linux-ezx: add 2.6.24

diff --git a/packages/linux/linux-ezx-2.6.24/.mtn2git_empty b/packages/linux/linux-ezx-2.6.24/.mtn2git_empty
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/packages/linux/linux-ezx-2.6.24/a1200/.mtn2git_empty b/packages/linux/linux-ezx-2.6.24/a1200/.mtn2git_empty
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/packages/linux/linux-ezx-2.6.24/a1200/defconfig b/packages/linux/linux-ezx-2.6.24/a1200/defconfig
new file mode 100755 (executable)
index 0000000..4649d7b
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/a1200/defconfig
@@ -0,0 +1,1208 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23.1
+# Wed Oct 24 18:03:17 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+CONFIG_PXA_EZX=y
+# CONFIG_PXA_EZX_E680 is not set
+# CONFIG_PXA_EZX_A780 is not set
+# CONFIG_PXA_EZX_E2 is not set
+CONFIG_PXA_EZX_A1200=y
+# CONFIG_PXA_EZX_E6 is not set
+# CONFIG_EZX_BP is not set
+CONFIG_EZX_PCAP=y
+CONFIG_EZX_EOC=y
+# CONFIG_EZX_EMU is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_SUSPEND is not set
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+CONFIG_MTD_EZX=y
+# CONFIG_MTD_EZX_A780 is not set
+# CONFIG_MTD_EZX_A780_ALTERNATE is not set
+CONFIG_MTD_EZX_A1200=y
+# CONFIG_MTD_EZX_E2 is not set
+# CONFIG_MTD_EZX_E6 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_EZX is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA2XX_SOC_SSP=y
+CONFIG_SND_PXA2XX_SOC_EZX=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_PCAP2=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

diff --git a/packages/linux/linux-ezx-2.6.24/a780/.mtn2git_empty b/packages/linux/linux-ezx-2.6.24/a780/.mtn2git_empty
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/packages/linux/linux-ezx-2.6.24/a780/defconfig b/packages/linux/linux-ezx-2.6.24/a780/defconfig
new file mode 100755 (executable)
index 0000000..b10c2e9
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/a780/defconfig
@@ -0,0 +1,1502 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Sun Jan 27 15:19:17 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA_EZX=y
+# CONFIG_PXA_EZX_E680 is not set
+CONFIG_PXA_EZX_A780=y
+# CONFIG_PXA_EZX_E2 is not set
+# CONFIG_PXA_EZX_A1200 is not set
+# CONFIG_PXA_EZX_E6 is not set
+CONFIG_EZX_BP=y
+CONFIG_EZX_PCAP=y
+# CONFIG_EZX_EOC is not set
+CONFIG_EZX_EMU=y
+CONFIG_EZX_EMU_USB=y
+# CONFIG_EZX_EMU_UART is not set
+# CONFIG_EZX_EMU_NOTHING is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1  root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0   debug mem=32M@0xA0000000 mem=16M@0xAC000000"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_SUSPEND is not set
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RCSIMPLE=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+CONFIG_MTD_EZX=y
+CONFIG_MTD_EZX_A780=y
+# CONFIG_MTD_EZX_A780_ALTERNATE is not set
+# CONFIG_MTD_EZX_A1200 is not set
+# CONFIG_MTD_EZX_E2 is not set
+# CONFIG_MTD_EZX_E6 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_TS0710_MUX=y
+CONFIG_TS0710_MUX_USB=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_EZX=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA2XX_SOC_SSP=y
+CONFIG_SND_PXA2XX_SOC_EZX=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_PCAP2=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_A780=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ABLKCIPHER=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

diff --git a/packages/linux/linux-ezx-2.6.24/e680/.mtn2git_empty b/packages/linux/linux-ezx-2.6.24/e680/.mtn2git_empty
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/packages/linux/linux-ezx-2.6.24/e680/defconfig b/packages/linux/linux-ezx-2.6.24/e680/defconfig
new file mode 100755 (executable)
index 0000000..9a30ce6
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/e680/defconfig
@@ -0,0 +1,1584 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21.4
+# Sun Sep  9 16:51:47 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+CONFIG_PXA_EZX=y
+CONFIG_PXA_EZX_E680=y
+# CONFIG_PXA_EZX_A780 is not set
+# CONFIG_PXA_EZX_E2 is not set
+# CONFIG_PXA_EZX_A1200 is not set
+# CONFIG_PXA_EZX_E6 is not set
+CONFIG_EZX_BP=y
+CONFIG_EZX_PCAP=y
+CONFIG_EZX_EMU=y
+CONFIG_EZX_EMU_USB=y
+# CONFIG_EZX_EMU_UART is not set
+# CONFIG_EZX_EMU_NOTHING is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1  root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0   debug mem=32M@0xA0000000 mem=16M@0xAC000000"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+# CONFIG_IPV6_ROUTE_INFO is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+CONFIG_MTD_EZX=y
+CONFIG_MTD_EZX_A780=y
+# CONFIG_MTD_EZX_A780_ALTERNATE is not set
+# CONFIG_MTD_EZX_E2 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+CONFIG_NET_WIRELESS_RTNETLINK=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_ZD1211RW is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_SHAPER=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_TS0710_MUX=y
+CONFIG_TS0710_MUX_USB=y
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_E680 is not set
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+
+#
+# V4L USB devices
+#
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_USB_DSBR is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_EZX=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DUMMY=m
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# SoC audio support
+#
+CONFIG_SND_SOC=y
+
+#
+# SoC Platforms
+#
+
+#
+# SoC Audio for the Atmel AT91
+#
+
+#
+# SoC Audio for the Intel PXA2xx
+#
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA2XX_SOC_SSP=y
+CONFIG_SND_PXA2XX_SOC_EZX=y
+CONFIG_SND_SOC_PCAP2=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=m
+CONFIG_RTC_INTF_PROC=m
+CONFIG_RTC_INTF_DEV=m
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=n
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y

diff --git a/packages/linux/linux-ezx-2.6.24/patches/.mtn2git_empty b/packages/linux/linux-ezx-2.6.24/patches/.mtn2git_empty
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/packages/linux/linux-ezx-2.6.24/patches/Makefile.OpenEZX b/packages/linux/linux-ezx-2.6.24/patches/Makefile.OpenEZX
new file mode 100644 (file)
index 0000000..e7e9115
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/Makefile.OpenEZX
@@ -0,0 +1,77 @@
+# Makefile used to build binary images of OpenEZX kernels
+#
+# If you are currently in the linux kernel toplevel dir,
+# you can call this Makefile with:
+#   $ make -f path_to/Makefile.OpenEZX
+#
+# Note that you can set the CROSS_COMPILE and QUILT_PATCHES variable
+# in your environment.
+#
+
+PHONES = a780 e680 a1200 e6 e2
+
+CROSS_COMPILE ?= /home/wyrm/ezx/dev/cross/bin/arm-angstrom-linux-gnueabi-
+QUILT_PATCHES ?= patches
+
+LV ?= ezxdev# replace LOCALVERSION string
+J ?= 2         # simultaneous jobs
+SIG ?= 0       # BOOL sign md5sums file
+
+DATE = $(shell date +%Y%m%d)
+DEPLOY_SERVER ?= people.openezx.org
+DEPLOY_DIR ?= public_html/images/$(DATE)/
+
+all: $(foreach p, $(PHONES), zImage-$(p) modules-$(p).tar.gz)
+
+zImages: $(foreach p, $(PHONES), zImage-$(p))
+
+modules: $(foreach p, $(PHONES), modules-$(p).tar.gz)
+
+config: $(foreach p, $(PHONES), config-$(p))
+
+config-%: $(QUILT_PATCHES)/defconfig-%
+       cp $<  .config
+       make ARCH=arm oldconfig
+       cp .config $<
+
+deploy: release
+       ssh $(DEPLOY_SERVER) \
+               mkdir -p $(DEPLOY_DIR)
+       scp ezxrelease-$(DATE).tar $(DEPLOY_SERVER):$(DEPLOY_DIR)
+       ssh $(DEPLOY_SERVER) \
+               cd $(DEPLOY_DIR)\; \
+               tar -xf ezxrelease-$(DATE).tar\; \
+               rm -f ezxrelease-$(DATE).tar
+
+release: $(foreach p, $(PHONES), tag-$(p))
+       cp md5sums.tmp md5sums
+       test "$(SIG)" = "1" && \
+               cat md5sums.tmp | gpg --clearsign > md5sums \
+       ; echo
+       tar -rf ezxrelease.tar md5sums
+       rm -f md5sums.tmp md5sums
+       mv ezxrelease.tar ezxrelease-$(DATE).tar
+
+tag-%: zImage-% modules-%.tar.gz
+       p=$(patsubst tag-%,%,$@) && \
+       tag=$(shell cat include/config/kernel.release)-$(DATE) && \
+       mv zImage-$$p zImage-$$tag-$$p && \
+       mv modules-$$p.tar.gz modules-$$tag-$$p.tar.gz && \
+       tar -rf ezxrelease.tar zImage-$$tag-$$p modules-$$tag-$$p.tar.gz && \
+       md5sum zImage-$$tag-$$p modules-$$tag-$$p.tar.gz >> md5sums.tmp && \
+       rm -f zImage-$$tag-$$p modules-$$tag-$$p.tar.gz
+
+zImage-%: $(QUILT_PATCHES)/defconfig-%
+       cat $< | sed 's/LOCALVERSION=".*"$$/LOCALVERSION="-$(LV)"/' > .config
+       make -j$(J) ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) zImage
+       mv arch/arm/boot/zImage $@
+
+modules-%.tar.gz: $(QUILT_PATCHES)/defconfig-%
+       cat $< | sed 's/LOCALVERSION=".*"$$/LOCALVERSION="-$(LV)"/' > .config
+       -find . -name "*.ko" -print0 | xargs -r0 rm
+       mkdir -p Makefile.OpenEZX-tmp/$@
+       make -j$(J) ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) modules
+       make -j1 ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) \
+               INSTALL_MOD_PATH=Makefile.OpenEZX-tmp/$@ modules_install
+       tar -C Makefile.OpenEZX-tmp/$@ -czf $@ .
+       rm -rf Makefile.OpenEZX-tmp/

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a1200-eoc.patch b/packages/linux/linux-ezx-2.6.24/patches/a1200-eoc.patch
new file mode 100644 (file)
index 0000000..d69c6ec
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a1200-eoc.patch
@@ -0,0 +1,20 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a1200.c    2007-11-24 20:12:08.000000000 -0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c 2007-11-24 20:12:24.000000000 -0200
+@@ -186,8 +186,15 @@
+       },
+ };
+ 
++
++struct platform_device a1200_eoc_device = {
++      .name           = "ezx-eoc",
++      .id             = -1,
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &a1200_pcap_device,
++      &a1200_eoc_device,
+ };
+ 
+ static void __init a1200_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a1200-flip.patch b/packages/linux/linux-ezx-2.6.24/patches/a1200-flip.patch
new file mode 100644 (file)
index 0000000..cc36d36
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a1200-flip.patch
@@ -0,0 +1,47 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a1200.c    2007-11-24 20:12:42.000000000 -0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c 2007-11-24 20:12:50.000000000 -0200
+@@ -16,6 +16,7 @@
+ #include <linux/mmc/host.h>
+ #include <linux/irq.h>
+ #include <linux/input.h>
++#include <linux/gpio_keys.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -275,11 +276,34 @@
+       .num_resources  = ARRAY_SIZE(pcap_ts_resources),
+       .resource       = pcap_ts_resources,
+ };
++/* Flip */
++#undef GPIO_FLIP_PIN
++#define GPIO_FLIP_PIN 15 /* FIXME */
++static struct gpio_keys_button a1200flip_buttons[] = {
++      [0] = {
++              .code           = KEY_SLEEP,
++              .gpio           = GPIO_FLIP_PIN,
++              .desc           = "A1200 flip",
++      },
++};
++
++static struct gpio_keys_platform_data a1200flip_platform_data = {
++      .buttons        = a1200flip_buttons,
++      .nbuttons       = 1,
++};
++static struct platform_device a1200flip_device = {
++      .name           = "gpio-keys",
++      .id             = -1,
++      .dev            = {
++              .platform_data  = &a1200flip_platform_data,
++      },
++};
+ 
+ static struct platform_device *devices[] __initdata = {
+       &a1200_pcap_device,
+       &a1200_eoc_device,
+       &pcap_ts_device,
++      &a1200flip_device,
+ };
+ 
+ static void __init a1200_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a1200-kbd.patch b/packages/linux/linux-ezx-2.6.24/patches/a1200-kbd.patch
new file mode 100644 (file)
index 0000000..1e1a68c
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a1200-kbd.patch
@@ -0,0 +1,98 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a1200.c    2007-11-24 20:12:24.000000000 -0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c 2007-11-24 20:12:35.000000000 -0200
+@@ -15,6 +15,7 @@
+ #include <linux/fb.h>
+ #include <linux/mmc/host.h>
+ #include <linux/irq.h>
++#include <linux/input.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -23,11 +24,13 @@
+ #include <asm/arch/ezx.h>
+ #include <asm/arch/ezx-pcap.h>
+ #include <asm/arch/mmc.h>
++#include <asm/arch/kbd.h>
+ 
+ #include "generic.h"
+ 
+ extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
+ extern void ezx_backlight_power(int);
++extern void __init pxa_set_kbd_info(struct pxakbd_platform_data *);
+ 
+ #ifdef CONFIG_EZX_PCAP
+ extern int ezx_pcap_mmcsd_power(int);
+@@ -192,6 +195,63 @@
+       .id             = -1,
+ };
+ 
++/* Keypad */
++static unsigned char a1200_keycode[] = {
++      /* row 0 */
++      KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
++      /* row 1 */
++      KEY_RIGHT, KEY_DOWN, KEY_KPENTER, KEY_UP, KEY_LEFT,
++      /* row 2 */
++      KEY_PAGEDOWN, KEY_CAMERA, KEY_RECORD, KEY_HOME, KEY_PAGEUP,
++      /* row 3 */
++      KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
++      /* row 4 */
++      KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED,
++      /* row 5 */
++      KEY_RESERVED, KEY_RESERVED, KEY_MENU, KEY_RESERVED, KEY_RESERVED,
++};
++/*
++static unsigned char a1200_direct_keycode[] = {
++      KEY_CAMERA,
++};
++*/
++
++static int a1200_kbd_init(void)
++{
++      pxa_gpio_mode(100 | GPIO_ALT_FN_1_IN); /* KP_MKIN<0> */
++      pxa_gpio_mode(101 | GPIO_ALT_FN_1_IN); /* KP_MKIN<1> */
++      pxa_gpio_mode(102 | GPIO_ALT_FN_1_IN); /* KP_MKIN<2> */
++      pxa_gpio_mode(97  | GPIO_ALT_FN_3_IN); /* KP_MKIN<3> */
++      pxa_gpio_mode(98  | GPIO_ALT_FN_3_IN); /* KP_MKIN<4> */
++      pxa_gpio_mode(103 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<0> */
++      pxa_gpio_mode(104 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<1> */
++      pxa_gpio_mode(105 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<2> */
++      pxa_gpio_mode(106 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<3> */
++      pxa_gpio_mode(107 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<4> */
++      pxa_gpio_mode(108 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<5> */
++
++      PKWR   = 0xEC000;
++      PGSR3 |= 0x1F80;
++      return 0;
++}
++
++static struct pxakbd_platform_data a1200_kbd_platform_data = {
++      .init           = &a1200_kbd_init,
++      .scan_interval  = HZ/40,
++      .matrix         = {
++              .keycode = a1200_keycode,
++              .cols   = 6,
++              .rows   = 5,
++      },
++/*
++      .direct         = {
++              .keycode = a1200_direct_keycode,
++              .num    = 1,
++      },
++*/
++};
++
++
+ static struct platform_device *devices[] __initdata = {
+       &a1200_pcap_device,
+       &a1200_eoc_device,
+@@ -201,6 +261,7 @@
+ {
+       set_pxa_fb_info(&a1200_fb_info);
+       pxa_set_mci_info(&a1200_mci_platform_data);
++      pxa_set_kbd_info(&a1200_kbd_platform_data);
+ 
+       platform_add_devices(devices, ARRAY_SIZE(devices));
+ }

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a1200-mci.patch b/packages/linux/linux-ezx-2.6.24/patches/a1200-mci.patch
new file mode 100644 (file)
index 0000000..caa897e
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a1200-mci.patch
@@ -0,0 +1,124 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a1200.c
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c
+@@ -13,6 +13,8 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/fb.h>
++#include <linux/mmc/host.h>
++#include <linux/irq.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -20,12 +22,102 @@
+ #include <asm/arch/pxafb.h>
+ #include <asm/arch/ezx.h>
+ #include <asm/arch/ezx-pcap.h>
++#include <asm/arch/mmc.h>
+ 
+ #include "generic.h"
+ 
+ extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
+ extern void ezx_backlight_power(int);
+ 
++#ifdef CONFIG_EZX_PCAP
++extern int ezx_pcap_mmcsd_power(int);
++extern void ezx_pcap_mmcsd_voltage(u_int32_t);
++#else
++#define ezx_pcap_mmcsd_voltage(x) {}
++#define ezx_pcap_mmcsd_power(x) {}
++#endif
++
++static struct pxamci_platform_data a1200_mci_platform_data;
++
++static u_int8_t mmc_voltage[] = {
++      [ilog2(MMC_VDD_165_195)] = 6,
++      [ilog2(MMC_VDD_20_21)] = 7,
++      [ilog2(MMC_VDD_21_22)] = 8,
++      [ilog2(MMC_VDD_22_23)] = 8,
++      [ilog2(MMC_VDD_23_24)] = 9,
++      [ilog2(MMC_VDD_24_25)] = 9,
++      [ilog2(MMC_VDD_25_26)] = 10,
++      [ilog2(MMC_VDD_26_27)] = 10,
++      [ilog2(MMC_VDD_27_28)] = 11,
++      [ilog2(MMC_VDD_28_29)] = 11,
++      [ilog2(MMC_VDD_29_30)] = 12,
++      [ilog2(MMC_VDD_30_31)] = 12,
++      [ilog2(MMC_VDD_31_32)] = 13,
++      [ilog2(MMC_VDD_32_33)] = 13,
++      [ilog2(MMC_VDD_33_34)] = 14,
++      [ilog2(MMC_VDD_34_35)] = 14,
++      [ilog2(MMC_VDD_35_36)] = 15,
++};
++
++static int a1200_mci_init(struct device *dev,
++                       irqreturn_t (*ezx_detect_int)(int, void *),
++                       void *data)
++{
++       int err;
++
++       /* Setup GPIO for PXA27x MMC/SD controller */
++       pxa_gpio_mode(GPIO32_MMCCLK_MD);
++       pxa_gpio_mode(GPIO112_MMCCMD_MD);
++       pxa_gpio_mode(GPIO92_MMCDAT0_MD);
++       pxa_gpio_mode(GPIO109_MMCDAT1_MD);
++       pxa_gpio_mode(GPIO110_MMCDAT2_MD);
++       pxa_gpio_mode(GPIO111_MMCDAT3_MD);
++
++       ezx_pcap_mmcsd_power(1);
++
++       a1200_mci_platform_data.detect_delay = msecs_to_jiffies(250);
++
++       err = request_irq(0x49, ezx_detect_int, IRQF_DISABLED,
++                       "MMC card detect", data);
++       if (err) {
++               printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request "
++                       "MMC card detect IRQ\n");
++               return -1;
++       }
++
++       set_irq_type(0x0b, IRQT_BOTHEDGE);
++
++       return 0;
++}
++
++static void a1200_mci_setpower(struct device *dev, unsigned int vdd)
++{
++      struct pxamci_platform_data* p_d = dev->platform_data;
++
++      if (( 1 << vdd) & p_d->ocr_mask)
++              ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]);
++
++      ezx_pcap_mmcsd_power(1);
++}
++
++static void a1200_mci_exit(struct device *dev, void *data)
++{
++      ezx_pcap_mmcsd_power(0);
++      free_irq(0x49, data);
++}
++
++static struct pxamci_platform_data a1200_mci_platform_data = {
++      .ocr_mask       = MMC_VDD_165_195|MMC_VDD_20_21|MMC_VDD_21_22
++                        |MMC_VDD_22_23|MMC_VDD_23_24|MMC_VDD_24_25
++                        |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28
++                        |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31
++                        |MMC_VDD_31_32|MMC_VDD_32_33|MMC_VDD_33_34
++                        |MMC_VDD_34_35|MMC_VDD_35_36,
++      .init           = a1200_mci_init,
++      .setpower       = a1200_mci_setpower,
++      .exit           = a1200_mci_exit,
++};
++
+ static struct pxafb_mode_info mode_a1200 = {
+       .pixclock = 192308,
+       .xres = 240,
+@@ -101,6 +193,7 @@
+ static void __init a1200_init(void)
+ {
+       set_pxa_fb_info(&a1200_fb_info);
++      pxa_set_mci_info(&a1200_mci_platform_data);
+ 
+       platform_add_devices(devices, ARRAY_SIZE(devices));
+ }

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a1200-pcap.patch b/packages/linux/linux-ezx-2.6.24/patches/a1200-pcap.patch
new file mode 100644 (file)
index 0000000..c725886
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a1200-pcap.patch
@@ -0,0 +1,66 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a1200.c
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c
+@@ -19,6 +19,7 @@
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/pxafb.h>
+ #include <asm/arch/ezx.h>
++#include <asm/arch/ezx-pcap.h>
+ 
+ #include "generic.h"
+ 
+@@ -48,7 +49,53 @@
+       .pxafb_lcd_power = &ezx_lcd_power,
+ };
+ 
++/* PCAP */
++static int a1200_pcap_init(void)
++{
++      /* FIXME */
++      ezx_pcap_write(PCAP_REG_INT_SEL, 0x0); /* wrong */
++      ezx_pcap_write(PCAP_REG_SWCTRL, 0x2ee6); /* partially wrong */
++      ezx_pcap_write(PCAP_REG_VREG1, 0x15778e3); /* wrong */
++      ezx_pcap_write(PCAP_REG_VREG2, 0x810234); /* partially wrong */
++      ezx_pcap_write(PCAP_REG_AUXVREG, 0x1024bec); /* wrong */
++      ezx_pcap_write(PCAP_REG_PWR, 0x94108); /* partially wrong */
++      ezx_pcap_write(PCAP_REG_AUXVREG_MASK, 0x214d48); /* wrong */
++      ezx_pcap_write(PCAP_REG_BUSCTRL, 0x2a0); /* wrong */
++      ezx_pcap_write(PCAP_REG_LOWPWR, 0x1d9610c);
++      ezx_pcap_write(PCAP_REG_PERIPH, 0x0); /* wrong */
++      ezx_pcap_write(PCAP_REG_GP, 0x107); /* probably unnecessary */
++
++      return 0;
++}
++
++static struct pcap_platform_data a1200_pcap_platform_data = {
++      .port           = 1,
++      .cs             = GPIO_SPI_CE,
++      .flags          = PCAP_CS_AH | PCAP_MCI_TF,
++      .clk            = 1,
++      .init           = a1200_pcap_init,
++};
++
++static struct resource a1200_pcap_resources[] = {
++      [0] = {
++              .start          = IRQ_GPIO1,
++              .end            = IRQ_GPIO1,
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++struct platform_device a1200_pcap_device = {
++      .name           = "ezx-pcap",
++      .id             = -1,
++      .num_resources  = ARRAY_SIZE(a1200_pcap_resources),
++      .resource       = a1200_pcap_resources,
++      .dev            = {
++              .platform_data = &a1200_pcap_platform_data,
++      },
++};
++
+ static struct platform_device *devices[] __initdata = {
++      &a1200_pcap_device,
+ };
+ 
+ static void __init a1200_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a1200-ts.patch b/packages/linux/linux-ezx-2.6.24/patches/a1200-ts.patch
new file mode 100644 (file)
index 0000000..66409d1
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a1200-ts.patch
@@ -0,0 +1,39 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a1200.c    2007-11-24 20:12:35.000000000 -0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c 2007-11-24 20:12:42.000000000 -0200
+@@ -252,9 +252,34 @@
+ };
+ 
+ 
++/* PCAP_TS */
++struct resource pcap_ts_resources[] = {
++      [0] = {
++              .start          = EZX_IRQ_ADCDONE,
++              .end            = EZX_IRQ_ADCDONE,
++              .flags          = IORESOURCE_IRQ,
++      },
++      [1] = {
++              .start          = EZX_IRQ_TS,
++              .end            = EZX_IRQ_TS,
++              .flags          = IORESOURCE_IRQ,
++      }
++};
++
++struct platform_device pcap_ts_device = {
++      .name           = "pcap-ts",
++      .id             = -1,
++      .dev            = {
++              .parent = &a1200_pcap_device.dev,
++      },
++      .num_resources  = ARRAY_SIZE(pcap_ts_resources),
++      .resource       = pcap_ts_resources,
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &a1200_pcap_device,
+       &a1200_eoc_device,
++      &pcap_ts_device,
+ };
+ 
+ static void __init a1200_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a780-emu.patch b/packages/linux/linux-ezx-2.6.24/patches/a780-emu.patch
new file mode 100644 (file)
index 0000000..ae92373
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a780-emu.patch
@@ -0,0 +1,38 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c     2007-10-23 23:03:48.000000000 +0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c  2007-10-23 23:04:03.000000000 +0200
+@@ -212,8 +212,33 @@
+       },
+ };
+ 
++/* EMU */
++static struct resource a780_emu_resources[] = {
++      [0] = {
++              .start          = EZX_IRQ_USB4V,
++              .end            = EZX_IRQ_USB4V,
++              .flags          = IORESOURCE_IRQ,
++      },
++      [1] = {
++              .start          = EZX_IRQ_USB1V,
++              .end            = EZX_IRQ_USB1V,
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++struct platform_device a780_emu_device = {
++      .name           = "ezx-emu",
++      .id             = -1,
++      .dev            = {
++              .parent         = &a780_pcap_device.dev,
++      },
++      .num_resources  = ARRAY_SIZE(a780_emu_resources),
++      .resource       = a780_emu_resources,
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &a780_pcap_device,
++      &a780_emu_device,
+ };
+ 
+ static void __init a780_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a780-flip.patch b/packages/linux/linux-ezx-2.6.24/patches/a780-flip.patch
new file mode 100644 (file)
index 0000000..44b9788
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a780-flip.patch
@@ -0,0 +1,46 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c     2007-10-23 19:37:58.000000000 +0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c  2007-10-23 19:38:04.000000000 +0200
+@@ -18,6 +18,7 @@
+ #include <linux/irq.h>
+ #include <linux/log2.h>
+ #include <linux/input.h>
++#include <linux/gpio_keys.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -312,10 +313,33 @@
+       .resource       = pcap_ts_resources,
+ };
+ 
++static struct gpio_keys_button a780flip_buttons[] = {
++       [0] = {
++               .code           = KEY_SLEEP,
++               .gpio           = GPIO_FLIP_PIN,
++               .desc           = "A780 flip",
++       },
++};
++
++static struct gpio_keys_platform_data a780flip_platform_data = {
++       .buttons        = a780flip_buttons,
++       .nbuttons       = 1,
++};
++
++static struct platform_device a780flip_device = {
++       .name           = "gpio-keys",
++       .id             = -1,
++       .dev            = {
++               .platform_data  = &a780flip_platform_data,
++       },
++};
++
++
+ static struct platform_device *devices[] __initdata = {
+       &a780_pcap_device,
+       &a780_emu_device,
+       &pcap_ts_device,
++      &a780flip_device,
+ };
+ 
+ static void __init a780_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a780-kbd.patch b/packages/linux/linux-ezx-2.6.24/patches/a780-kbd.patch
new file mode 100644 (file)
index 0000000..fa22c72
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a780-kbd.patch
@@ -0,0 +1,90 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c
+@@ -17,6 +17,7 @@
+ #include <linux/mmc/host.h>
+ #include <linux/irq.h>
+ #include <linux/log2.h>
++#include <linux/input.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -25,11 +26,13 @@
+ #include <asm/arch/ezx.h>
+ #include <asm/arch/ezx-pcap.h>
+ #include <asm/arch/mmc.h>
++#include <asm/arch/kbd.h>
+ 
+ #include "generic.h"
+ 
+ extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
+ extern void ezx_backlight_power(int);
++extern void __init pxa_set_kbd_info(struct pxakbd_platform_data *);
+ 
+ #ifdef CONFIG_EZX_PCAP
+ extern int ezx_pcap_mmcsd_power(int);
+@@ -236,6 +239,55 @@
+       .resource       = a780_emu_resources,
+ };
+ 
++static unsigned char a780_keycode[] = {
++       /* row 0 */
++       KEY_PHONE, KEY_MENU, KEY_CANCEL, KEY_PAGEUP, KEY_UP,
++       /* row 1 */
++       KEY_KP1, KEY_KP2, KEY_KP3, KEY_ENTER, KEY_KPENTER, /*center joypad */
++       /* row 2 */
++       KEY_KP4, KEY_KP5, KEY_KP6, KEY_RECORD, KEY_LEFT,
++       /* row 3 */
++       KEY_KP7, KEY_KP8, KEY_KP9, KEY_HOME, KEY_RIGHT,
++       /* row 4 */
++       KEY_KPASTERISK, KEY_KP0, KEY_KPDOT, KEY_PAGEDOWN, KEY_DOWN,
++};
++
++static unsigned char a780_direct_keycode[] = {
++       KEY_CAMERA,
++};
++
++static int a780_kbd_init(void)
++{
++       pxa_gpio_mode(93 | GPIO_ALT_FN_1_IN);   /* KP_DKIN<0>, voice_rec */
++       pxa_gpio_mode(97 | GPIO_ALT_FN_3_IN);   /* KP_MKIN<3> */
++       pxa_gpio_mode(98 | GPIO_ALT_FN_3_IN);   /* KP_MKIN<4> */
++       pxa_gpio_mode(100 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<0> */
++       pxa_gpio_mode(101 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<1> */
++       pxa_gpio_mode(102 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<2> */
++       pxa_gpio_mode(103 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<0> */
++       pxa_gpio_mode(104 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<1> */
++       pxa_gpio_mode(105 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<2> */
++       pxa_gpio_mode(106 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<3> */
++       pxa_gpio_mode(107 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<4> */
++       PKWR = 0xec400;
++       PGSR3 |= 0xf80;
++       return 0;
++}
++
++static struct pxakbd_platform_data a780_kbd_platform_data = {
++       .init           = &a780_kbd_init,
++       .scan_interval  = HZ/40,
++       .matrix         = {
++               .keycode = a780_keycode,
++               .cols   = 5,
++               .rows   = 5,
++       },
++       .direct         = {
++               .keycode = a780_direct_keycode,
++               .num    = 1,
++       },
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &a780_pcap_device,
+       &a780_emu_device,
+@@ -256,6 +308,7 @@
+ 
+       set_pxa_fb_info(&a780_fb_info);
+       pxa_set_mci_info(&a780_mci_platform_data);
++      pxa_set_kbd_info(&a780_kbd_platform_data);
+ 
+       /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
+       pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a780-leds.patch b/packages/linux/linux-ezx-2.6.24/patches/a780-leds.patch
new file mode 100644 (file)
index 0000000..edcc713
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a780-leds.patch
@@ -0,0 +1,187 @@
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+Index: linux-2.6.24/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.24.orig/drivers/leds/Kconfig
++++ linux-2.6.24/drivers/leds/Kconfig
+@@ -123,6 +123,13 @@
+         These triggers allow kernel events to drive the LEDs and can
+         be configured via sysfs. If unsure, say Y.
+ 
++config LEDS_A780
++      tristate "LED Support for the Motorola A780 GSM Phone"
++      depends on LEDS_CLASS && PXA_EZX_A780
++      help
++        This option enables support for the LEDs on the
++        Motorola A780 GSM Phone.
++
+ config LEDS_TRIGGER_TIMER
+       tristate "LED Timer Trigger"
+       depends on LEDS_TRIGGERS
+Index: linux-2.6.24/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.24.orig/drivers/leds/Makefile
++++ linux-2.6.24/drivers/leds/Makefile
+@@ -19,6 +19,7 @@
+ obj-$(CONFIG_LEDS_COBALT_RAQ)         += leds-cobalt-raq.o
+ obj-$(CONFIG_LEDS_GPIO)                       += leds-gpio.o
+ obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
++obj-$(CONFIG_LEDS_A780)               += leds-a780.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)      += ledtrig-timer.o
+Index: linux-2.6.24/drivers/leds/leds-a780.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/leds/leds-a780.c
+@@ -0,0 +1,122 @@
++/*
++ * EZX Platform LED Driver for the Motorola A780 GSM Phone
++ *
++ * Copyright 2006 Vanille-Media
++ *
++ * Author: Michael Lauer <mickey@Vanille.de>
++ *
++ * Based on keylight.c by Motorola and leds-corgi.c by Richard Purdie
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <asm/arch/ezx-pcap.h>
++
++static void a780led_main_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++      if ( value > 31 ) value = 31;
++      printk( KERN_DEBUG "a780led_main_set: %d\n", value );
++      ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL0, value & 0x01);
++      ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL1, value & 0x02);
++      ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL2, value & 0x04);
++      ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL3, value & 0x08);
++      ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL4, value & 0x10);
++}
++
++static void a780led_aux_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++      if ( value > 31 ) value = 31;
++      printk( KERN_DEBUG "a780led_aux_set: %d\n", value );
++      ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL0, value & 0x01);
++      ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL1, value & 0x02);
++      ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL2, value & 0x04);
++      ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL3, value & 0x08);
++      ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL4, value & 0x10);
++}
++
++static struct led_classdev a780_main_led = {
++      .name                   = "a780:main",
++      .default_trigger        = "none",
++      .brightness_set         = a780led_main_set,
++};
++
++static struct led_classdev a780_aux_led = {
++      .name                   = "a780:aux",
++      .default_trigger        = "none",
++      .brightness_set         = a780led_aux_set,
++};
++
++#ifdef CONFIG_PM
++static int a780led_suspend(struct platform_device *dev, pm_message_t state)
++{
++      led_classdev_suspend(&a780_main_led);
++      led_classdev_suspend(&a780_aux_led);
++      return 0;
++}
++
++static int a780led_resume(struct platform_device *dev)
++{
++      led_classdev_resume(&a780_main_led);
++      led_classdev_resume(&a780_aux_led);
++      return 0;
++}
++#endif
++
++static int a780led_probe(struct platform_device *pdev)
++{
++      int ret;
++
++      ret = led_classdev_register(&pdev->dev, &a780_main_led);
++      if (ret < 0)
++              return ret;
++
++      ret = led_classdev_register(&pdev->dev, &a780_aux_led);
++      if (ret < 0)
++              led_classdev_unregister(&a780_main_led);
++
++      return ret;
++}
++
++static int a780led_remove(struct platform_device *pdev)
++{
++      led_classdev_unregister(&a780_main_led);
++      led_classdev_unregister(&a780_aux_led);
++      return 0;
++}
++
++static struct platform_driver a780led_driver = {
++      .probe          = a780led_probe,
++      .remove         = a780led_remove,
++#ifdef CONFIG_PM
++      .suspend        = a780led_suspend,
++      .resume         = a780led_resume,
++#endif
++      .driver         = {
++              .name           = "a780-led",
++      },
++};
++
++static int __init a780led_init(void)
++{
++      return platform_driver_register(&a780led_driver);
++}
++
++static void __exit a780led_exit(void)
++{
++      a780led_main_set( &a780_main_led, 0 );
++      a780led_aux_set( &a780_aux_led, 0 );
++      platform_driver_unregister(&a780led_driver);
++}
++
++module_init(a780led_init);
++module_exit(a780led_exit);
++
++MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
++MODULE_DESCRIPTION("Motorola A780 LED driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx-a780.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/ezx-a780.c
++++ linux-2.6.24/arch/arm/mach-pxa/ezx-a780.c
+@@ -334,12 +334,20 @@
+        },
+ };
+ 
++static struct platform_device a780led_device = {
++      .name           = "a780-led",
++      .id             = -1,
++      .dev            = {
++              .parent = &a780_pcap_device.dev,
++      },
++};
+ 
+ static struct platform_device *devices[] __initdata = {
+       &a780_pcap_device,
+       &a780_emu_device,
+       &pcap_ts_device,
+       &a780flip_device,
++      &a780led_device,
+ };
+ 
+ static void __init a780_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a780-mci.patch b/packages/linux/linux-ezx-2.6.24/patches/a780-mci.patch
new file mode 100644 (file)
index 0000000..591db70
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a780-mci.patch
@@ -0,0 +1,125 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c
+@@ -14,6 +14,9 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/fb.h>
++#include <linux/mmc/host.h>
++#include <linux/irq.h>
++#include <linux/log2.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -21,12 +24,102 @@
+ #include <asm/arch/pxafb.h>
+ #include <asm/arch/ezx.h>
+ #include <asm/arch/ezx-pcap.h>
++#include <asm/arch/mmc.h>
+ 
+ #include "generic.h"
+ 
+ extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
+ extern void ezx_backlight_power(int);
+ 
++#ifdef CONFIG_EZX_PCAP
++extern int ezx_pcap_mmcsd_power(int);
++extern void ezx_pcap_mmcsd_voltage(u_int32_t);
++#else
++#define ezx_pcap_mmcsd_voltage(x) {}
++#define ezx_pcap_mmcsd_power(x) {}
++#endif
++
++static struct pxamci_platform_data a780_mci_platform_data;
++
++static u_int8_t mmc_voltage[] = {
++      [ilog2(MMC_VDD_165_195)] = 6,
++      [ilog2(MMC_VDD_20_21)] = 7,
++      [ilog2(MMC_VDD_21_22)] = 8,
++      [ilog2(MMC_VDD_22_23)] = 8,
++      [ilog2(MMC_VDD_23_24)] = 9,
++      [ilog2(MMC_VDD_24_25)] = 9,
++      [ilog2(MMC_VDD_25_26)] = 10,
++      [ilog2(MMC_VDD_26_27)] = 10,
++      [ilog2(MMC_VDD_27_28)] = 11,
++      [ilog2(MMC_VDD_28_29)] = 11,
++      [ilog2(MMC_VDD_29_30)] = 12,
++      [ilog2(MMC_VDD_30_31)] = 12,
++      [ilog2(MMC_VDD_31_32)] = 13,
++      [ilog2(MMC_VDD_32_33)] = 13,
++      [ilog2(MMC_VDD_33_34)] = 14,
++      [ilog2(MMC_VDD_34_35)] = 14,
++      [ilog2(MMC_VDD_35_36)] = 15,
++};
++
++static int a780_mci_init(struct device *dev,
++                       irqreturn_t (*ezx_detect_int)(int, void *),
++                       void *data)
++{
++       int err;
++
++       /* Setup GPIO for PXA27x MMC/SD controller */
++       pxa_gpio_mode(GPIO32_MMCCLK_MD);
++       pxa_gpio_mode(GPIO112_MMCCMD_MD);
++       pxa_gpio_mode(GPIO92_MMCDAT0_MD);
++       pxa_gpio_mode(GPIO109_MMCDAT1_MD);
++       pxa_gpio_mode(GPIO110_MMCDAT2_MD);
++       pxa_gpio_mode(GPIO111_MMCDAT3_MD);
++
++       ezx_pcap_mmcsd_power(1);
++
++       a780_mci_platform_data.detect_delay = msecs_to_jiffies(250);
++
++       err = request_irq(0x49, ezx_detect_int, IRQF_DISABLED,
++                       "MMC card detect", data);
++       if (err) {
++               printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request "
++                       "MMC card detect IRQ\n");
++               return -1;
++       }
++
++       set_irq_type(0x0b, IRQT_BOTHEDGE);
++
++       return 0;
++}
++
++static void a780_mci_setpower(struct device *dev, unsigned int vdd)
++{
++      struct pxamci_platform_data* p_d = dev->platform_data;
++
++      if (( 1 << vdd) & p_d->ocr_mask)
++              ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]);
++
++      ezx_pcap_mmcsd_power(1);
++}
++
++static void a780_mci_exit(struct device *dev, void *data)
++{
++      ezx_pcap_mmcsd_power(0);
++      free_irq(0x49, data);
++}
++
++static struct pxamci_platform_data a780_mci_platform_data = {
++      .ocr_mask       = MMC_VDD_165_195|MMC_VDD_20_21|MMC_VDD_21_22
++                        |MMC_VDD_22_23|MMC_VDD_23_24|MMC_VDD_24_25
++                        |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28
++                        |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31
++                        |MMC_VDD_31_32|MMC_VDD_32_33|MMC_VDD_33_34
++                        |MMC_VDD_34_35|MMC_VDD_35_36,
++      .init           = a780_mci_init,
++      .setpower       = a780_mci_setpower,
++      .exit           = a780_mci_exit,
++};
++
+ static struct pxafb_mode_info mode_a780 = {
+       .pixclock       = 150000,
+       .xres           = 240,
+@@ -137,6 +230,7 @@
+       PSLR  = 0x05800f00;
+ 
+       set_pxa_fb_info(&a780_fb_info);
++      pxa_set_mci_info(&a780_mci_platform_data);
+ 
+       /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
+       pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a780-pcap.patch b/packages/linux/linux-ezx-2.6.24/patches/a780-pcap.patch
new file mode 100644 (file)
index 0000000..5533433
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a780-pcap.patch
@@ -0,0 +1,90 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c     2007-11-24 19:58:16.000000000 -0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c  2007-11-24 20:09:28.000000000 -0200
+@@ -20,6 +20,7 @@
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/pxafb.h>
+ #include <asm/arch/ezx.h>
++#include <asm/arch/ezx-pcap.h>
+ 
+ #include "generic.h"
+ 
+@@ -49,7 +50,77 @@
+       .pxafb_lcd_power = &ezx_lcd_power,
+ };
+ 
++/* PCAP */
++static int a780_pcap_init(void)
++{
++      /* initialize PCAP registers */
++      /* set SW1 sleep to keep SW1 1.3v in sync mode */
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE10, 0);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE11, 0);
++
++      /*  SW1 active in sync mode */
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE00, 1);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE01, 0);
++
++      /*  at SW1 -core voltage to 1.30V   */
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW10_DVS, 1);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW11_DVS, 1);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW12_DVS, 1);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW13_DVS, 0);
++
++      /* when STANDY2 PIN ACTIVE (high) set V3-- sram V8 -- pll off  */
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_STBY, 1);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_LOWPWR, 0);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_STBY, 1);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_LOWPWR, 0);
++
++      /*
++       * when STANDY2 PIN ACTIVE (high) set V4-- lcd only for e680 V6 ---
++       * camera for e680
++       */
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_STBY, 1);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_LOWPWR, 1);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_STBY, 1);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_LOWPWR, 0);
++
++      /* set Vc to low power mode when AP sleep */
++//    SSP_PCAP_bit_set(PCAP_BIT_LOWPWR_CTRL_VC_STBY);
++
++      /* set VAUX2 to low power mode when AP sleep */
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_STBY, 1);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_LOWPWR, 1);
++
++      return 0;
++}
++
++static struct pcap_platform_data a780_pcap_platform_data = {
++      .port           = 1,
++      .cs             = GPIO_SPI_CE,
++      .flags          = PCAP_MCI_TF,
++      .clk            = 1,
++      .init           = a780_pcap_init,
++};
++
++static struct resource a780_pcap_resources[] = {
++      [0] = {
++              .start          = IRQ_GPIO1,
++              .end            = IRQ_GPIO1,
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++struct platform_device a780_pcap_device = {
++      .name           = "ezx-pcap",
++      .id             = -1,
++      .num_resources  = ARRAY_SIZE(a780_pcap_resources),
++      .resource       = a780_pcap_resources,
++      .dev            = {
++              .platform_data = &a780_pcap_platform_data,
++      },
++};
++
+ static struct platform_device *devices[] __initdata = {
++      &a780_pcap_device,
+ };
+ 
+ static void __init a780_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a780-ts.patch b/packages/linux/linux-ezx-2.6.24/patches/a780-ts.patch
new file mode 100644 (file)
index 0000000..e1dd6ca
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a780-ts.patch
@@ -0,0 +1,39 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c     2007-10-23 19:37:43.000000000 +0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c  2007-10-23 19:37:58.000000000 +0200
+@@ -288,9 +288,34 @@
+        },
+ };
+ 
++/* PCAP_TS */
++struct resource pcap_ts_resources[] = {
++      [0] = {
++              .start          = EZX_IRQ_ADCDONE2,
++              .end            = EZX_IRQ_ADCDONE2,
++              .flags          = IORESOURCE_IRQ,
++      },
++      [1] = {
++              .start          = EZX_IRQ_TS,
++              .end            = EZX_IRQ_TS,
++              .flags          = IORESOURCE_IRQ,
++      }
++};
++
++struct platform_device pcap_ts_device = {
++      .name           = "pcap-ts",
++      .id             = -1,
++      .dev            = {
++              .parent = &a780_pcap_device.dev,
++      },
++      .num_resources  = ARRAY_SIZE(pcap_ts_resources),
++      .resource       = pcap_ts_resources,
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &a780_pcap_device,
+       &a780_emu_device,
++      &pcap_ts_device,
+ };
+ 
+ static void __init a780_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/a780-vibrator.patch b/packages/linux/linux-ezx-2.6.24/patches/a780-vibrator.patch
new file mode 100644 (file)
index 0000000..8e431fb
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/a780-vibrator.patch
@@ -0,0 +1,102 @@
+Index: linux-2.6.24/drivers/leds/leds-a780.c
+===================================================================
+--- linux-2.6.24.orig/drivers/leds/leds-a780.c
++++ linux-2.6.24/drivers/leds/leds-a780.c
+@@ -40,6 +40,17 @@
+       ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL4, value & 0x10);
+ }
+ 
++static void a780vibrator_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++      if (value > 4) value = 4;
++      printk( KERN_DEBUG "a780vibrator_set: %d\n", value );
++      ezx_pcap_vibrator_level(value-1);
++      if (value == 0)
++              ezx_pcap_bit_set(PCAP_BIT_AUXVREG_V_VIB_EN, 0);
++      else
++              ezx_pcap_bit_set(PCAP_BIT_AUXVREG_V_VIB_EN, 1);
++}
++
+ static struct led_classdev a780_main_led = {
+       .name                   = "a780:main",
+       .default_trigger        = "none",
+@@ -52,11 +63,18 @@
+       .brightness_set         = a780led_aux_set,
+ };
+ 
++static struct led_classdev a780_vibrator = {
++      .name                   = "a780:vibrator",
++      .default_trigger        = "none",
++      .brightness_set         = a780vibrator_set,
++};
++
+ #ifdef CONFIG_PM
+ static int a780led_suspend(struct platform_device *dev, pm_message_t state)
+ {
+       led_classdev_suspend(&a780_main_led);
+       led_classdev_suspend(&a780_aux_led);
++      led_classdev_suspend(&a780_vibrator);
+       return 0;
+ }
+ 
+@@ -64,6 +82,7 @@
+ {
+       led_classdev_resume(&a780_main_led);
+       led_classdev_resume(&a780_aux_led);
++      led_classdev_resume(&a780_vibrator);
+       return 0;
+ }
+ #endif
+@@ -77,8 +96,16 @@
+               return ret;
+ 
+       ret = led_classdev_register(&pdev->dev, &a780_aux_led);
+-      if (ret < 0)
++      if (ret < 0) {
++              led_classdev_unregister(&a780_main_led);
++              return ret;
++      }
++
++      ret = led_classdev_register(&pdev->dev, &a780_vibrator);
++      if (ret < 0) {
+               led_classdev_unregister(&a780_main_led);
++              led_classdev_unregister(&a780_aux_led);
++      }
+ 
+       return ret;
+ }
+@@ -87,6 +114,7 @@
+ {
+       led_classdev_unregister(&a780_main_led);
+       led_classdev_unregister(&a780_aux_led);
++      led_classdev_unregister(&a780_vibrator);
+       return 0;
+ }
+ 
+@@ -111,6 +139,7 @@
+ {
+       a780led_main_set( &a780_main_led, 0 );
+       a780led_aux_set( &a780_aux_led, 0 );
++      a780vibrator_set( &a780_vibrator, 0 );
+       platform_driver_unregister(&a780led_driver);
+ }
+ 
+Index: linux-2.6.24/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.24.orig/drivers/leds/Kconfig
++++ linux-2.6.24/drivers/leds/Kconfig
+@@ -124,11 +124,11 @@
+         be configured via sysfs. If unsure, say Y.
+ 
+ config LEDS_A780
+-      tristate "LED Support for the Motorola A780 GSM Phone"
++      tristate "LED/Vibrator Support for the Motorola A780 GSM Phone"
+       depends on LEDS_CLASS && PXA_EZX_A780
+       help
+-        This option enables support for the LEDs on the
+-        Motorola A780 GSM Phone.
++        This option enables support for the LEDs and the
++        vibrator on the Motorola A780 GSM Phone.
+ 
+ config LEDS_E680
+       tristate "LED Support for the Motorola E680(i) GSM Phone"

diff --git a/packages/linux/linux-ezx-2.6.24/patches/asoc-fix-loopback.patch b/packages/linux/linux-ezx-2.6.24/patches/asoc-fix-loopback.patch
new file mode 100644 (file)
index 0000000..feea138
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/asoc-fix-loopback.patch
@@ -0,0 +1,14 @@
+Index: linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c
+===================================================================
+--- linux-2.6.21.orig/sound/soc/pxa/pxa2xx-pcm.c       2007-09-02 22:30:56.000000000 -0300
++++ linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c    2007-09-02 22:36:26.000000000 -0300
+@@ -153,7 +153,8 @@
+ static int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream)
+ {
+       struct pxa2xx_runtime_data *prtd = substream->runtime->private_data;
+-
++      /* no dma if on loopback */
++      if (!prtd->params) return 0;
+       DCSR(prtd->dma_ch) &= ~DCSR_RUN;
+       DCSR(prtd->dma_ch) = 0;
+       DCMD(prtd->dma_ch) = 0;

diff --git a/packages/linux/linux-ezx-2.6.24/patches/asoc-pxa-ssp.patch b/packages/linux/linux-ezx-2.6.24/patches/asoc-pxa-ssp.patch
new file mode 100644 (file)
index 0000000..e53b61c
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/asoc-pxa-ssp.patch
@@ -0,0 +1,755 @@
+Index: linux-2.6.23/sound/soc/pxa/pxa2xx-ssp.c
+===================================================================
+--- /dev/null  1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23/sound/soc/pxa/pxa2xx-ssp.c    2007-10-22 22:27:11.000000000 +0200
+@@ -0,0 +1,671 @@
++/*
++ * pxa2xx-ssp.c  --  ALSA Soc Audio Layer
++ *
++ * Copyright 2005 Wolfson Microelectronics PLC.
++ * Author: Liam Girdwood
++ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ *  Revision history
++ *    12th Aug 2005   Initial version.
++ *
++ * TODO:
++ *  o The SSP driver _mostly_ works, however is in need of testing and
++ *     someone with time to complete it.
++ *  o Test network mode for > 16bit sample size
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/initval.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++
++#include <asm/hardware.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/audio.h>
++#include <asm/arch/ssp.h>
++
++#include "pxa2xx-pcm.h"
++#include "pxa2xx-ssp.h"
++
++#define PXA_SSP_DEBUG 0
++
++/*
++ * The following should be defined in pxa-regs.h
++ */
++#define SSCR0_ACS             (1 << 30)       /* Audio Clock Select */
++#define SSACD_SCDB            (1 << 3)        /* SSPSYSCLK Divider Bypass (SSCR0[ACS] must be set) */
++#define SSACD_ACPS(x) (x << 4)        /* Audio clock PLL select */
++#define SSACD_ACDS(x) (x << 0)        /* Audio clock divider select */
++
++/*
++ * SSP audio private data
++ */
++struct ssp_priv {
++      unsigned int sysclk;
++};
++
++static struct ssp_priv ssp_clk[3];
++static struct ssp_dev ssp[3];
++#ifdef CONFIG_PM
++static struct ssp_state ssp_state[3];
++#endif
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_mono_out = {
++      .name                   = "SSP1 PCM Mono out",
++      .dev_addr               = __PREG(SSDR_P1),
++      .drcmr                  = &DRCMRTXSSDR,
++      .dcmd                   = DCMD_INCSRCADDR | DCMD_FLOWTRG |
++                                DCMD_BURST16 | DCMD_WIDTH2,
++};
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_mono_in = {
++      .name                   = "SSP1 PCM Mono in",
++      .dev_addr               = __PREG(SSDR_P1),
++      .drcmr                  = &DRCMRRXSSDR,
++      .dcmd                   = DCMD_INCTRGADDR | DCMD_FLOWSRC |
++                                DCMD_BURST16 | DCMD_WIDTH2,
++};
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_stereo_out = {
++      .name                   = "SSP1 PCM Stereo out",
++      .dev_addr               = __PREG(SSDR_P1),
++      .drcmr                  = &DRCMRTXSSDR,
++      .dcmd                   = DCMD_INCSRCADDR | DCMD_FLOWTRG |
++                                DCMD_BURST16 | DCMD_WIDTH4,
++};
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_stereo_in = {
++      .name                   = "SSP1 PCM Stereo in",
++      .dev_addr               = __PREG(SSDR_P1),
++      .drcmr                  = &DRCMRRXSSDR,
++      .dcmd                   = DCMD_INCTRGADDR | DCMD_FLOWSRC |
++                                DCMD_BURST16 | DCMD_WIDTH4,
++};
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_mono_out = {
++      .name                   = "SSP2 PCM Mono out",
++      .dev_addr               = __PREG(SSDR_P2),
++      .drcmr                  = &DRCMRTXSS2DR,
++      .dcmd                   = DCMD_INCSRCADDR | DCMD_FLOWTRG |
++                                DCMD_BURST16 | DCMD_WIDTH2,
++};
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_mono_in = {
++      .name                   = "SSP2 PCM Mono in",
++      .dev_addr               = __PREG(SSDR_P2),
++      .drcmr                  = &DRCMRRXSS2DR,
++      .dcmd                   = DCMD_INCTRGADDR | DCMD_FLOWSRC |
++                                DCMD_BURST16 | DCMD_WIDTH2,
++};
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_stereo_out = {
++      .name                   = "SSP2 PCM Stereo out",
++      .dev_addr               = __PREG(SSDR_P2),
++      .drcmr                  = &DRCMRTXSS2DR,
++      .dcmd                   = DCMD_INCSRCADDR | DCMD_FLOWTRG |
++                                DCMD_BURST16 | DCMD_WIDTH4,
++};
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_stereo_in = {
++      .name                   = "SSP2 PCM Stereo in",
++      .dev_addr               = __PREG(SSDR_P2),
++      .drcmr                  = &DRCMRRXSS2DR,
++      .dcmd                   = DCMD_INCTRGADDR | DCMD_FLOWSRC |
++                                DCMD_BURST16 | DCMD_WIDTH4,
++};
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_mono_out = {
++      .name                   = "SSP3 PCM Mono out",
++      .dev_addr               = __PREG(SSDR_P3),
++      .drcmr                  = &DRCMRTXSS3DR,
++      .dcmd                   = DCMD_INCSRCADDR | DCMD_FLOWTRG |
++                                DCMD_BURST16 | DCMD_WIDTH2,
++};
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_mono_in = {
++      .name                   = "SSP3 PCM Mono in",
++      .dev_addr               = __PREG(SSDR_P3),
++      .drcmr                  = &DRCMRRXSS3DR,
++      .dcmd                   = DCMD_INCTRGADDR | DCMD_FLOWSRC |
++                                DCMD_BURST16 | DCMD_WIDTH2,
++};
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_stereo_out = {
++      .name                   = "SSP3 PCM Stereo out",
++      .dev_addr               = __PREG(SSDR_P3),
++      .drcmr                  = &DRCMRTXSS3DR,
++      .dcmd                   = DCMD_INCSRCADDR | DCMD_FLOWTRG |
++                                DCMD_BURST16 | DCMD_WIDTH4,
++};
++
++static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_stereo_in = {
++      .name                   = "SSP3 PCM Stereo in",
++      .dev_addr               = __PREG(SSDR_P3),
++      .drcmr                  = &DRCMRRXSS3DR,
++      .dcmd                   = DCMD_INCTRGADDR | DCMD_FLOWSRC |
++                                DCMD_BURST16 | DCMD_WIDTH4,
++};
++
++static struct pxa2xx_pcm_dma_params *ssp_dma_params[3][4] = {
++      {&pxa2xx_ssp1_pcm_mono_out, &pxa2xx_ssp1_pcm_mono_in,
++      &pxa2xx_ssp1_pcm_stereo_out,&pxa2xx_ssp1_pcm_stereo_in,},
++      {&pxa2xx_ssp2_pcm_mono_out, &pxa2xx_ssp2_pcm_mono_in,
++      &pxa2xx_ssp2_pcm_stereo_out, &pxa2xx_ssp2_pcm_stereo_in,},
++      {&pxa2xx_ssp3_pcm_mono_out, &pxa2xx_ssp3_pcm_mono_in,
++      &pxa2xx_ssp3_pcm_stereo_out,&pxa2xx_ssp3_pcm_stereo_in,},
++};
++
++static int pxa2xx_ssp_startup(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
++      int ret = 0;
++
++      if (!rtd->dai->cpu_dai->active) {
++              ret = ssp_init (&ssp[cpu_dai->id], cpu_dai->id + 1,
++                      SSP_NO_IRQ);
++              if (ret < 0)
++                      return ret;
++              ssp_disable(&ssp[cpu_dai->id]);
++      }
++      return ret;
++}
++
++static void pxa2xx_ssp_shutdown(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
++
++      if (!cpu_dai->active) {
++              ssp_disable(&ssp[cpu_dai->id]);
++              ssp_exit(&ssp[cpu_dai->id]);
++      }
++}
++
++#if defined (CONFIG_PXA27x)
++static int cken[3] = {CKEN_SSP1, CKEN_SSP2, CKEN_SSP3};
++#else
++static int cken[3] = {CKEN_SSP, CKEN_NSSP, CKEN_ASSP};
++#endif
++
++#ifdef CONFIG_PM
++
++static int pxa2xx_ssp_suspend(struct platform_device *pdev,
++      struct snd_soc_cpu_dai *dai)
++{
++      if (!dai->active)
++              return 0;
++
++      ssp_save_state(&ssp[dai->id], &ssp_state[dai->id]);
++      pxa_set_cken(cken[dai->id], 0);
++      return 0;
++}
++
++static int pxa2xx_ssp_resume(struct platform_device *pdev,
++      struct snd_soc_cpu_dai *dai)
++{
++      if (!dai->active)
++              return 0;
++
++      pxa_set_cken(cken[dai->id], 1);
++      ssp_restore_state(&ssp[dai->id], &ssp_state[dai->id]);
++      ssp_enable(&ssp[dai->id]);
++
++      return 0;
++}
++
++#else
++#define pxa2xx_ssp_suspend    NULL
++#define pxa2xx_ssp_resume     NULL
++#endif
++
++/*
++ * Set the SSP ports SYSCLK.
++ */
++static int pxa2xx_ssp_set_dai_sysclk(struct snd_soc_cpu_dai *cpu_dai,
++      int clk_id, unsigned int freq, int dir)
++{
++      int port = cpu_dai->id + 1;
++      u32 sscr0 = SSCR0_P(port) &
++              ~(SSCR0_ECS |  SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
++
++      switch (clk_id) {
++      case PXA2XX_SSP_CLK_PLL:
++              /* Internal PLL is fixed on pxa25x and pxa27x */
++#ifdef CONFIG_PXA27x
++              ssp_clk[cpu_dai->id].sysclk = 13000000;
++#else
++              ssp_clk[cpu_dai->id].sysclk = 1843200;
++#endif
++              break;
++      case PXA2XX_SSP_CLK_EXT:
++              ssp_clk[cpu_dai->id].sysclk = freq;
++              sscr0 |= SSCR0_ECS;
++              break;
++      case PXA2XX_SSP_CLK_NET:
++              ssp_clk[cpu_dai->id].sysclk = freq;
++              sscr0 |= SSCR0_NCS | SSCR0_MOD;
++              break;
++      case PXA2XX_SSP_CLK_AUDIO:
++              ssp_clk[cpu_dai->id].sysclk = 0;
++              SSCR0_P(port) |= SSCR0_SerClkDiv(1);
++              sscr0 |= SSCR0_ACS;
++              break;
++      default:
++              return -ENODEV;
++      }
++
++      /* the SSP CKEN clock must be disabled when changing SSP clock mode */
++      pxa_set_cken(cken[cpu_dai->id], 0);
++      SSCR0_P(port) |= sscr0;
++      pxa_set_cken(cken[cpu_dai->id], 1);
++      return 0;
++}
++
++/*
++ * Set the SSP clock dividers.
++ */
++static int pxa2xx_ssp_set_dai_clkdiv(struct snd_soc_cpu_dai *cpu_dai,
++      int div_id, int div)
++{
++      int port = cpu_dai->id + 1;
++
++      switch (div_id) {
++      case PXA2XX_SSP_AUDIO_DIV_ACDS:
++              SSACD_P(port) &= ~ 0x7;
++              SSACD_P(port) |= SSACD_ACDS(div);
++              break;
++      case PXA2XX_SSP_AUDIO_DIV_SCDB:
++              SSACD_P(port) &= ~0x8;
++              if (div == PXA2XX_SSP_CLK_SCDB_1)
++                      SSACD_P(port) |= SSACD_SCDB;
++              break;
++      case PXA2XX_SSP_DIV_SCR:
++              SSCR0_P(port) &= ~SSCR0_SCR;
++              SSCR0_P(port) |= SSCR0_SerClkDiv(div);
++              break;
++      default:
++              return -ENODEV;
++      }
++
++      return 0;
++}
++
++/*
++ * Configure the PLL frequency pxa27x and (afaik - pxa320 only)
++ */
++static int pxa2xx_ssp_set_dai_pll(struct snd_soc_cpu_dai *cpu_dai,
++      int pll_id, unsigned int freq_in, unsigned int freq_out)
++{
++      int port = cpu_dai->id + 1;
++
++      SSACD_P(port) &= ~0x70;
++      switch (freq_out) {
++      case 5622000:
++              break;
++      case 11345000:
++              SSACD_P(port) |= (0x1 << 4);
++              break;
++      case 12235000:
++              SSACD_P(port) |= (0x2 << 4);
++              break;
++      case 14857000:
++              SSACD_P(port) |= (0x3 << 4);
++              break;
++      case 32842000:
++              SSACD_P(port) |= (0x4 << 4);
++              break;
++      case 48000000:
++              SSACD_P(port) |= (0x5 << 4);
++              break;
++      }
++      return 0;
++}
++
++/*
++ * Set the active slots in TDM/Network mode
++ */
++static int pxa2xx_ssp_set_dai_tdm_slot(struct snd_soc_cpu_dai *cpu_dai,
++      unsigned int mask, int slots)
++{
++      int port = cpu_dai->id + 1;
++
++      SSCR0_P(port) &= ~SSCR0_SlotsPerFrm(7);
++
++      /* set number of active slots */
++      SSCR0_P(port) |= SSCR0_SlotsPerFrm(slots);
++
++      /* set active slot mask */
++      SSTSA_P(port) = mask;
++      SSRSA_P(port) = mask;
++      return 0;
++}
++
++/*
++ * Tristate the SSP DAI lines
++ */
++static int pxa2xx_ssp_set_dai_tristate(struct snd_soc_cpu_dai *cpu_dai,
++      int tristate)
++{
++      int port = cpu_dai->id + 1;
++
++      if (tristate)
++              SSCR1_P(port) &= ~SSCR1_TTE;
++      else
++              SSCR1_P(port) |= SSCR1_TTE;
++
++      return 0;
++}
++
++/*
++ * Set up the SSP DAI format.
++ * The SSP Port must be inactive before calling this function as the
++ * physical interface format is changed.
++ */
++static int pxa2xx_ssp_set_dai_fmt(struct snd_soc_cpu_dai *cpu_dai,
++              unsigned int fmt)
++{
++      int port = cpu_dai->id + 1;
++
++      /* reset port settings */
++      SSCR0_P(port) = 0;
++      SSCR1_P(port) = 0;
++      SSPSP_P(port) = 0;
++
++      /* NOTE: I2S emulation is still very much work in progress here */
++
++      /* FIXME: this is what wince uses for msb */
++      if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_MSB) {
++              SSCR0_P(port) = SSCR0_EDSS | SSCR0_TISSP | SSCR0_DataSize(16);
++
++//            SSCR1_P(port) = SSCR1_RxTresh(8) | SSCR1_TxTresh(8); /* doesn't seem to be needed */
++              return 0;
++      }
++
++      /* check for I2S emulation mode - handle it separately  */
++      if (((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) ||
++              ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_MSB)) {
++              /* 8.4.11 */
++
++              /* Only SSCR0[NCS] or SSCR0[ECS] bit fields settings are optional */
++              SSCR0_P(port) = SSCR0_EDSS | SSCR0_PSP | SSCR0_DataSize(16);
++
++              /* SSCR1 = 0x203C3C03 */
++              /* SSCR1[SCLKDIR] and SSCR1[SFRMDIR] must be cleared (master only ???),
++               * all other bit fields settings are optional. */
++              //SSCR1_P(port) &= ~(SSCR1_SCLKDIR | SSCR1_SFRMDIR);
++
++              /* set FIFO thresholds */
++              SSCR1_P(port) = SSCR1_RxTresh(14) | SSCR1_TxTresh(1);
++
++              /* normal: */
++              /* all bit fields must be cleared except: FSRT = 1 and
++               * SFRMWDTH = 16, DMYSTART=0,1) */
++              SSPSP_P(port) = SSPSP_FSRT | SSPSP_SFRMWDTH(16) | SSPSP_DMYSTRT(0);
++              return 0;
++      }
++
++      SSCR0_P(port) |= SSCR0_PSP;
++      SSCR1_P(port) = SSCR1_RxTresh(14) | SSCR1_TxTresh(1) |
++              SSCR1_TRAIL | SSCR1_RWOT;
++
++      switch(fmt & SND_SOC_DAIFMT_MASTER_MASK) {
++      case SND_SOC_DAIFMT_CBM_CFM:
++              SSCR1_P(port) |= (SSCR1_SCLKDIR | SSCR1_SFRMDIR);
++              break;
++      case SND_SOC_DAIFMT_CBM_CFS:
++              SSCR1_P(port) |= SSCR1_SCLKDIR;
++              break;
++      case SND_SOC_DAIFMT_CBS_CFM:
++              SSCR1_P(port) |= SSCR1_SFRMDIR;
++              break;
++      case SND_SOC_DAIFMT_CBS_CFS:
++              break;
++      default:
++              return -EINVAL;
++      }
++
++      switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
++      case SND_SOC_DAIFMT_NB_NF:
++              SSPSP_P(port) |= SSPSP_SFRMP | SSPSP_FSRT;
++              break;
++      case SND_SOC_DAIFMT_IB_IF:
++              break;
++      default:
++              return -EINVAL;
++      }
++
++      switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
++      case SND_SOC_DAIFMT_DSP_A:
++              SSPSP_P(port) |= SSPSP_DMYSTRT(1);
++      case SND_SOC_DAIFMT_DSP_B:
++              SSPSP_P(port) |= SSPSP_SCMODE(2);
++              break;
++      case SND_SOC_DAIFMT_I2S:
++      case SND_SOC_DAIFMT_MSB:
++              /* handled above */
++              break;
++      default:
++              return -EINVAL;
++      }
++
++      return 0;
++}
++
++/*
++ * Set the SSP audio DMA parameters and sample size.
++ * Can be called multiple times by oss emulation.
++ */
++static int pxa2xx_ssp_hw_params(struct snd_pcm_substream *substream,
++                              struct snd_pcm_hw_params *params)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
++      int dma = 0, chn = params_channels(params);
++      int port = cpu_dai->id + 1;
++
++      /* select correct DMA params */
++      if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
++              dma = 1; /* capture DMA offset is 1,3 */
++      if (chn == 2)
++              dma += 2; /* stereo DMA offset is 2, mono is 0 */
++      cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma];
++
++      /* we can only change the settings if the port is not in use */
++      if (SSCR0_P(port) & SSCR0_SSE)
++              return 0;
++
++      /* clear selected SSP bits */
++      SSCR0_P(port) &= ~(SSCR0_DSS | SSCR0_EDSS);
++
++      /* bit size */
++      switch(params_format(params)) {
++      case SNDRV_PCM_FORMAT_S16_LE:
++              SSCR0_P(port) |= SSCR0_DataSize(16);
++              break;
++      case SNDRV_PCM_FORMAT_S24_LE:
++              SSCR0_P(port) |=(SSCR0_EDSS | SSCR0_DataSize(8));
++              /* we must be in network mode (2 slots) for 24 bit stereo */
++              break;
++      case SNDRV_PCM_FORMAT_S32_LE:
++              SSCR0_P(port) |= (SSCR0_EDSS | SSCR0_DataSize(16));
++              /* we must be in network mode (2 slots) for 32 bit stereo */
++              break;
++      }
++
++#if PXA_SSP_DEBUG
++      printk("SSCR0 %x SSCR1 %x SSTO %x SSPSP %x SSSR %x SSACD %x\n",
++              SSCR0_P(port), SSCR1_P(port),
++              SSTO_P(port), SSPSP_P(port),
++              SSSR_P(port), SSACD_P(port));
++#endif
++      return 0;
++}
++
++static int pxa2xx_ssp_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
++      int ret = 0;
++      int port = cpu_dai->id + 1;
++
++      switch (cmd) {
++      case SNDRV_PCM_TRIGGER_RESUME:
++              ssp_enable(&ssp[cpu_dai->id]);
++              break;
++      case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
++              if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++                      SSCR1_P(port) |= SSCR1_TSRE;
++              else
++                      SSCR1_P(port) |= SSCR1_RSRE;
++              SSSR_P(port) |= SSSR_P(port);
++              break;
++      case SNDRV_PCM_TRIGGER_START:
++              if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++                      SSCR1_P(port) |= SSCR1_TSRE;
++              else
++                      SSCR1_P(port) |= SSCR1_RSRE;
++              ssp_enable(&ssp[cpu_dai->id]);
++              break;
++      case SNDRV_PCM_TRIGGER_STOP:
++              if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++                      SSCR1_P(port) &= ~SSCR1_TSRE;
++              else
++                      SSCR1_P(port) &= ~SSCR1_RSRE;
++              break;
++      case SNDRV_PCM_TRIGGER_SUSPEND:
++              ssp_disable(&ssp[cpu_dai->id]);
++              break;
++      case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
++              if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++                      SSCR1_P(port) &= ~SSCR1_TSRE;
++              else
++                      SSCR1_P(port) &= ~SSCR1_RSRE;
++              break;
++
++      default:
++              ret = -EINVAL;
++      }
++#if PXA_SSP_DEBUG
++      printk("trig cmd %d\n", cmd);
++      printk("SSCR0 %x SSCR1 %x SSTO %x SSPSP %x SSSR %x\n",
++              SSCR0_P(port), SSCR1_P(port),
++              SSTO_P(port), SSPSP_P(port),
++              SSSR_P(port));
++#endif
++      return ret;
++}
++
++#define PXA2XX_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
++              SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
++              SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
++
++#define PXA2XX_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
++      SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
++
++struct snd_soc_cpu_dai pxa_ssp_dai[] = {
++      {       .name = "pxa2xx-ssp1",
++              .id = 0,
++              .type = SND_SOC_DAI_PCM,
++              .suspend = pxa2xx_ssp_suspend,
++              .resume = pxa2xx_ssp_resume,
++              .playback = {
++                      .channels_min = 1,
++                      .channels_max = 2,
++                      .rates = PXA2XX_SSP_RATES,
++                      .formats = PXA2XX_SSP_FORMATS,},
++              .capture = {
++                      .channels_min = 1,
++                      .channels_max = 2,
++                      .rates = PXA2XX_SSP_RATES,
++                      .formats = PXA2XX_SSP_FORMATS,},
++              .ops = {
++                      .startup = pxa2xx_ssp_startup,
++                      .shutdown = pxa2xx_ssp_shutdown,
++                      .trigger = pxa2xx_ssp_trigger,
++                      .hw_params = pxa2xx_ssp_hw_params,},
++              .dai_ops = {
++                      .set_sysclk = pxa2xx_ssp_set_dai_sysclk,
++                      .set_clkdiv = pxa2xx_ssp_set_dai_clkdiv,
++                      .set_pll = pxa2xx_ssp_set_dai_pll,
++                      .set_fmt = pxa2xx_ssp_set_dai_fmt,
++                      .set_tdm_slot = pxa2xx_ssp_set_dai_tdm_slot,
++                      .set_tristate = pxa2xx_ssp_set_dai_tristate,
++              },
++      },
++      {       .name = "pxa2xx-ssp2",
++              .id = 1,
++              .type = SND_SOC_DAI_PCM,
++              .suspend = pxa2xx_ssp_suspend,
++              .resume = pxa2xx_ssp_resume,
++              .playback = {
++                      .channels_min = 1,
++                      .channels_max = 2,
++                      .rates = PXA2XX_SSP_RATES,
++                      .formats = PXA2XX_SSP_FORMATS,},
++              .capture = {
++                      .channels_min = 1,
++                      .channels_max = 2,
++                      .rates = PXA2XX_SSP_RATES,
++                      .formats = PXA2XX_SSP_FORMATS,},
++              .ops = {
++                      .startup = pxa2xx_ssp_startup,
++                      .shutdown = pxa2xx_ssp_shutdown,
++                      .trigger = pxa2xx_ssp_trigger,
++                      .hw_params = pxa2xx_ssp_hw_params,},
++              .dai_ops = {
++                      .set_sysclk = pxa2xx_ssp_set_dai_sysclk,
++                      .set_clkdiv = pxa2xx_ssp_set_dai_clkdiv,
++                      .set_pll = pxa2xx_ssp_set_dai_pll,
++                      .set_fmt = pxa2xx_ssp_set_dai_fmt,
++                      .set_tdm_slot = pxa2xx_ssp_set_dai_tdm_slot,
++                      .set_tristate = pxa2xx_ssp_set_dai_tristate,
++              },
++      },
++      {       .name = "pxa2xx-ssp3",
++              .id = 2,
++              .type = SND_SOC_DAI_PCM,
++              .suspend = pxa2xx_ssp_suspend,
++              .resume = pxa2xx_ssp_resume,
++              .playback = {
++                      .channels_min = 1,
++                      .channels_max = 2,
++                      .rates = PXA2XX_SSP_RATES,
++                      .formats = PXA2XX_SSP_FORMATS,},
++              .capture = {
++                      .channels_min = 1,
++                      .channels_max = 2,
++                      .rates = PXA2XX_SSP_RATES,
++                      .formats = PXA2XX_SSP_FORMATS,},
++              .ops = {
++                      .startup = pxa2xx_ssp_startup,
++                      .shutdown = pxa2xx_ssp_shutdown,
++                      .trigger = pxa2xx_ssp_trigger,
++                      .hw_params = pxa2xx_ssp_hw_params,},
++              .dai_ops = {
++                      .set_sysclk = pxa2xx_ssp_set_dai_sysclk,
++                      .set_clkdiv = pxa2xx_ssp_set_dai_clkdiv,
++                      .set_pll = pxa2xx_ssp_set_dai_pll,
++                      .set_fmt = pxa2xx_ssp_set_dai_fmt,
++                      .set_tdm_slot = pxa2xx_ssp_set_dai_tdm_slot,
++                      .set_tristate = pxa2xx_ssp_set_dai_tristate,
++              },
++      },
++};
++EXPORT_SYMBOL_GPL(pxa_ssp_dai);
++
++/* Module information */
++MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com, www.wolfsonmicro.com");
++MODULE_DESCRIPTION("pxa2xx SSP/PCM SoC Interface");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.23/sound/soc/pxa/pxa2xx-ssp.h
+===================================================================
+--- /dev/null  1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23/sound/soc/pxa/pxa2xx-ssp.h    2007-10-22 22:27:11.000000000 +0200
+@@ -0,0 +1,42 @@
++/*
++ * linux/sound/arm/pxa2xx-ssp.h
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _PXA2XX_SSP_H
++#define _PXA2XX_SSP_H
++
++/* pxa2xx DAI SSP ID's */
++#define PXA2XX_DAI_SSP1                       0
++#define PXA2XX_DAI_SSP2                       1
++#define PXA2XX_DAI_SSP3                       2
++
++/* SSP clock sources */
++#define PXA2XX_SSP_CLK_PLL    0
++#define PXA2XX_SSP_CLK_EXT    1
++#define PXA2XX_SSP_CLK_NET    2
++#define PXA2XX_SSP_CLK_AUDIO  3
++
++/* SSP audio dividers */
++#define PXA2XX_SSP_AUDIO_DIV_ACDS             0
++#define PXA2XX_SSP_AUDIO_DIV_SCDB             1
++#define PXA2XX_SSP_DIV_SCR                            2
++
++/* SSP ACDS audio dividers values */
++#define PXA2XX_SSP_CLK_AUDIO_DIV_1            0
++#define PXA2XX_SSP_CLK_AUDIO_DIV_2            1
++#define PXA2XX_SSP_CLK_AUDIO_DIV_4            2
++#define PXA2XX_SSP_CLK_AUDIO_DIV_8            3
++#define PXA2XX_SSP_CLK_AUDIO_DIV_16   4
++#define PXA2XX_SSP_CLK_AUDIO_DIV_32   5
++
++/* SSP divider bypass */
++#define PXA2XX_SSP_CLK_SCDB_4         0
++#define PXA2XX_SSP_CLK_SCDB_1         1
++
++extern struct snd_soc_cpu_dai pxa_ssp_dai[3];
++
++#endif
+Index: linux-2.6.23/sound/soc/pxa/Kconfig
+===================================================================
+--- linux-2.6.23.orig/sound/soc/pxa/Kconfig    2007-10-10 09:38:42.000000000 +0200
++++ linux-2.6.23/sound/soc/pxa/Kconfig 2007-10-22 22:27:11.000000000 +0200
+@@ -18,6 +18,10 @@
+ config SND_PXA2XX_SOC_I2S
+       tristate
+ 
++config SND_PXA2XX_SOC_SSP
++      tristate
++      select PXA_SSP
++
+ config SND_PXA2XX_SOC_CORGI
+       tristate "SoC Audio support for Sharp Zaurus SL-C7x0"
+       depends on SND_PXA2XX_SOC && PXA_SHARP_C7xx
+Index: linux-2.6.23/sound/soc/pxa/Makefile
+===================================================================
+--- linux-2.6.23.orig/sound/soc/pxa/Makefile   2007-10-10 09:38:42.000000000 +0200
++++ linux-2.6.23/sound/soc/pxa/Makefile        2007-10-22 22:27:11.000000000 +0200
+@@ -2,10 +2,12 @@
+ snd-soc-pxa2xx-objs := pxa2xx-pcm.o
+ snd-soc-pxa2xx-ac97-objs := pxa2xx-ac97.o
+ snd-soc-pxa2xx-i2s-objs := pxa2xx-i2s.o
++snd-soc-pxa2xx-ssp-objs := pxa2xx-ssp.o
+ 
+ obj-$(CONFIG_SND_PXA2XX_SOC) += snd-soc-pxa2xx.o
+ obj-$(CONFIG_SND_PXA2XX_SOC_AC97) += snd-soc-pxa2xx-ac97.o
+ obj-$(CONFIG_SND_PXA2XX_SOC_I2S) += snd-soc-pxa2xx-i2s.o
++obj-$(CONFIG_SND_PXA2XX_SOC_SSP) += snd-soc-pxa2xx-ssp.o
+ 
+ # PXA Machine Support
+ snd-soc-corgi-objs := corgi.o

diff --git a/packages/linux/linux-ezx-2.6.24/patches/binutils-buildid-arm.patch b/packages/linux/linux-ezx-2.6.24/patches/binutils-buildid-arm.patch
new file mode 100644 (file)
index 0000000..68e35e8
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/binutils-buildid-arm.patch
@@ -0,0 +1,16 @@
+---
+ arch/arm/kernel/vmlinux.lds.S |    1 +
+ 1 file changed, 1 insertion(+)
+
+Index: linux-2.6.22/arch/arm/kernel/vmlinux.lds.S
+===================================================================
+--- linux-2.6.22.orig/arch/arm/kernel/vmlinux.lds.S    2007-09-11 18:32:29.000000000 +0200
++++ linux-2.6.22/arch/arm/kernel/vmlinux.lds.S 2007-09-11 18:33:42.000000000 +0200
+@@ -94,6 +94,7 @@
+                       TEXT_TEXT
+                       SCHED_TEXT
+                       LOCK_TEXT
++                      *(.note.*)
+ #ifdef CONFIG_MMU
+                       *(.fixup)
+ #endif

diff --git a/packages/linux/linux-ezx-2.6.24/patches/defconfig-a1200 b/packages/linux/linux-ezx-2.6.24/patches/defconfig-a1200
new file mode 100644 (file)
index 0000000..b77950a
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/defconfig-a1200
@@ -0,0 +1,1205 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Sun Jan 27 16:09:08 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA_EZX=y
+# CONFIG_PXA_EZX_E680 is not set
+# CONFIG_PXA_EZX_A780 is not set
+# CONFIG_PXA_EZX_E2 is not set
+CONFIG_PXA_EZX_A1200=y
+# CONFIG_PXA_EZX_E6 is not set
+# CONFIG_EZX_BP is not set
+CONFIG_EZX_PCAP=y
+CONFIG_EZX_EOC=y
+# CONFIG_EZX_EMU is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_SUSPEND is not set
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+CONFIG_MTD_EZX=y
+# CONFIG_MTD_EZX_A780 is not set
+# CONFIG_MTD_EZX_A780_ALTERNATE is not set
+CONFIG_MTD_EZX_A1200=y
+# CONFIG_MTD_EZX_E2 is not set
+# CONFIG_MTD_EZX_E6 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+# CONFIG_BACKLIGHT_EZX is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA2XX_SOC_SSP=y
+CONFIG_SND_PXA2XX_SOC_EZX=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_PCAP2=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

diff --git a/packages/linux/linux-ezx-2.6.24/patches/defconfig-a780 b/packages/linux/linux-ezx-2.6.24/patches/defconfig-a780
new file mode 100644 (file)
index 0000000..b10c2e9
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/defconfig-a780
@@ -0,0 +1,1502 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Sun Jan 27 15:19:17 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA_EZX=y
+# CONFIG_PXA_EZX_E680 is not set
+CONFIG_PXA_EZX_A780=y
+# CONFIG_PXA_EZX_E2 is not set
+# CONFIG_PXA_EZX_A1200 is not set
+# CONFIG_PXA_EZX_E6 is not set
+CONFIG_EZX_BP=y
+CONFIG_EZX_PCAP=y
+# CONFIG_EZX_EOC is not set
+CONFIG_EZX_EMU=y
+CONFIG_EZX_EMU_USB=y
+# CONFIG_EZX_EMU_UART is not set
+# CONFIG_EZX_EMU_NOTHING is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1  root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0   debug mem=32M@0xA0000000 mem=16M@0xAC000000"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_SUSPEND is not set
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RCSIMPLE=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+CONFIG_MTD_EZX=y
+CONFIG_MTD_EZX_A780=y
+# CONFIG_MTD_EZX_A780_ALTERNATE is not set
+# CONFIG_MTD_EZX_A1200 is not set
+# CONFIG_MTD_EZX_E2 is not set
+# CONFIG_MTD_EZX_E6 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_TS0710_MUX=y
+CONFIG_TS0710_MUX_USB=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_EZX=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA2XX_SOC_SSP=y
+CONFIG_SND_PXA2XX_SOC_EZX=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_PCAP2=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_A780=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ABLKCIPHER=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

diff --git a/packages/linux/linux-ezx-2.6.24/patches/defconfig-e2 b/packages/linux/linux-ezx-2.6.24/patches/defconfig-e2
new file mode 100644 (file)
index 0000000..8f870b8
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/defconfig-e2
@@ -0,0 +1,1188 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Sun Jan 27 16:13:35 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA_EZX=y
+# CONFIG_PXA_EZX_E680 is not set
+# CONFIG_PXA_EZX_A780 is not set
+# CONFIG_PXA_EZX_E2 is not set
+CONFIG_PXA_EZX_A1200=y
+# CONFIG_PXA_EZX_E6 is not set
+# CONFIG_EZX_BP is not set
+CONFIG_EZX_PCAP=y
+CONFIG_EZX_EOC=y
+# CONFIG_EZX_EMU is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_SUSPEND is not set
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_EZX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+# CONFIG_BACKLIGHT_EZX is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA2XX_SOC_SSP=y
+CONFIG_SND_PXA2XX_SOC_EZX=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_PCAP2=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

diff --git a/packages/linux/linux-ezx-2.6.24/patches/defconfig-e6 b/packages/linux/linux-ezx-2.6.24/patches/defconfig-e6
new file mode 100644 (file)
index 0000000..7e89e52
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/defconfig-e6
@@ -0,0 +1,1200 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Sun Jan 27 16:14:27 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA_EZX=y
+# CONFIG_PXA_EZX_E680 is not set
+# CONFIG_PXA_EZX_A780 is not set
+# CONFIG_PXA_EZX_E2 is not set
+# CONFIG_PXA_EZX_A1200 is not set
+CONFIG_PXA_EZX_E6=y
+# CONFIG_EZX_BP is not set
+CONFIG_EZX_PCAP=y
+CONFIG_EZX_EOC=y
+# CONFIG_EZX_EMU is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_SUSPEND is not set
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_EZX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+# CONFIG_BACKLIGHT_EZX is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA2XX_SOC_SSP=y
+CONFIG_SND_PXA2XX_SOC_EZX=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_PCAP2=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

diff --git a/packages/linux/linux-ezx-2.6.24/patches/defconfig-e680 b/packages/linux/linux-ezx-2.6.24/patches/defconfig-e680
new file mode 100644 (file)
index 0000000..cb31751
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/defconfig-e680
@@ -0,0 +1,1211 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Sun Jan 27 16:15:42 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA_EZX=y
+CONFIG_PXA_EZX_E680=y
+# CONFIG_PXA_EZX_A780 is not set
+# CONFIG_PXA_EZX_E2 is not set
+# CONFIG_PXA_EZX_A1200 is not set
+# CONFIG_PXA_EZX_E6 is not set
+CONFIG_EZX_BP=y
+CONFIG_EZX_PCAP=y
+# CONFIG_EZX_EOC is not set
+CONFIG_EZX_EMU=y
+CONFIG_EZX_EMU_USB=y
+# CONFIG_EZX_EMU_UART is not set
+# CONFIG_EZX_EMU_NOTHING is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000 mem=16M@0xAC000000"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_SUSPEND is not set
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+CONFIG_MTD_EZX=y
+CONFIG_MTD_EZX_A780=y
+# CONFIG_MTD_EZX_A780_ALTERNATE is not set
+# CONFIG_MTD_EZX_A1200 is not set
+# CONFIG_MTD_EZX_E2 is not set
+# CONFIG_MTD_EZX_E6 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_TS0710_MUX=y
+CONFIG_TS0710_MUX_USB=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_EZX=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA2XX_SOC_SSP=y
+CONFIG_SND_PXA2XX_SOC_EZX=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_PCAP2=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_E680=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

diff --git a/packages/linux/linux-ezx-2.6.24/patches/dmesg-a780.log b/packages/linux/linux-ezx-2.6.24/patches/dmesg-a780.log
new file mode 100644 (file)
index 0000000..6b15077
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/dmesg-a780.log
@@ -0,0 +1,299 @@
+<5>Linux version 2.6.21-ezxdev (wyrm@vault) (gcc version 4.1.1) #222 PREEMPT Tue May 8 15:19:34 BRT 2007
+<4>CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f
+<4>Machine: Motorola Ezx Platform
+<4>Memory policy: ECC disabled, Data cache writeback
+<7>On node 0 totalpages: 12288
+<7>  DMA zone: 416 pages used for memmap
+<7>  DMA zone: 0 pages reserved
+<7>  DMA zone: 11872 pages, LIFO batch:1
+<7>  Normal zone: 0 pages used for memmap
+<6>Run Mode clock: 195.00MHz (*15)
+<6>Turbo Mode clock: 292.50MHz (*1.5, active)
+<6>Memory clock: 195.00MHz (/2)
+<6>System bus clock: 195.00MHz 
+<4>CPU0: D VIVT undefined 5 cache
+<4>CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
+<4>CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
+<4>Built 1 zonelists.  Total pages: 11872
+<5>Kernel command line: console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext3 ip=169.254.1.11:169.254.1.10:169.254.1.10:255.255.255.254:ezx:usb0:off debug mem=32M@0xA0000000 mem=16M@0xAC000000
+<4>PID hash table entries: 256 (order: 8, 1024 bytes)
+<4>Console: colour dummy device 80x30
+<4>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
+<4>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
+<6>Memory: 32MB 16MB = 48MB total
+<5>Memory: 46084KB available (2264K code, 217K data, 84K init)
+<7>Calibrating delay loop... 291.63 BogoMIPS (lpj=1458176)
+<4>Mount-cache hash table entries: 512
+<6>CPU: Testing write buffer coherency: ok
+<6>NET: Registered protocol family 16
+<6>usbcore: registered new interface driver usbfs
+<6>usbcore: registered new interface driver hub
+<6>usbcore: registered new device driver usb
+<6>Time: pxa_timer clocksource has been installed.
+<6>NET: Registered protocol family 2
+<4>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
+<4>TCP established hash table entries: 2048 (order: 2, 16384 bytes)
+<4>TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
+<6>TCP: Hash tables configured (established 2048 bind 2048)
+<6>TCP reno registered
+<4>bp handshake entered!
+<4>ezx-bp: handshake step 2
+<4>BP rdy irq
+<4>bp handshake entered!
+<5>ezx-bp: handshake passed
+<4>ezx-pcap: ssp driver registered
+<6>io scheduler noop registered
+<6>io scheduler deadline registered (default)
+<4>pxa2xx-fb pxa2xx-fb: machine LCCR0 setting contains illegal bits: 00200878
+<4>pxa2xx-fb pxa2xx-fb: machine LCCR3 setting contains illegal bits: 00300008
+<4>Console: switching to colour frame buffer device 60x53
+<6>usbcore: registered new interface driver usb ipc
+<6>drivers/char/ts0710_mux_usb.c: USB Host(Bulverde) IPC driver registered.
+<6>drivers/char/ts0710_mux_usb.c: 1.0alpha1:USB IPC Driver (TS07.10 lowlevel)
+<6>pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
+<6>pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
+<6>pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
+<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
+<6>pxa27x-ohci pxa27x-ohci: PXA27x OHCI
+<6>pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1
+<6>pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000
+<6>usb usb1: configuration #1 chosen from 1 choice
+<6>hub 1-0:1.0: USB hub found
+<6>hub 1-0:1.0: 3 ports detected
+<6>pxa27x_udc: version 08-Feb-2007
+<5>USB cmd disconnect
+<5>USB cmd disconnect
+<4>ether gadget: using random self ethernet address
+<4>ether gadget: using random host ethernet address
+<6>usb0: Ethernet Gadget, version: May Day 2005
+<6>usb0: using pxa27x_udc, OUT Bulk-out-2 IN Bulk-in-1
+<6>usb0: MAC 46:86:e0:79:e7:fb
+<5>USB cmd connect
+<5>USB cmd connect
+<6>input: gpio-keys as /class/input/input0
+<6>input: pxa-keyboard as /class/input/input1
+<6>input: pcap-touchscreen as /class/input/input2
+<6>sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
+<6>Registered led device: a780:main
+<6>Registered led device: a780:aux
+<6>Registered led device: a780:vibrator
+<6>TCP cubic registered
+<6>NET: Registered protocol family 1
+<6>NET: Registered protocol family 17
+<6>XScale iWMMXt coprocessor detected.
+<6>sa1100-rtc sa1100-rtc: setting the system clock to 1970-01-01 00:00:16 (16)
+<6>mmcblk0: mmc0:bffc SU02G 1985024KiB 
+<6>udc: USB reset
+<6> mmcblk0:<6>usb 1-3: new full speed USB device using pxa27x-ohci and address 2
+<4> p1 p2 p3 < p5 p6 p7 >
+<6>udc: USB reset
+<3>usb 1-3: device descriptor read/64, error -62
+<6>usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset
+<3>usb 1-3: device descriptor read/64, error -62
+<6>usb 1-3: new full speed USB device using pxa27x-ohci and address 3
+<3>usb 1-3: device descriptor read/64, error -62
+<4>IP-Config: Complete:
+<4>      device=usb0, addr=169.254.1.11, mask=255.255.255.254, gw=169.254.1.10,
+<4>     host=ezx, domain=, nis-domain=(none),
+<4>     bootserver=169.254.1.10, rootserver=169.254.1.10, rootpath=
+<6>kjournald starting.  Commit interval 5 seconds
+<4>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
+<6>EXT3 FS on mmcblk0p2, internal journal
+<6>EXT3-fs: recovery complete.
+<6>EXT3-fs: mounted filesystem with ordered data mode.
+<4>VFS: Mounted root (ext3 filesystem).
+<6>Freeing init memory: 84K
+<3>usb 1-3: device descriptor read/64, error -110
+<6>usb 1-3: new full speed USB device using pxa27x-ohci and address 4
+<3>usb 1-3: device descriptor read/8, error -62
+<4>usb 1-3: config 1 has an invalid interface number: 13 but max is 2
+<4>usb 1-3: config 1 has an invalid interface number: 6 but max is 2
+<4>usb 1-3: config 1 has an invalid interface number: 7 but max is 2
+<4>usb 1-3: config 1 has no interface number 0
+<4>usb 1-3: config 1 has no interface number 1
+<4>usb 1-3: config 1 has no interface number 2
+<6>usb 1-3: configuration #1 chosen from 1 choice
+<4>usb_ipc_probe: completed probe!
+<6>drivers/char/ts0710_mux_usb.c: usb_ipc_probe: Only two endpoints supported.
+<4>usb ipc: probe of 1-3:1.6 failed with error -1
+<6>drivers/char/ts0710_mux_usb.c: usb_ipc_probe: Only two endpoints supported.
+<4>usb ipc: probe of 1-3:1.7 failed with error -1
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 7 bytes.
+<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 17 bytes.
+<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 7 bytes.
+<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 2009 bytes from ts0710_mux_usb inbuf.
+<4>Read 21 bytes.
+<4>Reading max 1988 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 17 bytes.
+<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 7 bytes.
+<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 2009 bytes from ts0710_mux_usb inbuf.
+<4>Read 21 bytes.
+<4>Reading max 1988 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 17 bytes.
+<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 7 bytes.
+<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 2009 bytes from ts0710_mux_usb inbuf.
+<4>Read 21 bytes.
+<4>Reading max 1988 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 17 bytes.
+<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 7 bytes.
+<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 2009 bytes from ts0710_mux_usb inbuf.
+<4>Read 21 bytes.
+<4>Reading max 1988 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 17 bytes.
+<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 7 bytes.
+<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 2009 bytes from ts0710_mux_usb inbuf.
+<4>Read 21 bytes.
+<4>Reading max 1988 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 17 bytes.
+<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 7 bytes.
+<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 17 bytes.
+<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 11 bytes.
+<4>Reading max 2037 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 7 bytes.
+<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 17 bytes.
+<4>Reading max 2031 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 11 bytes.
+<4>Reading max 2037 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 7 bytes.
+<4>Reading max 2041 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 11 bytes.
+<4>Reading max 2037 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 2016 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1984 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1952 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1920 bytes from ts0710_mux_usb inbuf.
+<4>Read 6 bytes.
+<4>Reading max 1914 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1882 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1850 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1818 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1786 bytes from ts0710_mux_usb inbuf.
+<4>Read 6 bytes.
+<4>Reading max 1780 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1748 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1716 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1684 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1652 bytes from ts0710_mux_usb inbuf.
+<4>Read 6 bytes.
+<4>Reading max 1646 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 2016 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1984 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1952 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1920 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1888 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1856 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1824 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1792 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1760 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1728 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1696 bytes from ts0710_mux_usb inbuf.
+<4>Read 16 bytes.
+<4>Reading max 1680 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 2016 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1984 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1952 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1920 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1888 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1856 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1824 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1792 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1760 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1728 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 1696 bytes from ts0710_mux_usb inbuf.
+<4>Read 13 bytes.
+<4>Reading max 1683 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 14 bytes.
+<4>Reading max 2034 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>Read 32 bytes.
+<4>Reading max 2016 bytes from ts0710_mux_usb inbuf.
+<4>Read 2 bytes.
+<4>Reading max 2014 bytes from ts0710_mux_usb inbuf.
+<4>Reading max 2048 bytes from ts0710_mux_usb inbuf.
+<4>nonzero read bulk status received: -104

diff --git a/packages/linux/linux-ezx-2.6.24/patches/e6-eoc.patch b/packages/linux/linux-ezx-2.6.24/patches/e6-eoc.patch
new file mode 100644 (file)
index 0000000..80849bd
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/e6-eoc.patch
@@ -0,0 +1,20 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e6.c       2007-11-24 20:12:15.000000000 -0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c    2007-11-24 20:12:27.000000000 -0200
+@@ -186,8 +186,15 @@
+       },
+ };
+ 
++
++struct platform_device e6_eoc_device = {
++      .name           = "ezx-eoc",
++      .id             = -1,
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &e6_pcap_device,
++      &e6_eoc_device,
+ };
+ 
+ static void __init e6_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/e6-mci.patch b/packages/linux/linux-ezx-2.6.24/patches/e6-mci.patch
new file mode 100644 (file)
index 0000000..6204680
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/e6-mci.patch
@@ -0,0 +1,124 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e6.c
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c
+@@ -13,6 +13,8 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/fb.h>
++#include <linux/mmc/host.h>
++#include <linux/irq.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -20,12 +22,102 @@
+ #include <asm/arch/pxafb.h>
+ #include <asm/arch/ezx.h>
+ #include <asm/arch/ezx-pcap.h>
++#include <asm/arch/mmc.h>
+ 
+ #include "generic.h"
+ 
+ extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
+ extern void ezx_backlight_power(int);
+ 
++#ifdef CONFIG_EZX_PCAP
++extern int ezx_pcap_mmcsd_power(int);
++extern void ezx_pcap_mmcsd_voltage(u_int32_t);
++#else
++#define ezx_pcap_mmcsd_voltage(x) {}
++#define ezx_pcap_mmcsd_power(x) {}
++#endif
++
++static struct pxamci_platform_data e6_mci_platform_data;
++
++static u_int8_t mmc_voltage[] = {
++      [ilog2(MMC_VDD_165_195)] = 6,
++      [ilog2(MMC_VDD_20_21)] = 7,
++      [ilog2(MMC_VDD_21_22)] = 8,
++      [ilog2(MMC_VDD_22_23)] = 8,
++      [ilog2(MMC_VDD_23_24)] = 9,
++      [ilog2(MMC_VDD_24_25)] = 9,
++      [ilog2(MMC_VDD_25_26)] = 10,
++      [ilog2(MMC_VDD_26_27)] = 10,
++      [ilog2(MMC_VDD_27_28)] = 11,
++      [ilog2(MMC_VDD_28_29)] = 11,
++      [ilog2(MMC_VDD_29_30)] = 12,
++      [ilog2(MMC_VDD_30_31)] = 12,
++      [ilog2(MMC_VDD_31_32)] = 13,
++      [ilog2(MMC_VDD_32_33)] = 13,
++      [ilog2(MMC_VDD_33_34)] = 14,
++      [ilog2(MMC_VDD_34_35)] = 14,
++      [ilog2(MMC_VDD_35_36)] = 15,
++};
++
++static int e6_mci_init(struct device *dev,
++                       irqreturn_t (*ezx_detect_int)(int, void *),
++                       void *data)
++{
++       int err;
++
++       /* Setup GPIO for PXA27x MMC/SD controller */
++       pxa_gpio_mode(GPIO32_MMCCLK_MD);
++       pxa_gpio_mode(GPIO112_MMCCMD_MD);
++       pxa_gpio_mode(GPIO92_MMCDAT0_MD);
++       pxa_gpio_mode(GPIO109_MMCDAT1_MD);
++       pxa_gpio_mode(GPIO110_MMCDAT2_MD);
++       pxa_gpio_mode(GPIO111_MMCDAT3_MD);
++
++       ezx_pcap_mmcsd_power(1);
++
++       e6_mci_platform_data.detect_delay = msecs_to_jiffies(250);
++
++       err = request_irq(0x49, ezx_detect_int, IRQF_DISABLED,
++                       "MMC card detect", data);
++       if (err) {
++               printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request "
++                       "MMC card detect IRQ\n");
++               return -1;
++       }
++
++       set_irq_type(0x0b, IRQT_BOTHEDGE);
++
++       return 0;
++}
++
++static void e6_mci_setpower(struct device *dev, unsigned int vdd)
++{
++      struct pxamci_platform_data* p_d = dev->platform_data;
++
++      if (( 1 << vdd) & p_d->ocr_mask)
++              ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]);
++
++      ezx_pcap_mmcsd_power(1);
++}
++
++static void e6_mci_exit(struct device *dev, void *data)
++{
++      ezx_pcap_mmcsd_power(0);
++      free_irq(0x49, data);
++}
++
++static struct pxamci_platform_data e6_mci_platform_data = {
++      .ocr_mask       = MMC_VDD_165_195|MMC_VDD_20_21|MMC_VDD_21_22
++                        |MMC_VDD_22_23|MMC_VDD_23_24|MMC_VDD_24_25
++                        |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28
++                        |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31
++                        |MMC_VDD_31_32|MMC_VDD_32_33|MMC_VDD_33_34
++                        |MMC_VDD_34_35|MMC_VDD_35_36,
++      .init           = e6_mci_init,
++      .setpower       = e6_mci_setpower,
++      .exit           = e6_mci_exit,
++};
++
+ static struct pxafb_mode_info mode_e6 = {
+       .pixclock = 192308,
+       .xres = 240,
+@@ -101,6 +193,7 @@
+ static void __init e6_init(void)
+ {
+       set_pxa_fb_info(&e6_fb_info);
++      pxa_set_mci_info(&e6_mci_platform_data);
+ 
+       platform_add_devices(devices, ARRAY_SIZE(devices));
+ }

diff --git a/packages/linux/linux-ezx-2.6.24/patches/e6-pcap.patch b/packages/linux/linux-ezx-2.6.24/patches/e6-pcap.patch
new file mode 100644 (file)
index 0000000..656f5a3
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/e6-pcap.patch
@@ -0,0 +1,66 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e6.c
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c
+@@ -19,6 +19,7 @@
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/pxafb.h>
+ #include <asm/arch/ezx.h>
++#include <asm/arch/ezx-pcap.h>
+ 
+ #include "generic.h"
+ 
+@@ -48,7 +49,53 @@
+       .pxafb_lcd_power = &ezx_lcd_power,
+ };
+ 
++/* PCAP */
++static int e6_pcap_init(void)
++{
++      /* FIXME */
++      ezx_pcap_write(PCAP_REG_INT_SEL, 0x0); /* wrong */
++      ezx_pcap_write(PCAP_REG_SWCTRL, 0x2ee6); /* partially wrong */
++      ezx_pcap_write(PCAP_REG_VREG1, 0x15778e3); /* wrong */
++      ezx_pcap_write(PCAP_REG_VREG2, 0x810234); /* partially wrong */
++      ezx_pcap_write(PCAP_REG_AUXVREG, 0x1024bec); /* wrong */
++      ezx_pcap_write(PCAP_REG_PWR, 0x94108); /* partially wrong */
++      ezx_pcap_write(PCAP_REG_AUXVREG_MASK, 0x214d48); /* wrong */
++      ezx_pcap_write(PCAP_REG_BUSCTRL, 0x2a0); /* wrong */
++      ezx_pcap_write(PCAP_REG_LOWPWR, 0x1d9610c);
++      ezx_pcap_write(PCAP_REG_PERIPH, 0x0); /* wrong */
++      ezx_pcap_write(PCAP_REG_GP, 0x107); /* probably unnecessary */
++
++      return 0;
++}
++
++static struct pcap_platform_data e6_pcap_platform_data = {
++      .port           = 1,
++      .cs             = GPIO_SPI_CE,
++      .flags          = PCAP_CS_AH | PCAP_MCI_SD,
++      .clk            = 1,
++      .init           = e6_pcap_init,
++};
++
++static struct resource e6_pcap_resources[] = {
++      [0] = {
++              .start          = IRQ_GPIO1,
++              .end            = IRQ_GPIO1,
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++struct platform_device e6_pcap_device = {
++      .name           = "ezx-pcap",
++      .id             = -1,
++      .num_resources  = ARRAY_SIZE(e6_pcap_resources),
++      .resource       = e6_pcap_resources,
++      .dev            = {
++              .platform_data = &e6_pcap_platform_data,
++      },
++};
++
+ static struct platform_device *devices[] __initdata = {
++      &e6_pcap_device,
+ };
+ 
+ static void __init e6_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/e6-ts.patch b/packages/linux/linux-ezx-2.6.24/patches/e6-ts.patch
new file mode 100644 (file)
index 0000000..f79f866
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/e6-ts.patch
@@ -0,0 +1,39 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e6.c       2007-11-24 20:12:27.000000000 -0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c    2007-11-24 20:12:44.000000000 -0200
+@@ -192,9 +192,34 @@
+       .id             = -1,
+ };
+ 
++/* PCAP_TS */
++struct resource pcap_ts_resources[] = {
++      [0] = {
++              .start          = EZX_IRQ_ADCDONE,
++              .end            = EZX_IRQ_ADCDONE,
++              .flags          = IORESOURCE_IRQ,
++      },
++      [1] = {
++              .start          = EZX_IRQ_TS,
++              .end            = EZX_IRQ_TS,
++              .flags          = IORESOURCE_IRQ,
++      }
++};
++
++struct platform_device pcap_ts_device = {
++      .name           = "pcap-ts",
++      .id             = -1,
++      .dev            = {
++              .parent = &e6_pcap_device.dev,
++      },
++      .num_resources  = ARRAY_SIZE(pcap_ts_resources),
++      .resource       = pcap_ts_resources,
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &e6_pcap_device,
+       &e6_eoc_device,
++      &pcap_ts_device,
+ };
+ 
+ static void __init e6_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/e680-emu.patch b/packages/linux/linux-ezx-2.6.24/patches/e680-emu.patch
new file mode 100644 (file)
index 0000000..6302bba
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/e680-emu.patch
@@ -0,0 +1,38 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c     2007-10-24 20:01:32.000000000 +0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c  2007-10-24 20:01:37.000000000 +0200
+@@ -212,8 +212,33 @@
+       },
+ };
+ 
++/* EMU */
++static struct resource e680_emu_resources[] = {
++      [0] = {
++              .start          = EZX_IRQ_USB4V,
++              .end            = EZX_IRQ_USB4V,
++              .flags          = IORESOURCE_IRQ,
++      },
++      [1] = {
++              .start          = EZX_IRQ_USB1V,
++              .end            = EZX_IRQ_USB1V,
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++struct platform_device e680_emu_device = {
++      .name           = "ezx-emu",
++      .id             = -1,
++      .dev            = {
++              .parent         = &e680_pcap_device.dev,
++      },
++      .num_resources  = ARRAY_SIZE(e680_emu_resources),
++      .resource       = e680_emu_resources,
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &e680_pcap_device,
++      &e680_emu_device,
+ };
+ 
+ static void __init e680_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/e680-kbd.patch b/packages/linux/linux-ezx-2.6.24/patches/e680-kbd.patch
new file mode 100644 (file)
index 0000000..c313ec1
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/e680-kbd.patch
@@ -0,0 +1,93 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c
+@@ -15,6 +15,7 @@
+ #include <linux/fb.h>
+ #include <linux/mmc/host.h>
+ #include <linux/irq.h>
++#include <linux/input.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -23,11 +24,13 @@
+ #include <asm/arch/ezx.h>
+ #include <asm/arch/ezx-pcap.h>
+ #include <asm/arch/mmc.h>
++#include <asm/arch/kbd.h>
+ 
+ #include "generic.h"
+ 
+ extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
+ extern void ezx_backlight_power(int);
++extern void __init pxa_set_kbd_info(struct pxakbd_platform_data *);
+ 
+ #ifdef CONFIG_EZX_PCAP
+ extern int ezx_pcap_mmcsd_power(int);
+@@ -236,6 +239,58 @@
+       .resource       = e680_emu_resources,
+ };
+ 
++static unsigned char e680_keycode[] = {
++       /* row 0 */
++       KEY_UP, KEY_RIGHT, KEY_RESERVED, KEY_PHONE,
++       /* row 1 */
++       KEY_DOWN, KEY_LEFT, KEY_VOLUMEUP, KEY_VOLUMEDOWN,
++       /* row 2 */
++       KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_KPENTER,
++};
++
++static unsigned char e680_direct_keycode[] = {
++       KEY_CAMERA,
++       KEY_RESERVED,
++       KEY_RESERVED,
++       KEY_HOME,
++       KEY_POWER,
++       KEY_MENU,
++};
++
++static int e680_kbd_init(void)
++{
++      pxa_gpio_mode(93 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<0>, VR Key */
++      pxa_gpio_mode(96 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<3>, GAME_A */
++      pxa_gpio_mode(97 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<4>, power key */
++      pxa_gpio_mode(98 | GPIO_ALT_FN_1_IN);  /* KP_DKIN<5>, GAME_B */
++      pxa_gpio_mode(100 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<0> */
++      pxa_gpio_mode(101 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<1> */
++      pxa_gpio_mode(102 | GPIO_ALT_FN_1_IN);  /* KP_MKIN<2> */
++      pxa_gpio_mode(103 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<0> */
++      pxa_gpio_mode(104 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<1> */
++      pxa_gpio_mode(105 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<2> */
++      pxa_gpio_mode(106 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<3> */
++      pxa_gpio_mode(GPIO_TC_MM_EN);
++      GPDR(GPIO_TC_MM_EN)   |= GPIO_bit(GPIO_TC_MM_EN);
++      GPSR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
++      PGSR3 |= GPIO_bit(GPIO_TC_MM_EN);
++      return 0;
++}
++
++static struct pxakbd_platform_data e680_kbd_platform_data = {
++       .init           = &e680_kbd_init,
++       .scan_interval  = HZ/40,
++       .matrix         = {
++               .keycode = e680_keycode,
++               .cols   = 4,
++               .rows   = 3,
++       },
++       .direct         = {
++               .keycode = e680_direct_keycode,
++               .num    = 6,
++       },
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &e680_pcap_device,
+       &e680_emu_device,
+@@ -256,6 +311,7 @@
+ 
+       set_pxa_fb_info(&e680_fb_info);
+       pxa_set_mci_info(&e680_mci_platform_data);
++      pxa_set_kbd_info(&e680_kbd_platform_data);
+ 
+       /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
+       pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);

diff --git a/packages/linux/linux-ezx-2.6.24/patches/e680-leds.patch b/packages/linux/linux-ezx-2.6.24/patches/e680-leds.patch
new file mode 100644 (file)
index 0000000..9de1f0f
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/e680-leds.patch
@@ -0,0 +1,300 @@
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+Index: linux-2.6.24/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.24.orig/drivers/leds/Kconfig
++++ linux-2.6.24/drivers/leds/Kconfig
+@@ -130,6 +130,13 @@
+         This option enables support for the LEDs on the
+         Motorola A780 GSM Phone.
+ 
++config LEDS_E680
++      tristate "LED Support for the Motorola E680(i) GSM Phone"
++      depends on LEDS_CLASS && PXA_EZX_E680
++      help
++        This options enables support for the LEDs on the
++        Motorola E680(i) GSM Phone.
++
+ config LEDS_TRIGGER_TIMER
+       tristate "LED Timer Trigger"
+       depends on LEDS_TRIGGERS
+Index: linux-2.6.24/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.24.orig/drivers/leds/Makefile
++++ linux-2.6.24/drivers/leds/Makefile
+@@ -20,6 +20,7 @@
+ obj-$(CONFIG_LEDS_GPIO)                       += leds-gpio.o
+ obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
+ obj-$(CONFIG_LEDS_A780)               += leds-a780.o
++obj-$(CONFIG_LEDS_E680)               += leds-e680.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)      += ledtrig-timer.o
+Index: linux-2.6.24/drivers/leds/leds-e680.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/leds/leds-e680.c
+@@ -0,0 +1,235 @@
++/*
++ * EZX Platform LED Driver for the Motorola E680(i) GSM Phone
++ *
++ * Copyright 2006 Vanille-Media
++ *
++ * Author: Michael Lauer <mickey@Vanille.de>
++ *
++ * Based on the Motorola 2.4 leds-e680.c and leds-corgi.c by Richard Purdie
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/delay.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <asm/mach-types.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/ezx-pcap.h>
++
++//FIXME move defines to a common header file
++#define IND_CNTL_R_BUL     46
++#define IND_CNTL_G_BUL     47
++#define SSP_PCAP_LED_MASK  0x000fffe0
++#define SSP_PCAP_LED_SHIFT 5
++#define GPIO_TC_MM_EN      99
++
++extern int ezx_pcap_read(u_int8_t, u_int32_t *);
++extern int ezx_pcap_write(u_int8_t, u_int32_t);
++
++typedef struct {
++      u_int8_t ind_GPIO_red;    /*Indicator Red control GPIO 46: 0 active, 1 inactive */
++      u_int8_t ind_GPIO_green;  /*Indicator Green control GPIO 47: 0 inactive, 1 active */
++      u_int8_t pcap_LEDR_en;    /*pcap LEDR_EN bit value: 1 =Red LED(&Green) sink circuit enabled*/
++      u_int8_t pcap_LEDG_en;    /*pcap LEDG_EN bit value:1 =Green(->Blue)LED sink circuit enabled*/
++      u_int8_t pcap_LEDR_CTRL; /* 4bits Sets the timing for the red(&Green) LED sink circuit*/
++      u_int8_t pcap_LEDG_CTRL; /* 4bits Sets the timing for the GREEN (->Blue) LED sink circuit*/
++      u_int8_t pcap_LEDR_I;   /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDR*/
++      u_int8_t pcap_LEDG_I;   /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDG*/
++//    u_int8_t pcap_SKIP_on;  /*1=The ON timing sequence defined by LEDx_CTRL is executed on every other cycle*/
++} PCAP2_LED_REGISTER_VALUE;
++
++const PCAP2_LED_REGISTER_VALUE led_register_value[]=
++{
++      {0x1,0x0, 0x0,0x0, 0x0,0x0, 0x1,0x0}, /* 0 OFF */
++
++      {0x0,0x0, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 1 RED */
++      {0x1,0x1, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 2 GREEN */
++      {0x0,0x1, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 3 ORANGE */
++      {0x1,0x0, 0x0,0x1, 0x0,0xf, 0x0,0x0}, /* 4 BLUE */
++      {0x0,0x0, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 5 MAGENTA */
++      {0x1,0x1, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 6 CYAN */
++      {0x0,0x1, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 7 WHITE */
++};
++
++static void e680led_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++      unsigned int tempValue;
++      unsigned char gpio_red, gpio_green, ledr_en, ledg_en, ledr_ctrl,
++                      ledg_ctrl, ledr_i, ledg_i, skip, t, color;
++      unsigned char t_mask[2] = { 0xc, 0xc };
++
++      skip = 0;
++      if (value & 128) {
++              value &= (~128);
++              skip = 1;
++      }
++
++      /* 7 colors - simple on */
++      if (value <= 7)
++              color = value;
++      /* 4 colors - 11 timed on */
++      else if (value <= 51) {
++              value -= 7;
++              color = ((value-1)%4)+1;
++              t = ((value-1)/4)+1;
++              t_mask[0] = t;
++              t_mask[1] = t;
++      }
++      /* 3 colors - 22 change color */
++      else if (value <= 84) {
++              value -= 51;
++              color = ((value-1)%3)+5;
++              t = ((value-1)/3)+1;
++              t_mask[1] = t;
++      }
++      else if (value <= 117) {
++              value -= 84;
++              color = ((value-1)%3)+5;
++              t = ((value-1)/3)+1;
++              t_mask[0] = t;
++      }
++      /* 3 colors - alternate with blue */
++      else if (value <= 120) {
++              color = value-113;
++              t_mask[0] = 0xa;
++              t_mask[1] = 0xb;
++      }
++      /* invalid value */
++      else
++              color = 1;
++
++      gpio_red   = led_register_value[color].ind_GPIO_red;
++      gpio_green = led_register_value[color].ind_GPIO_green;
++      ledr_en    = led_register_value[color].pcap_LEDR_en;
++      ledg_en    = led_register_value[color].pcap_LEDG_en;
++      ledr_ctrl  = led_register_value[color].pcap_LEDR_CTRL & t_mask[0];
++      ledg_ctrl  = led_register_value[color].pcap_LEDG_CTRL & t_mask[1];
++      ledr_i     = led_register_value[color].pcap_LEDR_I;
++      ledg_i     = led_register_value[color].pcap_LEDG_I;
++
++      ezx_pcap_read(PCAP_REG_PERIPH,&tempValue);
++
++      tempValue &= (~SSP_PCAP_LED_MASK);
++
++      pxa_gpio_set_value(IND_CNTL_R_BUL, gpio_red);
++      pxa_gpio_set_value(IND_CNTL_G_BUL, gpio_green);
++
++      /* Write PCAP LED Peripheral Control Register*/
++      tempValue = ((ledr_en | (ledg_en << 1) | (ledr_ctrl << 2) |
++              (ledg_ctrl << 6) | (ledr_i << 10) | (ledg_i << 12) |
++              (skip << 14)) & 0x7fff) << SSP_PCAP_LED_SHIFT;
++
++      ezx_pcap_write(PCAP_REG_PERIPH,tempValue);
++}
++
++static void e680led_keypad_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++      /* this is not working yet, as there is something else missing */
++#if 0
++      printk( KERN_DEBUG "e680led_keypad_set: %d\n", value );
++
++      pxa_gpio_mode(GPIO_TC_MM_EN);
++      GPDR(GPIO_TC_MM_EN)   |= GPIO_bit(GPIO_TC_MM_EN);
++      GPSR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
++
++      udelay( 100 );
++
++    if ( value ) {
++              GPCR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
++              PGSR3 &= ~GPIO_bit(GPIO_TC_MM_EN);
++    } else {
++              GPSR(GPIO_TC_MM_EN)   = GPIO_bit(GPIO_TC_MM_EN);
++              PGSR3 |= GPIO_bit(GPIO_TC_MM_EN);
++    }
++#endif
++}
++
++static struct led_classdev e680_led = {
++      .name                   = "e680:led",
++      .default_trigger        = "none",
++      .brightness_set         = e680led_set,
++};
++
++static struct led_classdev e680_keypad = {
++      .name                   = "e680:keypad",
++      .default_trigger        = "none",
++      .brightness_set         = e680led_keypad_set,
++};
++
++#ifdef CONFIG_PM
++static int e680led_suspend(struct platform_device *dev, pm_message_t state)
++{
++      led_classdev_suspend(&e680_led);
++      led_classdev_suspend(&e680_keypad);
++      return 0;
++}
++
++static int e680led_resume(struct platform_device *dev)
++{
++      led_classdev_resume(&e680_led);
++      led_classdev_resume(&e680_keypad);
++      return 0;
++}
++#endif
++
++static int e680led_probe(struct platform_device *pdev)
++{
++      int ret;
++
++      /* configure GPIOs as output */
++      pxa_gpio_mode(IND_CNTL_R_BUL | GPIO_OUT);
++      pxa_gpio_mode(IND_CNTL_G_BUL | GPIO_OUT);
++
++      ret = led_classdev_register(&pdev->dev, &e680_led);
++      if (ret < 0)
++              return ret;
++
++      ret = led_classdev_register(&pdev->dev, &e680_keypad);
++      if (ret < 0) {
++              led_classdev_unregister(&e680_led);
++      }
++      return ret;
++}
++
++static int e680led_remove(struct platform_device *pdev)
++{
++      led_classdev_unregister(&e680_led);
++      led_classdev_unregister(&e680_keypad);
++      return 0;
++}
++
++static struct platform_driver e680led_driver = {
++      .probe          = e680led_probe,
++      .remove         = e680led_remove,
++#ifdef CONFIG_PM
++      .suspend        = e680led_suspend,
++      .resume         = e680led_resume,
++#endif
++      .driver         = {
++              .name           = "e680-led",
++      },
++};
++
++static int __init e680led_init(void)
++{
++      return platform_driver_register(&e680led_driver);
++}
++
++static void __exit e680led_exit(void)
++{
++      platform_driver_unregister(&e680led_driver);
++}
++
++module_init(e680led_init);
++module_exit(e680led_exit);
++
++MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
++MODULE_DESCRIPTION("Motorola E680 LED driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx-e680.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/ezx-e680.c
++++ linux-2.6.24/arch/arm/mach-pxa/ezx-e680.c
+@@ -337,11 +337,20 @@
+        },
+ };
+ 
++static struct platform_device e680led_device = {
++      .name           = "e680-led",
++      .id             = -1,
++      .dev            = {
++              .parent = &e680_pcap_device.dev,
++      },
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &e680_pcap_device,
+       &e680_emu_device,
+       &pcap_ts_device,
+       &e680locksw_device,
++      &e680led_device,
+ };
+ 
+ static void __init e680_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/e680-locksw.patch b/packages/linux/linux-ezx-2.6.24/patches/e680-locksw.patch
new file mode 100644 (file)
index 0000000..6bb6687
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/e680-locksw.patch
@@ -0,0 +1,45 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c     2007-10-24 18:58:55.000000000 +0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c  2007-10-24 18:59:23.000000000 +0200
+@@ -16,6 +16,7 @@
+ #include <linux/mmc/host.h>
+ #include <linux/irq.h>
+ #include <linux/input.h>
++#include <linux/gpio_keys.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -315,10 +316,32 @@
+       .resource       = pcap_ts_resources,
+ };
+ 
++static struct gpio_keys_button e680locksw_buttons[] = {
++       [0] = {
++               .code        = KEY_SLEEP,
++               .gpio           = GPIO_LOCK_SCREEN_PIN,
++               .desc           = "E680 lockscreen sw",
++       },
++};
++
++static struct gpio_keys_platform_data e680locksw_platform_data = {
++       .buttons        = e680locksw_buttons,
++       .nbuttons       = 1,
++};
++
++static struct platform_device e680locksw_device = {
++       .name           = "gpio-keys",
++       .id             = -1,
++       .dev            = {
++               .platform_data  = &e680locksw_platform_data,
++       },
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &e680_pcap_device,
+       &e680_emu_device,
+       &pcap_ts_device,
++      &e680locksw_device,
+ };
+ 
+ static void __init e680_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/e680-mci.patch b/packages/linux/linux-ezx-2.6.24/patches/e680-mci.patch
new file mode 100644 (file)
index 0000000..0cea75d
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/e680-mci.patch
@@ -0,0 +1,126 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c
+@@ -13,6 +13,8 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/fb.h>
++#include <linux/mmc/host.h>
++#include <linux/irq.h>
+ 
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -20,12 +22,104 @@
+ #include <asm/arch/pxafb.h>
+ #include <asm/arch/ezx.h>
+ #include <asm/arch/ezx-pcap.h>
++#include <asm/arch/mmc.h>
+ 
+ #include "generic.h"
+ 
+ extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
+ extern void ezx_backlight_power(int);
+ 
++#ifdef CONFIG_EZX_PCAP
++extern int ezx_pcap_mmcsd_power(int);
++extern void ezx_pcap_mmcsd_voltage(u_int32_t);
++#else
++#define ezx_pcap_mmcsd_voltage(x) {}
++#define ezx_pcap_mmcsd_power(x) {}
++#endif
++
++static struct pxamci_platform_data e680_mci_platform_data;
++
++static u_int8_t mmc_voltage[] = {
++      [ilog2(MMC_VDD_165_195)] = 3,
++      [ilog2(MMC_VDD_20_21)] = 3,
++      [ilog2(MMC_VDD_21_22)] = 3,
++      [ilog2(MMC_VDD_22_23)] = 3,
++      [ilog2(MMC_VDD_23_24)] = 3,
++      [ilog2(MMC_VDD_24_25)] = 3,
++      [ilog2(MMC_VDD_25_26)] = 3,
++      [ilog2(MMC_VDD_26_27)] = 3,
++      [ilog2(MMC_VDD_27_28)] = 3,
++      [ilog2(MMC_VDD_28_29)] = 3,
++      [ilog2(MMC_VDD_29_30)] = 3,
++      [ilog2(MMC_VDD_30_31)] = 3,
++      [ilog2(MMC_VDD_31_32)] = 3,
++      [ilog2(MMC_VDD_32_33)] = 3,
++      [ilog2(MMC_VDD_33_34)] = 3,
++      [ilog2(MMC_VDD_34_35)] = 3,
++      [ilog2(MMC_VDD_35_36)] = 3,
++};
++
++static int e680_mci_init(struct device *dev,
++                       irqreturn_t (*ezx_detect_int)(int, void *),
++                       void *data)
++{
++       int err;
++
++       /* Setup GPIO for PXA27x MMC/SD controller */
++       pxa_gpio_mode(GPIO32_MMCCLK_MD);
++       pxa_gpio_mode(GPIO112_MMCCMD_MD);
++       pxa_gpio_mode(GPIO92_MMCDAT0_MD);
++       pxa_gpio_mode(GPIO109_MMCDAT1_MD);
++       pxa_gpio_mode(GPIO110_MMCDAT2_MD);
++       pxa_gpio_mode(GPIO111_MMCDAT3_MD);
++
++       ezx_pcap_mmcsd_power(1);
++
++       e680_mci_platform_data.detect_delay = msecs_to_jiffies(250);
++
++       err = request_irq(0x49, ezx_detect_int, IRQF_DISABLED,
++                       "MMC card detect", data);
++       if (err) {
++               printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request "
++                       "MMC card detect IRQ\n");
++               return -1;
++       }
++
++       set_irq_type(0x0b, IRQT_BOTHEDGE);
++
++       return 0;
++}
++
++
++static inline int e680_mci_get_ro(struct device *dev)
++{
++        return (GPLR3 & 0x800);
++}
++
++static void e680_mci_setpower(struct device *dev, unsigned int vdd)
++{
++      struct pxamci_platform_data* p_d = dev->platform_data;
++
++      if (( 1 << vdd) & p_d->ocr_mask)
++              ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]);
++
++      ezx_pcap_mmcsd_power(1);
++}
++
++static void e680_mci_exit(struct device *dev, void *data)
++{
++      ezx_pcap_mmcsd_power(0);
++      free_irq(0x49, data);
++}
++
++static struct pxamci_platform_data e680_mci_platform_data = {
++      .ocr_mask       = MMC_VDD_27_28,
++      .init           = e680_mci_init,
++      .get_ro         = e680_mci_get_ro,
++      .setpower       = e680_mci_setpower,
++      .exit           = e680_mci_exit,
++};
++
+ static struct pxafb_mode_info mode_e680 = {
+       .pixclock       = 150000,
+       .xres           = 240,
+@@ -136,6 +230,7 @@
+       PSLR  = 0x05800f00;
+ 
+       set_pxa_fb_info(&e680_fb_info);
++      pxa_set_mci_info(&e680_mci_platform_data);
+ 
+       /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
+       pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);

diff --git a/packages/linux/linux-ezx-2.6.24/patches/e680-pcap.patch b/packages/linux/linux-ezx-2.6.24/patches/e680-pcap.patch
new file mode 100644 (file)
index 0000000..a02ccb4
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/e680-pcap.patch
@@ -0,0 +1,90 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c     2007-11-24 20:09:00.000000000 -0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c  2007-11-24 20:09:46.000000000 -0200
+@@ -19,6 +19,7 @@
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/pxafb.h>
+ #include <asm/arch/ezx.h>
++#include <asm/arch/ezx-pcap.h>
+ 
+ #include "generic.h"
+ 
+@@ -48,7 +49,77 @@
+       .pxafb_lcd_power = &ezx_lcd_power,
+ };
+ 
++/* PCAP */
++static int e680_pcap_init(void)
++{
++      /* initialize PCAP registers */
++      /* set SW1 sleep to keep SW1 1.3v in sync mode */
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE10, 0);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE11, 0);
++
++      /*  SW1 active in sync mode */
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE00, 1);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE01, 0);
++
++      /*  at SW1 -core voltage to 1.30V   */
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW10_DVS, 1);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW11_DVS, 1);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW12_DVS, 1);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW13_DVS, 0);
++
++      /* when STANDY2 PIN ACTIVE (high) set V3-- sram V8 -- pll off  */
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_STBY, 1);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_LOWPWR, 0);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_STBY, 1);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_LOWPWR, 0);
++
++      /*
++       * when STANDY2 PIN ACTIVE (high) set V4-- lcd only for e680 V6 ---
++       * camera for e680
++       */
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_STBY, 1);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_LOWPWR, 1);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_STBY, 1);
++      ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_LOWPWR, 0);
++
++      /* set Vc to low power mode when AP sleep */
++//    SSP_PCAP_bit_set( PCAP_BIT_LOWPWR_CTRL_VC_STBY);
++
++      /* set VAUX2 to low power mode when AP sleep */
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_STBY, 1);
++      ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_LOWPWR, 1);
++
++      return 0;
++}
++
++static struct pcap_platform_data e680_pcap_platform_data = {
++      .port           = 1,
++      .cs             = GPIO_SPI_CE,
++      .flags          = PCAP_MCI_SD,
++      .clk            = 1,
++      .init           = e680_pcap_init,
++};
++
++static struct resource e680_pcap_resources[] = {
++      [0] = {
++              .start          = IRQ_GPIO1,
++              .end            = IRQ_GPIO1,
++              .flags          = IORESOURCE_IRQ,
++      },
++};
++
++struct platform_device e680_pcap_device = {
++      .name           = "ezx-pcap",
++      .id             = -1,
++      .num_resources  = ARRAY_SIZE(e680_pcap_resources),
++      .resource       = e680_pcap_resources,
++      .dev            = {
++              .platform_data = &e680_pcap_platform_data,
++      },
++};
++
+ static struct platform_device *devices[] __initdata = {
++      &e680_pcap_device,
+ };
+ 
+ static void __init e680_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/e680-ts.patch b/packages/linux/linux-ezx-2.6.24/patches/e680-ts.patch
new file mode 100644 (file)
index 0000000..2350b2d
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/e680-ts.patch
@@ -0,0 +1,39 @@
+Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c
+===================================================================
+--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c     2007-10-24 20:01:49.000000000 +0200
++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c  2007-10-24 20:01:58.000000000 +0200
+@@ -291,9 +291,34 @@
+        },
+ };
+ 
++/* PCAP_TS */
++struct resource pcap_ts_resources[] = {
++      [0] = {
++              .start          = EZX_IRQ_ADCDONE2,
++              .end            = EZX_IRQ_ADCDONE2,
++              .flags          = IORESOURCE_IRQ,
++      },
++      [1] = {
++              .start          = EZX_IRQ_TS,
++              .end            = EZX_IRQ_TS,
++              .flags          = IORESOURCE_IRQ,
++      }
++};
++
++struct platform_device pcap_ts_device = {
++      .name           = "pcap-ts",
++      .id             = -1,
++      .dev            = {
++              .parent = &e680_pcap_device.dev,
++      },
++      .num_resources  = ARRAY_SIZE(pcap_ts_resources),
++      .resource       = pcap_ts_resources,
++};
++
+ static struct platform_device *devices[] __initdata = {
+       &e680_pcap_device,
+       &e680_emu_device,
++      &pcap_ts_device,
+ };
+ 
+ static void __init e680_init(void)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-asoc.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-asoc.patch
new file mode 100644 (file)
index 0000000..4ba0f4c
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/ezx-asoc.patch
@@ -0,0 +1,1302 @@
+Index: linux-2.6.24/sound/soc/codecs/pcap2.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/sound/soc/codecs/pcap2.c
+@@ -0,0 +1,796 @@
++/*
++ * pcap2.c - PCAP2 ASIC Audio driver
++ *
++ *    Copyright (C) 2007 Daniel Ribeiro <wyrm@openezx.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/pm.h>
++#include <linux/platform_device.h>
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/soc-dapm.h>
++#include <sound/initval.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/ezx-pcap.h>
++#include <asm/arch/ezx.h>
++#include <asm/arch/hardware.h>
++
++#include "pcap2.h"
++
++#define AUDIO_NAME "pcap2-codec"
++#define PCAP2_VERSION "0.1"
++
++extern int ezx_pcap_write(u_int8_t, u_int32_t);
++extern int ezx_pcap_read(u_int8_t, u_int32_t *);
++static struct snd_soc_device *pcap2_codec_socdev;
++
++/*
++ * Debug
++ */
++
++//#define PCAP2_DEBUG
++
++#ifdef PCAP2_DEBUG
++#define dbg(format, arg...) \
++      printk(KERN_DEBUG AUDIO_NAME ": " format "\n" , ## arg)
++#else
++#define dbg(format, arg...)
++#endif
++
++#define err(format, arg...) \
++      printk(KERN_ERR AUDIO_NAME ": " format "\n" , ## arg)
++#define info(format, arg...) \
++      printk(KERN_INFO AUDIO_NAME ": " format "\n" , ## arg)
++#define warn(format, arg...) \
++      printk(KERN_WARNING AUDIO_NAME ": " format "\n" , ## arg)
++
++#define dump_registers()      pcap2_codec_read(NULL, 13); \
++                              pcap2_codec_read(NULL, 12); \
++                              pcap2_codec_read(NULL, 11); \
++                              pcap2_codec_read(NULL, 26);
++
++
++
++
++/*
++ * ASoC limits register value to 16 bits and pcap uses 32 bit registers
++ * to work around this, we get 16 bits from low, mid or high positions.
++ * ASoC limits register number to 8 bits we use 0x1f for register
++ * number and 0xe0 for register offset. -WM
++ */
++static int pcap2_codec_write(struct snd_soc_codec *codec, unsigned int reg,
++      unsigned int value)
++{
++      unsigned int tmp;
++
++      ezx_pcap_read((reg & 0x1f), &tmp);
++
++      if (reg & SL) {
++              tmp &= 0xffff0000;
++              tmp |= (value & 0xffff);
++      }
++      else if (reg & SM) {
++              tmp &= 0xff0000ff;
++              tmp |= ((value << 8) & 0x00ffff00);
++      }
++      else if (reg & SH) {
++              tmp &= 0xffff;
++              tmp |= ((value << 16) & 0xffff0000);
++      }
++      else
++              tmp = value;
++
++      dbg("codec_write reg=%x, rval=%08x, fval=%08x", reg, tmp,  value);
++      ezx_pcap_write((reg & 0x1f), tmp);
++      return 0;
++
++}
++
++static unsigned int pcap2_codec_read(struct snd_soc_codec *codec, unsigned int reg)
++{
++      unsigned int tmp, ret;
++
++      ezx_pcap_read((reg & 0x1f), &tmp);
++      ret = tmp;
++      if (reg & SL)
++              ret = (tmp & 0xffff);
++      else if (reg & SM)
++              ret = ((tmp >> 8) & 0xffff);
++      else if (reg & SH)
++              ret = ((tmp >> 16) & 0xffff);
++
++      dbg("codec_read  reg=%x, rval=%08x, fval=%08x", reg, tmp, ret);
++      return(ret);
++
++}
++
++static const char *pcap2_output_select[] = {"2ch", "2->1ch", "2->1ch -3db", "2->1ch -6db"};
++
++static const struct soc_enum pcap2_enum[] = {
++SOC_ENUM_SINGLE((PCAP2_OUTPUT_AMP|SH), 3, 4, pcap2_output_select),
++};
++
++static const struct snd_kcontrol_new pcap2_input_mixer_controls[] = {
++SOC_DAPM_SINGLE("A3 Switch", (PCAP2_INPUT_AMP|SL), 6, 1, 0),
++SOC_DAPM_SINGLE("A5 Switch", (PCAP2_INPUT_AMP|SL), 8, 1, 0),
++};
++
++static const struct snd_kcontrol_new pcap2_output_mixer_controls[] = {
++SOC_DAPM_SINGLE("A1 Switch", (PCAP2_OUTPUT_AMP|SL), 0, 1, 0),
++SOC_DAPM_SINGLE("A2 Switch", (PCAP2_OUTPUT_AMP|SL), 1, 1, 0),
++SOC_DAPM_SINGLE("AR Switch", (PCAP2_OUTPUT_AMP|SL), 5, 1, 0),
++SOC_DAPM_SINGLE("AL Switch", (PCAP2_OUTPUT_AMP|SL), 6, 1, 0),
++};
++
++/* pcap2 codec non DAPM controls */
++static const struct snd_kcontrol_new pcap2_codec_snd_controls[] = {
++SOC_SINGLE("Output gain", (PCAP2_OUTPUT_AMP|SM),  5, 15, 0),
++SOC_SINGLE("Input gain", (PCAP2_INPUT_AMP|SL),   0, 31, 0),
++};
++
++static const struct snd_kcontrol_new pcap2_codec_dm_mux_control[] = {
++      SOC_DAPM_ENUM("Output Mode",    pcap2_enum[0]),
++};
++
++/* add non dapm controls */
++static int pcap2_codec_add_controls(struct snd_soc_codec *codec)
++{
++      int err, i;
++
++      for (i = 0; i < ARRAY_SIZE(pcap2_codec_snd_controls); i++) {
++              if ((err = snd_ctl_add(codec->card,
++                              snd_soc_cnew(&pcap2_codec_snd_controls[i],codec, NULL))) < 0)
++                      return err;
++      }
++
++      return 0;
++}
++
++/* pcap2 codec DAPM controls */
++static const struct snd_soc_dapm_widget pcap2_codec_dapm_widgets[] = {
++      SND_SOC_DAPM_DAC("ST_DAC", "ST_DAC playback", SND_SOC_NOPM, 0, 0),
++      SND_SOC_DAPM_DAC("CDC_DAC", "CDC_DAC playback", SND_SOC_NOPM, 0, 0),
++      SND_SOC_DAPM_ADC("CDC_ADC", "CDC_DAC capture", SND_SOC_NOPM, 0, 0),
++      SND_SOC_DAPM_PGA("PGA_ST", (PCAP2_OUTPUT_AMP|SL), 9, 0, NULL, 0),
++      SND_SOC_DAPM_PGA("PGA_CDC", (PCAP2_OUTPUT_AMP|SL), 8, 0, NULL, 0),
++      SND_SOC_DAPM_PGA("PGA_R", (PCAP2_OUTPUT_AMP|SL), 11, 0, NULL, 0),
++      SND_SOC_DAPM_PGA("PGA_L", (PCAP2_OUTPUT_AMP|SL), 12, 0, NULL, 0),
++      SND_SOC_DAPM_MUX("Downmixer", SND_SOC_NOPM, 0, 0, pcap2_codec_dm_mux_control),
++      SND_SOC_DAPM_PGA("PGA_A1CTRL", (PCAP2_OUTPUT_AMP|SH), 1, 1, NULL, 0),
++      SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0, &pcap2_output_mixer_controls[0], ARRAY_SIZE(pcap2_output_mixer_controls)),
++      SND_SOC_DAPM_OUTPUT("A1"), /* Earpiece */
++      SND_SOC_DAPM_OUTPUT("A2"), /* LoudSpeaker */
++      SND_SOC_DAPM_OUTPUT("AR"), /* headset right */
++      SND_SOC_DAPM_OUTPUT("AL"), /* headset left */
++
++      SND_SOC_DAPM_MICBIAS("BIAS1", (PCAP2_INPUT_AMP|SL), 10, 0),
++      SND_SOC_DAPM_MICBIAS("BIAS2", (PCAP2_INPUT_AMP|SL), 11, 0),
++      SND_SOC_DAPM_MIXER("Input Mixer", SND_SOC_NOPM, 0, 0, &pcap2_input_mixer_controls[0], ARRAY_SIZE(pcap2_input_mixer_controls)),
++      SND_SOC_DAPM_INPUT("A3"), /* Headset Mic */
++      SND_SOC_DAPM_INPUT("A5"), /* Builtin Mic */
++};
++
++static const char *audio_map[][3] = {
++      { "A1", NULL, "Output Mixer" },
++      { "A2", NULL, "Output Mixer" },
++      { "AR", NULL, "Output Mixer" },
++      { "AL", NULL, "Output Mixer" },
++
++      { "Output Mixer", "A1 Switch", "PGA_A1CTRL" },
++      { "Output Mixer", "A2 Switch", "Downmixer" },
++      { "Output Mixer", "AR Switch", "PGA_R" },
++      { "Output Mixer", "AL Switch", "PGA_L" },
++
++      { "PGA_A1CTRL", NULL, "Downmixer" },
++
++      { "Downmixer", "2->1ch", "PGA_L" },
++      { "Downmixer", "2->1ch", "PGA_R" },
++      { "Downmixer", "2->1ch -3db", "PGA_L" },
++      { "Downmixer", "2->1ch -3db", "PGA_R" },
++      { "Downmixer", "2->1ch -6db", "PGA_L" },
++      { "Downmixer", "2->1ch -6db", "PGA_R" },
++      { "Downmixer", "2ch", "PGA_R" },
++
++      { "PGA_R", NULL, "PGA_ST" },
++      { "PGA_L", NULL, "PGA_ST" },
++      { "PGA_R", NULL, "PGA_CDC" },
++
++      { "PGA_ST", NULL, "ST_DAC" },
++      { "PGA_CDC", NULL, "CDC_DAC" },
++
++      /* input path */
++      { "BIAS1", NULL, "A3" },
++      { "BIAS2", NULL, "A5" },
++
++      { "Input Mixer", "A3 Switch", "BIAS1" },
++      { "Input Mixer", "A5 Switch", "BIAS2" },
++
++      { "PGA_R", NULL, "Input Mixer" },
++
++      { "PGA_CDC", NULL, "PGA_R" },
++      { "CDC_ADC", NULL, "PGA_CDC" },
++
++      /* terminator */
++      {NULL, NULL, NULL},
++};
++
++static int pcap2_codec_add_widgets(struct snd_soc_codec *codec)
++{
++      int i;
++
++      for(i = 0; i < ARRAY_SIZE(pcap2_codec_dapm_widgets); i++) {
++              snd_soc_dapm_new_control(codec, &pcap2_codec_dapm_widgets[i]);
++      }
++
++      /* set up audio path interconnects */
++      for(i = 0; audio_map[i][0] != NULL; i++) {
++              snd_soc_dapm_connect_input(codec, audio_map[i][0],
++                      audio_map[i][1], audio_map[i][2]);
++      }
++
++      snd_soc_dapm_new_widgets(codec);
++      return 0;
++}
++
++static int pcap2_codec_dapm_event(struct snd_soc_codec *codec, int event)
++{
++      unsigned int input = pcap2_codec_read(codec, PCAP2_INPUT_AMP);
++
++      input &= ~PCAP2_INPUT_AMP_LOWPWR;
++
++      switch (event) {
++      case SNDRV_CTL_POWER_D0:
++      case SNDRV_CTL_POWER_D1:
++      case SNDRV_CTL_POWER_D2:
++      case SNDRV_CTL_POWER_D3hot: /* Off, with power */
++              dbg("dapm: ON\n");
++              break;
++      case SNDRV_CTL_POWER_D3cold: /* Off, without power */
++              input |= PCAP2_INPUT_AMP_LOWPWR;
++              dbg("dapm: OFF\n");
++              break;
++      }
++      codec->dapm_state = event;
++      pcap2_codec_write(codec, PCAP2_INPUT_AMP, input);
++      return 0;
++}
++
++static int pcap2_hw_params(struct snd_pcm_substream *substream,
++                              struct snd_pcm_hw_params *params)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
++      struct snd_soc_codec *codec = codec_dai->codec;
++      unsigned int tmp;
++
++      if (codec_dai->id == PCAP2_STEREO_DAI) {
++              tmp = pcap2_codec_read(codec, PCAP2_ST_DAC);
++
++              tmp &= ~PCAP2_ST_DAC_RATE_MASK;
++              switch(params_rate(params)) {
++              case 8000:
++                      break;
++              case 11025:
++                      tmp |= PCAP2_ST_DAC_RATE_11025;
++                      break;
++              case 12000:
++                      tmp |= PCAP2_ST_DAC_RATE_12000;
++                      break;
++              case 16000:
++                      tmp |= PCAP2_ST_DAC_RATE_16000;
++                      break;
++              case 22050:
++                      tmp |= PCAP2_ST_DAC_RATE_22050;
++                      break;
++              case 24000:
++                      tmp |= PCAP2_ST_DAC_RATE_24000;
++                      break;
++              case 32000:
++                      tmp |= PCAP2_ST_DAC_RATE_32000;
++                      break;
++              case 44100:
++                      tmp |= PCAP2_ST_DAC_RATE_44100;
++                      break;
++              case 48000:
++                      tmp |= PCAP2_ST_DAC_RATE_48000;
++                      break;
++              default:
++                      return -EINVAL;
++              }
++              tmp |= PCAP2_ST_DAC_RESET_DF;
++              pcap2_codec_write(codec, PCAP2_ST_DAC, tmp);
++      }
++      else {
++              tmp = pcap2_codec_read(codec, PCAP2_CODEC);
++
++              tmp &= ~PCAP2_CODEC_RATE_MASK;
++              switch(params_rate(params)) {
++              case 8000:
++                      break;
++              case 16000:
++                      tmp |= PCAP2_CODEC_RATE_16000;
++                      break;
++              default:
++                      return -EINVAL;
++              }
++              tmp |= PCAP2_CODEC_RESET_DF;
++              pcap2_codec_write(codec, PCAP2_CODEC, tmp);
++      }
++
++      return 0;
++}
++
++static int pcap2_hw_free(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
++      struct snd_soc_codec *codec = codec_dai->codec;
++      struct snd_soc_dapm_widget *w;
++      unsigned int tmp;
++
++      if (codec_dai->id == PCAP2_STEREO_DAI) {
++              snd_soc_dapm_set_endpoint(codec, "ST_DAC", 0);
++              tmp = pcap2_codec_read(codec, PCAP2_ST_DAC);
++              tmp &= ~(PCAP2_ST_DAC_EN | PCAP2_ST_DAC_CLK_EN);
++              pcap2_codec_write(codec, PCAP2_ST_DAC, tmp);
++      }
++      else {
++              if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++                      snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 0);
++              else
++                      snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 0);
++              list_for_each_entry(w, &codec->dapm_widgets, list) {
++                      if ((!strcmp(w->name, "CDC_DAC") || !strcmp(w->name, "CDC_ADC")) && w->connected)
++                              goto in_use;
++              }
++              tmp = pcap2_codec_read(codec, PCAP2_CODEC);
++              tmp &= ~(PCAP2_CODEC_EN | PCAP2_CODEC_CLK_EN);
++              pcap2_codec_write(codec, PCAP2_CODEC, tmp);
++      }
++in_use:
++      snd_soc_dapm_sync_endpoints(codec);
++
++      return 0;
++}
++
++static int pcap2_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai,
++              int clk_id, unsigned int freq, int dir)
++{
++      struct snd_soc_codec *codec = codec_dai->codec;
++
++      unsigned int tmp;
++      if (codec_dai->id == PCAP2_STEREO_DAI) {
++              /* ST_DAC */
++
++              tmp = pcap2_codec_read(codec, PCAP2_ST_DAC);
++
++              tmp &= ~PCAP2_ST_DAC_CLKSEL_MASK;
++              switch (clk_id) {
++              case PCAP2_CLK_AP:
++                      tmp |= PCAP2_ST_DAC_CLKSEL_AP;
++                      break;
++              case PCAP2_CLK_BP:
++                      break;
++              default:
++                      return -ENODEV;
++              }
++
++              tmp &= ~PCAP2_ST_DAC_CLK_MASK;
++              switch (freq) {
++              case 13000000:
++                      break;
++/*            case 15M36:
++                      tmp |= PCAP2_ST_DAC_CLK_15M36;
++                      break;
++              case 16M8:
++                      tmp |= PCAP2_ST_DAC_CLK_16M8;
++                      break;
++              case 19M44:
++                      tmp |= PCAP2_ST_DAC_CLK_19M44;
++                      break;
++*/            case 26000000:
++                      tmp |= PCAP2_ST_DAC_CLK_26M;
++                      break;
++/*            case EXT_MCLK:
++                      tmp |= PCAP2_ST_DAC_CLK_MCLK;
++                      break;
++              case FSYNC:
++                      tmp |= PCAP2_ST_DAC_CLK_FSYNC;
++                      break;
++              case BITCLK:
++                      tmp |= PCAP2_ST_DAC_CLK_BITCLK;
++                      break;
++*/            default:
++                      return -EINVAL;
++              }
++              pcap2_codec_write(codec, PCAP2_ST_DAC, tmp);
++      }
++      else {
++              /* MONO_DAC */
++              tmp = pcap2_codec_read(codec, PCAP2_CODEC);
++
++              tmp &= ~PCAP2_CODEC_CLKSEL_MASK;
++              switch (clk_id) {
++              case PCAP2_CLK_AP:
++                      tmp |= PCAP2_CODEC_CLKSEL_AP;
++                      break;
++              case PCAP2_CLK_BP:
++                      break;
++              default:
++                      return -ENODEV;
++              }
++
++              tmp &= ~PCAP2_CODEC_CLK_MASK;
++              switch (freq) {
++              case 13000000:
++                      break;
++/*            case 15M36:
++                      tmp |= PCAP2_CODEC_CLK_15M36;
++                      break;
++              case 16M8:
++                      tmp |= PCAP2_CODEC_CLK_16M8;
++                      break;
++              case 19M44:
++                      tmp |= PCAP2_CODEC_CLK_19M44;
++                      break;
++*/            case 26000000:
++                      tmp |= PCAP2_CODEC_CLK_26M;
++                      break;
++              default:
++                      return -EINVAL;
++              }
++              pcap2_codec_write(codec, PCAP2_CODEC, tmp);
++      }
++      return 0;
++}
++
++static int pcap2_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
++              unsigned int fmt)
++{
++      struct snd_soc_codec *codec = codec_dai->codec;
++      unsigned int tmp = 0;
++
++      if (codec_dai->id == PCAP2_STEREO_DAI) {
++              /* ST_DAC */
++
++              /* disable CODEC */
++              pcap2_codec_write(codec, PCAP2_CODEC, 0);
++
++              switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
++              case SND_SOC_DAIFMT_CBM_CFM:
++                      break;
++              case SND_SOC_DAIFMT_CBS_CFS:
++                      tmp |= 0x1;
++                      break;
++              default:
++                      return -EINVAL;
++              }
++
++              switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
++              case SND_SOC_DAIFMT_I2S:
++                      tmp |= 0x4000;
++                      break;
++/*            case SND_SOC_NET:
++                      tmp |= 0x2000;
++                      break;
++*/            case SND_SOC_DAIFMT_DSP_B:
++                      break;
++              default:
++                      return -EINVAL;
++              }
++
++              switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
++              case SND_SOC_DAIFMT_IB_IF:
++                      break;
++              case SND_SOC_DAIFMT_NB_NF:
++                      tmp |= 0x60000;
++                      break;
++              case SND_SOC_DAIFMT_IB_NF:
++                      tmp |= 0x40000;
++                      break;
++              case SND_SOC_DAIFMT_NB_IF:
++                      tmp |= 0x20000;
++                      break;
++              }
++              /* set dai to AP */
++              tmp |= 0x1000;
++
++              /* set BCLK */
++              tmp |= 0x18000;
++
++              pcap2_codec_write(codec, PCAP2_ST_DAC, tmp);
++      }
++      else {
++              /* MONO_DAC */
++
++              /* disable ST_DAC */
++              pcap2_codec_write(codec, PCAP2_ST_DAC, 0);
++
++              switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
++              case SND_SOC_DAIFMT_CBM_CFM:
++                      break;
++              case SND_SOC_DAIFMT_CBS_CFS:
++                      tmp |= 0x2;
++                      break;
++              default:
++                      return -EINVAL;
++              }
++
++              switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
++              case SND_SOC_DAIFMT_DSP_B:
++                      break;
++              default:
++                      return -EINVAL;
++              }
++
++              switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
++              case SND_SOC_DAIFMT_IB_IF:
++                      break;
++              case SND_SOC_DAIFMT_NB_NF:
++                      tmp |= 0x600;
++                      break;
++              case SND_SOC_DAIFMT_IB_NF:
++                      tmp |= 0x400;
++                      break;
++              case SND_SOC_DAIFMT_NB_IF:
++                      tmp |= 0x200;
++                      break;
++              }
++              if (codec_dai->id == PCAP2_MONO_DAI)
++                      /* set dai to AP */
++                      tmp |= 0x8000;
++
++              tmp |= 0x5; /* IHF / OHF */
++
++              pcap2_codec_write(codec, PCAP2_CODEC, tmp);
++      }
++      return 0;
++}
++
++static int pcap2_prepare(struct snd_pcm_substream *substream)
++{
++
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
++      struct snd_soc_codec *codec = codec_dai->codec;
++      unsigned int tmp;
++      /* FIXME enable clock only if codec is master */
++      if (codec_dai->id == PCAP2_STEREO_DAI) {
++              snd_soc_dapm_set_endpoint(codec, "ST_DAC", 1);
++              snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 0);
++              snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 0);
++              tmp = pcap2_codec_read(codec, PCAP2_ST_DAC);
++              tmp |= (PCAP2_ST_DAC_EN | PCAP2_ST_DAC_CLK_EN);
++              pcap2_codec_write(codec, PCAP2_ST_DAC, tmp);
++      }
++      else {
++              if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
++                      snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 1);
++              else
++                      snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 1);
++              snd_soc_dapm_set_endpoint(codec, "ST_DAC", 0);
++              tmp = pcap2_codec_read(codec, PCAP2_CODEC);
++              tmp |= (PCAP2_CODEC_EN | PCAP2_CODEC_CLK_EN);
++              pcap2_codec_write(codec, PCAP2_CODEC, tmp);
++      }
++      snd_soc_dapm_sync_endpoints(codec);
++      mdelay(1);
++#ifdef PCAP2_DEBUG
++      dump_registers();
++#endif
++      return 0;
++}
++
++/*
++ * Define codec DAI.
++ */
++struct snd_soc_codec_dai pcap2_dai[] = {
++{
++      .name = "PCAP2 MONO",
++      .id = 0,
++      .playback = {
++              .stream_name = "CDC_DAC playback",
++              .channels_min = 1,
++              .channels_max = 1,
++              .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000),
++              .formats = SNDRV_PCM_FMTBIT_S16_LE,
++      },
++      .capture = {
++              .stream_name = "CDC_DAC capture",
++              .channels_min = 1,
++              .channels_max = 1,
++              .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000),
++              .formats = SNDRV_PCM_FMTBIT_S16_LE,
++      },
++      .ops = {
++              .prepare = pcap2_prepare,
++              .hw_params = pcap2_hw_params,
++              .hw_free = pcap2_hw_free,
++      },
++      .dai_ops = {
++//            .digital_mute = pcap2_mute,
++              .set_fmt = pcap2_set_dai_fmt,
++              .set_sysclk = pcap2_set_dai_sysclk,
++      },
++},
++{
++      .name = "PCAP2 STEREO",
++      .id = 1,
++      .playback = {
++              .stream_name = "ST_DAC playback",
++              .channels_min = 1,
++              .channels_max = 2,
++              .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
++                      SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
++                      SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
++                      SNDRV_PCM_RATE_48000),
++              .formats = SNDRV_PCM_FMTBIT_S16_LE,
++      },
++      .capture = { /* FIXME: PCAP support this?? */
++              .stream_name = "ST_DAC capture",
++              .channels_min = 1,
++              .channels_max = 1,
++              .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
++                      SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
++                      SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
++                      SNDRV_PCM_RATE_48000),
++              .formats = SNDRV_PCM_FMTBIT_S16_LE,
++      },
++      .ops = {
++              .prepare = pcap2_prepare,
++              .hw_params = pcap2_hw_params,
++              .hw_free = pcap2_hw_free,
++      },
++      .dai_ops = {
++//            .digital_mute = pcap2_mute,
++              .set_fmt = pcap2_set_dai_fmt,
++              .set_sysclk = pcap2_set_dai_sysclk,
++      },
++},
++{
++      .name = "PCAP2 BP",
++      .id = 2,
++      .playback = {
++              .stream_name = "BP playback",
++              .channels_min = 1,
++              .channels_max = 1,
++              .rates = SNDRV_PCM_RATE_8000,
++              .formats = SNDRV_PCM_FMTBIT_S16_LE,
++      },
++      .ops = {
++              .prepare = pcap2_prepare,
++              .hw_params = pcap2_hw_params,
++              .hw_free = pcap2_hw_free,
++      },
++      .dai_ops = {
++//            .digital_mute = pcap2_mute,
++              .set_fmt = pcap2_set_dai_fmt,
++              .set_sysclk = pcap2_set_dai_sysclk,
++      },
++},
++};
++EXPORT_SYMBOL_GPL(pcap2_dai);
++
++static int pcap2_codec_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      struct snd_soc_device *socdev = platform_get_drvdata(pdev);
++      struct snd_soc_codec *codec = socdev->codec;
++
++      dbg("pcap2_codec_suspend");
++      pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3cold);
++      return 0;
++}
++
++static int pcap2_codec_resume(struct platform_device *pdev)
++{
++      struct snd_soc_device *socdev = platform_get_drvdata(pdev);
++      struct snd_soc_codec *codec = socdev->codec;
++
++      dbg("pcap2_codec_resume");
++      pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3hot);
++      pcap2_codec_dapm_event(codec, codec->suspend_dapm_state);
++      return 0;
++}
++
++/*
++ * initialise the PCAP2 driver
++ * register the mixer and dsp interfaces with the kernel
++ */
++static int pcap2_codec_init(struct snd_soc_device *socdev)
++{
++      struct snd_soc_codec *codec = socdev->codec;
++      int ret = 0;
++
++      dbg("pcap2_codec_init");
++      codec->name = "PCAP2 Audio";
++      codec->owner = THIS_MODULE;
++      codec->read = pcap2_codec_read;
++      codec->write = pcap2_codec_write;
++      codec->dapm_event = pcap2_codec_dapm_event;
++      codec->dai = pcap2_dai;
++      codec->num_dai = ARRAY_SIZE(pcap2_dai);
++
++      /* register pcms */
++      ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
++      if (ret < 0) {
++              return ret;
++      }
++      /* power on device */
++      pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3hot);
++      /* set the update bits */
++
++      pcap2_codec_add_controls(codec);
++      pcap2_codec_add_widgets(codec);
++      ret = snd_soc_register_card(socdev);
++      if (ret < 0) {
++              snd_soc_free_pcms(socdev);
++              snd_soc_dapm_free(socdev);
++      }
++
++      return ret;
++}
++
++static int pcap2_codec_probe(struct platform_device *pdev)
++{
++      struct snd_soc_device *socdev = platform_get_drvdata(pdev);
++      struct pcap2_codec_setup_data *setup;
++      struct snd_soc_codec *codec;
++      int ret = 0;
++      info("PCAP2 Audio Codec %s", PCAP2_VERSION);
++
++      setup = socdev->codec_data;
++      codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
++      if (codec == NULL)
++              return -ENOMEM;
++
++      socdev->codec = codec;
++      mutex_init(&codec->mutex);
++      INIT_LIST_HEAD(&codec->dapm_widgets);
++      INIT_LIST_HEAD(&codec->dapm_paths);
++
++      pcap2_codec_socdev = socdev;
++
++      ret = pcap2_codec_init(socdev);
++      return ret;
++}
++
++/* power down chip and remove */
++static int pcap2_codec_remove(struct platform_device *pdev)
++{
++      struct snd_soc_device *socdev = platform_get_drvdata(pdev);
++      struct snd_soc_codec *codec = socdev->codec;
++      if (codec->control_data)
++              pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3cold);
++      snd_soc_free_pcms(socdev);
++      snd_soc_dapm_free(socdev);
++
++      kfree(codec);
++
++      return 0;
++}
++
++/* codec device ops */
++struct snd_soc_codec_device soc_codec_dev_pcap2 = {
++      .probe =        pcap2_codec_probe,
++      .remove =       pcap2_codec_remove,
++      .suspend =      pcap2_codec_suspend,
++      .resume =       pcap2_codec_resume,
++};
++
++EXPORT_SYMBOL_GPL(soc_codec_dev_pcap2);
++
++MODULE_DESCRIPTION("ASoC PCAP2 codec");
++MODULE_AUTHOR("Daniel Ribeiro");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.24/sound/soc/codecs/pcap2.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24/sound/soc/codecs/pcap2.h
+@@ -0,0 +1,81 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _PCAP2_H
++#define _PCAP2_H
++
++/* 16 bit reads/writes on pcap registers (ugly workaround) */
++#define SL (1 << 5)   /* lower 16 bits */
++#define SM (1 << 6)   /* mid 16 bits */
++#define SH (1 << 7)   /* higher 16 bits */
++
++/* PCAP2 register space */
++#define PCAP2_CODEC                   0x0b
++#define PCAP2_OUTPUT_AMP              0x0c
++#define PCAP2_ST_DAC                  0x0d
++#define PCAP2_INPUT_AMP                       0x1a
++
++#define PCAP2_MONO_DAI                        0
++#define PCAP2_STEREO_DAI              1
++#define PCAP2_BP_DAI                  2
++
++#define PCAP2_CLK_BP                  0
++#define PCAP2_CLK_AP                  1
++
++#define PCAP2_CODEC_EN                        0x2000
++#define PCAP2_CODEC_CLK_EN            0x1000
++#define PCAP2_CODEC_RESET_DF          0x800
++#define PCAP2_CODEC_RATE_MASK         0x4000
++#define PCAP2_CODEC_RATE_8000         0x0
++#define PCAP2_CODEC_RATE_16000                0x4000
++#define PCAP2_CODEC_CLKSEL_MASK               0x10000
++#define PCAP2_CODEC_CLKSEL_AP         0x10000
++#define PCAP2_CODEC_CLKSEL_BP         0x0
++#define PCAP2_CODEC_CLK_MASK          0x1c0
++#define PCAP2_CODEC_CLK_13M           0x0
++#define PCAP2_CODEC_CLK_15M36         0x40
++#define PCAP2_CODEC_CLK_16M8          0x80
++#define PCAP2_CODEC_CLK_19M44         0xc0
++#define PCAP2_CODEC_CLK_26M           0x100
++
++#define PCAP2_ST_DAC_EN                       0x80
++#define PCAP2_ST_DAC_CLK_EN           0x20
++#define PCAP2_ST_DAC_RESET_DF         0x40
++#define PCAP2_ST_DAC_RATE_MASK                0xf00
++#define PCAP2_ST_DAC_RATE_8000                0x0
++#define PCAP2_ST_DAC_RATE_11025               0x100
++#define PCAP2_ST_DAC_RATE_12000               0x200
++#define PCAP2_ST_DAC_RATE_16000               0x300
++#define PCAP2_ST_DAC_RATE_22050               0x400
++#define PCAP2_ST_DAC_RATE_24000               0x500
++#define PCAP2_ST_DAC_RATE_32000               0x600
++#define PCAP2_ST_DAC_RATE_44100               0x700
++#define PCAP2_ST_DAC_RATE_48000               0x800
++#define PCAP2_ST_DAC_CLKSEL_MASK      0x80000
++#define PCAP2_ST_DAC_CLKSEL_AP                0x80000
++#define PCAP2_ST_DAC_CLKSEL_BP                0x0
++#define PCAP2_ST_DAC_CLK_MASK         0x1c
++#define PCAP2_ST_DAC_CLK_13M          0x0
++#define PCAP2_ST_DAC_CLK_15M36                0x4
++#define PCAP2_ST_DAC_CLK_16M8         0x8
++#define PCAP2_ST_DAC_CLK_19M44                0xc
++#define PCAP2_ST_DAC_CLK_26M          0x10
++#define PCAP2_ST_DAC_CLK_MCLK         0x14
++#define PCAP2_ST_DAC_CLK_FSYNC                0x18
++#define PCAP2_ST_DAC_CLK_BITCLK               0x1c
++
++#define PCAP2_INPUT_AMP_LOWPWR                0x80000
++#define PCAP2_INPUT_AMP_V2EN2         0x200000
++
++#define PCAP2_OUTPUT_AMP_PGAR_EN      0x800
++#define PCAP2_OUTPUT_AMP_PGAL_EN      0x1000
++#define PCAP2_OUTPUT_AMP_CDC_SW               0x100
++#define PCAP2_OUTPUT_AMP_ST_DAC_SW    0x200
++
++extern struct snd_soc_codec_dai pcap2_dai[];
++extern struct snd_soc_codec_device soc_codec_dev_pcap2;
++
++#endif
+Index: linux-2.6.24/sound/soc/pxa/Kconfig
+===================================================================
+--- linux-2.6.24.orig/sound/soc/pxa/Kconfig
++++ linux-2.6.24/sound/soc/pxa/Kconfig
+@@ -57,3 +57,12 @@
+       help
+         Say Y if you want to add support for SoC audio on Sharp
+         Zaurus SL-C6000x models (Tosa).
++
++config SND_PXA2XX_SOC_EZX
++      tristate "SoC Audio support for EZX"
++      depends on SND_PXA2XX_SOC && PXA_EZX
++      select SND_PXA2XX_SOC_SSP
++      select SND_SOC_PCAP2
++      help
++        Say Y if you want to add support for SoC audio on
++        Motorola EZX Phones (a780/e680).
+Index: linux-2.6.24/sound/soc/pxa/ezx.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/sound/soc/pxa/ezx.c
+@@ -0,0 +1,349 @@
++/*
++ * ezx.c - Machine specific code for EZX phones
++ *
++ *    Copyright (C) 2007 Daniel Ribeiro <wyrm@openezx.org>
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++#include <sound/soc-dapm.h>
++
++#include <asm/mach-types.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/hardware.h>
++
++#include <asm/arch/ezx-pcap.h>
++
++#include "../codecs/pcap2.h"
++#include "pxa2xx-pcm.h"
++#include "pxa2xx-ssp.h"
++
++#define GPIO_HW_ATTENUATE_A780  96
++
++static struct snd_soc_codec *control_codec;
++
++static void ezx_ext_control(struct snd_soc_codec *codec)
++{
++      if (ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_A1)))
++              snd_soc_dapm_set_endpoint(codec, "Headset", 1);
++      else
++              snd_soc_dapm_set_endpoint(codec, "Headset", 0);
++      if (ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_MB2)))
++              snd_soc_dapm_set_endpoint(codec, "External Mic", 1);
++      else
++              snd_soc_dapm_set_endpoint(codec, "External Mic", 0);
++
++      snd_soc_dapm_sync_endpoints(codec);
++}
++
++static irqreturn_t jack_irq(int irq, void *data)
++{
++      ezx_ext_control(control_codec);
++      return IRQ_HANDLED;
++}
++
++
++/*
++ * Alsa operations
++ * Only implement the required operations for your platform.
++ * These operations are specific to the machine only.
++ */
++
++ /*
++ * Called by ALSA when a PCM substream is opened, private data can be allocated.
++ */
++static int ezx_machine_startup(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_codec *codec = rtd->socdev->codec;
++
++      /* check the jack status at stream startup */
++      ezx_ext_control(codec);
++      return 0;
++}
++
++/*
++ * Called by ALSA when the hardware params are set by application. This
++ * function can also be called multiple times and can allocate buffers
++ * (using snd_pcm_lib_* ). It's non-atomic.
++ */
++static int ezx_machine_hw_params(struct snd_pcm_substream *substream,
++                              struct snd_pcm_hw_params *params)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
++      struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
++      int ret;
++
++      /* set codec DAI configuration */
++      if (codec_dai->id == PCAP2_STEREO_DAI)
++              ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
++                      SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBM_CFM);
++      else
++              ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
++                      SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
++      if(ret < 0)
++              return ret;
++
++      /* Turn on clock output on CLK_PIO */
++      OSCC |= 0x8;
++
++      /* set clock source */
++      ret = codec_dai->dai_ops.set_sysclk(codec_dai, PCAP2_CLK_AP,
++                                      13000000, SND_SOC_CLOCK_IN);
++      if(ret < 0)
++              return ret;
++
++      /* set cpu DAI configuration */
++      ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B |
++                      SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
++      if (ret < 0)
++              return ret;
++
++      ret = cpu_dai->dai_ops.set_tristate(cpu_dai, 0);
++      if (ret < 0)
++              return ret;
++
++      ret = cpu_dai->dai_ops.set_sysclk(cpu_dai,PXA2XX_SSP_CLK_EXT,
++                                              0, SND_SOC_CLOCK_IN);
++      if (ret < 0)
++              return ret;
++
++      return 0;
++}
++
++/*
++ * Free's resources allocated by hw_params, can be called multiple times
++ */
++static int ezx_machine_hw_free(struct snd_pcm_substream *substream)
++{
++      OSCC &= ~0x8; /* turn off clock output on CLK_PIO */
++
++      return 0;
++}
++
++static int ezx_machine_prepare(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
++      struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
++
++      if (codec_dai->id == PCAP2_STEREO_DAI) {
++              /* override pxa2xx-ssp sample size for stereo/network mode */
++              SSCR0_P(cpu_dai->id+1) &= ~(SSCR0_DSS | SSCR0_EDSS);
++              SSCR0_P(cpu_dai->id+1) |= (SSCR0_EDSS | SSCR0_DataSize(16));
++      }
++      return 0;
++}
++
++/* machine Alsa PCM operations */
++static struct snd_soc_ops ezx_ops = {
++      .startup = ezx_machine_startup,
++      .prepare = ezx_machine_prepare,
++      .hw_free = ezx_machine_hw_free,
++      .hw_params = ezx_machine_hw_params,
++};
++
++static int bp_hw_params(struct snd_pcm_substream *substream,
++                              struct snd_pcm_hw_params *params)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
++//    struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
++      int ret = 0;
++      /* set codec DAI configuration */
++      ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
++              SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
++      if(ret < 0)
++              return ret;
++
++      /* set clock source */
++      ret = codec_dai->dai_ops.set_sysclk(codec_dai, PCAP2_CLK_BP,
++                                      13000000, SND_SOC_CLOCK_IN);
++
++      return ret;
++}
++
++
++
++/* machine dapm widgets */
++static const struct snd_soc_dapm_widget ezx_dapm_widgets[] = {
++      SND_SOC_DAPM_HP("Headset", NULL),
++      SND_SOC_DAPM_SPK("Earpiece", NULL),
++      SND_SOC_DAPM_SPK("Loudspeaker", NULL),
++      SND_SOC_DAPM_MIC("Built-in Mic", NULL),
++      SND_SOC_DAPM_MIC("External Mic", NULL),
++};
++
++/* machine audio map (connections to the codec pins) */
++static const char *audio_map[][3] = {
++      { "Headset", NULL, "AR" },
++      { "Headset", NULL, "AL" },
++      { "Earpiece", NULL, "A1" },
++      { "Loudspeaker", NULL, "A2" },
++
++      { "Built-in Mic", NULL, "A5" },
++      { "External Mic", NULL, "A3" },
++
++      {NULL, NULL, NULL},
++};
++
++/*
++ * Initialise the machine audio subsystem.
++ */
++static int ezx_machine_init(struct snd_soc_codec *codec)
++{
++      int i;
++      /* mark unused codec pins as NC */
++//    snd_soc_dapm_set_endpoint(codec, "FIXME", 0);
++      control_codec = codec;
++
++        /* Add ezx specific controls */
++//    for (i = 0; i < ARRAY_SIZE(ezx_controls); i++) {
++//            if ((err = snd_ctl_add(codec->card, snd_soc_cnew(&ezx_controls[i], codec, NULL))) < 0)
++//                    return err;
++//    }
++
++      /* Add ezx specific widgets */
++      for(i = 0; i < ARRAY_SIZE(ezx_dapm_widgets); i++) {
++              snd_soc_dapm_new_control(codec, &ezx_dapm_widgets[i]);
++      }
++      /* Set up ezx specific audio path interconnects */
++      for(i = 0; audio_map[i][0] != NULL; i++) {
++              snd_soc_dapm_connect_input(codec, audio_map[i][0], audio_map[i][1], audio_map[i][2]);
++      }
++
++      /* synchronise subsystem */
++      snd_soc_dapm_sync_endpoints(codec);
++      return 0;
++}
++
++static struct snd_soc_cpu_dai bp_dai =
++{
++      .name = "Baseband",
++      .id = 0,
++      .type = SND_SOC_DAI_PCM,
++      .playback = {
++              .channels_min = 1,
++              .channels_max = 1,
++              .rates = SNDRV_PCM_RATE_8000,
++              .formats = SNDRV_PCM_FMTBIT_S16_LE,
++      },
++      .capture = {
++              .channels_min = 1,
++              .channels_max = 1,
++              .rates = SNDRV_PCM_RATE_8000,
++              .formats = SNDRV_PCM_FMTBIT_S16_LE,
++      },
++      .ops = {
++//            .startup = bp_startup,
++//            .shutdown = bp_shutdown,
++              .hw_params = bp_hw_params,
++//            .hw_free = bp_hw_free,
++      },
++};
++
++/* template digital audio interface glue - connects codec <--> CPU */
++static struct snd_soc_dai_link ezx_dai[] = {
++{
++      .name = "PCAP2 STEREO",
++      .stream_name = "stereo playback",
++      .cpu_dai = &pxa_ssp_dai[PXA2XX_DAI_SSP3],
++      .codec_dai = &pcap2_dai[PCAP2_STEREO_DAI],
++      .init = ezx_machine_init,
++      .ops = &ezx_ops,
++},
++{
++      .name = "PCAP2 MONO",
++      .stream_name = "mono playback",
++      .cpu_dai = &pxa_ssp_dai[PXA2XX_DAI_SSP3],
++      .codec_dai = &pcap2_dai[PCAP2_MONO_DAI],
++//    .init = ezx_machine_init, /* the stereo call already registered our controls */
++      .ops = &ezx_ops,
++},
++{
++      .name = "PCAP2 BP",
++      .stream_name = "BP Audio",
++      .cpu_dai = &bp_dai,
++      .codec_dai = &pcap2_dai[PCAP2_BP_DAI],
++},
++};
++
++/* template audio machine driver */
++static struct snd_soc_machine snd_soc_machine_ezx = {
++      .name = "Motorola EZX",
++//    .probe
++//    .remove
++//    .suspend_pre
++//    .resume_post
++      .dai_link = ezx_dai,
++      .num_links = ARRAY_SIZE(ezx_dai),
++};
++
++/* template audio subsystem */
++static struct snd_soc_device ezx_snd_devdata = {
++      .machine = &snd_soc_machine_ezx,
++      .platform = &pxa2xx_soc_platform,
++      .codec_dev = &soc_codec_dev_pcap2,
++};
++
++static struct platform_device *ezx_snd_device;
++
++static int __init ezx_init(void)
++{
++      int ret;
++      ezx_snd_device = platform_device_alloc("soc-audio", -1);
++      if (!ezx_snd_device)
++              return -ENOMEM;
++
++      platform_set_drvdata(ezx_snd_device, &ezx_snd_devdata);
++      ezx_snd_devdata.dev = &ezx_snd_device->dev;
++      ret = platform_device_add(ezx_snd_device);
++
++      if (ret)
++              platform_device_put(ezx_snd_device);
++      /* configure gpio for ssp3 */
++      pxa_gpio_mode(GPIO83_SFRM3_MD); /* SFRM */
++      pxa_gpio_mode(GPIO81_STXD3_MD); /* TXD  */
++      pxa_gpio_mode(GPIO52_SCLK3_MD); /* SCLK */
++      pxa_gpio_mode(GPIO89_SRXD3_MD); /* RXD  */
++
++      /* configure gpio for ssp2 */
++      pxa_gpio_mode(37 | GPIO_IN);    /* SFRM */
++      pxa_gpio_mode(38 | GPIO_IN);    /* TXD  */
++      pxa_gpio_mode(22 | GPIO_IN);    /* SCLK */
++      pxa_gpio_mode(88 | GPIO_IN);    /* RXD  */
++
++      pxa_gpio_mode(GPIO_HW_ATTENUATE_A780 | GPIO_OUT);
++      pxa_gpio_set_value(GPIO_HW_ATTENUATE_A780, 1);
++
++      /* request jack irq */
++      request_irq(EZX_IRQ_HEADJACK, &jack_irq, IRQF_DISABLED, "headphone jack", NULL);
++      request_irq(EZX_IRQ_MIC, &jack_irq, IRQF_DISABLED, "mic jack", NULL);
++
++      return ret;
++}
++
++static void __exit ezx_exit(void)
++{
++      free_irq(EZX_IRQ_HEADJACK, NULL);
++      free_irq(EZX_IRQ_MIC, NULL);
++      platform_device_unregister(ezx_snd_device);
++}
++
++module_init(ezx_init);
++module_exit(ezx_exit);
++
+Index: linux-2.6.24/sound/soc/codecs/Makefile
+===================================================================
+--- linux-2.6.24.orig/sound/soc/codecs/Makefile
++++ linux-2.6.24/sound/soc/codecs/Makefile
+@@ -4,6 +4,7 @@
+ snd-soc-wm8753-objs := wm8753.o
+ snd-soc-wm9712-objs := wm9712.o
+ snd-soc-cs4270-objs := cs4270.o
++snd-soc-pcap2-objs := pcap2.o
+ 
+ obj-$(CONFIG_SND_SOC_AC97_CODEC)      += snd-soc-ac97.o
+ obj-$(CONFIG_SND_SOC_WM8731)  += snd-soc-wm8731.o
+@@ -11,3 +12,4 @@
+ obj-$(CONFIG_SND_SOC_WM8753)  += snd-soc-wm8753.o
+ obj-$(CONFIG_SND_SOC_WM9712)  += snd-soc-wm9712.o
+ obj-$(CONFIG_SND_SOC_CS4270)  += snd-soc-cs4270.o
++obj-$(CONFIG_SND_SOC_PCAP2)   += snd-soc-pcap2.o
+Index: linux-2.6.24/sound/soc/codecs/Kconfig
+===================================================================
+--- linux-2.6.24.orig/sound/soc/codecs/Kconfig
++++ linux-2.6.24/sound/soc/codecs/Kconfig
+@@ -37,3 +37,6 @@
+       bool
+       depends on SND_SOC_CS4270
+ 
++config SND_SOC_PCAP2
++      tristate
++      depends on SND_SOC && EZX_PCAP
+Index: linux-2.6.24/sound/soc/pxa/Makefile
+===================================================================
+--- linux-2.6.24.orig/sound/soc/pxa/Makefile
++++ linux-2.6.24/sound/soc/pxa/Makefile
+@@ -14,9 +14,10 @@
+ snd-soc-poodle-objs := poodle.o
+ snd-soc-tosa-objs := tosa.o
+ snd-soc-spitz-objs := spitz.o
++snd-soc-ezx-objs := ezx.o
+ 
+ obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o
+ obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o
+ obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o
+ obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o
+-
++obj-$(CONFIG_SND_PXA2XX_SOC_EZX) += snd-soc-ezx.o

diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-backlight.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-backlight.patch
new file mode 100644 (file)
index 0000000..a2a7070
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/ezx-backlight.patch
@@ -0,0 +1,203 @@
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+Index: linux-2.6.24/drivers/video/backlight/Kconfig
+===================================================================
+--- linux-2.6.24.orig/drivers/video/backlight/Kconfig
++++ linux-2.6.24/drivers/video/backlight/Kconfig
+@@ -90,3 +90,12 @@
+       help
+         If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
+         backlight driver.
++
++config BACKLIGHT_EZX
++      tristate "Motorola EXZ Backlight Driver (A780/E680/E680i)"
++      depends on BACKLIGHT_CLASS_DEVICE && PXA_EZX
++      default y
++      help
++        If you have a Motorola A780 or E680(i), say y to enable the
++        backlight driver.
++
+Index: linux-2.6.24/drivers/video/backlight/Makefile
+===================================================================
+--- linux-2.6.24.orig/drivers/video/backlight/Makefile
++++ linux-2.6.24/drivers/video/backlight/Makefile
+@@ -9,3 +9,4 @@
+ obj-$(CONFIG_BACKLIGHT_LOCOMO)        += locomolcd.o
+ obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
+ obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
++obj-$(CONFIG_BACKLIGHT_EZX)   += ezx_bl.o
+Index: linux-2.6.24/drivers/video/backlight/ezx_bl.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/video/backlight/ezx_bl.c
+@@ -0,0 +1,142 @@
++/*
++ * Backlight Driver for Motorola A780 and E680(i) GSM Phones.
++ *
++ * Copyright 2006 Vanille Media
++ *
++ * Author: Michael Lauer <mickey@Vanille.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fb.h>
++#include <linux/backlight.h>
++
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/ezx.h>
++
++#define EZX_MIN_INTENSITY       0
++#define EZX_MAX_INTENSITY      50
++#define EZX_DEFAULT_INTENSITY  30
++
++static struct backlight_device *ezx_backlight_device;
++static int last_intensity;
++static int suspended;
++
++static int ezxbl_send_intensity(struct backlight_device *bd)
++{
++      int intensity = bd->props.brightness;
++
++      if (suspended || bd->props.power != FB_BLANK_UNBLANK ||
++                      bd->props.fb_blank != FB_BLANK_UNBLANK)
++              intensity = 0;
++
++      if ( !last_intensity && intensity ) {
++              PWM_CTRL0 = 2; /* pre-scaler */
++              PWM_PWDUTY0 = intensity; /* duty cycle */
++              PWM_PERVAL0 = 49; /* period */
++              pxa_gpio_mode(GPIO16_PWM0_MD); /* set GPIO16 as alternate function + output */
++              pxa_set_cken(CKEN_PWM0, 1); /* clock enable */
++      }
++      else if ( last_intensity && !intensity ) {
++              PWM_PWDUTY0 = 0;
++              GAFR0_U &= 0xFFFFFFFC; /* ??? */
++              pxa_set_cken(CKEN_PWM0, 0); /* clock disable */
++              pxa_gpio_mode(GPIO16_PWM0); /* set GPIO16 as input */
++      } else if ( last_intensity && intensity ) {
++              PWM_PWDUTY0 = intensity; /* duty cycle */
++      }
++      last_intensity = intensity;
++      return 0;
++}
++
++static int ezxbl_get_intensity(struct backlight_device *bd)
++{
++      return last_intensity;
++}
++
++static int ezxbl_set_intensity(struct backlight_device *bd)
++{
++      return ezxbl_send_intensity(ezx_backlight_device);
++}
++
++#ifdef CONFIG_PM
++static int ezxbl_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      suspended = 1;
++      ezxbl_set_intensity(ezx_backlight_device);
++      return 0;
++}
++
++static int ezxbl_resume(struct platform_device *pdev)
++{
++      suspended = 0;
++      ezxbl_set_intensity(ezx_backlight_device);
++      return 0;
++}
++#else
++#define ezxbl_suspend NULL
++#define ezxbl_resume  NULL
++#endif
++
++static struct backlight_ops ezxbl_ops = {
++      .get_brightness = ezxbl_get_intensity,
++      .update_status  = ezxbl_set_intensity,
++};
++
++static int __init ezxbl_probe(struct platform_device *pdev)
++{
++      ezx_backlight_device = backlight_device_register ("ezx-bl",
++              &pdev->dev, NULL, &ezxbl_ops);
++      if (IS_ERR (ezx_backlight_device))
++              return PTR_ERR (ezx_backlight_device);
++
++      platform_set_drvdata(pdev, ezx_backlight_device);
++
++      ezx_backlight_device->props.power = FB_BLANK_UNBLANK;
++      ezx_backlight_device->props.max_brightness = EZX_MAX_INTENSITY;
++      ezx_backlight_device->props.brightness = EZX_DEFAULT_INTENSITY;
++      ezxbl_set_intensity(ezx_backlight_device);
++      backlight_update_status(ezx_backlight_device);
++
++      return 0;
++}
++
++static int ezxbl_remove(struct platform_device *pdev)
++{
++      backlight_device_unregister(ezx_backlight_device);
++      return 0;
++}
++
++static struct platform_driver ezxbl_driver = {
++      .probe          = ezxbl_probe,
++      .remove         = ezxbl_remove,
++      .suspend        = ezxbl_suspend,
++      .resume         = ezxbl_resume,
++      .driver         = {
++              .name           = "ezx-bl",
++      },
++};
++
++static int __init ezxbl_init(void)
++{
++      return platform_driver_register(&ezxbl_driver);
++}
++
++static void __exit ezxbl_exit(void)
++{
++      platform_driver_unregister(&ezxbl_driver);
++}
++
++module_init(ezxbl_init);
++module_exit(ezxbl_exit);
++
++MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>");
++MODULE_DESCRIPTION("Backlight Driver for Motorola A780|E680(i)");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/ezx.c
++++ linux-2.6.24/arch/arm/mach-pxa/ezx.c
+@@ -66,6 +66,12 @@
+ #endif
+ EXPORT_SYMBOL_GPL(ezx_backlight_power);
+ 
++/* EZX LCD Backlight */
++static struct platform_device ezxbacklight_device = {
++      .name           = "ezx-bl",
++      .id             = -1,
++};
++
+ /* OHCI Controller */
+ static int ezx_ohci_init(struct device *dev)
+ {
+@@ -107,6 +113,7 @@
+ 
+ static struct platform_device *devices[] __initdata = {
+       &ezxbp_device,
++      &ezxbacklight_device,
+ };
+ 
+ /* PM */

diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-bp.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-bp.patch
new file mode 100644 (file)
index 0000000..e45cb4b
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/ezx-bp.patch
@@ -0,0 +1,351 @@
+This patch adds support for the handshake with the BP (baseband processor)
+of the Motorola EZX smartphones.
+
+Signed-off-by: Daniel Ribeiro <wyrm@openezx.org>
+
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/ezx.c
++++ linux-2.6.24/arch/arm/mach-pxa/ezx.c
+@@ -19,6 +19,7 @@
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/ohci.h>
+ #include <asm/arch/ezx.h>
++#include <asm/arch/ezx-bp.h>
+ 
+ #include "generic.h"
+ 
+@@ -86,8 +87,25 @@
+       .init           = ezx_ohci_init,
+ };
+ 
++/* BP */
++static struct ezxbp_config ezxbp_data = {
++      .gpio_reset = GPIO_BB_RESET,
++      .gpio_wdi = GPIO_BB_WDI,
++      .gpio_wdi2 = GPIO_BB_WDI2,
++      .gpio_rdy = GPIO_BP_RDY,
++      .gpio_mcu_int_sw = GPIO_MCU_INT_SW,
++};
++
++static struct platform_device ezxbp_device = {
++      .name           = "ezx-bp",
++      .dev            = {
++              .platform_data  = &ezxbp_data,
++      },
++      .id             = -1,
++};
+ 
+ static struct platform_device *devices[] __initdata = {
++      &ezxbp_device,
+ };
+ 
+ static int __init ezx_init(void)
+Index: linux-2.6.24/arch/arm/mach-pxa/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/Kconfig
++++ linux-2.6.24/arch/arm/mach-pxa/Kconfig
+@@ -133,6 +133,12 @@
+ 
+ endchoice
+ 
++config EZX_BP
++      bool "Baseband Processor control for EZX platform"
++      help
++        This enables control code for the BP (baseband processor) found in
++        Motorola's EZX smartphone platform.
++
+ endif
+ 
+ endmenu
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx-bp.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/arch/arm/mach-pxa/ezx-bp.c
+@@ -0,0 +1,261 @@
++/*
++ *  BP handshake code for Motorola EZX phones
++ *
++ *  Copyright (c) 2007 Daniel Ribeiro <wyrm@openezx.org>
++ *
++ *  Based on Motorola's a780.c Copyright (c) 2003-2005 Motorola
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach/irq.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/pxa-regs.h>
++
++#include <asm/arch/ezx.h>
++#include <asm/arch/ezx-bp.h>
++
++/* BP Handshake */
++#define FIRST_STEP            2
++#define LAST_STEP             3
++#define BP_RDY_TIMEOUT                0x000c0000
++
++#if 1
++#define DEBUGP(x, args ...)   printk(x, ##args)
++#else
++#define DEBUGP(x, args ...)
++#endif
++
++extern void usb_send_readurb(void);
++
++static struct ezxbp_config *bp;
++
++/* check power down condition */
++static inline void check_power_off(void)
++{
++      if (pxa_gpio_get_value(bp->gpio_wdi2) == 0) {
++              DEBUGP("BP request poweroff!\n");
++              /*
++               * It is correct to power off here, the following line is
++               * commented out because e680 lowers WDI2 when BP is in
++               * flash mode, otherwise WDI2 is used to detect low
++               * battery. You can safely uncomment this line if you are
++               * using this kernel with BP in normal mode.
++               */
++#if 0 /* some versions of BP firmware doesnt honor this */
++              pm_power_off();
++#endif
++      }
++}
++
++static int step = FIRST_STEP;
++
++inline int bp_handshake_passed(void)
++{
++      return (step > LAST_STEP);
++}
++EXPORT_SYMBOL_GPL(bp_handshake_passed);
++
++static void handshake(void)
++{
++      /* step 1: check MCU_INT_SW or BP_RDY is low (now it is checked in apboot) */
++      DEBUGP("bp handshake entered!\n");
++      if (step == 1) {
++              int timeout = BP_RDY_TIMEOUT;
++
++              /* config MCU_INT_SW, BP_RDY as input */
++              pxa_gpio_mode(bp->gpio_mcu_int_sw | GPIO_IN);
++              pxa_gpio_mode(bp->gpio_rdy | GPIO_IN);
++
++              while (timeout--) {
++                      if (pxa_gpio_get_value(bp->gpio_mcu_int_sw) == 0
++                          || pxa_gpio_get_value(bp->gpio_rdy) == 0) {
++                              step++;
++                              break;
++                      }
++
++                      check_power_off();
++              }
++              DEBUGP("ezx-bp: handshake step 1\n");
++      }
++
++      /* step 2: wait BP_RDY is low */
++      if (step == 2) {
++              if (pxa_gpio_get_value(bp->gpio_rdy) == 0) {
++                      /* config MCU_INT_SW as output */
++                      pxa_gpio_mode(bp->gpio_mcu_int_sw | GPIO_OUT);
++                      pxa_gpio_set_value(bp->gpio_mcu_int_sw, 0);
++
++                      step++;
++                      DEBUGP("ezx-bp: handshake step 2\n");
++              }
++      }
++
++      /* step 3: wait BP_RDY is high */
++      else if (step == 3) {
++              if (pxa_gpio_get_value(bp->gpio_rdy)) {
++                      step++;
++                      /* FIXME delay_bklight(); */
++                      pxa_gpio_set_value(bp->gpio_mcu_int_sw, 1);
++                      printk(KERN_NOTICE "ezx-bp: handshake passed\n");
++              }
++      }
++}
++
++irqreturn_t bp_wdi_handler(int irq, void *dev_id)
++{
++      DEBUGP("BP Lowered WDI line. This is not good :(\n");
++      /*
++       * this means that BP is not responsive.
++       * we could try to reset BP and then handshake again
++       * but i doubt its possible to bring it up again.
++       */
++      return IRQ_HANDLED;
++}
++
++static irqreturn_t bp_rdy_handler(int irq, void *dev_id)
++{
++//    struct bp *bp = dev_id;
++      DEBUGP("BP rdy irq\n");
++      if (!bp_handshake_passed()) {
++              handshake();
++              if (bp_handshake_passed()) {
++              /* FIXME: (test) try to not disable irq_wdi2 and drain battery */
++                      disable_irq(IRQ_GPIO(bp->gpio_wdi2));
++
++                      /* set bp_rdy handle for usb ipc */
++                      set_irq_type(IRQ_GPIO(bp->gpio_rdy), IRQT_FALLING);
++              }
++      }
++#ifdef CONFIG_TS0710_MUX_USB
++      else usb_send_readurb();
++#endif
++      return IRQ_HANDLED;
++}
++
++/* BP request for poweroff */
++static irqreturn_t bp_wdi2_handler(int irq, void *dev_id)
++{
++      DEBUGP("BP request poweroff!\n");
++      /* same case as check_power_off() */
++#ifndef CONFIG_PXA_EZX_E680
++      pm_power_off();
++#endif
++      return IRQ_HANDLED;
++}
++
++static int __init ezxbp_probe(struct platform_device *pdev)
++{
++      int ret;
++      bp = pdev->dev.platform_data;
++
++//    bp = kzalloc(sizeof(*bp), GFP_KERNEL);
++//    if (!bp)
++//            return -ENOMEM;
++
++/*    bp->irq_rdy = platform_get_irq(dev, 0);
++      if (bp->irq_rdy < 0) {
++              ret = bp->irq_rdy;
++              goto fail;
++      }
++
++      bp->irq_wdi2 = platform_get_irq(dev, 1);
++      if (bp->irq_wdi2 < 0) {
++              ret = bp->irq_wdi2;
++              goto fail;
++      }
++
++      bp->irq_wdi = platform_get_irq(dev, 2);
++      if (bp->irq_wdi < 0) {
++              ret = bp->irq_wdi;
++              goto fail;
++      }
++*/
++
++      set_irq_type(IRQ_GPIO(bp->gpio_wdi), IRQT_FALLING);
++      request_irq(IRQ_GPIO(bp->gpio_wdi), bp_wdi_handler, IRQF_DISABLED,
++                  "bp wdi", bp);
++
++      set_irq_type(IRQ_GPIO(bp->gpio_rdy), IRQT_BOTHEDGE);
++      request_irq(IRQ_GPIO(bp->gpio_rdy), bp_rdy_handler, IRQF_DISABLED,
++                      "bp rdy", bp);
++
++      set_irq_type(IRQ_GPIO(bp->gpio_wdi2), IRQT_FALLING);
++      request_irq(IRQ_GPIO(bp->gpio_wdi2), bp_wdi2_handler, IRQF_DISABLED,
++                      "bp wdi2", bp);
++
++      /* turn on BP */
++      pxa_gpio_mode(bp->gpio_reset|GPIO_OUT);
++      pxa_gpio_set_value(bp->gpio_reset, 1);
++
++      check_power_off();
++      handshake();
++
++      return 0;
++fail:
++      kfree(bp);
++      return ret;
++}
++
++static int ezxbp_remove(struct platform_device *dev)
++{
++//    struct bp *bp = platform_get_drvdata(dev);
++
++      free_irq(IRQ_GPIO(bp->gpio_wdi), bp);
++      free_irq(IRQ_GPIO(bp->gpio_wdi2), bp);
++      free_irq(IRQ_GPIO(bp->gpio_rdy), bp);
++      kfree(bp);
++
++      return 0;
++}
++
++static int ezxbp_suspend(struct platform_device *dev, pm_message_t state)
++{
++      DEBUGP("bp suspend!\n");
++/*    pxa_gpio_set_value(bp->gpio_mcu_int_sw, 0); */
++      return 0;
++}
++
++static int ezxbp_resume(struct platform_device *dev)
++{
++      DEBUGP("bp resume!\n");
++/*    pxa_gpio_set_value(bp->gpio_mcu_int_sw, 1); */
++      return 0;
++}
++static struct platform_driver ezxbp_driver = {
++      .probe          = ezxbp_probe,
++      .remove         = ezxbp_remove,
++#warning FIXME: missing suspend/resume support
++      .suspend        = ezxbp_suspend,
++      .resume         = ezxbp_resume,
++      .driver         = {
++              .name   = "ezx-bp",
++              .owner  = THIS_MODULE,
++      },
++};
++
++int __init ezxbp_init(void)
++{
++      return platform_driver_register(&ezxbp_driver);
++}
++
++void ezxbp_fini(void)
++{
++      return platform_driver_unregister(&ezxbp_driver);
++}
++
++module_init(ezxbp_init);
++module_exit(ezxbp_fini);
++
++MODULE_DESCRIPTION("Motorola BP Control driver");
++MODULE_AUTHOR("Daniel Ribeiro <wyrm@openezx.org>");
++MODULE_LICENSE("GPL");
++
+Index: linux-2.6.24/arch/arm/mach-pxa/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/Makefile
++++ linux-2.6.24/arch/arm/mach-pxa/Makefile
+@@ -36,6 +36,7 @@
+ obj-$(CONFIG_PXA_EZX_E2)      += ezx-e2.o
+ obj-$(CONFIG_PXA_EZX_A1200)   += ezx-a1200.o
+ obj-$(CONFIG_PXA_EZX_E6)      += ezx-e6.o
++obj-$(CONFIG_EZX_BP)          += ezx-bp.o
+ 
+ # Support for blinky lights
+ led-y := leds.o
+Index: linux-2.6.24/include/asm-arm/arch-pxa/ezx-bp.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24/include/asm-arm/arch-pxa/ezx-bp.h
+@@ -0,0 +1,8 @@
++struct ezxbp_config {
++      /* gpios for handshake */
++      int gpio_reset;
++      int gpio_wdi;
++      int gpio_wdi2;
++      int gpio_rdy;
++      int gpio_mcu_int_sw;
++};

diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-core.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-core.patch
new file mode 100644 (file)
index 0000000..6221a88
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/ezx-core.patch
@@ -0,0 +1,1042 @@
+This patch adds the core EZX support for the Motorola E680/A780/A1200/E6
+smartphones.
+
+Signed-off-by: Daniel Ribeiro <wyrm@openezx.org>
+Signed-off-by: Harald Welte <laforge@openezx.org>
+
+Index: linux-2.6.24/arch/arm/boot/compressed/head-xscale.S
+===================================================================
+--- linux-2.6.24.orig/arch/arm/boot/compressed/head-xscale.S
++++ linux-2.6.24/arch/arm/boot/compressed/head-xscale.S
+@@ -44,3 +44,6 @@
+               str     r1, [r0, #0x18]
+ #endif
+ 
++#ifdef CONFIG_ARCH_EZX
++              mov     r7, #MACH_TYPE_EZX
++#endif
+Index: linux-2.6.24/arch/arm/mach-pxa/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/Kconfig
++++ linux-2.6.24/arch/arm/mach-pxa/Kconfig
+@@ -68,6 +68,10 @@
+       select PXA27x
+       select IWMMXT
+ 
++config PXA_EZX
++      bool "Motorola EZX Platform"
++      select PXA_SSP
++
+ endchoice
+ 
+ if PXA_SHARPSL
+@@ -102,6 +106,35 @@
+ 
+ endif
+ 
++if PXA_EZX
++
++choice
++      prompt "Select target EZX device"
++
++config PXA_EZX_E680
++      bool "Motorola E680 GSM Phone"
++      select PXA27x
++
++config PXA_EZX_A780
++      bool "Motorola A780 GSM Phone"
++      select PXA27x
++
++config PXA_EZX_E2
++      bool "Motorola E2 GSM Phone"
++      select PXA27x
++
++config PXA_EZX_A1200
++      bool "Motorola A1200 GSM Phone"
++      select PXA27x
++
++config PXA_EZX_E6
++      bool "Motorola E6 GSM Phone"
++      select PXA27x
++
++endchoice
++
++endif
++
+ endmenu
+ 
+ config MACH_POODLE
+@@ -180,4 +213,5 @@
+       tristate
+       help
+         Enable support for PXA2xx SSP ports
++
+ endif
+Index: linux-2.6.24/arch/arm/mach-pxa/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/Makefile
++++ linux-2.6.24/arch/arm/mach-pxa/Makefile
+@@ -30,6 +30,12 @@
+ endif
+ 
+ obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
++obj-$(CONFIG_PXA_EZX)         += ezx.o
++obj-$(CONFIG_PXA_EZX_A780)    += ezx-a780.o
++obj-$(CONFIG_PXA_EZX_E680)    += ezx-e680.o
++obj-$(CONFIG_PXA_EZX_E2)      += ezx-e2.o
++obj-$(CONFIG_PXA_EZX_A1200)   += ezx-a1200.o
++obj-$(CONFIG_PXA_EZX_E6)      += ezx-e6.o
+ 
+ # Support for blinky lights
+ led-y := leds.o
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/arch/arm/mach-pxa/ezx.c
+@@ -0,0 +1,118 @@
++/*
++ *  ezx.c - Common code for EZX platform.
++ *
++ *  Copyright (c) 2005-2007 OpenEZX Team (www.openezx.org)
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fb.h>
++#include <linux/delay.h>
++
++#include <asm/arch/pxafb.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/ohci.h>
++#include <asm/arch/ezx.h>
++
++#include "generic.h"
++
++/* EZX PXA Framebuffer */
++void ezx_lcd_power(int on, struct fb_var_screeninfo *var)
++{
++      if (on) {
++              msleep(1);
++              GPSR3 = 0x00100000;
++              msleep(10);
++              GPCR3 = 0x00100000;
++              GPDR3 |= 0x00100000;
++      } else {
++              GPSR3 = 0x00100000;
++              PGSR3 |= 0x00100000;
++              msleep(41);
++              LCCR0 &= ~LCCR0_LDM;    /* disable lcd disable done interrupt */
++              LCCR0 |= LCCR0_DIS;     /* normal disable lcd */
++              msleep(18);
++      }
++}
++EXPORT_SYMBOL_GPL(ezx_lcd_power);
++
++/* failsafe if we are not using the backlight platform driver */
++#ifndef CONFIG_BACKLIGHT_EZX
++void ezx_backlight_power(int on)
++{
++      if (on) {
++              pxa_gpio_mode(GPIO16_PWM0_MD);
++              pxa_set_cken(CKEN_PWM0, 1);
++              PWM_CTRL0 = 0;
++              PWM_PWDUTY0 = 0x3ff;
++              PWM_PERVAL0 = 0x3ff;
++      } else {
++              PWM_CTRL0 = 0;
++              PWM_PWDUTY0 = 0x0;
++              PWM_PERVAL0 = 0x3FF;
++              pxa_set_cken(CKEN_PWM0, 0);
++      }
++}
++#else
++void ezx_backlight_power(int on) {}
++#endif
++EXPORT_SYMBOL_GPL(ezx_backlight_power);
++
++/* OHCI Controller */
++static int ezx_ohci_init(struct device *dev)
++{
++      /* for A780 support (connected with Neptune) */
++      pxa_gpio_mode(GPIO30_USB_P3_2); /* GPIO30 - USB_P3_2/ICL_TXENB */
++      pxa_gpio_mode(GPIO31_USB_P3_6); /* GPIO31 - USB_P3_6/ICL_VPOUT */
++      pxa_gpio_mode(GPIO90_USB_P3_5); /* GPIO90 - USB_P3_5/ICL_VPIN */
++      pxa_gpio_mode(GPIO91_USB_P3_1); /* GPIO91 - USB_P3_1/ICL_XRXD */
++      pxa_gpio_mode(GPIO56_USB_P3_4); /* GPIO56 - USB_P3_4/ICL_VMOUT */
++      pxa_gpio_mode(GPIO113_USB_P3_3);/* GPIO113 - USB_P3_3/ICL_VMIN */
++      UP3OCR = 0x00000002;
++
++      UHCHR = UHCHR & ~(UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
++
++      return 0;
++}
++
++static struct pxaohci_platform_data ezx_ohci_platform_data = {
++      .port_mode      = PMM_NPS_MODE,
++      .init           = ezx_ohci_init,
++};
++
++
++static struct platform_device *devices[] __initdata = {
++};
++
++static int __init ezx_init(void)
++{
++      CKEN = (1 << CKEN_OSTIMER) | (1 << CKEN_MEMC);
++
++      pxa_gpio_mode(GPIO_ICL_FFRXD_MD);
++      pxa_gpio_mode(GPIO_ICL_FFTXD_MD);
++      pxa_gpio_mode(GPIO_ICL_FFCTS_MD);
++      pxa_gpio_mode(GPIO_ICL_FFRTS_MD);
++
++      pxa_gpio_mode(GPIO42_BTRXD_MD);
++      pxa_gpio_mode(GPIO43_BTTXD_MD);
++      pxa_gpio_mode(GPIO44_BTCTS_MD);
++      pxa_gpio_mode(GPIO45_BTRTS_MD);
++
++      /* Standard UART */
++      pxa_gpio_mode(GPIO46_STRXD_MD);
++      pxa_gpio_mode(GPIO47_STTXD_MD);
++
++      pxa_set_ohci_info(&ezx_ohci_platform_data);
++
++      platform_add_devices(devices, ARRAY_SIZE(devices));
++
++      return 0;
++}
++
++subsys_initcall(ezx_init);
+Index: linux-2.6.24/include/asm-arm/arch-pxa/ezx.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24/include/asm-arm/arch-pxa/ezx.h
+@@ -0,0 +1,225 @@
++/*
++ *  linux/include/asm-arm/arch-pxa/ezx.h
++ *
++ *  Specific macro defines for Motorola Ezx Development Platform
++ *
++ *  Author:     Zhuang Xiaofan
++ *  Created:    Nov 25, 2003
++ *  Copyright:  Motorola Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++/* support E680 p3 and ealier PCB */
++/*#define   E680_P3_AND_EARLY*/
++
++#define GPIO_is_high(x) (GPLR(x) & GPIO_bit(x))
++#define set_GPIO(x) (GPSR(x) = GPIO_bit(x))
++#define clr_GPIO(x) (GPCR(x) = GPIO_bit(x))
++
++/*
++ * Flags in memory for sleep use
++ */
++#define FLAG_ADDR       PHYS_OFFSET
++#define RESUME_ADDR     (PHYS_OFFSET + 4)
++#define BPSIG_ADDR      (PHYS_OFFSET + 8)
++
++#define USER_OFF_FLAG   0x5a5a5a5a
++#define SLEEP_FLAG      0x6b6b6b6b
++#define OFF_FLAG        0x7c7c7c7c
++#define REFLASH_FLAG    0x0C1D2E3F
++#define PASS_THRU_FLAG        0x12345678
++
++#define WDI_FLAG        0xbb00dead
++#define NO_FLAG         0xaa00dead
++
++/*
++ * GPIO control pin, have to change when hardware lock down
++ */
++
++#ifdef E680_P3_AND_EARLY
++
++/* shakehand  with BP's PIN  */
++#define GPIO_BP_RDY            0       /* BP_RDY     */
++#define GPIO_BB_WDI            13      /* BB_WDI     */
++#define GPIO_BB_WDI2           3       /* BB_WDI2    */
++#define GPIO_BB_RESET          57      /* BB_RESET   */
++#define GPIO_MCU_INT_SW        115     /* MCU_INT_SW */
++#define GPIO_TC_MM_EN          89      /* TC_MM_EN   */
++
++/* control PCAP direct PIN */
++#define GPIO_WDI_AP            4       /* WDI_AP                       */
++#define GPIO_SYS_RESTART       55      /* restart PCAP power           */
++#define GPIO_AP_STANDBY        28      /* make pcap enter standby mode */
++
++/* communicate with PCAP's PIN  */
++#define GPIO_PCAP_SEC_INT      1       /* PCAP interrupt PIN to AP     */
++#define GPIO_SPI_CLK           23      /* PCAP SPI port clock          */
++#define GPIO_SPI_CE            24      /* PCAP SPI port SSPFRM         */
++#define GPIO_SPI_MOSI          25      /* PCAP SPI port SSPTXD         */
++#define GPIO_SPI_MISO          26      /* PCAP SPI port SSPRXD         */
++
++/*  blue tooth control PIN   */
++#define GPIO_BT_WAKEUP         2       /* AP wake up bluetooth module        */
++#define GPIO_BT_HOSTWAKE       14      /* bluetooth module wake up Ap module */
++#define GPIO_BT_RESET          56      /* AP reset bluetooth module          */
++
++/* control LCD high - OFF low -- ON  */
++#define GPIO_LCD_OFF           116     /* control LCD                */
++
++/*  FFUART PIN              */
++#define GPIO_ICL_FFRXD_MD      (34 | GPIO_ALT_FN_1_IN)
++#define GPIO_ICL_FFCTS_MD      (35 | GPIO_ALT_FN_1_IN)
++#define GPIO_ICL_FFTXD_MD      (39 | GPIO_ALT_FN_2_OUT)
++#define GPIO_ICL_FFRTS_MD      (41 | GPIO_ALT_FN_2_OUT)
++
++#elif defined(A780_P1_AND_EARLY)
++
++/* shakehand  with BP's PIN  */
++#define GPIO_BP_RDY            0       /* BP_RDY     */
++#define GPIO_BB_WDI            13      /* BB_WDI     */
++#define GPIO_BB_WDI2           3       /* BB_WDI2    */
++#define GPIO_BB_RESET          82      /* BB_RESET   */
++#define GPIO_MCU_INT_SW        57      /* MCU_INT_SW */
++#define GPIO_TC_MM_EN          89      /* TC_MM_EN   */
++
++/* control PCAP direct PIN */
++#define GPIO_WDI_AP            4       /* WDI_AP                       */
++#define GPIO_SYS_RESTART       55      /* restart PCAP power           */
++#define GPIO_AP_STANDBY        28      /* make pcap enter standby mode */
++
++/* communicate with PCAP's PIN  */
++#define GPIO_PCAP_SEC_INT      1       /* PCAP interrupt PIN to AP     */
++#define GPIO_SPI_CLK           29      /* PCAP SPI port clock          */
++#define GPIO_SPI_CE            24      /* PCAP SPI port SSPFRM         */
++#define GPIO_SPI_MOSI          25      /* PCAP SPI port SSPTXD         */
++#define GPIO_SPI_MISO          26      /* PCAP SPI port SSPRXD         */
++
++/*  blue tooth control PIN   */
++#define GPIO_BT_WAKEUP         2       /* AP wake up bluetooth module        */
++#define GPIO_BT_HOSTWAKE       14      /* bluetooth module wake up Ap module */
++#define GPIO_BT_RESET          56      /* AP reset bluetooth module          */
++
++/* control LCD high - OFF low -- ON  */
++#define GPIO_LCD_OFF           116     /* control LCD                */
++
++/*  FFUART PIN              */
++#define GPIO_ICL_FFRXD_MD      (53 | GPIO_ALT_FN_1_IN)
++#define GPIO_ICL_FFCTS_MD      (35 | GPIO_ALT_FN_1_IN)
++#define GPIO_ICL_FFTXD_MD      (39 | GPIO_ALT_FN_2_OUT)
++#define GPIO_ICL_FFRTS_MD      (41 | GPIO_ALT_FN_2_OUT)
++
++#else
++
++/* shakehand  with BP's PIN  */
++#define GPIO_BP_RDY            0       /* BP_RDY     */
++#define GPIO_BB_WDI            13      /* BB_WDI     */
++#define GPIO_BB_WDI2           3       /* BB_WDI2    */
++#define GPIO_BB_RESET          82      /* BB_RESET   */
++#define GPIO_MCU_INT_SW        57      /* MCU_INT_SW */
++#define GPIO_TC_MM_EN          99      /* TC_MM_EN   */
++
++/* control PCAP direct PIN */
++#define GPIO_WDI_AP            4       /* WDI_AP                       */
++#define GPIO_SYS_RESTART       55      /* restart PCAP power           */
++/*#define GPIO_AP_STANDBY        28 */     /* make pcap enter standby mode */
++
++/* communicate with PCAP's PIN  */
++#define GPIO_PCAP_SEC_INT      1       /* PCAP interrupt PIN to AP     */
++#define GPIO_SPI_CLK           29      /* PCAP SPI port clock          */
++#define GPIO_SPI_CE            24      /* PCAP SPI port SSPFRM         */
++#define GPIO_SPI_MOSI          25      /* PCAP SPI port SSPTXD         */
++#define GPIO_SPI_MISO          26      /* PCAP SPI port SSPRXD         */
++
++/*  blue tooth control PIN   */
++#define GPIO_BT_WAKEUP         28      /* AP wake up bluetooth module  */
++#define GPIO_BT_HOSTWAKE       14      /* AP wake up bluetooth module  */
++#define GPIO_BT_RESET          48      /* AP reset bluetooth module    */
++
++/* control LCD high - OFF low -- ON  */
++#define GPIO_LCD_OFF           116     /* control LCD                */
++
++/*  FFUART PIN              */
++#define GPIO_ICL_FFRXD_MD      (53 | GPIO_ALT_FN_1_IN)
++#define GPIO_ICL_FFCTS_MD      (35 | GPIO_ALT_FN_1_IN)
++#define GPIO_ICL_FFTXD_MD      (39 | GPIO_ALT_FN_2_OUT)
++#define GPIO_ICL_FFRTS_MD      (41 | GPIO_ALT_FN_2_OUT)
++
++#endif
++/*
++ * ezx platform, wake up source edge detect bit
++ */
++#define PEDR_INT_SEC            1
++
++#define GPIO_FLIP_PIN          12
++/*E680 screen lock button*/
++
++#define GPIO_LOCK_SCREEN_PIN    GPIO_FLIP_PIN
++
++/* MMC interface */
++#define GPIO_MMC_DETECT         11
++#define GPIO_MMC_CLK            32
++#define GPIO_MMC_DATA0          92
++#define GPIO_MMC_WP           107
++#define GPIO_MMC_DATA1          109
++#define GPIO_MMC_DATA2          110
++#define GPIO_MMC_DATA3          111
++#define GPIO_MMC_CMD            112
++
++/* interface function */
++#define GPIO_MMC_CLK_MD         (GPIO_MMC_CLK | GPIO_ALT_FN_2_OUT)
++#define GPIO_MMC_DATA0_MD       (GPIO_MMC_DATA0 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT)
++#define GPIO_MMC_DATA1_MD       (GPIO_MMC_DATA1 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT)
++#define GPIO_MMC_DATA2_MD       (GPIO_MMC_DATA2 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT)
++#define GPIO_MMC_DATA3_MD       (GPIO_MMC_DATA3 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT)
++
++#define GPIO_MMC_CMD_MD         (GPIO_MMC_CMD | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT)
++
++/* EMU GPIO 119 ---MUX2 120 --- MUX1   */
++#define GPIO_EMU_MUX1      120
++#define GPIO_EMU_MUX2      119
++#define GPIO_SNP_INT_CTL   86
++#define GPIO_SNP_INT_IN    87
++
++
++/* audio related pins  */
++#define AP_13MHZ_OUTPUT_PIN  9
++
++#ifdef CONFIG_ARCH_EZX_E680
++#define GPIO_VA_SEL_BUL     79
++#define GPIO_FLT_SEL_BUL    80                /* out filter select pin */
++#define GPIO_MIDI_RESET    78         /* GPIO used by MIDI chipset */
++#define GPIO_MIDI_CS       33
++#define GPIO_MIDI_IRQ      15
++#define GPIO_MIDI_NPWE     49
++#define GPIO_MIDI_RDY      18
++#endif
++
++#ifdef CONFIG_ARCH_EZX_A780
++#define GPIO_HW_ATTENUATE_A780        96      /* hw noise attenuation be used or bypassed, for receiver or louderspeaker mode */
++#endif
++
++
++/* bp status pin */
++#define GPIO_BP_STATE       41
++
++/* define usb related pin  */
++#define GPIO34_TXENB        34
++#define GPIO35_XRXD         35
++#define GPIO36_VMOUT        36
++#define GPIO39_VPOUT        39
++#define GPIO40_VPIN         40
++#define GPIO53_VMIN         53
++
++/* USB client 6 pin defination */
++#define GPIO34_TXENB_MD     (GPIO34_TXENB | GPIO_ALT_FN_1_OUT)
++#define GPIO35_XRXD_MD      (GPIO35_XRXD | GPIO_ALT_FN_2_IN)
++#define GPIO36_VMOUT_MD     (GPIO36_VMOUT | GPIO_ALT_FN_1_OUT)
++#define GPIO39_VPOUT_MD     (GPIO39_VPOUT | GPIO_ALT_FN_1_OUT)
++#define GPIO40_VPIN_MD      (GPIO40_VPIN | GPIO_ALT_FN_3_IN)
++#define GPIO53_VMIN_MD      (GPIO53_VMIN | GPIO_ALT_FN_2_IN)
++
++#define GPIO53_FFRXD_MD     (53 | GPIO_ALT_FN_1_IN)
++
+Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-pxa/pxa-regs.h
++++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h
+@@ -859,6 +859,8 @@
+ #define UP2OCR_HXOE           (1 << 17)       /* Host Port 2 Transceiver Output Enable */
+ #define UP2OCR_SEOS           (1 << 24)       /* Single-Ended Output Select */
+ 
++#define UP3OCR                __REG(0x40600024)  /* USB Port 3 Output Control register */
++
+ #define UDCCSN(x)     __REG2(0x40600100, (x) << 2)
+ #define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+ #define UDCCSR0_SA    (1 << 7)        /* Setup Active */
+@@ -1262,6 +1264,7 @@
+ #define GPIO33_nCS_5          33      /* chip select 5 */
+ #define GPIO34_FFRXD          34      /* FFUART receive */
+ #define GPIO34_MMCCS0         34      /* MMC Chip Select 0 */
++#define GPIO34_USB_P2_2               34      /* USB Port2 Pin 2 */
+ #define GPIO35_FFCTS          35      /* FFUART Clear to send */
+ #define GPIO36_FFDCD          36      /* FFUART Data carrier detect */
+ #define GPIO37_FFDSR          37      /* FFUART data set ready */
+@@ -1375,6 +1378,7 @@
+ #define GPIO18_RDY_MD         (18 | GPIO_ALT_FN_1_IN)
+ #define GPIO19_DREQ1_MD               (19 | GPIO_ALT_FN_1_IN)
+ #define GPIO20_DREQ0_MD               (20 | GPIO_ALT_FN_1_IN)
++#define GPIO22_SCLK2_MD               (22 | GPIO_ALT_FN_3_IN)
+ #define GPIO23_SCLK_MD                (23 | GPIO_ALT_FN_2_OUT)
+ #define GPIO24_SFRM_MD                (24 | GPIO_ALT_FN_2_OUT)
+ #define GPIO25_STXD_MD                (25 | GPIO_ALT_FN_2_OUT)
+@@ -1385,23 +1389,33 @@
+ #define GPIO28_BITCLK_OUT_I2S_MD      (28 | GPIO_ALT_FN_1_OUT)
+ #define GPIO29_SDATA_IN_AC97_MD       (29 | GPIO_ALT_FN_1_IN)
+ #define GPIO29_SDATA_IN_I2S_MD        (29 | GPIO_ALT_FN_2_IN)
++#define GPIO29_SCLK_MD                (29 | GPIO_ALT_FN_3_IN)
+ #define GPIO30_SDATA_OUT_AC97_MD      (30 | GPIO_ALT_FN_2_OUT)
+ #define GPIO30_SDATA_OUT_I2S_MD       (30 | GPIO_ALT_FN_1_OUT)
++#define GPIO30_USB_P3_2               (30 | GPIO_ALT_FN_3_OUT)
+ #define GPIO31_SYNC_I2S_MD    (31 | GPIO_ALT_FN_1_OUT)
+ #define GPIO31_SYNC_AC97_MD   (31 | GPIO_ALT_FN_2_OUT)
++#define GPIO31_USB_P3_6               (31 | GPIO_ALT_FN_3_OUT)
+ #define GPIO32_SDATA_IN1_AC97_MD      (32 | GPIO_ALT_FN_1_IN)
+ #define GPIO32_SYSCLK_I2S_MD  (32 | GPIO_ALT_FN_1_OUT)
+ #define GPIO32_MMCCLK_MD              ( 32 | GPIO_ALT_FN_2_OUT)
+ #define GPIO33_nCS_5_MD               (33 | GPIO_ALT_FN_2_OUT)
+ #define GPIO34_FFRXD_MD               (34 | GPIO_ALT_FN_1_IN)
+ #define GPIO34_MMCCS0_MD      (34 | GPIO_ALT_FN_2_OUT)
++#define GPIO34_USB_P2_2_MD    (34 | GPIO_ALT_FN_1_OUT)
+ #define GPIO35_FFCTS_MD               (35 | GPIO_ALT_FN_1_IN)
++#define GPIO35_USB_P2_1_MD    (35 | GPIO_ALT_FN_2_IN)
+ #define GPIO36_FFDCD_MD               (36 | GPIO_ALT_FN_1_IN)
++#define GPIO36_USB_P2_4_MD    (36 | GPIO_ALT_FN_1_OUT)
+ #define GPIO37_FFDSR_MD               (37 | GPIO_ALT_FN_1_IN)
++#define GPIO37_SFRM2_MD               (37 | GPIO_ALT_FN_2_IN)
+ #define GPIO38_FFRI_MD                (38 | GPIO_ALT_FN_1_IN)
++#define GPIO38_STXD2_MD               (38 | GPIO_ALT_FN_2_OUT)
+ #define GPIO39_MMCCS1_MD      (39 | GPIO_ALT_FN_1_OUT)
+ #define GPIO39_FFTXD_MD               (39 | GPIO_ALT_FN_2_OUT)
++#define GPIO39_USB_P2_6_MD    (39 | GPIO_ALT_FN_1_OUT)
+ #define GPIO40_FFDTR_MD               (40 | GPIO_ALT_FN_2_OUT)
++#define GPIO40_USB_P2_5_MD    (40 | GPIO_ALT_FN_3_IN)
+ #define GPIO41_FFRTS_MD               (41 | GPIO_ALT_FN_2_OUT)
+ #define GPIO42_BTRXD_MD               (42 | GPIO_ALT_FN_1_IN)
+ #define GPIO42_HWRXD_MD               (42 | GPIO_ALT_FN_3_IN)
+@@ -1426,13 +1440,17 @@
+ #define GPIO51_HWRTS_MD         (51 | GPIO_ALT_FN_1_OUT)
+ #define GPIO51_nPIOW_MD               (51 | GPIO_ALT_FN_2_OUT)
+ #define GPIO52_nPCE_1_MD      (52 | GPIO_ALT_FN_2_OUT)
++#define GPIO52_SCLK3_MD               (52 | GPIO_ALT_FN_2_OUT)
+ #define GPIO53_nPCE_2_MD      (53 | GPIO_ALT_FN_2_OUT)
+ #define GPIO53_MMCCLK_MD      (53 | GPIO_ALT_FN_1_OUT)
++#define GPIO53_FFRXD_MD               (53 | GPIO_ALT_FN_1_IN)
++#define GPIO53_USB_P2_3_MD    (53 | GPIO_ALT_FN_2_IN)
+ #define GPIO54_MMCCLK_MD      (54 | GPIO_ALT_FN_1_OUT)
+ #define GPIO54_nPCE_2_MD      (54 | GPIO_ALT_FN_2_OUT)
+ #define GPIO54_pSKTSEL_MD     (54 | GPIO_ALT_FN_2_OUT)
+ #define GPIO55_nPREG_MD               (55 | GPIO_ALT_FN_2_OUT)
+ #define GPIO56_nPWAIT_MD      (56 | GPIO_ALT_FN_1_IN)
++#define GPIO56_USB_P3_4               (56 | GPIO_ALT_FN_1_OUT)
+ #define GPIO57_nIOIS16_MD     (57 | GPIO_ALT_FN_1_IN)
+ #define GPIO58_LDD_0_MD               (58 | GPIO_ALT_FN_2_OUT)
+ #define GPIO59_LDD_1_MD               (59 | GPIO_ALT_FN_2_OUT)
+@@ -1468,13 +1486,19 @@
+ #define GPIO80_nCS_4_MD               (80 | GPIO_ALT_FN_2_OUT)
+ #define GPIO81_NSSP_CLK_OUT   (81 | GPIO_ALT_FN_1_OUT)
+ #define GPIO81_NSSP_CLK_IN    (81 | GPIO_ALT_FN_1_IN)
++#define GPIO81_STXD3_MD               (81 | GPIO_ALT_FN_1_OUT)
+ #define GPIO82_NSSP_FRM_OUT   (82 | GPIO_ALT_FN_1_OUT)
+ #define GPIO82_NSSP_FRM_IN    (82 | GPIO_ALT_FN_1_IN)
+ #define GPIO83_NSSP_TX        (83 | GPIO_ALT_FN_1_OUT)
+ #define GPIO83_NSSP_RX        (83 | GPIO_ALT_FN_2_IN)
++#define GPIO83_SFRM3_MD               (83 | GPIO_ALT_FN_1_IN)
+ #define GPIO84_NSSP_TX        (84 | GPIO_ALT_FN_1_OUT)
+ #define GPIO84_NSSP_RX        (84 | GPIO_ALT_FN_2_IN)
+ #define GPIO85_nPCE_1_MD      (85 | GPIO_ALT_FN_1_OUT)
++#define GPIO88_SRXD2_MD               (88 | GPIO_ALT_FN_2_IN)
++#define GPIO89_SRXD3_MD               (89 | GPIO_ALT_FN_1_IN)
++#define GPIO90_USB_P3_5               (90 | GPIO_ALT_FN_2_IN)
++#define GPIO91_USB_P3_1               (91 | GPIO_ALT_FN_2_IN)
+ #define GPIO92_MMCDAT0_MD     (92 | GPIO_ALT_FN_1_OUT)
+ #define GPIO102_nPCE_1_MD     (102 | GPIO_ALT_FN_1_OUT)
+ #define GPIO104_pSKTSEL_MD    (104 | GPIO_ALT_FN_1_OUT)
+@@ -1486,6 +1510,7 @@
+ #define GPIO112_MMCCMD_MD     (112 | GPIO_ALT_FN_1_OUT)
+ #define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT)
+ #define GPIO113_AC97_RESET_N_MD       (113 | GPIO_ALT_FN_2_OUT)
++#define GPIO113_USB_P3_3      (113 | GPIO_ALT_FN_3_IN)
+ #define GPIO117_I2CSCL_MD     (117 | GPIO_ALT_FN_1_IN)
+ #define GPIO118_I2CSDA_MD     (118 | GPIO_ALT_FN_1_IN)
+ 
+@@ -1501,6 +1526,7 @@
+ #define PFER          __REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
+ #define PEDR          __REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
+ #define PCFR          __REG(0x40F0001C)  /* Power Manager General Configuration Register */
++#define PGSR(x)               (__REG(0x40F00020 + ((unsigned long)(x)/32*4)))
+ #define PGSR0         __REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
+ #define PGSR1         __REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
+ #define PGSR2         __REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
+Index: linux-2.6.24/arch/arm/boot/compressed/head.S
+===================================================================
+--- linux-2.6.24.orig/arch/arm/boot/compressed/head.S
++++ linux-2.6.24/arch/arm/boot/compressed/head.S
+@@ -117,6 +117,9 @@
+               mov     r0, r0
+               .endr
+ 
++              mov     r1, #0x300              @ mach_id 0x363 is official EZX
++              orr     r1, r1, #0x63           @ bootloader JUMP doesn't set r1
++
+               b       1f
+               .word   0x016f2818              @ Magic numbers to help the loader
+               .word   start                   @ absolute load/run zImage address
+Index: linux-2.6.24/include/asm-arm/arch-pxa/uncompress.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-pxa/uncompress.h
++++ linux-2.6.24/include/asm-arm/arch-pxa/uncompress.h
+@@ -14,14 +14,14 @@
+ #define STUART                ((volatile unsigned long *)0x40700000)
+ #define HWUART                ((volatile unsigned long *)0x41600000)
+ 
+-#define UART          FFUART
++#define UART          STUART
+ 
+ 
+ static inline void putc(char c)
+ {
+-      while (!(UART[5] & 0x20))
++/*    while (!(UART[5] & 0x40))
+               barrier();
+-      UART[0] = c;
++      UART[0] = c;*/
+ }
+ 
+ /*
+Index: linux-2.6.24/arch/arm/mm/init.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mm/init.c
++++ linux-2.6.24/arch/arm/mm/init.c
+@@ -240,6 +240,10 @@
+        */
+       reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
+                            boot_pages << PAGE_SHIFT);
++#ifdef CONFIG_PXA_EZX
++      /* reserve the first page memory for exiting sleep and user off */
++      reserve_bootmem_node(pgdat, PHYS_OFFSET, PAGE_SIZE);
++#endif
+ 
+ #ifdef CONFIG_BLK_DEV_INITRD
+       /*
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx-a780.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/arch/arm/mach-pxa/ezx-a780.c
+@@ -0,0 +1,88 @@
++/*
++ *  ezx-a780.c - Code specific to A780 GSM Phone.
++ *
++ *  Copyright (c) 2007 OpenEZX Team (www.openezx.org)
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fb.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/pxafb.h>
++#include <asm/arch/ezx.h>
++
++#include "generic.h"
++
++extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
++extern void ezx_backlight_power(int);
++
++static struct pxafb_mode_info mode_a780 = {
++      .pixclock       = 150000,
++      .xres           = 240,
++      .yres           = 320,
++      .bpp            = 16,
++      .hsync_len      = 10,
++      .left_margin    = 20,
++      .right_margin   = 10,
++      .vsync_len      = 2,
++      .upper_margin   = 3,
++      .lower_margin   = 2,
++      .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++};
++
++static struct pxafb_mach_info a780_fb_info = {
++      .modes          = &mode_a780,
++      .num_modes      = 1,
++      .lccr0          = 0x002008F8,
++      .lccr3          = 0x0430FF09,
++      .pxafb_backlight_power = &ezx_backlight_power,
++      .pxafb_lcd_power = &ezx_lcd_power,
++};
++
++static struct platform_device *devices[] __initdata = {
++};
++
++static void __init a780_init(void)
++{
++      /* setup sleep mode values */
++      PWER  = 0xc0007803;             /* disable usb, GPIO15 NC */
++      PFER  = 0x00007803;
++      PRER  = 0x00001802;
++      PGSR0 = 0x00000010;
++      PGSR1 = 0x02800000;
++      PGSR2 = 0x00040000;
++      PGSR3 = 0x00000008;
++      PCFR  = PCFR_DC_EN | PCFR_FS | PCFR_FP | PCFR_OPDE;
++      PSLR  = 0x05800f00;
++
++      set_pxa_fb_info(&a780_fb_info);
++
++      /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
++      pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);
++      clr_GPIO(GPIO_EMU_MUX1);
++      pxa_gpio_mode(GPIO_EMU_MUX2|GPIO_OUT);
++      clr_GPIO(GPIO_EMU_MUX2);
++
++      platform_add_devices(devices, ARRAY_SIZE(devices));
++}
++
++MACHINE_START(EZX, "Motorola Ezx Platform")
++      /* Maintainer: OpenEZX Team (www.openezx.org) */
++      .phys_io        = 0x40000000,
++      .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
++      .boot_params    = 0xa0000100,
++      .map_io         = pxa_map_io,
++      .init_irq       = pxa27x_init_irq,
++      .timer          = &pxa_timer,
++      .init_machine   = a780_init,
++MACHINE_END
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx-e2.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/arch/arm/mach-pxa/ezx-e2.c
+@@ -0,0 +1,70 @@
++/*
++ *  ezx-e2.c - Code specific to E2 GSM Phone.
++ *
++ *  Copyright (c) 2007 OpenEZX Team (www.openezx.org)
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fb.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/pxafb.h>
++#include <asm/arch/ezx.h>
++
++#include "generic.h"
++
++extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
++extern void ezx_backlight_power(int);
++
++static struct pxafb_mode_info mode_e2 = {
++      .pixclock = 192308,
++      xres = 240,
++      .yres = 320,
++      .bpp = 8,
++      .hsync_len = 10,
++      .left_margin = 20,
++      .right_margin = 10,
++      .vsync_len = 2,
++      .upper_margin = 3,
++      .lower_margin = 2,
++      .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++};
++
++static struct pxafb_mach_info e2_fb_info = {
++      .modes = &mode_e2,
++      .num_modes = 1,
++      .lccr0 = 0x022008B8,
++      .lccr3 = 0xC130FF13,
++      .pxafb_backlight_power = &ezx_backlight_power,
++      .pxafb_lcd_power = &ezx_lcd_power,
++};
++
++static struct platform_device *devices[] __initdata = {
++};
++
++static void __init e2_init(void)
++{
++      set_pxa_fb_info(&e2_fb_info);
++
++      platform_add_devices(devices, ARRAY_SIZE(devices));
++}
++
++MACHINE_START(EZX, "Motorola Ezx Platform")
++      /* Maintainer: OpenEZX Team (www.openezx.org) */
++      .phys_io        = 0x40000000,
++      .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
++      .boot_params    = 0xa0000200,
++      .map_io         = pxa_map_io,
++      .init_irq       = pxa27x_init_irq,
++      .timer          = &pxa_timer,
++      .init_machine   = e2_init,
++MACHINE_END
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx-e680.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/arch/arm/mach-pxa/ezx-e680.c
+@@ -0,0 +1,87 @@
++/*
++ *  ezx-e680.c - Code specific to E680 GSM Phone.
++ *
++ *  Copyright (c) 2007 OpenEZX Team (www.openezx.org)
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fb.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/pxafb.h>
++#include <asm/arch/ezx.h>
++
++#include "generic.h"
++
++extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
++extern void ezx_backlight_power(int);
++
++static struct pxafb_mode_info mode_e680 = {
++      .pixclock       = 150000,
++      .xres           = 240,
++      .yres           = 320,
++      .bpp            = 16,
++      .hsync_len      = 10,
++      .left_margin    = 20,
++      .right_margin   = 10,
++      .vsync_len      = 2,
++      .upper_margin   = 3,
++      .lower_margin   = 2,
++      .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++};
++
++static struct pxafb_mach_info e680_fb_info = {
++      .modes          = &mode_e680,
++      .num_modes      = 1,
++      .lccr0          = 0x002008F8,
++      .lccr3          = 0x0430FF09,
++      .pxafb_backlight_power = &ezx_backlight_power,
++      .pxafb_lcd_power = &ezx_lcd_power,
++};
++
++static struct platform_device *devices[] __initdata = {
++};
++
++static void __init e680_init(void)
++{
++      /* setup sleep mode values */
++      PWER  = 0xc000f803;             /* disable usb 0xdc00f803; */
++      PFER  = 0x0000f803;
++      PRER  = 0x00001802;
++      PGSR0 = 0x00000010;
++      PGSR1 = 0x02800000;
++      PGSR2 = 0x00040000;
++      PGSR3 = 0x00000000;
++      PCFR  = PCFR_DC_EN | PCFR_FS | PCFR_FP | PCFR_OPDE;
++      PSLR  = 0x05800f00;
++
++      set_pxa_fb_info(&e680_fb_info);
++
++      /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */
++      pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT);
++      clr_GPIO(GPIO_EMU_MUX1);
++      pxa_gpio_mode(GPIO_EMU_MUX2|GPIO_OUT);
++      clr_GPIO(GPIO_EMU_MUX2);
++
++      platform_add_devices(devices, ARRAY_SIZE(devices));
++}
++
++MACHINE_START(EZX, "Motorola Ezx Platform")
++      /* Maintainer: OpenEZX Team (www.openezx.org) */
++      .phys_io        = 0x40000000,
++      .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
++      .boot_params    = 0xa0000100,
++      .map_io         = pxa_map_io,
++      .init_irq       = pxa27x_init_irq,
++      .timer          = &pxa_timer,
++      .init_machine   = e680_init,
++MACHINE_END
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx-a1200.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/arch/arm/mach-pxa/ezx-a1200.c
+@@ -0,0 +1,70 @@
++/*
++ *  ezx-a1200.c - Code specific to A1200 GSM Phone.
++ *
++ *  Copyright (c) 2007 OpenEZX Team (www.openezx.org)
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fb.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/pxafb.h>
++#include <asm/arch/ezx.h>
++
++#include "generic.h"
++
++extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
++extern void ezx_backlight_power(int);
++
++static struct pxafb_mode_info mode_a1200 = {
++      .pixclock = 192308,
++      .xres = 240,
++      .yres = 320,
++      .bpp = 8,
++      .hsync_len = 10,
++      .left_margin = 20,
++      .right_margin = 10,
++      .vsync_len = 2,
++      .upper_margin = 3,
++      .lower_margin = 2,
++      .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++};
++
++static struct pxafb_mach_info a1200_fb_info = {
++      .modes = &mode_a1200,
++      .num_modes = 1,
++      .lccr0 = 0x022008B8,
++      .lccr3 = 0xC130FF13,
++      .pxafb_backlight_power = &ezx_backlight_power,
++      .pxafb_lcd_power = &ezx_lcd_power,
++};
++
++static struct platform_device *devices[] __initdata = {
++};
++
++static void __init a1200_init(void)
++{
++      set_pxa_fb_info(&a1200_fb_info);
++
++      platform_add_devices(devices, ARRAY_SIZE(devices));
++}
++
++MACHINE_START(EZX, "Motorola Ezx Platform")
++      /* Maintainer: OpenEZX Team (www.openezx.org) */
++      .phys_io        = 0x40000000,
++      .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
++      .boot_params    = 0xa0000200,
++      .map_io         = pxa_map_io,
++      .init_irq       = pxa27x_init_irq,
++      .timer          = &pxa_timer,
++      .init_machine   = a1200_init,
++MACHINE_END
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx-e6.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/arch/arm/mach-pxa/ezx-e6.c
+@@ -0,0 +1,70 @@
++/*
++ *  ezx-e6.c - Code specific to E6 GSM Phone.
++ *
++ *  Copyright (c) 2007 OpenEZX Team (www.openezx.org)
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/fb.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/pxafb.h>
++#include <asm/arch/ezx.h>
++
++#include "generic.h"
++
++extern void ezx_lcd_power(int, struct fb_var_screeninfo *);
++extern void ezx_backlight_power(int);
++
++static struct pxafb_mode_info mode_e6 = {
++      .pixclock = 192308,
++      .xres = 240,
++      .yres = 320,
++      .bpp = 8,
++      .hsync_len = 10,
++      .left_margin = 20,
++      .right_margin = 10,
++      .vsync_len = 2,
++      .upper_margin = 3,
++      .lower_margin = 2,
++      .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++};
++
++static struct pxafb_mach_info e6_fb_info = {
++      .modes = &mode_e6,
++      .num_modes = 1,
++      .lccr0 = 0x022008B8,
++      .lccr3 = 0xC130FF13,
++      .pxafb_backlight_power = &ezx_backlight_power,
++      .pxafb_lcd_power = &ezx_lcd_power,
++};
++
++static struct platform_device *devices[] __initdata = {
++};
++
++static void __init e6_init(void)
++{
++      set_pxa_fb_info(&e6_fb_info);
++
++      platform_add_devices(devices, ARRAY_SIZE(devices));
++}
++
++MACHINE_START(EZX, "Motorola Ezx Platform")
++      /* Maintainer: OpenEZX Team (www.openezx.org) */
++      .phys_io        = 0x40000000,
++      .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
++      .boot_params    = 0xa0000200,
++      .map_io         = pxa_map_io,
++      .init_irq       = pxa27x_init_irq,
++      .timer          = &pxa_timer,
++      .init_machine   = e6_init,
++MACHINE_END
+Index: linux-2.6.24/MAINTAINERS
+===================================================================
+--- linux-2.6.24.orig/MAINTAINERS
++++ linux-2.6.24/MAINTAINERS
+@@ -2581,6 +2581,15 @@
+ W:    http://popies.net/meye/
+ S:    Maintained
+ 
++MOTOROLA EZX SMARTPHONES (E680, A780, A1200, E2, E6)
++P:    Daniel Ribeiro
++M:    wyrm@openezx.org
++P:    Harald Welte
++M:    laforge@openezx.org
++L:    openezx-devel@lists.openezx.org
++W:    http://www.openezx.org/
++S:    Maintained
++
+ MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
+ P:    Pavel Pisa
+ M:    ppisa@pikron.com

diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-emu.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-emu.patch
new file mode 100644 (file)
index 0000000..f7ae477
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/ezx-emu.patch
@@ -0,0 +1,269 @@
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx-emu.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/arch/arm/mach-pxa/ezx-emu.c
+@@ -0,0 +1,219 @@
++/*
++ *  EMU Driver for Motorola EZX phones
++ *
++ *  Copyright (c) 2007 Daniel Ribeiro <wyrm@openezx.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/arch/hardware.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/ezx.h>
++#include <asm/arch/ezx-pcap.h>
++#include <asm/arch/udc.h>
++
++static struct pxa2xx_udc_mach_info ezx_udc_info;
++extern int ezx_pcap_bit_set(u_int32_t, u_int8_t);
++extern int ezx_pcap_read_bit(u_int32_t);
++static int emu_irq_usb4v;
++static int emu_irq_usb1v;
++
++
++#if defined CONFIG_EZX_EMU_USB
++#define emu_switch_to_default() emu_switch_to_usb()
++#elif defined CONFIG_EZX_EMU_UART
++#define emu_switch_to_default() emu_switch_to_uart()
++#else
++#define emu_switch_to_default() emu_switch_to_nothing()
++#endif
++
++static void emu_switch_to_usb(void)
++{
++      printk(KERN_NOTICE "EMU: Switching to USB\n");
++      pxa_gpio_mode(GPIO34_USB_P2_2_MD);
++      pxa_gpio_mode(GPIO35_USB_P2_1_MD);
++      pxa_gpio_mode(GPIO36_USB_P2_4_MD);
++      pxa_gpio_mode(GPIO39_USB_P2_6_MD);
++      pxa_gpio_mode(GPIO40_USB_P2_5_MD);
++      pxa_gpio_mode(GPIO53_USB_P2_3_MD);
++      UP2OCR = 0x02000000;
++      ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 1);
++      ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_FSENB, 0);
++      ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN, 1);
++      clr_GPIO(GPIO_EMU_MUX1);
++      clr_GPIO(GPIO_EMU_MUX2);
++}
++
++static void emu_switch_to_uart(void)
++{
++      printk(KERN_NOTICE "EMU: Switching to UART\n");
++      ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN,0);
++      ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 0);
++      ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232_DIR, 1);
++      set_GPIO(GPIO39_FFTXD);
++      pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT);
++      set_GPIO(GPIO34_TXENB);
++      pxa_gpio_mode(GPIO35_XRXD | GPIO_IN);
++      pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN);
++      pxa_gpio_mode(GPIO40_VPIN | GPIO_IN);
++      pxa_gpio_mode(GPIO39_FFTXD_MD);
++      pxa_gpio_mode(GPIO53_FFRXD_MD);
++      pxa_set_cken(CKEN_FFUART, 1);
++      clr_GPIO(GPIO_EMU_MUX1);
++      clr_GPIO(GPIO_EMU_MUX2);
++
++}
++
++static void emu_switch_to_audio(int stereo)
++{
++      printk(KERN_NOTICE "EMU: Switching to audio(%s)\n", (stereo ? "stereo" : "mono"));
++      clr_GPIO(GPIO39_VPOUT);
++      if (stereo) {
++              pxa_gpio_mode(GPIO34_TXENB | GPIO_IN);
++              clr_GPIO(GPIO39_VPOUT);
++      } else {
++              pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT);
++              set_GPIO(GPIO34_TXENB);
++      }
++
++      pxa_gpio_mode(GPIO35_XRXD  | GPIO_IN);
++      pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN);
++      pxa_gpio_mode(GPIO39_VPOUT | GPIO_IN);
++      pxa_gpio_mode(GPIO40_VPIN  | GPIO_IN);
++      pxa_gpio_mode(GPIO53_VMIN  | GPIO_IN);
++      set_GPIO(GPIO_EMU_MUX1);
++      if (stereo)
++              set_GPIO(GPIO_EMU_MUX2);
++      else
++              clr_GPIO(GPIO_EMU_MUX2);
++}
++
++static void emu_switch_to_nothing(void)
++{
++      printk(KERN_NOTICE "EMU: Switching to disconnected\n");
++      ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN, 0);
++      ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 1);
++      pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT);
++      set_GPIO(GPIO34_TXENB);
++      pxa_gpio_mode(GPIO35_XRXD  | GPIO_IN);
++      pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN);
++      pxa_gpio_mode(GPIO39_VPOUT | GPIO_IN);
++      pxa_gpio_mode(GPIO40_VPIN  | GPIO_IN);
++      pxa_gpio_mode(GPIO53_VMIN  | GPIO_IN);
++}
++
++
++static irqreturn_t emu_irq(int irq, void *data)
++{
++      switch (irq) {
++      case EZX_IRQ_USB4V:
++              if(ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB4V)))
++                      emu_switch_to_default();
++              break;
++      case EZX_IRQ_USB1V:
++              if(!ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB1V)))
++                      emu_switch_to_nothing();
++              break;
++      }
++
++      return IRQ_HANDLED;
++}
++
++static int __init ezx_emu_probe(struct platform_device *dev)
++{
++      pxa_gpio_mode(GPIO_SNP_INT_IN | GPIO_IN);
++      pxa_gpio_mode(GPIO_EMU_MUX1 | GPIO_OUT);
++      pxa_gpio_mode(GPIO_EMU_MUX2 | GPIO_OUT);
++
++      emu_irq_usb4v = platform_get_irq(dev, 0);
++      if(emu_irq_usb4v < 0) {
++              printk(KERN_ERR "Unable to get IRQ for USB4V!\n");
++              return emu_irq_usb4v;
++      }
++      emu_irq_usb1v = platform_get_irq(dev, 1);
++      if(emu_irq_usb1v < 0) {
++              printk(KERN_ERR "Unable to get IRQ for USB1V!\n");
++              return emu_irq_usb1v;
++      }
++
++      request_irq(emu_irq_usb4v, &emu_irq, IRQF_DISABLED, "usb 4v", NULL);
++      request_irq(emu_irq_usb1v, &emu_irq, IRQF_DISABLED, "usb 1v", NULL);
++
++      pxa_set_udc_info(&ezx_udc_info);
++
++      if(ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB4V)))
++              emu_switch_to_default();
++      else
++              emu_switch_to_nothing();
++
++      return 0;
++}
++
++static int ezx_emu_remove(struct platform_device *dev)
++{
++      free_irq(emu_irq_usb4v, NULL);
++      free_irq(emu_irq_usb1v, NULL);
++
++      return 0;
++}
++
++/* USB Device Controller */
++static int udc_connected_status;
++static void ezx_udc_command(int cmd)
++{
++      switch (cmd) {
++      case PXA2XX_UDC_CMD_DISCONNECT:
++              printk(KERN_NOTICE "USB cmd disconnect\n");
++              ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,0);
++              udc_connected_status = 0;
++              break;
++      case PXA2XX_UDC_CMD_CONNECT:
++              printk(KERN_NOTICE "USB cmd connect\n");
++              ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,1);
++              udc_connected_status = 1;
++              break;
++      }
++}
++
++static int ezx_udc_is_connected(void)
++{
++      return udc_connected_status;
++}
++
++static struct pxa2xx_udc_mach_info ezx_udc_info __initdata = {
++      .udc_is_connected       = ezx_udc_is_connected,
++      .udc_command            = ezx_udc_command,
++};
++
++static struct platform_driver ezxemu_driver = {
++      .probe          = ezx_emu_probe,
++      .remove         = ezx_emu_remove,
++      .driver         = {
++              .name   = "ezx-emu",
++              .owner  = THIS_MODULE,
++      },
++};
++
++int __init ezx_emu_init(void)
++{
++      return platform_driver_register(&ezxemu_driver);
++}
++
++void ezx_emu_fini(void)
++{
++      return platform_driver_unregister(&ezxemu_driver);
++}
++
++module_init(ezx_emu_init);
++module_exit(ezx_emu_fini);
++
++MODULE_DESCRIPTION("Motorola Enchanced Mini Usb driver");
++MODULE_AUTHOR("Daniel Ribeiro <wyrm@openezx.org>");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.24/arch/arm/mach-pxa/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/Kconfig
++++ linux-2.6.24/arch/arm/mach-pxa/Kconfig
+@@ -142,6 +142,28 @@
+ config EZX_PCAP
+       bool "PCAP Support"
+ 
++config EZX_EMU
++      bool "Motorola Enchanced Mini Usb"
++      depends on EZX_PCAP
++
++if EZX_EMU
++
++choice
++      prompt "Select default EMU mode"
++
++config EZX_EMU_USB
++      bool "USB"
++
++config EZX_EMU_UART
++      bool "UART"
++
++config EZX_EMU_NOTHING
++      bool "nothing"
++
++endchoice
++
++endif
++
+ endif
+ 
+ endmenu
+Index: linux-2.6.24/arch/arm/mach-pxa/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/Makefile
++++ linux-2.6.24/arch/arm/mach-pxa/Makefile
+@@ -38,6 +38,7 @@
+ obj-$(CONFIG_PXA_EZX_E6)      += ezx-e6.o
+ obj-$(CONFIG_EZX_BP)          += ezx-bp.o
+ obj-$(CONFIG_EZX_PCAP)                += ezx-pcap.o
++obj-$(CONFIG_EZX_EMU)         += ezx-emu.o
+ 
+ # Support for blinky lights
+ led-y := leds.o

diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-enable-stuart.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-enable-stuart.patch
new file mode 100644 (file)
index 0000000..6f1a2c1
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/ezx-enable-stuart.patch
@@ -0,0 +1,99 @@
+Index: linux-2.6.21/arch/arm/boot/compressed/head.S
+===================================================================
+--- linux-2.6.21.orig/arch/arm/boot/compressed/head.S  2007-05-19 11:22:56.000000000 -0300
++++ linux-2.6.21/arch/arm/boot/compressed/head.S       2007-05-19 11:50:29.000000000 -0300
+@@ -10,6 +10,7 @@
+  */
+ #include <linux/linkage.h>
+ 
++#define DEBUG
+ /*
+  * Debugging stuff
+  *
+@@ -117,6 +118,8 @@
+               mov     r0, r0
+               .endr
+ 
++              inituart r10, r11
++
+               mov     r1, #0x300              @ mach_id 0x363 is official EZX
+               orr     r1, r1, #0x63           @ bootloader JUMP doesn't set r1
+ 
+Index: linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h
+===================================================================
+--- linux-2.6.21.orig/include/asm-arm/arch-pxa/uncompress.h    2007-05-19 11:22:56.000000000 -0300
++++ linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h 2007-05-19 11:30:38.000000000 -0300
+@@ -19,9 +19,9 @@
+ 
+ static inline void putc(char c)
+ {
+-/*    while (!(UART[5] & 0x40))
++      while (!(UART[5] & 0x40))
+               barrier();
+-      UART[0] = c;*/
++      UART[0] = c;
+ }
+ 
+ /*
+Index: linux-2.6.21/include/asm-arm/arch-pxa/debug-macro.S
+===================================================================
+--- linux-2.6.21.orig/include/asm-arm/arch-pxa/debug-macro.S   2007-05-19 11:30:54.000000000 -0300
++++ linux-2.6.21/include/asm-arm/arch-pxa/debug-macro.S        2007-05-19 11:49:35.000000000 -0300
+@@ -14,11 +14,52 @@
+ #include "hardware.h"
+ 
+               .macro  addruart,rx
+-              mrc     p15, 0, \rx, c1, c0
+-              tst     \rx, #1                 @ MMU enabled?
+-              moveq   \rx, #0x40000000                @ physical
+-              movne   \rx, #io_p2v(0x40000000)        @ virtual
+-              orr     \rx, \rx, #0x00100000
++@             mrc     p15, 0, \rx, c1, c0
++@             tst     \rx, #1                 @ MMU enabled?
++              mov     \rx, #0x40000000
++@             moveq   \rx, #0x40000000                @ physical
++@             movne   \rx, #io_p2v(0x40000000)        @ virtual
++              orr     \rx, \rx, #0x00700000
++              .endm
++
++              .macro  inituart,rd,rx
++              ldr     \rd, =0x41300004        @ CKEN
++              ldr     \rx, [\rd]
++              orr     \rx, \rx, #0x20
++              str     \rx, [\rd]
++
++              ldr     \rd, =0x40E0005C
++              ldr     \rx, [\rd]
++              bic     \rx, \rx, #0xF0000000   @ clear GPIO46/47 config
++              orr     \rx, \rx, #0x60000000   @ set GPIO46: AF2, GPIO47: AF1
++              str     \rx, [\rd]
++              ldr     \rd, =0x40E00010
++              ldr     \rx, [\rd]
++              bic     \rx, \rx, #0x0000c000   @ clear GPIO46/47 direction
++              orr     \rx, \rx, #0x00008000   @ set GPIO 47 out, 46 in
++              str     \rx, [\rd]
++
++              addruart \rd
++              mov     \rx, #0x83              @ DLAB = 1
++              strb    \rx, [\rd, #0x0c]
++
++              mov     \rx, #0x08              @ Divisor 8 => 115200 bps
++              strb    \rx, [\rd, #0x00]
++
++              mov     \rx, #0x00
++              strb    \rx, [\rd, #0x04]       @ Divisor high = 0
++
++              mov     \rx, #0x03
++              strb    \rx, [\rd, #0x0c]       @ DLAB = 0, n81
++
++              mov     \rx, #0x00
++              strb    \rx, [\rd, #0x10]       @ MCR = 0
++
++              mov     \rx, #0x00
++              strb    \rx, [\rd, #0x28]       @ disable autobaud
++
++              mov     \rx, #0x40
++              strb    \rx, [\rd, #0x04]       @ IER UUE (UART Enable)
+               .endm
+ 
+ #define UART_SHIFT    2

diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-eoc.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-eoc.patch
new file mode 100644 (file)
index 0000000..b7247b8
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/ezx-eoc.patch
@@ -0,0 +1,295 @@
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx-eoc.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/arch/arm/mach-pxa/ezx-eoc.c
+@@ -0,0 +1,261 @@
++/*
++ *  EZX EOC Driver for Motorola EZX phones
++ *
++ *  Copyright (C) 2007 Alex Zhang <celeber2@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/i2c.h>
++#include <linux/platform_device.h>
++
++#include <asm/arch/hardware.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/ezx.h>
++#include <asm/arch/udc.h>
++
++#if 1
++#define EOC_DBG printk
++#else
++#define EOC_DBG(x, args...)
++#endif
++
++#define REG_INT_STATUS 32
++#define REG_INT_MASK 33
++#define REG_INT_SENSE 34
++#define REG_POWER_CONTROL_0 35
++#define REG_POWER_CONTROL_1 36
++#define REG_CONN_CONTROL 37
++
++#define EOC_REG_ADDR_SIZE  1
++#define EOC_REG_DATA_SIZE  3
++#define EOC_FUNC_NOTHING 0
++#define EOC_FUNC_USB_NET 1
++
++static const char eoc_i2c_driver_name[] = "ezx-eoc";
++static int eoc_func = EOC_FUNC_USB_NET;
++static struct pxa2xx_udc_mach_info ezx_udc_info;
++
++static int ezx_eoc_attach_adapter(struct i2c_adapter *adapter);
++static int ezx_eoc_detach_client(struct i2c_client *client);
++
++static struct i2c_client *eoc_i2c_client = NULL;
++
++static struct i2c_driver eoc_i2c_driver = {
++      .driver = {
++              .name   = (char *)eoc_i2c_driver_name,
++      },
++      .attach_adapter = ezx_eoc_attach_adapter,
++      .detach_client  = ezx_eoc_detach_client,
++};
++
++int eoc_reg_read(int reg, unsigned int *reg_value)
++{
++      unsigned char reg_num = reg;
++      unsigned char value[EOC_REG_DATA_SIZE];
++      int retval;
++
++      struct i2c_msg msgs[2] =
++      {
++              { eoc_i2c_client->addr, 0, EOC_REG_ADDR_SIZE, &reg_num },
++              { eoc_i2c_client->addr, I2C_M_RD, EOC_REG_DATA_SIZE, value }
++      };
++
++      /* transfer message to client */
++      retval = i2c_transfer(eoc_i2c_client->adapter, msgs, 2);
++      if (retval < 0)
++              return retval;
++
++      *reg_value  = (value[2] <<  0);
++      *reg_value |= (value[1] <<  8);
++      *reg_value |= (value[0] << 16);
++      return 0;
++}
++
++int eoc_reg_write(int reg, unsigned int reg_value)
++{
++      unsigned char value[EOC_REG_ADDR_SIZE + EOC_REG_DATA_SIZE];
++      int retval;
++
++      /* Copy the data into a buffer into the correct format */
++      value[0] = reg;
++      value[1] = (reg_value >> 16) & 0xFF;
++      value[2] = (reg_value >>  8) & 0xFF;
++      value[3] = (reg_value >>  0) & 0xFF;
++
++      /* Write the data to the EOC */
++      retval = i2c_master_send (eoc_i2c_client, value, EOC_REG_ADDR_SIZE + EOC_REG_DATA_SIZE);
++      if (retval < 0)
++              return retval;
++      return 0;
++}
++
++static void eoc_switch_to_usb(void)
++{
++      EOC_DBG("EOC: Switching to USB\n");
++      pxa_gpio_mode(GPIO34_USB_P2_2_MD);
++      pxa_gpio_mode(GPIO35_USB_P2_1_MD);
++      pxa_gpio_mode(GPIO36_USB_P2_4_MD);
++      pxa_gpio_mode(GPIO39_USB_P2_6_MD);
++      pxa_gpio_mode(GPIO40_USB_P2_5_MD);
++      pxa_gpio_mode(GPIO53_USB_P2_3_MD);
++      UP2OCR = 0x02000000;
++      /* FIXME change eoc bits to USB */
++
++}
++
++static void eoc_switch_to_nothing(void)
++{
++      EOC_DBG("EOC: Switching do disconnected\n");
++      pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT);
++      set_GPIO(GPIO34_TXENB);
++      pxa_gpio_mode(GPIO35_XRXD  | GPIO_IN);
++      pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN);
++      pxa_gpio_mode(GPIO39_VPOUT | GPIO_IN);
++      pxa_gpio_mode(GPIO40_VPIN  | GPIO_IN);
++      pxa_gpio_mode(GPIO53_VMIN  | GPIO_IN);
++      /* FIXME disconnect mini usb port */
++}
++
++static void eoc_switch_to_default(void)
++{
++      switch (eoc_func) {
++      case EOC_FUNC_USB_NET:
++              eoc_switch_to_usb();
++              break;
++      case EOC_FUNC_NOTHING:
++              eoc_switch_to_nothing();
++              break;
++      }
++}
++
++static int ezx_eoc_attach_adapter(struct i2c_adapter *adapter)
++{
++      int err = 0;
++      EOC_DBG(">>>>attach adapter enter\n");
++
++      if (eoc_i2c_client != NULL) {
++              EOC_DBG(">>>>already loaded!!!\n");
++              return 0;
++      }
++
++      if (!(eoc_i2c_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL)))
++              return -ENOMEM;
++
++      eoc_i2c_client->addr = 0x17;
++      eoc_i2c_client->adapter = adapter;
++      eoc_i2c_client->driver = &eoc_i2c_driver;
++      eoc_i2c_client->flags = 0;
++      strlcpy(eoc_i2c_client->name, eoc_i2c_driver_name, I2C_NAME_SIZE);
++
++      if ((err = i2c_attach_client(eoc_i2c_client))) {
++              kfree(eoc_i2c_client);
++              eoc_i2c_client = NULL;
++              return err;
++      }
++      eoc_reg_write(REG_INT_MASK, 0x0000FEF);
++      eoc_reg_write(REG_POWER_CONTROL_0, 0x0000C00);
++      eoc_reg_write(REG_POWER_CONTROL_1, 0x000000C);
++      eoc_reg_write(REG_CONN_CONTROL,0x0021044);
++
++      eoc_switch_to_default();
++      EOC_DBG(">>>>attach adapter exit\n");
++      return 0;
++
++}
++
++static int ezx_eoc_detach_client(struct i2c_client *client)
++{
++      return i2c_detach_client(client);
++}
++
++static int __init ezx_eoc_probe(struct platform_device *dev)
++{
++      int ret;
++
++      ret = i2c_add_driver(&eoc_i2c_driver);
++      if (ret != 0)
++              return -EINVAL;
++
++      pxa_set_udc_info(&ezx_udc_info);
++
++      return 0;
++}
++
++static int ezx_eoc_remove(struct platform_device *dev)
++{
++      i2c_del_driver(&eoc_i2c_driver);
++  return 0;
++}
++
++static int ezx_eoc_suspend(struct platform_device *dev, pm_message_t state)
++{
++      eoc_switch_to_nothing();
++      return 0;
++}
++
++static int ezx_eoc_resume(struct platform_device *dev)
++{
++      eoc_switch_to_default();
++      return 0;
++}
++
++/* USB Device Controller */
++static int udc_connected_status;
++static void ezx_udc_command(int cmd)
++{
++      switch (cmd) {
++      case PXA2XX_UDC_CMD_DISCONNECT:
++              printk(KERN_NOTICE "USB cmd disconnect\n");
++//            ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,0);
++              udc_connected_status = 0;
++              break;
++      case PXA2XX_UDC_CMD_CONNECT:
++              printk(KERN_NOTICE "USB cmd connect\n");
++//            ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,1);
++              udc_connected_status = 1;
++              break;
++      }
++}
++
++static int ezx_udc_is_connected(void)
++{
++      return udc_connected_status;
++}
++
++static struct pxa2xx_udc_mach_info ezx_udc_info __initdata = {
++      .udc_is_connected       = ezx_udc_is_connected,
++      .udc_command            = ezx_udc_command,
++};
++
++static struct platform_driver ezx_eoc_driver = {
++      .probe          = ezx_eoc_probe,
++      .remove         = ezx_eoc_remove,
++      .suspend        = ezx_eoc_suspend,
++      .resume         = ezx_eoc_resume,
++      .driver         = {
++              .name   = "ezx-eoc",
++              .owner  = THIS_MODULE,
++      },
++};
++
++int __init ezx_eoc_init(void)
++{
++      return platform_driver_register(&ezx_eoc_driver);
++}
++
++void ezx_eoc_exit(void)
++{
++      return platform_driver_unregister(&ezx_eoc_driver);
++}
++
++MODULE_AUTHOR("Alex Zhang <celeber2@gmail.com>");
++MODULE_DESCRIPTION("EZX EOC I2C driver");
++MODULE_LICENSE("GPL");
++
++module_init(ezx_eoc_init);
++module_exit(ezx_eoc_exit);
+Index: linux-2.6.24/arch/arm/mach-pxa/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/Kconfig
++++ linux-2.6.24/arch/arm/mach-pxa/Kconfig
+@@ -142,6 +142,12 @@
+ config EZX_PCAP
+       bool "PCAP Support"
+ 
++config EZX_EOC
++      tristate "EOC i2c driver of Motorola EZX phones"
++      depends on I2C && EXPERIMENTAL
++      help
++        EOC i2c driver of Motorola EZX phones
++
+ config EZX_EMU
+       bool "Motorola Enchanced Mini Usb"
+       depends on EZX_PCAP
+Index: linux-2.6.24/arch/arm/mach-pxa/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/Makefile
++++ linux-2.6.24/arch/arm/mach-pxa/Makefile
+@@ -39,6 +39,7 @@
+ obj-$(CONFIG_EZX_BP)          += ezx-bp.o
+ obj-$(CONFIG_EZX_PCAP)                += ezx-pcap.o
+ obj-$(CONFIG_EZX_EMU)         += ezx-emu.o
++obj-$(CONFIG_EZX_EOC)         += ezx-eoc.o
+ 
+ # Support for blinky lights
+ led-y := leds.o

diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-mtd-map.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-mtd-map.patch
new file mode 100644 (file)
index 0000000..9ed4906
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/ezx-mtd-map.patch
@@ -0,0 +1,309 @@
+Index: linux-2.6.24/drivers/mtd/maps/Kconfig
+===================================================================
+--- linux-2.6.24.orig/drivers/mtd/maps/Kconfig
++++ linux-2.6.24/drivers/mtd/maps/Kconfig
+@@ -588,6 +588,34 @@
+         Map driver for a NOR flash bank located on the Expansion Bus of the
+         Intel Vermilion Range chipset.
+ 
++config MTD_EZX
++      tristate "Map driver for Motorola EZX Platform"
++      depends on MTD && PXA_EZX
++
++if MTD_EZX
++
++choice
++      prompt "Select partition mapping for EZX platform"
++
++config MTD_EZX_A780
++      bool "A780/E680 Original Mapping"
++
++config MTD_EZX_A780_ALTERNATE
++      bool "A780/E680 Alternate Mapping for BLOB2"
++
++config MTD_EZX_A1200
++      bool "A1200 Original Mapping"
++
++config MTD_EZX_E2
++      bool "E2 Original Mapping"
++
++config MTD_EZX_E6
++      bool "E6 Original Mapping"
++
++endchoice
++
++endif
++
+ config MTD_PLATRAM
+       tristate "Map driver for platform device RAM (mtd-ram)"
+       select MTD_RAM
+Index: linux-2.6.24/drivers/mtd/maps/Makefile
+===================================================================
+--- linux-2.6.24.orig/drivers/mtd/maps/Makefile
++++ linux-2.6.24/drivers/mtd/maps/Makefile
+@@ -69,3 +69,4 @@
+ obj-$(CONFIG_MTD_OMAP_NOR)    += omap_nor.o
+ obj-$(CONFIG_MTD_MTX1)                += mtx-1_flash.o
+ obj-$(CONFIG_MTD_INTEL_VR_NOR)        += intel_vr_nor.o
++obj-$(CONFIG_MTD_EZX)         += ezx-flash.o
+Index: linux-2.6.24/drivers/mtd/maps/ezx-flash.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/mtd/maps/ezx-flash.c
+@@ -0,0 +1,256 @@
++/*
++ * Map driver for the PXA27x
++ *
++ * Author:    Harald Welte
++ * Copyright: (C) 2001 MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/dma-mapping.h>
++#include <linux/slab.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/io.h>
++#include <asm/hardware.h>
++#include <asm/cacheflush.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/mainstone.h>
++
++#define WINDOW_ADDR           0x0
++#define WINDOW_SIZE           (32*1024*1024)
++#define WINDOW_CACHE_ADDR     0x0
++#define WINDOW_CACHE_SIZE     0x1a00000
++
++static void pxa27x_map_inval_cache(struct map_info *map, unsigned long from,
++                                 ssize_t len)
++{
++      flush_ioremap_region(map->phys, map->cached, from, len);
++}
++
++
++struct map_info pxa27x_map = {
++      .name           = "PXA27x flash",
++      .size           = WINDOW_SIZE,
++      .phys           = WINDOW_ADDR,
++      .inval_cache    = &pxa27x_map_inval_cache,
++};
++
++#if defined CONFIG_MTD_EZX_A780_ALTERNATE
++static struct mtd_partition pxa27x_partitions[] = {
++      {
++              .name           = "Bootloader (RO)",
++              .size           = 0x00020000,
++              .offset         = 0,
++              .mask_flags     = MTD_WRITEABLE,
++      }, {
++              .name           = "Bootloader 2",
++              .size           = 0x00020000,
++              .offset         = 0x00020000,
++      } , {
++              .name           = "Moto Kernel",
++              .size           = 0x000e0000, // 896KB
++              .offset         = 0x00040000,
++      } , {
++              .name           = "rootfs",
++              .size           = 0x01760000,
++              .offset         = 0x00120000,
++      } , {
++              .name           = "OpenEZX Kernel",
++              .size           = 0x00180000, // 1.5MB
++              .offset         = 0x01880000,
++      } , {
++              .name           = "ezxlocal",
++              .size           = 0x005a0000,
++              .offset         = 0x01a00000,
++      } , {
++              .name           = "setup",
++              .size           = 0x00020000,
++              .offset         = 0x01fa0000,
++      } , {
++              .name           = "Logo",
++              .size           = 0x00020000,
++              .offset         = 0x01fc0000,
++      },
++};
++#elif defined CONFIG_MTD_EZX_A780
++static struct mtd_partition pxa27x_partitions[] = {
++      {
++              .name           = "Bootloader",
++              .size           = 0x00020000,
++              .offset         = 0,
++              .mask_flags     = MTD_WRITEABLE,
++      }, {
++              .name           = "Kernel",
++              .size           = 0x000e0000,
++              .offset         = 0x00020000,
++      } , {
++              .name           = "rootfs",
++              .size           = 0x018e0000,
++              .offset         = 0x00120000,
++      } , {
++              .name           = "VFM_Filesystem",
++              .size           = 0x00580000,
++              .offset         = 0x01a00000,
++      } , {
++              .name           = "setup",
++              .size           = 0x00020000,
++              .offset         = 0x01fa0000,
++      } , {
++              .name           = "Logo",
++              .size           = 0x00020000,
++              .offset         = 0x01fc0000,
++      },
++};
++#elif defined CONFIG_MTD_EZX_A1200
++static struct mtd_partition pxa27x_partitions[] = {
++      {
++              .name           = "Caddo 2",
++              .size           = 0x00008000,
++              .offset         = 0,
++      }, {
++              .name           = "Itunes",
++              .size           = 0x00008000,
++              .offset         = 0x00008000,
++      }, {
++              .name           = "Caddo 1",
++              .size           = 0x00008000,
++              .offset         = 0x00010000,
++      }, {
++              .name           = "Fota rev",
++              .size           = 0x00008000,
++              .offset         = 0x00018000,
++      }, {
++              .name           = "MBM",
++              .size           = 0x00040000,
++              .offset         = 0x00020000,
++              .mask_flags     = MTD_WRITEABLE,
++      }, {
++              .name           = "Blob",
++              .size           = 0x00020000,
++              .offset         = 0x00080000,
++              .mask_flags     = MTD_WRITEABLE,
++      }, {
++              .name           = "Kernel",
++              .size           = 0x00100000,
++              .offset         = 0x000A0000,
++      } , {
++              .name           = "UserFS DB",
++              .size           = 0x00600000,
++              .offset         = 0x00AA0000,
++      }, {
++              .name           = "UserFS",
++              .size           = 0x007E0000,
++              .offset         = 0x010A0000,
++      }, {
++              .name           = "Test cmd",
++              .size           = 0x00020000,
++              .offset         = 0x018C0000,
++      } , {
++              .name           = "Logo",
++              .size           = 0x00020000,
++              .offset         = 0x018E0000,
++      } , {
++              .name           = "Fota",
++              .size           = 0x000c0000,
++              .offset         = 0x01900000,
++      }, {
++              .name           = "Reserve",
++              .size           = 0x00020000,
++              .offset         = 0x019c0000,
++      }
++};
++#else
++#error "please define partition for this PXA27x implementation"
++#endif
++
++
++static struct mtd_info *mymtd;
++static struct mtd_partition *parsed_parts;
++
++static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
++
++static int __init init_pxa27x(void)
++{
++      struct mtd_partition *parts;
++      int nb_parts = 0;
++      int parsed_nr_parts = 0;
++      char *part_type = "static";
++
++      pxa27x_map.bankwidth = (BOOT_DEF & 1) ? 2 : 4;
++
++      printk("Probing PXA27x flash at physical address 0x%08x (%d-bit bankwidth)\n",
++              WINDOW_ADDR, pxa27x_map.bankwidth * 8);
++      pxa27x_map.virt = ioremap(pxa27x_map.phys, pxa27x_map.size);
++
++      if (!pxa27x_map.virt) {
++              printk("Failed to ioremap\n");
++              return -EIO;
++      }
++
++      mymtd = do_map_probe("cfi_probe", &pxa27x_map);
++      if (!mymtd) {
++              iounmap((void *)pxa27x_map.virt);
++              return -ENXIO;
++      }
++      mymtd->owner = THIS_MODULE;
++
++      simple_map_init(&pxa27x_map);
++
++      if (parsed_nr_parts == 0) {
++              int ret = parse_mtd_partitions(mymtd, probes, &parsed_parts, 0);
++
++              if (ret > 0) {
++                      part_type = "RedBoot";
++                      parsed_nr_parts = ret;
++              }
++      }
++
++      if (parsed_nr_parts > 0) {
++              parts = parsed_parts;
++              nb_parts = parsed_nr_parts;
++      } else {
++              parts = pxa27x_partitions;
++              nb_parts = ARRAY_SIZE(pxa27x_partitions);
++      }
++
++      if (nb_parts) {
++              printk(KERN_NOTICE "Using %s partition definition\n", part_type);
++              add_mtd_partitions(mymtd, parts, nb_parts);
++      } else {
++              add_mtd_device(mymtd);
++      }
++      return 0;
++}
++
++static void __exit cleanup_pxa27x(void)
++{
++      if (mymtd) {
++              del_mtd_partitions(mymtd);
++              map_destroy(mymtd);
++              if (parsed_parts)
++                      kfree(parsed_parts);
++      }
++      if (pxa27x_map.virt)
++              iounmap((void *)pxa27x_map.virt);
++      if (pxa27x_map.cached)
++              iounmap((void *)pxa27x_map.cached);
++      return;
++}
++
++module_init(init_pxa27x);
++module_exit(cleanup_pxa27x);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
++MODULE_DESCRIPTION("MTD map driver for Motorola EZX platform");

diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-pcap.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-pcap.patch
new file mode 100644 (file)
index 0000000..f38a5e5
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/ezx-pcap.patch
@@ -0,0 +1,852 @@
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx-pcap.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/arch/arm/mach-pxa/ezx-pcap.c
+@@ -0,0 +1,513 @@
++/* Driver for Motorola PCAP2 as present in EZX phones
++ *
++ * This is both a SPI device driver for PCAP itself, as well as
++ * an IRQ demultiplexer for handling PCAP generated events such as
++ * headphone jack sense by downstream drivers.
++ *
++ * Copyright (C) 2006 Harald Welte <laforge@openezx.org>
++ * Copyright (C) 2007 Daniel Ribeiro <wyrm@openezx.org>
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/interrupt.h>
++#include <linux/kernel_stat.h>
++#include <linux/proc_fs.h>
++
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++
++#include <asm/arch/ezx.h>
++#include <asm/arch/ssp.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/ezx-pcap.h>
++#include <asm/arch/irqs.h>
++#include <asm/mach/irq.h>
++
++#if 0
++#define DEBUGP(x, args...) printk(x, ## args)
++#else
++#define DEBUGP(x, args...)
++#endif
++
++static DEFINE_SPINLOCK(ezx_ssp_lock);
++static struct ssp_dev ezx_ssp_dev;
++static struct ssp_state ezx_ssp_state;
++static struct pcap_platform_data *pcap_data;
++static int pcap_irq;
++
++static unsigned long ezx_ssp_pcap_putget(ulong data)
++{
++      unsigned long flag;
++      u32 ret = 0;
++
++      spin_lock_irqsave(&ezx_ssp_lock, flag);
++      if (pcap_data->cs >= 0) {
++              if (pcap_data->flags & PCAP_CS_AH)
++                      GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
++              else
++                      GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
++      }
++
++      ssp_write_word(&ezx_ssp_dev,data);
++      ssp_read_word(&ezx_ssp_dev, &ret);
++
++      if (pcap_data->cs >= 0) {
++              if(pcap_data->flags & PCAP_CS_AH)
++                      GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
++              else
++                      GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
++      }
++
++      spin_unlock_irqrestore(&ezx_ssp_lock, flag);
++
++      return ret;
++}
++
++int ezx_pcap_write(u_int8_t reg_num, u_int32_t value)
++{
++      value &= PCAP_REGISTER_VALUE_MASK;
++      value |= PCAP_REGISTER_WRITE_OP_BIT
++              | (reg_num<<PCAP_REGISTER_ADDRESS_SHIFT);
++
++      ezx_ssp_pcap_putget(value);
++
++      DEBUGP("pcap write r%x: 0x%08x\n", reg_num, value);
++      return 0;
++}
++EXPORT_SYMBOL_GPL(ezx_pcap_write);
++
++int ezx_pcap_read(u_int8_t reg_num, u_int32_t *value)
++{
++      u_int32_t frame = PCAP_REGISTER_READ_OP_BIT
++              | (reg_num<<PCAP_REGISTER_ADDRESS_SHIFT);
++
++      *value = ezx_ssp_pcap_putget(frame);
++
++      DEBUGP("pcap read r%x:  0x%08x\n", reg_num, *value);
++      return 0;
++}
++EXPORT_SYMBOL_GPL(ezx_pcap_read);
++
++int ezx_pcap_bit_set(u_int32_t sspPcapBit, u_int8_t to)
++{
++      int ret;
++      u_int32_t tmp;
++      u_int32_t bit = (sspPcapBit & PCAP_REGISTER_VALUE_MASK);
++      u_int8_t reg_num = (sspPcapBit & PCAP_REGISTER_ADDRESS_MASK)
++                                      >> PCAP_REGISTER_ADDRESS_SHIFT;
++
++      ret = ezx_pcap_read(reg_num, &tmp);
++      if (ret < 0)
++              return ret;
++
++      if (to == 0)
++              tmp &= ~bit;
++      else
++              tmp |= bit;
++
++      return ezx_pcap_write(reg_num, tmp);
++}
++EXPORT_SYMBOL_GPL(ezx_pcap_bit_set);
++
++int ezx_pcap_read_bit(u_int32_t bit)
++{
++      int ret;
++      u_int32_t tmp;
++      u_int8_t reg_num = (bit & PCAP_REGISTER_ADDRESS_MASK)
++                                      >> PCAP_REGISTER_ADDRESS_SHIFT;
++
++      ret = ezx_pcap_read(reg_num, &tmp);
++      if (ret < 0)
++              return ret;
++
++      return tmp & (bit & PCAP_REGISTER_VALUE_MASK);
++}
++EXPORT_SYMBOL_GPL(ezx_pcap_read_bit);
++
++/* /proc/pcap support */
++#ifdef CONFIG_PROC_FS
++
++static struct proc_dir_entry *proc_pcap;
++
++char *pcap_registers[] = {
++      "ISR\t", "MSR\t", "PSTAT\t", "INT_SEL\t", "SWCTRL\t", "VREG1\t",
++      "VREG2\t", "VREG\t", "BATT_DAC", "ADC1\t", "ADC2\t", "AUD_CODEC",
++      "RX_AUD_AMPS", "ST_DAC\t", "RTC_TOD\t", "RTC_TODA", "RTC_DAY\t",
++      "RTC_DAYA", "MTRTMR\t", "PWRCTRL\t", "BUSCTRL\t", "PERIPH\t",
++      "AUXVREG_MASK", "VENDOR_REV", "LOWPWR_CTRL", "PERIPH_MASK",
++      "TX_AUD_AMPS", "GP\t",
++      NULL, NULL, NULL, NULL
++};
++
++static int pcap_read_proc(char *page, char **start, off_t off, int count,
++                              int *eof, void *data_unused)
++{
++      int len = 0;
++      u_int8_t r;
++      u_int32_t v;
++      off_t begin = 0;
++
++      for(r = 0; r < 32; r++) {
++              if (pcap_registers[r] == NULL)
++                      continue;
++              ezx_pcap_read(r, &v);
++              len += sprintf(page+len, "%s\t%08X\n", pcap_registers[r], v);
++              if(len + begin > off + count)
++                      goto done;
++              if(len + begin < off) {
++                      begin += len;
++                      len = 0;
++              }
++      }
++      *eof = 1;
++done:
++      if (off >= len+begin)
++              return 0;
++      *start = page + (off-begin);
++      return ((count < begin+len-off) ? count : begin+len-off);
++}
++#endif
++
++void ezx_pcap_vibrator_level(u_int32_t value)
++{
++      u_int32_t tmp;
++
++      ezx_pcap_read(PCAP_REG_AUXVREG, &tmp);
++
++      tmp &= ~PCAP_AUXVREG_V_VIB_MASK;
++      tmp |= ((value << PCAP_AUXVREG_V_VIB_SHIFT) & PCAP_AUXVREG_V_VIB_MASK);
++
++      ezx_pcap_write(PCAP_REG_AUXVREG, tmp);
++}
++EXPORT_SYMBOL_GPL(ezx_pcap_vibrator_level);
++
++/* MMC/SD specific functions */
++
++void ezx_pcap_mmcsd_voltage(u_int32_t bits)
++{
++      unsigned int tmp;
++      ezx_pcap_read(PCAP_REG_AUXVREG, &tmp);
++      if (pcap_data->flags & PCAP_MCI_SD) {
++              tmp &= ~PCAP_AUXVREG_VAUX2_MASK;
++              tmp |= ((bits << PCAP_AUXVREG_VAUX2_SHIFT) &
++                                      PCAP_AUXVREG_VAUX2_MASK);
++      }
++      else if (pcap_data->flags & PCAP_MCI_TF) {
++              tmp &= ~PCAP_AUXVREG_VAUX3_MASK;
++              tmp |= ((bits << PCAP_AUXVREG_VAUX3_SHIFT) &
++                                      PCAP_AUXVREG_VAUX3_MASK);
++      }
++      ezx_pcap_write(PCAP_REG_AUXVREG, tmp);
++}
++EXPORT_SYMBOL_GPL(ezx_pcap_mmcsd_voltage);
++
++int ezx_pcap_mmcsd_power(int on)
++{
++      if (on > 0) on = 1;
++      else on = 0;
++
++      if (pcap_data->flags & PCAP_MCI_SD)
++              return ezx_pcap_bit_set(PCAP_BIT_AUXVREG_VAUX2_EN, on);
++      else if (pcap_data->flags & PCAP_MCI_TF)
++              return ezx_pcap_bit_set(PCAP_BIT_AUXVREG_VAUX3_EN, on);
++      else
++              return -ENODEV;
++}
++EXPORT_SYMBOL_GPL(ezx_pcap_mmcsd_power);
++
++/* IRQ Handling */
++
++/* Array indexed by BIT POSITION of PCAP register, returns IRQ number */
++static unsigned int pcap2irq[] = {
++      [0]     = EZX_IRQ_ADCDONE,
++      [1]     = EZX_IRQ_TS,
++      [2]     = EZX_IRQ_1HZ, /* 1HZ */
++      [3]     = EZX_IRQ_WH, /* WH */
++      [4]     = EZX_IRQ_WL, /* WL */
++      [5]     = EZX_IRQ_TODA, /* TODA */
++      [6]     = EZX_IRQ_USB4V,
++      [7]     = EZX_IRQ_ONOFF, /* ONOFF */
++      [8]     = EZX_IRQ_ONOFF2, /* ONOFF2 */
++      [9]     = EZX_IRQ_USB1V,
++      [10]    = EZX_IRQ_MOBPORT, /* MOBPORT */
++      [11]    = EZX_IRQ_MIC,
++      [12]    = EZX_IRQ_HEADJACK,
++      [13]    = EZX_IRQ_ST, /* ST */
++      [14]    = EZX_IRQ_PC, /* PC */
++      [15]    = EZX_IRQ_WARM, /* WARM */
++      [16]    = EZX_IRQ_EOL, /* EOL */
++      [17]    = EZX_IRQ_CLK, /* CLK */
++      [18]    = EZX_IRQ_SYSRST, /* SYSRST */
++      [19]    = 0,
++      [20]    = EZX_IRQ_ADCDONE2,
++      [21]    = EZX_IRQ_SOFTRESET, /* SOFTRESET */
++      [22]    = EZX_IRQ_MNEXB, /* MNEXB */
++};
++
++/* Array indexed by IRQ NUMBER, returns PCAP absolute value */
++static unsigned int irq2pcap[] = {
++      [EZX_IRQ_MNEXB]         = PCAP_IRQ_MNEXB,
++      [EZX_IRQ_SOFTRESET]     = PCAP_IRQ_SOFTRESET,
++      [EZX_IRQ_SYSRST]        = PCAP_IRQ_SYSRST,
++      [EZX_IRQ_CLK]           = PCAP_IRQ_CLK,
++      [EZX_IRQ_EOL]           = PCAP_IRQ_EOL,
++      [EZX_IRQ_WARM]          = PCAP_IRQ_WARM,
++      [EZX_IRQ_PC]            = PCAP_IRQ_PC,
++      [EZX_IRQ_ST]            = PCAP_IRQ_ST,
++      [EZX_IRQ_MOBPORT]       = PCAP_IRQ_MOBPORT,
++      [EZX_IRQ_ONOFF2]        = PCAP_IRQ_ONOFF2,
++      [EZX_IRQ_ONOFF]         = PCAP_IRQ_ONOFF,
++      [EZX_IRQ_TODA]          = PCAP_IRQ_TODA,
++      [EZX_IRQ_WL]            = PCAP_IRQ_WL,
++      [EZX_IRQ_WH]            = PCAP_IRQ_WH,
++      [EZX_IRQ_1HZ]           = PCAP_IRQ_1HZ,
++      [EZX_IRQ_USB4V]         = PCAP_IRQ_USB4V,
++      [EZX_IRQ_USB1V]         = PCAP_IRQ_USB1V,
++      [EZX_IRQ_HEADJACK]      = PCAP_IRQ_A1,
++      [EZX_IRQ_MIC]           = PCAP_IRQ_MB2,
++      [EZX_IRQ_TS]            = PCAP_IRQ_TS,
++      [EZX_IRQ_ADCDONE]       = PCAP_IRQ_ADCDONE,
++      [EZX_IRQ_ADCDONE2]      = PCAP_IRQ_ADCDONE2,
++};
++
++static void pcap_ack_irq(unsigned int irq)
++{
++      DEBUGP("pcap_ack_irq: %u\n", irq);
++      ezx_pcap_write(PCAP_REG_ISR, irq2pcap[irq]);
++}
++
++static void pcap_mask_irq(unsigned int irq)
++{
++      u_int32_t reg;
++      unsigned long flag;
++
++      spin_lock_irqsave(&ezx_ssp_lock, flag);
++      DEBUGP("pcap_mask_irq: %u\n", irq);
++      ezx_pcap_read(PCAP_REG_MSR, &reg);
++      reg |= irq2pcap[irq];
++      ezx_pcap_write(PCAP_REG_MSR, reg);
++      spin_unlock_irqrestore(&ezx_ssp_lock, flag);
++}
++
++static void pcap_unmask_irq(unsigned int irq)
++{
++      u_int32_t tmp;
++      unsigned long flag;
++
++      spin_lock_irqsave(&ezx_ssp_lock, flag);
++      DEBUGP("pcap_unmask_irq: %u\n", irq);
++      ezx_pcap_read(PCAP_REG_MSR, &tmp);
++      tmp &= ~irq2pcap[irq];
++      ezx_pcap_write(PCAP_REG_MSR, tmp);
++      spin_unlock_irqrestore(&ezx_ssp_lock, flag);
++}
++
++static struct irq_chip pcap_chip = {
++      .ack    = pcap_ack_irq,
++      .mask   = pcap_mask_irq,
++      .unmask = pcap_unmask_irq,
++};
++
++/* handler for interrupt received from PCAP via GPIO */
++static void pcap_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
++{
++      const unsigned int cpu = smp_processor_id();
++      int i;
++      u_int32_t isr, msr;
++
++      spin_lock(&desc->lock);
++      desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
++      if (unlikely(desc->status & (IRQ_INPROGRESS | IRQ_DISABLED))) {
++              desc->status |= (IRQ_PENDING | IRQ_MASKED);
++              desc->chip->mask(irq);
++              desc->chip->ack(irq);
++              goto out_unlock;
++      }
++      kstat_cpu(cpu).irqs[irq]++;
++      desc->chip->ack(irq);
++      desc->status |= IRQ_INPROGRESS;
++      do {
++              if (unlikely((desc->status &
++                              (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
++                            (IRQ_PENDING | IRQ_MASKED))) {
++                      desc->chip->unmask(irq);
++                      desc->status &= ~IRQ_MASKED;
++              }
++              desc->status &= ~IRQ_PENDING;
++
++              ezx_pcap_read(PCAP_REG_ISR, &isr);
++              ezx_pcap_read(PCAP_REG_MSR, &msr);
++              for (i = ARRAY_SIZE(pcap2irq)-1; i >= 0; i--) {
++                      unsigned int pirq = pcap2irq[i];
++                      struct irq_desc *subdesc;
++                      if (pirq == 0 || !(isr & irq2pcap[pirq]))
++                              continue;
++                      subdesc = irq_desc + pirq;
++                      if (msr & irq2pcap[pirq])
++                              continue;
++                      DEBUGP("found irq %u\n", pirq);
++                      spin_unlock(&desc->lock);
++                      desc_handle_irq(pirq, subdesc);
++                      spin_lock(&desc->lock);
++              }
++
++      } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
++
++      desc->status &= ~IRQ_INPROGRESS;
++out_unlock:
++      spin_unlock(&desc->lock);
++}
++
++static int ezx_pcap_remove(struct platform_device *pdev)
++{
++      int irq;
++      DEBUGP("exz_pcap_remove entered\n");
++
++      set_irq_chained_handler(pcap_irq, NULL);
++
++      for (irq = EZX_IRQ(0); irq <= EZX_IRQ(21); irq++) {
++              set_irq_chip(irq, NULL);
++              set_irq_handler(irq, NULL);
++              set_irq_flags(irq, 0);
++      }
++
++      ssp_exit(&ezx_ssp_dev);
++
++      return 0;
++}
++
++static int __init ezx_pcap_probe(struct platform_device *pdev)
++{
++      unsigned int ret, irq;
++      DEBUGP("ezx_pcap_probe entered\n");
++
++      pcap_data = pdev->dev.platform_data;
++
++      /* configure ssp port */
++      pxa_gpio_mode(29|GPIO_ALT_FN_3_OUT);
++      pxa_gpio_mode(GPIO24_SFRM_MD);
++      pxa_gpio_mode(GPIO25_STXD_MD);
++      pxa_gpio_mode(GPIO26_SRXD_MD);
++
++      if (pcap_data->cs >= 0) {
++              if (pcap_data->flags & PCAP_CS_AH)
++                      pxa_gpio_mode(pcap_data->cs | GPIO_OUT);
++              else
++                      pxa_gpio_mode(pcap_data->cs | GPIO_OUT
++                                              | GPIO_DFLT_HIGH);
++      }
++      pcap_irq = platform_get_irq(pdev, 0);
++      if(pcap_irq < 0) {
++              printk(KERN_ERR "Unable to get IRQ for pcap!\n");
++              return pcap_irq;
++      }
++
++      ret = ssp_init(&ezx_ssp_dev, pcap_data->port, 0);
++      if (ret) {
++              printk(KERN_ERR "Unable to register SSP handler!\n");
++              return ret;
++      }
++
++      ssp_disable(&ezx_ssp_dev);
++      ssp_config(&ezx_ssp_dev,
++              (SSCR0_Motorola | SSCR0_DataSize(16) | SSCR0_EDSS),
++              (SSCR1_TxTresh(1) | SSCR1_RxTresh(1)),
++              0, SSCR0_SerClkDiv(pcap_data->clk));
++      ssp_enable(&ezx_ssp_dev);
++
++      /* mask/ack all PCAP interrupts */
++      ezx_pcap_write(PCAP_REG_MSR, PCAP_MASK_ALL_INTERRUPT);
++      ezx_pcap_write(PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER);
++
++      if (pcap_data->init)
++              pcap_data->init();
++
++      /* set up interrupt demultiplexing code for PCAP2 irqs */
++      set_irq_type(pcap_irq, IRQT_RISING);
++      for (irq = EZX_IRQ(0); irq <= EZX_IRQ(21); irq++) {
++              set_irq_chip(irq, &pcap_chip);
++              set_irq_handler(irq, handle_level_irq);
++              set_irq_flags(irq, IRQF_VALID);
++      }
++      set_irq_chained_handler(pcap_irq, pcap_irq_demux_handler);
++      set_irq_wake(pcap_irq, 1);
++
++      printk("ezx-pcap: ssp driver registered\n");
++      return ret;
++}
++
++static int ezx_pcap_suspend(struct platform_device *dev, pm_message_t state)
++{
++      DEBUGP("pcap suspend!\n");
++      ssp_flush(&ezx_ssp_dev);
++      ssp_save_state(&ezx_ssp_dev, &ezx_ssp_state);
++      if (pcap_data->cs >= 0)
++                      pxa_gpio_mode(pcap_data->cs | GPIO_IN);
++      return 0;
++}
++
++static int ezx_pcap_resume(struct platform_device *dev)
++{
++      DEBUGP("pcap resume!\n");
++
++      if (pcap_data->cs >= 0) {
++              if (pcap_data->flags & PCAP_CS_AH) {
++                      pxa_gpio_mode(pcap_data->cs | GPIO_OUT);
++                      GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
++              }
++              else {
++                      pxa_gpio_mode(pcap_data->cs | GPIO_OUT | GPIO_DFLT_HIGH);
++                      GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs);
++              }
++      }
++      ssp_restore_state(&ezx_ssp_dev,&ezx_ssp_state);
++      ssp_enable(&ezx_ssp_dev);
++
++      ezx_pcap_write(PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER);
++
++      return 0;
++}
++
++static struct platform_driver ezxpcap_driver = {
++      .probe          = ezx_pcap_probe,
++      .remove         = ezx_pcap_remove,
++      .suspend        = ezx_pcap_suspend,
++      .resume         = ezx_pcap_resume,
++      .driver         = {
++              .name   = "ezx-pcap",
++              .owner  = THIS_MODULE,
++      },
++};
++
++static int __init ezx_pcap_init(void)
++{
++      DEBUGP("ezx_pcap_init entered\n");
++
++#ifdef CONFIG_PROC_FS
++      if((proc_pcap = create_proc_entry("pcap", 0, NULL)))
++              proc_pcap->read_proc = pcap_read_proc;
++#endif
++
++      return platform_driver_register(&ezxpcap_driver);
++}
++
++static void __exit ezx_pcap_exit(void)
++{
++#ifdef CONFIG_PROC_FS
++      if (proc_pcap)
++              remove_proc_entry("pcap", NULL);
++#endif
++
++      return platform_driver_unregister(&ezxpcap_driver);
++}
++
++module_init(ezx_pcap_init);
++module_exit(ezx_pcap_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Harald Welte");
++MODULE_DESCRIPTION("SPI Driver for Motorola PCAP2");
++
+Index: linux-2.6.24/include/asm-arm/arch-pxa/ezx-pcap.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24/include/asm-arm/arch-pxa/ezx-pcap.h
+@@ -0,0 +1,248 @@
++/*
++ * Copyright 2007 Daniel Ribeiro <wyrm@openezx.org>
++ */
++
++#ifndef EZX_PCAP_H
++#define EZX_PCAP_H
++
++struct pcap_platform_data {
++      int port;               /* SSP port */
++      int cs;                 /* CS gpio */
++      int clk;
++      int flags;              /* driver flags */
++      int (*init)(void);      /* board specific driver init */
++};
++
++/* driver configuration */
++#define PCAP_CS_AH            (1 << 0) /* CS pin is active high */
++#define PCAP_MCI_SD           (1 << 1) /* SD card slot */
++#define PCAP_MCI_TF           (1 << 2) /* TF card slot */
++
++#define PCAP_REGISTER_WRITE_OP_BIT    0x80000000
++#define PCAP_REGISTER_READ_OP_BIT     0x00000000
++
++#define PCAP_REGISTER_VALUE_MASK      0x01ffffff
++#define PCAP_REGISTER_ADDRESS_MASK    0x7c000000
++#define PCAP_REGISTER_ADDRESS_SHIFT   26
++#define PCAP_REGISTER_NUMBER          32
++#define PCAP_CLEAR_INTERRUPT_REGISTER 0x01ffffff
++#define PCAP_MASK_ALL_INTERRUPT               0x01ffffff
++
++
++#define pbit(reg, bit)        ((reg << PCAP_REGISTER_ADDRESS_SHIFT) | bit)
++
++/* registers acessible by both pcap ports */
++#define PCAP_REG_ISR          0x0     /* Interrupt Status */
++#define PCAP_REG_MSR          0x1     /* Interrupt Mask */
++#define PCAP_REG_PSTAT                0x2     /* Processor Status */
++#define PCAP_REG_VREG2                0x6     /* Regulator Bank 2 Control */
++#define PCAP_REG_AUXVREG      0x7     /* Auxiliary Regulator Control */
++#define PCAP_REG_BATT         0x8     /* Battery Control */
++#define PCAP_REG_ADC1         0x9     /* AD Control */
++#define PCAP_REG_ADC2         0xa     /* AD Result */
++#define PCAP_REG_CODEC                0xb     /* Audio Codec Control */
++#define PCAP_REG_RX_AMPS      0xc     /* RX Audio Amplifiers Control */
++#define PCAP_REG_ST_DAC               0xd     /* Stereo DAC Control */
++#define PCAP_REG_BUSCTRL      0x14    /* Connectivity Control */
++#define PCAP_REG_PERIPH               0x15    /* Peripheral Control */
++#define PCAP_REG_LOWPWR               0x18    /* Regulator Low Power Control */
++#define PCAP_REG_TX_AMPS      0x1a    /* TX Audio Amplifiers Control */
++#define PCAP_REG_GP           0x1b    /* General Purpose */
++
++/* registers acessible by pcap port 1 only (a1200, e2 & e6) */
++#define PCAP_REG_INT_SEL      0x3     /* Interrupt Select */
++#define PCAP_REG_SWCTRL               0x4     /* Switching Regulator Control */
++#define PCAP_REG_VREG1                0x5     /* Regulator Bank 1 Control */
++#define PCAP_REG_RTC_TOD      0xe     /* RTC Time of Day */
++#define PCAP_REG_RTC_TODA     0xf     /* RTC Time of Day Alarm */
++#define PCAP_REG_RTC_DAY      0x10    /* RTC Day */
++#define PCAP_REG_RTC_DAYA     0x11    /* RTC Day Alarm */
++#define PCAP_REG_MTRTMR               0x12    /* AD Monitor Timer */
++#define PCAP_REG_PWR          0x13    /* Power Control */
++#define PCAP_REG_AUXVREG_MASK 0x16    /* Auxiliary Regulator Mask */
++#define PCAP_REG_VENDOR_REV   0x17
++#define PCAP_REG_PERIPH_MASK  0x19    /* Peripheral Mask */
++
++/* interrupts - registers 0, 1, 2, 3 */
++#define PCAP_IRQ_ADCDONE      (1 << 0)        /* AD Conversion Done Port 1 */
++#define PCAP_IRQ_TS           (1 << 1)        /* Touch Screen */
++#define PCAP_IRQ_1HZ          (1 << 2)        /* 1HZ Timer */
++#define PCAP_IRQ_WH           (1 << 3)
++#define PCAP_IRQ_WL           (1 << 4)
++#define PCAP_IRQ_TODA         (1 << 5)
++#define PCAP_IRQ_USB4V                (1 << 6)
++#define PCAP_IRQ_ONOFF                (1 << 7)
++#define PCAP_IRQ_ONOFF2               (1 << 8)
++#define PCAP_IRQ_USB1V                (1 << 9)
++#define PCAP_IRQ_MOBPORT      (1 << 10)
++#define PCAP_IRQ_MB2          (1 << 11)       /* Mic */
++#define PCAP_IRQ_A1           (1 << 12)       /* Audio jack */
++#define PCAP_IRQ_ST           (1 << 13)
++#define PCAP_IRQ_PC           (1 << 14)
++#define PCAP_IRQ_WARM         (1 << 15)
++#define PCAP_IRQ_EOL          (1 << 16)
++#define PCAP_IRQ_CLK          (1 << 17)
++#define PCAP_IRQ_SYSRST               (1 << 18)
++#define PCAP_IRQ_ADCDONE2     (1 << 20)       /* AD Conversion Done Port 2 */
++#define PCAP_IRQ_SOFTRESET    (1 << 21)
++#define PCAP_IRQ_MNEXB                (1 << 22)
++
++#define PCAP_BIT_VREG2_V1_STBY                        pbit(PCAP_REG_VREG2, (1 << 0))
++#define PCAP_BIT_VREG2_V2_STBY                        pbit(PCAP_REG_VREG2, (1 << 1))
++#define PCAP_BIT_VREG2_V3_STBY                        pbit(PCAP_REG_VREG2, (1 << 2))
++#define PCAP_BIT_VREG2_V4_STBY                        pbit(PCAP_REG_VREG2, (1 << 3))
++#define PCAP_BIT_VREG2_V5_STBY                        pbit(PCAP_REG_VREG2, (1 << 4))
++#define PCAP_BIT_VREG2_V6_STBY                        pbit(PCAP_REG_VREG2, (1 << 5))
++#define PCAP_BIT_VREG2_V7_STBY                        pbit(PCAP_REG_VREG2, (1 << 6))
++#define PCAP_BIT_VREG2_V8_STBY                        pbit(PCAP_REG_VREG2, (1 << 7))
++#define PCAP_BIT_VREG2_V9_STBY                        pbit(PCAP_REG_VREG2, (1 << 8))
++#define PCAP_BIT_VREG2_V10_STBY                       pbit(PCAP_REG_VREG2, (1 << 9))
++#define PCAP_BIT_VREG2_V1_LOWPWR              pbit(PCAP_REG_VREG2, (1 << 10))
++#define PCAP_BIT_VREG2_V2_LOWPWR              pbit(PCAP_REG_VREG2, (1 << 11))
++#define PCAP_BIT_VREG2_V3_LOWPWR              pbit(PCAP_REG_VREG2, (1 << 12))
++#define PCAP_BIT_VREG2_V4_LOWPWR              pbit(PCAP_REG_VREG2, (1 << 13))
++#define PCAP_BIT_VREG2_V5_LOWPWR              pbit(PCAP_REG_VREG2, (1 << 14))
++#define PCAP_BIT_VREG2_V6_LOWPWR              pbit(PCAP_REG_VREG2, (1 << 15))
++#define PCAP_BIT_VREG2_V7_LOWPWR              pbit(PCAP_REG_VREG2, (1 << 16))
++#define PCAP_BIT_VREG2_V8_LOWPWR              pbit(PCAP_REG_VREG2, (1 << 17))
++#define PCAP_BIT_VREG2_V9_LOWPWR              pbit(PCAP_REG_VREG2, (1 << 18))
++#define PCAP_BIT_VREG2_V10_LOWPWR             pbit(PCAP_REG_VREG2, (1 << 19))
++
++#define PCAP_BIT_AUXVREG_VAUX1_EN             pbit(PCAP_REG_AUXVREG, (1 << 1))
++#define PCAP_AUXVREG_VAUX1_MASK                       0x0000000c
++#define PCAP_AUXVREG_VAUX1_SHIFT              2
++#define PCAP_BIT_AUXVREG_VAUX2_EN             pbit(PCAP_REG_AUXVREG, (1 << 4))
++#define PCAP_AUXVREG_VAUX2_MASK                       0x00000060
++#define PCAP_AUXVREG_VAUX2_SHIFT              5
++#define PCAP_BIT_AUXVREG_VAUX3_EN             pbit(PCAP_REG_AUXVREG, (1 << 7))
++#define PCAP_AUXVREG_VAUX3_MASK                       0x00000f00
++#define PCAP_AUXVREG_VAUX3_SHIFT              8
++#define PCAP_BIT_AUXVREG_VAUX4_EN             pbit(PCAP_REG_AUXVREG, (1 << 12))
++#define PCAP_AUXVREG_VAUX4_MASK                       0x00006000
++#define PCAP_AUXVREG_VAUX4_SHIFT              13
++#define PCAP_BIT_AUXVREG_VSIM2_EN             pbit(PCAP_REG_AUXVREG, (1 << 16))
++#define PCAP_BIT_AUXVREG_VSIM_EN              pbit(PCAP_REG_AUXVREG, (1 << 17))
++#define PCAP_BIT_AUXVREG_VSIM_0                       pbit(PCAP_REG_AUXVREG, (1 << 18))
++#define PCAP_BIT_AUXVREG_V_VIB_EN             pbit(PCAP_REG_AUXVREG, (1 << 19))
++#define PCAP_AUXVREG_V_VIB_MASK                       0x00300000
++#define PCAP_AUXVREG_V_VIB_SHIFT              20
++#define PCAP_BIT_AUXVREG_VAUX1_STBY           pbit(PCAP_REG_AUXVREG, (1 << 22))
++#define PCAP_BIT_AUXVREG_VAUX1_LOWPWR         pbit(PCAP_REG_AUXVREG, (1 << 23))
++#define PCAP_BIT_AUXVREG_SW3_STBY             pbit(PCAP_REG_AUXVREG, (1 << 24))
++
++#define PCAP_BATT_DAC_MASK                    0x000000ff
++#define PCAP_BATT_DAC_SHIFT                   0
++#define PCAP_BIT_BATT_B_FDBK                  pbit(PCAP_REG_BATT, (1 << 8))
++#define PCAP_BIT_BATT_EXT_ISENSE              pbit(PCAP_REG_BATT, (1 << 9))
++#define PCAP_BATT_V_COIN_MASK                 0x00003c00
++#define PCAP_BATT_V_COIN_SHIFT                        10
++#define PCAP_BIT_BATT_I_COIN                  pbit(PCAP_REG_BATT, (1 << 14))
++#define PCAP_BIT_BATT_COIN_CH_EN              pbit(PCAP_REG_BATT, (1 << 15))
++#define PCAP_BATT_EOL_SEL_MASK                        0x000e0000
++#define PCAP_BATT_EOL_SEL_SHIFT                       17
++#define PCAP_BIT_BATT_EOL_CMP_EN              pbit(PCAP_REG_BATT, (1 << 20))
++#define PCAP_BIT_BATT_BATT_DET_EN             pbit(PCAP_REG_BATT, (1 << 21))
++#define PCAP_BIT_BATT_THERMBIAS_CTRL          pbit(PCAP_REG_BATT, (1 << 22))
++
++#define PCAP_BIT_ADC1_ADEN                    pbit(PCAP_REG_ADC1, (1 << 0))
++#define PCAP_BIT_ADC1_RAND                    pbit(PCAP_REG_ADC1, (1 << 1))
++#define PCAP_BIT_ADC1_AD_SEL1                 pbit(PCAP_REG_ADC1, (1 << 2))
++#define PCAP_BIT_ADC1_AD_SEL2                 pbit(PCAP_REG_ADC1, (1 << 3))
++#define PCAP_ADC1_ADA1_MASK                   0x00000070
++#define PCAP_ADC1_ADA1_SHIFT                  4
++#define PCAP_ADC1_ADA2_MASK                   0x00000380
++#define PCAP_ADC1_ADA2_SHIFT                  7
++#define PCAP_ADC1_ATO_MASK                    0x00003c00
++#define PCAP_ADC1_ATO_SHIFT                   10
++#define PCAP_BIT_ADC1_ATOX                    pbit(PCAP_REG_ADC1, (1 << 14))
++#define PCAP_BIT_ADC1_MTR1                    pbit(PCAP_REG_ADC1, (1 << 15))
++#define PCAP_BIT_ADC1_MTR2                    pbit(PCAP_REG_ADC1, (1 << 16))
++#define PCAP_ADC1_TS_M_MASK                   0x000e0000
++#define PCAP_ADC1_TS_M_SHIFT                  17
++#define PCAP_BIT_ADC1_TS_REF_LOWPWR           pbit(PCAP_REG_ADC1, (1 << 20))
++#define PCAP_BIT_ADC1_TS_REFENB                       pbit(PCAP_REG_ADC1, (1 << 21))
++#define PCAP_BIT_ADC1_BATT_I_POLARITY         pbit(PCAP_REG_ADC1, (1 << 22))
++#define PCAP_BIT_ADC1_BATT_I_ADC              pbit(PCAP_REG_ADC1, (1 << 23))
++
++#define PCAP_ADC2_ADD1_MASK                   0x000003ff
++#define PCAP_ADC2_ADD1_SHIFT                  0
++#define PCAP_ADC2_ADD2_MASK                   0x000ffc00
++#define PCAP_ADC2_ADD2_SHIFT                  10
++#define PCAP_BIT_ADC2_ADINC1                  pbit(PCAP_REG_ADC2, (1 << 20))
++#define PCAP_BIT_ADC2_ADINC2                  pbit(PCAP_REG_ADC2, (1 << 21))
++#define PCAP_BIT_ADC2_ASC                     pbit(PCAP_REG_ADC2, (1 << 22))
++
++#define PCAP_BIT_BUSCTRL_FSENB                        0x50000001
++#define PCAP_BIT_BUSCTRL_USB_SUSPEND          0x50000002
++#define PCAP_BIT_BUSCTRL_USB_PU                       0x50000004
++#define PCAP_BIT_BUSCTRL_USB_PD                       0x50000008
++#define PCAP_BIT_BUSCTRL_VUSB_EN              0x50000010
++#define PCAP_BIT_BUSCTRL_USB_PS                       0x50000020
++#define PCAP_BIT_BUSCTRL_VUSB_MSTR_EN         0x50000040
++#define PCAP_BIT_BUSCTRL_VBUS_PD_ENB          0x50000080
++#define PCAP_BIT_BUSCTRL_CURRLIM              0x50000100
++#define PCAP_BIT_BUSCTRL_RS232ENB             0x50000200
++#define PCAP_BIT_BUSCTRL_RS232_DIR            0x50000400
++#define PCAP_BIT_BUSCTRL_SE0_CONN             0x50000800
++#define PCAP_BIT_BUSCTRL_USB_PDM              0x50001000
++#define PCAP_BIT_BUSCTRL_BUS_PRI_ADJ          0x51000000
++
++#define PCAP_BIT_PERIPH_BL_CTRL0              0x54000001
++#define PCAP_BIT_PERIPH_BL_CTRL1              0x54000002
++#define PCAP_BIT_PERIPH_BL_CTRL2              0x54000004
++#define PCAP_BIT_PERIPH_BL_CTRL3              0x54000008
++#define PCAP_BIT_PERIPH_BL_CTRL4              0x54000010
++#define PCAP_BIT_PERIPH_LEDR_EN                       0x54000020
++#define PCAP_BIT_PERIPH_LEDG_EN                       0x54000040
++#define PCAP_BIT_PERIPH_LEDR_CTRL0            0x54000080
++#define PCAP_BIT_PERIPH_LEDR_CTRL1            0x54000100
++#define PCAP_BIT_PERIPH_LEDR_CTRL2            0x54000200
++#define PCAP_BIT_PERIPH_LEDR_CTRL3            0x54000400
++#define PCAP_BIT_PERIPH_LEDG_CTRL0            0x54000800
++#define PCAP_BIT_PERIPH_LEDG_CTRL1            0x54001000
++#define PCAP_BIT_PERIPH_LEDG_CTRL2            0x54002000
++#define PCAP_BIT_PERIPH_LEDG_CTRL3            0x54004000
++#define PCAP_BIT_PERIPH_LEDR_I0                       0x54008000
++#define PCAP_BIT_PERIPH_LEDR_I1                       0x54010000
++#define PCAP_BIT_PERIPH_LEDG_I0                       0x54020000
++#define PCAP_BIT_PERIPH_LEDG_I1                       0x54040000
++#define PCAP_BIT_PERIPH_SKIP                  0x54080000
++#define PCAP_BIT_PERIPH_BL2_CTRL0             0x54100000
++#define PCAP_BIT_PERIPH_BL2_CTRL1             0x54200000
++#define PCAP_BIT_PERIPH_BL2_CTRL2             0x54400000
++#define PCAP_BIT_PERIPH_BL2_CTRL3             0x54800000
++#define PCAP_BIT_PERIPH_BL2_CTRL4             0x55000000
++
++#define PCAP_BIT_LOWPWR_VAUX2_STBY            0x60000001
++#define PCAP_BIT_LOWPWR_VAUX2_LOWPWR          0x60000002
++#define PCAP_BIT_LOWPWR_VAUX3_STBY            0x60000004
++#define PCAP_BIT_LOWPWR_VAUX3_LOWPWR          0x60000008
++#define PCAP_BIT_LOWPWR_VAUX4_STBY            0x60000010
++#define PCAP_BIT_LOWPWR_VAUX4_LOWPWR          0x60000020
++#define PCAP_BIT_LOWPWR_VSIM_LOWPWR           0x60000040
++#define PCAP_BIT_LOWPWR_VSIM2_LOWPWR          0x60000080
++#define PCAP_BIT_LOWPWR_SW1_MODE00            0x60000100
++#define PCAP_BIT_LOWPWR_SW1_MODE01            0x60000200
++#define PCAP_BIT_LOWPWR_SW1_MODE10            0x60000400
++#define PCAP_BIT_LOWPWR_SW1_MODE11            0x60000800
++#define PCAP_BIT_LOWPWR_SW10_DVS              0x60001000
++#define PCAP_BIT_LOWPWR_SW11_DVS              0x60002000
++#define PCAP_BIT_LOWPWR_SW12_DVS              0x60004000
++#define PCAP_BIT_LOWPWR_SW13_DVS              0x60008000
++#define PCAP_BIT_LOWPWR_SW2_MODE00            0x60010000
++#define PCAP_BIT_LOWPWR_SW2_MODE01            0x60020000
++#define PCAP_BIT_LOWPWR_SW2_MODE10            0x60040000
++#define PCAP_BIT_LOWPWR_SW2_MODE11            0x60080000
++#define PCAP_BIT_LOWPWR_SW20_DVS              0x60100000
++#define PCAP_BIT_LOWPWR_SW21_DVS              0x60200000
++#define PCAP_BIT_LOWPWR_SW22_DVS              0x60400000
++#define PCAP_BIT_LOWPWR_SW23_DVS              0x60800000
++#define PCAP_BIT_LOWPWR_VC_STBY                       0x61000000
++
++extern int ezx_pcap_write(u_int8_t, u_int32_t);
++extern int ezx_pcap_read(u_int8_t, u_int32_t *);
++extern int ezx_pcap_bit_set(u_int32_t, u_int8_t);
++extern int ezx_pcap_bit_get(u_int32_t);
++extern int ezx_pcap_read_bit(u_int32_t);
++extern void ezx_pcap_vibrator_level(u_int32_t);
++#endif
+Index: linux-2.6.24/include/asm-arm/arch-pxa/irqs.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-pxa/irqs.h
++++ linux-2.6.24/include/asm-arm/arch-pxa/irqs.h
+@@ -89,7 +89,7 @@
+  * within sensible limits.
+  */
+ #define IRQ_BOARD_START               (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+-#define IRQ_BOARD_END         (IRQ_BOARD_START + 16)
++#define IRQ_BOARD_END         (IRQ_BOARD_START + 22)
+ 
+ #define IRQ_SA1111_START      (IRQ_BOARD_END)
+ #define IRQ_GPAIN0            (IRQ_BOARD_END + 0)
+@@ -180,7 +180,8 @@
+ #define NR_IRQS                       (IRQ_LOCOMO_SPI_TEND + 1)
+ #elif defined(CONFIG_ARCH_LUBBOCK) || \
+       defined(CONFIG_MACH_LOGICPD_PXA270) || \
+-      defined(CONFIG_MACH_MAINSTONE)
++      defined(CONFIG_MACH_MAINSTONE) || \
++      defined(CONFIG_PXA_EZX)
+ #define NR_IRQS                       (IRQ_BOARD_END)
+ #else
+ #define NR_IRQS                       (IRQ_BOARD_START)
+@@ -227,6 +228,31 @@
+ #define IRQ_LOCOMO_LT_BASE    (IRQ_BOARD_START + 2)
+ #define IRQ_LOCOMO_SPI_BASE   (IRQ_BOARD_START + 3)
+ 
++/* EZX Interrupts (CONFIG_EZX) */
++#define EZX_IRQ(x)            (IRQ_BOARD_START + (x))
++#define EZX_IRQ_USB4V         EZX_IRQ(0) /* EMU */
++#define EZX_IRQ_USB1V         EZX_IRQ(1) /* EMU */
++#define EZX_IRQ_HEADJACK      EZX_IRQ(2) /* Audio connector */
++#define EZX_IRQ_MIC           EZX_IRQ(3) /* Audio connector */
++#define EZX_IRQ_ADCDONE       EZX_IRQ(4)
++#define EZX_IRQ_TS             EZX_IRQ(5) /* TS touch */
++#define EZX_IRQ_ADCDONE2      EZX_IRQ(6) /* TS x/y ADC ready */
++#define EZX_IRQ_WH            EZX_IRQ(7)
++#define EZX_IRQ_WL            EZX_IRQ(8)
++#define EZX_IRQ_ONOFF         EZX_IRQ(9)
++#define EZX_IRQ_ONOFF2                EZX_IRQ(10)
++#define EZX_IRQ_MOBPORT       EZX_IRQ(11)
++#define EZX_IRQ_TODA          EZX_IRQ(12)
++#define EZX_IRQ_1HZ           EZX_IRQ(13)
++#define EZX_IRQ_MNEXB         EZX_IRQ(14)
++#define EZX_IRQ_ST            EZX_IRQ(15)
++#define EZX_IRQ_PC            EZX_IRQ(16)
++#define EZX_IRQ_SYSRST                EZX_IRQ(17)
++#define EZX_IRQ_SOFTRESET     EZX_IRQ(18)
++#define EZX_IRQ_EOL           EZX_IRQ(19)
++#define EZX_IRQ_CLK           EZX_IRQ(20)
++#define EZX_IRQ_WARM          EZX_IRQ(21)
++
+ /* ITE8152 irqs */
+ /* add IT8152 IRQs beyond BOARD_END */
+ #ifdef CONFIG_PCI_HOST_ITE8152
+Index: linux-2.6.24/arch/arm/mach-pxa/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/Kconfig
++++ linux-2.6.24/arch/arm/mach-pxa/Kconfig
+@@ -139,6 +139,9 @@
+         This enables control code for the BP (baseband processor) found in
+         Motorola's EZX smartphone platform.
+ 
++config EZX_PCAP
++      bool "PCAP Support"
++
+ endif
+ 
+ endmenu
+Index: linux-2.6.24/arch/arm/mach-pxa/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/Makefile
++++ linux-2.6.24/arch/arm/mach-pxa/Makefile
+@@ -37,6 +37,7 @@
+ obj-$(CONFIG_PXA_EZX_A1200)   += ezx-a1200.o
+ obj-$(CONFIG_PXA_EZX_E6)      += ezx-e6.o
+ obj-$(CONFIG_EZX_BP)          += ezx-bp.o
++obj-$(CONFIG_EZX_PCAP)                += ezx-pcap.o
+ 
+ # Support for blinky lights
+ led-y := leds.o

diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-pm.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-pm.patch
new file mode 100644 (file)
index 0000000..cc08fdd
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/ezx-pm.patch
@@ -0,0 +1,108 @@
+Index: linux-2.6.24/arch/arm/mach-pxa/pxa27x.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/pxa27x.c
++++ linux-2.6.24/arch/arm/mach-pxa/pxa27x.c
+@@ -25,6 +25,10 @@
+ #include <asm/arch/pm.h>
+ #include <asm/arch/dma.h>
+ 
++#ifdef CONFIG_PXA_EZX
++#include <asm/arch/ezx.h>
++#endif
++
+ #include "generic.h"
+ #include "devices.h"
+ #include "clock.h"
+@@ -231,7 +235,12 @@
+ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
+ {
+       /* ensure not to come back here if it wasn't intended */
++#ifdef CONFIG_PXA_EZX
++      *(unsigned long *)(phys_to_virt(RESUME_ADDR)) = 0;
++      *(unsigned long *)(phys_to_virt(FLAG_ADDR)) = OFF_FLAG;
++#else
+       PSPR = 0;
++#endif
+ 
+       /* restore registers */
+       RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1);
+@@ -281,7 +290,13 @@
+               break;
+       case PM_SUSPEND_MEM:
+               /* set resume return address */
++#ifdef CONFIG_PXA_EZX
++              /* set EZX flags for blob - WM */
++              *(unsigned long *)(phys_to_virt(RESUME_ADDR)) = virt_to_phys(pxa_cpu_resume);
++              *(unsigned long *)(phys_to_virt(FLAG_ADDR)) = SLEEP_FLAG;
++#else
+               PSPR = virt_to_phys(pxa_cpu_resume);
++#endif
+               pxa27x_cpu_suspend(PWRMODE_SLEEP);
+               break;
+       }
+Index: linux-2.6.24/arch/arm/mach-pxa/ezx.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/ezx.c
++++ linux-2.6.24/arch/arm/mach-pxa/ezx.c
+@@ -18,6 +18,7 @@
+ #include <asm/arch/pxafb.h>
+ #include <asm/arch/pxa-regs.h>
+ #include <asm/arch/ohci.h>
++#include <asm/arch/system.h>
+ #include <asm/arch/ezx.h>
+ #include <asm/arch/ezx-bp.h>
+ 
+@@ -108,8 +109,53 @@
+       &ezxbp_device,
+ };
+ 
++/* PM */
++extern int bp_handshake_passed(void);
++
++static void ezx_reboot_poweroff(char mode)
++{
++      *(unsigned long *)(phys_to_virt(BPSIG_ADDR)) = NO_FLAG;
++      cpu_proc_fin();
++
++#ifdef CONFIG_EZX_BP
++      if (pxa_gpio_get_value(GPIO_BB_WDI) == 0) {
++              *(unsigned long *)(phys_to_virt(BPSIG_ADDR)) = WDI_FLAG;
++
++              /* reset BP */
++              pxa_gpio_set_value(GPIO_BB_RESET, 0);
++              mdelay(1);
++              pxa_gpio_set_value(GPIO_BB_RESET, 1);
++
++              if (mode == 'z') {
++                      arch_reset('h');
++                      while (1);
++              }
++      }
++#endif
++      if (mode == 'z')
++              /* Panic! Ask PCAP to turn both processors off */
++              pxa_gpio_set_value(GPIO_WDI_AP, 0);
++      else
++              arm_machine_restart(mode);
++
++      while (1);
++}
++
++static inline void ezx_poweroff(void)
++{
++      ezx_reboot_poweroff('z');
++}
++
++static inline void ezx_restart(char mode)
++{
++      ezx_reboot_poweroff(mode);
++}
++
+ static int __init ezx_init(void)
+ {
++      pm_power_off = ezx_poweroff;
++      arm_pm_restart = ezx_restart;
++
+       CKEN = (1 << CKEN_OSTIMER) | (1 << CKEN_MEMC);
+ 
+       pxa_gpio_mode(GPIO_ICL_FFRXD_MD);

diff --git a/packages/linux/linux-ezx-2.6.24/patches/ezx-serial-bug-workaround.patch b/packages/linux/linux-ezx-2.6.24/patches/ezx-serial-bug-workaround.patch
new file mode 100644 (file)
index 0000000..efff7e0
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/ezx-serial-bug-workaround.patch
@@ -0,0 +1,45 @@
+Work around some errata in the pxa serial code (copied from motorolas 2.4.x tree)
+
+Index: linux-2.6.24/drivers/serial/pxa.c
+===================================================================
+--- linux-2.6.24.orig/drivers/serial/pxa.c
++++ linux-2.6.24/drivers/serial/pxa.c
+@@ -29,6 +29,10 @@
+ #define SUPPORT_SYSRQ
+ #endif
+ 
++#define pxa_buggy_port(x) ({ \
++      int cpu_ver; asm("mrc%? p15, 0, %0, c0, c0" : "=r" (cpu_ver)); \
++      ((x) == PORT_PXA && (cpu_ver & ~1) == 0x69052100); })
++
+ #include <linux/module.h>
+ #include <linux/ioport.h>
+ #include <linux/init.h>
+@@ -196,7 +200,7 @@
+       if (uart_circ_empty(xmit))
+               serial_pxa_stop_tx(&up->port);
+ }
+-
++static inline irqreturn_t serial_pxa_irq(int, void *);
+ static void serial_pxa_start_tx(struct uart_port *port)
+ {
+       struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+@@ -204,6 +208,8 @@
+       if (!(up->ier & UART_IER_THRI)) {
+               up->ier |= UART_IER_THRI;
+               serial_out(up, UART_IER, up->ier);
++              if (pxa_buggy_port(up->port.type))
++                      serial_pxa_irq(up->port.irq, NULL);
+       }
+ }
+ 
+@@ -299,6 +305,9 @@
+ 
+       mcr |= up->mcr;
+ 
++      if (pxa_buggy_port(up->port.type) && up->port.irq != 0)
++              mcr ^= UART_MCR_OUT2;
++
+       serial_out(up, UART_MCR, mcr);
+ }
+ 

diff --git a/packages/linux/linux-ezx-2.6.24/patches/mux-fix-init-errorpath.patch b/packages/linux/linux-ezx-2.6.24/patches/mux-fix-init-errorpath.patch
new file mode 100644 (file)
index 0000000..716ef86
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/mux-fix-init-errorpath.patch
@@ -0,0 +1,20 @@
+Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c
+===================================================================
+--- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c    2007-01-17 00:10:32.000000000 +0100
++++ linux-2.6.16/drivers/char/ts0710_mux_usb.c 2007-01-17 00:42:23.000000000 +0100
+@@ -811,7 +811,6 @@
+       /*init the related mux interface*/
+       if (!(bvd_ipc = kzalloc(sizeof(struct ipc_usb_data), GFP_KERNEL))) {
+               err("usb_ipc_init: Out of memory.");
+-              usb_deregister(&usb_ipc_driver);
+               return -ENOMEM;
+       }
+       bvd_dbg("usb_ipc_init: Address of bvd_ipc:%p", bvd_ipc);
+@@ -819,7 +818,6 @@
+       if (!(bvd_ipc->xmit.buf = kmalloc(IPC_USB_XMIT_SIZE, GFP_KERNEL))) {
+               err("usb_ipc_init: Not enough memory for the input buffer.");
+               kfree(bvd_ipc);
+-              usb_deregister(&usb_ipc_driver);
+               return -ENOMEM;
+       }
+       bvd_dbg("usb_ipc_init: bvd_ipc->xmit.buf address:%p",

diff --git a/packages/linux/linux-ezx-2.6.24/patches/mux-fix-makefile.patch b/packages/linux/linux-ezx-2.6.24/patches/mux-fix-makefile.patch
new file mode 100644 (file)
index 0000000..9e5ae18
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/mux-fix-makefile.patch
@@ -0,0 +1,14 @@
+Index: linux-2.6.23/drivers/char/Makefile
+===================================================================
+--- linux-2.6.23.orig/drivers/char/Makefile    2007-10-22 22:26:50.000000000 +0200
++++ linux-2.6.23/drivers/char/Makefile 2007-10-22 22:26:59.000000000 +0200
+@@ -111,7 +111,8 @@
+ obj-$(CONFIG_JS_RTC)          += js-rtc.o
+ js-rtc-y = rtc.o
+ 
+-obj-$(CONFIG_TS0710_MUX) += ts0710_mux.o ts0710_mux_usb.o
++obj-$(CONFIG_TS0710_MUX_USB) += ts0710_mux_usb.o
++obj-$(CONFIG_TS0710_MUX) += ts0710_mux.o
+ 
+ 
+ # Files generated that shall be removed upon make clean

diff --git a/packages/linux/linux-ezx-2.6.24/patches/mux-fix-tty-driver.patch b/packages/linux/linux-ezx-2.6.24/patches/mux-fix-tty-driver.patch
new file mode 100644 (file)
index 0000000..2e1aabd
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/mux-fix-tty-driver.patch
@@ -0,0 +1,125 @@
+Index: linux-2.6.20.7/drivers/char/ts0710_mux.c
+===================================================================
+--- linux-2.6.20.7.orig/drivers/char/ts0710_mux.c      2007-04-22 10:51:31.000000000 +0200
++++ linux-2.6.20.7/drivers/char/ts0710_mux.c   2007-04-22 10:53:05.000000000 +0200
+@@ -241,7 +241,8 @@
+ static volatile __u8 mux_recv_info_flags[NR_MUXS];
+ static mux_recv_struct *mux_recv_queue = NULL;
+ 
+-static struct tty_driver mux_driver;
++// Local for 2.6?
++static struct tty_driver *mux_driver;
+ 
+ #ifdef USB_FOR_MUX
+ #define COMM_FOR_MUX_DRIVER usb_for_mux_driver
+@@ -3007,6 +3008,7 @@
+ #else
+       mux_tty[line]++;
+       dlci = tty2dlci[line];
++      mux_table[line] = tty;
+ 
+ /*  if( dlci == 1 ) { */
+       /* Open server channel 0 first */
+@@ -3087,6 +3089,7 @@
+               }
+       }
+ 
++
+       retval = 0;
+ #endif
+       out:
+@@ -3894,43 +3897,50 @@
+       INIT_WORK(&receive_tqueue, receive_worker, NULL);
+       INIT_WORK(&post_recv_tqueue, post_recv_worker, NULL);
+ 
+-      memset(&mux_driver, 0, sizeof(struct tty_driver));
+-      memset(&mux_tty, 0, sizeof(mux_tty));
+-      mux_driver.magic = TTY_DRIVER_MAGIC;
+-      mux_driver.driver_name = "ts0710mux";
+-      mux_driver.name = "ts0710mux";
+-      mux_driver.major = TS0710MUX_MAJOR;
+-      mux_driver.minor_start = TS0710MUX_MINOR_START;
+-      mux_driver.num = NR_MUXS;
+-      mux_driver.type = TTY_DRIVER_TYPE_SERIAL;
+-      mux_driver.subtype = SERIAL_TYPE_NORMAL;
+-      mux_driver.init_termios = tty_std_termios;
+-      mux_driver.init_termios.c_iflag = 0;
+-      mux_driver.init_termios.c_oflag = 0;
+-      mux_driver.init_termios.c_cflag = B38400 | CS8 | CREAD;
+-      mux_driver.init_termios.c_lflag = 0;
+-      mux_driver.flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
+-
+-      mux_driver.ttys = mux_table;
+-      mux_driver.termios = mux_termios;
+-      mux_driver.termios_locked = mux_termios_locked;
++      mux_driver = alloc_tty_driver(NR_MUXS);
++      if (!mux_driver)
++              return -ENOMEM;
++
++      mux_driver->owner = THIS_MODULE;
++      mux_driver->driver_name = "ts0710mux";
++      mux_driver->name = "mux";
++      mux_driver->devfs_name = "mux";
++      mux_driver->major = TS0710MUX_MAJOR;
++      mux_driver->minor_start = TS0710MUX_MINOR_START;
++      mux_driver->type = TTY_DRIVER_TYPE_SERIAL;
++      mux_driver->subtype = SERIAL_TYPE_NORMAL;
++      mux_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
++
++      mux_driver->init_termios = tty_std_termios;
++      mux_driver->init_termios.c_iflag = 0;
++      mux_driver->init_termios.c_oflag = 0;
++      mux_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
++      mux_driver->init_termios.c_lflag = 0;
++
++//    mux_driver.ttys = mux_table;
++      mux_driver->termios = mux_termios;
++      mux_driver->termios_locked = mux_termios_locked;
+ //  mux_driver.driver_state = mux_state;
+-      mux_driver.other = NULL;
++      mux_driver->other = NULL;
+ 
+-      mux_driver.open = mux_open;
+-      mux_driver.close = mux_close;
+-      mux_driver.write = mux_write;
+-      mux_driver.write_room = mux_write_room;
+-      mux_driver.flush_buffer = mux_flush_buffer;
+-      mux_driver.chars_in_buffer = mux_chars_in_buffer;
+-      mux_driver.throttle = mux_throttle;
+-      mux_driver.unthrottle = mux_unthrottle;
+-      mux_driver.ioctl = mux_ioctl;
+-      mux_driver.owner = THIS_MODULE;
++      mux_driver->open = mux_open;
++      mux_driver->close = mux_close;
++      mux_driver->write = mux_write;
++      mux_driver->write_room = mux_write_room;
++      mux_driver->flush_buffer = mux_flush_buffer;
++      mux_driver->chars_in_buffer = mux_chars_in_buffer;
++      mux_driver->throttle = mux_throttle;
++      mux_driver->unthrottle = mux_unthrottle;
++      mux_driver->ioctl = mux_ioctl;
+ 
+-      if (tty_register_driver(&mux_driver))
++      // FIXME: No panic() here
++      if (tty_register_driver(mux_driver))
+               panic("Couldn't register mux driver");
+ 
++      for (j=0; j<NR_MUXS; j++)
++              tty_register_device(mux_driver, j, NULL);
++
++
+       COMM_MUX_DISPATCHER = mux_dispatcher;
+       COMM_MUX_SENDER = mux_sender;
+ 
+@@ -3964,7 +3974,10 @@
+               mux_recv_info[j] = 0;
+       }
+ 
+-      if (tty_unregister_driver(&mux_driver))
++      for (j=0; j<NR_MUXS; j++)
++              tty_unregister_device(mux_driver, j);
++
++      if (tty_unregister_driver(mux_driver))
+               panic("Couldn't unregister mux driver");
+ }
+ 

diff --git a/packages/linux/linux-ezx-2.6.24/patches/mux-fix.patch b/packages/linux/linux-ezx-2.6.24/patches/mux-fix.patch
new file mode 100644 (file)
index 0000000..b820762
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/mux-fix.patch
@@ -0,0 +1,164 @@
+Index: linux-2.6.20.7/drivers/char/ts0710_mux_usb.c
+===================================================================
+--- linux-2.6.20.7.orig/drivers/char/ts0710_mux_usb.c  2007-04-21 18:07:45.000000000 +0200
++++ linux-2.6.20.7/drivers/char/ts0710_mux_usb.c       2007-04-21 20:55:13.000000000 +0200
+@@ -626,7 +626,6 @@
+       }
+
+       interface = &intf->cur_altsetting->desc;
+-      endpoint = &intf->cur_altsetting->endpoint[0].desc;
+       /* Start checking for two bulk endpoints or ... FIXME: This is a future
+        * enhancement...*/
+       bvd_dbg("usb_ipc_probe: Number of Endpoints:%d",
+@@ -638,30 +637,26 @@
+
+       ep_cnt = have_bulk_in_mux = have_bulk_out_mux = 0;
+
+-      bvd_dbg("usb_ipc_probe: endpoint[0] is:%x",
+-              (&endpoint[0])->bEndpointAddress);
+-      bvd_dbg("usb_ipc_probe: endpoint[1] is:%x ",
+-              (&endpoint[1])->bEndpointAddress);
+-
+       while (ep_cnt < interface->bNumEndpoints) {
+-
+-              if (!have_bulk_in_mux && IS_EP_BULK_IN(endpoint[ep_cnt])) {
+-                      bvd_dbg("usb_ipc_probe: bEndpointAddress(IN) is:%x ",
+-                              (&endpoint[ep_cnt])->bEndpointAddress);
+-                      have_bulk_in_mux =
+-                                      (&endpoint[ep_cnt])->bEndpointAddress;
+-                      readsize = (&endpoint[ep_cnt])->wMaxPacketSize;
++              endpoint = &intf->cur_altsetting->endpoint[ep_cnt].desc;
++              bvd_dbg("usb_ipc_probe: endpoint[%i] is: %x", ep_cnt,
++                      endpoint->bEndpointAddress);
++
++              if (!have_bulk_in_mux && IS_EP_BULK_IN(*endpoint)) {
++                      bvd_dbg("usb_ipc_probe: bEndpointAddress(IN) is: %x ",
++                              endpoint->bEndpointAddress);
++                      have_bulk_in_mux =  endpoint->bEndpointAddress;
++                      readsize = endpoint->wMaxPacketSize;
+                       bvd_dbg("usb_ipc_probe: readsize=%d", readsize);
+                       ep_cnt++;
+                       continue;
+               }
+
+-              if (!have_bulk_out_mux && IS_EP_BULK_OUT(endpoint[ep_cnt])) {
+-                      bvd_dbg("usb_ipc_probe: bEndpointAddress(OUT) is:%x ",
+-                              (&endpoint[ep_cnt])->bEndpointAddress);
+-                      have_bulk_out_mux =
+-                              (&endpoint[ep_cnt])->bEndpointAddress;
+-                      writesize = (&endpoint[ep_cnt])->wMaxPacketSize;
++              if (!have_bulk_out_mux && IS_EP_BULK_OUT(*endpoint)) {
++                      bvd_dbg("usb_ipc_probe: bEndpointAddress(OUT) is: %x ",
++                              endpoint->bEndpointAddress);
++                      have_bulk_out_mux = endpoint->bEndpointAddress;
++                      writesize = endpoint->wMaxPacketSize;
+                       bvd_dbg("usb_ipc_probe: writesize=%d", writesize);
+                       ep_cnt++;
+                       continue;
+@@ -718,21 +713,27 @@
+       bvd_ipc->bh_bp.func = usbipc_bh_bp_func;
+       bvd_ipc->bh_bp.data = (unsigned long) bvd_ipc;
+
++      bvd_dbg("after assignements");
+       /*Build a write urb*/
++      usb_init_urb(&bvd_ipc->writeurb_mux);
+       usb_fill_bulk_urb(&bvd_ipc->writeurb_mux, usbdev,
+                         usb_sndbulkpipe(bvd_ipc->ipc_dev,
+                                         bvd_ipc->bulk_out_ep_mux),
+                         bvd_ipc->obuf, writesize, usb_ipc_write_bulk,
+                         bvd_ipc);
+       //bvd_ipc->writeurb_mux.transfer_flags |= USB_ASYNC_UNLINK;
++      bvd_dbg("after write urb");
+
+       /*Build a read urb and send a IN token first time*/
++      usb_init_urb(&bvd_ipc->readurb_mux);
+       usb_fill_bulk_urb(&bvd_ipc->readurb_mux, usbdev,
+                         usb_rcvbulkpipe(usbdev, bvd_ipc->bulk_in_ep_mux),
+                         bvd_ipc->ibuf, readsize, usb_ipc_read_bulk, bvd_ipc);
+       //bvd_ipc->readurb_mux.transfer_flags |= USB_ASYNC_UNLINK;
++      bvd_dbg("after read urb");
+
+-      usb_driver_claim_interface(&usb_ipc_driver, intf, bvd_ipc);
++      //usb_driver_claim_interface(&usb_ipc_driver, intf, bvd_ipc);
++      bvd_dbg("after claim interface");
+       //usb_driver_claim_interface(&usb_ipc_driver, &ipccfg->interface[1], bvd_ipc);
+
+         // a2590c: dsplog is not supported by this driver
+@@ -740,6 +741,8 @@
+       //                                 &ipccfg->interface[2], bvd_ipc);
+       /*send a IN token first time*/
+       bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;
++      bvd_dbg("after assignement");
++
+       if (usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC))
+               printk("usb_ipc_prob: usb_submit_urb(read mux bulk) failed!\n");
+
+@@ -750,7 +753,7 @@
+               tasklet_schedule(&bvd_ipc->bh);
+       }
+
+-      printk("usb_ipc_probe: completed probe!");
++      printk("usb_ipc_probe: completed probe!\n");
+       usb_set_intfdata(intf, &bvd_ipc);
+       return 0;
+ }
+@@ -760,21 +763,23 @@
+       //struct usb_device *usbdev = interface_to_usbdev(intf);
+       struct ipc_usb_data *bvd_ipc_disconnect = usb_get_intfdata(intf);
+
+-      printk("usb_ipc_disconnect:*** \n");
+
++      printk("usb_ipc_disconnect. bvd_ipc_disconnect address: %p\n", bvd_ipc_disconnect);
++
++      //FIXME: Memory leak?
+       if ((UHCRHPS3 & 0x4) == 0)
+-              usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux);
++      //      usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux);
+
+-      usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux);
++      //usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux);
+
+       bvd_ipc_disconnect->ipc_flag = IPC_USB_PROBE_NOT_READY;
+       kfree(bvd_ipc_disconnect->ibuf);
+       kfree(bvd_ipc_disconnect->obuf);
+
+-      usb_driver_release_interface(&usb_ipc_driver,
+-                      bvd_ipc_disconnect->ipc_dev->actconfig->interface[0]);
+-        usb_driver_release_interface(&usb_ipc_driver,
+-                      bvd_ipc_disconnect->ipc_dev->actconfig->interface[1]);
++      //usb_driver_release_interface(&usb_ipc_driver,
++      //              bvd_ipc_disconnect->ipc_dev->actconfig->interface[0]);
++        //usb_driver_release_interface(&usb_ipc_driver,
++      //              bvd_ipc_disconnect->ipc_dev->actconfig->interface[1]);
+
+       //a2590c: dsplog interface is not supported by this driver
+       //usb_driver_release_interface(&usb_ipc_driver, &bvd_ipc_disconnect->ipc_dev->actconfig->interface[2]);
+@@ -803,13 +808,6 @@
+       int result;
+
+       bvd_dbg("init usb_ipc");
+-      /* register driver at the USB subsystem */
+-      result = usb_register(&usb_ipc_driver);
+-      if (result < 0) {
+-              err ("usb ipc driver could not be registered");
+-              return result;
+-      }
+-
+       /*init the related mux interface*/
+       if (!(bvd_ipc = kzalloc(sizeof(struct ipc_usb_data), GFP_KERNEL))) {
+               err("usb_ipc_init: Out of memory.");
+@@ -836,6 +834,14 @@
+       usb_for_mux_driver = &ipcusb_tty_driver;
+       usb_for_mux_tty = &ipcusb_tty;
+
++      /* register driver at the USB subsystem */
++      // this was called before bvd_ipc was allocated
++      result = usb_register(&usb_ipc_driver);
++      if (result < 0) {
++              err ("usb ipc driver could not be registered");
++              return result;
++      }
++
+       /* init timers for ipcusb read process and usb suspend */
+       init_timer(&ipcusb_timer);
+       ipcusb_timer.function = ipcusb_timeout;

diff --git a/packages/linux/linux-ezx-2.6.24/patches/mux-ifdef-ezx-features.patch b/packages/linux/linux-ezx-2.6.24/patches/mux-ifdef-ezx-features.patch
new file mode 100644 (file)
index 0000000..a3a6a82
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/mux-ifdef-ezx-features.patch
@@ -0,0 +1,99 @@
+Index: linux-2.6.21/drivers/char/ts0710_mux_usb.c
+===================================================================
+--- linux-2.6.21.orig/drivers/char/ts0710_mux_usb.c    2007-09-28 23:37:33.000000000 +0200
++++ linux-2.6.21/drivers/char/ts0710_mux_usb.c 2007-09-28 23:37:45.000000000 +0200
+@@ -35,10 +35,14 @@
+ #include <linux/list.h>
+ #include <linux/errno.h>
+ #include <asm/uaccess.h>
++
++#ifdef CONFIG_PXA_EZX
+ #include <asm/hardware.h>
+ #include <asm/arch/hardware.h>
+ #include <asm/arch-pxa/pxa-regs.h>
+ #include <asm/arch-pxa/ezx.h>
++#endif
++
+ #include <linux/slab.h>
+ #include <linux/miscdevice.h>
+ #include <linux/init.h>
+@@ -341,8 +345,10 @@
+ 
+ static void wakeup_timeout(unsigned long data)
+ {
++#ifdef CONFIG_PXA_EZX
+       GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
+       bvd_dbg("wakup_timeout: send GPIO_MCU_INT_SW signal!");
++#endif
+ }
+ 
+ static void suspend_timeout(unsigned long data)
+@@ -353,10 +359,12 @@
+               bvd_dbg("suspend_timeout: add the suspend timer again");
+       } else {
+               unlink_urbs(&bvd_ipc->readurb_mux);
++#ifdef CONFIG_PXA_EZX
+               UHCRHPS3 = 0x4;
+               mdelay(40);
+               bvd_dbg("suspend_timeout: send SUSPEND signal! UHCRHPS3=0x%x",
+                       UHCRHPS3);
++#endif
+       }
+ }
+ 
+@@ -404,6 +412,7 @@
+               bvd_ipc->writeurb_mux.transfer_buffer_length = buf_num;
+               bvd_dbg("ipcusb_xmit_data: copy data to write urb finished! ");
+ 
++#ifdef CONFIG_PXA_EZX
+               if ((UHCRHPS3 & 0x4) == 0x4) {
+                       static int ret;
+                       int time = 0;
+@@ -442,6 +451,7 @@
+                                       "failed! status=%d\n", ret);
+                       bvd_dbg("ipcusb_xmit_data: Send a IN token successfully!");
+               }
++#endif
+ 
+               sumbit_times++;
+               bvd_ipc->write_finished_flag = 0;
+@@ -464,12 +474,16 @@
+ 
+ static void usbipc_bh_bp_func(unsigned long param)
+ {
++#ifdef CONFIG_PXA_EZX
+       if ((UHCRHPS3 & 0x4) == 0x4) {
+               UHCRHPS3 = 0x8;
++#endif
+               mdelay(40);
++#ifdef CONFIG_PXA_EZX
+               bvd_dbg("ipcusb_softint_send_readurb: Send RESUME signal! "
+                       "UHCRHPS3=0x%x", UHCRHPS3);
+       }
++#endif
+       if (bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) {
+               //get_halted_bit();
+ 
+@@ -735,7 +749,9 @@
+       printk("usb_ipc_disconnect. bvd_ipc_disconnect address: %p\n", bvd_ipc_disconnect);
+ 
+       //FIXME: Memory leak?
++#ifdef CONFIG_PXA_EZX
+       if ((UHCRHPS3 & 0x4) == 0)
++#endif
+       //      usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux);
+ 
+       //usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux);
+Index: linux-2.6.21/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.21.orig/drivers/char/Kconfig     2007-09-29 10:52:18.000000000 +0200
++++ linux-2.6.21/drivers/char/Kconfig  2007-09-29 10:52:30.000000000 +0200
+@@ -1073,7 +1073,7 @@
+ 
+ config TS0710_MUX
+       tristate "GSM TS 07.10 Multiplex driver"
+-      depends on EZX_BP
++      depends on EZX_BP || X86
+       help
+         This implements the GSM 07.10 multiplex.
+ 

diff --git a/packages/linux/linux-ezx-2.6.24/patches/mux-linux-2.6.21-fix.patch b/packages/linux/linux-ezx-2.6.24/patches/mux-linux-2.6.21-fix.patch
new file mode 100644 (file)
index 0000000..8d5299e
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/mux-linux-2.6.21-fix.patch
@@ -0,0 +1,297 @@
+Index: linux-2.6.21/drivers/char/ts0710.h
+===================================================================
+--- linux-2.6.21.orig/drivers/char/ts0710.h    2007-04-27 20:35:44.000000000 -0300
++++ linux-2.6.21/drivers/char/ts0710.h 2007-04-27 20:36:03.000000000 -0300
+@@ -45,7 +45,6 @@
+  *  11/18/2002  Modified
+  */
+ 
+-#include <linux/config.h>
+ #include <linux/module.h>
+ 
+ #include <linux/errno.h>
+@@ -58,7 +57,6 @@
+ #include <linux/major.h>
+ #include <linux/mm.h>
+ #include <linux/init.h>
+-#include <linux/devfs_fs_kernel.h>
+ 
+ #include <asm/uaccess.h>
+ #include <asm/system.h>
+Index: linux-2.6.21/drivers/char/ts0710_mux.c
+===================================================================
+--- linux-2.6.21.orig/drivers/char/ts0710_mux.c        2007-04-27 20:35:44.000000000 -0300
++++ linux-2.6.21/drivers/char/ts0710_mux.c     2007-04-27 20:36:03.000000000 -0300
+@@ -46,7 +46,6 @@
+  *  11/18/2002  Second version
+  *  04/21/2004  Add GPRS PROC
+  */
+-#include <linux/config.h>
+ #include <linux/module.h>
+ #include <linux/types.h>
+ 
+@@ -70,15 +69,12 @@
+ #include <linux/mm.h>
+ #include <linux/slab.h>
+ #include <linux/init.h>
+-#include <linux/devfs_fs_kernel.h>
+-//#include <syslog.h>
+ 
+ #include <asm/uaccess.h>
+ #include <asm/system.h>
+ #include <asm/bitops.h>
+ 
+ #ifdef USB_FOR_MUX
+-//#include <linux/usb.h>
+ #include "ts0710_mux_usb.h"
+ #endif
+ 
+@@ -268,8 +264,8 @@
+ static struct work_struct post_recv_tqueue;
+ 
+ static struct tty_struct *mux_table[NR_MUXS];
+-static struct termios *mux_termios[NR_MUXS];
+-static struct termios *mux_termios_locked[NR_MUXS];
++static struct ktermios *mux_termios[NR_MUXS];
++static struct ktermios *mux_termios_locked[NR_MUXS];
+ static volatile short int mux_tty[NR_MUXS];
+ 
+ #ifdef min
+@@ -1894,11 +1890,7 @@
+                               if (test_bit(TTY_THROTTLED, &tty->flags)) {
+                                       queue_data = 1;
+                               } else {
+-                                      if (test_bit
+-                                          (TTY_DONT_FLIP, &tty->flags)) {
+-                                              queue_data = 1;
+-                                              post_recv = 1;
+-                                      } else if (recv_info->total) {
++                                      if (recv_info->total) {
+                                               queue_data = 1;
+                                               post_recv = 1;
+                                       } else if (recv_room < uih_len) {
+@@ -3149,10 +3141,10 @@
+ 
+ /*For BP UART problem End*/
+ 
+-static void receive_worker(void *private_)
++static void receive_worker(struct work_struct *work)
+ {
+       struct tty_struct *tty = COMM_FOR_MUX_TTY;
+-      int i, count, tbuf_free, tbuf_read;
++      int count, tbuf_free, tbuf_read;
+       static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE];
+       static unsigned char *tbuf_ptr = &tbuf[0];
+       static unsigned char *start_flag = 0;
+@@ -3168,7 +3160,7 @@
+       __u32 uih_len;
+       /*For BP UART problem End */
+ 
+-      UNUSED_PARAM(private_);
++      UNUSED_PARAM(work);
+ 
+       if (!tty)
+               return;
+@@ -3440,7 +3432,7 @@
+       clear_bit(RECV_RUNNING, &mux_recv_flags);
+ }
+ 
+-static void post_recv_worker(void *private_)
++static void post_recv_worker(struct work_struct *work)
+ {
+       ts0710_con *ts0710 = &ts0710_connection;
+       int tty_idx;
+@@ -3453,7 +3445,7 @@
+       mux_recv_packet *recv_packet, *recv_packet2;
+       __u8 j;
+ 
+-      UNUSED_PARAM(private_);
++      UNUSED_PARAM(work);
+ 
+       if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) {
+               schedule_work(&post_recv_tqueue);
+@@ -3499,10 +3491,6 @@
+               if (test_bit(TTY_THROTTLED, &tty->flags)) {
+                       add_post_recv_queue(&post_recv_q, recv_info);
+                       continue;
+-              } else if (test_bit(TTY_DONT_FLIP, &tty->flags)) {
+-                      post_recv = 1;
+-                      add_post_recv_queue(&post_recv_q, recv_info);
+-                      continue;
+               }
+ 
+               flow_control = 0;
+@@ -3635,7 +3623,7 @@
+       }
+ }
+ 
+-static void send_worker(void *private_)
++static void send_worker(struct work_struct *work)
+ {
+       ts0710_con *ts0710 = &ts0710_connection;
+       __u8 j;
+@@ -3644,7 +3632,7 @@
+       struct tty_struct *tty;
+       __u8 dlci;
+ 
+-      UNUSED_PARAM(private_);
++      UNUSED_PARAM(work);
+ 
+       TS0710_DEBUG("Enter into send_worker");
+ 
+@@ -3819,7 +3807,8 @@
+       gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].sentBytes =
+           get_count(TS0710MUX_GPRS2_SEND_COUNT_IDX);
+ 
+-      copy_to_user(buf, gprsData, bufLen);
++      if(copy_to_user(buf, gprsData, bufLen))
++              return -EFAULT;
+ 
+       return bufLen;
+ }
+@@ -3836,7 +3825,8 @@
+ 
+       memset(gprsData, 0, bufLen);
+ 
+-      copy_from_user(gprsData, buf, bufLen);
++      if(copy_from_user(gprsData, buf, bufLen))
++              return -EFAULT;
+ 
+       set_count(TS0710MUX_GPRS1_RECV_COUNT_IDX, gprsData[0].recvBytes);
+       set_count(TS0710MUX_GPRS1_SEND_COUNT_IDX, gprsData[0].sentBytes);
+@@ -3893,9 +3883,9 @@
+       }
+       post_recv_count_flag = 0;
+ 
+-      INIT_WORK(&send_tqueue, send_worker, NULL);
+-      INIT_WORK(&receive_tqueue, receive_worker, NULL);
+-      INIT_WORK(&post_recv_tqueue, post_recv_worker, NULL);
++      INIT_WORK(&send_tqueue, send_worker);
++      INIT_WORK(&receive_tqueue, receive_worker);
++      INIT_WORK(&post_recv_tqueue, post_recv_worker);
+ 
+       mux_driver = alloc_tty_driver(NR_MUXS);
+       if (!mux_driver)
+@@ -3904,12 +3894,11 @@
+       mux_driver->owner = THIS_MODULE;
+       mux_driver->driver_name = "ts0710mux";
+       mux_driver->name = "mux";
+-      mux_driver->devfs_name = "mux";
+       mux_driver->major = TS0710MUX_MAJOR;
+       mux_driver->minor_start = TS0710MUX_MINOR_START;
+       mux_driver->type = TTY_DRIVER_TYPE_SERIAL;
+       mux_driver->subtype = SERIAL_TYPE_NORMAL;
+-      mux_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
++      mux_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ 
+       mux_driver->init_termios = tty_std_termios;
+       mux_driver->init_termios.c_iflag = 0;
+@@ -3917,10 +3906,10 @@
+       mux_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
+       mux_driver->init_termios.c_lflag = 0;
+ 
+-//    mux_driver.ttys = mux_table;
++      //mux_driver.ttys = mux_table;
+       mux_driver->termios = mux_termios;
+       mux_driver->termios_locked = mux_termios_locked;
+-//  mux_driver.driver_state = mux_state;
++      //mux_driver.driver_state = mux_state;
+       mux_driver->other = NULL;
+ 
+       mux_driver->open = mux_open;
+Index: linux-2.6.21/drivers/char/ts0710_mux_usb.c
+===================================================================
+--- linux-2.6.21.orig/drivers/char/ts0710_mux_usb.c    2007-04-27 20:35:44.000000000 -0300
++++ linux-2.6.21/drivers/char/ts0710_mux_usb.c 2007-04-27 22:34:31.000000000 -0300
+@@ -188,7 +188,8 @@
+       buf_list_t *inbuf;
+       int count = urb->actual_length;
+ 
+-      inbuf = kmalloc(sizeof(buf_list_t), GFP_KERNEL);
++      // we are called from interrupt context.
++      inbuf = kmalloc(sizeof(buf_list_t), GFP_ATOMIC);
+       if (!inbuf) {
+               printk("append_to_inbuf_list: (%d) out of memory!\n",
+                       sizeof(buf_list_t));
+@@ -196,7 +197,7 @@
+       }
+ 
+       inbuf->size = count;
+-      inbuf->body = kmalloc(sizeof(char)*count, GFP_KERNEL);
++      inbuf->body = kmalloc(sizeof(char)*count, GFP_ATOMIC);
+       if (!inbuf->body) {
+               kfree(inbuf);
+               printk("append_to_inbuf_list: (%d) out of memory!\n",
+@@ -222,7 +223,7 @@
+               inbuf = list_entry(ptr, buf_list_t, list);
+               src_count = inbuf->size;
+               if (dst_count >= src_count) {
+-                      memcpy(buf, inbuf->body, src_count);
++                      memcpy((unsigned char *)buf, inbuf->body, src_count);
+                       ret = src_count;
+                       list_del(ptr);
+                       kfree(inbuf->body);
+@@ -282,9 +283,8 @@
+       spin_unlock(&bvd_ipc->in_buf_lock);
+ }
+ 
+-static void usb_ipc_read_bulk(struct urb *urb, struct pt_regs *regs)
++static void usb_ipc_read_bulk(struct urb *urb)
+ {
+-      buf_list_t *inbuf;
+       int count = urb->actual_length;
+       struct tty_struct *tty = &ipcusb_tty;
+ 
+@@ -319,7 +319,7 @@
+       bvd_dbg("usb_ipc_read_bulk: completed!!!");
+ }
+ 
+-static void usb_ipc_write_bulk(struct urb *urb, struct pt_regs *regs)
++static void usb_ipc_write_bulk(struct urb *urb)
+ {
+       callback_times++;
+       bvd_ipc->write_finished_flag = 1;
+@@ -437,7 +437,7 @@
+                       /*send IN token*/
+                       bvd_ipc->readurb_mux.actual_length = 0;
+                       bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;
+-                      if (ret = usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC))
++                      if ((ret = usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC)))
+                               printk("ipcusb_xmit_data: usb_submit_urb(read mux bulk)"
+                                       "failed! status=%d\n", ret);
+                       bvd_dbg("ipcusb_xmit_data: Send a IN token successfully!");
+@@ -447,7 +447,7 @@
+               bvd_ipc->write_finished_flag = 0;
+               //printk("%s: clear write_finished_flag:%d\n", __FUNCTION__, bvd_ipc->write_finished_flag);
+               bvd_ipc->writeurb_mux.dev = bvd_ipc->ipc_dev;
+-              if (result = usb_submit_urb(&bvd_ipc->writeurb_mux, GFP_ATOMIC))
++              if ((result = usb_submit_urb(&bvd_ipc->writeurb_mux, GFP_ATOMIC)))
+                       warn("ipcusb_xmit_data: funky result! result=%d\n", result);
+ 
+               bvd_dbg("ipcusb_xmit_data: usb_submit_urb finished! result:%d", result);
+@@ -498,7 +498,7 @@
+               return 0;
+ 
+       if (*ipcusb_ap_to_bp != NULL)
+-              (*ipcusb_ap_to_bp)(buf, count);
++              (*ipcusb_ap_to_bp)((unsigned char *)buf, count);
+ 
+       bvd_ipc->suspend_flag = 1;
+ 
+@@ -602,6 +602,7 @@
+       }
+ 
+       ep_cnt = have_bulk_in_mux = have_bulk_out_mux = 0;
++      readsize = writesize = 0;
+ 
+       while (ep_cnt < interface->bNumEndpoints) {
+               endpoint = &intf->cur_altsetting->endpoint[ep_cnt].desc;
+@@ -792,6 +793,8 @@
+       bvd_ipc->ipc_dev = NULL;
+       bvd_ipc->xmit.head = bvd_ipc->xmit.tail = 0;
+       bvd_ipc->write_flag = IPC_USB_WRITE_INIT;
++      spin_lock_init(&bvd_ipc->lock);
++      spin_lock_init(&bvd_ipc->in_buf_lock);
+ 
+       ipcusb_tty_driver.write = usb_ipc_write;
+       ipcusb_tty_driver.chars_in_buffer = usb_ipc_chars_in_buffer;

diff --git a/packages/linux/linux-ezx-2.6.24/patches/mux-remove-flipbuffers.patch b/packages/linux/linux-ezx-2.6.24/patches/mux-remove-flipbuffers.patch
new file mode 100644 (file)
index 0000000..d4781f9
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/mux-remove-flipbuffers.patch
@@ -0,0 +1,269 @@
+Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c
+===================================================================
+--- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c    2007-01-17 00:52:25.000000000 +0100
++++ linux-2.6.16/drivers/char/ts0710_mux_usb.c 2007-01-17 00:52:26.000000000 +0100
+@@ -133,6 +133,7 @@
+
+       struct circ_buf         xmit;           /* write cric bufffer */
+       struct list_head        in_buf_list;
++      spinlock_t              in_buf_lock;
+       char                    bulk_in_ep_mux,
+                               bulk_out_ep_mux,
+                               bulk_in_ep_dsplog;
+@@ -204,9 +205,39 @@
+               return;
+       }
+       memcpy(inbuf->body, (unsigned char*)urb->transfer_buffer, count);
++      spin_lock(&bvd_ipc->in_buf_lock);
+       list_add_tail(&inbuf->list, &bvd_ipc->in_buf_list);
++      spin_unlock(&bvd_ipc->in_buf_lock);
+ }
+
++int get_from_inbuf_list(const unsigned char *buf, int dst_count)
++{
++      int ret = 0;
++      spin_lock(&bvd_ipc->in_buf_lock);
++      if (!(list_empty(&bvd_ipc->in_buf_list))) {
++              int src_count;
++              buf_list_t *inbuf;
++              struct list_head *ptr;
++
++              ptr = bvd_ipc->in_buf_list.next;
++              inbuf = list_entry(ptr, buf_list_t, list);
++              src_count = inbuf->size;
++              if (dst_count >= src_count) {
++                      memcpy(buf, inbuf->body, src_count);
++                      ret = src_count;
++                      list_del(ptr);
++                      kfree(inbuf->body);
++                      kfree(inbuf);
++              } else {
++                      bvd_dbg("get_from_inbuf_list: not enough space in destination buffer");
++              }
++      }
++      spin_unlock(&bvd_ipc->in_buf_lock);
++
++      return ret;
++}
++EXPORT_SYMBOL(get_from_inbuf_list);
++
+ static void ipcusb_timeout(unsigned long data)
+ {
+       struct tty_struct *tty = &ipcusb_tty;
+@@ -214,13 +245,14 @@
+
+       bvd_dbg("ipcusb_timeout***");
+
++      spin_lock(&bvd_ipc->in_buf_lock);
+       while (!(list_empty(&bvd_ipc->in_buf_list))) {
+               int count;
+               buf_list_t *inbuf;
+               struct list_head *ptr = NULL;
+
+               ptr = bvd_ipc->in_buf_list.next;
+-              inbuf = list_entry (ptr, buf_list_t, list);
++              inbuf = list_entry(ptr, buf_list_t, list);
+               count = inbuf->size;
+               if (tty_insert_flip_string(tty, inbuf->body, count) >= count) {
+                       list_del(ptr);
+@@ -232,10 +264,12 @@
+                       break;
+               }
+       }
++      spin_unlock(&bvd_ipc->in_buf_lock);
+
+       if (usb_mux_dispatcher)
+               usb_mux_dispatcher(tty);        /**call Liu changhui's func.**/
+
++      spin_lock(&bvd_ipc->in_buf_lock);
+       if (list_empty(&bvd_ipc->in_buf_list)) {
+               urb->actual_length = 0;
+               urb->dev = bvd_ipc->ipc_dev;
+@@ -246,6 +280,7 @@
+               ipcusb_timer.data = (unsigned long)urb;
+               mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
+       }
++      spin_unlock(&bvd_ipc->in_buf_lock);
+ }
+
+ static void usb_ipc_read_bulk(struct urb *urb, struct pt_regs *regs)
+@@ -266,69 +301,11 @@
+       if (count > 0 && ((*ipcusb_bp_to_ap) != NULL))
+               (*ipcusb_bp_to_ap)(urb->transfer_buffer, urb->actual_length);
+
+-      if (!(list_empty(&bvd_ipc->in_buf_list))) {
+-              int need_mux = 0;
+-
+-              bvd_dbg("usb_ipc_read_bulk: some urbs in_buf_list");
+-              if (count > 0) {
+-                      bvd_ipc->suspend_flag = 1;
+-                      append_to_inbuf_list(urb); /* append the current received urb */
+-#if 0
+-                      if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
+-                      {
+-                              last_jiff = jiffies;
+-                              queue_apm_event(KRNL_ICL, NULL);
+-                      }
+-#endif
+-              }
+-
+-              while (!(list_empty(&bvd_ipc->in_buf_list))) {
+-                      struct list_head* ptr = NULL;
+-                      ptr = bvd_ipc->in_buf_list.next;
+-                      inbuf = list_entry(ptr, buf_list_t, list);
+-                      count = inbuf->size;
+-                      need_mux = 1;
+-
+-                      tty_insert_flip_string(tty, inbuf->body, count);
+-
+-                      list_del(ptr);
+-                      kfree(inbuf->body);
+-                      inbuf->body = NULL;
+-                      kfree(inbuf);
+-              }
+-
+-              if (usb_mux_dispatcher && need_mux)
+-                      usb_mux_dispatcher(tty); /* call Liu changhui's func. */
+-
+-              if (list_empty(&bvd_ipc->in_buf_list)) {
+-                      urb->actual_length = 0;
+-                      urb->dev = bvd_ipc->ipc_dev;
+-                      if (usb_submit_urb(urb, GFP_ATOMIC))
+-                              bvd_dbg("usb_ipc_read_bulk: "
+-                                      "failed resubmitting read urb");
+-                      bvd_dbg("usb_ipc_read_bulk: resubmited read urb");
+-              } else {
+-                      ipcusb_timer.data = (unsigned long)urb;
+-                      mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
+-              }
+-      } else if (count > 0) {
+-              bvd_dbg("usb_ipc_read_bulk: no urbs in_buf_list");
++      if (count > 0) {
++              bvd_dbg("usb_ipc_read_bulk: inserting buffer into in_buf_list");
+               bvd_ipc->suspend_flag = 1;
+
+-              if (tty_insert_flip_string(tty, urb->transfer_buffer,
+-                                         count) < count) {
+-                      bvd_ipc->suspend_flag = 1;
+-                      append_to_inbuf_list(urb);
+-                      ipcusb_timer.data = (unsigned long)urb;
+-                      mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
+-#if 0
+-                      if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
+-                      {
+-                              last_jiff = jiffies;
+-                              queue_apm_event(KRNL_ICL, NULL);
+-                      }
+-#endif
+-              }
++              append_to_inbuf_list(urb);
+
+               if (usb_mux_dispatcher)
+                       usb_mux_dispatcher(tty); /* call Liu changhui's func. */
+@@ -337,13 +314,6 @@
+               urb->dev = bvd_ipc->ipc_dev;
+               if (usb_submit_urb(urb, GFP_ATOMIC))
+                       bvd_dbg("failed resubmitting read urb");
+-#if 0
+-              if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
+-              {
+-                      last_jiff = jiffies;
+-                      queue_apm_event(KRNL_ICL, NULL);
+-              }
+-#endif
+               bvd_dbg("usb_ipc_read_bulk: resubmited read urb");
+       }
+
+@@ -705,7 +675,8 @@
+       bvd_ipc->bulk_out_ep_mux= have_bulk_out_mux;
+       bvd_ipc->ipc_dev = usbdev;
+       bvd_ipc->writesize = writesize;
+-      INIT_LIST_HEAD (&bvd_ipc->in_buf_list);
++      INIT_LIST_HEAD(&bvd_ipc->in_buf_list);
++      bvd_ipc->in_buf_lock = SPIN_LOCK_UNLOCKED;
+
+       bvd_ipc->bh.func = usbipc_bh_func;
+       bvd_ipc->bh.data = (unsigned long) bvd_ipc;
+Index: linux-2.6.16/drivers/char/ts0710_mux.c
+===================================================================
+--- linux-2.6.16.orig/drivers/char/ts0710_mux.c        2007-01-17 00:52:23.000000000 +0100
++++ linux-2.6.16/drivers/char/ts0710_mux.c     2007-01-17 00:52:26.000000000 +0100
+@@ -3149,7 +3149,7 @@
+ static void receive_worker(void *private_)
+ {
+       struct tty_struct *tty = COMM_FOR_MUX_TTY;
+-      int i, count;
++      int i, count, tbuf_free, tbuf_read;
+       static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE];
+       static unsigned char *tbuf_ptr = &tbuf[0];
+       static unsigned char *start_flag = 0;
+@@ -3167,29 +3167,39 @@
+
+       UNUSED_PARAM(private_);
+
+-      if (!tty)
+-              return;
++      if (!tty)
++              return;
++
++      while (1) {
++              tbuf_free = TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf);
++              TS0710_PRINTK("Reading max %i bytes from ts0710_mux_usb inbuf.\n", tbuf_free);
++              tbuf_read = get_from_inbuf_list(tbuf_ptr, tbuf_free);
++              if (tbuf_read == 0) {
++                      break;
++              } else {
++                      TS0710_PRINTK("Read %i bytes.\n", tbuf_read);
++              };
++              tbuf_ptr += tbuf_read;
++      };
++
++      count = (tbuf_ptr - tbuf);
++
++      // Should be impossible?
++      //if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) {
++      //      TS0710_PRINTK
++      //          ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n");
++      //      count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf));
++      //}
+
+ #ifdef USB_FOR_MUX
+-      TS0710_DEBUG("Receive following bytes from IPC-USB");
++      TS0710_DEBUG("Received following bytes from IPC-USB");
+ #else
+-      TS0710_DEBUG("Receive following bytes from UART");
++      TS0710_DEBUG("Received following bytes from UART");
+ #endif
+-
+-      TS0710_DEBUGHEX(cp, count);
+-
+-      if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) {
+-              TS0710_PRINTK
+-                  ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n");
+-              count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf));
+-      }
+-
+-      count = tty_buffer_request_room(tty, count);
+-
+-      for (i = 0; i < count; i++)
+-              tty_insert_flip_char(tty, tbuf_ptr[i], TTY_NORMAL);
+-
+-      tbuf_ptr += count;
++      TS0710_DEBUGHEX(tbuf, count);
++
++      //gets updated above
++      //tbuf_ptr += count;
+       search = &tbuf[0];
+
+       if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) {
+Index: linux-2.6.16/drivers/char/ts0710_mux_usb.h
+===================================================================
+--- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.h    2007-01-17 00:52:23.000000000 +0100
++++ linux-2.6.16/drivers/char/ts0710_mux_usb.h 2007-01-17 00:52:26.000000000 +0100
+@@ -27,3 +27,6 @@
+ extern struct tty_struct *usb_for_mux_tty;
+ extern void (*usb_mux_dispatcher)(struct tty_struct *tty);
+ extern void (*usb_mux_sender)(void);
++
++extern int get_from_inbuf_list(const unsigned char *buf, int dst_count);
++

diff --git a/packages/linux/linux-ezx-2.6.24/patches/mux-remove-get_halted_bit.patch b/packages/linux/linux-ezx-2.6.24/patches/mux-remove-get_halted_bit.patch
new file mode 100644 (file)
index 0000000..0ebe27d
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/mux-remove-get_halted_bit.patch
@@ -0,0 +1,22 @@
+Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c
+===================================================================
+--- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c    2007-01-17 01:06:21.000000000 +0100
++++ linux-2.6.16/drivers/char/ts0710_mux_usb.c 2007-01-17 01:06:31.000000000 +0100
+@@ -461,7 +461,7 @@
+       ipcusb_xmit_data();
+ }
+
+-extern void get_halted_bit(void);
++//extern void get_halted_bit(void);
+
+ static void usbipc_bh_bp_func(unsigned long param)
+ {
+@@ -472,7 +472,7 @@
+                       "UHCRHPS3=0x%x", UHCRHPS3);
+       }
+       if (bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) {
+-              get_halted_bit();
++              //get_halted_bit();
+
+               /*send a IN token*/
+               bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;

diff --git a/packages/linux/linux-ezx-2.6.24/patches/mux-remove-usbh_finished_resume.patch b/packages/linux/linux-ezx-2.6.24/patches/mux-remove-usbh_finished_resume.patch
new file mode 100644 (file)
index 0000000..c415ded
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/mux-remove-usbh_finished_resume.patch
@@ -0,0 +1,22 @@
+Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c
+===================================================================
+--- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c    2007-01-17 01:12:23.000000000 +0100
++++ linux-2.6.16/drivers/char/ts0710_mux_usb.c 2007-01-17 01:12:37.000000000 +0100
+@@ -97,7 +97,6 @@
+ static int sumbit_times = 0;
+ static int callback_times = 0;
+ //static unsigned long last_jiff = 0;
+-extern int usbh_finished_resume;
+ /*end global values defined*/
+
+ MODULE_AUTHOR(DRIVER_AUTHOR);
+@@ -546,9 +545,6 @@
+ void usb_send_readurb(void)
+ {
+       //printk("usb_send_readurb: begining!UHCRHPS3=0x%x, usbh_finished_resume=%d\n", UHCRHPS3, usbh_finished_resume);
+-
+-      if (usbh_finished_resume == 0)
+-              return;
+
+       tasklet_schedule(&bvd_ipc->bh_bp);
+ }

diff --git a/packages/linux/linux-ezx-2.6.24/patches/mux_cli.patch b/packages/linux/linux-ezx-2.6.24/patches/mux_cli.patch
new file mode 100644 (file)
index 0000000..3e8e3e2
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/mux_cli.patch
@@ -0,0 +1,5396 @@
+Index: linux-2.6.24/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.24.orig/drivers/char/Kconfig
++++ linux-2.6.24/drivers/char/Kconfig
+@@ -1040,5 +1040,18 @@
+ 
+ source "drivers/s390/char/Kconfig"
+ 
++config TS0710_MUX
++      tristate "GSM TS 07.10 Multiplex driver"
++      depends on EZX_BP
++      help
++        This implements the GSM 07.10 multiplex.
++
++config TS0710_MUX_USB
++      tristate "Motorola USB support for TS 07.10 Multiplex driver"
++      depends on TS0710_MUX
++      help
++        This ads support for TS 07.10 over USB, as found in motorola
++        Smartphones.
++
+ endmenu
+ 
+Index: linux-2.6.24/drivers/char/Makefile
+===================================================================
+--- linux-2.6.24.orig/drivers/char/Makefile
++++ linux-2.6.24/drivers/char/Makefile
+@@ -111,6 +111,9 @@
+ obj-$(CONFIG_JS_RTC)          += js-rtc.o
+ js-rtc-y = rtc.o
+ 
++obj-$(CONFIG_TS0710_MUX) += ts0710_mux.o ts0710_mux_usb.o
++
++
+ # Files generated that shall be removed upon make clean
+ clean-files := consolemap_deftbl.c defkeymap.c
+ 
+Index: linux-2.6.24/drivers/char/ts0710.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/char/ts0710.h
+@@ -0,0 +1,368 @@
++/*
++ * File: ts0710.h
++ *
++ * Portions derived from rfcomm.c, original header as follows:
++ *
++ * Copyright (C) 2000, 2001  Axis Communications AB
++ *
++ * Author: Mats Friden <mats.friden@axis.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ *
++ * Exceptionally, Axis Communications AB grants discretionary and
++ * conditional permissions for additional use of the text contained
++ * in the company's release of the AXIS OpenBT Stack under the
++ * provisions set forth hereunder.
++ *
++ * Provided that, if you use the AXIS OpenBT Stack with other files,
++ * that do not implement functionality as specified in the Bluetooth
++ * System specification, to produce an executable, this does not by
++ * itself cause the resulting executable to be covered by the GNU
++ * General Public License. Your use of that executable is in no way
++ * restricted on account of using the AXIS OpenBT Stack code with it.
++ *
++ * This exception does not however invalidate any other reasons why
++ * the executable file might be covered by the provisions of the GNU
++ * General Public License.
++ *
++ */
++/*
++ * Copyright (C) 2002  Motorola
++ *
++ *  07/28/2002  Initial version based on rfcomm.c
++ *  11/18/2002  Modified
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++
++#include <linux/errno.h>
++#include <linux/sched.h>
++#include <linux/interrupt.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/fcntl.h>
++#include <linux/string.h>
++#include <linux/major.h>
++#include <linux/mm.h>
++#include <linux/init.h>
++#include <linux/devfs_fs_kernel.h>
++
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <asm/bitops.h>
++
++#include <asm/byteorder.h>
++#include <asm/types.h>
++
++#define TS0710_MAX_CHN 14
++
++#define SET_PF(ctr) ((ctr) | (1 << 4))
++#define CLR_PF(ctr) ((ctr) & 0xef)
++#define GET_PF(ctr) (((ctr) >> 4) & 0x1)
++
++#define GET_PN_MSG_FRAME_SIZE(pn) ( ((pn)->frame_sizeh << 8) | ((pn)->frame_sizel))
++#define SET_PN_MSG_FRAME_SIZE(pn, size) ({ (pn)->frame_sizel = (size) & 0xff; \
++                                           (pn)->frame_sizeh = (size) >> 8; })
++
++#define GET_LONG_LENGTH(a) ( ((a).h_len << 7) | ((a).l_len) )
++#define SET_LONG_LENGTH(a, length) ({ (a).ea = 0; \
++                                      (a).l_len = length & 0x7F; \
++                                      (a).h_len = (length >> 7) & 0xFF; })
++
++#define SHORT_CRC_CHECK 3
++#define LONG_CRC_CHECK 4
++
++/* FIXME: Should thsi one be define here? */
++#define SHORT_PAYLOAD_SIZE 127
++
++#define EA 1
++#define FCS_SIZE 1
++#define FLAG_SIZE 2
++
++#define TS0710_MAX_HDR_SIZE 5
++#define DEF_TS0710_MTU 256
++
++#define TS0710_BASIC_FLAG 0xF9
++/* the control field */
++#define SABM 0x2f
++#define SABM_SIZE 4
++#define UA 0x63
++#define UA_SIZE 4
++#define DM 0x0f
++#define DISC 0x43
++#define UIH 0xef
++
++/* the type field in a multiplexer command packet */
++#define TEST 0x8
++#define FCON 0x28
++#define FCOFF 0x18
++#define MSC 0x38
++#define RPN 0x24
++#define RLS 0x14
++#define PN 0x20
++#define NSC 0x4
++
++/* V.24 modem control signals */
++#define FC 0x2
++#define RTC 0x4
++#define RTR 0x8
++#define IC 0x40
++#define DV 0x80
++
++#define CTRL_CHAN 0           /* The control channel is defined as DLCI 0 */
++#define MCC_CMD 1             /* Multiplexer command cr */
++#define MCC_RSP 0             /* Multiplexer response cr */
++
++#ifdef __LITTLE_ENDIAN_BITFIELD
++
++typedef struct {
++      __u8 ea:1;
++      __u8 cr:1;
++      __u8 d:1;
++      __u8 server_chn:5;
++} __attribute__ ((packed)) address_field;
++
++typedef struct {
++      __u8 ea:1;
++      __u8 len:7;
++} __attribute__ ((packed)) short_length;
++
++typedef struct {
++      __u8 ea:1;
++      __u8 l_len:7;
++      __u8 h_len;
++} __attribute__ ((packed)) long_length;
++
++typedef struct {
++      address_field addr;
++      __u8 control;
++      short_length length;
++} __attribute__ ((packed)) short_frame_head;
++
++typedef struct {
++      short_frame_head h;
++      __u8 data[0];
++} __attribute__ ((packed)) short_frame;
++
++typedef struct {
++      address_field addr;
++      __u8 control;
++      long_length length;
++      __u8 data[0];
++} __attribute__ ((packed)) long_frame_head;
++
++typedef struct {
++      long_frame_head h;
++      __u8 data[0];
++} __attribute__ ((packed)) long_frame;
++
++/* Typedefinitions for structures used for the multiplexer commands */
++typedef struct {
++      __u8 ea:1;
++      __u8 cr:1;
++      __u8 type:6;
++} __attribute__ ((packed)) mcc_type;
++
++typedef struct {
++      mcc_type type;
++      short_length length;
++      __u8 value[0];
++} __attribute__ ((packed)) mcc_short_frame_head;
++
++typedef struct {
++      mcc_short_frame_head h;
++      __u8 value[0];
++} __attribute__ ((packed)) mcc_short_frame;
++
++typedef struct {
++      mcc_type type;
++      long_length length;
++      __u8 value[0];
++} __attribute__ ((packed)) mcc_long_frame_head;
++
++typedef struct {
++      mcc_long_frame_head h;
++      __u8 value[0];
++} __attribute__ ((packed)) mcc_long_frame;
++
++/* MSC-command */
++typedef struct {
++      __u8 ea:1;
++      __u8 fc:1;
++      __u8 rtc:1;
++      __u8 rtr:1;
++      __u8 reserved:2;
++      __u8 ic:1;
++      __u8 dv:1;
++} __attribute__ ((packed)) v24_sigs;
++
++typedef struct {
++      __u8 ea:1;
++      __u8 b1:1;
++      __u8 b2:1;
++      __u8 b3:1;
++      __u8 len:4;
++} __attribute__ ((packed)) brk_sigs;
++
++typedef struct {
++      short_frame_head s_head;
++      mcc_short_frame_head mcc_s_head;
++      address_field dlci;
++      __u8 v24_sigs;
++      //brk_sigs break_signals;
++      __u8 fcs;
++} __attribute__ ((packed)) msc_msg;
++
++#if 0
++/* conflict with termios.h */
++/* RPN command */
++#define B2400 0
++#define B4800 1
++#define B7200 2
++#define B9600 3
++#define B19200 4
++#define B38400 5
++#define B57600 6
++#define B115200 7
++#define D230400 8
++#endif
++
++/*
++typedef struct{
++  __u8 bit_rate:1;
++  __u8 data_bits:1;
++  __u8 stop_bit:1;
++  __u8 parity:1;
++  __u8 parity_type:1;
++  __u8 xon_u8:1;
++  __u8 xoff_u8:1;
++  __u8 res1:1;
++  __u8 xon_input:1;
++  __u8 xon_output:1;
++  __u8 rtr_input:1;
++  __u8 rtr_output:1;
++  __u8 rtc_input:1;
++  __u8 rtc_output:1;
++  __u8 res2:2;
++} __attribute__((packed)) parameter_mask;
++
++typedef struct{
++  __u8 bit_rate;
++  __u8 data_bits:2;
++  __u8 stop_bit:1;
++  __u8 parity:1;
++  __u8 parity_type:2;
++  __u8 res1:2;
++  __u8 xon_input:1;
++  __u8 xon_output:1;
++  __u8 rtr_input:1;
++  __u8 rtr_output:1;
++  __u8 rtc_input:1;
++  __u8 rtc_output:1;
++  __u8 res2:2;
++  __u8 xon_u8;
++  __u8 xoff_u8;
++  parameter_mask pm;
++} __attribute__((packed)) rpn_values;
++
++typedef struct{
++  short_frame_head s_head;
++  mcc_short_frame_head mcc_s_head;
++  address_field dlci;
++  rpn_values rpn_val;
++  __u8 fcs;
++} __attribute__((packed)) rpn_msg;
++*/
++
++/* RLS-command */
++/*
++typedef struct{
++  short_frame_head s_head;
++  mcc_short_frame_head mcc_s_head;
++  address_field dlci;
++  __u8 error:4;
++  __u8 res:4;
++  __u8 fcs;
++} __attribute__((packed)) rls_msg;
++*/
++
++/* PN-command */
++typedef struct {
++      short_frame_head s_head;
++      mcc_short_frame_head mcc_s_head;
++      __u8 dlci:6;
++      __u8 res1:2;
++      __u8 frame_type:4;
++      __u8 credit_flow:4;
++      __u8 prior:6;
++      __u8 res2:2;
++      __u8 ack_timer;
++      __u8 frame_sizel;
++      __u8 frame_sizeh;
++      __u8 max_nbrof_retrans;
++      __u8 credits;
++      __u8 fcs;
++} __attribute__ ((packed)) pn_msg;
++
++/* NSC-command */
++typedef struct {
++      short_frame_head s_head;
++      mcc_short_frame_head mcc_s_head;
++      mcc_type command_type;
++      __u8 fcs;
++} __attribute__ ((packed)) nsc_msg;
++
++#else
++#error Only littel-endianess supported now!
++#endif
++
++enum {
++      REJECTED = 0,
++      DISCONNECTED,
++      CONNECTING,
++      NEGOTIATING,
++      CONNECTED,
++      DISCONNECTING,
++      FLOW_STOPPED
++};
++
++enum ts0710_events {
++      CONNECT_IND,
++      CONNECT_CFM,
++      DISCONN_CFM
++};
++
++typedef struct {
++      volatile __u8 state;
++      volatile __u8 flow_control;
++      volatile __u8 initiated;
++      volatile __u8 initiator;
++      volatile __u16 mtu;
++      wait_queue_head_t open_wait;
++      wait_queue_head_t close_wait;
++} dlci_struct;
++
++/* user space interfaces */
++typedef struct {
++      volatile __u8 initiator;
++      volatile __u8 c_dlci;
++      volatile __u16 mtu;
++      volatile __u8 be_testing;
++      volatile __u32 test_errs;
++      wait_queue_head_t test_wait;
++
++      dlci_struct dlci[TS0710_MAX_CHN];
++} ts0710_con;
+Index: linux-2.6.24/drivers/char/ts0710_mux.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/char/ts0710_mux.c
+@@ -0,0 +1,3966 @@
++/*
++ * File: mux_driver.c
++ *
++ * Portions derived from rfcomm.c, original header as follows:
++ *
++ * Copyright (C) 2000, 2001  Axis Communications AB
++ *
++ * Author: Mats Friden <mats.friden@axis.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ *
++ * Exceptionally, Axis Communications AB grants discretionary and
++ * conditional permissions for additional use of the text contained
++ * in the company's release of the AXIS OpenBT Stack under the
++ * provisions set forth hereunder.
++ *
++ * Provided that, if you use the AXIS OpenBT Stack with other files,
++ * that do not implement functionality as specified in the Bluetooth
++ * System specification, to produce an executable, this does not by
++ * itself cause the resulting executable to be covered by the GNU
++ * General Public License. Your use of that executable is in no way
++ * restricted on account of using the AXIS OpenBT Stack code with it.
++ *
++ * This exception does not however invalidate any other reasons why
++ * the executable file might be covered by the provisions of the GNU
++ * General Public License.
++ *
++ */
++/*
++ * Copyright (C) 2002-2004  Motorola
++ * Copyright (C) 2006 Harald Welte <laforge@openezx.org>
++ *
++ *  07/28/2002  Initial version
++ *  11/18/2002  Second version
++ *  04/21/2004  Add GPRS PROC
++ */
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/types.h>
++
++#include <linux/kernel.h>
++#include <linux/proc_fs.h>
++
++#define USB_FOR_MUX
++
++#ifndef USB_FOR_MUX
++#include <linux/serial.h>
++#endif
++
++#include <linux/errno.h>
++#include <linux/sched.h>
++#include <linux/interrupt.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/fcntl.h>
++#include <linux/string.h>
++#include <linux/major.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/devfs_fs_kernel.h>
++//#include <syslog.h>
++
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <asm/bitops.h>
++
++#ifdef USB_FOR_MUX
++//#include <linux/usb.h>
++#include "ts0710_mux_usb.h"
++#endif
++
++#include "ts0710.h"
++#include "ts0710_mux.h"
++
++#define TS0710MUX_GPRS_SESSION_MAX 2
++#define TS0710MUX_MAJOR 250
++#define TS0710MUX_MINOR_START 0
++#define NR_MUXS 16
++
++                                /*#define TS0710MUX_TIME_OUT 30 *//* 300ms  */
++#define TS0710MUX_TIME_OUT 250        /* 2500ms, for BP UART hardware flow control AP UART  */
++
++#define TS0710MUX_IO_DLCI_FC_ON 0x54F2
++#define TS0710MUX_IO_DLCI_FC_OFF 0x54F3
++#define TS0710MUX_IO_FC_ON 0x54F4
++#define TS0710MUX_IO_FC_OFF 0x54F5
++
++#define TS0710MUX_MAX_BUF_SIZE 2048
++
++#define TS0710MUX_SEND_BUF_OFFSET 10
++#define TS0710MUX_SEND_BUF_SIZE (DEF_TS0710_MTU + TS0710MUX_SEND_BUF_OFFSET + 34)
++#define TS0710MUX_RECV_BUF_SIZE TS0710MUX_SEND_BUF_SIZE
++
++/*For BP UART problem Begin*/
++#ifdef TS0710SEQ2
++#define ACK_SPACE 66          /* 6 * 11(ACK frame size)  */
++#else
++#define ACK_SPACE 42          /* 6 * 7(ACK frame size)  */
++#endif
++/*For BP UART problem End*/
++
++                                                                           /*#define TS0710MUX_SERIAL_BUF_SIZE (DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE)*//* For BP UART problem  */
++#define TS0710MUX_SERIAL_BUF_SIZE (DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE + ACK_SPACE)  /* For BP UART problem: ACK_SPACE  */
++
++#define TS0710MUX_MAX_TOTAL_FRAME_SIZE (DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE + FLAG_SIZE)
++#define TS0710MUX_MAX_CHARS_IN_BUF 65535
++#define TS0710MUX_THROTTLE_THRESHOLD DEF_TS0710_MTU
++
++#define TEST_PATTERN_SIZE 250
++
++#define CMDTAG 0x55
++#define DATATAG 0xAA
++
++#define ACK 0x4F              /*For BP UART problem */
++
++/*For BP UART problem Begin*/
++#ifdef TS0710SEQ2
++#define FIRST_BP_SEQ_OFFSET 1 /*offset from start flag */
++#define SECOND_BP_SEQ_OFFSET 2        /*offset from start flag */
++#define FIRST_AP_SEQ_OFFSET 3 /*offset from start flag */
++#define SECOND_AP_SEQ_OFFSET 4        /*offset from start flag */
++#define SLIDE_BP_SEQ_OFFSET 5 /*offset from start flag */
++#define SEQ_FIELD_SIZE 5
++#else
++#define SLIDE_BP_SEQ_OFFSET 1 /*offset from start flag */
++#define SEQ_FIELD_SIZE 1
++#endif
++
++#define ADDRESS_FIELD_OFFSET (1 + SEQ_FIELD_SIZE)     /*offset from start flag */
++/*For BP UART problem End*/
++
++#ifndef UNUSED_PARAM
++#define UNUSED_PARAM(v) (void)(v)
++#endif
++
++#define TS0710MUX_GPRS1_DLCI 7
++#define TS0710MUX_GPRS2_DLCI 8
++
++#define TS0710MUX_GPRS1_RECV_COUNT_IDX 0
++#define TS0710MUX_GPRS1_SEND_COUNT_IDX 1
++#define TS0710MUX_GPRS2_RECV_COUNT_IDX 2
++#define TS0710MUX_GPRS2_SEND_COUNT_IDX 3
++#define TS0710MUX_COUNT_MAX_IDX        3
++#define TS0710MUX_COUNT_IDX_NUM (TS0710MUX_COUNT_MAX_IDX + 1)
++
++static volatile int mux_data_count[TS0710MUX_COUNT_IDX_NUM] = { 0, 0, 0, 0 };
++static volatile int mux_data_count2[TS0710MUX_COUNT_IDX_NUM] = { 0, 0, 0, 0 };
++static struct semaphore mux_data_count_mutex[TS0710MUX_COUNT_IDX_NUM];
++static volatile __u8 post_recv_count_flag = 0;
++
++/*PROC file*/
++struct proc_dir_entry *gprs_proc_file = NULL;
++ssize_t file_proc_read(struct file *file, char *buf, size_t size,
++                     loff_t * ppos);
++ssize_t file_proc_write(struct file *file, const char *buf, size_t count,
++                      loff_t * ppos);
++struct file_operations file_proc_operations = {
++      read:file_proc_read,
++      write:file_proc_write,
++};
++typedef struct {
++      int recvBytes;
++      int sentBytes;
++} gprs_bytes;
++
++static __u8 tty2dlci[NR_MUXS] =
++    { 1, 2, 3, 4, 5, 6, 7, 8, 6, 7, 8, 9, 10, 11, 12, 13 };
++static __u8 iscmdtty[NR_MUXS] =
++    { 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0 };
++typedef struct {
++      __u8 cmdtty;
++      __u8 datatty;
++} dlci_tty;
++static dlci_tty dlci2tty[] = { {0, 0},        /* DLCI 0 */
++{0, 0},                               /* DLCI 1 */
++{1, 1},                               /* DLCI 2 */
++{2, 2},                               /* DLCI 3 */
++{3, 3},                               /* DLCI 4 */
++{4, 4},                               /* DLCI 5 */
++{5, 8},                               /* DLCI 6 */
++{6, 9},                               /* DLCI 7 */
++{7, 10},                      /* DLCI 8 */
++{11, 11},                     /* DLCI 9 */
++{12, 12},                     /* DLCI 10 */
++{13, 13},                     /* DLCI 11 */
++{14, 14},                     /* DLCI 12 */
++{15, 15}
++};                            /* DLCI 13 */
++
++typedef struct {
++      volatile __u8 buf[TS0710MUX_SEND_BUF_SIZE];
++      volatile __u8 *frame;
++      unsigned long flags;
++      volatile __u16 length;
++      volatile __u8 filled;
++      volatile __u8 dummy;    /* Allignment to 4*n bytes */
++} mux_send_struct;
++
++/* Bit number in flags of mux_send_struct */
++#define BUF_BUSY 0
++
++struct mux_recv_packet_tag {
++      __u8 *data;
++      __u32 length;
++      struct mux_recv_packet_tag *next;
++};
++typedef struct mux_recv_packet_tag mux_recv_packet;
++
++struct mux_recv_struct_tag {
++      __u8 data[TS0710MUX_RECV_BUF_SIZE];
++      __u32 length;
++      __u32 total;
++      mux_recv_packet *mux_packet;
++      struct mux_recv_struct_tag *next;
++      int no_tty;
++      volatile __u8 post_unthrottle;
++};
++typedef struct mux_recv_struct_tag mux_recv_struct;
++
++#define RECV_RUNNING 0
++static unsigned long mux_recv_flags = 0;
++
++static mux_send_struct *mux_send_info[NR_MUXS];
++static volatile __u8 mux_send_info_flags[NR_MUXS];
++static volatile __u8 mux_send_info_idx = NR_MUXS;
++
++static mux_recv_struct *mux_recv_info[NR_MUXS];
++static volatile __u8 mux_recv_info_flags[NR_MUXS];
++static mux_recv_struct *mux_recv_queue = NULL;
++
++static struct tty_driver mux_driver;
++
++#ifdef USB_FOR_MUX
++#define COMM_FOR_MUX_DRIVER usb_for_mux_driver
++#define COMM_FOR_MUX_TTY usb_for_mux_tty
++#define COMM_MUX_DISPATCHER usb_mux_dispatcher
++#define COMM_MUX_SENDER usb_mux_sender
++#else
++#define COMM_FOR_MUX_DRIVER serial_for_mux_driver
++#define COMM_FOR_MUX_TTY serial_for_mux_tty
++#define COMM_MUX_DISPATCHER serial_mux_dispatcher
++#define COMM_MUX_SENDER serial_mux_sender
++
++extern struct list_head *tq_serial_for_mux;
++#endif
++
++extern struct tty_driver *COMM_FOR_MUX_DRIVER;
++extern struct tty_struct *COMM_FOR_MUX_TTY;
++extern void (*COMM_MUX_DISPATCHER) (struct tty_struct * tty);
++extern void (*COMM_MUX_SENDER) (void);
++
++static struct work_struct send_tqueue;
++static struct work_struct receive_tqueue;
++static struct work_struct post_recv_tqueue;
++
++static struct tty_struct *mux_table[NR_MUXS];
++static struct termios *mux_termios[NR_MUXS];
++static struct termios *mux_termios_locked[NR_MUXS];
++static volatile short int mux_tty[NR_MUXS];
++
++#ifdef min
++#undef min
++#define min(a,b)    ( (a)<(b) ? (a):(b) )
++#endif
++
++static int get_count(__u8 idx);
++static int set_count(__u8 idx, int count);
++static int add_count(__u8 idx, int count);
++
++static int send_ua(ts0710_con * ts0710, __u8 dlci);
++static int send_dm(ts0710_con * ts0710, __u8 dlci);
++static int send_sabm(ts0710_con * ts0710, __u8 dlci);
++static int send_disc(ts0710_con * ts0710, __u8 dlci);
++static void queue_uih(mux_send_struct * send_info, __u16 len,
++                    ts0710_con * ts0710, __u8 dlci);
++static int send_pn_msg(ts0710_con * ts0710, __u8 prior, __u32 frame_size,
++                     __u8 credit_flow, __u8 credits, __u8 dlci, __u8 cr);
++static int send_nsc_msg(ts0710_con * ts0710, mcc_type cmd, __u8 cr);
++static void set_uih_hdr(short_frame * uih_pkt, __u8 dlci, __u32 len, __u8 cr);
++
++static __u32 crc_check(__u8 * data, __u32 length, __u8 check_sum);
++static __u8 crc_calc(__u8 * data, __u32 length);
++static void create_crctable(__u8 table[]);
++
++static void mux_sched_send(void);
++
++static __u8 crctable[256];
++
++static ts0710_con ts0710_connection;
++/*
++static rpn_values rpn_val;
++*/
++
++static int valid_dlci(__u8 dlci)
++{
++      if ((dlci < TS0710_MAX_CHN) && (dlci > 0))
++              return 1;
++      else
++              return 0;
++}
++
++#ifdef TS0710DEBUG
++
++#ifdef PRINT_OUTPUT_PRINTK
++#define TS0710_DEBUG(fmt, arg...) printk(KERN_INFO "MUX " __FUNCTION__ ": " fmt "\n" , ## arg)
++#else
++#include "ezxlog.h"
++static __u8 strDebug[256];
++#define TS0710_DEBUG(fmt, arg...) ({ snprintf(strDebug, sizeof(strDebug), "MUX " __FUNCTION__ ": " fmt "\n" , ## arg); \
++                                     /*printk("%s", strDebug)*/ezxlogk("MX", strDebug, strlen(strDebug)); })
++#endif                                /* End #ifdef PRINT_OUTPUT_PRINTK */
++
++#else
++#define TS0710_DEBUG(fmt...)
++#endif                                /* End #ifdef TS0710DEBUG */
++
++#ifdef TS0710LOG
++static unsigned char g_tbuf[TS0710MUX_MAX_BUF_SIZE];
++#ifdef PRINT_OUTPUT_PRINTK
++#define TS0710_LOG(fmt, arg...) printk(fmt, ## arg)
++#define TS0710_PRINTK(fmt, arg...) printk(fmt, ## arg)
++#else
++#include "ezxlog.h"
++static __u8 strLog[256];
++#define TS0710_LOG(fmt, arg...) ({ snprintf(strLog, sizeof(strLog), fmt, ## arg); \
++                                     /*printk("%s", strLog)*/ezxlogk("MX", strLog, strlen(strLog)); })
++#define TS0710_PRINTK(fmt, arg...) ({ printk(fmt, ## arg); \
++                                      TS0710_LOG(fmt, ## arg); })
++#endif                                /* End #ifdef PRINT_OUTPUT_PRINTK */
++
++#else
++#define TS0710_LOG(fmt...)
++#define TS0710_PRINTK(fmt, arg...) printk(fmt, ## arg)
++#endif                                /* End #ifdef TS0710LOG */
++
++#ifdef TS0710DEBUG
++static void TS0710_DEBUGHEX(__u8 * buf, int len)
++{
++      static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE];
++
++      int i;
++      int c;
++
++      if (len <= 0) {
++              return;
++      }
++
++      c = 0;
++      for (i = 0; (i < len) && (c < (TS0710MUX_MAX_BUF_SIZE - 3)); i++) {
++              sprintf(&tbuf[c], "%02x ", buf[i]);
++              c += 3;
++      }
++      tbuf[c] = 0;
++
++#ifdef PRINT_OUTPUT_PRINTK
++      TS0710_DEBUG("%s", tbuf);
++#else
++      /*printk("%s\n", tbuf) */ ezxlogk("MX", tbuf, c);
++#endif
++}
++static void TS0710_DEBUGSTR(__u8 * buf, int len)
++{
++      static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE];
++
++      if (len <= 0) {
++              return;
++      }
++
++      if (len > (TS0710MUX_MAX_BUF_SIZE - 1)) {
++              len = (TS0710MUX_MAX_BUF_SIZE - 1);
++      }
++
++      memcpy(tbuf, buf, len);
++      tbuf[len] = 0;
++
++#ifdef PRINT_OUTPUT_PRINTK
++      /* 0x00 byte in the string pointed by tbuf may truncate the print result */
++      TS0710_DEBUG("%s", tbuf);
++#else
++      /*printk("%s\n", tbuf) */ ezxlogk("MX", tbuf, len);
++#endif
++}
++#else
++#define TS0710_DEBUGHEX(buf, len)
++#define TS0710_DEBUGSTR(buf, len)
++#endif                                /* End #ifdef TS0710DEBUG */
++
++#ifdef TS0710LOG
++static void TS0710_LOGSTR_FRAME(__u8 send, __u8 * data, int len)
++{
++      short_frame *short_pkt;
++      long_frame *long_pkt;
++      __u8 *uih_data_start;
++      __u32 uih_len;
++      __u8 dlci;
++      int pos;
++
++      if (len <= 0) {
++              return;
++      }
++
++      pos = 0;
++      if (send) {
++              pos += sprintf(&g_tbuf[pos], "<");
++              short_pkt = (short_frame *) (data + 1); /*For BP UART problem */
++      } else {
++              /*For BP UART problem */
++              /*pos += sprintf(&g_tbuf[pos], ">"); */
++              pos += sprintf(&g_tbuf[pos], ">%d ", *(data + SLIDE_BP_SEQ_OFFSET));    /*For BP UART problem */
++
++#ifdef TS0710SEQ2
++              pos += sprintf(&g_tbuf[pos], "%02x %02x %02x %02x ", *(data + FIRST_BP_SEQ_OFFSET), *(data + SECOND_BP_SEQ_OFFSET), *(data + FIRST_AP_SEQ_OFFSET), *(data + SECOND_AP_SEQ_OFFSET));     /*For BP UART problem */
++#endif
++
++              short_pkt = (short_frame *) (data + ADDRESS_FIELD_OFFSET);      /*For BP UART problem */
++      }
++
++      /*For BP UART problem */
++      /*short_pkt = (short_frame *)(data + 1); */
++
++      dlci = short_pkt->h.addr.server_chn << 1 | short_pkt->h.addr.d;
++      switch (CLR_PF(short_pkt->h.control)) {
++      case SABM:
++              pos += sprintf(&g_tbuf[pos], "C SABM %d ::", dlci);
++              break;
++      case UA:
++              pos += sprintf(&g_tbuf[pos], "C UA %d ::", dlci);
++              break;
++      case DM:
++              pos += sprintf(&g_tbuf[pos], "C DM %d ::", dlci);
++              break;
++      case DISC:
++              pos += sprintf(&g_tbuf[pos], "C DISC %d ::", dlci);
++              break;
++
++              /*For BP UART problem Begin */
++      case ACK:
++              pos += sprintf(&g_tbuf[pos], "C ACK %d ", short_pkt->data[0]);
++
++#ifdef TS0710SEQ2
++              pos += sprintf(&g_tbuf[pos], "%02x %02x %02x %02x ", short_pkt->data[1], short_pkt->data[2], short_pkt->data[3], short_pkt->data[4]);   /*For BP UART problem */
++#endif
++
++              pos += sprintf(&g_tbuf[pos], "::");
++              break;
++              /*For BP UART problem End */
++
++      case UIH:
++              if (!dlci) {
++                      pos += sprintf(&g_tbuf[pos], "C MCC %d ::", dlci);
++              } else {
++
++                      if ((short_pkt->h.length.ea) == 0) {
++                              long_pkt = (long_frame *) short_pkt;
++                              uih_len = GET_LONG_LENGTH(long_pkt->h.length);
++                              uih_data_start = long_pkt->h.data;
++                      } else {
++                              uih_len = short_pkt->h.length.len;
++                              uih_data_start = short_pkt->data;
++                      }
++                      switch (*uih_data_start) {
++                      case CMDTAG:
++                              pos +=
++                                  sprintf(&g_tbuf[pos], "I %d A %d ::", dlci,
++                                          uih_len);
++                              break;
++                      case DATATAG:
++                      default:
++                              pos +=
++                                  sprintf(&g_tbuf[pos], "I %d D %d ::", dlci,
++                                          uih_len);
++                              break;
++                      }
++
++              }
++              break;
++      default:
++              pos += sprintf(&g_tbuf[pos], "N!!! %d ::", dlci);
++              break;
++      }
++
++      if (len > (sizeof(g_tbuf) - pos - 1)) {
++              len = (sizeof(g_tbuf) - pos - 1);
++      }
++
++      memcpy(&g_tbuf[pos], data, len);
++      pos += len;
++      g_tbuf[pos] = 0;
++
++#ifdef PRINT_OUTPUT_PRINTK
++      /* 0x00 byte in the string pointed by g_tbuf may truncate the print result */
++      TS0710_LOG("%s\n", g_tbuf);
++#else
++      /*printk("%s\n", g_tbuf) */ ezxlogk("MX", g_tbuf, pos);
++#endif
++}
++#else
++#define TS0710_LOGSTR_FRAME(send, data, len)
++#endif
++
++#ifdef TS0710SIG
++#define my_for_each_task(p) \
++        for ((p) = current; ((p) = (p)->next_task) != current; )
++
++static void TS0710_SIG2APLOGD(void)
++{
++      struct task_struct *p;
++      static __u8 sig = 0;
++
++      if (sig) {
++              return;
++      }
++
++      read_lock(&tasklist_lock);
++      my_for_each_task(p) {
++              if (strncmp(p->comm, "aplogd", 6) == 0) {
++                      sig = 1;
++                      if (send_sig(SIGUSR2, p, 1) == 0) {
++                              TS0710_PRINTK
++                                  ("MUX: success to send SIGUSR2 to aplogd!\n");
++                      } else {
++                              TS0710_PRINTK
++                                  ("MUX: failure to send SIGUSR2 to aplogd!\n");
++                      }
++                      break;
++              }
++      }
++      read_unlock(&tasklist_lock);
++
++      if (!sig) {
++              TS0710_PRINTK("MUX: not found aplogd!\n");
++      }
++}
++#else
++#define TS0710_SIG2APLOGD()
++#endif
++
++static int basic_write(ts0710_con * ts0710, __u8 * buf, int len)
++{
++      int res;
++
++      UNUSED_PARAM(ts0710);
++
++      buf[0] = TS0710_BASIC_FLAG;
++      buf[len + 1] = TS0710_BASIC_FLAG;
++
++      if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) {
++              TS0710_PRINTK
++                  ("MUX basic_write: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n");
++
++#ifndef USB_FOR_MUX
++              TS0710_PRINTK
++                  ("MUX basic_write: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n");
++              TS0710_SIG2APLOGD();
++#endif
++
++              return -1;
++      }
++
++      TS0710_LOGSTR_FRAME(1, buf, len + 2);
++      TS0710_DEBUGHEX(buf, len + 2);
++
++      res = COMM_FOR_MUX_DRIVER->write(COMM_FOR_MUX_TTY, buf, len + 2);
++
++      if (res != len + 2) {
++              TS0710_PRINTK("MUX basic_write: Write Error!\n");
++              return -1;
++      }
++
++      return len + 2;
++}
++
++/* Functions for the crc-check and calculation */
++
++#define CRC_VALID 0xcf
++
++static __u32 crc_check(__u8 * data, __u32 length, __u8 check_sum)
++{
++      __u8 fcs = 0xff;
++
++      while (length--) {
++              fcs = crctable[fcs ^ *data++];
++      }
++      fcs = crctable[fcs ^ check_sum];
++      TS0710_DEBUG("fcs : %d\n", fcs);
++      if (fcs == (uint) 0xcf) {       /*CRC_VALID) */
++              TS0710_DEBUG("crc_check: CRC check OK\n");
++              return 0;
++      } else {
++              TS0710_PRINTK("MUX crc_check: CRC check failed\n");
++              return 1;
++      }
++}
++
++/* Calculates the checksum according to the ts0710 specification */
++
++static __u8 crc_calc(__u8 * data, __u32 length)
++{
++      __u8 fcs = 0xff;
++
++      while (length--) {
++              fcs = crctable[fcs ^ *data++];
++      }
++
++      return 0xff - fcs;
++}
++
++/* Calulates a reversed CRC table for the FCS check */
++
++static void create_crctable(__u8 table[])
++{
++      int i, j;
++
++      __u8 data;
++      __u8 code_word = (__u8) 0xe0;
++      __u8 sr = (__u8) 0;
++
++      for (j = 0; j < 256; j++) {
++              data = (__u8) j;
++
++              for (i = 0; i < 8; i++) {
++                      if ((data & 0x1) ^ (sr & 0x1)) {
++                              sr >>= 1;
++                              sr ^= code_word;
++                      } else {
++                              sr >>= 1;
++                      }
++
++                      data >>= 1;
++                      sr &= 0xff;
++              }
++
++              table[j] = sr;
++              sr = 0;
++      }
++}
++
++static void ts0710_reset_dlci(__u8 j)
++{
++      if (j >= TS0710_MAX_CHN)
++              return;
++
++      ts0710_connection.dlci[j].state = DISCONNECTED;
++      ts0710_connection.dlci[j].flow_control = 0;
++      ts0710_connection.dlci[j].mtu = DEF_TS0710_MTU;
++      ts0710_connection.dlci[j].initiated = 0;
++      ts0710_connection.dlci[j].initiator = 0;
++      init_waitqueue_head(&ts0710_connection.dlci[j].open_wait);
++      init_waitqueue_head(&ts0710_connection.dlci[j].close_wait);
++}
++
++static void ts0710_reset_con(void)
++{
++      __u8 j;
++
++      ts0710_connection.initiator = 0;
++      ts0710_connection.mtu = DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE;
++      ts0710_connection.be_testing = 0;
++      ts0710_connection.test_errs = 0;
++      init_waitqueue_head(&ts0710_connection.test_wait);
++
++      for (j = 0; j < TS0710_MAX_CHN; j++) {
++              ts0710_reset_dlci(j);
++      }
++}
++
++static void ts0710_init(void)
++{
++      create_crctable(crctable);
++
++      ts0710_reset_con();
++
++      /* Set the values in the rpn octets */
++/*
++  rpn_val.bit_rate  = 7;
++  rpn_val.data_bits = 3;
++  rpn_val.stop_bit  = 0;
++  rpn_val.parity    = 0;
++  rpn_val.parity_type = 0;
++  rpn_val.res1    = 0;
++  rpn_val.xon_input = 0;
++  rpn_val.xon_output  = 0;
++  rpn_val.rtr_input = 0;
++  rpn_val.rtr_output  = 0;
++  rpn_val.rtc_input = 0;
++  rpn_val.rtc_output  = 0;
++  rpn_val.res2    = 0;
++  rpn_val.xon_u8  = 0x11;
++  rpn_val.xoff_u8 = 0x13;
++        memset(&rpn_val.pm, 0 , 2); *//* Set the mask to zero */
++}
++
++static void ts0710_upon_disconnect(void)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      __u8 j;
++
++      for (j = 0; j < TS0710_MAX_CHN; j++) {
++              ts0710->dlci[j].state = DISCONNECTED;
++              wake_up_interruptible(&ts0710->dlci[j].open_wait);
++              wake_up_interruptible(&ts0710->dlci[j].close_wait);
++      }
++      ts0710->be_testing = 0;
++      wake_up_interruptible(&ts0710->test_wait);
++      ts0710_reset_con();
++}
++
++/* Sending packet functions */
++
++/* Creates a UA packet and puts it at the beginning of the pkt pointer */
++
++static int send_ua(ts0710_con * ts0710, __u8 dlci)
++{
++      __u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE];
++      short_frame *ua;
++
++      TS0710_DEBUG("send_ua: Creating UA packet to DLCI %d\n", dlci);
++
++      ua = (short_frame *) (buf + 1);
++      ua->h.addr.ea = 1;
++      ua->h.addr.cr = ((~(ts0710->initiator)) & 0x1);
++      ua->h.addr.d = (dlci) & 0x1;
++      ua->h.addr.server_chn = (dlci) >> 0x1;
++      ua->h.control = SET_PF(UA);
++      ua->h.length.ea = 1;
++      ua->h.length.len = 0;
++      ua->data[0] = crc_calc((__u8 *) ua, SHORT_CRC_CHECK);
++
++      return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE);
++}
++
++/* Creates a DM packet and puts it at the beginning of the pkt pointer */
++
++static int send_dm(ts0710_con * ts0710, __u8 dlci)
++{
++      __u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE];
++      short_frame *dm;
++
++      TS0710_DEBUG("send_dm: Creating DM packet to DLCI %d\n", dlci);
++
++      dm = (short_frame *) (buf + 1);
++      dm->h.addr.ea = 1;
++      dm->h.addr.cr = ((~(ts0710->initiator)) & 0x1);
++      dm->h.addr.d = dlci & 0x1;
++      dm->h.addr.server_chn = dlci >> 0x1;
++      dm->h.control = SET_PF(DM);
++      dm->h.length.ea = 1;
++      dm->h.length.len = 0;
++      dm->data[0] = crc_calc((__u8 *) dm, SHORT_CRC_CHECK);
++
++      return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE);
++}
++
++static int send_sabm(ts0710_con * ts0710, __u8 dlci)
++{
++      __u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE];
++      short_frame *sabm;
++
++      TS0710_DEBUG("send_sabm: Creating SABM packet to DLCI %d\n", dlci);
++
++      sabm = (short_frame *) (buf + 1);
++      sabm->h.addr.ea = 1;
++      sabm->h.addr.cr = ((ts0710->initiator) & 0x1);
++      sabm->h.addr.d = dlci & 0x1;
++      sabm->h.addr.server_chn = dlci >> 0x1;
++      sabm->h.control = SET_PF(SABM);
++      sabm->h.length.ea = 1;
++      sabm->h.length.len = 0;
++      sabm->data[0] = crc_calc((__u8 *) sabm, SHORT_CRC_CHECK);
++
++      return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE);
++}
++
++static int send_disc(ts0710_con * ts0710, __u8 dlci)
++{
++      __u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE];
++      short_frame *disc;
++
++      TS0710_DEBUG("send_disc: Creating DISC packet to DLCI %d\n", dlci);
++
++      disc = (short_frame *) (buf + 1);
++      disc->h.addr.ea = 1;
++      disc->h.addr.cr = ((ts0710->initiator) & 0x1);
++      disc->h.addr.d = dlci & 0x1;
++      disc->h.addr.server_chn = dlci >> 0x1;
++      disc->h.control = SET_PF(DISC);
++      disc->h.length.ea = 1;
++      disc->h.length.len = 0;
++      disc->data[0] = crc_calc((__u8 *) disc, SHORT_CRC_CHECK);
++
++      return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE);
++}
++
++static void queue_uih(mux_send_struct * send_info, __u16 len,
++                    ts0710_con * ts0710, __u8 dlci)
++{
++      __u32 size;
++
++      TS0710_DEBUG
++          ("queue_uih: Creating UIH packet with %d bytes data to DLCI %d\n",
++           len, dlci);
++
++      if (len > SHORT_PAYLOAD_SIZE) {
++              long_frame *l_pkt;
++
++              size = sizeof(long_frame) + len + FCS_SIZE;
++              l_pkt = (long_frame *) (send_info->frame - sizeof(long_frame));
++              set_uih_hdr((void *)l_pkt, dlci, len, ts0710->initiator);
++              l_pkt->data[len] = crc_calc((__u8 *) l_pkt, LONG_CRC_CHECK);
++              send_info->frame = ((__u8 *) l_pkt) - 1;
++      } else {
++              short_frame *s_pkt;
++
++              size = sizeof(short_frame) + len + FCS_SIZE;
++              s_pkt =
++                  (short_frame *) (send_info->frame - sizeof(short_frame));
++              set_uih_hdr((void *)s_pkt, dlci, len, ts0710->initiator);
++              s_pkt->data[len] = crc_calc((__u8 *) s_pkt, SHORT_CRC_CHECK);
++              send_info->frame = ((__u8 *) s_pkt) - 1;
++      }
++      send_info->length = size;
++}
++
++/* Multiplexer command packets functions */
++
++/* Turns on the ts0710 flow control */
++
++static int ts0710_fcon_msg(ts0710_con * ts0710, __u8 cr)
++{
++      __u8 buf[30];
++      mcc_short_frame *mcc_pkt;
++      short_frame *uih_pkt;
++      __u32 size;
++
++      size = sizeof(short_frame) + sizeof(mcc_short_frame) + FCS_SIZE;
++      uih_pkt = (short_frame *) (buf + 1);
++      set_uih_hdr(uih_pkt, CTRL_CHAN, sizeof(mcc_short_frame),
++                  ts0710->initiator);
++      uih_pkt->data[sizeof(mcc_short_frame)] =
++          crc_calc((__u8 *) uih_pkt, SHORT_CRC_CHECK);
++      mcc_pkt = (mcc_short_frame *) (uih_pkt->data);
++
++      mcc_pkt->h.type.ea = EA;
++      mcc_pkt->h.type.cr = cr;
++      mcc_pkt->h.type.type = FCON;
++      mcc_pkt->h.length.ea = EA;
++      mcc_pkt->h.length.len = 0;
++
++      return basic_write(ts0710, buf, size);
++}
++
++/* Turns off the ts0710 flow control */
++
++static int ts0710_fcoff_msg(ts0710_con * ts0710, __u8 cr)
++{
++      __u8 buf[30];
++      mcc_short_frame *mcc_pkt;
++      short_frame *uih_pkt;
++      __u32 size;
++
++      size = (sizeof(short_frame) + sizeof(mcc_short_frame) + FCS_SIZE);
++      uih_pkt = (short_frame *) (buf + 1);
++      set_uih_hdr(uih_pkt, CTRL_CHAN, sizeof(mcc_short_frame),
++                  ts0710->initiator);
++      uih_pkt->data[sizeof(mcc_short_frame)] =
++          crc_calc((__u8 *) uih_pkt, SHORT_CRC_CHECK);
++      mcc_pkt = (mcc_short_frame *) (uih_pkt->data);
++
++      mcc_pkt->h.type.ea = 1;
++      mcc_pkt->h.type.cr = cr;
++      mcc_pkt->h.type.type = FCOFF;
++      mcc_pkt->h.length.ea = 1;
++      mcc_pkt->h.length.len = 0;
++
++      return basic_write(ts0710, buf, size);
++}
++
++/*
++static int ts0710_rpn_msg(ts0710_con *ts0710, __u8 cr, __u8 dlci, __u8 req)
++{
++  char buf[100];
++  rpn_msg* rpn_pkt;
++  __u32 fsize;
++  __u32 psize;
++
++  fsize = sizeof(rpn_msg);
++
++  if (req) {
++    fsize -= sizeof(rpn_values);
++  }
++
++  psize = (fsize - sizeof(short_frame) - FCS_SIZE);
++
++  rpn_pkt = (rpn_msg *) buf;
++
++  set_uih_hdr((short_frame *) rpn_pkt, CTRL_CHAN, psize, ts0710->initiator);
++
++  rpn_pkt->fcs = crc_calc((__u8*) rpn_pkt, SHORT_CRC_CHECK);
++
++  rpn_pkt->mcc_s_head.type.ea = EA;
++  rpn_pkt->mcc_s_head.type.cr = cr;
++  rpn_pkt->mcc_s_head.type.type = RPN;
++  rpn_pkt->mcc_s_head.length.ea = EA;
++
++  rpn_pkt->dlci.ea = EA;
++  rpn_pkt->dlci.cr = 1;
++  rpn_pkt->dlci.d = dlci & 1;
++  rpn_pkt->dlci.server_chn = (dlci >> 1);
++
++  if (req) {
++    rpn_pkt->mcc_s_head.length.len = 1;
++    rpn_pkt->rpn_val.bit_rate = rpn_pkt->fcs;
++  } else {
++    rpn_pkt->mcc_s_head.length.len = 8;
++    memcpy(&(rpn_pkt->rpn_val), &rpn_val, sizeof(rpn_values));
++  }
++  return basic_write(ts0710, buf, fsize);
++}
++*/
++/*
++static int ts0710_rls_msg(ts0710_con *ts0710, __u8 cr, __u8 dlci, __u8 err_code)
++{
++  char buf[100];
++  rls_msg *rls_pkt;
++  __u32 fsize;
++  __u32 psize;
++
++  fsize = sizeof(rls_msg);
++  psize = fsize - sizeof(short_frame) - FCS_SIZE;
++  rls_pkt = (rls_msg *) buf;
++
++  set_uih_hdr((short_frame *) rls_pkt, CTRL_CHAN, psize, ts0710->initiator);
++  rls_pkt->fcs = crc_calc((__u8*) rls_pkt, SHORT_CRC_CHECK);
++
++  rls_pkt->mcc_s_head.type.ea = EA;
++  rls_pkt->mcc_s_head.type.cr = cr;
++  rls_pkt->mcc_s_head.type.type = RLS;
++  rls_pkt->mcc_s_head.length.ea = EA;
++  rls_pkt->mcc_s_head.length.len = 2;
++
++  rls_pkt->dlci.ea = EA;
++  rls_pkt->dlci.cr = 1;
++  rls_pkt->dlci.d = dlci & 1;
++  rls_pkt->dlci.server_chn = dlci >> 1;
++  rls_pkt->error = err_code;
++  rls_pkt->res = 0;
++
++  return basic_write(ts0710, buf, fsize);
++}
++*/
++
++/* Sends an PN-messages and sets the not negotiable parameters to their
++   default values in ts0710 */
++
++static int send_pn_msg(ts0710_con * ts0710, __u8 prior, __u32 frame_size,
++                     __u8 credit_flow, __u8 credits, __u8 dlci, __u8 cr)
++{
++      __u8 buf[30];
++      pn_msg *pn_pkt;
++      __u32 size;
++      TS0710_DEBUG
++          ("send_pn_msg: DLCI 0x%02x, prior:0x%02x, frame_size:%d, credit_flow:%x, credits:%d, cr:%x\n",
++           dlci, prior, frame_size, credit_flow, credits, cr);
++
++      size = sizeof(pn_msg);
++      pn_pkt = (pn_msg *) (buf + 1);
++
++      set_uih_hdr((void *)pn_pkt, CTRL_CHAN,
++                  size - (sizeof(short_frame) + FCS_SIZE), ts0710->initiator);
++      pn_pkt->fcs = crc_calc((__u8 *) pn_pkt, SHORT_CRC_CHECK);
++
++      pn_pkt->mcc_s_head.type.ea = 1;
++      pn_pkt->mcc_s_head.type.cr = cr;
++      pn_pkt->mcc_s_head.type.type = PN;
++      pn_pkt->mcc_s_head.length.ea = 1;
++      pn_pkt->mcc_s_head.length.len = 8;
++
++      pn_pkt->res1 = 0;
++      pn_pkt->res2 = 0;
++      pn_pkt->dlci = dlci;
++      pn_pkt->frame_type = 0;
++      pn_pkt->credit_flow = credit_flow;
++      pn_pkt->prior = prior;
++      pn_pkt->ack_timer = 0;
++      SET_PN_MSG_FRAME_SIZE(pn_pkt, frame_size);
++      pn_pkt->credits = credits;
++      pn_pkt->max_nbrof_retrans = 0;
++
++      return basic_write(ts0710, buf, size);
++}
++
++/* Send a Not supported command - command, which needs 3 bytes */
++
++static int send_nsc_msg(ts0710_con * ts0710, mcc_type cmd, __u8 cr)
++{
++      __u8 buf[30];
++      nsc_msg *nsc_pkt;
++      __u32 size;
++
++      size = sizeof(nsc_msg);
++      nsc_pkt = (nsc_msg *) (buf + 1);
++
++      set_uih_hdr((void *)nsc_pkt, CTRL_CHAN,
++                  sizeof(nsc_msg) - sizeof(short_frame) - FCS_SIZE,
++                  ts0710->initiator);
++
++      nsc_pkt->fcs = crc_calc((__u8 *) nsc_pkt, SHORT_CRC_CHECK);
++
++      nsc_pkt->mcc_s_head.type.ea = 1;
++      nsc_pkt->mcc_s_head.type.cr = cr;
++      nsc_pkt->mcc_s_head.type.type = NSC;
++      nsc_pkt->mcc_s_head.length.ea = 1;
++      nsc_pkt->mcc_s_head.length.len = 1;
++
++      nsc_pkt->command_type.ea = 1;
++      nsc_pkt->command_type.cr = cmd.cr;
++      nsc_pkt->command_type.type = cmd.type;
++
++      return basic_write(ts0710, buf, size);
++}
++
++static int ts0710_msc_msg(ts0710_con * ts0710, __u8 value, __u8 cr, __u8 dlci)
++{
++      __u8 buf[30];
++      msc_msg *msc_pkt;
++      __u32 size;
++
++      size = sizeof(msc_msg);
++      msc_pkt = (msc_msg *) (buf + 1);
++
++      set_uih_hdr((void *)msc_pkt, CTRL_CHAN,
++                  sizeof(msc_msg) - sizeof(short_frame) - FCS_SIZE,
++                  ts0710->initiator);
++
++      msc_pkt->fcs = crc_calc((__u8 *) msc_pkt, SHORT_CRC_CHECK);
++
++      msc_pkt->mcc_s_head.type.ea = 1;
++      msc_pkt->mcc_s_head.type.cr = cr;
++      msc_pkt->mcc_s_head.type.type = MSC;
++      msc_pkt->mcc_s_head.length.ea = 1;
++      msc_pkt->mcc_s_head.length.len = 2;
++
++      msc_pkt->dlci.ea = 1;
++      msc_pkt->dlci.cr = 1;
++      msc_pkt->dlci.d = dlci & 1;
++      msc_pkt->dlci.server_chn = (dlci >> 1) & 0x1f;
++
++      msc_pkt->v24_sigs = value;
++
++      return basic_write(ts0710, buf, size);
++}
++
++static int ts0710_test_msg(ts0710_con * ts0710, __u8 * test_pattern, __u32 len,
++                         __u8 cr, __u8 * f_buf /*Frame buf */ )
++{
++      __u32 size;
++
++      if (len > SHORT_PAYLOAD_SIZE) {
++              long_frame *uih_pkt;
++              mcc_long_frame *mcc_pkt;
++
++              size =
++                  (sizeof(long_frame) + sizeof(mcc_long_frame) + len +
++                   FCS_SIZE);
++              uih_pkt = (long_frame *) (f_buf + 1);
++
++              set_uih_hdr((short_frame *) uih_pkt, CTRL_CHAN, len +
++                          sizeof(mcc_long_frame), ts0710->initiator);
++              uih_pkt->data[GET_LONG_LENGTH(uih_pkt->h.length)] =
++                  crc_calc((__u8 *) uih_pkt, LONG_CRC_CHECK);
++              mcc_pkt = (mcc_long_frame *) uih_pkt->data;
++
++              mcc_pkt->h.type.ea = EA;
++              /* cr tells whether it is a commmand (1) or a response (0) */
++              mcc_pkt->h.type.cr = cr;
++              mcc_pkt->h.type.type = TEST;
++              SET_LONG_LENGTH(mcc_pkt->h.length, len);
++              memcpy(mcc_pkt->value, test_pattern, len);
++      } else if (len > (SHORT_PAYLOAD_SIZE - sizeof(mcc_short_frame))) {
++              long_frame *uih_pkt;
++              mcc_short_frame *mcc_pkt;
++
++              /* Create long uih packet and short mcc packet */
++              size =
++                  (sizeof(long_frame) + sizeof(mcc_short_frame) + len +
++                   FCS_SIZE);
++              uih_pkt = (long_frame *) (f_buf + 1);
++
++              set_uih_hdr((short_frame *) uih_pkt, CTRL_CHAN,
++                          len + sizeof(mcc_short_frame), ts0710->initiator);
++              uih_pkt->data[GET_LONG_LENGTH(uih_pkt->h.length)] =
++                  crc_calc((__u8 *) uih_pkt, LONG_CRC_CHECK);
++              mcc_pkt = (mcc_short_frame *) uih_pkt->data;
++
++              mcc_pkt->h.type.ea = EA;
++              mcc_pkt->h.type.cr = cr;
++              mcc_pkt->h.type.type = TEST;
++              mcc_pkt->h.length.ea = EA;
++              mcc_pkt->h.length.len = len;
++              memcpy(mcc_pkt->value, test_pattern, len);
++      } else {
++              short_frame *uih_pkt;
++              mcc_short_frame *mcc_pkt;
++
++              size =
++                  (sizeof(short_frame) + sizeof(mcc_short_frame) + len +
++                   FCS_SIZE);
++              uih_pkt = (short_frame *) (f_buf + 1);
++
++              set_uih_hdr((void *)uih_pkt, CTRL_CHAN, len
++                          + sizeof(mcc_short_frame), ts0710->initiator);
++              uih_pkt->data[uih_pkt->h.length.len] =
++                  crc_calc((__u8 *) uih_pkt, SHORT_CRC_CHECK);
++              mcc_pkt = (mcc_short_frame *) uih_pkt->data;
++
++              mcc_pkt->h.type.ea = EA;
++              mcc_pkt->h.type.cr = cr;
++              mcc_pkt->h.type.type = TEST;
++              mcc_pkt->h.length.ea = EA;
++              mcc_pkt->h.length.len = len;
++              memcpy(mcc_pkt->value, test_pattern, len);
++
++      }
++      return basic_write(ts0710, f_buf, size);
++}
++
++static void set_uih_hdr(short_frame * uih_pkt, __u8 dlci, __u32 len, __u8 cr)
++{
++      uih_pkt->h.addr.ea = 1;
++      uih_pkt->h.addr.cr = cr;
++      uih_pkt->h.addr.d = dlci & 0x1;
++      uih_pkt->h.addr.server_chn = dlci >> 1;
++      uih_pkt->h.control = CLR_PF(UIH);
++
++      if (len > SHORT_PAYLOAD_SIZE) {
++              SET_LONG_LENGTH(((long_frame *) uih_pkt)->h.length, len);
++      } else {
++              uih_pkt->h.length.ea = 1;
++              uih_pkt->h.length.len = len;
++      }
++}
++
++/* Parses a multiplexer control channel packet */
++
++void process_mcc(__u8 * data, __u32 len, ts0710_con * ts0710, int longpkt)
++{
++      __u8 *tbuf = NULL;
++      mcc_short_frame *mcc_short_pkt;
++      int j;
++
++      if (longpkt) {
++              mcc_short_pkt =
++                  (mcc_short_frame *) (((long_frame *) data)->data);
++      } else {
++              mcc_short_pkt =
++                  (mcc_short_frame *) (((short_frame *) data)->data);
++      }
++
++      switch (mcc_short_pkt->h.type.type) {
++      case TEST:
++              if (mcc_short_pkt->h.type.cr == MCC_RSP) {
++                      TS0710_DEBUG("Received test command response\n");
++
++                      if (ts0710->be_testing) {
++                              if ((mcc_short_pkt->h.length.ea) == 0) {
++                                      mcc_long_frame *mcc_long_pkt;
++                                      mcc_long_pkt =
++                                          (mcc_long_frame *) mcc_short_pkt;
++                                      if (GET_LONG_LENGTH
++                                          (mcc_long_pkt->h.length) !=
++                                          TEST_PATTERN_SIZE) {
++                                              ts0710->test_errs =
++                                                  TEST_PATTERN_SIZE;
++                                              TS0710_DEBUG
++                                                  ("Err: received test pattern is %d bytes long, not expected %d\n",
++                                                   GET_LONG_LENGTH
++                                                   (mcc_long_pkt->h.length),
++                                                   TEST_PATTERN_SIZE);
++                                      } else {
++                                              ts0710->test_errs = 0;
++                                              for (j = 0;
++                                                   j < TEST_PATTERN_SIZE;
++                                                   j++) {
++                                                      if (mcc_long_pkt->
++                                                          value[j] !=
++                                                          (j & 0xFF)) {
++                                                              (ts0710->
++                                                               test_errs)++;
++                                                      }
++                                              }
++                                      }
++
++                              } else {
++
++#if TEST_PATTERN_SIZE < 128
++                                      if (mcc_short_pkt->h.length.len !=
++                                          TEST_PATTERN_SIZE) {
++#endif
++
++                                              ts0710->test_errs =
++                                                  TEST_PATTERN_SIZE;
++                                              TS0710_DEBUG
++                                                  ("Err: received test pattern is %d bytes long, not expected %d\n",
++                                                   mcc_short_pkt->h.length.
++                                                   len, TEST_PATTERN_SIZE);
++
++#if TEST_PATTERN_SIZE < 128
++                                      } else {
++                                              ts0710->test_errs = 0;
++                                              for (j = 0;
++                                                   j < TEST_PATTERN_SIZE;
++                                                   j++) {
++                                                      if (mcc_short_pkt->
++                                                          value[j] !=
++                                                          (j & 0xFF)) {
++                                                              (ts0710->
++                                                               test_errs)++;
++                                                      }
++                                              }
++                                      }
++#endif
++
++                              }
++
++                              ts0710->be_testing = 0; /* Clear the flag */
++                              wake_up_interruptible(&ts0710->test_wait);
++                      } else {
++                              TS0710_DEBUG
++                                  ("Err: shouldn't or late to get test cmd response\n");
++                      }
++              } else {
++                      tbuf = (__u8 *) kmalloc(len + 32, GFP_ATOMIC);
++                      if (!tbuf) {
++                              break;
++                      }
++
++                      if ((mcc_short_pkt->h.length.ea) == 0) {
++                              mcc_long_frame *mcc_long_pkt;
++                              mcc_long_pkt = (mcc_long_frame *) mcc_short_pkt;
++                              ts0710_test_msg(ts0710, mcc_long_pkt->value,
++                                              GET_LONG_LENGTH(mcc_long_pkt->h.
++                                                              length),
++                                              MCC_RSP, tbuf);
++                      } else {
++                              ts0710_test_msg(ts0710, mcc_short_pkt->value,
++                                              mcc_short_pkt->h.length.len,
++                                              MCC_RSP, tbuf);
++                      }
++
++                      kfree(tbuf);
++              }
++              break;
++
++      case FCON:              /*Flow control on command */
++              TS0710_PRINTK
++                  ("MUX Received Flow control(all channels) on command\n");
++              if (mcc_short_pkt->h.type.cr == MCC_CMD) {
++                      ts0710->dlci[0].state = CONNECTED;
++                      ts0710_fcon_msg(ts0710, MCC_RSP);
++                      mux_sched_send();
++              }
++              break;
++
++      case FCOFF:             /*Flow control off command */
++              TS0710_PRINTK
++                  ("MUX Received Flow control(all channels) off command\n");
++              if (mcc_short_pkt->h.type.cr == MCC_CMD) {
++                      for (j = 0; j < TS0710_MAX_CHN; j++) {
++                              ts0710->dlci[j].state = FLOW_STOPPED;
++                      }
++                      ts0710_fcoff_msg(ts0710, MCC_RSP);
++              }
++              break;
++
++      case MSC:               /*Modem status command */
++              {
++                      __u8 dlci;
++                      __u8 v24_sigs;
++
++                      dlci = (mcc_short_pkt->value[0]) >> 2;
++                      v24_sigs = mcc_short_pkt->value[1];
++
++                      if ((ts0710->dlci[dlci].state != CONNECTED)
++                          && (ts0710->dlci[dlci].state != FLOW_STOPPED)) {
++                              send_dm(ts0710, dlci);
++                              break;
++                      }
++                      if (mcc_short_pkt->h.type.cr == MCC_CMD) {
++                              TS0710_DEBUG("Received Modem status command\n");
++                              if (v24_sigs & 2) {
++                                      if (ts0710->dlci[dlci].state ==
++                                          CONNECTED) {
++                                              TS0710_LOG
++                                                  ("MUX Received Flow off on dlci %d\n",
++                                                   dlci);
++                                              ts0710->dlci[dlci].state =
++                                                  FLOW_STOPPED;
++                                      }
++                              } else {
++                                      if (ts0710->dlci[dlci].state ==
++                                          FLOW_STOPPED) {
++                                              ts0710->dlci[dlci].state =
++                                                  CONNECTED;
++                                              TS0710_LOG
++                                                  ("MUX Received Flow on on dlci %d\n",
++                                                   dlci);
++                                              mux_sched_send();
++                                      }
++                              }
++
++                              ts0710_msc_msg(ts0710, v24_sigs, MCC_RSP, dlci);
++/*
++          if (!(ts0710->dlci[dlci].initiated) && !(ts0710->dlci[dlci].initiator)) {
++            ts0710_msc_msg(ts0710, EA | RTR | RTC | DV, MCC_CMD, dlci);
++            ts0710->dlci[dlci].initiated = 1;
++          }
++*/
++                      } else {
++                              TS0710_DEBUG
++                                  ("Received Modem status response\n");
++
++                              if (v24_sigs & 2) {
++                                      TS0710_DEBUG("Flow stop accepted\n");
++                              }
++                      }
++                      break;
++              }
++
++              /*    case RPN:  *//*Remote port negotiation command */
++
++/*      {
++        __u8 dlci;
++
++        dlci = (mcc_short_pkt->value[0]) >> 2;
++
++        if (mcc_short_pkt->h.type.cr == MCC_CMD) {
++          if (mcc_short_pkt->h.length.len == 1) {
++            TS0710_DEBUG("Received Remote port negotiation command\n");
++            ts0710_rpn_msg(ts0710, MCC_RSP, dlci, 0);
++          } else {
++*/
++              /* Accept the other sides settings (accept all for now) */
++/*            TS0710_DEBUG("Received Remote port negotiation respons\n");
++            memcpy(&rpn_val, &mcc_short_pkt->value[1], 8);
++            ts0710_rpn_msg(ts0710, MCC_RSP, dlci, 0);
++*/
++              /* Zero the parametermask after response */
++/*            memset(&rpn_val.pm, 0, 2);
++          }
++        }
++        break;
++      }
++*/
++/*
++                  case RLS: *//*Remote line status */
++/*      {
++        __u8 dlci;
++        __u8 err_code;
++
++        TS0710_DEBUG("Received Remote line status\n");
++        if (mcc_short_pkt->h.type.cr == MCC_CMD) {
++          dlci = mcc_short_pkt->value[0] >> 2;
++          err_code = mcc_short_pkt->value[1];
++
++          ts0710_rls_msg(ts0710, MCC_RSP, dlci, err_code);
++        }
++        break;
++      }
++*/
++      case PN:                /*DLC parameter negotiation */
++              {
++                      __u8 dlci;
++                      __u16 frame_size;
++                      pn_msg *pn_pkt;
++
++                      pn_pkt = (pn_msg *) data;
++                      dlci = pn_pkt->dlci;
++                      frame_size = GET_PN_MSG_FRAME_SIZE(pn_pkt);
++                      TS0710_DEBUG
++                          ("Received DLC parameter negotiation, PN\n");
++                      if (pn_pkt->mcc_s_head.type.cr == MCC_CMD) {
++                              TS0710_DEBUG("received PN command with:\n");
++                              TS0710_DEBUG("Frame size:%d\n", frame_size);
++
++                              frame_size =
++                                  min(frame_size, ts0710->dlci[dlci].mtu);
++                              send_pn_msg(ts0710, pn_pkt->prior, frame_size,
++                                          0, 0, dlci, MCC_RSP);
++                              ts0710->dlci[dlci].mtu = frame_size;
++                              TS0710_DEBUG("process_mcc : mtu set to %d\n",
++                                           ts0710->dlci[dlci].mtu);
++                      } else {
++                              TS0710_DEBUG("received PN response with:\n");
++                              TS0710_DEBUG("Frame size:%d\n", frame_size);
++
++                              frame_size =
++                                  min(frame_size, ts0710->dlci[dlci].mtu);
++                              ts0710->dlci[dlci].mtu = frame_size;
++
++                              TS0710_DEBUG
++                                  ("process_mcc : mtu set on dlci:%d to %d\n",
++                                   dlci, ts0710->dlci[dlci].mtu);
++
++                              if (ts0710->dlci[dlci].state == NEGOTIATING) {
++                                      ts0710->dlci[dlci].state = CONNECTING;
++                                      wake_up_interruptible(&ts0710->
++                                                            dlci[dlci].
++                                                            open_wait);
++                              }
++                      }
++                      break;
++              }
++
++      case NSC:               /*Non supported command resonse */
++              TS0710_LOG("MUX Received Non supported command response\n");
++              break;
++
++      default:                /*Non supported command received */
++              TS0710_LOG("MUX Received a non supported command\n");
++              send_nsc_msg(ts0710, mcc_short_pkt->h.type, MCC_RSP);
++              break;
++      }
++}
++
++static mux_recv_packet *get_mux_recv_packet(__u32 size)
++{
++      mux_recv_packet *recv_packet;
++
++      TS0710_DEBUG("Enter into get_mux_recv_packet");
++
++      recv_packet =
++          (mux_recv_packet *) kmalloc(sizeof(mux_recv_packet), GFP_ATOMIC);
++      if (!recv_packet) {
++              return 0;
++      }
++
++      recv_packet->data = (__u8 *) kmalloc(size, GFP_ATOMIC);
++      if (!(recv_packet->data)) {
++              kfree(recv_packet);
++              return 0;
++      }
++      recv_packet->length = 0;
++      recv_packet->next = 0;
++      return recv_packet;
++}
++
++static void free_mux_recv_packet(mux_recv_packet * recv_packet)
++{
++      TS0710_DEBUG("Enter into free_mux_recv_packet");
++
++      if (!recv_packet) {
++              return;
++      }
++
++      if (recv_packet->data) {
++              kfree(recv_packet->data);
++      }
++      kfree(recv_packet);
++}
++
++static void free_mux_recv_struct(mux_recv_struct * recv_info)
++{
++      mux_recv_packet *recv_packet1, *recv_packet2;
++
++      if (!recv_info) {
++              return;
++      }
++
++      recv_packet1 = recv_info->mux_packet;
++      while (recv_packet1) {
++              recv_packet2 = recv_packet1->next;
++              free_mux_recv_packet(recv_packet1);
++              recv_packet1 = recv_packet2;
++      }
++
++      kfree(recv_info);
++}
++
++static inline void add_post_recv_queue(mux_recv_struct ** head,
++                                     mux_recv_struct * new_item)
++{
++      new_item->next = *head;
++      *head = new_item;
++}
++
++static void ts0710_flow_on(__u8 dlci, ts0710_con * ts0710)
++{
++      int i;
++      __u8 cmdtty;
++      __u8 datatty;
++      struct tty_struct *tty;
++      mux_recv_struct *recv_info;
++
++      if ((ts0710->dlci[0].state != CONNECTED)
++          && (ts0710->dlci[0].state != FLOW_STOPPED)) {
++              return;
++      } else if ((ts0710->dlci[dlci].state != CONNECTED)
++                 && (ts0710->dlci[dlci].state != FLOW_STOPPED)) {
++              return;
++      }
++
++      if (!(ts0710->dlci[dlci].flow_control)) {
++              return;
++      }
++
++      cmdtty = dlci2tty[dlci].cmdtty;
++      datatty = dlci2tty[dlci].datatty;
++
++      if (cmdtty != datatty) {
++              /* Check AT cmd tty */
++              tty = mux_table[cmdtty];
++              if (mux_tty[cmdtty] && tty) {
++                      if (test_bit(TTY_THROTTLED, &tty->flags)) {
++                              return;
++                      }
++              }
++              recv_info = mux_recv_info[cmdtty];
++              if (mux_recv_info_flags[cmdtty] && recv_info) {
++                      if (recv_info->total) {
++                              return;
++                      }
++              }
++
++              /* Check data tty */
++              tty = mux_table[datatty];
++              if (mux_tty[datatty] && tty) {
++                      if (test_bit(TTY_THROTTLED, &tty->flags)) {
++                              return;
++                      }
++              }
++              recv_info = mux_recv_info[datatty];
++              if (mux_recv_info_flags[datatty] && recv_info) {
++                      if (recv_info->total) {
++                              return;
++                      }
++              }
++      }
++
++      for (i = 0; i < 3; i++) {
++              if (ts0710_msc_msg(ts0710, EA | RTC | RTR | DV, MCC_CMD, dlci) <
++                  0) {
++                      continue;
++              } else {
++                      TS0710_LOG("MUX send Flow on on dlci %d\n", dlci);
++                      ts0710->dlci[dlci].flow_control = 0;
++                      break;
++              }
++      }
++}
++
++static void ts0710_flow_off(struct tty_struct *tty, __u8 dlci,
++                          ts0710_con * ts0710)
++{
++      int i;
++
++      if (test_and_set_bit(TTY_THROTTLED, &tty->flags)) {
++              return;
++      }
++
++      if ((ts0710->dlci[0].state != CONNECTED)
++          && (ts0710->dlci[0].state != FLOW_STOPPED)) {
++              return;
++      } else if ((ts0710->dlci[dlci].state != CONNECTED)
++                 && (ts0710->dlci[dlci].state != FLOW_STOPPED)) {
++              return;
++      }
++
++      if (ts0710->dlci[dlci].flow_control) {
++              return;
++      }
++
++      for (i = 0; i < 3; i++) {
++              if (ts0710_msc_msg
++                  (ts0710, EA | FC | RTC | RTR | DV, MCC_CMD, dlci) < 0) {
++                      continue;
++              } else {
++                      TS0710_LOG("MUX send Flow off on dlci %d\n", dlci);
++                      ts0710->dlci[dlci].flow_control = 1;
++                      break;
++              }
++      }
++}
++
++int ts0710_recv_data(ts0710_con * ts0710, char *data, int len)
++{
++      short_frame *short_pkt;
++      long_frame *long_pkt;
++      __u8 *uih_data_start;
++      __u32 uih_len;
++      __u8 dlci;
++      __u8 be_connecting;
++#ifdef TS0710DEBUG
++      unsigned long t;
++#endif
++
++      short_pkt = (short_frame *) data;
++
++      dlci = short_pkt->h.addr.server_chn << 1 | short_pkt->h.addr.d;
++      switch (CLR_PF(short_pkt->h.control)) {
++      case SABM:
++              TS0710_DEBUG("SABM-packet received\n");
++
++/*For BP UART problem
++      if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) )
++        break;
++*/
++
++              if (!dlci) {
++                      TS0710_DEBUG("server channel == 0\n");
++                      ts0710->dlci[0].state = CONNECTED;
++
++                      TS0710_DEBUG("sending back UA - control channel\n");
++                      send_ua(ts0710, dlci);
++                      wake_up_interruptible(&ts0710->dlci[0].open_wait);
++
++              } else if (valid_dlci(dlci)) {
++
++                      TS0710_DEBUG("Incomming connect on channel %d\n", dlci);
++
++                      TS0710_DEBUG("sending UA, dlci %d\n", dlci);
++                      send_ua(ts0710, dlci);
++
++                      ts0710->dlci[dlci].state = CONNECTED;
++                      wake_up_interruptible(&ts0710->dlci[dlci].open_wait);
++
++              } else {
++                      TS0710_DEBUG("invalid dlci %d, sending DM\n", dlci);
++                      send_dm(ts0710, dlci);
++              }
++
++              break;
++
++      case UA:
++              TS0710_DEBUG("UA packet received\n");
++
++/*For BP UART problem
++      if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) )
++        break;
++*/
++
++              if (!dlci) {
++                      TS0710_DEBUG("server channel == 0\n");
++
++                      if (ts0710->dlci[0].state == CONNECTING) {
++                              ts0710->dlci[0].state = CONNECTED;
++                              wake_up_interruptible(&ts0710->dlci[0].
++                                                    open_wait);
++                      } else if (ts0710->dlci[0].state == DISCONNECTING) {
++                              ts0710_upon_disconnect();
++                      } else {
++                              TS0710_DEBUG
++                                  (" Something wrong receiving UA packet\n");
++                      }
++              } else if (valid_dlci(dlci)) {
++                      TS0710_DEBUG("Incomming UA on channel %d\n", dlci);
++
++                      if (ts0710->dlci[dlci].state == CONNECTING) {
++                              ts0710->dlci[dlci].state = CONNECTED;
++                              wake_up_interruptible(&ts0710->dlci[dlci].
++                                                    open_wait);
++                      } else if (ts0710->dlci[dlci].state == DISCONNECTING) {
++                              ts0710->dlci[dlci].state = DISCONNECTED;
++                              wake_up_interruptible(&ts0710->dlci[dlci].
++                                                    open_wait);
++                              wake_up_interruptible(&ts0710->dlci[dlci].
++                                                    close_wait);
++                              ts0710_reset_dlci(dlci);
++                      } else {
++                              TS0710_DEBUG
++                                  (" Something wrong receiving UA packet\n");
++                      }
++              } else {
++                      TS0710_DEBUG("invalid dlci %d\n", dlci);
++              }
++
++              break;
++
++      case DM:
++              TS0710_DEBUG("DM packet received\n");
++
++/*For BP UART problem
++      if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) )
++        break;
++*/
++
++              if (!dlci) {
++                      TS0710_DEBUG("server channel == 0\n");
++
++                      if (ts0710->dlci[0].state == CONNECTING) {
++                              be_connecting = 1;
++                      } else {
++                              be_connecting = 0;
++                      }
++                      ts0710_upon_disconnect();
++                      if (be_connecting) {
++                              ts0710->dlci[0].state = REJECTED;
++                      }
++              } else if (valid_dlci(dlci)) {
++                      TS0710_DEBUG("Incomming DM on channel %d\n", dlci);
++
++                      if (ts0710->dlci[dlci].state == CONNECTING) {
++                              ts0710->dlci[dlci].state = REJECTED;
++                      } else {
++                              ts0710->dlci[dlci].state = DISCONNECTED;
++                      }
++                      wake_up_interruptible(&ts0710->dlci[dlci].open_wait);
++                      wake_up_interruptible(&ts0710->dlci[dlci].close_wait);
++                      ts0710_reset_dlci(dlci);
++              } else {
++                      TS0710_DEBUG("invalid dlci %d\n", dlci);
++              }
++
++              break;
++
++      case DISC:
++              TS0710_DEBUG("DISC packet received\n");
++
++/*For BP UART problem
++      if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) )
++        break;
++*/
++
++              if (!dlci) {
++                      TS0710_DEBUG("server channel == 0\n");
++
++                      send_ua(ts0710, dlci);
++                      TS0710_DEBUG("DISC, sending back UA\n");
++
++                      ts0710_upon_disconnect();
++              } else if (valid_dlci(dlci)) {
++                      TS0710_DEBUG("Incomming DISC on channel %d\n", dlci);
++
++                      send_ua(ts0710, dlci);
++                      TS0710_DEBUG("DISC, sending back UA\n");
++
++                      ts0710->dlci[dlci].state = DISCONNECTED;
++                      wake_up_interruptible(&ts0710->dlci[dlci].open_wait);
++                      wake_up_interruptible(&ts0710->dlci[dlci].close_wait);
++                      ts0710_reset_dlci(dlci);
++              } else {
++                      TS0710_DEBUG("invalid dlci %d\n", dlci);
++              }
++
++              break;
++
++      case UIH:
++              TS0710_DEBUG("UIH packet received\n");
++
++              if ((dlci >= TS0710_MAX_CHN)) {
++                      TS0710_DEBUG("invalid dlci %d\n", dlci);
++                      send_dm(ts0710, dlci);
++                      break;
++              }
++
++              if (GET_PF(short_pkt->h.control)) {
++                      TS0710_LOG
++                          ("MUX Error %s: UIH packet with P/F set, discard it!\n",
++                           __FUNCTION__);
++                      break;
++              }
++
++              if ((ts0710->dlci[dlci].state != CONNECTED)
++                  && (ts0710->dlci[dlci].state != FLOW_STOPPED)) {
++                      TS0710_LOG
++                          ("MUX Error %s: DLCI %d not connected, discard it!\n",
++                           __FUNCTION__, dlci);
++                      send_dm(ts0710, dlci);
++                      break;
++              }
++
++              if ((short_pkt->h.length.ea) == 0) {
++                      TS0710_DEBUG("Long UIH packet received\n");
++                      long_pkt = (long_frame *) data;
++                      uih_len = GET_LONG_LENGTH(long_pkt->h.length);
++                      uih_data_start = long_pkt->h.data;
++                      TS0710_DEBUG("long packet length %d\n", uih_len);
++
++/*For BP UART problem
++        if (crc_check(data, LONG_CRC_CHECK, *(uih_data_start + uih_len)))
++          break;
++*/
++              } else {
++                      TS0710_DEBUG("Short UIH pkt received\n");
++                      uih_len = short_pkt->h.length.len;
++                      uih_data_start = short_pkt->data;
++
++/*For BP UART problem
++        if (crc_check(data, SHORT_CRC_CHECK, *(uih_data_start + uih_len)))
++          break;
++*/
++              }
++
++              if (dlci == 0) {
++                      TS0710_DEBUG("UIH on serv_channel 0\n");
++                      process_mcc(data, len, ts0710,
++                                  !(short_pkt->h.length.ea));
++              } else if (valid_dlci(dlci)) {
++                      /* do tty dispatch */
++                      __u8 tag;
++                      __u8 tty_idx;
++                      struct tty_struct *tty;
++                      __u8 queue_data;
++                      __u8 post_recv;
++                      __u8 flow_control;
++                      mux_recv_struct *recv_info;
++                      int recv_room;
++                      mux_recv_packet *recv_packet, *recv_packet2;
++
++                      TS0710_DEBUG("UIH on channel %d\n", dlci);
++
++                      if (uih_len > ts0710->dlci[dlci].mtu) {
++                              TS0710_PRINTK
++                                  ("MUX Error:  DLCI:%d, uih_len:%d is bigger than mtu:%d, discard data!\n",
++                                   dlci, uih_len, ts0710->dlci[dlci].mtu);
++                              break;
++                      }
++
++                      tag = *uih_data_start;
++                      uih_data_start++;
++                      uih_len--;
++
++                      if (!uih_len) {
++                              break;
++                      }
++
++                      switch (tag) {
++                      case CMDTAG:
++                              tty_idx = dlci2tty[dlci].cmdtty;
++                              TS0710_DEBUG("CMDTAG on DLCI:%d, /dev/mux%d\n",
++                                           dlci, tty_idx);
++                              TS0710_DEBUGSTR(uih_data_start, uih_len);
++                              if (!(iscmdtty[tty_idx])) {
++                                      TS0710_PRINTK
++                                          ("MUX Error: %s: Wrong CMDTAG on DLCI:%d, /dev/mux%d\n",
++                                           __FUNCTION__, dlci, tty_idx);
++                              }
++                              break;
++                      case DATATAG:
++                      default:
++                              tty_idx = dlci2tty[dlci].datatty;
++                              TS0710_DEBUG
++                                  ("NON-CMDTAG on DLCI:%d, /dev/mux%d\n",
++                                   dlci, tty_idx);
++                              if (iscmdtty[tty_idx]) {
++                                      TS0710_PRINTK
++                                          ("MUX Error: %s: Wrong NON-CMDTAG on DLCI:%d, /dev/mux%d\n",
++                                           __FUNCTION__, dlci, tty_idx);
++                              }
++                              break;
++                      }
++                      tty = mux_table[tty_idx];
++                      if ((!mux_tty[tty_idx]) || (!tty)) {
++                              TS0710_PRINTK
++                                  ("MUX: No application waiting for, discard it! /dev/mux%d\n",
++                                   tty_idx);
++                      } else {        /* Begin processing received data */
++                              if ((!mux_recv_info_flags[tty_idx])
++                                  || (!mux_recv_info[tty_idx])) {
++                                      TS0710_PRINTK
++                                          ("MUX Error: No mux_recv_info, discard it! /dev/mux%d\n",
++                                           tty_idx);
++                                      break;
++                              }
++
++                              recv_info = mux_recv_info[tty_idx];
++                              if (recv_info->total > 8192) {
++                                      TS0710_PRINTK
++                                          ("MUX : discard data for tty_idx:%d, recv_info->total > 8192 \n",
++                                           tty_idx);
++                                      break;
++                              }
++
++                              queue_data = 0;
++                              post_recv = 0;
++                              flow_control = 0;
++                              recv_room = 65535;
++                              if (tty->receive_room)
++                                      recv_room = tty->receive_room;
++
++                              if (test_bit(TTY_THROTTLED, &tty->flags)) {
++                                      queue_data = 1;
++                              } else {
++                                      if (test_bit
++                                          (TTY_DONT_FLIP, &tty->flags)) {
++                                              queue_data = 1;
++                                              post_recv = 1;
++                                      } else if (recv_info->total) {
++                                              queue_data = 1;
++                                              post_recv = 1;
++                                      } else if (recv_room < uih_len) {
++                                              queue_data = 1;
++                                              flow_control = 1;
++                                      }
++
++                                      if ((recv_room -
++                                           (uih_len + recv_info->total)) <
++                                          ts0710->dlci[dlci].mtu) {
++                                              flow_control = 1;
++                                      }
++                              }
++
++                              if (!queue_data) {
++                                      /* Put received data into read buffer of tty */
++                                      TS0710_DEBUG
++                                          ("Put received data into read buffer of /dev/mux%d",
++                                           tty_idx);
++
++#ifdef TS0710DEBUG
++                                      t = jiffies;
++#endif
++
++                                      (tty->ldisc.receive_buf) (tty,
++                                                                uih_data_start,
++                                                                NULL,
++                                                                uih_len);
++
++#ifdef TS0710DEBUG
++                                      TS0710_DEBUG
++                                          ("tty->ldisc.receive_buf take ticks: %lu",
++                                           (jiffies - t));
++#endif
++
++                              } else {        /* Queue data */
++
++                                      TS0710_DEBUG
++                                          ("Put received data into recv queue of /dev/mux%d",
++                                           tty_idx);
++                                      if (recv_info->total) {
++                                              /* recv_info is already linked into mux_recv_queue */
++
++                                              recv_packet =
++                                                  get_mux_recv_packet
++                                                  (uih_len);
++                                              if (!recv_packet) {
++                                                      TS0710_PRINTK
++                                                          ("MUX %s: no memory\n",
++                                                           __FUNCTION__);
++                                                      break;
++                                              }
++
++                                              memcpy(recv_packet->data,
++                                                     uih_data_start, uih_len);
++                                              recv_packet->length = uih_len;
++                                              recv_info->total += uih_len;
++                                              recv_packet->next = NULL;
++
++                                              if (!(recv_info->mux_packet)) {
++                                                      recv_info->mux_packet =
++                                                          recv_packet;
++                                              } else {
++                                                      recv_packet2 =
++                                                          recv_info->
++                                                          mux_packet;
++                                                      while (recv_packet2->
++                                                             next) {
++                                                              recv_packet2 =
++                                                                  recv_packet2->
++                                                                  next;
++                                                      }
++                                                      recv_packet2->next =
++                                                          recv_packet;
++                                              }       /* End if( !(recv_info->mux_packet) ) */
++                                      } else {        /* recv_info->total == 0 */
++                                              if (uih_len >
++                                                  TS0710MUX_RECV_BUF_SIZE) {
++                                                      TS0710_PRINTK
++                                                          ("MUX Error:  tty_idx:%d, uih_len == %d is too big\n",
++                                                           tty_idx, uih_len);
++                                                      uih_len =
++                                                          TS0710MUX_RECV_BUF_SIZE;
++                                              }
++                                              memcpy(recv_info->data,
++                                                     uih_data_start, uih_len);
++                                              recv_info->length = uih_len;
++                                              recv_info->total = uih_len;
++
++                                              add_post_recv_queue
++                                                  (&mux_recv_queue,
++                                                   recv_info);
++                                      }       /* End recv_info->total == 0 */
++                              }       /* End Queue data */
++
++                              if (flow_control) {
++                                      /* Do something for flow control */
++                                      ts0710_flow_off(tty, dlci, ts0710);
++                              }
++
++                              if (tty_idx ==
++                                  dlci2tty[TS0710MUX_GPRS1_DLCI].datatty) {
++                                      if (add_count
++                                          (TS0710MUX_GPRS1_RECV_COUNT_IDX,
++                                           uih_len) < 0) {
++                                              post_recv_count_flag = 1;
++                                              post_recv = 1;
++                                              mux_data_count2
++                                                  [TS0710MUX_GPRS1_RECV_COUNT_IDX]
++                                                  += uih_len;
++                                      }
++                              } else if (tty_idx ==
++                                         dlci2tty[TS0710MUX_GPRS2_DLCI].
++                                         datatty) {
++                                      if (add_count
++                                          (TS0710MUX_GPRS2_RECV_COUNT_IDX,
++                                           uih_len) < 0) {
++                                              post_recv_count_flag = 1;
++                                              post_recv = 1;
++                                              mux_data_count2
++                                                  [TS0710MUX_GPRS2_RECV_COUNT_IDX]
++                                                  += uih_len;
++                                      }
++                              }
++
++                              if (post_recv)
++                                      schedule_work(&post_recv_tqueue);
++                      }       /* End processing received data */
++              } else {
++                      TS0710_DEBUG("invalid dlci %d\n", dlci);
++              }
++
++              break;
++
++      default:
++              TS0710_DEBUG("illegal packet\n");
++              break;
++      }
++      return 0;
++}
++
++/*
++int ts0710_send_data(ts0710_con *ts0710, __u8 dlci, __u8 *data, __u32 count)
++{
++  __u32 c, total = 0;
++  __u8 tag, first;
++
++  if( ts0710->dlci[0].state == FLOW_STOPPED ){
++    TS0710_DEBUG("Flow stopped on all channels, returning zero\n");
++*/
++/*
++    return -EFLOWSTOPPED;
++  } else if( ts0710->dlci[dlci].state == FLOW_STOPPED ){
++    TS0710_DEBUG("Flow stopped, returning zero\n");
++*/
++/*
++    return -EFLOWSTOPPED;
++  } else if( ts0710->dlci[dlci].state == CONNECTED ){
++
++    TS0710_DEBUG("trying to send %d bytes\n", count);
++    tag = *data;
++    first = 1;
++*/
++    /* The first byte is always a Cmd/Data tag */
++/*
++    while( count > 1 ){
++
++      c = min(count, ts0710->dlci[dlci].mtu);
++      if( queue_uih(data, c, ts0710, dlci) <= 0 ) {
++        break;
++      }
++
++      total += (c - 1);
++      data += (c - 1);
++      *data = tag;
++      count -= (c - 1);
++
++      if( first ) {
++        first = 0;
++      total++;
++      }
++    }
++    TS0710_DEBUG("sent %d bytes\n", total);
++    return total;
++  } else {
++    TS0710_DEBUG("DLCI %d not connected\n", dlci);
++    return -EDISCONNECTED;
++  }
++}
++*/
++
++/* Close ts0710 channel */
++static void ts0710_close_channel(__u8 dlci)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      int try;
++      unsigned long t;
++
++      TS0710_DEBUG("ts0710_disc_command on channel %d\n", dlci);
++
++      if ((ts0710->dlci[dlci].state == DISCONNECTED)
++          || (ts0710->dlci[dlci].state == REJECTED)) {
++              return;
++      } else if (ts0710->dlci[dlci].state == DISCONNECTING) {
++              /* Reentry */
++              return;
++      } else {
++              ts0710->dlci[dlci].state = DISCONNECTING;
++              try = 3;
++              while (try--) {
++                      t = jiffies;
++                      send_disc(ts0710, dlci);
++                      interruptible_sleep_on_timeout(&ts0710->dlci[dlci].
++                                                     close_wait,
++                                                     TS0710MUX_TIME_OUT);
++                      if (ts0710->dlci[dlci].state == DISCONNECTED) {
++                              break;
++                      } else if (signal_pending(current)) {
++                              TS0710_PRINTK
++                                  ("MUX DLCI %d Send DISC got signal!\n",
++                                   dlci);
++                              break;
++                      } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
++                              TS0710_PRINTK
++                                  ("MUX DLCI %d Send DISC timeout!\n", dlci);
++                              continue;
++                      }
++              }
++
++              if (ts0710->dlci[dlci].state != DISCONNECTED) {
++                      if (dlci == 0) {        /* Control Channel */
++                              ts0710_upon_disconnect();
++                      } else {        /* Other Channel */
++                              ts0710->dlci[dlci].state = DISCONNECTED;
++                              wake_up_interruptible(&ts0710->dlci[dlci].
++                                                    close_wait);
++                              ts0710_reset_dlci(dlci);
++                      }
++              }
++      }
++}
++
++int ts0710_open_channel(__u8 dlci)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      int try;
++      int retval;
++      unsigned long t;
++
++      retval = -ENODEV;
++      if (dlci == 0) {        // control channel
++              if ((ts0710->dlci[0].state == CONNECTED)
++                  || (ts0710->dlci[0].state == FLOW_STOPPED)) {
++                      return 0;
++              } else if (ts0710->dlci[0].state == CONNECTING) {
++                      /* Reentry */
++                      TS0710_PRINTK
++                          ("MUX DLCI: 0, reentry to open DLCI 0, pid: %d, %s !\n",
++                           current->pid, current->comm);
++                      try = 11;
++                      while (try--) {
++                              t = jiffies;
++                              interruptible_sleep_on_timeout(&ts0710->dlci[0].
++                                                             open_wait,
++                                                             TS0710MUX_TIME_OUT);
++                              if ((ts0710->dlci[0].state == CONNECTED)
++                                  || (ts0710->dlci[0].state ==
++                                      FLOW_STOPPED)) {
++                                      retval = 0;
++                                      break;
++                              } else if (ts0710->dlci[0].state == REJECTED) {
++                                      retval = -EREJECTED;
++                                      break;
++                              } else if (ts0710->dlci[0].state ==
++                                         DISCONNECTED) {
++                                      break;
++                              } else if (signal_pending(current)) {
++                                      TS0710_PRINTK
++                                          ("MUX DLCI:%d Wait for connecting got signal!\n",
++                                           dlci);
++                                      retval = -EAGAIN;
++                                      break;
++                              } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
++                                      TS0710_PRINTK
++                                          ("MUX DLCI:%d Wait for connecting timeout!\n",
++                                           dlci);
++                                      continue;
++                              } else if (ts0710->dlci[0].state == CONNECTING) {
++                                      continue;
++                              }
++                      }
++
++                      if (ts0710->dlci[0].state == CONNECTING) {
++                              ts0710->dlci[0].state = DISCONNECTED;
++                      }
++              } else if ((ts0710->dlci[0].state != DISCONNECTED)
++                         && (ts0710->dlci[0].state != REJECTED)) {
++                      TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci);
++                      return retval;
++              } else {
++                      ts0710->initiator = 1;
++                      ts0710->dlci[0].state = CONNECTING;
++                      ts0710->dlci[0].initiator = 1;
++                      try = 10;
++                      while (try--) {
++                              t = jiffies;
++                              send_sabm(ts0710, 0);
++                              interruptible_sleep_on_timeout(&ts0710->dlci[0].
++                                                             open_wait,
++                                                             TS0710MUX_TIME_OUT);
++                              if ((ts0710->dlci[0].state == CONNECTED)
++                                  || (ts0710->dlci[0].state ==
++                                      FLOW_STOPPED)) {
++                                      retval = 0;
++                                      break;
++                              } else if (ts0710->dlci[0].state == REJECTED) {
++                                      TS0710_PRINTK
++                                          ("MUX DLCI:%d Send SABM got rejected!\n",
++                                           dlci);
++                                      retval = -EREJECTED;
++                                      break;
++                              } else if (signal_pending(current)) {
++                                      TS0710_PRINTK
++                                          ("MUX DLCI:%d Send SABM got signal!\n",
++                                           dlci);
++                                      retval = -EAGAIN;
++                                      break;
++                              } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
++                                      TS0710_PRINTK
++                                          ("MUX DLCI:%d Send SABM timeout!\n",
++                                           dlci);
++                                      continue;
++                              }
++                      }
++
++                      if (ts0710->dlci[0].state == CONNECTING) {
++                              ts0710->dlci[0].state = DISCONNECTED;
++                      }
++                      wake_up_interruptible(&ts0710->dlci[0].open_wait);
++              }
++      } else {                // other channel
++              if ((ts0710->dlci[0].state != CONNECTED)
++                  && (ts0710->dlci[0].state != FLOW_STOPPED)) {
++                      return retval;
++              } else if ((ts0710->dlci[dlci].state == CONNECTED)
++                         || (ts0710->dlci[dlci].state == FLOW_STOPPED)) {
++                      return 0;
++              } else if ((ts0710->dlci[dlci].state == NEGOTIATING)
++                         || (ts0710->dlci[dlci].state == CONNECTING)) {
++                      /* Reentry */
++                      try = 8;
++                      while (try--) {
++                              t = jiffies;
++                              interruptible_sleep_on_timeout(&ts0710->
++                                                             dlci[dlci].
++                                                             open_wait,
++                                                             TS0710MUX_TIME_OUT);
++                              if ((ts0710->dlci[dlci].state == CONNECTED)
++                                  || (ts0710->dlci[dlci].state ==
++                                      FLOW_STOPPED)) {
++                                      retval = 0;
++                                      break;
++                              } else if (ts0710->dlci[dlci].state == REJECTED) {
++                                      retval = -EREJECTED;
++                                      break;
++                              } else if (ts0710->dlci[dlci].state ==
++                                         DISCONNECTED) {
++                                      break;
++                              } else if (signal_pending(current)) {
++                                      TS0710_PRINTK
++                                          ("MUX DLCI:%d Wait for connecting got signal!\n",
++                                           dlci);
++                                      retval = -EAGAIN;
++                                      break;
++                              } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
++                                      TS0710_PRINTK
++                                          ("MUX DLCI:%d Wait for connecting timeout!\n",
++                                           dlci);
++                                      continue;
++                              } else
++                                  if ((ts0710->dlci[dlci].state ==
++                                       NEGOTIATING)
++                                      || (ts0710->dlci[dlci].state ==
++                                          CONNECTING)) {
++                                      continue;
++                              }
++                      }
++
++                      if ((ts0710->dlci[dlci].state == NEGOTIATING)
++                          || (ts0710->dlci[dlci].state == CONNECTING)) {
++                              ts0710->dlci[dlci].state = DISCONNECTED;
++                      }
++              } else if ((ts0710->dlci[dlci].state != DISCONNECTED)
++                         && (ts0710->dlci[dlci].state != REJECTED)) {
++                      TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci);
++                      return retval;
++              } else {
++                      ts0710->dlci[dlci].state = NEGOTIATING;
++                      ts0710->dlci[dlci].initiator = 1;
++                      try = 3;
++                      while (try--) {
++                              t = jiffies;
++                              send_pn_msg(ts0710, 7, ts0710->dlci[dlci].mtu,
++                                          0, 0, dlci, 1);
++                              interruptible_sleep_on_timeout(&ts0710->
++                                                             dlci[dlci].
++                                                             open_wait,
++                                                             TS0710MUX_TIME_OUT);
++                              if (ts0710->dlci[dlci].state == CONNECTING) {
++                                      break;
++                              } else if (signal_pending(current)) {
++                                      TS0710_PRINTK
++                                          ("MUX DLCI:%d Send pn_msg got signal!\n",
++                                           dlci);
++                                      retval = -EAGAIN;
++                                      break;
++                              } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
++                                      TS0710_PRINTK
++                                          ("MUX DLCI:%d Send pn_msg timeout!\n",
++                                           dlci);
++                                      continue;
++                              }
++                      }
++
++                      if (ts0710->dlci[dlci].state == CONNECTING) {
++                              try = 3;
++                              while (try--) {
++                                      t = jiffies;
++                                      send_sabm(ts0710, dlci);
++                                      interruptible_sleep_on_timeout(&ts0710->
++                                                                     dlci
++                                                                     [dlci].
++                                                                     open_wait,
++                                                                     TS0710MUX_TIME_OUT);
++                                      if ((ts0710->dlci[dlci].state ==
++                                           CONNECTED)
++                                          || (ts0710->dlci[dlci].state ==
++                                              FLOW_STOPPED)) {
++                                              retval = 0;
++                                              break;
++                                      } else if (ts0710->dlci[dlci].state ==
++                                                 REJECTED) {
++                                              TS0710_PRINTK
++                                                  ("MUX DLCI:%d Send SABM got rejected!\n",
++                                                   dlci);
++                                              retval = -EREJECTED;
++                                              break;
++                                      } else if (signal_pending(current)) {
++                                              TS0710_PRINTK
++                                                  ("MUX DLCI:%d Send SABM got signal!\n",
++                                                   dlci);
++                                              retval = -EAGAIN;
++                                              break;
++                                      } else if ((jiffies - t) >=
++                                                 TS0710MUX_TIME_OUT) {
++                                              TS0710_PRINTK
++                                                  ("MUX DLCI:%d Send SABM timeout!\n",
++                                                   dlci);
++                                              continue;
++                                      }
++                              }
++                      }
++
++                      if ((ts0710->dlci[dlci].state == NEGOTIATING)
++                          || (ts0710->dlci[dlci].state == CONNECTING)) {
++                              ts0710->dlci[dlci].state = DISCONNECTED;
++                      }
++                      wake_up_interruptible(&ts0710->dlci[dlci].open_wait);
++              }
++      }
++      return retval;
++}
++
++static int ts0710_exec_test_cmd(void)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      __u8 *f_buf;            /* Frame buffer */
++      __u8 *d_buf;            /* Data buffer */
++      int retval = -EFAULT;
++      int j;
++      unsigned long t;
++
++      if (ts0710->be_testing) {
++              /* Reentry */
++              t = jiffies;
++              interruptible_sleep_on_timeout(&ts0710->test_wait,
++                                             3 * TS0710MUX_TIME_OUT);
++              if (ts0710->be_testing == 0) {
++                      if (ts0710->test_errs == 0) {
++                              retval = 0;
++                      } else {
++                              retval = -EFAULT;
++                      }
++              } else if (signal_pending(current)) {
++                      TS0710_DEBUG
++                          ("Wait for Test_cmd response got signal!\n");
++                      retval = -EAGAIN;
++              } else if ((jiffies - t) >= 3 * TS0710MUX_TIME_OUT) {
++                      TS0710_DEBUG("Wait for Test_cmd response timeout!\n");
++                      retval = -EFAULT;
++              }
++      } else {
++              ts0710->be_testing = 1; /* Set the flag */
++
++              f_buf = (__u8 *) kmalloc(TEST_PATTERN_SIZE + 32, GFP_KERNEL);
++              d_buf = (__u8 *) kmalloc(TEST_PATTERN_SIZE + 32, GFP_KERNEL);
++              if ((!f_buf) || (!d_buf)) {
++                      if (f_buf) {
++                              kfree(f_buf);
++                      }
++                      if (d_buf) {
++                              kfree(d_buf);
++                      }
++
++                      ts0710->be_testing = 0; /* Clear the flag */
++                      ts0710->test_errs = TEST_PATTERN_SIZE;
++                      wake_up_interruptible(&ts0710->test_wait);
++                      return -ENOMEM;
++              }
++
++              for (j = 0; j < TEST_PATTERN_SIZE; j++) {
++                      d_buf[j] = j & 0xFF;
++              }
++
++              t = jiffies;
++              ts0710_test_msg(ts0710, d_buf, TEST_PATTERN_SIZE, MCC_CMD,
++                              f_buf);
++              interruptible_sleep_on_timeout(&ts0710->test_wait,
++                                             2 * TS0710MUX_TIME_OUT);
++              if (ts0710->be_testing == 0) {
++                      if (ts0710->test_errs == 0) {
++                              retval = 0;
++                      } else {
++                              retval = -EFAULT;
++                      }
++              } else if (signal_pending(current)) {
++                      TS0710_DEBUG("Send Test_cmd got signal!\n");
++                      retval = -EAGAIN;
++              } else if ((jiffies - t) >= 2 * TS0710MUX_TIME_OUT) {
++                      TS0710_DEBUG("Send Test_cmd timeout!\n");
++                      ts0710->test_errs = TEST_PATTERN_SIZE;
++                      retval = -EFAULT;
++              }
++
++              ts0710->be_testing = 0; /* Clear the flag */
++              wake_up_interruptible(&ts0710->test_wait);
++
++              /* Release buffer */
++              if (f_buf) {
++                      kfree(f_buf);
++              }
++              if (d_buf) {
++                      kfree(d_buf);
++              }
++      }
++
++      return retval;
++}
++
++static void mux_sched_send(void)
++{
++
++#ifdef USB_FOR_MUX
++      schedule_work(&send_tqueue);
++#else
++      if (!tq_serial_for_mux) {
++              TS0710_PRINTK("MUX Error: %s: tq_serial_for_mux == 0\n",
++                            __FUNCTION__);
++              return;
++      }
++      schedule_work(&send_tqueue);
++      mark_bh(SERIAL_BH);
++#endif
++
++}
++
++/****************************
++ * TTY driver routines
++*****************************/
++
++static void mux_close(struct tty_struct *tty, struct file *filp)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      int line;
++      __u8 dlci;
++      __u8 cmdtty;
++      __u8 datatty;
++
++      UNUSED_PARAM(filp);
++
++      if (!tty) {
++              return;
++      }
++      line = tty->index;
++      if ((line < 0) || (line >= NR_MUXS)) {
++              return;
++      }
++      if (mux_tty[line] > 0)
++              mux_tty[line]--;
++
++      dlci = tty2dlci[line];
++      cmdtty = dlci2tty[dlci].cmdtty;
++      datatty = dlci2tty[dlci].datatty;
++      if ((mux_tty[cmdtty] == 0) && (mux_tty[datatty] == 0)) {
++              if (dlci == 1) {
++                      ts0710_close_channel(0);
++                      TS0710_PRINTK
++                          ("MUX mux_close: tapisrv might be down!!! Close DLCI 1\n");
++                      TS0710_SIG2APLOGD();
++              }
++              ts0710_close_channel(dlci);
++      }
++
++      if (mux_tty[line] == 0) {
++              if ((mux_send_info_flags[line])
++                  && (mux_send_info[line])
++                  /*&& (mux_send_info[line]->filled == 0) */
++                  ) {
++                      mux_send_info_flags[line] = 0;
++                      kfree(mux_send_info[line]);
++                      mux_send_info[line] = 0;
++                      TS0710_DEBUG("Free mux_send_info for /dev/mux%d", line);
++              }
++
++              if ((mux_recv_info_flags[line])
++                  && (mux_recv_info[line])
++                  && (mux_recv_info[line]->total == 0)) {
++                      mux_recv_info_flags[line] = 0;
++                      free_mux_recv_struct(mux_recv_info[line]);
++                      mux_recv_info[line] = 0;
++                      TS0710_DEBUG("Free mux_recv_info for /dev/mux%d", line);
++              }
++
++              ts0710_flow_on(dlci, ts0710);
++              schedule_work(&post_recv_tqueue);
++
++              wake_up_interruptible(&tty->read_wait);
++              wake_up_interruptible(&tty->write_wait);
++              tty->packet = 0;
++      }
++}
++
++static void mux_throttle(struct tty_struct *tty)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      int line;
++      int i;
++      __u8 dlci;
++
++      if (!tty) {
++              return;
++      }
++
++      line = tty->index;
++      if ((line < 0) || (line >= NR_MUXS)) {
++              return;
++      }
++
++      TS0710_DEBUG("Enter into %s, minor number is: %d\n", __FUNCTION__,
++                   line);
++
++      dlci = tty2dlci[line];
++      if ((ts0710->dlci[0].state != CONNECTED)
++          && (ts0710->dlci[0].state != FLOW_STOPPED)) {
++              return;
++      } else if ((ts0710->dlci[dlci].state != CONNECTED)
++                 && (ts0710->dlci[dlci].state != FLOW_STOPPED)) {
++              return;
++      }
++
++      if (ts0710->dlci[dlci].flow_control) {
++              return;
++      }
++
++      for (i = 0; i < 3; i++) {
++              if (ts0710_msc_msg
++                  (ts0710, EA | FC | RTC | RTR | DV, MCC_CMD, dlci) < 0) {
++                      continue;
++              } else {
++                      TS0710_LOG("MUX Send Flow off on dlci %d\n", dlci);
++                      ts0710->dlci[dlci].flow_control = 1;
++                      break;
++              }
++      }
++}
++
++static void mux_unthrottle(struct tty_struct *tty)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      int line;
++      __u8 dlci;
++      mux_recv_struct *recv_info;
++
++      if (!tty) {
++              return;
++      }
++      line = tty->index;
++      if ((line < 0) || (line >= NR_MUXS)) {
++              return;
++      }
++
++      if ((!mux_recv_info_flags[line]) || (!mux_recv_info[line])) {
++              return;
++      }
++
++      TS0710_DEBUG("Enter into %s, minor number is: %d\n", __FUNCTION__,
++                   line);
++
++      recv_info = mux_recv_info[line];
++      dlci = tty2dlci[line];
++
++      if (recv_info->total) {
++              recv_info->post_unthrottle = 1;
++              schedule_work(&post_recv_tqueue);
++      } else {
++              ts0710_flow_on(dlci, ts0710);
++      }
++}
++
++static int mux_chars_in_buffer(struct tty_struct *tty)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      int retval;
++      int line;
++      __u8 dlci;
++      mux_send_struct *send_info;
++
++      retval = TS0710MUX_MAX_CHARS_IN_BUF;
++      if (!tty) {
++              goto out;
++      }
++      line = tty->index;
++      if ((line < 0) || (line >= NR_MUXS)) {
++              goto out;
++      }
++
++      dlci = tty2dlci[line];
++      if (ts0710->dlci[0].state == FLOW_STOPPED) {
++              TS0710_DEBUG
++                  ("Flow stopped on all channels, returning MAX chars in buffer\n");
++              goto out;
++      } else if (ts0710->dlci[dlci].state == FLOW_STOPPED) {
++              TS0710_DEBUG("Flow stopped, returning MAX chars in buffer\n");
++              goto out;
++      } else if (ts0710->dlci[dlci].state != CONNECTED) {
++              TS0710_DEBUG("DLCI %d not connected\n", dlci);
++              goto out;
++      }
++
++      if (!(mux_send_info_flags[line])) {
++              goto out;
++      }
++      send_info = mux_send_info[line];
++      if (!send_info) {
++              goto out;
++      }
++      if (send_info->filled) {
++              goto out;
++      }
++
++      retval = 0;
++
++      out:
++      return retval;
++}
++
++static int mux_chars_in_serial_buffer(struct tty_struct *tty)
++{
++      UNUSED_PARAM(tty);
++
++      if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) {
++              TS0710_PRINTK
++                  ("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n",
++                   __FUNCTION__);
++
++#ifndef USB_FOR_MUX
++              TS0710_PRINTK
++                  ("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n",
++                   __FUNCTION__);
++              TS0710_SIG2APLOGD();
++#endif
++
++              return 0;
++      }
++      return COMM_FOR_MUX_DRIVER->chars_in_buffer(COMM_FOR_MUX_TTY);
++}
++
++static int mux_write(struct tty_struct *tty,
++                   const unsigned char *buf, int count)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      int line;
++      __u8 dlci;
++      mux_send_struct *send_info;
++      __u8 *d_buf;
++      __u16 c;
++      __u8 post_recv;
++
++      if (count <= 0) {
++              return 0;
++      }
++
++      if (!tty) {
++              return 0;
++      }
++
++      line = tty->index;
++      if ((line < 0) || (line >= NR_MUXS))
++              return -ENODEV;
++
++      dlci = tty2dlci[line];
++      if (ts0710->dlci[0].state == FLOW_STOPPED) {
++              TS0710_DEBUG
++                  ("Flow stopped on all channels, returning zero /dev/mux%d\n",
++                   line);
++              return 0;
++      } else if (ts0710->dlci[dlci].state == FLOW_STOPPED) {
++              TS0710_DEBUG("Flow stopped, returning zero /dev/mux%d\n", line);
++              return 0;
++      } else if (ts0710->dlci[dlci].state == CONNECTED) {
++
++              if (!(mux_send_info_flags[line])) {
++                      TS0710_PRINTK
++                          ("MUX Error: mux_write: mux_send_info_flags[%d] == 0\n",
++                           line);
++                      return -ENODEV;
++              }
++              send_info = mux_send_info[line];
++              if (!send_info) {
++                      TS0710_PRINTK
++                          ("MUX Error: mux_write: mux_send_info[%d] == 0\n",
++                           line);
++                      return -ENODEV;
++              }
++
++              c = min(count, (ts0710->dlci[dlci].mtu - 1));
++              if (c <= 0) {
++                      return 0;
++              }
++
++              if (test_and_set_bit(BUF_BUSY, &send_info->flags))
++                      return 0;
++
++              if (send_info->filled) {
++                      clear_bit(BUF_BUSY, &send_info->flags);
++                      return 0;
++              }
++
++              d_buf = ((__u8 *) send_info->buf) + TS0710MUX_SEND_BUF_OFFSET;
++              memcpy(&d_buf[1], buf, c);
++
++              TS0710_DEBUG("Prepare to send %d bytes from /dev/mux%d", c,
++                           line);
++              if (iscmdtty[line]) {
++                      TS0710_DEBUGSTR(&d_buf[1], c);
++                      TS0710_DEBUG("CMDTAG");
++                      d_buf[0] = CMDTAG;
++              } else {
++                      TS0710_DEBUG("DATATAG");
++                      d_buf[0] = DATATAG;
++              }
++
++              TS0710_DEBUGHEX(d_buf, c + 1);
++
++              send_info->frame = d_buf;
++              queue_uih(send_info, c + 1, ts0710, dlci);
++              send_info->filled = 1;
++              clear_bit(BUF_BUSY, &send_info->flags);
++
++              post_recv = 0;
++              if (dlci == TS0710MUX_GPRS1_DLCI) {
++                      if (add_count
++                          (TS0710MUX_GPRS1_SEND_COUNT_IDX, c) < 0) {
++                              post_recv_count_flag = 1;
++                              post_recv = 1;
++                              mux_data_count2[TS0710MUX_GPRS1_SEND_COUNT_IDX]
++                                  += c;
++                      }
++              } else if (dlci == TS0710MUX_GPRS2_DLCI) {
++                      if (add_count
++                          (TS0710MUX_GPRS2_SEND_COUNT_IDX, c) < 0) {
++                              post_recv_count_flag = 1;
++                              post_recv = 1;
++                              mux_data_count2[TS0710MUX_GPRS2_SEND_COUNT_IDX]
++                                  += c;
++                      }
++              }
++
++              if (post_recv)
++                      schedule_work(&post_recv_tqueue);
++
++              if (mux_chars_in_serial_buffer(COMM_FOR_MUX_TTY) == 0) {
++                      /* Sending bottom half should be
++                         run after return from this function */
++                      mux_sched_send();
++              }
++              return c;
++      } else {
++              TS0710_PRINTK("MUX mux_write: DLCI %d not connected\n", dlci);
++              return -EDISCONNECTED;
++      }
++}
++
++static int mux_write_room(struct tty_struct *tty)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      int retval;
++      int line;
++      __u8 dlci;
++      mux_send_struct *send_info;
++
++      retval = 0;
++      if (!tty) {
++              goto out;
++      }
++      line = tty->index;
++      if ((line < 0) || (line >= NR_MUXS)) {
++              goto out;
++      }
++
++      dlci = tty2dlci[line];
++      if (ts0710->dlci[0].state == FLOW_STOPPED) {
++              TS0710_DEBUG("Flow stopped on all channels, returning ZERO\n");
++              goto out;
++      } else if (ts0710->dlci[dlci].state == FLOW_STOPPED) {
++              TS0710_DEBUG("Flow stopped, returning ZERO\n");
++              goto out;
++      } else if (ts0710->dlci[dlci].state != CONNECTED) {
++              TS0710_DEBUG("DLCI %d not connected\n", dlci);
++              goto out;
++      }
++
++      if (!(mux_send_info_flags[line])) {
++              goto out;
++      }
++      send_info = mux_send_info[line];
++      if (!send_info) {
++              goto out;
++      }
++      if (send_info->filled) {
++              goto out;
++      }
++
++      retval = ts0710->dlci[dlci].mtu - 1;
++
++      out:
++      return retval;
++}
++
++static int mux_ioctl(struct tty_struct *tty, struct file *file,
++                   unsigned int cmd, unsigned long arg)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      int line;
++      __u8 dlci;
++
++      UNUSED_PARAM(file);
++      UNUSED_PARAM(arg);
++
++      if (!tty) {
++              return -EIO;
++      }
++      line = tty->index;
++      if ((line < 0) || (line >= NR_MUXS)) {
++              return -ENODEV;
++      }
++
++      dlci = tty2dlci[line];
++      switch (cmd) {
++      case TS0710MUX_IO_MSC_HANGUP:
++              if (ts0710_msc_msg(ts0710, EA | RTR | DV, MCC_CMD, dlci) < 0) {
++                      return -EAGAIN;
++              } else {
++                      return 0;
++              }
++
++      case TS0710MUX_IO_TEST_CMD:
++              return ts0710_exec_test_cmd();
++/*
++    case TS0710MUX_IO_DLCI_FC_ON:
++      if( line == 0 ) {
++        break;
++      }
++      if( ts0710_msc_msg(ts0710, EA | RTC | RTR | DV, MCC_CMD, (__u8)line) < 0) {
++        return -EAGAIN;
++      } else {
++        return 0;
++      }
++
++    case TS0710MUX_IO_DLCI_FC_OFF:
++      if( line == 0 ) {
++        break;
++      }
++      if( ts0710_msc_msg(ts0710, EA | FC | RTC | RTR | DV, MCC_CMD, (__u8)line) < 0) {
++        return -EAGAIN;
++      } else {
++        return 0;
++      }
++
++    case TS0710MUX_IO_FC_ON:
++      if( line != 0 ) {
++        break;
++      }
++      if( ts0710_fcon_msg(ts0710, MCC_CMD) < 0) {
++        return -EAGAIN;
++      } else {
++        return 0;
++      }
++
++    case TS0710MUX_IO_FC_OFF:
++      if( line != 0 ) {
++        break;
++      }
++      if( ts0710_fcoff_msg(ts0710, MCC_CMD) < 0) {
++        return -EAGAIN;
++      } else {
++        return 0;
++      }
++*/
++      default:
++              break;
++      }
++      return -ENOIOCTLCMD;
++}
++
++static void mux_flush_buffer(struct tty_struct *tty)
++{
++      int line;
++
++      if (!tty) {
++              return;
++      }
++
++      line = tty->index;
++      if ((line < 0) || (line >= NR_MUXS)) {
++              return;
++      }
++
++      TS0710_PRINTK("MUX %s: line is:%d\n", __FUNCTION__, line);
++
++      if ((mux_send_info_flags[line])
++          && (mux_send_info[line])
++          && (mux_send_info[line]->filled)) {
++
++              mux_send_info[line]->filled = 0;
++      }
++
++      wake_up_interruptible(&tty->write_wait);
++#ifdef SERIAL_HAVE_POLL_WAIT
++      wake_up_interruptible(&tty->poll_wait);
++#endif
++      if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
++          tty->ldisc.write_wakeup) {
++              (tty->ldisc.write_wakeup) (tty);
++      }
++
++/*
++  if( (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0) ) {
++    TS0710_PRINTK("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n", __FUNCTION__);
++
++#ifndef USB_FOR_MUX
++    TS0710_PRINTK("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n", __FUNCTION__);
++    TS0710_SIG2APLOGD();
++#endif
++
++    return;
++  }
++  return COMM_FOR_MUX_DRIVER->flush_buffer(COMM_FOR_MUX_TTY);
++*/
++}
++
++static int mux_open(struct tty_struct *tty, struct file *filp)
++{
++      int retval;
++      int line;
++      __u8 dlci;
++      __u8 cmdtty;
++      __u8 datatty;
++      mux_send_struct *send_info;
++      mux_recv_struct *recv_info;
++
++      UNUSED_PARAM(filp);
++
++      retval = -ENODEV;
++      if ((COMM_FOR_MUX_DRIVER == NULL) || (COMM_FOR_MUX_TTY == NULL)) {
++
++#ifdef USB_FOR_MUX
++              TS0710_PRINTK("MUX: please install and open IPC-USB first\n");
++#else
++              TS0710_PRINTK("MUX: please install and open ttyS0 first\n");
++#endif
++
++              goto out;
++      }
++
++      if (!tty) {
++              goto out;
++      }
++      line = tty->index;
++      if ((line < 0) || (line >= NR_MUXS)) {
++              goto out;
++      }
++#ifdef TS0710SERVER
++      /* do nothing as a server */
++      mux_tty[line]++;
++      retval = 0;
++#else
++      mux_tty[line]++;
++      dlci = tty2dlci[line];
++
++/*  if( dlci == 1 ) { */
++      /* Open server channel 0 first */
++      if ((retval = ts0710_open_channel(0)) != 0) {
++              TS0710_PRINTK("MUX: Can't connect server channel 0!\n");
++              ts0710_init();
++
++              mux_tty[line]--;
++              goto out;
++      }
++/*  } */
++
++      /* Allocate memory first. As soon as connection has been established, MUX may receive */
++      if (mux_send_info_flags[line] == 0) {
++              send_info =
++                  (mux_send_struct *) kmalloc(sizeof(mux_send_struct),
++                                              GFP_KERNEL);
++              if (!send_info) {
++                      retval = -ENOMEM;
++
++                      mux_tty[line]--;
++                      goto out;
++              }
++              send_info->length = 0;
++              send_info->flags = 0;
++              send_info->filled = 0;
++              mux_send_info[line] = send_info;
++              mux_send_info_flags[line] = 1;
++              TS0710_DEBUG("Allocate mux_send_info for /dev/mux%d", line);
++      }
++
++      if (mux_recv_info_flags[line] == 0) {
++              recv_info =
++                  (mux_recv_struct *) kmalloc(sizeof(mux_recv_struct),
++                                              GFP_KERNEL);
++              if (!recv_info) {
++                      mux_send_info_flags[line] = 0;
++                      kfree(mux_send_info[line]);
++                      mux_send_info[line] = 0;
++                      TS0710_DEBUG("Free mux_send_info for /dev/mux%d", line);
++                      retval = -ENOMEM;
++
++                      mux_tty[line]--;
++                      goto out;
++              }
++              recv_info->length = 0;
++              recv_info->total = 0;
++              recv_info->mux_packet = 0;
++              recv_info->next = 0;
++              recv_info->no_tty = line;
++              recv_info->post_unthrottle = 0;
++              mux_recv_info[line] = recv_info;
++              mux_recv_info_flags[line] = 1;
++              TS0710_DEBUG("Allocate mux_recv_info for /dev/mux%d", line);
++      }
++
++      /* Now establish DLCI connection */
++      cmdtty = dlci2tty[dlci].cmdtty;
++      datatty = dlci2tty[dlci].datatty;
++      if ((mux_tty[cmdtty] > 0) || (mux_tty[datatty] > 0)) {
++              if ((retval = ts0710_open_channel(dlci)) != 0) {
++                      TS0710_PRINTK("MUX: Can't connected channel %d!\n",
++                                    dlci);
++                      ts0710_reset_dlci(dlci);
++
++                      mux_send_info_flags[line] = 0;
++                      kfree(mux_send_info[line]);
++                      mux_send_info[line] = 0;
++                      TS0710_DEBUG("Free mux_send_info for /dev/mux%d", line);
++
++                      mux_recv_info_flags[line] = 0;
++                      free_mux_recv_struct(mux_recv_info[line]);
++                      mux_recv_info[line] = 0;
++                      TS0710_DEBUG("Free mux_recv_info for /dev/mux%d", line);
++
++                      mux_tty[line]--;
++                      goto out;
++              }
++      }
++
++      retval = 0;
++#endif
++      out:
++      return retval;
++}
++
++/* mux dispatcher, call from serial.c receiver_chars() */
++void mux_dispatcher(struct tty_struct *tty)
++{
++      UNUSED_PARAM(tty);
++
++      schedule_work(&receive_tqueue);
++}
++
++/*For BP UART problem Begin*/
++#ifdef TS0710SEQ2
++static int send_ack(ts0710_con * ts0710, __u8 seq_num, __u8 bp_seq1,
++                  __u8 bp_seq2)
++#else
++static int send_ack(ts0710_con * ts0710, __u8 seq_num)
++#endif
++{
++      __u8 buf[20];
++      short_frame *ack;
++
++#ifdef TS0710SEQ2
++      static __u16 ack_seq = 0;
++#endif
++
++      ack = (short_frame *) (buf + 1);
++      ack->h.addr.ea = 1;
++      ack->h.addr.cr = ((ts0710->initiator) & 0x1);
++      ack->h.addr.d = 0;
++      ack->h.addr.server_chn = 0;
++      ack->h.control = ACK;
++      ack->h.length.ea = 1;
++
++#ifdef TS0710SEQ2
++      ack->h.length.len = 5;
++      ack->data[0] = seq_num;
++      ack->data[1] = bp_seq1;
++      ack->data[2] = bp_seq2;
++      ack->data[3] = (ack_seq & 0xFF);
++      ack->data[4] = (ack_seq >> 8) & 0xFF;
++      ack_seq++;
++      ack->data[5] = crc_calc((__u8 *) ack, SHORT_CRC_CHECK);
++#else
++      ack->h.length.len = 1;
++      ack->data[0] = seq_num;
++      ack->data[1] = crc_calc((__u8 *) ack, SHORT_CRC_CHECK);
++#endif
++
++      return basic_write(ts0710, buf,
++                         (sizeof(short_frame) + FCS_SIZE +
++                          ack->h.length.len));
++}
++
++/*For BP UART problem End*/
++
++static void receive_worker(void *private_)
++{
++      struct tty_struct *tty = COMM_FOR_MUX_TTY;
++      int i, count;
++      static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE];
++      static unsigned char *tbuf_ptr = &tbuf[0];
++      static unsigned char *start_flag = 0;
++      unsigned char *search, *to, *from;
++      short_frame *short_pkt;
++      long_frame *long_pkt;
++      static int framelen = -1;
++
++      /*For BP UART problem Begin */
++      static __u8 expect_seq = 0;
++      __u32 crc_error;
++      __u8 *uih_data_start;
++      __u32 uih_len;
++      /*For BP UART problem End */
++
++      UNUSED_PARAM(private_);
++
++      if (!tty)
++              return;
++
++#ifdef USB_FOR_MUX
++      TS0710_DEBUG("Receive following bytes from IPC-USB");
++#else
++      TS0710_DEBUG("Receive following bytes from UART");
++#endif
++
++      TS0710_DEBUGHEX(cp, count);
++
++      if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) {
++              TS0710_PRINTK
++                  ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n");
++              count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf));
++      }
++
++      count = tty_buffer_request_room(tty, count);
++
++      for (i = 0; i < count; i++)
++              tty_insert_flip_char(tty, tbuf_ptr[i], TTY_NORMAL);
++
++      tbuf_ptr += count;
++      search = &tbuf[0];
++
++      if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) {
++              schedule_work(&receive_tqueue);
++              return;
++      }
++
++      if ((start_flag != 0) && (framelen != -1)) {
++              if ((tbuf_ptr - start_flag) < framelen) {
++                      clear_bit(RECV_RUNNING, &mux_recv_flags);
++                      return;
++              }
++      }
++
++      while (1) {
++              if (start_flag == 0) {  /* Frame Start Flag not found */
++                      framelen = -1;
++                      while (search < tbuf_ptr) {
++                              if (*search == TS0710_BASIC_FLAG) {
++                                      start_flag = search;
++                                      break;
++                              }
++#ifdef TS0710LOG
++                              else {
++                                      TS0710_LOG(">S %02x %c\n", *search,
++                                                 *search);
++                              }
++#endif
++
++                              search++;
++                      }
++
++                      if (start_flag == 0) {
++                              tbuf_ptr = &tbuf[0];
++                              break;
++                      }
++              } else {        /* Frame Start Flag found */
++                      /* 1 start flag + 1 address + 1 control + 1 or 2 length + lengths data + 1 FCS + 1 end flag */
++                      /* For BP UART problem 1 start flag + 1 seq_num + 1 address + ...... */
++                      /*if( (framelen == -1) && ((tbuf_ptr - start_flag) > TS0710_MAX_HDR_SIZE) ) */
++                      if ((framelen == -1) && ((tbuf_ptr - start_flag) > (TS0710_MAX_HDR_SIZE + SEQ_FIELD_SIZE))) {   /*For BP UART problem */
++                              /*short_pkt = (short_frame *) (start_flag + 1); */
++                              short_pkt = (short_frame *) (start_flag + ADDRESS_FIELD_OFFSET);        /*For BP UART problem */
++                              if (short_pkt->h.length.ea == 1) {      /* short frame */
++                                      /*framelen = TS0710_MAX_HDR_SIZE + short_pkt->h.length.len + 1; */
++                                      framelen = TS0710_MAX_HDR_SIZE + short_pkt->h.length.len + 1 + SEQ_FIELD_SIZE;  /*For BP UART problem */
++                              } else {        /* long frame */
++                                      /*long_pkt = (long_frame *) (start_flag + 1); */
++                                      long_pkt = (long_frame *) (start_flag + ADDRESS_FIELD_OFFSET);  /*For BP UART problem */
++                                      /*framelen = TS0710_MAX_HDR_SIZE + GET_LONG_LENGTH( long_pkt->h.length ) + 2; */
++                                      framelen = TS0710_MAX_HDR_SIZE + GET_LONG_LENGTH(long_pkt->h.length) + 2 + SEQ_FIELD_SIZE;      /*For BP UART problem */
++                              }
++
++                              /*if( framelen > TS0710MUX_MAX_TOTAL_FRAME_SIZE ) { */
++                              if (framelen > (TS0710MUX_MAX_TOTAL_FRAME_SIZE + SEQ_FIELD_SIZE)) {     /*For BP UART problem */
++                                      TS0710_LOGSTR_FRAME(0, start_flag,
++                                                          (tbuf_ptr -
++                                                           start_flag));
++                                      TS0710_PRINTK
++                                          ("MUX Error: %s: frame length:%d is bigger than Max total frame size:%d\n",
++               /*__FUNCTION__, framelen, TS0710MUX_MAX_TOTAL_FRAME_SIZE);*/
++                                           __FUNCTION__, framelen, (TS0710MUX_MAX_TOTAL_FRAME_SIZE + SEQ_FIELD_SIZE));        /*For BP UART problem */
++                                      search = start_flag + 1;
++                                      start_flag = 0;
++                                      framelen = -1;
++                                      continue;
++                              }
++                      }
++
++                      if ((framelen != -1)
++                          && ((tbuf_ptr - start_flag) >= framelen)) {
++                              if (*(start_flag + framelen - 1) == TS0710_BASIC_FLAG) {        /* OK, We got one frame */
++
++                                      /*For BP UART problem Begin */
++                                      TS0710_LOGSTR_FRAME(0, start_flag,
++                                                          framelen);
++                                      TS0710_DEBUGHEX(start_flag, framelen);
++
++                                      short_pkt =
++                                          (short_frame *) (start_flag +
++                                                           ADDRESS_FIELD_OFFSET);
++                                      if ((short_pkt->h.length.ea) == 0) {
++                                              long_pkt =
++                                                  (long_frame *) (start_flag +
++                                                                  ADDRESS_FIELD_OFFSET);
++                                              uih_len =
++                                                  GET_LONG_LENGTH(long_pkt->h.
++                                                                  length);
++                                              uih_data_start =
++                                                  long_pkt->h.data;
++
++                                              crc_error =
++                                                  crc_check((__u8
++                                                             *) (start_flag +
++                                                                 SLIDE_BP_SEQ_OFFSET),
++                                                            LONG_CRC_CHECK +
++                                                            1,
++                                                            *(uih_data_start +
++                                                              uih_len));
++                                      } else {
++                                              uih_len =
++                                                  short_pkt->h.length.len;
++                                              uih_data_start =
++                                                  short_pkt->data;
++
++                                              crc_error =
++                                                  crc_check((__u8
++                                                             *) (start_flag +
++                                                                 SLIDE_BP_SEQ_OFFSET),
++                                                            SHORT_CRC_CHECK +
++                                                            1,
++                                                            *(uih_data_start +
++                                                              uih_len));
++                                      }
++
++                                      if (!crc_error) {
++                                              if (expect_seq ==
++                                                  *(start_flag +
++                                                    SLIDE_BP_SEQ_OFFSET)) {
++                                                      expect_seq++;
++                                                      if (expect_seq >= 4) {
++                                                              expect_seq = 0;
++                                                      }
++#ifdef TS0710SEQ2
++                                                      send_ack
++                                                          (&ts0710_connection,
++                                                           expect_seq,
++                                                           *(start_flag +
++                                                             FIRST_BP_SEQ_OFFSET),
++                                                           *(start_flag +
++                                                             SECOND_BP_SEQ_OFFSET));
++#else
++                                                      send_ack
++                                                          (&ts0710_connection,
++                                                           expect_seq);
++#endif
++
++                                                      ts0710_recv_data
++                                                          (&ts0710_connection,
++                                                           start_flag +
++                                                           ADDRESS_FIELD_OFFSET,
++                                                           framelen - 2 -
++                                                           SEQ_FIELD_SIZE);
++                                              } else {
++
++#ifdef TS0710DEBUG
++                                                      if (*
++                                                          (start_flag +
++                                                           SLIDE_BP_SEQ_OFFSET)
++                                                          != 0x9F) {
++#endif
++
++                                                              TS0710_LOG
++                                                                  ("MUX sequence number %d is not expected %d, discard data!\n",
++                                                                   *
++                                                                   (start_flag
++                                                                    +
++                                                                    SLIDE_BP_SEQ_OFFSET),
++                                                                   expect_seq);
++
++#ifdef TS0710SEQ2
++                                                              send_ack
++                                                                  (&ts0710_connection,
++                                                                   expect_seq,
++                                                                   *
++                                                                   (start_flag
++                                                                    +
++                                                                    FIRST_BP_SEQ_OFFSET),
++                                                                   *
++                                                                   (start_flag
++                                                                    +
++                                                                    SECOND_BP_SEQ_OFFSET));
++#else
++                                                              send_ack
++                                                                  (&ts0710_connection,
++                                                                   expect_seq);
++#endif
++
++#ifdef TS0710DEBUG
++                                                      } else {
++                                                              *(uih_data_start
++                                                                + uih_len) =
++                                                   0;
++                                                              TS0710_PRINTK
++                                                                  ("MUX bp log: %s\n",
++                                                                   uih_data_start);
++                                                      }
++#endif
++
++                                              }
++                                      } else {        /* crc_error */
++                                              search = start_flag + 1;
++                                              start_flag = 0;
++                                              framelen = -1;
++                                              continue;
++                                      }       /*End if(!crc_error) */
++
++                                      /*For BP UART problem End */
++
++/*For BP UART problem
++          TS0710_LOGSTR_FRAME(0, start_flag, framelen);
++          TS0710_DEBUGHEX(start_flag, framelen);
++        ts0710_recv_data(&ts0710_connection, start_flag + 1, framelen - 2);
++*/
++                                      search = start_flag + framelen;
++                              } else {
++                                      TS0710_LOGSTR_FRAME(0, start_flag,
++                                                          framelen);
++                                      TS0710_DEBUGHEX(start_flag, framelen);
++                                      TS0710_PRINTK
++                                          ("MUX: Lost synchronization!\n");
++                                      search = start_flag + 1;
++                              }
++
++                              start_flag = 0;
++                              framelen = -1;
++                              continue;
++                      }
++
++                      if (start_flag != &tbuf[0]) {
++                              to = tbuf;
++                              from = start_flag;
++                              count = tbuf_ptr - start_flag;
++                              while (count--) {
++                                      *to++ = *from++;
++                              }
++
++                              tbuf_ptr -= (start_flag - tbuf);
++                              start_flag = tbuf;
++                      }
++                      break;
++              }               /* End Frame Start Flag found */
++      }                       /* End while(1) */
++
++      clear_bit(RECV_RUNNING, &mux_recv_flags);
++}
++
++static void post_recv_worker(void *private_)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      int tty_idx;
++      struct tty_struct *tty;
++      __u8 post_recv;
++      __u8 flow_control;
++      __u8 dlci;
++      mux_recv_struct *recv_info, *recv_info2, *post_recv_q;
++      int recv_room;
++      mux_recv_packet *recv_packet, *recv_packet2;
++      __u8 j;
++
++      UNUSED_PARAM(private_);
++
++      if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) {
++              schedule_work(&post_recv_tqueue);
++              return;
++      }
++
++      TS0710_DEBUG("Enter into post_recv_worker");
++
++      post_recv = 0;
++      if (!mux_recv_queue) {
++              goto out;
++      }
++
++      post_recv_q = NULL;
++      recv_info2 = mux_recv_queue;
++      while ((recv_info = recv_info2)) {
++              recv_info2 = recv_info->next;
++
++              if (!(recv_info->total)) {
++                      TS0710_PRINTK
++                          ("MUX Error: %s: Should not get here, recv_info->total == 0 \n",
++                           __FUNCTION__);
++                      continue;
++              }
++
++              tty_idx = recv_info->no_tty;
++              dlci = tty2dlci[tty_idx];
++              tty = mux_table[tty_idx];
++              if ((!mux_tty[tty_idx]) || (!tty)) {
++                      TS0710_PRINTK
++                          ("MUX: No application waiting for, free recv_info! tty_idx:%d\n",
++                           tty_idx);
++                      mux_recv_info_flags[tty_idx] = 0;
++                      free_mux_recv_struct(mux_recv_info[tty_idx]);
++                      mux_recv_info[tty_idx] = 0;
++                      ts0710_flow_on(dlci, ts0710);
++                      continue;
++              }
++
++              TS0710_DEBUG("/dev/mux%d recv_info->total is: %d", tty_idx,
++                           recv_info->total);
++
++              if (test_bit(TTY_THROTTLED, &tty->flags)) {
++                      add_post_recv_queue(&post_recv_q, recv_info);
++                      continue;
++              } else if (test_bit(TTY_DONT_FLIP, &tty->flags)) {
++                      post_recv = 1;
++                      add_post_recv_queue(&post_recv_q, recv_info);
++                      continue;
++              }
++
++              flow_control = 0;
++              recv_packet2 = recv_info->mux_packet;
++              while (recv_info->total) {
++                      recv_room = 65535;
++                      if (tty->receive_room)
++                              recv_room = tty->receive_room;
++
++                      if (recv_info->length) {
++                              if (recv_room < recv_info->length) {
++                                      flow_control = 1;
++                                      break;
++                              }
++
++                              /* Put queued data into read buffer of tty */
++                              TS0710_DEBUG
++                                  ("Put queued recv data into read buffer of /dev/mux%d",
++                                   tty_idx);
++                              TS0710_DEBUGHEX(recv_info->data,
++                                              recv_info->length);
++                              (tty->ldisc.receive_buf) (tty, recv_info->data,
++                                                        NULL,
++                                                        recv_info->length);
++                              recv_info->total -= recv_info->length;
++                              recv_info->length = 0;
++                      } else {        /* recv_info->length == 0 */
++                              if ((recv_packet = recv_packet2)) {
++                                      recv_packet2 = recv_packet->next;
++
++                                      if (recv_room < recv_packet->length) {
++                                              flow_control = 1;
++                                              recv_info->mux_packet =
++                                                  recv_packet;
++                                              break;
++                                      }
++
++                                      /* Put queued data into read buffer of tty */
++                                      TS0710_DEBUG
++                                          ("Put queued recv data into read buffer of /dev/mux%d",
++                                           tty_idx);
++                                      TS0710_DEBUGHEX(recv_packet->data,
++                                                      recv_packet->length);
++                                      (tty->ldisc.receive_buf) (tty,
++                                                                recv_packet->
++                                                                data, NULL,
++                                                                recv_packet->
++                                                                length);
++                                      recv_info->total -= recv_packet->length;
++                                      free_mux_recv_packet(recv_packet);
++                              } else {
++                                      TS0710_PRINTK
++                                          ("MUX Error: %s: Should not get here, recv_info->total is:%u \n",
++                                           __FUNCTION__, recv_info->total);
++                              }
++                      }       /* End recv_info->length == 0 */
++              }               /* End while( recv_info->total ) */
++
++              if (!(recv_info->total)) {
++                      /* Important clear */
++                      recv_info->mux_packet = 0;
++
++                      if (recv_info->post_unthrottle) {
++                              /* Do something for post_unthrottle */
++                              ts0710_flow_on(dlci, ts0710);
++                              recv_info->post_unthrottle = 0;
++                      }
++              } else {
++                      add_post_recv_queue(&post_recv_q, recv_info);
++
++                      if (flow_control) {
++                              /* Do something for flow control */
++                              if (recv_info->post_unthrottle) {
++                                      set_bit(TTY_THROTTLED, &tty->flags);
++                                      recv_info->post_unthrottle = 0;
++                              } else {
++                                      ts0710_flow_off(tty, dlci, ts0710);
++                              }
++                      }       /* End if( flow_control ) */
++              }
++      }                       /* End while( (recv_info = recv_info2) ) */
++
++      mux_recv_queue = post_recv_q;
++
++      out:
++      if (post_recv_count_flag) {
++              post_recv_count_flag = 0;
++              for (j = 0; j < TS0710MUX_COUNT_IDX_NUM; j++) {
++                      if (mux_data_count2[j] > 0) {
++                              if (add_count(j, mux_data_count2[j]) == 0) {
++                                      mux_data_count2[j] = 0;
++                              } else {
++                                      post_recv_count_flag = 1;
++                                      post_recv = 1;
++                              }
++                      }
++              }               /* End for (j = 0; j < TS0710MUX_COUNT_IDX_NUM; j++) */
++      }
++      /* End if( post_recv_count_flag ) */
++      if (post_recv)
++              schedule_work(&post_recv_tqueue);
++      clear_bit(RECV_RUNNING, &mux_recv_flags);
++}
++
++/* mux sender, call from serial.c transmit_chars() */
++void mux_sender(void)
++{
++      mux_send_struct *send_info;
++      int chars;
++      __u8 idx;
++
++      chars = mux_chars_in_serial_buffer(COMM_FOR_MUX_TTY);
++      if (!chars) {
++              /* chars == 0 */
++              TS0710_LOG("<[]\n");
++              mux_sched_send();
++              return;
++      }
++
++      idx = mux_send_info_idx;
++      if ((idx < NR_MUXS) && (mux_send_info_flags[idx])) {
++              send_info = mux_send_info[idx];
++              if ((send_info)
++                  && (send_info->filled)
++                  && (send_info->length <=
++                      (TS0710MUX_SERIAL_BUF_SIZE - chars))) {
++
++                      mux_sched_send();
++              }
++      }
++}
++
++static void send_worker(void *private_)
++{
++      ts0710_con *ts0710 = &ts0710_connection;
++      __u8 j;
++      mux_send_struct *send_info;
++      int chars;
++      struct tty_struct *tty;
++      __u8 dlci;
++
++      UNUSED_PARAM(private_);
++
++      TS0710_DEBUG("Enter into send_worker");
++
++      mux_send_info_idx = NR_MUXS;
++
++      if (ts0710->dlci[0].state == FLOW_STOPPED) {
++              TS0710_DEBUG("Flow stopped on all channels\n");
++              return;
++      }
++
++      for (j = 0; j < NR_MUXS; j++) {
++
++              if (!(mux_send_info_flags[j])) {
++                      continue;
++              }
++
++              send_info = mux_send_info[j];
++              if (!send_info) {
++                      continue;
++              }
++
++              if (!(send_info->filled)) {
++                      continue;
++              }
++
++              dlci = tty2dlci[j];
++              if (ts0710->dlci[dlci].state == FLOW_STOPPED) {
++                      TS0710_DEBUG("Flow stopped on channel DLCI: %d\n",
++                                   dlci);
++                      continue;
++              } else if (ts0710->dlci[dlci].state != CONNECTED) {
++                      TS0710_DEBUG("DLCI %d not connected\n", dlci);
++                      send_info->filled = 0;
++                      continue;
++              }
++
++              chars = mux_chars_in_serial_buffer(COMM_FOR_MUX_TTY);
++              if (send_info->length <= (TS0710MUX_SERIAL_BUF_SIZE - chars)) {
++                      TS0710_DEBUG("Send queued UIH for /dev/mux%d", j);
++                      basic_write(ts0710, (__u8 *) send_info->frame,
++                                  send_info->length);
++                      send_info->length = 0;
++                      send_info->filled = 0;
++              } else {
++                      mux_send_info_idx = j;
++                      break;
++              }
++      }                       /* End for() loop */
++
++      /* Queue UIH data to be transmitted */
++      for (j = 0; j < NR_MUXS; j++) {
++
++              if (!(mux_send_info_flags[j])) {
++                      continue;
++              }
++
++              send_info = mux_send_info[j];
++              if (!send_info) {
++                      continue;
++              }
++
++              if (send_info->filled) {
++                      continue;
++              }
++
++              /* Now queue UIH data to send_info->buf */
++
++              if (!mux_tty[j]) {
++                      continue;
++              }
++
++              tty = mux_table[j];
++              if (!tty) {
++                      continue;
++              }
++
++              dlci = tty2dlci[j];
++              if (ts0710->dlci[dlci].state == FLOW_STOPPED) {
++                      TS0710_DEBUG("Flow stopped on channel DLCI: %d\n",
++                                   dlci);
++                      continue;
++              } else if (ts0710->dlci[dlci].state != CONNECTED) {
++                      TS0710_DEBUG("DLCI %d not connected\n", dlci);
++                      continue;
++              }
++
++              if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP))
++                  && tty->ldisc.write_wakeup) {
++                      (tty->ldisc.write_wakeup) (tty);
++              }
++              wake_up_interruptible(&tty->write_wait);
++
++#ifdef SERIAL_HAVE_POLL_WAIT
++              wake_up_interruptible(&tty->poll_wait);
++#endif
++
++              if (send_info->filled) {
++                      if (j < mux_send_info_idx) {
++                              mux_send_info_idx = j;
++                      }
++              }
++      }                       /* End for() loop */
++}
++
++static int get_count(__u8 idx)
++{
++      int ret;
++
++      if (idx > TS0710MUX_COUNT_MAX_IDX) {
++              TS0710_PRINTK("MUX get_count: invalid idx: %d!\n", idx);
++              return -1;
++      }
++
++      down(&mux_data_count_mutex[idx]);
++      ret = mux_data_count[idx];
++      up(&mux_data_count_mutex[idx]);
++
++      return ret;
++}
++
++static int set_count(__u8 idx, int count)
++{
++      if (idx > TS0710MUX_COUNT_MAX_IDX) {
++              TS0710_PRINTK("MUX set_count: invalid idx: %d!\n", idx);
++              return -1;
++      }
++      if (count < 0) {
++              TS0710_PRINTK("MUX set_count: invalid count: %d!\n", count);
++              return -1;
++      }
++
++      down(&mux_data_count_mutex[idx]);
++      mux_data_count[idx] = count;
++      up(&mux_data_count_mutex[idx]);
++
++      return 0;
++}
++
++static int add_count(__u8 idx, int count)
++{
++      if (idx > TS0710MUX_COUNT_MAX_IDX) {
++              TS0710_PRINTK("MUX add_count: invalid idx: %d!\n", idx);
++              return -1;
++      }
++      if (count <= 0) {
++              TS0710_PRINTK("MUX add_count: invalid count: %d!\n", count);
++              return -1;
++      }
++
++      if (down_trylock(&mux_data_count_mutex[idx]))
++              return -1;
++      mux_data_count[idx] += count;
++      up(&mux_data_count_mutex[idx]);
++
++      return 0;
++}
++
++ssize_t file_proc_read(struct file * file, char *buf, size_t size,
++                     loff_t * ppos)
++{
++      gprs_bytes gprsData[TS0710MUX_GPRS_SESSION_MAX];
++      int bufLen = sizeof(gprs_bytes) * TS0710MUX_GPRS_SESSION_MAX;
++
++      UNUSED_PARAM(file);
++      UNUSED_PARAM(size);
++      UNUSED_PARAM(ppos);
++
++      gprsData[0].recvBytes = get_count(TS0710MUX_GPRS1_RECV_COUNT_IDX);
++      gprsData[0].sentBytes = get_count(TS0710MUX_GPRS1_SEND_COUNT_IDX);
++      gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].recvBytes =
++          get_count(TS0710MUX_GPRS2_RECV_COUNT_IDX);
++      gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].sentBytes =
++          get_count(TS0710MUX_GPRS2_SEND_COUNT_IDX);
++
++      copy_to_user(buf, gprsData, bufLen);
++
++      return bufLen;
++}
++
++ssize_t file_proc_write(struct file * file, const char *buf, size_t count,
++                      loff_t * ppos)
++{
++      gprs_bytes gprsData[TS0710MUX_GPRS_SESSION_MAX];
++      int bufLen = sizeof(gprs_bytes) * TS0710MUX_GPRS_SESSION_MAX;
++
++      UNUSED_PARAM(file);
++      UNUSED_PARAM(count);
++      UNUSED_PARAM(ppos);
++
++      memset(gprsData, 0, bufLen);
++
++      copy_from_user(gprsData, buf, bufLen);
++
++      set_count(TS0710MUX_GPRS1_RECV_COUNT_IDX, gprsData[0].recvBytes);
++      set_count(TS0710MUX_GPRS1_SEND_COUNT_IDX, gprsData[0].sentBytes);
++      set_count(TS0710MUX_GPRS2_RECV_COUNT_IDX,
++                gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].recvBytes);
++      set_count(TS0710MUX_GPRS2_SEND_COUNT_IDX,
++                gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].sentBytes);
++
++      return bufLen;
++}
++
++static void gprs_proc_init(void)
++{
++      gprs_proc_file =
++          create_proc_entry("gprsbytes", S_IRUSR | S_IWUSR, NULL);
++      gprs_proc_file->proc_fops = &file_proc_operations;
++}
++
++static void gprs_proc_exit(void)
++{
++      remove_proc_entry("gprsbytes", gprs_proc_file);
++}
++
++static int __init mux_init(void)
++{
++      __u8 j;
++
++      if (COMM_FOR_MUX_DRIVER == NULL) {
++
++#ifdef USB_FOR_MUX
++              panic("please install IPC-USB first\n");
++#else
++              panic("please install ttyS0 first\n");
++#endif
++
++      }
++
++      ts0710_init();
++
++      for (j = 0; j < NR_MUXS; j++) {
++              mux_send_info_flags[j] = 0;
++              mux_send_info[j] = 0;
++              mux_recv_info_flags[j] = 0;
++              mux_recv_info[j] = 0;
++      }
++      mux_send_info_idx = NR_MUXS;
++      mux_recv_queue = NULL;
++      mux_recv_flags = 0;
++
++      for (j = 0; j < TS0710MUX_COUNT_IDX_NUM; j++) {
++              mux_data_count[j] = 0;
++              mux_data_count2[j] = 0;
++              init_MUTEX(&mux_data_count_mutex[j]);
++      }
++      post_recv_count_flag = 0;
++
++      INIT_WORK(&send_tqueue, send_worker, NULL);
++      INIT_WORK(&receive_tqueue, receive_worker, NULL);
++      INIT_WORK(&post_recv_tqueue, post_recv_worker, NULL);
++
++      memset(&mux_driver, 0, sizeof(struct tty_driver));
++      memset(&mux_tty, 0, sizeof(mux_tty));
++      mux_driver.magic = TTY_DRIVER_MAGIC;
++      mux_driver.driver_name = "ts0710mux";
++      mux_driver.name = "ts0710mux";
++      mux_driver.major = TS0710MUX_MAJOR;
++      mux_driver.minor_start = TS0710MUX_MINOR_START;
++      mux_driver.num = NR_MUXS;
++      mux_driver.type = TTY_DRIVER_TYPE_SERIAL;
++      mux_driver.subtype = SERIAL_TYPE_NORMAL;
++      mux_driver.init_termios = tty_std_termios;
++      mux_driver.init_termios.c_iflag = 0;
++      mux_driver.init_termios.c_oflag = 0;
++      mux_driver.init_termios.c_cflag = B38400 | CS8 | CREAD;
++      mux_driver.init_termios.c_lflag = 0;
++      mux_driver.flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
++
++      mux_driver.ttys = mux_table;
++      mux_driver.termios = mux_termios;
++      mux_driver.termios_locked = mux_termios_locked;
++//  mux_driver.driver_state = mux_state;
++      mux_driver.other = NULL;
++
++      mux_driver.open = mux_open;
++      mux_driver.close = mux_close;
++      mux_driver.write = mux_write;
++      mux_driver.write_room = mux_write_room;
++      mux_driver.flush_buffer = mux_flush_buffer;
++      mux_driver.chars_in_buffer = mux_chars_in_buffer;
++      mux_driver.throttle = mux_throttle;
++      mux_driver.unthrottle = mux_unthrottle;
++      mux_driver.ioctl = mux_ioctl;
++      mux_driver.owner = THIS_MODULE;
++
++      if (tty_register_driver(&mux_driver))
++              panic("Couldn't register mux driver");
++
++      COMM_MUX_DISPATCHER = mux_dispatcher;
++      COMM_MUX_SENDER = mux_sender;
++
++      gprs_proc_init();
++
++      return 0;
++}
++
++static void __exit mux_exit(void)
++{
++      __u8 j;
++
++      COMM_MUX_DISPATCHER = NULL;
++      COMM_MUX_SENDER = NULL;
++
++      gprs_proc_exit();
++
++      mux_send_info_idx = NR_MUXS;
++      mux_recv_queue = NULL;
++      for (j = 0; j < NR_MUXS; j++) {
++              if ((mux_send_info_flags[j]) && (mux_send_info[j])) {
++                      kfree(mux_send_info[j]);
++              }
++              mux_send_info_flags[j] = 0;
++              mux_send_info[j] = 0;
++
++              if ((mux_recv_info_flags[j]) && (mux_recv_info[j])) {
++                      free_mux_recv_struct(mux_recv_info[j]);
++              }
++              mux_recv_info_flags[j] = 0;
++              mux_recv_info[j] = 0;
++      }
++
++      if (tty_unregister_driver(&mux_driver))
++              panic("Couldn't unregister mux driver");
++}
++
++module_init(mux_init);
++module_exit(mux_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Harald Welte <laforge@openezx.org>");
++MODULE_DESCRIPTION("TS 07.10 Multiplexer");
+Index: linux-2.6.24/drivers/char/ts0710_mux.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/char/ts0710_mux.h
+@@ -0,0 +1,103 @@
++/*
++ * mux_macro.h
++ *
++ * Copyright (C) 2002 2005 Motorola
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ *
++ *  11/18/2002  (Motorola) - Initial version
++ *
++ */
++
++/*
++* This header file should be included by both MUX and other applications
++* which access MUX device files. It gives the additional macro definitions
++* shared between MUX and applications.
++*/
++
++/* MUX DLCI(Data Link Connection Identifier) Configuration */
++/*
++*  DLCI     Service
++*   0    Control Channel
++*   1    Voice Call & Network-related
++*   2    SMS MO
++*   3    SMS MT
++*   4    Phonebook & related
++*   5    MISC
++*   6    CSD/FAX
++*   7    GPRS1
++*   8    GPRS2
++*   9    Logger CMD
++*   10   Logger Data
++*   11   Test CMD
++*   12   AGPS
++*   13   Net Monitor
++*/
++
++/* Mapping between DLCI and MUX device files */
++/*
++*   File Name   Minor  DLCI  AT Command/Data
++*   /dev/mux0     0     1     AT Command
++*   /dev/mux1     1     2     AT Command
++*   /dev/mux2     2     3     AT Command
++*   /dev/mux3     3     4     AT Command
++*   /dev/mux4     4     5     AT Command
++*   /dev/mux5     5     6     AT Command
++*   /dev/mux6     6     7     AT Command
++*   /dev/mux7     7     8     AT Command
++*   /dev/mux8     8     6     Data
++*   /dev/mux9     9     7     Data
++*   /dev/mux10    10    8     Data
++*   /dev/mux11    11    9     Data
++*   /dev/mux12    12    10    Data
++*   /dev/mux13    13    11    Data
++*   /dev/mux14    14    12    Data
++*   /dev/mux15    15    13    Data
++*/
++
++#define MUX_CMD_FILE_VOICE_CALL   "/dev/mux0"
++#define MUX_CMD_FILE_SMS_MO       "/dev/mux1"
++#define MUX_CMD_FILE_SMS_MT       "/dev/mux2"
++#define MUX_CMD_FILE_PHONEBOOK    "/dev/mux3"
++#define MUX_CMD_FILE_MISC         "/dev/mux4"
++#define MUX_CMD_FILE_CSD          "/dev/mux5"
++#define MUX_CMD_FILE_GPRS1        "/dev/mux6"
++#define MUX_CMD_FILE_GPRS2        "/dev/mux7"
++
++#define MUX_DATA_FILE_CSD         "/dev/mux8"
++#define MUX_DATA_FILE_GPRS1       "/dev/mux9"
++#define MUX_DATA_FILE_GPRS2       "/dev/mux10"
++#define MUX_DATA_FILE_LOGGER_CMD  "/dev/mux11"
++#define MUX_DATA_FILE_LOGGER_DATA "/dev/mux12"
++#define MUX_DATA_FILE_TEST_CMD    "/dev/mux13"
++#define MUX_DATA_FILE_AGPS        "/dev/mux14"
++#define MUX_DATA_FILE_NET_MONITOR "/dev/mux15"
++
++#define NUM_MUX_CMD_FILES 8
++#define NUM_MUX_DATA_FILES 8
++#define NUM_MUX_FILES ( NUM_MUX_CMD_FILES  +  NUM_MUX_DATA_FILES )
++
++/* Special ioctl() upon a MUX device file for hanging up a call */
++#define TS0710MUX_IO_MSC_HANGUP 0x54F0
++
++/* Special ioctl() upon a MUX device file for MUX loopback test */
++#define TS0710MUX_IO_TEST_CMD 0x54F1
++
++/* Special Error code might be return from write() to a MUX device file  */
++#define EDISCONNECTED 900     /* Logical data link is disconnected */
++
++/* Special Error code might be return from open() to a MUX device file  */
++#define EREJECTED 901         /* Logical data link connection request is rejected */
+Index: linux-2.6.24/drivers/char/ts0710_mux_usb.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/char/ts0710_mux_usb.c
+@@ -0,0 +1,868 @@
++/*
++ * linux/drivers/usb/ipcusb.c
++ *
++ * Implementation of a ipc driver based Intel's Bulverde USB Host
++ * Controller.
++ *
++ * Copyright (C) 2003-2005 Motorola
++ * Copyright (C) 2006 Harald Welte <laforge@openezx.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ *  2003-Nov-03 - (Motorola) created
++ *  2004-Feb-20 - (Motorola) Add Power Manager codes
++ *  2004-Apr-14 - (Motorola) Update Suspend/Resume codes
++ *  2004-May-10 - (Motorola) Add unlink_urbs codes and do some updates of send
++ *                         out urb sequence
++ *  2006-Jun-22 - (Harald Welte) port to Linux 2.6.x
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/list.h>
++#include <linux/errno.h>
++#include <asm/uaccess.h>
++#include <asm/hardware.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch-pxa/pxa-regs.h>
++#include <asm/arch-pxa/ezx.h>
++#include <linux/slab.h>
++#include <linux/miscdevice.h>
++#include <linux/init.h>
++#include <linux/timer.h>
++#include <linux/delay.h>
++#include <linux/sched.h>
++#include <linux/tty.h>
++#include <linux/tty_driver.h>
++#include <linux/tty_flip.h>
++#include <linux/circ_buf.h>
++#include <linux/usb.h>
++
++#include "ts0710_mux_usb.h"
++
++/*Macro defined for this driver*/
++#define DRIVER_VERSION "1.0alpha1"
++#define DRIVER_AUTHOR "Motorola / Harald Welte <laforge@openezx.org>"
++#define DRIVER_DESC "USB IPC Driver (TS07.10 lowlevel)"
++#define MOTO_IPC_VID          0x22b8
++#define MOTO_IPC_PID          0x3006
++#define IBUF_SIZE             32              /*urb size*/
++#define IPC_USB_XMIT_SIZE     1024
++#define IPC_URB_SIZE          32
++#define IPC_USB_WRITE_INIT    0
++#define IPC_USB_WRITE_XMIT    1
++#define IPC_USB_PROBE_READY   3
++#define IPC_USB_PROBE_NOT_READY       4
++#define DBG_MAX_BUF_SIZE      1024
++#define ICL_EVENT_INTERVAL    (HZ)
++#undef BVD_DEBUG
++
++#define IS_EP_BULK(ep)  ((ep).bmAttributes == USB_ENDPOINT_XFER_BULK ? 1 : 0)
++#define IS_EP_BULK_IN(ep) (IS_EP_BULK(ep) && ((ep).bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
++#define IS_EP_BULK_OUT(ep) (IS_EP_BULK(ep) && ((ep).bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
++/*End defined macro*/
++
++/*global values defined*/
++static struct usb_driver              usb_ipc_driver;
++static struct timer_list              ipcusb_timer;
++static struct timer_list              suspend_timer;
++static struct timer_list              wakeup_timer;
++static struct tty_struct              ipcusb_tty;             /* the coresponding tty struct, we just use flip buffer here. */
++static struct tty_driver              ipcusb_tty_driver;      /* the coresponding tty driver, we just use write and chars in buff here*/
++struct tty_driver *usb_for_mux_driver = NULL;
++struct tty_struct *usb_for_mux_tty = NULL;
++void (*usb_mux_dispatcher)(struct tty_struct *tty) = NULL;
++void (*usb_mux_sender)(void) = NULL;
++void (*ipcusb_ap_to_bp)(unsigned char*, int) = NULL;
++void (*ipcusb_bp_to_ap)(unsigned char*, int) = NULL;
++EXPORT_SYMBOL(usb_for_mux_driver);
++EXPORT_SYMBOL(usb_for_mux_tty);
++EXPORT_SYMBOL(usb_mux_dispatcher);
++EXPORT_SYMBOL(usb_mux_sender);
++EXPORT_SYMBOL(ipcusb_ap_to_bp);
++EXPORT_SYMBOL(ipcusb_bp_to_ap);
++static int sumbit_times = 0;
++static int callback_times = 0;
++//static unsigned long last_jiff = 0;
++extern int usbh_finished_resume;
++/*end global values defined*/
++
++MODULE_AUTHOR(DRIVER_AUTHOR);
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_LICENSE("GPL");
++
++#ifdef BVD_DEBUG
++#define bvd_dbg(format, arg...) printk(__FILE__ ": " format "\n" , ## arg)
++#else
++#define bvd_dbg(format, arg...) do {} while (0)
++#endif
++
++/* USB device context */
++typedef struct {
++      struct list_head list;
++      int size;
++      char *body;
++} buf_list_t;
++
++struct ipc_usb_data {
++      u_int8_t                write_finished_flag;
++      u_int8_t                write_flag,
++                              ipc_flag,
++                              suspend_flag;
++      struct usb_device       *ipc_dev;
++      struct urb              readurb_mux,
++                              writeurb_mux,
++                              writeurb_dsplog;
++      char                    *obuf, *ibuf;
++      int                     writesize;      /* max packet size for the
++                                                 output bulk endpoint *
++                                                 transfer buffers */
++
++      struct circ_buf         xmit;           /* write cric bufffer */
++      struct list_head        in_buf_list;
++      char                    bulk_in_ep_mux,
++                              bulk_out_ep_mux,
++                              bulk_in_ep_dsplog;
++      unsigned int            ifnum;
++
++      struct tasklet_struct   bh,
++                              bh_bp;
++
++      spinlock_t              lock;
++};
++
++struct ipc_usb_data *bvd_ipc;
++
++#ifdef BVD_DEBUG
++static void bvd_dbg_hex(__u8 *buf, int len)
++{
++      static unsigned char tbuf[DBG_MAX_BUF_SIZE];
++      int i, c;
++
++      if (len <= 0)
++              return;
++
++      c = 0;
++      for (i=0; (i < len) && (c < (DBG_MAX_BUF_SIZE - 3)); i++) {
++              sprintf(&tbuf[c], "%02x ",buf[i]);
++              c += 3;
++      }
++      tbuf[c] = 0;
++
++      printk("%s: %s\n", __FUNCTION__, tbuf);
++}
++#else
++#define bvd_dbg_hex(buf, len)
++#endif
++
++static int unlink_urbs(struct urb *urb)
++{
++      unsigned long flags;
++      int retval;
++
++      spin_lock_irqsave(&bvd_ipc->lock, flags);
++
++      retval = usb_unlink_urb(urb);
++      if (retval != -EINPROGRESS && retval != 0)
++              printk("unlink urb err, %d", retval);
++
++      spin_unlock_irqrestore(&bvd_ipc->lock, flags);
++      return retval;
++}
++
++static void append_to_inbuf_list(struct urb *urb)
++{
++      buf_list_t *inbuf;
++      int count = urb->actual_length;
++
++      inbuf = kmalloc(sizeof(buf_list_t), GFP_KERNEL);
++      if (!inbuf) {
++              printk("append_to_inbuf_list: (%d) out of memory!\n",
++                      sizeof(buf_list_t));
++              return;
++      }
++
++      inbuf->size = count;
++      inbuf->body = kmalloc(sizeof(char)*count, GFP_KERNEL);
++      if (!inbuf->body) {
++              kfree(inbuf);
++              printk("append_to_inbuf_list: (%d) out of memory!\n",
++                      sizeof(char)*count);
++              return;
++      }
++      memcpy(inbuf->body, (unsigned char*)urb->transfer_buffer, count);
++      list_add_tail(&inbuf->list, &bvd_ipc->in_buf_list);
++}
++
++static void ipcusb_timeout(unsigned long data)
++{
++      struct tty_struct *tty = &ipcusb_tty;
++      struct urb *urb = (struct urb *)data;
++
++      bvd_dbg("ipcusb_timeout***");
++
++      while (!(list_empty(&bvd_ipc->in_buf_list))) {
++              int count;
++              buf_list_t *inbuf;
++              struct list_head *ptr = NULL;
++
++              ptr = bvd_ipc->in_buf_list.next;
++              inbuf = list_entry (ptr, buf_list_t, list);
++              count = inbuf->size;
++              if (tty_insert_flip_string(tty, inbuf->body, count) >= count) {
++                      list_del(ptr);
++                      kfree(inbuf->body);
++                      inbuf->body = NULL;
++                      kfree(inbuf);
++              } else {
++                      bvd_dbg("ipcusb_timeout: bvd_ipc->in_buf_list empty!");
++                      break;
++              }
++      }
++
++      if (usb_mux_dispatcher)
++              usb_mux_dispatcher(tty);        /**call Liu changhui's func.**/
++
++      if (list_empty(&bvd_ipc->in_buf_list)) {
++              urb->actual_length = 0;
++              urb->dev = bvd_ipc->ipc_dev;
++              if (usb_submit_urb(urb, GFP_ATOMIC))
++                      bvd_dbg("ipcusb_timeout: failed resubmitting read urb");
++              bvd_dbg("ipcusb_timeout: resubmited read urb");
++      } else {
++              ipcusb_timer.data = (unsigned long)urb;
++              mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
++      }
++}
++
++static void usb_ipc_read_bulk(struct urb *urb, struct pt_regs *regs)
++{
++      buf_list_t *inbuf;
++      int count = urb->actual_length;
++      struct tty_struct *tty = &ipcusb_tty;
++
++      bvd_dbg("usb_ipc_read_bulk: begining!");
++      if (urb->status)
++              printk("nonzero read bulk status received: %d\n", urb->status);
++
++      bvd_dbg("usb_ipc_read_bulk: urb->actual_length=%d", urb->actual_length);
++      bvd_dbg("usb_ipc_read_bulk: urb->transfer_buffer:");
++
++      bvd_dbg_hex((unsigned char*)urb->transfer_buffer, urb->actual_length);
++
++      if (count > 0 && ((*ipcusb_bp_to_ap) != NULL))
++              (*ipcusb_bp_to_ap)(urb->transfer_buffer, urb->actual_length);
++
++      if (!(list_empty(&bvd_ipc->in_buf_list))) {
++              int need_mux = 0;
++
++              bvd_dbg("usb_ipc_read_bulk: some urbs in_buf_list");
++              if (count > 0) {
++                      bvd_ipc->suspend_flag = 1;
++                      append_to_inbuf_list(urb); /* append the current received urb */
++#if 0
++                      if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
++                      {
++                              last_jiff = jiffies;
++                              queue_apm_event(KRNL_ICL, NULL);
++                      }
++#endif
++              }
++
++              while (!(list_empty(&bvd_ipc->in_buf_list))) {
++                      struct list_head* ptr = NULL;
++                      ptr = bvd_ipc->in_buf_list.next;
++                      inbuf = list_entry(ptr, buf_list_t, list);
++                      count = inbuf->size;
++                      need_mux = 1;
++
++                      tty_insert_flip_string(tty, inbuf->body, count);
++
++                      list_del(ptr);
++                      kfree(inbuf->body);
++                      inbuf->body = NULL;
++                      kfree(inbuf);
++              }
++
++              if (usb_mux_dispatcher && need_mux)
++                      usb_mux_dispatcher(tty); /* call Liu changhui's func. */
++
++              if (list_empty(&bvd_ipc->in_buf_list)) {
++                      urb->actual_length = 0;
++                      urb->dev = bvd_ipc->ipc_dev;
++                      if (usb_submit_urb(urb, GFP_ATOMIC))
++                              bvd_dbg("usb_ipc_read_bulk: "
++                                      "failed resubmitting read urb");
++                      bvd_dbg("usb_ipc_read_bulk: resubmited read urb");
++              } else {
++                      ipcusb_timer.data = (unsigned long)urb;
++                      mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
++              }
++      } else if (count > 0) {
++              bvd_dbg("usb_ipc_read_bulk: no urbs in_buf_list");
++              bvd_ipc->suspend_flag = 1;
++
++              if (tty_insert_flip_string(tty, urb->transfer_buffer,
++                                         count) < count) {
++                      bvd_ipc->suspend_flag = 1;
++                      append_to_inbuf_list(urb);
++                      ipcusb_timer.data = (unsigned long)urb;
++                      mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000));
++#if 0
++                      if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
++                      {
++                              last_jiff = jiffies;
++                              queue_apm_event(KRNL_ICL, NULL);
++                      }
++#endif
++              }
++
++              if (usb_mux_dispatcher)
++                      usb_mux_dispatcher(tty); /* call Liu changhui's func. */
++
++              urb->actual_length = 0;
++              urb->dev = bvd_ipc->ipc_dev;
++              if (usb_submit_urb(urb, GFP_ATOMIC))
++                      bvd_dbg("failed resubmitting read urb");
++#if 0
++              if(jiffies - last_jiff > ICL_EVENT_INTERVAL)
++              {
++                      last_jiff = jiffies;
++                      queue_apm_event(KRNL_ICL, NULL);
++              }
++#endif
++              bvd_dbg("usb_ipc_read_bulk: resubmited read urb");
++      }
++
++      bvd_dbg("usb_ipc_read_bulk: completed!!!");
++}
++
++static void usb_ipc_write_bulk(struct urb *urb, struct pt_regs *regs)
++{
++      callback_times++;
++      bvd_ipc->write_finished_flag = 1;
++
++      bvd_dbg("usb_ipc_write_bulk: begining!");
++      //printk("%s: write_finished_flag=%d\n", __FUNCTION__, bvd_ipc->write_finished_flag);
++
++      if (urb->status)
++              printk("nonzero write bulk status received: %d\n", urb->status);
++
++      if (usb_mux_sender)
++              usb_mux_sender();               /**call Liu changhui's func**/
++
++      //printk("usb_ipc_write_bulk: mark ipcusb_softint!\n");
++      tasklet_schedule(&bvd_ipc->bh);
++
++      bvd_dbg("usb_ipc_write_bulk: finished!");
++}
++
++static void wakeup_timeout(unsigned long data)
++{
++      GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
++      bvd_dbg("wakup_timeout: send GPIO_MCU_INT_SW signal!");
++}
++
++static void suspend_timeout(unsigned long data)
++{
++      if (bvd_ipc->suspend_flag == 1) {
++              bvd_ipc->suspend_flag = 0;
++              mod_timer(&suspend_timer, jiffies+(5000*HZ/1000));
++              bvd_dbg("suspend_timeout: add the suspend timer again");
++      } else {
++              unlink_urbs(&bvd_ipc->readurb_mux);
++              UHCRHPS3 = 0x4;
++              mdelay(40);
++              bvd_dbg("suspend_timeout: send SUSPEND signal! UHCRHPS3=0x%x",
++                      UHCRHPS3);
++      }
++}
++
++static void ipcusb_xmit_data(void)
++{
++      int c, count = IPC_URB_SIZE;
++      int result = 0;
++      int buf_flag = 0;
++      int buf_num = 0;
++
++      //printk("%s: sumbit_times=%d, callback_times=%d\n", __FUNCTION__, sumbit_times, callback_times);
++      if (bvd_ipc->write_finished_flag == 0)
++              return;
++
++      while (1) {
++              c = CIRC_CNT_TO_END(bvd_ipc->xmit.head, bvd_ipc->xmit.tail,
++                                  IPC_USB_XMIT_SIZE);
++              if (count < c)
++                      c = count;
++              if (c <= 0)
++                      break;
++
++              memcpy(bvd_ipc->obuf+buf_num,
++                     bvd_ipc->xmit.buf + bvd_ipc->xmit.tail, c);
++              buf_flag = 1;
++              bvd_ipc->xmit.tail = ((bvd_ipc->xmit.tail + c)
++                                              & (IPC_USB_XMIT_SIZE-1));
++              count -= c;
++              buf_num += c;
++      }
++
++      if (buf_num == 0) {
++              bvd_dbg("ipcusb_xmit_data: buf_num=%d, add suspend_timer",
++                      buf_num);
++              bvd_ipc->suspend_flag = 0;
++              mod_timer(&suspend_timer, jiffies+(5000*HZ/1000));
++      }
++
++      bvd_dbg("ipcusb_xmit_data: buf_num=%d", buf_num);
++      bvd_dbg("ipcusb_xmit_data: bvd_ipc->obuf: ");
++
++      bvd_dbg_hex((bvd_ipc->obuf)-buf_num, buf_num);
++
++      if (buf_flag) {
++              bvd_ipc->writeurb_mux.transfer_buffer_length = buf_num;
++              bvd_dbg("ipcusb_xmit_data: copy data to write urb finished! ");
++
++              if ((UHCRHPS3 & 0x4) == 0x4) {
++                      static int ret;
++                      int time = 0;
++
++                      /* if BP sleep, wake up BP first */
++                      pxa_gpio_mode(GPIO_IN | 41);
++                      if (GPIO_is_high(41)) {
++                              if (GPIO_is_high(GPIO_MCU_INT_SW))
++                                      GPCR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
++                              else
++                                      GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
++
++                              time = jiffies;
++                              while (GPIO_is_high(41) && (jiffies < (time+HZ)));
++
++                              if (GPIO_is_high(41)) {
++                                      printk("%s: Wakeup BP timeout! BP state is %d\n",
++                                              __FUNCTION__, GPIO_is_high(41));
++                              }
++                              if (GPIO_is_high(GPIO_MCU_INT_SW))
++                                      GPCR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
++                              else
++                                      GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW);
++                      }
++
++                      /* Resume BP */
++                      UHCRHPS3 = 0x8;
++                      mdelay(40);
++                      bvd_dbg("ipcusb_xmit_data: Send RESUME signal! UHCRHPS3=0x%x",
++                               UHCRHPS3);
++                      /*send IN token*/
++                      bvd_ipc->readurb_mux.actual_length = 0;
++                      bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;
++                      if (ret = usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC))
++                              printk("ipcusb_xmit_data: usb_submit_urb(read mux bulk)"
++                                      "failed! status=%d\n", ret);
++                      bvd_dbg("ipcusb_xmit_data: Send a IN token successfully!");
++              }
++
++              sumbit_times++;
++              bvd_ipc->write_finished_flag = 0;
++              //printk("%s: clear write_finished_flag:%d\n", __FUNCTION__, bvd_ipc->write_finished_flag);
++              bvd_ipc->writeurb_mux.dev = bvd_ipc->ipc_dev;
++              if (result = usb_submit_urb(&bvd_ipc->writeurb_mux, GFP_ATOMIC))
++                      warn("ipcusb_xmit_data: funky result! result=%d\n", result);
++
++              bvd_dbg("ipcusb_xmit_data: usb_submit_urb finished! result:%d", result);
++
++      }
++}
++
++static void usbipc_bh_func(unsigned long param)
++{
++      ipcusb_xmit_data();
++}
++
++extern void get_halted_bit(void);
++
++static void usbipc_bh_bp_func(unsigned long param)
++{
++      if ((UHCRHPS3 & 0x4) == 0x4) {
++              UHCRHPS3 = 0x8;
++              mdelay(40);
++              bvd_dbg("ipcusb_softint_send_readurb: Send RESUME signal! "
++                      "UHCRHPS3=0x%x", UHCRHPS3);
++      }
++      if (bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) {
++              get_halted_bit();
++
++              /*send a IN token*/
++              bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;
++              if (usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC)) {
++                      bvd_dbg("ipcusb_softint_send_readurb: "
++                              "usb_submit_urb(read mux bulk) failed!");
++              }
++              bvd_dbg("ipcusb_softint_send_readurb: Send a IN token successfully!");
++              bvd_ipc->suspend_flag = 0;
++              bvd_dbg("ipcusb_softint_send_readurb: add suspend_timer");
++              mod_timer(&suspend_timer, jiffies+(5000*HZ/1000));
++      }
++}
++
++static int usb_ipc_write(struct tty_struct *tty,
++                       const unsigned char *buf, int count)
++{
++      int c, ret = 0;
++
++      bvd_dbg("usb_ipc_write: count=%d, buf: ", count);
++      bvd_dbg_hex(buf, count);
++
++      if (count <= 0)
++              return 0;
++
++      if (*ipcusb_ap_to_bp != NULL)
++              (*ipcusb_ap_to_bp)(buf, count);
++
++      bvd_ipc->suspend_flag = 1;
++
++      if ((bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) &&
++          (bvd_ipc->xmit.head == bvd_ipc->xmit.tail)) {
++              bvd_dbg("usb_ipc_write: set write_flag");
++              bvd_ipc->write_flag = IPC_USB_WRITE_XMIT;
++      }
++
++      while (1) {
++              c = CIRC_SPACE_TO_END(bvd_ipc->xmit.head,
++                                    bvd_ipc->xmit.tail, IPC_USB_XMIT_SIZE);
++              if (count < c)
++                      c = count;
++              if (c <= 0)
++                      break;
++
++              memcpy(bvd_ipc->xmit.buf + bvd_ipc->xmit.head, buf, c);
++              bvd_ipc->xmit.head = ((bvd_ipc->xmit.head + c)
++                                              & (IPC_USB_XMIT_SIZE-1));
++              buf += c;
++              count -= c;
++              ret += c;
++      }
++      bvd_dbg("usb_ipc_write: ret=%d, bvd_ipc->xmit.buf: ", ret);
++
++      bvd_dbg_hex(bvd_ipc->xmit.buf, ret);
++
++      if (bvd_ipc->write_flag == IPC_USB_WRITE_XMIT) {
++              bvd_ipc->write_flag = IPC_USB_WRITE_INIT;
++              bvd_dbg("usb_ipc_write: mark ipcusb_softint");
++              tasklet_schedule(&bvd_ipc->bh);
++      }
++
++      bvd_dbg("usb_ipc_write: ret=%d\n", ret);
++      return ret;
++}
++
++static int usb_ipc_chars_in_buffer(struct tty_struct *tty)
++{
++      return CIRC_CNT(bvd_ipc->xmit.head, bvd_ipc->xmit.tail, IPC_USB_XMIT_SIZE);
++}
++
++void usb_send_readurb(void)
++{
++      //printk("usb_send_readurb: begining!UHCRHPS3=0x%x, usbh_finished_resume=%d\n", UHCRHPS3, usbh_finished_resume);
++
++      if (usbh_finished_resume == 0)
++              return;
++
++      tasklet_schedule(&bvd_ipc->bh_bp);
++}
++
++static int usb_ipc_probe(struct usb_interface *intf,
++                       const struct usb_device_id *id)
++{
++      struct usb_device *usbdev = interface_to_usbdev(intf);
++      struct usb_config_descriptor *ipccfg;
++      struct usb_interface_descriptor *interface;
++      struct usb_endpoint_descriptor *endpoint;
++      int ep_cnt, readsize, writesize;
++      char have_bulk_in_mux, have_bulk_out_mux;
++
++      bvd_dbg("usb_ipc_probe: vendor id 0x%x, device id 0x%x",
++              usbdev->descriptor.idVendor, usbdev->descriptor.idProduct);
++
++      if ((usbdev->descriptor.idVendor != MOTO_IPC_VID) ||
++          (usbdev->descriptor.idProduct != MOTO_IPC_PID))
++              return -ENODEV;
++
++      /* a2590c : dsplog interface is not supported by this driver */
++      if (intf->minor == 2)   /* dsplog interface number is 2 */
++              return -1;
++
++      bvd_dbg("usb_ipc_probe: USB dev address:%p", usbdev);
++      bvd_dbg("usb_ipc_probe: ifnum:%u", intf->minor);
++
++      ipccfg = &usbdev->actconfig->desc;
++      bvd_dbg("usb_ipc_prob: config%d", ipccfg->bConfigurationValue);
++      bvd_dbg("usb_ipc_prob: bNumInterfaces = %d", ipccfg->bNumInterfaces);
++
++      /* After this point we can be a little noisy about what we are trying
++       * to configure, hehe.  */
++      if (usbdev->descriptor.bNumConfigurations != 1) {
++              info("usb_ipc_probe: Only one device configuration "
++                   "is supported.");
++              return -1;
++      }
++
++      if (usbdev->config[0].desc.bNumInterfaces != 3) {
++              info("usb_ipc_probe: Only three device interfaces are "
++                   "supported.");
++              return -1;
++      }
++
++      interface = &intf->cur_altsetting->desc;
++      endpoint = &intf->cur_altsetting->endpoint[0].desc;
++      /* Start checking for two bulk endpoints or ... FIXME: This is a future
++       * enhancement...*/
++      bvd_dbg("usb_ipc_probe: Number of Endpoints:%d",
++              (int) interface->bNumEndpoints);
++      if (interface->bNumEndpoints != 2) {
++              info("usb_ipc_probe: Only two endpoints supported.");
++              return -1;
++      }
++
++      ep_cnt = have_bulk_in_mux = have_bulk_out_mux = 0;
++
++      bvd_dbg("usb_ipc_probe: endpoint[0] is:%x",
++              (&endpoint[0])->bEndpointAddress);
++      bvd_dbg("usb_ipc_probe: endpoint[1] is:%x ",
++              (&endpoint[1])->bEndpointAddress);
++
++      while (ep_cnt < interface->bNumEndpoints) {
++
++              if (!have_bulk_in_mux && IS_EP_BULK_IN(endpoint[ep_cnt])) {
++                      bvd_dbg("usb_ipc_probe: bEndpointAddress(IN) is:%x ",
++                              (&endpoint[ep_cnt])->bEndpointAddress);
++                      have_bulk_in_mux =
++                                      (&endpoint[ep_cnt])->bEndpointAddress;
++                      readsize = (&endpoint[ep_cnt])->wMaxPacketSize;
++                      bvd_dbg("usb_ipc_probe: readsize=%d", readsize);
++                      ep_cnt++;
++                      continue;
++              }
++
++              if (!have_bulk_out_mux && IS_EP_BULK_OUT(endpoint[ep_cnt])) {
++                      bvd_dbg("usb_ipc_probe: bEndpointAddress(OUT) is:%x ",
++                              (&endpoint[ep_cnt])->bEndpointAddress);
++                      have_bulk_out_mux =
++                              (&endpoint[ep_cnt])->bEndpointAddress;
++                      writesize = (&endpoint[ep_cnt])->wMaxPacketSize;
++                      bvd_dbg("usb_ipc_probe: writesize=%d", writesize);
++                      ep_cnt++;
++                      continue;
++              }
++
++              info("usb_ipc_probe: Undetected endpoint ^_^ ");
++              /* Shouldn't ever get here unless we have something weird */
++              return -1;
++      }
++
++      /* Perform a quick check to make sure that everything worked as it
++       * should have.  */
++
++      switch (interface->bNumEndpoints) {
++      case 2:
++              if (!have_bulk_in_mux || !have_bulk_out_mux) {
++                      info("usb_ipc_probe: Two bulk endpoints required.");
++                      return -1;
++              }
++              break;
++      default:
++              info("usb_ipc_probe: Endpoint determination failed ^_^ ");
++              return -1;
++      }
++
++      /* Ok, now initialize all the relevant values */
++      if (!(bvd_ipc->obuf = (char *)kmalloc(writesize, GFP_KERNEL))) {
++              err("usb_ipc_probe: Not enough memory for the output buffer.");
++              kfree(bvd_ipc);
++              return -1;
++      }
++      bvd_dbg("usb_ipc_probe: obuf address:%p", bvd_ipc->obuf);
++
++      if (!(bvd_ipc->ibuf = (char *)kmalloc(readsize, GFP_KERNEL))) {
++              err("usb_ipc_probe: Not enough memory for the input buffer.");
++              kfree(bvd_ipc->obuf);
++              kfree(bvd_ipc);
++              return -1;
++      }
++      bvd_dbg("usb_ipc_probe: ibuf address:%p", bvd_ipc->ibuf);
++
++      bvd_ipc->ipc_flag = IPC_USB_PROBE_READY;
++      bvd_ipc->write_finished_flag = 1;
++      bvd_ipc->suspend_flag = 1;
++      bvd_ipc->bulk_in_ep_mux= have_bulk_in_mux;
++      bvd_ipc->bulk_out_ep_mux= have_bulk_out_mux;
++      bvd_ipc->ipc_dev = usbdev;
++      bvd_ipc->writesize = writesize;
++      INIT_LIST_HEAD (&bvd_ipc->in_buf_list);
++
++      bvd_ipc->bh.func = usbipc_bh_func;
++      bvd_ipc->bh.data = (unsigned long) bvd_ipc;
++
++      bvd_ipc->bh_bp.func = usbipc_bh_bp_func;
++      bvd_ipc->bh_bp.data = (unsigned long) bvd_ipc;
++
++      /*Build a write urb*/
++      usb_fill_bulk_urb(&bvd_ipc->writeurb_mux, usbdev,
++                        usb_sndbulkpipe(bvd_ipc->ipc_dev,
++                                        bvd_ipc->bulk_out_ep_mux),
++                        bvd_ipc->obuf, writesize, usb_ipc_write_bulk,
++                        bvd_ipc);
++      //bvd_ipc->writeurb_mux.transfer_flags |= USB_ASYNC_UNLINK;
++
++      /*Build a read urb and send a IN token first time*/
++      usb_fill_bulk_urb(&bvd_ipc->readurb_mux, usbdev,
++                        usb_rcvbulkpipe(usbdev, bvd_ipc->bulk_in_ep_mux),
++                        bvd_ipc->ibuf, readsize, usb_ipc_read_bulk, bvd_ipc);
++      //bvd_ipc->readurb_mux.transfer_flags |= USB_ASYNC_UNLINK;
++
++      usb_driver_claim_interface(&usb_ipc_driver, intf, bvd_ipc);
++      //usb_driver_claim_interface(&usb_ipc_driver, &ipccfg->interface[1], bvd_ipc);
++
++        // a2590c: dsplog is not supported by this driver
++      //      usb_driver_claim_interface(&usb_ipc_driver,
++      //                                 &ipccfg->interface[2], bvd_ipc);
++      /*send a IN token first time*/
++      bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev;
++      if (usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC))
++              printk("usb_ipc_prob: usb_submit_urb(read mux bulk) failed!\n");
++
++      bvd_dbg("usb_ipc_prob: Send a IN token successfully!");
++
++      if (bvd_ipc->xmit.head != bvd_ipc->xmit.tail) {
++              printk("usb_ipc_probe: mark ipcusb_softint!\n");
++              tasklet_schedule(&bvd_ipc->bh);
++      }
++
++      printk("usb_ipc_probe: completed probe!");
++      usb_set_intfdata(intf, &bvd_ipc);
++      return 0;
++}
++
++static void usb_ipc_disconnect(struct usb_interface *intf)
++{
++      //struct usb_device *usbdev = interface_to_usbdev(intf);
++      struct ipc_usb_data *bvd_ipc_disconnect = usb_get_intfdata(intf);
++
++      printk("usb_ipc_disconnect:*** \n");
++
++      if ((UHCRHPS3 & 0x4) == 0)
++              usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux);
++
++      usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux);
++
++      bvd_ipc_disconnect->ipc_flag = IPC_USB_PROBE_NOT_READY;
++      kfree(bvd_ipc_disconnect->ibuf);
++      kfree(bvd_ipc_disconnect->obuf);
++
++      usb_driver_release_interface(&usb_ipc_driver,
++                      bvd_ipc_disconnect->ipc_dev->actconfig->interface[0]);
++        usb_driver_release_interface(&usb_ipc_driver,
++                      bvd_ipc_disconnect->ipc_dev->actconfig->interface[1]);
++
++      //a2590c: dsplog interface is not supported by this driver
++      //usb_driver_release_interface(&usb_ipc_driver, &bvd_ipc_disconnect->ipc_dev->actconfig->interface[2]);
++
++      bvd_ipc_disconnect->ipc_dev = NULL;
++
++      usb_set_intfdata(intf, NULL);
++
++      printk("usb_ipc_disconnect completed!\n");
++}
++
++static struct usb_device_id usb_ipc_id_table[] = {
++      { USB_DEVICE(MOTO_IPC_VID, MOTO_IPC_PID) },
++      { }                                             /* Terminating entry */
++};
++
++static struct usb_driver usb_ipc_driver = {
++      .name           = "usb ipc",
++      .probe          = usb_ipc_probe,
++      .disconnect     = usb_ipc_disconnect,
++      .id_table       = usb_ipc_id_table,
++};
++
++static int __init usb_ipc_init(void)
++{
++      int result;
++
++      bvd_dbg("init usb_ipc");
++      /* register driver at the USB subsystem */
++      result = usb_register(&usb_ipc_driver);
++      if (result < 0) {
++              err ("usb ipc driver could not be registered");
++              return result;
++      }
++
++      /*init the related mux interface*/
++      if (!(bvd_ipc = kzalloc(sizeof(struct ipc_usb_data), GFP_KERNEL))) {
++              err("usb_ipc_init: Out of memory.");
++              usb_deregister(&usb_ipc_driver);
++              return -ENOMEM;
++      }
++      bvd_dbg("usb_ipc_init: Address of bvd_ipc:%p", bvd_ipc);
++
++      if (!(bvd_ipc->xmit.buf = kmalloc(IPC_USB_XMIT_SIZE, GFP_KERNEL))) {
++              err("usb_ipc_init: Not enough memory for the input buffer.");
++              kfree(bvd_ipc);
++              usb_deregister(&usb_ipc_driver);
++              return -ENOMEM;
++      }
++      bvd_dbg("usb_ipc_init: bvd_ipc->xmit.buf address:%p",
++              bvd_ipc->xmit.buf);
++      bvd_ipc->ipc_dev = NULL;
++      bvd_ipc->xmit.head = bvd_ipc->xmit.tail = 0;
++      bvd_ipc->write_flag = IPC_USB_WRITE_INIT;
++
++      ipcusb_tty_driver.write = usb_ipc_write;
++      ipcusb_tty_driver.chars_in_buffer = usb_ipc_chars_in_buffer;
++
++      usb_for_mux_driver = &ipcusb_tty_driver;
++      usb_for_mux_tty = &ipcusb_tty;
++
++      /* init timers for ipcusb read process and usb suspend */
++      init_timer(&ipcusb_timer);
++      ipcusb_timer.function = ipcusb_timeout;
++
++      init_timer(&suspend_timer);
++      suspend_timer.function = suspend_timeout;
++
++      init_timer(&wakeup_timer);
++      wakeup_timer.function = wakeup_timeout;
++
++      info("USB Host(Bulverde) IPC driver registered.");
++      info(DRIVER_VERSION ":" DRIVER_DESC);
++
++      return 0;
++}
++
++static void __exit usb_ipc_exit(void)
++{
++      bvd_dbg("cleanup bvd_ipc");
++
++      kfree(bvd_ipc->xmit.buf);
++      kfree(bvd_ipc);
++      usb_deregister(&usb_ipc_driver);
++
++      info("USB Host(Bulverde) IPC driver deregistered.");
++}
++
++module_init(usb_ipc_init);
++module_exit(usb_ipc_exit);
++EXPORT_SYMBOL(usb_send_readurb);
+Index: linux-2.6.24/drivers/char/ts0710_mux_usb.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/char/ts0710_mux_usb.h
+@@ -0,0 +1,29 @@
++/*
++ * linux/drivers/usb/ipcusb.h
++ *
++ * Implementation of a ipc driver based Intel's Bulverde USB Host
++ * Controller.
++ *
++ * Copyright (C) 2003-2005 Motorola
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2 of the License, or
++ *  (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ *  2003-Nov-18 - (Motorola) created
++ *
++ */
++extern struct tty_driver *usb_for_mux_driver;
++extern struct tty_struct *usb_for_mux_tty;
++extern void (*usb_mux_dispatcher)(struct tty_struct *tty);
++extern void (*usb_mux_sender)(void);

diff --git a/packages/linux/linux-ezx-2.6.24/patches/mux_debug.patch b/packages/linux/linux-ezx-2.6.24/patches/mux_debug.patch
new file mode 100644 (file)
index 0000000..58cb25a
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/mux_debug.patch
@@ -0,0 +1,551 @@
+Index: linux-2.6.20.7/drivers/char/ts0710_mux.c
+===================================================================
+--- linux-2.6.20.7.orig/drivers/char/ts0710_mux.c      2007-04-22 12:24:18.000000000 +0200
++++ linux-2.6.20.7/drivers/char/ts0710_mux.c   2007-04-22 12:26:47.000000000 +0200
+@@ -85,6 +85,9 @@
+ #include "ts0710.h"
+ #include "ts0710_mux.h"
+ 
++#define TS0710DEBUG
++#define PRINT_OUTPUT_PRINTK
++
+ #define TS0710MUX_GPRS_SESSION_MAX 2
+ #define TS0710MUX_MAJOR 250
+ #define TS0710MUX_MINOR_START 0
+@@ -316,7 +319,7 @@
+ #ifdef TS0710DEBUG
+ 
+ #ifdef PRINT_OUTPUT_PRINTK
+-#define TS0710_DEBUG(fmt, arg...) printk(KERN_INFO "MUX " __FUNCTION__ ": " fmt "\n" , ## arg)
++#define TS0710_DEBUG(fmt, arg...) printk(KERN_INFO "MUX %s: " fmt "\n" , __func__, ## arg)
+ #else
+ #include "ezxlog.h"
+ static __u8 strDebug[256];
+@@ -530,10 +533,10 @@
+               if (strncmp(p->comm, "aplogd", 6) == 0) {
+                       sig = 1;
+                       if (send_sig(SIGUSR2, p, 1) == 0) {
+-                              TS0710_PRINTK
++                              TS0710_DEBUG
+                                   ("MUX: success to send SIGUSR2 to aplogd!\n");
+                       } else {
+-                              TS0710_PRINTK
++                              TS0710_DEBUG
+                                   ("MUX: failure to send SIGUSR2 to aplogd!\n");
+                       }
+                       break;
+@@ -542,7 +545,7 @@
+       read_unlock(&tasklist_lock);
+ 
+       if (!sig) {
+-              TS0710_PRINTK("MUX: not found aplogd!\n");
++              TS0710_DEBUG("MUX: not found aplogd!\n");
+       }
+ }
+ #else
+@@ -559,11 +562,11 @@
+       buf[len + 1] = TS0710_BASIC_FLAG;
+ 
+       if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) {
+-              TS0710_PRINTK
++              TS0710_DEBUG
+                   ("MUX basic_write: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n");
+ 
+ #ifndef USB_FOR_MUX
+-              TS0710_PRINTK
++              TS0710_DEBUG
+                   ("MUX basic_write: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n");
+               TS0710_SIG2APLOGD();
+ #endif
+@@ -577,7 +580,7 @@
+       res = COMM_FOR_MUX_DRIVER->write(COMM_FOR_MUX_TTY, buf, len + 2);
+ 
+       if (res != len + 2) {
+-              TS0710_PRINTK("MUX basic_write: Write Error!\n");
++              TS0710_DEBUG("MUX basic_write: Write Error!\n");
+               return -1;
+       }
+ 
+@@ -601,7 +604,7 @@
+               TS0710_DEBUG("crc_check: CRC check OK\n");
+               return 0;
+       } else {
+-              TS0710_PRINTK("MUX crc_check: CRC check failed\n");
++              TS0710_DEBUG("MUX crc_check: CRC check failed\n");
+               return 1;
+       }
+ }
+@@ -1266,7 +1269,7 @@
+               break;
+ 
+       case FCON:              /*Flow control on command */
+-              TS0710_PRINTK
++              TS0710_DEBUG
+                   ("MUX Received Flow control(all channels) on command\n");
+               if (mcc_short_pkt->h.type.cr == MCC_CMD) {
+                       ts0710->dlci[0].state = CONNECTED;
+@@ -1276,7 +1279,7 @@
+               break;
+ 
+       case FCOFF:             /*Flow control off command */
+-              TS0710_PRINTK
++              TS0710_DEBUG
+                   ("MUX Received Flow control(all channels) off command\n");
+               if (mcc_short_pkt->h.type.cr == MCC_CMD) {
+                       for (j = 0; j < TS0710_MAX_CHN; j++) {
+@@ -1823,7 +1826,7 @@
+                       TS0710_DEBUG("UIH on channel %d\n", dlci);
+ 
+                       if (uih_len > ts0710->dlci[dlci].mtu) {
+-                              TS0710_PRINTK
++                              TS0710_DEBUG
+                                   ("MUX Error:  DLCI:%d, uih_len:%d is bigger than mtu:%d, discard data!\n",
+                                    dlci, uih_len, ts0710->dlci[dlci].mtu);
+                               break;
+@@ -1844,7 +1847,7 @@
+                                            dlci, tty_idx);
+                               TS0710_DEBUGSTR(uih_data_start, uih_len);
+                               if (!(iscmdtty[tty_idx])) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX Error: %s: Wrong CMDTAG on DLCI:%d, /dev/mux%d\n",
+                                            __FUNCTION__, dlci, tty_idx);
+                               }
+@@ -1856,7 +1859,7 @@
+                                   ("NON-CMDTAG on DLCI:%d, /dev/mux%d\n",
+                                    dlci, tty_idx);
+                               if (iscmdtty[tty_idx]) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX Error: %s: Wrong NON-CMDTAG on DLCI:%d, /dev/mux%d\n",
+                                            __FUNCTION__, dlci, tty_idx);
+                               }
+@@ -1864,13 +1867,14 @@
+                       }
+                       tty = mux_table[tty_idx];
+                       if ((!mux_tty[tty_idx]) || (!tty)) {
+-                              TS0710_PRINTK
++                              TS0710_DEBUG
+                                   ("MUX: No application waiting for, discard it! /dev/mux%d\n",
+                                    tty_idx);
++                              TS0710_DEBUG("MUX: mux_tty[%d] = %d, tty is at %i", tty_idx, mux_tty[tty_idx], tty);
+                       } else {        /* Begin processing received data */
+                               if ((!mux_recv_info_flags[tty_idx])
+                                   || (!mux_recv_info[tty_idx])) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX Error: No mux_recv_info, discard it! /dev/mux%d\n",
+                                            tty_idx);
+                                       break;
+@@ -1878,7 +1882,7 @@
+ 
+                               recv_info = mux_recv_info[tty_idx];
+                               if (recv_info->total > 8192) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX : discard data for tty_idx:%d, recv_info->total > 8192 \n",
+                                            tty_idx);
+                                       break;
+@@ -1949,7 +1953,7 @@
+                                                   get_mux_recv_packet
+                                                   (uih_len);
+                                               if (!recv_packet) {
+-                                                      TS0710_PRINTK
++                                                      TS0710_DEBUG
+                                                           ("MUX %s: no memory\n",
+                                                            __FUNCTION__);
+                                                       break;
+@@ -1980,7 +1984,7 @@
+                                       } else {        /* recv_info->total == 0 */
+                                               if (uih_len >
+                                                   TS0710MUX_RECV_BUF_SIZE) {
+-                                                      TS0710_PRINTK
++                                                      TS0710_DEBUG
+                                                           ("MUX Error:  tty_idx:%d, uih_len == %d is too big\n",
+                                                            tty_idx, uih_len);
+                                                       uih_len =
+@@ -2120,12 +2124,12 @@
+                       if (ts0710->dlci[dlci].state == DISCONNECTED) {
+                               break;
+                       } else if (signal_pending(current)) {
+-                              TS0710_PRINTK
++                              TS0710_DEBUG
+                                   ("MUX DLCI %d Send DISC got signal!\n",
+                                    dlci);
+                               break;
+                       } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
+-                              TS0710_PRINTK
++                              TS0710_DEBUG
+                                   ("MUX DLCI %d Send DISC timeout!\n", dlci);
+                               continue;
+                       }
+@@ -2158,7 +2162,7 @@
+                       return 0;
+               } else if (ts0710->dlci[0].state == CONNECTING) {
+                       /* Reentry */
+-                      TS0710_PRINTK
++                      TS0710_DEBUG
+                           ("MUX DLCI: 0, reentry to open DLCI 0, pid: %d, %s !\n",
+                            current->pid, current->comm);
+                       try = 11;
+@@ -2179,13 +2183,13 @@
+                                          DISCONNECTED) {
+                                       break;
+                               } else if (signal_pending(current)) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX DLCI:%d Wait for connecting got signal!\n",
+                                            dlci);
+                                       retval = -EAGAIN;
+                                       break;
+                               } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX DLCI:%d Wait for connecting timeout!\n",
+                                            dlci);
+                                       continue;
+@@ -2199,7 +2203,7 @@
+                       }
+               } else if ((ts0710->dlci[0].state != DISCONNECTED)
+                          && (ts0710->dlci[0].state != REJECTED)) {
+-                      TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci);
++                      TS0710_DEBUG("MUX DLCI:%d state is invalid!\n", dlci);
+                       return retval;
+               } else {
+                       ts0710->initiator = 1;
+@@ -2218,19 +2222,19 @@
+                                       retval = 0;
+                                       break;
+                               } else if (ts0710->dlci[0].state == REJECTED) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX DLCI:%d Send SABM got rejected!\n",
+                                            dlci);
+                                       retval = -EREJECTED;
+                                       break;
+                               } else if (signal_pending(current)) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX DLCI:%d Send SABM got signal!\n",
+                                            dlci);
+                                       retval = -EAGAIN;
+                                       break;
+                               } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX DLCI:%d Send SABM timeout!\n",
+                                            dlci);
+                                       continue;
+@@ -2271,13 +2275,13 @@
+                                          DISCONNECTED) {
+                                       break;
+                               } else if (signal_pending(current)) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX DLCI:%d Wait for connecting got signal!\n",
+                                            dlci);
+                                       retval = -EAGAIN;
+                                       break;
+                               } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX DLCI:%d Wait for connecting timeout!\n",
+                                            dlci);
+                                       continue;
+@@ -2296,7 +2300,7 @@
+                       }
+               } else if ((ts0710->dlci[dlci].state != DISCONNECTED)
+                          && (ts0710->dlci[dlci].state != REJECTED)) {
+-                      TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci);
++                      TS0710_DEBUG("MUX DLCI:%d state is invalid!\n", dlci);
+                       return retval;
+               } else {
+                       ts0710->dlci[dlci].state = NEGOTIATING;
+@@ -2313,13 +2317,13 @@
+                               if (ts0710->dlci[dlci].state == CONNECTING) {
+                                       break;
+                               } else if (signal_pending(current)) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX DLCI:%d Send pn_msg got signal!\n",
+                                            dlci);
+                                       retval = -EAGAIN;
+                                       break;
+                               } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX DLCI:%d Send pn_msg timeout!\n",
+                                            dlci);
+                                       continue;
+@@ -2344,20 +2348,20 @@
+                                               break;
+                                       } else if (ts0710->dlci[dlci].state ==
+                                                  REJECTED) {
+-                                              TS0710_PRINTK
++                                              TS0710_DEBUG
+                                                   ("MUX DLCI:%d Send SABM got rejected!\n",
+                                                    dlci);
+                                               retval = -EREJECTED;
+                                               break;
+                                       } else if (signal_pending(current)) {
+-                                              TS0710_PRINTK
++                                              TS0710_DEBUG
+                                                   ("MUX DLCI:%d Send SABM got signal!\n",
+                                                    dlci);
+                                               retval = -EAGAIN;
+                                               break;
+                                       } else if ((jiffies - t) >=
+                                                  TS0710MUX_TIME_OUT) {
+-                                              TS0710_PRINTK
++                                              TS0710_DEBUG
+                                                   ("MUX DLCI:%d Send SABM timeout!\n",
+                                                    dlci);
+                                               continue;
+@@ -2468,7 +2472,7 @@
+       schedule_work(&send_tqueue);
+ #else
+       if (!tq_serial_for_mux) {
+-              TS0710_PRINTK("MUX Error: %s: tq_serial_for_mux == 0\n",
++              TS0710_DEBUG("MUX Error: %s: tq_serial_for_mux == 0\n",
+                             __FUNCTION__);
+               return;
+       }
+@@ -2508,7 +2512,7 @@
+       if ((mux_tty[cmdtty] == 0) && (mux_tty[datatty] == 0)) {
+               if (dlci == 1) {
+                       ts0710_close_channel(0);
+-                      TS0710_PRINTK
++                      TS0710_DEBUG
+                           ("MUX mux_close: tapisrv might be down!!! Close DLCI 1\n");
+                       TS0710_SIG2APLOGD();
+               }
+@@ -2673,12 +2677,12 @@
+       UNUSED_PARAM(tty);
+ 
+       if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) {
+-              TS0710_PRINTK
++              TS0710_DEBUG
+                   ("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n",
+                    __FUNCTION__);
+ 
+ #ifndef USB_FOR_MUX
+-              TS0710_PRINTK
++              TS0710_DEBUG
+                   ("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n",
+                    __FUNCTION__);
+               TS0710_SIG2APLOGD();
+@@ -2724,14 +2728,14 @@
+       } else if (ts0710->dlci[dlci].state == CONNECTED) {
+ 
+               if (!(mux_send_info_flags[line])) {
+-                      TS0710_PRINTK
++                      TS0710_DEBUG
+                           ("MUX Error: mux_write: mux_send_info_flags[%d] == 0\n",
+                            line);
+                       return -ENODEV;
+               }
+               send_info = mux_send_info[line];
+               if (!send_info) {
+-                      TS0710_PRINTK
++                      TS0710_DEBUG
+                           ("MUX Error: mux_write: mux_send_info[%d] == 0\n",
+                            line);
+                       return -ENODEV;
+@@ -2800,7 +2804,7 @@
+               }
+               return c;
+       } else {
+-              TS0710_PRINTK("MUX mux_write: DLCI %d not connected\n", dlci);
++              TS0710_DEBUG("MUX mux_write: DLCI %d not connected\n", dlci);
+               return -EDISCONNECTED;
+       }
+ }
+@@ -2940,7 +2944,7 @@
+               return;
+       }
+ 
+-      TS0710_PRINTK("MUX %s: line is:%d\n", __FUNCTION__, line);
++      TS0710_DEBUG("MUX %s: line is:%d\n", __FUNCTION__, line);
+ 
+       if ((mux_send_info_flags[line])
+           && (mux_send_info[line])
+@@ -2960,10 +2964,10 @@
+ 
+ /*
+   if( (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0) ) {
+-    TS0710_PRINTK("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n", __FUNCTION__);
++    TS0710_DEBUG("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n", __FUNCTION__);
+ 
+ #ifndef USB_FOR_MUX
+-    TS0710_PRINTK("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n", __FUNCTION__);
++    TS0710_DEBUG("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n", __FUNCTION__);
+     TS0710_SIG2APLOGD();
+ #endif
+ 
+@@ -2989,9 +2993,9 @@
+       if ((COMM_FOR_MUX_DRIVER == NULL) || (COMM_FOR_MUX_TTY == NULL)) {
+ 
+ #ifdef USB_FOR_MUX
+-              TS0710_PRINTK("MUX: please install and open IPC-USB first\n");
++              TS0710_DEBUG("MUX: please install and open IPC-USB first\n");
+ #else
+-              TS0710_PRINTK("MUX: please install and open ttyS0 first\n");
++              TS0710_DEBUG("MUX: please install and open ttyS0 first\n");
+ #endif
+ 
+               goto out;
+@@ -3016,7 +3020,7 @@
+ /*  if( dlci == 1 ) { */
+       /* Open server channel 0 first */
+       if ((retval = ts0710_open_channel(0)) != 0) {
+-              TS0710_PRINTK("MUX: Can't connect server channel 0!\n");
++              TS0710_DEBUG("MUX: Can't connect server channel 0!\n");
+               ts0710_init();
+ 
+               mux_tty[line]--;
+@@ -3073,7 +3077,7 @@
+       datatty = dlci2tty[dlci].datatty;
+       if ((mux_tty[cmdtty] > 0) || (mux_tty[datatty] > 0)) {
+               if ((retval = ts0710_open_channel(dlci)) != 0) {
+-                      TS0710_PRINTK("MUX: Can't connected channel %d!\n",
++                      TS0710_DEBUG("MUX: Can't connected channel %d!\n",
+                                     dlci);
+                       ts0710_reset_dlci(dlci);
+ 
+@@ -3096,6 +3100,7 @@
+       retval = 0;
+ #endif
+       out:
++      TS0710_DEBUG("returning %d for open of /dev/mux%d (mux_tty[%d] = %d", retval, line, line, mux_tty[line]);
+       return retval;
+ }
+ 
+@@ -3178,12 +3183,12 @@
+ 
+       while (1) {
+               tbuf_free = TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf);
+-              TS0710_PRINTK("Reading max %i bytes from ts0710_mux_usb inbuf.\n", tbuf_free);
++              TS0710_DEBUG("Reading max %i bytes from ts0710_mux_usb inbuf.\n", tbuf_free);
+               tbuf_read = get_from_inbuf_list(tbuf_ptr, tbuf_free);
+               if (tbuf_read == 0) {
+                       break;
+               } else {
+-                      TS0710_PRINTK("Read %i bytes.\n", tbuf_read);
++                      TS0710_DEBUG("Read %i bytes.\n", tbuf_read);
+               };
+               tbuf_ptr += tbuf_read;
+       };
+@@ -3192,7 +3197,7 @@
+ 
+       // Should be impossible?
+       //if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) {
+-      //      TS0710_PRINTK
++      //      TS0710_DEBUG
+       //          ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n");
+       //      count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf));
+       //}
+@@ -3264,7 +3269,7 @@
+                                       TS0710_LOGSTR_FRAME(0, start_flag,
+                                                           (tbuf_ptr -
+                                                            start_flag));
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX Error: %s: frame length:%d is bigger than Max total frame size:%d\n",
+                /*__FUNCTION__, framelen, TS0710MUX_MAX_TOTAL_FRAME_SIZE);*/
+                                            __FUNCTION__, framelen, (TS0710MUX_MAX_TOTAL_FRAME_SIZE + SEQ_FIELD_SIZE));        /*For BP UART problem */
+@@ -3389,7 +3394,7 @@
+                                                               *(uih_data_start
+                                                                 + uih_len) =
+                                                    0;
+-                                                              TS0710_PRINTK
++                                                              TS0710_DEBUG
+                                                                   ("MUX bp log: %s\n",
+                                                                    uih_data_start);
+                                                       }
+@@ -3415,7 +3420,7 @@
+                                       TS0710_LOGSTR_FRAME(0, start_flag,
+                                                           framelen);
+                                       TS0710_DEBUGHEX(start_flag, framelen);
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX: Lost synchronization!\n");
+                                       search = start_flag + 1;
+                               }
+@@ -3476,7 +3481,7 @@
+               recv_info2 = recv_info->next;
+ 
+               if (!(recv_info->total)) {
+-                      TS0710_PRINTK
++                      TS0710_DEBUG
+                           ("MUX Error: %s: Should not get here, recv_info->total == 0 \n",
+                            __FUNCTION__);
+                       continue;
+@@ -3486,7 +3491,7 @@
+               dlci = tty2dlci[tty_idx];
+               tty = mux_table[tty_idx];
+               if ((!mux_tty[tty_idx]) || (!tty)) {
+-                      TS0710_PRINTK
++                      TS0710_DEBUG
+                           ("MUX: No application waiting for, free recv_info! tty_idx:%d\n",
+                            tty_idx);
+                       mux_recv_info_flags[tty_idx] = 0;
+@@ -3560,7 +3565,7 @@
+                                       recv_info->total -= recv_packet->length;
+                                       free_mux_recv_packet(recv_packet);
+                               } else {
+-                                      TS0710_PRINTK
++                                      TS0710_DEBUG
+                                           ("MUX Error: %s: Should not get here, recv_info->total is:%u \n",
+                                            __FUNCTION__, recv_info->total);
+                               }
+@@ -3760,7 +3765,7 @@
+       int ret;
+ 
+       if (idx > TS0710MUX_COUNT_MAX_IDX) {
+-              TS0710_PRINTK("MUX get_count: invalid idx: %d!\n", idx);
++              TS0710_DEBUG("MUX get_count: invalid idx: %d!\n", idx);
+               return -1;
+       }
+ 
+@@ -3774,11 +3779,11 @@
+ static int set_count(__u8 idx, int count)
+ {
+       if (idx > TS0710MUX_COUNT_MAX_IDX) {
+-              TS0710_PRINTK("MUX set_count: invalid idx: %d!\n", idx);
++              TS0710_DEBUG("MUX set_count: invalid idx: %d!\n", idx);
+               return -1;
+       }
+       if (count < 0) {
+-              TS0710_PRINTK("MUX set_count: invalid count: %d!\n", count);
++              TS0710_DEBUG("MUX set_count: invalid count: %d!\n", count);
+               return -1;
+       }
+ 
+@@ -3792,11 +3797,11 @@
+ static int add_count(__u8 idx, int count)
+ {
+       if (idx > TS0710MUX_COUNT_MAX_IDX) {
+-              TS0710_PRINTK("MUX add_count: invalid idx: %d!\n", idx);
++              TS0710_DEBUG("MUX add_count: invalid idx: %d!\n", idx);
+               return -1;
+       }
+       if (count <= 0) {
+-              TS0710_PRINTK("MUX add_count: invalid count: %d!\n", count);
++              TS0710_DEBUG("MUX add_count: invalid count: %d!\n", count);
+               return -1;
+       }
+ 
+Index: linux-2.6.20.7/drivers/char/ts0710_mux_usb.c
+===================================================================
+--- linux-2.6.20.7.orig/drivers/char/ts0710_mux_usb.c  2007-04-22 12:26:47.000000000 +0200
++++ linux-2.6.20.7/drivers/char/ts0710_mux_usb.c       2007-04-22 12:26:47.000000000 +0200
+@@ -72,7 +72,8 @@
+ #define IPC_USB_PROBE_NOT_READY       4
+ #define DBG_MAX_BUF_SIZE      1024
+ #define ICL_EVENT_INTERVAL    (HZ)
+-#undef BVD_DEBUG
++
++#define BVD_DEBUG
+ 
+ #define IS_EP_BULK(ep)  ((ep).bmAttributes == USB_ENDPOINT_XFER_BULK ? 1 : 0)
+ #define IS_EP_BULK_IN(ep) (IS_EP_BULK(ep) && ((ep).bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pcap-ts.patch b/packages/linux/linux-ezx-2.6.24/patches/pcap-ts.patch
new file mode 100644 (file)
index 0000000..47cc1a3
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pcap-ts.patch
@@ -0,0 +1,363 @@
+Index: linux-2.6.24/drivers/input/touchscreen/Kconfig
+===================================================================
+--- linux-2.6.24.orig/drivers/input/touchscreen/Kconfig
++++ linux-2.6.24/drivers/input/touchscreen/Kconfig
+@@ -263,4 +263,13 @@
+       bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
+       depends on TOUCHSCREEN_USB_COMPOSITE
+ 
++config TOUCHSCREEN_PCAP
++      tristate "Motorola PCAP touchscreen"
++      depends on EZX_PCAP
++      help
++        Say Y here if you have a Motorola EZX telephone and
++        want to support the built-in touchscreen.
++
++        If unsure, say N.
++
+ endif
+Index: linux-2.6.24/drivers/input/touchscreen/pcap_ts.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/input/touchscreen/pcap_ts.c
+@@ -0,0 +1,331 @@
++/*
++ * pcap_ts.c - Touchscreen driver for Motorola PCAP2 based touchscreen as found
++ *           in the EZX phone platform.
++ *
++ *  Copyright (C) 2006 Harald Welte <laforge@openezx.org>
++ *  Copyright (C) 2007 Daniel Ribeiro <wyrm@openezx.org>
++ *
++ *  Based on information found in the original Motorola 2.4.x ezx-ts.c driver.
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ * TODO:
++ *    split this in a hardirq handler and a tasklet/bh
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/fs.h>
++#include <linux/string.h>
++#include <linux/pm.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/input.h>
++
++#include <asm/arch/hardware.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/ezx-pcap.h>
++
++#if 0
++#define DEBUGP(x, args ...) printk(x, ## args)
++#else
++#define DEBUGP(x, args ...)
++#endif
++
++#define POSITION_X_MEASUREMENT        0
++#define POSITION_XY_MEASUREMENT       1
++#define PRESSURE_MEASUREMENT  2
++#define PLATE_X_MEASUREMENT   3
++#define PLATE_Y_MEASUREMENT   4
++#define STANDBY_MODE          5
++#define NONTS_MODE            6
++
++struct pcap_ts {
++      int irq_xy;
++      int irq_touch;
++      struct input_dev *input;
++      struct timer_list timer;
++      u_int16_t x, y;
++      u_int16_t pressure;
++      u_int8_t read_state;
++};
++
++#define X_AXIS_MIN    0
++#define X_AXIS_MAX    1023
++
++#define Y_AXIS_MAX    X_AXIS_MAX
++#define Y_AXIS_MIN    X_AXIS_MIN
++
++#define PRESSURE_MAX  X_AXIS_MAX
++#define PRESSURE_MIN  X_AXIS_MIN
++
++/* if we try to read faster, pressure reading becomes unreliable */
++#define SAMPLE_INTERVAL               (HZ/50)
++
++
++static void pcap_ts_mode(struct pcap_ts *pcap_ts, u_int32_t mode)
++{
++      u_int32_t tmp;
++
++      pcap_ts->read_state = mode;
++      ezx_pcap_read(PCAP_REG_ADC1, &tmp);
++      tmp &= ~PCAP_ADC1_TS_M_MASK;
++      tmp |= ((mode << PCAP_ADC1_TS_M_SHIFT) & PCAP_ADC1_TS_M_MASK);
++      ezx_pcap_write(PCAP_REG_ADC1, tmp);
++}
++
++/* issue a XY read command to the ADC of PCAP2.  Well get an ADCDONE interrupt
++ * once the result of the conversion is available */
++static void pcap_ts_start_xy_read(struct pcap_ts *pcap_ts)
++{
++      u_int32_t tmp;
++
++      ezx_pcap_read(PCAP_REG_ADC1, &tmp);
++      tmp &= ~(PCAP_BIT_ADC1_RAND | PCAP_ADC1_ADA1_MASK |
++                                      PCAP_ADC1_ADA2_MASK);
++      tmp |= (PCAP_BIT_ADC1_ADEN | PCAP_BIT_ADC1_AD_SEL1 |
++              PCAP_BIT_ADC1_AD_SEL2 | (5 << PCAP_ADC1_ADA1_SHIFT) |
++                                      (3 << PCAP_ADC1_ADA2_SHIFT));
++      ezx_pcap_write(PCAP_REG_ADC1, tmp);
++      ezx_pcap_bit_set(PCAP_BIT_ADC2_ASC, 1);
++}
++
++/* read the XY result from the ADC of PCAP2 */
++static void pcap_ts_get_xy_value(struct pcap_ts *pcap_ts)
++{
++      u_int32_t tmp;
++
++      ezx_pcap_read(PCAP_REG_ADC2, &tmp);
++
++      if (pcap_ts->read_state == POSITION_XY_MEASUREMENT) {
++              pcap_ts->x = (tmp & PCAP_ADC2_ADD1_MASK) >>
++                                      PCAP_ADC2_ADD1_SHIFT;
++              pcap_ts->y = (tmp & PCAP_ADC2_ADD2_MASK) >>
++                                      PCAP_ADC2_ADD2_SHIFT;
++      } else {
++              pcap_ts->pressure = (tmp & PCAP_ADC2_ADD2_MASK) >>
++                                              PCAP_ADC2_ADD2_SHIFT;
++      }
++}
++
++/* PCAP2 interrupts us when ADC conversion result is available */
++static irqreturn_t pcap_ts_irq_xy(int irq, void *dev_id)
++{
++      struct pcap_ts *pcap_ts = dev_id;
++
++      pcap_ts_get_xy_value(pcap_ts);
++      DEBUGP(KERN_DEBUG "%s X=%4d, Y=%4d Z=%4d ",
++              pcap_ts->read_state == POSITION_XY_MEASUREMENT ? "COORD" :
++                      "PRESS", pcap_ts->x, pcap_ts->y, pcap_ts->pressure);
++      switch (pcap_ts->read_state) {
++      case PRESSURE_MEASUREMENT:
++              if (pcap_ts->pressure >= PRESSURE_MAX ||
++                   pcap_ts->pressure <= PRESSURE_MIN ) {
++                      /* pen has been released (or cant read pressure - WM)*/
++                      DEBUGP("UP\n");
++                      /* do nothing */
++              } else {
++                      /* pen has been touched down */
++                      DEBUGP("DOWN\n");
++                      input_report_key(pcap_ts->input, BTN_TOUCH, 1);
++                      input_report_abs(pcap_ts->input, ABS_PRESSURE, pcap_ts->pressure);
++              }
++              /* switch state machine into coordinate read mode */
++              pcap_ts_mode(pcap_ts, POSITION_XY_MEASUREMENT);
++              pcap_ts_start_xy_read(pcap_ts);
++              break;
++      case POSITION_XY_MEASUREMENT:
++              if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX ||
++                  pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) {
++                      /* pen has been released */
++                      DEBUGP("UP END\n");
++
++                      input_report_key(pcap_ts->input, BTN_TOUCH, 0);
++                      input_report_abs(pcap_ts->input, ABS_PRESSURE, 0);
++
++                      /* no need for timer, we'll get interrupted with
++                       * next touch down event */
++                      del_timer(&pcap_ts->timer);
++
++                      /* ask PCAP2 to interrupt us if touch event happens
++                       * again */
++                      pcap_ts_mode(pcap_ts, STANDBY_MODE);
++                      enable_irq(pcap_ts->irq_touch);
++              } else {
++                      DEBUGP("DOWN\n");
++                      input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x);
++                      input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y);
++
++                      /* switch back to pressure read mode */
++                      pcap_ts_mode(pcap_ts, PRESSURE_MEASUREMENT);
++                      mod_timer(&pcap_ts->timer, jiffies + SAMPLE_INTERVAL);
++              }
++              input_sync(pcap_ts->input);
++              break;
++      default:
++              DEBUGP("ERROR\n");
++              break;
++      }
++      return IRQ_HANDLED;
++}
++
++/* PCAP2 interrupts us if the pen touches down (interrupts also on pen up - WM)*/
++static irqreturn_t pcap_ts_irq_touch(int irq, void *dev_id)
++{
++      struct pcap_ts *pcap_ts = dev_id;
++      /* mask Touchscreen interrupt bit, prevents further touch events
++       * from being reported to us until we're finished with reading
++       * both pressure and x/y from ADC */
++      disable_irq(pcap_ts->irq_touch);
++
++      DEBUGP("touched!!\n");
++      pcap_ts_mode(pcap_ts, PRESSURE_MEASUREMENT);
++      pcap_ts_start_xy_read(pcap_ts);
++      return IRQ_HANDLED;
++}
++
++static void pcap_ts_timer_fn(unsigned long data)
++{
++      struct pcap_ts *pcap_ts = (struct pcap_ts *) data;
++
++      pcap_ts_start_xy_read(pcap_ts);
++}
++
++static int __init ezxts_probe(struct platform_device *pdev)
++{
++      struct pcap_ts *pcap_ts;
++      struct input_dev *input_dev;
++      int err = -ENOMEM;
++
++      pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL);
++      input_dev = input_allocate_device();
++      if (!pcap_ts || !input_dev)
++              goto fail;
++
++      pcap_ts->irq_xy = platform_get_irq(pdev, 0);
++      if (pcap_ts->irq_xy < 0) {
++              err = pcap_ts->irq_xy;
++              goto fail;
++      }
++
++      pcap_ts->irq_touch = platform_get_irq(pdev, 1);
++      if (pcap_ts->irq_touch < 0) {
++              err = pcap_ts->irq_touch;
++              goto fail;
++      }
++
++      ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REFENB, 0);
++      pcap_ts_mode(pcap_ts, STANDBY_MODE);
++
++      err = request_irq(pcap_ts->irq_xy, pcap_ts_irq_xy, IRQF_DISABLED,
++                        "pcap-ts X/Y", pcap_ts);
++      if (err < 0) {
++              printk(KERN_ERR "pcap_ts: can't grab xy irq %d: %d\n",
++                     pcap_ts->irq_xy, err);
++              goto fail;
++      }
++
++      err = request_irq(pcap_ts->irq_touch, pcap_ts_irq_touch, IRQF_DISABLED,
++                        "pcap-ts touch", pcap_ts);
++      if (err < 0) {
++              printk(KERN_ERR "pcap_ts: can't grab touch irq %d: %d\n",
++                     pcap_ts->irq_touch, err);
++              goto fail_xy;
++      }
++
++      pcap_ts->input = input_dev;
++      init_timer(&pcap_ts->timer);
++      pcap_ts->timer.data = (unsigned long) pcap_ts;
++      pcap_ts->timer.function = &pcap_ts_timer_fn;
++
++      platform_set_drvdata(pdev, pcap_ts);
++
++      input_dev->name = "pcap-touchscreen";
++      input_dev->phys = "ezxts/input0";
++      input_dev->id.bustype = BUS_HOST;
++      input_dev->id.vendor = 0x0001;
++      input_dev->id.product = 0x0002;
++      input_dev->id.version = 0x0100;
++      input_dev->cdev.dev = &pdev->dev;
++      input_dev->private = pcap_ts;
++
++      input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
++      input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
++      input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
++      input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
++      input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN,
++                           PRESSURE_MAX, 0, 0);
++
++      input_register_device(pcap_ts->input);
++
++      return 0;
++
++fail_xy:
++      free_irq(pcap_ts->irq_xy, pcap_ts);
++fail:
++      input_free_device(input_dev);
++      kfree(pcap_ts);
++
++      return err;
++}
++
++static int ezxts_remove(struct platform_device *pdev)
++{
++      struct pcap_ts *pcap_ts = platform_get_drvdata(pdev);
++
++      del_timer_sync(&pcap_ts->timer);
++
++      free_irq(pcap_ts->irq_touch, pcap_ts);
++      free_irq(pcap_ts->irq_xy, pcap_ts);
++
++      input_unregister_device(pcap_ts->input);
++      kfree(pcap_ts);
++
++      return 0;
++}
++
++static int ezxts_suspend(struct platform_device *dev, pm_message_t state)
++{
++      ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REF_LOWPWR, 1);
++        return 0;
++}
++
++static int ezxts_resume(struct platform_device *dev)
++{
++      ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REF_LOWPWR, 0);
++      /* just in case we suspend with TSI masked. */
++//    ezx_pcap_bit_set(PCAP_BIT_MSR_TSM, 0);
++        return 0;
++}
++
++
++static struct platform_driver ezxts_driver = {
++      .probe          = ezxts_probe,
++      .remove         = ezxts_remove,
++      .suspend        = ezxts_suspend,
++      .resume         = ezxts_resume,
++      .driver         = {
++              .name   = "pcap-ts",
++              .owner  = THIS_MODULE,
++      },
++};
++
++static int __init ezxts_init(void)
++{
++      return platform_driver_register(&ezxts_driver);
++}
++
++static void __exit ezxts_exit(void)
++{
++      platform_driver_unregister(&ezxts_driver);
++}
++
++module_init(ezxts_init);
++module_exit(ezxts_exit);
++
++MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver");
++MODULE_AUTHOR("Harald Welte <laforge@openezx.org>");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.24/drivers/input/touchscreen/Makefile
+===================================================================
+--- linux-2.6.24.orig/drivers/input/touchscreen/Makefile
++++ linux-2.6.24/drivers/input/touchscreen/Makefile
+@@ -19,3 +19,4 @@
+ obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)  += touchright.o
+ obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)    += touchwin.o
+ obj-$(CONFIG_TOUCHSCREEN_UCB1400)     += ucb1400_ts.o
++obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pxa-kbd.patch b/packages/linux/linux-ezx-2.6.24/patches/pxa-kbd.patch
new file mode 100644 (file)
index 0000000..d272a70
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pxa-kbd.patch
@@ -0,0 +1,547 @@
+Index: linux-2.6.24/arch/arm/mach-pxa/generic.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/generic.c
++++ linux-2.6.24/arch/arm/mach-pxa/generic.c
+@@ -38,6 +38,7 @@
+ #include <asm/arch/mmc.h>
+ #include <asm/arch/irda.h>
+ #include <asm/arch/i2c.h>
++#include <asm/arch/kbd.h>
+ 
+ #include "devices.h"
+ #include "generic.h"
+@@ -479,3 +480,28 @@
+       .name           = "sa1100-rtc",
+       .id             = -1,
+ };
++
++static struct resource pxa_kbd_resources[] = {
++      {
++              .start  = IRQ_KEYPAD,
++              .end    = IRQ_KEYPAD,
++              .flags  = IORESOURCE_IRQ,
++      }, {
++              .start  = 0x41500000,
++              .end    = 0x4150004c,
++              .flags  = IORESOURCE_MEM,
++      },
++};
++
++struct platform_device pxa_device_kbd = {
++      .name           = "pxa-keyboard",
++      .id             = -1,
++      .resource       = pxa_kbd_resources,
++      .num_resources  = ARRAY_SIZE(pxa_kbd_resources),
++};
++
++void __init pxa_set_kbd_info(struct pxakbd_platform_data *info)
++{
++      pxa_device_kbd.dev.platform_data = info;
++}
++
+Index: linux-2.6.24/drivers/input/keyboard/Kconfig
+===================================================================
+--- linux-2.6.24.orig/drivers/input/keyboard/Kconfig
++++ linux-2.6.24/drivers/input/keyboard/Kconfig
+@@ -293,4 +293,11 @@
+         To compile this driver as a module, choose M here: the
+         module will be called bf54x-keys.
+ 
++config KEYBOARD_PXA
++      tristate "Intel PXA keyboard support"
++      depends on ARCH_PXA
++      help
++        This add support for a driver of the Intel PXA2xx keyboard
++        controller.
++
+ endif
+Index: linux-2.6.24/drivers/input/keyboard/Makefile
+===================================================================
+--- linux-2.6.24.orig/drivers/input/keyboard/Makefile
++++ linux-2.6.24/drivers/input/keyboard/Makefile
+@@ -25,3 +25,4 @@
+ obj-$(CONFIG_KEYBOARD_HP7XX)          += jornada720_kbd.o
+ obj-$(CONFIG_KEYBOARD_MAPLE)          += maple_keyb.o
+ obj-$(CONFIG_KEYBOARD_BFIN)           += bf54x-keys.o
++obj-$(CONFIG_KEYBOARD_PXA)            += pxakbd.o
+Index: linux-2.6.24/include/asm-arm/arch-pxa/kbd.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24/include/asm-arm/arch-pxa/kbd.h
+@@ -0,0 +1,28 @@
++/*
++ *  kbd_pxa.h
++ *
++ *  Copyright (C) 2006 Harald Welte <laforge@openezx.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++#ifndef _KBD_PXA_H_
++#define _KBD_PXA_H_
++
++struct pxakbd_platform_data {
++      int (*init)(void);                      /* init gpio, etc. */
++      unsigned int scan_interval;
++      struct {
++              unsigned int rows;
++              unsigned int cols;
++              unsigned char *keycode;
++      } matrix;
++      struct {
++              unsigned int num;
++              unsigned char *keycode;
++      } direct;
++};
++
++#endif
+Index: linux-2.6.24/drivers/input/keyboard/pxakbd.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/input/keyboard/pxakbd.c
+@@ -0,0 +1,403 @@
++/*
++ * Driver for Motorola EZX phone "keyboard"
++ *
++ * (C) 2006 by Harald Welte <laforge@openezx.org>
++ *
++ * May, 2007 - Daniel Ribeiro <wyrm@openezx.org>
++ *            pm callbacks
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/interrupt.h>
++#include <linux/input.h>
++#include <linux/spinlock.h>
++#include <linux/platform_device.h>
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++
++#include <asm/arch/kbd.h>
++#include <asm/arch/irqs.h>
++#include <asm/arch/pxa-regs.h>
++
++#if 0
++#define DEBUGP(x, args ...) printk(x, ## args)
++#else
++#define DEBUGP(x, args ...)
++#endif
++
++/* per-keyboard private data structure */
++struct pxakbd {
++      struct input_dev *input;
++      struct timer_list timer;
++      spinlock_t lock;
++
++      struct resource *res;
++      unsigned int irq;
++      u_int32_t kpc;
++      u_int32_t kpkdi;
++
++      struct pxakbd_platform_data *pd;
++};
++
++static int pxakbd_scan_direct(struct pxakbd *pxakbd)
++{
++      u_int32_t kpdk;
++      unsigned int i;
++      int num_pressed = 0;
++
++      kpdk = KPDK & 0x000000ff;
++      for (i = 0; i < pxakbd->pd->direct.num; i++) {
++              int pressed = 0;
++
++              if (kpdk & (1 << i)) {
++                      pressed = 1;
++                      num_pressed++;
++                      DEBUGP("pxakbd: pressed: direct %u\n", i);
++              }
++              if (pxakbd->pd->direct.keycode[i] != KEY_RESERVED) {
++                      DEBUGP( "pxakbd: sending to input layer: keycode = %d, pressed = %d\n", pxakbd->pd->direct.keycode[i], pressed );
++                      input_report_key(pxakbd->input, pxakbd->pd->direct.keycode[i],
++                      pressed);
++              }
++      }
++      return num_pressed;
++}
++
++/* read the full 8x8 matrix from the PXA27x keypad controller */
++static inline void __read_matrix(u_int8_t *matrix)
++{
++      u_int32_t tmp;
++      u_int8_t row;
++
++      /* Fill the matrix by rows */
++
++      tmp = KPASMKP0;
++      for (row=0; row<8; row++) {
++              /* zero the matrix on the first time, then keep ORing */
++              matrix[row] = ((tmp >> row) & 1);
++              matrix[row] |= ((tmp >> (16 + row)) & 1) << 1;
++      }
++
++      tmp = KPASMKP1;
++      for (row=0; row<8; row++) {
++              matrix[row] |= ((tmp >> row) & 1) << 2;
++              matrix[row] |= ((tmp >> (16 + row)) & 1) << 3;
++      }
++
++      tmp = KPASMKP2;
++      for (row=0; row<8; row++) {
++              matrix[row] |= ((tmp >> row) & 1) << 4;
++              matrix[row] |= ((tmp >> (16 + row)) & 1) << 5;
++      }
++
++      tmp = KPASMKP3;
++      for (row=0; row<8; row++) {
++              matrix[row] |= ((tmp >> row) & 1) << 6;
++              matrix[row] |= ((tmp >> (16 + row)) & 1) << 7;
++      }
++}
++
++/* compare current matrix with last, generate 'diff' events */
++static int __cmp_matrix_gen_events(struct pxakbd *pxakbd, u_int8_t *matrix)
++{
++      unsigned int i;
++      int num_pressed = 0;
++
++      /* iterate over the matrix */
++      for (i = 0; i < pxakbd->pd->matrix.rows; i++) {
++              unsigned int j;
++              for (j = 0; j < pxakbd->pd->matrix.cols; j++) {
++                      u_int32_t scancode =
++                              (i * pxakbd->pd->matrix.cols) + j;
++                      int pressed = matrix[i] & (1 << j);
++
++                      if (pressed) {
++                              DEBUGP("pxakbd: pressed: %u/%u\n", i, j);
++                              num_pressed++;
++                      }
++
++                      input_report_key(pxakbd->input,
++                                       pxakbd->pd->matrix.keycode[scancode], pressed);
++              }
++      }
++
++      return num_pressed;
++}
++
++/* scan the matrix keypad */
++static int pxakbd_scan_matrix(struct pxakbd *pxakbd)
++{
++      int num_pressed;
++      u_int32_t kpas;
++      u_int8_t matrix[8];
++
++      kpas = KPAS;
++
++      if ((kpas & KPAS_MUKP) == KPAS_MUKP_NONE) {
++              /* no keys pressed */
++              memset(matrix, 0, sizeof(matrix));
++      } else if ((kpas & KPAS_MUKP) == KPAS_MUKP_ONE) {
++              /* one key pressed */
++              u_int8_t row = (kpas & KPAS_RP) >> 4;
++              u_int8_t col = kpas & KPAS_CP;
++
++              if (row == 0x0f || col == 0x0f) {
++                      printk(KERN_WARNING "pxakbd: col or row invalid!\n");
++                      return -1;
++              }
++
++              /* clear the matrix and set the single pressed key */
++              memset(matrix, 0, sizeof(matrix));
++              matrix[row] |= (1 << col);
++      } else {
++              /* multiple keys pressed */
++              __read_matrix(matrix);
++      }
++
++      num_pressed = __cmp_matrix_gen_events(pxakbd, matrix);
++
++      return num_pressed;
++}
++
++static void pxakbd_timer_callback(unsigned long data)
++{
++      unsigned long flags;
++      struct pxakbd *pxakbd = (struct pxakbd *) data;
++      unsigned int num_pressed;
++
++      spin_lock_irqsave(&pxakbd->lock, flags);
++
++      num_pressed = pxakbd_scan_direct(pxakbd);
++      num_pressed += pxakbd_scan_matrix(pxakbd);
++
++      spin_unlock_irqrestore(&pxakbd->lock, flags);
++
++      /* propagate events up the input stack */
++      input_sync(pxakbd->input);
++}
++
++static irqreturn_t pxakbd_interrupt(int irq, void *dummy)
++{
++      struct pxakbd *pxakbd = dummy;
++      u_int32_t kpc;
++      int handled = 0;
++      int num_pressed = 0;
++
++      /* read and clear interrupt */
++      kpc = KPC;
++
++      if (kpc & KPC_DI) {
++              num_pressed += pxakbd_scan_direct(pxakbd);
++              handled = 1;
++      }
++
++      if (kpc & KPC_MI) {
++              while (KPAS & KPAS_SO) {
++                      /* wait for scan to complete beforereading scan regs */
++                      cpu_relax();
++              }
++              num_pressed += pxakbd_scan_matrix(pxakbd);
++              handled = 1;
++      }
++
++      /* If any keys are currently pressed, we need to start the timer to detect
++       * key release. */
++      if (num_pressed)
++              mod_timer(&pxakbd->timer, jiffies + pxakbd->pd->scan_interval);
++
++      /* propagate events up the input stack */
++      input_sync(pxakbd->input);
++
++      return IRQ_RETVAL(handled);
++}
++
++static int __init pxakbd_probe(struct platform_device *pdev)
++{
++      struct pxakbd *pxakbd;
++      struct input_dev *input_dev;
++      struct resource *r;
++      int i;
++      int ret = -ENOMEM;
++
++      int rows, cols, n_direct;
++
++      if (!pdev->dev.platform_data) {
++              printk(KERN_ERR "pxakbd: platform data not set\n");
++              ret = -ENODEV;
++              goto out;
++      }
++
++      pxakbd = kzalloc(sizeof(*pxakbd), GFP_KERNEL);
++      if (!pxakbd)
++              goto out;
++
++      input_dev = input_allocate_device();
++      if (!input_dev)
++              goto out_pxa;
++
++      spin_lock_init(&pxakbd->lock);
++      pxakbd->irq = platform_get_irq(pdev, 0);
++      r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      if (!r || pxakbd->irq == NO_IRQ) {
++              printk(KERN_ERR "pxakbd: invalid resources\n");
++              ret = -EBUSY;
++              goto out_idev;
++      }
++
++      pxakbd->input = input_dev;
++      init_timer(&pxakbd->timer);
++      pxakbd->timer.function = pxakbd_timer_callback;
++      pxakbd->timer.data = (unsigned long) pxakbd;
++      pxakbd->pd = pdev->dev.platform_data;
++      pxakbd->res = r;
++
++      rows = pxakbd->pd->matrix.rows;
++      cols = pxakbd->pd->matrix.cols;
++      n_direct = pxakbd->pd->direct.num;
++
++      input_dev->name = "pxa-keyboard";
++      input_dev->phys = "pxakbd/input0";
++      input_dev->id.bustype = BUS_HOST;
++      input_dev->id.vendor = 0x0001;
++      input_dev->id.product = 0x0001;
++      input_dev->id.version = 0x0001;
++      input_dev->cdev.dev = &pdev->dev;
++      input_dev->private = pxakbd;
++
++      input_dev->evbit[0] = BIT(EV_KEY)|BIT(EV_REP);
++
++      input_dev->keycodesize = sizeof(unsigned char);
++      input_dev->keycodemax = (rows*cols)+n_direct;
++      input_dev->keycode = kmalloc(input_dev->keycodemax*input_dev->keycodesize,
++                    GFP_KERNEL);
++      if (!input_dev->keycode){
++             ret = -ENOMEM;
++             goto out_idev;
++      }
++
++      memcpy(input_dev->keycode, pxakbd->pd->matrix.keycode, rows*cols);
++
++      memcpy(input_dev->keycode+(rows*cols),
++                    pxakbd->pd->direct.keycode,
++                    n_direct);
++
++      for (i = 0; i < rows*cols; i++)
++              set_bit(pxakbd->pd->matrix.keycode[i], input_dev->keybit);
++
++      for (i = 0; i < n_direct; i++)
++              set_bit(pxakbd->pd->direct.keycode[i], input_dev->keybit);
++
++      clear_bit(0, input_dev->keybit);
++
++      if (request_irq(pxakbd->irq, pxakbd_interrupt, 0, "pxakbd", pxakbd)) {
++              printk(KERN_ERR "pxakbd: can't request irq %d\n", pxakbd->irq);
++              ret = -EBUSY;
++              goto out_idev;
++      }
++
++      r = request_mem_region(r->start, 0x4c, "pxakbd");
++      if (!r) {
++              printk(KERN_ERR "pxakbd: can't request memregion\n");
++              ret = -EBUSY;
++              goto out_irq;
++      }
++
++      /* set up gpio */
++      pxakbd->pd->init();
++
++      /* set keypad control register */
++      KPC = (KPC_ASACT |         /* automatic scan on activity */
++              KPC_ME | KPC_DE |   /* matrix and direct keypad enabled */
++              ((pxakbd->pd->matrix.cols-1)<<23) | /* columns */
++              ((pxakbd->pd->matrix.rows-1)<<26) | /* rows */
++              ((pxakbd->pd->direct.num-1)<<6) | /* direct keys */
++              KPC_MS_ALL); /* scan all columns */
++
++      pxa_set_cken(CKEN_KEYPAD, 1);
++
++      KPC |= (KPC_DIE | KPC_MIE); /* enable matrix and direct keyboard */
++
++      KPKDI = 0x40;   /* matrix key debounce interval: 0x40 */
++
++      platform_set_drvdata(pdev, pxakbd);
++
++      return input_register_device(pxakbd->input);
++
++out_drvdata:
++      platform_set_drvdata(pdev, NULL);
++out_mem:
++      release_resource(r);
++out_irq:
++      free_irq(pxakbd->irq, pxakbd);
++out_idev:
++      kfree(input_dev->keycode);
++      input_free_device(input_dev);
++out_pxa:
++      kfree(pxakbd);
++out:
++      return ret;
++}
++
++static int pxakbd_remove(struct platform_device *pdev)
++{
++      struct pxakbd *pxakbd = platform_get_drvdata(pdev);
++
++      kfree(pxakbd->input->keycode);
++      input_unregister_device(pxakbd->input);
++      platform_set_drvdata(pdev, NULL);
++      release_resource(pxakbd->res);
++      free_irq(pxakbd->irq, pxakbd);
++      kfree(pxakbd);
++
++      return 0;
++}
++
++static int pxakbd_suspend(struct platform_device *pdev, pm_message_t state)
++{
++       struct pxakbd *pxakbd = platform_get_drvdata(pdev);
++
++       pxakbd->kpc = KPC;
++       pxakbd->kpkdi = KPKDI;
++
++       return 0;
++}
++
++static int pxakbd_resume(struct platform_device *pdev)
++{
++       struct pxakbd *pxakbd = platform_get_drvdata(pdev);
++
++       KPC = pxakbd->kpc;
++       KPKDI = pxakbd->kpkdi;
++
++       return 0;
++}
++
++static struct platform_driver pxakbd_driver = {
++      .probe          = &pxakbd_probe,
++      .remove         = &pxakbd_remove,
++      .suspend        = &pxakbd_suspend,
++      .resume         = &pxakbd_resume,
++      .driver         = {
++              .name   = "pxa-keyboard",
++      },
++};
++
++static int __devinit pxakbd_init(void)
++{
++      return platform_driver_register(&pxakbd_driver);
++}
++
++static void __exit pxakbd_exit(void)
++{
++      platform_driver_unregister(&pxakbd_driver);
++}
++
++module_init(pxakbd_init);
++module_exit(pxakbd_exit);
++
++MODULE_AUTHOR("Harald Welte <laforge@openezx.org>");
++MODULE_DESCRIPTION("Driver for Intel PXA27x keypad controller");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-pxa/pxa-regs.h
++++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h
+@@ -2271,6 +2271,11 @@
+ #define KPMK_MKP        (0x1 << 31)
+ #define KPAS_SO         (0x1 << 31)
+ #define KPASMKPx_SO     (0x1 << 31)
++#define KPAS_RP               (0x000000f0)
++#define KPAS_CP               (0x0000000f)
++#define KPAS_MUKP     (0x7c000000)
++#define KPAS_MUKP_ONE (0x04000000)
++#define KPAS_MUKP_NONE        (0x00000000)
+ 
+ /*
+  * UHC: USB Host Controller (OHCI-like) register definitions
+Index: linux-2.6.24/arch/arm/mach-pxa/pxa27x.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/pxa27x.c
++++ linux-2.6.24/arch/arm/mach-pxa/pxa27x.c
+@@ -451,6 +451,7 @@
+       &pxa_device_rtc,
+       &pxa27x_device_i2c_power,
+       &pxa27x_device_ohci,
++  &pxa_device_kbd,
+ };
+ 
+ static int __init pxa27x_init(void)
+Index: linux-2.6.24/arch/arm/mach-pxa/devices.h
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/devices.h
++++ linux-2.6.24/arch/arm/mach-pxa/devices.h
+@@ -9,6 +9,7 @@
+ extern struct platform_device pxa_device_i2s;
+ extern struct platform_device pxa_device_ficp;
+ extern struct platform_device pxa_device_rtc;
++extern struct platform_device pxa_device_kbd;
+ 
+ extern struct platform_device pxa27x_device_i2c_power;
+ extern struct platform_device pxa27x_device_ohci;

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pxa27x-udc-fix-a1200.patch b/packages/linux/linux-ezx-2.6.24/patches/pxa27x-udc-fix-a1200.patch
new file mode 100644 (file)
index 0000000..4b9a9ab
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pxa27x-udc-fix-a1200.patch
@@ -0,0 +1,45 @@
+This hack hardcodes pxa27x-udc to ether_gadget. This is just a temp workaround.
+Index: linux-2.6.24/drivers/usb/gadget/ether.c
+===================================================================
+--- linux-2.6.24.orig/drivers/usb/gadget/ether.c
++++ linux-2.6.24/drivers/usb/gadget/ether.c
+@@ -2687,10 +2687,16 @@
+ MODULE_LICENSE ("GPL");
+ 
+ 
+-static int __init init (void)
++// Alex add FIXME
++int usb_ether_init (void)
+ {
+       return usb_gadget_register_driver (&eth_driver);
+ }
++
++static int __init init (void)
++{
++//    return usb_gadget_register_driver (&eth_driver);
++}
+ module_init (init);
+ 
+ static void __exit cleanup (void)
+Index: linux-2.6.24/drivers/usb/gadget/pxa27x_udc.c
+===================================================================
+--- linux-2.6.24.orig/drivers/usb/gadget/pxa27x_udc.c
++++ linux-2.6.24/drivers/usb/gadget/pxa27x_udc.c
+@@ -65,6 +65,8 @@
+ //#include <asm/arch/udc.h>
+ #include <asm/mach/udc_pxa2xx.h>
+ 
++extern int usb_ether_init(void);
++
+ /*
+  * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x
+  * series processors.
+@@ -2277,6 +2279,8 @@
+       udc_init_ep(udc);
+       udc_reinit(udc);
+ 
++      usb_ether_init();  // Alex add FIXME
++
+       /* irq setup after old hardware state is cleaned up */
+       retval = request_irq(irq, pxa27x_udc_irq, 0, driver_name, udc);
+       if (retval != 0) {

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pxa27x-udc-support.3.patch b/packages/linux/linux-ezx-2.6.24/patches/pxa27x-udc-support.3.patch
new file mode 100644 (file)
index 0000000..5823e80
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pxa27x-udc-support.3.patch
@@ -0,0 +1,3114 @@
+Index: linux-2.6.24/arch/arm/mach-pxa/generic.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-pxa/generic.c
++++ linux-2.6.24/arch/arm/mach-pxa/generic.c
+@@ -290,7 +290,11 @@
+ static u64 udc_dma_mask = ~(u32)0;
+ 
+ struct platform_device pxa_device_udc = {
++#ifdef CONFIG_PXA27x
++      .name           = "pxa27x-udc",
++#else
+       .name           = "pxa2xx-udc",
++#endif
+       .id             = -1,
+       .resource       = pxa2xx_udc_resources,
+       .num_resources  = ARRAY_SIZE(pxa2xx_udc_resources),
+Index: linux-2.6.24/drivers/usb/gadget/Kconfig
+===================================================================
+--- linux-2.6.24.orig/drivers/usb/gadget/Kconfig
++++ linux-2.6.24/drivers/usb/gadget/Kconfig
+@@ -192,6 +192,24 @@
+       default USB_GADGET
+       select USB_GADGET_SELECTED
+ 
++config USB_GADGET_PXA27X
++      boolean "PXA 27x"
++      depends on ARCH_PXA && PXA27x
++      help
++         Intel's PXA 27x series XScale processors include an integrated
++         full speed USB 1.1 device controller.
++
++         Say "y" to link the driver statically, or "m" to build a
++         dynamically linked module called "pxa2xx_udc" and force all
++         gadget drivers to also be dynamically linked.
++
++
++config USB_PXA27X
++      tristate
++      depends on USB_GADGET_PXA27X
++      default USB_GADGET
++      select USB_GADGET_SELECTED
++
+ # if there's only one gadget driver, using only two bulk endpoints,
+ # don't waste memory for the other endpoints
+ config USB_PXA2XX_SMALL
+Index: linux-2.6.24/drivers/usb/gadget/Makefile
+===================================================================
+--- linux-2.6.24.orig/drivers/usb/gadget/Makefile
++++ linux-2.6.24/drivers/usb/gadget/Makefile
+@@ -9,6 +9,7 @@
+ obj-$(CONFIG_USB_NET2280)     += net2280.o
+ obj-$(CONFIG_USB_AMD5536UDC)  += amd5536udc.o
+ obj-$(CONFIG_USB_PXA2XX)      += pxa2xx_udc.o
++obj-$(CONFIG_USB_PXA27X)      += pxa27x_udc.o
+ obj-$(CONFIG_USB_GOKU)                += goku_udc.o
+ obj-$(CONFIG_USB_OMAP)                += omap_udc.o
+ obj-$(CONFIG_USB_LH7A40X)     += lh7a40x_udc.o
+Index: linux-2.6.24/drivers/usb/gadget/epautoconf.c
+===================================================================
+--- linux-2.6.24.orig/drivers/usb/gadget/epautoconf.c
++++ linux-2.6.24/drivers/usb/gadget/epautoconf.c
+@@ -230,7 +230,8 @@
+  */
+ struct usb_ep * __devinit usb_ep_autoconfig (
+       struct usb_gadget               *gadget,
+-      struct usb_endpoint_descriptor  *desc
++      struct usb_endpoint_descriptor  *desc,
++      int config, int interface, int alt
+ )
+ {
+       struct usb_ep   *ep;
+@@ -238,6 +239,11 @@
+ 
+       type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ 
++      /* If have ep_alloc() function use it! */
++      if (gadget->ops->ep_alloc)
++              return gadget->ops->ep_alloc(gadget, desc,
++                                           config, interface, alt);
++
+       /* First, apply chip-specific "best usage" knowledge.
+        * This might make a good usb_gadget_ops hook ...
+        */
+Index: linux-2.6.24/drivers/usb/gadget/ether.c
+===================================================================
+--- linux-2.6.24.orig/drivers/usb/gadget/ether.c
++++ linux-2.6.24/drivers/usb/gadget/ether.c
+@@ -235,10 +235,6 @@
+ #define       DEV_CONFIG_CDC
+ #endif
+ 
+-#ifdef CONFIG_USB_GADGET_PXA27X
+-#define DEV_CONFIG_CDC
+-#endif
+-
+ #ifdef CONFIG_USB_GADGET_S3C2410
+ #define DEV_CONFIG_CDC
+ #endif
+@@ -270,6 +266,10 @@
+ #define       DEV_CONFIG_SUBSET
+ #endif
+ 
++#ifdef CONFIG_USB_GADGET_PXA27X
++#define DEV_CONFIG_SUBSET
++#endif
++
+ #ifdef CONFIG_USB_GADGET_SUPERH
+ #define       DEV_CONFIG_SUBSET
+ #endif
+@@ -1012,13 +1012,12 @@
+ static int
+ set_ether_config (struct eth_dev *dev, gfp_t gfp_flags)
+ {
+-      int                                     result = 0;
+-      struct usb_gadget                       *gadget = dev->gadget;
++      int result = 0;
+ 
+ #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+       /* status endpoint used for RNDIS and (optionally) CDC */
+       if (!subset_active(dev) && dev->status_ep) {
+-              dev->status = ep_desc (gadget, &hs_status_desc,
++              dev->status = ep_desc (dev->gadget, &hs_status_desc,
+                                               &fs_status_desc);
+               dev->status_ep->driver_data = dev;
+ 
+@@ -1031,10 +1030,10 @@
+       }
+ #endif
+ 
+-      dev->in = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
++      dev->in = ep_desc(dev->gadget, &hs_source_desc, &fs_source_desc);
+       dev->in_ep->driver_data = dev;
+ 
+-      dev->out = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
++      dev->out = ep_desc(dev->gadget, &hs_sink_desc, &fs_sink_desc);
+       dev->out_ep->driver_data = dev;
+ 
+       /* With CDC,  the host isn't allowed to use these two data
+@@ -2298,6 +2297,9 @@
+                * non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
+                */
+               cdc = 0;
++      } else if (gadget_is_pxa27x(gadget)) {
++              /* hardware can't write zlps */
++              zlp = 0;
+       }
+ 
+       gcnum = usb_gadget_controller_number (gadget);
+@@ -2364,7 +2366,22 @@
+ 
+       /* all we really need is bulk IN/OUT */
+       usb_ep_autoconfig_reset (gadget);
+-      in_ep = usb_ep_autoconfig (gadget, &fs_source_desc);
++#ifdef CONFIG_USB_ETH_RNDIS
++      in_ep = usb_ep_autoconfig (gadget, &fs_source_desc,
++                              DEV_RNDIS_CONFIG_VALUE,
++                              (int)rndis_data_intf.bInterfaceNumber,
++                              (int)rndis_data_intf.bAlternateSetting);
++#elif  defined(DEV_CONFIG_CDC)
++      in_ep = usb_ep_autoconfig (gadget, &fs_source_desc,
++                              DEV_CONFIG_VALUE,
++                              (int)data_intf.bInterfaceNumber,
++                              (int)data_intf.bAlternateSetting);
++#elif  defined(DEV_CONFIG_SUBSET)
++      in_ep = usb_ep_autoconfig (gadget, &fs_source_desc,
++                              DEV_CONFIG_VALUE,
++                              (int)subset_data_intf.bInterfaceNumber,
++                              (int)subset_data_intf.bAlternateSetting);
++#endif /* CONFIG_USB_ETH_RNDIS */
+       if (!in_ep) {
+ autoconf_fail:
+               dev_err (&gadget->dev,
+@@ -2374,7 +2391,23 @@
+       }
+       in_ep->driver_data = in_ep;     /* claim */
+ 
+-      out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
++#ifdef CONFIG_USB_ETH_RNDIS
++       out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc,
++                       DEV_RNDIS_CONFIG_VALUE,
++                       (int)rndis_data_intf.bInterfaceNumber,
++                       (int)rndis_data_intf.bAlternateSetting);
++#elif  defined(DEV_CONFIG_CDC)
++       out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc,
++                       DEV_CONFIG_VALUE,
++                       (int)data_intf.bInterfaceNumber,
++                       (int)data_intf.bAlternateSetting);
++#elif  defined(DEV_CONFIG_SUBSET)
++       out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc,
++                       DEV_CONFIG_VALUE,
++                       (int)subset_data_intf.bInterfaceNumber,
++                       (int)subset_data_intf.bAlternateSetting);
++#endif /* CONFIG_USB_ETH_RNDIS */
++
+       if (!out_ep)
+               goto autoconf_fail;
+       out_ep->driver_data = out_ep;   /* claim */
+@@ -2384,7 +2417,18 @@
+        * Since some hosts expect one, try to allocate one anyway.
+        */
+       if (cdc || rndis) {
+-              status_ep = usb_ep_autoconfig (gadget, &fs_status_desc);
++#ifdef CONFIG_USB_ETH_RNDIS
++       status_ep = usb_ep_autoconfig (gadget, &fs_status_desc,
++                       DEV_RNDIS_CONFIG_VALUE,
++                       (int)rndis_control_intf.bInterfaceNumber,
++                       (int)rndis_control_intf.bAlternateSetting);
++#elif  defined(DEV_CONFIG_CDC)
++       status_ep = usb_ep_autoconfig (gadget, &fs_status_desc,
++                       DEV_CONFIG_VALUE,
++                       (int)control_intf.bInterfaceNumber,
++                       (int)control_intf.bAlternateSetting);
++#endif /* CONFIG_USB_ETH_RNDIS */
++
+               if (status_ep) {
+                       status_ep->driver_data = status_ep;     /* claim */
+               } else if (rndis) {
+@@ -2392,13 +2436,14 @@
+                               "can't run RNDIS on %s\n",
+                               gadget->name);
+                       return -ENODEV;
++              }
+ #ifdef DEV_CONFIG_CDC
+-              /* pxa25x only does CDC subset; often used with RNDIS */
+-              } else if (cdc) {
++                /* pxa25x only does CDC subset; often used with RNDIS */
++              else if (cdc) {
+                       control_intf.bNumEndpoints = 0;
+                       /* FIXME remove endpoint from descriptor list */
+-#endif
+               }
++#endif
+       }
+ #endif
+ 
+Index: linux-2.6.24/drivers/usb/gadget/file_storage.c
+===================================================================
+--- linux-2.6.24.orig/drivers/usb/gadget/file_storage.c
++++ linux-2.6.24/drivers/usb/gadget/file_storage.c
+@@ -3877,20 +3877,20 @@
+ 
+       /* Find all the endpoints we will use */
+       usb_ep_autoconfig_reset(gadget);
+-      ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc);
++      ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc, 0, 0, 0);
+       if (!ep)
+               goto autoconf_fail;
+       ep->driver_data = fsg;          // claim the endpoint
+       fsg->bulk_in = ep;
+ 
+-      ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc);
++      ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc, 0, 0, 0);
+       if (!ep)
+               goto autoconf_fail;
+       ep->driver_data = fsg;          // claim the endpoint
+       fsg->bulk_out = ep;
+ 
+       if (transport_is_cbi()) {
+-              ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc);
++              ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc, 0, 0, 0);
+               if (!ep)
+                       goto autoconf_fail;
+               ep->driver_data = fsg;          // claim the endpoint
+Index: linux-2.6.24/drivers/usb/gadget/gmidi.c
+===================================================================
+--- linux-2.6.24.orig/drivers/usb/gadget/gmidi.c
++++ linux-2.6.24/drivers/usb/gadget/gmidi.c
+@@ -1188,7 +1188,7 @@
+        * but there may also be important quirks to address.
+        */
+       usb_ep_autoconfig_reset(gadget);
+-      in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc);
++      in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc, 0, 0, 0);
+       if (!in_ep) {
+ autoconf_fail:
+               printk(KERN_ERR "%s: can't autoconfigure on %s\n",
+@@ -1198,7 +1198,7 @@
+       EP_IN_NAME = in_ep->name;
+       in_ep->driver_data = in_ep;     /* claim */
+ 
+-      out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc);
++      out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc, 0, 0, 0);
+       if (!out_ep) {
+               goto autoconf_fail;
+       }
+Index: linux-2.6.24/drivers/usb/gadget/pxa27x_udc.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/usb/gadget/pxa27x_udc.c
+@@ -0,0 +1,2410 @@
++/*
++ * linux/drivers/usb/gadget/pxa27x_udc.c
++ * Intel PXA2xx and IXP4xx on-chip full speed USB device controllers
++ *
++ * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
++ * Copyright (C) 2003 Robert Schwebel, Pengutronix
++ * Copyright (C) 2003 Benedikt Spranger, Pengutronix
++ * Copyright (C) 2003 David Brownell
++ * Copyright (C) 2003 Joshua Wise
++ * Copyright (C) 2004 Intel Corporation
++ * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ *
++ */
++
++#undef DEBUG
++/* #define    VERBOSE DBG_VERBOSE */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/ioport.h>
++#include <linux/types.h>
++#include <linux/version.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/timer.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/proc_fs.h>
++#include <linux/mm.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++
++#include <asm/byteorder.h>
++#include <asm/dma.h>
++#include <asm/gpio.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/mach-types.h>
++#include <asm/unaligned.h>
++#include <asm/hardware.h>
++//#include <asm/arch/pxa-regs.h>
++
++#include <linux/usb/ch9.h>
++#include <linux/usb/gadget.h>
++
++//#include <asm/arch/udc.h>
++#include <asm/mach/udc_pxa2xx.h>
++
++/*
++ * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x
++ * series processors.
++ * Such controller drivers work with a gadget driver.  The gadget driver
++ * returns descriptors, implements configuration and data protocols used
++ * by the host to interact with this device, and allocates endpoints to
++ * the different protocol interfaces.  The controller driver virtualizes
++ * usb hardware so that the gadget drivers will be more portable.
++ *
++ * This UDC hardware wants to implement a bit too much USB protocol, so
++ * it constrains the sorts of USB configuration change events that work.
++ * The errata for these chips are misleading; some "fixed" bugs from
++ * pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
++ */
++
++#define       DRIVER_VERSION  "28-Jun-2007"
++#define       DRIVER_DESC     "PXA 27x USB Device Controller driver"
++
++static const char driver_name[] = "pxa27x_udc";
++
++static const char ep0name[] = "ep0";
++
++#undef        USE_DMA
++#undef        DISABLE_TEST_MODE
++
++#ifdef CONFIG_PROC_FS
++#define       UDC_PROC_FILE
++#endif
++
++#include "pxa27x_udc.h"
++
++#ifdef CONFIG_EMBEDDED
++/* few strings, and little code to use them */
++#undef        DEBUG
++#undef        UDC_PROC_FILE
++#endif
++
++#ifdef        USE_DMA
++static int use_dma = 1;
++module_param(use_dma, bool, 0);
++MODULE_PARM_DESC(use_dma, "true to use dma");
++
++static void dma_nodesc_handler(int dmach, void *_ep);
++static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req);
++
++#define       DMASTR " (dma support)"
++
++#else                         /* !USE_DMA */
++#define       DMASTR " (pio only)"
++#endif
++
++#ifdef        CONFIG_USB_PXA27X_SMALL
++#define SIZE_STR      " (small)"
++#else
++#define SIZE_STR      ""
++#endif
++
++#ifdef DISABLE_TEST_MODE
++/* (mode == 0) == no undocumented chip tweaks
++ * (mode & 1)  == double buffer bulk IN
++ * (mode & 2)  == double buffer bulk OUT
++ * ... so mode = 3 (or 7, 15, etc) does it for both
++ */
++static ushort fifo_mode = 0;
++module_param(fifo_mode, ushort, 0);
++MODULE_PARM_DESC(fifo_mode, "pxa27x udc fifo mode");
++#endif
++
++#define UDCISR0_IR0    0x3
++#define UDCISR_INT_MASK        (UDC_INT_FIFOERROR | UDC_INT_PACKETCMP)
++#define UDCICR_INT_MASK        UDCISR_INT_MASK
++
++#define UDCCSR_MASK   (UDCCSR_FST | UDCCSR_DME)
++/* ---------------------------------------------------------------------------
++ *    endpoint related parts of the api to the usb controller hardware,
++ *    used by gadget driver; and the inner talker-to-hardware core.
++ * ---------------------------------------------------------------------------
++ */
++
++static void pxa27x_ep_fifo_flush(struct usb_ep *ep);
++static void nuke(struct pxa27x_ep *, int status);
++
++/* one GPIO should control a D+ pullup, so host sees this device (or not) */
++static void pullup_off(void)
++{
++      struct pxa2xx_udc_mach_info *mach = the_controller->mach;
++
++      if (mach->gpio_pullup)
++              gpio_set_value(mach->gpio_pullup, 0);
++      else if (mach->udc_command)
++              mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
++}
++
++static void pullup_on(void)
++{
++      struct pxa2xx_udc_mach_info *mach = the_controller->mach;
++
++      if (mach->gpio_pullup)
++              gpio_set_value(mach->gpio_pullup, 1);
++      else if (mach->udc_command)
++              mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
++}
++
++static void pio_irq_enable(int ep_num)
++{
++      if (ep_num < 16)
++              UDCICR0 |= 3 << (ep_num * 2);
++      else {
++              ep_num -= 16;
++              UDCICR1 |= 3 << (ep_num * 2);
++      }
++}
++
++static void pio_irq_disable(int ep_num)
++{
++      ep_num &= 0xf;
++      if (ep_num < 16)
++              UDCICR0 &= ~(3 << (ep_num * 2));
++      else {
++              ep_num -= 16;
++              UDCICR1 &= ~(3 << (ep_num * 2));
++      }
++}
++
++/* The UDCCR reg contains mask and interrupt status bits,
++ * so using '|=' isn't safe as it may ack an interrupt.
++ */
++#define UDCCR_MASK_BITS         (UDCCR_OEN | UDCCR_UDE)
++
++static inline void udc_set_mask_UDCCR(int mask)
++{
++      UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
++}
++
++static inline void udc_clear_mask_UDCCR(int mask)
++{
++      UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
++}
++
++static inline void udc_ack_int_UDCCR(int mask)
++{
++      /* udccr contains the bits we dont want to change */
++      __u32 udccr = UDCCR & UDCCR_MASK_BITS;
++
++      UDCCR = udccr | (mask & ~UDCCR_MASK_BITS);
++}
++
++/*
++ * endpoint enable/disable
++ *
++ * we need to verify the descriptors used to enable endpoints.  since pxa27x
++ * endpoint configurations are fixed, and are pretty much always enabled,
++ * there's not a lot to manage here.
++ *
++ * because pxa27x can't selectively initialize bulk (or interrupt) endpoints,
++ * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
++ * for a single interface (with only the default altsetting) and for gadget
++ * drivers that don't halt endpoints (not reset by set_interface).  that also
++ * means that if you use ISO, you must violate the USB spec rule that all
++ * iso endpoints must be in non-default altsettings.
++ */
++static int pxa27x_ep_enable(struct usb_ep *_ep,
++                          const struct usb_endpoint_descriptor *desc)
++{
++      struct pxa27x_ep *ep;
++      struct pxa27x_udc *dev;
++
++      ep = container_of(_ep, struct pxa27x_ep, ep);
++      if (!_ep || !desc || _ep->name == ep0name
++          || desc->bDescriptorType != USB_DT_ENDPOINT
++          || ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
++              DMSG("%s, bad ep or descriptor\n", __FUNCTION__);
++              return -EINVAL;
++      }
++
++      /* xfer types must match, except that interrupt ~= bulk */
++      if (ep->ep_type != USB_ENDPOINT_XFER_BULK
++          && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
++              DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
++              return -EINVAL;
++      }
++
++      /* hardware _could_ do smaller, but driver doesn't */
++      if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
++           && le16_to_cpu(desc->wMaxPacketSize)
++           != BULK_FIFO_SIZE)
++          || !desc->wMaxPacketSize) {
++              DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
++              return -ERANGE;
++      }
++
++      dev = ep->dev;
++      if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
++              DMSG("%s, bogus device state\n", __FUNCTION__);
++              return -ESHUTDOWN;
++      }
++
++      ep->desc = desc;
++      ep->dma = -1;
++      ep->stopped = 0;
++      ep->pio_irqs = ep->dma_irqs = 0;
++      ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
++
++      /* flush fifo (mostly for OUT buffers) */
++      pxa27x_ep_fifo_flush(_ep);
++
++      /* ... reset halt state too, if we could ... */
++
++#ifdef USE_DMA
++      /* for (some) bulk and ISO endpoints, try to get a DMA channel and
++       * bind it to the endpoint.  otherwise use PIO.
++       */
++      DMSG("%s: called attributes=%d\n", __FUNCTION__, ep->ep_type);
++      switch (ep->ep_type) {
++      case USB_ENDPOINT_XFER_ISOC:
++              if (le16_to_cpu(desc->wMaxPacketSize) % 32)
++                      break;
++              /* fall through */
++      case USB_ENDPOINT_XFER_BULK:
++              if (!use_dma || !ep->reg_drcmr)
++                      break;
++              ep->dma = pxa_request_dma((char *)_ep->name,
++                                (le16_to_cpu(desc->wMaxPacketSize) > 64)
++                                        ? DMA_PRIO_MEDIUM     /* some iso */
++                                        : DMA_PRIO_LOW,
++                                        dma_nodesc_handler, ep);
++              if (ep->dma >= 0) {
++                      *ep->reg_drcmr = DRCMR_MAPVLD | ep->dma;
++                      DMSG("%s using dma%d\n", _ep->name, ep->dma);
++              }
++      default:
++              break;
++      }
++#endif
++      DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
++      return 0;
++}
++
++static int pxa27x_ep_disable(struct usb_ep *_ep)
++{
++      struct pxa27x_ep *ep;
++
++      ep = container_of(_ep, struct pxa27x_ep, ep);
++      if (!_ep || !ep->desc) {
++              DMSG("%s, %s not enabled\n", __FUNCTION__,
++                   _ep ? ep->ep.name : NULL);
++              return -EINVAL;
++      }
++      nuke(ep, -ESHUTDOWN);
++
++#ifdef        USE_DMA
++      if (ep->dma >= 0) {
++              *ep->reg_drcmr = 0;
++              pxa_free_dma(ep->dma);
++              ep->dma = -1;
++      }
++#endif
++
++      /* flush fifo (mostly for IN buffers) */
++      pxa27x_ep_fifo_flush(_ep);
++
++      ep->desc = 0;
++      ep->stopped = 1;
++
++      DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
++      return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* for the pxa27x, these can just wrap kmalloc/kfree.  gadget drivers
++ * must still pass correctly initialized endpoints, since other controller
++ * drivers may care about how it's currently set up (dma issues etc).
++ */
++
++/*
++ *    pxa27x_ep_alloc_request - allocate a request data structure
++ */
++static struct usb_request *pxa27x_ep_alloc_request(struct usb_ep *_ep,
++                                                 unsigned int gfp_flags)
++{
++      struct pxa27x_request *req;
++
++      req = kmalloc(sizeof *req, gfp_flags);
++      if (!req)
++              return 0;
++
++      memset(req, 0, sizeof *req);
++      INIT_LIST_HEAD(&req->queue);
++      return &req->req;
++}
++
++/*
++ *    pxa27x_ep_free_request - deallocate a request data structure
++ */
++static void pxa27x_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
++{
++      struct pxa27x_request *req;
++
++      req = container_of(_req, struct pxa27x_request, req);
++      WARN_ON(!list_empty(&req->queue));
++      kfree(req);
++}
++
++/* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's
++ * no device-affinity and the heap works perfectly well for i/o buffers.
++ * It wastes much less memory than dma_alloc_coherent() would, and even
++ * prevents cacheline (32 bytes wide) sharing problems.
++ */
++static void *pxa27x_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
++                                  dma_addr_t * dma, unsigned int gfp_flags)
++{
++      char *retval;
++
++      retval = kmalloc(bytes, gfp_flags & ~(__GFP_DMA | __GFP_HIGHMEM));
++      if (retval)
++#ifdef USE_DMA
++              *dma = virt_to_bus(retval);
++#else
++              *dma = (dma_addr_t) ~0;
++#endif
++      return retval;
++}
++
++static void
++pxa27x_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma,
++                    unsigned bytes)
++{
++      kfree(buf);
++}
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ *    done - retire a request; caller blocked irqs
++ */
++static void done(struct pxa27x_ep *ep, struct pxa27x_request *req, int status)
++{
++      list_del_init(&req->queue);
++      if (likely(req->req.status == -EINPROGRESS))
++              req->req.status = status;
++      else
++              status = req->req.status;
++
++      if (status && status != -ESHUTDOWN)
++              DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n",
++                  ep->ep.name, &req->req, status,
++                  req->req.actual, req->req.length);
++
++      /* don't modify queue heads during completion callback */
++      req->req.complete(&ep->ep, &req->req);
++}
++
++static inline void ep0_idle(struct pxa27x_udc *dev)
++{
++      dev->ep0state = EP0_IDLE;
++      LED_EP0_OFF;
++}
++
++static int
++write_packet(volatile u32 * uddr, struct pxa27x_request *req, unsigned max)
++{
++      u32 *buf;
++      int length, count, remain;
++
++      buf = (u32 *) (req->req.buf + req->req.actual);
++      prefetch(buf);
++
++      /* how big will this packet be? */
++      length = min(req->req.length - req->req.actual, max);
++      req->req.actual += length;
++
++      remain = length & 0x3;
++      count = length & ~(0x3);
++
++      while (likely(count)) {
++              *uddr = *buf++;
++              count -= 4;
++      }
++
++      if (remain) {
++              volatile u8 *reg = (u8 *) uddr;
++              char *rd = (u8 *) buf;
++
++              while (remain--) {
++                      *reg = *rd++;
++              }
++      }
++
++      return length;
++}
++
++/*
++ * write to an IN endpoint fifo, as many packets as possible.
++ * irqs will use this to write the rest later.
++ * caller guarantees at least one packet buffer is ready (or a zlp).
++ */
++static int write_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req)
++{
++      unsigned max;
++
++      max = le16_to_cpu(ep->desc->wMaxPacketSize);
++      do {
++              int count;
++              int is_last, is_short;
++
++              count = write_packet(ep->reg_udcdr, req, max);
++
++              /* last packet is usually short (or a zlp) */
++              if (unlikely(count != max))
++                      is_last = is_short = 1;
++              else {
++                      if (likely(req->req.length != req->req.actual)
++                          || req->req.zero)
++                              is_last = 0;
++                      else
++                              is_last = 1;
++                      /* interrupt/iso maxpacket may not fill the fifo */
++                      is_short = unlikely(max < ep->fifo_size);
++              }
++
++              DMSG("wrote %s count:%d bytes%s%s %d left %p\n",
++                   ep->ep.name, count,
++                   is_last ? "/L" : "", is_short ? "/S" : "",
++                   req->req.length - req->req.actual, &req->req);
++
++              /* let loose that packet. maybe try writing another one,
++               * double buffering might work.  TSP, TPC, and TFS
++               * bit values are the same for all normal IN endpoints.
++               */
++              *ep->reg_udccsr = UDCCSR_PC;
++              if (is_short)
++                      *ep->reg_udccsr = UDCCSR_SP;
++
++              /* requests complete when all IN data is in the FIFO */
++              if (is_last) {
++                      done(ep, req, 0);
++                      if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) {
++                              pio_irq_disable(ep->ep_num);
++#ifdef USE_DMA
++                              /* unaligned data and zlps couldn't use dma */
++                              if (unlikely(!list_empty(&ep->queue))) {
++                                      req = list_entry(ep->queue.next,
++                                                       struct pxa27x_request,
++                                                       queue);
++                                      kick_dma(ep, req);
++                                      return 0;
++                              }
++#endif
++                      }
++                      return 1;
++              }
++              /* TODO experiment: how robust can fifo mode tweaking be?
++               * double buffering is off in the default fifo mode, which
++               * prevents TFS from being set here.
++               */
++
++      } while (*ep->reg_udccsr & UDCCSR_FS);
++      return 0;
++}
++
++/* caller asserts req->pending (ep0 irq status nyet cleared); starts
++ * ep0 data stage.  these chips want very simple state transitions.
++ */
++static inline void ep0start(struct pxa27x_udc *dev, u32 flags, const char *tag)
++{
++      UDCCSR0 = flags | UDCCSR0_SA | UDCCSR0_OPC;
++      UDCISR0 = UDCICR_INT(0, UDC_INT_FIFOERROR | UDC_INT_PACKETCMP);
++      dev->req_pending = 0;
++      DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
++          __FUNCTION__, tag, UDCCSR0, flags);
++}
++
++static int write_ep0_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req)
++{
++      unsigned count;
++      int is_short;
++
++      count = write_packet(&UDCDR0, req, EP0_FIFO_SIZE);
++      ep->dev->stats.write.bytes += count;
++
++      /* last packet "must be" short (or a zlp) */
++      is_short = (count != EP0_FIFO_SIZE);
++
++      DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count,
++          req->req.length - req->req.actual, &req->req);
++
++      if (unlikely(is_short)) {
++              if (ep->dev->req_pending)
++                      ep0start(ep->dev, UDCCSR0_IPR, "short IN");
++              else
++                      UDCCSR0 = UDCCSR0_IPR;
++
++              count = req->req.length;
++              done(ep, req, 0);
++              ep0_idle(ep->dev);
++#if 0
++              /* This seems to get rid of lost status irqs in some cases:
++               * host responds quickly, or next request involves config
++               * change automagic, or should have been hidden, or ...
++               *
++               * FIXME get rid of all udelays possible...
++               */
++              if (count >= EP0_FIFO_SIZE) {
++                      count = 100;
++                      do {
++                              if ((UDCCSR0 & UDCCSR0_OPC) != 0) {
++                                      /* clear OPC, generate ack */
++                                      UDCCSR0 = UDCCSR0_OPC;
++                                      break;
++                              }
++                              count--;
++                              udelay(1);
++                      } while (count);
++              }
++#endif
++      } else if (ep->dev->req_pending)
++              ep0start(ep->dev, 0, "IN");
++      return is_short;
++}
++
++/*
++ * read_fifo -  unload packet(s) from the fifo we use for usb OUT
++ * transfers and put them into the request.  caller should have made
++ * sure there's at least one packet ready.
++ *
++ * returns true if the request completed because of short packet or the
++ * request buffer having filled (and maybe overran till end-of-packet).
++ */
++static int read_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req)
++{
++      for (;;) {
++              u32 *buf;
++              int bufferspace, count, is_short;
++
++              /* make sure there's a packet in the FIFO. */
++              if (unlikely((*ep->reg_udccsr & UDCCSR_PC) == 0))
++                      break;
++              buf = (u32 *) (req->req.buf + req->req.actual);
++              prefetchw(buf);
++              bufferspace = req->req.length - req->req.actual;
++
++              /* read all bytes from this packet */
++              if (likely(*ep->reg_udccsr & UDCCSR_BNE)) {
++                      count = 0x3ff & *ep->reg_udcbcr;
++                      req->req.actual += min(count, bufferspace);
++              } else          /* zlp */
++                      count = 0;
++
++              is_short = (count < ep->ep.maxpacket);
++              DMSG("read %s udccsr:%02x, count:%d bytes%s req %p %d/%d\n",
++                   ep->ep.name, *ep->reg_udccsr, count,
++                   is_short ? "/S" : "",
++                   &req->req, req->req.actual, req->req.length);
++
++#if 0
++              dump_regs(ep->ep_num );
++#endif
++              count = min(count, bufferspace);
++              while (likely(count > 0)) {
++                      *buf++ = *ep->reg_udcdr;
++                      count -= 4;
++              }
++              DMSG("Buf:0x%p\n", req->req.buf);
++
++              *ep->reg_udccsr = UDCCSR_PC;
++              /* RPC/RSP/RNE could now reflect the other packet buffer */
++
++              /* completion */
++              if (is_short || req->req.actual == req->req.length) {
++                      done(ep, req, 0);
++                      if (list_empty(&ep->queue))
++                              pio_irq_disable(ep->ep_num);
++                      return 1;
++              }
++
++              /* finished that packet.  the next one may be waiting... */
++      }
++      return 0;
++}
++
++/*
++ * special ep0 version of the above.  no UBCR0 or double buffering; status
++ * handshaking is magic.  most device protocols don't need control-OUT.
++ * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other
++ * protocols do use them.
++ */
++static int read_ep0_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req)
++{
++      u32 *buf, word;
++      unsigned bufferspace;
++
++      buf = (u32 *) (req->req.buf + req->req.actual);
++      bufferspace = req->req.length - req->req.actual;
++
++      while (UDCCSR0 & UDCCSR0_RNE) {
++              word = UDCDR0;
++
++              if (unlikely(bufferspace == 0)) {
++                      /* this happens when the driver's buffer
++                       * is smaller than what the host sent.
++                       * discard the extra data.
++                       */
++                      if (req->req.status != -EOVERFLOW)
++                              DMSG("%s overflow\n", ep->ep.name);
++                      req->req.status = -EOVERFLOW;
++              } else {
++                      *buf++ = word;
++                      req->req.actual += 4;
++                      bufferspace -= 4;
++              }
++      }
++
++      UDCCSR0 = UDCCSR0_OPC;
++
++      /* completion */
++      if (req->req.actual >= req->req.length)
++              return 1;
++
++      /* finished that packet.  the next one may be waiting... */
++      return 0;
++}
++
++#ifdef        USE_DMA
++
++#define       MAX_IN_DMA      ((DCMD_LENGTH + 1) - BULK_FIFO_SIZE)
++static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req)
++{
++      u32 dcmd = 0;
++      u32 len = req->req.length;
++      u32 buf = req->req.dma;
++      u32 fifo = io_v2p((u32) ep->reg_udcdr);
++
++      buf += req->req.actual;
++      len -= req->req.actual;
++      ep->dma_con = 0;
++
++      DMSG("%s: req:0x%p length:%d, actual:%d dma:%d\n",
++           __FUNCTION__, &req->req, req->req.length,
++           req->req.actual, ep->dma);
++
++      /* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */
++      DCSR(ep->dma) = DCSR_NODESC;
++      if (buf & 0x3)
++              DALGN |= 1 << ep->dma;
++      else
++              DALGN &= ~(1 << ep->dma);
++
++      if (ep->dir_in) {
++              DSADR(ep->dma) = buf;
++              DTADR(ep->dma) = fifo;
++              if (len > MAX_IN_DMA) {
++                      len = MAX_IN_DMA;
++                      ep->dma_con = 1;
++              } else if (len >= ep->ep.maxpacket) {
++                      if ((ep->dma_con = (len % ep->ep.maxpacket) != 0))
++                              len = ep->ep.maxpacket;
++              }
++              dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN
++                  | DCMD_FLOWTRG | DCMD_INCSRCADDR;
++      } else {
++              DSADR(ep->dma) = fifo;
++              DTADR(ep->dma) = buf;
++              dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN
++                  | DCMD_FLOWSRC | DCMD_INCTRGADDR;
++      }
++      *ep->reg_udccsr = UDCCSR_DME;
++      DCMD(ep->dma) = dcmd;
++      DCSR(ep->dma) = DCSR_NODESC | DCSR_EORIRQEN
++          | ((ep->dir_in) ? DCSR_STOPIRQEN : 0);
++      *ep->reg_drcmr = ep->dma | DRCMR_MAPVLD;
++      DCSR(ep->dma) |= DCSR_RUN;
++}
++
++static void cancel_dma(struct pxa27x_ep *ep)
++{
++      struct pxa27x_request *req;
++      u32 tmp;
++
++      if (DCSR(ep->dma) == 0 || list_empty(&ep->queue))
++              return;
++
++      DMSG("hehe dma:%d,dcsr:0x%x\n", ep->dma, DCSR(ep->dma));
++      DCSR(ep->dma) = 0;
++      while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0)
++              cpu_relax();
++
++      req = list_entry(ep->queue.next, struct pxa27x_request, queue);
++      tmp = DCMD(ep->dma) & DCMD_LENGTH;
++      req->req.actual = req->req.length - tmp;
++
++      /* the last tx packet may be incomplete, so flush the fifo.
++       * FIXME correct req.actual if we can
++       */
++      *ep->reg_udccsr = UDCCSR_FEF;
++}
++
++static void dma_nodesc_handler(int dmach, void *_ep, struct pt_regs *r)
++{
++      struct pxa27x_ep *ep = _ep;
++      struct pxa27x_request *req, *req_next;
++      u32 dcsr, tmp, completed;
++
++      local_irq_disable();
++
++      req = list_entry(ep->queue.next, struct pxa27x_request, queue);
++
++      DMSG("%s, buf:0x%p\n", __FUNCTION__, req->req.buf);
++
++      ep->dma_irqs++;
++      ep->dev->stats.irqs++;
++      HEX_DISPLAY(ep->dev->stats.irqs);
++
++      completed = 0;
++
++      dcsr = DCSR(dmach);
++      DCSR(ep->dma) &= ~DCSR_RUN;
++
++      if (dcsr & DCSR_BUSERR) {
++              DCSR(dmach) = DCSR_BUSERR;
++              printk(KERN_ERR " Buss Error\n");
++              req->req.status = -EIO;
++              completed = 1;
++      } else if (dcsr & DCSR_ENDINTR) {
++              DCSR(dmach) = DCSR_ENDINTR;
++              if (ep->dir_in) {
++                      tmp = req->req.length - req->req.actual;
++                      /* Last packet is a short one */
++                      if (tmp < ep->ep.maxpacket) {
++                              int count = 0;
++
++                              *ep->reg_udccsr = UDCCSR_SP |
++                                  (*ep->reg_udccsr & UDCCSR_MASK);
++                              /*Wait for packet out */
++                              while ((count++ < 10000) &&
++                                     !(*ep->reg_udccsr & UDCCSR_FS)) ;
++                              if (count >= 10000)
++                                      DMSG("Failed to send packet\n");
++                              else
++                                      DMSG("%s: short packet sent len:%d,"
++                                           "length:%d,actual:%d\n",
++                                           __FUNCTION__, tmp, req->req.length,
++                                           req->req.actual);
++                              req->req.actual = req->req.length;
++                              completed = 1;
++                              /* There are still packets to transfer */
++                      } else if (ep->dma_con) {
++                              DMSG("%s: more packets,length:%d,actual:%d\n",
++                                   __FUNCTION__, req->req.length,
++                                   req->req.actual);
++                              req->req.actual += ep->ep.maxpacket;
++                              completed = 0;
++                      } else {
++                              DMSG("%s: no more packets,length:%d,"
++                                   "actual:%d\n", __FUNCTION__,
++                                   req->req.length, req->req.actual);
++                              req->req.actual = req->req.length;
++                              completed = 1;
++                      }
++              } else {
++                      req->req.actual = req->req.length;
++                      completed = 1;
++              }
++      } else if (dcsr & DCSR_EORINTR) {       /* Only happened in OUT DMA */
++              int remain, udccsr;
++
++              DCSR(dmach) = DCSR_EORINTR;
++              remain = DCMD(dmach) & DCMD_LENGTH;
++              req->req.actual = req->req.length - remain;
++
++              udccsr = *ep->reg_udccsr;
++              if (udccsr & UDCCSR_SP) {
++                      *ep->reg_udccsr = UDCCSR_PC | (udccsr & UDCCSR_MASK);
++                      completed = 1;
++              }
++              DMSG("%s: length:%d actual:%d\n",
++                   __FUNCTION__, req->req.length, req->req.actual);
++      } else
++              DMSG("%s: Others dma:%d DCSR:0x%x DCMD:0x%x\n",
++                   __FUNCTION__, dmach, DCSR(dmach), DCMD(dmach));
++
++      if (likely(completed)) {
++              if (req->queue.next != &ep->queue) {
++                      req_next = list_entry(req->queue.next,
++                                            struct pxa27x_request, queue);
++                      kick_dma(ep, req_next);
++              }
++              done(ep, req, 0);
++      } else {
++              kick_dma(ep, req);
++      }
++
++      local_irq_enable();
++}
++
++#endif
++/*-------------------------------------------------------------------------*/
++
++static int
++pxa27x_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
++              unsigned int gfp_flags)
++{
++      struct pxa27x_ep *ep;
++      struct pxa27x_request *req;
++      struct pxa27x_udc *dev;
++      unsigned long flags;
++
++      req = container_of(_req, struct pxa27x_request, req);
++      if (unlikely(!_req || !_req->complete || !_req->buf ||
++                   !list_empty(&req->queue))) {
++              DMSG("%s, bad params\n", __FUNCTION__);
++              return -EINVAL;
++      }
++
++      ep = container_of(_ep, struct pxa27x_ep, ep);
++      if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
++              DMSG("%s, bad ep\n", __FUNCTION__);
++              return -EINVAL;
++      }
++
++      DMSG("%s, ep point %d is queue\n", __FUNCTION__, ep->ep_num);
++
++      dev = ep->dev;
++      if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
++              DMSG("%s, bogus device state\n", __FUNCTION__);
++              return -ESHUTDOWN;
++      }
++
++      /* iso is always one packet per request, that's the only way
++       * we can report per-packet status.  that also helps with dma.
++       */
++      if (unlikely(ep->ep_type == USB_ENDPOINT_XFER_ISOC
++                   && req->req.length > le16_to_cpu
++                   (ep->desc->wMaxPacketSize)))
++              return -EMSGSIZE;
++
++#ifdef        USE_DMA
++      /* FIXME: caller may already have done the dma mapping */
++      if (ep->dma >= 0) {
++              _req->dma = dma_map_single(dev->dev, _req->buf, _req->length,
++                                         (ep->
++                                          dir_in) ? DMA_TO_DEVICE :
++                                         DMA_FROM_DEVICE);
++      }
++#endif
++
++      DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
++          _ep->name, _req, _req->length, _req->buf);
++
++      local_irq_save(flags);
++
++      _req->status = -EINPROGRESS;
++      _req->actual = 0;
++
++      /* kickstart this i/o queue? */
++      if (list_empty(&ep->queue) && !ep->stopped) {
++              if (ep->desc == 0 /* ep0 */ ) {
++                      unsigned length = _req->length;
++
++                      switch (dev->ep0state) {
++                      case EP0_IN_DATA_PHASE:
++                              dev->stats.write.ops++;
++                              if (write_ep0_fifo(ep, req))
++                                      req = 0;
++                              break;
++
++                      case EP0_OUT_DATA_PHASE:
++                              dev->stats.read.ops++;
++                              if (dev->req_pending)
++                                      ep0start(dev, UDCCSR0_IPR, "OUT");
++                              if (length == 0 || ((UDCCSR0 & UDCCSR0_RNE) != 0
++                                                  && read_ep0_fifo(ep,
++                                                                   req))) {
++                                      ep0_idle(dev);
++                                      done(ep, req, 0);
++                                      req = 0;
++                              }
++                              break;
++                      case EP0_NO_ACTION:
++                              ep0_idle(dev);
++                              req = 0;
++                              break;
++                      default:
++                              DMSG("ep0 i/o, odd state %d\n", dev->ep0state);
++                              local_irq_restore(flags);
++                              return -EL2HLT;
++                      }
++#ifdef USE_DMA
++                      /* either start dma or prime pio pump */
++              } else if (ep->dma >= 0) {
++                      kick_dma(ep, req);
++#endif
++                      /* can the FIFO can satisfy the request immediately? */
++              } else if (ep->dir_in
++                         && (*ep->reg_udccsr & UDCCSR_FS) != 0
++                         && write_fifo(ep, req)) {
++                      req = 0;
++              } else if ((*ep->reg_udccsr & UDCCSR_FS) != 0
++                         && read_fifo(ep, req)) {
++                      req = 0;
++              }
++              DMSG("req:%p,ep->desc:%p,ep->dma:%d\n", req, ep->desc, ep->dma);
++              if (likely(req && ep->desc) && ep->dma < 0)
++                      pio_irq_enable(ep->ep_num);
++      }
++
++      /* pio or dma irq handler advances the queue. */
++      if (likely(req != 0))
++              list_add_tail(&req->queue, &ep->queue);
++      local_irq_restore(flags);
++
++      return 0;
++}
++
++/*
++ *    nuke - dequeue ALL requests
++ */
++static void nuke(struct pxa27x_ep *ep, int status)
++{
++      struct pxa27x_request *req;
++
++      /* called with irqs blocked */
++#ifdef        USE_DMA
++      if (ep->dma >= 0 && !ep->stopped)
++              cancel_dma(ep);
++#endif
++      while (!list_empty(&ep->queue)) {
++              req = list_entry(ep->queue.next, struct pxa27x_request, queue);
++              done(ep, req, status);
++      }
++      if (ep->desc)
++              pio_irq_disable(ep->ep_num);
++}
++
++/* dequeue JUST ONE request */
++static int pxa27x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
++{
++      struct pxa27x_ep *ep;
++      struct pxa27x_request *req;
++      unsigned long flags;
++
++      ep = container_of(_ep, struct pxa27x_ep, ep);
++      if (!_ep || ep->ep.name == ep0name)
++              return -EINVAL;
++
++      local_irq_save(flags);
++
++      /* make sure it's actually queued on this endpoint */
++      list_for_each_entry(req, &ep->queue, queue) {
++              if (&req->req == _req)
++                      break;
++      }
++      if (&req->req != _req) {
++              local_irq_restore(flags);
++              return -EINVAL;
++      }
++#ifdef        USE_DMA
++      if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) {
++              cancel_dma(ep);
++              done(ep, req, -ECONNRESET);
++              /* restart i/o */
++              if (!list_empty(&ep->queue)) {
++                      req = list_entry(ep->queue.next,
++                                       struct pxa27x_request, queue);
++                      kick_dma(ep, req);
++              }
++      } else
++#endif
++              done(ep, req, -ECONNRESET);
++
++      local_irq_restore(flags);
++      return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static int pxa27x_ep_set_halt(struct usb_ep *_ep, int value)
++{
++      struct pxa27x_ep *ep;
++      unsigned long flags;
++
++      DMSG("%s is called\n", __FUNCTION__);
++      ep = container_of(_ep, struct pxa27x_ep, ep);
++      if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))
++          || ep->ep_type == USB_ENDPOINT_XFER_ISOC) {
++              DMSG("%s, bad ep\n", __FUNCTION__);
++              return -EINVAL;
++      }
++      if (value == 0) {
++              /* this path (reset toggle+halt) is needed to implement
++               * SET_INTERFACE on normal hardware.  but it can't be
++               * done from software on the PXA UDC, and the hardware
++               * forgets to do it as part of SET_INTERFACE automagic.
++               */
++              DMSG("only host can clear %s halt\n", _ep->name);
++              return -EROFS;
++      }
++
++      local_irq_save(flags);
++
++      if (ep->dir_in && ((*ep->reg_udccsr & UDCCSR_FS) == 0
++                         || !list_empty(&ep->queue))) {
++              local_irq_restore(flags);
++              return -EAGAIN;
++      }
++
++      /* FST bit is the same for control, bulk in, bulk out, interrupt in */
++      *ep->reg_udccsr = UDCCSR_FST | UDCCSR_FEF;
++
++      /* ep0 needs special care */
++      if (!ep->desc) {
++              start_watchdog(ep->dev);
++              ep->dev->req_pending = 0;
++              ep->dev->ep0state = EP0_STALL;
++              LED_EP0_OFF;
++
++              /* and bulk/intr endpoints like dropping stalls too */
++      } else {
++              unsigned i;
++              for (i = 0; i < 1000; i += 20) {
++                      if (*ep->reg_udccsr & UDCCSR_SST)
++                              break;
++                      udelay(20);
++              }
++      }
++      local_irq_restore(flags);
++
++      DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
++      return 0;
++}
++
++static int pxa27x_ep_fifo_status(struct usb_ep *_ep)
++{
++      struct pxa27x_ep *ep;
++
++      ep = container_of(_ep, struct pxa27x_ep, ep);
++      if (!_ep) {
++              DMSG("%s, bad ep\n", __FUNCTION__);
++              return -ENODEV;
++      }
++      /* pxa can't report unclaimed bytes from IN fifos */
++      if (ep->dir_in)
++              return -EOPNOTSUPP;
++      if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
++          || (*ep->reg_udccsr & UDCCSR_FS) == 0)
++              return 0;
++      else
++              return (*ep->reg_udcbcr & 0xfff) + 1;
++}
++
++static void pxa27x_ep_fifo_flush(struct usb_ep *_ep)
++{
++      struct pxa27x_ep *ep;
++
++      ep = container_of(_ep, struct pxa27x_ep, ep);
++      if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
++              DMSG("%s, bad ep\n", __FUNCTION__);
++              return;
++      }
++
++      /* toggle and halt bits stay unchanged */
++
++      /* for OUT, just read and discard the FIFO contents. */
++      if (!ep->dir_in) {
++              while (((*ep->reg_udccsr) & UDCCSR_BNE) != 0)
++                      (void)*ep->reg_udcdr;
++              return;
++      }
++
++      /* most IN status is the same, but ISO can't stall */
++      *ep->reg_udccsr = UDCCSR_PC | UDCCSR_FST | UDCCSR_TRN
++          | (ep->ep_type == USB_ENDPOINT_XFER_ISOC)
++          ? 0 : UDCCSR_SST;
++}
++
++static struct usb_ep_ops pxa27x_ep_ops = {
++      .enable = pxa27x_ep_enable,
++      .disable = pxa27x_ep_disable,
++
++      .alloc_request = pxa27x_ep_alloc_request,
++      .free_request = pxa27x_ep_free_request,
++
++#warning "CHECK comments here"
++  /*
++      .alloc_buffer = pxa27x_ep_alloc_buffer,
++      .free_buffer = pxa27x_ep_free_buffer,
++  */
++
++      .queue = pxa27x_ep_queue,
++      .dequeue = pxa27x_ep_dequeue,
++
++      .set_halt = pxa27x_ep_set_halt,
++      .fifo_status = pxa27x_ep_fifo_status,
++      .fifo_flush = pxa27x_ep_fifo_flush,
++};
++
++/* ---------------------------------------------------------------------------
++ *    device-scoped parts of the api to the usb controller hardware
++ * ---------------------------------------------------------------------------
++ */
++
++static inline void validate_fifo_size(struct pxa27x_ep *pxa_ep, u8 bmAttributes)
++{
++      switch (bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
++      case USB_ENDPOINT_XFER_CONTROL:
++              pxa_ep->fifo_size = EP0_FIFO_SIZE;
++              break;
++      case USB_ENDPOINT_XFER_ISOC:
++              pxa_ep->fifo_size = ISO_FIFO_SIZE;
++              break;
++      case USB_ENDPOINT_XFER_BULK:
++              pxa_ep->fifo_size = BULK_FIFO_SIZE;
++              break;
++      case USB_ENDPOINT_XFER_INT:
++              pxa_ep->fifo_size = INT_FIFO_SIZE;
++              break;
++      default:
++              break;
++      }
++}
++
++#define NAME_SIZE 18
++struct usb_ep *pxa27x_ep_alloc(struct usb_gadget *gadget,
++                             struct usb_endpoint_descriptor *desc, int config,
++                             int interface, int alt)
++{
++      u32 tmp;
++      unsigned i;
++      char *name;
++      struct usb_ep *ep = NULL;
++      struct pxa27x_ep *pxa_ep = NULL;
++      struct pxa27x_udc *dev = the_controller;
++
++      DMSG("pxa27x_config_ep is called\n");
++      DMSG(" usb endpoint descriptor is:\n"
++           "  bLength:%d\n"
++           "  bDescriptorType:%x\n"
++           "  bEndpointAddress:%x\n"
++           "  bmAttributes:%x\n"
++           "  wMaxPacketSize:%d\n",
++           desc->bLength,
++           desc->bDescriptorType, desc->bEndpointAddress,
++           desc->bmAttributes, desc->wMaxPacketSize);
++
++      for (i = 1; i < UDC_EP_NUM; i++) {
++              if (!dev->ep[i].assigned) {
++                      pxa_ep = &dev->ep[i];
++                      pxa_ep->assigned = 1;
++                      pxa_ep->ep_num = i;
++                      break;
++              }
++      }
++      if (unlikely(i == UDC_EP_NUM)) {
++              printk(KERN_ERR __FILE__ ": Failed to find a spare endpoint\n");
++              return ep;
++      }
++
++      ep = &pxa_ep->ep;
++
++      pxa_ep->dev = dev;
++      pxa_ep->desc = desc;
++      pxa_ep->pio_irqs = pxa_ep->dma_irqs = 0;
++      pxa_ep->dma = -1;
++
++      if (!(desc->bEndpointAddress & 0xF))
++              desc->bEndpointAddress |= i;
++
++      if (!(desc->wMaxPacketSize)) {
++              validate_fifo_size(pxa_ep, desc->bmAttributes);
++              desc->wMaxPacketSize = pxa_ep->fifo_size;
++      } else
++              pxa_ep->fifo_size = desc->wMaxPacketSize;
++
++      pxa_ep->dir_in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0;
++      pxa_ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
++      pxa_ep->stopped = 1;
++      pxa_ep->dma_con = 0;
++      pxa_ep->config = config;
++      pxa_ep->interface = interface;
++      pxa_ep->aisn = alt;
++
++      pxa_ep->reg_udccsr = &UDCCSR0 + i;
++      pxa_ep->reg_udcbcr = &UDCBCR0 + i;
++      pxa_ep->reg_udcdr = &UDCDR0 + i;
++      pxa_ep->reg_udccr = &UDCCRA - 1 + i;
++#ifdef USE_DMA
++      pxa_ep->reg_drcmr = &DRCMR24 + i;
++#endif
++
++      DMSG("udccsr=0x%8x, udcbcr=0x%8x, udcdr=0x%8x,"
++           "udccr0=0x%8x\n",
++           (unsigned)pxa_ep->reg_udccsr,
++           (unsigned)pxa_ep->reg_udcbcr,
++           (unsigned)pxa_ep->reg_udcdr, (unsigned)pxa_ep->reg_udccr);
++
++      /* Configure UDCCR */
++      tmp = 0;
++      tmp |= (pxa_ep->config << UDCCONR_CN_S) & UDCCONR_CN;
++#if 0
++      tmp |= (pxa_ep->interface << UDCCONR_IN_S) & UDCCONR_IN;
++      tmp |= (pxa_ep->aisn << UDCCONR_AISN_S) & UDCCONR_AISN;
++#else
++      tmp |= (0 << UDCCONR_IN_S) & UDCCONR_IN;
++      tmp |= (0 << UDCCONR_AISN_S) & UDCCONR_AISN;
++#endif
++      tmp |= (desc->bEndpointAddress << UDCCONR_EN_S) & UDCCONR_EN;
++      tmp |= (pxa_ep->ep_type << UDCCONR_ET_S) & UDCCONR_ET;
++      tmp |= (pxa_ep->dir_in) ? UDCCONR_ED : 0;
++      tmp |= (min(pxa_ep->fifo_size, (unsigned)desc->wMaxPacketSize)
++              << UDCCONR_MPS_S) & UDCCONR_MPS;
++      tmp |= UDCCONR_DE | UDCCONR_EE;
++#if 0
++      tmp |= UDCCONR_EE;
++#endif
++
++      *pxa_ep->reg_udccr = tmp;
++
++#ifdef USE_DMA
++      /* Only BULK use DMA */
++      if ((pxa_ep->ep_type & USB_ENDPOINT_XFERTYPE_MASK)
++          == USB_ENDPOINT_XFER_BULK)
++              *pxa_ep->reg_udccsr = UDCCSR_DME;
++#endif
++
++      DMSG("UDCCR: 0x%p is 0x%x\n", pxa_ep->reg_udccr, *pxa_ep->reg_udccr);
++
++      /* Fill ep name */
++      name = kmalloc(NAME_SIZE, GFP_KERNEL);
++      if (!name) {
++              printk(KERN_ERR "%s: Error\n", __FUNCTION__);
++              return NULL;
++      }
++
++      switch (pxa_ep->ep_type) {
++      case USB_ENDPOINT_XFER_BULK:
++              sprintf(name, "Bulk-%s-%d", (pxa_ep->dir_in ? "in" : "out"), i);
++              break;
++      case USB_ENDPOINT_XFER_INT:
++              sprintf(name, "Interrupt-%s-%d", (pxa_ep->dir_in ?
++                                                "in" : "out"), i);
++              break;
++      default:
++              sprintf(name, "endpoint-%s-%d", (pxa_ep->dir_in ?
++                                               "in" : "out"), i);
++              break;
++      }
++      ep->name = name;
++
++      ep->ops = &pxa27x_ep_ops;
++      ep->maxpacket = min((ushort) pxa_ep->fifo_size, desc->wMaxPacketSize);
++
++      list_add_tail(&ep->ep_list, &gadget->ep_list);
++      return ep;
++}
++
++static int pxa27x_udc_get_frame(struct usb_gadget *_gadget)
++{
++      return (UDCFNR & 0x3FF);
++}
++
++static int pxa27x_udc_wakeup(struct usb_gadget *_gadget)
++{
++      /* host may not have enabled remote wakeup */
++      if ((UDCCR & UDCCR_DWRE) == 0)
++              return -EHOSTUNREACH;
++      udc_set_mask_UDCCR(UDCCR_UDR);
++      return 0;
++}
++
++static const struct usb_gadget_ops pxa27x_udc_ops = {
++      .ep_alloc = pxa27x_ep_alloc,
++      .get_frame = pxa27x_udc_get_frame,
++      .wakeup = pxa27x_udc_wakeup,
++      /* current versions must always be self-powered */
++};
++
++/*-------------------------------------------------------------------------*/
++
++#ifdef UDC_PROC_FILE
++
++static const char proc_node_name[] = "driver/udc";
++
++static int
++udc_proc_read(char *page, char **start, off_t off, int count,
++            int *eof, void *_dev)
++{
++      char *buf = page;
++      struct pxa27x_udc *dev = _dev;
++      char *next = buf;
++      unsigned size = count;
++      unsigned long flags;
++      int i, t;
++      u32 tmp;
++
++      if (off != 0)
++              return 0;
++
++      local_irq_save(flags);
++
++      /* basic device status */
++      t = scnprintf(next, size, DRIVER_DESC "\n"
++                    "%s version: %s\nGadget driver: %s\n",
++                    driver_name, DRIVER_VERSION SIZE_STR DMASTR,
++                    dev->driver ? dev->driver->driver.name : "(none)");
++      size -= t;
++      next += t;
++
++      /* registers for device and ep0 */
++      t = scnprintf(next, size,
++                    "uicr %02X.%02X, usir %02X.%02x, ufnr %02X\n",
++                    UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR);
++      size -= t;
++      next += t;
++
++      tmp = UDCCR;
++      t = scnprintf(next, size,
++                    "udccr %02X =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n",
++                    tmp, (tmp & UDCCR_OEN) ? " oen" : "",
++                    (tmp & UDCCR_AALTHNP) ? " aalthnp" : "",
++                    (tmp & UDCCR_AHNP) ? " rem" : "",
++                    (tmp & UDCCR_BHNP) ? " rstir" : "",
++                    (tmp & UDCCR_DWRE) ? " dwre" : "",
++                    (tmp & UDCCR_SMAC) ? " smac" : "",
++                    (tmp & UDCCR_EMCE) ? " emce" : "",
++                    (tmp & UDCCR_UDR) ? " udr" : "",
++                    (tmp & UDCCR_UDA) ? " uda" : "",
++                    (tmp & UDCCR_UDE) ? " ude" : "",
++                    (tmp & UDCCR_ACN) >> UDCCR_ACN_S,
++                    (tmp & UDCCR_AIN) >> UDCCR_AIN_S,
++                    (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S);
++
++      size -= t;
++      next += t;
++
++      tmp = UDCCSR0;
++      t = scnprintf(next, size,
++                    "udccsr0 %02X =%s%s%s%s%s%s%s\n", tmp,
++                    (tmp & UDCCSR0_SA) ? " sa" : "",
++                    (tmp & UDCCSR0_RNE) ? " rne" : "",
++                    (tmp & UDCCSR0_FST) ? " fst" : "",
++                    (tmp & UDCCSR0_SST) ? " sst" : "",
++                    (tmp & UDCCSR0_DME) ? " dme" : "",
++                    (tmp & UDCCSR0_IPR) ? " ipr" : "",
++                    (tmp & UDCCSR0_OPC) ? " opc" : "");
++      size -= t;
++      next += t;
++
++      if (!dev->driver)
++              goto done;
++
++      t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
++                    dev->stats.write.bytes, dev->stats.write.ops,
++                    dev->stats.read.bytes, dev->stats.read.ops,
++                    dev->stats.irqs);
++      size -= t;
++      next += t;
++
++      /* dump endpoint queues */
++      for (i = 0; i < UDC_EP_NUM; i++) {
++              struct pxa27x_ep *ep = &dev->ep[i];
++              struct pxa27x_request *req;
++              int t;
++
++              if (i != 0) {
++                      const struct usb_endpoint_descriptor *d;
++
++                      d = ep->desc;
++                      if (!d)
++                              continue;
++                      tmp = *dev->ep[i].reg_udccsr;
++                      t = scnprintf(next, size,
++                                    "%s max %d %s udccs %02x udccr:0x%x\n",
++                                    ep->ep.name,
++                                    le16_to_cpu(d->wMaxPacketSize),
++                                    (ep->dma >= 0) ? "dma" : "pio", tmp,
++                                    *dev->ep[i].reg_udccr);
++                      /* TODO translate all five groups of udccs bits! */
++
++              } else          /* ep0 should only have one transfer queued */
++                      t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n",
++                                    ep->pio_irqs);
++              if (t <= 0 || t > size)
++                      goto done;
++              size -= t;
++              next += t;
++
++              if (list_empty(&ep->queue)) {
++                      t = scnprintf(next, size, "\t(nothing queued)\n");
++                      if (t <= 0 || t > size)
++                              goto done;
++                      size -= t;
++                      next += t;
++                      continue;
++              }
++              list_for_each_entry(req, &ep->queue, queue) {
++#ifdef        USE_DMA
++                      if (ep->dma >= 0 && req->queue.prev == &ep->queue)
++                              t = scnprintf(next, size,
++                                            "\treq %p len %d/%d "
++                                            "buf %p (dma%d dcmd %08x)\n",
++                                            &req->req, req->req.actual,
++                                            req->req.length, req->req.buf,
++                                            ep->dma, DCMD(ep->dma)
++                                            /* low 13 bits == bytes-to-go */
++                                  );
++                      else
++#endif
++                              t = scnprintf(next, size,
++                                            "\treq %p len %d/%d buf %p\n",
++                                            &req->req, req->req.actual,
++                                            req->req.length, req->req.buf);
++                      if (t <= 0 || t > size)
++                              goto done;
++                      size -= t;
++                      next += t;
++              }
++      }
++
++      done:
++      local_irq_restore(flags);
++      *eof = 1;
++      return count - size;
++}
++
++#define create_proc_files() \
++      create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
++#define remove_proc_files() \
++      remove_proc_entry(proc_node_name, NULL)
++
++#else                         /* !UDC_PROC_FILE */
++#define create_proc_files() do {} while (0)
++#define remove_proc_files() do {} while (0)
++
++#endif                                /* UDC_PROC_FILE */
++
++/* "function" sysfs attribute */
++static ssize_t
++show_function(struct device *_dev, struct device_attribute *attr, char *buf)
++{
++      struct pxa27x_udc *dev = dev_get_drvdata(_dev);
++
++      if (!dev->driver
++          || !dev->driver->function
++          || strlen(dev->driver->function) > PAGE_SIZE)
++              return 0;
++      return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
++}
++
++static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ *    udc_disable - disable USB device controller
++ */
++static void udc_disable(struct pxa27x_udc *dev)
++{
++      UDCICR0 = 0x00000000;
++      UDCICR1 = 0x00000000;
++
++      udc_clear_mask_UDCCR(UDCCR_UDE);
++
++      /* Disable clock for USB device */
++      pxa_set_cken(CKEN_USB, 0);
++
++      ep0_idle(dev);
++      dev->gadget.speed = USB_SPEED_UNKNOWN;
++
++      pullup_off();
++}
++
++/*
++ *    udc_reinit - initialize software state
++ */
++static void udc_reinit(struct pxa27x_udc *dev)
++{
++      u32 i;
++
++      dev->ep0state = EP0_IDLE;
++
++      /* basic endpoint records init */
++      for (i = 0; i < UDC_EP_NUM; i++) {
++              struct pxa27x_ep *ep = &dev->ep[i];
++
++              ep->stopped = 0;
++              ep->pio_irqs = ep->dma_irqs = 0;
++      }
++      dev->configuration = 0;
++      dev->interface = 0;
++      dev->alternate = 0;
++      /* the rest was statically initialized, and is read-only */
++}
++
++/* until it's enabled, this UDC should be completely invisible
++ * to any USB host.
++ */
++static void udc_enable(struct pxa27x_udc *dev)
++{
++      udc_clear_mask_UDCCR(UDCCR_UDE);
++
++      /* Enable clock for USB device */
++      pxa_set_cken(CKEN_USB, 1);
++
++      UDCICR0 = UDCICR1 = 0;
++
++      ep0_idle(dev);
++      dev->gadget.speed = USB_SPEED_FULL;
++      dev->stats.irqs = 0;
++
++      udc_set_mask_UDCCR(UDCCR_UDE);
++      udelay(2);
++      if (UDCCR & UDCCR_EMCE) {
++              printk(KERN_ERR
++                     ": There are error in configuration, udc disabled\n");
++      }
++
++      /* caller must be able to sleep in order to cope
++       * with startup transients.
++       */
++      msleep(100);
++
++      /* enable suspend/resume and reset irqs */
++      UDCICR1 = UDCICR1_IECC | UDCICR1_IERU | UDCICR1_IESU | UDCICR1_IERS;
++
++      /* enable ep0 irqs */
++      UDCICR0 = UDCICR_INT(0, UDCICR_INT_MASK);
++#if 0
++      for (i = 1; i < UDC_EP_NUM; i++) {
++              if (dev->ep[i].assigned)
++                      pio_irq_enable(i);
++      }
++#endif
++
++      pullup_on();
++}
++
++/* when a driver is successfully registered, it will receive
++ * control requests including set_configuration(), which enables
++ * non-control requests.  then usb traffic follows until a
++ * disconnect is reported.  then a host may connect again, or
++ * the driver might get unbound.
++ */
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++{
++      struct pxa27x_udc *dev = the_controller;
++      int retval;
++
++      DMSG("dev=0x%x, driver=0x%x, speed=%d, "
++           "bind=0x%x, unbind=0x%x, disconnect=0x%x, setup=0x%x\n",
++           (unsigned)dev, (unsigned)driver, driver->speed,
++           (unsigned)driver->bind, (unsigned)driver->unbind,
++           (unsigned)driver->disconnect, (unsigned)driver->setup);
++
++      if (!driver || driver->speed != USB_SPEED_FULL
++          || !driver->bind
++          || !driver->unbind || !driver->disconnect || !driver->setup)
++              return -EINVAL;
++      if (!dev)
++              return -ENODEV;
++      if (dev->driver)
++              return -EBUSY;
++
++      /* first hook up the driver ... */
++      dev->driver = driver;
++      dev->gadget.dev.driver = &driver->driver;
++
++      retval = device_add(&dev->gadget.dev);
++      if (retval) {
++              DMSG("unable to add device for %s --> error %d\n",
++                   driver->driver.name, retval);
++              goto device_add_error;
++      }
++      retval = driver->bind(&dev->gadget);
++      if (retval) {
++              DMSG("bind to driver %s --> error %d\n",
++                   driver->driver.name, retval);
++              goto device_bind_error;
++      }
++      retval = device_create_file(dev->dev, &dev_attr_function);
++      if (retval) {
++              DMSG("unable to create file for %s --> error %d\n",
++                   driver->driver.name, retval);
++              goto create_file_error;
++      }
++
++      /* ... then enable host detection and ep0; and we're ready
++       * for set_configuration as well as eventual disconnect.
++       * NOTE:  this shouldn't power up until later.
++       */
++      DMSG("registered gadget driver '%s'\n", driver->driver.name);
++      udc_enable(dev);
++      dump_state(dev);
++
++      return 0;
++
++      create_file_error:
++      driver->unbind(&dev->gadget);
++
++      device_bind_error:
++      device_del(&dev->gadget.dev);
++
++      device_add_error:
++      dev->driver = 0;
++      dev->gadget.dev.driver = 0;
++
++      return retval;
++}
++
++EXPORT_SYMBOL(usb_gadget_register_driver);
++
++static void
++stop_activity(struct pxa27x_udc *dev, struct usb_gadget_driver *driver)
++{
++      int i;
++
++      DMSG("Trace path 1\n");
++      /* don't disconnect drivers more than once */
++      if (dev->gadget.speed == USB_SPEED_UNKNOWN)
++              driver = 0;
++      dev->gadget.speed = USB_SPEED_UNKNOWN;
++
++      /* prevent new request submissions, kill any outstanding requests  */
++      for (i = 0; i < UDC_EP_NUM; i++) {
++              struct pxa27x_ep *ep = &dev->ep[i];
++
++              ep->stopped = 1;
++              nuke(ep, -ESHUTDOWN);
++      }
++      del_timer_sync(&dev->timer);
++
++      /* report disconnect; the driver is already quiesced */
++      if (driver)
++              driver->disconnect(&dev->gadget);
++
++      /* re-init driver-visible data structures */
++      udc_reinit(dev);
++}
++
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++      struct pxa27x_udc *dev = the_controller;
++
++      if (!dev)
++              return -ENODEV;
++      if (!driver || driver != dev->driver)
++              return -EINVAL;
++
++      local_irq_disable();
++      udc_disable(dev);
++      stop_activity(dev, driver);
++      local_irq_enable();
++
++      driver->unbind(&dev->gadget);
++      dev->driver = 0;
++
++      device_del(&dev->gadget.dev);
++      device_remove_file(dev->dev, &dev_attr_function);
++
++      DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
++      dump_state(dev);
++      return 0;
++}
++
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++#ifndef       enable_disconnect_irq
++#define       enable_disconnect_irq()         do {} while (0)
++#define       disable_disconnect_irq()        do {} while (0)
++#endif
++
++/*-------------------------------------------------------------------------*/
++
++static inline void clear_ep_state(struct pxa27x_udc *dev)
++{
++      unsigned i;
++
++      /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
++       * fifos, and pending transactions mustn't be continued in any case.
++       */
++      for (i = 1; i < UDC_EP_NUM; i++)
++              nuke(&dev->ep[i], -ECONNABORTED);
++}
++
++static void udc_watchdog(unsigned long _dev)
++{
++      struct pxa27x_udc *dev = (void *)_dev;
++
++      local_irq_disable();
++      if (dev->ep0state == EP0_STALL
++          && (UDCCSR0 & UDCCSR0_FST) == 0 && (UDCCSR0 & UDCCSR0_SST) == 0) {
++              UDCCSR0 = UDCCSR0_FST | UDCCSR0_FTF;
++              DBG(DBG_VERBOSE, "ep0 re-stall\n");
++              start_watchdog(dev);
++      }
++      local_irq_enable();
++}
++
++static void handle_ep0(struct pxa27x_udc *dev)
++{
++      u32 udccsr0 = UDCCSR0;
++      struct pxa27x_ep *ep = &dev->ep[0];
++      struct pxa27x_request *req;
++      union {
++              struct usb_ctrlrequest r;
++              u8 raw[8];
++              u32 word[2];
++      } u;
++
++      if (list_empty(&ep->queue))
++              req = 0;
++      else
++              req = list_entry(ep->queue.next, struct pxa27x_request, queue);
++
++      /* clear stall status */
++      if (udccsr0 & UDCCSR0_SST) {
++              nuke(ep, -EPIPE);
++              UDCCSR0 = UDCCSR0_SST;
++              del_timer(&dev->timer);
++              ep0_idle(dev);
++      }
++
++      /* previous request unfinished?  non-error iff back-to-back ... */
++      if ((udccsr0 & UDCCSR0_SA) != 0 && dev->ep0state != EP0_IDLE) {
++              nuke(ep, 0);
++              del_timer(&dev->timer);
++              ep0_idle(dev);
++      }
++
++      switch (dev->ep0state) {
++      case EP0_NO_ACTION:
++              printk(KERN_INFO "%s: Busy\n", __FUNCTION__);
++              /*Fall through */
++      case EP0_IDLE:
++              /* late-breaking status? */
++              udccsr0 = UDCCSR0;
++
++              /* start control request? */
++              if (likely((udccsr0 & (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE))
++                         == (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE))) {
++                      int i;
++
++                      nuke(ep, -EPROTO);
++                      /* read SETUP packet */
++                      for (i = 0; i < 2; i++) {
++                              if (unlikely(!(UDCCSR0 & UDCCSR0_RNE))) {
++                                    bad_setup:
++                                      DMSG("SETUP %d!\n", i);
++                                      goto stall;
++                              }
++                              u.word[i] = UDCDR0;
++                      }
++                      if (unlikely((UDCCSR0 & UDCCSR0_RNE) != 0))
++                              goto bad_setup;
++
++                      le16_to_cpus(&u.r.wValue);
++                      le16_to_cpus(&u.r.wIndex);
++                      le16_to_cpus(&u.r.wLength);
++
++                      LED_EP0_ON;
++
++                      DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n",
++                          u.r.bRequestType, u.r.bRequest,
++                          u.r.wValue, u.r.wIndex, u.r.wLength);
++                      /* cope with automagic for some standard requests. */
++                      dev->req_std = (u.r.bRequestType & USB_TYPE_MASK)
++                          == USB_TYPE_STANDARD;
++                      dev->req_config = 0;
++                      dev->req_pending = 1;
++#if 0
++                      switch (u.r.bRequest) {
++                              /* hardware was supposed to hide this */
++                      case USB_REQ_SET_CONFIGURATION:
++                      case USB_REQ_SET_INTERFACE:
++                      case USB_REQ_SET_ADDRESS:
++                              printk(KERN_ERR "Should not come here\n");
++                              break;
++                      }
++
++#endif
++                      if (u.r.bRequestType & USB_DIR_IN)
++                              dev->ep0state = EP0_IN_DATA_PHASE;
++                      else
++                              dev->ep0state = EP0_OUT_DATA_PHASE;
++                      i = dev->driver->setup(&dev->gadget, &u.r);
++
++                      if (i < 0) {
++                              /* hardware automagic preventing STALL... */
++                              if (dev->req_config) {
++                                      /* hardware sometimes neglects to tell
++                                       * tell us about config change events,
++                                       * so later ones may fail...
++                                       */
++                                      WARN("config change %02x fail %d?\n",
++                                           u.r.bRequest, i);
++                                      return;
++                                      /* TODO experiment:  if has_cfr,
++                                       * hardware didn't ACK; maybe we
++                                       * could actually STALL!
++                                       */
++                              }
++                              DBG(DBG_VERBOSE, "protocol STALL, "
++                                  "%02x err %d\n", UDCCSR0, i);
++                            stall:
++                              /* the watchdog timer helps deal with cases
++                               * where udc seems to clear FST wrongly, and
++                               * then NAKs instead of STALLing.
++                               */
++                              ep0start(dev, UDCCSR0_FST | UDCCSR0_FTF,
++                                       "stall");
++                              start_watchdog(dev);
++                              dev->ep0state = EP0_STALL;
++                              LED_EP0_OFF;
++
++                              /* deferred i/o == no response yet */
++                      } else if (dev->req_pending) {
++                              if (likely(dev->ep0state == EP0_IN_DATA_PHASE
++                                         || dev->req_std || u.r.wLength))
++                                      ep0start(dev, 0, "defer");
++                              else
++                                      ep0start(dev, UDCCSR0_IPR, "defer/IPR");
++                      }
++
++                      /* expect at least one data or status stage irq */
++                      return;
++
++              } else {
++                      /* some random early IRQ:
++                       * - we acked FST
++                       * - IPR cleared
++                       * - OPC got set, without SA (likely status stage)
++                       */
++                      UDCCSR0 = udccsr0 & (UDCCSR0_SA | UDCCSR0_OPC);
++              }
++              break;
++      case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */
++              if (udccsr0 & UDCCSR0_OPC) {
++                      UDCCSR0 = UDCCSR0_OPC | UDCCSR0_FTF;
++                      DBG(DBG_VERBOSE, "ep0in premature status\n");
++                      if (req)
++                              done(ep, req, 0);
++                      ep0_idle(dev);
++              } else {        /* irq was IPR clearing */
++
++                      if (req) {
++                              /* this IN packet might finish the request */
++                              (void)write_ep0_fifo(ep, req);
++                      }       /* else IN token before response was written */
++              }
++              break;
++      case EP0_OUT_DATA_PHASE:        /* SET_DESCRIPTOR etc */
++              if (udccsr0 & UDCCSR0_OPC) {
++                      if (req) {
++                              /* this OUT packet might finish the request */
++                              if (read_ep0_fifo(ep, req))
++                                      done(ep, req, 0);
++                              /* else more OUT packets expected */
++                      }       /* else OUT token before read was issued */
++              } else {        /* irq was IPR clearing */
++
++                      DBG(DBG_VERBOSE, "ep0out premature status\n");
++                      if (req)
++                              done(ep, req, 0);
++                      ep0_idle(dev);
++              }
++              break;
++      case EP0_STALL:
++              UDCCSR0 = UDCCSR0_FST;
++              break;
++      }
++      UDCISR0 = UDCISR_INT(0, UDCISR_INT_MASK);
++}
++
++static void handle_ep(struct pxa27x_ep *ep)
++{
++      struct pxa27x_request *req;
++      int completed;
++      u32 udccsr = 0;
++
++      DMSG("%s is called\n", __FUNCTION__);
++      do {
++              completed = 0;
++              if (likely(!list_empty(&ep->queue))) {
++                      req = list_entry(ep->queue.next,
++                                       struct pxa27x_request, queue);
++              } else
++                      req = 0;
++
++#if 0
++              udccsr = *ep->reg_udccsr;
++#endif
++              DMSG("%s: req:%p, udcisr0:0x%x udccsr %p:0x%x\n", __FUNCTION__,
++                   req, UDCISR0, ep->reg_udccsr, *ep->reg_udccsr);
++              if (unlikely(ep->dir_in)) {
++                      udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr;
++                      if (unlikely(udccsr))
++                              *ep->reg_udccsr = udccsr;
++
++                      if (req && likely((*ep->reg_udccsr & UDCCSR_FS) != 0))
++                              completed = write_fifo(ep, req);
++
++              } else {
++                      udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr;
++                      if (unlikely(udccsr))
++                              *ep->reg_udccsr = udccsr;
++
++                      /* fifos can hold packets, ready for reading... */
++                      if (likely(req)) {
++                              completed = read_fifo(ep, req);
++                      } else {
++                              pio_irq_disable(ep->ep_num);
++                              *ep->reg_udccsr = UDCCSR_FEF;
++                              DMSG("%s: no req for out data\n", __FUNCTION__);
++                      }
++              }
++              ep->pio_irqs++;
++      } while (completed);
++}
++
++static void pxa27x_change_configuration(struct pxa27x_udc *dev)
++{
++      struct usb_ctrlrequest req;
++
++      req.bRequestType = 0;
++      req.bRequest = USB_REQ_SET_CONFIGURATION;
++      req.wValue = dev->configuration;
++      req.wIndex = 0;
++      req.wLength = 0;
++
++      dev->ep0state = EP0_NO_ACTION;
++      dev->driver->setup(&dev->gadget, &req);
++
++}
++
++static void pxa27x_change_interface(struct pxa27x_udc *dev)
++{
++      struct usb_ctrlrequest req;
++
++      req.bRequestType = USB_RECIP_INTERFACE;
++      req.bRequest = USB_REQ_SET_INTERFACE;
++      req.wValue = dev->alternate;
++      req.wIndex = dev->interface;
++      req.wLength = 0;
++
++      dev->ep0state = EP0_NO_ACTION;
++      dev->driver->setup(&dev->gadget, &req);
++}
++
++/*
++ *    pxa27x_udc_irq - interrupt handler
++ *
++ * avoid delays in ep0 processing. the control handshaking isn't always
++ * under software control (pxa250c0 and the pxa255 are better), and delays
++ * could cause usb protocol errors.
++ */
++static irqreturn_t pxa27x_udc_irq(int irq, void *_dev)
++{
++      struct pxa27x_udc *dev = _dev;
++      int handled;
++
++      dev->stats.irqs++;
++      HEX_DISPLAY(dev->stats.irqs);
++
++      DBG(DBG_VERBOSE, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, "
++          "UDCCR:0x%08x\n", UDCISR0, UDCISR1, UDCCR);
++
++      do {
++              u32 udcir = UDCISR1 & 0xF8000000;
++
++              handled = 0;
++
++              /* SUSpend Interrupt Request */
++              if (unlikely(udcir & UDCISR1_IRSU)) {
++                      UDCISR1 = UDCISR1_IRSU;
++                      handled = 1;
++                      DBG(DBG_VERBOSE, "USB suspend\n");
++                      if (dev->gadget.speed != USB_SPEED_UNKNOWN
++                          && dev->driver && dev->driver->suspend)
++                              dev->driver->suspend(&dev->gadget);
++                      ep0_idle(dev);
++              }
++
++              /* RESume Interrupt Request */
++              if (unlikely(udcir & UDCISR1_IRRU)) {
++                      UDCISR1 = UDCISR1_IRRU;
++                      handled = 1;
++                      DBG(DBG_VERBOSE, "USB resume\n");
++
++                      if (dev->gadget.speed != USB_SPEED_UNKNOWN
++                          && dev->driver && dev->driver->resume)
++                              dev->driver->resume(&dev->gadget);
++              }
++
++              if (unlikely(udcir & UDCISR1_IRCC)) {
++                      unsigned config, interface, alternate;
++
++                      handled = 1;
++                      DBG(DBG_VERBOSE, "USB SET_CONFIGURATION or "
++                          "SET_INTERFACE command received\n");
++
++                      UDCCR |= UDCCR_SMAC;
++
++                      config = (UDCCR & UDCCR_ACN) >> UDCCR_ACN_S;
++
++                      if (dev->configuration != config) {
++                              dev->configuration = config;
++                              pxa27x_change_configuration(dev);
++                      }
++
++                      interface = (UDCCR & UDCCR_AIN) >> UDCCR_AIN_S;
++                      alternate = (UDCCR & UDCCR_AAISN) >> UDCCR_AAISN_S;
++
++                      if ((dev->configuration != interface) ||
++                          (dev->alternate != alternate)) {
++                              dev->interface = config;
++                              dev->alternate = alternate;
++                              pxa27x_change_interface(dev);
++                      }
++
++                      UDCISR1 = UDCISR1_IRCC;
++                      DMSG("%s: con:%d,inter:%d,alt:%d\n",
++                           __FUNCTION__, config, interface, alternate);
++              }
++
++              /* ReSeT Interrupt Request - USB reset */
++              if (unlikely(udcir & UDCISR1_IRRS)) {
++                      UDCISR1 = UDCISR1_IRRS;
++                      handled = 1;
++
++                      if ((UDCCR & UDCCR_UDA) == 0) {
++                              DBG(DBG_VERBOSE, "SB reset start\n");
++
++                              /* reset driver and endpoints,
++                               * in case that's not yet done
++                               */
++                              stop_activity(dev, dev->driver);
++
++                      }
++                      INFO("USB reset\n");
++                      dev->gadget.speed = USB_SPEED_FULL;
++                      memset(&dev->stats, 0, sizeof dev->stats);
++
++              } else {
++                      u32 udcisr0 = UDCISR0;
++                      u32 udcisr1 = UDCISR1 & 0xFFFF;
++                      int i;
++
++                      if (unlikely(!udcisr0 && !udcisr1))
++                              continue;
++
++                      DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", udcisr1,
++                          udcisr0);
++
++                      /* control traffic */
++                      if (udcisr0 & UDCISR0_IR0) {
++                              dev->ep[0].pio_irqs++;
++                              handle_ep0(dev);
++                              handled = 1;
++                      }
++
++                      udcisr0 >>= 2;
++                      /* endpoint data transfers */
++                      for (i = 1; udcisr0 != 0 && i < 16; udcisr0 >>= 2, i++) {
++                              UDCISR0 = UDCISR_INT(i, UDCISR_INT_MASK);
++
++                              if (udcisr0 & UDC_INT_FIFOERROR)
++                                      printk(KERN_ERR
++                                             " Endpoint %d Fifo error\n", i);
++                              if (udcisr0 & UDC_INT_PACKETCMP) {
++                                      handle_ep(&dev->ep[i]);
++                                      handled = 1;
++                              }
++
++                      }
++
++                      for (i = 0; udcisr1 != 0 && i < 8; udcisr1 >>= 2, i++) {
++                              UDCISR1 = UDCISR_INT(i, UDCISR_INT_MASK);
++
++                              if (udcisr1 & UDC_INT_FIFOERROR) {
++                                      printk(KERN_ERR
++                                             " Endpoint %d fifo error\n",
++                                             (i + 16));
++                              }
++
++                              if (udcisr1 & UDC_INT_PACKETCMP) {
++                                      handle_ep(&dev->ep[i + 16]);
++                                      handled = 1;
++                              }
++                      }
++              }
++
++              /* we could also ask for 1 msec SOF (SIR) interrupts */
++
++      } while (handled);
++      return IRQ_HANDLED;
++}
++
++static void udc_init_ep(struct pxa27x_udc *dev)
++{
++      int i;
++
++      INIT_LIST_HEAD(&dev->gadget.ep_list);
++      INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
++
++      for (i = 0; i < UDC_EP_NUM; i++) {
++              struct pxa27x_ep *ep = &dev->ep[i];
++
++              ep->dma = -1;
++              if (i != 0) {
++                      memset(ep, 0, sizeof(*ep));
++              }
++              INIT_LIST_HEAD(&ep->queue);
++      }
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void nop_release(struct device *dev)
++{
++      DMSG("%s %s\n", __FUNCTION__, dev->bus_id);
++}
++
++/* this uses load-time allocation and initialization (instead of
++ * doing it at run-time) to save code, eliminate fault paths, and
++ * be more obviously correct.
++ */
++static struct pxa27x_udc memory = {
++      .gadget = {
++                 .ops = &pxa27x_udc_ops,
++                 .ep0 = &memory.ep[0].ep,
++                 .name = driver_name,
++                 .dev = {
++                         .bus_id = "gadget",
++                         .release = nop_release,
++                         },
++                 },
++
++      /* control endpoint */
++      .ep[0] = {
++                .ep = {
++                       .name = ep0name,
++                       .ops = &pxa27x_ep_ops,
++                       .maxpacket = EP0_FIFO_SIZE,
++                       },
++                .dev = &memory,
++                .reg_udccsr = &UDCCSR0,
++                .reg_udcdr = &UDCDR0,
++                }
++};
++
++#define CP15R0_VENDOR_MASK    0xffffe000
++
++#define CP15R0_XSCALE_VALUE   0x69054000      /* intel/arm/xscale */
++
++/*
++ *    probe - binds to the platform device
++ */
++static int __init pxa27x_udc_probe(struct platform_device *pdev)
++{
++      struct device *dev = &pdev->dev;
++      struct pxa27x_udc *udc = &memory;
++      int irq, retval;
++      u32 chiprev;
++
++      /* insist on Intel/ARM/XScale */
++      asm("mrc%? p15, 0, %0, c0, c0":"=r"(chiprev));
++      if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
++              printk(KERN_ERR "%s: not XScale!\n", driver_name);
++              return -ENODEV;
++      }
++
++      irq = platform_get_irq(pdev, 0);
++      if (irq < 0)
++              return -ENODEV;
++      pr_debug("%s: IRQ %d\n", driver_name, irq);
++
++      /* other non-static parts of init */
++      udc->dev = dev;
++      udc->mach = dev->platform_data;
++
++      /* Disable irq, erase old events and disable the pull up on the bus */
++      UDCICR0 = 0x00000000;
++      UDCICR1 = 0x00000000;
++      UDCISR0 = 0xffffffff;
++      UDCISR1 = 0xffffffff;
++      if (udc->mach->gpio_pullup) {
++              if ((retval = gpio_request(udc->mach->gpio_pullup,
++                                      "pca2xx_udc GPIO PULLUP"))) {
++                      dev_dbg(&pdev->dev,
++                                  "can't get pullup gpio %d, err: %d\n",
++                      udc->mach->gpio_pullup, retval);
++                      if (udc->mach->gpio_vbus)
++                              gpio_free(udc->mach->gpio_vbus);
++                      return -EBUSY;
++              }
++              gpio_direction_output(udc->mach->gpio_pullup, 0);
++      }
++
++      init_timer(&udc->timer);
++      udc->timer.function = udc_watchdog;
++      udc->timer.data = (unsigned long)udc;
++
++      device_initialize(&udc->gadget.dev);
++      udc->gadget.dev.parent = dev;
++      udc->gadget.dev.dma_mask = dev->dma_mask;
++
++      the_controller = udc;
++      dev_set_drvdata(dev, udc);
++
++      udc_disable(udc);
++      udc_init_ep(udc);
++      udc_reinit(udc);
++
++      /* irq setup after old hardware state is cleaned up */
++      retval = request_irq(irq, pxa27x_udc_irq, 0, driver_name, udc);
++      if (retval != 0) {
++              printk(KERN_ERR "%s: can't get irq %i, err %d\n",
++                     driver_name, irq, retval);
++              return -EBUSY;
++      }
++      udc->got_irq = 1;
++
++      create_proc_files();
++
++      return 0;
++}
++
++static void pxa27x_udc_shutdown(struct platform_device *_dev)
++{
++      pullup_off();
++}
++
++static int __exit pxa27x_udc_remove(struct platform_device *pdev)
++{
++      struct device *dev = &pdev->dev;
++      struct pxa27x_udc *udc = dev->driver_data;
++
++      udc_disable(udc);
++      remove_proc_files();
++      usb_gadget_unregister_driver(udc->driver);
++
++      if (udc->got_irq) {
++              free_irq(platform_get_irq(pdev, 0), udc);
++              udc->got_irq = 0;
++      }
++      if (machine_is_lubbock() && udc->got_disc) {
++              free_irq(LUBBOCK_USB_DISC_IRQ, udc);
++              udc->got_disc = 0;
++      }
++      dev_set_drvdata(dev, 0);
++      the_controller = 0;
++      return 0;
++}
++
++#ifdef CONFIG_PM
++static int pxa27x_udc_suspend(struct platform_device *pdev, pm_message_t state)
++{
++      struct device *dev = &pdev->dev;
++      struct pxa27x_udc *udc = dev->driver_data;
++      int i;
++
++      DMSG("%s will go into SUSPEND_POWER_DOWN\n", __FUNCTION__);
++      udc->udccsr0 = UDCCSR0;
++      for (i = 1; (i < UDC_EP_NUM); i++) {
++              if (udc->ep[i].assigned) {
++                      struct pxa27x_ep *ep = &udc->ep[i];
++
++                      ep->udccsr_value = *ep->reg_udccsr;
++                      ep->udccr_value = *ep->reg_udccr;
++                      DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n",
++                           i, *ep->reg_udccsr, *ep->reg_udccr);
++              }
++      }
++
++      udc_clear_mask_UDCCR(UDCCR_UDE);
++      pxa_set_cken(CKEN_USB, 0);
++
++      return 0;
++}
++
++static int pxa27x_udc_resume(struct platform_device *pdev)
++{
++      struct device *dev = &pdev->dev;
++      struct pxa27x_udc *udc = dev->driver_data;
++      int i;
++
++      DMSG("%s: udc resume\n", __FUNCTION__);
++
++      UDCCSR0 = udc->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME);
++      for (i = 1; i < UDC_EP_NUM; i++) {
++              if (udc->ep[i].assigned) {
++                      struct pxa27x_ep *ep = &udc->ep[i];
++
++                      *ep->reg_udccsr = ep->udccsr_value;
++                      *ep->reg_udccr = ep->udccr_value;
++                      DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n",
++                           i, *ep->reg_udccsr, *ep->reg_udccr);
++              }
++      }
++      udc_enable(udc);
++      /* OTGPH bit is set when sleep mode is entered.
++       * it indicates that OTG pad is retaining its state.
++       * Upon exit from sleep mode and before clearing OTGPH,
++       * Software must configure the USB OTG pad, UDC, and UHC
++       * to the state they were in before entering sleep mode.*/
++      PSSR |= PSSR_OTGPH;
++
++      return 0;
++}
++#else
++#define pxa27x_udc_suspend    NULL
++#define pxa27x_udc_resume     NULL
++#endif
++
++/*-------------------------------------------------------------------------*/
++
++static struct platform_driver pxa27x_udc_driver = {
++      .shutdown = pxa27x_udc_shutdown,
++      .remove = __exit_p(pxa27x_udc_remove),
++      .suspend = pxa27x_udc_suspend,
++      .resume = pxa27x_udc_resume,
++      .driver = {
++                 .owner = THIS_MODULE,
++                 .name = "pxa27x-udc",
++                 },
++};
++
++static int __init udc_init(void)
++{
++      printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
++      return platform_driver_probe(&pxa27x_udc_driver, pxa27x_udc_probe);
++}
++
++static void __exit udc_exit(void)
++{
++      platform_driver_unregister(&pxa27x_udc_driver);
++}
++
++module_init(udc_init);
++module_exit(udc_exit);
++
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell, Rodolfo Giometti");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.24/drivers/usb/gadget/pxa27x_udc.h
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/usb/gadget/pxa27x_udc.h
+@@ -0,0 +1,304 @@
++/*
++ * linux/drivers/usb/gadget/pxa27x_udc.h
++ * Intel PXA27x on-chip full speed USB device controller
++ *
++ * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
++ * Copyright (C) 2003 David Brownell
++ * Copyright (C) 2004 Intel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __LINUX_USB_GADGET_PXA27X_H
++#define __LINUX_USB_GADGET_PXA27X_H
++
++#include <linux/types.h>
++
++struct pxa27x_udc;
++
++struct pxa27x_ep {
++      struct usb_ep                           ep;
++      struct pxa27x_udc                       *dev;
++
++      const struct usb_endpoint_descriptor    *desc;
++      struct list_head                        queue;
++      unsigned long                           pio_irqs;
++      unsigned long                           dma_irqs;
++
++      int                                     dma;
++      unsigned                                fifo_size;
++      unsigned                                ep_num;
++      unsigned                                ep_type;
++
++      unsigned                                stopped : 1;
++      unsigned                                dma_con : 1;
++      unsigned                                dir_in : 1;
++      unsigned                                assigned : 1;
++
++      unsigned                                config;
++      unsigned                                interface;
++      unsigned                                aisn;
++      /* UDCCSR = UDC Control/Status Register for this EP
++       * UBCR = UDC Byte Count Remaining (contents of OUT fifo)
++       * UDCDR = UDC Endpoint Data Register (the fifo)
++       * UDCCR = UDC Endpoint Configuration Registers
++       * DRCM = DMA Request Channel Map
++       */
++      volatile u32                            *reg_udccsr;
++      volatile u32                            *reg_udcbcr;
++      volatile u32                            *reg_udcdr;
++      volatile u32                            *reg_udccr;
++#ifdef USE_DMA
++      volatile u32                            *reg_drcmr;
++#define       drcmr(n)  .reg_drcmr = & DRCMR ## n ,
++#else
++#define       drcmr(n)
++#endif
++
++#ifdef CONFIG_PM
++      unsigned                                udccsr_value;
++      unsigned                                udccr_value;
++#endif
++};
++
++struct pxa27x_request {
++      struct usb_request                      req;
++      struct list_head                        queue;
++};
++
++enum ep0_state {
++      EP0_IDLE,
++      EP0_IN_DATA_PHASE,
++      EP0_OUT_DATA_PHASE,
++//    EP0_END_XFER,
++      EP0_STALL,
++      EP0_NO_ACTION
++};
++
++#define EP0_FIFO_SIZE ((unsigned)16)
++#define BULK_FIFO_SIZE        ((unsigned)64)
++#define ISO_FIFO_SIZE ((unsigned)256)
++#define INT_FIFO_SIZE ((unsigned)8)
++
++struct udc_stats {
++      struct ep0stats {
++              unsigned long           ops;
++              unsigned long           bytes;
++      } read, write;
++      unsigned long                   irqs;
++};
++
++#ifdef CONFIG_USB_PXA27X_SMALL
++/* when memory's tight, SMALL config saves code+data.  */
++//#undef      USE_DMA
++//#define     UDC_EP_NUM      3
++#endif
++
++#ifndef       UDC_EP_NUM
++#define       UDC_EP_NUM      24
++#endif
++
++struct pxa27x_udc {
++      struct usb_gadget                       gadget;
++      struct usb_gadget_driver                *driver;
++
++      enum ep0_state                          ep0state;
++      struct udc_stats                        stats;
++      unsigned                                got_irq : 1,
++                                              got_disc : 1,
++                                              has_cfr : 1,
++                                              req_pending : 1,
++                                              req_std : 1,
++                                              req_config : 1;
++
++#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
++      struct timer_list                       timer;
++
++      struct device                           *dev;
++      struct pxa2xx_udc_mach_info             *mach;
++      u64                                     dma_mask;
++      struct pxa27x_ep                        ep [UDC_EP_NUM];
++
++      unsigned                                configuration,
++                                              interface,
++                                              alternate;
++#ifdef CONFIG_PM
++      unsigned                                udccsr0;
++#endif
++};
++
++/*-------------------------------------------------------------------------*/
++#if 0
++#ifdef DEBUG
++#define HEX_DISPLAY(n)        do { \
++      if (machine_is_mainstone())\
++               { MST_LEDDAT1 = (n); } \
++      } while(0)
++
++#define HEX_DISPLAY1(n)       HEX_DISPLAY(n)
++
++#define HEX_DISPLAY2(n)       do { \
++      if (machine_is_mainstone()) \
++              { MST_LEDDAT2 = (n); } \
++      } while(0)
++
++#endif /* DEBUG */
++#endif
++/*-------------------------------------------------------------------------*/
++
++/* LEDs are only for debug */
++#ifndef HEX_DISPLAY
++#define HEX_DISPLAY(n)                do {} while(0)
++#endif
++
++#ifndef LED_CONNECTED_ON
++#define LED_CONNECTED_ON      do {} while(0)
++#define LED_CONNECTED_OFF     do {} while(0)
++#endif
++#ifndef LED_EP0_ON
++#define LED_EP0_ON            do {} while (0)
++#define LED_EP0_OFF           do {} while (0)
++#endif
++
++static struct pxa27x_udc *the_controller;
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * Debugging support vanishes in non-debug builds.  DBG_NORMAL should be
++ * mostly silent during normal use/testing, with no timing side-effects.
++ */
++#define DBG_NORMAL    1       /* error paths, device state transitions */
++#define DBG_VERBOSE   2       /* add some success path trace info */
++#define DBG_NOISY     3       /* ... even more: request level */
++#define DBG_VERY_NOISY        4       /* ... even more: packet level */
++
++#ifdef DEBUG
++
++static const char *state_name[] = {
++      "EP0_IDLE",
++      "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
++      "EP0_END_XFER", "EP0_STALL"
++};
++
++#define DMSG(stuff...) printk(KERN_ERR "udc: " stuff)
++
++#ifdef VERBOSE
++#    define UDC_DEBUG DBG_VERBOSE
++#else
++#    define UDC_DEBUG DBG_NORMAL
++#endif
++
++static void __attribute__ ((__unused__))
++dump_udccr(const char *label)
++{
++      u32     udccr = UDCCR;
++      DMSG("%s 0x%08x =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n",
++              label, udccr,
++              (udccr & UDCCR_OEN) ? " oen":"",
++              (udccr & UDCCR_AALTHNP) ? " aalthnp":"",
++              (udccr & UDCCR_AHNP) ? " rem" : "",
++              (udccr & UDCCR_BHNP) ? " rstir" : "",
++              (udccr & UDCCR_DWRE) ? " dwre" : "",
++              (udccr & UDCCR_SMAC) ? " smac" : "",
++              (udccr & UDCCR_EMCE) ? " emce" : "",
++              (udccr & UDCCR_UDR) ? " udr" : "",
++              (udccr & UDCCR_UDA) ? " uda" : "",
++              (udccr & UDCCR_UDE) ? " ude" : "",
++              (udccr & UDCCR_ACN) >> UDCCR_ACN_S,
++              (udccr & UDCCR_AIN) >> UDCCR_AIN_S,
++              (udccr & UDCCR_AAISN)>> UDCCR_AAISN_S );
++}
++
++static void __attribute__ ((__unused__))
++dump_udccsr0(const char *label)
++{
++      u32             udccsr0 = UDCCSR0;
++
++      DMSG("%s %s 0x%08x =%s%s%s%s%s%s%s\n",
++              label, state_name[the_controller->ep0state], udccsr0,
++              (udccsr0 & UDCCSR0_SA) ? " sa" : "",
++              (udccsr0 & UDCCSR0_RNE) ? " rne" : "",
++              (udccsr0 & UDCCSR0_FST) ? " fst" : "",
++              (udccsr0 & UDCCSR0_SST) ? " sst" : "",
++              (udccsr0 & UDCCSR0_DME) ? " dme" : "",
++              (udccsr0 & UDCCSR0_IPR) ? " ipr" : "",
++              (udccsr0 & UDCCSR0_OPC) ? " opr" : "");
++}
++
++static void __attribute__ ((__unused__))
++dump_state(struct pxa27x_udc *dev)
++{
++      unsigned        i;
++
++      DMSG("%s, udcicr %02X.%02X, udcsir %02X.%02x, udcfnr %02X\n",
++              state_name[dev->ep0state],
++              UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR);
++      dump_udccr("udccr");
++
++      if (!dev->driver) {
++              DMSG("no gadget driver bound\n");
++              return;
++      } else
++              DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
++
++
++      dump_udccsr0 ("udccsr0");
++      DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
++              dev->stats.write.bytes, dev->stats.write.ops,
++              dev->stats.read.bytes, dev->stats.read.ops);
++
++      for (i = 1; i < UDC_EP_NUM; i++) {
++              if (dev->ep [i].desc == 0)
++                      continue;
++              DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccsr);
++      }
++}
++
++#if 0
++static void dump_regs(u8 ep)
++{
++      DMSG("EP:%d UDCCSR:0x%08x UDCBCR:0x%08x\n UDCCR:0x%08x\n",
++              ep,UDCCSN(ep), UDCBCN(ep), UDCCN(ep));
++}
++static void dump_req (struct pxa27x_request *req)
++{
++      struct usb_request *r = &req->req;
++
++      DMSG("%s: buf:0x%08x length:%d dma:0x%08x actual:%d\n",
++                      __FUNCTION__, (unsigned)r->buf, r->length,
++                      r->dma, r->actual);
++}
++#endif
++
++#else
++
++#define DMSG(stuff...)                do{}while(0)
++
++#define       dump_udccr(x)   do{}while(0)
++#define       dump_udccsr0(x) do{}while(0)
++#define       dump_state(x)   do{}while(0)
++
++#define UDC_DEBUG ((unsigned)0)
++
++#endif
++
++#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
++
++#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
++#define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
++
++
++#endif /* __LINUX_USB_GADGET_PXA27X_H */
+Index: linux-2.6.24/drivers/usb/gadget/serial.c
+===================================================================
+--- linux-2.6.24.orig/drivers/usb/gadget/serial.c
++++ linux-2.6.24/drivers/usb/gadget/serial.c
+@@ -1360,20 +1360,20 @@
+ 
+       usb_ep_autoconfig_reset(gadget);
+ 
+-      ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
++      ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc, 0, 0, 0);
+       if (!ep)
+               goto autoconf_fail;
+       EP_IN_NAME = ep->name;
+       ep->driver_data = ep;   /* claim the endpoint */
+ 
+-      ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
++      ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc, 0, 0, 0);
+       if (!ep)
+               goto autoconf_fail;
+       EP_OUT_NAME = ep->name;
+       ep->driver_data = ep;   /* claim the endpoint */
+ 
+       if (use_acm) {
+-              ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
++              ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc, 0, 0, 0);
+               if (!ep) {
+                       printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name);
+                       goto autoconf_fail;
+Index: linux-2.6.24/drivers/usb/gadget/zero.c
+===================================================================
+--- linux-2.6.24.orig/drivers/usb/gadget/zero.c
++++ linux-2.6.24/drivers/usb/gadget/zero.c
+@@ -1112,7 +1112,7 @@
+        * but there may also be important quirks to address.
+        */
+       usb_ep_autoconfig_reset (gadget);
+-      ep = usb_ep_autoconfig (gadget, &fs_source_desc);
++      ep = usb_ep_autoconfig (gadget, &fs_source_desc, 0, 0, 0);
+       if (!ep) {
+ autoconf_fail:
+               printk (KERN_ERR "%s: can't autoconfigure on %s\n",
+@@ -1122,7 +1122,7 @@
+       EP_IN_NAME = ep->name;
+       ep->driver_data = ep;   /* claim */
+ 
+-      ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
++      ep = usb_ep_autoconfig (gadget, &fs_sink_desc, 0, 0, 0);
+       if (!ep)
+               goto autoconf_fail;
+       EP_OUT_NAME = ep->name;
+Index: linux-2.6.24/include/asm-arm/arch-pxa/udc.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-pxa/udc.h
++++ linux-2.6.24/include/asm-arm/arch-pxa/udc.h
+@@ -2,6 +2,7 @@
+  * linux/include/asm-arm/arch-pxa/udc.h
+  *
+  */
++#include <asm/arch/pxa-regs.h>
+ #include <asm/mach/udc_pxa2xx.h>
+ 
+ extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+Index: linux-2.6.24/include/linux/usb/gadget.h
+===================================================================
+--- linux-2.6.24.orig/include/linux/usb/gadget.h
++++ linux-2.6.24/include/linux/usb/gadget.h
+@@ -397,10 +397,28 @@
+ 
+ struct usb_gadget;
+ 
++/**
++ * struct usb_endpoint_config - possible configurations of a given endpoint
++ * @config: the configuration number
++ * @interface: the interface number
++ * @altinterface: the altinterface number
++ *
++ * Used as an array to pass information about the possible configurations
++ * of a given endpoint to the bus controller.
++ */
++struct usb_endpoint_config {
++      int     config;
++      int     interface;
++      int     altinterface;
++};
++
+ /* the rest of the api to the controller hardware: device operations,
+  * which don't involve endpoints (or i/o).
+  */
+ struct usb_gadget_ops {
++      struct usb_ep*  (*ep_alloc)(struct usb_gadget *gadget,
++                              struct usb_endpoint_descriptor *desc,
++                              int config, int interface, int alt);
+       int     (*get_frame)(struct usb_gadget *);
+       int     (*wakeup)(struct usb_gadget *);
+       int     (*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
+@@ -857,7 +875,8 @@
+ /* utility wrapping a simple endpoint selection policy */
+ 
+ extern struct usb_ep *usb_ep_autoconfig (struct usb_gadget *,
+-                      struct usb_endpoint_descriptor *) __devinit;
++                      struct usb_endpoint_descriptor *,
++                      int, int, int) __devinit;
+ 
+ extern void usb_ep_autoconfig_reset (struct usb_gadget *) __devinit;
+ 

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pxa27x_overlay-r8.patch b/packages/linux/linux-ezx-2.6.24/patches/pxa27x_overlay-r8.patch
new file mode 100644 (file)
index 0000000..17749a9
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pxa27x_overlay-r8.patch
@@ -0,0 +1,2439 @@
+ drivers/video/Kconfig               |   18 
+ drivers/video/Makefile              |    1 
+ drivers/video/pxafb.c               |  305 +++++--
+ drivers/video/pxafb.h               |   65 +
+ drivers/video/pxafb_overlay.c       | 1525 ++++++++++++++++++++++++++++++++++++
+ include/asm-arm/arch-pxa/pxa-regs.h |  111 ++
+ 6 files changed, 1969 insertions(+), 56 deletions(-)
+
+Index: linux-2.6.24/drivers/video/Kconfig
+===================================================================
+--- linux-2.6.24.orig/drivers/video/Kconfig
++++ linux-2.6.24/drivers/video/Kconfig
+@@ -1729,6 +1729,24 @@
+ 
+         If unsure, say N.
+ 
++choice
++      prompt "PXA LCD type"
++      depends on FB_PXA
++
++config FB_PXA_LCD_QVGA
++        bool "QVGA(320x240)"
++
++config FB_PXA_LCD_VGA
++        bool "VGA (640x480)"
++
++endchoice
++
++config FB_PXA_OVERLAY
++    tristate "PXA LCD overlay support"
++    depends on FB_PXA
++    ---help---
++        Frame buffer overlay driver for PXA27x
++
+ config FB_PXA_PARAMETERS
+       bool "PXA LCD command line parameters"
+       default n
+Index: linux-2.6.24/drivers/video/Makefile
+===================================================================
+--- linux-2.6.24.orig/drivers/video/Makefile
++++ linux-2.6.24/drivers/video/Makefile
+@@ -96,6 +96,7 @@
+ obj-$(CONFIG_FB_CIRRUS)                 += cirrusfb.o
+ obj-$(CONFIG_FB_ASILIANT)       += asiliantfb.o
+ obj-$(CONFIG_FB_PXA)            += pxafb.o
++obj-$(CONFIG_FB_PXA_OVERLAY)    += pxafb_overlay.o
+ obj-$(CONFIG_FB_W100)           += w100fb.o
+ obj-$(CONFIG_FB_AU1100)                 += au1100fb.o
+ obj-$(CONFIG_FB_AU1200)                 += au1200fb.o
+Index: linux-2.6.24/drivers/video/pxafb.c
+===================================================================
+--- linux-2.6.24.orig/drivers/video/pxafb.c
++++ linux-2.6.24/drivers/video/pxafb.c
+@@ -59,17 +59,49 @@
+ #define LCCR0_INVALID_CONFIG_MASK (LCCR0_OUM|LCCR0_BM|LCCR0_QDM|LCCR0_DIS|LCCR0_EFM|LCCR0_IUM|LCCR0_SFM|LCCR0_LDM|LCCR0_ENB)
+ #define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP|LCCR3_VSP|LCCR3_PCD|LCCR3_BPP)
+ 
++wait_queue_head_t fcs_wait_eof;
++int fcs_in_eof;
++static DECLARE_MUTEX(fcs_lcd_sem);
++
+ static void (*pxafb_backlight_power)(int);
+ static void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
+ 
+ static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *);
+-static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
++void pxafb_set_ctrlr_state(struct pxafb_info *fbi, u_int state);
+ 
+ #ifdef CONFIG_FB_PXA_PARAMETERS
+ #define PXAFB_OPTIONS_SIZE 256
+ static char g_options[PXAFB_OPTIONS_SIZE] __devinitdata = "";
+ #endif
+ 
++static struct pxafb_rgb def_rgb_8 = {
++      red:    { offset: 0,  length: 8, },
++      green:  { offset: 0,  length: 8, },
++      blue:   { offset: 0,  length: 8, },
++      transp: { offset: 0,  length: 0, },
++};
++
++static struct pxafb_rgb def_rgb_16 = {
++      red:    { offset: 11, length: 5, },
++      green:  { offset: 5,  length: 6, },
++      blue:   { offset: 0,  length: 5, },
++      transp: { offset: 0,  length: 0, },
++};
++
++static struct pxafb_rgb def_rgb_18 = {
++      red:    { offset: 12, length: 6, },
++      green:  { offset: 6,  length: 6, },
++      blue:   { offset: 0,  length: 6, },
++      transp: { offset: 0,  length: 0, },
++};
++
++static struct pxafb_rgb def_rgb_24 = {
++      red:    { offset: 16, length: 8, },
++      green:  { offset: 8,  length: 8, },
++      blue:   { offset: 0,  length: 8, },
++      transp: { offset: 0,  length: 0, },
++};
++
+ static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state)
+ {
+       unsigned long flags;
+@@ -209,6 +241,10 @@
+         case 4:  ret = LCCR3_4BPP; break;
+         case 8:  ret = LCCR3_8BPP; break;
+         case 16: ret = LCCR3_16BPP; break;
++        case 18: ret = LCCR3_18BPP; break;
++        case 19: ret = LCCR3_19BPP; break;
++        case 24: ret = LCCR3_24BPP; break;
++        case 25: ret = LCCR3_25BPP; break;
+         }
+         return ret;
+ }
+@@ -320,18 +356,34 @@
+        * The pixel packing format is described on page 7-11 of the
+        * PXA2XX Developer's Manual.
+          */
+-      if (var->bits_per_pixel == 16) {
+-              var->red.offset   = 11; var->red.length   = 5;
+-              var->green.offset = 5;  var->green.length = 6;
+-              var->blue.offset  = 0;  var->blue.length  = 5;
+-              var->transp.offset = var->transp.length = 0;
+-      } else {
+-              var->red.offset = var->green.offset = var->blue.offset = var->transp.offset = 0;
+-              var->red.length   = 8;
+-              var->green.length = 8;
+-              var->blue.length  = 8;
+-              var->transp.length = 0;
+-      }
++      switch (var->bits_per_pixel) {
++      case 16:
++              /* 2 pixels per line */
++              var->red    = def_rgb_16.red;
++              var->green  = def_rgb_16.green;
++              var->blue   = def_rgb_16.blue;
++              var->transp = def_rgb_16.transp;
++              break;
++      case 18:
++      case 19:
++              var->red    = def_rgb_18.red;
++              var->green  = def_rgb_18.green;
++              var->blue   = def_rgb_18.blue;
++              var->transp = def_rgb_18.transp;
++              break;
++      case 24:
++      case 25:
++              var->red    = def_rgb_24.red;
++              var->green  = def_rgb_24.green;
++              var->blue   = def_rgb_24.blue;
++              var->transp = def_rgb_24.transp;
++              break;
++       default:
++              var->red    = def_rgb_8.red;
++              var->green  = def_rgb_8.green;
++              var->blue   = def_rgb_8.blue;
++              var->transp = def_rgb_8.transp;
++    }
+ 
+ #ifdef CONFIG_CPU_FREQ
+       pr_debug("pxafb: dma period = %d ps, clock = %d kHz\n",
+@@ -345,7 +397,7 @@
+ static inline void pxafb_set_truecolor(u_int is_true_color)
+ {
+       pr_debug("pxafb: true_color = %d\n", is_true_color);
+-      // do your machine-specific setup if needed
++      /* do your machine-specific setup if needed */
+ }
+ 
+ /*
+@@ -360,7 +412,8 @@
+ 
+       pr_debug("pxafb: set_par\n");
+ 
+-      if (var->bits_per_pixel == 16)
++      if (var->bits_per_pixel == 16 || var->bits_per_pixel == 18 ||var->bits_per_pixel == 19
++        || var->bits_per_pixel == 24 || var->bits_per_pixel == 25)
+               fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+       else if (!fbi->cmap_static)
+               fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+@@ -373,12 +426,25 @@
+               fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
+       }
+ 
+-      fbi->fb.fix.line_length = var->xres_virtual *
+-                                var->bits_per_pixel / 8;
+-      if (var->bits_per_pixel == 16)
+-              fbi->palette_size = 0;
+-      else
+-              fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel;
++      switch (var->bits_per_pixel) {
++      case 16:
++              fbi->fb.fix.line_length = var->xres_virtual * 2;
++              fbi->palette_size = 0;
++              break;
++      case 18:
++      case 19:
++              fbi->fb.fix.line_length = var->xres_virtual * 3;
++              fbi->palette_size = 0;
++              break;
++      case 24:
++      case 25:
++              fbi->fb.fix.line_length = var->xres_virtual * 4;
++              fbi->palette_size = 0;
++              break;
++      default:
++              fbi->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
++              fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel;
++      }
+ 
+       if ((fbi->lccr4 & LCCR4_PAL_FOR_MASK) == LCCR4_PAL_FOR_0)
+               palette_mem_size = fbi->palette_size * sizeof(u16);
+@@ -395,7 +461,8 @@
+        */
+       pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
+ 
+-      if (fbi->fb.var.bits_per_pixel == 16)
++      if (fbi->fb.var.bits_per_pixel == 16 || fbi->fb.var.bits_per_pixel == 18 ||fbi->fb.var.bits_per_pixel == 19
++        || fbi->fb.var.bits_per_pixel == 24 || fbi->fb.var.bits_per_pixel == 25)
+               fb_dealloc_cmap(&fbi->fb.cmap);
+       else
+               fb_alloc_cmap(&fbi->fb.cmap, 1<<fbi->fb.var.bits_per_pixel, 0);
+@@ -441,7 +508,7 @@
+  *    16 bpp mode does not really use the palette, so this will not
+  *      blank the display in all modes.
+  */
+-static int pxafb_blank(int blank, struct fb_info *info)
++int pxafb_blank(int blank, struct fb_info *info)
+ {
+       struct pxafb_info *fbi = (struct pxafb_info *)info;
+       int i;
+@@ -458,19 +525,20 @@
+                       for (i = 0; i < fbi->palette_size; i++)
+                               pxafb_setpalettereg(i, 0, 0, 0, 0, info);
+ 
+-              pxafb_schedule_work(fbi, C_DISABLE);
+-              //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
++              pxafb_schedule_work(fbi, C_BLANK);
++              /* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */
+               break;
+ 
+       case FB_BLANK_UNBLANK:
+-              //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
++              /* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */
+               if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
+                   fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
+                       fb_set_cmap(&fbi->fb.cmap, info);
+-              pxafb_schedule_work(fbi, C_ENABLE);
++              pxafb_schedule_work(fbi, C_UNBLANK);
+       }
+       return 0;
+ }
++EXPORT_SYMBOL(pxafb_blank);
+ 
+ static int pxafb_mmap(struct fb_info *info,
+                     struct vm_area_struct *vma)
+@@ -606,6 +674,10 @@
+       case 4:
+       case 8:
+       case 16:
++      case 18:
++      case 19:
++      case 24:
++      case 25:
+               break;
+       default:
+               printk(KERN_ERR "%s: invalid bit depth %d\n",
+@@ -637,7 +709,10 @@
+ 
+       new_regs.lccr0 = fbi->lccr0 |
+               (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |
+-                 LCCR0_QDM | LCCR0_BM  | LCCR0_OUM);
++#ifdef CONFIG_PXA27x  /* Enable overlay for PXA27x */
++               LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM |
++#endif
++                 LCCR0_QDM | LCCR0_BM | LCCR0_OUM);
+ 
+       new_regs.lccr1 =
+               LCCR1_DisWdth(var->xres) +
+@@ -696,7 +771,7 @@
+ 
+       fbi->dmadesc_fbhigh_cpu->fsadr = fbi->screen_dma;
+       fbi->dmadesc_fbhigh_cpu->fidr = 0;
+-      fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL;
++      fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL | LDCMD_EOFINT;
+ 
+       fbi->dmadesc_palette_cpu->fsadr = fbi->palette_dma;
+       fbi->dmadesc_palette_cpu->fidr  = 0;
+@@ -708,7 +783,8 @@
+                                                       sizeof(u32);
+       fbi->dmadesc_palette_cpu->ldcmd |= LDCMD_PAL;
+ 
+-      if (var->bits_per_pixel == 16) {
++      if (var->bits_per_pixel == 16 || var->bits_per_pixel == 18 ||var->bits_per_pixel == 19
++        || var->bits_per_pixel == 24 || var->bits_per_pixel == 25) {
+               /* palette shouldn't be loaded in true-color mode */
+               fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
+               fbi->fdadr0 = fbi->dmadesc_fbhigh_dma; /* no pal just fbhigh */
+@@ -763,8 +839,8 @@
+ }
+ 
+ /*
+- * NOTE!  The following functions are purely helpers for set_ctrlr_state.
+- * Do not call them directly; set_ctrlr_state does the correct serialisation
++ * NOTE!  The following functions are purely helpers for pxafb_set_ctrlr_state.
++ * Do not call them directly; pxafb_set_ctrlr_state does the correct serialisation
+  * to ensure that things happen in the right way 100% of time time.
+  *    -- rmk
+  */
+@@ -786,7 +862,8 @@
+ 
+ static void pxafb_setup_gpio(struct pxafb_info *fbi)
+ {
+-      int gpio, ldd_bits;
++      int gpio;
++      int ldd_bits = 0;
+         unsigned int lccr0 = fbi->lccr0;
+ 
+       /*
+@@ -796,28 +873,56 @@
+       /* 4 bit interface */
+       if ((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
+           (lccr0 & LCCR0_SDS) == LCCR0_Sngl &&
+-          (lccr0 & LCCR0_DPD) == LCCR0_4PixMono)
++          (lccr0 & LCCR0_DPD) == LCCR0_4PixMono) {
+               ldd_bits = 4;
+-
++      }
+       /* 8 bit interface */
+         else if (((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
+                 ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_DPD) == LCCR0_8PixMono)) ||
+                  ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
+-                (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl))
++                (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl)) {
+               ldd_bits = 8;
+-
++      }
+       /* 16 bit interface */
+-      else if ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
+-               ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act))
+-              ldd_bits = 16;
++      else if ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
++              ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act)) {
++              switch (fbi->fb.var.bits_per_pixel) {
++              case 16:
++#ifdef CONFIG_PXA27x
++                      /* bits 58-77 */
++                      GPDR1 |= (0x3f << 26);
++                      GPDR2 |= 0x00003fff;
+ 
++                      GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20);
++                      GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa;
++#endif
++                      ldd_bits = 16;
++                      break;
++              case 18:
++              case 19:
++              case 24:
++              case 25:
++#ifdef CONFIG_PXA27x
++                      /* bits 58-77 and 86, 87 */
++                      GPDR1 |= (0x3f << 26);
++                      GPDR2 |= 0x00c03fff;
++
++                      GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20);
++                      GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa;
++                      GAFR2_U = (GAFR2_U & 0xffff0fff) | 0xa000;
++#endif
++                      ldd_bits = 25;
++                      break;
++              }
++      }
+       else {
+               printk(KERN_ERR "pxafb_setup_gpio: unable to determine bits per pixel\n");
+               return;
+         }
+ 
+-      for (gpio = 58; ldd_bits; gpio++, ldd_bits--)
++      for (gpio = 58; ldd_bits > 0; gpio++, ldd_bits--) {
+               pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
++      }
+       pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
+       pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
+       pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
+@@ -837,6 +942,7 @@
+       /* enable LCD controller clock */
+       clk_enable(fbi->clk);
+ 
++      down(&fcs_lcd_sem);
+       /* Sequence from 11.7.10 */
+       LCCR3 = fbi->reg_lccr3;
+       LCCR2 = fbi->reg_lccr2;
+@@ -847,6 +953,8 @@
+       FDADR1 = fbi->fdadr1;
+       LCCR0 |= LCCR0_ENB;
+ 
++      up(&fcs_lcd_sem);
++
+       pr_debug("FDADR0 0x%08x\n", (unsigned int) FDADR0);
+       pr_debug("FDADR1 0x%08x\n", (unsigned int) FDADR1);
+       pr_debug("LCCR0 0x%08x\n", (unsigned int) LCCR0);
+@@ -862,6 +970,7 @@
+ 
+       pr_debug("pxafb: disabling LCD controller\n");
+ 
++      down(&fcs_lcd_sem);
+       set_current_state(TASK_UNINTERRUPTIBLE);
+       add_wait_queue(&fbi->ctrlr_wait, &wait);
+ 
+@@ -871,6 +980,7 @@
+ 
+       schedule_timeout(200 * HZ / 1000);
+       remove_wait_queue(&fbi->ctrlr_wait, &wait);
++      up(&fcs_lcd_sem);
+ 
+       /* disable LCD controller clock */
+       clk_disable(fbi->clk);
+@@ -888,6 +998,11 @@
+               LCCR0 |= LCCR0_LDM;
+               wake_up(&fbi->ctrlr_wait);
+       }
++      if (lcsr & LCSR_EOF && fcs_in_eof) {
++              LCCR0 |= LCCR0_EFM;
++              fcs_in_eof = 0;
++              wake_up(&fcs_wait_eof);
++      }
+ 
+       LCSR = lcsr;
+       return IRQ_HANDLED;
+@@ -898,7 +1013,7 @@
+  * sleep when disabling the LCD controller, or if we get two contending
+  * processes trying to alter state.
+  */
+-static void set_ctrlr_state(struct pxafb_info *fbi, u_int state)
++void pxafb_set_ctrlr_state(struct pxafb_info *fbi, u_int state)
+ {
+       u_int old_state;
+ 
+@@ -920,7 +1035,9 @@
+                */
+               if (old_state != C_DISABLE && old_state != C_DISABLE_PM) {
+                       fbi->state = state;
+-                      //TODO __pxafb_lcd_power(fbi, 0);
++                      /* TODO __pxafb_lcd_power(fbi, 0); */
++                      if(fbi->set_overlay_ctrlr_state)
++                              fbi->set_overlay_ctrlr_state(fbi, C_DISABLE);
+                       pxafb_disable_controller(fbi);
+               }
+               break;
+@@ -934,6 +1051,8 @@
+                       fbi->state = state;
+                       __pxafb_backlight_power(fbi, 0);
+                       __pxafb_lcd_power(fbi, 0);
++                      if(fbi->set_overlay_ctrlr_state)
++                              fbi->set_overlay_ctrlr_state(fbi, C_DISABLE);
+                       if (old_state != C_DISABLE_CLKCHANGE)
+                               pxafb_disable_controller(fbi);
+               }
+@@ -947,7 +1066,9 @@
+               if (old_state == C_DISABLE_CLKCHANGE) {
+                       fbi->state = C_ENABLE;
+                       pxafb_enable_controller(fbi);
+-                      //TODO __pxafb_lcd_power(fbi, 1);
++                      /* TODO __pxafb_lcd_power(fbi, 1); */
++                      if(fbi->set_overlay_ctrlr_state)
++                              fbi->set_overlay_ctrlr_state(fbi, C_ENABLE);
+               }
+               break;
+ 
+@@ -959,9 +1080,13 @@
+                */
+               if (old_state == C_ENABLE) {
+                       __pxafb_lcd_power(fbi, 0);
++                      if(fbi->set_overlay_ctrlr_state)
++                              fbi->set_overlay_ctrlr_state(fbi, C_DISABLE);
+                       pxafb_disable_controller(fbi);
+                       pxafb_setup_gpio(fbi);
+                       pxafb_enable_controller(fbi);
++                      if(fbi->set_overlay_ctrlr_state)
++                              fbi->set_overlay_ctrlr_state(fbi, C_ENABLE);
+                       __pxafb_lcd_power(fbi, 1);
+               }
+               break;
+@@ -987,11 +1112,46 @@
+                       pxafb_enable_controller(fbi);
+                       __pxafb_lcd_power(fbi, 1);
+                       __pxafb_backlight_power(fbi, 1);
++                      if(fbi->set_overlay_ctrlr_state)
++                              fbi->set_overlay_ctrlr_state(fbi, C_ENABLE);
+               }
+               break;
++
++      case C_BLANK:
++              /*
++               * Disable controller, blank overlays if exist.
++               */
++              if ((old_state != C_DISABLE) && (old_state != C_BLANK)) {
++                      fbi->state = state;
++                      __pxafb_backlight_power(fbi, 0);
++                      __pxafb_lcd_power(fbi, 0);
++                      if(fbi->set_overlay_ctrlr_state)
++                              fbi->set_overlay_ctrlr_state(fbi, C_BLANK);
++                      if (old_state != C_DISABLE_CLKCHANGE)
++                              pxafb_disable_controller(fbi);
++              }
++              break;
++
++      case C_UNBLANK:
++              /*
++               * Power up the LCD screen, enable controller, and
++               * turn on the backlight, unblank overlays if exist.
++               */
++              if ((old_state != C_ENABLE) && (old_state != C_UNBLANK)) {
++                      fbi->state = C_UNBLANK;
++                      pxafb_setup_gpio(fbi);
++                      pxafb_enable_controller(fbi);
++                      __pxafb_lcd_power(fbi, 1);
++                      __pxafb_backlight_power(fbi, 1);
++                      if(fbi->set_overlay_ctrlr_state)
++                              fbi->set_overlay_ctrlr_state(fbi, C_UNBLANK);
++              }
++              break;
++
+       }
+       up(&fbi->ctrlr_sem);
+ }
++EXPORT_SYMBOL(pxafb_set_ctrlr_state);
+ 
+ /*
+  * Our LCD controller task (which is called when we blank or unblank)
+@@ -1003,7 +1163,7 @@
+               container_of(work, struct pxafb_info, task);
+       u_int state = xchg(&fbi->task_state, -1);
+ 
+-      set_ctrlr_state(fbi, state);
++      pxafb_set_ctrlr_state(fbi, state);
+ }
+ 
+ #ifdef CONFIG_CPU_FREQ
+@@ -1018,19 +1178,29 @@
+ pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
+ {
+       struct pxafb_info *fbi = TO_INF(nb, freq_transition);
+-      //TODO struct cpufreq_freqs *f = data;
++      /* TODO struct cpufreq_freqs *f = data; */
++      struct cpufreq_freqs *clkinfo;
+       u_int pcd;
++      u_int lccr3;
+ 
+       switch (val) {
+       case CPUFREQ_PRECHANGE:
+-              set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
++              pxafb_set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
+               break;
+ 
+       case CPUFREQ_POSTCHANGE:
+-              pcd = get_pcd(fbi, fbi->fb.var.pixclock);
++              clkinfo = (struct cpufreq_freqs *)data;
++              /* If leaving a 13kHz state with the LCD sustained */
++              if ((clkinfo->old == 13000))
++                      break;
++
++              pcd = get_pcd(fbi->fb.var.pixclock);
++              lccr3 = fbi->reg_lccr3;
+               set_hsync_time(fbi, pcd);
+               fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
+-              set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
++              pxafb_set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
++              if (lccr3 != fbi->reg_lccr3 && !((LCCR0 & LCCR0_DIS) || !(LCCR0 & LCCR0_ENB)))
++                      LCCR3 = fbi->reg_lccr3;
+               break;
+       }
+       return 0;
+@@ -1049,7 +1219,7 @@
+               printk(KERN_DEBUG "min dma period: %d ps, "
+                       "new clock %d kHz\n", pxafb_display_dma_period(var),
+                       policy->max);
+-              // TODO: fill in min/max values
++              /* TODO: fill in min/max values */
+               break;
+ #if 0
+       case CPUFREQ_NOTIFY:
+@@ -1075,7 +1245,7 @@
+ {
+       struct pxafb_info *fbi = platform_get_drvdata(dev);
+ 
+-      set_ctrlr_state(fbi, C_DISABLE_PM);
++      pxafb_set_ctrlr_state(fbi, C_DISABLE_PM);
+       return 0;
+ }
+ 
+@@ -1083,7 +1253,11 @@
+ {
+       struct pxafb_info *fbi = platform_get_drvdata(dev);
+ 
+-      set_ctrlr_state(fbi, C_ENABLE_PM);
++      pxafb_set_ctrlr_state(fbi, C_ENABLE_PM);
++//RP#ifdef CONFIG_PXA27x
++//RP  LCCR4 |= (1 << 31); /* Disable the PCD Divisor, PCDDIV */
++//RP  LCCR4 |= (5 << 17); /* Undocumented feature */
++//RP#endif
+       return 0;
+ }
+ #else
+@@ -1197,11 +1371,21 @@
+       fbi->task_state                 = (u_char)-1;
+ 
+       for (i = 0; i < inf->num_modes; i++) {
+-              smemlen = mode[i].xres * mode[i].yres * mode[i].bpp / 8;
++              if (mode[i].bpp <= 16) {       /* 8, 16 bpp */
++                      smemlen = mode[i].xres * mode[i].yres * mode[i].bpp / 8;
++              } else if ( mode[i].bpp > 19 ) { /* 24, 25 bpp */
++                      smemlen = mode[i].xres * mode[i].yres * 4;
++              } else {                          /* 18, 19 bpp */
++                      /* packed format */
++                      smemlen = mode[i].xres * mode[i].yres * 3;
++              }
++
+               if (smemlen > fbi->fb.fix.smem_len)
+                       fbi->fb.fix.smem_len = smemlen;
+       }
+ 
++      fbi->set_overlay_ctrlr_state    = NULL;
++
+       init_waitqueue_head(&fbi->ctrlr_wait);
+       INIT_WORK(&fbi->task, pxafb_task);
+       init_MUTEX(&fbi->ctrlr_sem);
+@@ -1268,6 +1452,10 @@
+                               case 4:
+                               case 8:
+                               case 16:
++                              case 18:
++                              case 19:
++                              case 24:
++                              case 25:
+                                       inf->modes[0].bpp = bpp;
+                                       dev_info(dev, "overriding bit depth: %d\n", bpp);
+                                       break;
+@@ -1416,7 +1604,7 @@
+       fbi = pxafb_init_fbinfo(&dev->dev);
+       if (!fbi) {
+               dev_err(&dev->dev, "Failed to initialize framebuffer device\n");
+-              ret = -ENOMEM; // only reason for pxafb_init_fbinfo to fail is kmalloc
++              ret = -ENOMEM; /* only reason for pxafb_init_fbinfo to fail is kmalloc */
+               goto failed;
+       }
+ 
+@@ -1451,7 +1639,7 @@
+       }
+ 
+ #ifdef CONFIG_PM
+-      // TODO
++      /* TODO */
+ #endif
+ 
+ #ifdef CONFIG_CPU_FREQ
+@@ -1464,7 +1652,12 @@
+       /*
+        * Ok, now enable the LCD controller
+        */
+-      set_ctrlr_state(fbi, C_ENABLE);
++      pxafb_set_ctrlr_state(fbi, C_ENABLE);
++//#ifdef CONFIG_PXA27x
++//    LCCR4 |= (1 << 31); /* Disabel the PCD Divisor, PCDDIV */
++//    LCCR4 |= (5 << 17); /* Undocumented feature */
++//#endif
++      init_waitqueue_head(&fcs_wait_eof);
+ 
+       return 0;
+ 
+Index: linux-2.6.24/drivers/video/pxafb.h
+===================================================================
+--- linux-2.6.24.orig/drivers/video/pxafb.h
++++ linux-2.6.24/drivers/video/pxafb.h
+@@ -29,6 +29,60 @@
+       unsigned int lccr3;
+ };
+ 
++struct pxafb_rgb {
++      struct fb_bitfield      red;
++      struct fb_bitfield      green;
++      struct fb_bitfield      blue;
++      struct fb_bitfield      transp;
++};
++
++#ifdef CONFIG_PXA27x
++/* PXA Overlay Framebuffer Support */
++struct overlayfb_info
++{
++      struct fb_info  fb;
++
++      struct fb_var_screeninfo old_var;
++
++      struct semaphore mutex;
++      unsigned long    refcount;
++
++      struct pxafb_info *basefb;
++
++      unsigned long   map_cpu;
++      unsigned long   screen_cpu;
++      unsigned long   palette_cpu;
++      unsigned long   map_size;
++      unsigned long   palette_size;
++
++      dma_addr_t      screen_dma;
++      dma_addr_t      map_dma;
++      dma_addr_t      palette_dma;
++
++      volatile u_char state;
++
++      /* overlay specific info */
++      unsigned long   xpos;           /* screen position (x, y)*/
++      unsigned long   ypos;
++      unsigned long   format;
++
++      /* additional */
++      union {
++              struct pxafb_dma_descriptor *dma0;
++              struct pxafb_dma_descriptor *dma1;
++              struct {
++                      struct pxafb_dma_descriptor *dma2;
++                      struct pxafb_dma_descriptor *dma3;
++                      struct pxafb_dma_descriptor *dma4;
++              };
++              struct {
++                      struct pxafb_dma_descriptor *dma5_pal;
++                      struct pxafb_dma_descriptor *dma5_frame;
++              };
++      };
++};
++#endif
++
+ /* PXA LCD DMA descriptor */
+ struct pxafb_dma_descriptor {
+       unsigned int fdadr;
+@@ -90,6 +144,14 @@
+       wait_queue_head_t       ctrlr_wait;
+       struct work_struct      task;
+ 
++#ifdef CONFIG_PXA27x
++      /* PXA Overlay Framebuffer Support */
++      struct overlayfb_info  *overlay1fb;
++      struct overlayfb_info  *overlay2fb;
++      struct overlayfb_info  *cursorfb;
++#endif
++      void (*set_overlay_ctrlr_state)(struct pxafb_info *, u_int);
++
+ #ifdef CONFIG_CPU_FREQ
+       struct notifier_block   freq_transition;
+       struct notifier_block   freq_policy;
+@@ -109,6 +171,9 @@
+ #define C_DISABLE_PM          (5)
+ #define C_ENABLE_PM           (6)
+ #define C_STARTUP             (7)
++#define C_BLANK               (8)
++#define C_UNBLANK             (9)
++
+ 
+ #define PXA_NAME      "PXA"
+ 
+Index: linux-2.6.24/drivers/video/pxafb_overlay.c
+===================================================================
+--- /dev/null
++++ linux-2.6.24/drivers/video/pxafb_overlay.c
+@@ -0,0 +1,1525 @@
++/*
++ *  linux/drivers/video/pxafb_overlay.c
++ *
++ *  Copyright (c) 2004, Intel Corporation
++ *
++ *    Code Status:
++ *    2004/10/28: <yan.yin@intel.com>
++ *      - Ported to 2.6 kernel
++ *      - Made overlay driver a loadable module
++ *      - Merged overlay optimized patch
++ *    2004/03/10: <stanley.cai@intel.com>
++ *      - Fixed Bugs
++ *      - Added workaround for overlay1&2
++ *    2003/08/27: <yu.tang@intel.com>
++ *      - Added Overlay 1 & Overlay2 & Hardware Cursor support
++ *
++ *
++ *    This software program is licensed subject to the GNU Lesser General
++ *    Public License (LGPL). Version 2.1, February 1999, available at
++ *    http://www.gnu.org/copyleft/lesser.html
++ *
++ *    Intel PXA27x LCD Controller Frame Buffer Overlay Driver
++ *
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++#include <linux/fb.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/cpufreq.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/uaccess.h>
++#include <asm/arch/bitfield.h>
++#include <asm/arch/pxafb.h>
++#include <asm/arch/pxa-regs.h>
++
++#include "pxafb.h"
++
++/* LCD enhancement : Overlay 1 & 2 & Hardware Cursor */
++
++/*
++ * LCD enhancement : Overlay 1
++ *
++ * Features:
++ * - support 16bpp (No palette)
++ */
++/*
++ * debugging?
++ */
++#define DEBUG 0
++
++#ifdef  DEBUG
++#define dbg(fmt,arg...) printk(KERN_ALERT "%s(): " fmt "\n", __FUNCTION__, ##arg)
++#else
++#define dbg(fmt,arg...)
++#endif
++
++static int overlay1fb_enable(struct fb_info *info);
++static int overlay2fb_enable(struct fb_info *info);
++static int cursorfb_enable(struct fb_info *info);
++
++static int overlay1fb_disable(struct fb_info *info);
++static int overlay2fb_disable(struct fb_info *info);
++static int cursorfb_disable(struct fb_info *info);
++
++static int overlay1fb_blank(int blank, struct fb_info *info);
++static int overlay2fb_blank(int blank, struct fb_info *info);
++static int cursorfb_blank(int blank, struct fb_info *info);
++
++extern void pxafb_set_ctrlr_state(struct pxafb_info *fbi, u_int state);
++extern int pxafb_blank(int blank, struct fb_info *info);
++
++static struct pxafb_rgb def_rgb_18 = {
++      red:    { offset: 12, length: 6, },
++      green:  { offset: 6,  length: 6, },
++      blue:   { offset: 0,  length: 6, },
++      transp: { offset: 0,  length: 0, },
++};
++
++static struct pxafb_rgb def_rgbt_16 = {
++      red:    { offset: 10, length: 5, },
++      green:  { offset: 5,  length: 5, },
++      blue:   { offset: 0,  length: 5, },
++      transp: { offset: 15,  length: 1, },
++};
++
++static struct pxafb_rgb  def_rgbt_19 = {
++      red:    { offset: 12, length: 6, },
++      green:  { offset: 6,  length: 6, },
++      blue:   { offset: 0,  length: 6, },
++      transp: { offset: 18, length: 1, },
++};
++
++static struct pxafb_rgb def_rgbt_24 = {
++      red:    { offset: 16, length: 7, },
++      green:  { offset: 8,  length: 8, },
++      blue:   { offset: 0,  length: 8, },
++      transp: { offset: 0,  length: 0, },
++};
++
++static struct pxafb_rgb def_rgbt_25 = {
++      red:    { offset: 16, length: 8, },
++      green:  { offset: 8,  length: 8, },
++      blue:   { offset: 0,  length: 8, },
++      transp: { offset: 24, length: 1, },
++};
++
++#define CLEAR_LCD_INTR(reg, intr) do {  \
++      reg = (intr);                   \
++}while(0)
++
++#define WAIT_FOR_LCD_INTR(reg,intr,timeout) ({        \
++      int __done =0;                          \
++      int __t = timeout;                      \
++      while (__t) {                           \
++              __done = (reg) & (intr);        \
++              if (__done) break;              \
++              mdelay(10);                     \
++              __t--;                          \
++      }                                       \
++      if (!__t) dbg("wait " #intr " timeount");\
++      __done;                                 \
++})
++
++#define DISABLE_OVERLAYS(fbi) do {                                    \
++      if (fbi->overlay1fb && (fbi->overlay1fb->state == C_ENABLE)) {  \
++              overlay1fb_disable((struct fb_info*)fbi->overlay1fb);   \
++      }                                                               \
++      if (fbi->overlay2fb && (fbi->overlay2fb->state == C_ENABLE)) {  \
++              overlay2fb_disable((struct fb_info*)fbi->overlay2fb);   \
++      }                                                               \
++      if (fbi->cursorfb && (fbi->cursorfb->state == C_ENABLE)) {      \
++              cursorfb_disable((struct fb_info*)fbi->cursorfb);       \
++      }                                                               \
++}while(0)
++
++#define ENABLE_OVERLAYS(fbi) do {                                     \
++      if (fbi->overlay1fb && (fbi->overlay1fb->state == C_DISABLE)) { \
++              overlay1fb_enable((struct fb_info*)fbi->overlay1fb);    \
++      }                                                               \
++      if (fbi->overlay2fb && (fbi->overlay2fb->state == C_DISABLE)) { \
++              overlay2fb_enable((struct fb_info*)fbi->overlay2fb);    \
++      }                                                               \
++      if (fbi->cursorfb && (fbi->cursorfb->state == C_DISABLE)) {     \
++              cursorfb_enable((struct fb_info*)fbi->cursorfb);        \
++      }                                                               \
++}while(0)
++
++#define BLANK_OVERLAYS(fbi) do {                                      \
++      if (fbi->overlay1fb && (fbi->overlay1fb->state == C_ENABLE)) {  \
++              overlay1fb_disable((struct fb_info*)fbi->overlay1fb);   \
++              fbi->overlay1fb->state = C_BLANK;                       \
++      }                                                               \
++      if (fbi->overlay2fb && (fbi->overlay2fb->state == C_ENABLE)) {  \
++              overlay2fb_disable((struct fb_info*)fbi->overlay2fb);   \
++              fbi->overlay2fb->state = C_BLANK;                       \
++      }                                                               \
++      if (fbi->cursorfb && (fbi->cursorfb->state == C_ENABLE)) {      \
++              cursorfb_disable((struct fb_info*)fbi->cursorfb);       \
++              fbi->cursorfb->state = C_BLANK;                 \
++      }                                                               \
++}while(0)
++
++#define UNBLANK_OVERLAYS(fbi) do {                                    \
++      if (fbi->overlay1fb && (fbi->overlay1fb->state == C_BLANK)) {   \
++              overlay1fb_enable((struct fb_info*)fbi->overlay1fb);    \
++              fbi->overlay1fb->state = C_ENABLE;                      \
++      }                                                               \
++      if (fbi->overlay2fb && (fbi->overlay2fb->state == C_BLANK)) {   \
++              overlay2fb_enable((struct fb_info*)fbi->overlay2fb);    \
++              fbi->overlay2fb->state = C_ENABLE;                      \
++      }                                                               \
++      if (fbi->cursorfb && (fbi->cursorfb->state == C_BLANK)) {       \
++              cursorfb_enable((struct fb_info*)fbi->cursorfb);        \
++              fbi->cursorfb->state = C_ENABLE;                        \
++      }                                                               \
++}while(0)
++
++static int overlay1fb_open(struct fb_info *info, int user)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++      int ret = 0;
++
++/* If basefb is disable, enable fb. */
++      if (fbi->basefb && fbi->basefb->state != C_ENABLE)
++              pxafb_blank(VESA_NO_BLANKING, (struct fb_info *)(fbi->basefb));
++
++      down(&fbi->mutex);
++
++      if (fbi->refcount)
++              ret = -EACCES;
++      else
++              fbi->refcount ++;
++
++      up(&fbi->mutex);
++
++      /* Initialize the variables in overlay1 framebuffer. */
++      fbi->fb.var.xres = fbi->fb.var.yres = 0;
++      fbi->fb.var.bits_per_pixel = 0;
++
++      return ret;
++}
++
++static int overlay1fb_release(struct fb_info *info, int user)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++      down(&fbi->mutex);
++
++      if (fbi->refcount)
++              fbi->refcount --;
++
++      up(&fbi->mutex);
++      /* disable overlay when released */
++      overlay1fb_blank(1, info);
++
++      return 0;
++}
++
++static int overlay1fb_map_video_memory(struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++
++      if (fbi->map_cpu)
++              dma_free_writecombine(NULL, fbi->map_size, (void*)fbi->map_cpu,  fbi->map_dma);
++      fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE);
++
++      fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size,
++                                             &fbi->map_dma, GFP_KERNEL );
++
++      if (!fbi->map_cpu) return -ENOMEM;
++
++      fbi->screen_cpu = fbi->map_cpu + PAGE_SIZE;
++      fbi->screen_dma = fbi->map_dma + PAGE_SIZE;
++
++      fbi->fb.fix.smem_start = fbi->screen_dma;
++
++      /* setup dma descriptor */
++      fbi->dma1 = (struct pxafb_dma_descriptor*)
++              (fbi->screen_cpu - sizeof(struct pxafb_dma_descriptor));
++
++      fbi->dma1->fdadr = (fbi->screen_dma - sizeof(struct pxafb_dma_descriptor));
++      fbi->dma1->fsadr = fbi->screen_dma;
++      fbi->dma1->fidr  = 0;
++      fbi->dma1->ldcmd = fbi->fb.fix.smem_len;
++
++      return 0;
++}
++
++static int overlay1fb_enable(struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++      unsigned long bpp1;
++
++      if (!fbi->map_cpu) return -EINVAL;
++
++      switch (fbi->fb.var.bits_per_pixel) {
++      case 16:
++              bpp1 = 0x4;
++              break;
++      case 18:
++              bpp1 = 0x6;
++              break;
++      case 19:
++              bpp1 = 0x8;
++              break;
++      case 24:
++              bpp1 = 0x9;
++              break;
++      case 25:
++              bpp1 = 0xa;
++              break;
++      default:
++              return -EINVAL;
++      }
++
++      /* disable branch/start/end of frame interrupt */
++      LCCR5 |= (LCCR5_IUM1 | LCCR5_BSM1 | LCCR5_EOFM1 | LCCR5_SOFM1);
++
++      if (fbi->state == C_DISABLE || fbi->state == C_BLANK)
++              FDADR1 = (fbi->dma1->fdadr);
++      else
++              FBR1 = fbi->dma1->fdadr | 0x1;
++
++      /* enable overlay 1 window */
++      OVL1C2 = (fbi->ypos << 10) | fbi->xpos;
++      OVL1C1 = OVL1C1_O1EN | (bpp1 << 20) | ((fbi->fb.var.yres-1)<<10) | (fbi->fb.var.xres-1);
++
++      fbi->state = C_ENABLE;
++
++      return 0;
++}
++
++static int overlay1fb_disable(struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*)info;
++      int done;
++
++      if ((fbi->state == C_DISABLE) || (fbi->state == C_BLANK))
++               return 0;
++
++      fbi->state = C_DISABLE;
++
++      /* clear O1EN */
++      OVL1C1 &= ~OVL1C1_O1EN;
++
++      CLEAR_LCD_INTR(LCSR1, LCSR1_BS1);
++      FBR1 = 0x3;
++      done = WAIT_FOR_LCD_INTR(LCSR1, LCSR1_BS1, 100);
++
++      if (!done) {
++              pr_debug(KERN_INFO "%s: timeout\n", __FUNCTION__);
++              return -1;
++      }
++      return 0;
++}
++
++static int overlay1fb_blank(int blank, struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++      int err=0;
++
++      switch (blank) {
++      case 0:
++              err = overlay1fb_enable(info);
++              if (err) {
++                      fbi->state = C_DISABLE;
++                      pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE);
++              }
++              break;
++      case 1:
++              err = overlay1fb_disable(info);
++              if (err) {
++                      fbi->state = C_DISABLE;
++                      pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE);
++              }
++              break;
++      default:
++              break;
++      }
++
++      return err;
++}
++
++static int overlay1fb_check_var( struct fb_var_screeninfo *var, struct fb_info *info)
++{
++      int xpos, ypos;
++      struct overlayfb_info *fbi=(struct overlayfb_info*)info;
++
++      /* must in base frame */
++      xpos = (var->nonstd & 0x3ff);
++      ypos = ((var->nonstd>>10) & 0x3ff);
++
++      if ( (xpos + var->xres) > fbi->basefb->fb.var.xres )
++              return -EINVAL;
++
++      if ( (ypos + var->yres) > fbi->basefb->fb.var.yres )
++              return -EINVAL;
++
++      switch (var->bits_per_pixel) {
++      case 16:
++              if ( var->xres & 0x1 ) {
++                      printk("xres should be a multiple of 2 pixels!\n");
++                      return -EINVAL;
++              }
++              break;
++      case 18:
++      case 19:
++              if ( var->xres & 0x7 ) {
++                      printk("xres should be a multiple of 8 pixels!\n");
++                      return -EINVAL;
++              }
++              break;
++      default:
++              break;
++      }
++
++      fbi->old_var=*var;
++
++      var->activate=FB_ACTIVATE_NOW;
++
++      return 0;
++}
++
++
++static int overlay1fb_set_par(struct fb_info *info)
++{
++      int nbytes=0, err=0, pixels_per_line=0;
++
++      struct overlayfb_info *fbi=(struct overlayfb_info*)info;
++      struct fb_var_screeninfo *var = &fbi->fb.var;
++
++      info->flags &= ~FBINFO_MISC_USEREVENT;
++
++      if (fbi->state == C_BLANK)
++              return 0;
++
++      if (fbi->state == C_DISABLE)
++              goto out1;
++
++      /* only xpos & ypos change */
++      if ( (var->xres == fbi->old_var.xres) &&
++              (var->yres == fbi->old_var.yres) &&
++              (var->bits_per_pixel == fbi->old_var.bits_per_pixel) )
++              goto out2;
++
++out1:
++      switch(var->bits_per_pixel) {
++              case 16:
++                      /* 2 pixels per line */
++                      pixels_per_line = (fbi->fb.var.xres + 0x1) & (~0x1);
++                      nbytes = 2;
++
++                      var->red    = def_rgbt_16.red;
++                      var->green  = def_rgbt_16.green;
++                      var->blue   = def_rgbt_16.blue;
++                      var->transp = def_rgbt_16.transp;
++
++                      break;
++              case 18:
++                      /* 8 pixels per line */
++                      pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7);
++                      nbytes = 3;
++
++                      var->red    = def_rgb_18.red;
++                      var->green  = def_rgb_18.green;
++                      var->blue   = def_rgb_18.blue;
++                      var->transp = def_rgb_18.transp;
++
++                      break;
++              case 19:
++                      /* 8 pixels per line */
++                      pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7);
++                      nbytes = 3;
++
++                      var->red    = def_rgbt_19.red;
++                      var->green  = def_rgbt_19.green;
++                      var->blue   = def_rgbt_19.blue;
++                      var->transp = def_rgbt_19.transp;
++
++                      break;
++              case 24:
++                      pixels_per_line = fbi->fb.var.xres;
++                      nbytes = 4;
++
++                      var->red    = def_rgbt_24.red;
++                      var->green  = def_rgbt_24.green;
++                      var->blue   = def_rgbt_24.blue;
++                      var->transp = def_rgbt_24.transp;
++
++                      break;
++              case 25:
++                      pixels_per_line = fbi->fb.var.xres;
++                      nbytes = 4;
++
++                      var->red    = def_rgbt_25.red;
++                      var->green  = def_rgbt_25.green;
++                      var->blue   = def_rgbt_25.blue;
++                      var->transp = def_rgbt_25.transp;
++
++                      break;
++              }
++
++              fbi->fb.fix.line_length = nbytes * pixels_per_line;
++              fbi->fb.fix.smem_len = fbi->fb.fix.line_length * fbi->fb.var.yres;
++
++              err= overlay1fb_map_video_memory((struct fb_info*)fbi);
++
++              if (err)
++                      return err;
++
++out2:
++              fbi->xpos = var->nonstd & 0x3ff;
++              fbi->ypos = (var->nonstd>>10) & 0x3ff;
++
++              overlay1fb_enable(info);
++
++              return 0;
++
++}
++
++static struct fb_ops overlay1fb_ops = {
++      .owner                  = THIS_MODULE,
++      .fb_open                = overlay1fb_open,
++      .fb_release             = overlay1fb_release,
++      .fb_check_var           = overlay1fb_check_var,
++      .fb_set_par             = overlay1fb_set_par,
++      .fb_blank               = overlay1fb_blank,
++      .fb_fillrect            = cfb_fillrect,
++      .fb_copyarea            = cfb_copyarea,
++      .fb_imageblit           = cfb_imageblit,
++};
++
++ /*
++ * LCD enhancement : Overlay 2
++ *
++ * Features:
++ * - support planar YCbCr420/YCbCr422/YCbCr444;
++ */
++static int overlay2fb_open(struct fb_info *info, int user)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++      int ret = 0;
++
++      /* if basefb is disable, enable fb. */
++      if (fbi->basefb && fbi->basefb->state != C_ENABLE)
++              pxafb_blank(VESA_NO_BLANKING, (struct fb_info *)(fbi->basefb));
++
++      down(&fbi->mutex);
++
++      if (fbi->refcount)
++              ret = -EACCES;
++      else
++              fbi->refcount ++;
++
++      up(&fbi->mutex);
++      fbi->fb.var.xres = fbi->fb.var.yres = 0;
++
++      return ret;
++}
++
++static int overlay2fb_release(struct fb_info *info, int user)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++
++      down(&fbi->mutex);
++
++      if (fbi->refcount)
++              fbi->refcount --;
++
++      up(&fbi->mutex);
++
++      /* disable overlay when released */
++      overlay2fb_blank(1, info);
++
++      return 0;
++}
++
++static int overlay2fb_map_YUV_memory( struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++      unsigned int ylen, cblen, crlen, aylen, acblen, acrlen;
++      unsigned int yoff, cboff, croff;
++      unsigned int xres,yres;
++      unsigned int nbytes;
++
++      ylen = cblen = crlen = aylen = acblen = acrlen = 0;
++      yoff = cboff = croff = 0;
++
++      if (fbi->map_cpu)
++              dma_free_writecombine(NULL, fbi->map_size, (void*)fbi->map_cpu,  fbi->map_dma);
++
++      yres = fbi->fb.var.yres;
++
++      switch(fbi->format) {
++      case 0x4: /* YCbCr 4:2:0 planar */
++              pr_debug("420 planar\n");
++              /* 16 pixels per line */
++              xres = (fbi->fb.var.xres + 0xf) & (~0xf);
++              fbi->fb.fix.line_length = xres;
++
++              nbytes = xres * yres;
++              ylen = nbytes;
++              cblen = crlen = (nbytes/4);
++
++              break;
++      case 0x3: /* YCbCr 4:2:2 planar */
++              /* 8 pixles per line */
++              pr_debug("422 planar\n");
++              xres = (fbi->fb.var.xres + 0x7) & (~0x7);
++              fbi->fb.fix.line_length = xres;
++
++              nbytes = xres * yres;
++              ylen  = nbytes;
++              cblen = crlen = (nbytes/2);
++
++              break;
++      case 0x2: /* YCbCr 4:4:4 planar */
++              /* 4 pixels per line */
++              pr_debug("444 planar\n");
++              xres = (fbi->fb.var.xres + 0x3) & (~0x3);
++              fbi->fb.fix.line_length = xres;
++
++              nbytes = xres * yres;
++              ylen  = cblen = crlen = nbytes;
++              break;
++      }
++
++      /* 16-bytes alignment for DMA */
++      aylen  = (ylen + 0xf) & (~0xf);
++      acblen = (cblen + 0xf) & (~0xf);
++      acrlen = (crlen + 0xf) & (~0xf);
++
++      fbi->fb.fix.smem_len = aylen + acblen + acrlen;
++
++      /* alloc memory */
++
++      fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE);
++      fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size,
++                                             &fbi->map_dma, GFP_KERNEL );
++
++      if (!fbi->map_cpu) return -ENOMEM;
++
++      fbi->screen_cpu = fbi->map_cpu + PAGE_SIZE;
++      fbi->screen_dma = fbi->map_dma + PAGE_SIZE;
++
++      fbi->fb.fix.smem_start = fbi->screen_dma;
++
++      /* setup dma for Planar format */
++      fbi->dma2 = (struct pxafb_dma_descriptor*)
++              (fbi->screen_cpu - sizeof(struct pxafb_dma_descriptor));
++      fbi->dma3 = fbi->dma2 - 1;
++      fbi->dma4 = fbi->dma3 - 1;
++
++      /* offset */
++      yoff = 0;
++      cboff = aylen;
++      croff = cboff + acblen;
++
++      /* Y vector */
++      fbi->dma2->fdadr = (fbi->screen_dma - sizeof(struct pxafb_dma_descriptor));
++      fbi->dma2->fsadr = fbi->screen_dma + yoff;
++      fbi->dma2->fidr  = 0;
++      fbi->dma2->ldcmd = ylen;
++
++      /* Cb vector */
++      fbi->dma3->fdadr = (fbi->dma2->fdadr - sizeof(struct pxafb_dma_descriptor));
++      fbi->dma3->fsadr = (fbi->screen_dma + cboff);
++      fbi->dma3->fidr  = 0;
++      fbi->dma3->ldcmd = cblen;
++
++      /* Cr vector */
++
++      fbi->dma4->fdadr = (fbi->dma3->fdadr - sizeof(struct pxafb_dma_descriptor));
++      fbi->dma4->fsadr = (fbi->screen_dma + croff);
++      fbi->dma4->fidr  = 0;
++      fbi->dma4->ldcmd = crlen;
++
++      /* adjust for user */
++      fbi->fb.var.red.length   = ylen;
++      fbi->fb.var.red.offset   = yoff;
++      fbi->fb.var.green.length = cblen;
++      fbi->fb.var.green.offset = cboff;
++      fbi->fb.var.blue.length  = crlen;
++      fbi->fb.var.blue.offset  = croff;
++
++      return 0;
++};
++
++static int overlay2fb_map_RGB_memory( struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++      struct fb_var_screeninfo *var = &fbi->fb.var;
++      int pixels_per_line=0 , nbytes=0;
++
++      if (fbi->map_cpu)
++              dma_free_writecombine(NULL,  fbi->map_size, (void*)fbi->map_cpu, fbi->map_dma);
++
++      switch(var->bits_per_pixel) {
++      case 16:
++              /* 2 pixels per line */
++              pixels_per_line = (fbi->fb.var.xres + 0x1) & (~0x1);
++              nbytes = 2;
++
++              var->red    = def_rgbt_16.red;
++              var->green  = def_rgbt_16.green;
++              var->blue   = def_rgbt_16.blue;
++              var->transp = def_rgbt_16.transp;
++              break;
++
++      case 18:
++              /* 8 pixels per line */
++              pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7);
++              nbytes = 3;
++
++              var->red    = def_rgb_18.red;
++              var->green  = def_rgb_18.green;
++              var->blue   = def_rgb_18.blue;
++              var->transp = def_rgb_18.transp;
++
++              break;
++      case 19:
++              /* 8 pixels per line */
++              pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7);
++              nbytes = 3;
++
++              var->red    = def_rgbt_19.red;
++              var->green  = def_rgbt_19.green;
++              var->blue   = def_rgbt_19.blue;
++              var->transp = def_rgbt_19.transp;
++
++              break;
++      case 24:
++              pixels_per_line = fbi->fb.var.xres;
++              nbytes = 4;
++
++              var->red    = def_rgbt_24.red;
++              var->green  = def_rgbt_24.green;
++              var->blue   = def_rgbt_24.blue;
++              var->transp = def_rgbt_24.transp;
++
++              break;
++
++      case 25:
++              pixels_per_line = fbi->fb.var.xres;
++              nbytes = 4;
++
++              var->red    = def_rgbt_25.red;
++              var->green  = def_rgbt_25.green;
++              var->blue   = def_rgbt_25.blue;
++              var->transp = def_rgbt_25.transp;
++
++              break;
++      }
++
++      fbi->fb.fix.line_length = nbytes * pixels_per_line;
++      fbi->fb.fix.smem_len = fbi->fb.fix.line_length * fbi->fb.var.yres;
++
++      fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE);
++      fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size,
++                                             &fbi->map_dma, GFP_KERNEL );
++
++      if (!fbi->map_cpu) return -ENOMEM;
++
++      fbi->screen_cpu = fbi->map_cpu + PAGE_SIZE;
++      fbi->screen_dma = fbi->map_dma + PAGE_SIZE;
++
++      fbi->fb.fix.smem_start = fbi->screen_dma;
++
++      /* setup dma descriptor */
++      fbi->dma2 = (struct pxafb_dma_descriptor*)
++              (fbi->screen_cpu - sizeof(struct pxafb_dma_descriptor));
++
++      fbi->dma2->fdadr = (fbi->screen_dma - sizeof(struct pxafb_dma_descriptor));
++      fbi->dma2->fsadr = fbi->screen_dma;
++      fbi->dma2->fidr  = 0;
++      fbi->dma2->ldcmd = fbi->fb.fix.smem_len;
++
++      return 0;
++}
++
++static int overlay2fb_enable(struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++      unsigned long bpp2;
++      unsigned int xres, yres;
++
++      if (!fbi->map_cpu) return -EINVAL;
++
++      switch(fbi->fb.var.bits_per_pixel) {
++      case 16:
++              bpp2 = 0x4;
++              break;
++      case 18:
++              bpp2 = 0x6;
++              break;
++      case 19:
++              bpp2 = 0x8;
++              break;
++      case 24:
++              bpp2 = 0x9;
++              break;
++      case 25:
++              bpp2 = 0xa;
++              break;
++      default:
++              return -EINVAL;
++      }
++
++        /* disable branch/start/end of frame interrupt */
++      LCCR5 |= (LCCR5_IUM4 | LCCR5_IUM3 | LCCR5_IUM2 |
++                LCCR5_BSM4 | LCCR5_BSM3 | LCCR5_BSM2 |
++                LCCR5_EOFM4 | LCCR5_EOFM3 | LCCR5_EOFM2 |
++                LCCR5_SOFM4 | LCCR5_SOFM3 | LCCR5_SOFM2);
++
++      if (fbi->format == 0) {
++              /* overlay2 RGB resolution, RGB and YUV have different xres value*/
++              xres = fbi->fb.var.xres;
++              yres = fbi->fb.var.yres;
++
++              OVL2C2 = (fbi->format << 20) | (fbi->ypos << 10) | fbi->xpos;
++              OVL2C1 = OVL2C1_O2EN | (bpp2 << 20) | ((yres-1)<<10) | (xres-1);
++              /* setup RGB DMA */
++              if (fbi->state == C_DISABLE || fbi->state == C_BLANK)
++                      FDADR2 = fbi->dma2->fdadr;
++              else
++                      FBR2 = fbi->dma2->fdadr | 0x1;
++      } else {
++              /* overlay2 YUV resolution */
++              xres = fbi->fb.fix.line_length;
++              yres = fbi->fb.var.yres;
++
++              OVL2C2 = (fbi->format << 20) | (fbi->ypos << 10) | fbi->xpos;
++              OVL2C1 = OVL2C1_O2EN | (bpp2 << 20) | ((yres-1)<<10) | (xres-1);
++
++              if (fbi->state == C_DISABLE || fbi->state == C_BLANK) {
++                      FDADR2 = fbi->dma2->fdadr;
++                      FDADR3 = fbi->dma3->fdadr;
++                      FDADR4 = fbi->dma4->fdadr;
++              } else {
++                      FBR2 = fbi->dma2->fdadr | 0x01;
++                      FBR3 = fbi->dma3->fdadr | 0x01;
++                      FBR4 = fbi->dma4->fdadr | 0x01;
++              }
++      }
++
++      fbi->state = C_ENABLE;
++      return 0;
++}
++
++static int overlay2fb_disable(struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*)info;
++      int done;
++
++      if (fbi->state == C_DISABLE)
++              return 0;
++      if (fbi->state == C_BLANK) {
++              fbi->state = C_DISABLE;
++              return 0;
++      }
++
++      fbi->state = C_DISABLE;
++
++      /* clear O2EN */
++      OVL2C1 &= ~OVL2C1_O2EN;
++
++      /* Make overlay2 can't disable/enable
++       * correctly sometimes.
++       */
++      CLEAR_LCD_INTR(LCSR1, LCSR1_BS2);
++
++      if (fbi->format == 0)
++              FBR2 = 0x3;
++      else {
++              FBR2 = 0x3;
++              FBR3 = 0x3;
++              FBR4 = 0x3;
++      }
++
++      done = WAIT_FOR_LCD_INTR(LCSR1, LCSR1_BS2, 100);
++
++      if (!done) {
++              pr_debug(KERN_INFO "%s: timeout\n", __FUNCTION__);
++              return -1;
++      }
++      return 0;
++}
++
++static int overlay2fb_blank(int blank, struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++      int err=0;
++
++      switch(blank)
++      {
++      case 0:
++              err = overlay2fb_enable(info);
++              if (err) {
++                      fbi->state = C_DISABLE;
++                      pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE);
++              }
++              break;
++      case 1:
++              err = overlay2fb_disable(info);
++              if (err) {
++                      fbi->state = C_DISABLE;
++                      pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE);
++              }
++              break;
++      default:
++              /* reserved */
++              break;
++      }
++
++      return err;
++}
++
++
++static int overlay2fb_check_var( struct fb_var_screeninfo *var, struct fb_info *info)
++{
++      int xpos, ypos, xres, yres;
++      int format;
++      struct overlayfb_info *fbi=(struct overlayfb_info*)info;
++
++      xres=yres=0;
++
++      xpos = (var->nonstd & 0x3ff);
++      ypos = (var->nonstd >> 10) & 0x3ff;
++      format = (var->nonstd >>20) & 0x7;
++
++
++      /* Palnar YCbCr444, YCbCr422, YCbCr420 */
++      if ( (format != 0x4) && (format != 0x3) && (format != 0x2) && (format !=0x0))
++              return -EINVAL;
++
++      /* dummy pixels */
++      switch(format) {
++      case 0x0: /* RGB */
++              xres = var->xres;
++              break;
++      case 0x2: /* 444 */
++              xres = (var->xres + 0x3) & ~(0x3);
++              break;
++      case 0x3: /* 422 */
++              xres = (var->xres + 0x7) & ~(0x7);
++              break;
++      case 0x4: /* 420 */
++              xres = (var->xres + 0xf) & ~(0xf);
++              break;
++      }
++      yres = var->yres;
++
++      if ( (xpos + xres) > fbi->basefb->fb.var.xres )
++              return -EINVAL;
++
++      if ( (ypos + yres) > fbi->basefb->fb.var.yres )
++              return -EINVAL;
++
++      fbi->old_var=*var;
++
++      var->activate=FB_ACTIVATE_NOW;
++
++      return 0;
++
++}
++
++
++/*
++ * overlay2fb_set_var()
++ *
++ * var.nonstd is used as YCbCr format.
++ * var.red/green/blue is used as (Y/Cb/Cr) vector
++ */
++
++static int overlay2fb_set_par(struct fb_info *info)
++{
++      unsigned int xpos, ypos;
++      int format, err;
++
++      struct overlayfb_info *fbi=(struct overlayfb_info*)info;
++      struct fb_var_screeninfo *var = &fbi->fb.var;
++
++      info->flags &= ~FBINFO_MISC_USEREVENT;
++
++      if (fbi->state == C_BLANK)
++              return 0;
++
++      if (fbi->state == C_DISABLE)
++              goto out1;
++
++      if ( (var->xres == fbi->old_var.xres) &&
++              (var->yres == fbi->old_var.yres) &&
++              (var->bits_per_pixel == fbi->old_var.bits_per_pixel) &&
++              (((var->nonstd>>20) & 0x7) == fbi->format) )
++              goto out2;
++
++out1:
++      xpos = var->nonstd & 0x3ff;
++      ypos = (var->nonstd>>10) & 0x3ff;
++      format = (var->nonstd>>20) & 0x7;
++
++
++      fbi->format = format;
++      if ( fbi->format==0 )
++              err = overlay2fb_map_RGB_memory(info);
++      else
++              err = overlay2fb_map_YUV_memory(info);
++
++      if (err) return err;
++
++out2:
++      /* position */
++      fbi->xpos = var->nonstd & 0x3ff;
++      fbi->ypos = (var->nonstd>>10) & 0x3ff;
++
++      overlay2fb_enable(info);
++
++      return 0;
++}
++
++static struct fb_ops overlay2fb_ops = {
++      .owner                  = THIS_MODULE,
++      .fb_open                = overlay2fb_open,
++      .fb_release             = overlay2fb_release,
++      .fb_check_var           = overlay2fb_check_var,
++      .fb_set_par             = overlay2fb_set_par,
++      .fb_blank               = overlay2fb_blank,
++      .fb_fillrect            = cfb_fillrect,
++      .fb_copyarea            = cfb_copyarea,
++      .fb_imageblit           = cfb_imageblit,
++};
++
++/* Hardware cursor */
++
++/* Bulverde Cursor Modes */
++struct cursorfb_mode{
++      int xres;
++      int yres;
++      int bpp;
++};
++
++static struct cursorfb_mode cursorfb_modes[]={
++      { 32,  32, 2},
++      { 32,  32, 2},
++      { 32,  32, 2},
++      { 64,  64, 2},
++      { 64,  64, 2},
++      { 64,  64, 2},
++      {128, 128, 1},
++      {128, 128, 1}
++};
++
++static int cursorfb_enable(struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++
++      if (!fbi->map_cpu) return -EINVAL;
++
++      CCR &= ~CCR_CEN;
++
++      /* set palette format
++       *
++       * FIXME: if only cursor uses palette
++       */
++      LCCR4 = (LCCR4 & (~(0x3<<15))) | (0x1<<15);
++
++      /* disable branch/start/end of frame interrupt */
++      LCCR5 |= (LCCR5_IUM5 | LCCR5_BSM5 | LCCR5_EOFM5 | LCCR5_SOFM5);
++
++      /* load palette and frame data */
++      if (fbi->state == C_DISABLE) {
++              FDADR5 = fbi->dma5_pal->fdadr;
++              udelay(1);
++              FDADR5 = fbi->dma5_frame->fdadr;
++              udelay(1);
++
++      }
++      else {
++              FBR5 = fbi->dma5_pal->fdadr | 0x1;
++              udelay(1);
++              FBR5 = fbi->dma5_frame->fdadr | 0x1;
++              udelay(1);
++      }
++
++      CCR = CCR_CEN | (fbi->ypos << 15) | (fbi->xpos << 5) | (fbi->format);
++
++      fbi->state = C_ENABLE;
++
++      return 0;
++}
++
++static int cursorfb_disable(struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*)info;
++      int done, ret = 0;
++
++      fbi->state = C_DISABLE;
++
++      done = WAIT_FOR_LCD_INTR(LCSR1, LCSR1_BS5, 100);
++      if (!done) ret = -1;
++
++      CCR &= ~CCR_CEN;
++
++      return ret;
++}
++
++static int cursorfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
++                     u_int trans, struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info *)info;
++      u_int val, ret = 1;
++      u_int *pal=(u_int*) fbi->palette_cpu;
++
++      /* 25bit with Transparcy for 16bpp format */
++      if (regno < fbi->palette_size) {
++              val = ((trans << 24)  & 0x1000000);
++              val |= ((red << 16)  & 0x0ff0000);
++              val |= ((green << 8 ) & 0x000ff00);
++              val |= ((blue << 0) & 0x00000ff);
++
++              pal[regno] = val;
++              ret = 0;
++      }
++      return ret;
++}
++
++int cursorfb_blank(int blank, struct fb_info *info)
++{
++      switch(blank)
++      {
++      case 0:
++              cursorfb_enable(info);
++              break;
++      case 1:
++              cursorfb_disable(info);
++              break;
++      default:
++              /* reserved */
++              break;
++      }
++      return 0;
++}
++
++static int cursorfb_check_var( struct fb_var_screeninfo *var, struct fb_info *info)
++{
++      int xpos, ypos, xres, yres;
++      int mode;
++      struct cursorfb_mode *cursor;
++      struct overlayfb_info *fbi=(struct overlayfb_info*)info;
++
++      mode = var->nonstd & 0x7;
++      xpos = (var->nonstd>>5) & 0x3ff;
++      ypos = (var->nonstd>>15) & 0x3ff;
++
++      if (mode>7 || mode <0 )
++              return -EINVAL;
++
++      cursor = cursorfb_modes + mode;
++
++      xres = cursor->xres;
++      yres = cursor->yres;
++
++      if ( (xpos + xres) > fbi->basefb->fb.var.xres )
++              return -EINVAL;
++
++      if ( (ypos + yres) > fbi->basefb->fb.var.yres )
++              return -EINVAL;
++
++      return 0;
++
++}
++
++static int cursorfb_set_par(struct fb_info *info)
++{
++      struct overlayfb_info *fbi = (struct overlayfb_info*) info;
++      struct fb_var_screeninfo *var = &fbi->fb.var;
++      struct cursorfb_mode *cursor;
++      int mode, xpos, ypos;
++      int err;
++
++      info->flags &= ~FBINFO_MISC_USEREVENT;
++
++      mode = var->nonstd & 0x7;
++      xpos = (var->nonstd>>5) & 0x3ff;
++      ypos = (var->nonstd>>15) & 0x3ff;
++
++      if (mode != fbi->format) {
++              cursor = cursorfb_modes + mode;
++
++              /* update "var" info */
++              fbi->fb.var.xres = cursor->xres;
++              fbi->fb.var.yres = cursor->yres;
++              fbi->fb.var.bits_per_pixel = cursor->bpp;
++
++              /* alloc video memory
++               *
++               * 4k is engouh for 128x128x1 cursor,
++               * - 2k for cursor pixels,
++               * - 2k for palette data, plus 2 dma descriptor
++               */
++              if (!fbi->map_cpu) {
++                      fbi->map_size = PAGE_SIZE;
++                      fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size,
++                                             &fbi->map_dma, GFP_KERNEL );
++                      if (!fbi->map_cpu) return -ENOMEM;
++              }
++
++              cursor = cursorfb_modes + mode;
++
++              /* update overlay & fix "info" */
++              fbi->screen_cpu         = fbi->map_cpu;
++              fbi->palette_cpu        = fbi->map_cpu + (PAGE_SIZE/2);
++              fbi->screen_dma         = fbi->map_dma;
++              fbi->palette_dma        = fbi->map_dma + (PAGE_SIZE/2);
++
++              fbi->format             = mode;
++              fbi->palette_size       = (1<<cursor->bpp);
++              fbi->fb.fix.smem_start  = fbi->screen_dma;
++              fbi->fb.fix.smem_len    = cursor->xres * cursor->yres * cursor->bpp / 8;
++              fbi->fb.fix.line_length = cursor->xres * cursor->bpp / 8;
++
++              fbi->dma5_pal           = (struct pxafb_dma_descriptor*)(fbi->map_cpu + PAGE_SIZE - 16 );
++              fbi->dma5_pal->fdadr    = (fbi->map_dma + PAGE_SIZE - 16);
++              fbi->dma5_pal->fsadr    = fbi->palette_dma;
++              fbi->dma5_pal->fidr     = 0;
++              fbi->dma5_pal->ldcmd    = (fbi->palette_size<<2) | LDCMD_PAL;
++
++              fbi->dma5_frame                 = (struct pxafb_dma_descriptor*)(fbi->map_cpu + PAGE_SIZE - 32 );
++              fbi->dma5_frame->fdadr  = (fbi->map_dma + PAGE_SIZE - 32);
++              fbi->dma5_frame->fsadr  = fbi->screen_dma;
++              fbi->dma5_frame->fidr   = 0;
++              fbi->dma5_frame->ldcmd  = fbi->fb.fix.smem_len;
++
++              /* alloc & set default cmap */
++              err = fb_alloc_cmap(&fbi->fb.cmap, fbi->palette_size, 0);
++              if (err) return err;
++              err = fb_set_cmap(&fbi->fb.cmap, info);
++              if (err) return err;
++      }
++
++      /* update overlay info */
++      if ( (xpos != fbi->xpos) || (ypos != fbi->ypos) ) {
++              fbi->xpos = xpos;
++              fbi->ypos = ypos;
++      }
++
++      cursorfb_enable(info);
++      pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE);
++
++      return 0;
++}
++
++static struct fb_ops cursorfb_ops = {
++      .owner                  = THIS_MODULE,
++      .fb_check_var           = cursorfb_check_var,
++      .fb_set_par             = cursorfb_set_par,
++      .fb_blank               = cursorfb_blank,
++      .fb_fillrect            = cfb_fillrect,
++      .fb_copyarea            = cfb_copyarea,
++      .fb_imageblit           = cfb_imageblit,
++      .fb_setcolreg           = cursorfb_setcolreg,
++};
++
++static struct overlayfb_info * __init overlay1fb_init_fbinfo(void)
++{
++      struct overlayfb_info *fbi;
++
++      fbi = kmalloc(sizeof(struct overlayfb_info) + sizeof(u16) * 16, GFP_KERNEL);
++      if (!fbi)
++              return NULL;
++
++      memset(fbi, 0, sizeof(struct overlayfb_info) );
++
++      fbi->refcount = 0;
++      init_MUTEX(&fbi->mutex);
++
++      strcpy(fbi->fb.fix.id, "overlay1");
++
++      fbi->fb.fix.type                = FB_TYPE_PACKED_PIXELS;
++      fbi->fb.fix.type_aux            = 0;
++      fbi->fb.fix.xpanstep            = 0;
++      fbi->fb.fix.ypanstep            = 0;
++      fbi->fb.fix.ywrapstep           = 0;
++      fbi->fb.fix.accel               = FB_ACCEL_NONE;
++
++      fbi->fb.var.nonstd              = 0;
++      fbi->fb.var.activate            = FB_ACTIVATE_NOW;
++      fbi->fb.var.height              = -1;
++      fbi->fb.var.width               = -1;
++      fbi->fb.var.accel_flags = 0;
++      fbi->fb.var.vmode               = FB_VMODE_NONINTERLACED;
++
++
++      fbi->fb.fbops                   = &overlay1fb_ops;
++      fbi->fb.flags                   = FBINFO_FLAG_DEFAULT;
++      fbi->fb.node                    = -1;
++      fbi->fb.pseudo_palette          = NULL;
++
++      fbi->xpos                       = 0;
++      fbi->ypos                       = 0;
++      fbi->format                     = -1;
++      fbi->state                      = C_DISABLE;
++
++      return fbi;
++}
++
++static struct overlayfb_info * __init overlay2fb_init_fbinfo(void)
++{
++      struct overlayfb_info *fbi;
++
++      fbi = kmalloc(sizeof(struct overlayfb_info) + sizeof(u16) * 16, GFP_KERNEL);
++      if (!fbi)
++              return NULL;
++
++      memset(fbi, 0, sizeof(struct overlayfb_info) );
++
++      fbi->refcount = 0;
++      init_MUTEX(&fbi->mutex);
++
++      strcpy(fbi->fb.fix.id, "overlay2");
++
++      fbi->fb.fix.type                = FB_TYPE_PACKED_PIXELS;
++      fbi->fb.fix.type_aux            = 0;
++      fbi->fb.fix.xpanstep            = 0;
++      fbi->fb.fix.ypanstep            = 0;
++      fbi->fb.fix.ywrapstep           = 0;
++      fbi->fb.fix.accel               = FB_ACCEL_NONE;
++
++      fbi->fb.var.nonstd              = 0;
++      fbi->fb.var.activate            = FB_ACTIVATE_NOW;
++      fbi->fb.var.height              = -1;
++      fbi->fb.var.width               = -1;
++      fbi->fb.var.accel_flags         = 0;
++      fbi->fb.var.vmode               = FB_VMODE_NONINTERLACED;
++
++      fbi->fb.fbops                   = &overlay2fb_ops;
++      fbi->fb.flags                   = FBINFO_FLAG_DEFAULT;
++      fbi->fb.node                    = -1;
++      fbi->fb.pseudo_palette          = NULL;
++
++      fbi->xpos                       = 0;
++      fbi->ypos                       = 0;
++      fbi->format                     = -1;
++      fbi->state                      = C_DISABLE;
++
++      return fbi;
++}
++
++static struct overlayfb_info * __init cursorfb_init_fbinfo(void)
++{
++      struct overlayfb_info *fbi;
++
++      fbi = kmalloc(sizeof(struct overlayfb_info) + sizeof(u16) * 16, GFP_KERNEL);
++      if (!fbi)
++              return NULL;
++
++      memset(fbi, 0, sizeof(struct overlayfb_info) );
++
++      fbi->refcount = 0;
++      init_MUTEX(&fbi->mutex);
++
++      strcpy(fbi->fb.fix.id, "cursor");
++
++      fbi->fb.fix.type                = FB_TYPE_PACKED_PIXELS;
++      fbi->fb.fix.type_aux            = 0;
++      fbi->fb.fix.xpanstep            = 0;
++      fbi->fb.fix.ypanstep            = 0;
++      fbi->fb.fix.ywrapstep           = 0;
++      fbi->fb.fix.accel               = FB_ACCEL_NONE;
++
++      fbi->fb.var.nonstd              = 0;
++      fbi->fb.var.activate            = FB_ACTIVATE_NOW;
++      fbi->fb.var.height              = -1;
++      fbi->fb.var.width               = -1;
++      fbi->fb.var.accel_flags         = 0;
++      fbi->fb.var.vmode               = FB_VMODE_NONINTERLACED;
++
++      fbi->fb.fbops                   = &cursorfb_ops;
++      fbi->fb.flags                   = FBINFO_FLAG_DEFAULT;
++      fbi->fb.node                    = -1;
++      fbi->fb.pseudo_palette          = NULL;
++
++
++      fbi->xpos                       = 0;
++      fbi->ypos                       = 0;
++      fbi->format                     = -1;
++      fbi->state                      = C_DISABLE;
++
++      return fbi;
++}
++
++
++void pxa_set_overlay_ctrlr_state(struct pxafb_info *fbi, u_int state)
++{
++      switch (state) {
++      case C_DISABLE:
++                      DISABLE_OVERLAYS(fbi);
++                      break;
++      case C_ENABLE:
++                      ENABLE_OVERLAYS(fbi);
++                      break;
++      case C_BLANK:
++                      BLANK_OVERLAYS(fbi);
++                      break;
++      case C_UNBLANK:
++                      UNBLANK_OVERLAYS(fbi);
++                      break;
++      default:
++                      break;
++      }
++}
++
++static int is_pxafb_device(struct device * dev, void * data)
++{
++      struct platform_device *pdev = container_of(dev, struct platform_device, dev);
++
++      return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
++}
++
++static int __devinit pxafb_overlay_init(void)
++{
++      int ret;
++      struct overlayfb_info *overlay1fb, *overlay2fb, *cursorfb;
++      struct pxafb_info *fbi;
++      struct device *dev;
++
++      ret = -1;
++      overlay1fb = overlay2fb = cursorfb = NULL;
++      fbi = NULL;
++
++      dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
++      if (!dev) {
++              printk(KERN_INFO "Base framebuffer not exists, failed to load overlay driver!\n");
++              return ret;
++      }
++
++      fbi = dev_get_drvdata(dev);
++      if (fbi == NULL) {
++              printk(KERN_INFO "Base framebuffer not initialized, failed to load overlay driver!\n");
++              return ret;
++      }
++
++      /* Overlay 1 windows */
++      overlay1fb = overlay1fb_init_fbinfo();
++
++      if (!overlay1fb) {
++              ret = -ENOMEM;
++              printk("overlay1fb_init_fbinfo failed\n");
++              goto failed;
++      }
++
++      ret = register_framebuffer(&overlay1fb->fb);
++      if (ret < 0)
++              goto failed;
++
++      /* Overlay 2 window */
++      overlay2fb = overlay2fb_init_fbinfo();
++
++      if (!overlay2fb) {
++              ret = -ENOMEM;
++              printk("overlay2fb_init_fbinfo failed\n");
++              goto failed;
++      }
++
++      ret = register_framebuffer(&overlay2fb->fb);
++      if (ret < 0) goto failed;
++
++      /* Hardware cursor window */
++      cursorfb = cursorfb_init_fbinfo();
++
++      if (!cursorfb) {
++              ret = -ENOMEM;
++              printk("cursorfb_init_fbinfo failed\n");
++              goto failed;
++      }
++
++      ret = register_framebuffer(&cursorfb->fb);
++      if (ret < 0) goto failed;
++
++
++      /* set refernce to Overlays  */
++      fbi->overlay1fb  = overlay1fb;
++      fbi->overlay2fb  = overlay2fb;
++      fbi->cursorfb    = cursorfb;
++      fbi->set_overlay_ctrlr_state=pxa_set_overlay_ctrlr_state;
++
++      /* set refernce to BaseFrame */
++      overlay1fb->basefb = fbi;
++      overlay2fb->basefb = fbi;
++      cursorfb->basefb = fbi;
++
++      printk(KERN_INFO "Load PXA Overlay driver successfully!\n");
++
++      return 0;
++
++failed:
++      if (overlay1fb)
++              kfree(overlay1fb);
++      if (overlay2fb)
++              kfree(overlay2fb);
++      if (cursorfb)
++              kfree(cursorfb);
++      printk(KERN_INFO "Load PXA Overlay driver failed!\n");
++      return ret;
++}
++
++static void __exit pxafb_overlay_exit(void)
++{
++      struct pxafb_info *fbi;
++      struct device *dev;
++
++      dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
++      if (!dev)
++              return;
++
++      fbi = dev_get_drvdata(dev);
++      if (!fbi)
++              return;
++
++      if (fbi->overlay1fb) {
++              unregister_framebuffer(&(fbi->overlay1fb->fb));
++              kfree(fbi->overlay1fb);
++              fbi->overlay1fb  = NULL;
++      }
++
++      if (fbi->overlay2fb) {
++              unregister_framebuffer(&(fbi->overlay2fb->fb));
++              kfree(fbi->overlay2fb);
++              fbi->overlay2fb  = NULL;
++      }
++
++      if (fbi->cursorfb) {
++              unregister_framebuffer(&(fbi->cursorfb->fb));
++              kfree(fbi->cursorfb);
++              fbi->cursorfb  = NULL;
++      }
++
++      fbi->set_overlay_ctrlr_state = NULL;
++
++      printk(KERN_INFO "Unload PXA Overlay driver successfully!\n");
++      return;
++}
++
++
++module_init(pxafb_overlay_init);
++module_exit(pxafb_overlay_exit);
++
++MODULE_DESCRIPTION("Loadable framebuffer overlay driver for PXA");
++MODULE_LICENSE("GPL");
++
+Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-pxa/pxa-regs.h
++++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h
+@@ -792,11 +792,18 @@
+ #define UDC_INT_PACKETCMP  (0x1)
+ 
+ #define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
++/* Older defines, do not use. */
+ #define UDCICR1_IECC  (1 << 31)       /* IntEn - Configuration Change */
+ #define UDCICR1_IESOF (1 << 30)       /* IntEn - Start of Frame */
+ #define UDCICR1_IERU  (1 << 29)       /* IntEn - Resume */
+ #define UDCICR1_IESU  (1 << 28)       /* IntEn - Suspend */
+ #define UDCICR1_IERS  (1 << 27)       /* IntEn - Reset */
++/* New defines. */
++#define UDCISR1_IRCC  (1 << 31)       /* IntEn - Configuration Change */
++#define UDCISR1_IRSOF (1 << 30)       /* IntEn - Start of Frame */
++#define UDCISR1_IRRU  (1 << 29)       /* IntEn - Resume */
++#define UDCISR1_IRSU  (1 << 28)       /* IntEn - Suspend */
++#define UDCISR1_IRRS  (1 << 27)       /* IntEn - Reset */
+ 
+ #define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
+ #define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+@@ -1831,6 +1838,8 @@
+ #define DFBR0         __REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
+ #define DFBR1         __REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
+ #define LCSR          __REG(0x44000038)  /* LCD Controller Status Register */
++#define LCSR0         __REG(0x44000038)  /* LCD Controller Status Register */
++#define LCSR1         __REG(0x44000034)  /* LCD Controller Status Register */
+ #define LIIDR         __REG(0x4400003C)  /* LCD Controller Interrupt ID Register */
+ #define TMEDRGBR      __REG(0x44000040)  /* TMED RGB Seed Register */
+ #define TMEDCR                __REG(0x44000044)  /* TMED Control Register */
+@@ -1840,6 +1849,10 @@
+ #define LCCR3_4BPP (2 << 24)
+ #define LCCR3_8BPP (3 << 24)
+ #define LCCR3_16BPP (4 << 24)
++#define LCCR3_18BPP (6 << 24)
++#define LCCR3_19BPP (8 << 24)
++#define LCCR3_24BPP (9 << 24)
++#define LCCR3_25BPP (10<< 24)
+ 
+ #define LCCR3_PDFOR_0 (0 << 30)
+ #define LCCR3_PDFOR_1 (1 << 30)
+@@ -2014,6 +2027,104 @@
+ 
+ #define LDCMD_PAL     (1 << 26)       /* instructs DMA to load palette buffer */
+ 
++/* Overlay1 & Overlay2 & Hardware Cursor */
++#define LCSR1_SOF1    (1 << 0)
++#define LCSR1_SOF2    (1 << 1)
++#define LCSR1_SOF3    (1 << 2)
++#define LCSR1_SOF4    (1 << 3)
++#define LCSR1_SOF5    (1 << 4)
++#define LCSR1_SOF6    (1 << 5)
++
++#define LCSR1_EOF1    (1 << 8)
++#define LCSR1_EOF2    (1 << 9)
++#define LCSR1_EOF3    (1 << 10)
++#define LCSR1_EOF4    (1 << 11)
++#define LCSR1_EOF5    (1 << 12)
++#define LCSR1_EOF6    (1 << 13)
++
++#define LCSR1_BS1     (1 << 16)
++#define LCSR1_BS2     (1 << 17)
++#define LCSR1_BS3     (1 << 18)
++#define LCSR1_BS4     (1 << 19)
++#define LCSR1_BS5     (1 << 20)
++#define LCSR1_BS6     (1 << 21)
++
++#define LCSR1_IU2     (1 << 25)
++#define LCSR1_IU3     (1 << 26)
++#define LCSR1_IU4     (1 << 27)
++#define LCSR1_IU5     (1 << 28)
++#define LCSR1_IU6     (1 << 29)
++
++#define LDCMD_SOFINT  (1 << 22)
++#define LDCMD_EOFINT  (1 << 21)
++
++
++#define LCCR5_SOFM1   (1<<0)          /* Start Of Frame Mask for Overlay 1 (channel 1) */
++#define LCCR5_SOFM2   (1<<1)          /* Start Of Frame Mask for Overlay 2 (channel 2) */
++#define LCCR5_SOFM3   (1<<2)          /* Start Of Frame Mask for Overlay 2 (channel 3) */
++#define LCCR5_SOFM4   (1<<3)          /* Start Of Frame Mask for Overlay 2 (channel 4) */
++#define LCCR5_SOFM5   (1<<4)          /* Start Of Frame Mask for cursor (channel 5) */
++#define LCCR5_SOFM6   (1<<5)          /* Start Of Frame Mask for command data (channel 6) */
++
++#define LCCR5_EOFM1   (1<<8)          /* End Of Frame Mask for Overlay 1 (channel 1) */
++#define LCCR5_EOFM2   (1<<9)          /* End Of Frame Mask for Overlay 2 (channel 2) */
++#define LCCR5_EOFM3   (1<<10)         /* End Of Frame Mask for Overlay 2 (channel 3) */
++#define LCCR5_EOFM4   (1<<11)         /* End Of Frame Mask for Overlay 2 (channel 4) */
++#define LCCR5_EOFM5   (1<<12)         /* End Of Frame Mask for cursor (channel 5) */
++#define LCCR5_EOFM6   (1<<13)         /* End Of Frame Mask for command data (channel 6) */
++
++#define LCCR5_BSM1    (1<<16)         /* Branch mask for Overlay 1 (channel 1) */
++#define LCCR5_BSM2    (1<<17)         /* Branch mask for Overlay 2 (channel 2) */
++#define LCCR5_BSM3    (1<<18)         /* Branch mask for Overlay 2 (channel 3) */
++#define LCCR5_BSM4    (1<<19)         /* Branch mask for Overlay 2 (channel 4) */
++#define LCCR5_BSM5    (1<<20)         /* Branch mask for cursor (channel 5) */
++#define LCCR5_BSM6    (1<<21)         /* Branch mask for data command  (channel 6) */
++
++#define LCCR5_IUM1    (1<<24)         /* Input FIFO Underrun Mask for Overlay 1  */
++#define LCCR5_IUM2    (1<<25)         /* Input FIFO Underrun Mask for Overlay 2  */
++#define LCCR5_IUM3    (1<<26)         /* Input FIFO Underrun Mask for Overlay 2  */
++#define LCCR5_IUM4    (1<<27)         /* Input FIFO Underrun Mask for Overlay 2  */
++#define LCCR5_IUM5    (1<<28)         /* Input FIFO Underrun Mask for cursor */
++#define LCCR5_IUM6    (1<<29)         /* Input FIFO Underrun Mask for data command */
++
++#define OVL1C1_O1EN   (1<<31)         /* Enable bit for Overlay 1 */
++#define OVL2C1_O2EN   (1<<31)         /* Enable bit for Overlay 2 */
++#define CCR_CEN               (1<<31)         /* Enable bit for Cursor */
++
++/* LCD registers */
++#define LCCR4         __REG(0x44000010)  /* LCD Controller Control Register 4 */
++#define LCCR5         __REG(0x44000014)  /* LCD Controller Control Register 5 */
++#define FBR0          __REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
++#define FBR1          __REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
++#define FBR2          __REG(0x44000028)  /* DMA Channel 2 Frame Branch Register */
++#define FBR3          __REG(0x4400002C)  /* DMA Channel 3 Frame Branch Register */
++#define FBR4          __REG(0x44000030)  /* DMA Channel 4 Frame Branch Register */
++#define FDADR2                __REG(0x44000220)  /* DMA Channel 2 Frame Descriptor Address Register */
++#define FSADR2                __REG(0x44000224)  /* DMA Channel 2 Frame Source Address Register */
++#define FIDR2         __REG(0x44000228)  /* DMA Channel 2 Frame ID Register */
++#define LDCMD2                __REG(0x4400022C)  /* DMA Channel 2 Command Register */
++#define FDADR3                __REG(0x44000230)  /* DMA Channel 3 Frame Descriptor Address Register */
++#define FSADR3                __REG(0x44000234)  /* DMA Channel 3 Frame Source Address Register */
++#define FIDR3         __REG(0x44000238)  /* DMA Channel 3 Frame ID Register */
++#define LDCMD3                __REG(0x4400023C)  /* DMA Channel 3 Command Register */
++#define FDADR4                __REG(0x44000240)  /* DMA Channel 4 Frame Descriptor Address Register */
++#define FSADR4                __REG(0x44000244)  /* DMA Channel 4 Frame Source Address Register */
++#define FIDR4         __REG(0x44000248)  /* DMA Channel 4 Frame ID Register */
++#define LDCMD4                __REG(0x4400024C)  /* DMA Channel 4 Command Register */
++#define FDADR5                __REG(0x44000250)  /* DMA Channel 5 Frame Descriptor Address Register */
++#define FSADR5                __REG(0x44000254)  /* DMA Channel 5 Frame Source Address Register */
++#define FIDR5         __REG(0x44000258)  /* DMA Channel 5 Frame ID Register */
++#define LDCMD5                __REG(0x4400025C)  /* DMA Channel 5 Command Register */
++
++#define OVL1C1                __REG(0x44000050)  /* Overlay 1 Control Register 1 */
++#define OVL1C2                __REG(0x44000060)  /* Overlay 1 Control Register 2 */
++#define OVL2C1                __REG(0x44000070)  /* Overlay 2 Control Register 1 */
++#define OVL2C2                __REG(0x44000080)  /* Overlay 2 Control Register 2 */
++#define CCR           __REG(0x44000090)  /* Cursor Control Register */
++
++#define FBR5          __REG(0x44000110)  /* DMA Channel 5 Frame Branch Register */
++#define FBR6          __REG(0x44000114)  /* DMA Channel 6 Frame Branch Register */
++
+ /*
+  * Memory controller
+  */

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pxav4l1-8.patch.eml b/packages/linux/linux-ezx-2.6.24/patches/pxav4l1-8.patch.eml
new file mode 100644 (file)
index 0000000..eabcc41
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pxav4l1-8.patch.eml
@@ -0,0 +1,1204 @@
+Path: news.gmane.org!not-for-mail
+From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+Newsgroups: gmane.comp.video.video4linux
+Subject: [RFC PATCH 1/8] soc_camera V4L2 driver for directly-connected
+ SoC-based cameras
+Date: Wed, 23 Jan 2008 18:41:18 +0100 (CET)
+Lines: 1132
+Approved: news@gmane.org
+Message-ID: <Pine.LNX.4.64.0801231654540.4932@axis700.grange>
+References: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+NNTP-Posting-Host: lo.gmane.org
+Mime-Version: 1.0
+Content-Type: TEXT/PLAIN; charset=US-ASCII
+X-Trace: ger.gmane.org 1201110130 28779 80.91.229.12 (23 Jan 2008 17:42:10 GMT)
+X-Complaints-To: usenet@ger.gmane.org
+NNTP-Posting-Date: Wed, 23 Jan 2008 17:42:10 +0000 (UTC)
+To: video4linux-list@redhat.com
+Original-X-From: video4linux-list-bounces@redhat.com Wed Jan 23 18:42:28 2008
+Return-path: <video4linux-list-bounces@redhat.com>
+Envelope-to: rh-video4linux-list@gmane.org
+Original-Received: from hormel.redhat.com ([209.132.177.30])
+       by lo.gmane.org with esmtp (Exim 4.50)
+       id 1JHjbz-0002oq-Us
+       for rh-video4linux-list@gmane.org; Wed, 23 Jan 2008 18:42:09 +0100
+Original-Received: from listman.util.phx.redhat.com (listman.util.phx.redhat.com [10.8.4.110])
+       by hormel.redhat.com (Postfix) with ESMTP
+       id 7B895730A6; Wed, 23 Jan 2008 12:41:41 -0500 (EST)
+Original-Received: from int-mx1.corp.redhat.com (int-mx1.corp.redhat.com
+       [172.16.52.254])
+       by listman.util.phx.redhat.com (8.13.1/8.13.1) with ESMTP id
+       m0NHfdRS017082 for <video4linux-list@listman.util.phx.redhat.com>;
+       Wed, 23 Jan 2008 12:41:39 -0500
+Original-Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32])
+       by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m0NHfcrF027810
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:41:38 -0500
+Original-Received: from mail.gmx.net (mail.gmx.net [213.165.64.20])
+       by mx3.redhat.com (8.13.1/8.13.1) with SMTP id m0NHf62e000540
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:41:06 -0500
+Original-Received: (qmail invoked by alias); 23 Jan 2008 17:40:59 -0000
+Original-Received: from p57BD2F1F.dip0.t-ipconnect.de (EHLO axis700.grange)
+       [87.189.47.31]
+       by mail.gmx.net (mp048) with SMTP; 23 Jan 2008 18:40:59 +0100
+X-Authenticated: #20450766
+X-Provags-ID: V01U2FsdGVkX19NlXt5RoZNpQ4LqFuDqiXHZ3kHYCmxz52UMExHFC
+       yqWM+gBlp24/e9
+Original-Received: from lyakh (helo=localhost)
+       by axis700.grange with local-esmtp (Exim 4.63)
+       (envelope-from <g.liakhovetski@gmx.de>) id 1JHjbC-00029n-Kf
+       for video4linux-list@redhat.com; Wed, 23 Jan 2008 18:41:18 +0100
+X-X-Sender: lyakh@axis700.grange
+In-Reply-To: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+X-Y-GMX-Trusted: 0
+X-RedHat-Spam-Score: 0 
+X-Scanned-By: MIMEDefang 2.58 on 172.16.52.254
+X-Scanned-By: MIMEDefang 2.58 on 172.16.48.32
+X-loop: video4linux-list@redhat.com
+X-BeenThere: video4linux-list@redhat.com
+X-Mailman-Version: 2.1.5
+Precedence: junk
+List-Id: Linux and Kernel Video <video4linux-list.redhat.com>
+List-Unsubscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>, 
+       <mailto:video4linux-list-request@redhat.com?subject=unsubscribe>
+List-Archive: <https://www.redhat.com/mailman/private/video4linux-list>
+List-Post: <mailto:video4linux-list@redhat.com>
+List-Help: <mailto:video4linux-list-request@redhat.com?subject=help>
+List-Subscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>,
+       <mailto:video4linux-list-request@redhat.com?subject=subscribe>
+Original-Sender: video4linux-list-bounces@redhat.com
+Errors-To: video4linux-list-bounces@redhat.com
+Xref: news.gmane.org gmane.comp.video.video4linux:36470
+Archived-At: <http://permalink.gmane.org/gmane.comp.video.video4linux/36470>
+
+This driver provides an interface between platform-specific camera
+busses and camera devices. It should be used if the camera is connected
+not over a "proper" bus like PCI or USB, but over a special bus, like,
+for example, the Quick Capture interface on PXA270 SoCs. Later it should
+also be used for i.MX31 SoCs from Freescale.  It can handle multiple
+cameras and / or multiple busses, which can be used, e.g., in
+stereo-vision applications.
+
+Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+---
+ drivers/media/video/Kconfig      |    8 +
+ drivers/media/video/Makefile     |    2 +
+ drivers/media/video/soc_camera.c |  928 ++++++++++++++++++++++++++++++++++++++
+ include/media/soc_camera.h       |  138 ++++++
+ 4 files changed, 1076 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/media/video/soc_camera.c
+ create mode 100644 include/media/soc_camera.h
+
+diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
+index e204e7b..be54183 100644
+--- a/drivers/media/video/Kconfig
++++ b/drivers/media/video/Kconfig
+@@ -795,4 +795,12 @@ config USB_ZR364XX
+ 
+ endif # V4L_USB_DRIVERS
+ 
++config SOC_CAMERA
++      tristate "SoC camera support"
++      depends on VIDEO_V4L2
++      help
++        SoC Camera is a common API to several cameras, not connecting
++        over a bus like PCI or USB. For example some i2c camera hanging
++        directly on the data bus of an SoC.
++
+ endif # VIDEO_CAPTURE_DRIVERS
+diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
+index 10b4d44..97a9135 100644
+--- a/drivers/media/video/Makefile
++++ b/drivers/media/video/Makefile
+@@ -116,4 +116,6 @@ obj-$(CONFIG_USB_QUICKCAM_MESSENGER)       += usbvideo/
+ 
+ obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+ 
++obj-$(CONFIG_SOC_CAMERA)      += soc_camera.o
++
+ EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
+new file mode 100644
+index 0000000..5ec652e
+--- /dev/null
++++ b/drivers/media/video/soc_camera.c
+@@ -0,0 +1,928 @@
++/*
++ * camera image capture (abstract) bus driver
++ *
++ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
++ *
++ * This driver provides an interface between platform-specific camera
++ * busses and camera devices. It should be used if the camera is
++ * connected not over a "proper" bus like PCI or USB, but over a
++ * special bus, like, for example, the Quick Capture interface on PXA270
++ * SoCs. Later it should also be used for i.MX31 SoCs from Freescale.
++ * It can handle multiple cameras and / or multiple busses, which can
++ * be used, e.g., in stereo-vision applications.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/list.h>
++#include <linux/err.h>
++#include <linux/mutex.h>
++#include <linux/vmalloc.h>
++
++#include <media/v4l2-common.h>
++#include <media/v4l2-dev.h>
++#include <media/soc_camera.h>
++
++static LIST_HEAD(hosts);
++static LIST_HEAD(devices);
++static DEFINE_MUTEX(list_lock);
++static DEFINE_MUTEX(video_lock);
++
++const static struct soc_camera_data_format*
++format_by_fourcc(struct soc_camera_device *icd, unsigned int fourcc)
++{
++      unsigned int i;
++
++      for (i = 0; i < icd->ops->num_formats; i++)
++              if (icd->ops->formats[i].fourcc == fourcc)
++                      return icd->ops->formats + i;
++      return NULL;
++}
++
++static int soc_camera_try_fmt_cap(struct file *file, void *priv,
++                            struct v4l2_format *f)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++      enum v4l2_field field;
++      const struct soc_camera_data_format *fmt;
++      int ret;
++
++      WARN_ON(priv != file->private_data);
++
++      fmt = format_by_fourcc(icd, f->fmt.pix.pixelformat);
++      if (!fmt) {
++              pr_debug("%s: invalid format 0x%08x\n", __FUNCTION__,
++                       f->fmt.pix.pixelformat);
++              return -EINVAL;
++      }
++
++      pr_debug("%s: fmt: 0x%08x\n", __FUNCTION__, fmt->fourcc);
++
++      field = f->fmt.pix.field;
++
++      if (field == V4L2_FIELD_ANY) {
++              field = V4L2_FIELD_NONE;
++      } else if (V4L2_FIELD_NONE != field) {
++              printk("Field type invalid.\n");
++              return -EINVAL;
++      }
++
++      /* limit to host capabilities */
++      ret = ici->try_fmt_cap(ici, f);
++
++      /* limit to sensor capabilities */
++      if (!ret)
++              ret = icd->ops->try_fmt_cap(icd, f);
++
++      /* calculate missing fields */
++      f->fmt.pix.field = field;
++      f->fmt.pix.bytesperline =
++              (f->fmt.pix.width * fmt->depth) >> 3;
++      f->fmt.pix.sizeimage =
++              f->fmt.pix.height * f->fmt.pix.bytesperline;
++
++      return ret;
++}
++
++static int soc_camera_enum_input(struct file *file, void *priv,
++                            struct v4l2_input *inp)
++{
++      if (inp->index != 0)
++              return -EINVAL;
++
++      inp->type = V4L2_INPUT_TYPE_CAMERA;
++      inp->std = V4L2_STD_UNKNOWN;
++      strcpy(inp->name, "Camera");
++
++      return 0;
++}
++
++static int soc_camera_g_input(struct file *file, void *priv, unsigned int *i)
++{
++      *i = 0;
++
++      return 0;
++}
++
++static int soc_camera_s_input(struct file *file, void *priv, unsigned int i)
++{
++      if (i > 0)
++              return -EINVAL;
++
++      return 0;
++}
++
++static int soc_camera_s_std(struct file *file, void *priv, v4l2_std_id *a)
++{
++      return 0;
++}
++
++static int soc_camera_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p)
++{
++      int ret;
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++
++      WARN_ON(priv != file->private_data);
++
++      pr_debug("%s: %d\n", __FUNCTION__, p->memory);
++
++      ret = videobuf_reqbufs(&icf->vb_vidq, p);
++      if (ret < 0)
++              return ret;
++
++      return ici->reqbufs(icf, p);
++
++      return ret;
++}
++
++static int soc_camera_querybuf(struct file *file, void *priv, struct v4l2_buffer *p)
++{
++      struct soc_camera_file *icf = file->private_data;
++
++      WARN_ON(priv != file->private_data);
++
++      return videobuf_querybuf(&icf->vb_vidq, p);
++}
++
++static int soc_camera_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
++{
++      struct soc_camera_file *icf = file->private_data;
++
++      WARN_ON(priv != file->private_data);
++
++      return videobuf_qbuf(&icf->vb_vidq, p);
++}
++
++static int soc_camera_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
++{
++      struct soc_camera_file *icf = file->private_data;
++
++      WARN_ON(priv != file->private_data);
++
++      return videobuf_dqbuf(&icf->vb_vidq, p, file->f_flags & O_NONBLOCK);
++}
++
++static int soc_camera_open(struct inode *inode, struct file *file)
++{
++      struct soc_camera_host *ici;
++      struct soc_camera_device *icd;
++      struct video_device *vdev;
++      struct soc_camera_file *icf;
++      int ret;
++
++      mutex_lock(&video_lock);
++      list_for_each_entry(icd, &devices, list) {
++              if (icd->vdev && icd->vdev->minor == iminor(inode))
++                      break;
++      }
++      mutex_unlock(&video_lock);
++
++      if (&icd->list == &devices)
++              return -ENODEV;
++
++      icf = vmalloc(sizeof(*icf));
++      if (!icf)
++              return -ENOMEM;
++
++      icf->icd = icd;
++
++      if (!try_module_get(icd->ops->owner)) {
++              printk(KERN_INFO "Couldn't lock sensor driver.\n");
++              ret = -EINVAL;
++              goto emgd;
++      }
++
++      ici = to_soc_camera_host(icd->dev.parent);
++
++      if (!try_module_get(ici->owner)) {
++              printk(KERN_INFO "Couldn't lock capture bus driver.\n");
++              ret = -EINVAL;
++              goto emgi;
++      }
++
++      vdev = icd->vdev;
++
++      file->private_data = icf;
++      dev_dbg(vdev->dev, "camera device open\n");
++
++      vdev = icd->vdev;
++
++      videobuf_queue_init(&icf->vb_vidq, ici->vbq_ops,
++                      icd, NULL,
++                      V4L2_BUF_TYPE_VIDEO_CAPTURE,
++                      V4L2_FIELD_NONE,
++                      ici->msize, icd);
++
++      return 0;
++
++emgi:
++      module_put(icd->ops->owner);
++emgd:
++      vfree(icf);
++      return ret;
++}
++
++static int soc_camera_close(struct inode *inode, struct file *file)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++      struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
++      struct video_device *vdev = icd->vdev;
++
++      module_put(icd->ops->owner);
++      module_put(ici->owner);
++      vfree(file->private_data);
++
++      dev_dbg(vdev->dev, "camera device close\n");
++
++      return 0;
++}
++
++static int soc_camera_read(struct file *file, char __user *buf,
++                             size_t count, loff_t *ppos)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++      struct video_device *vdev = icd->vdev;
++      int err = -EINVAL;
++
++      dev_err(vdev->dev, "camera device read not implemented\n");
++
++      return err;
++}
++
++static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma)
++{
++      struct soc_camera_file *icf = file->private_data;
++      int err;
++
++      pr_debug("mmap called, vma=0x%08lx\n",(unsigned long)vma);
++
++      err = videobuf_mmap_mapper(&icf->vb_vidq, vma);
++
++      pr_debug ("vma start=0x%08lx, size=%ld, ret=%d\n",
++              (unsigned long)vma->vm_start,
++              (unsigned long)vma->vm_end-(unsigned long)vma->vm_start,
++              err);
++
++      return err;
++}
++
++static unsigned int soc_camera_poll(struct file *file, poll_table *pt)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++
++      if (list_empty(&icf->vb_vidq.stream)) {
++              printk("----------       urgs\n");
++              return POLLERR;
++      }
++
++      return ici->poll(file, pt);
++}
++
++
++static struct file_operations soc_camera_fops = {
++      .owner          = THIS_MODULE,
++      .open           = soc_camera_open,
++      .release        = soc_camera_close,
++      .ioctl          = video_ioctl2,
++      .read           = soc_camera_read,
++      .mmap           = soc_camera_mmap,
++      .poll           = soc_camera_poll,
++      .llseek         = no_llseek,
++};
++
++
++static int soc_camera_s_fmt_cap(struct file *file, void *priv,
++                                 struct v4l2_format *f)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++      int ret;
++      struct v4l2_rect rect;
++      const static struct soc_camera_data_format *data_fmt;
++
++      WARN_ON(priv != file->private_data);
++
++      data_fmt = format_by_fourcc(icd, f->fmt.pix.pixelformat);
++      if (!data_fmt)
++              return -EINVAL;
++
++      /* cached_datawidth may be further adjusted by the ici */
++      icd->cached_datawidth = data_fmt->depth;
++
++      ret = soc_camera_try_fmt_cap(file, icf, f);
++      if (ret < 0)
++              return ret;
++
++      rect.left       = icd->x_current;
++      rect.top        = icd->y_current;
++      rect.width      = f->fmt.pix.width;
++      rect.height     = f->fmt.pix.height;
++      ret = ici->set_capture_format(icd, f->fmt.pix.pixelformat, &rect);
++
++      if (!ret) {
++              icd->current_fmt        = data_fmt;
++              icd->width              = rect.width;
++              icd->height             = rect.height;
++              icf->vb_vidq.field      = f->fmt.pix.field;
++              if (V4L2_BUF_TYPE_VIDEO_CAPTURE != f->type)
++                      printk("Attention! Wrong buf-type %d\n", f->type);
++
++              dev_dbg(&icd->dev, "set width: %d height: %d\n",
++                     icd->width, icd->height);
++      }
++
++      return ret;
++}
++
++static int soc_camera_enum_fmt_cap(struct file *file, void  *priv,
++                                    struct v4l2_fmtdesc *f)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++      const struct soc_camera_data_format *format;
++
++      WARN_ON(priv != file->private_data);
++
++      if (f->index >= icd->ops->num_formats)
++              return -EINVAL;
++
++      format = &icd->ops->formats[f->index];
++
++      strlcpy(f->description, format->name, sizeof(f->description));
++      f->pixelformat = format->fourcc;
++      return 0;
++}
++
++static int soc_camera_g_fmt_cap(struct file *file, void *priv,
++                                 struct v4l2_format *f)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++
++      WARN_ON(priv != file->private_data);
++
++      f->fmt.pix.width        = icd->width;
++      f->fmt.pix.height       = icd->height;
++      f->fmt.pix.field        = icf->vb_vidq.field;
++      f->fmt.pix.pixelformat  = icd->current_fmt->fourcc;
++      f->fmt.pix.bytesperline =
++              (f->fmt.pix.width * icd->current_fmt->depth) >> 3;
++      f->fmt.pix.sizeimage    =
++              f->fmt.pix.height * f->fmt.pix.bytesperline;
++      printk("%s: current_fmt->fourcc: 0x%08x\n",
++             __FUNCTION__, icd->current_fmt->fourcc);
++      return 0;
++}
++
++static int soc_camera_querycap(struct file *file, void  *priv,
++                                struct v4l2_capability *cap)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++
++      WARN_ON(priv != file->private_data);
++
++      strlcpy(cap->driver, ici->drv_name, sizeof(cap->driver));
++      return ici->querycap(ici, cap);
++}
++
++static int soc_camera_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++//    struct vivi_dev *dev    = fh->dev;
++
++      WARN_ON(priv != file->private_data);
++
++      pr_debug("%s\n",__FUNCTION__);
++
++      if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++              return -EINVAL;
++
++//    if (!res_get(dev,fh))
++//            return -EBUSY;
++//    CIFR = CIFR_RESET_F | CIFR_FEN0;
++
++      icd->ops->start_capture(icd);
++
++      /* This calls buf_queue from host driver's videobuf_queue_ops */
++      return videobuf_streamon(&icf->vb_vidq);
++}
++
++static int soc_camera_streamoff(struct file *file, void *priv,
++                                 enum v4l2_buf_type i)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++//    struct vivi_dev *dev    = fh->dev;
++
++      WARN_ON(priv != file->private_data);
++
++      pr_debug("%s\n",__FUNCTION__);
++
++      if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++              return -EINVAL;
++
++//    CICR0 |= CICR0_DIS;
++//    while(CICR0 & CICR0_ENB);
++
++      /* This calls buf_release from host driver's videobuf_queue_ops for all
++       * remaining buffers. When the last buffer is freed, stop capture */
++      videobuf_streamoff(&icf->vb_vidq);
++
++      icd->ops->stop_capture(icd);
++
++//    res_free(dev,fh);
++
++      return 0;
++}
++
++static int soc_camera_queryctrl(struct file *file, void *priv,
++                                 struct v4l2_queryctrl *qc)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++      int i;
++
++      WARN_ON(priv != file->private_data);
++
++      for (i = 0; i < icd->ops->num_controls; i++)
++              if (qc->id && qc->id == icd->ops->controls[i].id) {
++                      memcpy(qc, &(icd->ops->controls[i]),
++                              sizeof(*qc));
++                      return 0;
++              }
++
++      return -EINVAL;
++}
++
++static int soc_camera_g_ctrl(struct file *file, void *priv,
++                              struct v4l2_control *ctrl)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++
++      WARN_ON(priv != file->private_data);
++
++      switch (ctrl->id) {
++      case V4L2_CID_GAIN:
++              if (icd->gain == (unsigned short)~0)
++                      return -EINVAL;
++              ctrl->value = icd->gain;
++              return 0;
++      case V4L2_CID_EXPOSURE:
++              if (icd->exposure == (unsigned short)~0)
++                      return -EINVAL;
++              ctrl->value = icd->exposure;
++              return 0;
++      }
++
++      if (icd->ops->get_control)
++              return icd->ops->get_control(icd, ctrl);
++      return -EINVAL;
++}
++
++static int soc_camera_s_ctrl(struct file *file, void *priv,
++                              struct v4l2_control *ctrl)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++
++      WARN_ON(priv != file->private_data);
++
++      if (icd->ops->set_control)
++              return icd->ops->set_control(icd, ctrl);
++      return -EINVAL;
++}
++
++static int soc_camera_cropcap(struct file *file, void *fh,
++                                      struct v4l2_cropcap *a)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++
++      a->type                         = V4L2_BUF_TYPE_VIDEO_CAPTURE;
++      a->bounds.left                  = icd->x_min;
++      a->bounds.top                   = icd->y_min;
++      a->bounds.width                 = icd->width_max;
++      a->bounds.height                = icd->height_max;
++      a->defrect.left                 = icd->x_min;
++      a->defrect.top                  = icd->y_min;
++      a->defrect.width                = 640;
++      a->defrect.height               = 480;
++      a->pixelaspect.numerator        = 1;
++      a->pixelaspect.denominator      = 1;
++
++      return 0;
++}
++
++static int soc_camera_g_crop(struct file *file, void *fh,
++                                     struct v4l2_crop *a)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++
++      a->type         = V4L2_BUF_TYPE_VIDEO_CAPTURE;
++      a->c.left       = icd->x_current;
++      a->c.top        = icd->y_current;
++      a->c.width      = icd->width;
++      a->c.height     = icd->height;
++
++      return 0;
++}
++
++static int soc_camera_s_crop(struct file *file, void *fh,
++                                     struct v4l2_crop *a)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct soc_camera_device *icd = icf->icd;
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++      int ret;
++
++      if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
++              return -EINVAL;
++
++      ret = ici->set_capture_format(icd, 0, &a->c);
++      if (!ret) {
++              icd->width      = a->c.width;
++              icd->height     = a->c.height;
++              icd->x_current  = a->c.left;
++              icd->y_current  = a->c.top;
++      }
++
++      return ret;
++}
++
++static int device_register_link(struct soc_camera_device *icd)
++{
++      int ret = device_register(&icd->dev);
++      if (!ret && icd->control)
++              if (sysfs_create_link(&icd->dev.kobj, &icd->control->kobj, "control"))
++                      dev_warn(&icd->dev,
++                               "Couldn't create a symlink to the control device\n");
++      return ret;
++}
++
++/* The two functions below return: 0 if no match found or a match found and
++ * device_register() successful, error code otherwise */
++static int scan_add_host(struct soc_camera_host *ici)
++{
++      struct soc_camera_device *icd;
++      int ret = 0;
++
++      mutex_lock(&list_lock);
++
++      list_for_each_entry(icd, &devices, list) {
++              if (icd->iface == ici->nr) {
++                      ret = 1;
++                      icd->dev.parent = &ici->dev;
++                      break;
++              }
++      }
++
++      mutex_unlock(&list_lock);
++
++      if (ret)
++              ret = device_register_link(icd);
++
++      return ret;
++}
++
++static int scan_add_device(struct soc_camera_device *icd)
++{
++      struct soc_camera_host *ici;
++      int ret = 0;
++
++      mutex_lock(&list_lock);
++
++      list_add_tail(&icd->list, &devices);
++
++      /* Watch out for class_for_each_device / class_find_device API by
++       * Dave Young <hidave.darkstar@gmail.com> */
++      list_for_each_entry(ici, &hosts, list) {
++              if (icd->iface == ici->nr) {
++                      ret = 1;
++                      icd->dev.parent = &ici->dev;
++                      break;
++              }
++      }
++
++      mutex_unlock(&list_lock);
++
++      if (ret)
++              ret = device_register_link(icd);
++
++      return ret;
++}
++
++static int soc_camera_probe(struct device *dev)
++{
++      struct soc_camera_device *icd = to_soc_camera_dev(dev);
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++      int ret;
++
++      if (!icd->probe)
++              return -ENODEV;
++
++      if (!(ret = ici->add(icd)))
++              ret = icd->probe(icd);
++
++      if (!ret) {
++              const struct v4l2_queryctrl *qctrl =
++                      soc_camera_find_qctrl(icd->ops, V4L2_CID_GAIN);
++              icd->gain = qctrl ? qctrl->default_value : (unsigned short)~0;
++              qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
++              icd->exposure = qctrl ? qctrl->default_value : (unsigned short)~0;
++
++      }
++
++      return ret;
++}
++
++/* This is called on device_unregister, which only means we have to disconnect
++ * from the host, but not remove ourselves from the device list */
++static int soc_camera_remove(struct device *dev)
++{
++      struct soc_camera_device *icd = to_soc_camera_dev(dev);
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++
++      if (icd->remove)
++              icd->remove(icd);
++
++      ici->remove(icd);
++
++      return 0;
++}
++
++static struct bus_type soc_camera_bus_type = {
++      .name           = "soc-camera",
++      .probe          = soc_camera_probe,
++      .remove         = soc_camera_remove,
++};
++
++static struct device_driver ic_drv = {
++      .name   = "camera",
++      .bus    = &soc_camera_bus_type,
++      .owner  = THIS_MODULE,
++};
++
++/*
++ * Image capture host - this is a host device, not a bus device, so,
++ * no bus reference, no probing.
++ */
++static struct class soc_camera_host_class = {
++      .owner          = THIS_MODULE,
++      .name           = "camera_host",
++};
++
++static void dummy_release(struct device *dev)
++{
++}
++
++int soc_camera_host_register(struct soc_camera_host *ici, struct module *owner)
++{
++      int ret;
++
++      if (!ici->vbq_ops || !ici->add || !ici->remove || !owner)
++              return -EINVAL;
++
++      /* Number might be equal to the platform device ID,
++       * hopefully, device core will fail nicely if we try
++       * to register a second device with the same bus_id */
++#warning "verify whether device_register will fail, or scan the list yourself for duplicate IDs"
++      sprintf(ici->dev.bus_id, "camera_host%d", ici->nr);
++      ici->dev.class = &soc_camera_host_class;
++
++      mutex_lock(&list_lock);
++      list_add_tail(&ici->list, &hosts);
++      mutex_unlock(&list_lock);
++
++      ici->owner = owner;
++      ici->dev.release = dummy_release;
++
++      ret = device_register(&ici->dev);
++
++      if (ret)
++              goto edevr;
++
++      return scan_add_host(ici);
++
++edevr:
++      mutex_lock(&list_lock);
++      list_del(&ici->list);
++      mutex_unlock(&list_lock);
++
++      return ret;
++}
++EXPORT_SYMBOL(soc_camera_host_register);
++
++/* Unregister all clients! */
++void soc_camera_host_unregister(struct soc_camera_host *ici)
++{
++      struct soc_camera_device *icd;
++
++      mutex_lock(&list_lock);
++
++      list_del(&ici->list);
++
++      list_for_each_entry(icd, &devices, list) {
++              printk("list: %p %p\n", icd->dev.parent, &ici->dev);
++              if (icd->dev.parent == &ici->dev) {
++                      device_unregister(&icd->dev);
++                      /* Not before device_unregister(), .remove
++                       * needs parent to call ici->remove() */
++                      icd->dev.parent = NULL;
++              }
++      }
++
++      mutex_unlock(&list_lock);
++
++      device_unregister(&ici->dev);
++}
++EXPORT_SYMBOL(soc_camera_host_unregister);
++
++/* Image capture device */
++int soc_camera_device_register(struct soc_camera_device *icd)
++{
++      struct soc_camera_device *ix;
++      int num = -1, i;
++
++      if (!icd)
++              return -EINVAL;
++
++      for (i = 0; i < 256 && num < 0; i++) {
++              num = i;
++              list_for_each_entry(ix, &devices, list) {
++                      if (ix->iface == icd->iface && ix->devnum == i) {
++                              num = -1;
++                              break;
++                      }
++              }
++      }
++
++      if (num < 0)
++              /* ok, we have 256 cameras on this host... man, stay reasonable... */
++              return -ENOMEM;
++
++      icd->devnum = num;
++      icd->dev.bus = &soc_camera_bus_type;
++//    icd->dev.driver = &ic_drv;
++      snprintf(icd->dev.bus_id, sizeof(icd->dev.bus_id),
++              "%u-%u", icd->iface, icd->devnum);
++
++      icd->dev.release = dummy_release;
++
++      if (icd->ops->get_datawidth)
++              icd->cached_datawidth = icd->ops->get_datawidth(icd);
++
++      return scan_add_device(icd);
++}
++EXPORT_SYMBOL(soc_camera_device_register);
++
++void soc_camera_device_unregister(struct soc_camera_device *icd)
++{
++      mutex_lock(&list_lock);
++      list_del(&icd->list);
++
++      /* The bus->remove will be eventually called */
++      if (icd->dev.parent)
++              device_unregister(&icd->dev);
++      mutex_unlock(&list_lock);
++}
++EXPORT_SYMBOL(soc_camera_device_unregister);
++
++int soc_camera_video_start(struct soc_camera_device *icd)
++{
++      struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
++      int err = -ENOMEM;
++      struct video_device *vdev;
++
++      if (!icd->dev.parent)
++              return -ENODEV;
++
++      if (!(vdev = video_device_alloc()))
++              goto evidallocd;
++      dev_dbg(&ici->dev, "%s: Allocated video_device %p\n", __FUNCTION__, vdev);
++
++      strlcpy(vdev->name, ici->drv_name, sizeof(vdev->name));
++      /* Maybe better &ici->dev */
++      vdev->dev               = &icd->dev;
++      vdev->type              = VID_TYPE_CAPTURE;
++      vdev->current_norm      = V4L2_STD_UNKNOWN;
++      vdev->fops              = &soc_camera_fops;
++      vdev->release           = video_device_release;
++      vdev->minor             = -1;
++      vdev->tvnorms           = V4L2_STD_UNKNOWN,
++      vdev->vidioc_querycap   = soc_camera_querycap;
++      vdev->vidioc_g_fmt_cap  = soc_camera_g_fmt_cap;
++      vdev->vidioc_enum_fmt_cap = soc_camera_enum_fmt_cap;
++      vdev->vidioc_s_fmt_cap  = soc_camera_s_fmt_cap;
++      vdev->vidioc_enum_input = soc_camera_enum_input;
++      vdev->vidioc_g_input    = soc_camera_g_input;
++      vdev->vidioc_s_input    = soc_camera_s_input;
++      vdev->vidioc_s_std      = soc_camera_s_std;
++      vdev->vidioc_reqbufs    = soc_camera_reqbufs;
++      vdev->vidioc_try_fmt_cap = soc_camera_try_fmt_cap;
++      vdev->vidioc_querybuf   = soc_camera_querybuf;
++      vdev->vidioc_qbuf       = soc_camera_qbuf;
++      vdev->vidioc_dqbuf      = soc_camera_dqbuf;
++      vdev->vidioc_streamon   = soc_camera_streamon;
++      vdev->vidioc_streamoff  = soc_camera_streamoff;
++      vdev->vidioc_queryctrl  = soc_camera_queryctrl;
++      vdev->vidioc_g_ctrl     = soc_camera_g_ctrl;
++      vdev->vidioc_s_ctrl     = soc_camera_s_ctrl;
++      vdev->vidioc_cropcap    = soc_camera_cropcap;
++      vdev->vidioc_g_crop     = soc_camera_g_crop;
++      vdev->vidioc_s_crop     = soc_camera_s_crop;
++
++      icd->current_fmt = &icd->ops->formats[0];
++
++      err = video_register_device(vdev, VFL_TYPE_GRABBER, vdev->minor);
++      if (err < 0) {
++              dev_err(vdev->dev, "%s: video_register_device failed\n", __FUNCTION__);
++              goto evidregd;
++      }
++      icd->vdev = vdev;
++
++      return 0;
++
++evidregd:
++      video_device_release(vdev);
++evidallocd:
++      return err;
++}
++EXPORT_SYMBOL(soc_camera_video_start);
++
++void soc_camera_video_stop(struct soc_camera_device *icd)
++{
++      struct video_device *vdev = icd->vdev;
++
++      dev_dbg(&icd->dev, "%s\n", __FUNCTION__);
++
++      if (!icd->dev.parent || !vdev)
++              return;
++
++      mutex_lock(&video_lock);
++      video_unregister_device(vdev);
++      icd->vdev = NULL;
++      mutex_unlock(&video_lock);
++}
++EXPORT_SYMBOL(soc_camera_video_stop);
++
++static int __init soc_camera_init(void)
++{
++      int ret = bus_register(&soc_camera_bus_type);
++      if (ret)
++              return ret;
++      ret = driver_register(&ic_drv);
++      if (ret)
++              goto edrvr;
++      ret = class_register(&soc_camera_host_class);
++      if (ret)
++              goto eclr;
++
++      return 0;
++
++eclr:
++      driver_unregister(&ic_drv);
++edrvr:
++      bus_unregister(&soc_camera_bus_type);
++      return ret;
++}
++
++static void __exit soc_camera_exit(void)
++{
++      class_unregister(&soc_camera_host_class);
++      driver_unregister(&ic_drv);
++      bus_unregister(&soc_camera_bus_type);
++}
++
++module_init(soc_camera_init);
++module_exit(soc_camera_exit);
++
++MODULE_DESCRIPTION("Image capture bus driver");
++MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
++MODULE_LICENSE("GPL");
+diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
+new file mode 100644
+index 0000000..f416959
+--- /dev/null
++++ b/include/media/soc_camera.h
+@@ -0,0 +1,138 @@
++/*
++ * camera image capture (abstract) bus driver header
++ *
++ * Copyright (C) 2006, Sascha Hauer, Pengutronix
++ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef SOC_CAMERA_H
++#define SOC_CAMERA_H
++
++#include <media/video-buf.h>
++#include <linux/videodev2.h>
++
++struct soc_camera_device {
++      struct list_head list;
++      struct device dev;
++      struct device *control;
++      unsigned short width;           /* Current window */
++      unsigned short height;          /* sizes */
++      unsigned short x_min;           /* Camera capabilities */
++      unsigned short y_min;
++      unsigned short x_current;       /* Current window location */
++      unsigned short y_current;
++      unsigned short width_min;
++      unsigned short width_max;
++      unsigned short height_min;
++      unsigned short height_max;
++      unsigned short y_skip_top;      /* Lines to skip at the top */
++      unsigned short gain;
++      unsigned short exposure;
++      unsigned char iface;            /* Host number */
++      unsigned char devnum;           /* Device number per host */
++      unsigned char cached_datawidth; /* See comment in .c */
++      struct soc_camera_ops *ops;
++      struct video_device *vdev;
++      const struct soc_camera_data_format *current_fmt;
++      int (*probe)(struct soc_camera_device *icd);
++      void (*remove)(struct soc_camera_device *icd);
++      struct module *owner;
++};
++
++struct soc_camera_file {
++      struct soc_camera_device *icd;
++      struct videobuf_queue vb_vidq;
++};
++
++struct soc_camera_host {
++      struct list_head list;
++      struct device dev;
++      unsigned char nr;                               /* Host number */
++      size_t msize;
++      struct videobuf_queue_ops *vbq_ops;
++      struct module *owner;
++      void *priv;
++      char *drv_name;
++      int (*add)(struct soc_camera_device *);
++      void (*remove)(struct soc_camera_device *);
++      int (*set_capture_format)(struct soc_camera_device *, __u32,
++                                struct v4l2_rect *);
++      int (*try_fmt_cap)(struct soc_camera_host *, struct v4l2_format *);
++      int (*reqbufs)(struct soc_camera_file *, struct v4l2_requestbuffers *);
++      int (*querycap)(struct soc_camera_host *, struct v4l2_capability *);
++      unsigned int (*poll)(struct file *, poll_table *);
++};
++
++struct soc_camera_link {
++      int bus_id;
++      struct i2c_client **extender;
++};
++
++static inline struct soc_camera_device *to_soc_camera_dev(struct device *dev)
++{
++      return container_of(dev, struct soc_camera_device, dev);
++}
++
++static inline struct soc_camera_host *to_soc_camera_host(struct device *dev)
++{
++      return container_of(dev, struct soc_camera_host, dev);
++}
++
++extern int soc_camera_host_register(struct soc_camera_host *ici, struct module *owner);
++extern void soc_camera_host_unregister(struct soc_camera_host *ici);
++extern int soc_camera_device_register(struct soc_camera_device *icd);
++extern void soc_camera_device_unregister(struct soc_camera_device *icd);
++
++extern int soc_camera_video_start(struct soc_camera_device *icd);
++extern void soc_camera_video_stop(struct soc_camera_device *icd);
++
++struct soc_camera_data_format {
++      char *name;
++      unsigned int depth;
++      __u32 fourcc;
++      enum v4l2_colorspace colorspace;
++};
++
++struct soc_camera_ops {
++      struct module *owner;
++      int (*init)(struct soc_camera_device *);
++      int (*release)(struct soc_camera_device *);
++      int (*start_capture)(struct soc_camera_device *);
++      int (*stop_capture)(struct soc_camera_device *);
++      int (*set_capture_format)(struct soc_camera_device *, __u32,
++                                struct v4l2_rect *, unsigned int);
++      int (*try_fmt_cap)(struct soc_camera_device *, struct v4l2_format *);
++      const struct soc_camera_data_format *formats;
++      int num_formats;
++      int (*get_control)(struct soc_camera_device *, struct v4l2_control *);
++      int (*set_control)(struct soc_camera_device *, struct v4l2_control *);
++      const struct v4l2_queryctrl *controls;
++      int num_controls;
++      unsigned int(*get_datawidth)(struct soc_camera_device *icd);
++};
++
++static inline struct v4l2_queryctrl const *soc_camera_find_qctrl(
++      struct soc_camera_ops *ops, int id)
++{
++      int i;
++
++      for (i = 0; i < ops->num_controls; i++)
++              if (ops->controls[i].id == id)
++                      return &ops->controls[i];
++
++      return NULL;
++}
++
++#define IS_MASTER             (1<<0)
++#define IS_HSYNC_ACTIVE_HIGH  (1<<1)
++#define IS_VSYNC_ACTIVE_HIGH  (1<<2)
++#define IS_DATAWIDTH_8                (1<<3)
++#define IS_DATAWIDTH_9                (1<<4)
++#define IS_DATAWIDTH_10               (1<<5)
++#define IS_PCLK_SAMPLE_RISING (1<<6)
++
++#endif
+-- 
+1.5.3.4
+
+--
+video4linux-list mailing list
+Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
+https://www.redhat.com/mailman/listinfo/video4linux-list
+

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pxav4l2-8.patch.eml b/packages/linux/linux-ezx-2.6.24/patches/pxav4l2-8.patch.eml
new file mode 100644 (file)
index 0000000..a681d2a
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pxav4l2-8.patch.eml
@@ -0,0 +1,1330 @@
+Path: news.gmane.org!not-for-mail
+From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+Newsgroups: gmane.comp.video.video4linux
+Subject: [RFC PATCH 2/8] V4L2 soc_camera driver for PXA27x processors
+Date: Wed, 23 Jan 2008 18:41:30 +0100 (CET)
+Lines: 1259
+Approved: news@gmane.org
+Message-ID: <Pine.LNX.4.64.0801231816430.4932@axis700.grange>
+References: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+NNTP-Posting-Host: lo.gmane.org
+Mime-Version: 1.0
+Content-Type: TEXT/PLAIN; charset=US-ASCII
+X-Trace: ger.gmane.org 1201110136 28805 80.91.229.12 (23 Jan 2008 17:42:16 GMT)
+X-Complaints-To: usenet@ger.gmane.org
+NNTP-Posting-Date: Wed, 23 Jan 2008 17:42:16 +0000 (UTC)
+To: video4linux-list@redhat.com
+Original-X-From: video4linux-list-bounces@redhat.com Wed Jan 23 18:42:35 2008
+Return-path: <video4linux-list-bounces@redhat.com>
+Envelope-to: rh-video4linux-list@gmane.org
+Original-Received: from hormel.redhat.com ([209.132.177.30])
+       by lo.gmane.org with esmtp (Exim 4.50)
+       id 1JHjc5-0002rt-JS
+       for rh-video4linux-list@gmane.org; Wed, 23 Jan 2008 18:42:14 +0100
+Original-Received: from listman.util.phx.redhat.com (listman.util.phx.redhat.com [10.8.4.110])
+       by hormel.redhat.com (Postfix) with ESMTP
+       id 2A84F730D3; Wed, 23 Jan 2008 12:41:44 -0500 (EST)
+Original-Received: from int-mx1.corp.redhat.com (int-mx1.corp.redhat.com
+       [172.16.52.254])
+       by listman.util.phx.redhat.com (8.13.1/8.13.1) with ESMTP id
+       m0NHffgW017091 for <video4linux-list@listman.util.phx.redhat.com>;
+       Wed, 23 Jan 2008 12:41:41 -0500
+Original-Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32])
+       by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m0NHffAN027831
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:41:41 -0500
+Original-Received: from mail.gmx.net (mail.gmx.net [213.165.64.20])
+       by mx3.redhat.com (8.13.1/8.13.1) with SMTP id m0NHfHEp000673
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:41:18 -0500
+Original-Received: (qmail invoked by alias); 23 Jan 2008 17:41:10 -0000
+Original-Received: from p57BD2F1F.dip0.t-ipconnect.de (EHLO axis700.grange)
+       [87.189.47.31]
+       by mail.gmx.net (mp032) with SMTP; 23 Jan 2008 18:41:10 +0100
+X-Authenticated: #20450766
+X-Provags-ID: V01U2FsdGVkX1+0is8xDaK0Koc8XTQH0vhXxt8dgUbjrW8SVR/i+1
+       dGRci20BqQXyog
+Original-Received: from lyakh (helo=localhost)
+       by axis700.grange with local-esmtp (Exim 4.63)
+       (envelope-from <g.liakhovetski@gmx.de>) id 1JHjbO-00029q-7k
+       for video4linux-list@redhat.com; Wed, 23 Jan 2008 18:41:30 +0100
+X-X-Sender: lyakh@axis700.grange
+In-Reply-To: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+X-Y-GMX-Trusted: 0
+X-RedHat-Spam-Score: 0 
+X-Scanned-By: MIMEDefang 2.58 on 172.16.52.254
+X-Scanned-By: MIMEDefang 2.58 on 172.16.48.32
+X-loop: video4linux-list@redhat.com
+X-BeenThere: video4linux-list@redhat.com
+X-Mailman-Version: 2.1.5
+Precedence: junk
+List-Id: Linux and Kernel Video <video4linux-list.redhat.com>
+List-Unsubscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>, 
+       <mailto:video4linux-list-request@redhat.com?subject=unsubscribe>
+List-Archive: <https://www.redhat.com/mailman/private/video4linux-list>
+List-Post: <mailto:video4linux-list@redhat.com>
+List-Help: <mailto:video4linux-list-request@redhat.com?subject=help>
+List-Subscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>,
+       <mailto:video4linux-list-request@redhat.com?subject=subscribe>
+Original-Sender: video4linux-list-bounces@redhat.com
+Errors-To: video4linux-list-bounces@redhat.com
+Xref: news.gmane.org gmane.comp.video.video4linux:36472
+Archived-At: <http://permalink.gmane.org/gmane.comp.video.video4linux/36472>
+
+This patch adds a driver for the Quick Capture Interface on the PXA270. It 
+is based on the original driver from Intel, but has been re-worked 
+multiple times since then, this time with the V4L2 API support.
+
+Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+---
+ drivers/media/video/Kconfig         |    8 +
+ drivers/media/video/Makefile        |    1 +
+ drivers/media/video/pxa_camera.c    |  895 +++++++++++++++++++++++++++++++++++
+ include/asm-arm/arch-pxa/pxa-regs.h |   94 ++++
+ include/asm-arm/arch-pxa/pxa_cif.h  |   48 ++
+ 5 files changed, 1046 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/media/video/pxa_camera.c
+ create mode 100644 include/asm-arm/arch-pxa/pxa_cif.h
+
+diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
+index be54183..dc0dfec 100644
+--- a/drivers/media/video/Kconfig
++++ b/drivers/media/video/Kconfig
+@@ -803,4 +803,12 @@ config SOC_CAMERA
+         over a bus like PCI or USB. For example some i2c camera hanging
+         directly on the data bus of an SoC.
+ 
++config VIDEO_PXA27X
++      tristate "PXA27x Quick Capture Interface driver"
++      depends on VIDEO_DEV && PXA27x
++      select VIDEO_BUF
++      select SOC_CAMERA
++      ---help---
++        This is a v4l2 driver for the PXA27x Quick Capture Interface
++
+ endif # VIDEO_CAPTURE_DRIVERS
+diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
+index 97a9135..81b7cd6 100644
+--- a/drivers/media/video/Makefile
++++ b/drivers/media/video/Makefile
+@@ -116,6 +116,7 @@ obj-$(CONFIG_USB_QUICKCAM_MESSENGER)       += usbvideo/
+ 
+ obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+ 
++obj-$(CONFIG_VIDEO_PXA27X)    += pxa_camera.o
+ obj-$(CONFIG_SOC_CAMERA)      += soc_camera.o
+ 
+ EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
+new file mode 100644
+index 0000000..78927fb
+--- /dev/null
++++ b/drivers/media/video/pxa_camera.c
+@@ -0,0 +1,895 @@
++/*
++ * V4L2 Driver for PXA camera host
++ *
++ * Copyright (C) 2006, Sascha Hauer, Pengutronix
++ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <asm/io.h>
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/errno.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/moduleparam.h>
++#include <linux/time.h>
++#include <linux/version.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++
++#include <media/v4l2-common.h>
++#include <media/v4l2-dev.h>
++#include <media/soc_camera.h>
++
++#include <linux/videodev.h>
++#include <linux/video_decoder.h>
++
++#include <asm/dma.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/arch/pxa_cif.h>
++
++#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
++#define PXA_CAM_DRV_NAME "pxa2xx-camera"
++
++#define CICR0_IRQ_MASK (CICR0_TOM | CICR0_RDAVM | CICR0_FEM | CICR0_EOLM |    \
++                      CICR0_PERRM | CICR0_QDM | CICR0_CDM | CICR0_SOFM |      \
++                      CICR0_EOFM | CICR0_FOM)
++
++/*
++ * Structures
++ */
++
++/* buffer for one video frame */
++struct pxa_buffer {
++      /* common v4l buffer stuff -- must be first */
++      struct videobuf_buffer vb;
++
++      const struct soc_camera_data_format        *fmt;
++
++      /* our descriptor list needed for the PXA DMA engine */
++      dma_addr_t              sg_dma;
++      struct pxa_dma_desc     *sg_cpu;
++      size_t                  sg_size;
++      int                     inwork;
++};
++
++struct pxa_framebuffer_queue {
++      dma_addr_t              sg_last_dma;
++      struct pxa_dma_desc     *sg_last_cpu;
++};
++
++struct pxa_camera_dev {
++      struct device           *dev;
++
++      unsigned int            irq;
++      void __iomem            *base;
++      unsigned int            dma_chan_y;
++
++      enum v4l2_buf_type      type;
++
++      struct pxacamera_platform_data *pdata;
++      struct resource         *res;
++      unsigned long           platform_flags;
++      unsigned long           platform_mclk_10khz;
++
++      struct list_head        capture;
++
++      spinlock_t              lock;
++
++      int                     dma_running;
++
++      struct pxa_buffer       *active;
++};
++
++static const char *pxa_cam_driver_description = "PXA_Camera";
++
++static unsigned int vid_limit = 16;   /* Video memory limit, in Mb */
++
++/*
++ *  Videobuf operations
++ */
++static int
++pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size)
++{
++      struct soc_camera_device *icd = vq->priv_data;
++
++      pr_debug("%s: count=%d, size=%d\n", __FUNCTION__, *count, *size);
++
++      *size = icd->width * icd->height * ((icd->current_fmt->depth + 7) >> 3);
++
++      if (0 == *count)
++              *count = 32;
++      while (*size * *count > vid_limit * 1024 * 1024)
++              (*count)--;
++
++      return 0;
++}
++
++static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf)
++{
++      struct soc_camera_device *icd = vq->priv_data;
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++      struct pxa_camera_dev *pcdev = ici->priv;
++
++      BUG_ON(in_interrupt());
++
++      pr_debug("%s (vb=0x%p) 0x%08lx %d\n",__FUNCTION__, &buf->vb, buf->vb.baddr, buf->vb.bsize);
++
++      /* This waits until this buffer is out of danger, i.e., until it is no longer
++       * in STATE_QUEUED or STATE_ACTIVE */
++      videobuf_waiton(&buf->vb, 0, 0);
++      videobuf_dma_unmap(vq, &buf->vb.dma);
++      videobuf_dma_free(&buf->vb.dma);
++
++      if (buf->sg_cpu)
++              dma_free_coherent(pcdev->dev, buf->sg_size, buf->sg_cpu, buf->sg_dma);
++      buf->sg_cpu = NULL;
++
++      buf->vb.state = STATE_NEEDS_INIT;
++}
++
++static int
++pxa_videobuf_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
++                                              enum v4l2_field field)
++{
++      struct soc_camera_device *icd = vq->priv_data;
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++      struct pxa_camera_dev *pcdev = ici->priv;
++      struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
++//    unsigned long flags;
++      int i, ret;
++
++      pr_debug("%s (vb=0x%p) 0x%08lx %d\n",__FUNCTION__, vb, vb->baddr, vb->bsize);
++
++      /* Added list head initialization on alloc */
++      WARN_ON(!list_empty(&vb->queue));
++
++#ifdef DEBUG
++      /* This can be useful if you want to see if we actually fill
++       * the buffer with something */
++      memset((void *)vb->baddr, 0xaa, vb->bsize);
++#endif
++
++      BUG_ON(NULL == icd->current_fmt);
++
++      /* I think, in buf_prepare you only have to protect global data,
++       * the actual buffer is yours */
++//    spin_lock_irqsave(&pcdev->lock, flags);
++      buf->inwork = 1;
++
++      if (buf->fmt    != icd->current_fmt ||
++          vb->width   != icd->width ||
++          vb->height  != icd->height ||
++          vb->field   != field) {
++              buf->fmt        = icd->current_fmt;
++              vb->width       = icd->width;
++              vb->height      = icd->height;
++              vb->field       = field;
++              vb->state       = STATE_NEEDS_INIT;
++      }
++
++      vb->size = vb->width * vb->height * ((buf->fmt->depth + 7) >> 3);
++      if (0 != vb->baddr && vb->bsize < vb->size) {
++              ret = -EINVAL;
++              goto out;
++      }
++
++      if (vb->state == STATE_NEEDS_INIT) {
++              unsigned int size = vb->size;
++
++              if (0 != (ret = videobuf_iolock(vq, vb, NULL)))
++                      goto fail;
++
++              if (buf->sg_cpu)
++                      dma_free_coherent(pcdev->dev, buf->sg_size, buf->sg_cpu, buf->sg_dma);
++
++              buf->sg_size = (vb->dma.sglen + 1) * sizeof(struct pxa_dma_desc);
++              buf->sg_cpu = dma_alloc_coherent(pcdev->dev,
++                      buf->sg_size,
++                      &buf->sg_dma, GFP_KERNEL);
++              if (!buf->sg_cpu) {
++                      ret = -ENOMEM;
++                      goto fail;
++              }
++
++              pr_debug("%s nents=%d size: %d sg=0x%p\n", __FUNCTION__, vb->dma.sglen, size, vb->dma.sglist);
++              for (i = 0; i < vb->dma.sglen; i++ ) {
++                      struct scatterlist *sg = vb->dma.sglist;
++                      unsigned int dma_len = sg_dma_len(&sg[i]), xfer_len;
++
++                      BUG_ON(!sg[i].page);
++
++                      sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset;
++
++                      buf->sg_cpu[i].dsadr = pcdev->res->start + 0x28; /* CIBR0 */
++                      buf->sg_cpu[i].dtadr = sg_dma_address(&sg[i]);
++                      /* PXA27x Developer's Manual 27.4.4.1: round up to 8 bytes */
++//                    xfer_len = (min(dma_len, size) + 7) & ~7;
++                      xfer_len = min(dma_len, size);
++                      if (xfer_len & 7)
++                              dev_err(&icd->dev, "Unaligned buffer: dma_len %u, size %u\n",
++                                      dma_len, size);
++                      buf->sg_cpu[i].dcmd = DCMD_FLOWSRC | DCMD_BURST8 | DCMD_INCTRGADDR |
++                              xfer_len;
++                      size -= dma_len;
++                      buf->sg_cpu[i].ddadr = buf->sg_dma + (i + 1) *
++                                      sizeof(struct pxa_dma_desc);
++              }
++              buf->sg_cpu[vb->dma.sglen - 1].ddadr = DDADR_STOP;
++              buf->sg_cpu[vb->dma.sglen - 1].dcmd |= DCMD_ENDIRQEN;
++
++              vb->state = STATE_PREPARED;
++      }
++
++      buf->inwork = 0;
++//    spin_unlock_irqrestore(&pcdev->lock, flags);
++
++      return 0;
++
++fail:
++      free_buffer(vq,buf);
++out:
++      buf->inwork = 0;
++//    spin_unlock_irqrestore(&pcdev->lock, flags);
++      return ret;
++}
++
++static void
++pxa_videobuf_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
++{
++      struct soc_camera_device *icd = vq->priv_data;
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++      struct pxa_camera_dev *pcdev = ici->priv;
++      struct pxa_buffer *buf = container_of(vb,struct pxa_buffer,vb);
++      struct pxa_buffer *active = pcdev->active;
++      int nents = vb->dma.sglen;
++      unsigned long flags;
++
++      pr_debug("%s (vb=0x%p) 0x%08lx %d\n",__FUNCTION__, vb, vb->baddr, vb->bsize);
++      spin_lock_irqsave(&pcdev->lock, flags);
++
++      list_add_tail(&vb->queue, &pcdev->capture);
++
++      vb->state = STATE_ACTIVE;
++
++      if (!pcdev->active) {
++              CIFR |= CIFR_RESET_F;
++              DDADR(pcdev->dma_chan_y) = buf->sg_dma;
++              DCSR(pcdev->dma_chan_y) = DCSR_RUN;
++              pcdev->active = buf;
++              CICR0 |= CICR0_ENB;
++      } else {
++              /* Stop DMA engine */
++              DCSR(pcdev->dma_chan_y) = 0;
++
++              /* Add the descriptors we just initialized to the currently
++               * running chain
++               */
++              pcdev->active->sg_cpu[active->vb.dma.sglen - 1].ddadr = buf->sg_dma;
++
++              /* Setup a dummy descriptor with the DMA engines current
++               * state
++               */
++              buf->sg_cpu[nents].dsadr = pcdev->res->start + 0x28; /* CIBR0 */
++              buf->sg_cpu[nents].dtadr = DTADR(pcdev->dma_chan_y);
++              buf->sg_cpu[nents].dcmd = DCMD(pcdev->dma_chan_y);
++
++              if (DDADR(pcdev->dma_chan_y) == DDADR_STOP) {
++                      /* The DMA engine is on the last descriptor, set the
++                       * next descriptors address to the descriptors
++                       * we just initialized
++                       */
++                      buf->sg_cpu[nents].ddadr = buf->sg_dma;
++              } else {
++                      buf->sg_cpu[nents].ddadr = DDADR(pcdev->dma_chan_y);
++              }
++
++              /* The next descriptor is the dummy descriptor */
++              DDADR(pcdev->dma_chan_y) = buf->sg_dma + nents *
++                      sizeof(struct pxa_dma_desc);
++
++              DCSR(pcdev->dma_chan_y) = DCSR_RUN;
++#if 0
++              if(CISR & CISR_IFO_0) {
++                      printk("%s: fifo ovl. repeat last\n",__FUNCTION__);
++                      DDADR(pcdev->dma_chan_y) = pcdev->active->sg_dma;
++
++                      CICR0 &= ~CICR0_ENB;
++                      CIFR |= CIFR_RESET_F;
++                      DCSR(pcdev->dma_chan_y) = DCSR_RUN;
++                      CICR0 |= CICR0_ENB;
++              } else {
++                      DCSR(pcdev->dma_chan_y) = DCSR_RUN;
++//                    printk("no fifo ovl\n");
++              }
++#endif
++      }
++
++      spin_unlock_irqrestore(&pcdev->lock, flags);
++
++}
++
++static void pxa_videobuf_release(struct videobuf_queue *vq, struct videobuf_buffer *vb)
++{
++      struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
++
++      pr_debug("%s (vb=0x%p) 0x%08lx %d\n",__FUNCTION__,vb, vb->baddr, vb->bsize);
++
++#ifdef DEBUG
++      switch(vb->state) {
++      case STATE_ACTIVE:
++              printk("%s (active)\n",__FUNCTION__);
++              break;
++      case STATE_QUEUED:
++              printk("%s (queued)\n",__FUNCTION__);
++              break;
++      case STATE_PREPARED:
++              printk("%s (prepared)\n",__FUNCTION__);
++              break;
++      default:
++              printk("%s (unknown)\n",__FUNCTION__);
++              break;
++      }
++#endif
++
++      free_buffer(vq, buf);
++}
++
++static int pxa_videobuf_map_sg(void *dev, struct scatterlist *sg, int nents,
++                     int direction)
++{
++      pr_debug("%s, number of pages=%d\n", __FUNCTION__,nents);
++      BUG_ON(direction == DMA_NONE);
++
++      dma_map_sg(dev, sg, nents, DMA_FROM_DEVICE);
++
++      return nents;
++}
++
++static int pxa_videobuf_unmap_sg(void *dev, struct scatterlist *sg, int nents,
++                       int direction)
++{
++      pr_debug("%s\n", __FUNCTION__);
++      dma_unmap_sg(dev, sg, nents, DMA_FROM_DEVICE);
++      return 0;
++}
++
++static int pxa_videobuf_dma_sync_sg(void *dev, struct scatterlist *sg, int nents,
++                          int direction)
++{
++      return 0;
++}
++
++static void pxa_camera_dma_irq_y(int channel, void *data)
++{
++      struct pxa_camera_dev *pcdev = data;
++      struct pxa_buffer *buf;
++      unsigned long flags;
++      unsigned int status;
++      struct videobuf_buffer *vb;
++
++      spin_lock_irqsave(&pcdev->lock, flags);
++
++      status = DCSR(pcdev->dma_chan_y);
++      if (status & DCSR_BUSERR) {
++              printk("%s: Bus Error\n",__FUNCTION__);
++              DCSR(pcdev->dma_chan_y) |= DCSR_BUSERR;
++              goto out;
++      }
++
++      if (!(status & DCSR_ENDINTR)) {
++              printk("%s: unknown dma interrupt source. status: 0x%08x\n",
++                              __FUNCTION__, status);
++              goto out;
++      }
++
++      DCSR(pcdev->dma_chan_y) |= DCSR_ENDINTR;
++
++      if (!pcdev->active) {
++              printk("%s: no active buf\n",__FUNCTION__);
++              goto out;
++      }
++
++      vb = &pcdev->active->vb;
++      buf = container_of(vb, struct pxa_buffer, vb);
++      WARN_ON(buf->inwork || list_empty(&vb->queue));
++      pr_debug("%s (vb=0x%p) 0x%08lx %d\n",__FUNCTION__,vb, vb->baddr, vb->bsize);
++
++      /* _init is used to debug races, see comment in pxa_is_reqbufs() */
++      list_del_init(&vb->queue);
++      vb->state = STATE_DONE;
++      do_gettimeofday(&vb->ts);
++      vb->field_count++;
++      wake_up(&vb->done);
++
++      if (list_empty(&pcdev->capture)) {
++              pcdev->active = NULL;
++              DCSR(pcdev->dma_chan_y) = 0;
++              CICR0 &= ~CICR0_ENB;
++              goto out;
++      }
++
++      pcdev->active = list_entry(pcdev->capture.next, struct pxa_buffer, vb.queue);
++
++out:
++      spin_unlock_irqrestore(&pcdev->lock, flags);
++}
++
++static struct videobuf_queue_ops pxa_video_ops = {
++      .buf_setup      = pxa_videobuf_setup,
++      .buf_prepare    = pxa_videobuf_prepare,
++      .buf_queue      = pxa_videobuf_queue,
++      .buf_release    = pxa_videobuf_release,
++
++      /* Non-pci handling routines */
++      .vb_map_sg      = pxa_videobuf_map_sg,
++      .vb_dma_sync_sg = pxa_videobuf_dma_sync_sg,
++      .vb_unmap_sg    = pxa_videobuf_unmap_sg,
++};
++
++static int mclk_get_divisor(unsigned int mclk_10khz)
++{
++      unsigned long div;
++      unsigned long lcdclk;
++
++      lcdclk = get_lcdclk_frequency_10khz();
++
++      /* We verify platform_mclk_10khz != 0, so this is only against future bugs */
++      if (unlikely(!mclk_10khz))
++              return 0;
++
++      div = (lcdclk + 2 * mclk_10khz - 1) / (2 * mclk_10khz) - 1;
++
++      pr_debug("pxa_camera: LCD clock %lukHz, platform target freq %dkHz, divisor %lu\n",
++               lcdclk * 10, mclk_10khz * 10, div);
++
++      return div;
++}
++
++static void pxa_is_activate(struct pxa_camera_dev *pcdev)
++{
++      struct pxacamera_platform_data *pdata = pcdev->pdata;
++
++      printk("Registered platform device at %p data %p\n", pcdev, pdata);
++
++      if (pdata && pdata->init) {
++              dev_dbg(pcdev->dev, "%s: Init gpios\n", __FUNCTION__);
++              pdata->init(pcdev->dev);
++      }
++
++      if (pdata && pdata->power) {
++              dev_dbg(pcdev->dev, "%s: Power on camera\n", __FUNCTION__);
++              pdata->power(pcdev->dev, 1);
++      }
++
++      if (pdata && pdata->reset) {
++              dev_dbg(pcdev->dev, "%s: Releasing camera reset\n", __FUNCTION__);
++              pdata->reset(pcdev->dev, 1);
++      }
++
++      CICR0 = 0x3FF;   /* disable all interrupts */
++      pxa_set_cken(CKEN_CAMERA, 1);
++}
++
++static void pxa_is_deactivate(struct pxa_camera_dev *pdev)
++{
++      struct pxacamera_platform_data *board = pdev->pdata;
++
++      pxa_set_cken(CKEN_CAMERA, 0);
++/*
++      dev_dbg(&pdev->dev, "%s: Asserting camera reset\n", __FUNCTION__);
++      if (board && board->reset) {
++              board->reset(&pdev->dev, 0);
++      }
++*/
++      dev_dbg(pdev->dev, "%s: Power off camera\n", __FUNCTION__);
++      if (board && board->power)
++              board->power(pdev->dev, 0);
++}
++
++static irqreturn_t pxa_camera_irq(int irq, void *data)
++{
++//    struct pxa_camera_dev *pcdev = (struct pxa_camera_dev *)data;
++//    printk("%s: 0x%08x\n",__FUNCTION__,CISR);
++      unsigned int status = CISR;
++//    if(status & CISR_SOF) printk("Start of frame\n");
++//    if(status & CISR_EOF) printk("End of frame\n");
++//    printk("%s 0x%08x\n",__FUNCTION__,status);
++      CISR = status;
++
++      return IRQ_HANDLED;
++}
++
++/* The following two functions absolutely depend on the fact, that
++ * there can be only one camera on PXA quick capture interface */
++static int pxa_is_add_device(struct soc_camera_device *icd)
++{
++      struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
++      struct pxa_camera_dev *pcdev = ici->priv;
++
++      dev_info(&icd->dev, "PXA Camera driver loaded for host %d\n",
++               icd->iface);
++
++      pxa_is_activate(pcdev);
++//    udelay(200);
++      return icd->ops->init(icd);
++}
++
++static void pxa_is_remove_device(struct soc_camera_device *icd)
++{
++      struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
++      struct pxa_camera_dev *pcdev = ici->priv;
++
++      dev_dbg(pcdev->dev, "%s\n", __FUNCTION__);
++
++      /* disable capture, disable interrupts */
++      CICR0 = 0x3ff;
++      /* Stop DMA engine */
++      DCSR(pcdev->dma_chan_y) = 0;
++
++      icd->ops->release(icd);
++
++      pxa_is_deactivate(pcdev);
++}
++
++static int pxa_is_set_capture_format(struct soc_camera_device *icd,
++                                   __u32 pixfmt, struct v4l2_rect *rect)
++{
++      struct soc_camera_host *ici =
++              to_soc_camera_host(icd->dev.parent);
++      struct pxa_camera_dev *pcdev = ici->priv;
++      unsigned int datawidth = 0, dw, bpp;
++      u32 cicr0, cicr4 = 0;
++      int ret;
++
++      /* If requested data width is supported by the platform, use it */
++      switch (icd->cached_datawidth) {
++      case 10:
++              if (pcdev->platform_flags & PXACIF_DATAWIDTH_10)
++                      datawidth = IS_DATAWIDTH_10;
++              break;
++      case 9:
++              if (pcdev->platform_flags & PXACIF_DATAWIDTH_9)
++                      datawidth = IS_DATAWIDTH_9;
++              break;
++      case 8:
++              if (pcdev->platform_flags & PXACIF_DATAWIDTH_8)
++                      datawidth = IS_DATAWIDTH_8;
++      }
++      if (!datawidth)
++              return -EINVAL;
++
++      ret = icd->ops->set_capture_format(icd, pixfmt, rect,
++                      datawidth |
++                      (pcdev->platform_flags & PXACIF_MASTER ?
++                       IS_MASTER : 0) |
++                      (pcdev->platform_flags & PXACIF_HSP ?
++                       0 : IS_HSYNC_ACTIVE_HIGH) |
++                      (pcdev->platform_flags & PXACIF_VSP ?
++                       0 : IS_VSYNC_ACTIVE_HIGH) |
++                      (pcdev->platform_flags & PXACIF_PCP ?
++                       0 : IS_PCLK_SAMPLE_RISING));
++      if (ret < 0)
++              return ret;
++
++      /* Datawidth is now guaranteed to be equal to one of the three values.
++       * We fix bit-per-pixel equal to data-width... */
++      switch (datawidth) {
++      case IS_DATAWIDTH_10:
++              icd->cached_datawidth = 10;
++              dw = 4;
++              bpp = 0x40;
++              break;
++      case IS_DATAWIDTH_9:
++              icd->cached_datawidth = 9;
++              dw = 3;
++              bpp = 0x20;
++              break;
++      case IS_DATAWIDTH_8:
++              icd->cached_datawidth = 8;
++              dw = 2;
++              bpp = 0;
++      }
++
++      if (pcdev->platform_flags & PXACIF_PCLK_EN)
++              cicr4 |= CICR4_PCLK_EN;
++      if (pcdev->platform_flags & PXACIF_MCLK_EN)
++              cicr4 |= CICR4_MCLK_EN;
++      if (pcdev->platform_flags & PXACIF_PCP)
++              cicr4 |= CICR4_PCP;
++      if (pcdev->platform_flags & PXACIF_HSP)
++              cicr4 |= CICR4_HSP;
++      if (pcdev->platform_flags & PXACIF_VSP)
++              cicr4 |= CICR4_VSP;
++
++      cicr0 = CICR0;
++      if (cicr0 & CICR0_ENB)
++              CICR0 = cicr0 & ~CICR0_ENB;
++      CICR1 = CICR1_PPL_VAL(rect->width - 1) | bpp | dw;
++      CICR2 = 0;
++      CICR3 = CICR3_LPF_VAL(rect->height - 1) |
++              CICR3_BFW_VAL(min((unsigned short)255, icd->y_skip_top));
++      CICR4 = mclk_get_divisor(pcdev->platform_mclk_10khz) | cicr4;
++
++      /* CIF interrupts are not used, only DMA */
++      CICR0 = (pcdev->platform_flags & PXACIF_MASTER ?
++                      0 : (CICR0_SL_CAP_EN | CICR0_SIM_SP)) |
++              CICR0_DMAEN | CICR0_IRQ_MASK | (cicr0 & CICR0_ENB);
++
++      return 0;
++}
++
++static int pxa_is_try_fmt_cap(struct soc_camera_host *ici, struct v4l2_format *f)
++{
++      /* limit to pxa hardware capabilities */
++      if (f->fmt.pix.height < 32)
++              f->fmt.pix.height = 32;
++      if (f->fmt.pix.height > 2048)
++              f->fmt.pix.height = 2048;
++      if (f->fmt.pix.width < 48)
++              f->fmt.pix.width = 48;
++      if (f->fmt.pix.width > 2048)
++              f->fmt.pix.width = 2048;
++      f->fmt.pix.width &= ~0x01;
++
++      return 0;
++}
++
++static int pxa_is_reqbufs(struct soc_camera_file *icf, struct v4l2_requestbuffers *p)
++{
++      int i;
++
++      /* This is for locking debugging only. I removed spinlocks and now I
++       * check whether .prepare is ever called on a linked buffer, or whether
++       * a dma IRQ can occur for an in-work or unlinked buffer. Until now
++       * it hadn't triggered */
++      for (i = 0; i < p->count; i++) {
++              struct pxa_buffer *buf = container_of(icf->vb_vidq.bufs[i],
++                                                    struct pxa_buffer, vb);
++              buf->inwork = 0;
++              INIT_LIST_HEAD(&buf->vb.queue);
++      }
++
++      return 0;
++}
++
++static unsigned int pxa_is_poll(struct file *file, poll_table *pt)
++{
++      struct soc_camera_file *icf = file->private_data;
++      struct pxa_buffer *buf;
++
++      buf = list_entry(icf->vb_vidq.stream.next, struct pxa_buffer, vb.stream);
++
++      poll_wait(file, &buf->vb.done, pt);
++
++      if (buf->vb.state == STATE_DONE ||
++          buf->vb.state == STATE_ERROR)
++              return POLLIN|POLLRDNORM;
++
++      return 0;
++}
++
++static int pxa_is_querycap(struct soc_camera_host *ici,
++                         struct v4l2_capability *cap)
++{
++      /* cap->name is set by the firendly caller:-> */
++      strlcpy(cap->card, pxa_cam_driver_description, sizeof(cap->card));
++      cap->version = PXA_CAM_VERSION_CODE;
++      cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
++
++      return 0;
++}
++
++/* Should beallocated dynamically too, but we have only one. */
++static struct soc_camera_host pxa_soc_camera_host = {
++      .drv_name               = PXA_CAM_DRV_NAME,
++      .vbq_ops                = &pxa_video_ops,
++      .add                    = pxa_is_add_device,
++      .remove                 = pxa_is_remove_device,
++      .msize                  = sizeof(struct pxa_buffer),
++      .set_capture_format     = pxa_is_set_capture_format,
++      .try_fmt_cap            = pxa_is_try_fmt_cap,
++      .reqbufs                = pxa_is_reqbufs,
++      .poll                   = pxa_is_poll,
++      .querycap               = pxa_is_querycap,
++};
++
++static int pxa_camera_probe(struct platform_device *pdev)
++{
++      struct pxa_camera_dev *pcdev;
++      struct resource *res;
++      void __iomem *base;
++      unsigned int irq;
++      int err = 0;
++
++      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++      irq = platform_get_irq(pdev, 0);
++      if (!res || !irq) {
++              err = -ENODEV;
++              goto exit;
++      }
++
++      pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
++      if (!pcdev) {
++              dev_err(&pdev->dev, "%s: Could not allocate pcdev\n", __FUNCTION__);
++              err = -ENOMEM;
++              goto exit;
++      }
++
++      dev_set_drvdata(&pdev->dev, pcdev);
++      pcdev->res = res;
++
++      pcdev->pdata = pdev->dev.platform_data;
++      pcdev->platform_flags = pcdev->pdata->flags;
++      if (! pcdev->platform_flags & (PXACIF_DATAWIDTH_8 | PXACIF_DATAWIDTH_9 |
++                                     PXACIF_DATAWIDTH_10)) {
++              /* Platform hasn't set available data widths. This is bad.
++               * Warn and use a default. */
++              dev_warn(&pdev->dev, "WARNING! Platform hasn't set available "
++                       "data widths, using default 10 bit\n");
++              pcdev->platform_flags |= PXACIF_DATAWIDTH_10;
++      }
++      pcdev->platform_mclk_10khz = pcdev->pdata->mclk_10khz;
++      if (!pcdev->platform_mclk_10khz) {
++              dev_warn(&pdev->dev,
++                       "mclk_10khz == 0! Please, fix your platform data. "
++                       "Using default 20MHz\n");
++              pcdev->platform_mclk_10khz = 2000;
++      }
++
++      INIT_LIST_HEAD(&pcdev->capture);
++      spin_lock_init(&pcdev->lock);
++
++      /*
++       * Request the regions.
++       */
++      if (!request_mem_region(res->start, res->end - res->start + 1, PXA_CAM_DRV_NAME)) {
++              err = -EBUSY;
++              goto exit_kfree;
++      }
++
++      base = ioremap(res->start, res->end - res->start + 1);
++      if (!base) {
++              err = -ENOMEM;
++              goto exit_release;
++      }
++      pcdev->irq = irq;
++      pcdev->base = base;
++      pcdev->dev = &pdev->dev;
++
++      /* request dma */
++      pcdev->dma_chan_y = pxa_request_dma("CI_Y", DMA_PRIO_HIGH, pxa_camera_dma_irq_y, pcdev);
++      if (pcdev->dma_chan_y < 0) {
++              printk(KERN_ERR "Can't request DMA for Y\n");
++              err = -ENOMEM;
++              goto exit_iounmap;
++      }
++      pr_debug("got DMA channel %d\n", pcdev->dma_chan_y);
++
++      DRCMR68 = pcdev->dma_chan_y  | DRCMR_MAPVLD;
++
++      /* request irq */
++      err = request_irq(pcdev->irq, pxa_camera_irq, 0, PXA_CAM_DRV_NAME, pcdev);
++      if (err) {
++              printk ("Camera interrupt register failed \n");
++              goto exit_free_dma;
++      }
++
++      pxa_soc_camera_host.priv                = pcdev;
++      pxa_soc_camera_host.dev.parent  = &pdev->dev;
++      pxa_soc_camera_host.nr          = pdev->id;
++      err = soc_camera_host_register(&pxa_soc_camera_host, THIS_MODULE);
++      if (err)
++              goto exit_free_irq;
++
++      return 0;
++
++ exit_free_irq:
++      free_irq(pcdev->irq, pcdev);
++ exit_free_dma:
++      pxa_free_dma(pcdev->dma_chan_y);
++ exit_iounmap:
++      iounmap(base);
++ exit_release:
++      release_mem_region(res->start, res->end - res->start + 1);
++ exit_kfree:
++      kfree(pcdev);
++ exit:
++      return err;
++}
++
++static int __devexit pxa_camera_remove(struct platform_device *pdev)
++{
++      struct pxa_camera_dev *pcdev = platform_get_drvdata(pdev);
++      struct resource *res;
++
++      pxa_free_dma(pcdev->dma_chan_y);
++      free_irq(pcdev->irq, pcdev);
++
++      soc_camera_host_unregister(&pxa_soc_camera_host);
++
++      iounmap(pcdev->base);
++
++      res = pcdev->res;
++      release_mem_region(res->start, res->end - res->start + 1);
++
++      kfree(pcdev);
++
++      dev_info(&pdev->dev, "%s: PXA Camera driver unloaded\n", __FUNCTION__);
++
++      return 0;
++}
++
++/*
++ * Suspend the Camera Module.
++ */
++static int pxa_camera_suspend(struct platform_device *pdev, pm_message_t level)
++{
++      struct pxa_camera_dev *pcdev = platform_get_drvdata(pdev);
++
++      dev_info(&pdev->dev, "camera suspend\n");
++      disable_irq(pcdev->irq);
++      return 0;
++}
++
++/*
++ * Resume the Camera Module.
++ */
++static int pxa_camera_resume(struct platform_device *pdev)
++{
++      struct pxa_camera_dev *pcdev = platform_get_drvdata(pdev);
++
++      dev_info(&pdev->dev, "camera resume\n");
++      enable_irq(pcdev->irq);
++
++      /*      if (pcdev) {    */ /* FIXME: dev in use? */
++/*            DRCMR68 = pcdev->dma_chan_y  | DRCMR_MAPVLD; */
++/*            DRCMR69 = pcdev->dma_chan_cb | DRCMR_MAPVLD; */
++/*            DRCMR70 = pcdev->dma_chan_cr | DRCMR_MAPVLD; */
++/*    } */
++
++      return 0;
++}
++
++
++static struct platform_driver pxa_camera_driver = {
++      .driver         = {
++              .name   = PXA_CAM_DRV_NAME,
++      },
++      .probe          = pxa_camera_probe,
++      .remove         = __exit_p(pxa_camera_remove),
++      .suspend        = pxa_camera_suspend,
++      .resume         = pxa_camera_resume,
++};
++
++
++static int __devinit pxa_camera_init(void)
++{
++      return platform_driver_register(&pxa_camera_driver);
++}
++
++static void __exit pxa_camera_exit(void)
++{
++      return platform_driver_unregister(&pxa_camera_driver);
++}
++
++module_init(pxa_camera_init);
++module_exit(pxa_camera_exit);
++
++MODULE_DESCRIPTION("PXA27x SoC Camera Host driver");
++MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
++MODULE_LICENSE("GPL");
+diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
+index e68b593..f587c83 100644
+--- a/include/asm-arm/arch-pxa/pxa-regs.h
++++ b/include/asm-arm/arch-pxa/pxa-regs.h
+@@ -1229,19 +1229,26 @@
+ #define GPIO10_RTCCLK         10      /* real time clock (1 Hz) */
+ #define GPIO11_3_6MHz         11      /* 3.6 MHz oscillator out */
+ #define GPIO12_32KHz          12      /* 32 kHz out */
++#define GPIO12_CIF_DD7                12      /* Capture Interface D7 (PXA27x) */
+ #define GPIO13_MBGNT          13      /* memory controller grant */
+ #define GPIO14_MBREQ          14      /* alternate bus master request */
+ #define GPIO15_nCS_1          15      /* chip select 1 */
+ #define GPIO16_PWM0           16      /* PWM0 output */
+ #define GPIO17_PWM1           17      /* PWM1 output */
++#define GPIO17_CIF_DD6                17      /* Capture Interface D6 (PXA27x) */
+ #define GPIO18_RDY            18      /* Ext. Bus Ready */
+ #define GPIO19_DREQ1          19      /* External DMA Request */
+ #define GPIO20_DREQ0          20      /* External DMA Request */
+ #define GPIO23_SCLK           23      /* SSP clock */
++#define GPIO23_CIF_MCLK               23      /* Capture Interface MCLK (PXA27x) */
+ #define GPIO24_SFRM           24      /* SSP Frame */
++#define GPIO24_CIF_FV         24      /* Capture Interface FV (PXA27x) */
+ #define GPIO25_STXD           25      /* SSP transmit */
++#define GPIO25_CIF_LV         25      /* Capture Interface LV (PXA27x) */
+ #define GPIO26_SRXD           26      /* SSP receive */
++#define GPIO26_CIF_PCLK               26      /* Capture Interface PCLK (PXA27x) */
+ #define GPIO27_SEXTCLK                27      /* SSP ext_clk */
++#define GPIO27_CIF_DD0                27      /* Capture Interface D0 (PXA27x) */
+ #define GPIO28_BITCLK         28      /* AC97/I2S bit_clk */
+ #define GPIO29_SDATA_IN               29      /* AC97 Sdata_in0 / I2S Sdata_in */
+ #define GPIO30_SDATA_OUT      30      /* AC97/I2S Sdata_out */
+@@ -1262,28 +1269,40 @@
+ #define GPIO41_FFRTS          41      /* FFUART request to send */
+ #define GPIO42_BTRXD          42      /* BTUART receive data */
+ #define GPIO42_HWRXD          42      /* HWUART receive data */
++#define GPIO42_CIF_MCLK               42      /* Capture interface MCLK (PXA27x) */
+ #define GPIO43_BTTXD          43      /* BTUART transmit data */
+ #define GPIO43_HWTXD          43      /* HWUART transmit data */
++#define GPIO43_CIF_FV         43      /* Capture interface FV (PXA27x) */
+ #define GPIO44_BTCTS          44      /* BTUART clear to send */
+ #define GPIO44_HWCTS          44      /* HWUART clear to send */
++#define GPIO44_CIF_LV         44      /* Capture interface LV (PXA27x) */
+ #define GPIO45_BTRTS          45      /* BTUART request to send */
+ #define GPIO45_HWRTS          45      /* HWUART request to send */
+ #define GPIO45_AC97_SYSCLK    45      /* AC97 System Clock */
++#define GPIO45_CIF_PCLK               45      /* Capture interface PCLK (PXA27x) */
+ #define GPIO46_ICPRXD         46      /* ICP receive data */
+ #define GPIO46_STRXD          46      /* STD_UART receive data */
+ #define GPIO47_ICPTXD         47      /* ICP transmit data */
+ #define GPIO47_STTXD          47      /* STD_UART transmit data */
++#define GPIO47_CIF_DD0                47      /* Capture interface D0 (PXA27x) */
+ #define GPIO48_nPOE           48      /* Output Enable for Card Space */
++#define GPIO48_CIF_DD5                48      /* Capture interface D5 (PXA27x) */
+ #define GPIO49_nPWE           49      /* Write Enable for Card Space */
+ #define GPIO50_nPIOR          50      /* I/O Read for Card Space */
++#define GPIO50_CIF_DD3                50      /* Capture interface D3 (PXA27x) */
+ #define GPIO51_nPIOW          51      /* I/O Write for Card Space */
++#define GPIO51_CIF_DD2                51      /* Capture interface D2 (PXA27x) */
+ #define GPIO52_nPCE_1         52      /* Card Enable for Card Space */
++#define GPIO52_CIF_DD4                52      /* Capture interface D4 (PXA27x) */
+ #define GPIO53_nPCE_2         53      /* Card Enable for Card Space */
+ #define GPIO53_MMCCLK         53      /* MMC Clock */
++#define GPIO53_CIF_MCLK               53      /* Capture interface MCLK (PXA27x) */
+ #define GPIO54_MMCCLK         54      /* MMC Clock */
+ #define GPIO54_pSKTSEL                54      /* Socket Select for Card Space */
+ #define GPIO54_nPCE_2         54      /* Card Enable for Card Space (PXA27x) */
++#define GPIO54_CIF_PCLK               54      /* Capture interface PCLK (PXA27x) */
+ #define GPIO55_nPREG          55      /* Card Address bit 26 */
++#define GPIO55_CIF_DD1                55      /* Capture interface D1 (PXA27x) */
+ #define GPIO56_nPWAIT         56      /* Wait signal for Card Space */
+ #define GPIO57_nIOIS16                57      /* Bus Width select for I/O Card Space */
+ #define GPIO58_LDD_0          58      /* LCD data pin 0 */
+@@ -1318,11 +1337,28 @@
+ #define GPIO79_nCS_3          79      /* chip select 3 */
+ #define GPIO80_nCS_4          80      /* chip select 4 */
+ #define GPIO81_NSCLK          81      /* NSSP clock */
++#define GPIO81_CIF_DD0                81      /* Capture Interface D0 (PXA27x) */
+ #define GPIO82_NSFRM          82      /* NSSP Frame */
++#define GPIO82_CIF_DD5                82      /* Capture Interface D5 (PXA27x) */
+ #define GPIO83_NSTXD          83      /* NSSP transmit */
++#define GPIO83_CIF_DD4                83      /* Capture Interface D4 (PXA27x) */
+ #define GPIO84_NSRXD          84      /* NSSP receive */
++#define GPIO84_CIF_FV         84      /* Capture Interface FV (PXA27x) */
+ #define GPIO85_nPCE_1         85      /* Card Enable for Card Space (PXA27x) */
++#define GPIO85_CIF_LV         85      /* Capture Interface LV (PXA27x) */
++#define GPIO90_CIF_DD4                90      /* Capture Interface DD4 (PXA27x) */
++#define GPIO91_CIF_DD5                91      /* Capture Interface DD5 (PXA27x) */
+ #define GPIO92_MMCDAT0                92      /* MMC DAT0 (PXA27x) */
++#define GPIO93_CIF_DD6                93      /* Capture interface D6 (PXA27x) */
++#define GPIO94_CIF_DD5                94      /* Capture interface D5 (PXA27x) */
++#define GPIO95_CIF_DD4                95      /* Capture interface D4 (PXA27x) */
++#define GPIO98_CIF_DD0                98      /* Capture interface D0 (PXA27x) */
++#define GPIO103_CIF_DD3               103     /* Capture interface D3 (PXA27x) */
++#define GPIO104_CIF_DD2               104     /* Capture interface D2 (PXA27x) */
++#define GPIO105_CIF_DD1               105     /* Capture interface D1 (PXA27x) */
++#define GPIO106_CIF_DD9               106     /* Capture interface D9 (PXA27x) */
++#define GPIO107_CIF_DD8               107     /* Capture interface D8 (PXA27x) */
++#define GPIO108_CIF_DD7               108     /* Capture interface D7 (PXA27x) */
+ #define GPIO102_nPCE_1                102     /* PCMCIA (PXA27x) */
+ #define GPIO109_MMCDAT1               109     /* MMC DAT1 (PXA27x) */
+ #define GPIO110_MMCDAT2               110     /* MMC DAT2 (PXA27x) */
+@@ -1332,6 +1368,9 @@
+ #define GPIO112_MMCCMD                112     /* MMC CMD (PXA27x) */
+ #define GPIO113_I2S_SYSCLK    113     /* I2S System Clock (PXA27x) */
+ #define GPIO113_AC97_RESET_N  113     /* AC97 NRESET on (PXA27x) */
++#define GPIO114_CIF_DD1               114     /* Capture interface D1 (PXA27x) */
++#define GPIO115_CIF_DD3               115     /* Capture interface D3 (PXA27x) */
++#define GPIO116_CIF_DD2               116     /* Capture interface D2 (PXA27x) */
+ 
+ /* GPIO alternate function mode & direction */
+ 
+@@ -1357,19 +1396,26 @@
+ #define GPIO10_RTCCLK_MD      (10 | GPIO_ALT_FN_1_OUT)
+ #define GPIO11_3_6MHz_MD      (11 | GPIO_ALT_FN_1_OUT)
+ #define GPIO12_32KHz_MD               (12 | GPIO_ALT_FN_1_OUT)
++#define GPIO12_CIF_DD7_MD     (12 | GPIO_ALT_FN_2_IN)
+ #define GPIO13_MBGNT_MD               (13 | GPIO_ALT_FN_2_OUT)
+ #define GPIO14_MBREQ_MD               (14 | GPIO_ALT_FN_1_IN)
+ #define GPIO15_nCS_1_MD               (15 | GPIO_ALT_FN_2_OUT)
+ #define GPIO16_PWM0_MD                (16 | GPIO_ALT_FN_2_OUT)
+ #define GPIO17_PWM1_MD                (17 | GPIO_ALT_FN_2_OUT)
++#define GPIO17_CIF_DD6_MD     (17 | GPIO_ALT_FN_2_IN)
+ #define GPIO18_RDY_MD         (18 | GPIO_ALT_FN_1_IN)
+ #define GPIO19_DREQ1_MD               (19 | GPIO_ALT_FN_1_IN)
+ #define GPIO20_DREQ0_MD               (20 | GPIO_ALT_FN_1_IN)
++#define GPIO23_CIF_MCLK_MD    (23 | GPIO_ALT_FN_1_OUT)
+ #define GPIO23_SCLK_MD                (23 | GPIO_ALT_FN_2_OUT)
++#define GPIO24_CIF_FV_MD      (24 | GPIO_ALT_FN_1_OUT)
+ #define GPIO24_SFRM_MD                (24 | GPIO_ALT_FN_2_OUT)
++#define GPIO25_CIF_LV_MD      (25 | GPIO_ALT_FN_1_OUT)
+ #define GPIO25_STXD_MD                (25 | GPIO_ALT_FN_2_OUT)
+ #define GPIO26_SRXD_MD                (26 | GPIO_ALT_FN_1_IN)
++#define GPIO26_CIF_PCLK_MD    (26 | GPIO_ALT_FN_2_IN)
+ #define GPIO27_SEXTCLK_MD     (27 | GPIO_ALT_FN_1_IN)
++#define GPIO27_CIF_DD0_MD     (27 | GPIO_ALT_FN_3_IN)
+ #define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN)
+ #define GPIO28_BITCLK_IN_I2S_MD       (28 | GPIO_ALT_FN_2_IN)
+ #define GPIO28_BITCLK_OUT_I2S_MD      (28 | GPIO_ALT_FN_1_OUT)
+@@ -1394,34 +1440,46 @@
+ #define GPIO40_FFDTR_MD               (40 | GPIO_ALT_FN_2_OUT)
+ #define GPIO41_FFRTS_MD               (41 | GPIO_ALT_FN_2_OUT)
+ #define GPIO42_BTRXD_MD               (42 | GPIO_ALT_FN_1_IN)
++#define GPIO42_CIF_MCLK_MD    (42 | GPIO_ALT_FN_3_OUT)
+ #define GPIO42_HWRXD_MD               (42 | GPIO_ALT_FN_3_IN)
+ #define GPIO43_BTTXD_MD               (43 | GPIO_ALT_FN_2_OUT)
++#define GPIO43_CIF_FV_MD      (43 | GPIO_ALT_FN_3_OUT)
+ #define GPIO43_HWTXD_MD               (43 | GPIO_ALT_FN_3_OUT)
+ #define GPIO44_BTCTS_MD               (44 | GPIO_ALT_FN_1_IN)
+ #define GPIO44_HWCTS_MD               (44 | GPIO_ALT_FN_3_IN)
++#define GPIO44_CIF_LV_MD      (44 | GPIO_ALT_FN_3_OUT)
+ #define GPIO45_BTRTS_MD               (45 | GPIO_ALT_FN_2_OUT)
+ #define GPIO45_HWRTS_MD               (45 | GPIO_ALT_FN_3_OUT)
+ #define GPIO45_SYSCLK_AC97_MD         (45 | GPIO_ALT_FN_1_OUT)
++#define GPIO45_CIF_PCLK_MD    (45 | GPIO_ALT_FN_3_IN)
+ #define GPIO46_ICPRXD_MD      (46 | GPIO_ALT_FN_1_IN)
+ #define GPIO46_STRXD_MD               (46 | GPIO_ALT_FN_2_IN)
+ #define GPIO47_ICPTXD_MD      (47 | GPIO_ALT_FN_2_OUT)
+ #define GPIO47_STTXD_MD               (47 | GPIO_ALT_FN_1_OUT)
++#define GPIO47_CIF_DD0_MD     (47 | GPIO_ALT_FN_1_IN)
+ #define GPIO48_nPOE_MD                (48 | GPIO_ALT_FN_2_OUT)
++#define GPIO48_CIF_DD5_MD     (48 | GPIO_ALT_FN_1_IN)
+ #define GPIO48_HWTXD_MD         (48 | GPIO_ALT_FN_1_OUT)
+ #define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
+ #define GPIO49_HWRXD_MD               (49 | GPIO_ALT_FN_1_IN)
+ #define GPIO49_nPWE_MD                (49 | GPIO_ALT_FN_2_OUT)
+ #define GPIO50_nPIOR_MD               (50 | GPIO_ALT_FN_2_OUT)
++#define GPIO50_CIF_DD3_MD     (50 | GPIO_ALT_FN_1_IN)
+ #define GPIO50_HWCTS_MD         (50 | GPIO_ALT_FN_1_IN)
+ #define GPIO51_HWRTS_MD         (51 | GPIO_ALT_FN_1_OUT)
+ #define GPIO51_nPIOW_MD               (51 | GPIO_ALT_FN_2_OUT)
++#define GPIO51_CIF_DD2_MD     (51 | GPIO_ALT_FN_1_IN)
+ #define GPIO52_nPCE_1_MD      (52 | GPIO_ALT_FN_2_OUT)
++#define GPIO52_CIF_DD4_MD     (52 | GPIO_ALT_FN_1_IN)
+ #define GPIO53_nPCE_2_MD      (53 | GPIO_ALT_FN_2_OUT)
+ #define GPIO53_MMCCLK_MD      (53 | GPIO_ALT_FN_1_OUT)
++#define GPIO53_CIF_MCLK_MD    (53 | GPIO_ALT_FN_2_OUT)
+ #define GPIO54_MMCCLK_MD      (54 | GPIO_ALT_FN_1_OUT)
+ #define GPIO54_nPCE_2_MD      (54 | GPIO_ALT_FN_2_OUT)
+ #define GPIO54_pSKTSEL_MD     (54 | GPIO_ALT_FN_2_OUT)
++#define GPIO54_CIF_PCLK_MD    (54 | GPIO_ALT_FN_3_IN)
+ #define GPIO55_nPREG_MD               (55 | GPIO_ALT_FN_2_OUT)
++#define GPIO55_CIF_DD1_MD     (55 | GPIO_ALT_FN_1_IN)
+ #define GPIO56_nPWAIT_MD      (56 | GPIO_ALT_FN_1_IN)
+ #define GPIO57_nIOIS16_MD     (57 | GPIO_ALT_FN_1_IN)
+ #define GPIO58_LDD_0_MD               (58 | GPIO_ALT_FN_2_OUT)
+@@ -1458,16 +1516,33 @@
+ #define GPIO80_nCS_4_MD               (80 | GPIO_ALT_FN_2_OUT)
+ #define GPIO81_NSSP_CLK_OUT   (81 | GPIO_ALT_FN_1_OUT)
+ #define GPIO81_NSSP_CLK_IN    (81 | GPIO_ALT_FN_1_IN)
++#define GPIO81_CIF_DD0_MD     (81 | GPIO_ALT_FN_2_IN)
+ #define GPIO82_NSSP_FRM_OUT   (82 | GPIO_ALT_FN_1_OUT)
+ #define GPIO82_NSSP_FRM_IN    (82 | GPIO_ALT_FN_1_IN)
++#define GPIO82_CIF_DD5_MD     (82 | GPIO_ALT_FN_3_IN)
+ #define GPIO83_NSSP_TX        (83 | GPIO_ALT_FN_1_OUT)
+ #define GPIO83_NSSP_RX        (83 | GPIO_ALT_FN_2_IN)
++#define GPIO83_CIF_DD4_MD     (83 | GPIO_ALT_FN_3_IN)
+ #define GPIO84_NSSP_TX        (84 | GPIO_ALT_FN_1_OUT)
+ #define GPIO84_NSSP_RX        (84 | GPIO_ALT_FN_2_IN)
++#define GPIO84_CIF_FV_MD      (84 | GPIO_ALT_FN_3_OUT)
+ #define GPIO85_nPCE_1_MD      (85 | GPIO_ALT_FN_1_OUT)
++#define GPIO85_CIF_LV_MD      (85 | GPIO_ALT_FN_3_OUT)
++#define GPIO90_CIF_DD4_MD     (90 | GPIO_ALT_FN_3_IN)
++#define GPIO91_CIF_DD5_MD     (91 | GPIO_ALT_FN_3_IN)
+ #define GPIO92_MMCDAT0_MD     (92 | GPIO_ALT_FN_1_OUT)
++#define GPIO93_CIF_DD6_MD     (93 | GPIO_ALT_FN_2_IN)
++#define GPIO94_CIF_DD5_MD     (94 | GPIO_ALT_FN_2_IN)
++#define GPIO95_CIF_DD4_MD     (95 | GPIO_ALT_FN_2_IN)
++#define GPIO98_CIF_DD0_MD     (98 | GPIO_ALT_FN_2_IN)
+ #define GPIO102_nPCE_1_MD     (102 | GPIO_ALT_FN_1_OUT)
++#define GPIO103_CIF_DD3_MD    (103 | GPIO_ALT_FN_1_IN)
+ #define GPIO104_pSKTSEL_MD    (104 | GPIO_ALT_FN_1_OUT)
++#define GPIO104_CIF_DD2_MD    (104 | GPIO_ALT_FN_1_IN)
++#define GPIO105_CIF_DD1_MD    (105 | GPIO_ALT_FN_1_IN)
++#define GPIO106_CIF_DD9_MD    (106 | GPIO_ALT_FN_1_IN)
++#define GPIO107_CIF_DD8_MD    (107 | GPIO_ALT_FN_1_IN)
++#define GPIO108_CIF_DD7_MD    (108 | GPIO_ALT_FN_1_IN)
+ #define GPIO109_MMCDAT1_MD    (109 | GPIO_ALT_FN_1_OUT)
+ #define GPIO110_MMCDAT2_MD    (110 | GPIO_ALT_FN_1_OUT)
+ #define GPIO110_MMCCS0_MD     (110 | GPIO_ALT_FN_1_OUT)
+@@ -2207,6 +2282,11 @@
+ #define CICR0_ENB     (1 << 28)       /* Camera interface enable */
+ #define CICR0_DIS     (1 << 27)       /* Camera interface disable */
+ #define CICR0_SIM     (0x7 << 24)     /* Sensor interface mode mask */
++#define CICR0_SIM_MP  (0 << 24)
++#define CICR0_SIM_SP  (1 << 24)
++#define CICR0_SIM_MS  (2 << 24)
++#define CICR0_SIM_EP  (3 << 24)
++#define CICR0_SIM_ES  (4 << 24)
+ #define CICR0_TOM     (1 << 9)        /* Time-out mask */
+ #define CICR0_RDAVM   (1 << 8)        /* Receive-data-available mask */
+ #define CICR0_FEM     (1 << 7)        /* FIFO-empty mask */
+@@ -2257,6 +2337,20 @@
+ #define CICR4_FR_RATE (0x7 << 8)      /* Frame rate mask */
+ #define CICR4_DIV     (0xff << 0)     /* Clock divisor mask */
+ 
++#define CICR1_DW_VAL(x)               ((x) & CICR1_DW)                /* Data bus width */
++#define CICR1_PPL_VAL(x)      (((x) << 15) & CICR1_PPL)       /* Pixels per line */
++
++#define CICR2_BLW_VAL(x)      (((x) << 24) & CICR2_BLW)       /* Beginning-of-line pixel clock wait count */
++#define CICR2_ELW_VAL(x)      (((x) << 16) & CICR2_ELW)       /* End-of-line pixel clock wait count */
++#define CICR2_HSW_VAL(x)      (((x) << 10) & CICR2_HSW)       /* Horizontal sync pulse width */
++#define CICR2_BFPW_VAL(x)     (((x) << 3) & CICR2_BFPW)       /* Beginning-of-frame pixel clock wait count */
++#define CICR2_FSW_VAL(x)      (((x) << 0) & CICR2_FSW)        /* Frame stabilization wait count */
++
++#define CICR3_BFW_VAL(x)      (((x) << 24) & CICR3_BFW)       /* Beginning-of-frame line clock wait count  */
++#define CICR3_EFW_VAL(x)      (((x) << 16) & CICR3_EFW)       /* End-of-frame line clock wait count */
++#define CICR3_VSW_VAL(x)      (((x) << 11) & CICR3_VSW)       /* Vertical sync pulse width */
++#define CICR3_LPF_VAL(x)      (((x) << 0) & CICR3_LPF)        /* Lines per frame */
++
+ #define CISR_FTO      (1 << 15)       /* FIFO time-out */
+ #define CISR_RDAV_2   (1 << 14)       /* Channel 2 receive data available */
+ #define CISR_RDAV_1   (1 << 13)       /* Channel 1 receive data available */
+diff --git a/include/asm-arm/arch-pxa/pxa_cif.h b/include/asm-arm/arch-pxa/pxa_cif.h
+new file mode 100644
+index 0000000..ca1e5a2
+--- /dev/null
++++ b/include/asm-arm/arch-pxa/pxa_cif.h
+@@ -0,0 +1,48 @@
++/*
++    pxa_camera - PXA camera driver header file
++
++    Copyright (C) 2003, Intel Corporation
++    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
++
++    This program is free software; you can redistribute it and/or modify
++    it under the terms of the GNU General Public License as published by
++    the Free Software Foundation; either version 2 of the License, or
++    (at your option) any later version.
++
++    This program is distributed in the hope that it will be useful,
++    but WITHOUT ANY WARRANTY; without even the implied warranty of
++    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++    GNU General Public License for more details.
++
++    You should have received a copy of the GNU General Public License
++    along with this program; if not, write to the Free Software
++    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++*/
++
++#ifndef __PXA_CIF_H_
++#define __PXA_CIF_H_
++
++#define PXACIF_MASTER         1
++#define PXACIF_DATAWIDTH_4    2
++#define PXACIF_DATAWIDTH_5    4
++#define PXACIF_DATAWIDTH_8    8
++#define PXACIF_DATAWIDTH_9    0x10
++#define PXACIF_DATAWIDTH_10   0x20
++#define PXACIF_PCLK_EN                0x40
++#define PXACIF_MCLK_EN                0x80
++#define PXACIF_PCP            0x100
++#define PXACIF_HSP            0x200
++#define PXACIF_VSP            0x400
++
++struct pxacamera_platform_data {
++      int (*init)(struct device *);
++      int (*power)(struct device *, int on);
++      int (*reset)(struct device *, int set);
++
++      unsigned long flags;
++      unsigned long mclk_10khz;
++};
++
++extern void pxa_set_cif_info(struct pxacamera_platform_data *info);
++
++#endif /* __PXA_CIF_H_ */
+-- 
+1.5.3.4
+
+--
+video4linux-list mailing list
+Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
+https://www.redhat.com/mailman/listinfo/video4linux-list
+

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pxav4l3-8.patch.eml b/packages/linux/linux-ezx-2.6.24/patches/pxav4l3-8.patch.eml
new file mode 100644 (file)
index 0000000..22abad6
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pxav4l3-8.patch.eml
@@ -0,0 +1,282 @@
+Path: news.gmane.org!not-for-mail
+From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+Newsgroups: gmane.comp.video.video4linux,gmane.linux.drivers.i2c
+Subject: [RFC PATCH 3/8] Philips PCA9536 4 bit I2C GPIO extender driver
+Date: Wed, 23 Jan 2008 18:41:39 +0100 (CET)
+Lines: 210
+Approved: news@gmane.org
+Message-ID: <Pine.LNX.4.64.0801231820060.4932@axis700.grange>
+References: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+NNTP-Posting-Host: lo.gmane.org
+Mime-Version: 1.0
+Content-Type: TEXT/PLAIN; charset=US-ASCII
+X-Trace: ger.gmane.org 1201110131 28782 80.91.229.12 (23 Jan 2008 17:42:11 GMT)
+X-Complaints-To: usenet@ger.gmane.org
+NNTP-Posting-Date: Wed, 23 Jan 2008 17:42:11 +0000 (UTC)
+Cc: i2c@lm-sensors.org
+To: video4linux-list@redhat.com
+Original-X-From: video4linux-list-bounces@redhat.com Wed Jan 23 18:42:30 2008
+Return-path: <video4linux-list-bounces@redhat.com>
+Envelope-to: rh-video4linux-list@gmane.org
+Original-Received: from hormel.redhat.com ([209.132.177.30])
+       by lo.gmane.org with esmtp (Exim 4.50)
+       id 1JHjcK-0002zY-Jd
+       for rh-video4linux-list@gmane.org; Wed, 23 Jan 2008 18:42:29 +0100
+Original-Received: from listman.util.phx.redhat.com (listman.util.phx.redhat.com [10.8.4.110])
+       by hormel.redhat.com (Postfix) with ESMTP
+       id 1D07D72F5C; Wed, 23 Jan 2008 12:42:02 -0500 (EST)
+Original-Received: from int-mx1.corp.redhat.com (int-mx1.corp.redhat.com
+       [172.16.52.254])
+       by listman.util.phx.redhat.com (8.13.1/8.13.1) with ESMTP id
+       m0NHfx7t017217 for <video4linux-list@listman.util.phx.redhat.com>;
+       Wed, 23 Jan 2008 12:41:59 -0500
+Original-Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32])
+       by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m0NHfxW4028112
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:41:59 -0500
+Original-Received: from mail.gmx.net (mail.gmx.net [213.165.64.20])
+       by mx3.redhat.com (8.13.1/8.13.1) with SMTP id m0NHfPdF000786
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:41:25 -0500
+Original-Received: (qmail invoked by alias); 23 Jan 2008 17:41:19 -0000
+Original-Received: from p57BD2F1F.dip0.t-ipconnect.de (EHLO axis700.grange)
+       [87.189.47.31]
+       by mail.gmx.net (mp021) with SMTP; 23 Jan 2008 18:41:19 +0100
+X-Authenticated: #20450766
+X-Provags-ID: V01U2FsdGVkX18gZ14xakQgr3grhg4ys0olRWzKeUW5G+x4WUV9jY
+       iLvi2phxgtwjvM
+Original-Received: from lyakh (helo=localhost)
+       by axis700.grange with local-esmtp (Exim 4.63)
+       (envelope-from <g.liakhovetski@gmx.de>)
+       id 1JHjbX-00029t-5A; Wed, 23 Jan 2008 18:41:39 +0100
+X-X-Sender: lyakh@axis700.grange
+In-Reply-To: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+X-Y-GMX-Trusted: 0
+X-RedHat-Spam-Score: 0 
+X-Scanned-By: MIMEDefang 2.58 on 172.16.52.254
+X-Scanned-By: MIMEDefang 2.58 on 172.16.48.32
+X-loop: video4linux-list@redhat.com
+X-BeenThere: video4linux-list@redhat.com
+X-Mailman-Version: 2.1.5
+Precedence: junk
+List-Id: Linux and Kernel Video <video4linux-list.redhat.com>
+List-Unsubscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>, 
+       <mailto:video4linux-list-request@redhat.com?subject=unsubscribe>
+List-Archive: <https://www.redhat.com/mailman/private/video4linux-list>
+List-Post: <mailto:video4linux-list@redhat.com>
+List-Help: <mailto:video4linux-list-request@redhat.com?subject=help>
+List-Subscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>,
+       <mailto:video4linux-list-request@redhat.com?subject=subscribe>
+Original-Sender: video4linux-list-bounces@redhat.com
+Errors-To: video4linux-list-bounces@redhat.com
+Xref: news.gmane.org gmane.comp.video.video4linux:36471 gmane.linux.drivers.i2c:251
+Archived-At: <http://permalink.gmane.org/gmane.comp.video.video4linux/36471>
+
+This driver will be used by the mt9m001 and the mt9v022 camera drivers,
+that can use a pca9536 to switch between 8 and 10 bit modes.
+
+Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+---
+ drivers/i2c/chips/Kconfig   |   10 +++
+ drivers/i2c/chips/Makefile  |    1 +
+ drivers/i2c/chips/pca9536.c |  153 +++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 164 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/i2c/chips/pca9536.c
+
+diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
+index 2e1c24f..6f492f1 100644
+--- a/drivers/i2c/chips/Kconfig
++++ b/drivers/i2c/chips/Kconfig
+@@ -65,6 +65,16 @@ config SENSORS_PCF8574
+         These devices are hard to detect and rarely found on mainstream
+         hardware.  If unsure, say N.
+ 
++config SENSORS_PCA9536
++      tristate "Philips PCA9536 4-bit I/O port"
++      depends on EXPERIMENTAL
++      help
++        If you say yes here you get support for the Philips PCA9539
++        4-bit I/O port.
++
++        This driver can also be built as a module.  If so, the module
++        will be called pca9536.
++
+ config SENSORS_PCA9539
+       tristate "Philips PCA9539 16-bit I/O port"
+       depends on EXPERIMENTAL
+diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
+index ca924e1..e24c582 100644
+--- a/drivers/i2c/chips/Makefile
++++ b/drivers/i2c/chips/Makefile
+@@ -8,6 +8,7 @@ obj-$(CONFIG_DS1682)           += ds1682.o
+ obj-$(CONFIG_SENSORS_EEPROM)  += eeprom.o
+ obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
+ obj-$(CONFIG_SENSORS_M41T00)  += m41t00.o
++obj-$(CONFIG_SENSORS_PCA9536) += pca9536.o
+ obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
+ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
+ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+diff --git a/drivers/i2c/chips/pca9536.c b/drivers/i2c/chips/pca9536.c
+new file mode 100644
+index 0000000..08e5d8b
+--- /dev/null
++++ b/drivers/i2c/chips/pca9536.c
+@@ -0,0 +1,152 @@
++/*
++ * Driver for PCA9536 I/O Expander
++ *
++ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/videodev.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/hwmon-sysfs.h>
++
++#include <media/v4l2-common.h>
++#include <media/v4l2-chip-ident.h>
++
++#define PCA9536_INPUT 0
++#define PCA9536_OUTPUT 1
++#define PCA9536_INVERT 2
++#define PCA9536_DIRECTION 3
++
++/* following are the sysfs callback functions */
++static ssize_t pca9536_show(struct device *dev, struct device_attribute *attr,
++                          char *buf)
++{
++      struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
++      struct i2c_client *client = to_i2c_client(dev);
++
++      return sprintf(buf, "%d\n", i2c_smbus_read_byte_data(client,
++                                                           psa->index));
++}
++
++static ssize_t pca9536_store(struct device *dev, struct device_attribute *attr,
++                           const char *buf, size_t count)
++{
++      struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
++      struct i2c_client *client = to_i2c_client(dev);
++      unsigned long val = simple_strtoul(buf, NULL, 0);
++
++      if (val > 0xff)
++              return -EINVAL;
++
++      i2c_smbus_write_byte_data(client, psa->index, val);
++      return count;
++}
++
++int pca9536_set_level(struct i2c_client *client, u8 pin, u8 level)
++{
++      s32 data;
++
++      if (pin > 3)
++              return -EINVAL;
++
++      /* Switch to output */
++      data = i2c_smbus_read_byte_data(client, PCA9536_DIRECTION);
++      if (data < 0)
++              return data;
++      data = i2c_smbus_write_byte_data(client, PCA9536_DIRECTION,
++                                       data & ~(1 << pin));
++      if (data < 0)
++              return data;
++
++      /* Set level */
++      data = i2c_smbus_read_byte_data(client, PCA9536_OUTPUT);
++      if (data < 0)
++              return data;
++      if (level)
++              data |= (1 << pin);
++      else
++              data &= ~(1 << pin);
++      data = i2c_smbus_write_byte_data(client, PCA9536_OUTPUT, data);
++
++      return data;
++}
++EXPORT_SYMBOL(pca9536_set_level);
++
++/* Define the device attributes */
++
++#define PCA9536_ENTRY_RO(name, reg) \
++      static SENSOR_DEVICE_ATTR(name, S_IRUGO, pca9536_show, NULL, reg)
++
++#define PCA9536_ENTRY_RW(name, reg) \
++      static SENSOR_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, pca9536_show, \
++                                pca9536_store, reg)
++
++PCA9536_ENTRY_RO(input, PCA9536_INPUT);
++PCA9536_ENTRY_RW(output, PCA9536_OUTPUT);
++PCA9536_ENTRY_RW(invert, PCA9536_INVERT);
++PCA9536_ENTRY_RW(direction, PCA9536_DIRECTION);
++
++static struct attribute *pca9536_attributes[] = {
++      &sensor_dev_attr_input.dev_attr.attr,
++      &sensor_dev_attr_output.dev_attr.attr,
++      &sensor_dev_attr_invert.dev_attr.attr,
++      &sensor_dev_attr_direction.dev_attr.attr,
++      NULL
++};
++
++static struct attribute_group pca9536_defattr_group = {
++      .attrs = pca9536_attributes,
++};
++
++static int pca9536_probe(struct i2c_client *client)
++{
++      struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
++
++      if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
++              pr_debug("%s: I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE\n", __FUNCTION__);
++              return -EIO;
++      }
++
++      if (client->dev.platform_data)
++              /* This chip is going to be used from the kernel */
++              *(struct i2c_client **)client->dev.platform_data = client;
++
++      /* Register sysfs hooks */
++      return sysfs_create_group(&client->dev.kobj,
++                                &pca9536_defattr_group);
++}
++
++static int pca9536_remove(struct i2c_client *client)
++{
++      sysfs_remove_group(&client->dev.kobj, &pca9536_defattr_group);
++      return 0;
++}
++
++static struct i2c_driver pca9536_i2c_driver = {
++      .driver = {
++              .name = "pca9536",
++      },
++      .probe          = pca9536_probe,
++      .remove         = pca9536_remove,
++};
++
++static int __init pca9536_mod_init(void)
++{
++      return i2c_add_driver(&pca9536_i2c_driver);
++}
++
++static void __exit pca9536_mod_exit(void)
++{
++      i2c_del_driver(&pca9536_i2c_driver);
++}
++
++module_init(pca9536_mod_init);
++module_exit(pca9536_mod_exit);
++
++MODULE_DESCRIPTION("PCA9536 driver");
++MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
++MODULE_LICENSE("GPL");
+-- 
+1.5.3.4
+
+--
+video4linux-list mailing list
+Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
+https://www.redhat.com/mailman/listinfo/video4linux-list
+

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pxav4l4-8.patch.eml b/packages/linux/linux-ezx-2.6.24/patches/pxav4l4-8.patch.eml
new file mode 100644 (file)
index 0000000..4ac9b73
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pxav4l4-8.patch.eml
@@ -0,0 +1,781 @@
+Path: news.gmane.org!not-for-mail
+From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+Newsgroups: gmane.comp.video.video4linux
+Subject: [RFC PATCH 4/8] Add support for the MT9M001 camera
+Date: Wed, 23 Jan 2008 18:41:48 +0100 (CET)
+Lines: 710
+Approved: news@gmane.org
+Message-ID: <Pine.LNX.4.64.0801231825190.4932@axis700.grange>
+References: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+NNTP-Posting-Host: lo.gmane.org
+Mime-Version: 1.0
+Content-Type: TEXT/PLAIN; charset=US-ASCII
+X-Trace: ger.gmane.org 1201110157 28881 80.91.229.12 (23 Jan 2008 17:42:37 GMT)
+X-Complaints-To: usenet@ger.gmane.org
+NNTP-Posting-Date: Wed, 23 Jan 2008 17:42:37 +0000 (UTC)
+To: video4linux-list@redhat.com
+Original-X-From: video4linux-list-bounces@redhat.com Wed Jan 23 18:42:56 2008
+Return-path: <video4linux-list-bounces@redhat.com>
+Envelope-to: rh-video4linux-list@gmane.org
+Original-Received: from hormel.redhat.com ([209.132.177.30])
+       by lo.gmane.org with esmtp (Exim 4.50)
+       id 1JHjcT-00035B-5V
+       for rh-video4linux-list@gmane.org; Wed, 23 Jan 2008 18:42:38 +0100
+Original-Received: from listman.util.phx.redhat.com (listman.util.phx.redhat.com [10.8.4.110])
+       by hormel.redhat.com (Postfix) with ESMTP
+       id 9E85472FB4; Wed, 23 Jan 2008 12:42:10 -0500 (EST)
+Original-Received: from int-mx1.corp.redhat.com (int-mx1.corp.redhat.com
+       [172.16.52.254])
+       by listman.util.phx.redhat.com (8.13.1/8.13.1) with ESMTP id
+       m0NHg8l9017245 for <video4linux-list@listman.util.phx.redhat.com>;
+       Wed, 23 Jan 2008 12:42:08 -0500
+Original-Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32])
+       by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m0NHg8vG028189
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:42:08 -0500
+Original-Received: from mail.gmx.net (mail.gmx.net [213.165.64.20])
+       by mx3.redhat.com (8.13.1/8.13.1) with SMTP id m0NHfZHu001044
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:41:35 -0500
+Original-Received: (qmail invoked by alias); 23 Jan 2008 17:41:29 -0000
+Original-Received: from p57BD2F1F.dip0.t-ipconnect.de (EHLO axis700.grange)
+       [87.189.47.31]
+       by mail.gmx.net (mp052) with SMTP; 23 Jan 2008 18:41:29 +0100
+X-Authenticated: #20450766
+X-Provags-ID: V01U2FsdGVkX18JzEdNfKMJtAD7BzHkb2TLaDIMUqlssnktvE95Pt
+       3/al7Wqsw8NYli
+Original-Received: from lyakh (helo=localhost)
+       by axis700.grange with local-esmtp (Exim 4.63)
+       (envelope-from <g.liakhovetski@gmx.de>) id 1JHjbg-00029w-Ku
+       for video4linux-list@redhat.com; Wed, 23 Jan 2008 18:41:48 +0100
+X-X-Sender: lyakh@axis700.grange
+In-Reply-To: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+X-Y-GMX-Trusted: 0
+X-RedHat-Spam-Score: 0 
+X-Scanned-By: MIMEDefang 2.58 on 172.16.52.254
+X-Scanned-By: MIMEDefang 2.58 on 172.16.48.32
+X-loop: video4linux-list@redhat.com
+X-BeenThere: video4linux-list@redhat.com
+X-Mailman-Version: 2.1.5
+Precedence: junk
+List-Id: Linux and Kernel Video <video4linux-list.redhat.com>
+List-Unsubscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>, 
+       <mailto:video4linux-list-request@redhat.com?subject=unsubscribe>
+List-Archive: <https://www.redhat.com/mailman/private/video4linux-list>
+List-Post: <mailto:video4linux-list@redhat.com>
+List-Help: <mailto:video4linux-list-request@redhat.com?subject=help>
+List-Subscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>,
+       <mailto:video4linux-list-request@redhat.com?subject=subscribe>
+Original-Sender: video4linux-list-bounces@redhat.com
+Errors-To: video4linux-list-bounces@redhat.com
+Xref: news.gmane.org gmane.comp.video.video4linux:36473
+Archived-At: <http://permalink.gmane.org/gmane.comp.video.video4linux/36473>
+
+This driver supports Micron MT9M001 monochrome and colour cameras.
+
+Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+---
+ drivers/media/video/Kconfig   |   15 +
+ drivers/media/video/Makefile  |    1 +
+ drivers/media/video/mt9m001.c |  649 +++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 665 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/media/video/mt9m001.c
+
+diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
+index dc0dfec..def5246 100644
+--- a/drivers/media/video/Kconfig
++++ b/drivers/media/video/Kconfig
+@@ -803,6 +803,21 @@ config SOC_CAMERA
+         over a bus like PCI or USB. For example some i2c camera hanging
+         directly on the data bus of an SoC.
+ 
++config SOC_CAMERA_MT9M001
++      tristate "mt9m001 support"
++      depends on SOC_CAMERA
++      select SENSORS_PCA9536 if MT9M001_PCA9536_SWITCH
++      help
++        This driver supports MT9M001 cameras from Micron, monochrome
++        and colour models.
++
++config MT9M001_PCA9536_SWITCH
++      bool "pca9536 datawidth switch for mt9m001"
++      depends on SOC_CAMERA_MT9M001
++      help
++        Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
++        extender to switch between 8 and 10 bit datawidth modes
++
+ config VIDEO_PXA27X
+       tristate "PXA27x Quick Capture Interface driver"
+       depends on VIDEO_DEV && PXA27x
+diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
+index 81b7cd6..c56bfdb 100644
+--- a/drivers/media/video/Makefile
++++ b/drivers/media/video/Makefile
+@@ -118,5 +118,6 @@ obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+ 
+ obj-$(CONFIG_VIDEO_PXA27X)    += pxa_camera.o
+ obj-$(CONFIG_SOC_CAMERA)      += soc_camera.o
++obj-$(CONFIG_SOC_CAMERA_MT9M001)      += mt9m001.o
+ 
+ EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
+new file mode 100644
+index 0000000..dc4cc8f
+--- /dev/null
++++ b/drivers/media/video/mt9m001.c
+@@ -0,0 +1,649 @@
++/*
++ * Driver for MT9M001 CMOS Image Sensor from Micron
++ *
++ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/videodev.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/log2.h>
++
++#include <media/v4l2-common.h>
++#include <media/v4l2-chip-ident.h>
++#include <media/soc_camera.h>
++
++/* mt9m001 i2c address 0x5d
++ * The platform has to define i2c_board_info
++ * and call i2c_register_board_info() */
++
++/* mt9m001 selected register addresses */
++#define MT9M001_CHIP_VERSION          0x00
++#define MT9M001_ROW_START             0x01
++#define MT9M001_COLUMN_START          0x02
++#define MT9M001_WINDOW_HEIGHT         0x03
++#define MT9M001_WINDOW_WIDTH          0x04
++#define MT9M001_HORIZONTAL_BLANKING   0x05
++#define MT9M001_VERTICAL_BLANKING     0x06
++#define MT9M001_OUTPUT_CONTROL                0x07
++#define MT9M001_SHUTTER_WIDTH         0x09
++#define MT9M001_FRAME_RESTART         0x0b
++#define MT9M001_SHUTTER_DELAY         0x0c
++#define MT9M001_RESET                 0x0d
++#define MT9M001_READ_OPTIONS1         0x1e
++#define MT9M001_READ_OPTIONS2         0x20
++#define MT9M001_GLOBAL_GAIN           0x35
++#define MT9M001_CHIP_ENABLE           0xF1
++
++/* must be 32 bit, bitwise coded by reg_to_int and int_to_reg below */
++struct reg_access {
++      u16     value;
++      u8      address;
++      u8      rw;
++} __attribute__ ((packed));
++
++union reg_access_32 {
++      struct reg_access       reg;
++      u32                     ctrl;
++};
++
++enum reg_rw { REG_READ = 0, REG_WRITE = 1, };
++
++/*
++#define reg_to_int(rw, address, value) ({                     \
++      union reg_access_32 u = {.reg = {value, address, rw}};  \
++      u.i32;                                                  \
++})
++*/
++
++/* rw has to be numerically most significant, because
++ * maximum, minimum and value are signed */
++#ifdef __LITTLE_ENDIAN
++#define reg_to_int(rw, address, value) (((value) & 0xffff) | (((address) & 0xff) << 16) | (((rw) & 0x7f) << 24))
++#else
++#define reg_to_int(rw, address, value) ((((value) & 0xffff) << 16) | (((address) & 0xff) << 8) | ((rw) & 0x7f))
++#endif
++
++static const struct soc_camera_data_format mt9m001_colour_formats[]= {
++      {
++              .name           = "RGB Bayer (sRGB)",
++              .depth          = 16,
++              .fourcc         = V4L2_PIX_FMT_SBGGR8,
++              .colorspace     = V4L2_COLORSPACE_SRGB,
++      }
++};
++
++static const struct soc_camera_data_format mt9m001_monochrome_formats[]= {
++      {
++              .name           = "Monochrome 10 bit",
++              .depth          = 10,
++              .fourcc         = V4L2_PIX_FMT_Y16,
++      }, {
++              .name           = "Monochrome 8 bit",
++              .depth          = 8,
++              .fourcc         = V4L2_PIX_FMT_GREY,
++      },
++};
++
++enum mt9m001_model {
++      MT9M001C12ST,
++      MT9M001C12STM
++};
++
++struct mt9m001 {
++      struct i2c_client *client;
++      struct soc_camera_device icd;
++      enum mt9m001_model model;
++      struct i2c_client *data_switch;
++      unsigned char autoexposure;
++      unsigned char datawidth;
++};
++
++static int reg_read(struct soc_camera_device *icd, const u8 reg)
++{
++      struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
++      struct i2c_client *client = mt9m001->client;
++      s32 data = i2c_smbus_read_word_data(client, reg);
++      return data < 0 ? data : swab16(data);
++}
++
++static int reg_write(struct soc_camera_device *icd, const u8 reg,
++                   const u16 data)
++{
++      struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
++      return i2c_smbus_write_word_data(mt9m001->client, reg, swab16(data));
++}
++
++static int reg_set(struct soc_camera_device *icd, const u8 reg,
++                 const u16 data)
++{
++      int ret;
++
++      if ((ret = reg_read(icd, reg)) < 0)
++              return ret;
++      return reg_write(icd, reg, ret | data);
++}
++
++static int reg_clear(struct soc_camera_device *icd, const u8 reg,
++                   const u16 data)
++{
++      int ret;
++
++      if ((ret = reg_read(icd, reg)) < 0)
++              return ret;
++      return reg_write(icd, reg, ret & ~data);
++}
++
++static int mt9m001_init(struct soc_camera_device *icd)
++{
++      int ret;
++
++      /* Disable chip, synchronous option update */
++      dev_dbg(icd->vdev->dev, "%s\n", __FUNCTION__);
++
++      ret = reg_write(icd, MT9M001_RESET, 1);
++      if (ret >= 0)
++              ret = reg_write(icd, MT9M001_RESET, 0);
++      if (ret >= 0)
++              ret = reg_write(icd, MT9M001_OUTPUT_CONTROL, 0);
++
++      return ret >= 0 ? 0 : -EIO;
++}
++
++static int mt9m001_release(struct soc_camera_device *icd)
++{
++      /* Disable the chip */
++      reg_write(icd, MT9M001_OUTPUT_CONTROL, 0);
++      return 0;
++}
++
++static int mt9m001_start_capture(struct soc_camera_device *icd)
++{
++      /* Switch to master "normal" mode */
++      if (reg_write(icd, MT9M001_OUTPUT_CONTROL, 2) < 0)
++              return -EIO;
++      return 0;
++}
++
++static int mt9m001_stop_capture(struct soc_camera_device *icd)
++{
++      /* Stop sensor readout */
++      if (reg_write(icd, MT9M001_OUTPUT_CONTROL, 0) < 0)
++              return -EIO;
++      return 0;
++}
++
++extern int pca9536_set_level(struct i2c_client *client, u8 pin, u8 level);
++
++static int external_bus_switch(struct i2c_client *extender, int go8bit)
++{
++      if (! extender)
++              return -ENODEV;
++
++#ifdef CONFIG_MT9M001_PCA9536_SWITCH
++      return pca9536_set_level(extender, 0, go8bit);
++#else
++      return -ENODEV;
++#endif
++}
++
++static int mt9m001_set_capture_format(struct soc_camera_device *icd, __u32 pixfmt,
++                                    struct v4l2_rect *rect, unsigned int flags)
++{
++      struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
++      unsigned int width_flag = flags & (IS_DATAWIDTH_10 | IS_DATAWIDTH_9 |
++                                         IS_DATAWIDTH_8);
++      int ret;
++      const u16 hblank = 9, vblank = 25;
++
++      /* MT9M001 has all capture_format parameters fixed */
++      if (! (flags & IS_MASTER) ||
++          ! (flags & IS_PCLK_SAMPLE_RISING) ||
++          ! (flags & IS_HSYNC_ACTIVE_HIGH) ||
++          ! (flags & IS_VSYNC_ACTIVE_HIGH)) {
++              return -EINVAL;
++      }
++
++      /* Only one width bit may be set */
++      if (!is_power_of_2(width_flag))
++              return -EINVAL;
++
++      if ((mt9m001->datawidth != 10 && (width_flag == IS_DATAWIDTH_10)) ||
++          (mt9m001->datawidth != 9  && (width_flag == IS_DATAWIDTH_9)) ||
++          (mt9m001->datawidth != 8  && (width_flag == IS_DATAWIDTH_8))) {
++              /* data width switch requested */
++              if (! mt9m001->data_switch)
++                      return -EINVAL;
++
++              /* Well, we actually only can do 10 or 8 bits... */
++              if (width_flag == IS_DATAWIDTH_9)
++                      return -EINVAL;
++              ret = external_bus_switch(mt9m001->data_switch,
++                                        width_flag == IS_DATAWIDTH_8);
++              if (ret < 0)
++                      return ret;
++
++              mt9m001->datawidth = width_flag == IS_DATAWIDTH_8 ? 8 : 10;
++      }
++
++      /* Blanking and start values - default... */
++      ret = reg_write(icd, MT9M001_HORIZONTAL_BLANKING, hblank);
++      if (ret >= 0)
++              ret = reg_write(icd, MT9M001_VERTICAL_BLANKING, vblank);
++
++      /* The caller provides a supported format, as verified per
++       * call to icd->try_fmt_cap() */
++      if (ret >= 0)
++              ret = reg_write(icd, MT9M001_COLUMN_START, rect->left);
++      if (ret >= 0)
++              ret = reg_write(icd, MT9M001_ROW_START, rect->top);
++      if (ret >= 0)
++              ret = reg_write(icd, MT9M001_WINDOW_WIDTH, rect->width - 1);
++      if (ret >= 0)
++              ret = reg_write(icd, MT9M001_WINDOW_HEIGHT, rect->height + icd->y_skip_top - 1);
++      if (ret >= 0 && mt9m001->autoexposure) {
++              ret = reg_write(icd, MT9M001_SHUTTER_WIDTH, rect->height + icd->y_skip_top + vblank);
++              if (ret >= 0) {
++                      const struct v4l2_queryctrl *qctrl =
++                              soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
++                      icd->exposure = (524 + (rect->height + icd->y_skip_top + vblank - 1) *
++                                       (qctrl->maximum - qctrl->minimum)) /
++                              1048 + qctrl->minimum;
++              }
++      }
++
++      return ret < 0 ? ret : 0;
++}
++
++static int mt9m001_try_fmt_cap(struct soc_camera_device *icd,
++                             struct v4l2_format *f)
++{
++      if (f->fmt.pix.height < 32 + icd->y_skip_top)
++              f->fmt.pix.height = 32 + icd->y_skip_top;
++      if (f->fmt.pix.height > 1024 + icd->y_skip_top)
++              f->fmt.pix.height = 1024 + icd->y_skip_top;
++      if (f->fmt.pix.width < 48)
++              f->fmt.pix.width = 48;
++      if (f->fmt.pix.width > 1280)
++              f->fmt.pix.width = 1280;
++      f->fmt.pix.width &= ~0x01; /* has to be even, unsure why was ~3 */
++
++      return 0;
++}
++
++static unsigned int mt9m001_get_datawidth(struct soc_camera_device *icd)
++{
++      struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
++      return mt9m001->datawidth;
++}
++
++const struct v4l2_queryctrl mt9m001_controls[] = {
++      {
++              .id             = V4L2_CID_VFLIP,
++              .type           = V4L2_CTRL_TYPE_BOOLEAN,
++              .name           = "Flip Vertically",
++              .minimum        = 0,
++              .maximum        = 1,
++              .step           = 1,
++              .default_value  = 0,
++      }, {
++              .id             = V4L2_CID_GAIN,
++              .type           = V4L2_CTRL_TYPE_INTEGER,
++              .name           = "Gain",
++              .minimum        = 0,
++              .maximum        = 127,
++              .step           = 1,
++              .default_value  = 64,
++              .flags          = V4L2_CTRL_FLAG_SLIDER,
++      }, {
++              .id             = V4L2_CID_EXPOSURE,
++              .type           = V4L2_CTRL_TYPE_INTEGER,
++              .name           = "Exposure",
++              .minimum        = 1,
++              .maximum        = 255,
++              .step           = 1,
++              .default_value  = 255,
++              .flags          = V4L2_CTRL_FLAG_SLIDER,
++      }, {
++              .id             = V4L2_CID_AUTOEXPOSURE,
++              .type           = V4L2_CTRL_TYPE_BOOLEAN,
++              .name           = "Automatic Exposure",
++              .minimum        = 0,
++              .maximum        = 1,
++              .step           = 1,
++              .default_value  = 1,
++      }, {
++              .id             = V4L2_CID_PRIVATE_BASE,
++              .type           = V4L2_CTRL_TYPE_INTEGER,
++              .name           = "Register access",
++              .minimum        = reg_to_int(REG_READ, 0, 0),
++              .maximum        = reg_to_int(REG_WRITE, 0xff, (1 << 16) - 1),
++              .step           = 1,
++              .default_value  = 1,
++      }
++};
++
++static int mt9m001_get_control(struct soc_camera_device *icd, struct v4l2_control *ctrl);
++static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_control *ctrl);
++
++static struct soc_camera_ops mt9m001_ops = {
++      .owner                  = THIS_MODULE,
++      .init                   = mt9m001_init,
++      .release                = mt9m001_release,
++      .start_capture          = mt9m001_start_capture,
++      .stop_capture           = mt9m001_stop_capture,
++      .set_capture_format     = mt9m001_set_capture_format,
++      .try_fmt_cap            = mt9m001_try_fmt_cap,
++      .formats                = NULL, /* Filled in later depending on the */
++      .num_formats            = 0,    /* camera type and data widths */
++      .get_datawidth          = mt9m001_get_datawidth,
++      .controls               = mt9m001_controls,
++      .num_controls           = ARRAY_SIZE(mt9m001_controls),
++      .get_control            = mt9m001_get_control,
++      .set_control            = mt9m001_set_control,
++};
++
++static int mt9m001_get_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
++{
++      struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
++      int data;
++
++      switch (ctrl->id) {
++      case V4L2_CID_VFLIP:
++              data = reg_read(icd, MT9M001_READ_OPTIONS2);
++              if (data < 0)
++                      return -EIO;
++              ctrl->value = !!(data & 0x8000);
++              break;
++      case V4L2_CID_AUTOEXPOSURE:
++              ctrl->value = mt9m001->autoexposure;
++              break;
++      case V4L2_CID_PRIVATE_BASE:
++              if (1) {
++                      union reg_access_32 u;
++
++                      u.ctrl = ctrl->value;
++                      if (u.reg.rw != REG_READ)
++                              return -EINVAL;
++                      data = reg_read(icd, u.reg.address);
++                      if (data < 0)
++                              return -EIO;
++                      u.reg.value = data;
++                      ctrl->value = u.ctrl;
++              }
++      }
++      return 0;
++}
++
++static int mt9m001_set_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
++{
++      struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
++      const struct v4l2_queryctrl *qctrl;
++      int data;
++
++      qctrl = soc_camera_find_qctrl(&mt9m001_ops, ctrl->id);
++
++      if (!qctrl)
++              return -EINVAL;
++
++      switch (ctrl->id) {
++      case V4L2_CID_VFLIP:
++              if (ctrl->value)
++                      data = reg_set(icd, MT9M001_READ_OPTIONS2, 0x8000);
++              else
++                      data = reg_clear(icd, MT9M001_READ_OPTIONS2, 0x8000);
++              if (data < 0)
++                      return -EIO;
++              break;
++      case V4L2_CID_GAIN:
++              if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
++                      return -EINVAL;
++              /* See Datasheet Table 7, Gain settings. */
++              if (ctrl->value <= qctrl->default_value) {
++                      /* Pack it into 0..1 step 0.125, register values 0..8 */
++                      unsigned long range = qctrl->default_value - qctrl->minimum;
++                      data = ((ctrl->value - qctrl->minimum) * 8 + range / 2) / range;
++
++                      printk("Setting gain %d\n", data);
++                      data = reg_write(icd, MT9M001_GLOBAL_GAIN, data);
++                      if (data < 0)
++                              return -EIO;
++              } else {
++                      /* Pack it into 1.125..15 variable step, register values 9..67 */
++                      /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */
++                      unsigned long range = qctrl->maximum - qctrl->default_value - 1;
++                      unsigned long gain = ((ctrl->value - qctrl->default_value - 1) *
++                                             111 + range / 2) / range + 9;
++
++                      if (gain <= 32)
++                              data = gain;
++                      else if (gain <= 64)
++                              data = ((gain - 32) * 16 + 16) / 32 + 80;
++                      else
++                              data = ((gain - 64) * 7 + 28) / 56 + 96;
++
++                      dev_info(&icd->dev, "Setting gain from %d to %d\n",
++                               reg_read(icd, MT9M001_GLOBAL_GAIN), data);
++                      data = reg_write(icd, MT9M001_GLOBAL_GAIN, data);
++                      if (data < 0)
++                              return -EIO;
++              }
++
++              /* Success */
++              icd->gain = ctrl->value;
++              break;
++      case V4L2_CID_EXPOSURE:
++              /* mt9m001 has maximum == default */
++              if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
++                      return -EINVAL;
++              else {
++                      unsigned long range = qctrl->maximum - qctrl->minimum;
++                      unsigned long shutter = ((ctrl->value - qctrl->minimum) * 1048 +
++                                               range / 2) / range + 1;
++
++                      dev_info(&icd->dev, "Setting shutter width from %d to %lu\n",
++                               reg_read(icd, MT9M001_SHUTTER_WIDTH), shutter);
++                      if (reg_write(icd, MT9M001_SHUTTER_WIDTH, shutter) < 0)
++                              return -EIO;
++                      icd->exposure = ctrl->value;
++                      mt9m001->autoexposure = 0;
++              }
++              break;
++      case V4L2_CID_AUTOEXPOSURE:
++              if (ctrl->value) {
++                      const u16 vblank = 25;
++                      if (reg_write(icd, MT9M001_SHUTTER_WIDTH, icd->height +
++                                    icd->y_skip_top + vblank) < 0)
++                              return -EIO;
++                      qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
++                      icd->exposure = (524 + (icd->height + icd->y_skip_top + vblank - 1) *
++                                       (qctrl->maximum - qctrl->minimum)) /
++                              1048 + qctrl->minimum;
++                      mt9m001->autoexposure = 1;
++              } else
++                      mt9m001->autoexposure = 0;
++              break;
++      case V4L2_CID_PRIVATE_BASE:
++              if (1) {
++                      union reg_access_32 u;
++
++                      u.ctrl = ctrl->value;
++                      if (u.reg.rw != REG_WRITE)
++                              return -EINVAL;
++                      data = reg_write(icd, u.reg.address, u.reg.value);
++                      if (data < 0)
++                              return -EIO;
++              }
++      }
++      return 0;
++}
++
++/* Interface active, can use i2c. If it fails, it can indeed mean, that
++ * this wasn't our capture interface, so, we wait for the right one */
++static int mt9m001_video_probe(struct soc_camera_device *icd)
++{
++      struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
++      s32 data;
++      int ret;
++
++      /* We must have a parent by now. And it cannot be a wrong one.
++       * So this entire test is completely redundant. */
++      if (!icd->dev.parent ||
++          to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
++              return -ENODEV;
++
++      /* Enable the chip */
++      data = reg_write(&mt9m001->icd, MT9M001_CHIP_ENABLE, 1);
++      dev_dbg(&icd->dev, "write: %d\n", data);
++
++      /* Read out the chip version register */
++      data = reg_read(icd, MT9M001_CHIP_VERSION);
++
++      /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */
++      switch (data) {
++      case 0x8411:
++      case 0x8421:
++              mt9m001->model = MT9M001C12ST;
++              mt9m001_ops.formats = mt9m001_colour_formats;
++              mt9m001_ops.num_formats = ARRAY_SIZE(mt9m001_colour_formats);
++              break;
++      case 0x8431:
++              mt9m001->model = MT9M001C12STM;
++              mt9m001_ops.formats = mt9m001_monochrome_formats;
++              if (mt9m001->client->dev.platform_data)
++                      mt9m001_ops.num_formats = ARRAY_SIZE(mt9m001_monochrome_formats);
++              else
++                      mt9m001_ops.num_formats = 1;
++              break;
++      default:
++              ret = -ENODEV;
++              dev_err(&icd->dev,
++                      "No MT9M001 chip detected, register read %x\n", data);
++              goto ei2c;
++      }
++
++      dev_info(&icd->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
++               data == 0x8431 ? "C12STM" : "C12ST");
++
++      /* Now that we know the model, we can start video */
++      ret = soc_camera_video_start(icd);
++      if (ret)
++              goto eisis;
++
++      return 0;
++
++eisis:
++ei2c:
++      return ret;
++}
++
++static void mt9m001_video_remove(struct soc_camera_device *icd)
++{
++      struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
++
++      dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9m001->client->addr,
++              mt9m001->icd.dev.parent, mt9m001->icd.vdev);
++      soc_camera_video_stop(&mt9m001->icd);
++}
++
++static int mt9m001_probe(struct i2c_client *client)
++{
++      struct mt9m001 *mt9m001;
++      struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
++      int ret;
++
++      if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
++              pr_debug("%s: I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n", __FUNCTION__);
++              return -EIO;
++      }
++
++      if (!(mt9m001 = kzalloc(sizeof(struct mt9m001), GFP_KERNEL)))
++              return -ENOMEM;
++
++      mt9m001->client = client;
++      i2c_set_clientdata(client, mt9m001);
++
++      /* Second stage probe - when a capture adapter is there */
++      mt9m001->icd.probe      = mt9m001_video_probe;
++      mt9m001->icd.remove     = mt9m001_video_remove;
++      mt9m001->icd.ops        = &mt9m001_ops;
++      mt9m001->icd.control    = &client->dev;
++      mt9m001->icd.x_min      = 20;
++      mt9m001->icd.y_min      = 12;
++      mt9m001->icd.x_current  = 20;
++      mt9m001->icd.y_current  = 12;
++      mt9m001->icd.width_min  = 48;
++      mt9m001->icd.width_max  = 1280;
++      mt9m001->icd.height_min = 32;
++      mt9m001->icd.height_max = 1024;
++      mt9m001->icd.y_skip_top = 1;
++      /* Default datawidth - this is the only width this camera (normally)
++       * supports. It is only with extra logic that it can support
++       * other widths. Therefore it seems to be a sensible default. */
++      mt9m001->datawidth = 10;
++      /* Simulated autoexposure. If enabled, we calculate shutter width
++       * ourselves in the driver based on vertical blanking and frame width */
++      mt9m001->autoexposure = 1;
++
++      if (client->dev.platform_data) {
++              struct soc_camera_link *icl = client->dev.platform_data;
++              /* We have a data bus switch. We call pca9536 functions
++               * explicitly by name so the driver will not be unloaded,
++               * and we'll check mt9m001->data_switch anyway every time
++               * before calling. The only concern is that the driver
++               * doesn't detach itself from the device, but so far it is
++               * not supported by the I2C layer */
++              if (icl->extender)
++                      mt9m001->data_switch    = *icl->extender;
++              mt9m001->icd.iface      = icl->bus_id;
++      }
++
++      ret = soc_camera_device_register(&mt9m001->icd);
++      if (ret)
++              goto eisdr;
++
++      return 0;
++
++eisdr:
++      kfree(mt9m001);
++      return ret;
++}
++
++static int mt9m001_remove(struct i2c_client *client)
++{
++      struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
++
++      soc_camera_device_unregister(&mt9m001->icd);
++      kfree(mt9m001);
++
++      return 0;
++}
++
++static struct i2c_driver mt9m001_i2c_driver = {
++      .driver = {
++              .name = "mt9m001",
++      },
++      .probe          = mt9m001_probe,
++      .remove         = mt9m001_remove,
++};
++
++static int __init mt9m001_mod_init(void)
++{
++      return i2c_add_driver(&mt9m001_i2c_driver);
++}
++
++static void __exit mt9m001_mod_exit(void)
++{
++      i2c_del_driver(&mt9m001_i2c_driver);
++}
++
++module_init(mt9m001_mod_init);
++module_exit(mt9m001_mod_exit);
++
++MODULE_DESCRIPTION("Micron MT9M001 Camera driver");
++MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
++MODULE_LICENSE("GPL");
+-- 
+1.5.3.4
+
+--
+video4linux-list mailing list
+Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
+https://www.redhat.com/mailman/listinfo/video4linux-list
+

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pxav4l5-8.patch.eml b/packages/linux/linux-ezx-2.6.24/patches/pxav4l5-8.patch.eml
new file mode 100644 (file)
index 0000000..33fbf12
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pxav4l5-8.patch.eml
@@ -0,0 +1,882 @@
+Path: news.gmane.org!not-for-mail
+From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+Newsgroups: gmane.comp.video.video4linux
+Subject: [RFC PATCH 5/8] Add support for the MT9V022 camera
+Date: Wed, 23 Jan 2008 18:41:55 +0100 (CET)
+Lines: 811
+Approved: news@gmane.org
+Message-ID: <Pine.LNX.4.64.0801231826270.4932@axis700.grange>
+References: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+NNTP-Posting-Host: lo.gmane.org
+Mime-Version: 1.0
+Content-Type: TEXT/PLAIN; charset=US-ASCII
+X-Trace: ger.gmane.org 1201110170 28931 80.91.229.12 (23 Jan 2008 17:42:50 GMT)
+X-Complaints-To: usenet@ger.gmane.org
+NNTP-Posting-Date: Wed, 23 Jan 2008 17:42:50 +0000 (UTC)
+To: video4linux-list@redhat.com
+Original-X-From: video4linux-list-bounces@redhat.com Wed Jan 23 18:43:08 2008
+Return-path: <video4linux-list-bounces@redhat.com>
+Envelope-to: rh-video4linux-list@gmane.org
+Original-Received: from hormel.redhat.com ([209.132.177.30])
+       by lo.gmane.org with esmtp (Exim 4.50)
+       id 1JHjcd-0003BV-40
+       for rh-video4linux-list@gmane.org; Wed, 23 Jan 2008 18:42:47 +0100
+Original-Received: from listman.util.phx.redhat.com (listman.util.phx.redhat.com [10.8.4.110])
+       by hormel.redhat.com (Postfix) with ESMTP
+       id C4D7773103; Wed, 23 Jan 2008 12:42:17 -0500 (EST)
+Original-Received: from int-mx1.corp.redhat.com (int-mx1.corp.redhat.com
+       [172.16.52.254])
+       by listman.util.phx.redhat.com (8.13.1/8.13.1) with ESMTP id
+       m0NHgEOS017265 for <video4linux-list@listman.util.phx.redhat.com>;
+       Wed, 23 Jan 2008 12:42:14 -0500
+Original-Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32])
+       by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m0NHgDux028248
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:42:13 -0500
+Original-Received: from mail.gmx.net (mail.gmx.net [213.165.64.20])
+       by mx3.redhat.com (8.13.1/8.13.1) with SMTP id m0NHfhB0001132
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:41:43 -0500
+Original-Received: (qmail invoked by alias); 23 Jan 2008 17:41:36 -0000
+Original-Received: from p57BD2F1F.dip0.t-ipconnect.de (EHLO axis700.grange)
+       [87.189.47.31]
+       by mail.gmx.net (mp007) with SMTP; 23 Jan 2008 18:41:36 +0100
+X-Authenticated: #20450766
+X-Provags-ID: V01U2FsdGVkX195mwEUb8x5N9fm4LtKVLZ+GalahBZqOqI6J/GHUG
+       kn7bBfBiSjX3u4
+Original-Received: from lyakh (helo=localhost)
+       by axis700.grange with local-esmtp (Exim 4.63)
+       (envelope-from <g.liakhovetski@gmx.de>) id 1JHjbn-00029z-Tk
+       for video4linux-list@redhat.com; Wed, 23 Jan 2008 18:41:55 +0100
+X-X-Sender: lyakh@axis700.grange
+In-Reply-To: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+X-Y-GMX-Trusted: 0
+X-RedHat-Spam-Score: 0 
+X-Scanned-By: MIMEDefang 2.58 on 172.16.52.254
+X-Scanned-By: MIMEDefang 2.58 on 172.16.48.32
+X-loop: video4linux-list@redhat.com
+X-BeenThere: video4linux-list@redhat.com
+X-Mailman-Version: 2.1.5
+Precedence: junk
+List-Id: Linux and Kernel Video <video4linux-list.redhat.com>
+List-Unsubscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>, 
+       <mailto:video4linux-list-request@redhat.com?subject=unsubscribe>
+List-Archive: <https://www.redhat.com/mailman/private/video4linux-list>
+List-Post: <mailto:video4linux-list@redhat.com>
+List-Help: <mailto:video4linux-list-request@redhat.com?subject=help>
+List-Subscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>,
+       <mailto:video4linux-list-request@redhat.com?subject=subscribe>
+Original-Sender: video4linux-list-bounces@redhat.com
+Errors-To: video4linux-list-bounces@redhat.com
+Xref: news.gmane.org gmane.comp.video.video4linux:36476
+Archived-At: <http://permalink.gmane.org/gmane.comp.video.video4linux/36476>
+
+This driver supports Micron MT9V022 colour camera.
+
+Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+---
+ drivers/media/video/Kconfig   |   14 +
+ drivers/media/video/Makefile  |    1 +
+ drivers/media/video/mt9v022.c |  751 +++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 766 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/media/video/mt9v022.c
+
+diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
+index def5246..1359f8f 100644
+--- a/drivers/media/video/Kconfig
++++ b/drivers/media/video/Kconfig
+@@ -818,6 +818,20 @@ config MT9M001_PCA9536_SWITCH
+         Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
+         extender to switch between 8 and 10 bit datawidth modes
+ 
++config SOC_CAMERA_MT9V022
++      tristate "mt9v022 support"
++      depends on SOC_CAMERA
++      select SENSORS_PCA9536 if MT9V022_PCA9536_SWITCH
++      help
++        This driver supports MT9V022 cameras from Micron
++
++config MT9V022_PCA9536_SWITCH
++      bool "pca9536 datawidth switch for mt9v022"
++      depends on SOC_CAMERA_MT9V022
++      help
++        Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
++        extender to switch between 8 and 10 bit datawidth modes
++
+ config VIDEO_PXA27X
+       tristate "PXA27x Quick Capture Interface driver"
+       depends on VIDEO_DEV && PXA27x
+diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
+index c56bfdb..6eaf0ad 100644
+--- a/drivers/media/video/Makefile
++++ b/drivers/media/video/Makefile
+@@ -119,5 +119,6 @@ obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+ obj-$(CONFIG_VIDEO_PXA27X)    += pxa_camera.o
+ obj-$(CONFIG_SOC_CAMERA)      += soc_camera.o
+ obj-$(CONFIG_SOC_CAMERA_MT9M001)      += mt9m001.o
++obj-$(CONFIG_SOC_CAMERA_MT9V022)      += mt9v022.o
+ 
+ EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
+new file mode 100644
+index 0000000..d13b965
+--- /dev/null
++++ b/drivers/media/video/mt9v022.c
+@@ -0,0 +1,751 @@
++/*
++ * Driver for MT9V022 CMOS Image Sensor from Micron
++ *
++ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/videodev.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/delay.h>
++#include <linux/log2.h>
++
++#include <media/v4l2-common.h>
++#include <media/v4l2-chip-ident.h>
++#include <media/soc_camera.h>
++
++/* mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c
++ * The platform has to define i2c_board_info
++ * and call i2c_register_board_info() */
++
++static char *sensor_type;
++module_param(sensor_type, charp, S_IRUGO);
++MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"\n");
++
++/* mt9v022 selected register addresses */
++#define MT9V022_CHIP_VERSION          0x00
++#define MT9V022_COLUMN_START          0x01
++#define MT9V022_ROW_START             0x02
++#define MT9V022_WINDOW_HEIGHT         0x03
++#define MT9V022_WINDOW_WIDTH          0x04
++#define MT9V022_HORIZONTAL_BLANKING   0x05
++#define MT9V022_VERTICAL_BLANKING     0x06
++#define MT9V022_CHIP_CONTROL          0x07
++#define MT9V022_SHUTTER_WIDTH1                0x08
++#define MT9V022_SHUTTER_WIDTH2                0x09
++#define MT9V022_SHUTTER_WIDTH_CTRL    0x0a
++#define MT9V022_TOTAL_SHUTTER_WIDTH   0x0b
++#define MT9V022_RESET                 0x0c
++#define MT9V022_READ_MODE             0x0d
++#define MT9V022_MONITOR_MODE          0x0e
++#define MT9V022_PIXEL_OPERATION_MODE  0x0f
++#define MT9V022_LED_OUT_CONTROL               0x1b
++#define MT9V022_ADC_MODE_CONTROL      0x1c
++#define MT9V022_ANALOG_GAIN           0x34
++#define MT9V022_BLACK_LEVEL_CALIB_CTRL        0x47
++#define MT9V022_PIXCLK_FV_LV          0x74
++#define MT9V022_DIGITAL_TEST_PATTERN  0x7f
++#define MT9V022_AEC_AGC_ENABLE                0xAF
++#define MT9V022_MAX_TOTAL_SHUTTER_WIDTH       0xBD
++
++/* Progressive scan, master, defaults */
++#define MT9V022_CHIP_CONTROL_DEFAULT  0x188
++
++/* must be 32 bit, bitwise coded by reg_to_int and int_to_reg below */
++struct reg_access {
++      u16     value;
++      u8      address;
++      u8      rw;
++} __attribute__ ((packed));
++
++union reg_access_32 {
++      struct reg_access       reg;
++      u32                     ctrl;
++};
++
++enum reg_rw { REG_READ = 0, REG_WRITE = 1, };
++
++/*
++#define reg_to_int(rw, address, value) ({                     \
++      union reg_access_32 u = {.reg = {value, address, rw}};  \
++      u.i32;                                                  \
++})
++*/
++
++/* rw has to be numerically most significant, because
++ * maximum, minimum and value are signed */
++#ifdef __LITTLE_ENDIAN
++#define reg_to_int(rw, address, value) (((value) & 0xffff) | (((address) & 0xff) << 16) | (((rw) & 0x7f) << 24))
++#else
++#define reg_to_int(rw, address, value) ((((value) & 0xffff) << 16) | (((address) & 0xff) << 8) | ((rw) & 0x7f))
++#endif
++
++static const struct soc_camera_data_format mt9v022_formats[]= {
++      {
++              .name           = "RGB Bayer (sRGB)",
++              .depth          = 8,
++              .fourcc         = V4L2_PIX_FMT_SBGGR8,
++              .colorspace     = V4L2_COLORSPACE_SRGB,
++      }, {
++              .name           = "RGB Bayer (sRGB)",
++              .depth          = 10,
++              .fourcc         = V4L2_PIX_FMT_SBGGR16,
++              .colorspace     = V4L2_COLORSPACE_SRGB,
++      }, {
++              .name           = "Monochrome 10 bit",
++              .depth          = 10,
++              .fourcc         = V4L2_PIX_FMT_Y16,
++      }, {
++              .name           = "Monochrome 8 bit",
++              .depth          = 8,
++              .fourcc         = V4L2_PIX_FMT_GREY,
++      },
++};
++
++enum mt9v022_sensor {
++      MT9V022_SENSOR_MONOCHROME,
++      MT9V022_SENSOR_COLOUR,
++};
++
++struct mt9v022 {
++      struct i2c_client *client;
++      struct soc_camera_device icd;
++      enum mt9v022_sensor sensor;
++      struct i2c_client *data_switch;
++      u16 chip_control;
++      unsigned char datawidth;
++};
++
++static int reg_read(struct soc_camera_device *icd, const u8 reg)
++{
++      struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
++      struct i2c_client *client = mt9v022->client;
++      s32 data = i2c_smbus_read_word_data(client, reg);
++      return data < 0 ? data : swab16(data);
++}
++
++static int reg_write(struct soc_camera_device *icd, const u8 reg,
++                   const u16 data)
++{
++      struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
++      return i2c_smbus_write_word_data(mt9v022->client, reg, swab16(data));
++}
++
++static int reg_set(struct soc_camera_device *icd, const u8 reg,
++                 const u16 data)
++{
++      int ret;
++
++      if ((ret = reg_read(icd, reg)) < 0)
++              return ret;
++      return reg_write(icd, reg, ret | data);
++}
++
++static int reg_clear(struct soc_camera_device *icd, const u8 reg,
++                   const u16 data)
++{
++      int ret;
++
++      if ((ret = reg_read(icd, reg)) < 0)
++              return ret;
++      return reg_write(icd, reg, ret & ~data);
++}
++
++static int mt9v022_init(struct soc_camera_device *icd)
++{
++      struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
++      int ret;
++
++      /* Almost the default mode: master, parallel, simultaneous, and an
++       * undocumented bit 0x200, which is present in table 7, but not in 8,
++       * plus snapshot mode to disable scan for now */
++//    mt9v022->chip_control |= 0x10;
++      ret = reg_write(icd, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
++      if (ret >= 0)
++              reg_write(icd, MT9V022_READ_MODE, 0x300);
++
++      /* All defaults */
++      if (ret >= 0)
++              ret = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x3); /* AEC, AGC on */
++      if (ret >= 0)
++              ret = reg_write(icd, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480);
++      if (ret >= 0)
++              ret = reg_clear(icd, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1); /* default - auto */
++      if (ret >= 0)
++              ret = reg_write(icd, MT9V022_DIGITAL_TEST_PATTERN, 0);
++
++      return ret < 0 ? ret :0;
++}
++
++static int mt9v022_release(struct soc_camera_device *icd)
++{
++      /* Nothing? */
++      return 0;
++}
++
++static int mt9v022_start_capture(struct soc_camera_device *icd)
++{
++      struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
++      /* Switch to master "normal" mode */
++      mt9v022->chip_control &= ~0x10;
++      if (reg_write(icd, MT9V022_CHIP_CONTROL,
++                    mt9v022->chip_control) < 0)
++              return -EIO;
++      return 0;
++}
++
++static int mt9v022_stop_capture(struct soc_camera_device *icd)
++{
++      struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
++      /* Switch to snapshot mode */
++//    mt9v022->chip_control |= 0x10;
++      if (reg_write(icd, MT9V022_CHIP_CONTROL,
++                    mt9v022->chip_control) < 0)
++              return -EIO;
++      return 0;
++}
++
++extern int pca9536_set_level(struct i2c_client *client, u8 pin, u8 level);
++
++static int external_bus_switch(struct i2c_client *extender, int go8bit)
++{
++      if (! extender)
++              return -ENODEV;
++
++#ifdef CONFIG_MT9V022_PCA9536_SWITCH
++      return pca9536_set_level(extender, 0, go8bit);
++#else
++      return -ENODEV;
++#endif
++}
++
++static int mt9v022_set_capture_format(struct soc_camera_device *icd, __u32 pixfmt,
++                                    struct v4l2_rect *rect, unsigned int flags)
++{
++      struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
++      unsigned int width_flag = flags & (IS_DATAWIDTH_10 | IS_DATAWIDTH_9 |
++                                         IS_DATAWIDTH_8);
++      u16 pixclk = 0;
++      int ret;
++
++      /* Only one width bit may be set */
++      if (!is_power_of_2(width_flag))
++              return -EINVAL;
++
++      /* The caller provides a supported format, as verified per call to
++       * icd->try_fmt_cap(), datawidth is from our supported format list */
++      switch (pixfmt) {
++      case V4L2_PIX_FMT_GREY:
++      case V4L2_PIX_FMT_Y16:
++              if (mt9v022->sensor != MT9V022_SENSOR_MONOCHROME)
++                      return -EINVAL;
++              break;
++      case V4L2_PIX_FMT_SBGGR8:
++      case V4L2_PIX_FMT_SBGGR16:
++              if (mt9v022->sensor != MT9V022_SENSOR_COLOUR)
++                      return -EINVAL;
++              break;
++      case 0:
++              /* No format change, only geometry */
++              break;
++      default:
++              return -EINVAL;
++      }
++
++      /* Like in example app. Contradicts the datasheet though */
++      ret = reg_read(icd, MT9V022_AEC_AGC_ENABLE);
++      if (ret >= 0) {
++              if (ret & 1) /* Autoexposure */
++                      ret = reg_write(icd, MT9V022_MAX_TOTAL_SHUTTER_WIDTH,
++                                      rect->height + icd->y_skip_top + 43);
++              else
++                      ret = reg_write(icd, MT9V022_TOTAL_SHUTTER_WIDTH,
++                                      rect->height + icd->y_skip_top + 43);
++      }
++      /* Setup frame format: defaults apart from width and height */
++      if (ret >= 0)
++              ret = reg_write(icd, MT9V022_COLUMN_START, rect->left);
++      if (ret >= 0)
++              ret = reg_write(icd, MT9V022_ROW_START, rect->top);
++      if (ret >= 0)
++              /* Default 94, Phytec driver says: "width + horizontal blank >= 660" */
++              ret = reg_write(icd, MT9V022_HORIZONTAL_BLANKING,
++                              rect->width > 660 - 43 ? 43 : 660 - rect->width);
++      if (ret >= 0)
++              ret = reg_write(icd, MT9V022_VERTICAL_BLANKING, 45);
++      if (ret >= 0)
++              ret = reg_write(icd, MT9V022_WINDOW_WIDTH, rect->width);
++      if (ret >= 0)
++              ret = reg_write(icd, MT9V022_WINDOW_HEIGHT, rect->height + icd->y_skip_top);
++
++      if (ret < 0)
++              return ret;
++
++      dev_dbg(&icd->dev, "Frame %ux%u pixel\n", rect->width, rect->height);
++
++      if ((mt9v022->datawidth != 10 && (width_flag == IS_DATAWIDTH_10)) ||
++          (mt9v022->datawidth != 9  && (width_flag == IS_DATAWIDTH_9)) ||
++          (mt9v022->datawidth != 8  && (width_flag == IS_DATAWIDTH_8))) {
++              /* data width switch requested */
++              if (! mt9v022->data_switch)
++                      return -EINVAL;
++
++              /* Well, we actually only can do 10 or 8 bits... */
++              if (width_flag == IS_DATAWIDTH_9)
++                      return -EINVAL;
++
++              ret = external_bus_switch(mt9v022->data_switch,
++                                        width_flag == IS_DATAWIDTH_8);
++              if (ret < 0)
++                      return ret;
++
++              mt9v022->datawidth = width_flag == IS_DATAWIDTH_8 ? 8 : 10;
++      }
++
++      if (flags & IS_PCLK_SAMPLE_RISING)
++              pixclk |= 0x10;
++
++      if (! (flags & IS_HSYNC_ACTIVE_HIGH))
++              pixclk |= 0x1;
++
++      if (! (flags & IS_VSYNC_ACTIVE_HIGH))
++              pixclk |= 0x2;
++
++      if ((ret = reg_write(icd, MT9V022_PIXCLK_FV_LV, pixclk)) < 0)
++              return ret;
++
++      if (! (flags & IS_MASTER))
++              mt9v022->chip_control &= ~0x8;
++
++      if ((ret = reg_write(icd, MT9V022_CHIP_CONTROL, mt9v022->chip_control)) < 0)
++              return ret;
++
++      dev_dbg(&icd->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
++              pixclk, mt9v022->chip_control);
++
++      return 0;
++}
++
++static int mt9v022_try_fmt_cap(struct soc_camera_device *icd,
++                             struct v4l2_format *f)
++{
++      if (f->fmt.pix.height < 32 + icd->y_skip_top)
++              f->fmt.pix.height = 32 + icd->y_skip_top;
++      if (f->fmt.pix.height > 480 + icd->y_skip_top)
++              f->fmt.pix.height = 480 + icd->y_skip_top;
++      if (f->fmt.pix.width < 48)
++              f->fmt.pix.width = 48;
++      if (f->fmt.pix.width > 752)
++              f->fmt.pix.width = 752;
++      f->fmt.pix.width &= ~0x03; /* ? */
++
++      return 0;
++}
++
++static unsigned int mt9v022_get_datawidth(struct soc_camera_device *icd)
++{
++      struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
++      return mt9v022->datawidth;
++}
++
++const struct v4l2_queryctrl mt9v022_controls[] = {
++      {
++              .id             = V4L2_CID_VFLIP,
++              .type           = V4L2_CTRL_TYPE_BOOLEAN,
++              .name           = "Flip Vertically",
++              .minimum        = 0,
++              .maximum        = 1,
++              .step           = 1,
++              .default_value  = 0,
++      }, {
++              .id             = V4L2_CID_HFLIP,
++              .type           = V4L2_CTRL_TYPE_BOOLEAN,
++              .name           = "Flip Horizontally",
++              .minimum        = 0,
++              .maximum        = 1,
++              .step           = 1,
++              .default_value  = 0,
++      }, {
++              .id             = V4L2_CID_GAIN,
++              .type           = V4L2_CTRL_TYPE_INTEGER,
++              .name           = "Analog Gain",
++              .minimum        = 64,
++              .maximum        = 127,
++              .step           = 1,
++              .default_value  = 64,
++              .flags          = V4L2_CTRL_FLAG_SLIDER,
++      }, {
++              .id             = V4L2_CID_EXPOSURE,
++              .type           = V4L2_CTRL_TYPE_INTEGER,
++              .name           = "Exposure",
++              .minimum        = 1,
++              .maximum        = 255,
++              .step           = 1,
++              .default_value  = 255,
++              .flags          = V4L2_CTRL_FLAG_SLIDER,
++      }, {
++              .id             = V4L2_CID_AUTOGAIN,
++              .type           = V4L2_CTRL_TYPE_BOOLEAN,
++              .name           = "Automatic Gain",
++              .minimum        = 0,
++              .maximum        = 1,
++              .step           = 1,
++              .default_value  = 1,
++      }, {
++              .id             = V4L2_CID_AUTOEXPOSURE,
++              .type           = V4L2_CTRL_TYPE_BOOLEAN,
++              .name           = "Automatic Exposure",
++              .minimum        = 0,
++              .maximum        = 1,
++              .step           = 1,
++              .default_value  = 1,
++      }, {
++              .id             = V4L2_CID_PRIVATE_BASE,
++              .type           = V4L2_CTRL_TYPE_INTEGER,
++              .name           = "Register access",
++              .minimum        = reg_to_int(REG_READ, 0, 0),
++              .maximum        = reg_to_int(REG_WRITE, 0xff, (1 << 16) - 1),
++              .step           = 1,
++              .default_value  = 1,
++      }
++};
++
++static int mt9v022_get_control(struct soc_camera_device *icd, struct v4l2_control *ctrl);
++static int mt9v022_set_control(struct soc_camera_device *icd, struct v4l2_control *ctrl);
++
++static struct soc_camera_ops mt9v022_ops = {
++      .owner                  = THIS_MODULE,
++      .init                   = mt9v022_init,
++      .release                = mt9v022_release,
++      .start_capture          = mt9v022_start_capture,
++      .stop_capture           = mt9v022_stop_capture,
++      .set_capture_format     = mt9v022_set_capture_format,
++      .try_fmt_cap            = mt9v022_try_fmt_cap,
++      .formats                = mt9v022_formats,
++      .num_formats            = ARRAY_SIZE(mt9v022_formats),
++      .get_datawidth          = mt9v022_get_datawidth,
++      .controls               = mt9v022_controls,
++      .num_controls           = ARRAY_SIZE(mt9v022_controls),
++      .get_control            = mt9v022_get_control,
++      .set_control            = mt9v022_set_control,
++};
++
++static int mt9v022_get_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
++{
++      int data;
++
++      switch (ctrl->id) {
++      case V4L2_CID_VFLIP:
++              data = reg_read(icd, MT9V022_READ_MODE);
++              if (data < 0)
++                      return -EIO;
++              ctrl->value = !!(data & 0x10);
++              break;
++      case V4L2_CID_HFLIP:
++              data = reg_read(icd, MT9V022_READ_MODE);
++              if (data < 0)
++                      return -EIO;
++              ctrl->value = !!(data & 0x20);
++              break;
++      case V4L2_CID_AUTOEXPOSURE:
++              data = reg_read(icd, MT9V022_AEC_AGC_ENABLE);
++              if (data < 0)
++                      return -EIO;
++              ctrl->value = !!(data & 0x1);
++              break;
++      case V4L2_CID_AUTOGAIN:
++              data = reg_read(icd, MT9V022_AEC_AGC_ENABLE);
++              if (data < 0)
++                      return -EIO;
++              ctrl->value = !!(data & 0x2);
++              break;
++      case V4L2_CID_PRIVATE_BASE:
++              if (1) {
++                      union reg_access_32 u;
++
++                      u.ctrl = ctrl->value;
++                      if (u.reg.rw != REG_READ)
++                              return -EINVAL;
++                      data = reg_read(icd, u.reg.address);
++                      if (data < 0)
++                              return -EIO;
++                      u.reg.value = data;
++                      ctrl->value = u.ctrl;
++              }
++      }
++      return 0;
++}
++
++static int mt9v022_set_control(struct soc_camera_device *icd, struct v4l2_control *ctrl)
++{
++      int data;
++      const struct v4l2_queryctrl *qctrl;
++
++      qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
++
++      if (!qctrl)
++              return -EINVAL;
++
++      switch (ctrl->id) {
++      case V4L2_CID_VFLIP:
++              if (ctrl->value)
++                      data = reg_set(icd, MT9V022_READ_MODE, 0x10);
++              else
++                      data = reg_clear(icd, MT9V022_READ_MODE, 0x10);
++              if (data < 0)
++                      return -EIO;
++              break;
++      case V4L2_CID_HFLIP:
++              if (ctrl->value)
++                      data = reg_set(icd, MT9V022_READ_MODE, 0x20);
++              else
++                      data = reg_clear(icd, MT9V022_READ_MODE, 0x20);
++              if (data < 0)
++                      return -EIO;
++              break;
++      case V4L2_CID_GAIN:
++              /* mt9v022 has minimum == default */
++              if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
++                      return -EINVAL;
++              else {
++                      unsigned long range = qctrl->maximum - qctrl->minimum;
++                      /* Datasheet says 16 to 64. autogain only works properly
++                       * after setting gain to maximum 14. Larger values
++                       * produce "white fly" noise effect. On the whole,
++                       * manually setting analog gain does no good. */
++                      unsigned long gain = ((ctrl->value - qctrl->minimum) * 10 +
++                                            range / 2) / range + 4;
++                      if (gain >= 32)
++                              gain &= ~1;
++                      /* The user wants to set gain manually, hope, she
++                       * knows, what she's doing... Switch AGC off. */
++
++                      if (reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
++                              return -EIO;
++
++                      dev_info(&icd->dev, "Setting gain from %d to %lu\n",
++                               reg_read(icd, MT9V022_ANALOG_GAIN), gain);
++                      if (reg_write(icd, MT9V022_ANALOG_GAIN, gain) < 0)
++                              return -EIO;
++                      icd->gain = ctrl->value;
++              }
++              break;
++      case V4L2_CID_EXPOSURE:
++              /* mt9v022 has maximum == default */
++              if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
++                      return -EINVAL;
++              else {
++                      unsigned long range = qctrl->maximum - qctrl->minimum;
++                      unsigned long shutter = ((ctrl->value - qctrl->minimum) * 479 +
++                                               range / 2) / range + 1;
++                      /* The user wants to set shutter width manually, hope, she
++                       * knows, what she's doing... Switch AEC off. */
++
++                      if (reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x1) < 0)
++                              return -EIO;
++
++                      dev_info(&icd->dev, "Setting shutter width from %d to %lu\n",
++                               reg_read(icd, MT9V022_TOTAL_SHUTTER_WIDTH), shutter);
++                      if (reg_write(icd, MT9V022_TOTAL_SHUTTER_WIDTH, shutter) < 0)
++                              return -EIO;
++                      icd->exposure = ctrl->value;
++              }
++              break;
++      case V4L2_CID_AUTOGAIN:
++              if (ctrl->value)
++                      data = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x2);
++              else
++                      data = reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x2);
++              if (data < 0)
++                      return -EIO;
++              break;
++      case V4L2_CID_AUTOEXPOSURE:
++              if (ctrl->value)
++                      data = reg_set(icd, MT9V022_AEC_AGC_ENABLE, 0x1);
++              else
++                      data = reg_clear(icd, MT9V022_AEC_AGC_ENABLE, 0x1);
++              if (data < 0)
++                      return -EIO;
++              break;
++      case V4L2_CID_PRIVATE_BASE:
++              if (1) {
++                      union reg_access_32 u;
++
++                      u.ctrl = ctrl->value;
++                      if (u.reg.rw != REG_WRITE)
++                              return -EINVAL;
++                      data = reg_write(icd, u.reg.address, u.reg.value);
++                      if (data < 0)
++                              return -EIO;
++              }
++      }
++      return 0;
++}
++
++/* Interface active, can use i2c. If it fails, it can indeed mean, that
++ * this wasn't our capture interface, so, we wait for the right one */
++static int mt9v022_video_probe(struct soc_camera_device *icd)
++{
++      struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
++      s32 data;
++      int ret;
++
++      if (!icd->dev.parent ||
++          to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
++              return -ENODEV;
++
++      /* Read out the chip version register */
++      data = reg_read(icd, MT9V022_CHIP_VERSION);
++
++      /* must be 0x1311 or 0x1313 */
++      if (data != 0x1311 && data != 0x1313) {
++              ret = -ENODEV;
++              dev_info(&icd->dev, "No MT9V022 detected, ID register 0x%x\n",
++                       data);
++              goto ei2c;
++      }
++
++      /* Soft reset */
++      ret = reg_write(icd, MT9V022_RESET, 1);
++      if (ret < 0)
++              goto ei2c;
++      /* 15 clock cycles */
++      udelay(200);
++      if (reg_read(icd, MT9V022_RESET)) {
++              dev_err(&icd->dev, "Resetting MT9V022 failed!\n");
++              goto ei2c;
++      }
++
++      /* Set monochrome or colour sensor type */
++      if (sensor_type && (!strcmp("colour", sensor_type) ||
++                          !strcmp("color", sensor_type))) {
++              ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 4 | 0x11);
++              mt9v022->sensor = MT9V022_SENSOR_COLOUR;
++      } else {
++              ret = reg_write(icd, MT9V022_PIXEL_OPERATION_MODE, 0x11);
++              mt9v022->sensor = MT9V022_SENSOR_MONOCHROME;
++      }
++
++      if (ret >= 0)
++              ret = soc_camera_video_start(icd);
++      if (ret < 0)
++              goto eisis;
++
++      dev_info(&icd->dev, "Detected a MT9V022 chip ID %x, %s sensor\n",
++               data, mt9v022->sensor == MT9V022_SENSOR_MONOCHROME ?
++               "monochrome" : "colour");
++
++      return 0;
++
++eisis:
++ei2c:
++      return ret;
++}
++
++static void mt9v022_video_remove(struct soc_camera_device *icd)
++{
++      struct mt9v022 *mt9v022 = container_of(icd, struct mt9v022, icd);
++
++      dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", mt9v022->client->addr,
++              mt9v022->icd.dev.parent, mt9v022->icd.vdev);
++      soc_camera_video_stop(&mt9v022->icd);
++}
++
++static int mt9v022_probe(struct i2c_client *client)
++{
++      struct mt9v022          *mt9v022;
++      struct i2c_adapter      *adapter = to_i2c_adapter(client->dev.parent);
++      int ret;
++
++      if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
++              pr_debug("%s: I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n", __FUNCTION__);
++              return -EIO;
++      }
++
++      if (!(mt9v022 = kzalloc(sizeof(struct mt9v022), GFP_KERNEL)))
++              return -ENOMEM;
++
++      mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
++      mt9v022->client = client;
++      i2c_set_clientdata(client, mt9v022);
++
++      mt9v022->icd.probe      = mt9v022_video_probe;
++      mt9v022->icd.remove     = mt9v022_video_remove;
++      mt9v022->icd.ops        = &mt9v022_ops;
++      mt9v022->icd.control    = &client->dev;
++      mt9v022->icd.x_min      = 1;
++      mt9v022->icd.y_min      = 4;
++      mt9v022->icd.x_current  = 1;
++      mt9v022->icd.y_current  = 4;
++      mt9v022->icd.width_min  = 48;
++      mt9v022->icd.width_max  = 752;
++      mt9v022->icd.height_min = 32;
++      mt9v022->icd.height_max = 480;
++      mt9v022->icd.y_skip_top = 1;
++      /* Default datawidth - this is the only width this camera (normally)
++       * supports. It is only with extra logic that it can support
++       * other widths. Therefore it seems to be a sensible default. */
++      mt9v022->datawidth = 10;
++
++      if (client->dev.platform_data) {
++              struct soc_camera_link *icl = client->dev.platform_data;
++              /* We have a data bus switch. We call pca9536 functions
++               * explicitly by name so the driver will not be unloaded,
++               * and we'll check mt9v022->data_switch anyway every time
++               * before calling. The only concern is that the driver
++               * doesn't detach itself from the device, but so far it is
++               * not supported by the I2C layer */
++              if (icl->extender)
++                      mt9v022->data_switch    = *icl->extender;
++              mt9v022->icd.iface      = icl->bus_id;
++      }
++
++      ret = soc_camera_device_register(&mt9v022->icd);
++      if (ret)
++              goto eisdr;
++
++      return 0;
++
++eisdr:
++      kfree(mt9v022);
++      return ret;
++}
++
++static int mt9v022_remove(struct i2c_client *client)
++{
++      struct mt9v022 *mt9v022 = i2c_get_clientdata(client);
++
++      soc_camera_device_unregister(&mt9v022->icd);
++      kfree(mt9v022);
++
++      return 0;
++}
++
++static struct i2c_driver mt9v022_i2c_driver = {
++      .driver = {
++              .name = "mt9v022",
++      },
++      .probe          = mt9v022_probe,
++      .remove         = mt9v022_remove,
++};
++
++static int __init mt9v022_mod_init(void)
++{
++      return i2c_add_driver(&mt9v022_i2c_driver);
++}
++
++static void __exit mt9v022_mod_exit(void)
++{
++      i2c_del_driver(&mt9v022_i2c_driver);
++}
++
++module_init(mt9v022_mod_init);
++module_exit(mt9v022_mod_exit);
++
++MODULE_DESCRIPTION("Micron MT9V022 Camera driver");
++MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
++MODULE_LICENSE("GPL");
+-- 
+1.5.3.4
+
+--
+video4linux-list mailing list
+Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
+https://www.redhat.com/mailman/listinfo/video4linux-list
+

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pxav4l6-8.patch.eml b/packages/linux/linux-ezx-2.6.24/patches/pxav4l6-8.patch.eml
new file mode 100644 (file)
index 0000000..bc771f2
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pxav4l6-8.patch.eml
@@ -0,0 +1,100 @@
+Path: news.gmane.org!not-for-mail
+From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+Newsgroups: gmane.comp.video.video4linux
+Subject: [RFC PATCH 6/8] Add V4L2_CID_AUTOEXPOSURE control
+Date: Wed, 23 Jan 2008 18:42:01 +0100 (CET)
+Lines: 29
+Approved: news@gmane.org
+Message-ID: <Pine.LNX.4.64.0801231827200.4932@axis700.grange>
+References: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+NNTP-Posting-Host: lo.gmane.org
+Mime-Version: 1.0
+Content-Type: TEXT/PLAIN; charset=US-ASCII
+X-Trace: ger.gmane.org 1201110161 28894 80.91.229.12 (23 Jan 2008 17:42:41 GMT)
+X-Complaints-To: usenet@ger.gmane.org
+NNTP-Posting-Date: Wed, 23 Jan 2008 17:42:41 +0000 (UTC)
+To: video4linux-list@redhat.com
+Original-X-From: video4linux-list-bounces@redhat.com Wed Jan 23 18:43:01 2008
+Return-path: <video4linux-list-bounces@redhat.com>
+Envelope-to: rh-video4linux-list@gmane.org
+Original-Received: from hormel.redhat.com ([209.132.177.30])
+       by lo.gmane.org with esmtp (Exim 4.50)
+       id 1JHjcY-000394-S3
+       for rh-video4linux-list@gmane.org; Wed, 23 Jan 2008 18:42:43 +0100
+Original-Received: from listman.util.phx.redhat.com (listman.util.phx.redhat.com [10.8.4.110])
+       by hormel.redhat.com (Postfix) with ESMTP
+       id 3B00D730EB; Wed, 23 Jan 2008 12:42:16 -0500 (EST)
+Original-Received: from int-mx1.corp.redhat.com (int-mx1.corp.redhat.com
+       [172.16.52.254])
+       by listman.util.phx.redhat.com (8.13.1/8.13.1) with ESMTP id
+       m0NHgEoZ017266 for <video4linux-list@listman.util.phx.redhat.com>;
+       Wed, 23 Jan 2008 12:42:14 -0500
+Original-Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32])
+       by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m0NHgDXf028250
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:42:13 -0500
+Original-Received: from mail.gmx.net (mail.gmx.net [213.165.64.20])
+       by mx3.redhat.com (8.13.1/8.13.1) with SMTP id m0NHfl3q001210
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:41:48 -0500
+Original-Received: (qmail invoked by alias); 23 Jan 2008 17:41:42 -0000
+Original-Received: from p57BD2F1F.dip0.t-ipconnect.de (EHLO axis700.grange)
+       [87.189.47.31]
+       by mail.gmx.net (mp003) with SMTP; 23 Jan 2008 18:41:42 +0100
+X-Authenticated: #20450766
+X-Provags-ID: V01U2FsdGVkX19s1mA+rThsOt7hg+tJ7j4mHAPKhlRXDzhjWNVMNr
+       iM1Yi7GSzlRBY8
+Original-Received: from lyakh (helo=localhost)
+       by axis700.grange with local-esmtp (Exim 4.63)
+       (envelope-from <g.liakhovetski@gmx.de>) id 1JHjbt-0002A2-Vj
+       for video4linux-list@redhat.com; Wed, 23 Jan 2008 18:42:01 +0100
+X-X-Sender: lyakh@axis700.grange
+In-Reply-To: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+X-Y-GMX-Trusted: 0
+X-RedHat-Spam-Score: 0 
+X-Scanned-By: MIMEDefang 2.58 on 172.16.52.254
+X-Scanned-By: MIMEDefang 2.58 on 172.16.48.32
+X-loop: video4linux-list@redhat.com
+X-BeenThere: video4linux-list@redhat.com
+X-Mailman-Version: 2.1.5
+Precedence: junk
+List-Id: Linux and Kernel Video <video4linux-list.redhat.com>
+List-Unsubscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>, 
+       <mailto:video4linux-list-request@redhat.com?subject=unsubscribe>
+List-Archive: <https://www.redhat.com/mailman/private/video4linux-list>
+List-Post: <mailto:video4linux-list@redhat.com>
+List-Help: <mailto:video4linux-list-request@redhat.com?subject=help>
+List-Subscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>,
+       <mailto:video4linux-list-request@redhat.com?subject=subscribe>
+Original-Sender: video4linux-list-bounces@redhat.com
+Errors-To: video4linux-list-bounces@redhat.com
+Xref: news.gmane.org gmane.comp.video.video4linux:36474
+Archived-At: <http://permalink.gmane.org/gmane.comp.video.video4linux/36474>
+
+The MT9V022 camera has hardware AEC support, that can be switched on and 
+off in software. MT9M001 emulates Autoexposure control in software. Add a 
+V4L2 control, similar to already present Autogain.
+
+Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+---
+ include/linux/videodev2.h |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
+index ae9b24c..05b8c22 100644
+--- a/include/linux/videodev2.h
++++ b/include/linux/videodev2.h
+@@ -946,6 +946,7 @@ struct v4l2_querymenu
+ #define V4L2_CID_HCENTER              (V4L2_CID_BASE+22)
+ #define V4L2_CID_VCENTER              (V4L2_CID_BASE+23)
+ #define V4L2_CID_LASTP1                       (V4L2_CID_BASE+24) /* last CID + 1 */
++#define V4L2_CID_AUTOEXPOSURE         (V4L2_CID_BASE+25)
+ 
+ /*  MPEG-class control IDs defined by V4L2 */
+ #define V4L2_CID_MPEG_BASE                    (V4L2_CTRL_CLASS_MPEG | 0x900)
+-- 
+1.5.3.4
+
+--
+video4linux-list mailing list
+Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
+https://www.redhat.com/mailman/listinfo/video4linux-list
+

diff --git a/packages/linux/linux-ezx-2.6.24/patches/pxav4l7-8.patch.eml b/packages/linux/linux-ezx-2.6.24/patches/pxav4l7-8.patch.eml
new file mode 100644 (file)
index 0000000..31d42cf
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/pxav4l7-8.patch.eml
@@ -0,0 +1,113 @@
+Path: news.gmane.org!not-for-mail
+From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+Newsgroups: gmane.comp.video.video4linux
+Subject: [RFC PATCH 7/8] Add two new fourcc codes for 16bpp formats
+Date: Wed, 23 Jan 2008 18:42:09 +0100 (CET)
+Lines: 42
+Approved: news@gmane.org
+Message-ID: <Pine.LNX.4.64.0801231830490.4932@axis700.grange>
+References: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+NNTP-Posting-Host: lo.gmane.org
+Mime-Version: 1.0
+Content-Type: TEXT/PLAIN; charset=US-ASCII
+X-Trace: ger.gmane.org 1201110167 28919 80.91.229.12 (23 Jan 2008 17:42:47 GMT)
+X-Complaints-To: usenet@ger.gmane.org
+NNTP-Posting-Date: Wed, 23 Jan 2008 17:42:47 +0000 (UTC)
+To: video4linux-list@redhat.com
+Original-X-From: video4linux-list-bounces@redhat.com Wed Jan 23 18:43:06 2008
+Return-path: <video4linux-list-bounces@redhat.com>
+Envelope-to: rh-video4linux-list@gmane.org
+Original-Received: from hormel.redhat.com ([209.132.177.30])
+       by lo.gmane.org with esmtp (Exim 4.50)
+       id 1JHjci-0003Dp-8K
+       for rh-video4linux-list@gmane.org; Wed, 23 Jan 2008 18:42:52 +0100
+Original-Received: from listman.util.phx.redhat.com (listman.util.phx.redhat.com [10.8.4.110])
+       by hormel.redhat.com (Postfix) with ESMTP
+       id 6BF2372FF8; Wed, 23 Jan 2008 12:42:25 -0500 (EST)
+Original-Received: from int-mx1.corp.redhat.com (int-mx1.corp.redhat.com
+       [172.16.52.254])
+       by listman.util.phx.redhat.com (8.13.1/8.13.1) with ESMTP id
+       m0NHgO9P017291 for <video4linux-list@listman.util.phx.redhat.com>;
+       Wed, 23 Jan 2008 12:42:24 -0500
+Original-Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32])
+       by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m0NHgNmZ028352
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:42:23 -0500
+Original-Received: from mail.gmx.net (mail.gmx.net [213.165.64.20])
+       by mx3.redhat.com (8.13.1/8.13.1) with SMTP id m0NHfucU001324
+       for <video4linux-list@redhat.com>; Wed, 23 Jan 2008 12:41:56 -0500
+Original-Received: (qmail invoked by alias); 23 Jan 2008 17:41:50 -0000
+Original-Received: from p57BD2F1F.dip0.t-ipconnect.de (EHLO axis700.grange)
+       [87.189.47.31]
+       by mail.gmx.net (mp009) with SMTP; 23 Jan 2008 18:41:50 +0100
+X-Authenticated: #20450766
+X-Provags-ID: V01U2FsdGVkX19aKoUhVR5aPjFgx0HR7/IruYd7urwvhZz+IuYK4j
+       /KvctzVVJXbtdS
+Original-Received: from lyakh (helo=localhost)
+       by axis700.grange with local-esmtp (Exim 4.63)
+       (envelope-from <g.liakhovetski@gmx.de>) id 1JHjc1-0002A6-Re
+       for video4linux-list@redhat.com; Wed, 23 Jan 2008 18:42:09 +0100
+X-X-Sender: lyakh@axis700.grange
+In-Reply-To: <Pine.LNX.4.64.0801231646090.4932@axis700.grange>
+X-Y-GMX-Trusted: 0
+X-RedHat-Spam-Score: 0 
+X-Scanned-By: MIMEDefang 2.58 on 172.16.52.254
+X-Scanned-By: MIMEDefang 2.58 on 172.16.48.32
+X-loop: video4linux-list@redhat.com
+X-BeenThere: video4linux-list@redhat.com
+X-Mailman-Version: 2.1.5
+Precedence: junk
+List-Id: Linux and Kernel Video <video4linux-list.redhat.com>
+List-Unsubscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>, 
+       <mailto:video4linux-list-request@redhat.com?subject=unsubscribe>
+List-Archive: <https://www.redhat.com/mailman/private/video4linux-list>
+List-Post: <mailto:video4linux-list@redhat.com>
+List-Help: <mailto:video4linux-list-request@redhat.com?subject=help>
+List-Subscribe: <https://www.redhat.com/mailman/listinfo/video4linux-list>,
+       <mailto:video4linux-list-request@redhat.com?subject=subscribe>
+Original-Sender: video4linux-list-bounces@redhat.com
+Errors-To: video4linux-list-bounces@redhat.com
+Xref: news.gmane.org gmane.comp.video.video4linux:36475
+Archived-At: <http://permalink.gmane.org/gmane.comp.video.video4linux/36475>
+
+This adds two new fourcc codes (as per info at fourcc.org)
+for 16bpp mono and 16bpp Bayer formats.
+
+Signed-off-by: Steven Whitehouse <steve@chygwyn.com>
+---
+This is a resend of the patch earlier sent by Steven Whitehouse. For some 
+reason, I didn't see the patch in both his emails sent to the list, only 
+in copies I got directly by cc. So, strictly speaking this patch doesn't 
+belong to this series, but I need these 2 codes, and I'm giving the full 
+credit to the original author:-)
+
+ include/linux/videodev2.h |    2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
+index 05b8c22..b2c47c4 100644
+--- a/include/linux/videodev2.h
++++ b/include/linux/videodev2.h
+@@ -280,6 +280,7 @@ struct v4l2_pix_format
+ #define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B','G','R','4') /* 32  BGR-8-8-8-8   */
+ #define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R','G','B','4') /* 32  RGB-8-8-8-8   */
+ #define V4L2_PIX_FMT_GREY    v4l2_fourcc('G','R','E','Y') /*  8  Greyscale     */
++#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y','1','6',' ') /* 16  Greyscale     */
+ #define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y','V','U','9') /*  9  YVU 4:1:0     */
+ #define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y','V','1','2') /* 12  YVU 4:2:0     */
+ #define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y','U','Y','V') /* 16  YUV 4:2:2     */
+@@ -302,6 +303,7 @@ struct v4l2_pix_format
+ 
+ /* see http://www.siliconimaging.com/RGB%20Bayer.htm */
+ #define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B','A','8','1') /*  8  BGBG.. GRGR.. */
++#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B','Y','R','2') /* 16  BGBG.. GRGR.. */
+ 
+ /* compressed formats */
+ #define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M','J','P','G') /* Motion-JPEG   */
+-- 
+1.5.3.4
+
+--
+video4linux-list mailing list
+Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
+https://www.redhat.com/mailman/listinfo/video4linux-list
+

diff --git a/packages/linux/linux-ezx-2.6.24/patches/series b/packages/linux/linux-ezx-2.6.24/patches/series
new file mode 100644 (file)
index 0000000..5fb6a2b
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/patches/series
@@ -0,0 +1,105 @@
+binutils-buildid-arm.patch
+pxa27x_overlay-r8.patch
+
+ezx-core.patch
+# ezx-core TODO: should be ezx-common
+# look at the pxa-regs.h diff and put each definition on the proper patch
+# register a machine type for each phone model
+
+# enable this patch ONLY if you have STUART connected and dont forget
+# to change your cmdline if you want console on STUART.
+#ezx-enable-stuart.patch
+
+ezx-bp.patch
+# ezx-bp TODO:
+# try to run this as a module - this may solve timing issues for opentapi.
+# suspend/resume (not sure if it can be handled here)
+# implement 2nd gen handshake support
+# move platform device to ezx-phone.c
+
+ezx-pm.patch
+
+ezx-pcap.patch
+# ezx-pcap TODO:
+# move vibrator level function to the vibrator driver
+
+a780-pcap.patch
+e680-pcap.patch
+a1200-pcap.patch
+e6-pcap.patch
+
+a780-mci.patch
+e680-mci.patch
+a1200-mci.patch
+e6-mci.patch
+
+pxa27x-udc-support.3.patch
+
+ezx-emu.patch
+# ezx-emu TODO:
+# userspace interface for controling emu
+# read adc to find which accessory is plugged
+a780-emu.patch
+e680-emu.patch
+
+pxa27x-udc-fix-a1200.patch #(see ezx-a1200.c)
+ezx-eoc.patch
+a1200-eoc.patch
+e6-eoc.patch
+
+ezx-mtd-map.patch
+
+ezx-serial-bug-workaround.patch
+
+pxa-kbd.patch
+a780-kbd.patch
+e680-kbd.patch
+a1200-kbd.patch
+
+pcap-ts.patch
+a780-ts.patch
+e680-ts.patch
+a1200-ts.patch
+e6-ts.patch
+
+ezx-backlight.patch
+
+a780-flip.patch
+e680-locksw.patch
+a1200-flip.patch
+
+a780-leds.patch
+e680-leds.patch
+
+a780-vibrator.patch
+
+# mux_cli patches
+mux_cli.patch
+mux-fix.patch
+mux-fix-init-errorpath.patch
+mux-remove-flipbuffers.patch
+mux-remove-get_halted_bit.patch
+mux-remove-usbh_finished_resume.patch
+mux-fix-makefile.patch
+mux-fix-tty-driver.patch
+mux-linux-2.6.21-fix.patch
+#mux-ifdef-ezx-features.patch
+#mux_debug.patch
+
+asoc-pxa-ssp.patch
+asoc-fix-loopback.patch
+ezx-asoc.patch
+
+# mux_cli TODO:
+# merge patches
+# try to understand the code and cleanup (painful)
+
+# Global TODO:
+# compile everything as module and test for insmod/rmmod
+#      can NOT run as module (yet)
+#              pxa-ohci, ts0710_mux, ts0710_mux_usb, ezx-bp
+
+# the folowing break too much stuff on other phones.
+
+# incomplete
+

diff --git a/packages/linux/linux-ezx-2.6.24/rokre2/.mtn2git_empty b/packages/linux/linux-ezx-2.6.24/rokre2/.mtn2git_empty
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/packages/linux/linux-ezx-2.6.24/rokre2/defconfig b/packages/linux/linux-ezx-2.6.24/rokre2/defconfig
new file mode 100755 (executable)
index 0000000..206ae45
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/rokre2/defconfig
@@ -0,0 +1,1189 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23.1
+# Wed Oct 24 18:05:01 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+CONFIG_PXA_EZX=y
+# CONFIG_PXA_EZX_E680 is not set
+# CONFIG_PXA_EZX_A780 is not set
+# CONFIG_PXA_EZX_E2 is not set
+CONFIG_PXA_EZX_A1200=y
+# CONFIG_PXA_EZX_E6 is not set
+# CONFIG_EZX_BP is not set
+CONFIG_EZX_PCAP=y
+CONFIG_EZX_EOC=y
+# CONFIG_EZX_EMU is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_SUSPEND is not set
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_EZX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_EZX is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA2XX_SOC_SSP=y
+CONFIG_SND_PXA2XX_SOC_EZX=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_PCAP2=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

diff --git a/packages/linux/linux-ezx-2.6.24/rokre6/.mtn2git_empty b/packages/linux/linux-ezx-2.6.24/rokre6/.mtn2git_empty
new file mode 100644 (file)
index 0000000..e69de29

diff --git a/packages/linux/linux-ezx-2.6.24/rokre6/defconfig b/packages/linux/linux-ezx-2.6.24/rokre6/defconfig
new file mode 100755 (executable)
index 0000000..733566a
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/rokre6/defconfig
@@ -0,0 +1,1203 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23.1
+# Wed Oct 24 18:07:51 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+CONFIG_PXA_EZX=y
+# CONFIG_PXA_EZX_E680 is not set
+# CONFIG_PXA_EZX_A780 is not set
+# CONFIG_PXA_EZX_E2 is not set
+# CONFIG_PXA_EZX_A1200 is not set
+CONFIG_PXA_EZX_E6=y
+# CONFIG_EZX_BP is not set
+CONFIG_EZX_PCAP=y
+CONFIG_EZX_EOC=y
+# CONFIG_EZX_EMU is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_SUSPEND is not set
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_EZX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_EZX is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA2XX_SOC_SSP=y
+CONFIG_SND_PXA2XX_SOC_EZX=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_PCAP2=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

diff --git a/packages/linux/linux-ezx-2.6.24/update_patches.sh b/packages/linux/linux-ezx-2.6.24/update_patches.sh
new file mode 100644 (file)
index 0000000..9a8d36e
--- /dev/null
+++ b/packages/linux/linux-ezx-2.6.24/update_patches.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+set -e
+
+# Helper script to update patches and speedup filling the SRC_URI section of our .bb
+# Run it while in packages/linux/linux-ezx-2.6.x/
+
+[ -d patches ] && mtn drop -R patches
+rm -rf patches
+
+svn --quiet co http://svn.openezx.org/branches/kernel-2.6.24.x-patches patches
+find patches -type f -print0 
+mtn add patches patches/*
+
+cat patches/series | grep ^[0-9A-Za-z] | sed -e 's/.*/\tfile:\/\/patches\/\0;patch=1 \\/'
+ls -1 patches/defconfig-* | sed -e 's/.*/\tfile:\/\/\0 \\/'
+

diff --git a/packages/linux/linux-ezx_2.6.24.bb b/packages/linux/linux-ezx_2.6.24.bb
new file mode 100644 (file)
index 0000000..093ee1e
--- /dev/null
+++ b/packages/linux/linux-ezx_2.6.24.bb
@@ -0,0 +1,111 @@
+DESCRIPTION = "2.6 Linux Development Kernel for the Motorola GSM phones A780 and E680"
+AUTHOR = "The OpenEZX Team <openezx-devel@lists.openezx.org>"
+HOMEPAGE = "http://www.openezx.org"
+EZX = "ezxdev"
+PR = "${EZX}-r0"
+
+# unstable branch, use 2.6.21 if you want something working
+DEFAULT_PREFERENCE = "-99"
+DEFAULT_PREFERENCE_a780 = "99"
+
+
+# last sync: svn revision XXX 
+
+require linux.inc
+
+RPSRC = "http://www.rpsys.net/openzaurus/patches/archive"
+
+SRC_URI = " \
+    ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
+    file://logo_linux_clut224.ppm \
+    \
+        file://patches/binutils-buildid-arm.patch;patch=1 \
+        file://patches/pxa27x_overlay-r8.patch;patch=1 \
+        file://patches/ezx-core.patch;patch=1 \
+        file://patches/ezx-bp.patch;patch=1 \
+        file://patches/ezx-pm.patch;patch=1 \
+        file://patches/ezx-pcap.patch;patch=1 \
+        file://patches/a780-pcap.patch;patch=1 \
+        file://patches/e680-pcap.patch;patch=1 \
+        file://patches/a1200-pcap.patch;patch=1 \
+        file://patches/e6-pcap.patch;patch=1 \
+        file://patches/a780-mci.patch;patch=1 \
+        file://patches/e680-mci.patch;patch=1 \
+        file://patches/a1200-mci.patch;patch=1 \
+        file://patches/e6-mci.patch;patch=1 \
+        file://patches/pxa27x-udc-support.3.patch;patch=1 \
+        file://patches/ezx-emu.patch;patch=1 \
+        file://patches/a780-emu.patch;patch=1 \
+        file://patches/e680-emu.patch;patch=1 \
+        file://patches/pxa27x-udc-fix-a1200.patch;patch=1 \
+        file://patches/ezx-eoc.patch;patch=1 \
+        file://patches/a1200-eoc.patch;patch=1 \
+        file://patches/e6-eoc.patch;patch=1 \
+        file://patches/ezx-mtd-map.patch;patch=1 \
+        file://patches/ezx-serial-bug-workaround.patch;patch=1 \
+        file://patches/pxa-kbd.patch;patch=1 \
+        file://patches/a780-kbd.patch;patch=1 \
+        file://patches/e680-kbd.patch;patch=1 \
+        file://patches/a1200-kbd.patch;patch=1 \
+        file://patches/pcap-ts.patch;patch=1 \
+        file://patches/a780-ts.patch;patch=1 \
+        file://patches/e680-ts.patch;patch=1 \
+        file://patches/a1200-ts.patch;patch=1 \
+        file://patches/e6-ts.patch;patch=1 \
+        file://patches/ezx-backlight.patch;patch=1 \
+        file://patches/a780-flip.patch;patch=1 \
+        file://patches/e680-locksw.patch;patch=1 \
+        file://patches/a1200-flip.patch;patch=1 \
+        file://patches/a780-leds.patch;patch=1 \
+        file://patches/e680-leds.patch;patch=1 \
+        file://patches/a780-vibrator.patch;patch=1 \
+        file://patches/mux_cli.patch;patch=1 \
+        file://patches/mux-fix.patch;patch=1 \
+        file://patches/mux-fix-init-errorpath.patch;patch=1 \
+        file://patches/mux-remove-flipbuffers.patch;patch=1 \
+        file://patches/mux-remove-get_halted_bit.patch;patch=1 \
+        file://patches/mux-remove-usbh_finished_resume.patch;patch=1 \
+        file://patches/mux-fix-makefile.patch;patch=1 \
+        file://patches/mux-fix-tty-driver.patch;patch=1 \
+        file://patches/mux-linux-2.6.21-fix.patch;patch=1 \
+        file://patches/asoc-pxa-ssp.patch;patch=1 \
+        file://patches/asoc-fix-loopback.patch;patch=1 \
+        file://patches/ezx-asoc.patch;patch=1 \
+        file://defconfig \
+       "
+
+S = "${WORKDIR}/linux-${PV}"
+
+
+##############################################################
+# kernel image resides on a seperate flash partition (for now)
+# But we can flash it from userspace (flash_unlock /dev/mtdX && flash_eraseall /dev/mtdX && flashcp /boot/zImage /dev/mtdX)
+# so lets make a package of it. What about a postinst that flashes the new kernel?
+
+COMPATIBLE_HOST = "arm.*-linux"
+COMPATIBLE_MACHINE = '(a780|e680|a1200|rorkre2|rokre6)'
+
+# For now the code for serial console is disabled in compress.c
+#CMDLINE_CON = "console=ttyS2,115200n8 console=tty1 "
+CMDLINE_CON = "console=tty1 "
+
+CMDLINE_ROOT = "root=/dev/mmcblk0p2 rootfstype=ext2 rootwait=1"
+CMDLINE_NFSROOT = "root=/dev/nfs rootfstype=nfs nfsroot=192.168.0.200:/export/ezx-image rootdelay=1 "
+# Uncomment to enable dyntick
+#CMDLINE_OTHER = "dyntick=enable"
+CMDLINE_DEBUG = '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug",d)}'
+CMDLINE_IP = "ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0"
+CMDLINE_MEM = "mem=32M@0xA0000000 mem=16M@0xAC000000"
+CMDLINE = "${CMDLINE_CON} ${CMDLINE_ROOT} ${CMDLINE_IP} ${CMDLINE_ROTATE} ${CMDLINE_OTHER} ${CMDLINE_DEBUG} ${CMDLINE_MEM}"
+# Uncomment to use root-over-nfs-over-usb
+#CMDLINE_NFSROOT_USB = "${CMDLINE_CON} ${CMDLINE_NFSROOT} ${CMDLINE_IP} ${CMDLINE_ROTATE} ${CMDLINE_OTHER} ${CMDLINE_DEBUG} ${CMDLINE_MEM}"
+
+# 1024x1024 once was the maximum kernel size for boot-over-usb -- is it still?
+#KERNEL_IMAGE_MAXSIZE = "1294336"
+
+###############################################################
+# module configs specific to this kernel
+#
+#module_autoload_pxaficp_ir = "pxaficp_ir"
+#module_autoload_snd-pcm-oss = "snd-pcm-oss"
+