network Cards/Chips
-#
-# CONFIG_CAN4LINUX is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_X1226_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-CONFIG_VFAT_FS=y
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_DMAPI is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_LOCKD is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-# CONFIG_COREDUMP_PRINTK is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-CONFIG_OSF_PARTITION=y
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-CONFIG_SMB_NLS=y
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# Misc devices
-#
-
-#
-# USB support
-#
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_UHCI=y
-# CONFIG_USB_UHCI_ALT is not set
-CONFIG_USB_OHCI=y
-# CONFIG_USB_SL811HS_ALT is not set
-# CONFIG_USB_SL811HS is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_BLUETOOTH is not set
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_HOTPLUG_SCSIDEV_NUMBER is not set
-CONFIG_USB_STORAGE_MAXTOR_ONETOUCH=y
-CONFIG_USB_STORAGE_MAXTOR_ONETOUCH_DEBUG=y
-# CONFIG_USB_STORAGE_MAXTOR_ONETOUCH_USB_EVENT is not set
-CONFIG_USB_STORAGE_MAXTOR_ONETOUCH_PERSO=y
-CONFIG_USB_STORAGE_MAXTOR_ONETOUCH_PERSO_APP_PATH="/sbin/onetouch"
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDINPUT is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_AX8817X is not set
-# CONFIG_USB_CDCETHER is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_BRLVGER is not set
-# CONFIG_USB_LCD is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BLUEZ is not set
-
-#
-# Kernel hacking
-#
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_NO_PGT_CACHE is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_WAITQ is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_DC21285_PORT is not set
-# CONFIG_DEBUG_CLPS711X_UART2 is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- linux-2.4.22/arch/arm/Makefile~short_loadbytes 2004-09-08 19:34:45.000000000 -0500
-+++ linux-2.4.22/arch/arm/Makefile 2004-09-08 19:34:53.000000000 -0500
-@@ -74,8 +74,8 @@
- tune-$(CONFIG_CPU_XSCALE) :=-mtune=strongarm
- endif
-
--CFLAGS_BOOT :=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Uarm
--CFLAGS +=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Uarm
-+CFLAGS_BOOT :=$(apcs-y) $(arch-y) $(tune-y) $(call check_gcc,-malignment-traps,-mshort-load-bytes) -msoft-float -Uarm
-+CFLAGS +=$(apcs-y) $(arch-y) $(tune-y) $(call check_gcc,-malignment-traps,-mshort-load-bytes) -msoft-float -Uarm
- AFLAGS +=$(apcs-y) $(arch-y) -msoft-float
-
- ifeq ($(CONFIG_CPU_26),y)
+++ /dev/null
-SECTION = "kernel"
-DESCRIPTION = "Linux kernel for the Linksys NSLU2 device"
-LICENSE = "GPL"
-PR = "r2"
-
-SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.4/linux-2.4.22.tar.bz2 \
- http://nslu.sf.net/downloads/xfs-2.4.22-all-i386.bz2;patch=1 \
- http://nslu.sf.net/downloads/2.4.22-xfs-nslu2.patch.bz2;patch=1 \
- file://config-fixes.patch;patch=1 \
- file://nofpu.patch;patch=1 \
- file://short_loadbytes.patch;patch=1 \
- file://gcc3-userfuncs.patch;patch=1 \
- file://gcc-registerparanoia.patch;patch=1 \
- file://linux-2.4.24-attribute-used.patch;patch=1 \
- file://double_cpdo.patch;patch=1 \
- file://defconfig"
-S = "${WORKDIR}/linux-2.4.22"
-
-COMPATIBLE_HOST = 'arm.*-linux'
-COMPATIBLE_MACHINE = "nslu2"
-
-inherit kernel
-
-ARCH = "arm"
-KERNEL_IMAGETYPE = "zImage"
-KERNEL_SUFFIX ?= "nslu2-linksys"
-CMDLINE_CONSOLE ?= "ttyS0,115200"
-CMDLINE_ROOT = "root=/dev/ram0 initrd=0x01000000,10M mem=32M@0x00000000"
-CMDLINE = "${CMDLINE_CONSOLE} ${CMDLINE_ROOT}"
-
-do_configure_prepend() {
- install -m 0644 ${WORKDIR}/defconfig ${S}/.config
- echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config
- rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \
- ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch
-}
-
-do_deploy() {
- install -d ${DEPLOY_DIR_IMAGE}
- install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${KERNEL_SUFFIX}
-}
-
-do_deploy[dirs] = "${S}"
-
-addtask deploy before do_build after do_compile
--- /dev/null
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+--- linux-2.4.22/drivers/usb/Config.in~linksys_can_bite_me 2004-09-08 19:14:15.000000000 -0500
++++ linux-2.4.22/drivers/usb/Config.in 2004-09-08 19:19:37.000000000 -0500
+@@ -120,6 +120,4 @@
+ fi
+ fi
+
+-source drivers/usb/gadget/Config.in
+-
+ endmenu
+--- linux-2.4.22/drivers/ixp400/Makefile~linksys_can_bite_me 2004-09-08 19:14:08.000000000 -0500
++++ linux-2.4.22/drivers/ixp400/Makefile 2004-09-08 19:32:55.000000000 -0500
+@@ -78,7 +78,9 @@
+ # DAMAGE."
+ #
+ # -- End Intel/GPL Copyright Notice --
++#
+
++ifdef CONFIG_IXP425_CSR
+ include $(ROOTDIR)/IXP400lib/ixp400_xscale_sw/buildUtils/environment.linux
+ # IX_XSCALE_SW=$(ROOTDIR)/IXP400lib/ixp400_xscale_sw/
+ # The kernel makefiles override the value of CFLAGS on the make
+@@ -148,6 +150,7 @@
+ # directory. Note that they must be filenames in this directory - the
+ # ramdisk rules cannot handle paths in this list.
+ obj-m := $(IXP400_MODULES)
++endif
+
+ # Include the generic kernel build system rules
+ include $(TOPDIR)/Rules.make
--- /dev/null
+--- linux-2.6.9-rc3-ds1.commit/arch/arm/nwfpe/double_cpdo.c 2004-08-14 07:36:11.000000000 +0200
++++ linux-2.6.9-rc3-ds1.snap/arch/arm/nwfpe/double_cpdo.c 2004-10-10 20:29:15.514512796 +0200
+@@ -75,7 +75,11 @@
+ union float64_components u;
+
+ u.f64 = rFm;
++#ifdef __ARMEB__
++ u.i[0] ^= 0x80000000;
++#else
+ u.i[1] ^= 0x80000000;
++#endif
+
+ return u.f64;
+ }
+@@ -85,7 +89,11 @@
+ union float64_components u;
+
+ u.f64 = rFm;
++#ifdef __ARMEB__
++ u.i[0] &= 0x7fffffff;
++#else
+ u.i[1] &= 0x7fffffff;
++#endif
+
+ return u.f64;
+ }
+
--- /dev/null
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+--- linux-2.4.22/include/asm-arm/system.h~gcc-registerparanoia 2004-09-08 19:45:34.000000000 -0500
++++ linux-2.4.22/include/asm-arm/system.h 2004-09-08 19:53:01.000000000 -0500
+@@ -3,6 +3,15 @@
+
+ #ifdef __KERNEL__
+
++/*
++ * This is used to ensure the compiler did actually allocate the register we
++ * asked it for some inline assembly sequences. Apparently we can't trust
++ * the compiler from one version to another so a bit of paranoia won't hurt.
++ * This string is meant to be concatenated with the inline asm string and
++ * will cause compilation to stop on mismatch.
++ */
++#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t"
++
+ #include <linux/config.h>
+ #include <linux/kernel.h>
+
+--- linux-2.4.22/include/asm-arm/uaccess.h~gcc-registerparanoia 2004-09-08 19:45:34.000000000 -0500
++++ linux-2.4.22/include/asm-arm/uaccess.h 2004-09-08 19:59:20.000000000 -0500
+@@ -6,6 +6,7 @@
+ */
+ #include <linux/sched.h>
+ #include <asm/errno.h>
++#include <asm/system.h>
+
+ #define VERIFY_READ 0
+ #define VERIFY_WRITE 1
+@@ -71,7 +72,9 @@
+ extern int __get_user_bad(void);
+
+ #define __get_user_x(__r1,__p,__e,__s,__i...) \
+- __asm__ __volatile__ ("bl __get_user_" #__s \
++ __asm__ __volatile__ ( \
++ __asmeq("%0", "r0") __asmeq("%1", "r1") \
++ "bl __get_user_" #__s \
+ : "=&r" (__e), "=r" (__r1) \
+ : "0" (__p) \
+ : __i)
+@@ -110,7 +113,9 @@
+ extern int __put_user_bad(void);
+
+ #define __put_user_x(__r1,__p,__e,__s,__i...) \
+- __asm__ __volatile__ ("bl __put_user_" #__s \
++ __asm__ __volatile__ ( \
++ __asmeq("%0", "r0") __asmeq("%2", "r1") \
++ "bl __put_user_" #__s \
+ : "=&r" (__e) \
+ : "0" (__p), "r" (__r1) \
+ : __i)
+--- linux-2.4.22/-~gcc-registerparanoia
++++ linux-2.4.22/-
--- /dev/null
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+--- linux-2.4.22/arch/arm/lib/getuser.S~gcc3-userfuncs 2004-09-08 19:14:05.000000000 -0500
++++ linux-2.4.22/arch/arm/lib/getuser.S 2004-09-08 19:49:27.000000000 -0500
+@@ -42,17 +42,17 @@
+
+ .global __get_user_2
+ __get_user_2:
+- bic r2, sp, #0x1f00
+- bic r2, r2, #0x00ff
+- ldr r2, [r2, #TSK_ADDR_LIMIT]
+- sub r2, r2, #2
+- cmp r0, r2
++ bic ip, sp, #0x1f00
++ bic ip, ip, #0x00ff
++ ldr ip, [ip, #TSK_ADDR_LIMIT]
++ sub ip, ip, #2
++ cmp r0, ip
+ 2: ldrlsbt r1, [r0], #1
+-3: ldrlsbt r2, [r0]
++3: ldrlsbt ip, [r0]
+ #ifndef __ARMEB__
+- orrls r1, r1, r2, lsl #8
++ orrls r1, r1, ip, lsl #8
+ #else
+- orrls r1, r2, r1, lsl #8
++ orrls r1, ip, r1, lsl #8
+ #endif
+ movls r0, #0
+ movls pc, lr
+--- linux-2.4.22/arch/arm/lib/putuser.S~gcc3-userfuncs 2004-09-08 19:14:05.000000000 -0500
++++ linux-2.4.22/arch/arm/lib/putuser.S 2004-09-08 19:45:00.000000000 -0500
+@@ -18,7 +18,7 @@
+ * Inputs: r0 contains the address
+ * r1, r2 contains the value
+ * Outputs: r0 is the error code
+- * lr corrupted
++ * ip, lr corrupted
+ *
+ * No other registers must be altered. (see include/asm-arm/uaccess.h
+ * for specific ASM register usage).
+@@ -30,11 +30,11 @@
+
+ .global __put_user_1
+ __put_user_1:
+- bic r2, sp, #0x1f00
+- bic r2, r2, #0x00ff
+- ldr r2, [r2, #TSK_ADDR_LIMIT]
+- sub r2, r2, #1
+- cmp r0, r2
++ bic ip, sp, #0x1f00
++ bic ip, ip, #0x00ff
++ ldr ip, [ip, #TSK_ADDR_LIMIT]
++ sub ip, ip, #1
++ cmp r0, ip
+ 1: strlsbt r1, [r0]
+ movls r0, #0
+ movls pc, lr
+@@ -42,20 +42,20 @@
+
+ .global __put_user_2
+ __put_user_2:
+- bic r2, sp, #0x1f00
+- bic r2, r2, #0x00ff
+- ldr r2, [r2, #TSK_ADDR_LIMIT]
+- sub r2, r2, #2
+- cmp r0, r2
++ bic ip, sp, #0x1f00
++ bic ip, ip, #0x00ff
++ ldr ip, [ip, #TSK_ADDR_LIMIT]
++ sub ip, ip, #2
++ cmp r0, ip
+ #ifndef __ARMEB__
+ 2: strlsbt r1, [r0], #1
+ movls r1, r1, lsr #8
+ 3: strlsbt r1, [r0]
+ #else
+-2: movls r2, r1
++2: movls ip, r1
+ movls r1, r1, lsr #8
+ strlsbt r1, [r0], #1
+- movls r1, r2
++ movls r1, ip
+ 3: strlsbt r1, [r0]
+ #endif
+ movls r0, #0
+@@ -64,11 +64,11 @@
+
+ .global __put_user_4
+ __put_user_4:
+- bic r2, sp, #0x1f00
+- bic r2, r2, #0x00ff
+- ldr r2, [r2, #TSK_ADDR_LIMIT]
+- sub r2, r2, #4
+- cmp r0, r2
++ bic ip, sp, #0x1f00
++ bic ip, ip, #0x00ff
++ ldr ip, [ip, #TSK_ADDR_LIMIT]
++ sub ip, ip, #4
++ cmp r0, ip
+ 4: strlst r1, [r0]
+ movls r0, #0
+ movls pc, lr
+--- linux-2.4.22/include/asm-arm/uaccess.h~gcc3-userfuncs 2004-09-08 19:36:03.000000000 -0500
++++ linux-2.4.22/include/asm-arm/uaccess.h 2004-09-08 20:03:34.000000000 -0500
+@@ -86,7 +86,7 @@
+ __get_user_x(__r1, __p, __e, 1, "lr"); \
+ break; \
+ case 2: \
+- __get_user_x(__r1, __p, __e, 2, "r2", "lr"); \
++ __get_user_x(__r1, __p, __e, 2, "ip", "lr"); \
+ break; \
+ case 4: \
+ __get_user_x(__r1, __p, __e, 4, "lr"); \
+@@ -122,13 +122,13 @@
+ register int __e asm("r0"); \
+ switch (sizeof(*(p))) { \
+ case 1: \
+- __put_user_x(__r1, __p, __e, 1, "r2", "lr"); \
++ __put_user_x(__r1, __p, __e, 1, "ip", "lr"); \
+ break; \
+ case 2: \
+- __put_user_x(__r1, __p, __e, 2, "r2", "lr"); \
++ __put_user_x(__r1, __p, __e, 2, "ip", "lr"); \
+ break; \
+ case 4: \
+- __put_user_x(__r1, __p, __e, 4, "r2", "lr"); \
++ __put_user_x(__r1, __p, __e, 4, "ip", "lr"); \
+ break; \
+ case 8: \
+ __put_user_x(__r1, __p, __e, 8, "ip", "lr"); \
--- /dev/null
+diff -purN linux-2.4.24-uc0.orig/include/asm-arm/setup.h linux-2.4.24-uc0/include/asm-arm/setup.h
+--- linux-2.4.24-uc0.orig/include/asm-arm/setup.h 2003-08-25 04:44:43.000000000 -0700
++++ linux-2.4.24-uc0/include/asm-arm/setup.h 2004-09-09 04:36:03.000000000 -0700
+@@ -236,7 +236,7 @@ struct tagtable {
+ int (*parse)(const struct tag *);
+ };
+
+-#define __tag __attribute__((unused, __section__(".taglist")))
++#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
+ #define __tagtable(tag, fn) \
+ static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+diff -purN linux-2.4.24-uc0.orig/include/linux/compiler.h linux-2.4.24-uc0/include/linux/compiler.h
+--- linux-2.4.24-uc0.orig/include/linux/compiler.h 2004-03-31 21:52:49.000000000 -0800
++++ linux-2.4.24-uc0/include/linux/compiler.h 2004-09-09 01:33:29.000000000 -0700
+@@ -13,4 +13,18 @@
+ #define likely(x) __builtin_expect((x),1)
+ #define unlikely(x) __builtin_expect((x),0)
+
++#if __GNUC__ > 3
++#define __attribute_used__ __attribute__((__used__))
++#elif __GNUC__ == 3
++#if __GNUC_MINOR__ >= 3
++# define __attribute_used__ __attribute__((__used__))
++#else
++# define __attribute_used__ __attribute__((__unused__))
++#endif /* __GNUC_MINOR__ >= 3 */
++#elif __GNUC__ == 2
++#define __attribute_used__ __attribute__((__unused__))
++#else
++#define __attribute_used__ /* not implemented */
++#endif /* __GNUC__ */
++
+ #endif /* __LINUX_COMPILER_H */
+diff -purN linux-2.4.24-uc0.orig/include/linux/init.h linux-2.4.24-uc0/include/linux/init.h
+--- linux-2.4.24-uc0.orig/include/linux/init.h 2004-03-31 21:52:50.000000000 -0800
++++ linux-2.4.24-uc0/include/linux/init.h 2004-09-09 01:38:11.000000000 -0700
+@@ -2,6 +2,7 @@
+ #define _LINUX_INIT_H
+
+ #include <linux/config.h>
++#include <linux/compiler.h>
+
+ /* These macros are used to mark some functions or
+ * initialized data (doesn't apply to uninitialized data)
+@@ -51,7 +52,7 @@ typedef void (*exitcall_t)(void);
+ extern initcall_t __initcall_start, __initcall_end;
+
+ #define __initcall(fn) \
+- static initcall_t __initcall_##fn __init_call = fn
++ static initcall_t __initcall_##fn __attribute_used__ __init_call = fn
+ #define __exitcall(fn) \
+ static exitcall_t __exitcall_##fn __exit_call = fn
+
+@@ -67,7 +68,7 @@ extern struct kernel_param __setup_start
+
+ #define __setup(str, fn) \
+ static char __setup_str_##fn[] __initdata = str; \
+- static struct kernel_param __setup_##fn __attribute__((unused)) __initsetup = { __setup_str_##fn, fn }
++ static struct kernel_param __setup_##fn __attribute_used__ __initsetup = { __setup_str_##fn, fn }
+
+ #endif /* __ASSEMBLY__ */
+
+@@ -77,16 +78,16 @@ extern struct kernel_param __setup_start
+ */
+ #ifndef NO_TEXT_SECTIONS
+ #define __init __attribute__ ((__section__ (".text.init")))
+-#define __exit __attribute__ ((unused, __section__(".text.exit")))
++#define __exit __attribute_used__ __attribute__ ((__section__(".text.exit")))
+ #else
+ #define __init
+-#define __exit __attribute__ ((unused))
++#define __exit __attribute_used__
+ #endif
+ #define __initdata __attribute__ ((__section__ (".data.init")))
+-#define __exitdata __attribute__ ((unused, __section__ (".data.exit")))
+-#define __initsetup __attribute__ ((unused,__section__ (".setup.init")))
+-#define __init_call __attribute__ ((unused,__section__ (".initcall.init")))
+-#define __exit_call __attribute__ ((unused,__section__ (".exitcall.exit")))
++#define __exitdata __attribute_used__ __attribute__ ((__section__ (".data.exit")))
++#define __initsetup __attribute_used__ __attribute__ ((__section__ (".setup.init")))
++#define __init_call __attribute_used__ __attribute__ ((__section__ (".initcall.init")))
++#define __exit_call __attribute_used__ __attribute__ ((__section__ (".exitcall.exit")))
+
+ /* For assembly routines */
+ #define __INIT .section ".text.init","ax"
+diff -purN linux-2.4.24-uc0.orig/include/linux/module.h linux-2.4.24-uc0/include/linux/module.h
+--- linux-2.4.24-uc0.orig/include/linux/module.h 2002-08-02 17:39:45.000000000 -0700
++++ linux-2.4.24-uc0/include/linux/module.h 2004-09-09 03:15:30.000000000 -0700
+@@ -8,6 +8,7 @@
+ #define _LINUX_MODULE_H
+
+ #include <linux/config.h>
++#include <linux/compiler.h>
+ #include <linux/spinlock.h>
+ #include <linux/list.h>
+
+@@ -254,9 +255,9 @@ __attribute__((section(".modinfo"))) =
+ */
+ #define MODULE_GENERIC_TABLE(gtype,name) \
+ static const unsigned long __module_##gtype##_size \
+- __attribute__ ((unused)) = sizeof(struct gtype##_id); \
++ __attribute_used__ = sizeof(struct gtype##_id); \
+ static const struct gtype##_id * __module_##gtype##_table \
+- __attribute__ ((unused)) = name
++ __attribute_used__ = name
+
+ /*
+ * The following license idents are currently accepted as indicating free
+@@ -284,7 +285,7 @@ static const struct gtype##_id * __modul
+ */
+
+ #define MODULE_LICENSE(license) \
+-static const char __module_license[] __attribute__((section(".modinfo"))) = \
++static const char __module_license[] __attribute_used__ __attribute__((section(".modinfo"))) = \
+ "license=" license
+
+ /* Define the module variable, and usage macros. */
+@@ -296,10 +297,10 @@ extern struct module __this_module;
+ #define MOD_IN_USE __MOD_IN_USE(THIS_MODULE)
+
+ #include <linux/version.h>
+-static const char __module_kernel_version[] __attribute__((section(".modinfo"))) =
++static const char __module_kernel_version[] __attribute_used__ __attribute__((section(".modinfo"))) =
+ "kernel_version=" UTS_RELEASE;
+ #ifdef MODVERSIONS
+-static const char __module_using_checksums[] __attribute__((section(".modinfo"))) =
++static const char __module_using_checksums[] __attribute_used__ __attribute__((section(".modinfo"))) =
+ "using_checksums=1";
+ #endif
+
+@@ -319,7 +320,7 @@ static const char __module_using_checksu
+ */
+ #define MODULE_GENERIC_TABLE(gtype,name) \
+ static const struct gtype##_id * __module_##gtype##_table \
+- __attribute__ ((unused, __section__(".data.exit"))) = name
++ __attribute_used__ __attribute__ ((__section__(".data.exit"))) = name
+
+ #ifndef __GENKSYMS__
+
--- /dev/null
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+--- linux-2.4.22/arch/arm/Makefile~nofpu 2004-09-08 19:34:11.000000000 -0500
++++ linux-2.4.22/arch/arm/Makefile 2004-09-08 20:03:34.000000000 -0500
+@@ -76,7 +76,7 @@
+
+ CFLAGS_BOOT :=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Uarm
+ CFLAGS +=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Uarm
+-AFLAGS +=$(apcs-y) $(arch-y) -mno-fpu -msoft-float
++AFLAGS +=$(apcs-y) $(arch-y) -msoft-float
+
+ ifeq ($(CONFIG_CPU_26),y)
+ PROCESSOR := armo
+--- linux-2.4.22/-~nofpu
++++ linux-2.4.22/-
--- /dev/null
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+--- linux-2.4.22/arch/arm/Makefile~short_loadbytes 2004-09-08 19:34:45.000000000 -0500
++++ linux-2.4.22/arch/arm/Makefile 2004-09-08 19:34:53.000000000 -0500
+@@ -74,8 +74,8 @@
+ tune-$(CONFIG_CPU_XSCALE) :=-mtune=strongarm
+ endif
+
+-CFLAGS_BOOT :=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Uarm
+-CFLAGS +=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Uarm
++CFLAGS_BOOT :=$(apcs-y) $(arch-y) $(tune-y) $(call check_gcc,-malignment-traps,-mshort-load-bytes) -msoft-float -Uarm
++CFLAGS +=$(apcs-y) $(arch-y) $(tune-y) $(call check_gcc,-malignment-traps,-mshort-load-bytes) -msoft-float -Uarm
+ AFLAGS +=$(apcs-y) $(arch-y) -msoft-float
+
+ ifeq ($(CONFIG_CPU_26),y)
SECTION = "kernel"
+DESCRIPTION = "Vendor-compatible Linux kernel for the Linksys NSLU2 device"
+LICENSE = "GPL"
+PR = "r17"
+
+COMPATIBLE_HOST = 'arm.*-linux'
COMPATIBLE_MACHINE = "nslu2"
-require nslu2-linksys-kernel_2.4.22.bb
+UNSLUNG_KERNEL_EXTRA_SRC_URI ?= ""
-DESCRIPTION = "Unslung kernel for the Linksys NSLU2 device"
-PR = "r17"
+SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.4/linux-2.4.22.tar.bz2 \
+ http://nslu.sf.net/downloads/xfs-2.4.22-all-i386.bz2;patch=1 \
+ http://nslu.sf.net/downloads/2.4.22-xfs-nslu2.patch.bz2;patch=1 \
+ file://config-fixes.patch;patch=1 \
+ file://nofpu.patch;patch=1 \
+ file://short_loadbytes.patch;patch=1 \
+ file://gcc3-userfuncs.patch;patch=1 \
+ file://gcc-registerparanoia.patch;patch=1 \
+ file://linux-2.4.24-attribute-used.patch;patch=1 \
+ file://double_cpdo.patch;patch=1 \
+ file://linux-kernel-R25_to_R29.patch;patch=1 \
+ file://linux-kernel-R29_to_R63.patch;patch=1 \
+ file://flash-is-now-hdd.patch;patch=1 \
+ file://gl811e.patch;patch=1 \
+ file://usbnet.patch;patch=1 \
+ file://missing-usb-ioctls.patch;patch=1 \
+ file://anonymiser.patch;patch=1 \
+ file://ppp_mppe.patch;patch=1 \
+ file://nfs-blocksize.patch;patch=1 \
+ file://pl2303.patch;patch=1 \
+ file://pl2303_mdmctl.patch;patch=1 \
+ file://netconsole.patch;patch=1 \
+ file://ppp_mppe_no_fp_in_kernel.patch;patch=1 \
+ file://defconfig \
+ ${UNSLUNG_KERNEL_EXTRA_SRC_URI}"
+S = "${WORKDIR}/linux-2.4.22"
-KERNEL_SUFFIX = "unslung"
+inherit kernel
+ARCH = "arm"
+KERNEL_IMAGETYPE = "zImage"
+KERNEL_SUFFIX = "unslung"
+CMDLINE_CONSOLE ?= "ttyS0,115200"
CMDLINE_ROOT = "root=/dev/mtdblock4 rootfstype=jffs2 rw init=/linuxrc mem=32M@0x00000000"
+CMDLINE = "${CMDLINE_CONSOLE} ${CMDLINE_ROOT}"
+
+do_configure_prepend() {
+ install -m 0644 ${WORKDIR}/defconfig ${S}/.config
+ echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config
+ rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \
+ ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch
+}
+
+do_deploy() {
+ install -d ${DEPLOY_DIR_IMAGE}
+ install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${KERNEL_SUFFIX}
+}
+
+do_deploy[dirs] = "${S}"
-UNSLUNG_KERNEL_EXTRA_SRC_URI ?=
-
-SRC_URI += "file://linux-kernel-R25_to_R29.patch;patch=1 \
- file://linux-kernel-R29_to_R63.patch;patch=1 \
- file://flash-is-now-hdd.patch;patch=1 \
- file://gl811e.patch;patch=1 \
- file://usbnet.patch;patch=1 \
- file://missing-usb-ioctls.patch;patch=1 \
- file://anonymiser.patch;patch=1 \
- file://ppp_mppe.patch;patch=1 \
- file://nfs-blocksize.patch;patch=1 \
- file://pl2303.patch;patch=1 \
- file://pl2303_mdmctl.patch;patch=1 \
- file://netconsole.patch;patch=1 \
- file://ppp_mppe_no_fp_in_kernel.patch;patch=1 \
- ${UNSLUNG_KERNEL_EXTRA_SRC_URI}"
-
-FILESPATH = "${@base_set_filespath([ '${FILE_DIRNAME}/unslung-kernel', '${FILE_DIRNAME}/nslu2-linksys-kernel-2.4.22', '${FILE_DIRNAME}/files', '${FILE_DIRNAME}' ], d)}"
+addtask deploy before do_build after do_compile
--- /dev/null
+DESCRIPTION = "LIRC is a package that allows you to decode and send infra-red signals of many commonly used remote controls. This package contains the lirc kernel modules."
+SECTION = "base"
+PRIORITY = "optional"
+HOMEPAGE = "http://www.lirc.org"
+LICENSE = "GPL"
+DEPENDS = "virtual/kernel fakeroot-native setserial"
+RDEPENDS_nslu2 = "setserial"
+PR = "r0"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/lirc/lirc-${PV}.tar.gz"
+S = "${WORKDIR}/lirc-${PV}"
+
+inherit autotools module
+
+require lirc-config.inc
+
+MAKE_TARGETS = "KERNEL_PATH=${STAGING_KERNEL_DIR} MAKE='make -e' -C drivers"
+
+fakeroot do_install() {
+ oe_runmake -C drivers DESTDIR="${D}" moduledir="/lib/modules/${KERNEL_VERSION}/lirc" install
+ rm -rf ${D}/dev
+}
+
+# nslu2 uses udev, so /dev/lirc0 will be created automatically
+# and /dev/lirc will be created by /etc/udev/rules.d/lirc.rules
+# (that's the kernel-2.6+udev solution)
+do_install_append_nslu2() {
+ install -d ${D}${sysconfdir}/modutils/
+ echo 'lirc_serial' > ${D}${sysconfdir}/modutils/lirc_serial
+ install -d ${D}${sysconfdir}/modprobe.d/
+ echo 'install lirc_serial /bin/setserial /dev/ttyS1 uart none; /sbin/leds ready on; /sbin/modprobe --ignore-install lirc_serial' >${D}${sysconfdir}/modprobe.d/lirc_serial
+ install -d ${D}${sysconfdir}/udev/rules.d/
+ echo 'KERNEL="lirc0", SYMLINK="lirc"' > ${D}${sysconfdir}/udev/rules.d/lirc.rules
+}
+
+# this is for distributions that don't use udev
+pkg_postinst_append() {
+if [ ! -c $D/dev/lirc -a ! -f /sbin/udevd ]; then mknod $D/dev/lirc c 61 0; fi
+}
+
+FILES_${PN} = "/lib/modules"
+FILES_${PN}_append_nslu2 = " ${sysconfdir}/modutils ${sysconfdir}/modprobe.d ${sysconfdir}/udev/rules.d"
+++ /dev/null
-require m4_${PV}.bb
-
-inherit native
-
-FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/m4"
-
-INHIBIT_AUTOTOOLS_DEPS = "1"
-DEPENDS += "gnu-config-native"
-
-do_configure() {
- install -m 0644 ${STAGING_DATADIR}/gnu-config/config.sub .
- install -m 0644 ${STAGING_DATADIR}/gnu-config/config.guess .
- oe_runconf
-}
-
-do_stage() {
- install -m 0755 src/m4 ${STAGING_BINDIR}/
-}
-
--- /dev/null
+require m4_${PV}.bb
+
+inherit native
+
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/m4"
+
+INHIBIT_AUTOTOOLS_DEPS = "1"
+DEPENDS += "gnu-config-native"
+
+do_configure() {
+ install -m 0644 ${STAGING_DATADIR}/gnu-config/config.sub .
+ install -m 0644 ${STAGING_DATADIR}/gnu-config/config.guess .
+ oe_runconf
+}
+
+do_stage() {
+ install -m 0755 src/m4 ${STAGING_BINDIR}/
+}
+
+++ /dev/null
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- m4-1.4.2/doc/Makefile.in~make
-+++ m4-1.4.2/doc/Makefile.in
-@@ -57,9 +57,9 @@
- date > $(srcdir)/stamp-vti
-
- install: all
-- $(srcdir)/../mkinstalldirs $(infodir)
-+ $(srcdir)/../mkinstalldirs $(DESTDIR)$(infodir)
- cd $(srcdir) && for file in m4.info*; do \
-- $(INSTALL_DATA) $$file $(infodir)/$$file; \
-+ $(INSTALL_DATA) $$file $(DESTDIR)$(infodir)/$$file; \
- done
-
- uninstall:
---- m4-1.4.2/src/Makefile.in~make
-+++ m4-1.4.2/src/Makefile.in
-@@ -35,7 +35,7 @@
- prefix = @prefix@
- exec_prefix = @exec_prefix@
- transform = @program_transform_name@
--bindir = $(exec_prefix)/bin
-+bindir = @bindir@
-
- COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
- LINK = $(CC) $(LDFLAGS) -o $@
-@@ -84,8 +84,8 @@
- $(LINK) ansi2knr.o $(LIBS)
-
- install: all
-- $(srcdir)/../mkinstalldirs $(bindir)
-- $(INSTALL_PROGRAM) m4 $(bindir)/`echo m4 | sed '$(transform)'`
-+ $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir)
-+ $(INSTALL_PROGRAM) m4 $(DESTDIR)$(bindir)/`echo m4 | sed '$(transform)'`
-
- uninstall:
- rm -f $(bindir)/`echo m4 | sed '$(transform)'`
+++ /dev/null
-DESCRIPTION = "GNU m4 is an implementation of the traditional Unix macro \
-processor."
-LICENSE = "GPL"
-SRC_URI = "${GNU_MIRROR}/m4/m4-${PV}.tar.gz \
- file://make.patch;patch=1"
-S = "${WORKDIR}/m4-${PV}"
-
-inherit autotools
-
-EXTRA_AUTORECONF = "--exclude=autopoint,aclocal"
-EXTRA_OEMAKE += "'infodir=${infodir}'"
--- /dev/null
+DESCRIPTION = "GNU m4 is an implementation of the traditional Unix macro \
+processor."
+LICENSE = "GPL"
+SRC_URI = "${GNU_MIRROR}/m4/m4-${PV}.tar.gz"
+S = "${WORKDIR}/m4-${PV}"
+
+inherit autotools
+
+EXTRA_AUTORECONF = "--exclude=autopoint,aclocal"
+EXTRA_OEMAKE += "'infodir=${infodir}'"
---- madwifi-ng/hal/public/xscale-be-elf.inc~ 2006-02-11 22:34:39.000000000 +1030
-+++ madwifi-ng/hal/public/xscale-be-elf.inc 2006-04-12 06:10:47.736463272 +0930
+Index: madwifi-ng-r1871-20061229/hal/public/xscale-be-elf.inc
+===================================================================
+--- madwifi-ng-r1871-20061229.orig/hal/public/xscale-be-elf.inc 2006-09-14 08:21:22.000000000 +0200
++++ madwifi-ng-r1871-20061229/hal/public/xscale-be-elf.inc 2007-01-24 22:37:23.000000000 +0100
@@ -77,5 +77,5 @@
LDOPTS= -EB
COPTS+= -DAH_BYTE_ORDER=AH_BIG_ENDIAN
-COPTS+= -march=armv4 -mbig-endian -fno-strict-aliasing -fno-common -mapcs-32 \
-- -mtune=xscale -mshort-load-bytes -msoft-float -mfp=2
+- -mtune=xscale -mshort-load-bytes
+COPTS+= -march=armv4 -mbig-endian -fno-strict-aliasing -fno-common \
+ -mtune=xscale -msoft-float -mfp=2
---- madwifi-ng/hal/public/xscale-le-elf.inc~ 2006-04-12 06:09:56.669226672 +0930
-+++ madwifi-ng/hal/public/xscale-le-elf.inc 2006-04-12 05:52:11.658132968 +0930
+Index: madwifi-ng-r1871-20061229/hal/public/xscale-le-elf.inc
+===================================================================
+--- madwifi-ng-r1871-20061229.orig/hal/public/xscale-le-elf.inc 2006-09-14 08:21:22.000000000 +0200
++++ madwifi-ng-r1871-20061229/hal/public/xscale-le-elf.inc 2007-01-24 22:42:38.000000000 +0100
@@ -79,4 +79,4 @@
LDOPTS= -EL
COPTS+= -DAH_BYTE_ORDER=AH_LITTLE_ENDIAN
COPTS+= -march=armv4 -mlittle-endian -fno-strict-aliasing -fno-common \
-- -mapcs-32 -mtune=xscale -mshort-load-bytes -msoft-float -mfp=2
+- -mapcs-32 -mtune=xscale -mshort-load-bytes
+ -mtune=xscale -msoft-float -mfp=2
EXTRA_OEMAKE = "LDFLAGS= KERNELPATH=${STAGING_KERNEL_DIR} KERNELRELEASE=${KERNEL_VERSION} TOOLPREFIX=${TARGET_PREFIX}"
-EXTRA_OEMAKE_prepend_slugos = "TARGET=xscale-${ARCH_BYTE_SEX}-elf "
+EXTRA_OEMAKE_prepend_ixp4xxle = "TARGET=xscale-le-elf "
+EXTRA_OEMAKE_prepend_ixp4xxbe = "TARGET=xscale-be-elf "
do_compile() {
oe_runmake all
DESCRIPTION = "MediaTomb - UPnP AV MediaServer for Linux"
HOMEPAGE = "http://mediatomb.org/"
LICENSE = "GPLv2"
-DEPENDS = "sqlite3 libexif js zlib file taglib"
+DEPENDS = "sqlite3 libexif js zlib file id3lib"
PV = "0.8+0.9pre1+svn${SRCDATE}-sqlite"
PR = "r1"
+++ /dev/null
---- mesa/Make-config.orig 2004-06-25 13:09:44.000000000 +0100
-+++ mesa/Make-config 2004-06-25 14:18:27.000000000 +0100
-@@ -643,16 +643,16 @@
- "GLUT_LIB = libglut.so" \
- "GLW_LIB = libGLw.so" \
- "OSMESA_LIB = libOSMesa.so" \
-- "CC = gcc" \
-- "CXX = g++" \
-- "CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include" \
-- "CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE" \
-+ "CC = $(CC)" \
-+ "CXX = $(CXX)" \
-+ "CFLAGS = -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS $(CFLAGS)" \
-+ "CXXFLAGS = -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE $(CXXFLAGS)" \
- "GLUT_CFLAGS = -fexceptions" \
-- "GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread" \
-+ "GL_LIB_DEPS = $(LDFLAGS) -lX11 -lXext -lm -lpthread" \
- "OSMESA_LIB_DEPS = -L$(TOP)/lib -lGL" \
- "GLU_LIB_DEPS = -L$(TOP)/lib -lGL -lm" \
-- "GLUT_LIB_DEPS = -L$(TOP)/lib -lGLU -lGL -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm" \
-- "GLW_LIB_DEPS = -L$(TOP)/lib -lGL -L/usr/X11R6/lib -lXt -lX11" \
-+ "GLUT_LIB_DEPS = $(LDFLAGS) -L$(TOP)/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm" \
-+ "GLW_LIB_DEPS = $(LDFLAGS) -L$(TOP)/lib -lGL -lXt -lX11" \
- "APP_LIB_DEPS = -lglut -lGLU -lGL -lm"
-
- linux-static:
--- /dev/null
+--- mesa/Make-config.orig 2004-06-25 13:09:44.000000000 +0100
++++ mesa/Make-config 2004-06-25 14:18:27.000000000 +0100
+@@ -643,16 +643,16 @@
+ "GLUT_LIB = libglut.so" \
+ "GLW_LIB = libGLw.so" \
+ "OSMESA_LIB = libOSMesa.so" \
+- "CC = gcc" \
+- "CXX = g++" \
+- "CFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS -I/usr/X11R6/include" \
+- "CXXFLAGS = -O3 -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE" \
++ "CC = $(CC)" \
++ "CXX = $(CXX)" \
++ "CFLAGS = -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -DUSE_XSHM -DPTHREADS $(CFLAGS)" \
++ "CXXFLAGS = -ansi -pedantic -fPIC -ffast-math -D_POSIX_SOURCE -D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE $(CXXFLAGS)" \
+ "GLUT_CFLAGS = -fexceptions" \
+- "GL_LIB_DEPS = -L/usr/X11R6/lib -lX11 -lXext -lm -lpthread" \
++ "GL_LIB_DEPS = $(LDFLAGS) -lX11 -lXext -lm -lpthread" \
+ "OSMESA_LIB_DEPS = -L$(TOP)/lib -lGL" \
+ "GLU_LIB_DEPS = -L$(TOP)/lib -lGL -lm" \
+- "GLUT_LIB_DEPS = -L$(TOP)/lib -lGLU -lGL -L/usr/X11R6/lib -lX11 -lXmu -lXt -lXi -lm" \
+- "GLW_LIB_DEPS = -L$(TOP)/lib -lGL -L/usr/X11R6/lib -lXt -lX11" \
++ "GLUT_LIB_DEPS = $(LDFLAGS) -L$(TOP)/lib -lGLU -lGL -lX11 -lXmu -lXt -lXi -lm" \
++ "GLW_LIB_DEPS = $(LDFLAGS) -L$(TOP)/lib -lGL -lXt -lX11" \
+ "APP_LIB_DEPS = -lglut -lGLU -lGL -lm"
+
+ linux-static:
--- /dev/null
+--- mesa/bin/mklib.old 2004-06-25 14:08:41.000000000 +0100
++++ mesa/bin/mklib 2004-06-25 14:23:09.000000000 +0100
+@@ -64,6 +64,7 @@
+ '-install') shift 1; INSTALLDIR=$1;;
+ '-arch') shift 1; ARCH=$1;;
+ '-archopt') shift 1; ARCHOPT=$1;;
++ -Wl*) DEPS="$DEPS $1";;
+ -*) echo "mklib: Unknown option: " $1 ; exit 1;;
+ *) break
+ esac
+@@ -137,9 +138,9 @@
+ echo "mklib: Making" $ARCH "shared library: " ${LIBNAME}.so.${VERSION}
+
+ if [ $CPLUSPLUS = 1 ] ; then
+- LINK="g++"
++ LINK="$CXX"
+ else
+- LINK="gcc"
++ LINK="$CC"
+ fi
+
+ # rm any old libs
--- /dev/null
+--- Mesa/bin/mklib.orig 2006-06-04 20:56:22.000000000 -0600
++++ Mesa/bin/mklib 2006-06-04 20:57:04.000000000 -0600
+@@ -98,6 +98,9 @@
+ -L*)
+ DEPS="$DEPS $1"
+ ;;
++ -Wl*)
++ DEPS="$DEPS $1"
++ ;;
+ '-cplusplus')
+ CPLUSPLUS=1
+ ;;
+--- Mesa-6.5.2/configs/default.old 2007-01-26 11:49:32.000000000 +0000
++++ Mesa-6.5.2/configs/default 2007-01-26 11:49:49.000000000 +0000
+@@ -73,7 +73,7 @@
+ GLU_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) -lm
+ GLUT_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLU_LIB) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lX11 -lXmu -lXt -lXi -lm
+ GLW_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GL_LIB) $(EXTRA_LIB_PATH) -lXt -lX11
+-APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
++APP_LIB_DEPS = -L$(TOP)/$(LIB_DIR) $(EXTRA_LIB_PATH) -l$(GLUT_LIB) -l$(GLU_LIB) -l$(GL_LIB) -lm
+
+
+
--- /dev/null
+SECTION = "x11"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/mesa3d/MesaLib-${PV}.tar.bz2 \
+ file://mklib-rpath-link.patch;patch=1"
+S = "${WORKDIR}/Mesa-${PV}"
+
+LICENSE = "LGPL"
+
+DEPENDS = "makedepend-native xf86vidmodeproto glproto virtual/libx11 libxext libxxf86vm libxi libxmu libice"
--- /dev/null
+include mesa-common.inc
+
+FILESPATH = "${FILE_DIRNAME}/mesa-${PV}:${FILE_DIRNAME}/files:${FILE_DIRNAME}"
+
+PACKAGES_DYNAMIC = "mesa-dri-driver-*"
+
+PR = "r0"
+
+DEPENDS += "libdrm"
+
+do_configure() {
+ cd configs
+
+ ln -sf linux-dri current
+ sed -e "s%CC *= *.*%CC = ${CC}%" -i current
+ sed -e "s%CXX *= *.*%CXX = ${CXX}%" -i current
+ sed -e "s%LD *= *.*%LD = ${LD}%" -i current
+ sed -e "s%OPT_FLAGS *= *.*%OPT_FLAGS = ${TARGET_CFLAGS}%" -i current
+ sed -e "s%X11_INCLUDES *= *.*%X11_INCLUDES = -I${STAGING_INCDIR}/X11%" -i current
+ sed -e "s%EXTRA_LIB_PATH *= *.*%EXTRA_LIB_PATH = ${LDFLAGS}%" -i current
+ sed -i s:\$\(CC\):gcc:g ../src/mesa/x86/Makefile
+ echo "SRC_DIRS = mesa" >> current
+ echo "DRI_DRIVER_INSTALL_DIR = ${D}${libdir}/dri" >> current
+}
+
+do_install() {
+ oe_runmake -C src/mesa/drivers/dri install
+}
+
+FILES_${PN}-dbg += "${libdir}/dri/.debug"
+
+python populate_packages_prepend () {
+ import re, os.path
+
+ do_split_packages(d, root=bb.data.expand('${libdir}/dri', d), file_regex='(.*)_dri\.so', output_pattern='mesa-dri-driver-%s', description='%s DRI driver')
+}
+
--- /dev/null
+include mesa-common.inc
+
+PACKAGES =+ "libglu libglu-dev libosmesa libosmesa-dev libgl libgl-dev"
+
+FILES_libgl = "${libdir}/libGL.so.*"
+FILES_libglu = "${libdir}/libGLU.so.*"
+FILES_libosmesa = "${libdir}/libOSMesa.so.*"
+
+FILES_libgl-dev = "${libdir}/libGL.* ${includedir}/GL"
+FILES_libglu-dev = "${libdir}/libGLU.* ${includedir}/GL/glu*.h"
+FILES_libosmesa-dev = "${libdir}/libOSMesa.* ${includedir}/osmesa.h"
+
+do_configure() {
+ cd configs
+
+ ln -sf linux current
+ sed -e "s%CC *= *.*%CC = ${CC}%" -i current
+ sed -e "s%CXX *= *.*%CXX = ${CXX}%" -i current
+ sed -e "s%LD *= *.*%LD = ${LD}%" -i current
+ sed -e "s%OPT_FLAGS *= *.*%OPT_FLAGS = ${TARGET_CFLAGS}%" -i current
+ sed -e "s%X11_INCLUDES *= *.*%X11_INCLUDES = -I${STAGING_INCDIR}/X11%" -i current
+ sed -e "s%EXTRA_LIB_PATH *= *.*%EXTRA_LIB_PATH = ${LDFLAGS}%" -i current
+ sed -i s:\$\(CC\):gcc:g ../src/mesa/x86/Makefile
+ echo "SRC_DIRS = mesa glu glut/glx" >> current
+}
+
+do_compile() {
+ oe_runmake default
+}
+
+do_install() {
+ install -d ${D}${libdir}
+ cp -pP lib/* ${D}${libdir}/
+ install -d ${D}${includedir}
+ cp -R include/GL ${D}${includedir}/
+}
+
+do_stage() {
+ cp -pP lib/* ${STAGING_LIBDIR}/
+ cp -R include/GL ${STAGING_INCDIR}/
+}
--- /dev/null
+PR = "r0"
+
+include mesa-mesa.inc
+++ /dev/null
---- mesa/bin/mklib.old 2004-06-25 14:08:41.000000000 +0100
-+++ mesa/bin/mklib 2004-06-25 14:23:09.000000000 +0100
-@@ -64,6 +64,7 @@
- '-install') shift 1; INSTALLDIR=$1;;
- '-arch') shift 1; ARCH=$1;;
- '-archopt') shift 1; ARCHOPT=$1;;
-+ -Wl*) DEPS="$DEPS $1";;
- -*) echo "mklib: Unknown option: " $1 ; exit 1;;
- *) break
- esac
-@@ -137,9 +138,9 @@
- echo "mklib: Making" $ARCH "shared library: " ${LIBNAME}.so.${VERSION}
-
- if [ $CPLUSPLUS = 1 ] ; then
-- LINK="g++"
-+ LINK="$CXX"
- else
-- LINK="gcc"
-+ LINK="$CC"
- fi
-
- # rm any old libs
--- /dev/null
+DESCRIPTION = "glurp - frontend for mpd"
+HOMEPAGE = "http://www.musicpd.org/glurp.shtml"
+LICENSE = "GPLv2"
+SECTION = "gnome/multimedia"
+DEPENDS = "gtk+ libglade"
+PR = "r0"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/glurp/glurp-${PV}.tar.gz"
+
+LDFLAGS += "-export-dynamic"
+
+inherit autotools
+++ /dev/null
-DESCRIPTION = "glurp - frontend for mpd"
-HOMEPAGE = "http://www.musicpd.org/glurp.shtml"
-LICENSE = "GPLv2"
-SECTION = "gnome/multimedia"
-DEPENDS = "gtk+ libglade"
-PR = "r0"
-
-SRC_URI = "${SOURCEFORGE_MIRROR}/glurp/glurp-${PV}.tar.gz"
-
-LDFLAGS += "-export-dynamic"
-
-inherit autotools
--- /dev/null
+DESCRIPTION = "GTK+ Frontend for mpd"
+HOMEPAGE = "http://www.musicpd.org/gmpc.shtml"
+LICENSE = "GPLv2"
+SECTION = "gnome/multimedia"
+DEPENDS = "libmpd gtk+ libglade gnome-vfs"
+PR = "r0"
+
+SRC_URI = "http://download.qballcow.nl/programs/gmpc-0.13/gmpc-${PV}.tar.gz"
+
+LDFLAGS += "-export-dynamic"
+
+inherit autotools
--- /dev/null
+DESCRIPTION = "GTK+ Frontend for mpd"
+HOMEPAGE = "http://www.musicpd.org/gmpc.shtml"
+LICENSE = "GPLv2"
+SECTION = "gnome/multimedia"
+DEPENDS = "libmpd gtk+ libglade gnome-vfs gob2"
+SRCDATE = "20070120"
+PV = "0.13.0+svn${SRCDATE}"
+PR = "r0"
+
+SRC_URI = "svn://svn.musicpd.org/gmpc;module=trunk;proto=https"
+S = "${WORKDIR}/trunk"
+
+LDFLAGS += "-export-dynamic"
+
+inherit autotools
--- /dev/null
+DESCRIPTION = "Music Player Daemon (mpd) library"
+HOMEPAGE = "http://www.musicpd.org"
+LICENSE = "GPLv2"
+SECTION = "lib/multimedia"
+SRCDATE = "20070120"
+PV = "0.0.0+svn${SRCDATE}"
+PR = "r0"
+
+SRC_URI = "svn://svn.musicpd.org/libmpd;module=trunk;proto=https"
+S = "${WORKDIR}/trunk"
+
+inherit autotools pkgconfig
+
+do_stage_append() {
+ oe_libinstall -C src libmpd ${STAGING_LIBDIR}
+ install -d ${STAGING_INCDIR}/libmpd
+ cd src
+ for i in *.h; do
+ install -m 0644 $i ${STAGING_INCDIR}/libmpd/$i
+ done
+ cd ..
+}
--- /dev/null
+Index: mpd/src/inputPlugins/mod_plugin.c
+===================================================================
+--- mpd.orig/src/inputPlugins/mod_plugin.c
++++ mpd/src/inputPlugins/mod_plugin.c
+@@ -62,10 +62,16 @@ static MDRIVER drv_mpd = {
+ NULL,
+ "MPD",
+ "MPD Output Driver v0.1",
++
+ 0,
+ 255,
+- "mpd",
+- NULL,
++#if (LIBMIKMOD_VERSION > 0x030106)
++ "mpd", /* alias */
++ NULL, /* cmd help line*/
++#endif
++#if (LIBMIKMOD_VERSION >= 0x030200)
++ NULL, /*Command Line */
++#endif
+ mod_mpd_IsThere,
+ VC_SampleLoad,
+ VC_SampleUnload,
--- /dev/null
+DESCRIPTION = "Music Player Daemon (mpd)"
+HOMEPAGE = "http://www.musicpd.org"
+LICENSE = "GPLv2"
+SECTION = "console/multimedia"
+DEPENDS = "libvorbis libogg libid3tag libao zlib libmikmod libmad flac audiofile virtual/libiconv faad2 pulseaudio"
+SRCDATE = "20070120"
+PV = "0.12.1+svn${SRCDATE}"
+PR = "r2"
+
+SRC_URI = "svn://svn.musicpd.org/mpd;module=trunk;proto=https \
+ file://fix-mod-support.patch;patch=1"
+# file://save-volume-state.patch;patch=1"
+S = "${WORKDIR}/trunk"
+
+inherit autotools
+
+# Setting --enable-mpd-{mad,id3tag} causes local caches of the libraries to
+# be built, instead we use the OE built versions which should be installed
+# in staging - remove the --with and replace with --enable to use the local
+# versions.
+
+EXTRA_OECONF = "--enable-ogg \
+ --with-id3tag-libraries=${STAGING_LIBDIR} \
+ --with-id3tag-includes=${STAGING_INCDIR} \
+ --with-mad-libraries=${STAGING_LIBDIR} \
+ --with-mad-includes=${STAGING_INCDIR} \
+ --with-faad-libraries=${STAGING_LIBDIR} \
+ --with-faad-includes=${STAGING_INCDIR} \
+ --disable-jack \
+ --enable-pulse \
+ --enable-mod \
+ --disable-oggflac"
+
+do_compile_prepend() {
+ find -name Makefile | xargs sed -i 's~-I/usr/include~-I${STAGING_INCDIR}~g'
+}
--- /dev/null
+DESCRIPTION = "Python library for Music Player Daemon (mpd)"
+HOMEPAGE = "http://www.musicpd.org/py-libmpdclient.shtml"
+LICENSE = "GPLv2"
+SECTION = "lib/multimedia"
+DEPENDS = "libmpd python"
+PR = "r0"
+
+SRC_URI = "http://mercury.chem.pitt.edu/~shank/py-libmpdclient-${PV}.tar.gz"
+
+inherit distutils
-PV = "1.9"
+PV = "1.10"
PR = "r0"
RDEPENDS_${PN} = "font-misc-misc"
cd /var/lib/config
for fn in $files; do
- if ! tftp -g $serverid -r $bootdir/mythfront/$ip/$fn -l $fn; then
- if ! tftp -g $serverid -r $bootdir/mythfront/default/$fn -l $fn; then
+ if ! tftp -g $siaddr -r $bootdir/mythfront/$ip/$fn -l $fn; then
+ if ! tftp -g $siaddr -r $bootdir/mythfront/default/$fn -l $fn; then
rm -f $fn
fi
fi
--- /dev/null
+DESCRIPTION = "A full featured personal video recorder system."
+HOMEPAGE = "http://www.mythtv.org"
+LICENSE = "GPL"
+SECTION = "x11/multimedia"
+DEPENDS = "libxinerama lame libxv libxxf86vm libxvmc lirc qt-x11-free"
+RDEPENDS_${PN} = "qt-x11-plugins-sqldrivers qt-x11-plugins-imageformats"
+
+SRC_URI = "http://www.mythtv.org/mc/mythtv-${PV}.tar.bz2"
+
+inherit qmake qt3x11
+
+# there is a -march=586 somewhere in the source tree
+COMPATIBLE_HOST = 'i.86.*-linux'
+
+QMAKE_PROFILES = "mythtv.pro"
+
+def mythtv_arch(d):
+ import bb, re
+ arch = bb.data.getVar('TARGET_ARCH', d, 1)
+ if re.match("^i.86$", arch):
+ arch = "x86"
+ elif arch == "x86_64":
+ arch = "x86"
+ elif arch == "arm":
+ arch = "armv4l"
+ return arch
+
+MYTHTV_ARCH := "${@mythtv_arch(d)}"
+
+do_install() {
+ oe_runmake INSTALL_ROOT=${D} install
+}
-DESCRIPTION = "A full featured personal video recorder system."
-HOMEPAGE = "http://www.mythtv.org"
-LICENSE = "GPL"
-SECTION = "x11/multimedia"
-DEPENDS = "libxinerama lame libxv libxxf86vm libxvmc lirc qt-x11-free"
-RDEPENDS = "qt-x11-plugins-sqldrivers qt-x11-plugins-imageformats"
-PR = "r1"
-
-SRC_URI = "http://www.mythtv.org/mc/mythtv-${PV}.tar.bz2 \
- file://msmpeg-underscore-pic.patch;patch=1 \
- file://settings.pro"
-
-inherit qmake qt3x11
-
-# there is a -march=586 somewhere in the source tree
-COMPATIBLE_HOST = 'i.86.*-linux'
+require mythtv.inc
-QMAKE_PROFILES = "mythtv.pro"
+PR = "r1"
-def mythtv_arch(d):
- import bb, re
- arch = bb.data.getVar('TARGET_ARCH', d, 1)
- if re.match("^i.86$", arch):
- arch = "x86"
- elif arch == "x86_64":
- arch = "x86"
- elif arch == "arm":
- arch = "armv4l"
- return arch
+SRC_URI += "file://msmpeg-underscore-pic.patch;patch=1 \
+ file://settings.pro"
-MYTHTV_ARCH := "${@mythtv_arch(d)}"
do_configure_prepend() {
# it's not autotools anyway, so we call ./configure directly
sed 's!PREFIX =.*!PREFIX = ${prefix}!' < settings.pro > settings.pro.new
mv settings.pro.new settings.pro
}
-
-do_install() {
- oe_runmake INSTALL_ROOT=${D} install
-}
-
-DESCRIPTION = "A full featured personal video recorder system."
-HOMEPAGE = "http://www.mythtv.org"
-LICENSE = "GPL"
-SECTION = "x11/multimedia"
-DEPENDS = "libxinerama lame libxv libxxf86vm libxvmc lirc qt-x11-free openchrome"
-PR = "r0"
+require mythtv.inc
-SRC_URI = "http://www.mythtv.org/mc/mythtv-${PV}.tar.bz2 \
- file://configure.patch;patch=1 \
- file://libmyth-libdir.patch;patch=1"
+DEPENDS += "openchrome"
+PR = "r0"
-inherit qmake qt3x11
+SRC_URI += "file://configure.patch;patch=1 \
+ file://libmyth-libdir.patch;patch=1"
-# there is a -march=586 somewhere in the source tree
-COMPATIBLE_HOST = 'i.86.*-linux'
+# Seen on the mythtv web page:
+# http://www.mythtv.org/mc/fix-mythweb-in-0.20.diff;patch=1
QMAKE_PROFILES = "mythtv.pro"
RDEPENDS_${PN} = "mythtv-backend mythtv-frontend mythtv-bin mythtv-filters mythtv-data"
ALLOW_EMPTY_${PN} = "1"
+PACKAGES_DYNAMIC = "mythtv-theme-*"
+
python __anonymous () {
import bb
bb.data.setVar("PACKAGES", packages, d)
}
-
-def mythtv_arch(d):
- import bb, re
- arch = bb.data.getVar('TARGET_ARCH', d, 1)
- if re.match("^i.86$", arch):
- arch = "x86"
- elif arch == "x86_64":
- arch = "x86"
- elif arch == "arm":
- arch = "armv4l"
- return arch
-
-MYTHTV_ARCH := "${@mythtv_arch(d)}"
-
do_configure_prepend() {
# it's not autotools anyway, so we call ./configure directly
find . -name "Makefile"|xargs rm -f
mv settings.pro.new settings.pro
}
-do_install() {
- oe_runmake INSTALL_ROOT=${D} install
-}
-
python populate_packages_prepend () {
new_packages = []
--- /dev/null
+# Standard definitions for any NSLU2 Linux kernel.
+# Include this file in a .bb which specifies, at least,
+# PN,PV,PR for the desired kernel
+#
+# Define the following *before* including this file as
+# required:
+#
+# N2K_PATCHES - full list of patches to apply, to add files
+# generate a patch against /dev/null
+# N2K_SUFFIX - the suffix to add after 'zImage-' in the
+# deploy/images directory, should identify the image config
+#
+# DEFAULT_PREFERENCE is set automagically in this file as
+# follows:
+#
+# 10 For *released* kernels
+# 8 For mm or ac patched versions of released kernels
+# 6 For rc patched kernels (release candidates)
+# 4 For mm or ac patched rc (release candidate) kernels
+# 2 For pre or bk versions
+# 0 For mm or ac patched pre or bk versions
+#
+# --------------------------------------------------------------
+#
+# Within this file bitbake variables local to the file are
+# named N2K_FOO
+#
+SECTION = "kernel"
+DESCRIPTION = "Linux kernel for the Linksys NSLU2 device"
+LICENSE = "GPL"
+
+DEPENDS += "devio-native"
+
+# Linux kernel source has the general form linux-X.Y.Z-patchP,
+# X.Y is the major version number, Z (which may have multiple
+# parts) is a sub-version and 'patch' is something like 'mm' or
+# 'ac' with a patch version. The original bz2 archive will be
+# in a directory/file vX.Y/linux-X.Y.Z.tar.bz2. The unpacked
+# source will be in the directory linux-X.Y.Z and this directory
+# name corresponds to the module directory (in /lib/modules).
+#
+# The corresponding .bb file should be called:
+#
+# package_X.Y.Z-patchP
+#
+# Giving PN=package PV=X.Y.Z-patchP (and PR is set in the .bb
+# file). Files, including the all important defconfig, are
+# searched for in the following directories (last one first):
+#
+# nslu2-kernel/files
+# nslu2-kernel/X.Y
+# nslu2-kernel/X.Y.Z
+# nslu2-kernel/X.Y.Z-patch
+# nslu2-kernel/X.Y.Z-patchP
+# package-X.Y.Z-patchP
+#
+# This allows sharing of patch files and other useful source!
+# To share a file or patch with an earlier version put it in
+# the shared directory - e.g. to use foo.patch on 2.6.11.2 and
+# 2.6.11.4 it should be in directory nslu2-kernel/2.6.11.
+#
+# Note that when there are multiple patches the X.Y.Z-patch form
+# uses base-patch (e.g. 2.6.12-mm) whereas X.Y.Z-patchP has the
+# full form, for example 2.6.12-rc3-mm1 (in the same case).
+
+#PN=package-name
+#PV=package-version (full)
+
+# The patch has the general form (rcN|preN|acN|mmN|bkN)* with the
+# separate patch items being separated by '-' characters. The
+# rc patch is first and has the important property that it
+# requires the *preceding* kernel base version and that this
+# will be the source directory name.
+python () {
+ # The patches list may be empty. This code starts with the base
+ # kernel version and steps through the patches. Because the rc and
+ # pre patches actually require the *preceding* kernel version the code
+ # fixes that up appropriately.
+ pv = bb.data.getVar("PV",d,1).split('-')
+ kernel = pv[0].split('.')
+ base = pv[0]
+ name = [base]
+ major = '.'.join(name[0].split('.')[0:2])
+ minor = '.'.join(name[0].split('.')[0:3])
+ patch_uri = [ None ]
+ filedir = "${FILE_DIRNAME}/nslu2-kernel/%s"
+ # This entry will become the last one (everything is inserted before it)
+ filepath = [ filedir % "files" ]
+ pref = 10
+ mmac = 0
+ for patch in pv[1:]:
+ name.append(patch)
+ pname = '-'.join(name)
+ if patch[0:2] == "rc" or patch[0:3] == "pre":
+ patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/v%s/testing/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname))
+ kernel[-1] = str(int(kernel[-1]) - 1)
+ if patch[0:2] == "rc" and pref == 10:
+ pref = 6
+ filepath[0:0] = [ filedir % name[0] ]
+ filepath[0:0] = [ filedir % (name[0] + "-rc") ]
+ else:
+ pref = 2
+ elif patch[0:2] == "bk" or patch[0:3] == "git":
+ patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/v%s/snapshots/patch-%s.bz2;patch=1;pname=%s" % (major, pname, pname))
+ pref = 2
+ elif patch[0:2] == "ac":
+ patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/people/alan/linux-%s/%s/patch-%s" % (major, base, pname))
+ mmac = 2
+ filepath[0:0] = [ filedir % (name[0] + "-ac") ]
+ elif patch[0:2] == "mm":
+ patch_uri.append("${KERNELORG_MIRROR}/pub/linux/kernel/people/akpm/patches/%s/%s/%s/%s.bz2;patch=1;pname=%s" % (major, base, pname, pname, pname))
+ mmac = 2
+ filepath[0:0] = [ filedir % (name[0] + "-mm") ]
+ else:
+ raise bb.build.FuncFailed("nslu2-kernel: patch %s not recognized in %s" % (patch, '-'.join(pv)))
+ filepath[0:0] = [ filedir % pname ]
+ base = pname
+
+ base = '.'.join(kernel)
+ patch_uri[0] = "${KERNELORG_MIRROR}/pub/linux/kernel/v%s/linux-%s.tar.bz2" % (major, base)
+ filepath[-1:-1] = [ filedir % base ]
+ if base != minor:
+ filepath[-1:-1] = [ filedir % minor ]
+ filepath[-1:-1] = [ filedir % major ]
+
+ bb.data.setVar("N2K_SRCMAJ", major, d)
+ # bb.note("N2K_SRCMAJ := %s" % major)
+ bb.data.setVar("N2K_SRCVER", base, d)
+ # bb.note("N2K_SRCVER := %s" % base)
+ bb.data.setVar("N2K_SRCURI", ' '.join(patch_uri), d)
+ # bb.note("N2K_SRCURI := %s" % ' '.join(patch_uri))
+ bb.data.setVar("N2K_FILESPATH", ':'.join(filepath), d)
+ # bb.note("N2K_FILESPATH := %s" % ' '.join(filepath))
+ bb.data.setVar("DEFAULT_PREFERENCE", pref-mmac, d)
+ # bb.note("DEFAULT_PREFERENCE := %s" % (pref-mmac))
+}
+
+# FILESPATH: this list is in order last-searched-first, therefore
+# the first entry is the *latest* and/or most specific
+FILESPATH = "${FILE_DIRNAME}/${P}:${N2K_FILESPATH}"
+
+# The working directory will be the 'base' version (which may not be the
+# same as implied by the PV variable because it corresponds to the prior
+# minor version for rc and pre patched versions).
+S = "${WORKDIR}/linux-${N2K_SRCVER}"
+
+# N2K_PATCHES is the list of patches.
+N2K_PATCHES ?= ""
+
+# Image suffix - actually set in conf/machine/nslu2.conf as it is also
+# used by anything which needs to know the name of the generated image.
+# Should be overridden in the distro if patches or defconfig are changed.
+N2K_SUFFIX ?= "nslu2${SITEINFO_ENDIANESS}"
+
+SRC_URI = "${N2K_SRCURI}"
+SRC_URI += "${N2K_PATCHES}"
+SRC_URI += "file://defconfig"
+
+COMPATIBLE_HOST = 'arm.*-linux'
+
+inherit kernel
+
+ARCH = "arm"
+KERNEL_IMAGETYPE = "zImage"
+# To specify the console set KERNEL_CONSOLE in the .bb file.
+# CMDLINE_ROOT contains the boot options, CMDLINE_KERNEL_OPTIONS
+# contains the things for a specific kernel.
+CMDLINE_KERNEL_OPTIONS ?= "reboot=s"
+CMDLINE_ROOT ?= "root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc"
+# Add distro specific debug (or non-debug) options to this
+CMDLINE_DEBUG ?= ""
+CMDLINE = "${CMDLINE_ROOT} ${CMDLINE_KERNEL_OPTIONS} ${CMDLINE_DEBUG} ${CMDLINE_CONSOLE}"
+
+# Set EXTRAVERSION and LOCALVERSION to "" so that the kernel version
+# remains pinned to the x.y.z form, also turn off the directory
+# printing which provides almost all the output of an incremental build.
+EXTRA_OEMAKE += "EXTRAVERSION="
+EXTRA_OEMAKE += "LOCALVERSION="
+EXTRA_OEMAKE += "MAKEFLAGS='--no-print-directory'"
+
+addtask unpacklocal before do_patch after do_unpack
+
+# NOTE: in MM kernel builds the config options (oldconfig, menuconfig
+# and so on) do not allow an option to be overridden, so the following
+# removes the options which must be changed.
+do_configure_prepend() {
+ rm -f ${S}/.config
+ echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >>'${S}/.config'
+ if test '${SITEINFO_ENDIANESS}' = be
+ then
+ echo 'CONFIG_CPU_BIG_ENDIAN=y' >>'${S}/.config'
+ fi
+ if test '${SLUGOS_IMAGESEX}' = big-endian
+ then
+ echo 'CONFIG_JFFS2_BIG_ENDIAN=y' >>'${S}/.config'
+ fi
+ if test '${SLUGOS_IMAGESEX}' = little-endian
+ then
+ echo 'CONFIG_JFFS2_LITTLE_ENDIAN=y' >>'${S}/.config'
+ fi
+ sed -e '/CONFIG_CPU_BIG_ENDIAN/d' -e '/CONFIG_CMDLINE=/d' \
+ -e '/CONFIG_JFFS2_NATIVE_ENDIAN=/d' \
+ -e '/CONFIG_JFFS2_BIG_ENDIAN=/d' \
+ -e '/CONFIG_JFFS2_LITTLE_ENDIAN=/d' \
+ '${WORKDIR}/defconfig' >>'${S}/.config'
+ rm -rf ${S}/include/asm-arm/arch ${S}/include/asm-arm/proc \
+ ${S}/include/asm-arm/.proc ${S}/include/asm-arm/.arch
+}
+
+# This function adds the required prefix to the image to deal with two
+# problems:
+#
+# 1) The machine type set by RedBoot is wrong - the type for an ixdp425, not an NSLU2
+# e3a01c02 e3811055
+# 2) For LE kernels it is necessary to prefix change-to-le code to the kernel image:
+# ee110f10 e3c00080 ee010f10
+# and to byte swap the (LE) image to match the BE flash layout
+#
+# The argument to the function is the destination directory
+redboot_fixup_armeb() {
+ rm -f "$1".new
+ devio '<<arch/${ARCH}/boot/${KERNEL_IMAGETYPE}' >"$1".new \
+ 'wb 0xe3a01c02,4' \
+ 'wb 0xe3811055,4' \
+ 'cp$'
+ mv "$1".new "$1"
+}
+
+redboot_fixup_arm() {
+ rm -f "$1".new
+ devio '<<arch/${ARCH}/boot/${KERNEL_IMAGETYPE}' >"$1".new \
+ 'wb 0xe3a01c02,4' \
+ 'wb 0xe3811055,4' \
+ 'wb 0xee110f10,4' \
+ 'wb 0xe3c00080,4' \
+ 'wb 0xee010f10,4' \
+ 'xp $,4' || {
+ echo 'ERROR: arch/${ARCH}/boot/${KERNEL_IMAGETYPE}: failed to byteswap zImage' >&2
+ return 1
+ }
+ mv "$1".new "$1"
+}
+
+do_install_append() {
+ redboot_fixup '${STAGING_KERNEL_DIR}/${KERNEL_IMAGETYPE}'
+}
+
+do_deploy[dirs] = "${S}"
+do_deploy() {
+ install -d ${DEPLOY_DIR_IMAGE}
+ redboot_fixup '${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${N2K_SUFFIX}'
+}
+
+addtask deploy before do_build after do_compile
+
+COMPATIBLE_MACHINE = "nslu2"
--- /dev/null
+--- linux-2.6.11/arch/arm/kernel/setup.c.orig Mon Mar 7 09:41:40 2005
++++ linux-2.6.11/arch/arm/kernel/setup.c Mon Mar 7 09:42:15 2005
+@@ -431,8 +431,10 @@
+ rd_prompt = prompt;
+ rd_doload = doload;
+
++#if 0 /* rd_size is not exported by 2.6.11-mm1 */
+ if (rd_sz)
+ rd_size = rd_sz;
++#endif
+ #endif
+ }
+
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-mm4
+# Sat May 7 11:48:09 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_IOMAP=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+CONFIG_ARCH_IXP4XX=y
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+
+#
+# Intel IXP4xx Implementation Options
+#
+
+#
+# IXP4xx Platforms
+#
+# CONFIG_ARCH_AVILA is not set
+# CONFIG_ARCH_ADI_COYOTE is not set
+# CONFIG_ARCH_IXDP425 is not set
+# CONFIG_MACH_IXDPG425 is not set
+# CONFIG_MACH_IXDP465 is not set
+CONFIG_ARCH_NSLU2=y
+# CONFIG_ARCH_PRPMC1100 is not set
+# CONFIG_MACH_GTWX5715 is not set
+
+#
+# IXP4xx Options
+#
+CONFIG_IXP4XX_INDIRECT_PCI=y
+CONFIG_DMABOUNCE=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_MINICACHE=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMB_INTERWORK is not set
+# CONFIG_ARCH_XSCALE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_XSCALE_PMU=y
+
+#
+# General setup
+#
+CONFIG_PCI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_NAMES is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# At least one math emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_PM is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc console=ttyS0,115200n8"
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_IXP4XX=y
+# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PCI is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=10240
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=m
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_KGDBOE is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_ISCSI_IF is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_IXP4XX_WATCHDOG=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_RTC=m
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_IOP3XX is not set
+# CONFIG_I2C_ISA is not set
+CONFIG_I2C_IXP4XX=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Hardware Sensors Chip support
+#
+CONFIG_I2C_SENSOR=y
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+
+#
+# Other I2C Chip support
+#
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+CONFIG_SENSORS_X1205=y
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISER4_FS=m
+# CONFIG_REISER4_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_FS_NOR_ECC is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# Misc devices
+#
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+
+#
+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_RW_DETECT is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+
+#
+# USB Host-to-Host Cables
+#
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_GENESYS=y
+CONFIG_USB_NET1080=y
+CONFIG_USB_PL2301=y
+CONFIG_USB_KC2190=y
+
+#
+# Intelligent USB Devices/Gadgets
+#
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_ZAURUS=y
+CONFIG_USB_CDCETHER=y
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_AX8817X=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB ATM/DSL drivers
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
--- /dev/null
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/disk_format/disk_format40.c 2005-03-27 21:36:10.656270448 -0800
++++ linux-2.6.11/fs/reiser4/plugin/disk_format/disk_format40.c 2005-03-27 23:39:18.967076480 -0800
+@@ -467,19 +467,15 @@
+ return 0;
+ }
+
+-#define FORMAT40_ROOT_LOCALITY 41
+-#define FORMAT40_ROOT_OBJECTID 42
++#define FORMAT40_ROOT_LOCALITY 41ull
++#define FORMAT40_ROOT_OBJECTID 42ull
+
+ /* plugin->u.format.root_dir_key */
+ reiser4_internal const reiser4_key *
+ root_dir_key_format40(const struct super_block *super UNUSED_ARG)
+ {
+ static const reiser4_key FORMAT40_ROOT_DIR_KEY = {
+- .el = {{(FORMAT40_ROOT_LOCALITY << 4) | KEY_SD_MINOR},
+-#if REISER4_LARGE_KEY
+- {0ull},
+-#endif
+- {FORMAT40_ROOT_OBJECTID}, {0ull}}
++ .el = { KEY_INIT(KEY_SD_MINOR,FORMAT40_ROOT_LOCALITY,0ull,0,FORMAT40_ROOT_OBJECTID,0ull) }
+ };
+
+ return &FORMAT40_ROOT_DIR_KEY;
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/disk_format/disk_format40.h 2005-03-27 21:24:00.618253096 -0800
++++ linux-2.6.11/fs/reiser4/plugin/disk_format/disk_format40.h 2005-03-27 21:24:02.747929336 -0800
+@@ -49,7 +49,7 @@
+ /* 70 */ d16 formatting_policy;
+ /* 72 */ d64 flags;
+ /* 72 */ char not_used[432];
+-} format40_disk_super_block;
++} PACKED64 format40_disk_super_block;
+
+ /* format 40 specific part of reiser4_super_info_data */
+ typedef struct format40_super_info {
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/file/invert.c 2005-03-27 21:24:00.625252032 -0800
++++ linux-2.6.11/fs/reiser4/plugin/file/invert.c 2005-03-27 21:24:02.747929336 -0800
+@@ -240,14 +240,14 @@
+ typedef struct flow_header {
+ d32 fl_magic;
+ d16 fl_nr; /* number of subfiles in the flow */
+-};
++} PACKED32;
+
+ typedef struct subfile_header {
+ d32 sh_magic; /* subfile magic */
+ d16 sh_type; /* type of subfile: light-weight, ordinary, invert */
+ d16 sh_arg_len; /* lenght of lookup argument (filename, key) */
+ d32 sh_body_len; /* lenght of subfile body */
+-};
++} PACKED32;
+
+ /* functions to get/set fields of flow header */
+
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/static_stat.c 2005-03-27 21:24:00.648248536 -0800
++++ linux-2.6.11/fs/reiser4/plugin/item/static_stat.c 2005-03-27 21:34:27.331978128 -0800
+@@ -19,6 +19,38 @@
+
+ /* see static_stat.h for explanation */
+
++/* compile time verify of the data structure sizes and alignments */
++static inline void
++r4static_stat_verify(void)
++{
++ /* All these structures are PACKED, so the __alignof__ should
++ * be 1. The sizes need to be correct as they map to disk
++ * structures.
++ */
++ cassert(sizeof (reiser4_stat_data_base) == 2);
++ /* cassert(sizeof (reiser4_light_weight_stat) == 16);
++ * 14 bytes, comments in code do not take into account PACKED!
++ */
++ cassert(sizeof (reiser4_light_weight_stat) == 14);
++ cassert(sizeof (reiser4_unix_stat) == 28);
++ cassert(sizeof (reiser4_symlink_stat) == 0);
++ cassert(sizeof (reiser4_plugin_slot) == 4);
++ cassert(sizeof (reiser4_plugin_stat) == 2);
++ cassert(sizeof (reiser4_flags_stat) == 4);
++ /* cassert(sizeof (reiser4_capabilities_stat) == 16);
++ * comments in the file look wrong - capabilities are 2 x d32
++ * not 2 x d64 in the declaration.
++ */
++ cassert(sizeof (reiser4_capabilities_stat) == 8);
++ cassert(sizeof (reiser4_cluster_stat) == 1);
++ cassert(sizeof (reiser4_crypto_stat) == 2);
++ /* cassert(sizeof (reiser4_large_times_stat) == 24);
++ * should be 12 bytes - 3 x d32, probably a bug in the def in
++ * the header file (meant to be 3 x d64?)
++ */
++ cassert(sizeof (reiser4_large_times_stat) == 12);
++}
++
+ /* helper function used while we are dumping/loading inode/plugin state
+ to/from the stat-data. */
+
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/acl.h 2005-03-27 21:24:00.629251424 -0800
++++ linux-2.6.11/fs/reiser4/plugin/item/acl.h 2005-03-27 21:24:02.749929032 -0800
+@@ -26,7 +26,7 @@
+ obj_key_id id;
+ /* file name. Null terminated string. */
+ d8 name[0];
+-} directory_entry_format;
++} PACKEDt(obj_key_id) directory_entry_format;
+
+ void print_de(const char *prefix, coord_t * coord);
+ int extract_key_de(const coord_t * coord, reiser4_key * key);
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/cde.h 2005-03-27 21:24:00.632250968 -0800
++++ linux-2.6.11/fs/reiser4/plugin/item/cde.h 2005-03-27 21:24:02.750928880 -0800
+@@ -15,12 +15,12 @@
+ typedef struct cde_unit_header {
+ de_id hash;
+ d16 offset;
+-} cde_unit_header;
++} PACKEDt2(de_id,d16) cde_unit_header;
+
+ typedef struct cde_item_format {
+ d16 num_of_entries;
+ cde_unit_header entry[0];
+-} cde_item_format;
++} PACKEDt2(d16,cde_unit_header) cde_item_format;
+
+ typedef struct cde_entry {
+ const struct inode *dir;
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/extent.h 2005-03-27 21:32:13.758284416 -0800
++++ linux-2.6.11/fs/reiser4/plugin/item/extent.h 2005-03-27 21:32:30.786695704 -0800
+@@ -7,7 +7,7 @@
+ typedef struct {
+ reiser4_dblock_nr start;
+ reiser4_dblock_nr width;
+-} reiser4_extent;
++} PACKED64 reiser4_extent;
+
+ typedef struct extent_stat {
+ int unallocated_units;
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/internal.h 2005-03-27 21:33:08.971890672 -0800
++++ linux-2.6.11/fs/reiser4/plugin/item/internal.h 2005-03-27 22:15:43.290575208 -0800
+@@ -13,7 +13,7 @@
+ typedef struct internal_item_layout {
+ /* 0 */ reiser4_dblock_nr pointer;
+ /* 4 */
+-} internal_item_layout;
++} PACKED64 internal_item_layout;
+
+ struct cut_list;
+
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/item/sde.h 2005-03-27 21:24:00.646248840 -0800
++++ linux-2.6.11/fs/reiser4/plugin/item/sde.h 2005-03-27 21:24:02.750928880 -0800
+@@ -26,7 +26,7 @@
+ obj_key_id id;
+ /* file name. Null terminated string. */
+ d8 name[0];
+-} directory_entry_format;
++} PACKEDt(obj_key_id) directory_entry_format;
+
+ void print_de(const char *prefix, coord_t * coord);
+ int extract_key_de(const coord_t * coord, reiser4_key * key);
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/node/node40.c 2005-03-27 21:24:00.654247624 -0800
++++ linux-2.6.11/fs/reiser4/plugin/node/node40.c 2005-03-27 21:35:08.677692624 -0800
+@@ -32,6 +32,22 @@
+ magic (32)
+ flush_time (32)
+ */
++/* compile time verify of the data structure sizes and alignments */
++static inline void
++r4node40_stat_verify(void)
++{
++ /* The alignment of these structures is intended to be '1', but
++ * it doesn't matter so long as the size is right.
++ */
++ cassert(sizeof (common_node_header) == 2);
++ cassert(sizeof (node40_header) == 28);
++#if REISER4_LARGE_KEY
++ cassert(sizeof (item_header40) == 38);
++#else
++ cassert(sizeof (item_header40) == 30);
++#endif
++}
++
+ /* NIKITA-FIXME-HANS: I told you guys not less than 10 times to not call it r4fs. Change to "ReIs". */
+ /* magic number that is stored in ->magic field of node header */
+ static const __u32 REISER4_NODE_MAGIC = 0x52344653; /* (*(__u32 *)"R4FS"); */
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/plugin/node/node.h 2005-03-27 21:24:00.656247320 -0800
++++ linux-2.6.11/fs/reiser4/plugin/node/node.h 2005-03-27 21:24:02.753928424 -0800
+@@ -250,7 +250,7 @@
+ /* identifier of node plugin. Must be located at the very beginning
+ of a node. */
+ d16 plugin_id;
+-} common_node_header;
++} PACKED16 common_node_header;
+
+ /* __REISER4_NODE_H__ */
+ #endif
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/debug.c 2005-03-27 21:24:00.563261456 -0800
++++ linux-2.6.11/fs/reiser4/debug.c 2005-03-27 23:27:58.569512632 -0800
+@@ -75,6 +75,72 @@
+ va_list args;
+
+ /*
++ * this is here to make sure that we don't compile code which we
++ * know a-priori will panic, or fail without panicing, since this
++ * compiles first if you find a duplicate case label error then
++ * you need to rewrite this code to match your compiler.
++ */
++ cassert(sizeof (d8) == 1);
++ cassert(__alignof__ (d8) == 1);
++ {
++ struct {
++ __u8 pad;
++ d8 data;
++ } PACKED8 test;
++ cassert(sizeof test == 2);
++ cassert(sizeof test.data == 1);
++ cassert(__alignof__ test.data == 1);
++ cassert(__alignof__ test == 1);
++ }
++ cassert(sizeof (d16) == 2);
++ cassert(__alignof__ (d16) == 2);
++ {
++ struct {
++ __u8 pad;
++ d16 data;
++ } PACKED16 test;
++ cassert(sizeof test == 4);
++ cassert(sizeof test.data == 2);
++#if !__arm__
++ cassert(__alignof__ test.data == 2);
++#endif
++ cassert(__alignof__ test == 2);
++#if !__arm__
++ cassert(test.data.datum - &test.pad == 2);
++#endif
++ }
++ cassert(sizeof (d32) == 4);
++ cassert(__alignof__ (d32) == 4);
++ {
++ struct {
++ __u8 pad;
++ d32 data;
++ } PACKED32 test;
++ cassert(sizeof test == 8);
++ cassert(sizeof test.data == 4);
++ cassert(__alignof__ test.data == 4);
++ cassert(__alignof__ test == 4);
++ cassert(test.data.datum - &test.pad == 4);
++ }
++ cassert(sizeof (d64) == 8);
++ cassert(__alignof__ (d64) == 8);
++ {
++ struct {
++ __u8 pad;
++ d64 data;
++ } PACKED64 test;
++ cassert(sizeof test == 16);
++ cassert(sizeof test.data == 8);
++ cassert(__alignof__ test.data == 8);
++ cassert(__alignof__ test == 8);
++ cassert(test.data.datum - &test.pad == 8);
++ }
++
++ /* This is just a test of a struct with a single d64 element. */
++ cassert(sizeof (reiser4_dblock_nr) == 8);
++ cassert(__alignof__(reiser4_dblock_nr) == 8);
++
++ /*
+ * check for recursive panic.
+ */
+ if (in_panic == 0) {
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/flush_queue.c 2005-03-27 21:24:00.577259328 -0800
++++ linux-2.6.11/fs/reiser4/flush_queue.c 2005-03-27 21:24:02.755928120 -0800
+@@ -447,7 +447,7 @@
+
+ /* If all write requests registered in this "fq" are done we up
+ * the semaphore. */
+- if (atomic_sub_and_test(bio->bi_vcnt, &fq->nr_submitted))
++ if (atomic_sub_return(bio->bi_vcnt, &fq->nr_submitted) == 0)
+ up(&fq->io_sem);
+ }
+
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/key.c 2005-03-27 22:42:43.481268784 -0800
++++ linux-2.6.11/fs/reiser4/key.c 2005-03-27 23:42:53.958392832 -0800
+@@ -13,10 +13,10 @@
+ independent of key scheme. */
+ static const reiser4_key MINIMAL_KEY = {
+ .el = {
+- {0ull},
+- ON_LARGE_KEY({0ull},)
+- {0ull},
+- {0ull}
++ {{0,0,0,0,0,0,0,0}},
++ ON_LARGE_KEY({{0,0,0,0,0,0,0,0}},)
++ {{0,0,0,0,0,0,0,0}},
++ {{0,0,0,0,0,0,0,0}}
+ }
+ };
+
+@@ -24,10 +24,10 @@
+ independent of key scheme. */
+ static const reiser4_key MAXIMAL_KEY = {
+ .el = {
+- {~0ull},
+- ON_LARGE_KEY({~0ull},)
+- {~0ull},
+- {~0ull}
++ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},
++ ON_LARGE_KEY({{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},)
++ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}},
++ {{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}}
+ }
+ };
+
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/safe_link.c 2005-03-27 21:24:00.677244128 -0800
++++ linux-2.6.11/fs/reiser4/safe_link.c 2005-03-27 21:24:02.756927968 -0800
+@@ -61,7 +61,7 @@
+ reiser4_key sdkey; /* key of stat-data for the file safe-link is
+ * for */
+ d64 size; /* size to which file should be truncated */
+-} safelink_t;
++} PACKEDt2(reiser4_key, d64) safelink_t;
+
+ /*
+ * locality where safe-link items are stored. Next to the objectid of root
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/status_flags.c 2005-03-27 21:24:00.682243368 -0800
++++ linux-2.6.11/fs/reiser4/status_flags.c 2005-03-27 21:24:02.756927968 -0800
+@@ -153,6 +153,7 @@
+ &statuspage->stacktrace[no])
+
+ GETFRAME(0);
++#ifndef __arm__
+ GETFRAME(1);
+ GETFRAME(2);
+ GETFRAME(3);
+@@ -162,6 +163,7 @@
+ GETFRAME(7);
+ GETFRAME(8);
+ GETFRAME(9);
++#endif
+
+ #undef GETFRAME
+ #endif
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/dformat.h 2005-03-27 21:24:00.564261304 -0800
++++ linux-2.6.11/fs/reiser4/dformat.h 2005-03-27 23:29:03.223683704 -0800
+@@ -28,43 +28,84 @@
+
+ /* code on-disk data-types as structs with a single field
+ to rely on compiler type-checking. Like include/asm-i386/page.h */
++/* This code did not work on the arm with gcc 3.4.3 because the
++ * arm has a minimum structure size of 4 - packed is necessary to
++ * allow these types to be smaller than 4 - and because this version
++ * of gcc 'loses' the alignment if the structure contains just one
++ * element of alignment 8 (or probably any value greater than 4).
++ * To fix this and to make the code much more portable all the basic
++ * types are now just done as arrays of bytes - __u8.
++ *
++ * This is highly tricky, however the check code in debug.c should
++ * fire a compile time assert if it goes wrong.
++ */
++#if __arm__
++#define PACKED8 __attribute__ ((packed,aligned(1)))
++/* Warning: the presence of the packed attribute here means that any
++ * d16 in a structure so marked will lose its alignment. That doesn't
++ * seem to matter because there don't seem to be any d16's with odd
++ * structure offsets, but it might.
++ */
++#define PACKED16 __attribute__ ((packed,aligned(2)))
++#define PACKED32 __attribute__ ((aligned(4)))
++#define PACKED64 __attribute__ ((aligned(8)))
++#else
++#define PACKED8 __attribute__ ((aligned(1)))
++#define PACKED16 __attribute__ ((aligned(2)))
++#define PACKED32 __attribute__ ((aligned(4)))
++#define PACKED64 __attribute__ ((aligned(8)))
++#endif
+ typedef struct d8 {
+- __u8 datum;
+-} d8 __attribute__ ((aligned(1)));
++ __u8 datum[1];
++} PACKED8 d8;
+ typedef struct d16 {
+- __u16 datum;
+-} d16 __attribute__ ((aligned(2)));
++ __u8 datum[2];
++} PACKED16 d16;
+ typedef struct d32 {
+- __u32 datum;
+-} d32 __attribute__ ((aligned(4)));
++ __u8 datum[4];
++} PACKED32 d32;
+ typedef struct d64 {
+- __u64 datum;
+-} d64 __attribute__ ((aligned(8)));
++ __u8 datum[8];
++} PACKED64 d64;
+
++#define PACKEDt(t) __attribute__ ((packed,aligned(__alignof__ (t)) ))
++#define PACKEDt2(t1,t2) __attribute__ ((packed,aligned(\
++ __alignof__ (t1) < __alignof__ (t2) ? __alignof__ (t2) : __alignof__ (t1) )))
+ #define PACKED __attribute__((packed))
+
+ static inline __u8
+ d8tocpu(const d8 * ondisk /* on-disk value to convert */ )
+ {
+- return ondisk->datum;
++ return ondisk->datum[0];
+ }
+
+ static inline __u16
+ d16tocpu(const d16 * ondisk /* on-disk value to convert */ )
+ {
+- return __le16_to_cpu(get_unaligned(&ondisk->datum));
++ return ondisk->datum[0] + (ondisk->datum[1] << 8);
+ }
+
+ static inline __u32
+ d32tocpu(const d32 * ondisk /* on-disk value to convert */ )
+ {
+- return __le32_to_cpu(get_unaligned(&ondisk->datum));
++ return ondisk->datum[0] +
++ (ondisk->datum[1] << 8) +
++ (ondisk->datum[2] << 16) +
++ (ondisk->datum[3] << 24);
+ }
+
+ static inline __u64
+ d64tocpu(const d64 * ondisk /* on-disk value to convert */ )
+ {
+- return __le64_to_cpu(get_unaligned(&ondisk->datum));
++ __u32 low = ondisk->datum[0] +
++ (ondisk->datum[1] << 8) +
++ (ondisk->datum[2] << 16) +
++ (ondisk->datum[3] << 24);
++ __u64 high = ondisk->datum[4] +
++ (ondisk->datum[5] << 8) +
++ (ondisk->datum[6] << 16) +
++ (ondisk->datum[7] << 24);
++ return low + (high << 32);
+ }
+
+ static inline d8 *
+@@ -72,7 +113,7 @@
+ d8 * ondisk /* result */ )
+ {
+ assert("nikita-1264", oncpu < 0x100);
+- put_unaligned(oncpu, &ondisk->datum);
++ ondisk->datum[0] = oncpu;
+ return ondisk;
+ }
+
+@@ -81,7 +122,8 @@
+ d16 * ondisk /* result */ )
+ {
+ assert("nikita-1265", oncpu < 0x10000);
+- put_unaligned(__cpu_to_le16(oncpu), &ondisk->datum);
++ ondisk->datum[0] = oncpu;
++ ondisk->datum[1] = oncpu >> 8;
+ return ondisk;
+ }
+
+@@ -89,15 +131,27 @@
+ cputod32(__u32 oncpu /* CPU value to convert */ ,
+ d32 * ondisk /* result */ )
+ {
+- put_unaligned(__cpu_to_le32(oncpu), &ondisk->datum);
++ ondisk->datum[0] = oncpu; oncpu >>= 8;
++ ondisk->datum[1] = oncpu; oncpu >>= 8;
++ ondisk->datum[2] = oncpu; oncpu >>= 8;
++ ondisk->datum[3] = oncpu;
+ return ondisk;
+ }
+
+ static inline d64 *
+-cputod64(__u64 oncpu /* CPU value to convert */ ,
++cputod64(__u64 oncpuIn /* CPU value to convert */ ,
+ d64 * ondisk /* result */ )
+ {
+- put_unaligned(__cpu_to_le64(oncpu), &ondisk->datum);
++ __u32 oncpu = oncpuIn;
++ ondisk->datum[0] = oncpu; oncpu >>= 8;
++ ondisk->datum[1] = oncpu; oncpu >>= 8;
++ ondisk->datum[2] = oncpu; oncpu >>= 8;
++ ondisk->datum[3] = oncpu;
++ oncpu = oncpuIn >> 32;
++ ondisk->datum[4] = oncpu; oncpu >>= 8;
++ ondisk->datum[5] = oncpu; oncpu >>= 8;
++ ondisk->datum[6] = oncpu; oncpu >>= 8;
++ ondisk->datum[7] = oncpu;
+ return ondisk;
+ }
+
+@@ -111,7 +165,7 @@
+ /* data-type for block number on disk, disk format */
+ union reiser4_dblock_nr {
+ d64 blk;
+-};
++} PACKED64;
+
+ static inline reiser4_block_nr
+ dblock_to_cpu(const reiser4_dblock_nr * dblock)
+@@ -148,7 +202,7 @@
+ char uuid[16]; /* unique id */
+ char label[16]; /* filesystem label */
+ d64 diskmap; /* location of the diskmap. 0 if not present */
+-} reiser4_master_sb;
++} PACKED64 reiser4_master_sb;
+
+ /* __FS_REISER4_DFORMAT_H__ */
+ #endif
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/kassign.h 2005-03-27 21:24:00.588257656 -0800
++++ linux-2.6.11/fs/reiser4/kassign.h 2005-03-27 21:24:02.757927816 -0800
+@@ -46,7 +46,7 @@
+ d8 locality[sizeof (__u64)];
+ ON_LARGE_KEY(d8 ordering[sizeof (__u64)];)
+ d8 objectid[sizeof (__u64)];
+-} obj_key_id;
++} PACKED8 obj_key_id;
+
+ /* Information sufficient to uniquely identify directory entry within
+ compressed directory item.
+@@ -57,7 +57,7 @@
+ ON_LARGE_KEY(d8 ordering[sizeof (__u64)];)
+ d8 objectid[sizeof (__u64)];
+ d8 offset[sizeof (__u64)];
+-} de_id;
++} PACKED8 de_id;
+
+ extern int inode_onwire_size(const struct inode *obj);
+ extern char *build_inode_onwire(const struct inode *obj, char *area);
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/key.h 2005-03-27 21:24:00.591257200 -0800
++++ linux-2.6.11/fs/reiser4/key.h 2005-03-27 23:41:07.744539792 -0800
+@@ -106,7 +106,7 @@
+ union reiser4_key {
+ d64 el[KEY_LAST_INDEX];
+ int pad;
+-};
++} PACKED64;
+
+ /* bitmasks showing where within reiser4_key particular key is
+ stored. */
+@@ -138,6 +138,20 @@
+ KEY_ORDERING_SHIFT = 0,
+ } reiser4_key_field_shift;
+
++/* initialise a key, this is a compile time constant initialiser expressed as
++ * three or four (as appropriate) 8 byte initialisers, there are braces around
++ * each 8 byte quantity but not around the whole initializer.
++ */
++#define KEY_INIT(type,loc,order,band,oid,off)\
++{{ (0xf&(type))+(0xf0&((loc) << 4)), 0xff&((loc) >> 4), 0xff&((loc) >> 12), 0xff&((loc) >> 20),\
++ 0xff&((loc) >> 28), 0xff&((loc) >> 36), 0xff&((loc) >> 44), 0xff&((loc) >> 52) }},\
++ON_LARGE_KEY({{ 0xff&(order), 0xff&((order)>>8), 0xff&((order)>>16), 0xff&((order)>>24),\
++ 0xff&((order)>>32), 0xff&((order)>>40), 0xff&((order)>>48), 0xff&((order)>>56) }},)\
++{{ 0xff&(oid), 0xff&((oid)>>8), 0xff&((oid)>>16), 0xff&((oid)>>24),\
++ 0xff&((oid)>>32), 0xff&((oid)>>40), 0xff&((oid)>>48), (0xf&((oid)>>56))+(0xf0&((band)<<4))}},\
++{{ 0xff&(off), 0xff&((off)>>8), 0xff&((off)>>16), 0xff&((off)>>24),\
++ 0xff&((off)>>32), 0xff&((off)>>40), 0xff&((off)>>48), 0xff&((off)>>56) }}
++
+ static inline __u64
+ get_key_el(const reiser4_key * key, reiser4_key_field_index off)
+ {
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/status_flags.h 2005-03-27 21:24:00.682243368 -0800
++++ linux-2.6.11/fs/reiser4/status_flags.h 2005-03-27 21:24:02.758927664 -0800
+@@ -33,7 +33,7 @@
+ last sector where io error happened if status is "io error encountered" */
+ d64 stacktrace[10]; /* Last ten functional calls made (addresses)*/
+ char texterror[REISER4_TEXTERROR_LEN]; /* Any error message if appropriate, otherwise filled with zeroes */
+-};
++} PACKED64;
+
+ int reiser4_status_init(reiser4_block_nr block);
+ int reiser4_status_query(u64 *status, u64 *extended);
+--- linux-2.6.11/.pc/reiser4/fs/reiser4/wander.h 2005-03-27 21:24:00.709239264 -0800
++++ linux-2.6.11/fs/reiser4/wander.h 2005-03-27 22:14:59.663207576 -0800
+@@ -19,7 +19,7 @@
+ struct journal_header {
+ /* last written transaction head location */
+ d64 last_committed_tx;
+-};
++} PACKED64;
+
+ typedef struct journal_location {
+ reiser4_block_nr footer;
+@@ -46,7 +46,7 @@
+ super block */
+ d64 nr_files;
+ d64 next_oid;
+-};
++} PACKED64;
+
+ /* Each wander record (except the first one) has unified format with wander
+ record header followed by an array of log entries */
+@@ -66,7 +66,7 @@
+
+ /* number of previous block in commit */
+ d64 next_block;
+-};
++} PACKED64;
+
+ /* The first wander record (transaction head) of written transaction has the
+ special format */
+@@ -98,7 +98,7 @@
+ separately from super block */
+ d64 nr_files;
+ d64 next_oid;
+-};
++} PACKED64;
+
+ /* A transaction gets written to disk as a set of wander records (each wander
+ record size is fs block) */
+@@ -108,7 +108,7 @@
+ struct wander_entry {
+ d64 original; /* block original location */
+ d64 wandered; /* block wandered location */
+-};
++} PACKED64;
+
+ /* REISER4 JOURNAL WRITER FUNCTIONS */
+
--- /dev/null
+--- original/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:12 2005
++++ linux-2.6.11/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:25 2005
+@@ -139,7 +139,6 @@
+ };
+
+ static struct i2c_client x1205_i2c_client = {
+- .id = I2C_DRIVERID_X1205,
+ .flags = 0,
+ .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit
+ .adapter = NULL, // the adapter we sit on assigned in attach
+@@ -301,7 +300,6 @@
+ int errno;
+
+ x1205_i2c_client.adapter = adapter;
+- x1205_i2c_client.id++;
+
+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver
+ return -EIO;
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12
+# Sat Jun 18 17:17:09 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_IOMAP=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+CONFIG_ARCH_IXP4XX=y
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+
+#
+# Intel IXP4xx Implementation Options
+#
+
+#
+# IXP4xx Platforms
+#
+# CONFIG_ARCH_AVILA is not set
+# CONFIG_ARCH_ADI_COYOTE is not set
+# CONFIG_ARCH_IXDP425 is not set
+# CONFIG_MACH_IXDPG425 is not set
+# CONFIG_MACH_IXDP465 is not set
+CONFIG_ARCH_NSLU2=y
+# CONFIG_ARCH_PRPMC1100 is not set
+# CONFIG_MACH_GTWX5715 is not set
+
+#
+# IXP4xx Options
+#
+CONFIG_IXP4XX_INDIRECT_PCI=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMB_INTERWORK is not set
+# CONFIG_ARCH_XSCALE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_XSCALE_PMU=y
+CONFIG_DMABOUNCE=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_NAMES is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_DISCONTIGMEM is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_IXP4XX=y
+# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PCI is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=10240
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=m
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=m
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_IXP4XX_WATCHDOG=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_RTC=m
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_IOP3XX is not set
+# CONFIG_I2C_ISA is not set
+CONFIG_I2C_IXP4XX=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Hardware Sensors Chip support
+#
+CONFIG_I2C_SENSOR=y
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+
+#
+# Other I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+CONFIG_SENSORS_X1205=y
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+
+#
+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+
+#
+# USB Host-to-Host Cables
+#
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_GENESYS=y
+CONFIG_USB_NET1080=y
+CONFIG_USB_PL2301=y
+CONFIG_USB_KC2190=y
+
+#
+# Intelligent USB Devices/Gadgets
+#
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_ZAURUS=y
+CONFIG_USB_CDCETHER=y
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_AX8817X=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB ATM/DSL drivers
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_FS_NOR_ECC is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
--- /dev/null
+--- linux-2.6.12.2/drivers/usb/core/hub.c.bak 2005-09-19 20:29:14.000000000 +0000
++++ linux-2.6.12.2/drivers/usb/core/hub.c 2005-09-19 20:30:44.000000000 +0000
+@@ -1026,6 +1026,19 @@
+
+ dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum);
+
++ // --- Forward-Ported Linksys Disk 1 & Disk 2 LED Control (Port done 16.Sept.05 by Philipp Kirchhofer) ---
++ // Copy & paste from nslu2-io.c
++ #define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
++ #define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
++ // Copy & Paste end
++
++ if (*udev->devpath == 0x31) {
++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF;
++ } else if (*udev->devpath == 0x32) {
++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF;
++ }
++ // --- End LED Control ---
++
+ /* Free up all the children before we remove this device */
+ for (i = 0; i < USB_MAXCHILDREN; i++) {
+ if (udev->children[i])
+@@ -2175,6 +2188,19 @@
+ udev->bus->controller->driver->name,
+ udev->devnum);
+
++ // --- Start LED Control ---
++ // Copy & paste from nslu2-io.c
++ #define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
++ #define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
++ // Copy & Paste end
++
++ if (*udev->devpath == 0x31) {
++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON;
++ } else if (*udev->devpath == 0x32) {
++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON;
++ }
++ // --- End LED Control ---
++
+ /* Set up TT records, if needed */
+ if (hdev->tt) {
+ udev->tt = hdev->tt;
+--- linux-2.6.12.2/drivers/usb/storage/transport.c.bak 2005-09-19 20:29:25.000000000 +0000
++++ linux-2.6.12.2/drivers/usb/storage/transport.c 2005-09-19 20:29:55.000000000 +0000
+@@ -60,6 +60,60 @@
+ #include "scsiglue.h"
+ #include "debug.h"
+
++// --- Forward-Ported Linksys Disk 1 & Disk 2 LED Activity Blinking Part 1 (Port done 16.Sept.05 by Philipp Kirchhofer) ---
++// Copy & Paste from nslu2-io.c
++#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
++#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
++
++#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
++#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
++// Copy & Paste End
++
++#define JIFFIES_BLINKING_TIME 6
++#define ON_LED_INTERVAL 3
++unsigned long turn_on_time;
++
++static struct timer_list usb1_led_timer; /* ide led switch */
++static struct timer_list usb2_led_timer; /* ide led switch */
++
++// Turns on Disk 1 LED
++static void turn_on_led_usb1(unsigned long ptr) {
++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; // 0xfff7
++ return;
++}
++
++// Turns on Disk 2 LED
++static void turn_on_led_usb2(unsigned long ptr) {
++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; // 0xfffb
++ return;
++}
++
++// Turns on Disk 1 LED after ON_LED_INTERVAL jiffies
++static void usb_1_led_timer(void) {
++ usb1_led_timer.expires = jiffies + ON_LED_INTERVAL;
++ add_timer(&usb1_led_timer);
++ return;
++}
++
++// Turns on Disk 2 LED after ON_LED_INTERVAL jiffies
++static void usb_2_led_timer(void) {
++ usb2_led_timer.expires = jiffies + ON_LED_INTERVAL;
++ add_timer(&usb2_led_timer);
++ return;
++}
++
++// Initializes Timers
++unsigned long initialized_timers = 0;
++static void initializeTimers() {
++ if (initialized_timers != 1) {
++ init_timer(&usb1_led_timer);
++ usb1_led_timer.function = turn_on_led_usb1;
++ init_timer(&usb2_led_timer);
++ usb2_led_timer.function = turn_on_led_usb2;
++ initialized_timers = 1;
++ }
++}
++// --- End Disk LED Activity Blinking Part 1 ---
+
+ /***********************************************************************
+ * Data transfer routines
+@@ -499,6 +553,21 @@
+
+ /* are we scatter-gathering? */
+ if (use_sg) {
++ // --- Disk LED Activity Blinking Part 2 ---
++ initializeTimers();
++ if ((jiffies - turn_on_time) >= JIFFIES_BLINKING_TIME) {
++ if (*us->pusb_dev->devpath == 0x31) {
++ del_timer_sync(&usb1_led_timer);
++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF;
++ usb_1_led_timer();
++ } else if (*us->pusb_dev->devpath == 0x32) {
++ del_timer_sync(&usb2_led_timer);
++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF;
++ usb_2_led_timer();
++ }
++ turn_on_time = jiffies;
++ }
++ // --- End Disk LED Activity Blinking Part 2 ---
+ /* use the usb core scatter-gather primitives */
+ result = usb_stor_bulk_transfer_sglist(us, pipe,
+ (struct scatterlist *) buf, use_sg,
--- /dev/null
+--- linux-2.6.12/drivers/char/random.c~ 2005-05-14 16:42:24.000000000 -0400
++++ linux-2.6.12/drivers/char/random.c 2005-05-14 16:42:46.000000000 -0400
+@@ -646,6 +646,7 @@ extern void add_input_randomness(unsigne
+ add_timer_randomness(&input_timer_state,
+ (type << 4) ^ code ^ (code >> 4) ^ value);
+ }
++EXPORT_SYMBOL_GPL(add_input_randomness);
+
+ void add_interrupt_randomness(int irq)
+ {
+--- linux-2.6.12/lib/kobject_uevent.c~ 2005-05-14 16:45:13.000000000 -0400
++++ linux-2.6.12/lib/kobject_uevent.c 2005-05-14 16:45:27.000000000 -0400
+@@ -178,6 +178,7 @@ static inline int send_uevent(const char
+
+ #ifdef CONFIG_HOTPLUG
+ char hotplug_path[HOTPLUG_PATH_LEN] = "/sbin/hotplug";
++EXPORT_SYMBOL_GPL(hotplug_path);
+ u64 hotplug_seqnum;
+ static DEFINE_SPINLOCK(sequence_lock);
--- /dev/null
+--- linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:51:27.245788998 -0700
++++ linux-2.6.11/arch/arm/boot/compressed/head.S 2005-06-17 17:54:45.041806429 -0700
+@@ -37,6 +37,7 @@
+ defined(CONFIG_ARCH_INTEGRATOR) || \
+ defined(CONFIG_ARCH_PXA) || \
+ defined(CONFIG_ARCH_IXP4XX) || \
++ defined(CONFIG_ARCH_NSLU2) || \
+ defined(CONFIG_ARCH_IXP2000) || \
+ defined(CONFIG_ARCH_LH7A40X) || \
+ defined(CONFIG_ARCH_OMAP)
+--- linux-2.6.11/.pc/2.6.patch/arch/arm/boot/compressed/head-xscale.S 2005-03-01 23:37:52.000000000 -0800
++++ linux-2.6.11/arch/arm/boot/compressed/head-xscale.S 2005-06-17 17:51:32.546985425 -0700
+@@ -47,3 +47,8 @@
+ orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
+ #endif
+
++#ifdef CONFIG_ARCH_NSLU2
++ mov r7, #(MACH_TYPE_NSLU2 & 0xff)
++ orr r7, r7, #(MACH_TYPE_NSLU2 & 0xff00)
++#endif
++
+--- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:27.365770810 -0700
++++ linux-2.6.11/arch/arm/mach-ixp4xx/Kconfig 2005-06-17 17:51:32.560983303 -0700
+@@ -43,6 +43,12 @@
+ IXDP465 Development Platform (Also known as BMP).
+ For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+
++config ARCH_NSLU2
++ bool "NSLU2"
++ help
++ Say 'Y' here if you want your kernel to support Linksys's
++ NSLU2 NAS device. For more information on this platform,
++ see http://www.nslu2-linux.org
+
+ #
+ # IXCDP1100 is the exact same HW as IXDP425, but with a different machine
+--- linux-2.6.11/.pc/2.6.patch/arch/arm/mach-ixp4xx/Makefile 2005-06-17 17:51:27.365770810 -0700
++++ linux-2.6.11/arch/arm/mach-ixp4xx/Makefile 2005-06-17 17:51:32.560983303 -0700
+@@ -8,4 +8,4 @@
+ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
+ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
+-
++obj-$(CONFIG_ARCH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-part.o nslu2-io.o
+--- linux-2.6.11/.pc/2.6.patch/arch/arm/tools/mach-types 2005-06-17 17:51:27.423762020 -0700
++++ linux-2.6.11/arch/arm/tools/mach-types 2005-06-17 17:51:32.564982697 -0700
+@@ -604,7 +604,7 @@
+ roverp7 MACH_ROVERP7 ROVERP7 594
+ pr818s MACH_PR818S PR818S 595
+ trxpro MACH_TRXPRO TRXPRO 596
+-nslu2 MACH_NSLU2 NSLU2 597
++nslu2 ARCH_NSLU2 NSLU2 597
+ e400 MACH_E400 E400 598
+ trab MACH_TRAB TRAB 599
+ cmc_pu2 MACH_CMC_PU2 CMC_PU2 600
+--- linux-2.6.11/.pc/2.6.patch/drivers/mtd/maps/ixp4xx.c 2005-03-01 23:37:30.000000000 -0800
++++ linux-2.6.11/drivers/mtd/maps/ixp4xx.c 2005-06-17 17:51:32.566982394 -0700
+@@ -94,7 +94,11 @@
+ struct resource *res;
+ };
+
++#ifdef CONFIG_ARCH_NSLU2
++static const char *probes[] = { "cmdlinepart", "RedBoot", "NSLU2", NULL };
++#else
+ static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
++#endif
+
+ static int ixp4xx_flash_remove(struct device *_dev)
+ {
+--- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/hardware.h 2005-03-01 23:37:51.000000000 -0800
++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/hardware.h 2005-06-17 17:51:32.567982242 -0700
+@@ -44,5 +44,6 @@
+ #include "ixdp425.h"
+ #include "coyote.h"
+ #include "prpmc1100.h"
++#include "nslu2.h"
+
+ #endif /* _ASM_ARCH_HARDWARE_H */
+--- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/irqs.h 2005-03-01 23:38:12.000000000 -0800
++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/irqs.h 2005-06-17 17:51:32.568982091 -0700
+@@ -93,4 +93,11 @@
+ #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
+ #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
+
++/*
++ * NSLU2 board IRQs
++ */
++#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11
++#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10
++#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9
++
+ #endif
--- /dev/null
+/*
+ * arch/arm/mach-ixp4xx/nslu2-setup.c
+ *
+ * NSLU2 board-setup
+ *
+ * based ixdp425-setup.c:
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Author: Mark Rakes <mrakes at mac.com>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * Fixed missing init_time in MACHINE_START kas11 10/22/04
+ * Changed to conform to new style __init ixdp425 kas11 10/22/04
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+void __init nslu2_map_io(void)
+{
+ ixp4xx_map_io();
+}
+
+static struct flash_platform_data nslu2_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource nslu2_flash_resource = {
+ .start = NSLU2_FLASH_BASE,
+ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device nslu2_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nslu2_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &nslu2_flash_resource,
+};
+
+static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
+ .sda_pin = NSLU2_SDA_PIN,
+ .scl_pin = NSLU2_SCL_PIN,
+};
+
+static struct platform_device nslu2_i2c_controller = {
+ .name = "IXP4XX-I2C",
+ .id = 0,
+ .dev = {
+ .platform_data = &nslu2_i2c_gpio_pins,
+ },
+ .num_resources = 0
+};
+
+static struct resource nslu2_uart_resources[] = {
+ {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct plat_serial8250_port nslu2_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ }
+};
+
+static struct platform_device nslu2_uart = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = nslu2_uart_data,
+ .num_resources = 2,
+ .resource = nslu2_uart_resources
+};
+
+static struct platform_device *nslu2_devices[] __initdata = {
+ &nslu2_i2c_controller,
+ &nslu2_flash,
+ &nslu2_uart
+};
+
+static void n2_power_off(void)
+{
+ /* This causes the box to drop the power and go dead. */
+#define GPIO_PO_BM 0x0100 //b0000 0001 0000 0000
+ *IXP4XX_GPIO_GPOER &= ~GPIO_PO_BM; // enable the pwr cntl gpio
+ *IXP4XX_GPIO_GPOUTR |= GPIO_PO_BM; // do the deed
+}
+
+static void __init nslu2_init(void)
+{
+ ixp4xx_sys_init();
+
+ pm_power_off = n2_power_off;
+ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
+}
+
+MACHINE_START(NSLU2, "Linksys NSLU2")
+ BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS,
+ IXP4XX_PERIPHERAL_BASE_VIRT)
+ MAPIO(nslu2_map_io)
+ INITIRQ(ixp4xx_init_irq) //FIXME: all irq are off here
+ .timer = &ixp4xx_timer,
+ // INITTIME(ixp4xx_init_time) //this was missing in 2.6.7 code ...soft reboot needed?
+ BOOT_PARAMS(0x0100)
+ INIT_MACHINE(nslu2_init)
+MACHINE_END
+
--- /dev/null
+--- original/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:12 2005
++++ linux-2.6.11/drivers/i2c/chips/x1205-rtc.c Sat Mar 5 23:41:25 2005
+@@ -139,7 +139,6 @@
+ };
+
+ static struct i2c_client x1205_i2c_client = {
+- .id = I2C_DRIVERID_X1205,
+ .flags = 0,
+ .addr = X1205_I2C_BUS_ADDR, // chip address - NOTE: 7bit
+ .adapter = NULL, // the adapter we sit on assigned in attach
+@@ -301,7 +300,6 @@
+ int errno;
+
+ x1205_i2c_client.adapter = adapter;
+- x1205_i2c_client.id++;
+
+ if ((x1205_get_datetime(&x1205_i2c_client, &tm, X1205_CCR_BASE)) != NOERR) //test for functional driver
+ return -EIO;
--- /dev/null
+--- linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h.orig 2005-11-07 23:16:48.456117450 -0800
++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/memory.h 2005-11-07 23:16:58.160728123 -0800
+@@ -8,6 +8,7 @@
+ #define __ASM_ARCH_MEMORY_H
+
+ #include <asm/sizes.h>
++#include <asm/page.h>
+
+ /*
+ * Physical DRAM offset.
--- /dev/null
+--- linux-2.6.14/drivers/i2c/chips/Kconfig.orig 2005-11-07 22:30:30.413306237 -0800
++++ linux-2.6.14/drivers/i2c/chips/Kconfig 2005-11-07 22:41:15.785916976 -0800
+@@ -126,13 +126,13 @@ config SENSORS_MAX6875
+ This driver can also be built as a module. If so, the module
+ will be called max6875.
+
+-config RTC_X1205_I2C
+- tristate "Xicor X1205 RTC chip"
+- depends on I2C && EXPERIMENTAL
+- help
+- If you say yes here you get support for the Xicor X1205 RTC chip.
++config SENSORS_X1205
++ tristate "Xicor X1205 RTC chip"
++ depends on I2C
++ help
++ If you say yes here you get support for the Xicor X1205 RTC chip.
+
+- This driver can also be built as a module. If so, the module
+- will be called x1205.
++ This driver can also be built as a module. If so, the module
++ will be called x1205
+
+ endmenu
+--- linux-2.6.14/drivers/i2c/chips/Makefile.orig 2005-11-07 22:30:30.417306489 -0800
++++ linux-2.6.14/drivers/i2c/chips/Makefile 2005-11-07 22:41:59.616675071 -0800
+@@ -13,7 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591
+ obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o
+ obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
+ obj-$(CONFIG_TPS65010) += tps65010.o
+-obj-$(CONFIG_RTC_X1205_I2C) += x1205.o
++obj-$(CONFIG_SENSORS_X1205) += x1205.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
+ EXTRA_CFLAGS += -DDEBUG
+--- linux-2.6.14/drivers/i2c/chips/x1205.c.orig 2005-11-07 22:30:30.421306741 -0800
++++ linux-2.6.14/drivers/i2c/chips/x1205.c 2005-11-07 22:42:54.960157617 -0800
+@@ -1,14 +1,16 @@
+ /*
+- * x1205.c - An i2c driver for the Xicor X1205 RTC
++ * linux/drivers/i2c/chips/x1205.c
++ *
++ * x1205.c - An 12c driver for the Xicor X1205 RTC
+ * Copyright 2004 Karen Spearel
+ * Copyright 2005 Alessandro Zummo
+ *
+ * please send all reports to:
+ * kas11 at tampabay dot rr dot com
+ * a dot zummo at towertech dot it
+- *
++ *
+ * based on the other drivers in this same directory.
+- *
++ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+@@ -26,83 +28,36 @@
+
+ #include <linux/x1205.h>
+
+-#define DRV_VERSION "0.9.9"
++#define EPOCH_1900 1900
++#define EPOCH_1970 1970
++
++#define DRIVER_VERSION "0.9.6"
++#define DRIVER_NAME (x1205_driver.name)
+
+-/* Addresses to scan: none. This chip is located at
+- * 0x6f and uses a two bytes register addressing.
+- * Two bytes need to be written to read a single register,
+- * while most other chips just require one and take the second
+- * one as the data to be written. To prevent corrupting
+- * unknown chips, the user must explicitely set the probe parameter.
+- */
+
+-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
++/* Addresses to scan */
++static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END };
+
+ /* Insmod parameters */
+ I2C_CLIENT_INSMOD;
+ I2C_CLIENT_MODULE_PARM(hctosys,
+ "Set the system time from the hardware clock upon initialization");
+
+-/* offsets into CCR area */
+-
+-#define CCR_SEC 0
+-#define CCR_MIN 1
+-#define CCR_HOUR 2
+-#define CCR_MDAY 3
+-#define CCR_MONTH 4
+-#define CCR_YEAR 5
+-#define CCR_WDAY 6
+-#define CCR_Y2K 7
+-
+-#define X1205_REG_SR 0x3F /* status register */
+-#define X1205_REG_Y2K 0x37
+-#define X1205_REG_DW 0x36
+-#define X1205_REG_YR 0x35
+-#define X1205_REG_MO 0x34
+-#define X1205_REG_DT 0x33
+-#define X1205_REG_HR 0x32
+-#define X1205_REG_MN 0x31
+-#define X1205_REG_SC 0x30
+-#define X1205_REG_DTR 0x13
+-#define X1205_REG_ATR 0x12
+-#define X1205_REG_INT 0x11
+-#define X1205_REG_0 0x10
+-#define X1205_REG_Y2K1 0x0F
+-#define X1205_REG_DWA1 0x0E
+-#define X1205_REG_YRA1 0x0D
+-#define X1205_REG_MOA1 0x0C
+-#define X1205_REG_DTA1 0x0B
+-#define X1205_REG_HRA1 0x0A
+-#define X1205_REG_MNA1 0x09
+-#define X1205_REG_SCA1 0x08
+-#define X1205_REG_Y2K0 0x07
+-#define X1205_REG_DWA0 0x06
+-#define X1205_REG_YRA0 0x05
+-#define X1205_REG_MOA0 0x04
+-#define X1205_REG_DTA0 0x03
+-#define X1205_REG_HRA0 0x02
+-#define X1205_REG_MNA0 0x01
+-#define X1205_REG_SCA0 0x00
+-
+-#define X1205_CCR_BASE 0x30 /* Base address of CCR */
+-#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
+-
+-#define X1205_SR_RTCF 0x01 /* Clock failure */
+-#define X1205_SR_WEL 0x02 /* Write Enable Latch */
+-#define X1205_SR_RWEL 0x04 /* Register Write Enable */
+-
+-#define X1205_DTR_DTR0 0x01
+-#define X1205_DTR_DTR1 0x02
+-#define X1205_DTR_DTR2 0x04
+-
+-#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
+-
+ /* Prototypes */
++
+ static int x1205_attach(struct i2c_adapter *adapter);
+ static int x1205_detach(struct i2c_client *client);
+ static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
+-static int x1205_command(struct i2c_client *client, unsigned int cmd,
+- void *arg);
++static int x1205_validate_client(struct i2c_client *client);
++
++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
++ u8 reg_base);
++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
++ int datetoo, u8 reg_base);
++static int x1205_validate_tm(struct rtc_time *tm);
++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg);
++static int x1205_hctosys(struct i2c_client *client);
++
+
+ static struct i2c_driver x1205_driver = {
+ .owner = THIS_MODULE,
+@@ -110,6 +65,7 @@ static struct i2c_driver x1205_driver =
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = &x1205_attach,
+ .detach_client = &x1205_detach,
++/* .command = &x1205_command,*/
+ };
+
+ struct x1205_data {
+@@ -118,8 +74,9 @@ struct x1205_data {
+ unsigned int epoch;
+ };
+
+-static const unsigned char days_in_mo[] =
+- { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
++
++static const unsigned char days_in_mo[] =
++{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
+
+ static LIST_HEAD(x1205_clients);
+
+@@ -127,6 +84,7 @@ static LIST_HEAD(x1205_clients);
+ * commands to a specific client. This function will send the command
+ * to the first client.
+ */
++
+ int x1205_do_command(unsigned int cmd, void *arg)
+ {
+ struct list_head *walk;
+@@ -141,114 +99,98 @@ int x1205_do_command(unsigned int cmd, v
+ return -ENODEV;
+ }
+
+-#define is_leap(year) \
+- ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
+-
+-/* make sure the rtc_time values are in bounds */
+-static int x1205_validate_tm(struct rtc_time *tm)
+-{
+- int year = tm->tm_year + 1900;
+-
+- if ((tm->tm_year < 70) || (tm->tm_year > 255))
+- return -EINVAL;
+-
+- if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
+- return -EINVAL;
+-
+- if (tm->tm_mday > days_in_mo[tm->tm_mon]
+- + ((tm->tm_mon == 1) && is_leap(year)))
+- return -EINVAL;
+-
+- if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
+- return -EINVAL;
+-
+- return 0;
+-}
+
+ /*
+- * In the routines that deal directly with the x1205 hardware, we use
++ * in the routines that deal directly with the x1205 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
+- * Epoch is initialized as 2000. Time is set to UTC.
++ * Epoch is inited as 2000. Time is set to UT
+ */
++
+ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
+ u8 reg_base)
+ {
+- unsigned char dt_addr[2] = { 0, reg_base };
+- static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
++ static unsigned char dt_addr[] = { 0, };
++ static unsigned char sr_addr[] = { 0, };
+
+- unsigned char buf[8], sr;
++ unsigned char buf[8], sr;
+
+ struct i2c_msg msgs[] = {
+- { client->addr, 0, 2, sr_addr }, /* setup read ptr */
+- { client->addr, I2C_M_RD, 1, &sr }, /* read status */
+- { client->addr, 0, 2, dt_addr }, /* setup read ptr */
+- { client->addr, I2C_M_RD, 8, buf }, /* read date */
++ { client->addr, 0, 2, sr_addr }, /* random read */
++ { client->addr, I2C_M_RD, 1, &sr },
++ { client->addr, 0, 2, dt_addr }, /* random read */
++ { client->addr, I2C_M_RD, 8, buf },
+ };
+
+- struct x1205_data *data = i2c_get_clientdata(client);
++ struct x1205_data *xdata = i2c_get_clientdata(client);
+
+- /* read status register */
+- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+- return -EIO;
+- }
++ dt_addr[1] = reg_base;
++ sr_addr[1] = X1205_REG_SR;
+
+- /* check for battery failure */
+- if (sr & X1205_SR_RTCF) {
+- dev_warn(&client->dev,
+- "Clock had a power failure, you must set the date.\n");
+- return -EINVAL;
+- }
++ if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) ==
++ ARRAY_SIZE(msgs)) {
++ /* did we read the correct number of messages? */
++
++ /* check for battery failure */
++ if (sr & X1205_SR_RTCF)
++ {
++ dev_info(&client->adapter->dev,
++ "%s: Clock had a power failure, you must set the date.\n",
++ DRIVER_NAME);
+
+- /* read date registers */
+- if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) {
+- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+- return -EIO;
+- }
+-
+- dev_dbg(&client->dev,
+- "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
+- "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
+- __FUNCTION__,
+- buf[0], buf[1], buf[2], buf[3],
+- buf[4], buf[5], buf[6], buf[7]);
+-
+- tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
+- tm->tm_min = BCD2BIN(buf[CCR_MIN]);
+- tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
+- tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
+- tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
+- data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
+- tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900;
+- tm->tm_wday = buf[CCR_WDAY];
++ return -EINVAL;
++ }
+
+- dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+- "mday=%d, mon=%d, year=%d, wday=%d\n",
+- __FUNCTION__,
+- tm->tm_sec, tm->tm_min, tm->tm_hour,
+- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
++ dev_dbg(&client->dev,
++ "%s: raw read data - sec-%02x min-%02x hr-%02x"
++ " mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n",
++ __FUNCTION__,
++ buf[0], buf[1], buf[2], buf[3],
++ buf[4], buf[5], buf[6], buf[7]);
++
++ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
++ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
++ buf[CCR_HOUR] &= ~X1205_HR_MIL;
++ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */
++ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
++ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
++ xdata->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
++ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900;
++ tm->tm_wday = buf[CCR_WDAY];
++
++ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
++ "mday=%d, mon=%d, year=%d, wday=%d\n",
++ __FUNCTION__,
++ tm->tm_sec, tm->tm_min, tm->tm_hour,
++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
++ } else {
++ dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__);
++ return -EIO;
++ }
++
+ return 0;
+ }
+
++
+ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
+ int datetoo, u8 reg_base)
+ {
+ int i, err, xfer;
+
+- unsigned char buf[8];
++ static unsigned char wel[3] = { 0, X1205_REG_SR,
++ X1205_SR_WEL };
+
+- static const unsigned char wel[3] = { 0, X1205_REG_SR,
+- X1205_SR_WEL };
+
+- static const unsigned char rwel[3] = { 0, X1205_REG_SR,
+- X1205_SR_WEL | X1205_SR_RWEL };
++ static unsigned char rwel[3] = { 0, X1205_REG_SR,
++ X1205_SR_WEL | X1205_SR_RWEL };
+
+- static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
++ static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
+
+- struct x1205_data *data = i2c_get_clientdata(client);
++ static unsigned char data[3] = { 0, };
++ static unsigned char buf[8];
++
++ struct x1205_data *xdata = i2c_get_clientdata(client);
+
+- /* check if all values in the tm struct are correct */
+ if ((err = x1205_validate_tm(tm)) < 0)
+ return err;
+
+@@ -258,124 +200,52 @@ static int x1205_set_datetime(struct i2c
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+- buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
+- buf[CCR_MIN] = BIN2BCD(tm->tm_min);
+
+- /* set hour and 24hr bit */
++ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
++ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
++
++ /* Set 24HR format */
+ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
+
+- /* should we also set the date? */
+- if (datetoo) {
+- buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
++ if (datetoo == X1205_DATETOO) {
++ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
+
+ /* month, 0 - 11 */
+- buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); /* input is 0-11 */
+
+ /* year, since 1900 */
+- buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch);
+- buf[CCR_WDAY] = tm->tm_wday & 0x07;
+- buf[CCR_Y2K] = BIN2BCD(data->epoch / 100);
++ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch));
++ buf[CCR_WDAY] = tm->tm_wday & 7;
++ buf[CCR_Y2K] = BIN2BCD(xdata->epoch / 100);
+ }
+
+- /* this sequence is required to unlock the chip */
+ xfer = i2c_master_send(client, wel, 3);
+- if (xfer != 3) {
+- dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
++ dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer);
++ if (xfer != 3)
+ return -EIO;
+- }
+
+ xfer = i2c_master_send(client, rwel, 3);
+- if (xfer != 3) {
+- dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
++ dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer);
++ if (xfer != 3)
+ return -EIO;
+- }
+
+- /* write register's data */
+- for (i = 0; i < (datetoo ? 8 : 3); i++) {
+- unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
+-
+- xfer = i2c_master_send(client, rdata, 3);
+- if (xfer != 3) {
+- dev_err(&client->dev,
+- "%s: xfer=%d addr=%02x, data=%02x\n",
+- __FUNCTION__,
+- xfer, rdata[1], rdata[2]);
++ for (i = 0; i < 8; i++) {
++ data[1] = i + reg_base;
++ data[2] = buf[i];
++ xfer = i2c_master_send(client, data, 3);
++
++ dev_dbg(&client->dev, "%s: xfer %d addr, %02x, data %02x\n",
++ __FUNCTION__,
++ xfer, data[1], data[2]);
++
++ if (xfer != 3)
+ return -EIO;
+- }
+ };
+
+- /* disable further writes */
+ xfer = i2c_master_send(client, diswe, 3);
+- if (xfer != 3) {
+- dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
+- return -EIO;
+- }
+-
+- return 0;
+-}
+-
+-static int x1205_get_dtrim(struct i2c_client *client, int *trim)
+-{
+- unsigned char dtr;
+- static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
+-
+- struct i2c_msg msgs[] = {
+- { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
+- { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
+- };
+-
+- /* read dtr register */
+- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+- return -EIO;
+- }
+-
+- dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
+-
+- *trim = 0;
+-
+- if (dtr & X1205_DTR_DTR0)
+- *trim += 20;
+-
+- if (dtr & X1205_DTR_DTR1)
+- *trim += 10;
+-
+- if (dtr & X1205_DTR_DTR2)
+- *trim = -*trim;
+-
+- return 0;
+-}
+-
+-static int x1205_get_atrim(struct i2c_client *client, int *trim)
+-{
+- s8 atr;
+- static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
+-
+- struct i2c_msg msgs[] = {
+- { client->addr, 0, 2, atr_addr }, /* setup read ptr */
+- { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
+- };
+-
+- /* read atr register */
+- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+- return -EIO;
+- }
+-
+- dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
+-
+- /* atr is a two's complement value on 6 bits,
+- * perform sign extension. The formula is
+- * Catr = (atr * 0.25pF) + 11.00pF.
+- */
+- if (atr & 0x20)
+- atr |= 0xC0;
+-
+- dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
+-
+- *trim = (atr * 250) + 11000;
+-
+- dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
++ dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer);
++ if (xfer != 3)
++ return -EIO;
+
+ return 0;
+ }
+@@ -386,24 +256,28 @@ static int x1205_hctosys(struct i2c_clie
+
+ struct rtc_time tm;
+ struct timespec tv;
++
+
+ err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
+
+- if (err) {
+- dev_err(&client->dev,
+- "Unable to set the system clock\n");
++ if (err)
++ {
++ dev_info(&client->adapter->dev,
++ "%s: Unable to set the system clock\n",
++ DRIVER_NAME);
++
+ return err;
++
+ }
+
+- /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
+- * whether it stores the most close value or the value with partial
+- * seconds truncated. However, it is important that we use it to store
+- * the truncated value. This is because otherwise it is necessary,
+- * in an rtc sync function, to read both xtime.tv_sec and
+- * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
+- * of >32bits is not possible. So storing the most close value would
+- * slow down the sync API. So here we have the truncated value and
+- * the best guess is to add 0.5s.
++ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether
++ * it stores the most close value or the value with partial seconds
++ * truncated, however it is important for x1205_sync_rtc that it be
++ * defined to store the truncated value. This is because otherwise it
++ * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the
++ * sync function, and atomic reads of >32bits on ARM are not possible.
++ * So storing the most close value would slow down the sync API. So
++ * Here we have the truncated value and the best guess is to add 0.5s
+ */
+
+ tv.tv_nsec = NSEC_PER_SEC >> 1;
+@@ -413,15 +287,16 @@ static int x1205_hctosys(struct i2c_clie
+ * the month to be in the range 1-12
+ */
+
+- tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1,
++ tv.tv_sec = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
+ tm.tm_mday, tm.tm_hour,
+ tm.tm_min, tm.tm_sec);
+
+ do_settimeofday(&tv);
+
+- dev_info(&client->dev,
+- "setting the system clock to %d-%d-%d %d:%d:%d\n",
+- tm.tm_year + 1900, tm.tm_mon + 1,
++ dev_info(&client->adapter->dev,
++ "%s: Setting the system clock to %d-%d-%d %d:%d:%d\n",
++ DRIVER_NAME,
++ tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
+ tm.tm_mday, tm.tm_hour, tm.tm_min,
+ tm.tm_sec);
+
+@@ -432,7 +307,7 @@ struct x1205_limit
+ {
+ unsigned char reg;
+ unsigned char mask;
+- unsigned char min;
++ unsigned char min;
+ unsigned char max;
+ };
+
+@@ -443,16 +318,34 @@ static int x1205_validate_client(struct
+ /* Probe array. We will read the register at the specified
+ * address and check if the given bits are zero.
+ */
+- static const unsigned char probe_zero_pattern[] = {
+- /* register, mask */
++
++ const unsigned char probe_zero_pattern[] = {
++
+ X1205_REG_SR, 0x18,
++ X1205_REG_Y2K, 0xC6,
++ X1205_REG_DW, 0xF8,
++ X1205_REG_MO, 0xE0,
++ X1205_REG_DT, 0xC0,
++ X1205_REG_HR, 0x40,
++ X1205_REG_MN, 0x80,
++ X1205_REG_SC, 0x80,
+ X1205_REG_DTR, 0xF8,
+ X1205_REG_ATR, 0xC0,
+ X1205_REG_INT, 0x18,
+ X1205_REG_0, 0xFF,
++ X1205_REG_Y2K1, 0xC6,
++ X1205_REG_DWA1, 0x78,
++ X1205_REG_MOA1, 0x60,
++ X1205_REG_DTA1, 0x40,
++ X1205_REG_HRA1, 0x40,
++ X1205_REG_Y2K0, 0xC6,
++ X1205_REG_DWA0, 0x78,
++ X1205_REG_MOA0, 0x60,
++ X1205_REG_DTA0, 0x40,
++ X1205_REG_HRA0, 0x40,
+ };
+
+- static const struct x1205_limit probe_limits_pattern[] = {
++ const struct x1205_limit probe_limits_pattern[] = {
+ /* register, mask, min, max */
+ { X1205_REG_Y2K, 0xFF, 19, 20 },
+ { X1205_REG_DW, 0xFF, 0, 6 },
+@@ -463,23 +356,41 @@ static int x1205_validate_client(struct
+ { X1205_REG_MN, 0xFF, 0, 59 },
+ { X1205_REG_SC, 0xFF, 0, 59 },
+ { X1205_REG_Y2K1, 0xFF, 19, 20 },
++ { X1205_REG_DWA1, 0x7F, 0, 6 },
++ { X1205_REG_MOA1, 0x7F, 0, 12 },
++ { X1205_REG_DTA1, 0x7F, 0, 31 },
++ { X1205_REG_HRA1, 0x7F, 0, 23 },
++ { X1205_REG_MNA1, 0x7F, 0, 59 },
++ { X1205_REG_SCA1, 0x7F, 0, 59 },
+ { X1205_REG_Y2K0, 0xFF, 19, 20 },
++ { X1205_REG_DWA0, 0x7F, 0, 6 },
++ { X1205_REG_MOA0, 0x7F, 0, 12 },
++ { X1205_REG_DTA0, 0x7F, 0, 31 },
++ { X1205_REG_HRA0, 0x7F, 0, 23 },
++ { X1205_REG_MNA0, 0x7F, 0, 59 },
++ { X1205_REG_SCA0, 0x7F, 0, 59 },
+ };
+
+ /* check that registers have bits a 0 where expected */
+- for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
++
++ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2)
++ {
+ unsigned char buf;
+
+- unsigned char addr[2] = { 0, probe_zero_pattern[i] };
++ static unsigned char addr[2];
+
+ struct i2c_msg msgs[2] = {
+- { client->addr, 0, 2, addr },
++ { client->addr, 0, 2, addr }, /* random read */
+ { client->addr, I2C_M_RD, 1, &buf },
+ };
+
++ addr[0] = 0x00;
++ addr[1] = probe_zero_pattern[i];
++
+ xfer = i2c_transfer(client->adapter, msgs, 2);
++
+ if (xfer != 2) {
+- dev_err(&client->adapter->dev,
++ dev_dbg(&client->adapter->dev,
+ "%s: could not read register %x\n",
+ __FUNCTION__, addr[1]);
+
+@@ -487,42 +398,47 @@ static int x1205_validate_client(struct
+ }
+
+ if ((buf & probe_zero_pattern[i+1]) != 0) {
+- dev_err(&client->adapter->dev,
+- "%s: register=%02x, zero pattern=%d, value=%x\n",
++ dev_dbg(&client->adapter->dev,
++ "%s: register %x, zero pattern %d: %x\n",
+ __FUNCTION__, addr[1], i, buf);
+
+ return -ENODEV;
+ }
+ }
+
+- /* check limits (only registers with bcd values) */
+- for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
+- unsigned char reg, value;
++ /* check limits */
+
+- unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
++ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++)
++ {
++ unsigned char buf, val;
++
++ static unsigned char addr[2];
+
+ struct i2c_msg msgs[2] = {
+- { client->addr, 0, 2, addr },
+- { client->addr, I2C_M_RD, 1, ® },
++ { client->addr, 0, 2, addr }, /* random read */
++ { client->addr, I2C_M_RD, 1, &buf },
+ };
+
++ addr[0] = 0x00;
++ addr[1] = probe_limits_pattern[i].reg;
++
+ xfer = i2c_transfer(client->adapter, msgs, 2);
+
+ if (xfer != 2) {
+- dev_err(&client->adapter->dev,
++ dev_dbg(&client->adapter->dev,
+ "%s: could not read register %x\n",
+ __FUNCTION__, addr[1]);
+
+ return -EIO;
+ }
+
+- value = BCD2BIN(reg & probe_limits_pattern[i].mask);
++ val = BCD2BIN(buf & probe_limits_pattern[i].mask);
+
+- if (value > probe_limits_pattern[i].max ||
+- value < probe_limits_pattern[i].min) {
++ if (val > probe_limits_pattern[i].max ||
++ val < probe_limits_pattern[i].min) {
+ dev_dbg(&client->adapter->dev,
+- "%s: register=%x, lim pattern=%d, value=%d\n",
+- __FUNCTION__, addr[1], i, value);
++ "%s: register %x, lim pattern %d: %d\n",
++ __FUNCTION__, addr[1], i, val);
+
+ return -ENODEV;
+ }
+@@ -538,79 +454,66 @@ static int x1205_attach(struct i2c_adapt
+ return i2c_probe(adapter, &addr_data, x1205_probe);
+ }
+
+-int x1205_direct_attach(int adapter_id,
+- struct i2c_client_address_data *address_data)
+-{
+- int err;
+- struct i2c_adapter *adapter = i2c_get_adapter(adapter_id);
+-
+- if (adapter) {
+- err = i2c_probe(adapter,
+- address_data, x1205_probe);
+-
+- i2c_put_adapter(adapter);
+-
+- return err;
+- }
+-
+- return -ENODEV;
+-}
+-
+ static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
+ {
+- struct i2c_client *client;
+- struct x1205_data *data;
++ struct i2c_client *new_client;
++ struct x1205_data *xdata;
+
+ int err = 0;
+
+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+
+- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+- err = -ENODEV;
+- goto exit;
+- }
+-
+- if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
++ if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+- /* Initialize our structures */
+- data->epoch = 2000;
++ /* Fill our data structure */
+
+- client = &data->client;
+- client->addr = address;
+- client->driver = &x1205_driver;
+- client->adapter = adapter;
++ memset(xdata, 0, sizeof(struct x1205_data));
+
+- strlcpy(client->name, "x1205", I2C_NAME_SIZE);
++ xdata->epoch = 2000;
++
++
++ /* Prepare i2c_client structure */
++
++ new_client = &xdata->client;
++ i2c_set_clientdata(new_client, xdata);
++ new_client->addr = address;
++ new_client->adapter = adapter;
++ new_client->driver = &x1205_driver;
++ new_client->flags = 0;
++
++ strlcpy(new_client->name, "x1205", I2C_NAME_SIZE);
+
+- i2c_set_clientdata(client, data);
+
+ /* Verify the chip is really an X1205 */
+- if (kind < 0) {
+- if (x1205_validate_client(client) < 0) {
++
++ if (kind < 0)
++ {
++ if (x1205_validate_client(new_client) < 0) {
+ err = -ENODEV;
+ goto exit_kfree;
+ }
+ }
+
+ /* Inform the i2c layer */
+- if ((err = i2c_attach_client(client)))
++ if ((err = i2c_attach_client(new_client)))
+ goto exit_kfree;
+
+- list_add(&data->list, &x1205_clients);
++ list_add(&xdata->list, &x1205_clients);
+
+- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
++ dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n",
++ DRIVER_NAME);
+
+- /* If requested, set the system time */
++ /* If requested, se the system time */
+ if (hctosys)
+- x1205_hctosys(client);
++ x1205_hctosys(new_client);
+
+ return 0;
+
+ exit_kfree:
+- kfree(data);
++ kfree(xdata);
+
+ exit:
+ return err;
+@@ -620,23 +523,44 @@ static int x1205_detach(struct i2c_clien
+ {
+ int err;
+ struct x1205_data *data = i2c_get_clientdata(client);
+-
++
+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ list_del(&data->list);
+-
+ kfree(data);
++ return 0;
++}
++
++/* make sure the rtc_time values are in bounds */
++static int x1205_validate_tm(struct rtc_time *tm)
++{
++ tm->tm_year += 1900;
++
++ if (tm->tm_year < EPOCH_1970)
++ return -EINVAL;
++
++ if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
++ return -EINVAL;
++
++ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) &&
++ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400)))))
++ return -EINVAL;
++
++ if ((tm->tm_year -= EPOCH_1900) > 255)
++ return -EINVAL;
++
++ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
++ return -EINVAL;
+
+ return 0;
+ }
+
+-static int x1205_command(struct i2c_client *client, unsigned int cmd,
+- void *param)
++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm)
+ {
+- if (param == NULL)
++ if (client == NULL || tm == NULL)
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_TIME))
+@@ -646,34 +570,26 @@ static int x1205_command(struct i2c_clie
+
+ switch (cmd) {
+ case X1205_CMD_GETDATETIME:
+- return x1205_get_datetime(client, param, X1205_CCR_BASE);
++ return x1205_get_datetime(client, tm, X1205_CCR_BASE);
+
+ case X1205_CMD_SETTIME:
+- return x1205_set_datetime(client, param, 0,
+- X1205_CCR_BASE);
++ return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE);
+
+ case X1205_CMD_SETDATETIME:
+- return x1205_set_datetime(client, param, 1,
+- X1205_CCR_BASE);
++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE);
+
+ case X1205_CMD_GETALARM:
+- return x1205_get_datetime(client, param, X1205_ALM0_BASE);
++ return x1205_get_datetime(client, tm, X1205_ALM0_BASE);
+
+ case X1205_CMD_SETALARM:
+- return x1205_set_datetime(client, param, 1,
+- X1205_ALM0_BASE);
+-
+- case X1205_CMD_GETDTRIM:
+- return x1205_get_dtrim(client, param);
+-
+- case X1205_CMD_GETATRIM:
+- return x1205_get_atrim(client, param);
++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE);
+
+ default:
+ return -EINVAL;
+ }
+ }
+
++
+ static int __init x1205_init(void)
+ {
+ return i2c_add_driver(&x1205_driver);
+@@ -689,10 +605,8 @@ MODULE_AUTHOR(
+ "Alessandro Zummo <a.zummo@towertech.it>");
+ MODULE_DESCRIPTION("Xicor X1205 RTC driver");
+ MODULE_LICENSE("GPL");
+-MODULE_VERSION(DRV_VERSION);
+
+ EXPORT_SYMBOL_GPL(x1205_do_command);
+-EXPORT_SYMBOL_GPL(x1205_direct_attach);
+
+ module_init(x1205_init);
+ module_exit(x1205_exit);
+--- linux-2.6.14/include/linux/x1205.h.orig 2005-11-07 22:38:42.196252187 -0800
++++ linux-2.6.14/include/linux/x1205.h 2005-11-07 22:42:54.960157617 -0800
+@@ -1,31 +1,67 @@
+-/*
+- * x1205.h - defines for drivers/i2c/chips/x1205.c
+- * Copyright 2004 Karen Spearel
+- * Copyright 2005 Alessandro Zummo
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef __LINUX_X1205_H__
+-#define __LINUX_X1205_H__
+
+ /* commands */
+
+-#define X1205_CMD_GETDATETIME 0
+-#define X1205_CMD_SETTIME 1
+-#define X1205_CMD_SETDATETIME 2
++#define X1205_CMD_GETDATETIME 0
++#define X1205_CMD_SETTIME 1
++#define X1205_CMD_SETDATETIME 2
+ #define X1205_CMD_GETALARM 3
+ #define X1205_CMD_SETALARM 4
+-#define X1205_CMD_GETDTRIM 5
+-#define X1205_CMD_SETDTRIM 6
+-#define X1205_CMD_GETATRIM 7
+-#define X1205_CMD_SETATRIM 8
++
++/* flags */
++
++#define X1205_NODATE 0
++#define X1205_DATETOO 1
++
++/* offsets into read buf - add 2 for write buf */
++
++#define CCR_SEC 0
++#define CCR_MIN 1
++#define CCR_HOUR 2
++#define CCR_MDAY 3
++#define CCR_MONTH 4
++#define CCR_YEAR 5
++#define CCR_WDAY 6
++#define CCR_Y2K 7
++
++#define X1205_REG_SR 0x3F /* status register */
++#define X1205_REG_Y2K 0x37
++#define X1205_REG_DW 0x36
++#define X1205_REG_YR 0x35
++#define X1205_REG_MO 0x34
++#define X1205_REG_DT 0x33
++#define X1205_REG_HR 0x32
++#define X1205_REG_MN 0x31
++#define X1205_REG_SC 0x30
++#define X1205_REG_DTR 0x13
++#define X1205_REG_ATR 0x12
++#define X1205_REG_INT 0x11
++#define X1205_REG_0 0x10
++#define X1205_REG_Y2K1 0x0F
++#define X1205_REG_DWA1 0x0E
++#define X1205_REG_YRA1 0x0D
++#define X1205_REG_MOA1 0x0C
++#define X1205_REG_DTA1 0x0B
++#define X1205_REG_HRA1 0x0A
++#define X1205_REG_MNA1 0x09
++#define X1205_REG_SCA1 0x08
++#define X1205_REG_Y2K0 0x07
++#define X1205_REG_DWA0 0x06
++#define X1205_REG_YRA0 0x05
++#define X1205_REG_MOA0 0x04
++#define X1205_REG_DTA0 0x03
++#define X1205_REG_HRA0 0x02
++#define X1205_REG_MNA0 0x01
++#define X1205_REG_SCA0 0x00
++
++#define X1205_I2C_BUS_ADDR 0x6f /* hardwired into x1205 */
++#define X1205_CCR_BASE 0x30 /* Base address of CCR */
++#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
++
++#define X1205_SR_RTCF 0x01
++#define X1205_SR_WEL 0x02 /* Write Enable Latch bit */
++#define X1205_SR_RWEL 0x04 /* Register Write Enable Bit */
++
++#define X1205_HR_MIL 0x80 /* set in ccr.hour for 24 hr mode */
+
+ extern int x1205_do_command(unsigned int cmd, void *arg);
+-extern int x1205_direct_attach(int adapter_id,
+- struct i2c_client_address_data *address_data);
+
+-#endif /* __LINUX_X1205_H__ */
--- /dev/null
+--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c.orig 2005-11-07 22:26:36.010556202 -0800
++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-io.c 2005-11-07 22:27:15.921067613 -0800
+@@ -504,7 +504,7 @@ static int __init n2iom_init(void)
+ return -EBUSY;
+ }
+ else {
+- class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
+ }
+ #endif
+
+@@ -513,7 +513,7 @@ static int __init n2iom_init(void)
+ return -EBUSY;
+ }
+ else {
+- class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
+ }
+
+ return 0;
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14
+# Mon Nov 7 22:59:39 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SWAP_PREFETCH=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+CONFIG_ARCH_IXP4XX=y
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+
+#
+# Intel IXP4xx Implementation Options
+#
+
+#
+# IXP4xx Platforms
+#
+# CONFIG_ARCH_AVILA is not set
+# CONFIG_ARCH_ADI_COYOTE is not set
+# CONFIG_ARCH_IXDP425 is not set
+# CONFIG_MACH_IXDPG425 is not set
+# CONFIG_MACH_IXDP465 is not set
+CONFIG_MACH_NSLU2=y
+# CONFIG_ARCH_PRPMC1100 is not set
+# CONFIG_MACH_GTWX5715 is not set
+
+#
+# IXP4xx Options
+#
+CONFIG_IXP4XX_INDIRECT_PCI=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_XSCALE_PMU=y
+CONFIG_DMABOUNCE=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_PHYSDEV=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_IXP4XX=y
+# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=10240
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI Transport Layers
+#
+# CONFIG_SAS_CLASS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_ACX is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=m
+# CONFIG_KGDBOE is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_IXP4XX_WATCHDOG=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_RTC=m
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_IOP3XX is not set
+CONFIG_I2C_IXP4XX=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+CONFIG_SENSORS_X1205=y
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+CONFIG_VIDEO_BT848=m
+# CONFIG_VIDEO_SAA6588 is not set
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+CONFIG_VIDEO_STRADIS=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_VIDEO_VIDEOBUF=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_BUF=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA ARM devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_W9968CF is not set
+CONFIG_USB_PWC=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_GOTEMP is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+# CONFIG_REISER4_FS is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ASFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
--- /dev/null
+--- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700
++++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700
+@@ -38,10 +38,14 @@
+ #define BYTE1(h) ((h) & 0xFF)
+ #endif
+
++#define FLASHWORD(a) (*(__u16*)(a))
++#define FLASHVAL(a) FLASHWORD(a)
++#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0)
++
+ static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
+ {
+ map_word val;
+- val.x[0] = *(__u16 *) (map->map_priv_1 + ofs);
++ val.x[0] = FLASHVAL(map->map_priv_1 + ofs);
+ return val;
+ }
+
+@@ -53,19 +57,25 @@ static map_word ixp4xx_read16(struct map
+ static void ixp4xx_copy_from(struct map_info *map, void *to,
+ unsigned long from, ssize_t len)
+ {
+- int i;
+- u8 *dest = (u8 *) to;
+- u16 *src = (u16 *) (map->map_priv_1 + from);
+- u16 data;
+-
+- for (i = 0; i < (len / 2); i++) {
+- data = src[i];
+- dest[i * 2] = BYTE0(data);
+- dest[i * 2 + 1] = BYTE1(data);
++ u8 *dest, *src;
++
++ if (len <= 0)
++ return;
++
++ dest = (u8 *) to;
++ src = (u8 *) (map->map_priv_1 + from);
++ if (from & 1)
++ *dest++ = BYTE1(FLASHVAL(src-1)), ++src, --len;
++
++ while (len >= 2) {
++ u16 data = FLASHVAL(src); src += 2;
++ *dest++ = BYTE0(data);
++ *dest++ = BYTE1(data);
++ len -= 2;
+ }
+
+- if (len & 1)
+- dest[len - 1] = BYTE0(src[i]);
++ if (len > 0)
++ *dest++ = BYTE0(FLASHVAL(src));
+ }
+
+ /*
+@@ -75,7 +85,7 @@ static void ixp4xx_copy_from(struct map_
+ static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
+ {
+ if (!(adr & 1))
+- *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
++ FLASHSET(map->map_priv_1 + adr, d.x[0]);
+ }
+
+ /*
+@@ -83,7 +93,7 @@ static void ixp4xx_probe_write16(struct
+ */
+ static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
+ {
+- *(__u16 *) (map->map_priv_1 + adr) = d.x[0];
++ FLASHSET(map->map_priv_1 + adr, d.x[0]);
+ }
+
+ struct ixp4xx_flash_info {
--- /dev/null
+--- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700
++++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700
+@@ -22,6 +22,7 @@
+ #include <linux/string.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/map.h>
++#include <linux/mtd/cfi_endian.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/ioport.h>
+ #include <linux/device.h>
+@@ -30,17 +31,40 @@
+
+ #include <linux/reboot.h>
+
++/* On a little-endian IXP4XX system (tested on NSLU2) an LDRH or STRH
++ * will flip the second address bit - i.e. XOR the address with 10b.
++ * This causes the cfi commands (sent to the command address, 0xAA for
++ * 16 bit flash) to fail. This is fixed here by XOR'ing the address
++ * before use with 10b. The cost of this is that the flash layout ends
++ * up with pdp-endiannes (on an LE system), however this is not a problem
++ * as the access code consistently only accesses half words - so the
++ * endianness is not determinable on stuff which is written and read
++ * consistently in the little endian world.
++ *
++ * For flash data from the big-endian world, however, the results are
++ * weird - the pdp-endianness results in the data apparently being
++ * 2-byte swapped (as in dd conv=swab). To work round this the 16
++ * bit values are written and read using cpu_to_cfi16 and cfi16_to_cpu,
++ * by default these are no-ops, but if the MTD driver is configed with
++ * CONFIG_MTD_CFI_BE_BYTE_SWAP the macros will byte swap the data,
++ * resulting in a consistently BE view of the flash on both BE (no
++ * op) and LE systems. This config setting also causes the command
++ * data from the CFI implementation to get swapped - as is required
++ * so that this code will *unswap* it and give the correct command
++ * data to the flash.
++ */
+ #ifndef __ARMEB__
+ #define BYTE0(h) ((h) & 0xFF)
+ #define BYTE1(h) (((h) >> 8) & 0xFF)
++#define FLASHWORD(a) (*(__u16*)((u32)(a) ^ 2))
+ #else
+ #define BYTE0(h) (((h) >> 8) & 0xFF)
+ #define BYTE1(h) ((h) & 0xFF)
++#define FLASHWORD(a) (*(__u16*)(a))
+ #endif
+
+-#define FLASHWORD(a) (*(__u16*)(a))
+-#define FLASHVAL(a) FLASHWORD(a)
+-#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0)
++#define FLASHVAL(a) cfi16_to_cpu(FLASHWORD(a))
++#define FLASHSET(a,v) (FLASHWORD(a) = cpu_to_cfi16(v))
+
+ static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
+ {
--- /dev/null
+drivers/mtd/redboot.c: recognise a foreign byte sex partition table
+
+The RedBoot boot loader writes flash partition tables containing native
+byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an
+LE kernel from BE RedBoot) the current MTD driver fails to handle the
+partition table and therefore is unable to generate the correct partition
+map for the flash.
+
+The patch recognises that the FIS directory (the partition table) is
+byte-reversed by examining the partition table size, which is known to be
+one erase block (this is an assumption made elsewhere in redboot.c). If
+the size matches the erase block after byte swapping the value then
+byte-reversal is assumed, if not no further action is taken. The patched
+code is fail safe; should redboot.c be changed to support a partition table
+with a modified size field the test will fail and the partition table will
+be assumed to have the host byte sex.
+
+If byte-reversal is detected the patch byte swaps the remainder of the 32
+bit fields in the copy of the table; this copy is then used to set up the
+MTD partition map.
+
+Signed-off-by: John Bowler <jbowler@acm.org>
+Signed-off-by: Andrew Morton <akpm@osdl.org>
+Modified slightly and
+Signed-off-by: David Woodhouse <dwmw2@infradead.org>
+
+Index: drivers/mtd/redboot.c
+===================================================================
+RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v
+retrieving revision 1.18
+retrieving revision 1.19
+diff -u -p -r1.18 -r1.19
+--- linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
+@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru
+ i = numslots;
+ break;
+ }
+- if (!memcmp(buf[i].name, "FIS directory", 14))
++ if (!memcmp(buf[i].name, "FIS directory", 14)) {
++ /* This is apparently the FIS directory entry for the
++ * FIS directory itself. The FIS directory size is
++ * one erase block; if the buf[i].size field is
++ * swab32(erasesize) then we know we are looking at
++ * a byte swapped FIS directory - swap all the entries!
++ * (NOTE: this is 'size' not 'data_length'; size is
++ * the full size of the entry.)
++ */
++ if (swab32(buf[i].size) == master->erasesize) {
++ int j;
++ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
++ /* The unsigned long fields were written with the
++ * wrong byte sex, name and pad have no byte sex.
++ */
++ swab32s(&buf[j].flash_base);
++ swab32s(&buf[j].mem_base);
++ swab32s(&buf[j].size);
++ swab32s(&buf[j].entry_point);
++ swab32s(&buf[j].data_length);
++ swab32s(&buf[j].desc_cksum);
++ swab32s(&buf[j].file_cksum);
++ }
++ }
+ break;
++ }
+ }
+ if (i == numslots) {
+ /* Didn't find it */
+
+
--- /dev/null
+# The inline caller of these APIs were changed to have
+# const vaddr parameters...
+--- linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h.orig 2005-09-24 17:06:19.968099976 -0700
++++ linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h 2005-09-24 17:06:52.542149731 -0700
+@@ -113,7 +113,7 @@
+ }
+
+ static inline void
+-__ixp4xx_writesb(u32 bus_addr, u8 *vaddr, int count)
++__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count)
+ {
+ while (count--)
+ writeb(*vaddr++, bus_addr);
+@@ -136,7 +136,7 @@
+ }
+
+ static inline void
+-__ixp4xx_writesw(u32 bus_addr, u16 *vaddr, int count)
++__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count)
+ {
+ while (count--)
+ writew(*vaddr++, bus_addr);
+@@ -154,7 +154,7 @@
+ }
+
+ static inline void
+-__ixp4xx_writesl(u32 bus_addr, u32 *vaddr, int count)
++__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count)
+ {
+ while (count--)
+ writel(*vaddr++, bus_addr);
--- /dev/null
+--- linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:33:21.757679882 -0700
++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:47:02.581331058 -0700
+@@ -80,9 +80,9 @@ __ixp4xx_iounmap(void __iomem *addr)
+ #define __arch_ioremap(a, s, f, x) __ixp4xx_ioremap(a, s, f, x)
+ #define __arch_iounmap(a) __ixp4xx_iounmap(a)
+
+-#define writeb(p, v) __ixp4xx_writeb(p, v)
+-#define writew(p, v) __ixp4xx_writew(p, v)
+-#define writel(p, v) __ixp4xx_writel(p, v)
++#define writeb(v, p) __ixp4xx_writeb(v, p)
++#define writew(v, p) __ixp4xx_writew(v, p)
++#define writel(v, p) __ixp4xx_writel(v, p)
+
+ #define writesb(p, v, l) __ixp4xx_writesb(p, v, l)
+ #define writesw(p, v, l) __ixp4xx_writesw(p, v, l)
+@@ -97,8 +97,9 @@ __ixp4xx_iounmap(void __iomem *addr)
+ #define readsl(p, v, l) __ixp4xx_readsl(p, v, l)
+
+ static inline void
+-__ixp4xx_writeb(u8 value, u32 addr)
++__ixp4xx_writeb(u8 value, volatile void __iomem *p)
+ {
++ u32 addr = (u32)p;
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START) {
+@@ -113,15 +114,16 @@ __ixp4xx_writeb(u8 value, u32 addr)
+ }
+
+ static inline void
+-__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count)
++__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
+ {
+ while (count--)
+ writeb(*vaddr++, bus_addr);
+ }
+
+ static inline void
+-__ixp4xx_writew(u16 value, u32 addr)
++__ixp4xx_writew(u16 value, volatile void __iomem *p)
+ {
++ u32 addr = (u32)p;
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START) {
+@@ -136,15 +138,16 @@ __ixp4xx_writew(u16 value, u32 addr)
+ }
+
+ static inline void
+-__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count)
++__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
+ {
+ while (count--)
+ writew(*vaddr++, bus_addr);
+ }
+
+ static inline void
+-__ixp4xx_writel(u32 value, u32 addr)
++__ixp4xx_writel(u32 value, volatile void __iomem *p)
+ {
++ u32 addr = (u32)p;
+ if (addr >= VMALLOC_START) {
+ __raw_writel(value, addr);
+ return;
+@@ -154,15 +157,16 @@ __ixp4xx_writel(u32 value, u32 addr)
+ }
+
+ static inline void
+-__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count)
++__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
+ {
+ while (count--)
+ writel(*vaddr++, bus_addr);
+ }
+
+ static inline unsigned char
+-__ixp4xx_readb(u32 addr)
++__ixp4xx_readb(const volatile void __iomem *p)
+ {
++ u32 addr = (u32)p;
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START)
+@@ -177,15 +181,16 @@ __ixp4xx_readb(u32 addr)
+ }
+
+ static inline void
+-__ixp4xx_readsb(u32 bus_addr, u8 *vaddr, u32 count)
++__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
+ {
+ while (count--)
+ *vaddr++ = readb(bus_addr);
+ }
+
+ static inline unsigned short
+-__ixp4xx_readw(u32 addr)
++__ixp4xx_readw(const volatile void __iomem *p)
+ {
++ u32 addr = (u32)p;
+ u32 n, byte_enables, data;
+
+ if (addr >= VMALLOC_START)
+@@ -200,15 +205,16 @@ __ixp4xx_readw(u32 addr)
+ }
+
+ static inline void
+-__ixp4xx_readsw(u32 bus_addr, u16 *vaddr, u32 count)
++__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
+ {
+ while (count--)
+ *vaddr++ = readw(bus_addr);
+ }
+
+ static inline unsigned long
+-__ixp4xx_readl(u32 addr)
++__ixp4xx_readl(const volatile void __iomem *p)
+ {
++ u32 addr = (u32)p;
+ u32 data;
+
+ if (addr >= VMALLOC_START)
+@@ -221,7 +227,7 @@ __ixp4xx_readl(u32 addr)
+ }
+
+ static inline void
+-__ixp4xx_readsl(u32 bus_addr, u32 *vaddr, u32 count)
++__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
+ {
+ while (count--)
+ *vaddr++ = readl(bus_addr);
+@@ -239,7 +245,7 @@ __ixp4xx_readsl(u32 bus_addr, u32 *vaddr
+ eth_copy_and_sum((s),__mem_pci(c),(l),(b))
+
+ static inline int
+-check_signature(unsigned long bus_addr, const unsigned char *signature,
++check_signature(const unsigned char __iomem *bus_addr, const unsigned char *signature,
+ int length)
+ {
+ int retval = 0;
+@@ -389,7 +395,7 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u
+ #define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \
+ ((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
+ static inline unsigned int
+-__ixp4xx_ioread8(void __iomem *addr)
++__ixp4xx_ioread8(const void __iomem *addr)
+ {
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+@@ -398,12 +404,12 @@ __ixp4xx_ioread8(void __iomem *addr)
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ return (unsigned int)__raw_readb(port);
+ #else
+- return (unsigned int)__ixp4xx_readb(port);
++ return (unsigned int)__ixp4xx_readb(addr);
+ #endif
+ }
+
+ static inline void
+-__ixp4xx_ioread8_rep(void __iomem *addr, void *vaddr, u32 count)
++__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
+ {
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+@@ -412,12 +418,12 @@ __ixp4xx_ioread8_rep(void __iomem *addr,
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_readsb(addr, vaddr, count);
+ #else
+- __ixp4xx_readsb(port, vaddr, count);
++ __ixp4xx_readsb(addr, vaddr, count);
+ #endif
+ }
+
+ static inline unsigned int
+-__ixp4xx_ioread16(void __iomem *addr)
++__ixp4xx_ioread16(const void __iomem *addr)
+ {
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+@@ -426,12 +432,12 @@ __ixp4xx_ioread16(void __iomem *addr)
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ return le16_to_cpu(__raw_readw((u32)port));
+ #else
+- return (unsigned int)__ixp4xx_readw((u32)port);
++ return (unsigned int)__ixp4xx_readw(addr);
+ #endif
+ }
+
+ static inline void
+-__ixp4xx_ioread16_rep(void __iomem *addr, void *vaddr, u32 count)
++__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
+ {
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+@@ -440,12 +446,12 @@ __ixp4xx_ioread16_rep(void __iomem *addr
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_readsw(addr, vaddr, count);
+ #else
+- __ixp4xx_readsw(port, vaddr, count);
++ __ixp4xx_readsw(addr, vaddr, count);
+ #endif
+ }
+
+ static inline unsigned int
+-__ixp4xx_ioread32(void __iomem *addr)
++__ixp4xx_ioread32(const void __iomem *addr)
+ {
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+@@ -454,13 +460,13 @@ __ixp4xx_ioread32(void __iomem *addr)
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ return le32_to_cpu(__raw_readl((u32)port));
+ #else
+- return (unsigned int)__ixp4xx_readl((u32)port);
++ return (unsigned int)__ixp4xx_readl(addr);
+ #endif
+ }
+ }
+
+ static inline void
+-__ixp4xx_ioread32_rep(void __iomem *addr, void *vaddr, u32 count)
++__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
+ {
+ unsigned long port = (unsigned long __force)addr;
+ if (__is_io_address(port))
+@@ -469,7 +475,7 @@ __ixp4xx_ioread32_rep(void __iomem *addr
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_readsl(addr, vaddr, count);
+ #else
+- __ixp4xx_readsl(port, vaddr, count);
++ __ixp4xx_readsl(addr, vaddr, count);
+ #endif
+ }
+
+@@ -483,7 +489,7 @@ __ixp4xx_iowrite8(u8 value, void __iomem
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writeb(value, port);
+ #else
+- __ixp4xx_writeb(value, port);
++ __ixp4xx_writeb(value, addr);
+ #endif
+ }
+
+@@ -497,7 +503,7 @@ __ixp4xx_iowrite8_rep(void __iomem *addr
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writesb(addr, vaddr, count);
+ #else
+- __ixp4xx_writesb(port, vaddr, count);
++ __ixp4xx_writesb(addr, vaddr, count);
+ #endif
+ }
+
+@@ -511,7 +517,7 @@ __ixp4xx_iowrite16(u16 value, void __iom
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writew(cpu_to_le16(value), addr);
+ #else
+- __ixp4xx_writew(value, port);
++ __ixp4xx_writew(value, addr);
+ #endif
+ }
+
+@@ -525,7 +531,7 @@ __ixp4xx_iowrite16_rep(void __iomem *add
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writesw(addr, vaddr, count);
+ #else
+- __ixp4xx_writesw(port, vaddr, count);
++ __ixp4xx_writesw(addr, vaddr, count);
+ #endif
+ }
+
+@@ -539,7 +545,7 @@ __ixp4xx_iowrite32(u32 value, void __iom
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writel(cpu_to_le32(value), port);
+ #else
+- __ixp4xx_writel(value, port);
++ __ixp4xx_writel(value, addr);
+ #endif
+ }
+
+@@ -553,7 +559,7 @@ __ixp4xx_iowrite32_rep(void __iomem *add
+ #ifndef CONFIG_IXP4XX_INDIRECT_PCI
+ __raw_writesl(addr, vaddr, count);
+ #else
+- __ixp4xx_writesl(port, vaddr, count);
++ __ixp4xx_writesl(addr, vaddr, count);
+ #endif
+ }
+
--- /dev/null
+--- linux-2.6.14.1/fs/jffs2/nodelist.h.orig 2005-11-09 23:12:29.641449728 -0800
++++ linux-2.6.14.1/fs/jffs2/nodelist.h 2005-11-09 23:13:19.228570049 -0800
+@@ -44,7 +44,9 @@
+ #define D2(x)
+ #endif
+
+-#define JFFS2_NATIVE_ENDIAN
++#undef JFFS2_NATIVE_ENDIAN
++#define JFFS2_BIG_ENDIAN 1
++#undef JFFS2_LITTLE_ENDIAN
+
+ /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from
+ whatever OS we're actually running on here too. */
--- /dev/null
+--- linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
+@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void)
+ * IXP4xx timer tick
+ * We use OS timer1 on the CPU for the timer tick and the timestamp
+ * counter as a source of real clock ticks to account for missed jiffies.
++ *
++ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second,
++ * this is significantly greater than the actual number on any ixp4xx
++ * board. Neither this nor 'LATCH' are required by this code because
++ * the only requirement is to generate HZ timer_tick calls per second.
+ *************************************************************************/
++#if TICK_NSEC * HZ != 1000000000
++ /* This will cause the jiffies to drift unnecessarily. */
++# error CLOCK_TICK_RATE should be a multiple of HZ for this code
++#endif
++
++/* These are the control registers for the interrupt handler, they must
++ * only be read and written by the interrupt handler and by the init
++ * method (which sets them to 0).
++ */
++static volatile u32 last_timer_time;
++static volatile int accumulated_error;
++
++/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset
++ * this from the board level code if required. The following variables
++ * must be *written* only by set_board_tick_rate
++ */
++static u32 board_tick_rate;
++static u32 board_tick_per_1000; /* board_tick_rate/1000 */
++static u32 timer_count;
++
++/* The following symbol may be written to change the current tick rate,
++ * it is read by the interrupt handler and used to reload the timer.
++ * The 'real' value (the one in use) is 'board_tick_rate' above.
++ * NOTE: this can be tweaked to match the actual crystal on a particular
++ * machine.
++ */
++volatile u32 ixp4xx_board_tick_rate = 66666600;
++EXPORT_SYMBOL(ixp4xx_board_tick_rate);
++
++/* The set API may run asynchronously in the presence of interrupts,
++ * everything it does it is both atomic and complete (notice that it
++ * doesn't change any of the 'volatile' values). The mathematics in
++ * here require the following values. Changing the board tick rate
++ * implies an unknown error in the current timestamp tick count.
++ */
++#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1
++# error unexpected value for timer reload mask
++#endif
++static void set_board_tick_rate(u32 rate) {
++ u32 reload;
++
++ /* Store the two effectively informational rate values, the
++ * error calculation is (rate - count*HZ) (above), and rate
++ * is changed first, this can cause a temporary error which
++ * will be corrected on the next interrupt.
++ */
++ board_tick_rate = rate;
++ board_tick_per_1000 = (rate+500)/1000;
++
++ /* Calculate the correct value to load into the timer countdown
++ * register, the low two bits must be b01 (to enable the timer).
++ * Select the top bits to be as close to the desired value as
++ * possible.
++ *
++ * First find the best value, regardless of the low two bits -
++ * this is the value used in the interrupt calculation even though
++ * it cannot necessarily be set into the register.
++ */
++ timer_count = (rate + (HZ/2))/HZ;
++
++ /* Now the timer_ticks are being generated at this rate, calculate
++ * an appropriate value for the register. This stores a 30 bit
++ * value which gives a period of 4*x+1, we want:
++ *
++ * 4*x+1 = board_tick_rate/HZ
++ *
++ * This needs to be rounded to the closest 4*HZ value:
++ *
++ * x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ
++ * x = (board_tick_rate+HZ) / (4*HZ);
++ */
++ reload = (board_tick_rate + HZ) / HZ;
++ reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
++ *IXP4XX_OSRT1 = reload;
+
+-static unsigned volatile last_jiffy_time;
++ /* If the clock is drifing, look in syslog: */
++ printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload);
++}
+
+-#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
++/* This returns the time in timer ticks since the 'last_timer_time'
++ * recorded above. Use this to avoid arithmetic errors because of
++ * the overflow when the timer wraps.
++ */
++static inline u32 ixp4xx_timer_delta(void)
++{
++ return *IXP4XX_OSTS - last_timer_time;
++}
+
+ /* IRQs are disabled before entering here from do_gettimeofday() */
+ static unsigned long ixp4xx_gettimeoffset(void)
+ {
+- u32 elapsed;
+-
+- elapsed = *IXP4XX_OSTS - last_jiffy_time;
++ /* Return the offset of the current time from the last time
++ * timer tick in microseconds. This is only used for the
++ * gettimeofday call.
++ *
++ * The result of this API is at most about 20000 (for a 50Hz
++ * HZ - 20000 uS/tick), the input delta is at most about
++ * 1.3M - 21 bits.
++ */
++ u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */
++ /* return delta * 1000000 / board_tick_rate; */
++ return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000;
++}
+
+- return elapsed / CLOCK_TICKS_PER_USEC;
++/* This is the correct adjustment to the counter to compensate for an
++ * error iff timer_count-1 <= exact_count <= timer_count+1
++ */
++static inline int adjustment(int error) {
++ if (error >= HZ)
++ return 1;
++ else if (error <= -HZ)
++ return -1;
++ return 0;
+ }
+
+ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+ {
++ u32 rate;
++ u32 count;
++ int error;
++
+ write_seqlock(&xtime_lock);
+
+ /* Clear Pending Interrupt by writing '1' to it */
+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
+
++ /* If the board tick rate has been changed update the cached
++ * value.
++ */
++ if (ixp4xx_board_tick_rate != board_tick_rate) {
++ set_board_tick_rate(ixp4xx_board_tick_rate);
++ accumulated_error = 0;
++ }
++
+ /*
+ * Catch up with the real idea of time
++ *
++ * board_tick_rate: actual ixp4xx ticks/second, read-only
++ * accumulated_error: aggregate error/tick * HZ, read/write
++ * timer_count: best ixp4xx ticks per timer_tick, read-only
+ */
+- while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
++ rate = board_tick_rate;
++ error = accumulated_error;
++ count = timer_count;
++ do {
++ u32 adjusted_count = count + adjustment(error);
++ if (ixp4xx_timer_delta() < adjusted_count)
++ break;
+ timer_tick(regs);
+- last_jiffy_time += LATCH;
+- }
++ last_timer_time += adjusted_count;
++ error += rate - adjusted_count*HZ;
++ } while (1);
++ accumulated_error = error;
+
+ write_sequnlock(&xtime_lock);
+
+@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq
+ .handler = ixp4xx_timer_interrupt,
+ };
+
++u32 ixp4xx_get_board_tick_rate(void) {
++ return board_tick_rate;
++}
++
++EXPORT_SYMBOL(ixp4xx_get_board_tick_rate);
++
++void ixp4xx_set_board_tick_rate(u32 rate) {
++ ixp4xx_board_tick_rate = rate;
++}
++
++EXPORT_SYMBOL(ixp4xx_set_board_tick_rate);
++
+ static void __init ixp4xx_timer_init(void)
+ {
+ /* Clear Pending Interrupt by writing '1' to it */
+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
+
+ /* Setup the Timer counter value */
+- *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
++ set_board_tick_rate(ixp4xx_board_tick_rate);
+
+ /* Reset time-stamp counter */
+ *IXP4XX_OSTS = 0;
+- last_jiffy_time = 0;
++ last_timer_time = 0;
++ accumulated_error = 0;
+
+ /* Connect the interrupt handler and enable the interrupt */
+ setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
+@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void)
+ ARRAY_SIZE(ixp46x_devices));
+ }
+ }
+-
+--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
+@@ -119,6 +119,11 @@ static void nslu2_power_off(void)
+
+ static void __init nslu2_init(void)
+ {
++ /* The NSLU2 has a 33MHz crystal on board - 1.01% different
++ * from the typical value.
++ */
++ ixp4xx_set_board_tick_rate(66000000);
++
+ ixp4xx_sys_init();
+
+ pm_power_off = nslu2_power_off;
+--- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
+@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input
+ }
+
+ if (value > 20 && value < 32767)
+- count = (NSLU2_FREQ / (value*4)) - 1;
++ count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1;
+
+ spin_lock_irqsave(&beep_lock, flags);
+
+--- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
+@@ -38,11 +38,6 @@
+ #define NSLU2_PCI_INTD_PIN 8
+
+
+-/* NSLU2 Timer */
+-#define NSLU2_FREQ 66000000
+-#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+-#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
+-
+ /* GPIO */
+
+ #define NSLU2_GPIO0 0
+--- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
+@@ -6,10 +6,23 @@
+ #include <asm/hardware.h>
+
+ /*
+- * We use IXP425 General purpose timer for our timer needs, it runs at
+- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
+- * timer register ignores the bottom 2 bits of the LATCH value.
++ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and
++ * is the number of internal counts per timer interrupt. Thus
++ * CLOCK_TICK_RATE is LATCH*HZ.
++ *
++ * The actual values of these numbers do not matter, because they
++ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed
++ * point number), so the value here gives a LATCH of 1 and pretty
++ * much guarantees to flush out any off-by-one errors.
++ *
++ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of
++ * HZ, this is checked in the ixp4xx/common.c code.
+ */
+-#define FREQ 66666666
+-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
++#define CLOCK_TICK_RATE HZ
+
++/* The following allow the exact board tick rate to be set and
++ * discovered. The value should be exactly twice the frequency
++ * (in Hz) of the onboard crystal.
++ */
++extern u32 ixp4xx_get_board_tick_rate(void);
++extern void ixp4xx_set_board_tick_rate(u32 new_rate);
--- /dev/null
+--- linux-2.6.14-rc5/include/linux/spinlock_up.h 2005-10-26 08:37:20.164248408 -0700
++++ patched/include/linux/spinlock_up.h 2005-10-26 12:15:13.458898975 -0700
+@@ -47,6 +47,14 @@ static inline void __raw_spin_unlock(raw
+ lock->slock = 1;
+ }
+
++#else /* DEBUG_SPINLOCK */
++#define __raw_spin_is_locked(lock) ((void)(lock), 0)
++/* for sched.c and kernel_lock.c: */
++# define __raw_spin_lock(lock) do { (void)(lock); } while (0)
++# define __raw_spin_unlock(lock) do { (void)(lock); } while (0)
++# define __raw_spin_trylock(lock) ({ (void)(lock); 1; })
++#endif /* DEBUG_SPINLOCK */
++
+ /*
+ * Read-write spinlocks. No debug version.
+ */
+@@ -57,14 +65,6 @@ static inline void __raw_spin_unlock(raw
+ #define __raw_read_unlock(lock) do { (void)(lock); } while (0)
+ #define __raw_write_unlock(lock) do { (void)(lock); } while (0)
+
+-#else /* DEBUG_SPINLOCK */
+-#define __raw_spin_is_locked(lock) ((void)(lock), 0)
+-/* for sched.c and kernel_lock.c: */
+-# define __raw_spin_lock(lock) do { (void)(lock); } while (0)
+-# define __raw_spin_unlock(lock) do { (void)(lock); } while (0)
+-# define __raw_spin_trylock(lock) ({ (void)(lock); 1; })
+-#endif /* DEBUG_SPINLOCK */
+-
+ #define __raw_read_can_lock(lock) (((void)(lock), 1))
+ #define __raw_write_can_lock(lock) (((void)(lock), 1))
+
--- /dev/null
+--- linux-2.6.14-rc5/net/ipv4/route.c 2005-10-26 08:37:20.752285410 -0700
++++ patched/net/ipv4/route.c 2005-10-26 12:17:00.761651111 -0700
+@@ -231,7 +231,7 @@ static spinlock_t *rt_hash_locks;
+ spin_lock_init(&rt_hash_locks[i]); \
+ }
+ #else
+-# define rt_hash_lock_addr(slot) NULL
++# define rt_hash_lock_addr(slot) ((spinlock_t*)NULL)
+ # define rt_hash_lock_init()
+ #endif
+
--- /dev/null
+diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Kconfig test9/drivers/i2c/chips/Kconfig
+--- linux-2.6.14-rc3/drivers/i2c/chips/Kconfig 2005-10-01 13:46:50.000000000 +0200
++++ test9/drivers/i2c/chips/Kconfig 2005-10-03 16:10:22.000000000 +0200
+@@ -126,4 +126,13 @@
+ This driver can also be built as a module. If so, the module
+ will be called max6875.
+
++config SENSORS_X1205
++ tristate "Xicor X1205 RTC chip"
++ depends on I2C
++ help
++ If you say yes here you get support for the Xicor X1205 RTC chip.
++
++ This driver can also be built as a module. If so, the module
++ will be called x1205
++
+ endmenu
+diff -urN linux-2.6.14-rc3/drivers/i2c/chips/Makefile test9/drivers/i2c/chips/Makefile
+--- linux-2.6.14-rc3/drivers/i2c/chips/Makefile 2005-09-17 12:42:33.000000000 +0200
++++ test9/drivers/i2c/chips/Makefile 2005-10-01 15:30:06.000000000 +0200
+@@ -13,6 +13,7 @@
+ obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o
+ obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
+ obj-$(CONFIG_TPS65010) += tps65010.o
++obj-$(CONFIG_SENSORS_X1205) += x1205.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff -urN linux-2.6.14-rc3/drivers/i2c/chips/x1205.c test9/drivers/i2c/chips/x1205.c
+--- linux-2.6.14-rc3/drivers/i2c/chips/x1205.c 1970-01-01 01:00:00.000000000 +0100
++++ test9/drivers/i2c/chips/x1205.c 2005-10-03 16:02:57.000000000 +0200
+@@ -0,0 +1,612 @@
++/*
++ * linux/drivers/i2c/chips/x1205.c
++ *
++ * x1205.c - An 12c driver for the Xicor X1205 RTC
++ * Copyright 2004 Karen Spearel
++ * Copyright 2005 Alessandro Zummo
++ *
++ * please send all reports to:
++ * kas11 at tampabay dot rr dot com
++ * a dot zummo at towertech dot it
++ *
++ * based on the other drivers in this same directory.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/string.h>
++#include <linux/bcd.h>
++#include <linux/rtc.h>
++#include <linux/list.h>
++
++#include <linux/x1205.h>
++
++#define EPOCH_1900 1900
++#define EPOCH_1970 1970
++
++#define DRIVER_VERSION "0.9.6"
++#define DRIVER_NAME (x1205_driver.name)
++
++
++/* Addresses to scan */
++static unsigned short normal_i2c[] = { X1205_I2C_BUS_ADDR, I2C_CLIENT_END };
++
++/* Insmod parameters */
++I2C_CLIENT_INSMOD;
++I2C_CLIENT_MODULE_PARM(hctosys,
++ "Set the system time from the hardware clock upon initialization");
++
++/* Prototypes */
++
++static int x1205_attach(struct i2c_adapter *adapter);
++static int x1205_detach(struct i2c_client *client);
++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
++static int x1205_validate_client(struct i2c_client *client);
++
++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
++ u8 reg_base);
++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
++ int datetoo, u8 reg_base);
++static int x1205_validate_tm(struct rtc_time *tm);
++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *arg);
++static int x1205_hctosys(struct i2c_client *client);
++
++
++static struct i2c_driver x1205_driver = {
++ .owner = THIS_MODULE,
++ .name = "x1205",
++ .flags = I2C_DF_NOTIFY,
++ .attach_adapter = &x1205_attach,
++ .detach_client = &x1205_detach,
++/* .command = &x1205_command,*/
++};
++
++struct x1205_data {
++ struct i2c_client client;
++ struct list_head list;
++ unsigned int epoch;
++};
++
++
++static const unsigned char days_in_mo[] =
++{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
++
++static LIST_HEAD(x1205_clients);
++
++/* Workaround until the I2C subsytem will allow to send
++ * commands to a specific client. This function will send the command
++ * to the first client.
++ */
++
++int x1205_do_command(unsigned int cmd, void *arg)
++{
++ struct list_head *walk;
++ struct list_head *tmp;
++ struct x1205_data *data;
++
++ list_for_each_safe(walk, tmp, &x1205_clients) {
++ data = list_entry(walk, struct x1205_data, list);
++ return x1205_command(&data->client, cmd, arg);
++ }
++
++ return -ENODEV;
++}
++
++
++/*
++ * in the routines that deal directly with the x1205 hardware, we use
++ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
++ * Epoch is inited as 2000. Time is set to UT
++ */
++
++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
++ u8 reg_base)
++{
++ static unsigned char dt_addr[] = { 0, };
++ static unsigned char sr_addr[] = { 0, };
++
++ unsigned char buf[8], sr;
++
++ struct i2c_msg msgs[] = {
++ { client->addr, 0, 2, sr_addr }, /* random read */
++ { client->addr, I2C_M_RD, 1, &sr },
++ { client->addr, 0, 2, dt_addr }, /* random read */
++ { client->addr, I2C_M_RD, 8, buf },
++ };
++
++ struct x1205_data *xdata = i2c_get_clientdata(client);
++
++ dt_addr[1] = reg_base;
++ sr_addr[1] = X1205_REG_SR;
++
++ if ((i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs))) ==
++ ARRAY_SIZE(msgs)) {
++ /* did we read the correct number of messages? */
++
++ /* check for battery failure */
++ if (sr & X1205_SR_RTCF)
++ {
++ dev_info(&client->adapter->dev,
++ "%s: Clock had a power failure, you must set the date.\n",
++ DRIVER_NAME);
++
++ return -EINVAL;
++ }
++
++ dev_dbg(&client->dev,
++ "%s: raw read data - sec-%02x min-%02x hr-%02x"
++ " mday-%02x mon-%02x year-%02x wday-%02x y2k-%02x\n",
++ __FUNCTION__,
++ buf[0], buf[1], buf[2], buf[3],
++ buf[4], buf[5], buf[6], buf[7]);
++
++ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
++ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
++ buf[CCR_HOUR] &= ~X1205_HR_MIL;
++ tm->tm_hour = BCD2BIN(buf[CCR_HOUR]); /* hr is 0-23 */
++ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
++ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
++ xdata->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
++ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + xdata->epoch - EPOCH_1900;
++ tm->tm_wday = buf[CCR_WDAY];
++
++ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
++ "mday=%d, mon=%d, year=%d, wday=%d\n",
++ __FUNCTION__,
++ tm->tm_sec, tm->tm_min, tm->tm_hour,
++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
++
++ } else {
++ dev_dbg(&client->dev, "%s: read error\n", __FUNCTION__);
++ return -EIO;
++ }
++
++ return 0;
++}
++
++
++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
++ int datetoo, u8 reg_base)
++{
++ int i, err, xfer;
++
++ static unsigned char wel[3] = { 0, X1205_REG_SR,
++ X1205_SR_WEL };
++
++
++ static unsigned char rwel[3] = { 0, X1205_REG_SR,
++ X1205_SR_WEL | X1205_SR_RWEL };
++
++ static unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
++
++ static unsigned char data[3] = { 0, };
++ static unsigned char buf[8];
++
++ struct x1205_data *xdata = i2c_get_clientdata(client);
++
++ if ((err = x1205_validate_tm(tm)) < 0)
++ return err;
++
++ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
++ "mday=%d, mon=%d, year=%d, wday=%d\n",
++ __FUNCTION__,
++ tm->tm_sec, tm->tm_min, tm->tm_hour,
++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
++
++
++ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
++ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
++
++ /* Set 24HR format */
++ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
++
++ if (datetoo == X1205_DATETOO) {
++ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
++
++ /* month, 0 - 11 */
++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); /* input is 0-11 */
++
++ /* year, since 1900 */
++ buf[CCR_YEAR] = BIN2BCD((tm->tm_year + EPOCH_1900 - xdata->epoch));
++ buf[CCR_WDAY] = tm->tm_wday & 7;
++ buf[CCR_Y2K] = BIN2BCD(xdata->epoch / 100);
++ }
++
++ xfer = i2c_master_send(client, wel, 3);
++ dev_dbg(&client->dev, "%s: wen - %x\n", __FUNCTION__, xfer);
++ if (xfer != 3)
++ return -EIO;
++
++ xfer = i2c_master_send(client, rwel, 3);
++ dev_dbg(&client->dev, "%s: wenb - %x\n", __FUNCTION__, xfer);
++ if (xfer != 3)
++ return -EIO;
++
++ for (i = 0; i < 8; i++) {
++ data[1] = i + reg_base;
++ data[2] = buf[i];
++ xfer = i2c_master_send(client, data, 3);
++
++ dev_dbg(&client->dev, "%s: xfer %d addr, %02x, data %02x\n",
++ __FUNCTION__,
++ xfer, data[1], data[2]);
++
++ if (xfer != 3)
++ return -EIO;
++ };
++
++ xfer = i2c_master_send(client, diswe, 3);
++ dev_dbg(&client->dev, "%s: wdis - %x\n", __FUNCTION__, xfer);
++ if (xfer != 3)
++ return -EIO;
++
++ return 0;
++}
++
++static int x1205_hctosys(struct i2c_client *client)
++{
++ int err;
++
++ struct rtc_time tm;
++ struct timespec tv;
++
++
++ err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
++
++ if (err)
++ {
++ dev_info(&client->adapter->dev,
++ "%s: Unable to set the system clock\n",
++ DRIVER_NAME);
++
++ return err;
++
++ }
++
++ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary whether
++ * it stores the most close value or the value with partial seconds
++ * truncated, however it is important for x1205_sync_rtc that it be
++ * defined to store the truncated value. This is because otherwise it
++ * is necessary to read both xtime.tv_sec and xtime.tv_nsec in the
++ * sync function, and atomic reads of >32bits on ARM are not possible.
++ * So storing the most close value would slow down the sync API. So
++ * Here we have the truncated value and the best guess is to add 0.5s
++ */
++
++ tv.tv_nsec = NSEC_PER_SEC >> 1;
++
++ /* WARNING: this is not the C library 'mktime' call, it is a built in
++ * inline function from include/linux/time.h. It expects (requires)
++ * the month to be in the range 1-12
++ */
++
++ tv.tv_sec = mktime(tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
++ tm.tm_mday, tm.tm_hour,
++ tm.tm_min, tm.tm_sec);
++
++ do_settimeofday(&tv);
++
++ dev_info(&client->adapter->dev,
++ "%s: Setting the system clock to %d-%d-%d %d:%d:%d\n",
++ DRIVER_NAME,
++ tm.tm_year + EPOCH_1900, tm.tm_mon + 1,
++ tm.tm_mday, tm.tm_hour, tm.tm_min,
++ tm.tm_sec);
++
++ return 0;
++}
++
++struct x1205_limit
++{
++ unsigned char reg;
++ unsigned char mask;
++ unsigned char min;
++ unsigned char max;
++};
++
++static int x1205_validate_client(struct i2c_client *client)
++{
++ int i, xfer;
++
++ /* Probe array. We will read the register at the specified
++ * address and check if the given bits are zero.
++ */
++
++ const unsigned char probe_zero_pattern[] = {
++
++ X1205_REG_SR, 0x18,
++ X1205_REG_Y2K, 0xC6,
++ X1205_REG_DW, 0xF8,
++ X1205_REG_MO, 0xE0,
++ X1205_REG_DT, 0xC0,
++ X1205_REG_HR, 0x40,
++ X1205_REG_MN, 0x80,
++ X1205_REG_SC, 0x80,
++ X1205_REG_DTR, 0xF8,
++ X1205_REG_ATR, 0xC0,
++ X1205_REG_INT, 0x18,
++ X1205_REG_0, 0xFF,
++ X1205_REG_Y2K1, 0xC6,
++ X1205_REG_DWA1, 0x78,
++ X1205_REG_MOA1, 0x60,
++ X1205_REG_DTA1, 0x40,
++ X1205_REG_HRA1, 0x40,
++ X1205_REG_Y2K0, 0xC6,
++ X1205_REG_DWA0, 0x78,
++ X1205_REG_MOA0, 0x60,
++ X1205_REG_DTA0, 0x40,
++ X1205_REG_HRA0, 0x40,
++ };
++
++ const struct x1205_limit probe_limits_pattern[] = {
++ /* register, mask, min, max */
++ { X1205_REG_Y2K, 0xFF, 19, 20 },
++ { X1205_REG_DW, 0xFF, 0, 6 },
++ { X1205_REG_YR, 0xFF, 0, 99 },
++ { X1205_REG_MO, 0xFF, 0, 12 },
++ { X1205_REG_DT, 0xFF, 0, 31 },
++ { X1205_REG_HR, 0x7F, 0, 23 },
++ { X1205_REG_MN, 0xFF, 0, 59 },
++ { X1205_REG_SC, 0xFF, 0, 59 },
++ { X1205_REG_Y2K1, 0xFF, 19, 20 },
++ { X1205_REG_DWA1, 0x7F, 0, 6 },
++ { X1205_REG_MOA1, 0x7F, 0, 12 },
++ { X1205_REG_DTA1, 0x7F, 0, 31 },
++ { X1205_REG_HRA1, 0x7F, 0, 23 },
++ { X1205_REG_MNA1, 0x7F, 0, 59 },
++ { X1205_REG_SCA1, 0x7F, 0, 59 },
++ { X1205_REG_Y2K0, 0xFF, 19, 20 },
++ { X1205_REG_DWA0, 0x7F, 0, 6 },
++ { X1205_REG_MOA0, 0x7F, 0, 12 },
++ { X1205_REG_DTA0, 0x7F, 0, 31 },
++ { X1205_REG_HRA0, 0x7F, 0, 23 },
++ { X1205_REG_MNA0, 0x7F, 0, 59 },
++ { X1205_REG_SCA0, 0x7F, 0, 59 },
++ };
++
++ /* check that registers have bits a 0 where expected */
++
++ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2)
++ {
++ unsigned char buf;
++
++ static unsigned char addr[2];
++
++ struct i2c_msg msgs[2] = {
++ { client->addr, 0, 2, addr }, /* random read */
++ { client->addr, I2C_M_RD, 1, &buf },
++ };
++
++ addr[0] = 0x00;
++ addr[1] = probe_zero_pattern[i];
++
++ xfer = i2c_transfer(client->adapter, msgs, 2);
++
++ if (xfer != 2) {
++ dev_dbg(&client->adapter->dev,
++ "%s: could not read register %x\n",
++ __FUNCTION__, addr[1]);
++
++ return -EIO;
++ }
++
++ if ((buf & probe_zero_pattern[i+1]) != 0) {
++ dev_dbg(&client->adapter->dev,
++ "%s: register %x, zero pattern %d: %x\n",
++ __FUNCTION__, addr[1], i, buf);
++
++ return -ENODEV;
++ }
++ }
++
++ /* check limits */
++
++ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++)
++ {
++ unsigned char buf, val;
++
++ static unsigned char addr[2];
++
++ struct i2c_msg msgs[2] = {
++ { client->addr, 0, 2, addr }, /* random read */
++ { client->addr, I2C_M_RD, 1, &buf },
++ };
++
++ addr[0] = 0x00;
++ addr[1] = probe_limits_pattern[i].reg;
++
++ xfer = i2c_transfer(client->adapter, msgs, 2);
++
++ if (xfer != 2) {
++ dev_dbg(&client->adapter->dev,
++ "%s: could not read register %x\n",
++ __FUNCTION__, addr[1]);
++
++ return -EIO;
++ }
++
++ val = BCD2BIN(buf & probe_limits_pattern[i].mask);
++
++ if (val > probe_limits_pattern[i].max ||
++ val < probe_limits_pattern[i].min) {
++ dev_dbg(&client->adapter->dev,
++ "%s: register %x, lim pattern %d: %d\n",
++ __FUNCTION__, addr[1], i, val);
++
++ return -ENODEV;
++ }
++ }
++
++ return 0;
++}
++
++static int x1205_attach(struct i2c_adapter *adapter)
++{
++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
++
++ return i2c_probe(adapter, &addr_data, x1205_probe);
++}
++
++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
++{
++ struct i2c_client *new_client;
++ struct x1205_data *xdata;
++
++ int err = 0;
++
++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
++
++ if (!(xdata = kmalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
++ err = -ENOMEM;
++ goto exit;
++ }
++
++ /* Fill our data structure */
++
++ memset(xdata, 0, sizeof(struct x1205_data));
++
++ xdata->epoch = 2000;
++
++
++ /* Prepare i2c_client structure */
++
++ new_client = &xdata->client;
++ i2c_set_clientdata(new_client, xdata);
++ new_client->addr = address;
++ new_client->adapter = adapter;
++ new_client->driver = &x1205_driver;
++ new_client->flags = 0;
++
++ strlcpy(new_client->name, "x1205", I2C_NAME_SIZE);
++
++
++ /* Verify the chip is really an X1205 */
++
++ if (kind < 0)
++ {
++ if (x1205_validate_client(new_client) < 0) {
++ err = -ENODEV;
++ goto exit_kfree;
++ }
++ }
++
++ /* Inform the i2c layer */
++ if ((err = i2c_attach_client(new_client)))
++ goto exit_kfree;
++
++ list_add(&xdata->list, &x1205_clients);
++
++ dev_info(&adapter->dev, "%s: Chip found, driver " DRIVER_VERSION "\n",
++ DRIVER_NAME);
++
++ /* If requested, se the system time */
++ if (hctosys)
++ x1205_hctosys(new_client);
++
++ return 0;
++
++exit_kfree:
++ kfree(xdata);
++
++exit:
++ return err;
++}
++
++static int x1205_detach(struct i2c_client *client)
++{
++ int err;
++ struct x1205_data *data = i2c_get_clientdata(client);
++
++ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
++
++ if ((err = i2c_detach_client(client)))
++ return err;
++
++ list_del(&data->list);
++ kfree(data);
++ return 0;
++}
++
++/* make sure the rtc_time values are in bounds */
++static int x1205_validate_tm(struct rtc_time *tm)
++{
++ tm->tm_year += 1900;
++
++ if (tm->tm_year < EPOCH_1970)
++ return -EINVAL;
++
++ if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
++ return -EINVAL;
++
++ if (tm->tm_mday > (days_in_mo[tm->tm_mon] + ( (tm->tm_mon == 1) &&
++ ((!(tm->tm_year % 4) && (tm->tm_year % 100) ) || !(tm->tm_year % 400)))))
++ return -EINVAL;
++
++ if ((tm->tm_year -= EPOCH_1900) > 255)
++ return -EINVAL;
++
++ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
++ return -EINVAL;
++
++ return 0;
++}
++
++static int x1205_command(struct i2c_client *client, unsigned int cmd, void *tm)
++{
++ if (client == NULL || tm == NULL)
++ return -EINVAL;
++
++ if (!capable(CAP_SYS_TIME))
++ return -EACCES;
++
++ dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
++
++ switch (cmd) {
++ case X1205_CMD_GETDATETIME:
++ return x1205_get_datetime(client, tm, X1205_CCR_BASE);
++
++ case X1205_CMD_SETTIME:
++ return x1205_set_datetime(client, tm, X1205_NODATE, X1205_CCR_BASE);
++
++ case X1205_CMD_SETDATETIME:
++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_CCR_BASE);
++
++ case X1205_CMD_GETALARM:
++ return x1205_get_datetime(client, tm, X1205_ALM0_BASE);
++
++ case X1205_CMD_SETALARM:
++ return x1205_set_datetime(client, tm, X1205_DATETOO, X1205_ALM0_BASE);
++
++ default:
++ return -EINVAL;
++ }
++}
++
++
++static int __init x1205_init(void)
++{
++ return i2c_add_driver(&x1205_driver);
++}
++
++static void __exit x1205_exit(void)
++{
++ i2c_del_driver(&x1205_driver);
++}
++
++MODULE_AUTHOR(
++ "Karen Spearel <kas11@tampabay.rr.com>, "
++ "Alessandro Zummo <a.zummo@towertech.it>");
++MODULE_DESCRIPTION("Xicor X1205 RTC driver");
++MODULE_LICENSE("GPL");
++
++EXPORT_SYMBOL_GPL(x1205_do_command);
++
++module_init(x1205_init);
++module_exit(x1205_exit);
+--- linux-2.6.14-rc3/include/linux/x1205.h 1970-01-01 01:00:00.000000000 +0100
++++ test9/include/linux/x1205.h 2005-10-03 15:38:21.000000000 +0200
+@@ -0,0 +1,67 @@
++
++/* commands */
++
++#define X1205_CMD_GETDATETIME 0
++#define X1205_CMD_SETTIME 1
++#define X1205_CMD_SETDATETIME 2
++#define X1205_CMD_GETALARM 3
++#define X1205_CMD_SETALARM 4
++
++/* flags */
++
++#define X1205_NODATE 0
++#define X1205_DATETOO 1
++
++/* offsets into read buf - add 2 for write buf */
++
++#define CCR_SEC 0
++#define CCR_MIN 1
++#define CCR_HOUR 2
++#define CCR_MDAY 3
++#define CCR_MONTH 4
++#define CCR_YEAR 5
++#define CCR_WDAY 6
++#define CCR_Y2K 7
++
++#define X1205_REG_SR 0x3F /* status register */
++#define X1205_REG_Y2K 0x37
++#define X1205_REG_DW 0x36
++#define X1205_REG_YR 0x35
++#define X1205_REG_MO 0x34
++#define X1205_REG_DT 0x33
++#define X1205_REG_HR 0x32
++#define X1205_REG_MN 0x31
++#define X1205_REG_SC 0x30
++#define X1205_REG_DTR 0x13
++#define X1205_REG_ATR 0x12
++#define X1205_REG_INT 0x11
++#define X1205_REG_0 0x10
++#define X1205_REG_Y2K1 0x0F
++#define X1205_REG_DWA1 0x0E
++#define X1205_REG_YRA1 0x0D
++#define X1205_REG_MOA1 0x0C
++#define X1205_REG_DTA1 0x0B
++#define X1205_REG_HRA1 0x0A
++#define X1205_REG_MNA1 0x09
++#define X1205_REG_SCA1 0x08
++#define X1205_REG_Y2K0 0x07
++#define X1205_REG_DWA0 0x06
++#define X1205_REG_YRA0 0x05
++#define X1205_REG_MOA0 0x04
++#define X1205_REG_DTA0 0x03
++#define X1205_REG_HRA0 0x02
++#define X1205_REG_MNA0 0x01
++#define X1205_REG_SCA0 0x00
++
++#define X1205_I2C_BUS_ADDR 0x6f /* hardwired into x1205 */
++#define X1205_CCR_BASE 0x30 /* Base address of CCR */
++#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
++
++#define X1205_SR_RTCF 0x01
++#define X1205_SR_WEL 0x02 /* Write Enable Latch bit */
++#define X1205_SR_RWEL 0x04 /* Register Write Enable Bit */
++
++#define X1205_HR_MIL 0x80 /* set in ccr.hour for 24 hr mode */
++
++extern int x1205_do_command(unsigned int cmd, void *arg);
++
--- /dev/null
+--- linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
+@@ -8,6 +8,16 @@ menu "Intel IXP4xx Implementation Option
+
+ comment "IXP4xx Platforms"
+
++# This entry is placed on top because otherwise it would have
++# been shown as a submenu.
++config MACH_NSLU2
++ bool
++ prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
++ help
++ Say 'Y' here if you want your kernel to support Linksys's
++ NSLU2 NAS device. For more information on this platform,
++ see http://www.nslu2-linux.org
++
+ config ARCH_AVILA
+ bool "Avila"
+ help
+--- linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
+@@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
+ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
+ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
+
+--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-pci.c 1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,77 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-pci.c
++ *
++ * NSLU2 board-level PCI initialization
++ *
++ * based on ixdp425-pci.c:
++ * Copyright (C) 2002 Intel Corporation.
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * Maintainer: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++
++#include <asm/mach/pci.h>
++#include <asm/mach-types.h>
++
++void __init nslu2_pci_preinit(void)
++{
++ set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
++ set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
++ set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
++
++ gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
++ gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
++ gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
++
++ /* INTD is not configured as GPIO is used
++ * for the power input button.
++ */
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
++ IRQ_NSLU2_PCI_INTA,
++ IRQ_NSLU2_PCI_INTB,
++ IRQ_NSLU2_PCI_INTC,
++ };
++
++ int irq = -1;
++
++ if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
++ pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
++ irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES];
++ }
++
++ return irq;
++}
++
++struct hw_pci __initdata nslu2_pci = {
++ .nr_controllers = 1,
++ .preinit = nslu2_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = nslu2_map_irq,
++};
++
++int __init nslu2_pci_init(void) /* monkey see, monkey do */
++{
++ if (machine_is_nslu2())
++ pci_common_init(&nslu2_pci);
++
++ return 0;
++}
++
++subsys_initcall(nslu2_pci_init);
+--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-power.c 1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,92 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-power.c
++ *
++ * NSLU2 Power/Reset driver
++ *
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * based on nslu2-io.c
++ * Copyright (C) 2004 Karen Spearel
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/reboot.h>
++#include <linux/interrupt.h>
++
++#include <asm/mach-types.h>
++
++extern void ctrl_alt_del(void);
++
++static irqreturn_t nslu2_power_handler(int irq, void *dev_id, struct pt_regs *regs)
++{
++ /* Signal init to do the ctrlaltdel action, this will bypass init if
++ * it hasn't started and do a kernel_restart.
++ */
++ ctrl_alt_del();
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t nslu2_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
++{
++ /* This is the paper-clip reset, it shuts the machine down directly.
++ */
++ machine_power_off();
++
++ return IRQ_HANDLED;
++}
++
++static int __init nslu2_power_init(void)
++{
++ if (!(machine_is_nslu2()))
++ return 0;
++
++ *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */
++
++ set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
++ set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
++
++ gpio_line_isr_clear(NSLU2_RB_GPIO);
++ gpio_line_isr_clear(NSLU2_PB_GPIO);
++
++ if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
++ SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
++
++ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
++ NSLU2_RB_IRQ);
++
++ return -EIO;
++ }
++
++ if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
++ SA_INTERRUPT, "NSLU2 power button", NULL) < 0) {
++
++ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
++ NSLU2_PB_IRQ);
++
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static void __exit nslu2_power_exit(void)
++{
++ free_irq(NSLU2_RB_IRQ, NULL);
++ free_irq(NSLU2_PB_IRQ, NULL);
++}
++
++module_init(nslu2_power_init);
++module_exit(nslu2_power_exit);
++
++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
++MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
++MODULE_LICENSE("GPL");
+--- linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,134 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-setup.c
++ *
++ * NSLU2 board-setup
++ *
++ * based ixdp425-setup.c:
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * Author: Mark Rakes <mrakes at mac.com>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * Fixed missing init_time in MACHINE_START kas11 10/22/04
++ * Changed to conform to new style __init ixdp425 kas11 10/22/04
++ */
++
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data nslu2_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource nslu2_flash_resource = {
++ .start = NSLU2_FLASH_BASE,
++ .end = NSLU2_FLASH_BASE + NSLU2_FLASH_SIZE,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device nslu2_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev.platform_data = &nslu2_flash_data,
++ .num_resources = 1,
++ .resource = &nslu2_flash_resource,
++};
++
++static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
++ .sda_pin = NSLU2_SDA_PIN,
++ .scl_pin = NSLU2_SCL_PIN,
++};
++
++static struct platform_device nslu2_i2c_controller = {
++ .name = "IXP4XX-I2C",
++ .id = 0,
++ .dev.platform_data = &nslu2_i2c_gpio_pins,
++ .num_resources = 0,
++};
++
++static struct resource nslu2_uart_resources[] = {
++ {
++ .start = IXP4XX_UART1_BASE_PHYS,
++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct plat_serial8250_port nslu2_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART1_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART1,
++ .flags = UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { }
++};
++
++static struct platform_device nslu2_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev.platform_data = nslu2_uart_data,
++ .num_resources = 2,
++ .resource = nslu2_uart_resources,
++};
++
++static struct platform_device *nslu2_devices[] __initdata = {
++ &nslu2_i2c_controller,
++ &nslu2_flash,
++ &nslu2_uart,
++};
++
++static void nslu2_power_off(void)
++{
++ /* This causes the box to drop the power and go dead. */
++
++ /* enable the pwr cntl gpio */
++ gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
++
++ /* do the deed */
++ gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
++}
++
++static void __init nslu2_init(void)
++{
++ ixp4xx_sys_init();
++
++ pm_power_off = nslu2_power_off;
++
++ platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
++}
++
++MACHINE_START(NSLU2, "Linksys NSLU2")
++ /* Maintainer: www.nslu2-linux.org */
++ .phys_ram = PHYS_OFFSET,
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
++ .boot_params = 0x00000100,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .init_machine = nslu2_init,
++MACHINE_END
+--- linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 1970-01-01 00:00:00.000000000 +0000
+@@ -44,5 +44,6 @@ extern unsigned int processor_id;
+ #include "ixdp425.h"
+ #include "coyote.h"
+ #include "prpmc1100.h"
++#include "nslu2.h"
+
+ #endif /* _ASM_ARCH_HARDWARE_H */
+--- linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 1970-01-01 00:00:00.000000000 +0000
+@@ -93,4 +93,11 @@
+ #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11
+ #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5
+
++/*
++ * NSLU2 board IRQs
++ */
++#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11
++#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10
++#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9
++
+ #endif
+--- linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,96 @@
++/*
++ * include/asm-arm/arch-ixp4xx/nslu2.h
++ *
++ * NSLU2 platform specific definitions
++ *
++ * Author: Mark Rakes <mrakes AT mac.com>
++ * Maintainers: http://www.nslu2-linux.org
++ *
++ * based on ixdp425.h:
++ * Copyright 2004 (c) MontaVista, Software, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#ifndef __ASM_ARCH_HARDWARE_H__
++#error "Do not include this directly, instead #include <asm/hardware.h>"
++#endif
++
++#define NSLU2_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS
++#define NSLU2_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE
++
++#define NSLU2_SDA_PIN 7
++#define NSLU2_SCL_PIN 6
++
++/*
++ * NSLU2 PCI IRQs
++ */
++#define NSLU2_PCI_MAX_DEV 3
++#define NSLU2_PCI_IRQ_LINES 3
++
++
++/* PCI controller GPIO to IRQ pin mappings */
++#define NSLU2_PCI_INTA_PIN 11
++#define NSLU2_PCI_INTB_PIN 10
++#define NSLU2_PCI_INTC_PIN 9
++#define NSLU2_PCI_INTD_PIN 8
++
++
++/* NSLU2 Timer */
++#define NSLU2_FREQ 66000000
++#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
++#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
++
++/* GPIO */
++
++#define NSLU2_GPIO0 0
++#define NSLU2_GPIO1 1
++#define NSLU2_GPIO2 2
++#define NSLU2_GPIO3 3
++#define NSLU2_GPIO4 4
++#define NSLU2_GPIO5 5
++#define NSLU2_GPIO6 6
++#define NSLU2_GPIO7 7
++#define NSLU2_GPIO8 8
++#define NSLU2_GPIO9 9
++#define NSLU2_GPIO10 10
++#define NSLU2_GPIO11 11
++#define NSLU2_GPIO12 12
++#define NSLU2_GPIO13 13
++#define NSLU2_GPIO14 14
++#define NSLU2_GPIO15 15
++
++/* Buttons */
++
++#define NSLU2_PB_GPIO NSLU2_GPIO5
++#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */
++#define NSLU2_RB_GPIO NSLU2_GPIO12
++
++#define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5
++#define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12
++
++#define NSLU2_PB_BM (1L << NSLU2_PB_GPIO)
++#define NSLU2_PO_BM (1L << NSLU2_PO_GPIO)
++#define NSLU2_RB_BM (1L << NSLU2_RB_GPIO)
++
++/* Buzzer */
++
++#define NSLU2_GPIO_BUZZ 4
++#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
++/* LEDs */
++
++#define NSLU2_LED_RED NSLU2_GPIO0
++#define NSLU2_LED_GRN NSLU2_GPIO1
++
++#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED)
++#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN)
++
++#define NSLU2_LED_DISK1 NSLU2_GPIO2
++#define NSLU2_LED_DISK2 NSLU2_GPIO3
++
++#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2)
++#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3)
++
++
--- /dev/null
+--- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.171472071 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:23:52.923187955 -0700
+@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
+ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
+ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
+-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o
+
+--- linux-2.6.13/.pc/55-nslu2-rtc.patch/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:19:43.443489188 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-rtc.c 2005-10-26 15:23:52.923187955 -0700
+@@ -0,0 +1,113 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-rtc.c
++ *
++ * NSLU2 RTC driver
++ *
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * based on x1205-rtc.c
++ * Copyright (C) 2004 Karen Spearel
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/time.h>
++#include <linux/rtc.h>
++#include <linux/init.h>
++
++#include <linux/x1205.h>
++
++#include <asm/rtc.h>
++#include <asm/mach-types.h>
++
++extern int (*set_rtc)(void);
++
++static int nslu2_set_rtc(void)
++{
++ struct rtc_time new_tm, old_tm;
++ unsigned long cur_secs = xtime.tv_sec;
++
++ if (x1205_do_command(X1205_CMD_GETDATETIME, &old_tm))
++ return 0;
++
++ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */
++ new_tm.tm_sec = cur_secs % 60;
++ cur_secs /= 60;
++ new_tm.tm_min = cur_secs % 60;
++ cur_secs /= 60;
++ new_tm.tm_hour = cur_secs % 24;
++
++ /*
++ * avoid writing when we're going to change the day
++ * of the month. We will retry in the next minute.
++ * This basically means that if the RTC must not drift
++ * by more than 1 minute in 11 minutes.
++ */
++ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
++ (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
++ return 1;
++
++ return x1205_do_command(X1205_CMD_SETTIME, &new_tm);
++}
++
++static int rtc_read_alarm(struct rtc_wkalrm *alrm)
++{
++ return x1205_do_command(X1205_CMD_GETALARM, &alrm->time);
++}
++
++static int rtc_set_alarm(struct rtc_wkalrm *alrm)
++{
++ return x1205_do_command(X1205_CMD_SETALARM, &alrm->time);
++}
++
++static int rtc_read_time(struct rtc_time *tm)
++{
++ return x1205_do_command(X1205_CMD_GETDATETIME, tm);
++}
++
++static int rtc_set_time(struct rtc_time *tm)
++{
++ return x1205_do_command(X1205_CMD_SETDATETIME, tm);
++}
++
++static struct rtc_ops rtc_ops = {
++ .owner = THIS_MODULE,
++ .read_time = rtc_read_time,
++ .set_time = rtc_set_time,
++ .read_alarm = rtc_read_alarm,
++ .set_alarm = rtc_set_alarm,
++};
++
++static int __init nslu2_rtc_init(void)
++{
++ int ret;
++
++ if (!(machine_is_nslu2()))
++ return 0;
++
++ printk(KERN_INFO "NSLU2: rtc\n");
++
++ if ((ret = register_rtc(&rtc_ops)) != 0)
++ return ret;
++
++ set_rtc = nslu2_set_rtc;
++
++ return 0;
++}
++
++static void __exit nslu2_rtc_exit(void)
++{
++ set_rtc = NULL;
++
++ unregister_rtc(&rtc_ops);
++}
++
++module_init(nslu2_rtc_init);
++module_exit(nslu2_rtc_exit);
--- /dev/null
+--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Kconfig 2005-08-28 16:41:01.000000000 -0700
++++ linux-2.6.13/drivers/input/misc/Kconfig 2005-10-26 15:24:01.199708764 -0700
+@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
+ tristate "M68k Beeper support"
+ depends on M68K
+
++config INPUT_NSLU2_BEEPER
++ tristate "NSLU2 Beeper support"
++ depends on MACH_NSLU2
++ help
++ Say Y here if you want the embedded beeper on the LinkSys NSLU2
++ to be used for bells and whistles.
++
++ If unsure, say Y.
++
++ To compile this driver as a module, choose M here: the
++ module will be called nslu2spkr.
++
+ config INPUT_UINPUT
+ tristate "User level driver support"
+ help
+--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/Makefile 2005-08-28 16:41:01.000000000 -0700
++++ linux-2.6.13/drivers/input/misc/Makefile 2005-10-26 15:24:01.199708764 -0700
+@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68ksp
+ obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o
+ obj-$(CONFIG_INPUT_UINPUT) += uinput.o
+ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
++obj-$(CONFIG_INPUT_NSLU2_BEEPER) += nslu2spkr.o
+--- linux-2.6.13/.pc/60-nslu2-beeper.patch/drivers/input/misc/nslu2spkr.c 2005-10-26 15:19:43.711506053 -0700
++++ linux-2.6.13/drivers/input/misc/nslu2spkr.c 2005-10-26 15:24:01.199708764 -0700
+@@ -0,0 +1,144 @@
++/*
++ * drivers/input/misc/nslu2spkr.c
++ *
++ * NSLU2 Beeper driver
++ *
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * based on nslu2-io.c
++ * Copyright (C) 2004 Karen Spearel
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/delay.h>
++
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++static unsigned int beep_on_startup = 1;
++module_param(beep_on_startup, bool, 0);
++MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup");
++
++DEFINE_SPINLOCK(beep_lock);
++
++static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
++{
++ unsigned int count = 0;
++ unsigned long flags;
++
++ if (type != EV_SND)
++ return -1;
++
++ switch (code) {
++ case SND_BELL:
++ if (value) value = 1000;
++ case SND_TONE:
++ break;
++ default:
++ return -1;
++ }
++
++ if (value > 20 && value < 32767)
++ count = (NSLU2_FREQ / (value*4)) - 1;
++
++ spin_lock_irqsave(&beep_lock, flags);
++
++ if (count) {
++
++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT);
++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW);
++
++ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
++
++ } else {
++
++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN);
++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH);
++
++ *IXP4XX_OSRT2 = 0;
++ }
++
++ spin_unlock_irqrestore(&beep_lock, flags);
++
++ return 0;
++}
++
++static struct input_dev nslu2_spkr_dev = {
++ .phys = "ixp420/gpio4",
++ .name = "NSLU2 Beeper",
++ .evbit[0] = BIT(EV_SND),
++ .sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE),
++ .event = nslu2_spkr_event,
++ .id = {
++ .bustype = BUS_HOST,
++ .vendor = 0x001f,
++ .product = 0x0001,
++ .version = 0x0100
++ }
++};
++
++static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs)
++{
++ /* clear interrupt */
++ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
++
++ /* flip the beeper output */
++ *IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM;
++
++ return IRQ_HANDLED;
++}
++
++static int __init nslu2_spkr_init(void)
++{
++ if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler,
++ SA_INTERRUPT | SA_TIMER, "NSLU2 beeper", NULL < 0)) {
++
++ printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n",
++ IRQ_IXP4XX_TIMER2);
++
++ return -EIO;
++ }
++
++ input_register_device(&nslu2_spkr_dev);
++
++ /* do a little beep to tell the world we are alive */
++ if (beep_on_startup)
++ {
++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440);
++ msleep(120);
++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0);
++ }
++
++ printk(KERN_INFO "NSLU2: beeper\n");
++ return 0;
++}
++
++static void __exit nslu2_spkr_exit(void)
++{
++ input_unregister_device(&nslu2_spkr_dev);
++
++ disable_irq(IRQ_IXP4XX_TIMER2);
++
++ /* turn it off */
++ nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0);
++
++ free_irq(IRQ_IXP4XX_TIMER2, NULL);
++}
++
++module_init(nslu2_spkr_init);
++module_exit(nslu2_spkr_exit);
++
++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
++MODULE_DESCRIPTION("NSLU2 Beeper driver");
++MODULE_LICENSE("GPL");
--- /dev/null
+--- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.443489188 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:08.652177718 -0700
+@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
+ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
+ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
+-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o
++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
+
+--- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:19:43.979522918 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-io.c 2005-10-26 15:24:08.652177718 -0700
+@@ -0,0 +1,548 @@
++//=============================================================================
++//
++// n2-io.c version 0.1.7
++// Author: Karen Spearel <kas11 at tampabay.rr.com>
++// please report problems/bugs directly to the address above
++//
++// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per
++// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk
++//
++// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD,
++// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT
++// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER
++// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS.
++//
++//=============================================================================
++// GPIO Function State
++// 0 Red LED Status
++// 1 Green LED Ready = 1
++// 2 Disk 2 LED On = 0
++// 3 Disk 1 LED On = 0
++// 4 Buzzer
++// 5 Power Button Pressed = 1
++// 8 Power Down Output = 1 powers down NSLU2
++// 12 Reset Pressed = 0
++
++#include <linux/config.h>
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/proc_fs.h>
++#include <linux/device.h>
++#include <linux/reboot.h>
++
++#include <asm/uaccess.h>
++#include <asm-arm/irq.h>
++#include <asm-arm/delay.h>
++
++/* Set this to 1 to output lots of debug messages. */
++#define NSLU2_IO_DEBUG 0
++
++#if NSLU2_IO_DEBUG
++#define nslu2_io_debug(args) printk args
++#else
++#define nslu2_io_debug(args) ((void)0)
++#endif
++
++#define VERSION "0.1.7"
++
++#define NSLU2BZ_MAJOR 62 //buzzer
++#define NSLU2LM_MAJOR 126
++
++
++#define NSLU2_BEEP_DUR_LONG 2000
++#define NSLU2_BEEP_DUR_MED 400
++#define NSLU2_BEEP_DUR_SHORT 100
++#define NSLU2_BEEP_PITCH_HIGH 250
++#define NSLU2_BEEP_PITCH_MED 500
++#define NSLU2_BEEP_PITCH_LOW 1000
++#define NSLU2_LONG_DELAY 30000
++
++#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
++
++// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe
++
++#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible
++#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults
++#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults
++#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000
++#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies
++#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies
++#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever
++#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long
++
++#define NSLU2LM_OFF _IOW('M',32,long)
++#define NSLU2LM_ON _IOW('M',33,long)
++#define NSLU2LM_BLINK _IOW('M',34,long)
++#define NSLU2LM_ALT _IOW('M',35,long)
++#define NSLU2LM_ALL_ON _IO('M',36)
++#define NSLU2LM_ALL_OFF _IO('M',37)
++
++#define PHYS_LEDS 4
++#define BLINK_DELAY 25
++
++// OR Masks to turn these LEDs ON
++
++#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010
++#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001
++#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011
++
++// AND Masks to turn these LEDs OFF
++
++#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101
++#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110
++#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100
++
++// AND Masks to turn these LEDs ON
++
++#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
++#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
++
++// Or Masks to turn these LEDs OFF
++
++#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
++#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
++
++// EOR masks for toggling LEDs on/off
++
++#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits
++#define RS_GRN_TGL 0x00000002
++#define RS_RED_TGL 0x00000001
++#define DISK1_TGL 0x00000008
++#define DISK2_TGL 0x00000004
++
++// The LED names for switches
++
++#define LED_RS_RED 0
++#define LED_RS_GRN 1
++#define LED_DISK1 2
++#define LED_DISK2 3
++#define LED_ALL 4
++
++static unsigned long ontime = 50;
++static unsigned long offtime = 450;
++static unsigned long bz_repeatcnt = 10;
++static unsigned long tone = 1000;
++
++static struct timer_list n2lm_rsg_timer; //rs green
++static struct timer_list n2lm_rsr_timer; //rs red
++static struct timer_list n2lm_d1_timer; //drive 1
++static struct timer_list n2lm_d2_timer; //drive 2
++static struct timer_list n2bz_timer; //beeper
++
++// sysfs class
++static struct class *n2lm_class;
++
++//==================================================================================================
++//
++// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the
++// GPIO output register is xor'd with a mask corresponding to the selected led which simply
++// flips that bit. No record of what any of the other leds is doing is needed.
++//
++//==================================================================================================
++// this blinks rs green or green/yellow if rs red is on
++#ifndef CONFIG_LEDS
++static void n2lm_rsg_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led
++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout
++ add_timer(&n2lm_rsg_timer); //reinit timer
++ return;
++}
++
++// this blinks or alternates rs red green... inited wit green on/red off
++static void n2lm_rsr_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data;
++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_rsr_timer);
++ return;
++}
++// blinks disk 1
++static void n2lm_d1_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL;
++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d1_timer);
++ return;
++}
++// blinks disk 2
++static void n2lm_d2_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL;
++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d2_timer);
++ return;
++}
++
++//==================================================================================================
++
++static void n2lm_timer_start(unsigned long led)
++{
++
++ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led));
++
++ switch(led) {
++ case LED_RS_RED:
++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_rsr_timer);
++ break;
++
++ case LED_RS_GRN:
++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_rsg_timer);
++ break;
++
++ case LED_DISK1:
++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d1_timer);
++ break;
++
++ case LED_DISK2:
++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d2_timer);
++ break;
++
++ default:
++ break;
++ }
++ return;
++}
++
++//==================================================================================================
++
++static void n2lm_timer_stop(unsigned long led)
++{
++ switch (led) {
++ case LED_RS_RED:
++ del_timer(&n2lm_rsr_timer);
++ break;
++ case LED_RS_GRN:
++ del_timer(&n2lm_rsg_timer);
++ break;
++ case LED_DISK1:
++ del_timer(&n2lm_d1_timer);
++ break;
++ case LED_DISK2:
++ del_timer(&n2lm_d2_timer);
++ break;
++ default:
++ break;
++ }
++ return;
++}
++
++//--------------------------------------------------------------------------------------------------
++
++static void n2lm_timer_stop_all(void)
++{
++ del_timer(&n2lm_rsg_timer);
++ del_timer(&n2lm_rsr_timer);
++ del_timer(&n2lm_d1_timer);
++ del_timer(&n2lm_d2_timer);
++ return;
++}
++//--------------------------------------------------------------------------------------------------
++
++static void n2lm_ledon(unsigned long led)
++{
++
++ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led));
++
++ switch (led) {
++ case LED_RS_RED:
++ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1
++ return;
++ case LED_RS_GRN:
++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2
++ return;
++ case LED_DISK1:
++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7
++ return;
++ case LED_DISK2:
++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb
++ return;
++ case LED_ALL: //all green
++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;
++ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON);
++ return;
++ }
++}
++
++//--------------------------------------------------------------------------------------------------
++
++static void n2lm_ledoff(unsigned long led)
++{
++
++ switch (led) {
++ case LED_RS_RED:
++ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe
++ return;
++ case LED_RS_GRN:
++ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd
++ return;
++ case LED_DISK1:
++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008
++ return;
++ case LED_DISK2:
++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004
++ return;
++ case LED_ALL:
++ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF);
++ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF);
++ }
++}
++
++//==================================================================================================
++
++static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led)
++{
++
++ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led));
++
++ if (led < 0 || led >= PHYS_LEDS)
++ return -EINVAL;
++
++ switch (cmd ) {
++ case NSLU2LM_ON:
++ n2lm_timer_stop(led);
++ n2lm_ledon(led);
++ break;
++
++ case NSLU2LM_OFF:
++ n2lm_timer_stop(led);
++ n2lm_ledoff(led);
++ break;
++
++ case NSLU2LM_BLINK:
++ n2lm_ledon(led);
++ if (led == LED_RS_RED)
++ n2lm_rsr_timer.data = RS_RED_TGL;
++ n2lm_timer_start(led);
++ break;
++
++ case NSLU2LM_ALT:
++ if (led == LED_RS_RED)
++ {
++ n2lm_ledon(LED_RS_GRN);
++ n2lm_ledoff(LED_RS_RED);
++ n2lm_rsr_timer.data = RS_RG_ALT;
++ n2lm_timer_start(LED_RS_RED);
++ break;
++ } else
++ return -EINVAL;
++
++ case NSLU2LM_ALL_ON:
++ n2lm_timer_stop_all();
++ n2lm_ledon(LED_ALL);
++ break;
++
++ case NSLU2LM_ALL_OFF:
++ n2lm_timer_stop_all();
++ n2lm_ledoff(LED_ALL);
++ break;
++
++ default:
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static struct file_operations n2lm_fops = {
++ .owner = THIS_MODULE,
++ .ioctl = n2lm_ioctl,
++};
++#endif
++//==================================================================================================
++// We can't do anything fancy here since the system tick rate is far below that required to
++// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until
++// I get up to speed on the timers. The saving grace is that for the normal uses, nothing
++// important should be haprepening.
++//==================================================================================================
++
++static void n2_buzz(int tone_delay, int duration)
++{
++ int i;
++
++ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
++
++ for (i = 1; i < duration; i++) {
++ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
++ udelay(tone_delay);
++ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
++ udelay(tone_delay);
++ }
++ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
++
++ return;
++}
++//=================================================================================================
++
++// this handles the buzzer duty cycle
++static void n2bz_handler(unsigned long data)
++{
++ if (--bz_repeatcnt > 0) { //if just one beep left to do
++ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout
++ add_timer(&n2bz_timer); //reinit timer
++ }
++ n2_buzz(tone/2, ontime);
++ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime));
++ return;
++}
++
++//==================================================================================================
++
++static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param)
++{
++ switch (cmd) {
++ case NSLU2BZ_BEEP:
++ n2_buzz(tone/2, ontime);
++ break;
++
++ case NSLU2BZ_BEEP_STOP:
++ del_timer(&n2bz_timer);
++ break;
++
++ case NSLU2BZ_BEEPS:
++ if (param == 0)
++ bz_repeatcnt = 0xffffffff;
++ else
++ bz_repeatcnt = param;
++ n2bz_handler(0);
++ break;
++
++ case NSLU2BZ_TONESET:
++ if (param >= 250 && param <= 2000)
++ tone = param;
++ break;
++
++ case NSLU2BZ_ONTIME:
++ if (param > 4 && param < 201)
++ ontime = param;
++ break;
++
++ case NSLU2BZ_SILENTTIME:
++ if (param > ontime) //enforce a reasonable duty cycle
++ offtime = param;
++ else
++ offtime = ontime;
++ break;
++
++ case NSLU2BZ_REPEATCNT:
++ if (param == 0)
++ bz_repeatcnt = 0xffffffff;
++ else
++ bz_repeatcnt = param;
++ break;
++
++ case NSLU2BZ_COMBINED:
++ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16
++ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies
++ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies
++ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16
++ break;
++
++ default:
++ break;
++ }
++ return 0;
++}
++
++static struct file_operations n2bz_fops = {
++ .owner = THIS_MODULE,
++ .ioctl = n2bz_ioctl,
++};
++
++static void n2iom_initarch(void)
++{
++#ifndef CONFIG_LEDS
++ init_timer(&n2lm_rsg_timer);
++ init_timer(&n2lm_rsr_timer);
++ init_timer(&n2lm_d1_timer);
++ init_timer(&n2lm_d2_timer);
++
++ n2lm_rsr_timer.function = n2lm_rsr_handler;
++ n2lm_rsg_timer.function = n2lm_rsg_handler;
++ n2lm_d2_timer.function = n2lm_d2_handler;
++ n2lm_d1_timer.function = n2lm_d1_handler;
++#endif
++
++ init_timer(&n2bz_timer);
++ n2bz_timer.function = n2bz_handler;
++
++ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0;
++
++#ifndef CONFIG_LEDS
++ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3
++ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds
++ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc;
++ n2lm_ledon(LED_ALL);
++ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT);
++ n2lm_ledoff(LED_ALL);
++
++ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit
++ n2lm_ledon(LED_RS_RED);
++#endif
++
++ return;
++}
++
++//==================================================================================================
++
++static int __init n2iom_init(void)
++{
++ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
++
++ n2iom_initarch();
++
++ n2lm_class = class_create(THIS_MODULE, "nslu2");
++
++#ifndef CONFIG_LEDS
++ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) {
++ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR);
++ return -EBUSY;
++ }
++ else {
++ class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
++ }
++#endif
++
++ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) {
++ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR);
++ return -EBUSY;
++ }
++ else {
++ class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
++ }
++
++ return 0;
++}
++
++//==================================================================================================
++
++static void __exit n2iom_exit(void)
++{
++
++#ifndef CONFIG_LEDS
++ del_timer(&n2lm_rsg_timer);
++ del_timer(&n2lm_rsr_timer);
++ del_timer(&n2lm_d1_timer);
++ del_timer(&n2lm_d2_timer);
++
++ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" );
++ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0));
++#endif
++
++ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz");
++ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0));
++
++ class_destroy(n2lm_class);
++}
++
++module_init(n2iom_init);
++module_exit(n2iom_exit);
++
++MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>");
++MODULE_DESCRIPTION("NSLU2 I/O driver");
++MODULE_LICENSE("GPL");
--- /dev/null
+--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/Kconfig 2005-10-26 15:19:34.490925838 -0700
++++ linux-2.6.13/arch/arm/Kconfig 2005-10-26 15:24:18.628805508 -0700
+@@ -389,7 +389,8 @@ config LEDS
+ ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
+ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
+- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
++ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
++ MACH_NSLU2
+ help
+ If you say Y here, the LEDs on your machine will be used
+ to provide useful information about your current system status.
+@@ -403,7 +404,7 @@ config LEDS
+
+ config LEDS_TIMER
+ bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
+- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
++ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2
+ depends on LEDS
+ default y if ARCH_EBSA110
+ help
+@@ -419,7 +420,8 @@ config LEDS_TIMER
+
+ config LEDS_CPU
+ bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
+- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
++ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \
++ || MACH_NSLU2
+ depends on LEDS
+ help
+ If you say Y here, the red LED will be used to give a good real
+--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:19:43.979522918 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile 2005-10-26 15:24:18.632805759 -0700
+@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
+ obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
+
++leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o
++obj-$(CONFIG_LEDS) += $(leds-y)
++
++
+--- linux-2.6.13/.pc/75-nslu2-leds.patch/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:19:44.251540035 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-leds.c 2005-10-26 15:24:18.632805759 -0700
+@@ -0,0 +1,223 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-leds.c
++ *
++ * NSLU2 LEDs driver
++ *
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * based on nslu2-io.c
++ * Copyright (C) 2004 Karen Spearel
++ * and arch/arm/mach-footbridge/netwinder-leds.c
++ * Copyright (C) 1998-1999 Russell King
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/spinlock.h>
++#include <linux/notifier.h>
++
++#include <asm/hardware.h>
++#include <asm/leds.h>
++#include <asm/mach-types.h>
++#include <asm/system.h>
++
++#define LED_STATE_ENABLED 0x01
++#define LED_STATE_CLAIMED 0x02
++#define LED_STATE_IDLE 0x04
++
++static unsigned char led_state;
++static unsigned int hw_led_state;
++
++static const unsigned long idle_seq[4] = {
++
++ NSLU2_LED_GRN_BM, 0,
++ NSLU2_LED_GRN_BM, 0,
++};
++
++static const unsigned long busy_seq[4] = {
++
++ NSLU2_LED_GRN_BM, 0,
++ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0,
++};
++
++static unsigned char led_count = 0;
++
++static DEFINE_SPINLOCK(leds_lock);
++extern spinlock_t gpio_lock;
++
++static void nslu2_leds_event(led_event_t evt)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&leds_lock, flags);
++
++ switch (evt) {
++ case led_start:
++ /* Let's rock! Red led on, all others off. Remember
++ * that disk1/disk2 works inverted. On the NSLU2, the
++ * interface starts in a claimed state. XXX
++ */
++ led_state = LED_STATE_ENABLED | LED_STATE_CLAIMED;
++ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM
++ | NSLU2_LED_RED_BM;
++ break;
++
++ case led_stop:
++ led_state &= ~LED_STATE_ENABLED;
++ break;
++
++ case led_claim:
++ /* The user claimed the interface, red and green off */
++ led_state |= LED_STATE_CLAIMED;
++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++ break;
++
++ case led_release:
++ /* The user released the interface, preserve the last
++ * status of the leds, except red/green.
++ */
++ led_state &= ~LED_STATE_CLAIMED;
++ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C;
++ break;
++
++#ifdef CONFIG_LEDS_TIMER
++ case led_timer:
++ /* Pulse green led */
++ if (!(led_state & LED_STATE_CLAIMED))
++ {
++ /* clear red and green bits */
++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++
++ /* copy the right sequence in */
++ if (led_state & LED_STATE_IDLE)
++ hw_led_state |= idle_seq[led_count % 4];
++ else
++ hw_led_state |= busy_seq[led_count % 4];
++
++ led_count++;
++ }
++ break;
++#endif
++
++#ifdef CONFIG_LEDS_CPU
++
++ case led_idle_start:
++ led_state |= LED_STATE_IDLE;
++#ifndef CONFIG_LEDS_TIMER
++ /* green on, red off */
++ hw_led_state |= NSLU2_LED_GRN_BM;
++ hw_led_state &= ~NSLU2_LED_RED_BM;
++#endif
++ break;
++
++ case led_idle_end:
++ led_state &= ~LED_STATE_IDLE;
++#ifndef CONFIG_LEDS_TIMER
++ /* green on, red on -> amber on */
++ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM;
++#endif
++ break;
++#endif
++
++ case led_halted:
++ if (!(led_state & LED_STATE_CLAIMED))
++ hw_led_state |= NSLU2_LED_RED_BM;
++ break;
++
++ /* leds */
++
++ case led_green_on:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state |= NSLU2_LED_GRN_BM;
++ break;
++
++ case led_green_off:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state &= ~NSLU2_LED_GRN_BM;
++ break;
++
++ case led_amber_on:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++ break;
++
++ case led_amber_off:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++ break;
++
++ case led_red_on:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state |= NSLU2_LED_RED_BM;
++ break;
++
++ case led_red_off:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state &= ~NSLU2_LED_RED_BM;
++ break;
++
++ default:
++ break;
++ }
++
++ spin_unlock_irqrestore(&leds_lock, flags);
++
++ if (led_state & LED_STATE_ENABLED) {
++ spin_lock_irqsave(&gpio_lock, flags);
++ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state;
++ spin_unlock_irqrestore(&gpio_lock, flags);
++ }
++}
++
++static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event,
++ void *ptr)
++{
++ leds_event(led_green_off);
++ leds_event(led_red_on);
++
++ return NOTIFY_DONE;
++}
++
++static struct notifier_block nslu2_leds_panic_block = {
++ .notifier_call = nslu2_leds_panic_event,
++};
++
++static int __init nslu2_leds_init(void)
++{
++ if (!(machine_is_nslu2()))
++ return 0;
++
++ printk(KERN_INFO "NSLU2: leds\n");
++
++ /* register panic notifier */
++ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block);
++
++ /* enable gpio 0-3 */
++ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT);
++ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT);
++ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT);
++ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT);
++
++ leds_event = nslu2_leds_event;
++
++ /* this will also initialize the leds to the
++ * default state.
++ */
++
++ leds_event(led_start);
++
++ return 0;
++}
++
++module_init(nslu2_leds_init);
++
--- /dev/null
+--- linux-2.6.13/.pc/90-ixp4xx-pci-le.patch/arch/arm/mach-ixp4xx/common-pci.c 2005-08-28 16:41:01.000000000 -0700
++++ linux-2.6.13/arch/arm/mach-ixp4xx/common-pci.c 2005-10-26 15:24:30.337542292 -0700
+@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void)
+ #ifdef __ARMEB__
+ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
+ #else
+- *PCI_CSR = PCI_CSR_IC;
++ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
+ #endif
+
+ pr_debug("DONE\n");
--- /dev/null
+*** linux-2.6.13/drivers/usb/net/pegasus.h.orig Mon Aug 29 01:41:01 2005
+--- linux-2.6.13/drivers/usb/net/pegasus.h Sat Oct 22 20:51:29 2005
+***************
+*** 181,186 ****
+--- 181,188 ----
+ DEFAULT_GPIO_RESET )
+ PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
++ PEGASUS_DEV( "Philips CPWUE01/00 USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
++ DEFAULT_GPIO_RESET | PEGASUS_II )
+ PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
+ VENDOR_ADMTEK, 0x8511,
+ DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14
+# Mon Nov 28 18:53:25 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+CONFIG_ARCH_IXP4XX=y
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+
+#
+# Intel IXP4xx Implementation Options
+#
+
+#
+# IXP4xx Platforms
+#
+CONFIG_MACH_NSLU2=y
+# CONFIG_ARCH_AVILA is not set
+# CONFIG_ARCH_ADI_COYOTE is not set
+# CONFIG_ARCH_IXDP425 is not set
+# CONFIG_MACH_IXDPG425 is not set
+# CONFIG_MACH_IXDP465 is not set
+# CONFIG_ARCH_PRPMC1100 is not set
+# CONFIG_MACH_GTWX5715 is not set
+
+#
+# IXP4xx Options
+#
+CONFIG_IXP4XX_INDIRECT_PCI=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_XSCALE_PMU=y
+CONFIG_DMABOUNCE=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc x1205.hctosys=1 noirqdebug console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_PHYSDEV=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_IXP4XX=y
+# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=10240
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MACLIST=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_IXP4XX_WATCHDOG=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_RTC=m
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_IOP3XX is not set
+CONFIG_I2C_IXP4XX=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+CONFIG_SENSORS_X1205=y
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+CONFIG_VIDEO_BT848=m
+# CONFIG_VIDEO_SAA6588 is not set
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+CONFIG_VIDEO_STRADIS=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_OVCAMCHIP=m
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_VIDEO_VIDEOBUF=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_BUF=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA ARM devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+
+#
+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_W9968CF is not set
+CONFIG_USB_PWC=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
--- /dev/null
+http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3218/1
+
+PAGE_SHIFT is undeclared in include/asm-arm/arch-ixp4xx/memory.h, identified by the following kernel compilation error:
+
+CC [M] sound/core/memory.o
+In file included from include/asm/memory.h:27,
+from include/asm/io.h:28,
+from sound/core/memory.c:24:
+include/asm/arch/memory.h: In function `__arch_adjust_zones':
+include/asm/arch/memory.h:28: error: `PAGE_SHIFT' undeclared (first use
+in this function)
+
+This patch replaces my previous attempt at fixing this problem (Patch 3214/1) and is based on the following feedback:
+
+Russell King wrote:
+> The error you see came up on SA1100. The best solution was to move
+> the __arch_adjust_zones() function out of line. I suggest ixp4xx
+> does the same.
+
+I have moved the function out of line into arch/arm/mach-ixp4xx/common-pci.c as suggested.
+
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+
+--- linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h~ 2005-12-30 05:18:27.000000000 +1030
++++ linux-2.6.15-rc7/include/asm-arm/arch-ixp4xx/memory.h 2005-12-30 05:36:04.000000000 +1030
+@@ -16,31 +16,10 @@
+
+ #ifndef __ASSEMBLY__
+
+-/*
+- * Only first 64MB of memory can be accessed via PCI.
+- * We use GFP_DMA to allocate safe buffers to do map/unmap.
+- * This is really ugly and we need a better way of specifying
+- * DMA-capable regions of memory.
+- */
+-static inline void __arch_adjust_zones(int node, unsigned long *zone_size,
+- unsigned long *zhole_size)
+-{
+- unsigned int sz = SZ_64M >> PAGE_SHIFT;
+-
+- /*
+- * Only adjust if > 64M on current system
+- */
+- if (node || (zone_size[0] <= sz))
+- return;
+-
+- zone_size[1] = zone_size[0] - sz;
+- zone_size[0] = sz;
+- zhole_size[1] = zhole_size[0];
+- zhole_size[0] = 0;
+-}
++void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+ #define arch_adjust_zones(node, size, holes) \
+- __arch_adjust_zones(node, size, holes)
++ ixp4xx_adjust_zones(node, size, holes)
+
+ #define ISA_DMA_THRESHOLD (SZ_64M - 1)
+
+--- linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c~ 2005-12-30 05:16:03.000000000 +1030
++++ linux-2.6.15-rc7/arch/arm/mach-ixp4xx/common-pci.c 2005-12-30 05:43:55.000000000 +1030
+@@ -341,6 +341,29 @@ int dma_needs_bounce(struct device *dev,
+ return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
+ }
+
++/*
++ * Only first 64MB of memory can be accessed via PCI.
++ * We use GFP_DMA to allocate safe buffers to do map/unmap.
++ * This is really ugly and we need a better way of specifying
++ * DMA-capable regions of memory.
++ */
++void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
++ unsigned long *zhole_size)
++{
++ unsigned int sz = SZ_64M >> PAGE_SHIFT;
++
++ /*
++ * Only adjust if > 64M on current system
++ */
++ if (node || (zone_size[0] <= sz))
++ return;
++
++ zone_size[1] = zone_size[0] - sz;
++ zone_size[0] = sz;
++ zhole_size[1] = zhole_size[0];
++ zhole_size[0] = 0;
++}
++
+ void __init ixp4xx_pci_preinit(void)
+ {
+ unsigned long processor_id;
--- /dev/null
+drivers/mtd/redboot.c: recognise a foreign byte sex partition table
+
+The RedBoot boot loader writes flash partition tables containing native
+byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an
+LE kernel from BE RedBoot) the current MTD driver fails to handle the
+partition table and therefore is unable to generate the correct partition
+map for the flash.
+
+The patch recognises that the FIS directory (the partition table) is
+byte-reversed by examining the partition table size, which is known to be
+one erase block (this is an assumption made elsewhere in redboot.c). If
+the size matches the erase block after byte swapping the value then
+byte-reversal is assumed, if not no further action is taken. The patched
+code is fail safe; should redboot.c be changed to support a partition table
+with a modified size field the test will fail and the partition table will
+be assumed to have the host byte sex.
+
+If byte-reversal is detected the patch byte swaps the remainder of the 32
+bit fields in the copy of the table; this copy is then used to set up the
+MTD partition map.
+
+Signed-off-by: John Bowler <jbowler@acm.org>
+Signed-off-by: Andrew Morton <akpm@osdl.org>
+Modified slightly and
+Signed-off-by: David Woodhouse <dwmw2@infradead.org>
+
+Index: drivers/mtd/redboot.c
+===================================================================
+RCS file: /home/cvs/mtd/drivers/mtd/redboot.c,v
+retrieving revision 1.18
+retrieving revision 1.19
+diff -u -p -r1.18 -r1.19
+--- linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/mtd/redboot.c 1970-01-01 00:00:00.000000000 +0000
+@@ -89,8 +89,32 @@ static int parse_redboot_partitions(stru
+ i = numslots;
+ break;
+ }
+- if (!memcmp(buf[i].name, "FIS directory", 14))
++ if (!memcmp(buf[i].name, "FIS directory", 14)) {
++ /* This is apparently the FIS directory entry for the
++ * FIS directory itself. The FIS directory size is
++ * one erase block; if the buf[i].size field is
++ * swab32(erasesize) then we know we are looking at
++ * a byte swapped FIS directory - swap all the entries!
++ * (NOTE: this is 'size' not 'data_length'; size is
++ * the full size of the entry.)
++ */
++ if (swab32(buf[i].size) == master->erasesize) {
++ int j;
++ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
++ /* The unsigned long fields were written with the
++ * wrong byte sex, name and pad have no byte sex.
++ */
++ swab32s(&buf[j].flash_base);
++ swab32s(&buf[j].mem_base);
++ swab32s(&buf[j].size);
++ swab32s(&buf[j].entry_point);
++ swab32s(&buf[j].data_length);
++ swab32s(&buf[j].desc_cksum);
++ swab32s(&buf[j].file_cksum);
++ }
++ }
+ break;
++ }
+ }
+ if (i == numslots) {
+ /* Didn't find it */
+
+
--- /dev/null
+--- linux-2.6.15/fs/Kconfig~ 2006-01-03 13:51:10.000000000 +1030
++++ linux-2.6.15/fs/Kconfig 2006-01-05 01:35:36.000000000 +1030
+@@ -1132,6 +1132,31 @@ config JFFS2_CMODE_SIZE
+
+ endchoice
+
++choice
++ prompt "JFFS2 endianness"
++ default JFFS2_NATIVE_ENDIAN
++ depends on JFFS2_FS
++ help
++ You can set here the default endianness of JFFS2 from
++ the available options. Don't touch if unsure.
++
++config JFFS2_NATIVE_ENDIAN
++ bool "native endian"
++ help
++ Uses a native endian bytestream.
++
++config JFFS2_BIG_ENDIAN
++ bool "big endian"
++ help
++ Uses a big endian bytestream.
++
++config JFFS2_LITTLE_ENDIAN
++ bool "little endian"
++ help
++ Uses a little endian bytestream.
++
++endchoice
++
+ config CRAMFS
+ tristate "Compressed ROM file system support (cramfs)"
+ select ZLIB_INFLATE
+--- linux-2.6.15/fs/jffs2/nodelist.h~ 2006-01-05 01:37:06.000000000 +1030
++++ linux-2.6.15/fs/jffs2/nodelist.h 2006-01-05 01:37:54.000000000 +1030
+@@ -29,12 +29,10 @@
+ #include "os-linux.h"
+ #endif
+
+-#define JFFS2_NATIVE_ENDIAN
+-
+ /* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from
+ whatever OS we're actually running on here too. */
+
+-#if defined(JFFS2_NATIVE_ENDIAN)
++#if defined(CONFIG_JFFS2_NATIVE_ENDIAN)
+ #define cpu_to_je16(x) ((jint16_t){x})
+ #define cpu_to_je32(x) ((jint32_t){x})
+ #define cpu_to_jemode(x) ((jmode_t){os_to_jffs2_mode(x)})
+@@ -42,7 +40,7 @@
+ #define je16_to_cpu(x) ((x).v16)
+ #define je32_to_cpu(x) ((x).v32)
+ #define jemode_to_cpu(x) (jffs2_to_os_mode((x).m))
+-#elif defined(JFFS2_BIG_ENDIAN)
++#elif defined(CONFIG_JFFS2_BIG_ENDIAN)
+ #define cpu_to_je16(x) ((jint16_t){cpu_to_be16(x)})
+ #define cpu_to_je32(x) ((jint32_t){cpu_to_be32(x)})
+ #define cpu_to_jemode(x) ((jmode_t){cpu_to_be32(os_to_jffs2_mode(x))})
+@@ -50,7 +48,7 @@
+ #define je16_to_cpu(x) (be16_to_cpu(x.v16))
+ #define je32_to_cpu(x) (be32_to_cpu(x.v32))
+ #define jemode_to_cpu(x) (be32_to_cpu(jffs2_to_os_mode((x).m)))
+-#elif defined(JFFS2_LITTLE_ENDIAN)
++#elif defined(CONFIG_JFFS2_LITTLE_ENDIAN)
+ #define cpu_to_je16(x) ((jint16_t){cpu_to_le16(x)})
+ #define cpu_to_je32(x) ((jint32_t){cpu_to_le32(x)})
+ #define cpu_to_jemode(x) ((jmode_t){cpu_to_le32(os_to_jffs2_mode(x))})
--- /dev/null
+--- linux-nslu2.orig/include/linux/rtc.h 2006-01-03 15:31:18.000000000 +0100
++++ linux-nslu2/include/linux/rtc.h 2006-01-03 15:34:24.000000000 +0100
+@@ -91,8 +91,81 @@ struct rtc_pll_info {
+ #define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
+ #define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
+
++/* interrupt flags */
++#define RTC_IRQF 0x80 /* any of the following is active */
++#define RTC_PF 0x40
++#define RTC_AF 0x20
++#define RTC_UF 0x10
++
+ #ifdef __KERNEL__
+
++#include <linux/device.h>
++#include <linux/seq_file.h>
++#include <linux/cdev.h>
++#include <linux/poll.h>
++
++struct rtc_class_ops {
++ int (*open)(struct device *);
++ void (*release)(struct device *);
++ int (*ioctl)(struct device *, unsigned int, unsigned long);
++ int (*read_time)(struct device *, struct rtc_time *);
++ int (*set_time)(struct device *, struct rtc_time *);
++ int (*read_alarm)(struct device *, struct rtc_wkalrm *);
++ int (*set_alarm)(struct device *, struct rtc_wkalrm *);
++ int (*proc)(struct device *, struct seq_file *);
++ int (*set_mmss)(struct device *, unsigned long secs);
++ int (*irq_set_state)(struct device *, int enabled);
++ int (*irq_set_freq)(struct device *, int freq);
++};
++
++#define RTC_DEVICE_NAME_SIZE 20
++struct rtc_task;
++
++struct rtc_device
++{
++ int id;
++ struct module *owner;
++ struct rw_semaphore lock;
++ struct class_device class_dev;
++ struct rtc_class_ops *ops;
++ char name[RTC_DEVICE_NAME_SIZE];
++
++ struct cdev char_dev;
++ struct semaphore char_sem;
++
++ unsigned long irq_data;
++ spinlock_t irq_lock;
++ wait_queue_head_t irq_queue;
++ struct fasync_struct *async_queue;
++
++ spinlock_t irq_task_lock;
++ struct rtc_task *irq_task;
++ int irq_freq;
++};
++#define to_rtc_device(d) container_of(d, struct rtc_device, class_dev)
++
++extern struct rtc_device *rtc_device_register(char *name,
++ struct device *dev,
++ struct rtc_class_ops *ops,
++ struct module *owner);
++extern void rtc_device_unregister(struct rtc_device *rdev);
++extern int rtc_interface_register(struct class_interface *intf);
++
++
++extern int rtc_month_days(unsigned int month, unsigned int year);
++extern int rtc_valid_tm(struct rtc_time *tm);
++extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time);
++extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm);
++
++extern int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm);
++extern int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm);
++extern int rtc_read_alarm(struct class_device *class_dev,
++ struct rtc_wkalrm *alrm);
++extern int rtc_set_alarm(struct class_device *class_dev,
++ struct rtc_wkalrm *alrm);
++extern void rtc_update_irq(struct class_device *class_dev,
++ unsigned long num, unsigned long events);
++
+ typedef struct rtc_task {
+ void (*func)(void *private_data);
+ void *private_data;
+--- linux-nslu2.orig/drivers/Kconfig 2006-01-03 15:31:19.000000000 +0100
++++ linux-nslu2/drivers/Kconfig 2006-01-04 01:27:31.000000000 +0100
+@@ -66,4 +66,6 @@ source "drivers/infiniband/Kconfig"
+
+ source "drivers/sn/Kconfig"
+
++source "drivers/rtc/Kconfig"
++
+ endmenu
+--- linux-nslu2.orig/drivers/Makefile 2006-01-03 15:33:32.000000000 +0100
++++ linux-nslu2/drivers/Makefile 2006-01-04 01:27:31.000000000 +0100
+@@ -54,6 +54,7 @@ obj-$(CONFIG_USB_GADGET) += usb/gadget/
+ obj-$(CONFIG_GAMEPORT) += input/gameport/
+ obj-$(CONFIG_INPUT) += input/
+ obj-$(CONFIG_I2O) += message/
++obj-y += rtc/
+ obj-$(CONFIG_I2C) += i2c/
+ obj-$(CONFIG_W1) += w1/
+ obj-$(CONFIG_HWMON) += hwmon/
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-nslu2/drivers/rtc/class.c 2006-01-03 15:45:19.000000000 +0100
+@@ -0,0 +1,141 @@
++/*
++ * RTC subsystem, base class
++ *
++ * Copyright (C) 2005 Tower Technologies
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * class skeleton from drivers/hwmon/hwmon.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License.
++*/
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++#include <linux/kdev_t.h>
++#include <linux/idr.h>
++
++static DEFINE_IDR(rtc_idr);
++static DECLARE_MUTEX(idr_lock);
++struct class *rtc_class;
++
++static void rtc_device_release(struct class_device *class_dev)
++{
++ struct rtc_device *rtc = to_rtc_device(class_dev);
++ down(&idr_lock);
++ idr_remove(&rtc_idr, rtc->id);
++ up(&idr_lock);
++ kfree(rtc);
++}
++
++/**
++ * rtc_device_register - register w/ RTC class
++ * @dev: the device to register
++ *
++ * rtc_device_unregister() must be called when the class device is no
++ * longer needed.
++ *
++ * Returns the pointer to the new struct class device.
++ */
++struct rtc_device *rtc_device_register(char *name, struct device *dev,
++ struct rtc_class_ops *ops,
++ struct module *owner)
++{
++ struct rtc_device *rtc;
++ int id, err;
++
++ if (idr_pre_get(&rtc_idr, GFP_KERNEL) == 0) {
++ err = -ENOMEM;
++ goto exit;
++ }
++
++
++ down(&idr_lock);
++ err = idr_get_new(&rtc_idr, NULL, &id);
++ up(&idr_lock);
++
++ if (err < 0)
++ goto exit;
++
++ id = id & MAX_ID_MASK;
++
++ if ((rtc = kzalloc(sizeof(struct rtc_device), GFP_KERNEL)) == NULL) {
++ err = -ENOMEM;
++ goto exit_idr;
++ }
++
++ rtc->id = id;
++ rtc->ops = ops;
++ rtc->owner = owner;
++ rtc->class_dev.dev = dev;
++ rtc->class_dev.class = rtc_class;
++ rtc->class_dev.release = rtc_device_release;
++
++ init_rwsem(&rtc->lock);
++ spin_lock_init(&rtc->irq_lock);
++ spin_lock_init(&rtc->irq_task_lock);
++
++ strlcpy(rtc->name, name, RTC_DEVICE_NAME_SIZE);
++ snprintf(rtc->class_dev.class_id, BUS_ID_SIZE, "rtc%d", id);
++
++ if ((err = class_device_register(&rtc->class_dev)))
++ goto exit_kfree;
++
++ dev_info(dev, "rtc core: registered %s as %s\n",
++ rtc->name, rtc->class_dev.class_id);
++
++ return rtc;
++
++exit_kfree:
++ kfree(rtc);
++
++exit_idr:
++ idr_remove(&rtc_idr, id);
++
++exit:
++ return ERR_PTR(err);
++}
++EXPORT_SYMBOL_GPL(rtc_device_register);
++
++
++/**
++ * rtc_device_unregister - removes the previously registered RTC class device
++ *
++ * @rtc: the RTC class device to destroy
++ */
++void rtc_device_unregister(struct rtc_device *rtc)
++{
++ down_write(&rtc->lock);
++ class_device_unregister(&rtc->class_dev);
++}
++EXPORT_SYMBOL_GPL(rtc_device_unregister);
++
++int rtc_interface_register(struct class_interface *intf)
++{
++ intf->class = rtc_class;
++ return class_interface_register(intf);
++}
++EXPORT_SYMBOL_GPL(rtc_interface_register);
++
++static int __init rtc_init(void)
++{
++ rtc_class = class_create(THIS_MODULE, "rtc");
++ if (IS_ERR(rtc_class)) {
++ printk(KERN_ERR "%s: couldn't create class\n", __FILE__);
++ return PTR_ERR(rtc_class);
++ }
++ return 0;
++}
++
++static void __exit rtc_exit(void)
++{
++ class_destroy(rtc_class);
++}
++
++module_init(rtc_init);
++module_exit(rtc_exit);
++
++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towerteh.it>");
++MODULE_DESCRIPTION("RTC class support");
++MODULE_LICENSE("GPL");
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-nslu2/drivers/rtc/Kconfig 2006-01-04 01:27:21.000000000 +0100
+@@ -0,0 +1,93 @@
++#
++# RTC class/drivers configuration
++#
++
++menu "Real Time Clock"
++
++config RTC_CLASS
++ tristate "RTC class"
++ depends on EXPERIMENTAL
++ default y
++ help
++ Generic RTC class support. If you say yes here, you will
++ be allowed to plug one or more RTCs to your system. You will
++ probably want to enable one of more of the interfaces below.
++
++ This driver can also be built as a module. If so, the module
++ will be called rtc-class.
++
++comment "RTC interfaces"
++ depends on RTC_CLASS
++
++config RTC_INTF_SYSFS
++ tristate "sysfs"
++ depends on RTC_CLASS && SYSFS
++ default RTC_CLASS
++ help
++ Say yes here if you want to use your RTC using the sysfs
++ interface, /sys/class/rtc/rtcX .
++
++ This driver can also be built as a module. If so, the module
++ will be called rtc-sysfs.
++
++config RTC_INTF_PROC
++ tristate "proc"
++ depends on RTC_CLASS && PROC_FS
++ default RTC_CLASS
++ help
++ Say yes here if you want to use your RTC using the proc
++ interface, /proc/driver/rtc .
++
++ This driver can also be built as a module. If so, the module
++ will be called rtc-proc.
++
++config RTC_INTF_DEV
++ tristate "dev"
++ depends on RTC_CLASS
++ default RTC_CLASS
++ help
++ Say yes here if you want to use your RTC using the dev
++ interface, /dev/rtc .
++
++ This driver can also be built as a module. If so, the module
++ will be called rtc-dev.
++
++comment "RTC drivers"
++ depends on RTC_CLASS
++
++config RTC_DRV_X1205
++ tristate "Xicor/Intersil X1205 RTC chip"
++ depends on RTC_CLASS && I2C
++ help
++ If you say yes here you get support for the
++ Xicor/Intersil X1205 RTC chip.
++
++ This driver can also be built as a module. If so, the module
++ will be called rtc-x1205.
++
++config RTC_DRV_DS1672
++ tristate "Dallas/Maxim DS1672"
++ depends on RTC_CLASS && I2C
++ help
++ If you say yes here you get support for the
++ Dallas/Maxim DS1672 timekeeping chip.
++
++ This driver can also be built as a module. If so, the module
++ will be called rtc-ds1672.
++
++config RTC_DRV_TEST
++ tristate "Test driver/device"
++ depends on RTC_CLASS
++ help
++ If you say yes here you get support for the
++ RTC test driver. It's a software RTC which can be
++ used to test the RTC subsystem APIs. It gets
++ the time from the system clock.
++ You want this driver only if you are doing development
++ on the RTC subsystem. Please read the source code
++ for further details.
++
++ This driver can also be built as a module. If so, the module
++ will be called rtc-test.
++
++endmenu
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-nslu2/drivers/rtc/Makefile 2006-01-04 01:27:21.000000000 +0100
+@@ -0,0 +1,15 @@
++#
++# Makefile for RTC class/drivers.
++#
++
++obj-y += utils.o
++obj-$(CONFIG_RTC_CLASS) += rtc-core.o
++rtc-core-y := class.o interface.o
++obj-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
++obj-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o
++obj-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o
++
++obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
++obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
++obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
++
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-nslu2/drivers/rtc/interface.c 2006-01-03 15:34:24.000000000 +0100
+@@ -0,0 +1,189 @@
++/*
++ * RTC subsystem, interface functions
++ *
++ * Copyright (C) 2005 Tower Technologies
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * based on arch/arm/common/rtctime.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License.
++*/
++
++#include <linux/rtc.h>
++
++extern struct class *rtc_class;
++
++int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm)
++{
++ int err = -EINVAL;
++ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
++
++ if (ops->read_time) {
++ memset(tm, 0, sizeof(struct rtc_time));
++ err = ops->read_time(class_dev->dev, tm);
++ }
++ return err;
++}
++EXPORT_SYMBOL(rtc_read_time);
++
++int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm)
++{
++ int err;
++ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
++
++ err = rtc_valid_tm(tm);
++ if (err == 0 && ops->set_time)
++ err = ops->set_time(class_dev->dev, tm);
++
++ return err;
++}
++EXPORT_SYMBOL(rtc_set_time);
++
++int rtc_read_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm)
++{
++ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
++ int err = -EINVAL;
++
++ if (ops->read_alarm) {
++ memset(alarm, 0, sizeof(struct rtc_wkalrm));
++ err = ops->read_alarm(class_dev->dev, alarm);
++ }
++ return err;
++}
++EXPORT_SYMBOL(rtc_read_alarm);
++
++int rtc_set_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm)
++{
++ int err = -EINVAL;
++ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
++
++ if (ops->set_alarm)
++ err = ops->set_alarm(class_dev->dev, alarm);
++ return err;
++}
++EXPORT_SYMBOL(rtc_set_alarm);
++
++void rtc_update_irq(struct class_device *class_dev,
++ unsigned long num, unsigned long events)
++{
++ struct rtc_device *rtc = to_rtc_device(class_dev);
++
++ spin_lock(&rtc->irq_lock);
++ rtc->irq_data = (rtc->irq_data + (num << 8)) | events;
++ spin_unlock(&rtc->irq_lock);
++
++ spin_lock(&rtc->irq_task_lock);
++ if (rtc->irq_task)
++ rtc->irq_task->func(rtc->irq_task->private_data);
++ spin_unlock(&rtc->irq_task_lock);
++
++ wake_up_interruptible(&rtc->irq_queue);
++ kill_fasync(&rtc->async_queue, SIGIO, POLL_IN);
++}
++EXPORT_SYMBOL(rtc_update_irq);
++
++struct class_device *rtc_open(char *name)
++{
++ struct class_device *class_dev = NULL,
++ *class_dev_tmp;
++
++ down(&rtc_class->sem);
++ list_for_each_entry(class_dev_tmp, &rtc_class->children, node) {
++ if (strncmp(class_dev_tmp->class_id, name, BUS_ID_SIZE) == 0) {
++ class_dev = class_dev_tmp;
++ break;
++ }
++ }
++ up(&rtc_class->sem);
++
++ return class_dev;
++}
++EXPORT_SYMBOL(rtc_open);
++
++void rtc_close(struct class_device *class_dev)
++{
++}
++EXPORT_SYMBOL(rtc_close);
++
++int rtc_irq_register(struct class_device *class_dev, struct rtc_task *task)
++{
++ int retval = -EBUSY;
++ struct rtc_device *rtc = to_rtc_device(class_dev);
++
++ if (task == NULL || task->func == NULL)
++ return -EINVAL;
++
++ spin_lock(&rtc->irq_task_lock);
++ if (rtc->irq_task == NULL) {
++ rtc->irq_task = task;
++ retval = 0;
++ }
++ spin_unlock(&rtc->irq_task_lock);
++
++ return retval;
++}
++EXPORT_SYMBOL(rtc_irq_register);
++
++void rtc_irq_unregister(struct class_device *class_dev, struct rtc_task *task)
++{
++ struct rtc_device *rtc = to_rtc_device(class_dev);
++
++ spin_lock(&rtc->irq_task_lock);
++ if (rtc->irq_task == task)
++ rtc->irq_task = NULL;
++ spin_unlock(&rtc->irq_task_lock);
++}
++EXPORT_SYMBOL(rtc_irq_unregister);
++
++int rtc_irq_set_state(struct class_device *class_dev, struct rtc_task *task, int enabled)
++{
++ int err = 0;
++ unsigned long flags;
++ struct rtc_device *rtc = to_rtc_device(class_dev);
++
++ spin_lock_irqsave(&rtc->irq_task_lock, flags);
++ if (rtc->irq_task != task)
++ err = -ENXIO;
++ spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
++
++ if (err == 0)
++ err = rtc->ops->irq_set_state(class_dev->dev, enabled);
++
++ return err;
++}
++EXPORT_SYMBOL(rtc_irq_set_state);
++
++int rtc_irq_set_freq(struct class_device *class_dev, struct rtc_task *task, int freq)
++{
++ int err = 0, tmp = 0;
++ unsigned long flags;
++ struct rtc_device *rtc = to_rtc_device(class_dev);
++
++ /* allowed range is 2-8192 */
++ if (freq < 2 || freq > 8192)
++ return -EINVAL;
++
++/* if ((freq > rtc_max_user_freq) && (!capable(CAP_SYS_RESOURCE)))
++ return -EACCES;
++*/
++ /* check if freq is a power of 2 */
++ while (freq > (1 << tmp))
++ tmp++;
++
++ if (freq != (1 << tmp))
++ return -EINVAL;
++
++ spin_lock_irqsave(&rtc->irq_task_lock, flags);
++ if (rtc->irq_task != task)
++ err = -ENXIO;
++ spin_unlock_irqrestore(&rtc->irq_task_lock, flags);
++
++ if (err == 0) {
++ if ((err = rtc->ops->irq_set_freq(class_dev->dev, freq)) == 0)
++ rtc->irq_freq = freq;
++ }
++ return err;
++
++}
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-nslu2/drivers/rtc/utils.c 2006-01-03 15:34:24.000000000 +0100
+@@ -0,0 +1,97 @@
++/*
++ * RTC subsystem, utility functions
++ *
++ * Copyright (C) 2005 Tower Technologies
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * based on arch/arm/common/rtctime.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License.
++*/
++
++#include <linux/rtc.h>
++
++static const unsigned char rtc_days_in_month[] = {
++ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
++};
++
++#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
++#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
++
++int rtc_month_days(unsigned int month, unsigned int year)
++{
++ return rtc_days_in_month[month] + (LEAP_YEAR(year) && month == 1);
++}
++EXPORT_SYMBOL(rtc_month_days);
++
++/*
++ * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
++ */
++void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
++{
++ int days, month, year;
++
++ days = time / 86400;
++ time -= days * 86400;
++
++ tm->tm_wday = (days + 4) % 7;
++
++ year = 1970 + days / 365;
++ days -= (year - 1970) * 365
++ + LEAPS_THRU_END_OF(year - 1)
++ - LEAPS_THRU_END_OF(1970 - 1);
++ if (days < 0) {
++ year -= 1;
++ days += 365 + LEAP_YEAR(year);
++ }
++ tm->tm_year = year - 1900;
++ tm->tm_yday = days + 1;
++
++ for (month = 0; month < 11; month++) {
++ int newdays;
++
++ newdays = days - rtc_month_days(month, year);
++ if (newdays < 0)
++ break;
++ days = newdays;
++ }
++ tm->tm_mon = month;
++ tm->tm_mday = days + 1;
++
++ tm->tm_hour = time / 3600;
++ time -= tm->tm_hour * 3600;
++ tm->tm_min = time / 60;
++ tm->tm_sec = time - tm->tm_min * 60;
++}
++EXPORT_SYMBOL(rtc_time_to_tm);
++
++/*
++ * Does the rtc_time represent a valid date/time?
++ */
++int rtc_valid_tm(struct rtc_time *tm)
++{
++ if (tm->tm_year < 70 ||
++ tm->tm_mon >= 12 ||
++ tm->tm_mday < 1 ||
++ tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year + 1900) ||
++ tm->tm_hour >= 24 ||
++ tm->tm_min >= 60 ||
++ tm->tm_sec >= 60)
++ return -EINVAL;
++
++ return 0;
++}
++EXPORT_SYMBOL(rtc_valid_tm);
++
++/*
++ * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
++ */
++int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
++{
++ *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
++ tm->tm_hour, tm->tm_min, tm->tm_sec);
++ return 0;
++}
++EXPORT_SYMBOL(rtc_tm_to_time);
+--- linux-nslu2.orig/arch/arm/Kconfig 2006-01-04 01:27:04.000000000 +0100
++++ linux-nslu2/arch/arm/Kconfig 2006-01-04 01:27:31.000000000 +0100
+@@ -750,6 +750,8 @@ source "drivers/usb/Kconfig"
+
+ source "drivers/mmc/Kconfig"
+
++source "drivers/rtc/Kconfig"
++
+ endmenu
+
+ source "fs/Kconfig"
+--- linux-nslu2.orig/arch/arm/common/rtctime.c 2006-01-04 01:27:04.000000000 +0100
++++ linux-nslu2/arch/arm/common/rtctime.c 2006-01-04 01:27:09.000000000 +0100
+@@ -40,89 +40,6 @@ static struct rtc_ops *rtc_ops;
+
+ #define rtc_epoch 1900UL
+
+-static const unsigned char days_in_month[] = {
+- 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
+-};
+-
+-#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
+-#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
+-
+-static int month_days(unsigned int month, unsigned int year)
+-{
+- return days_in_month[month] + (LEAP_YEAR(year) && month == 1);
+-}
+-
+-/*
+- * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
+- */
+-void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
+-{
+- int days, month, year;
+-
+- days = time / 86400;
+- time -= days * 86400;
+-
+- tm->tm_wday = (days + 4) % 7;
+-
+- year = 1970 + days / 365;
+- days -= (year - 1970) * 365
+- + LEAPS_THRU_END_OF(year - 1)
+- - LEAPS_THRU_END_OF(1970 - 1);
+- if (days < 0) {
+- year -= 1;
+- days += 365 + LEAP_YEAR(year);
+- }
+- tm->tm_year = year - 1900;
+- tm->tm_yday = days + 1;
+-
+- for (month = 0; month < 11; month++) {
+- int newdays;
+-
+- newdays = days - month_days(month, year);
+- if (newdays < 0)
+- break;
+- days = newdays;
+- }
+- tm->tm_mon = month;
+- tm->tm_mday = days + 1;
+-
+- tm->tm_hour = time / 3600;
+- time -= tm->tm_hour * 3600;
+- tm->tm_min = time / 60;
+- tm->tm_sec = time - tm->tm_min * 60;
+-}
+-EXPORT_SYMBOL(rtc_time_to_tm);
+-
+-/*
+- * Does the rtc_time represent a valid date/time?
+- */
+-int rtc_valid_tm(struct rtc_time *tm)
+-{
+- if (tm->tm_year < 70 ||
+- tm->tm_mon >= 12 ||
+- tm->tm_mday < 1 ||
+- tm->tm_mday > month_days(tm->tm_mon, tm->tm_year + 1900) ||
+- tm->tm_hour >= 24 ||
+- tm->tm_min >= 60 ||
+- tm->tm_sec >= 60)
+- return -EINVAL;
+-
+- return 0;
+-}
+-EXPORT_SYMBOL(rtc_valid_tm);
+-
+-/*
+- * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
+- */
+-int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
+-{
+- *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
+- tm->tm_hour, tm->tm_min, tm->tm_sec);
+-
+- return 0;
+-}
+-EXPORT_SYMBOL(rtc_tm_to_time);
+-
+ /*
+ * Calculate the next alarm time given the requested alarm time mask
+ * and the current time.
+@@ -141,13 +58,13 @@ void rtc_next_alarm_time(struct rtc_time
+ next->tm_sec = alrm->tm_sec;
+ }
+
+-static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm)
++static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
+ {
+ memset(tm, 0, sizeof(struct rtc_time));
+ return ops->read_time(tm);
+ }
+
+-static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm)
++static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm)
+ {
+ int ret;
+
+@@ -158,7 +75,7 @@ static inline int rtc_set_time(struct rt
+ return ret;
+ }
+
+-static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
++static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
+ {
+ int ret = -EINVAL;
+ if (ops->read_alarm) {
+@@ -168,7 +85,7 @@ static inline int rtc_read_alarm(struct
+ return ret;
+ }
+
+-static inline int rtc_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
++static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
+ {
+ int ret = -EINVAL;
+ if (ops->set_alarm)
+@@ -256,7 +173,7 @@ static int rtc_ioctl(struct inode *inode
+
+ switch (cmd) {
+ case RTC_ALM_READ:
+- ret = rtc_read_alarm(ops, &alrm);
++ ret = rtc_arm_read_alarm(ops, &alrm);
+ if (ret)
+ break;
+ ret = copy_to_user(uarg, &alrm.time, sizeof(tm));
+@@ -278,11 +195,11 @@ static int rtc_ioctl(struct inode *inode
+ alrm.time.tm_wday = -1;
+ alrm.time.tm_yday = -1;
+ alrm.time.tm_isdst = -1;
+- ret = rtc_set_alarm(ops, &alrm);
++ ret = rtc_arm_set_alarm(ops, &alrm);
+ break;
+
+ case RTC_RD_TIME:
+- ret = rtc_read_time(ops, &tm);
++ ret = rtc_arm_read_time(ops, &tm);
+ if (ret)
+ break;
+ ret = copy_to_user(uarg, &tm, sizeof(tm));
+@@ -300,7 +217,7 @@ static int rtc_ioctl(struct inode *inode
+ ret = -EFAULT;
+ break;
+ }
+- ret = rtc_set_time(ops, &tm);
++ ret = rtc_arm_set_time(ops, &tm);
+ break;
+
+ case RTC_EPOCH_SET:
+@@ -331,11 +248,11 @@ static int rtc_ioctl(struct inode *inode
+ ret = -EFAULT;
+ break;
+ }
+- ret = rtc_set_alarm(ops, &alrm);
++ ret = rtc_arm_set_alarm(ops, &alrm);
+ break;
+
+ case RTC_WKALM_RD:
+- ret = rtc_read_alarm(ops, &alrm);
++ ret = rtc_arm_read_alarm(ops, &alrm);
+ if (ret)
+ break;
+ ret = copy_to_user(uarg, &alrm, sizeof(alrm));
+@@ -425,7 +342,7 @@ static int rtc_read_proc(char *page, cha
+ struct rtc_time tm;
+ char *p = page;
+
+- if (rtc_read_time(ops, &tm) == 0) {
++ if (rtc_arm_read_time(ops, &tm) == 0) {
+ p += sprintf(p,
+ "rtc_time\t: %02d:%02d:%02d\n"
+ "rtc_date\t: %04d-%02d-%02d\n"
+@@ -435,7 +352,7 @@ static int rtc_read_proc(char *page, cha
+ rtc_epoch);
+ }
+
+- if (rtc_read_alarm(ops, &alrm) == 0) {
++ if (rtc_arm_read_alarm(ops, &alrm) == 0) {
+ p += sprintf(p, "alrm_time\t: ");
+ if ((unsigned int)alrm.time.tm_hour <= 24)
+ p += sprintf(p, "%02d:", alrm.time.tm_hour);
+--- linux-nslu2.orig/include/asm-arm/rtc.h 2006-01-04 01:27:04.000000000 +0100
++++ linux-nslu2/include/asm-arm/rtc.h 2006-01-04 01:27:09.000000000 +0100
+@@ -25,9 +25,6 @@ struct rtc_ops {
+ int (*proc)(char *buf);
+ };
+
+-void rtc_time_to_tm(unsigned long, struct rtc_time *);
+-int rtc_tm_to_time(struct rtc_time *, unsigned long *);
+-int rtc_valid_tm(struct rtc_time *);
+ void rtc_next_alarm_time(struct rtc_time *, struct rtc_time *, struct rtc_time *);
+ void rtc_update(unsigned long, unsigned long);
+ int register_rtc(struct rtc_ops *);
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-nslu2/drivers/rtc/rtc-sysfs.c 2006-01-04 01:27:12.000000000 +0100
+@@ -0,0 +1,125 @@
++/*
++ * RTC subsystem, sysfs interface
++ *
++ * Copyright (C) 2005 Tower Technologies
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License.
++*/
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++
++/* device attributes */
++
++static ssize_t rtc_sysfs_show_name(struct class_device *dev, char *buf)
++{
++ return sprintf(buf, "%s\n", to_rtc_device(dev)->name);
++}
++static CLASS_DEVICE_ATTR(name, S_IRUGO, rtc_sysfs_show_name, NULL);
++
++static ssize_t rtc_sysfs_show_date(struct class_device *dev, char *buf)
++{
++ ssize_t retval = 0;
++ struct rtc_device *rtc = to_rtc_device(dev);
++ struct rtc_time tm;
++
++ if (down_read_trylock(&rtc->lock) == 0)
++ return -ENODEV;
++
++ if (rtc_read_time(dev, &tm) == 0) {
++ retval = sprintf(buf, "%04d-%02d-%02d\n",
++ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
++ }
++
++ up_read(&rtc->lock);
++ return retval;
++}
++static CLASS_DEVICE_ATTR(date, S_IRUGO, rtc_sysfs_show_date, NULL);
++
++static ssize_t rtc_sysfs_show_time(struct class_device *dev, char *buf)
++{
++ ssize_t retval = 0;
++ struct rtc_device *rtc = to_rtc_device(dev);
++ struct rtc_time tm;
++
++ if (down_read_trylock(&rtc->lock) == 0)
++ return -ENODEV;
++
++ if (rtc_read_time(dev, &tm) == 0) {
++ retval = sprintf(buf, "%02d:%02d:%02d\n",
++ tm.tm_hour, tm.tm_min, tm.tm_sec);
++ }
++
++ up_read(&rtc->lock);
++ return retval;
++}
++static CLASS_DEVICE_ATTR(time, S_IRUGO, rtc_sysfs_show_time, NULL);
++
++static ssize_t rtc_sysfs_show_since_epoch(struct class_device *dev, char *buf)
++{
++ ssize_t retval = 0;
++ struct rtc_device *rtc = to_rtc_device(dev);
++ struct rtc_time tm;
++
++ if (down_read_trylock(&rtc->lock) == 0)
++ return -ENODEV;
++
++ if (rtc_read_time(dev, &tm) == 0) {
++ unsigned long time;
++ rtc_tm_to_time(&tm, &time);
++ retval = sprintf(buf, "%lu\n", time);
++ }
++
++ up_read(&rtc->lock);
++ return retval;
++}
++static CLASS_DEVICE_ATTR(since_epoch, S_IRUGO, rtc_sysfs_show_since_epoch, NULL);
++
++/* insertion/removal hooks */
++
++static int __devinit rtc_sysfs_add_device(struct class_device *class_dev,
++ struct class_interface *class_intf)
++{
++ class_device_create_file(class_dev, &class_device_attr_name);
++ class_device_create_file(class_dev, &class_device_attr_date);
++ class_device_create_file(class_dev, &class_device_attr_time);
++ class_device_create_file(class_dev, &class_device_attr_since_epoch);
++ dev_info(class_dev->dev, "rtc intf: sysfs\n");
++ return 0;
++}
++
++static void rtc_sysfs_remove_device(struct class_device *class_dev,
++ struct class_interface *class_intf)
++{
++ class_device_remove_file(class_dev, &class_device_attr_name);
++ class_device_remove_file(class_dev, &class_device_attr_date);
++ class_device_remove_file(class_dev, &class_device_attr_time);
++ class_device_remove_file(class_dev, &class_device_attr_since_epoch);
++}
++
++/* interface registration */
++
++struct class_interface rtc_sysfs_interface = {
++ .add = &rtc_sysfs_add_device,
++ .remove = &rtc_sysfs_remove_device,
++};
++
++static int __init rtc_sysfs_init(void)
++{
++ return rtc_interface_register(&rtc_sysfs_interface);
++}
++
++static void __exit rtc_sysfs_exit(void)
++{
++ class_interface_unregister(&rtc_sysfs_interface);
++}
++
++module_init(rtc_sysfs_init);
++module_exit(rtc_sysfs_exit);
++
++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
++MODULE_DESCRIPTION("RTC class sysfs interface");
++MODULE_LICENSE("GPL");
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-nslu2/drivers/rtc/rtc-proc.c 2006-01-04 01:27:14.000000000 +0100
+@@ -0,0 +1,158 @@
++/*
++ * RTC subsystem, proc interface
++ *
++ * Copyright (C) 2005 Tower Technologies
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * based on arch/arm/common/rtctime.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License.
++*/
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++#include <linux/proc_fs.h>
++#include <linux/seq_file.h>
++
++static struct class_device *rtc_dev = NULL;
++static DECLARE_MUTEX(rtc_sem);
++
++static int rtc_proc_show(struct seq_file *seq, void *offset)
++{
++ struct class_device *class_dev = seq->private;
++ struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops;
++ struct rtc_wkalrm alrm;
++ struct rtc_time tm;
++
++ if (rtc_read_time(class_dev, &tm) == 0) {
++ seq_printf(seq,
++ "rtc_time\t: %02d:%02d:%02d\n"
++ "rtc_date\t: %04d-%02d-%02d\n",
++ tm.tm_hour, tm.tm_min, tm.tm_sec,
++ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
++ }
++
++ if (rtc_read_alarm(class_dev, &alrm) == 0) {
++ seq_printf(seq, "alrm_time\t: ");
++ if ((unsigned int)alrm.time.tm_hour <= 24)
++ seq_printf(seq, "%02d:", alrm.time.tm_hour);
++ else
++ seq_printf(seq, "**:");
++ if ((unsigned int)alrm.time.tm_min <= 59)
++ seq_printf(seq, "%02d:", alrm.time.tm_min);
++ else
++ seq_printf(seq, "**:");
++ if ((unsigned int)alrm.time.tm_sec <= 59)
++ seq_printf(seq, "%02d\n", alrm.time.tm_sec);
++ else
++ seq_printf(seq, "**\n");
++
++ seq_printf(seq, "alrm_date\t: ");
++ if ((unsigned int)alrm.time.tm_year <= 200)
++ seq_printf(seq, "%04d-", alrm.time.tm_year + 1900);
++ else
++ seq_printf(seq, "****-");
++ if ((unsigned int)alrm.time.tm_mon <= 11)
++ seq_printf(seq, "%02d-", alrm.time.tm_mon + 1);
++ else
++ seq_printf(seq, "**-");
++ if ((unsigned int)alrm.time.tm_mday <= 31)
++ seq_printf(seq, "%02d\n", alrm.time.tm_mday);
++ else
++ seq_printf(seq, "**\n");
++ seq_printf(seq, "alrm_wakeup\t: %s\n",
++ alrm.enabled ? "yes" : "no");
++ seq_printf(seq, "alrm_pending\t: %s\n",
++ alrm.pending ? "yes" : "no");
++ }
++
++ if (ops->proc)
++ ops->proc(class_dev->dev, seq);
++
++ return 0;
++}
++
++static int rtc_proc_open(struct inode *inode, struct file *file)
++{
++ struct class_device *class_dev = PDE(inode)->data;
++
++ if (!try_module_get(THIS_MODULE))
++ return -ENODEV;
++
++ return single_open(file, rtc_proc_show, class_dev);
++}
++
++static int rtc_proc_release(struct inode *inode, struct file *file)
++{
++ int res = single_release(inode, file);
++ module_put(THIS_MODULE);
++ return res;
++}
++
++static struct file_operations rtc_proc_fops = {
++ .open = rtc_proc_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = rtc_proc_release,
++};
++
++static int rtc_proc_add_device(struct class_device *class_dev,
++ struct class_interface *class_intf)
++{
++ down(&rtc_sem);
++ if (rtc_dev == NULL) {
++ struct proc_dir_entry *ent;
++
++ rtc_dev = class_dev;
++
++ if ((ent = create_proc_entry("driver/rtc", 0, NULL))) {
++ struct rtc_device *rtc = to_rtc_device(class_dev);
++
++ ent->proc_fops = &rtc_proc_fops;
++ ent->owner = rtc->owner;
++ ent->data = class_dev;
++
++ dev_info(class_dev->dev, "rtc intf: proc\n");
++ }
++ else
++ rtc_dev = NULL;
++ }
++ up(&rtc_sem);
++
++ return 0;
++}
++
++static void rtc_proc_remove_device(struct class_device *class_dev,
++ struct class_interface *class_intf)
++{
++ down(&rtc_sem);
++ if (rtc_dev == class_dev) {
++ remove_proc_entry("driver/rtc", NULL);
++ rtc_dev = NULL;
++ }
++ up(&rtc_sem);
++}
++
++struct class_interface rtc_proc_interface = {
++ .add = &rtc_proc_add_device,
++ .remove = &rtc_proc_remove_device,
++};
++
++static int __init rtc_proc_init(void)
++{
++ return rtc_interface_register(&rtc_proc_interface);
++}
++
++static void __exit rtc_proc_exit(void)
++{
++ class_interface_unregister(&rtc_proc_interface);
++}
++
++module_init(rtc_proc_init);
++module_exit(rtc_proc_exit);
++
++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
++MODULE_DESCRIPTION("RTC class proc interface");
++MODULE_LICENSE("GPL");
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-nslu2/drivers/rtc/rtc-dev.c 2006-01-04 01:27:15.000000000 +0100
+@@ -0,0 +1,372 @@
++/*
++ * RTC subsystem, dev interface
++ *
++ * Copyright (C) 2005 Tower Technologies
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * based on arch/arm/common/rtctime.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; version 2 of the License.
++*/
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++
++static dev_t rtc_devt;
++
++#define RTC_DEV_MAX 16 /* 16 RTCs should be enough for everyone... */
++
++static int rtc_dev_open(struct inode *inode, struct file *file)
++{
++ int err;
++ struct rtc_device *rtc = container_of(inode->i_cdev,
++ struct rtc_device, char_dev);
++ struct rtc_class_ops *ops = rtc->ops;
++
++ /* We keep the lock as long as the device is in use
++ * and return immediately if busy
++ */
++ if (down_trylock(&rtc->char_sem))
++ return -EBUSY;
++
++ file->private_data = &rtc->class_dev;
++
++ err = ops->open ? ops->open(rtc->class_dev.dev) : 0;
++ if (err == 0) {
++
++ spin_lock_irq(&rtc->irq_lock);
++ rtc->irq_data = 0;
++ spin_unlock_irq(&rtc->irq_lock);
++
++ return 0;
++ }
++
++ /* something has gone wrong, release the lock */
++ up(&rtc->char_sem);
++ return err;
++}
++
++
++static ssize_t
++rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
++{
++ struct rtc_device *rtc = to_rtc_device(file->private_data);
++
++ DECLARE_WAITQUEUE(wait, current);
++ unsigned long data;
++ ssize_t ret;
++
++ if (count < sizeof(unsigned long))
++ return -EINVAL;
++
++ add_wait_queue(&rtc->irq_queue, &wait);
++ do {
++ __set_current_state(TASK_INTERRUPTIBLE);
++
++ spin_lock_irq(&rtc->irq_lock);
++ data = rtc->irq_data;
++ rtc->irq_data = 0;
++ spin_unlock_irq(&rtc->irq_lock);
++
++ if (data != 0) {
++ ret = 0;
++ break;
++ }
++ if (file->f_flags & O_NONBLOCK) {
++ ret = -EAGAIN;
++ break;
++ }
++ if (signal_pending(current)) {
++ ret = -ERESTARTSYS;
++ break;
++ }
++ schedule();
++ } while (1);
++ set_current_state(TASK_RUNNING);
++ remove_wait_queue(&rtc->irq_queue, &wait);
++
++ if (ret == 0) {
++ ret = put_user(data, (unsigned long __user *)buf);
++ if (ret == 0)
++ ret = sizeof(unsigned long);
++ }
++ return ret;
++}
++
++static unsigned int rtc_dev_poll(struct file *file, poll_table *wait)
++{
++ struct rtc_device *rtc = to_rtc_device(file->private_data);
++ unsigned long data;
++
++ poll_wait(file, &rtc->irq_queue, wait);
++
++ spin_lock_irq(&rtc->irq_lock);
++ data = rtc->irq_data;
++ spin_unlock_irq(&rtc->irq_lock);
++
++ return data != 0 ? POLLIN | POLLRDNORM : 0;
++}
++
++static int rtc_dev_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
++ unsigned long arg)
++{
++ int err = 0;
++ struct class_device *class_dev = file->private_data;
++ struct rtc_device *rtc = to_rtc_device(class_dev);
++ struct rtc_class_ops *ops = rtc->ops;
++ struct rtc_time tm;
++ struct rtc_wkalrm alarm;
++ void __user *uarg = (void __user *) arg;
++
++ /* avoid conflicting IRQ users */
++ if (cmd == RTC_PIE_ON || cmd == RTC_PIE_OFF || cmd == RTC_IRQP_SET) {
++ spin_lock(&rtc->irq_task_lock);
++ if (rtc->irq_task)
++ err = -EBUSY;
++ spin_unlock(&rtc->irq_task_lock);
++
++ if (err < 0)
++ return err;
++ }
++
++ /* try the driver's ioctl interface */
++ if (ops->ioctl) {
++ err = ops->ioctl(class_dev->dev, cmd, arg);
++ if (err < 0 && err != -EINVAL)
++ return err;
++ }
++
++ /* if the driver does not provide the ioctl interface
++ * or if that particular ioctl was not implemented
++ * (-EINVAL), we will try to emulate here.
++ */
++
++ switch (cmd) {
++ case RTC_ALM_READ:
++ if ((err = rtc_read_alarm(class_dev, &alarm)) < 0)
++ return err;
++
++ if ((err = copy_to_user(uarg, &alarm.time, sizeof(tm))))
++ return -EFAULT;
++ break;
++
++ case RTC_ALM_SET:
++ if ((err = copy_from_user(&alarm.time, uarg, sizeof(tm))))
++ return -EFAULT;
++
++ alarm.enabled = 0;
++ alarm.pending = 0;
++ alarm.time.tm_mday = -1;
++ alarm.time.tm_mon = -1;
++ alarm.time.tm_year = -1;
++ alarm.time.tm_wday = -1;
++ alarm.time.tm_yday = -1;
++ alarm.time.tm_isdst = -1;
++ err = rtc_set_alarm(class_dev, &alarm);
++ break;
++
++ case RTC_RD_TIME:
++ if ((err = rtc_read_time(class_dev, &tm)) < 0)
++ return err;
++
++ if ((err = copy_to_user(uarg, &tm, sizeof(tm))))
++ return -EFAULT;
++ break;
++
++ case RTC_SET_TIME:
++ if (!capable(CAP_SYS_TIME))
++ return -EACCES;
++
++ if ((err = copy_from_user(&tm, uarg, sizeof(tm))))
++ return -EFAULT;
++
++ err = rtc_set_time(class_dev, &tm);
++ break;
++#if 0
++ case RTC_EPOCH_SET:
++#ifndef rtc_epoch
++ /*
++ * There were no RTC clocks before 1900.
++ */
++ if (arg < 1900) {
++ err = -EINVAL;
++ break;
++ }
++ if (!capable(CAP_SYS_TIME)) {
++ err = -EACCES;
++ break;
++ }
++ rtc_epoch = arg;
++ err = 0;
++#endif
++ break;
++
++ case RTC_EPOCH_READ:
++ err = put_user(rtc_epoch, (unsigned long __user *)uarg);
++ break;
++#endif
++ case RTC_WKALM_SET:
++ if ((err = copy_from_user(&alarm, uarg, sizeof(alarm))))
++ return -EFAULT;
++
++ err = rtc_set_alarm(class_dev, &alarm);
++ break;
++
++ case RTC_WKALM_RD:
++ if ((err = rtc_read_alarm(class_dev, &alarm)) < 0)
++ return err;
++
++ if ((err = copy_to_user(uarg, &alarm, sizeof(alarm))))
++ return -EFAULT;
++ break;
++
++ default:
++ err = -EINVAL;
++ break;
++ }
++
++ return err;
++}
++
++static int rtc_dev_release(struct inode *inode, struct file *file)
++{
++ struct rtc_device *rtc = to_rtc_device(file->private_data);
++
++ if (rtc->ops->release)
++ rtc->ops->release(rtc->class_dev.dev);
++
++ spin_lock_irq(&rtc->irq_lock);
++ rtc->irq_data = 0;
++ spin_unlock_irq(&rtc->irq_lock);
++
++ up(&rtc->char_sem);
++ return 0;
++}
++
++static int rtc_dev_fasync(int fd, struct file *file, int on)
++{
++ struct rtc_device *rtc = to_rtc_device(file->private_data);
++ return fasync_helper(fd, file, on, &rtc->async_queue);
++}
++
++static struct file_operations rtc_dev_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .read = rtc_dev_read,
++ .poll = rtc_dev_poll,
++ .ioctl = rtc_dev_ioctl,
++ .open = rtc_dev_open,
++ .release = rtc_dev_release,
++ .fasync = rtc_dev_fasync,
++};
++
++static ssize_t rtc_dev_show_dev(struct class_device *class_dev, char *buf)
++{
++ return print_dev_t(buf, class_dev->devt);
++}
++static CLASS_DEVICE_ATTR(dev, S_IRUGO, rtc_dev_show_dev, NULL);
++
++/* insertion/removal hooks */
++
++static int rtc_dev_add_device(struct class_device *class_dev,
++ struct class_interface *class_intf)
++{
++ struct rtc_device *rtc = to_rtc_device(class_dev);
++
++ if (rtc->id >= RTC_DEV_MAX) {
++ dev_err(class_dev->dev, "too many RTCs\n");
++ return -EINVAL;
++ }
++
++ init_MUTEX(&rtc->char_sem);
++ spin_lock_init(&rtc->irq_lock);
++ init_waitqueue_head(&rtc->irq_queue);
++
++ cdev_init(&rtc->char_dev, &rtc_dev_fops);
++ rtc->char_dev.owner = rtc->owner;
++ class_dev->devt = MKDEV(MAJOR(rtc_devt), rtc->id);
++
++ if (cdev_add(&rtc->char_dev, class_dev->devt, 1)) {
++ cdev_del(&rtc->char_dev);
++
++ dev_err(class_dev->dev,
++ "failed to add char device %d:%d\n",
++ MAJOR(class_dev->devt),
++ MINOR(class_dev->devt));
++
++ class_dev->devt = MKDEV(0, 0);
++ return -ENODEV;
++ }
++
++ class_device_create_file(class_dev, &class_device_attr_dev);
++
++ dev_info(class_dev->dev, "rtc intf: dev (%d:%d)\n",
++ MAJOR(class_dev->devt),
++ MINOR(class_dev->devt));
++
++ kobject_hotplug(&class_dev->kobj, KOBJ_ADD);
++
++ return 0;
++}
++
++static void rtc_dev_remove_device(struct class_device *class_dev,
++ struct class_interface *class_intf)
++{
++ struct rtc_device *rtc = to_rtc_device(class_dev);
++
++ class_device_remove_file(class_dev, &class_device_attr_dev);
++
++ if (MAJOR(class_dev->devt)) {
++ dev_dbg(class_dev->dev, "removing char %d:%d\n",
++ MAJOR(class_dev->devt),
++ MINOR(class_dev->devt));
++ cdev_del(&rtc->char_dev);
++
++ kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);
++
++ class_dev->devt = MKDEV(0, 0);
++ }
++}
++
++/* interface registration */
++
++struct class_interface rtc_dev_interface = {
++ .add = &rtc_dev_add_device,
++ .remove = &rtc_dev_remove_device,
++};
++
++static int __init rtc_dev_init(void)
++{
++ int err;
++
++ if ((err = alloc_chrdev_region(&rtc_devt, 0, RTC_DEV_MAX, "rtc")) < 0) {
++ printk(KERN_ERR "%s: failed to allocate char dev region\n",
++ __FILE__);
++ return err;
++ }
++
++ if ((err = rtc_interface_register(&rtc_dev_interface)) < 0) {
++ printk(KERN_ERR "%s: failed to register the interface\n",
++ __FILE__);
++ unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
++ return err;
++ }
++
++ return 0;
++}
++
++static void __exit rtc_dev_exit(void)
++{
++ class_interface_unregister(&rtc_dev_interface);
++
++ unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
++}
++
++module_init(rtc_dev_init);
++module_exit(rtc_dev_exit);
++
++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
++MODULE_DESCRIPTION("RTC class dev interface");
++MODULE_LICENSE("GPL");
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-nslu2/drivers/rtc/rtc-x1205.c 2006-01-04 01:27:17.000000000 +0100
+@@ -0,0 +1,725 @@
++/*
++ * An i2c driver for the Xicor/Intersil X1205 RTC
++ * Copyright 2004 Karen Spearel
++ * Copyright 2005 Alessandro Zummo
++ *
++ * please send all reports to:
++ * kas11 at tampabay dot rr dot com
++ * a dot zummo at towertech dot it
++ *
++ * based on a lot of other RTC drivers.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/err.h>
++#include <linux/i2c.h>
++#include <linux/string.h>
++#include <linux/bcd.h>
++#include <linux/rtc.h>
++#include <linux/delay.h>
++
++#define DRV_VERSION "1.0.5"
++
++/* Addresses to scan: none. This chip is located at
++ * 0x6f and uses a two bytes register addressing.
++ * Two bytes need to be written to read a single register,
++ * while most other chips just require one and take the second
++ * one as the data to be written. To prevent corrupting
++ * unknown chips, the user must explicitely set the probe parameter.
++ */
++
++static unsigned short normal_i2c[] = { I2C_CLIENT_END };
++
++/* Insmod parameters */
++I2C_CLIENT_INSMOD;
++I2C_CLIENT_MODULE_PARM(hctosys,
++ "Set the system time from the hardware clock upon initialization");
++
++/* offsets into CCR area */
++
++#define CCR_SEC 0
++#define CCR_MIN 1
++#define CCR_HOUR 2
++#define CCR_MDAY 3
++#define CCR_MONTH 4
++#define CCR_YEAR 5
++#define CCR_WDAY 6
++#define CCR_Y2K 7
++
++#define X1205_REG_SR 0x3F /* status register */
++#define X1205_REG_Y2K 0x37
++#define X1205_REG_DW 0x36
++#define X1205_REG_YR 0x35
++#define X1205_REG_MO 0x34
++#define X1205_REG_DT 0x33
++#define X1205_REG_HR 0x32
++#define X1205_REG_MN 0x31
++#define X1205_REG_SC 0x30
++#define X1205_REG_DTR 0x13
++#define X1205_REG_ATR 0x12
++#define X1205_REG_INT 0x11
++#define X1205_REG_0 0x10
++#define X1205_REG_Y2K1 0x0F
++#define X1205_REG_DWA1 0x0E
++#define X1205_REG_YRA1 0x0D
++#define X1205_REG_MOA1 0x0C
++#define X1205_REG_DTA1 0x0B
++#define X1205_REG_HRA1 0x0A
++#define X1205_REG_MNA1 0x09
++#define X1205_REG_SCA1 0x08
++#define X1205_REG_Y2K0 0x07
++#define X1205_REG_DWA0 0x06
++#define X1205_REG_YRA0 0x05
++#define X1205_REG_MOA0 0x04
++#define X1205_REG_DTA0 0x03
++#define X1205_REG_HRA0 0x02
++#define X1205_REG_MNA0 0x01
++#define X1205_REG_SCA0 0x00
++
++#define X1205_CCR_BASE 0x30 /* Base address of CCR */
++#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
++
++#define X1205_SR_RTCF 0x01 /* Clock failure */
++#define X1205_SR_WEL 0x02 /* Write Enable Latch */
++#define X1205_SR_RWEL 0x04 /* Register Write Enable */
++
++#define X1205_DTR_DTR0 0x01
++#define X1205_DTR_DTR1 0x02
++#define X1205_DTR_DTR2 0x04
++
++#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
++
++/* Prototypes */
++static int x1205_attach(struct i2c_adapter *adapter);
++static int x1205_detach(struct i2c_client *client);
++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
++
++static struct i2c_driver x1205_driver = {
++ .owner = THIS_MODULE,
++ .name = "x1205",
++ .flags = I2C_DF_NOTIFY,
++ .attach_adapter = &x1205_attach,
++ .detach_client = &x1205_detach,
++};
++
++/*
++ * In the routines that deal directly with the x1205 hardware, we use
++ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
++ * Epoch is initialized as 2000. Time is set to UTC.
++ */
++static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
++ unsigned char reg_base)
++{
++ unsigned char dt_addr[2] = { 0, reg_base };
++
++ unsigned char buf[8];
++
++ struct i2c_msg msgs[] = {
++ { client->addr, 0, 2, dt_addr }, /* setup read ptr */
++ { client->addr, I2C_M_RD, 8, buf }, /* read date */
++ };
++
++ /* read date registers */
++ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
++ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
++ return -EIO;
++ }
++
++ dev_dbg(&client->dev,
++ "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
++ "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
++ __FUNCTION__,
++ buf[0], buf[1], buf[2], buf[3],
++ buf[4], buf[5], buf[6], buf[7]);
++
++ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
++ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
++ tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
++ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
++ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
++ tm->tm_year = BCD2BIN(buf[CCR_YEAR])
++ + (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900;
++ tm->tm_wday = buf[CCR_WDAY];
++
++ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
++ "mday=%d, mon=%d, year=%d, wday=%d\n",
++ __FUNCTION__,
++ tm->tm_sec, tm->tm_min, tm->tm_hour,
++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
++
++ return 0;
++}
++
++static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
++{
++ static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
++
++ struct i2c_msg msgs[] = {
++ { client->addr, 0, 2, sr_addr }, /* setup read ptr */
++ { client->addr, I2C_M_RD, 1, sr }, /* read status */
++ };
++
++ /* read status register */
++ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
++ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
++ int datetoo, u8 reg_base)
++{
++ int i, xfer;
++ unsigned char buf[8];
++
++ static const unsigned char wel[3] = { 0, X1205_REG_SR,
++ X1205_SR_WEL };
++
++ static const unsigned char rwel[3] = { 0, X1205_REG_SR,
++ X1205_SR_WEL | X1205_SR_RWEL };
++
++ static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
++
++ dev_dbg(&client->dev,
++ "%s: secs=%d, mins=%d, hours=%d\n",
++ __FUNCTION__,
++ tm->tm_sec, tm->tm_min, tm->tm_hour);
++
++ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
++ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
++
++ /* set hour and 24hr bit */
++ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
++
++ /* should we also set the date? */
++ if (datetoo) {
++ dev_dbg(&client->dev,
++ "%s: mday=%d, mon=%d, year=%d, wday=%d\n",
++ __FUNCTION__,
++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
++
++ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
++
++ /* month, 1 - 12 */
++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1);
++
++ /* year, since the rtc epoch*/
++ buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100);
++ buf[CCR_WDAY] = tm->tm_wday & 0x07;
++ buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
++ }
++
++ /* this sequence is required to unlock the chip */
++ xfer = i2c_master_send(client, wel, 3);
++ if (xfer != 3) {
++ dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
++ return -EIO;
++ }
++
++ xfer = i2c_master_send(client, rwel, 3);
++ if (xfer != 3) {
++ dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
++ return -EIO;
++ }
++
++ /* write register's data */
++ for (i = 0; i < (datetoo ? 8 : 3); i++) {
++ unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
++
++ xfer = i2c_master_send(client, rdata, 3);
++ if (xfer != 3) {
++ dev_err(&client->dev,
++ "%s: xfer=%d addr=%02x, data=%02x\n",
++ __FUNCTION__,
++ xfer, rdata[1], rdata[2]);
++ return -EIO;
++ }
++ };
++
++ /* disable further writes */
++ xfer = i2c_master_send(client, diswe, 3);
++ if (xfer != 3) {
++ dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static int x1205_fix_osc(struct i2c_client *client)
++{
++ int err;
++ struct rtc_time tm;
++
++ tm.tm_hour = 0;
++ tm.tm_min = 0;
++ tm.tm_sec = 0;
++
++ if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
++ dev_err(&client->dev,
++ "unable to restart the clock\n");
++
++ return err;
++}
++
++static int x1205_get_dtrim(struct i2c_client *client, int *trim)
++{
++ unsigned char dtr;
++ static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
++
++ struct i2c_msg msgs[] = {
++ { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
++ { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
++ };
++
++ /* read dtr register */
++ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
++ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
++ return -EIO;
++ }
++
++ dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
++
++ *trim = 0;
++
++ if (dtr & X1205_DTR_DTR0)
++ *trim += 20;
++
++ if (dtr & X1205_DTR_DTR1)
++ *trim += 10;
++
++ if (dtr & X1205_DTR_DTR2)
++ *trim = -*trim;
++
++ return 0;
++}
++
++static int x1205_get_atrim(struct i2c_client *client, int *trim)
++{
++ s8 atr;
++ static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
++
++ struct i2c_msg msgs[] = {
++ { client->addr, 0, 2, atr_addr }, /* setup read ptr */
++ { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
++ };
++
++ /* read atr register */
++ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
++ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
++ return -EIO;
++ }
++
++ dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
++
++ /* atr is a two's complement value on 6 bits,
++ * perform sign extension. The formula is
++ * Catr = (atr * 0.25pF) + 11.00pF.
++ */
++ if (atr & 0x20)
++ atr |= 0xC0;
++
++ dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
++
++ *trim = (atr * 250) + 11000;
++
++ dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
++
++ return 0;
++}
++
++static int x1205_hctosys(struct i2c_client *client)
++{
++ int err;
++
++ struct rtc_time tm;
++ struct timespec tv;
++ unsigned char sr;
++
++ if ((err = x1205_get_status(client, &sr)) < 0)
++ return err;
++
++ /* Don't set if we had a power failure */
++ if (sr & X1205_SR_RTCF)
++ return -EINVAL;
++
++ if ((err = x1205_get_datetime(client, &tm, X1205_CCR_BASE)) < 0)
++ return err;
++
++ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
++ * whether it stores the most close value or the value with partial
++ * seconds truncated. However, it is important that we use it to store
++ * the truncated value. This is because otherwise it is necessary,
++ * in an rtc sync function, to read both xtime.tv_sec and
++ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
++ * of >32bits is not possible. So storing the most close value would
++ * slow down the sync API. So here we have the truncated value and
++ * the best guess is to add 0.5s.
++ */
++
++ tv.tv_nsec = NSEC_PER_SEC >> 1;
++
++ rtc_tm_to_time(&tm, &tv.tv_sec);
++
++ do_settimeofday(&tv);
++
++ dev_info(&client->dev,
++ "setting the system clock to %d-%d-%d %d:%d:%d\n",
++ tm.tm_year + 1900, tm.tm_mon + 1,
++ tm.tm_mday, tm.tm_hour, tm.tm_min,
++ tm.tm_sec);
++
++ return 0;
++}
++
++struct x1205_limit
++{
++ unsigned char reg;
++ unsigned char mask;
++ unsigned char min;
++ unsigned char max;
++};
++
++static int x1205_validate_client(struct i2c_client *client)
++{
++ int i, xfer;
++
++ /* Probe array. We will read the register at the specified
++ * address and check if the given bits are zero.
++ */
++ static const unsigned char probe_zero_pattern[] = {
++ /* register, mask */
++ X1205_REG_SR, 0x18,
++ X1205_REG_DTR, 0xF8,
++ X1205_REG_ATR, 0xC0,
++ X1205_REG_INT, 0x18,
++ X1205_REG_0, 0xFF,
++ };
++
++ static const struct x1205_limit probe_limits_pattern[] = {
++ /* register, mask, min, max */
++ { X1205_REG_Y2K, 0xFF, 19, 20 },
++ { X1205_REG_DW, 0xFF, 0, 6 },
++ { X1205_REG_YR, 0xFF, 0, 99 },
++ { X1205_REG_MO, 0xFF, 0, 12 },
++ { X1205_REG_DT, 0xFF, 0, 31 },
++ { X1205_REG_HR, 0x7F, 0, 23 },
++ { X1205_REG_MN, 0xFF, 0, 59 },
++ { X1205_REG_SC, 0xFF, 0, 59 },
++ { X1205_REG_Y2K1, 0xFF, 19, 20 },
++ { X1205_REG_Y2K0, 0xFF, 19, 20 },
++ };
++
++ /* check that registers have bits a 0 where expected */
++ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
++ unsigned char buf;
++
++ unsigned char addr[2] = { 0, probe_zero_pattern[i] };
++
++ struct i2c_msg msgs[2] = {
++ { client->addr, 0, 2, addr },
++ { client->addr, I2C_M_RD, 1, &buf },
++ };
++
++ xfer = i2c_transfer(client->adapter, msgs, 2);
++ if (xfer != 2) {
++ dev_err(&client->adapter->dev,
++ "%s: could not read register %x\n",
++ __FUNCTION__, addr[1]);
++
++ return -EIO;
++ }
++
++ if ((buf & probe_zero_pattern[i+1]) != 0) {
++ dev_err(&client->adapter->dev,
++ "%s: register=%02x, zero pattern=%d, value=%x\n",
++ __FUNCTION__, addr[1], i, buf);
++
++ return -ENODEV;
++ }
++ }
++
++ /* check limits (only registers with bcd values) */
++ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
++ unsigned char reg, value;
++
++ unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
++
++ struct i2c_msg msgs[2] = {
++ { client->addr, 0, 2, addr },
++ { client->addr, I2C_M_RD, 1, ® },
++ };
++
++ xfer = i2c_transfer(client->adapter, msgs, 2);
++
++ if (xfer != 2) {
++ dev_err(&client->adapter->dev,
++ "%s: could not read register %x\n",
++ __FUNCTION__, addr[1]);
++
++ return -EIO;
++ }
++
++ value = BCD2BIN(reg & probe_limits_pattern[i].mask);
++
++ if (value > probe_limits_pattern[i].max ||
++ value < probe_limits_pattern[i].min) {
++ dev_dbg(&client->adapter->dev,
++ "%s: register=%x, lim pattern=%d, value=%d\n",
++ __FUNCTION__, addr[1], i, value);
++
++ return -ENODEV;
++ }
++ }
++
++ return 0;
++}
++
++static int x1205_rtc_read_alarm(struct device *dev,
++ struct rtc_wkalrm *alrm)
++{
++ return x1205_get_datetime(to_i2c_client(dev),
++ &alrm->time, X1205_ALM0_BASE);
++}
++
++static int x1205_rtc_set_alarm(struct device *dev,
++ struct rtc_wkalrm *alrm)
++{
++ return x1205_set_datetime(to_i2c_client(dev),
++ &alrm->time, 1, X1205_ALM0_BASE);
++}
++
++static int x1205_rtc_read_time(struct device *dev,
++ struct rtc_time *tm)
++{
++ return x1205_get_datetime(to_i2c_client(dev),
++ tm, X1205_CCR_BASE);
++}
++
++static int x1205_rtc_set_time(struct device *dev,
++ struct rtc_time *tm)
++{
++ return x1205_set_datetime(to_i2c_client(dev),
++ tm, 1, X1205_CCR_BASE);
++}
++
++static int x1205_rtc_set_mmss(struct device *dev, unsigned long secs)
++{
++ int err;
++
++ struct rtc_time new_tm, old_tm;
++
++ if ((err = x1205_rtc_read_time(dev, &old_tm) == 0))
++ return err;
++
++ /* FIXME xtime.tv_nsec = old_tm.tm_sec * 10000000; */
++ new_tm.tm_sec = secs % 60;
++ secs /= 60;
++ new_tm.tm_min = secs % 60;
++ secs /= 60;
++ new_tm.tm_hour = secs % 24;
++
++ /*
++ * avoid writing when we're going to change the day
++ * of the month. We will retry in the next minute.
++ * This basically means that if the RTC must not drift
++ * by more than 1 minute in 11 minutes.
++ */
++ if ((old_tm.tm_hour == 23 && old_tm.tm_min == 59) ||
++ (new_tm.tm_hour == 23 && new_tm.tm_min == 59))
++ return 1;
++
++ return x1205_rtc_set_time(dev, &new_tm);
++}
++
++static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
++{
++ int err, dtrim, atrim;
++
++ seq_printf(seq, "24hr\t\t: yes\n");
++
++ err = x1205_get_dtrim(to_i2c_client(dev), &dtrim);
++ if (err == 0)
++ seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
++
++ err = x1205_get_atrim(to_i2c_client(dev), &atrim);
++ if (err == 0)
++ seq_printf(seq, "analog_trim\t: %d.%02d pF\n",
++ atrim / 1000, atrim % 1000);
++ return 0;
++}
++
++static struct rtc_class_ops x1205_rtc_ops = {
++ .proc = x1205_rtc_proc,
++ .read_time = x1205_rtc_read_time,
++ .set_time = x1205_rtc_set_time,
++ .read_alarm = x1205_rtc_read_alarm,
++ .set_alarm = x1205_rtc_set_alarm,
++ .set_mmss = x1205_rtc_set_mmss,
++};
++
++static ssize_t x1205_sysfs_show_atrim(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ int atrim;
++
++ if (x1205_get_atrim(to_i2c_client(dev), &atrim) == 0) {
++ return sprintf(buf, "%d.%02d pF\n",
++ atrim / 1000, atrim % 1000); }
++ return 0;
++}
++static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);
++
++static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ int dtrim;
++
++ if (x1205_get_dtrim(to_i2c_client(dev), &dtrim) == 0) {
++ return sprintf(buf, "%d ppm\n", dtrim);
++ }
++ return 0;
++}
++static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
++
++
++static int x1205_attach(struct i2c_adapter *adapter)
++{
++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
++
++ return i2c_probe(adapter, &addr_data, x1205_probe);
++}
++
++static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
++{
++ int err = 0;
++ unsigned char sr;
++ struct i2c_client *client;
++ struct rtc_device *rtc;
++
++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
++ err = -ENODEV;
++ goto exit;
++ }
++
++ if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
++ err = -ENOMEM;
++ goto exit;
++ }
++
++ /* I2C client */
++ client->addr = address;
++ client->driver = &x1205_driver;
++ client->adapter = adapter;
++
++ strlcpy(client->name, x1205_driver.name, I2C_NAME_SIZE);
++
++ /* Verify the chip is really an X1205 */
++ if (kind < 0) {
++ if (x1205_validate_client(client) < 0) {
++ err = -ENODEV;
++ goto exit_kfree;
++ }
++ }
++
++ /* Inform the i2c layer */
++ if ((err = i2c_attach_client(client)))
++ goto exit_kfree;
++
++ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
++
++ rtc = rtc_device_register(x1205_driver.name, &client->dev,
++ &x1205_rtc_ops, THIS_MODULE);
++
++ if (IS_ERR(rtc)) {
++ err = PTR_ERR(rtc);
++ dev_err(&client->dev,
++ "unable to register the class device\n");
++ goto exit_detach;
++ }
++
++ i2c_set_clientdata(client, rtc);
++
++ /* Check for power failures and eventualy enable the osc */
++ if ((err = x1205_get_status(client, &sr)) == 0) {
++ if (sr & X1205_SR_RTCF) {
++ dev_err(&client->dev,
++ "power failure detected, "
++ "please set the clock\n");
++ udelay(50);
++ x1205_fix_osc(client);
++ }
++ }
++ else
++ dev_err(&client->dev, "couldn't read status\n");
++
++ /* If requested, set the system time */
++ if (hctosys) {
++ if ((err = x1205_hctosys(client)) < 0)
++ dev_err(&client->dev,
++ "unable to set the system clock\n");
++ }
++
++ device_create_file(&client->dev, &dev_attr_atrim);
++ device_create_file(&client->dev, &dev_attr_dtrim);
++
++ return 0;
++
++exit_detach:
++ i2c_detach_client(client);
++
++exit_kfree:
++ kfree(client);
++
++exit:
++ return err;
++}
++
++static int x1205_detach(struct i2c_client *client)
++{
++ int err;
++ struct rtc_device *rtc = i2c_get_clientdata(client);
++
++ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
++
++ if (rtc)
++ rtc_device_unregister(rtc);
++
++ if ((err = i2c_detach_client(client)))
++ return err;
++
++ kfree(client);
++
++ return 0;
++}
++
++static int __init x1205_init(void)
++{
++ return i2c_add_driver(&x1205_driver);
++}
++
++static void __exit x1205_exit(void)
++{
++ i2c_del_driver(&x1205_driver);
++}
++
++MODULE_AUTHOR(
++ "Karen Spearel <kas11@tampabay.rr.com>, "
++ "Alessandro Zummo <a.zummo@towertech.it>");
++MODULE_DESCRIPTION("Xicor/Intersil X1205 RTC driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
++
++module_init(x1205_init);
++module_exit(x1205_exit);
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-nslu2/drivers/rtc/rtc-test.c 2006-01-04 01:27:19.000000000 +0100
+@@ -0,0 +1,189 @@
++/*
++ * An RTC test device/driver
++ * Copyright (C) 2005 Tower Technologies
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/err.h>
++#include <linux/rtc.h>
++#include <linux/platform_device.h>
++
++static int test_rtc_read_alarm(struct device *dev,
++ struct rtc_wkalrm *alrm)
++{
++ return 0;
++}
++
++static int test_rtc_set_alarm(struct device *dev,
++ struct rtc_wkalrm *alrm)
++{
++ return 0;
++}
++
++static int test_rtc_read_time(struct device *dev,
++ struct rtc_time *tm)
++{
++ rtc_time_to_tm(get_seconds(), tm);
++ return 0;
++}
++
++static int test_rtc_set_time(struct device *dev,
++ struct rtc_time *tm)
++{
++ return 0;
++}
++
++static int test_rtc_set_mmss(struct device *dev, unsigned long secs)
++{
++ return 0;
++}
++
++static int test_rtc_proc(struct device *dev, struct seq_file *seq)
++{
++ struct platform_device *plat_dev = to_platform_device(dev);
++
++ seq_printf(seq, "24hr\t\t: yes\n");
++ seq_printf(seq, "test\t\t: yes\n");
++ seq_printf(seq, "id\t\t: %d\n", plat_dev->id);
++
++ return 0;
++}
++
++static int test_rtc_ioctl(struct device *dev, unsigned int cmd,
++ unsigned long arg)
++{
++ /* We do support interrupts, they're generated
++ * using the sysfs interface.
++ */
++ switch (cmd) {
++ case RTC_PIE_ON:
++ case RTC_PIE_OFF:
++ case RTC_UIE_ON:
++ case RTC_UIE_OFF:
++ case RTC_AIE_ON:
++ case RTC_AIE_OFF:
++ return 0;
++
++ default:
++ return -EINVAL;
++ }
++}
++
++static struct rtc_class_ops test_rtc_ops = {
++ .proc = test_rtc_proc,
++ .read_time = test_rtc_read_time,
++ .set_time = test_rtc_set_time,
++ .read_alarm = test_rtc_read_alarm,
++ .set_alarm = test_rtc_set_alarm,
++ .set_mmss = test_rtc_set_mmss,
++ .ioctl = test_rtc_ioctl,
++};
++
++static ssize_t test_irq_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%d\n", 42);
++}
++static ssize_t test_irq_store(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ int retval;
++ struct platform_device *plat_dev = to_platform_device(dev);
++ struct rtc_device *rtc = platform_get_drvdata(plat_dev);
++
++ retval = count;
++ if (strncmp(buf, "tick", 4) == 0)
++ rtc_update_irq(&rtc->class_dev, 1, RTC_PF | RTC_IRQF);
++ else if (strncmp(buf, "alarm", 5) == 0)
++ rtc_update_irq(&rtc->class_dev, 1, RTC_AF | RTC_IRQF);
++ else if (strncmp(buf, "update", 6) == 0)
++ rtc_update_irq(&rtc->class_dev, 1, RTC_UF | RTC_IRQF);
++ else
++ retval = -EINVAL;
++
++ return retval;
++}
++static DEVICE_ATTR(irq, S_IRUGO | S_IWUSR, test_irq_show, test_irq_store);
++
++static int test_probe(struct platform_device *plat_dev)
++{
++ int err;
++ struct rtc_device *rtc = rtc_device_register("test", &plat_dev->dev,
++ &test_rtc_ops, THIS_MODULE);
++ if (IS_ERR(rtc)) {
++ err = PTR_ERR(rtc);
++ dev_err(&plat_dev->dev,
++ "unable to register the class device\n");
++ return err;
++ }
++ device_create_file(&plat_dev->dev, &dev_attr_irq);
++
++ platform_set_drvdata(plat_dev, rtc);
++
++ return 0;
++}
++
++static int test_remove(struct platform_device *plat_dev)
++{
++ struct rtc_device *rtc = platform_get_drvdata(plat_dev);
++
++ rtc_device_unregister(rtc);
++ device_remove_file(&plat_dev->dev, &dev_attr_irq);
++
++ return 0;
++}
++
++static void test_release(struct device * dev)
++{
++}
++
++struct platform_device test_dev_zero = {
++ .name = "rtc-test",
++ .id = 0,
++ .dev.release = test_release,
++};
++
++struct platform_device test_dev_one = {
++ .name = "rtc-test",
++ .id = 1,
++ .dev.release = test_release,
++};
++
++struct platform_driver test_drv = {
++ .probe = test_probe,
++ .remove = test_remove,
++ .driver = {
++ .name = "rtc-test",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init test_init(void)
++{
++ platform_device_register(&test_dev_zero);
++ platform_device_register(&test_dev_one);
++ platform_driver_register(&test_drv);
++
++ return 0;
++}
++
++static void __exit test_exit(void)
++{
++ platform_driver_unregister(&test_drv);
++ platform_device_unregister(&test_dev_zero);
++ platform_device_unregister(&test_dev_one);
++}
++
++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
++MODULE_DESCRIPTION("RTC test driver/device");
++MODULE_LICENSE("GPL");
++
++module_init(test_init);
++module_exit(test_exit);
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-nslu2/drivers/rtc/rtc-ds1672.c 2006-01-04 01:27:21.000000000 +0100
+@@ -0,0 +1,266 @@
++/*
++ * An rtc/i2c driver for the Dallas DS1672
++ * Copyright 2005 Alessandro Zummo
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/i2c.h>
++#include <linux/rtc.h>
++
++#define DRV_VERSION "0.1"
++
++/* Addresses to scan: none. This chip cannot be detected. */
++static unsigned short normal_i2c[] = { I2C_CLIENT_END };
++
++/* Insmod parameters */
++I2C_CLIENT_INSMOD;
++I2C_CLIENT_MODULE_PARM(hctosys,
++ "Set the system time from the hardware clock upon initialization");
++
++/* Registers */
++
++#define DS1672_REG_CNT_BASE 0
++#define DS1672_REG_CONTROL 4
++#define DS1672_REG_TRICKLE 5
++
++
++/* Prototypes */
++static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind);
++
++/*
++ * In the routines that deal directly with the ds1672 hardware, we use
++ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
++ * Epoch is initialized as 2000. Time is set to UTC.
++ */
++static int ds1672_get_datetime(struct i2c_client *client, struct rtc_time *tm)
++{
++ unsigned long time;
++ unsigned char buf[4];
++
++ dev_dbg(&client->dev,
++ "%s: raw read data - counters=%02x,%02x,%02x,%02x\n"
++ __FUNCTION__,
++ buf[0], buf[1], buf[2], buf[3]);
++
++ time = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
++
++ rtc_time_to_tm(time, tm);
++
++ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
++ "mday=%d, mon=%d, year=%d, wday=%d\n",
++ __FUNCTION__,
++ tm->tm_sec, tm->tm_min, tm->tm_hour,
++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
++
++ return 0;
++}
++
++static int ds1672_set_mmss(struct i2c_client *client, unsigned long secs)
++{
++ int xfer;
++ unsigned char buf[5];
++
++ buf[0] = DS1672_REG_CNT_BASE;
++ buf[1] = secs & 0x000000FF;
++ buf[2] = (secs & 0x0000FF00) >> 8;
++ buf[3] = (secs & 0x00FF0000) >> 16;
++ buf[4] = (secs & 0xFF000000) >> 24;
++
++ xfer = i2c_master_send(client, buf, 5);
++ if (xfer != 5) {
++ dev_err(&client->dev, "%s: send: %d\n", __FUNCTION__, xfer);
++ return -EIO;
++ }
++
++ return 0;
++}
++
++static int ds1672_set_datetime(struct i2c_client *client, struct rtc_time *tm)
++{
++ unsigned long secs;
++
++ dev_dbg(&client->dev,
++ "%s: secs=%d, mins=%d, hours=%d, ",
++ "mday=%d, mon=%d, year=%d, wday=%d\n",
++ __FUNCTION__,
++ tm->tm_sec, tm->tm_min, tm->tm_hour,
++ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
++
++ rtc_tm_to_time(tm, &secs);
++
++ return ds1672_set_mmss(client, secs);
++}
++
++static int ds1672_hctosys(struct i2c_client *client)
++{
++ int err;
++ struct rtc_time tm;
++ struct timespec tv;
++
++ if ((err = ds1672_get_datetime(client, &tm)) != 0)
++ return err;
++
++ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
++ * whether it stores the most close value or the value with partial
++ * seconds truncated. However, it is important that we use it to store
++ * the truncated value. This is because otherwise it is necessary,
++ * in an rtc sync function, to read both xtime.tv_sec and
++ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
++ * of >32bits is not possible. So storing the most close value would
++ * slow down the sync API. So here we have the truncated value and
++ * the best guess is to add 0.5s.
++ */
++
++ tv.tv_nsec = NSEC_PER_SEC >> 1;
++
++ rtc_tm_to_time(&tm, &tv.tv_sec);
++
++ do_settimeofday(&tv);
++
++ dev_info(&client->dev,
++ "setting the system clock to %d-%02d-%02d %02d:%02d:%02d\n",
++ tm.tm_year + 1900, tm.tm_mon + 1,
++ tm.tm_mday, tm.tm_hour, tm.tm_min,
++ tm.tm_sec);
++
++ return 0;
++}
++
++static int ds1672_rtc_read_time(struct device *dev, struct rtc_time *tm)
++{
++ return ds1672_get_datetime(to_i2c_client(dev), tm);
++}
++
++static int ds1672_rtc_set_time(struct device *dev, struct rtc_time *tm)
++{
++ return ds1672_set_datetime(to_i2c_client(dev), tm);
++}
++
++static int ds1672_rtc_set_mmss(struct device *dev, unsigned long secs)
++{
++ return ds1672_set_mmss(to_i2c_client(dev), secs);
++}
++
++static struct rtc_class_ops ds1672_rtc_ops = {
++ .read_time = ds1672_rtc_read_time,
++ .set_time = ds1672_rtc_set_time,
++ .set_mmss = ds1672_rtc_set_mmss,
++};
++
++static int ds1672_attach(struct i2c_adapter *adapter)
++{
++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
++
++ return i2c_probe(adapter, &addr_data, ds1672_probe);
++}
++
++static int ds1672_detach(struct i2c_client *client)
++{
++ int err;
++ struct rtc_device *rtc = i2c_get_clientdata(client);
++
++ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
++
++ if (rtc)
++ rtc_device_unregister(rtc);
++
++ if ((err = i2c_detach_client(client)))
++ return err;
++
++ kfree(client);
++
++ return 0;
++}
++
++static struct i2c_driver ds1672_driver = {
++ .owner = THIS_MODULE,
++ .name = "ds1672",
++ .flags = I2C_DF_NOTIFY,
++ .attach_adapter = &ds1672_attach,
++ .detach_client = &ds1672_detach,
++};
++
++static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind)
++{
++ int err = 0;
++ struct i2c_client *client;
++ struct rtc_device *rtc;
++
++ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
++ err = -ENODEV;
++ goto exit;
++ }
++
++ if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
++ err = -ENOMEM;
++ goto exit;
++ }
++
++ /* I2C client */
++ client->addr = address;
++ client->driver = &ds1672_driver;
++ client->adapter = adapter;
++
++ strlcpy(client->name, ds1672_driver.name, I2C_NAME_SIZE);
++
++ /* Inform the i2c layer */
++ if ((err = i2c_attach_client(client)))
++ goto exit_kfree;
++
++ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
++
++ rtc = rtc_device_register(ds1672_driver.name, &client->dev,
++ &ds1672_rtc_ops, THIS_MODULE);
++
++ if (IS_ERR(rtc)) {
++ err = PTR_ERR(rtc);
++ dev_err(&client->dev,
++ "unable to register the class device\n");
++ goto exit_detach;
++ }
++
++ i2c_set_clientdata(client, rtc);
++
++ /* If requested, set the system time */
++ if (hctosys) {
++ if ((err = ds1672_hctosys(client)) < 0)
++ dev_err(&client->dev,
++ "unable to set the system clock\n");
++ }
++
++ return 0;
++
++exit_detach:
++ i2c_detach_client(client);
++
++exit_kfree:
++ kfree(client);
++
++exit:
++ return err;
++}
++
++static int __init ds1672_init(void)
++{
++ return i2c_add_driver(&ds1672_driver);
++}
++
++static void __exit ds1672_exit(void)
++{
++ i2c_del_driver(&ds1672_driver);
++}
++
++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
++MODULE_DESCRIPTION("Dallas/Maxim DS1672 timekeeper driver");
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
++
++module_init(ds1672_init);
++module_exit(ds1672_exit);
--- /dev/null
+ drivers/input/misc/Kconfig | 12 +++
+ drivers/input/misc/Makefile | 1
+ drivers/input/misc/nslu2spkr.c | 148 +++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 161 insertions(+)
+
+--- linux-2.6.15/drivers/input/misc/Kconfig 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/input/misc/Kconfig 1970-01-01 00:00:00.000000000 +0000
+@@ -40,6 +40,18 @@ config INPUT_M68K_BEEP
+ tristate "M68k Beeper support"
+ depends on M68K
+
++config INPUT_NSLU2_BEEPER
++ tristate "NSLU2 Beeper support"
++ depends on MACH_NSLU2
++ help
++ Say Y here if you want the embedded beeper on the LinkSys NSLU2
++ to be used for bells and whistles.
++
++ If unsure, say Y.
++
++ To compile this driver as a module, choose M here: the
++ module will be called nslu2spkr.
++
+ config INPUT_UINPUT
+ tristate "User level driver support"
+ help
+--- linux-2.6.15/drivers/input/misc/Makefile 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/input/misc/Makefile 1970-01-01 00:00:00.000000000 +0000
+@@ -10,3 +10,4 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68ksp
+ obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o
+ obj-$(CONFIG_INPUT_UINPUT) += uinput.o
+ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
++obj-$(CONFIG_INPUT_NSLU2_BEEPER) += nslu2spkr.o
+--- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,148 @@
++/*
++ * drivers/input/misc/nslu2spkr.c
++ *
++ * NSLU2 Beeper driver
++ *
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * based on nslu2-io.c
++ * Copyright (C) 2004 Karen Spearel
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/delay.h>
++
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++
++static unsigned int beep_on_startup = 1;
++module_param(beep_on_startup, bool, 0);
++MODULE_PARM_DESC(beep_on_startup, "Play a beep on module startup");
++
++DEFINE_SPINLOCK(beep_lock);
++
++static int nslu2_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
++{
++ unsigned int count = 0;
++ unsigned long flags;
++
++ if (type != EV_SND)
++ return -1;
++
++ switch (code) {
++ case SND_BELL:
++ if (value) value = 1000;
++ case SND_TONE:
++ break;
++ default:
++ return -1;
++ }
++
++ if (value > 20 && value < 32767)
++ count = (NSLU2_FREQ / (value*4)) - 1;
++
++ spin_lock_irqsave(&beep_lock, flags);
++
++ if (count) {
++
++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_OUT);
++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_LOW);
++
++ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
++
++ } else {
++
++ gpio_line_config(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_IN);
++ gpio_line_set(NSLU2_GPIO_BUZZ, IXP4XX_GPIO_HIGH);
++
++ *IXP4XX_OSRT2 = 0;
++ }
++
++ spin_unlock_irqrestore(&beep_lock, flags);
++
++ return 0;
++}
++
++static struct input_dev nslu2_spkr_dev = {
++ .phys = "ixp420/gpio4",
++ .name = "NSLU2 Beeper",
++ .evbit[0] = BIT(EV_SND),
++ .sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE),
++ .event = nslu2_spkr_event,
++ .id = {
++ .bustype = BUS_HOST,
++ .vendor = 0x001f,
++ .product = 0x0001,
++ .version = 0x0100
++ }
++};
++
++static irqreturn_t nslu2_spkr_handler(int irq, void *dev_id, struct pt_regs *regs)
++{
++ /* clear interrupt */
++ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
++
++ /* flip the beeper output */
++ *IXP4XX_GPIO_GPOUTR ^= NSLU2_BZ_BM;
++
++ return IRQ_HANDLED;
++}
++
++static int __init nslu2_spkr_init(void)
++{
++ if (!(machine_is_nslu2()))
++ return -ENODEV;
++
++ if (request_irq(IRQ_IXP4XX_TIMER2, &nslu2_spkr_handler,
++ SA_INTERRUPT | SA_TIMER, "nslu2-beeper", NULL < 0)) {
++
++ printk(KERN_INFO "NSLU2 beeper: IRQ %d not available\n",
++ IRQ_IXP4XX_TIMER2);
++
++ return -EIO;
++ }
++
++ input_register_device(&nslu2_spkr_dev);
++
++ /* do a little beep to tell the world we are alive */
++ if (beep_on_startup)
++ {
++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 440);
++ msleep(120);
++ nslu2_spkr_event(NULL, EV_SND, SND_TONE, 0);
++ }
++
++ printk(KERN_INFO "NSLU2: beeper\n");
++ return 0;
++}
++
++static void __exit nslu2_spkr_exit(void)
++{
++ input_unregister_device(&nslu2_spkr_dev);
++
++ disable_irq(IRQ_IXP4XX_TIMER2);
++
++ /* turn it off */
++ nslu2_spkr_event(NULL, EV_SND, SND_BELL, 0);
++
++ free_irq(IRQ_IXP4XX_TIMER2, NULL);
++}
++
++module_init(nslu2_spkr_init);
++module_exit(nslu2_spkr_exit);
++
++MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
++MODULE_DESCRIPTION("NSLU2 Beeper driver");
++MODULE_LICENSE("GPL");
--- /dev/null
+ arch/arm/Kconfig | 8 -
+ arch/arm/mach-ixp4xx/Makefile | 4
+ arch/arm/mach-ixp4xx/nslu2-leds.c | 223 ++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 232 insertions(+), 3 deletions(-)
+
+--- linux-2.6.15/arch/arm/Kconfig 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/arch/arm/Kconfig 1970-01-01 00:00:00.000000000 +0000
+@@ -418,7 +418,8 @@ config LEDS
+ ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
+ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
+- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
++ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
++ MACH_NSLU2
+ help
+ If you say Y here, the LEDs on your machine will be used
+ to provide useful information about your current system status.
+@@ -432,7 +433,7 @@ config LEDS
+
+ config LEDS_TIMER
+ bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
+- MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
++ MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 || MACH_NSLU2
+ depends on LEDS
+ default y if ARCH_EBSA110
+ help
+@@ -448,7 +449,8 @@ config LEDS_TIMER
+
+ config LEDS_CPU
+ bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
+- !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2
++ !ARCH_OMAP) || MACH_OMAP_H2 || MACH_OMAP_PERSEUS2 \
++ || MACH_NSLU2
+ depends on LEDS
+ help
+ If you say Y here, the red LED will be used to give a good real
+--- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
+@@ -10,3 +10,7 @@ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
+ obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
+
++leds-$(CONFIG_MACH_NSLU2) += nslu2-leds.o
++obj-$(CONFIG_LEDS) += $(leds-y)
++
++
+--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-leds.c 1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,223 @@
++/*
++ * arch/arm/mach-ixp4xx/nslu2-leds.c
++ *
++ * NSLU2 LEDs driver
++ *
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * based on nslu2-io.c
++ * Copyright (C) 2004 Karen Spearel
++ * and arch/arm/mach-footbridge/netwinder-leds.c
++ * Copyright (C) 1998-1999 Russell King
++ *
++ * Author: Alessandro Zummo <a.zummo@towertech.it>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/spinlock.h>
++#include <linux/notifier.h>
++
++#include <asm/hardware.h>
++#include <asm/leds.h>
++#include <asm/mach-types.h>
++#include <asm/system.h>
++
++#define LED_STATE_ENABLED 0x01
++#define LED_STATE_CLAIMED 0x02
++#define LED_STATE_IDLE 0x04
++
++static unsigned char led_state;
++static unsigned int hw_led_state;
++
++#ifdef CONFIG_LEDS_TIMER
++static const unsigned long idle_seq[4] = {
++ NSLU2_LED_GRN_BM, 0,
++ NSLU2_LED_GRN_BM, 0,
++};
++
++static const unsigned long busy_seq[4] = {
++ NSLU2_LED_GRN_BM, 0,
++ NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM, 0,
++};
++#endif
++
++static unsigned char led_count = 0;
++
++static DEFINE_SPINLOCK(leds_lock);
++extern spinlock_t gpio_lock;
++
++static void nslu2_leds_event(led_event_t evt)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&leds_lock, flags);
++
++ switch (evt) {
++ case led_start:
++ /* Let's rock! Red led on, all others off. Remember
++ * that disk1/disk2 works inverted.
++ */
++ led_state = LED_STATE_ENABLED;
++ hw_led_state = NSLU2_LED_DISK1_BM | NSLU2_LED_DISK2_BM
++ | NSLU2_LED_RED_BM;
++ break;
++
++ case led_stop:
++ led_state &= ~LED_STATE_ENABLED;
++ break;
++
++ case led_claim:
++ /* The user claimed the interface, red and green off */
++ led_state |= LED_STATE_CLAIMED;
++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++ break;
++
++ case led_release:
++ /* The user released the interface, preserve the last
++ * status of the leds, except red/green.
++ */
++ led_state &= ~LED_STATE_CLAIMED;
++ hw_led_state = *IXP4XX_GPIO_GPOUTR & 0x0000000C;
++ break;
++
++#ifdef CONFIG_LEDS_TIMER
++ case led_timer:
++ /* Pulse green led */
++ if (!(led_state & LED_STATE_CLAIMED))
++ {
++ /* clear red and green bits */
++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++
++ /* copy the right sequence in */
++ if (led_state & LED_STATE_IDLE)
++ hw_led_state |= idle_seq[led_count % 4];
++ else
++ hw_led_state |= busy_seq[led_count % 4];
++
++ led_count++;
++ }
++ break;
++#endif
++
++#ifdef CONFIG_LEDS_CPU
++ case led_idle_start:
++ led_state |= LED_STATE_IDLE;
++#ifndef CONFIG_LEDS_TIMER
++ /* green on, red off */
++ hw_led_state |= NSLU2_LED_GRN_BM;
++ hw_led_state &= ~NSLU2_LED_RED_BM;
++#endif
++ break;
++
++ case led_idle_end:
++ led_state &= ~LED_STATE_IDLE;
++#ifndef CONFIG_LEDS_TIMER
++ /* green on, red on -> amber on */
++ hw_led_state |= NSLU2_LED_GRN_BM | NSLU2_LED_RED_BM;
++#endif
++ break;
++#endif /* CONFIG_LEDS_CPU */
++
++ case led_halted:
++ if (!(led_state & LED_STATE_CLAIMED))
++ hw_led_state |= NSLU2_LED_RED_BM;
++ break;
++
++ /* leds */
++
++ case led_green_on:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state |= NSLU2_LED_GRN_BM;
++ break;
++
++ case led_green_off:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state &= ~NSLU2_LED_GRN_BM;
++ break;
++
++ case led_amber_on:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state |= (NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++ break;
++
++ case led_amber_off:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state &= ~(NSLU2_LED_RED_BM | NSLU2_LED_GRN_BM);
++ break;
++
++ case led_red_on:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state |= NSLU2_LED_RED_BM;
++ break;
++
++ case led_red_off:
++ if (led_state & LED_STATE_CLAIMED)
++ hw_led_state &= ~NSLU2_LED_RED_BM;
++ break;
++
++ default:
++ break;
++ }
++
++ spin_unlock_irqrestore(&leds_lock, flags);
++
++ if (led_state & LED_STATE_ENABLED) {
++ spin_lock_irqsave(&gpio_lock, flags);
++ *IXP4XX_GPIO_GPOUTR = (*IXP4XX_GPIO_GPOUTR & 0xFFFFFFF0) | hw_led_state;
++ spin_unlock_irqrestore(&gpio_lock, flags);
++ }
++}
++
++static int nslu2_leds_panic_event(struct notifier_block *this, unsigned long event,
++ void *ptr)
++{
++#ifdef CONFIG_LEDS_TIMER
++ leds_event(led_claim);
++#endif
++ leds_event(led_green_off);
++ leds_event(led_red_on);
++
++ return NOTIFY_DONE;
++}
++
++static struct notifier_block nslu2_leds_panic_block = {
++ .notifier_call = nslu2_leds_panic_event,
++};
++
++static int __init nslu2_leds_init(void)
++{
++ if (!(machine_is_nslu2()))
++ return 0;
++
++ printk(KERN_INFO "NSLU2: leds\n");
++
++ /* register panic notifier */
++ notifier_chain_register(&panic_notifier_list, &nslu2_leds_panic_block);
++
++ /* enable gpio 0-3 */
++ gpio_line_config(NSLU2_LED_GRN, IXP4XX_GPIO_OUT);
++ gpio_line_config(NSLU2_LED_RED, IXP4XX_GPIO_OUT);
++ gpio_line_config(NSLU2_LED_DISK1, IXP4XX_GPIO_OUT);
++ gpio_line_config(NSLU2_LED_DISK2, IXP4XX_GPIO_OUT);
++
++ leds_event = nslu2_leds_event;
++
++ /* this will also initialize the leds to the
++ * default state.
++ */
++
++ leds_event(led_start);
++
++ return 0;
++}
++
++module_init(nslu2_leds_init);
--- /dev/null
+--- linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/arch/arm/mach-ixp4xx/Makefile 1970-01-01 00:00:00.000000000 +0000
+@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc
+ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
+ obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
+ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
+-obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
++obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-io.o
+
+--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-io.c 1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,548 @@
++//=============================================================================
++//
++// n2-io.c version 0.1.7
++// Author: Karen Spearel <kas11 at tampabay.rr.com>
++// please report problems/bugs directly to the address above
++//
++// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per
++// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk
++//
++// NOTE: THIS IS INCOMPLETE. INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD,
++// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff. EVENTUALLY IT
++// WILL TALK TO THE n2_pbd DAEMON. EVENTUALLY THE LED DRIVER
++// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS.
++//
++//=============================================================================
++// GPIO Function State
++// 0 Red LED Status
++// 1 Green LED Ready = 1
++// 2 Disk 2 LED On = 0
++// 3 Disk 1 LED On = 0
++// 4 Buzzer
++// 5 Power Button Pressed = 1
++// 8 Power Down Output = 1 powers down NSLU2
++// 12 Reset Pressed = 0
++
++#include <linux/config.h>
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/proc_fs.h>
++#include <linux/device.h>
++#include <linux/reboot.h>
++
++#include <asm/uaccess.h>
++#include <asm-arm/irq.h>
++#include <asm-arm/delay.h>
++
++/* Set this to 1 to output lots of debug messages. */
++#define NSLU2_IO_DEBUG 0
++
++#if NSLU2_IO_DEBUG
++#define nslu2_io_debug(args) printk args
++#else
++#define nslu2_io_debug(args) ((void)0)
++#endif
++
++#define VERSION "0.1.7"
++
++#define NSLU2BZ_MAJOR 62 //buzzer
++#define NSLU2LM_MAJOR 126
++
++
++#define NSLU2_BEEP_DUR_LONG 2000
++#define NSLU2_BEEP_DUR_MED 400
++#define NSLU2_BEEP_DUR_SHORT 100
++#define NSLU2_BEEP_PITCH_HIGH 250
++#define NSLU2_BEEP_PITCH_MED 500
++#define NSLU2_BEEP_PITCH_LOW 1000
++#define NSLU2_LONG_DELAY 30000
++
++#define NSLU2_BZ_BM (1L << NSLU2_GPIO_BUZZ)
++
++// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe
++
++#define NSLU2BZ_BEEP_STOP _IO('M',0) //stop multi-beep at end of audible
++#define NSLU2BZ_BEEP _IO('M',1) //one beep at current defaults
++#define NSLU2BZ_BEEPS _IOW('M',3,long) //param beeps at current defaults
++#define NSLU2BZ_TONESET _IOW('M',4,long) //set tone: range is high=250 to low=2000
++#define NSLU2BZ_ONTIME _IOW('M',5,long) //ontime for multi-beeps in jiffies
++#define NSLU2BZ_SILENTTIME _IOW('M',6,long) //offtime for multi-beeps in jiffies
++#define NSLU2BZ_REPEATCNT _IOW('M',7,long) //number of repeats for multi-beeps 0 = forever
++#define NSLU2BZ_COMBINED _IOW('M',8,long) //combine all params in a long
++
++#define NSLU2LM_OFF _IOW('M',32,long)
++#define NSLU2LM_ON _IOW('M',33,long)
++#define NSLU2LM_BLINK _IOW('M',34,long)
++#define NSLU2LM_ALT _IOW('M',35,long)
++#define NSLU2LM_ALL_ON _IO('M',36)
++#define NSLU2LM_ALL_OFF _IO('M',37)
++
++#define PHYS_LEDS 4
++#define BLINK_DELAY 25
++
++// OR Masks to turn these LEDs ON
++
++#define RS_RED_ON 0x00000001 //0b0000 0000 0000 0010
++#define RS_GRN_ON 0x00000002 //0b0000 0000 0000 0001
++#define RS_YEL_ON 0x00000003 //0b0000 0000 0000 0011
++
++// AND Masks to turn these LEDs OFF
++
++#define RS_RED_OFF 0xfffffffe //0b1111 1111 1111 1101
++#define RS_GRN_OFF 0xfffffffd //0b1111 1111 1111 1110
++#define RS_YEL_OFF 0xfffffffc //0b1111 1111 1111 1100
++
++// AND Masks to turn these LEDs ON
++
++#define DISK1_ON 0xfffffff7 //0b1111 1111 1111 0111
++#define DISK2_ON 0xfffffffb //0b1111 1111 1111 1011
++
++// Or Masks to turn these LEDs OFF
++
++#define DISK1_OFF 0x00000008 //0b0000 0000 0000 1000
++#define DISK2_OFF 0x00000004 //0b0000 0000 0000 0100
++
++// EOR masks for toggling LEDs on/off
++
++#define RS_RG_ALT 0x00000003 //eor mask to toggle rs rg bits
++#define RS_GRN_TGL 0x00000002
++#define RS_RED_TGL 0x00000001
++#define DISK1_TGL 0x00000008
++#define DISK2_TGL 0x00000004
++
++// The LED names for switches
++
++#define LED_RS_RED 0
++#define LED_RS_GRN 1
++#define LED_DISK1 2
++#define LED_DISK2 3
++#define LED_ALL 4
++
++static unsigned long ontime = 50;
++static unsigned long offtime = 450;
++static unsigned long bz_repeatcnt = 10;
++static unsigned long tone = 1000;
++
++static struct timer_list n2lm_rsg_timer; //rs green
++static struct timer_list n2lm_rsr_timer; //rs red
++static struct timer_list n2lm_d1_timer; //drive 1
++static struct timer_list n2lm_d2_timer; //drive 2
++static struct timer_list n2bz_timer; //beeper
++
++// sysfs class
++static struct class *n2lm_class;
++
++//==================================================================================================
++//
++// Blinking is handled entirely by the 4 timer handlers. On timeout, the bit in the
++// GPIO output register is xor'd with a mask corresponding to the selected led which simply
++// flips that bit. No record of what any of the other leds is doing is needed.
++//
++//==================================================================================================
++// this blinks rs green or green/yellow if rs red is on
++#ifndef CONFIG_LEDS
++static void n2lm_rsg_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL; //flip the led
++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY; //next timeout
++ add_timer(&n2lm_rsg_timer); //reinit timer
++ return;
++}
++
++// this blinks or alternates rs red green... inited wit green on/red off
++static void n2lm_rsr_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data;
++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_rsr_timer);
++ return;
++}
++// blinks disk 1
++static void n2lm_d1_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= DISK1_TGL;
++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d1_timer);
++ return;
++}
++// blinks disk 2
++static void n2lm_d2_handler(unsigned long data)
++{
++ *IXP4XX_GPIO_GPOUTR ^= DISK2_TGL;
++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d2_timer);
++ return;
++}
++
++//==================================================================================================
++
++static void n2lm_timer_start(unsigned long led)
++{
++
++ nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led));
++
++ switch(led) {
++ case LED_RS_RED:
++ n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_rsr_timer);
++ break;
++
++ case LED_RS_GRN:
++ n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_rsg_timer);
++ break;
++
++ case LED_DISK1:
++ n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d1_timer);
++ break;
++
++ case LED_DISK2:
++ n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
++ add_timer(&n2lm_d2_timer);
++ break;
++
++ default:
++ break;
++ }
++ return;
++}
++
++//==================================================================================================
++
++static void n2lm_timer_stop(unsigned long led)
++{
++ switch (led) {
++ case LED_RS_RED:
++ del_timer(&n2lm_rsr_timer);
++ break;
++ case LED_RS_GRN:
++ del_timer(&n2lm_rsg_timer);
++ break;
++ case LED_DISK1:
++ del_timer(&n2lm_d1_timer);
++ break;
++ case LED_DISK2:
++ del_timer(&n2lm_d2_timer);
++ break;
++ default:
++ break;
++ }
++ return;
++}
++
++//--------------------------------------------------------------------------------------------------
++
++static void n2lm_timer_stop_all(void)
++{
++ del_timer(&n2lm_rsg_timer);
++ del_timer(&n2lm_rsr_timer);
++ del_timer(&n2lm_d1_timer);
++ del_timer(&n2lm_d2_timer);
++ return;
++}
++//--------------------------------------------------------------------------------------------------
++
++static void n2lm_ledon(unsigned long led)
++{
++
++ nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led));
++
++ switch (led) {
++ case LED_RS_RED:
++ *IXP4XX_GPIO_GPOUTR |= RS_RED_ON; //1
++ return;
++ case LED_RS_GRN:
++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON; //2
++ return;
++ case LED_DISK1:
++ *IXP4XX_GPIO_GPOUTR &= DISK1_ON; //0xfffffff7
++ return;
++ case LED_DISK2:
++ *IXP4XX_GPIO_GPOUTR &= DISK2_ON; //0xfffffffb
++ return;
++ case LED_ALL: //all green
++ *IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;
++ *IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON);
++ return;
++ }
++}
++
++//--------------------------------------------------------------------------------------------------
++
++static void n2lm_ledoff(unsigned long led)
++{
++
++ switch (led) {
++ case LED_RS_RED:
++ *IXP4XX_GPIO_GPOUTR &= RS_RED_OFF; //0xffffffffe
++ return;
++ case LED_RS_GRN:
++ *IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF; //0xfffffffd
++ return;
++ case LED_DISK1:
++ *IXP4XX_GPIO_GPOUTR |= DISK1_OFF; //0x00000008
++ return;
++ case LED_DISK2:
++ *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; //0x00000004
++ return;
++ case LED_ALL:
++ *IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF);
++ *IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF);
++ }
++}
++
++//==================================================================================================
++
++static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led)
++{
++
++ nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led));
++
++ if (led < 0 || led >= PHYS_LEDS)
++ return -EINVAL;
++
++ switch (cmd ) {
++ case NSLU2LM_ON:
++ n2lm_timer_stop(led);
++ n2lm_ledon(led);
++ break;
++
++ case NSLU2LM_OFF:
++ n2lm_timer_stop(led);
++ n2lm_ledoff(led);
++ break;
++
++ case NSLU2LM_BLINK:
++ n2lm_ledon(led);
++ if (led == LED_RS_RED)
++ n2lm_rsr_timer.data = RS_RED_TGL;
++ n2lm_timer_start(led);
++ break;
++
++ case NSLU2LM_ALT:
++ if (led == LED_RS_RED)
++ {
++ n2lm_ledon(LED_RS_GRN);
++ n2lm_ledoff(LED_RS_RED);
++ n2lm_rsr_timer.data = RS_RG_ALT;
++ n2lm_timer_start(LED_RS_RED);
++ break;
++ } else
++ return -EINVAL;
++
++ case NSLU2LM_ALL_ON:
++ n2lm_timer_stop_all();
++ n2lm_ledon(LED_ALL);
++ break;
++
++ case NSLU2LM_ALL_OFF:
++ n2lm_timer_stop_all();
++ n2lm_ledoff(LED_ALL);
++ break;
++
++ default:
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static struct file_operations n2lm_fops = {
++ .owner = THIS_MODULE,
++ .ioctl = n2lm_ioctl,
++};
++#endif
++//==================================================================================================
++// We can't do anything fancy here since the system tick rate is far below that required to
++// generate a desirable tone. Therefore we haven't much choice but to use a busy loop until
++// I get up to speed on the timers. The saving grace is that for the normal uses, nothing
++// important should be haprepening.
++//==================================================================================================
++
++static void n2_buzz(int tone_delay, int duration)
++{
++ int i;
++
++ *IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
++
++ for (i = 1; i < duration; i++) {
++ *IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
++ udelay(tone_delay);
++ *IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
++ udelay(tone_delay);
++ }
++ *IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
++
++ return;
++}
++//=================================================================================================
++
++// this handles the buzzer duty cycle
++static void n2bz_handler(unsigned long data)
++{
++ if (--bz_repeatcnt > 0) { //if just one beep left to do
++ n2bz_timer.expires = jiffies + ontime + offtime; //next timeout
++ add_timer(&n2bz_timer); //reinit timer
++ }
++ n2_buzz(tone/2, ontime);
++ nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime));
++ return;
++}
++
++//==================================================================================================
++
++static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param)
++{
++ switch (cmd) {
++ case NSLU2BZ_BEEP:
++ n2_buzz(tone/2, ontime);
++ break;
++
++ case NSLU2BZ_BEEP_STOP:
++ del_timer(&n2bz_timer);
++ break;
++
++ case NSLU2BZ_BEEPS:
++ if (param == 0)
++ bz_repeatcnt = 0xffffffff;
++ else
++ bz_repeatcnt = param;
++ n2bz_handler(0);
++ break;
++
++ case NSLU2BZ_TONESET:
++ if (param >= 250 && param <= 2000)
++ tone = param;
++ break;
++
++ case NSLU2BZ_ONTIME:
++ if (param > 4 && param < 201)
++ ontime = param;
++ break;
++
++ case NSLU2BZ_SILENTTIME:
++ if (param > ontime) //enforce a reasonable duty cycle
++ offtime = param;
++ else
++ offtime = ontime;
++ break;
++
++ case NSLU2BZ_REPEATCNT:
++ if (param == 0)
++ bz_repeatcnt = 0xffffffff;
++ else
++ bz_repeatcnt = param;
++ break;
++
++ case NSLU2BZ_COMBINED:
++ bz_repeatcnt = (param & 0xF0000000) >> 28; //repeat 1 - 16
++ ontime = (param & 0x0FF00000) >> 20; //ontime 1 - 256 jiffies
++ offtime = (param & 0x000FFF00) >> 8; //offtime 1 - 4095 jiffies
++ tone = (param & 0x000000FF) << 4; //tone (1 - 255) * 16
++ break;
++
++ default:
++ break;
++ }
++ return 0;
++}
++
++static struct file_operations n2bz_fops = {
++ .owner = THIS_MODULE,
++ .ioctl = n2bz_ioctl,
++};
++
++static void n2iom_initarch(void)
++{
++#ifndef CONFIG_LEDS
++ init_timer(&n2lm_rsg_timer);
++ init_timer(&n2lm_rsr_timer);
++ init_timer(&n2lm_d1_timer);
++ init_timer(&n2lm_d2_timer);
++
++ n2lm_rsr_timer.function = n2lm_rsr_handler;
++ n2lm_rsg_timer.function = n2lm_rsg_handler;
++ n2lm_d2_timer.function = n2lm_d2_handler;
++ n2lm_d1_timer.function = n2lm_d1_handler;
++#endif
++
++ init_timer(&n2bz_timer);
++ n2bz_timer.function = n2bz_handler;
++
++ n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0;
++
++#ifndef CONFIG_LEDS
++ *IXP4XX_GPIO_GPOER &= 0xfffffff0; //enable gpio 0-3
++ *IXP4XX_GPIO_GPOUTR |= 0x00000003; //turn off the leds
++ *IXP4XX_GPIO_GPOUTR &= 0xfffffffc;
++ n2lm_ledon(LED_ALL);
++ n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT);
++ n2lm_ledoff(LED_ALL);
++
++ // Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit
++ n2lm_ledon(LED_RS_RED);
++#endif
++
++ return;
++}
++
++//==================================================================================================
++
++static int __init n2iom_init(void)
++{
++ printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
++
++ n2iom_initarch();
++
++ n2lm_class = class_create(THIS_MODULE, "nslu2");
++
++#ifndef CONFIG_LEDS
++ if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) {
++ printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR);
++ return -EBUSY;
++ }
++ else {
++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
++ }
++#endif
++
++ if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) {
++ printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR);
++ return -EBUSY;
++ }
++ else {
++ class_device_create(n2lm_class, NULL, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
++ }
++
++ return 0;
++}
++
++//==================================================================================================
++
++static void __exit n2iom_exit(void)
++{
++
++#ifndef CONFIG_LEDS
++ del_timer(&n2lm_rsg_timer);
++ del_timer(&n2lm_rsr_timer);
++ del_timer(&n2lm_d1_timer);
++ del_timer(&n2lm_d2_timer);
++
++ unregister_chrdev(NSLU2LM_MAJOR, "n2lm" );
++ class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0));
++#endif
++
++ unregister_chrdev(NSLU2BZ_MAJOR, "n2bz");
++ class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0));
++
++ class_destroy(n2lm_class);
++}
++
++module_init(n2iom_init);
++module_exit(n2iom_exit);
++
++MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>");
++MODULE_DESCRIPTION("NSLU2 I/O driver");
++MODULE_LICENSE("GPL");
--- /dev/null
+--- linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
+@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void)
+ * IXP4xx timer tick
+ * We use OS timer1 on the CPU for the timer tick and the timestamp
+ * counter as a source of real clock ticks to account for missed jiffies.
++ *
++ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second,
++ * this is significantly greater than the actual number on any ixp4xx
++ * board. Neither this nor 'LATCH' are required by this code because
++ * the only requirement is to generate HZ timer_tick calls per second.
+ *************************************************************************/
++#if TICK_NSEC * HZ != 1000000000
++ /* This will cause the jiffies to drift unnecessarily. */
++# error CLOCK_TICK_RATE should be a multiple of HZ for this code
++#endif
++
++/* These are the control registers for the interrupt handler, they must
++ * only be read and written by the interrupt handler and by the init
++ * method (which sets them to 0).
++ */
++static volatile u32 last_timer_time;
++static volatile int accumulated_error;
++
++/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset
++ * this from the board level code if required. The following variables
++ * must be *written* only by set_board_tick_rate
++ */
++static u32 board_tick_rate;
++static u32 board_tick_per_1000; /* board_tick_rate/1000 */
++static u32 timer_count;
++
++/* The following symbol may be written to change the current tick rate,
++ * it is read by the interrupt handler and used to reload the timer.
++ * The 'real' value (the one in use) is 'board_tick_rate' above.
++ * NOTE: this can be tweaked to match the actual crystal on a particular
++ * machine.
++ */
++volatile u32 ixp4xx_board_tick_rate = 66666600;
++EXPORT_SYMBOL(ixp4xx_board_tick_rate);
++
++/* The set API may run asynchronously in the presence of interrupts,
++ * everything it does it is both atomic and complete (notice that it
++ * doesn't change any of the 'volatile' values). The mathematics in
++ * here require the following values. Changing the board tick rate
++ * implies an unknown error in the current timestamp tick count.
++ */
++#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1
++# error unexpected value for timer reload mask
++#endif
++static void set_board_tick_rate(u32 rate) {
++ u32 reload;
++
++ /* Store the two effectively informational rate values, the
++ * error calculation is (rate - count*HZ) (above), and rate
++ * is changed first, this can cause a temporary error which
++ * will be corrected on the next interrupt.
++ */
++ board_tick_rate = rate;
++ board_tick_per_1000 = (rate+500)/1000;
++
++ /* Calculate the correct value to load into the timer countdown
++ * register, the low two bits must be b01 (to enable the timer).
++ * Select the top bits to be as close to the desired value as
++ * possible.
++ *
++ * First find the best value, regardless of the low two bits -
++ * this is the value used in the interrupt calculation even though
++ * it cannot necessarily be set into the register.
++ */
++ timer_count = (rate + (HZ/2))/HZ;
++
++ /* Now the timer_ticks are being generated at this rate, calculate
++ * an appropriate value for the register. This stores a 30 bit
++ * value which gives a period of 4*x+1, we want:
++ *
++ * 4*x+1 = board_tick_rate/HZ
++ *
++ * This needs to be rounded to the closest 4*HZ value:
++ *
++ * x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ
++ * x = (board_tick_rate+HZ) / (4*HZ);
++ */
++ reload = (board_tick_rate + HZ) / HZ;
++ reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
++ *IXP4XX_OSRT1 = reload;
+
+-static unsigned volatile last_jiffy_time;
++ /* If the clock is drifing, look in syslog: */
++ printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload);
++}
+
+-#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
++/* This returns the time in timer ticks since the 'last_timer_time'
++ * recorded above. Use this to avoid arithmetic errors because of
++ * the overflow when the timer wraps.
++ */
++static inline u32 ixp4xx_timer_delta(void)
++{
++ return *IXP4XX_OSTS - last_timer_time;
++}
+
+ /* IRQs are disabled before entering here from do_gettimeofday() */
+ static unsigned long ixp4xx_gettimeoffset(void)
+ {
+- u32 elapsed;
+-
+- elapsed = *IXP4XX_OSTS - last_jiffy_time;
++ /* Return the offset of the current time from the last time
++ * timer tick in microseconds. This is only used for the
++ * gettimeofday call.
++ *
++ * The result of this API is at most about 20000 (for a 50Hz
++ * HZ - 20000 uS/tick), the input delta is at most about
++ * 1.3M - 21 bits.
++ */
++ u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */
++ /* return delta * 1000000 / board_tick_rate; */
++ return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000;
++}
+
+- return elapsed / CLOCK_TICKS_PER_USEC;
++/* This is the correct adjustment to the counter to compensate for an
++ * error iff timer_count-1 <= exact_count <= timer_count+1
++ */
++static inline int adjustment(int error) {
++ if (error >= HZ)
++ return 1;
++ else if (error <= -HZ)
++ return -1;
++ return 0;
+ }
+
+ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+ {
++ u32 rate;
++ u32 count;
++ int error;
++
+ write_seqlock(&xtime_lock);
+
+ /* Clear Pending Interrupt by writing '1' to it */
+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
+
++ /* If the board tick rate has been changed update the cached
++ * value.
++ */
++ if (ixp4xx_board_tick_rate != board_tick_rate) {
++ set_board_tick_rate(ixp4xx_board_tick_rate);
++ accumulated_error = 0;
++ }
++
+ /*
+ * Catch up with the real idea of time
++ *
++ * board_tick_rate: actual ixp4xx ticks/second, read-only
++ * accumulated_error: aggregate error/tick * HZ, read/write
++ * timer_count: best ixp4xx ticks per timer_tick, read-only
+ */
+- while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
++ rate = board_tick_rate;
++ error = accumulated_error;
++ count = timer_count;
++ do {
++ u32 adjusted_count = count + adjustment(error);
++ if (ixp4xx_timer_delta() < adjusted_count)
++ break;
+ timer_tick(regs);
+- last_jiffy_time += LATCH;
+- }
++ last_timer_time += adjusted_count;
++ error += rate - adjusted_count*HZ;
++ } while (1);
++ accumulated_error = error;
+
+ write_sequnlock(&xtime_lock);
+
+@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq
+ .handler = ixp4xx_timer_interrupt,
+ };
+
++u32 ixp4xx_get_board_tick_rate(void) {
++ return board_tick_rate;
++}
++
++EXPORT_SYMBOL(ixp4xx_get_board_tick_rate);
++
++void ixp4xx_set_board_tick_rate(u32 rate) {
++ ixp4xx_board_tick_rate = rate;
++}
++
++EXPORT_SYMBOL(ixp4xx_set_board_tick_rate);
++
+ static void __init ixp4xx_timer_init(void)
+ {
+ /* Clear Pending Interrupt by writing '1' to it */
+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
+
+ /* Setup the Timer counter value */
+- *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
++ set_board_tick_rate(ixp4xx_board_tick_rate);
+
+ /* Reset time-stamp counter */
+ *IXP4XX_OSTS = 0;
+- last_jiffy_time = 0;
++ last_timer_time = 0;
++ accumulated_error = 0;
+
+ /* Connect the interrupt handler and enable the interrupt */
+ setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
+@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void)
+ ARRAY_SIZE(ixp46x_devices));
+ }
+ }
+-
+--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
+@@ -119,6 +119,11 @@ static void nslu2_power_off(void)
+
+ static void __init nslu2_init(void)
+ {
++ /* The NSLU2 has a 33MHz crystal on board - 1.01% different
++ * from the typical value.
++ */
++ ixp4xx_set_board_tick_rate(66000000);
++
+ ixp4xx_sys_init();
+
+ pm_power_off = nslu2_power_off;
+--- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
+@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input
+ }
+
+ if (value > 20 && value < 32767)
+- count = (NSLU2_FREQ / (value*4)) - 1;
++ count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1;
+
+ spin_lock_irqsave(&beep_lock, flags);
+
+--- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
+@@ -38,11 +38,6 @@
+ #define NSLU2_PCI_INTD_PIN 8
+
+
+-/* NSLU2 Timer */
+-#define NSLU2_FREQ 66000000
+-#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+-#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
+-
+ /* GPIO */
+
+ #define NSLU2_GPIO0 0
+--- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
+@@ -6,10 +6,23 @@
+ #include <asm/hardware.h>
+
+ /*
+- * We use IXP425 General purpose timer for our timer needs, it runs at
+- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
+- * timer register ignores the bottom 2 bits of the LATCH value.
++ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and
++ * is the number of internal counts per timer interrupt. Thus
++ * CLOCK_TICK_RATE is LATCH*HZ.
++ *
++ * The actual values of these numbers do not matter, because they
++ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed
++ * point number), so the value here gives a LATCH of 1 and pretty
++ * much guarantees to flush out any off-by-one errors.
++ *
++ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of
++ * HZ, this is checked in the ixp4xx/common.c code.
+ */
+-#define FREQ 66666666
+-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
++#define CLOCK_TICK_RATE HZ
+
++/* The following allow the exact board tick rate to be set and
++ * discovered. The value should be exactly twice the frequency
++ * (in Hz) of the onboard crystal.
++ */
++extern u32 ixp4xx_get_board_tick_rate(void);
++extern void ixp4xx_set_board_tick_rate(u32 new_rate);
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15
+# Mon Nov 14 10:44:43 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+CONFIG_ARCH_IXP4XX=y
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+
+#
+# Intel IXP4xx Implementation Options
+#
+
+#
+# IXP4xx Platforms
+#
+CONFIG_MACH_NSLU2=y
+# CONFIG_ARCH_AVILA is not set
+# CONFIG_ARCH_ADI_COYOTE is not set
+# CONFIG_ARCH_IXDP425 is not set
+# CONFIG_MACH_IXDPG425 is not set
+# CONFIG_MACH_IXDP465 is not set
+# CONFIG_ARCH_PRPMC1100 is not set
+# CONFIG_MACH_GTWX5715 is not set
+
+#
+# IXP4xx Options
+#
+CONFIG_IXP4XX_INDIRECT_PCI=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_XSCALE_PMU=y
+CONFIG_DMABOUNCE=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@0x00000000 init=/linuxrc rtc-x1205.hctosys=1 rtc-x1205.probe=0,0x6f noirqdebug console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_PHYSDEV=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=y
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_IXP4XX=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=10240
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MACLIST=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_NSLU2_BEEPER=m
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_IXP4XX_WATCHDOG=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_IOP3XX is not set
+CONFIG_I2C_IXP4XX=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+CONFIG_VIDEO_BT848=m
+# CONFIG_VIDEO_SAA6588 is not set
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+CONFIG_VIDEO_STRADIS=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_SAA7134=m
+# CONFIG_VIDEO_SAA7134_ALSA is not set
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_VIDEO_VIDEOBUF=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_BUF=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA ARM devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_W9968CF is not set
+CONFIG_USB_PWC=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_CLASS=y
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+CONFIG_RTC_DRV_X1205=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_NATIVE_ENDIAN is not set
+CONFIG_JFFS2_BIG_ENDIAN=y
+# CONFIG_JFFS2_LITTLE_ENDIAN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
--- /dev/null
+diff -ur linux-2.6.12.2/drivers/scsi/sd.c linux-2.6.12.2_scsi-idle/drivers/scsi/sd.c
+--- linux-2.6.12.2/drivers/scsi/sd.c 2005-08-27 06:12:31.000000000 +0200
++++ linux-2.6.12.2_scsi-idle/drivers/scsi/sd.c 2005-08-27 06:26:50.000000000 +0200
+@@ -266,6 +266,9 @@
+ "count=%d\n", disk->disk_name,
+ (unsigned long long)block, this_count));
+
++ /* Update idle-since time */
++ sdp->idle = jiffies;
++
+ if (!sdp || !scsi_device_online(sdp) ||
+ block + rq->nr_sectors > get_capacity(disk)) {
+ SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
+@@ -600,6 +603,8 @@
+ case SCSI_IOCTL_GET_IDLUN:
+ case SCSI_IOCTL_GET_BUS_NUMBER:
+ return scsi_ioctl(sdp, cmd, p);
++ case SCSI_IOCTL_IDLE:
++ return (jiffies - sdp->idle) / HZ + 1;
+ default:
+ error = scsi_cmd_ioctl(filp, disk, cmd, p);
+ if (error != -ENOTTY)
+diff -ur linux-2.6.12.2/include/scsi/scsi_device.h linux-2.6.12.2_scsi-idle/include/scsi/scsi_device.h
+--- linux-2.6.12.2/include/scsi/scsi_device.h 2005-08-27 06:12:44.000000000 +0200
++++ linux-2.6.12.2_scsi-idle/include/scsi/scsi_device.h 2005-08-27 06:27:09.000000000 +0200
+@@ -125,6 +125,7 @@
+ atomic_t ioerr_cnt;
+
+ int timeout;
++ unsigned long idle; /* scsi idle time in jiffers */
+
+ struct device sdev_gendev;
+ struct class_device sdev_classdev;
+diff -ur linux-2.6.12.2/include/scsi/scsi_ioctl.h linux-2.6.12.2_scsi-idle/include/scsi/scsi_ioctl.h
+--- linux-2.6.12.2/include/scsi/scsi_ioctl.h 2005-08-27 06:12:44.000000000 +0200
++++ linux-2.6.12.2_scsi-idle/include/scsi/scsi_ioctl.h 2005-08-28 17:32:17.000000000 +0200
+@@ -7,6 +7,7 @@
+ #define SCSI_IOCTL_SYNC 4 /* Request synchronous parameters */
+ #define SCSI_IOCTL_START_UNIT 5
+ #define SCSI_IOCTL_STOP_UNIT 6
++#define SCSI_IOCTL_IDLE 4746 /* get idle time in jiffies */
+ /* The door lock/unlock constants are compatible with Sun constants for
+ the cdrom */
+ #define SCSI_IOCTL_DOORLOCK 0x5380 /* lock the eject mechanism */
--- /dev/null
+--- linux-2.6.15/include/net/maclist.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/include/net/maclist.h 1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,23 @@
++#ifndef _MACLIST_H
++#define _MACLIST_H 1
++/*
++ * Interfaces to the MAC repository
++ */
++/*
++ * Add a single entry, returns 0 on success else an error
++ * code. Must *not* be called from an interrupt handler.
++ */
++extern int maclist_add(const u8 id_to_add[6]);
++
++/*
++ * Return the current entry count (valid in any context).
++ */
++extern int maclist_count(void);
++
++/*
++ * Return the ID from the n'th entry (valid in any context),
++ * returns 0 on success, -EINVAL if 'n' is out of range.
++ */
++extern int maclist_read(u8 (*buffer_for_id)[6], int index_of_id_to_return);
++
++#endif /*_MACLIST_H*/
+--- linux-2.6.15/drivers/net/maclist.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/net/maclist.c 1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,314 @@
++/*
++ * drivers/net/maclist.c
++ *
++ * a simple driver to remember ethernet MAC values
++ *
++ * Some Ethernet hardware implementations have no built-in
++ * storage for allocated MAC values - an example is the Intel
++ * IXP420 chip which has support for Ethernet but no defined
++ * way of storing allocated MAC values. With such hardware
++ * different board level implementations store the allocated
++ * MAC (or MACs) in different ways. Rather than put board
++ * level code into a specific Ethernet driver this driver
++ * provides a generally accessible repository for the MACs
++ * which can be written by board level code and read by the
++ * driver.
++ *
++ * The implementation also allows user level programs to
++ * access the MAC information in /proc/net/maclist. This is
++ * useful as it allows user space code to use the MAC if it
++ * is not used by a built-in driver.
++ *
++ * Copyright (C) 2005 John Bowler
++ * Author: John Bowler <jbowler@acm.org>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * External interfaces:
++ * Interfaces to linux kernel (and modules)
++ * maclist_add: add a single MAC
++ * maclist_count: total number of MACs stored
++ * maclist_read: read a MAC 0..(maclist_count-1)
++ */
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/etherdevice.h>
++#include <linux/proc_fs.h>
++#include <linux/errno.h>
++
++#include <net/maclist.h>
++
++#define MACLIST_NAME "maclist"
++
++MODULE_AUTHOR("John Bowler <jbowler@acm.org>");
++MODULE_DESCRIPTION("MAC list repository");
++MODULE_LICENSE("GPL");
++
++typedef struct maclist_entry {
++ struct maclist_entry *next; /* Linked list, first first */
++ u8 id[6]; /* 6 byte Ethernet MAC */
++} maclist_entry_t;
++
++/* Access to this list is possible at any time - entries in
++ * the list are never destroyed. Modification of the list is
++ * safe only from the init code (i.e. modification must be
++ * single threaded), but read from an interrupt at the same
++ * time is possible and safe.
++ */
++static maclist_entry_t *maclist_list = 0;
++
++/*
++ * External interfaces.
++ *
++ * Add a single entry, returns 0 on success else an error
++ * code. Must be single threaded.
++ */
++int maclist_add(const u8 new_id[6]) {
++ maclist_entry_t *new_entry, **tail;
++
++ if (new_id == 0 || !is_valid_ether_addr(new_id)) {
++ printk(KERN_ERR MACLIST_NAME ": invalid ethernet address\n");
++ return -EINVAL;
++ }
++ new_entry = kmalloc(sizeof *new_entry, GFP_KERNEL);
++ if (new_entry == 0)
++ return -ENOMEM;
++ new_entry->next = 0;
++ memcpy(new_entry->id, new_id, sizeof new_entry->id);
++
++ tail = &maclist_list;
++ while (*tail != 0)
++ tail = &(*tail)->next;
++ *tail = new_entry;
++ return 0;
++}
++EXPORT_SYMBOL(maclist_add);
++
++/*
++ * Return the current entry count (valid in any context).
++ */
++int maclist_count(void) {
++ maclist_entry_t *tail = maclist_list;
++ int count = 0;
++
++ while (tail != 0) {
++ tail = tail->next;
++ ++count;
++ }
++
++ return count;
++}
++EXPORT_SYMBOL(maclist_count);
++
++/*
++ * Return the ID from the n'th entry (valid in any context),
++ * returns 0 on success, -EINVAL if 'n' is out of range.
++ */
++int maclist_read(u8 (*id)[6], int n) {
++ maclist_entry_t *entry = maclist_list;
++
++ while (n > 0 && entry != 0) {
++ --n;
++ entry = entry->next;
++ }
++
++ if (n == 0 && entry != 0) {
++ memcpy(id, entry->id, sizeof *id);
++ return 0;
++ }
++
++ printk(KERN_ERR MACLIST_NAME ": id does not exist\n");
++ return -EINVAL;
++}
++EXPORT_SYMBOL(maclist_read);
++
++/*
++ * Parameter parsing. The option string is a list of MAC
++ * addresses, comma separated. (The parsing really should
++ * be somewhere central...)
++ */
++static int __init maclist_setup(char *param) {
++ int bytes = 0, seen_a_digit = 0;
++ u8 id[6];
++
++ memset(id, 0, sizeof id);
++
++ if (param) do {
++ int digit = -1;
++ switch (*param) {
++ case '0': digit = 0; break;
++ case '1': digit = 1; break;
++ case '2': digit = 2; break;
++ case '3': digit = 3; break;
++ case '4': digit = 4; break;
++ case '5': digit = 5; break;
++ case '6': digit = 6; break;
++ case '7': digit = 7; break;
++ case '8': digit = 8; break;
++ case '9': digit = 9; break;
++ case 'a': case 'A': digit = 10; break;
++ case 'b': case 'B': digit = 11; break;
++ case 'c': case 'C': digit = 12; break;
++ case 'd': case 'D': digit = 13; break;
++ case 'e': case 'E': digit = 14; break;
++ case 'f': case 'F': digit = 15; break;
++ case ':':
++ if (seen_a_digit)
++ bytes = (bytes+1) & ~1;
++ else
++ bytes += 2; /* i.e. ff::ff is ff:00:ff */
++ seen_a_digit = 0;
++ break;
++ case 0:
++ if (bytes == 0) /* nothing new seen so far */
++ return 0;
++ /*fall through*/
++ case ',': case ';':
++ if (bytes > 0)
++ bytes = 12; /* i.e. all trailing bytes 0 */
++ break;
++ default:
++ printk(KERN_ERR MACLIST_NAME ": invalid character <%c[%d]>\n",
++ *param, *param);
++ return -EINVAL;
++ }
++
++ if (digit >= 0) {
++ id[bytes>>1] = (id[bytes>>1] << 4) + digit; break;
++ ++bytes;
++ seen_a_digit = 1;
++ }
++
++ if (bytes >= 12) {
++ int rc = maclist_add(id);
++ if (rc)
++ return rc;
++ bytes = 0;
++ seen_a_digit = 0;
++ memset(id, 0, sizeof id);
++ if (*param == 0)
++ return 0;
++ }
++ ++param;
++ } while (1);
++
++ return 0;
++}
++
++/*
++ * procfs support, if compiled in.
++ */
++#ifdef CONFIG_PROC_FS
++/*
++ * Character device read
++ */
++static int maclist_getchar(off_t n) {
++ static char xdigit[16] = "0123456789abcdef";
++ maclist_entry_t *head = maclist_list;
++ int b;
++
++ do {
++ if (head == 0)
++ return -1;
++ if (n < 18)
++ break;
++ head = head->next;
++ n -= 18;
++ } while (1);
++
++ if (n == 17)
++ return '\n';
++
++ b = n/3;
++ switch (n - b*3) {
++ case 0: return xdigit[head->id[b] >> 4];
++ case 1: return xdigit[head->id[b] & 0xf];
++ default: return ':';
++ }
++}
++
++/*
++ * The extensively undocumented proc_read_t callback is implemented here.
++ * Go look in fs/proc/generic.c:
++ *
++ * Prototype:
++ * int f(char *buffer, char **start, off_t offset,
++ * int count, int *peof, void *dat)
++ *
++ * Assume that the buffer is "count" bytes in size.
++ *
++ * 2) Set *start = an address within the buffer.
++ * Put the data of the requested offset at *start.
++ * Return the number of bytes of data placed there.
++ * If this number is greater than zero and you
++ * didn't signal eof and the reader is prepared to
++ * take more data you will be called again with the
++ * requested offset advanced by the number of bytes
++ * absorbed.
++ */
++static int maclist_proc_read(char *buffer, char **start, off_t offset,
++ int count, int *peof, void *dat) {
++ int total;
++
++ *start = buffer;
++ total = 0;
++
++ while (total < count) {
++ int ch = maclist_getchar(offset++);
++ if (ch == -1) {
++ *peof = 1;
++ break;
++ }
++ *buffer++ = ch;
++ ++total;
++ }
++
++ return total;
++}
++#endif
++
++/*
++ * Finally, the init/exit functions.
++ */
++static void __exit maclist_exit(void)
++{
++ maclist_entry_t *list;
++
++ remove_proc_entry(MACLIST_NAME, proc_net);
++
++ list = maclist_list;
++ maclist_list = 0;
++
++ while (list != 0) {
++ maclist_entry_t *head = list;
++ list = head->next;
++ kfree(head);
++ }
++}
++
++#ifdef MODULE
++static char ids[256];
++module_param_string(ids, ids, sizeof ids, 0);
++MODULE_PARM_DESC(ids, "comma separated list of MAC ids\n");
++#else
++__setup("maclist_ids=", maclist_setup);
++#endif
++
++static int __init maclist_init(void)
++{
++# ifdef MODULE
++ if (ids[0])
++ maclist_setup(ids);
++# endif
++
++ /* Ignore failure, the module will still work. */
++ (void)create_proc_read_entry(MACLIST_NAME, S_IRUGO, proc_net, maclist_proc_read, NULL);
++
++ return 0;
++}
++
++module_init(maclist_init);
++module_exit(maclist_exit);
+--- linux-2.6.15/drivers/net/Makefile 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/net/Makefile 1970-01-01 00:00:00.000000000 +0000
+@@ -70,6 +70,7 @@ obj-$(CONFIG_RIONET) += rionet.o
+ # end link order section
+ #
+
++obj-$(CONFIG_MACLIST) += maclist.o
+ obj-$(CONFIG_MII) += mii.o
+ obj-$(CONFIG_PHYLIB) += phy/
+
+--- linux-2.6.15/drivers/net/Kconfig 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/net/Kconfig 1970-01-01 00:00:00.000000000 +0000
+@@ -166,6 +166,21 @@ config NET_ETHERNET
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Ethernet network cards. If unsure, say N.
+
++config MACLIST
++ tristate "Ethernet MAC repository"
++ depends on NET_ETHERNET
++ help
++ Some ethernet controllers have no built-in way of obtaining an
++ appropriate Ethernet MAC address. Such controllers have to be
++ initialised in a board-specific way, depending on how the allocated
++ MAC is stored. The MAC repository provides a set of APIs and a
++ proc entry (/proc/net/maclist) to store MAC values from the board
++ so that such drivers can obtain a MAC address without board-specific
++ code. You do not need to enable this device - it will be selected
++ automatically by any device which requires it. It is only useful
++ to enable it manually when building a device driver independently
++ of the kernel build.
++
+ config MII
+ tristate "Generic Media Independent Interface device support"
+ depends on NET_ETHERNET
--- /dev/null
+--- linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/arch/arm/mach-ixp4xx/Kconfig 1970-01-01 00:00:00.000000000 +0000
+@@ -11,8 +11,8 @@ comment "IXP4xx Platforms"
+ # This entry is placed on top because otherwise it would have
+ # been shown as a submenu.
+ config MACH_NSLU2
+- bool
+- prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
++ bool "NSLU2"
++ select MACLIST
+ help
+ Say 'Y' here if you want your kernel to support Linksys's
+ NSLU2 NAS device. For more information on this platform,
+--- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
+@@ -16,11 +16,14 @@
+ #include <linux/kernel.h>
+ #include <linux/serial.h>
+ #include <linux/serial_8250.h>
++#include <linux/mtd/mtd.h>
+
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+ #include <asm/mach/flash.h>
+
++#include <net/maclist.h>
++
+ static struct flash_platform_data nslu2_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+@@ -112,6 +115,37 @@ static void nslu2_power_off(void)
+ gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
+ }
+
++/*
++ * When the RedBoot partition is added the MAC address is read from
++ * it.
++ */
++void flash_add(struct mtd_info *mtd) {
++ if (strcmp(mtd->name, "RedBoot") == 0) {
++ size_t retlen;
++ u_char mac[6];
++
++ /* The MAC is at a known offset... */
++ if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) {
++ printk(KERN_INFO "NSLU2 MAC: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++ maclist_add(mac);
++ } else {
++ printk(KERN_ERR "NSLU2 MAC: read failed\n");
++ }
++ }
++}
++
++/*
++ * Nothing to do on remove at present.
++ */
++void flash_remove(struct mtd_info *mtd) {
++}
++
++struct mtd_notifier flash_notifier = {
++ .add = flash_add,
++ .remove = flash_remove,
++};
++
+ static void __init nslu2_init(void)
+ {
+ /* The NSLU2 has a 33MHz crystal on board - 1.01% different
+@@ -119,6 +153,11 @@ static void __init nslu2_init(void)
+ */
+ ixp4xx_set_board_tick_rate(66000000);
+
++ /* The flash has an ethernet MAC embedded in it which we need,
++ * that is all this notifier does.
++ */
++ register_mtd_user(&flash_notifier);
++
+ ixp4xx_sys_init();
+
+ pm_power_off = nslu2_power_off;
--- /dev/null
+--- linux-2.6.11/arch/arm/Makefile.orig 2005-03-20 15:02:07.587138712 -0800
++++ linux-2.6.11/arch/arm/Makefile 2005-03-20 15:10:36.546765088 -0800
+@@ -33,6 +33,12 @@
+ AFLAGS += -mlittle-endian
+ endif
+
++ifeq ($(CONFIG_ARM_THUMB_INTERWORK),y)
++CFLAGS += -mthumb-interwork
++else
++CFLAGS += -mno-thumb-interwork
++endif
++
+ comma = ,
+
+ # This selects which instruction set is used.
+@@ -43,6 +49,8 @@
+ arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
+ arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
+ arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
++# The following overrides the CPU_32v5 setting if specified
++arch-$(CONFIG_ARCH_XSCALE) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=xscale,-march=armv5te)
+
+ # This selects how we optimise for the processor.
+ tune-$(CONFIG_CPU_ARM610) :=-mtune=arm610
+--- linux-2.6.11/arch/arm/mm/Kconfig.orig 2005-03-20 14:54:07.927058128 -0800
++++ linux-2.6.11/arch/arm/mm/Kconfig 2005-03-20 15:01:26.727350344 -0800
+@@ -366,6 +366,31 @@
+
+ If you don't know what this all is, saying Y is a safe choice.
+
++config ARM_THUMB_INTERWORK
++ bool "Support Thumb code within the kernel"
++ depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_V6
++ default n
++ help
++ Say Y to compile the whole kernel with support for the interworking
++ of the 16 bit thumb instruction set and 32 bit ARM instruction set.
++
++ You only need this if some parts of the kernel will be compiled
++ as thumb code, this is not usual. It increases the total kernel
++ size by about 3%.
++
++config ARCH_XSCALE
++ bool "Use -march=xscale in preference to -march=armv5te"
++ depends on CPU_XSCALE
++ default y
++ help
++ Say yes to ask gcc to use the xscale architecture (instruction set)
++ in preference to armv5te. This allows gcc to use the extra xscale
++ instructions but means the code will not run on a standard (non-xscale)
++ armv5te. At present this makes no difference - gcc 3.4.3 does not
++ generate any xscale specific instructions - however gcc 3.4.3 does
++ generate slightly more optimal instructions if this is specified (this
++ is an error inside gcc 3.4.3 which should be fixed in 4.1.)
++
+ config CPU_BIG_ENDIAN
+ bool "Build big-endian kernel"
+ depends on ARCH_SUPPORTS_BIG_ENDIAN
--- /dev/null
+--- linux-2.6.11/.pc/2.6.patch/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-03-01 23:37:49.000000000 -0800
++++ linux-2.6.11/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2005-06-17 17:51:32.569981939 -0700
+@@ -52,7 +52,7 @@
+ * Expansion BUS Configuration registers
+ */
+ #define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000)
+-#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFD000)
++#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000)
+ #define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000)
+
+ /*
--- /dev/null
+--- nslu2-io.c.old 2da1d3f5c0aa0804c5769588337077ddcb35c5e9
++++ linux-2.6.12.2/arch/arm/mach-ixp4xx/nslu2-io.c e895da638b4aae16a11fafe52ae0b063645a9a12
+@@ -158,6 +158,8 @@
+ #define LED_DISK2 3
+ #define LED_ALL 4
+
++static int nslu2_shutdown_in_progress = 0;
++
+ static unsigned long init_jiffy = 0; //jiffies at init time
+ static unsigned long rb_presses = 0; //number of reset button presses
+ static unsigned long ontime = 50;
+@@ -503,40 +505,20 @@
+ static irqreturn_t n2pb_handler (int irq, void *dev_id, struct pt_regs *regs)
+ {
+ void *ret;
+-
+- wake_up(&n2pb_waitq);
+- remove_proc_entry(PWR_OFF_STR, NULL); //no parent
+- n2_buzz(N2_BEEP_PITCH_MED, N2_BEEP_DUR_MED);
+- ret = create_proc_entry(PWR_OFF_STR, 0, NULL);
+- nslu2_io_debug((KERN_DEBUG "cpe ret = %p\n", ret));
+-
+-// WARNING: This is RUDE...it unconditionally pulls the power plug.
+-// Your data will be at risk...since this is just a test system
+-// I am leaving it enabled...eventually userland needs to get the
+-// message, do an orderly shutdown and use an ioctl or something in
+-// /proc/powerdowm to actually have us pull the plug.
+-
+- machine_power_off();
+-
++ if (!nslu2_shutdown_in_progress++) {
++ wake_up(&n2pb_waitq);
++ remove_proc_entry(PWR_OFF_STR, NULL); //no parent
++ n2_buzz(N2_BEEP_PITCH_HIGH, N2_BEEP_DUR_SHORT); // Short, high-pitched "OK"
++ ret = create_proc_entry(PWR_OFF_STR, 0, NULL);
++ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed. Shutting down. cpe ret = %p\n", ret));
++ kill_proc(1,SIGINT,1); // Signal init to shut down
++ } else {
++ n2_buzz(N2_BEEP_PITCH_LOW, N2_BEEP_DUR_MED); // Make a scary noise!
++ nslu2_io_debug((KERN_DEBUG "Powerbutton pressed while already in shutdown")); // Whine!
++ }
+ return IRQ_HANDLED;
+ }
+
+-//==================================================================================================
+-//
+-//static void do_rb_timeout(unsigned long data)
+-//{
+-// int i;
+-//
+-// for (i = 0; i < rb_presses; i++)
+-// n2_buzz(N2_BEEP_PITCH_MED,N2_BEEP_DUR_SHORT);
+-// return;
+-//}
+-//
+-//==================================================================================================
+-// does nothing -- waiting for userland to define
+-// This thing is sorta braindead...edge triggered IRQs aren't available in the drivers yet...so
+-// we hang in a loop until the button is no longer pressed
+-
+ struct testr {
+ int ctl;
+ long param;
+@@ -544,72 +526,11 @@
+
+ static irqreturn_t n2rb_handler (int irq, void *dev_id, struct pt_regs *regs)
+ {
++// This doesn't reset the NSLU2. It powers it off. Close enough, since reset is unreliable
+
+- static struct testr test[] = {
+- { N2LM_ALL_OFF,0 },
+- { N2LM_ON,0 },
+- { N2LM_OFF,0 },
+- { N2LM_ON,1 },
+- { N2LM_ALL_OFF,1 },
+- { N2LM_ON,2 },
+- { N2LM_OFF,2 },
+- { N2LM_ON,3 },
+- { N2LM_OFF,3 },
+- { N2LM_BLINK,0 },
+- { N2LM_OFF,0 },
+- { N2LM_BLINK,1 },
+- { N2LM_OFF,1 },
+- { N2LM_BLINK,2 },
+- { N2LM_OFF,2 },
+- { N2LM_BLINK,3 },
+- { N2LM_OFF,3 },
+- { N2LM_ALL_OFF,0 },
+- { N2LM_ALT,1 },
+- { N2LM_OFF,1 },
+- { N2LM_ALL_ON,0 }
+- };
+-
+- nslu2_io_debug(("Reset Entry IRQ =%d Presses = %d Jiffies = %08lx\tIO = %x\tIOW = %x\n", irq, rb_presses, jiffies, (int)_IO('M',rb_presses), (int)_IOW('M',rb_presses,long)));
+-
+ wake_up(&n2rb_waitq);
+- while ((*IXP4XX_GPIO_GPINR & GPIO_RB_BM) == 0)
+- ; //wait for button release
+-
+- if (rb_presses > 20)
+- rb_presses = 0;
+- tone = (rb_presses * 50) + 200;
+- ontime = (rb_presses*10) + 100;
+- offtime = 500 - (rb_presses*20);
+- nslu2_io_debug(("Ontime = %d\tOfftime = %d\tTone = %d\n",ontime,offtime,tone));
+- rb_presses++;
+-
+- n2bz_ioctl(NULL,NULL, N2BZ_BEEPS, rb_presses);
+- n2lm_ioctl(NULL,NULL, test[rb_presses].ctl, test[rb_presses].param);
+-// if (rb_presses == 0) {
+-// init_jiffy = jiffies;
+-// init_timer (&n2rb_timer);
+-// n2rb_timer.function = do_rb_timeout;
+-// };
+-//
+-// if (rb_presses == 8)
+-// rb_presses = 0;
+-// if (rb_presses & 1)
+-// n2lm_ledon(test[rb_presses]);
+-// else
+-// n2lm_ledoff(test[rb_presses]);
+-//
+-// n2rb_timer.expires = (jiffies + RB_DELAY);
+-// add_timer (&n2rb_timer);
+-// if (rb_presses < 5) {
+-// if (rb_presses > 0)
+-// n2lm_ledoff(rb_presses);
+-// n2lm_ledon(++rb_presses);
+-// n2lm_timer_start(rb_presses);
+-// };
+-
+- nslu2_io_debug((KERN_DEBUG "Reset Exit IRQ=%d Presses= %d Jiffies= %08lx\n", irq, rb_presses, jiffies));
+- return IRQ_HANDLED;
+-
++ machine_power_off();
++ return IRQ_HANDLED; // So we don't get a nobody cared error :-P
+ }
+
+ //==================================================================================================
--- /dev/null
+# This patch changes the thumb swi handling for any thumb swi with
+# an immediate value != 0, those swis are mapped into the arm
+# specific swis. This implements a thumb breakpoint swi.
+--- linux-2.6.12.2/arch/arm/kernel/entry-common.S.orig 2005-09-19 12:48:42.323365573 -0700
++++ linux-2.6.12.2/arch/arm/kernel/entry-common.S 2005-09-19 13:31:19.004247358 -0700
+@@ -137,8 +137,11 @@
+ */
+ #ifdef CONFIG_ARM_THUMB
+ tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs
+- addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
+- ldreq scno, [lr, #-4]
++ ldrneh ip, [lr, #-2] @ thumb swi instruction
++ ldreq scno, [lr, #-4] @ arm swi instruction
++ addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in to thumb r7 value
++ bicnes ip, ip, #0xff00 @ clear thumb swi bits
++ addne scno, ip, #__ARM_NR_BASE @ thumb swi0->r7, swi!0->arm swi
+ #else
+ ldr scno, [lr, #-4] @ get SWI instruction
+ #endif
--- /dev/null
+# Fix for the NSLU2 timer problem (tickadj 10101.01 when it should be 10000)
+# Also contains a fix for the more generate problem on the ixp4xx in that the
+# Intel spec says to use a 33.33MHz crystal, not 33.333333Mhz
+
+--- linux-2.6.12.2/include/asm-arm/arch-ixp4xx/timex.h.orig 2005-08-05 11:02:09.872690723 -0700
++++ linux-2.6.12.2/include/asm-arm/arch-ixp4xx/timex.h 2005-08-05 11:45:08.786971567 -0700
+@@ -7,7 +7,14 @@
+
+ /*
+ * We use IXP425 General purpose timer for our timer needs, it runs at
+- * 66.66... MHz
++ * 66.66 MHz (exactly) by the Intel specification.
+ */
+-#define CLOCK_TICK_RATE (66666666)
+-
++#if 0
++#define CLOCK_TICK_RATE (66660000)
++#else
++/*
++ * Unfortunately the NSLU2 has a 33MHz crystal, so the rate is not the
++ * specified one.
++ */
++#define CLOCK_TICK_RATE (66000000)
++#endif
--- /dev/null
+--- linux-2.6.11/.pc/2.6.patch/drivers/i2c/chips/Kconfig 2005-06-17 17:51:28.635578329 -0700
++++ linux-2.6.11/drivers/i2c/chips/Kconfig 2005-06-17 17:51:32.565982545 -0700
+@@ -430,6 +430,15 @@
+
+ This driver can also be built as a module. If so, the module
+ will be called isp1301_omap.
++config SENSORS_X1205
++ tristate "Xicor X1205 RTC chip"
++ depends on I2C && EXPERIMENTAL
++ select I2C_SENSOR
++ help
++ If you say yes here you get support for the Xicor x1205 RTC chip.
++
++ This driver can also be built as a module. If so, the module
++ will be called x1205-rtc
+
+ config SENSORS_M41T00
+ tristate "ST M41T00 RTC chip"
+--- linux-2.6.11/.pc/2.6.patch/drivers/i2c/chips/Makefile 2005-06-17 17:51:28.636578177 -0700
++++ linux-2.6.11/drivers/i2c/chips/Makefile 2005-06-17 17:51:32.566982394 -0700
+@@ -41,6 +41,7 @@
+ obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
+ obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
+ obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
++obj-$(CONFIG_SENSORS_X1205) += x1205-rtc.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
+ EXTRA_CFLAGS += -DDEBUG
+--- linux-2.6.11/.pc/2.6.patch/include/linux/i2c-id.h 2005-06-17 17:51:31.358165630 -0700
++++ linux-2.6.11/include/linux/i2c-id.h 2005-06-17 17:51:32.569981939 -0700
+@@ -108,6 +108,7 @@
+ #define I2C_DRIVERID_TDA7313 62 /* TDA7313 audio processor */
+ #define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */
+ #define I2C_DRIVERID_SAA7114H 64 /* video decoder */
++#define I2C_DRIVERID_X1205 0xF0
+
+
+ #define I2C_DRIVERID_EXP0 0xF0 /* experimental use id's */
--- /dev/null
+--- linux-2.6.11.2/scripts/mkcompile_h.orig 2005-05-07 05:27:02.440000000 +0000
++++ linux-2.6.11.2/scripts/mkcompile_h 2005-05-07 05:28:30.360000000 +0000
+@@ -43,16 +43,9 @@
+ echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\"
+
+ echo \#define LINUX_COMPILE_TIME \"`LC_ALL=C LANG=C date +%T`\"
+- echo \#define LINUX_COMPILE_BY \"`whoami`\"
+- echo \#define LINUX_COMPILE_HOST \"`hostname | $UTS_TRUNCATE`\"
+-
+- if [ -x /bin/dnsdomainname ]; then
+- echo \#define LINUX_COMPILE_DOMAIN \"`dnsdomainname | $UTS_TRUNCATE`\"
+- elif [ -x /bin/domainname ]; then
+- echo \#define LINUX_COMPILE_DOMAIN \"`domainname | $UTS_TRUNCATE`\"
+- else
+- echo \#define LINUX_COMPILE_DOMAIN
+- fi
++ echo \#define LINUX_COMPILE_BY \"openslug\"
++ echo \#define LINUX_COMPILE_HOST \"openslug.org\"
++ echo \#define LINUX_COMPILE_DOMAIN \"openslug.org\"
+
+ echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | tail -n 1`\"
+ ) > .tmpcompile
--- /dev/null
+# Kernel for NSLU2
+#
+# Increment PR_CONFIG for changes to the nslu2-kernel specific
+# defconfig (do *NOT* increment anything in here for changes
+# to other kernel configs!)
+PR_CONFIG = "0"
+#
+# Increment the number below (i.e. the digits after PR) when
+# making changes within this file or for changes to the patches
+# applied to the kernel.
+PR = "r1.${PR_CONFIG}"
+
+require nslu2-kernel.inc
+
+# N2K_PATCHES - full list of patches to apply
+N2K_PATCHES = "\
+ file://00-memory-h-page-shift.patch;patch=1 \
+ file://90-ixp4xx-pci-le.patch;patch=1 \
+ file://18-ixp4xx-io-h-addr.patch;patch=1 \
+ file://19-jffs2-force-be.patch;patch=1 \
+ file://20-timer.patch;patch=1 \
+ file://29-ipv4-route-c-spinlock.patch;patch=1 \
+ file://30-i2c-x1205-mm1.patch;patch=1 \
+ file://50-nslu2-arch.patch;patch=1 \
+ file://55-nslu2-rtc.patch;patch=1 \
+ file://60-nslu2-beeper.patch;patch=1 \
+ file://70-nslu2-io.patch;patch=1 \
+ file://75-nslu2-leds.patch;patch=1 \
+ file://80-nslu2-class-device-create.patch;patch=1 \
+ file://90-pegasus.patch;patch=1 \
+ file://anonymiser.patch;patch=1 \
+"
+
+# These options get added to the kernel command line, only put things
+# specific to the bootstrap of *this* kernel in here - DISTRO specfic
+# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
+# in nslu2-kernel.inc)
+CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1"
--- /dev/null
+# Kernel for NSLU2
+#
+# Increment PR_CONFIG for changes to the nslu2-kernel specific
+# defconfig (do *NOT* increment anything in here for changes
+# to other kernel configs!)
+PR_CONFIG = "0"
+#
+# Increment the number below (i.e. the digits after PR) when
+# making changes within this file or for changes to the patches
+# applied to the kernel.
+PR = "r0.${PR_CONFIG}"
+
+require nslu2-kernel.inc
+
+# N2K_PATCHES - full list of patches to apply
+N2K_PATCHES = "\
+ file://90-ixp4xx-pci-le.patch;patch=1 \
+ file://10-ixp4xx-copy-from.patch;patch=1 \
+ file://10-ixp4xx-le.patch;patch=1 \
+ file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \
+ file://15-ixp4xx-writesb-l-w.patch;patch=1 \
+ file://18-ixp4xx-io-h-addr.patch;patch=1 \
+ file://19-jffs2-force-be.patch;patch=1 \
+ file://29-ipv4-route-c-spinlock.patch;patch=1 \
+ file://30-i2c-x1205.patch;patch=1 \
+ file://50-nslu2-arch.patch;patch=1 \
+ file://55-nslu2-rtc.patch;patch=1 \
+ file://60-nslu2-beeper.patch;patch=1 \
+ file://70-nslu2-io.patch;patch=1 \
+ file://75-nslu2-leds.patch;patch=1 \
+ file://90-pegasus.patch;patch=1 \
+ file://20-timer.patch;patch=1 \
+ file://91-maclist.patch;patch=1 \
+ file://92-nslu2-maclist.patch;patch=1 \
+ file://anonymiser.patch;patch=1 \
+"
+
+# These options get added to the kernel command line, only put things
+# specific to the bootstrap of *this* kernel in here - DISTRO specfic
+# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
+# in nslu2-kernel.inc)
+CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1"
--- /dev/null
+# Kernel for NSLU2
+#
+# Increment PR_CONFIG for changes to the nslu2-kernel specific
+# defconfig (do *NOT* increment anything in here for changes
+# to other kernel configs!)
+PR_CONFIG = "0"
+#
+# Increment the number below (i.e. the digits after PR) when
+# making changes within this file or for changes to the patches
+# applied to the kernel.
+PR = "r3.${PR_CONFIG}"
+
+require nslu2-kernel.inc
+
+# N2K_PATCHES - full list of patches to apply
+N2K_PATCHES = "\
+ file://00-memory-h-page-shift.patch;patch=1 \
+ file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \
+ file://15-jffs2-endian-config.patch;patch=1 \
+ file://40-rtc-class.patch;patch=1 \
+ file://40-scsi-idle.patch;patch=1 \
+ file://60-nslu2-beeper.patch;patch=1 \
+ file://75-nslu2-leds.patch;patch=1 \
+ file://80-nslu2-io.patch;patch=1 \
+ file://85-timer.patch;patch=1 \
+ file://91-maclist.patch;patch=1 \
+ file://92-nslu2-maclist.patch;patch=1 \
+ file://anonymiser.patch;patch=1 \
+"
+
+# These options get added to the kernel command line, only put things
+# specific to the bootstrap of *this* kernel in here - DISTRO specfic
+# config must be in CMDLINE_ROOT (see the full definition of CMDLINE
+# in nslu2-kernel.inc)
+CMDLINE_KERNEL_OPTIONS = "rtc-x1205.hctosys=1 rtc-x1205.probe=0,0x6f"
S = "${WORKDIR}/trunk"
PACKAGES = "libviaXvMC libviaXvMCPro libviaXvMC-dev libviaXvMCPro-dev libviaXvMC-dbg libviaXvMCPro-dbg ${PN}-doc"
+PACKAGES_DYNAMIC = "xorg-driver-via"
FILES_libviaXvMC = "${libdir}/libviaXvMC.so.*"
FILES_libviaXvMCPro = "${libdir}/libviaXvMCPro.so.*"
+++ /dev/null
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
-Index: portmap_5beta/Makefile
-===================================================================
---- portmap_5beta.orig/Makefile 2006-12-19 10:32:58.000000000 +0000
-+++ portmap_5beta/Makefile 2006-12-19 10:35:54.000000000 +0000
-@@ -110,6 +110,13 @@
- #
- #CONST = -Dconst=
-
-+DESTDIR =
-+prefix = /usr
-+sbindir = /sbin
-+datadir = $(prefix)/share
-+mandir = $(datadir)/man
-+docdir = $(datadir)/doc/portmap
-+
- ### End of configurable stuff.
- ##############################
-
-@@ -127,7 +134,7 @@
- COPT = $(CONST) $(HOSTS_ACCESS) $(CHECK_PORT) \
- $(SYS) -DFACILITY=$(FACILITY) $(ULONG) $(ZOMBIES) $(BROKEN_PIPE) \
- $(SA_LEN) $(LOOPBACK) $(SETPGRP)
--CFLAGS = -Wall $(COPT) -O2 $(NSARCHS)
-+CFLAGS = -Wall -O2 $(NSARCHS)
- OBJECTS = portmap.o pmap_check.o from_local.o $(AUX)
-
- all: portmap pmap_dump pmap_set
-@@ -142,20 +149,23 @@
- $(CC) $(CFLAGS) -o $@ $? $(LIBS)
-
- from_local: from_local.c
-- cc $(CFLAGS) -DTEST -o $@ from_local.c
-+ $(CC) $(COPT) -DTEST $(CFLAGS) $(LDFLAGS) -o $@ from_local.c
-
- get_myaddress: get_myaddress.c
-- cc $(CFLAGS) -DTEST -o $@ get_myaddress.c $(LIBS)
-+ $(CC) $(COPT) -DTEST $(CFLAGS) $(LDFLAGS) -o $@ get_myaddress.c $(LIBS)
-
- install: all
-- install -o root -g root -m 0755 -s portmap ${BASEDIR}/sbin
-- install -o root -g root -m 0755 -s pmap_dump ${BASEDIR}/sbin
-- install -o root -g root -m 0755 -s pmap_set ${BASEDIR}/sbin
-- install -o root -g root -m 0644 portmap.8 ${BASEDIR}/usr/share/man/man8
-- install -o root -g root -m 0644 pmap_dump.8 ${BASEDIR}/usr/share/man/man8
-- install -o root -g root -m 0644 pmap_set.8 ${BASEDIR}/usr/share/man/man8
-- cat BLURB >${BASEDIR}/usr/share/doc/portmap/portmapper.txt
-- gzip -9f ${BASEDIR}/usr/share/doc/portmap/portmapper.txt
-+ install -d $(DESTDIR)/$(sbindir) \
-+ $(DESTDIR)/$(docdir) \
-+ $(DESTDIR)/$(mandir)/man8
-+ install -m 0755 portmap ${DESTDIR}/sbin
-+ install -m 0755 pmap_dump ${DESTDIR}/sbin
-+ install -m 0755 pmap_set ${DESTDIR}/sbin
-+ install -m 0644 portmap.8 ${DESTDIR}/usr/share/man/man8
-+ install -m 0644 pmap_dump.8 ${DESTDIR}/usr/share/man/man8
-+ install -m 0644 pmap_set.8 ${DESTDIR}/usr/share/man/man8
-+ cat BLURB >${DESTDIR}/usr/share/doc/portmap/portmapper.txt
-+ gzip -9f ${DESTDIR}/usr/share/doc/portmap/portmapper.txt
-
-
- lint:
-@@ -181,3 +191,6 @@
- portmap.o: portmap.c
- portmap.o: pmap_check.h Makefile
- strerror.o: strerror.c
-+
-+%.o: %.c
-+ $(CC) $(COPT) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c $*.c -o $*.o
--- /dev/null
+
+#
+# Patch managed by http://www.holgerschurig.de/patcher.html
+#
+
+Index: portmap_5beta/Makefile
+===================================================================
+--- portmap_5beta.orig/Makefile 2006-12-19 10:32:58.000000000 +0000
++++ portmap_5beta/Makefile 2006-12-19 10:35:54.000000000 +0000
+@@ -110,6 +110,13 @@
+ #
+ #CONST = -Dconst=
+
++DESTDIR =
++prefix = /usr
++sbindir = /sbin
++datadir = $(prefix)/share
++mandir = $(datadir)/man
++docdir = $(datadir)/doc/portmap
++
+ ### End of configurable stuff.
+ ##############################
+
+@@ -127,7 +134,7 @@
+ COPT = $(CONST) $(HOSTS_ACCESS) $(CHECK_PORT) \
+ $(SYS) -DFACILITY=$(FACILITY) $(ULONG) $(ZOMBIES) $(BROKEN_PIPE) \
+ $(SA_LEN) $(LOOPBACK) $(SETPGRP)
+-CFLAGS = -Wall $(COPT) -O2 $(NSARCHS)
++CFLAGS = -Wall -O2 $(NSARCHS)
+ OBJECTS = portmap.o pmap_check.o from_local.o $(AUX)
+
+ all: portmap pmap_dump pmap_set
+@@ -142,20 +149,23 @@
+ $(CC) $(CFLAGS) -o $@ $? $(LIBS)
+
+ from_local: from_local.c
+- cc $(CFLAGS) -DTEST -o $@ from_local.c
++ $(CC) $(COPT) -DTEST $(CFLAGS) $(LDFLAGS) -o $@ from_local.c
+
+ get_myaddress: get_myaddress.c
+- cc $(CFLAGS) -DTEST -o $@ get_myaddress.c $(LIBS)
++ $(CC) $(COPT) -DTEST $(CFLAGS) $(LDFLAGS) -o $@ get_myaddress.c $(LIBS)
+
+ install: all
+- install -o root -g root -m 0755 -s portmap ${BASEDIR}/sbin
+- install -o root -g root -m 0755 -s pmap_dump ${BASEDIR}/sbin
+- install -o root -g root -m 0755 -s pmap_set ${BASEDIR}/sbin
+- install -o root -g root -m 0644 portmap.8 ${BASEDIR}/usr/share/man/man8
+- install -o root -g root -m 0644 pmap_dump.8 ${BASEDIR}/usr/share/man/man8
+- install -o root -g root -m 0644 pmap_set.8 ${BASEDIR}/usr/share/man/man8
+- cat BLURB >${BASEDIR}/usr/share/doc/portmap/portmapper.txt
+- gzip -9f ${BASEDIR}/usr/share/doc/portmap/portmapper.txt
++ install -d $(DESTDIR)/$(sbindir) \
++ $(DESTDIR)/$(docdir) \
++ $(DESTDIR)/$(mandir)/man8
++ install -m 0755 portmap ${DESTDIR}/sbin
++ install -m 0755 pmap_dump ${DESTDIR}/sbin
++ install -m 0755 pmap_set ${DESTDIR}/sbin
++ install -m 0644 portmap.8 ${DESTDIR}/usr/share/man/man8
++ install -m 0644 pmap_dump.8 ${DESTDIR}/usr/share/man/man8
++ install -m 0644 pmap_set.8 ${DESTDIR}/usr/share/man/man8
++ cat BLURB >${DESTDIR}/usr/share/doc/portmap/portmapper.txt
++ gzip -9f ${DESTDIR}/usr/share/doc/portmap/portmapper.txt
+
+
+ lint:
+@@ -181,3 +191,6 @@
+ portmap.o: portmap.c
+ portmap.o: pmap_check.h Makefile
+ strerror.o: strerror.c
++
++%.o: %.c
++ $(CC) $(COPT) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c $*.c -o $*.o
+++ /dev/null
-require portmap.inc
--- /dev/null
+require portmap.inc
#!/bin/sh
# dont handle non-wireless interfaces
-if [ -n `cat /proc/net/wireless|grep $IFACE` ]; then
+if [ -n "`cat /proc/net/wireless|grep $IFACE`" ]; then
exit 0
fi
# lets hope that run-parts obeys the order :D
-exit 0
\ No newline at end of file
+exit 0
DEPENDS = "prism3-firmware hostap-utils"
RDEPENDS = "prism3-firmware hostap-utils"
PACKAGE_ARCH = "all"
-PR = "r3"
+PR = "r4"
SRC_URI = "file://hostap-fw-load"
# optional
DEPENDS += "alsa-lib"
-PR = "r2"
+RPROVIDES = "esound esd"
+
+PR = "r3"
SRC_URI = "http://0pointer.de/lennart/projects/pulseaudio/pulseaudio-${PV}.tar.gz"
-inherit autotools
+inherit autotools pkgconfig
EXTRA_OECONF = "\
--disable-lynx \
${sysconfdir}/pulse/client.conf \
"
+do_stage() {
+ autotools_stage_all
+}
+
+
python populate_packages_prepend() {
#bb.data.setVar('PKG_pulseaudio', 'pulseaudio', d)
}
PACKAGES =+ "qt-x11-plugins-imageformats qt-x11-plugins-sqldrivers qt-x11-plugins-designer \
- qt-x11-designer qt-x11-assistant qt-x11-qvfb qt-x11-qtconfig"
-FILES_qt-x11-plugins-imageformats = "${prefix}/plugins/imageformats"
-FILES_qt-x11-plugins-sqldrivers = "${prefix}/plugins/sqldrivers"
-FILES_qt-x11-plugins-designer = "${prefix}/plugins/designer"
+ qt-x11-designer qt-x11-assistant qt-x11-qvfb qt-x11-qtconfig qt-x11-plugins-debug"
+FILES_qt-x11-plugins-imageformats = "${prefix}/plugins/imageformats/*.so"
+FILES_qt-x11-plugins-sqldrivers = "${prefix}/plugins/sqldrivers/*.so"
+FILES_qt-x11-plugins-designer = "${prefix}/plugins/designer/*.so"
FILES_qt-x11-designer = "${bindir}/designer"
FILES_qt-x11-assistant = "${bindir}/assistant"
FILES_qt-x11-qvfb = "${bindir}/qvfb"
FILES_qt-x11-qtconfig = "${bindir}/qtconfig"
+FILES_qt-x11-plugins-debug += "${prefix}/plugins/*/.debug"
+
DEPENDS = "uicmoc3-native freetype virtual/libx11 xft libxext libxrender libxrandr libxcursor mysql mesa"
PROVIDES = "qt3x11"
-PR = "r1"
+PR = "r2"
SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-x11-free-${PV}.tar.bz2 \
file://configure.patch;patch=1 \
DEPENDS = "uicmoc3-native freetype virtual/libx11 xft libxext libxrender libxrandr libxcursor mysql mesa"
PROVIDES = "qt3x11"
-PR = "r0"
+PR = "r1"
SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-x11-free-${PV}.tar.bz2 \
file://configure.patch;patch=1 \
--- /dev/null
+# <type> <owner> <group> <mode> <path> <linksource>
+d quagga quagga 0755 /var/run/quagga none
RDEPENDS_${PN}-watchquagga = "${PN}"
# the "ip" command from busybox is not sufficient (flush by protocol flushes all routes)
RDEPENDS_${PN} += "iproute2"
-# These are required for vtysh
-RDEPENDS_${PN} += "ncurses readline"
# ${QUAGGASUBDIR} is deal with old versions. Set to "/attic" for old
# versions and leave it empty for recent versions.
file://quagga.init \
file://quagga.default \
file://watchquagga.init \
- file://watchquagga.default"
+ file://watchquagga.default \
+ file://volatiles.03_quagga"
inherit autotools update-rc.d
do_install () {
# Install init script and default settings
- install -m 0755 -d ${D}${sysconfdir}/default ${D}${sysconfdir}/init.d ${D}${sysconfdir}/quagga
+ install -m 0755 -d ${D}${sysconfdir}/default ${D}${sysconfdir}/init.d \
+ ${D}${sysconfdir}/quagga ${D}${sysconfdir}/default/volatiles
install -m 0644 ${WORKDIR}/quagga.default ${D}${sysconfdir}/default/quagga
install -m 0644 ${WORKDIR}/watchquagga.default ${D}${sysconfdir}/default/watchquagga
install -m 0755 ${WORKDIR}/quagga.init ${D}${sysconfdir}/init.d/quagga
install -m 0755 ${WORKDIR}/watchquagga.init ${D}${sysconfdir}/init.d/watchquagga
+ install -m 0644 ${WORKDIR}/volatiles.03_quagga ${D}${sysconfdir}/default/volatiles/volatiles.03_quagga
# Install quagga
oe_runmake install DESTDIR=${D} prefix=${prefix} \
libexecdir=${libexecdir}/quagga \
FILES_${PN}-watchquagga = "${libdir}/quagga/watchquagga ${sysconfdir}/default/watchquagga \
${sysconfdir}/init.d/watchquagga"
FILES_${PN} = "${bindir}/vtysh ${libdir}/quagga/zebra /usr/lib/libzebra*.so.* \
+ ${sysconfdir}/default/volatiles/volatiles.03_quagga \
${sysconfdir}/quagga \
${sysconfdir}/default/quagga ${sysconfdir}/init.d/quagga"
pkg_postinst_${PN} () {
grep -q quagga: /etc/group || addgroup quagga
grep -q quaggavty: /etc/group || addgroup quaggavty
- grep -q quagga: /etc/passwd || adduser --disabled-password --home=/var/run/quagga/ --ingroup quagga -g "Quagga routing suite" quagga
+ grep -q quagga: /etc/passwd || \
+ adduser --disabled-password --home=/var/run/quagga/ --system \
+ --ingroup quagga --no-create-home -g "Quagga routing suite" quagga
+ /etc/init.d/populate-volatile.sh update
}
# Stop apps before uninstall
-PR = "r3"
+PR = "r5"
require quagga.inc
-PR = "r0"
+PR = "r2"
require quagga.inc
DESCRIPTION = "Music composition program in the style of AMIGA Impulse Tracker"
-DEPENDS = "gtk+ libgnomeui audiofile esound-gpe alsa-lib"
+DEPENDS = "gtk+ libgnomeui audiofile esound alsa-lib"
LICENSE = "GPL"
SECTION = "x11/multimedia"
PR = "r1"
inherit gpe autotools
DESCRIPTION = "Starling audio player for GPE"
-DEPENDS = "gtk+ libgpewidget gstreamer gst-plugins-good gst-plugins-bad esound-gpe"
+DEPENDS = "gtk+ libgpewidget gstreamer gst-plugins-good gst-plugins-bad esound"
RDEPENDS = "esd \
gst-plugins \
gst-plugin-audio \
PACKAGES = "${PN}"
DESCRIPTION = "Meta-package for MythTV diskless frontend"
ALLOW_EMPTY = "1"
-PR = "r6"
+PR = "r13"
-RDEPENDS = "xserver-xorg mythtv lirc lirc-modules drm-module-via ttf-bitstream-vera fontconfig-utils setserial snes9x ntp mythfront-config gpe-dm mythfront-session bootlogd drm-module-drm"
+RDEPENDS = "xserver-xorg mythtv-frontend mythtv-filters mythtv-theme-g.a.n.t. mythtv-theme-default lirc lirc-modules ttf-bitstream-vera fontconfig-utils setserial snes9x ntp mythfront-config gpe-dm mythfront-session bootlogd font-cursor-misc font-misc-misc xf86-input-keyboard xf86-input-mouse"
+
+RDEPENDS_append_epia = " xorg-driver-via mesa-dri-driver-unichrome"
LICENSE = "MIT"
RDEPENDS_task-sdk-gpe := "\
libcontactsdb-dev \
- esound-gpe-dev \
+ esound-dev \
libeventdb-dev \
libgpepimc-dev \
libgpevtype-dev \
DESCRIPTION = "Tin is a powerful text mode news reader."
SECTION = "console/network"
DEPENDS = "ncurses libpcre"
-LICENSE = "GPL"
+LICENSE = "BSD"
inherit autotools
require tin.inc
-PR = "r0"
+PR = "r1"
SRC_URI = "ftp://ftp.tin.org/pub/news/clients/tin/v1.9/tin-${PV}.tar.gz \
file://m4.patch;patch=1"
DESCRIPTION = "Vino is an integrated VNC server for GNOME."
LICENSE = "GPLv2"
-DEPENDS = "libgnomeui libglade gnome-keyring esound-gpe dbus-glib libxml2 gnutls gnome-vfs"
+DEPENDS = "libgnomeui libglade gnome-keyring esound dbus-glib libxml2 gnutls gnome-vfs"
inherit gnome gconf
--- /dev/null
+Index: XaoS-3.2.3/configure.in
+===================================================================
+--- XaoS-3.2.3.orig/configure.in
++++ XaoS-3.2.3/configure.in
+@@ -130,25 +130,7 @@ if test -z "`${CC-cc} -mno-ieee-fp -c co
+ rm -f conftest*
+ ])])
+
+-AC_DEFUN(AC_PROG_AALIB_VER_OK,
+-[AC_CACHE_CHECK(whether aalib version >= 1.4, ac_aalib_ver_ok,
+-[echo '#include <aalib.h>
+-#include <aalib.h>
+-void f(){
+-#if AA_LIB_VERSIONCODE < 104000
+-#error aa_lib is probably buggy
+-/* I am using SuSE 7.3 and 8.0. Both contains version 1.3,
+- * however they report 102000 version code.
+- */
+-#endif
+-}' > conftest.c
+-if test -z "`${CC-cc} -c conftest.c 2>&1`"; then
+- ac_aalib_ver_ok=yes
+- else
+- ac_aalib_ver_ok=no
+- fi
+- rm -f conftest*
+-])])
++ac_aalib_ver_ok=yes
+
+ AC_DEFUN(PROG_CC_SWITCH1,
+ [AC_CACHE_CHECK(whether ${CC-cc} accepts -$1, ac_$2,
+@@ -478,7 +460,6 @@ AC_DEFUN(AC_AALIB, [
+ AC_CHECK_LIB(aa, aa_init)
+ if test "x$ac_cv_lib_aa_aa_init" = xyes; then
+ AC_MSG_RESULT(Found aalib on $1/aalib.h)
+- AC_PROG_AALIB_VER_OK
+ if test $ac_aalib_ver_ok = yes; then
+ #LIBS="$LIBS $2"
+ x11_linked=yes
+@@ -616,22 +597,22 @@ if test "$aa_driver_test" = yes; then
+ dnl Replace `main' with a function in -lm:
+ AC_CHECK_LIB(slang, SLsmg_init_smg)
+
+- AC_NCURSES(/usr/include, ncurses.h, , -I/usr/include/ncurses , "ncurses on /usr/include")
+- AC_NCURSES(/usr/include/ncurses, ncurses.h, , -I/usr/include/ncurses, "ncurses on /usr/include/ncurses")
+- AC_NCURSES(/usr/local/include, ncurses.h, ,-L/usr/local/lib, -I/usr/local/include, "ncurses on /usr/local")
+- AC_NCURSES(/usr/local/include/ncurses, ncurses.h, -L/usr/local/lib -L/usr/local/lib/ncurses, -I/usr/local/include/ncurses, "ncurses on /usr/local/include/ncurses")
++ AC_NCURSES(/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include, ncurses.h, , -I/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses , "ncurses on /home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include")
++ AC_NCURSES(/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses, ncurses.h, , -I/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses, "ncurses on /home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses")
++ AC_NCURSES(/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include, ncurses.h, ,-L/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/lib, -I/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include, "ncurses on /usr/local")
++ AC_NCURSES(/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses, ncurses.h, -L/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/lib -L/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/lib/ncurses, -I/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses, "ncurses on /home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses")
+
+- AC_NCURSES(/usr/local/include/ncurses, curses.h, -L/usr/local/lib, -I/usr/local/include/ncurses -DRENAMED_NCURSES, "renamed ncurses on /usr/local/.../ncurses")
++ AC_NCURSES(/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses, curses.h, -L/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/lib, -I/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses -DRENAMED_NCURSES, "renamed ncurses on /usr/local/.../ncurses")
+
+- AC_NCURSES(/usr/include/ncurses, curses.h, , -I/usr/include/ncurses -DRENAMED_NCURSES, "renamed ncurses on /usr/include/ncurses")
+- AC_CURSES(/usr/include, curses.h, , , "curses on /usr/include")
++ AC_NCURSES(/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses, curses.h, , -I/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses -DRENAMED_NCURSES, "renamed ncurses on /home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/ncurses")
++ AC_CURSES(/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include, curses.h, , , "curses on /home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include")
+
+ dnl
+ dnl We couldn't find ncurses, try SysV curses
+ dnl
+ if $search_ncurses
+ then
+- AC_EGREP_HEADER(init_color, /usr/include/curses.h,
++ AC_EGREP_HEADER(init_color, /home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include/curses.h,
+ AC_USE_SYSV_CURSES)
+ fi
+
+@@ -653,8 +634,8 @@ if test "$aa_driver_test" = yes; then
+ LIBS="$LIBS $X_EXTRA_LIBS $X_LIBS"
+ CFLAGS="$CFLAGS $X_CFLAGS"
+ fi
+- AC_AALIB(/usr/include, , )
+- AC_AALIB(/usr/local/include, -L/usr/local/lib, -I/usr/local/include)
++ AC_AALIB(/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include, , )
++ AC_AALIB(/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include, -L/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/lib, -I/home/papercrane/oe/oz354.build/tmp/staging/arm-linux/include)
+ for name in ../aalib-*.*
+ do
+ AC_AALIB($name,"-L$name","-I$name")
--- /dev/null
+Index: XaoS-3.2.3/src/util/xstdio.c
+===================================================================
+--- XaoS-3.2.3.orig/src/util/xstdio.c
++++ XaoS-3.2.3/src/util/xstdio.c
+@@ -1,3 +1,4 @@
++#define DATAPATH "/usr/share/XaoS"
+ #ifndef _plan9_
+ #include <string.h>
+ #if defined(__EMX__) || defined(__APPLE__)
+Index: XaoS-3.2.3/src/engine/formulas.c
+===================================================================
+--- XaoS-3.2.3.orig/src/engine/formulas.c
++++ XaoS-3.2.3/src/engine/formulas.c
+@@ -69,6 +69,8 @@
+ #endif
+
+
++#include "../include/complex.h"
++
+ CONST char *CONST incolorname[] = {
+ "0",
+ "zmag",
+Index: XaoS-3.2.3/src/engine/plane.c
+===================================================================
+--- XaoS-3.2.3.orig/src/engine/plane.c
++++ XaoS-3.2.3/src/engine/plane.c
+@@ -53,6 +53,8 @@ CONST char *CONST planename[] = {
+ };
+
+
++#include "../include/complex.h"
++
+ REGISTERS (3)
+ void recalculate (int plane, number_t * x1, number_t * y1)
+ {
+Index: XaoS-3.2.3/src/engine/fractal.c
+===================================================================
+--- XaoS-3.2.3.orig/src/engine/fractal.c
++++ XaoS-3.2.3/src/engine/fractal.c
+@@ -66,6 +66,8 @@
+ #endif
+ #include <xerror.h>
+
++#include "../include/complex.h"
++
+ struct symetryinfo2 cursymetry;
+ struct palette cpalette;
+ struct image cimage;
+Index: XaoS-3.2.3/src/engine/zoom.c
+===================================================================
+--- XaoS-3.2.3.orig/src/engine/zoom.c
++++ XaoS-3.2.3/src/engine/zoom.c
+@@ -69,6 +69,8 @@
+ #define gettext(STRING) STRING
+ #endif
+
++#include "../include/complex.h"
++
+ #define ASIZE 16
+ #define ALIGN(x) (((x)+ASIZE-1)&(~(ASIZE-1)))
+ static int nsymetrized;
--- /dev/null
+DESCRIPTION = "GNU XaoS, a realtime fractal generator zoomer"
+HOMEPAGE = "http://wmi.math.u-szeged.hu/xaos/doku.php"
+SECTION = "graphics"
+LICENSE = "GPLv2"
+DEPENDS = "aalib libx11 zlib libpng"
+RDEPENDS += "libxxf86dga"
+PR = "r0"
+
+SRC_URI = "http://easynews.dl.sourceforge.net/sourceforge/xaos/XaoS-3.2.3.tar.gz \
+ file://fix-build.patch;patch=1 \
+ file://fix-aalib-configure.patch;patch=1"
+
+S = "${WORKDIR}/XaoS-${PV}"
+
+inherit autotools
+
+EXTRA_OECONF = "--disable-nls"
+#--with-x --with-ncurses=${STAGING_INCDIR} --with-dga-driver=no --with-x11-driver=no --with-aa-driver=yes
+
+do_configure_prepend() {
+ sed -i 's~/usr/include~${STAGING_INCDIR}~' ${S}/configure.in
+ sed -i 's~/usr/local/include~${STAGING_INCDIR}~' ${S}/configure.in
+ sed -i 's~/usr/lib~${STAGING_LIBDIR}~' ${S}/configure.in
+ sed -i 's~/usr/local/lib~${STAGING_LIBDIR}~' ${S}/configure.in
+}
+
+FILES_${PN} = "${bindir} ${datadir}/XaoS/catalogs"
+
+CFLAGS = "-L${STAGING_LIBDIR}"
HOMEPAGE = "http://www.x.org"
SECTION = "x11/drivers"
LICENSE = "MIT-X"
+PR = "r1"
DEPENDS = "randrproto xorg-server xproto"
S = "${WORKDIR}/${XORG_PN}-${PV}"
FILES_${PN} += " ${libdir}/xorg/modules"
+FILES_${PN}-dbg += "${libdir}/xorg/modules/*/.debug"
inherit autotools pkgconfig
SECTION = "x11/base"
LICENSE = "MIT-X"
-RPROVIDES = "virtual/xserver"
+RPROVIDES_${PN} = "virtual/xserver"
PROVIDES = "virtual/xserver"
+MESA_VER ?= "6.5"
+
DEPENDS = "fontconfig freetype flex-native lbxutil kbproto \
xf86driproto drm glproto randrproto renderproto fixesproto damageproto \
xcmiscproto xextproto xproto xf86miscproto xf86vidmodeproto xf86bigfontproto \
scrnsaverproto bigreqsproto resourceproto fontsproto inputproto \
xf86dgaproto videoproto compositeproto trapproto recordproto dmxproto \
resourceproto xineramaproto xtrans evieext libxkbfile libxfont libxau \
-libfontenc libxdmcp libxxf86vm libxaw libxmu libxt libxpm libxext virtual/libx11 \
+libfontenc libxdmcp libxxf86vm libxaw libxmu libxt libxpm libxext libx11 \
libxkbui libxxf86misc libxi libdmx libxtst libxres mesa mkfontscale-native"
-RDEPENDS="rgb"
+RDEPENDS_${PN} = "rgb"
XORG_PN = "xorg-server"
SRC_URI = "${XORG_MIRROR}/${@bb.data.getVar('PV', d, 1)[0:7]}/src/xserver/${XORG_PN}-${PV}.tar.bz2 \
+ ${SOURCEFORGE_MIRROR}/mesa3d/MesaLib-${MESA_VER}.tar.bz2 \
file://xorg.conf"
S = "${WORKDIR}/${XORG_PN}-${PV}"
inherit autotools pkgconfig
-
-EXTRA_OECONF = "--disable-builddocs"
+EXTRA_OECONF = "--disable-builddocs --with-mesa-source=${WORKDIR}/Mesa-${MESA_VER}"
PACKAGES =+ "${PN}-xprint ${PN}-xvfb ${PN}-utils ${PN}-xnest ${PN}-dmx"
--- /dev/null
+--- kmode.c 2006-05-03 19:48:42.000000000 +0200
++++ xserver/hw/kdrive/src/kmode.c 2006-05-03 19:50:43.000000000 +0200
+@@ -32,6 +32,31 @@
+ /* H V Hz KHz */
+ /* FP BP BLANK POLARITY */
+
++ /* Treo 650 */
++
++ { 320, 320, 64, 16256,
++ 17, 12, 32, KdSyncNegative,
++ 1, 11, 14, KdSyncNegative,
++ },
++
++ { 320, 320, 64, 0,
++ 0, 0, 0, KdSyncNegative,
++ 0, 0, 0, KdSyncNegative,
++ },
++
++ /* LifeDrive/T3/TX modes */
++
++ { 320, 480, 64, 16256,
++ 17, 12, 32, KdSyncNegative,
++ 1, 11, 14, KdSyncNegative,
++ },
++
++ { 480, 320, 64, 0,
++ 0, 0, 0, KdSyncNegative,
++ 0, 0, 0, KdSyncNegative,
++ },
++
++
+ /* IPAQ modeline:
+ *
+ * Modeline "320x240" 5.7222 320 337 340 352 240 241 244 254"
LICENSE = "MIT"
DEPENDS = "tslib virtual/libsdl xproto libxdmcp xextproto xtrans libxau virtual/libx11 libxext libxrandr fixesproto damageproto libxfont resourceproto compositeproto xcalibrateext recordproto videoproto scrnsaverproto"
-PR = "r5"
+PR = "r7"
PROVIDES = "virtual/xserver"
RPROVIDES = "virtual/xserver"
-PACKAGES =+ "xserver-kdrive-fbdev xserver-kdrive-sdl xserver-kdrive-fake xserver-kdrive-xephyr xserver-kdrive-epson xserver-kdrive-w100"
+PACKAGES =+ "xserver-kdrive-fbdev \
+ xserver-kdrive-sdl \
+ xserver-kdrive-fake \
+ xserver-kdrive-xephyr \
+ xserver-kdrive-epson \
+ xserver-kdrive-w100 \
+ xserver-kdrive-ati \
+ xserver-kdrive-chips \
+ xserver-kdrive-i810 \
+ xserver-kdrive-mach64 \
+ xserver-kdrive-mga \
+ xserver-kdrive-neomagic \
+ xserver-kdrive-nvidia \
+ xserver-kdrive-pm2 \
+ xserver-kdrive-r128 \
+ xserver-kdrive-smi \
+ xserver-kdrive-vesa \
+ xserver-kdrive-via \
+ "
+
SECTION = "x11/base"
DESCRIPTION = "X server from freedesktop.org"
DESCRIPTION_xserver-kdrive-fbdev = "X server from freedesktop.org, supporting generic framebuffer devices"
DESCRIPTION_xserver-kdrive-epson = "X server from freedesktop.org, supporting Epson S1D13806 devices"
DESCRIPTION_xserver-kdrive-sdl = "X server from freedesktop.org, SDL version"
DESCRIPTION_xserver-kdrive-w100 = "X server from freedesktop.org, supporting the ATI imageon w100 chipset"
+DESCRIPTION_xserver-kdrive-ati = "X server from freedesktop.org, supporting ATI devices"
+DESCRIPTION_xserver-kdrive-chips = "X server from freedesktop.org, supporting Chips chipsets"
+DESCRIPTION_xserver-kdrive-i810 = "X server from freedesktop.org, supporting Intel chipsets"
+DESCRIPTION_xserver-kdrive-mach64 = "X server from freedesktop.org, supporting mach64 chipsets"
+DESCRIPTION_xserver-kdrive-mga = "X server from freedesktop.org, supporting mga chipsets"
+DESCRIPTION_xserver-kdrive-neomagic = "X server from freedesktop.org, supporting neomagic chipsets"
+DESCRIPTION_xserver-kdrive-nvidia = "X server from freedesktop.org, supporting nvidia devices"
+DESCRIPTION_xserver-kdrive-pm2 = "X server from freedesktop.org, supporting Permedia2 chipsets"
+DESCRIPTION_xserver-kdrive-r128 = "X server from freedesktop.org, supporting rage128 chipsets"
+DESCRIPTION_xserver-kdrive-smi = "X server from freedesktop.org, supporting Silicon Motion devices"
+DESCRIPTION_xserver-kdrive-vesa = "X server from freedesktop.org, supporting any card with a VESA, VGA or even EGA BIOS. x86 hardware only"
+DESCRIPTION_xserver-kdrive-via = "X server from freedesktop.org, supporting VIA chipsets"
FILES_${PN} += "${libdir}/xserver/SecurityPolicy"
FILES_xserver-kdrive-epson = "${bindir}/Xepson"
FILES_xserver-kdrive-sdl = "${bindir}/Xsdl"
FILES_xserver-kdrive-w100 = "${bindir}/Xw100"
+FILES_xserver-kdrive-ati = "${bindir}/Xati"
+FILES_xserver-kdrive-chips = "${bindir}/Xchips"
+FILES_xserver-kdrive-i810 = "${bindir}/Xi810"
+FILES_xserver-kdrive-mach64 = "${bindir}/Xmach64"
+FILES_xserver-kdrive-mga = "${bindir}/Xmga"
+FILES_xserver-kdrive-neomagic = "${bindir}/Xneomagic"
+FILES_xserver-kdrive-nvidia = "${bindir}/Xnvidia"
+FILES_xserver-kdrive-pm2 = "${bindir}/Xpm2"
+FILES_xserver-kdrive-r128 = "${bindir}/Xr128"
+FILES_xserver-kdrive-smi = "${bindir}/Xsmi"
+FILES_xserver-kdrive-vesa = "${bindir}/Xvesa"
+FILES_xserver-kdrive-via = "${bindir}/Xvia"
RDEPENDS_xserver-kdrive-fbdev = "${PN}"
RDEPENDS_xserver-kdrive-fake = "${PN}"
RDEPENDS_xserver-kdrive-epson = "${PN}"
RDEPENDS_xserver-kdrive-sdl = "${PN}"
RDEPENDS_xserver-kdrive-w100 = "${PN}"
+RDEPENDS_xserver-kdrive-ati = "${PN}"
+RDEPENDS_xserver-kdrive-chips = "${PN}"
+RDEPENDS_xserver-kdrive-i810 = "${PN}"
+RDEPENDS_xserver-kdrive-mach64 = "${PN}"
+RDEPENDS_xserver-kdrive-mga = "${PN}"
+RDEPENDS_xserver-kdrive-neomagic = "${PN}"
+RDEPENDS_xserver-kdrive-nvidia = "${PN}"
+RDEPENDS_xserver-kdrive-pm2 = "${PN}"
+RDEPENDS_xserver-kdrive-r128 = "${PN}"
+RDEPENDS_xserver-kdrive-smi = "${PN}"
+RDEPENDS_xserver-kdrive-vesa = "${PN}"
+RDEPENDS_xserver-kdrive-via = "${PN}"
SRC_URI = "http://ftp.x.org/pub/X11R7.1/src/xserver/xorg-server-X11R7.1-1.1.0.tar.bz2 \
file://kmode.patch;patch=1 \
file://disable-xf86-dga-xorgcfg.patch;patch=1 \
file://w100.patch;patch=1 \
file://enable-tslib.patch;patch=1 \
- file://xcalibrate.patch;patch=1"
+ file://xcalibrate.patch;patch=1 \
+ file://kmode-palm.patch;patch=1"
SRC_URI_append_mnci = " file://onlyfb.patch;patch=1"
SRC_URI_append_poodle = " file://xserver-kdrive-poodle.patch;patch=1"
PACKAGE_ARCH_poodle = "poodle"
+PACKAGE_ARCH_palmtx = "palmtx"
+PACKAGE_ARCH_palmld = "palmld"
+PACKAGE_ARCH_palmz72 = "palmz72"
S = "${WORKDIR}/xorg-server-X11R7.1-1.1.0"
require xorg-xserver-common.inc
-PR = "r1"
+PR = "r3"
#DESCRIPTION = ""
SRC_URI += "file://drmfix.patch;patch=1"
-PR = "r1"
+PR = "r3"
EXTRA_OECONF += " ac_cv_file__usr_share_X11_sgml_defs_ent=no "
projects / vuplus_openembedded / commitdiff